Search Results

Search found 1326 results on 54 pages for 'sci fi'.

Page 34/54 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

• I just ordered 70/10 internet service, and need a new router I think?

  - by data_jepp

  Before I had 25/5 service and the N standard router did just fine. Now it doesn't do the job. Online speedtest reads at 82 so I have the line. But my laptop is getting less than 30 in my room. My laptop has the following WiFi card: http://www.intel.com/content/www/us/en/wireless-products/centrino-advanced-n-6205.html What is this talk about 2.4 and 5GHz? Can my laptop be connected at once over both bands? And would that let me use the full 70Mb over Wi-Fi?

  Read the article

• Unable to get ls to recognise LS_OPTIONS or LS_COLORS?

  - by A T

  Trying to get --color=auto as the default ls argument. $ ls --version ls (GNU coreutils) 8.21 … $ echo $LS_COLORS no=00:fi=00:di=00;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=00;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.ogg=01;35:*.mp3=01;35:*.wav=01;35: $ echo $LS_OPTIONS --color=auto Unfortunately when I run ls I still get non-colored output (running ls --color=auto manually gives me colors). How do I make --color=auto a default ls argument?

  Read the article

• Is it possible to skip .rvmrc confirmation?

  - by Viacheslav Molokov

  We are using RVM for managing Ruby installations and environments. Usually we are using this .rvmrc script: #!/bin/bash if [ ! -e '.version' ]; then VERSION=`pwd | sed 's/[a-z/-]//g'` echo $VERSION > .version rvm gemset create $VERSION fi VERSION=`cat .version` rvm use 1.9.2@$VERSION This script forces RVM to create new gem environment for each our project/version. But each time we was deploying new version RVM asks us to confirm new .rvmrc file. When we cd to this directory first time, we are getting something like: =============================================================== = NOTICE: = =============================================================== = RVM has encountered a not yet trusted .rvmrc file in the = = current working directory which may contain nasty code. = = = = Examine the contents of this file to be sure the contents = = are good before trusting it! = = = = Press 'q' to exit the reader when finished reading the file = =============================================================== (press enter to continue when ready) This is not as bad for development environments, but with auto deploy it require to manually confirm each new version on each server. Is it possible to skip this confirmation?

  Read the article

• Bash Script Exits su or ssh Session Rather than Script

  - by Russ

  I am using CentOS 5.4. I created a bash script that does some checking before running any commands. If the check fails, it will simply exit 0. The problem I am having is that on our server, the script will exit the su or ssh session when the exit 0 is called. #!/bin/bash # check if directory has contents and exit if none if [ -z "`ls /ebs_raid/import/*.txt 2>/dev/null`" ]; then echo "ok" exit 0 fi here is the output: [root@ip-10-251-86-31 ebs_raid]# . test.sh ok [russ@ip-10-251-86-31 ebs_raid]$ as you can see, I was removed from my sudo session, if I wasn't in the sudo session, it would have logged me out of my ssh session. I am not sure what I am doing wrong here or where to start.

  Read the article

• Bash delete file when variable = x

  - by twigg

  I'm creating a bash script which reboots the system at each reboot it adds a new line to a text file, I then read the text file before each reboot. Once the variable holding the number of lines reaches say 10 I want the script to delete the text file (at which point on the next reboot it will see the file isn't there, brake the loop and promote the user to start again). I tried this: exec < text.txt nol=0 while read line do nol=`expr $nol + 1` done reboot_count=10 if ["$nol" == "$reboot_count"]; then rm text.txt fi but this doesn't seem to be working, all help is appreciated :)

  Read the article

• Wired network on computer to wifi

  - by user329592

  I just got myself a wifi capable cell phone, but I dont have a wireless internet at home. I do have a wired unlimited internet connection on my computer, and I wonder whether there is any gadget that I can plug into my computer (maybe at the usb port?) with which I can turn my computer into a wifi access point? I mean, a dongle or something which will enable me to connect my phone to my computer's internet through wi-fi? Also, I dont know anything about networking, so would it be hard for me to set up a secure wifi point? Thank you for reading this question through. Hope I can buy some sort of adapter which is comparitively cheap.

  Read the article

• zip being too nice (osX)

  - by stib

  I use zip to do a regular backup of a local directory onto a remote machine. They don't believe in things like rsync here, so it's the best I can do (?). Here's the script I use echo $(date)>>~/backuplog.txt; if [[ -e /Volumes/backup/ ]]; then cd /Volumes/Non-RAID_Storage/; for file in projects/*; do nice -n 10 zip -vru9 /Volumes/backup/nonRaidStorage.backup.zip "$file" 2>&1 | grep -v "zip info: local extra (21 bytes)">>~/backuplog.txt; done; else echo "backup volume not mounted">>~/backuplog.txt; fi this all works fine, except that zip never uses much CPU, so it seems to be taking longer than it should. It never seems to get above 5%. I tried making it nice -20 but that didn't make any difference. Is it just the network or disc speeds bottlenecking the process or am I doing something wrong?

  Read the article

• windows firewall and network location switch after establishing a vpn connection

  - by Konrads

  Hello, I am looking for a reasonable solution for network location switching after VPN connection is established for Windows 7. The scenario is as follows: For location public (employee plugging in his laptop in hotel, public wi-fi,etc) all inbound connections are restricted, only outbound VPN + www is enabled. Employee then initiates a VPN connection, VPN pushes routes to 10.0.0.0/8 subnet Now I would like to have lax security rules for traffic from/to 10.0.0.0/8 that comes through the VPN interface, while still protecting the laptop from traffic that comes via uplink interface as if it was private. How to achieve this switching and duality? One option I see is switching to IPSec...

  Read the article

• Implementing dry-run in bash scripts

  - by Apikot

  How would one implement a dry-run option in a bash script? I can think of either wrapping every single command in an if and echoing out the command instead of running it if the script is running with dry-run. Another way would be to define a function and then passing each command call through that function. Something like: function _run () { if [[ "$DRY_RUN" ]]; then echo $@ else $@ fi } _run mv /tmp/file /tmp/file2 DRY_RUN=true _run mv /tmp/file /tmp/file2 Is this just wrong and there is a much better way of doing it?

  Read the article

• Implementing dry-run in bash scripts

  - by Andrei Serdeliuc

  How would one implement a dry-run option in a bash script? I can think of either wrapping every single command in an if and echoing out the command instead of running it if the script is running with dry-run. Another way would be to define a function and then passing each command call through that function. Something like: function _run () { if [[ "$DRY_RUN" ]]; then echo $@ else $@ fi } `_run mv /tmp/file /tmp/file2` `DRY_RUN=true _run mv /tmp/file /tmp/file2` Is this just wrong and there is a much better way of doing it?

  Read the article

• VIM zsh, bash and colors in command line on Ubuntu

  - by Jacek Wysocki

  I have problem with VIM command line when calling system commands. e.g. !ls, all command output colors aren't parsed by VIM. My system is Ubuntu 12.04 LTS with VIM 7.3.429 from Ubuntu repositories. Is there any workaround for this problem? EDIT: My vimrc file :!echo $TERM in VIM returns : dumb EDIT2: I found a simple workaround but it's not perfect if [ "$VIM" ] && [ "$TERM" = "dumb" ] then # For gvim's monochromatic :shell PS1='\n\u@\h \w\n\$ ' unalias ls unalias grep fi (It's working on bash)

  Read the article

• Enabling the log app on the WDTV

  - by Ariel Popovsky

  Just flashed the last WDXLTV firmware on my WDTV and it's working fine. I tried to config a Wifi USB adapter but couldn't get it to work. Dropped the log-saver.app.bin on the root of the stick but didn't find any log files after booting. What I'm doing is turning on the WDTV with the stick inserted (the stick is formatted with FAT32). Tried with the wireless-mod.app.bin required files and without any other file than the log saver. I can't get a log file anyway. All I want right now is to get the log file so I can debug the WI FI adapter.

  Read the article

• Bash preexecute

  - by Alex_Bender

  I'm trying to write bash command wrapper, which will be patch bash current command on the fly. But i'm faced with the problem. As i'm not a good Shell user, i can't write right expression of variable assignment in string. See bellow: I'm set trap to preexecute, through this: alex@bender:~$ trap "caller >/dev/null || xxx \"\${BASH_COMMAND}"\" DEBUG; I want change variable BASH_COMMAND, do something like BASH_COMMAND=xxx ${BASH_COMMAND} but i don't know, how i need escaping variables in this string NOTE: xxx -- my custom function, which must return some value, if in end of command situated word teststr function xxx(){ # find by grep, if teststr in the end `echo "$1" | grep "teststr$" >/dev/null`; # if true ==> do if [ "$?" == "0" ]; then # cut last 6 chars (len('teststr')==6) var=`echo "$1" | sed 's/......$//'`; echo "$var"; fi } How can i do this stuff?: alex@bender:~$ trap "caller >/dev/null || ${BASH_COMMAND}=`xxx $BASH_COMMAND`" DEBUG;

  Read the article

• help with bash script using find and diff command

  - by su

  Helloe, i have a bash script that i need help with: #!/bin/bash if [ -f "/suid.old" ] then find / -perm -4000 -o -perm -2000 ls > suid.old else find / -perm 4000 -o -perm -2000 ls > suid.new diff suid.old suid.new > newchanges.list fi when i run it it gives me an error saying: diff: suid.old: No such file or directory. My script should say, if suid.old does not exist, then use the find command to create one, or else use find command to do whatever it needs to with the suid.new. after find any changes it made and redirect it to newchanges.list please help,

  Read the article

• Why are my USB 2.0 devices hanging Windows XP?

  - by BenAlabaster

  Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a DFI CM33-TL/G ATX (identified using SiSoft Sandra) motherboard hosting an Intel Celeron 1.3GHz CPU, 768Mb PC133 SDRAM, a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board based on the NEC uPD720102 chipset containing 3 external and 1 internal USB sockets. It's also hosting a 1.44Mb floppy drive on FDD0, a new 80Gb Western Digital hard drive running as master on IDE0 and a Panasonic DVD+/-RW running as master on IDE1. All this is sitting in a slimline case running off a Macron Power MPT-135 135W Flex power supply. The motherboard is running a version of Award BIOS 05/24/2002-601T-686B-6A6LID4AC-00. Could this be updated? If so, from where? I've raked through the manufacturer's website but can't find any hint of downloads for either drivers or BIOS updates. The hard disk is freshly formatted and built with Windows XP Professional/Service Pack 3 and is up to date with all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 hangs the whole machine as soon as it starts up, requiring a hard boot to recover). It's got a Daytek MV150 15" touch screen hooked up to the on board VGA and COM1 sockets with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem: If I hook any devices to the USB 2.0 sockets, it hangs the whole machine and I have to hard boot it to get it back up. If I have any devices attached to the USB 2.0 sockets when I boot up, it hangs before Windows gets to the login prompt and I have to hard boot it to recover. Workarounds found: I can plug the same devices into the on board USB 1.0 sockets and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions: I've seen suggestions that this could be a power problem - that the PSU just doesn't have the wattage to drive these ports. While I'm doubtful this is the problem [after all the motherboard has the same standard connector regardless of the PSU wattage], I tried disabling all the on board devices that I'm not using - on board LAN, the second COM port, the AGP connector etc. through the BIOS in what I'm sure is a futile attempt to reduce the power consumption... I also modified the ACPI and power management settings. It didn't have any noticeable affect, although it didn't do any harm either. Could the wattage of the PSU really cause this problem? If it can, is there anything I need to be aware of when replacing it or do I just need to make sure it's got a higher wattage than the current one? My interpretation was that the wattage only affected the number of drives you could hook up to the power connectors, is that right? I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself, and Windows says the card is installed and working correctly... right up until I connect a device to it. The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference - does anyone have any experience that would suggest this might work? Other thoughts/questions: Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question: Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine?

  Read the article

• Install VLC 2.0.7 in CentOS 6.4?

  - by raaz

  I am keep failing in the installation process I have tried. I have started process as follows. yum install gcc dbus-glib-devel* lua-devel* libcddb wget http://download.videolan.org/pub/videolan/vlc/2.0.7/vlc-2.0.7.tar.xz tar -xf vlc-2.0.7.tar.xz && cd vlc-2.0.7 ./configure in the configure I am getting the error as follows configure: WARNING: No package 'libcddb' found: CDDB access disabled. checking for Linux DVB version 5... yes checking for DVBPSI... no checking gme/gme.h usability... no checking gme/gme.h presence... no checking for gme/gme.h... no checking for SID... no configure: WARNING: No package 'libsidplay2' found (required for sid). checking for OGG... no configure: WARNING: Library ogg >= 1.0 needed for ogg was not found checking for MUX_OGG... no configure: WARNING: Library ogg >= 1.0 needed for mux_ogg was not found checking for SHOUT... no configure: WARNING: Library shout >= 2.1 needed for shout was not found checking ebml/EbmlVersion.h usability... no checking ebml/EbmlVersion.h presence... no checking for ebml/EbmlVersion.h... no checking for LIBMODPLUG... no configure: WARNING: No package 'libmodplug' found No package 'libmodplug' found. checking mpc/mpcdec.h usability... no checking mpc/mpcdec.h presence... no checking for mpc/mpcdec.h... no checking mpcdec/mpcdec.h usability... no checking mpcdec/mpcdec.h presence... no checking for mpcdec/mpcdec.h... no checking for libcrystalhd/libcrystalhd_if.h... no checking mad.h usability... no checking mad.h presence... no checking for mad.h... no configure: error: Could not find libmad on your system: you may get it from http://www.underbit.com/products/mad/. Alternatively you can use --disable-mad to disable the mad plugin. [root@localhost vlc-2.0.7]# So I went to libmad http location and downloaded it and while doing make it gave me the errors.There are no errors at ./configure with libmad but make not going through. [root@localhost libmad-0.15.0b]# make (sed -e '1s|.*|/*|' -e '1b' -e '$s|.*| */|' -e '$b' \ -e 's/^.*/ *&/' ./COPYRIGHT; echo; \ echo "# ifdef __cplusplus"; \ echo 'extern "C" {'; \ echo "# endif"; echo; \ if [ ".-DFPM_INTEL" != "." ]; then \ echo ".-DFPM_INTEL" | sed -e 's|^\.-D|# define |'; echo; \ fi; \ sed -ne 's/^# *define *\(HAVE_.*_ASM\).*/# define \1/p' \ config.h; echo; \ sed -ne 's/^# *define *OPT_\(SPEED\|ACCURACY\).*/# define OPT_\1/p' \ config.h; echo; \ sed -ne 's/^# *define *\(SIZEOF_.*\)/# define \1/p' \ config.h; echo; \ for header in version.h fixed.h bit.h timer.h stream.h frame.h synth.h decoder.h; do \ echo; \ sed -n -f ./mad.h.sed ./$header; \ done; echo; \ echo "# ifdef __cplusplus"; \ echo '}'; \ echo "# endif") >mad.h make all-recursive make[1]: Entering directory `/home/raja/Downloads/libmad-0.15.0b' make[2]: Entering directory `/home/raja/Downloads/libmad-0.15.0b' if /bin/sh ./libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_INTEL -DASO_ZEROCHECK -Wall -march=i486 -g -O -fforce-mem -fforce-addr -fthread-jumps -fcse-follow-jumps -fcse-skip-blocks -fexpensive-optimizations -fregmove -fschedule-insns2 -fstrength-reduce -MT version.lo -MD -MP -MF ".deps/version.Tpo" \ -c -o version.lo `test -f 'version.c' || echo './'`version.c; \ then mv -f ".deps/version.Tpo" ".deps/version.Plo"; \ else rm -f ".deps/version.Tpo"; exit 1; \ fi mkdir .libs gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_INTEL -DASO_ZEROCHECK -Wall -march=i486 -g -O -fforce-mem -fforce-addr -fthread-jumps -fcse-follow-jumps -fcse-skip-blocks -fexpensive-optimizations -fregmove -fschedule-insns2 -fstrength-reduce -MT version.lo -MD -MP -MF .deps/version.Tpo -c version.c -fPIC -DPIC -o .libs/version.lo cc1: error: unrecognized command line option "-fforce-mem" make[2]: *** [version.lo] Error 1 make[2]: Leaving directory `/home/raja/Downloads/libmad-0.15.0b' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/raja/Downloads/libmad-0.15.0b' make: *** [all] Error 2 how can i resolve the issue and install VLC in my Centos ? I am using CentOS 6.4 . Thank you.

  Read the article

• VirtualBox - Mac OSX host Win7 guest - no Internet access for guest VM

  - by nodelayheehoo

  I have a Mac running OSX 10.9.2, and I just downloaded and installed a Win7 IE9 VM in VirtualBox. My Mac uses Wi-Fi for internet access, and it's behind a proxy (it's a work machine). VirtualBox loads the VM fine, and at some point the VM can see the DNS servers of the host. But I've never been able to make the VM have internet access. I've tried all kinds of combinations of Network settings on the VM via the VirtualBox Settings, in conjunction with Internet Sharing in OSX's System Preferences, but no luck. Has anyone done a similar setup and made the VM successfully connect to the Internet? Thanks in advance for any inputs. [ Update: I was able to get internet access for the VM when the host was using my home network. When I ran the VPN software to connect to the work network, the internet access went away again.] (Initially posted this on stackoverflow.com, but it was put on hold as off-topic by several users, and was advised to ask here instead)

  Read the article

• BASH function not escaping control characters

  - by ehime

  Hey guys I have a function that I'm using to find stuff, but unfortunately anytime I pass it a control character ($intVal or testing : etc) it chokes. I was wondering what the fix was? I can understand that using $ or % or : etc in grep without escaping causes this issue, but since I'm passing it in by reference I'm not sure how to escape it... Anyway, here's the code. function ffind() { if [ $1 ] ; then find -type f | grep -ir '$1' * | grep -v '.svn' else echo "'$1' is not a valid resource" fi } Example(s): $ ffind $intVal '' is not a valid resource $ ffind "testing :" bash: [: testing: unary operator expected 'testing :' is not a valid resource

  Read the article

• What equipment do real ISP's use?

  - by Allanrbo

  In a dormitory of 550 residents, people often mistakenly set up DHCP servers for the whole network by plugging in their private Wi-Fi routers wrongly. Also recently, someone mistakenly configured their PC to a static IP being the same as that of the default gateway. We use cheap 3Com switches at the moment. I know that Cisco switches support DHCP snooping to solve the DHCP problem, but that still does not solve the default gateway IP takeover problem. What sort of switch equipment do real ISP's use so their customers cannot break the network for the other customers?

  Read the article

• Battery in Macbook Pro 15" i5

  - by Graniti

  Hi I just purchased a new Macbook Pro (2,4GHz i5 320Gb) but the battery lasts about 5h and I was not doing anything more than browsing with WI-FI and editing text files. In the specification says that it should last 8-9 h. Does anybody have any idea if I could return the laptop with the reason that I am not satisfied? Is it enough? Anybody had any similar experience? I do not know if it matters but I bought it from a Apple Premium Reseller shop. Thanx, Granit

  Read the article

• zip being too nice (Mac OS X)

  - by stib

  I use zip to do a regular backup of a local directory onto a remote machine. They don't believe in things like rsync here, so it's the best I can do (?). Here's the script I use echo $(date)>>~/backuplog.txt; if [[ -e /Volumes/backup/ ]]; then cd /Volumes/Non-RAID_Storage/; for file in projects/*; do nice -n 10 zip -vru9 /Volumes/backup/nonRaidStorage.backup.zip "$file" 2>&1 | grep -v "zip info: local extra (21 bytes)">>~/backuplog.txt; done; else echo "backup volume not mounted">>~/backuplog.txt; fi This all works fine, except that zip never uses much CPU, so it seems to be taking longer than it should. It never seems to get above 5%. I tried making it nice -20 but that didn't make any difference. Is it just the network or disc speeds bottlenecking the process or am I doing something wrong?

  Read the article

• Not working WEP key in Ubuntu

  - by stupid-idiot

  This time I've got some problem with connection to the internet from my old laptop with ubuntu, I already had some problems with setting up the radio on my network card but I think it works now since it finds some wireless networks. The problem is that I can't connect to my router via wi-fi even if I'm hundred-percently sure the wepkey I punch there is correct, it works via LAN though. Also, I'm not able to ping myself with 127.0.0.1. I'm sorry to say it but I don't think I can stand this shitness for much longer. Although it's much much faster than Windows it's useless since i can't download any libraries for development. If anyone has any experience with this, even indirect, please leave your answer or comment thx

  Read the article

• VPN and Bonjour conflicting

  - by JW.

  Does anyone know why a VPN connection might interfere with Apple's Bonjour? I've noticed that my Mac and various iDevices have trouble finding each other on my local network, when I have VPN connections open. Things like Home Sharing and Wi-Fi Sync work some of the time, but sometimes fail to find the other device. The VPN connections are made using IPSecuritas, which is a GUI around raccoon. I have the local "endpoint mode" set to Host. Apple mentions that Home Sharing may conflict with VPNs, but they don't specify why, or how to fix it. I'm using a Mac with OS 10.7.3 and IPSecuritas to connect to the VPN, an iPhone, and an iPad.

  Read the article

• How can I allow a linux subversion user to only execute svnserve?

  - by sbleon

  I've got a user that I'd like to only be able to use subversion. We like to use svn+ssh:// URLs sometimes (for public keys and whatnot), so I need them to be able to connect over ssh and run only the svnserve command. When using a svn+ssh URL, svn ssh'es in and passes the arguments "-c svnserve -t". I wrote a custom shell as follows to filter the commands that can be run. This works, but it's not passing the input to svnserve, so when I try to "svn up" I get "svn: Connection closed unexpectedly". #!/bin/bash if [ "$1" == "-c" ] && [ "$2" == "svnserve" ] && [ "$3" == "-t" ] && [ "$4" == ""] ; then exec svnserve -t else echo "Access denied. User may only run svnserve." fi

  Read the article

• Is there a way to change the default sound volume on startup in windows?

  - by Logan Dam

  I've got a Creative X-Fi Titanium running on Windows 8, which works great, but the drivers have this weird quirk where it sets my headphones volume at 30% every time I boot if I have fast boot enabled. If I disable fast boot then it remembers my previous volume but I don't want to disable fast boot any more (I have an SSD, I want to use it :P) I've asked a similar question here before but as you can see the only "solution" was to disable fast boot, which I don't want to do anymore. Is there a command line tool that will let me set my volume or something similar that I can chuck in a batch file and run on startup, or anything else similar?

  Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >