Search Results

Search found 1522 results on 61 pages for 'passwords'.

Page 34/61 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

  • COPSSH RSA only authentication connection problem

    - by Siriss
    Hello all- I am trying to setup an RSA Authentication only SSH/SFTP server. The SSH will be used primarily for RDC. Everything works just fine if I use password authentication. I am using Putty Key Generator to create he keys and I have pasted the key into authorized_keys file and restarted the OpenSSH server. I am using FileZilla to test the SFTP connection as that is the most important. For my tests I have created the keys without password correction. It will not work with a standard SSH connection either. It says "Server refused our key". I have recreated the key twice double checking with a guide on google, and I am pretty sure I did it correctly. I load the key file into FileZilla under settings/SFTP and try to connect and I get the following error: Disconnected: No supported authentication methods available. I have been playing with the different settings all night and I cannot figure it out. Here is my sshd_config file: # $OpenBSD: sshd_config,v 1.80 2008/07/02 02:24:18 djm Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. #Port 22 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # Disable legacy (protocol version 1) support in the server for new # installations. In future the default will change to require explicit # activation of protocol 1 Protocol 2 # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 1024 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH #LogLevel INFO # Authentication: #LoginGraceTime 2m PermitRootLogin no #StrictModes yes #MaxAuthTries 6 #MaxSessions 10 RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! PasswordAuthentication no PermitEmptyPasswords no # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. UsePAM no #AllowAgentForwarding yes #AllowTcpForwarding yes #GatewayPorts no #X11Forwarding no #X11DisplayOffset 10 #X11UseLocalhost yes #PrintMotd yes #PrintLastLog yes #TCPKeepAlive yes UseLogin no #UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner none # override default of no subsystems Subsystem sftp /bin/sftp-server # Example of overriding settings on a per-user basis #Match User anoncvs # X11Forwarding no # AllowTcpForwarding no # ForceCommand cvs server Thank you so much for your help!

    Read the article

  • All client browsers repeatedly asking for NTLM authentication when running through local proxy server

    - by Marko
    All client browsers repeatedly asking for NTLM authentication when running through local proxy server. When pointing browsers through the local proxy to the internet, some but not all clients are being repeatedley prompted to authenticate to the proxy server. I have inspected the headers using firefox live headers as well as fiddler, and in all cases the authentication prompts happen when requesting SSL resources. an example of this would be as follows: GET http://gmail.google.com/mail/ HTTP/1.1 Accept: image/gif, image/jpeg, image/pjpeg, image/pjpeg, application/x-shockwave- flash, application/x-ms-application, application/x-ms-xbap, application/vnd.ms- xpsdocument, application/xaml+xml, */* Accept-Language: en-gb User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729) Accept-Encoding: gzip, deflate Proxy-Connection: Keep-Alive Host: gmail.google.com GET http://gmail.google.com/mail/ HTTP/1.1 Accept: image/gif, image/jpeg, image/pjpeg, image/pjpeg, application/x-shockwave- flash, application/x-ms-application, application/x-ms-xbap, application/vnd.ms- xpsdocument, application/xaml+xml, */* Accept-Language: en-gb User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729) Accept-Encoding: gzip, deflate Proxy-Connection: Keep-Alive Host: gmail.google.com Proxy-Authorization: NTLM TlRMTVNTUAABAAAAB7IIogkACQAvAAAABwAHACgAAAAFASgKAAAAD1dJTlhQMUdGTEFHU0hJUDc= GET http://gmail.google.com/mail/ HTTP/1.1 Accept: image/gif, image/jpeg, image/pjpeg, image/pjpeg, application/x-shockwave- flash, application/x-ms-application, application/x-ms-xbap, application/vnd.ms- xpsdocument, application/xaml+xml, */* Accept-Language: en-gb User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729) Accept-Encoding: gzip, deflate Proxy-Connection: Keep-Alive Proxy-Authorization: NTLM TlRMTVNTUAADA (more stuff goes here I cut it short) Host: gmail.google.com At this point the username and password prompt has appeared in the browser, it does not matter what is typed into this box, correct credentials, random nonsense the browser does not accept anything in this box it will continue to popup. If I press cancel, I sometimes get a http 407 error, but on other occasions I click cancel the website proceeds to download and show normally. This is repeatable with some clients running through my proxy server, but in other cases it does not happen at all. In the cases where a client computer works normally, the only difference I can see is that the 3rd request for SSL resource comes back with a 200 response, see below: CONNECT gmail.google.com:443 HTTP/1.0 User-Agent: Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; Trident/5.0; MALC) Proxy-Connection: Keep-Alive Content-Length: 0 Host: gmail.google.com Pragma: no-cache Proxy-Authorization: NTLM TlRMTVNTUAADAAAAGAAYAIAAAA A SSLv3-compatible ClientHello handshake was found. I have tried resetting user accounts as well as computer accounts in Active Directory. User accounts and passwords that are being used are correct and the passwords have been reset so they are not out of sync. I have removed the clients and even the proxy server from the domain, and rejoined them. I have installed a complete separate proxy server and get exactly the same problem when I point clients to a different proxy server on a different IP address.

    Read the article

  • Lockdown users on Windows Server 2012

    - by el.severo
    I set up a Active Directory on a server machine with Windows Server 2012 and I'd like to create some users with limitations like Windows Steady State does in Windows XP (locally). Seen already the Windows SteadyState Handbook (with Windows Server 2008), but I'd like to know if anyone has tried this before, the limitations are the following: 1. Prevent locked or roaming user profiles that cannot be found on the computer from logging on 2. Do not cache copies of locked or roaming user profiles for users who have previously logged on to this computer 3. Do not allow Windows to compute and store passwords using LAN Manager Hash values 4. Do not store usernames or passwords used to log on to the Windows Live ID or the domain 5. Prevent users from creating folders and files on drive C:\ 6. Lock profile to prevent the user from making permanent changes 7. Remove the Control Panel, Printer and Network Settings from the Classic Start menu 8. Remove the Favorites icon 9. Remove the My Network Places icon 10. Remove the Frequently Used Program list 11. Remove the Shared documents folder from My Computer 12. Remove control Panel icon 13. Remove the Set Program Access and Defaults icon 14. Remove the Network Connection(Connect To)icon 15. Remove the Printers and Faxes icon 16. Remove the Run icon 17. Prevent access to Windows Explorer features: Folder Options, Customize Toolbar, and the Notification Area 18. Prevent access to the taskbar 19. Prevent access to the command prompt 20. Prevent access to the registry editor 21. Prevent access to the Task Manager 22. Prevent access to Microsoft Management Console utilities 23. Prevent users from adding or removing printers 24. Prevent users from locking the computer 25. Prevent password changes (also requires the Control Panel icon to be removed) 26. Disable System Tools and other management programs 27. Prevent users from saving files to the desktop 28. Hide A Drive 29. Hide B Drive 30. Hide C Drive 31. Prevent changes to Internet Explorer registry settings 32. Empty the Temporary Internet Files folder when Internet Explorer is closed 33. Remove Internet Options 34. Remove General tab in Internet Options 35. Remove Security tab in Internet Options 36. Remove Privacy tab in Internet Options 37. Remove Content tab in Internet Options 38. Remove Connections tab in Internet Options 39. Remove Programs tab in Internet Options 40. Remove Advanced tab in Internet Options 41. Set a home page (Internet Explorer) 42. Restrict the possibility to change desktop image 43. Restrict the possibility to change wallpaper 44. Restrict usb flash drives Any suggestions for this? UPDATE: As @Dan suggested me I'd like to specify that would be applied to a educational scenario where students can login from a computer and want to add some restrictions to them.

    Read the article

  • Change or Reset Windows Password from a Ubuntu Live CD

    - by Trevor Bekolay
    If you can’t log in even after trying your twelve passwords, or you’ve inherited a computer complete with password-protected profiles, worry not – you don’t have to do a fresh install of Windows. We’ll show you how to change or reset your Windows password from a Ubuntu Live CD. This method works for all of the NT-based version of Windows – anything from Windows 2000 and later, basically. And yes, that includes Windows 7. You’ll need a Ubuntu 9.10 Live CD, or a bootable Ubuntu 9.10 Flash Drive. If you don’t have one, or have forgotten how to boot from the flash drive, check out our article on creating a bootable Ubuntu 9.10 flash drive. The program that lets us manipulate Windows passwords is called chntpw. The steps to install it are different in 32-bit and 64-bit versions of Ubuntu. Installation: 32-bit Open up Synaptic Package Manager by clicking on System at the top of the screen, expanding the Administration section, and clicking on Synaptic Package Manager. chntpw is found in the universe repository. Repositories are a way for Ubuntu to group software together so that users are able to choose if they want to use only completely open source software maintained by Ubuntu developers, or branch out and use software with different licenses and maintainers. To enable software from the universe repository, click on Settings > Repositories in the Synaptic window. Add a checkmark beside the box labeled “Community-maintained Open Source software (universe)” and then click close. When you change the repositories you are selecting software from, you have to reload the list of available software. In the main Synaptic window, click on the Reload button. The software lists will be downloaded. Once downloaded, Synaptic must rebuild its search index. The label over the text field by the Search button will read “Rebuilding search index.” When it reads “Quick search,” type chntpw in the text field. The package will show up in the list. Click on the checkbox near the chntpw name. Click on Mark for Installation. chntpw won’t actually be installed until you apply the changes you’ve made, so click on the Apply button in the Synaptic window now. You will be prompted to accept the changes. Click Apply. The changes should be applied quickly. When they’re done, click Close. chntpw is now installed! You can close Synaptic Package Manager. Skip to the section titled Using chntpw to reset your password. Installation: 64-bit The version of chntpw available in Ubuntu’s universe repository will not work properly on a 64-bit machine. Fortunately, a patched version exists in Debian’s Unstable branch, so let’s download it from there and install it manually. Open Firefox. Whether it’s your preferred browser or not, it’s very readily accessible in the Ubuntu Live CD environment, so it will be the easiest to use. There’s a shortcut to Firefox in the top panel. Navigate to http://packages.debian.org/sid/amd64/chntpw/download and download the latest version of chntpw for 64-bit machines. Note: In most cases it would be best to add the Debian Unstable branch to a package manager, but since the Live CD environment will revert to its original state once you reboot, it’ll be faster to just download the .deb file. Save the .deb file to the default location. You can close Firefox if desired. Open a terminal window by clicking on Applications at the top-left of the screen, expanding the Accessories folder, and clicking on Terminal. In the terminal window, enter the following text, hitting enter after each line: cd Downloadssudo dpkg –i chntpw* chntpw will now be installed. Using chntpw to reset your password Before running chntpw, you will have to mount the hard drive that contains your Windows installation. In most cases, Ubuntu 9.10 makes this simple. Click on Places at the top-left of the screen. If your Windows drive is easily identifiable – usually by its size – then left click on it. If it is not obvious, then click on Computer and check out each hard drive until you find the correct one. The correct hard drive will have the WINDOWS folder in it. When you find it, make a note of the drive’s label that appears in the menu bar of the file browser. If you don’t already have one open, start a terminal window by going to Applications > Accessories > Terminal. In the terminal window, enter the commands cd /medials pressing enter after each line. You should see one or more strings of text appear; one of those strings should correspond with the string that appeared in the title bar of the file browser earlier. Change to that directory by entering the command cd <hard drive label> Since the hard drive label will be very annoying to type in, you can use a shortcut by typing in the first few letters or numbers of the drive label (capitalization matters) and pressing the Tab key. It will automatically complete the rest of the string (if those first few letters or numbers are unique). We want to switch to a certain Windows directory. Enter the command: cd WINDOWS/system32/config/ Again, you can use tab-completion to speed up entering this command. To change or reset the administrator password, enter: sudo chntpw SAM SAM is the file that contains your Windows registry. You will see some text appear, including a list of all of the users on your system. At the bottom of the terminal window, you should see a prompt that begins with “User Edit Menu:” and offers four choices. We recommend that you clear the password to blank (you can always set a new password in Windows once you log in). To do this, enter “1” and then “y” to confirm. If you would like to change the password instead, enter “2”, then your desired password, and finally “y” to confirm. If you would like to reset or change the password of a user other than the administrator, enter: sudo chntpw –u <username> SAM From here, you can follow the same steps as before: enter “1” to reset the password to blank, or “2” to change it to a value you provide. And that’s it! Conclusion chntpw is a very useful utility provided for free by the open source community. It may make you think twice about how secure the Windows login system is, but knowing how to use chntpw can save your tail if your memory fails you two or eight times! Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDChange Your Forgotten Windows Password with the Linux System Rescue CDHow to Create and Use a Password Reset Disk in Windows Vista & Windows 7Reset Your Forgotten Password the Easy Way Using the Ultimate Boot CD for WindowsHow to install Spotify in Ubuntu 9.10 using Wine TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Add a Custom Title in IE using Spybot or Spyware Blaster When You Need to Hail a Taxi in NYC Live Map of Marine Traffic NoSquint Remembers Site Specific Zoom Levels (Firefox) New Firefox release 3.6.3 fixes 1 Critical bug Dark Side of the Moon (8-bit)

    Read the article

  • Windows 8.1 Will Start Encrypting Hard Drives By Default: Everything You Need to Know

    - by Chris Hoffman
    Windows 8.1 will automatically encrypt the storage on modern Windows PCs. This will help protect your files in case someone steals your laptop and tries to get at them, but it has important ramifications for data recovery. Previously, “BitLocker” was available on Professional and Enterprise editions of Windows, while “Device Encryption” was available on Windows RT and Windows Phone. Device encryption is included with all editions of Windows 8.1 — and it’s on by default. When Your Hard Drive Will Be Encrypted Windows 8.1 includes “Pervasive Device Encryption.” This works a bit differently from the standard BitLocker feature that has been included in Professional, Enterprise, and Ultimate editions of Windows for the past few versions. Before Windows 8.1 automatically enables Device Encryption, the following must be true: The Windows device “must support connected standby and meet the Windows Hardware Certification Kit (HCK) requirements for TPM and SecureBoot on ConnectedStandby systems.”  (Source) Older Windows PCs won’t support this feature, while new Windows 8.1 devices you pick up will have this feature enabled by default. When Windows 8.1 installs cleanly and the computer is prepared, device encryption is “initialized” on the system drive and other internal drives. Windows uses a clear key at this point, which is removed later when the recovery key is successfully backed up. The PC’s user must log in with a Microsoft account with administrator privileges or join the PC to a domain. If a Microsoft account is used, a recovery key will be backed up to Microsoft’s servers and encryption will be enabled. If a domain account is used, a recovery key will be backed up to Active Directory Domain Services and encryption will be enabled. If you have an older Windows computer that you’ve upgraded to Windows 8.1, it may not support Device Encryption. If you log in with a local user account, Device Encryption won’t be enabled. If you upgrade your Windows 8 device to Windows 8.1, you’ll need to enable device encryption, as it’s off by default when upgrading. Recovering An Encrypted Hard Drive Device encryption means that a thief can’t just pick up your laptop, insert a Linux live CD or Windows installer disc, and boot the alternate operating system to view your files without knowing your Windows password. It means that no one can just pull the hard drive from your device, connect the hard drive to another computer, and view the files. We’ve previously explained that your Windows password doesn’t actually secure your files. With Windows 8.1, average Windows users will finally be protected with encryption by default. However, there’s a problem — if you forget your password and are unable to log in, you’d also be unable to recover your files. This is likely why encryption is only enabled when a user logs in with a Microsoft account (or connects to a domain). Microsoft holds a recovery key, so you can gain access to your files by going through a recovery process. As long as you’re able to authenticate using your Microsoft account credentials — for example, by receiving an SMS message on the cell phone number connected to your Microsoft account — you’ll be able to recover your encrypted data. With Windows 8.1, it’s more important than ever to configure your Microsoft account’s security settings and recovery methods so you’ll be able to recover your files if you ever get locked out of your Microsoft account. Microsoft does hold the recovery key and would be capable of providing it to law enforcement if it was requested, which is certainly a legitimate concern in the age of PRISM. However, this encryption still provides protection from thieves picking up your hard drive and digging through your personal or business files. If you’re worried about a government or a determined thief who’s capable of gaining access to your Microsoft account, you’ll want to encrypt your hard drive with software that doesn’t upload a copy of your recovery key to the Internet, such as TrueCrypt. How to Disable Device Encryption There should be no real reason to disable device encryption. If nothing else, it’s a useful feature that will hopefully protect sensitive data in the real world where people — and even businesses — don’t enable encryption on their own. As encryption is only enabled on devices with the appropriate hardware and will be enabled by default, Microsoft has hopefully ensured that users won’t see noticeable slow-downs in performance. Encryption adds some overhead, but the overhead can hopefully be handled by dedicated hardware. If you’d like to enable a different encryption solution or just disable encryption entirely, you can control this yourself. To do so, open the PC settings app — swipe in from the right edge of the screen or press Windows Key + C, click the Settings icon, and select Change PC settings. Navigate to PC and devices -> PC info. At the bottom of the PC info pane, you’ll see a Device Encryption section. Select Turn Off if you want to disable device encryption, or select Turn On if you want to enable it — users upgrading from Windows 8 will have to enable it manually in this way. Note that Device Encryption can’t be disabled on Windows RT devices, such as Microsoft’s Surface RT and Surface 2. If you don’t see the Device Encryption section in this window, you’re likely using an older device that doesn’t meet the requirements and thus doesn’t support Device Encryption. For example, our Windows 8.1 virtual machine doesn’t offer Device Encryption configuration options. This is the new normal for Windows PCs, tablets, and devices in general. Where files on typical PCs were once ripe for easy access by thieves, Windows PCs are now encrypted by default and recovery keys are sent to Microsoft’s servers for safe keeping. This last part may be a bit creepy, but it’s easy to imagine average users forgetting their passwords — they’d be very upset if they lost all their files because they had to reset their passwords. It’s also an improvement over Windows PCs being completely unprotected by default.     

    Read the article

  • "Outlook must be online or connected to complete this action" windows XP, outlook 2007, connect to e

    - by bob franklin smith harriet
    Hey, I can't connect to an exchange server using windows XP and outlook 2007, using the "connect anywhere over HTTP" process, it has been working until recently and the user reports no recent changes to his environment. The error is "Outlook must be online or connected to complete this action" It will prompt me for the username and password which I can enter, then it will give the errorm however this only happens when I delete the account and enter all details for the excahnge server again. The client computer that is unable to connect using outlook can connect to the HTTPS mail service and login send/receive fine. Nobody else has reported issues. making a test environment with a clean install of XP and outlook 2007 gives the same error, but using windows 7 and outlook 2007 connects perfectly fine everytime. I also removed all passwords using control keymgr.dll which didnt help. Any assistance or ideas would be appreciated, at this point nothing I've tried from technet or google works <_<

    Read the article

  • How to set a management IP on a Dell powerconnect 5524/5548 switch?

    - by John Little
    When you first power on a 5524, connected via the serial console, you are offered a setup wizard where you can enter the management IP/Net/Gateway and enter the admin password. HOWEVER, if you dont do this in 60 seconds, the wizard dissapears, and there seems to be no way to run it again - even if you reboot the box. No commands work in the CLI, it just gives you this prompt: If you type say enable, or login, it gives: >login Unknown parameter May be one from the following list: debug help So no commands seem to work. The CLI reference guide does not seem to have any way to run the wizard, or to set the management port or admin passwords. So by not responding in 60 secons after boot, the unit is bricked. Any ideas?

    Read the article

  • Why do I get Access Denied when using WinRM?

    - by Kev
    Following on from this question: Why does my PowerShell script hang when called in PSEXEC via a batch (.cmd) file? I took the advice from Jim B and installed WinRM. To recap I have two servers: HMon01 - runs Windows 2003 Standard SP2 Web1928 - runs Windows 2008 Standard SP2 Both servers are standalone. I installed WinRM for Windows 2003 from here and configured WinRM as follows on both machines: Client NetworkDelayms = 5000 URLPrefix = wsman AllowUnencrypted = false Auth Basic = true Digest = true Kerberos = true Negotiate = true Certificate = true DefaultPorts HTTP = 80 HTTPS = 443 TrustedHosts = * The problem I have is that if I remotely execute commands using the remote machine's built in Administrator account then all is well. However I have an account on the remote machine named remoteexec which is a member of the Administrators group (we disable our Administrator accounts). If I use this account then I get Access Denied errors. I've done all the usual things such as checking passwords and the like. Why would this be?

    Read the article

  • Cloudera Manager CDH5 - Installation Failure on Oozie Database

    - by Nerrve
    While doing the installation, i keep getting a failure on the step "Creating Oozie database" java.lang.Exception: DB schema exists at org.apache.oozie.tools.OozieDBCLI.validateDBSchema(OozieDBCLI.java:877) at org.apache.oozie.tools.OozieDBCLI.createDB(OozieDBCLI.java:184) at org.apache.oozie.tools.OozieDBCLI.run(OozieDBCLI.java:127) at org.apache.oozie.tools.OozieDBCLI.main(OozieDBCLI.java:78) How do i fix this? Where do i get the password/username/dbname for the PostgreSQL database to drop the existing schema? I tried cat /etc/cloudera-scm-server/db*.properties | grep pass and /var/lib/cloudera-scm-server-db/data/generated-password.txt but the passwords don't work!

    Read the article

  • Windows Web Server 2008 R2 Server Core local password complexity

    - by Dennis Allen
    How can I disable the local user account password complexity settings on Windows 2008 R2 "Server Core"? I am trying to migrate our windows 2003 web server to windows 2008 R2. I am trying to see if I can use the "Server Core" install, and it has been a very internet search intensive experience. What I can't find out how to do is to find out how to disable password complexity for local user accounts. While our user account generator currently creates nice strong passwords, there was a time when this was not the case and unfortunately forcing the users to change their password is not an option at this time. Any help greatly appreciated. Dennis

    Read the article

  • Migrating users and mailboxes from postfix / Maildir to Postfix with Mysql backend

    - by Chrispy
    So I've got 60 or so users on a hand rolled postfix installation on openbsd and I'd like to move their mailboxes to our new mail server running iRedMail (postfix, vmail/mysql back end) Does anyone know of a good way to do this? Preferably a script I can run to keep syncing the users mailboxes as MX records get updated? I presume one way (though I don't have all their passwords!) would be to have a command line imap client that simulated the users copying their mail themselves but I'm sure there must be a shell / php script to migrate users? Anyone got any bright ideas? Chris.

    Read the article

  • Virus that tries to brute force attack Active Directory users (in alphabetical order)?

    - by Nate Pinchot
    Users started complaining about slow network speed so I fired up Wireshark. Did some checking and found many PCs sending packets similar to the following: (screenshot) http://imgur.com/45VlI.png I blurred out the text for the username, computer name and domain name (since it matches the internet domain name). Computers are spamming the Active Directory servers trying to brute force hack passwords. It will start with Administrator and go down the list of users in alphabetical order. Physically going to the PC finds no one anywhere near it and this behavior is spread across the network so it appears to be a virus of some sort. Scanning computers which have been caught spamming the server with Malwarebytes, Super Antispyware and BitDefender (this is the antivirus the client has) yields no results. This is an enterprise network with about 2500 PCs so doing a rebuild is not a favorable option. My next step is to contact BitDefender to see what help they can provide. Has anybody seen anything like this or have any ideas what it could possibly be?

    Read the article

  • Configure a wireless network that accepts any WPA2-PSK network key

    - by Michel
    I recently bought a UART WiFi module ( this one ) and configured it with right SSID but wrong password( and I don't know what it is ). The problem is that I can't reset this module to its manufacture settings and I can't connect to this module via serial port to configure it with some wire or cable. But I'm sure that my module is trying to connect my access point but with wrong network key ( because in logs of my access point I can see my module that trying to connect but it can't ) So, I wonder to know is there any way to create or configure a network (using some access point or something else) based on WPA2 Personal security that accepts any WPA2-PSK passwords ? Or is there any other solution for this problem ? If no, is there anyway to see what password this module using to connect to that network ? ( If yes, then I can change password of my network to that password and access to this module's admin panel ) I tried create an open network ( without any security key ) but my module just searches for WPA2 based networks ( I think ).

    Read the article

  • How do I add a self-referencing linked server in SQL 2008

    - by tigermain
    I am trying to replicate our live server set up local using a single SQL database. In SQL 2005 I would added 2 linked servers both referencing itself with different names, each point to a different table. How do I do this in SQL 2008. I've try the various providers and different parameters butto no avail. The local server is using a trusted connection so I dont need any usernames/passwords Im ideally need to set up the following linked references: DBSVR1 - mydb_master DBSVR2 - mydb_import Any light on the subject would help, I managed to do it in 2005 about 8 months ago but cant remember how, now Im in 2008!

    Read the article

  • Recover a lost IBM DS4300 SAN password?

    - by Daniel
    I have a pair of IBM DS4300 SAN units that I need to perform a firmware upgrade on. Unfortunately the admin passwords on these units have been lost and now need to be reset. I had hoped the default password of 'infiniti' would work but it seems that it must have been changed. I know the method here is to contact IBM but the cost of that phone call is ludicrous if someone out here knows what they're going to tell me to do. These units are out of warranty and the cost of support is beyond what we have the budget for. Is there an interrupt I can enter during the boot process (similar to a cisco password recovery) or is there a hardware/software tool I require? Please, if anyone has ever gone through the process of an IBM password recovery I’m asking for a little help. EDIT: Just to clarify, the password I need to reset is the one used for serial cable access and not for storage manager. Sorry if I have caused more confusion.

    Read the article

  • Samba: session setup failed: NT_STATUS_LOGON_FAILURE

    - by stivlo
    I tried to set up Samba with "unix password sync", but I still get logon failure. I am running Ubuntu Natty Narwhal. $ smbclient -L localhost Enter stivlo's password: session setup failed: NT_STATUS_LOGON_FAILURE Here is my /etc/samba/smb.conf [global] workgroup = obliquid server string = %h server (Samba, Ubuntu) dns proxy = no log file = /var/log/samba/log.%m max log size = 1000 syslog = 0 panic action = /usr/share/samba/panic-action %d security = user encrypt passwords = true passdb backend = tdbsam obey pam restrictions = yes unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes map to guest = bad user [www] path = /var/www browsable = yes read only = no create mask = 0755 After modifying I restarted the servers: $ sudo restart smbd $ sudo restart nmbd However I still can't logon with my Unix username and password. Can anyone please help? Thank you in advance!

    Read the article

  • network design to segregate public and staff

    - by barb
    My current setup has: a pfsense firewall with 4 NICs and potential for a 5th 1 48 port 3com switch, 1 24 port HP switch, willing to purchase more subnet 1) edge (Windows Server 2003 for vpn through routing and remote access) and subnet 2) LAN with one WS2003 domain controller/dns/wins etc., one WS2008 file server, one WS2003 running Vipre anti-virus and Time Limit Manager which controls client computer use, and about 50 pcs I am looking for a network design for separating clients and staff. I could do two totally isolated subnets, but I'm wondering if there is anything in between so that staff and clients could share some resources such as printers and anti-virus servers, staff could access client resources, but not vice versa. I guess what I'm asking is can you configure subnets and/or vlans like this: 1)edge for vpn 2)services available to all other internal networks 3)staff which can access services and clients 4)clients which can access services but not staff By access/non-access, I mean stronger separation than domain usernames and passwords.

    Read the article

  • Is it a bad idea to run an asp.net app pool with the same identity as IIS's anon user?

    - by Andrew Bullock
    Subject says it all really, Thinking on security terms, I want to give each site on my server its own user account, so that they can't access each other's data. I also want to use integrated authentication for sql so i dont have any passwords knocking about in connection strings. Is it a bad idea to use the same account for the app pool identity and the anon user account for iis (im interested in answers for both v6 and 7)? Edit: ive seen this post describing how IIS7 allows you to automatically use the same account, but the question of whether its a good idea or not remains ;) If so, why? Thanks

    Read the article

  • Chrome: Saved username/password filled in incognito mode

    - by Wouter Coekaerts
    If I open an incognito window in Google Chrome and go to a webpage where Chrome has a saved username and password from (for example the login form on http://gmail.com), I see that my username and password are automatically filled in. Does that mean that I am not really incognito? Can the website see my username even if I don't explicitly log in? Or is there some mechanism behind the scenes that prevents the webpage from grabbing auto-filled values unless I actually log in? Clarification: Stored usernames (and passwords) are a lot like cookies: your unique identifier linked to a certain site, stored locally in your browser, available to the site when you open it. When you go incognito you ask your browser not to identify you to the sites you visit. It does that by (among other things) not exposing its cookies. Exposing the stored username in this mode does not make sense to me (but maybe I'm missing something...).

    Read the article

  • why use ssh tunneling for mysql server?

    - by ajsie
    i've got ubuntu server acting as my lamp server for my php websites. mysql server is installed and opened for the localhost port. i have read about how to tunnel through ssh to my mysql server. but i havent understood why this is better than opening the mysql server directly for the internet port. cause in either way, a hacker could brute force the port for passwords. either mysql port (3306) if opened for the public or ssh (22) if using tunneling. so why is it better to use ssh tunneling for mysql (and many other server applications)?

    Read the article

  • Is it reasonable to have multiple SSH keys?

    - by Leonid Shevtsov
    So far I've created a separate SSH key for each server I need to login to (for each purpose, to be more accurate). I did it out of a sense of security, just like different passwords to different sites. Does having multiple SSH keys actually improve security? All of them are used from the same machine, are located in the same ~/.ssh, most even have the same passphrase. So... should I give up the whole system and just use one SSH key for everything?

    Read the article

  • How to remove password protection from compressed files

    - by Mehper C. Palavuzlar
    This has always been a problem for me for a long time. Let's see if any SuperUser can solve this: I have a directory in which there are lots of password protected .RAR files of which I know the passwords. I want to remove the password protection from all of them without extracting the contents. Since each file is larger than 1 GB, decompressing & then recompressing without password encryption is not a good option for me. How can I easily do that? I'm using WinRAR 3.80 on Win7. Any other 3rd party tools are welcomed.

    Read the article

  • Start script on network connect

    - by Nate Mara
    I am trying to get a GNU/Linux Bash script to run as soon as a network connection is established on my Raspberry Pi. I tried following the instructions on several pages: I have tried adding my script to /etc/network/if-up.d and running sudo chmod ugo+x on the file. I have tried adding the line post-up <path/to/script.sh> to /etc/network/interfaces I am really quite clueless here. More info: The script runs fine when manually run, here it is: http://pastebin.com/UJvt5HYU (I did remove my personal info (email addresses, passwords), but other than that, the script is unchanged. This script also uses the sendEmail program (can be found at http://caspian.dotconf.net/menu/Software/SendEmail/).

    Read the article

  • How do you sync tabs between computers with Mozilla Firefox Sync?

    - by 1.21 gigawatts
    Mozilla says that with Firefox Sync if you are working on one computer with 5 tabs open you can then switch to another computer or device and Sync can or will update the second computer with those tabs. How do I do this? BACKGROUND I have setup Firefox Sync on both devices and they have been synced. How do you sync them again? Is it automatically syncing them in the background? How often? How do you sync the tabs? Are the passwords synced? Documentation The documentation below describes how to add another device or computer to Sync. It says that when you add the device it syncs it. But it doesn't describe how and when it keeps it in sync or how to sync the tabs. [1] http://support.mozilla.org/en-US/kb/what-firefox-sync

    Read the article

  • Connection problem between redmine and svn

    - by WombaT
    I have server controlled by Debian 6.0. I installed and configured redmine some time ago, and now configured svn server. Now i'm trying to configure redmine to be able to view svn repository. URL is: https://192.168.11.78/svn/bee Connection is not working, log show this error: Error parsing svn output: #<REXML::ParseException: No close tag for /lists/list> Google says that its common error, and its possible to fix it by permamently accept of server certificate so i did it and nothing. Still dont work. Later, i added [global] store-plaintext-passwords = no in file .subversion/servers I did this (and cert accept) for both root and www-data users. Nothing helped, still got error in redmine The entry or revision was not found in the repository. What else i can do with it?

    Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >