Search Results

Search found 61322 results on 2453 pages for 'time conversion'.

Page 34/2453 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

  • Inconsistency between date-time in terminal and clock

    - by Franck
    I can't figure out why I have 5 hours difference between GUI clock and date command in terminal. My bios clock is set to GMT... Any ideas ? franck@franck-ThinkPad-T61:~$ date mercredi 11 avril 2012, 02:48:47 (UTC-0500) franck@franck-ThinkPad-T61:~$ sudo dpkg-reconfigure tzdata Current default time zone: 'Europe/Paris' Local time is now: Wed Apr 11 09:49:02 CEST 2012. Universal Time is now: Wed Apr 11 07:49:02 UTC 2012. franck@franck-ThinkPad-T61:~$ tail /etc/timezone Europe/Paris franck@franck-ThinkPad-T61:~$ date mercredi 11 avril 2012, 02:49:21 (UTC-0500) franck@franck-ThinkPad-T61:~$ sudo dpkg-reconfigure --frontend noninteractive tzdata Current default time zone: 'Europe/Paris' Local time is now: Wed Apr 11 09:49:27 CEST 2012. Universal Time is now: Wed Apr 11 07:49:27 UTC 2012. franck@franck-ThinkPad-T61:~$ date mercredi 11 avril 2012, 02:49:30 (UTC-0500) franck@franck-ThinkPad-T61:~$ sudo cat /etc/default/rcS # # /etc/default/rcS # # Default settings for the scripts in /etc/rcS.d/ # # For information about these variables see the rcS(5) manual page. # # This file belongs to the "initscripts" package. TMPTIME=0 SULOGIN=no DELAYLOGIN=no UTC=yes VERBOSE=no FSCKFIX=no franck@franck-ThinkPad-T61:~$ sudo hwclock --show mer. 11 avril 2012 07:49:48 CDT -0.555705 secondes

    Read the article

  • Using the Java SE 8 Date Time API with JPA 2.1

    - by reza_rahman
    Most of you are hopefully aware of the new Date Time API included in Java SE 8. If you are not, you should check them out right now using the Java Tutorial Trail dedicated to the topic. It is a significantly leap forward in processing temporal data in Java. For those who already use Joda-Time the changes will look very familiar - very simplistically speaking the Java SE 8 feature is basically Joda-Time standardized. Quite naturally you will likely want to use the new Date Time APIs in your JPA domain model to better represent temporal data. The problem is that JPA 2.1 will not support the new API out of the box. So what are you to do? Fortunately you can make use of fairly simple JPA 2.1 Type Converters to use the Date Time API in your JPA domain classes. Steven Gertiser shows you how to do it in an extremely well written blog entry. Besides explaining the problem and the solution the entry is actually very good for getting a better understanding of JPA 2.1 Type Converters as well. I think such a set of converters may be a good fit for Apache DeltaSpike as a Java EE 7 extension? In case you are wondering about Java SE 8 support in the JPA specification itself, Nick Williams has already entered an excellent, well researched JIRA entry asking for such support in a future version of the JPA specification that's well worth looking at. Another possibility of course is for JPA providers to start supporting the Date Time API natively before anything is formalized in the specification. What do you think?

    Read the article

  • MPEG-2 playback inconsistent

    - by DustByte
    Many years ago I gave up on Linux because video playback was choppy. Now I'm back, and video playback is still playing up... I have two MPEG files: good.mpg bad.mpg. Here is some information about the two files, using avprobe: My machine is Intel Core 2 Duo E8400 @ 3.00GHz x 2, 64-bit. I do not know what graphics card I have. I run Ubuntu 12.04. So far I have had no problems with YouTube and playback of various video files, including playback of the file good.mpg, included in the avprobe snapshot above. However, the file bad.mpg gives me headache! The file bad.mpg is produced by a respectable "Old-video-tapes-to-DVD" company. I converted over 10 Video-8 tapes to MPEG through them, and today I collected my hard drive containing the MPEG files. Unfortunately I have problem watching them! Here are some details: Using Totem Movie Player 3.0.1 works well for several seconds, then it gets choppy and the playback is not at all smooth. Also the player easily freezes for a while when trying to jump to another position in the file. Most strangely though, the total time is shown as 0:42 (42 seconds) instead of the true 00:39:11: The VLC media player is doing a better job. It shows the correct total length, but as soon as I jump in the video to a new position, it stalls. Playback also stalls after 30 seconds if I press play and leave it. Using Handbrake and choosing bad.mpg as the source, gives me: There is only one title to choose, and it is 6 min 53 seconds. I would have guessed the full 39 minutes of the video should have shown. Lastly, putting the file bad.mpg in Dropbox and viewing it on my iPad with the Dropbox app seems fine (disregard the lack of easy jumping forward due to real-time encoding when streaming it). My question is simple: What is going on?! Why do I have problem to play the MPEG-2 files I just paid good money for (the issue with bad.mpg applies to all files I had encoded)? Is it an issue with my particular Linux machine? The graphics card? But why has everything worked fine so far, and why does not the good.mpg file cause any problems?

    Read the article

  • 2D Animation Smoothness - Delta time vs. Kinematics

    - by viperld002
    I'm animating a sprite in 2D with key frames of rotation and xy-positions. I've recently had a discussion with someone saying that when the device (happens to be an iPad using cocos2D) hits a performance bump due to whatever else the user may be doing, lag will arise and that the best way to fight it is to not use actual positions, but velocities, accelerations and torques with kinematics. His message is to evaluate the positions and rotations from these speeds at the current point in time. I've never experienced a situation where I've heard of using kinematics to stem lag in 2D animations and am not sure of how effective it could be. Also, it seems to be overkill. The application is not networked so it's all running on a local device. The desired effect is that the animation always plays as closely as it can to the target frame rate. Wouldn't the technique suffer the same problems as just using the time since the last frame or a fixed time step since the kinematics would also require some time value to perform the calculation? What techniques could you suggest to best achieve the desired effect? EDIT 1 Thank you for your responses, they are very illuminating. I want to clarify my question before choosing an answer however, to make sure that this post really serves it's purpose. I have a sprite of a ball, and a text file with 3 arrays worth of information (rotation,translations x, translations y) with each unit of information existing as a key frame to be stepped through (0 to 49 and back to 0 to replay it again). I have this playing by interpolating from the current key frame to the next, every n-units of time. The animation is visibly correct when compared to a video I was given of it, and it is smooth because of the interpolations between the key frames. This is the existing state of the project. There are no physics simulated, only a static animation of a ball moving in a way an artist specifically designed. Should I, instead of rotation in degrees and translations by positions in space, derive velocities, accelerations and torques to express this static animation as a function of time? As in, position now = foo(time now), where foo uses kinematics.

    Read the article

  • How to change the date/time in Python for all modules?

    - by Felix Schwarz
    When I write with business logic, my code often depends on the current time. For example the algorithm which looks at each unfinished order and checks if an invoice should be sent (which depends on the no of days since the job was ended). In these cases creating an invoice is not triggered by an explicit user action but by a background job. Now this creates a problem for me when it comes to testing: I can test invoice creation itself easily However it is hard to create an order in a test and check that the background job identifies the correct orders at the correct time. So far I found two solutions: In the test setup, calculate the job dates relative to the current date. Downside: The code becomes quite complicated as there are no explicit dates written anymore. Sometimes the business logic is pretty complex for edge cases so it becomes hard to debug due to all these relative dates. I have my own date/time accessor functions which I use throughout my code. In the test I just set a current date and all modules get this date. So I can simulate an order creation in February and check that the invoice is created in April easily. Downside: 3rd party modules do not use this mechanism so it's really hard to integrate+test these. The second approach was way more successful to me after all. Therefore I'm looking for a way to set the time Python's datetime+time modules return. Setting the date is usually enough, I don't need to set the current hour or second (even though this would be nice). Is there such a utility? Is there an (internal) Python API that I can use?

    Read the article

  • How can you set a time limit for a PowerShell script to run for?

    - by calrain
    I want to set a time limit on a PowerShell (v2) script so it forcibly exits after that time limit has expired. I see in PHP they have commands like set_time_limit and max_execution_time where you can limit how long the script and even a function can execute for. With my script, a do/while loop that is looking at the time isn't appropriate as I am calling an external code library that can just hang for a long time. I want to limit a block of code and only allow it to run for x seconds, after which I will terminate that code block and return a response to the user that the script timed out. I have looked at background jobs but they operate in a different thread so won't have kill rights over the parent thread. Has anyone dealt with this or have a solution? Thanks!

    Read the article

  • Series On Embedded Development (Part 2) - Build-Time Optionality

    - by user12612705
    In this entry on embedded development, I'm going to discuss build-time optionality (BTO). BTO is the ability to subset your software at build-time so you only use what is needed. BTO typically pertains more to software providers rather then developers of final products. For example, software providers ship source products, frameworks or platforms which are used by developers to build other products. If you provide a source product, you probably don't have to do anything to support BTO as the developers using your source will only use the source they need to build their product. If you provide a framework, then there are some things you can do to support BTO. Say you provide a Java framework which supports audio and video. If you provide this framework in a single JAR, then developers who only want audio are forced to ship their product with the video portion of your framework even though they aren't using it. In this case, support providing the framework in separate JARs...break the framework into an audio JAR and a video JAR and let the users of your framework decide which JARs to include in their product. Sometimes this is as simple as packaging, but if, for example, the video functionality is dependent on the audio functionality, it may require coding work to cleanly separate the two. BTO can also work at install-time, and this is sometimes overlooked. Let's say your building a phone application which can use Near Field Communications (NFC) if it's available on the phone, but it doesn't require NFC to work. Typically you'd write one app for all phones (saving you time)...both those that have NFC and those that don't, and just use NFC if it's there. However, for better efficiency, you can detect at install-time if the phone supports NFC and not install the NFC portion of your app if the phone doesn't support NFC. This requires that you write the app so it can run without the optional NFC code and that you write your install app so it can detect NFC and do the right thing at install-time. Supporting install-time optionality will save persistent footprint on the phone, something your customers will appreciate, your app "neighbors" will appreciate, and that you'll appreciate when they save static footprint for you. In the next article, I'll talk about runtime optionality.

    Read the article

  • How do I build (get/download) time.h library?

    - by coffeenet
    I am trying to build a project on Linux via Makefile. I keep getting cannot find <sys/time.h> error. I asked around, and I was told that my project doesn't have access to library folders. Therefore, I am trying to solve this problem by using the time library locally inside my project's folder. I am very new to Linux. So, please forgive my question if it sounds naive. I found this, but I don't know what files I need, and how to build the library. http://sourceware.org/git/?p=glibc.git;a=tree;f=time;h=c950c5d4dd90541e8f3c7e1649fcde4aead989bb;hb=master Where can I find the time.h library/package? How do I build the library?

    Read the article

  • Getting current time in milliseconds

    - by user90293423
    How to get the current time in milliseconds? I'm working on a hacking simulation game and when ever someone connects to another computer/NPC, a login screen popups with a button on the side called BruteForce. When BruteForce is clicked, what i want the program to do is, calculate how many seconds cracking the password is going to take based on the player's CPU speed but that's the easy part. The hard part is i want to enter a character in the password's box every X milliseconds based on a TimeToCrack divided by PasswordLength formula. But since i don't know how to find how many milliseconds have elapsed since the second has passed, the program waits until the CurrentTime is higher than the TimeBeforeTheLoopStarted + HowLongItTakesToTypeaCharacter which is always going to be a second. How would you handle my problems? I've commented the game breaking part. std::vector<QString> hardware = user.getHardware(); QString CPU = hardware[0]; unsigned short Speed = 0; if(CPU == "OMG SingleCore 1.8GHZ"){ Speed = 2; } const short passwordLength = password.length(); /* It's equal to 16 */ int Time = passwordLength / Speed; double TypeSpeed = Time / passwordLength; time_t t = time(0); struct tm * now = localtime(&t); unsigned short EndTime = (now->tm_sec + Time) % 60; unsigned short CurrentTime = 0; short i = passwordLength - 1; do{ t = time(0); now = localtime(&t); CurrentTime = now->tm_sec; do{ t = time(0); now = localtime(&t); }while(now->tm_sec < CurrentTime + TypeSpeed); /* Highly flawed */ /* Do this while your integer value is under this double value */ QString tempPass = password; tempPass.chop(i); ui->lineEdit_2->setText(tempPass); i--; }while(CurrentTime != EndTime);

    Read the article

  • Moving windows-2003 hdd into virtual machine - with HDD shrink

    - by jm666
    Before you vote to close as exact duplicate, please read the full question. I was already read: Can I make a virtual machine out of a Windows XP physical machine? Disk2vhd,convert my PC to Hyper-V Virtual Machine Creating a Windows Virtual PC image from a Physical machine physical machine to virtual machine and place into VirtualBox BSOD trying to migrate Windows XP from a physical to a virtual machine http://en.wikipedia.org/wiki/Physical-to-Virtual and all other similiar questions here and several external sites too Unfortunately, don't find answer for my problem. I have an physical machine with 500GB HDD, on what is installed old Windows-2003 server with one server application. The application is like the windows itself, too old, no support for it today, haven't installation media and so on.. ;( On the HDD it is used only approx. 100MB (maybe less when will delete all unnecessary files). Want convert the the machine into the VirtualBox, and the VirtualBox should run on the same machine. Is possible to do this with the next steps? I can attach another HDD (via USB or internally) Boot an live Linux from CD, mount HDDs Run "something" on the Linux (the above wikipedia article have many pointer for the SW) for the conversion and store the image on the USB HDD - unfortunately, many of tools uses some specialty what exists in Windows-XP and above. No informations about Windows-2003 server, so what is an working solution for Windows-2003? try boot the virtual image with VirtualBox when it will run ok, remove the old installation, install Linux on the old 500GB hdd, copy the image and run.. The above should works (i hope), but the problems: i currently have only 320GB external USB hdd. (ofc, i can remove it from a box and enter it as internal HDD too) so, for the conversion I looking for the on the fly HDD shrink, so while moving the physical 500GB HDD need shrink it into smaller HDD - as i told above, only 100MB is used Exists something for this? (free) - or the only way is buying and larger 1TB hdd and using it for the conversion? Another question are: is anybody have real experience with windows-2003 conversion into VirtualBox? Looking for an answer from someone who really doing it and can figure out real pitfalls. (googling can do myself). exists here better approach for the solution?

    Read the article

  • How to convert djvu file to pdf or other more common file format?

    - by Zeta2
    I have downloaded file which is in djvu format. I want to convert it to pdf or some other more common format, so I can read the document from other devices (e.g. my phone etc). I found a conversion utility at Lizardtech, but when I converted the doc using the lizardtech software, every page had a watermark - which rendered the converted doc virtually useless. Does anyone know where I can get a free conversion utility that does not watermark the converted doc?

    Read the article

  • Most efficient way to implement delta time

    - by Starkers
    Here's one way to implement delta time: /// init /// var duration = 5000, currentTime = Date.now(); // and create cube, scene, camera ect ////// function animate() { /// determine delta /// var now = Date.now(), deltat = now - currentTime, currentTime = now, scalar = deltat / duration, angle = (Math.PI * 2) * scalar; ////// /// animate /// cube.rotation.y += angle; ////// /// update /// requestAnimationFrame(render); ////// } Could someone confirm I know how it works? Here what I think is going on: Firstly, we set duration at 5000, which how long the loop will take to complete in an ideal world. With a computer that is slow/busy, let's say the animation loop takes twice as long as it should, so 10000: When this happens, the scalar is set to 2.0: scalar = deltat / duration scalar = 10000 / 5000 scalar = 2.0 We now times all animation by twice as much: angle = (Math.PI * 2) * scalar; angle = (Math.PI * 2) * 2.0; angle = (Math.PI * 4) // which is 2 rotations When we do this, the cube rotation will appear to 'jump', but this is good because the animation remains real-time. With a computer that is going too quickly, let's say the animation loop takes half as long as it should, so 2500: When this happens, the scalar is set to 0.5: scalar = deltat / duration scalar = 2500 / 5000 scalar = 0.5 We now times all animation by a half: angle = (Math.PI * 2) * scalar; angle = (Math.PI * 2) * 0.5; angle = (Math.PI * 1) // which is half a rotation When we do this, the cube won't jump at all, and the animation remains real time, and doesn't speed up. However, would I be right in thinking this doesn't alter how hard the computer is working? I mean it still goes through the loop as fast as it can, and it still has render the whole scene, just with different smaller angles! So this a bad way to implement delta time, right? Now let's pretend the computer is taking exactly as long as it should, so 5000: When this happens, the scalar is set to 1.0: angle = (Math.PI * 2) * scalar; angle = (Math.PI * 2) * 1; angle = (Math.PI * 2) // which is 1 rotation When we do this, everything is timsed by 1, so nothing is changed. We'd get the same result if we weren't using delta time at all! My questions are as follows Mostly importantly, have I got the right end of the stick here? How do we know to set the duration to 5000 ? Or can it be any number? I'm a bit vague about the "computer going too quickly". Is there a way loop less often rather than reduce the animation steps? Seems like a better idea. Using this method, do all of our animations need to be timesed by the scalar? Do we have to hunt down every last one and times it? Is this the best way to implement delta time? I think not, due to the fact the computer can go nuts and all we do is divide each animation step and because we need to hunt down every step and times it by the scalar. Not a very nice DSL, as it were. So what is the best way to implement delta time? Below is one way that I do not really get but may be a better way to implement delta time. Could someone explain please? // Globals INV_MAX_FPS = 1 / 60; frameDelta = 0; clock = new THREE.Clock(); // In the animation loop (the requestAnimationFrame callback)… frameDelta += clock.getDelta(); // API: "Get the seconds passed since the last call to this method." while (frameDelta >= INV_MAX_FPS) { update(INV_MAX_FPS); // calculate physics frameDelta -= INV_MAX_FPS; } How I think this works: Firstly we set INV_MAX_FPS to 0.01666666666 How we will use this number number does not jump out at me. We then intialize a frameDelta which stores how long the last loop took to run. Come the first loop frameDelta is not greater than INV_MAX_FPS so the loop is not run (0 = 0.01666666666). So nothing happens. Now I really don't know what would cause this to happen, but let's pretend that the loop we just went through took 2 seconds to complete: We set frameDelta to 2: frameDelta += clock.getDelta(); frameDelta += 2.00 Now we run an animation thanks to update(0.01666666666). Again what is relevance of 0.01666666666?? And then we take away 0.01666666666 from the frameDelta: frameDelta -= INV_MAX_FPS; frameDelta = frameDelta - INV_MAX_FPS; frameDelta = 2 - 0.01666666666 frameDelta = 1.98333333334 So let's go into the second loop. Let's say it took 2(? Why not 2? Or 12? I am a bit confused): frameDelta += clock.getDelta(); frameDelta = frameDelta + clock.getDelta(); frameDelta = 1.98333333334 + 2 frameDelta = 3.98333333334 This time we enter the while loop because 3.98333333334 = 0.01666666666 We run update We take away 0.01666666666 from frameDelta again: frameDelta -= INV_MAX_FPS; frameDelta = frameDelta - INV_MAX_FPS; frameDelta = 3.98333333334 - 0.01666666666 frameDelta = 3.96666666668 Now let's pretend the loop is super quick and runs in just 0.1 seconds and continues to do this. (Because the computer isn't busy any more). Basically, the update function will be run, and every loop we take away 0.01666666666 from the frameDelta untill the frameDelta is less than 0.01666666666. And then nothing happens until the computer runs slowly again? Could someone shed some light please? Does the update() update the scalar or something like that and we still have to times everything by the scalar like in the first example?

    Read the article

  • Design pattern for an automated mechanical test bench

    - by JJS
    Background I have a test fixture with a number of communication/data acquisition devices on it that is used as an end of line test for a product. Because of all the various sensors used in the bench and the need to run the test procedure in near real-time, I'm having a hard time structuring the program to be more friendly to modify later on. For example, a National Instruments USB data acquisition device is used to control an analog output (load) and monitor an analog input (current), a digital scale with a serial data interface measures position, an air pressure gauge with a different serial data interface, and the product is interfaced through a proprietary DLL that handles its own serial communication. The hard part The "real-time" aspect of the program is my biggest tripping point. For example, I need to time how long the product needs to go from position 0 to position 10,000 to the tenth of a second. While it's traveling, I need to ramp up an output of the NI DAQ when it reaches position 6,000 and ramp it down when it reaches position 8,000. This sort of control looks easy from browsing NI's LabVIEW docs but I'm stuck with C# for now. All external communication is done by polling which makes for lots of annoying loops. I've slapped together a loose Producer Consumer model where the Producer thread loops through reading the sensors and sets the outputs. The Consumer thread executes functions containing timed loops that poll the Producer for current data and execute movement commands as required. The UI thread polls both threads for updating some gauges indicating current test progress. Unsure where to start Is there a more appropriate pattern for this type of application? Are there any good resources for writing control loops in software (non-LabVIEW) that interface with external sensors and whatnot?

    Read the article

  • Make the Time

    - by WonderOfItAll
    Took the little one to the pool tonight for swim lessons. Okay, Okay. They're not really lessons so much as they are "Hey, here's a few bucks, let me rent out a small section of your pool to swim around with my little one" Saw a dad at the pool. Bluetooth on, iPad in hand, and two year old somewhere around there. Saw a mom at the pool. Arguing with her five year old to NOT take a shower after swimming. Bluetooth on, iPad in hand, work laptop open on stadium seats. Her reasoning for not wanting the child to shower "Look, I have to get this stuff to the office by 6:30, we don't have time for you to shower. Let's go" Wait, isn't the whole point of this little experience called Mommy and Me (or, as in my case, Daddy and Me). Wherein Mommy/Daddy is supposed to spend time with little one. Not with the Bluetooth. Not with the work laptop. Dad (yeah, the same dad from earlier), in the pool. Bluetooth off (it's not waterproof or I'm sure he would've had it on), two year old in hand and iPad somewhere put away. Getting frustrated with kid because he won't 'perform' on command. Here's a little exchange Kid: "I don't wanna get in the water" Dad: "Well, we're here for 30 minutes, get in the water" Kid: "No, don't wanna" Dad: "Fine, I'm getting in" and, true to his word, in he goes, off to swim. Kid: Crying Dad: "Well, c'mon" Kid: Walking to stands Dad: Ignoring kid Kid: At stands Dad: Out of pool, drying off. Frustrated. Grabs bag, grabs kid, leaves How sad. It really seems like I am living in a generation of parents who view their children as one big scheduled distraction to another. It's almost like the dad was saying "Look, little 2 year old boy, I have a busy scheduled. Right now my Outlook Calendar tells me that I have 30 mins to spend with you, so, let's go kid: PERFORM because I have the time" Really? Can someone please tell me when the hell this happened? When did spending time with your kid, spending time with your family, spending time with your spouse, etc... become a distraction? I've seen people at work all day Tweeting throughout the day, checked in with Four Square, IM up and running constantly so they can 'stay in touch' only to see these same folks come home and be irritated because their kids or their spouse wants to connect with the. I've seen these very same people leave the house, go to the corner bar/store/you-name-the-place to be 'alone' only to find them there, plugged in, tweeting away, etc, etc, etc I LOVE technology. I love working with technology. But I also know that I am a human being. A person who, by very definition, is a social being. I needed social interactions and contact--and, no, I'm not talking about the Social Graph kind of connections, I'm talking about those interactions which, *GASP* involve eye to eye contact and human contact. A recent study found that the number one complaint of kids is that they feel they have to compete with technology for their parents time and attention. The number one wish from high school kids? That there parents would turn off the computer/tv/cell phone at dinner. This, coming from high school kids. Shouldn't that tell you a whole helluva lot? So, do yourself a favor tomorrow. Plug into technology all day. Throw yourself into it. Be passionate about what you do. When you walk through the door to your family, turn it all off for 30 mins and be there with your loved ones. If you can manage to play Angry Birds, I'm sure you can handle being disconnected for 30 minutes. Make the time

    Read the article

  • Conversion failed when converting the varchar value to int

    - by onedaywhen
    Microsoft SQL Server 2008 (SP1), getting an unexpected 'Conversion failed' error. Not quite sure how to describe this problem, so below is a simple example. The CTE extracts the numeric portion of certain IDs using a search condition to ensure a numeric portion actually exists. The CTE is then used to find the lowest unused sequence number (kind of): CREATE TABLE IDs (ID CHAR(3) NOT NULL UNIQUE); INSERT INTO IDs (ID) VALUES ('A01'), ('A02'), ('A04'), ('ERR'); WITH ValidIDs (ID, seq) AS ( SELECT ID, CAST(RIGHT(ID, 2) AS INTEGER) FROM IDs WHERE ID LIKE 'A[0-9][0-9]' ) SELECT MIN(V1.seq) + 1 AS next_seq FROM ValidIDs AS V1 WHERE NOT EXISTS ( SELECT * FROM ValidIDs AS V2 WHERE V2.seq = V1.seq + 1 ); The error is, 'Conversion failed when converting the varchar value 'RR' to data type int.' I can't understand why the value ID = 'ERR' should be being considered for conversion because the predicate ID LIKE 'A[0-9][0-9]' should have removed the invalid row from the resultset. When the base table is substituted with an equivalent CTE the problem goes away i.e. WITH IDs (ID) AS ( SELECT 'A01' UNION ALL SELECT 'A02' UNION ALL SELECT 'A04' UNION ALL SELECT 'ERR' ), ValidIDs (ID, seq) AS ( SELECT ID, CAST(RIGHT(ID, 2) AS INTEGER) FROM IDs WHERE ID LIKE 'A[0-9][0-9]' ) SELECT MIN(V1.seq) + 1 AS next_seq FROM ValidIDs AS V1 WHERE NOT EXISTS ( SELECT * FROM ValidIDs AS V2 WHERE V2.seq = V1.seq + 1 ); Why would a base table cause this error? Is this a known issue? UPDATE @sgmoore: no, doing the filtering in one CTE and the casting in another CTE still results in the same error e.g. WITH FilteredIDs (ID) AS ( SELECT ID FROM IDs WHERE ID LIKE 'A[0-9][0-9]' ), ValidIDs (ID, seq) AS ( SELECT ID, CAST(RIGHT(ID, 2) AS INTEGER) FROM FilteredIDs ) SELECT MIN(V1.seq) + 1 AS next_seq FROM ValidIDs AS V1 WHERE NOT EXISTS ( SELECT * FROM ValidIDs AS V2 WHERE V2.seq = V1.seq + 1 );

    Read the article

  • Make conversion to a native type explicit in C++

    - by Tal Pressman
    I'm trying to write a class that implements 64-bit ints for a compiler that doesn't support long long, to be used in existing code. Basically, I should be able to have a typedef somewhere that selects whether I want to use long long or my class, and everything else should compile and work. So, I obviously need conversion constructors from int, long, etc., and the respective conversion operators (casts) to those types. This seems to cause errors with arithmetic operators. With native types, the compiler "knows" that when operator*(int, char) is called, it should promote the char to int and call operator*(int, int) (rather than casting the int to char, for example). In my case it gets confused between the various built-in operators and the ones I created. It seems to me like if I could flag the conversion operators as explicit somehow, that it would solve the issue, but as far as I can tell the explicit keyword is only for constructors (and I can't make constructors for built-in types). So is there any way of marking the casts as explicit? Or am I barking up the wrong tree here and there's another way of solving this? Or maybe I'm just doing something else wrong...

    Read the article

  • Convert old AVI files to a modern format

    - by iWerner
    Hi, we have a collection of old home videos that were saved in AVI format a long time ago. I want to convert these files to a more modern format because the Totem Movie Player that comes with Ubuntu 10.4 seems to be the only program capable of playing them. The files seem to be encoded with a MJPEG codec, and playing them in VLC or Windows Media Player plays only the sound but there is no video. Avidemux was able to open the files, but the quality of the video is severely degraded: The video skips frames and is interlaced (it's not interlaced when playing it in Totem). Neither ffmpeg nor mencoder seems to be able to read the video stream. mencoder reports that it is using ffmpeg's codec. Here's a section from its output: ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family [mjpeg @ 0x92a7260]mjpeg: using external huffman table [mjpeg @ 0x92a7260]mjpeg: error using external huffman table, switching back to internal Unsupported PixelFormat -1 Selected video codec: [ffmjpeg] vfm: ffmpeg (FFmpeg MJPEG) while running ffmpeg produces the following: $ ffmpeg -i input.avi output.avi FFmpeg version SVN-r0.5.1-4:0.5.1-1ubuntu1, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --extra-version=4:0.5.1-1ubuntu1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --disable-stripping --disable-vhook --enable-runtime-cpudetect --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --enable-shared --disable-static libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 1 / 52.20. 1 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libavfilter 0. 4. 0 / 0. 4. 0 libswscale 0. 7. 1 / 0. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Mar 4 2010 12:35:30, gcc: 4.4.3 [avi @ 0x87952c0]non-interleaved AVI Input #0, avi, from 'input.avi': Duration: 00:00:15.24, start: 0.000000, bitrate: 22447 kb/s Stream #0.0: Video: mjpeg, yuvj422p, 720x544, 25 tbr, 25 tbn, 25 tbc Stream #0.1: Audio: pcm_s16le, 44100 Hz, stereo, s16, 1411 kb/s Output #0, avi, to 'output.avi': Stream #0.0: Video: mpeg4, yuv420p, 720x544, q=2-31, 200 kb/s, 90k tbn, 25 tbc Stream #0.1: Audio: mp2, 44100 Hz, stereo, s16, 64 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop encoding frame= 0 fps= 0 q=0.0 Lsize= 143kB time=15.23 bitrate= 76.9kbits/s video:0kB audio:119kB global headers:0kB muxing overhead 20.101777% So the problem is that output does not contain any video, as evidenced by the video:0kB at the end. In all of the above cases the audio comes out fine. So my question is: What can I do to convert these files to a more modern format with more modern codecs?

    Read the article

  • Issuing Current Time Increments in StreamInsight (A Practical Example)

    The issuing of a Current Time Increment, Cti, in StreamInsight is very definitely one of the most important concepts to learn if you want your Streams to be responsive. A full discussion of how to issue Ctis is beyond the scope of this article but a very good explanation in addition to Books Online can be found in these three articles by a member of the StreamInsight team at Microsoft, Ciprian Gerea. Time in StreamInsight Series http://blogs.msdn.com/b/streaminsight/archive/2010/07/23/time-in-streaminsight-i.aspx http://blogs.msdn.com/b/streaminsight/archive/2010/07/30/time-in-streaminsight-ii.aspx http://blogs.msdn.com/b/streaminsight/archive/2010/08/03/time-in-streaminsight-iii.aspx A lot of the problems I see with unresponsive or stuck streams on the MSDN Forums are to do with how Ctis are enqueued or in a lot of cases not enqueued. If you enqueue events and never enqueue a Cti then StreamInsight will be perfectly happy. You, on the other hand, will never see data on the output as you have not told StreamInsight to flush the stream. This article deals with a specific implementation problem I had recently whilst working on a StreamInsight project. I look at some possible options and discuss why they would not work before showing the way I solved the problem. The stream of data I was dealing with on this project was very bursty that is to say when events were flowing they came through very quickly and in large numbers (1000 events/sec), but when the stream calmed down it could be a few seconds between each event. When enqueuing events into the StreamInsight engne it is best practice to do so with a StartTime that is given to you by the system producing the event . StreamInsight processes events and it doesn't matter whether those events are being pushed into the engine by a source system or the events are being read from something like a flat file in a directory somewhere. You can apply the same logic and temporal algebra to both situations. Reading from a file is an excellent example of where the time of the event on the source itself is very important. We could be reading that file a long time after it was written. Being able to read the StartTime from the events allows us to define windows that will hold the correct sets of events. I was able to do this with my stream but this is where my problems started. Below is a very simple script to create a SQL Server table and populate it with sample data that will show exactly the problem I had. CREATE TABLE [dbo].[t] ( [c1] [int] PRIMARY KEY, [c2] [datetime] NULL ) INSERT t VALUES (1,'20100810'),(2,'20100810'),(3,'20100810') Column c2 defines the StartTime of the event on the source and as you can see the values in all 3 rows of data is the same. If we read Ciprian’s articles we know that we can define how Ctis get injected into the stream in 3 different places The Stream Definition The Input Factory The Input Adapter I personally have always been a fan of enqueing Ctis through the factory. Below is code typical of what I would use to do this On the class itself I do some inheriting public class SimpleInputFactory : ITypedInputAdapterFactory<SimpleInputConfig>, ITypedDeclareAdvanceTimeProperties<SimpleInputConfig> And then I implement the following function public AdapterAdvanceTimeSettings DeclareAdvanceTimeProperties<TPayload>(SimpleInputConfig configInfo, EventShape eventShape) { return new AdapterAdvanceTimeSettings( new AdvanceTimeGenerationSettings(configInfo.CtiFrequency, TimeSpan.FromTicks(-1)), AdvanceTimePolicy.Adjust); } The configInfo .CtiFrequency property is a value I pass through to define after how many events I want a Cti to be injected and this in turn will flush through the stream of data. I usually pass a value of 1 for this setting. The second parameter determines the CTI timestamp in terms of a delay relative to the events. -1 ticks in the past results in 1 tick in the future, i.e., ahead of the event. The problem with this method though is that if consecutive events have the same StartTime then only one of those events will be enqueued. In this example I use the following to define how I assign the StartTime of my events currEvent.StartTime = (DateTimeOffset)dt.c2; If I go ahead and run my StreamInsight process with this configuration i can see on the output adapter that two events have been removed To see this in a little more depth I can use the StreamInsight Debugger and see what happens internally. What is happening here is that the first event arrives and a Cti is injected with a time of 1 tick after the StartTime of that event (Also the EndTime of the event). The second event arrives and it has a StartTime of before the Cti and even though we specified AdvanceTimePolicy.Adjust on the factory we know that a point event can never be adjusted like this and the event is dropped. The same happens for the third event as well (The second and third events get trumped by the Cti). For a more detailed discussion of why this happens look here http://www.sqlis.com/sqlis/post/AdvanceTimePolicy-and-Point-Event-Streams-In-StreamInsight.aspx We end up with a single event being pushed into the output adapter and our result now makes sense. The next way I tried to solve this problem by changing the value of the second parameter to TimeSpan.Zero Here is how my factory code now looks public AdapterAdvanceTimeSettings DeclareAdvanceTimeProperties<TPayload>(SimpleInputConfig configInfo, EventShape eventShape) { return new AdapterAdvanceTimeSettings( new AdvanceTimeGenerationSettings(configInfo.CtiFrequency, TimeSpan.Zero), AdvanceTimePolicy.Adjust); } What I am doing here is declaring a policy that says inject a Cti together with every event and stamp it with a StartTime that is equal to the start time of the event itself (TimeSpan.Zero). This method has plus points as well as a downside. The upside is that no events will be lost by having the same StartTime as previous events. The Downside is that because the Cti is declared with the StartTime of the event itself then it does not actually flush that particular event because in the StreamInsight algebra, a Cti commits only those events that occurred strictly before them. To flush the events we need a Cti to be enqueued with a greater StartTime than the events themselves. Here is what happened when I ran this configuration As you can see all we got through was the Cti and none of the events. The debugger output shows the stamps on the Cti and the events themselves. Because the Cti issued has the same timestamp (StartTime) as the events then none of the events get flushed. I was nearly there but not quite. Because my stream was bursty it was possible that the next event would not come along for a few seconds and this was far too long for an event to be enqueued and not be flushed to the output adapter. I needed another solution. Two possible solutions crossed my mind although only one of them made sense when I explored it some more. Where multiple events have the same StartTime I could add 1 tick to the first event, two to the second, three to third etc thereby giving them unique StartTime values. Add a timer to manually inject Ctis The problem with the first implementation is that I would be giving the events a new StartTime. This would cause me the following problems If I want to define windows over the stream then some events may not be captured in the right windows and therefore any calculations on those windows I did would be wrong What would happen if we had 10,000 events with the same StartTime? I would enqueue them with StartTime + n ticks. Along comes a genuine event with a StartTime of the very first event + 1 tick. It is now too far in the past as far as my stream is concerned and it would be dropped. Not what I would want to do at all. I decided then to look at the Timer based solution I created a timer on my input adapter that elapsed every 200ms. private Timer tmr; public SimpleInputAdapter(SimpleInputConfig configInfo) { ctx = new SimpleTimeExtractDataContext(configInfo.ConnectionString); this.configInfo = configInfo; tmr = new Timer(200); tmr.Elapsed += new ElapsedEventHandler(t_Elapsed); tmr.Enabled = true; } void t_Elapsed(object sender, ElapsedEventArgs e) { ts = DateTime.Now - dtCtiIssued; if (ts.TotalMilliseconds >= 200 && TimerIssuedCti == false) { EnqueueCtiEvent(System.DateTime.Now.AddTicks(-100)); TimerIssuedCti = true; } }   In the t_Elapsed event handler I find out the difference in time between now and when the last event was processed (dtCtiIssued). I then check to see if that is greater than or equal to 200ms and if the last issuing of a Cti was done by the timer or by a genuine event (TimerIssuedCti). If I didn’t do this check then I would enqueue a Cti every time the timer elapsed which is not something I wanted. If the difference between the two times is greater than or equal to 500ms and the last event enqueued was by a real event then I issue a Cti through the timer to flush the event Queue, otherwise I do nothing. When I enqueue the Ctis into my stream in my ProduceEvents method I also set the values of dtCtiIssued and TimerIssuedCti   currEvent = CreateInsertEvent(); currEvent.StartTime = (DateTimeOffset)dt.c2; TimerIssuedCti = false; dtCtiIssued = currEvent.StartTime; If I go ahead and run this configuration I see the following in my output. As we can see the first Cti gets enqueued as before but then another is enqueued by the timer and because this has a later timestamp it flushes the enqueued events through the engine. Conclusion Hopefully this has shown how the enqueuing of Ctis can have a dramatic effect on the responsiveness of your output in StreamInsight. Understanding the temporal nature of the product is for me one of the most important things you can learn. I have attached my solution for the demos. It is all in one project and testing each variation is a simple matter of commenting and un-commenting the parts in the code we have been dealing with here.

    Read the article

  • Imagemagick PDF to JPG conversion failing

    - by Scott
    I'm trying to convert the first page of a PDF to a JPG. I'm pretty sure I got this to work with certain PDFs, but is it really possible that certain PDFs are made incorrectly and cannot be converted? I tried running this first: $ convert 10-03-26.pdf[1] test.jpg And I got the follow: Error: /syntaxerror in readxref Operand stack: Execution stack: %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1 3 %oparray_pop 1 3 %oparray_pop --nostringval-- --nostringval-- --nostringval-- --nostringval-- --nostringval-- --nostringval-- Dictionary stack: --dict:1062/1417(ro)(G)-- --dict:0/20(G)-- --dict:73/200(L)-- --dict:73/200(L)-- --dict:97/127(ro)(G)-- --dict:229/230(ro)(G)-- --dict:14/15(L)-- Current allocation mode is local ESP Ghostscript 7.07.1: Unrecoverable error, exit code 1 convert: Postscript delegate failed `10-03-26.pdf'. Running this instead: $ convert -verbose -colorspace rgb '10-03-26.pdf[1]' test.jpg I get the following: Error: /syntaxerror in readxref Operand stack: Execution stack: %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1 3 %oparray_pop 1 3 %oparray_pop --nostringval-- --nostringval-- --nostringval-- --nostringval-- --nostringval-- --nostringval-- Dictionary stack: --dict:1062/1417(ro)(G)-- --dict:0/20(G)-- --dict:73/200(L)-- --dict:73/200(L)-- --dict:97/127(ro)(G)-- --dict:229/230(ro)(G)-- --dict:14/15(L)-- Current allocation mode is local ESP Ghostscript 7.07.1: Unrecoverable error, exit code 1 "gs" -q -dBATCH -dSAFER -dMaxBitmap=500000000 -dNOPAUSE -dAlignToPixels=0 "-sDEVICE=pnmraw" -dTextAlphaBits=4 -dGraphicsAlphaBits=4 "-g792x1611" "-r72x72" -dFirstPage=2 -dLastPage=2 "-sOutputFile=/tmp/magick-XXU3T44P" "-f/tmp/magick-XXoMKL8Z" "-f/tmp/magic2eec1F"Start of Image Define Huffman Table 0x00 0 1 5 1 1 1 1 1 1 0 0 0 0 0 0 0 Define Huffman Table 0x01 0 3 1 1 1 1 1 1 1 1 1 0 0 0 0 0 Define Huffman Table 0x10 0 2 1 3 3 2 4 3 5 5 4 4 0 0 1 125 Define Huffman Table 0x11 0 2 1 2 4 4 3 4 7 5 4 4 0 1 2 119 End Of Image convert: Postscript delegate failed `10-03-26.pdf'. Why would the conversion fail? Just as an aside, this is happening on a (gs) Grid-Service on (mt) Media Temple hosting. I cannot install programs on the server, but both Imagemagick and Ghostscript are installed Thanks!

    Read the article

  • Accelerate your SOA with Data Integration - Live Webinar Tuesday!

    - by dain.hansen
    Need to put wind in your SOA sails? Organizations are turning more and more to Real-time data integration to complement their Service Oriented Architecture. The benefit? Lowering costs through consolidating legacy systems, reducing risk of bad data polluting their applications, and shortening the time to deliver new service offerings. Join us on Tuesday April 13th, 11AM PST for our live webinar on the value of combining SOA and Data Integration together. In this webcast you'll learn how to innovate across your applications swiftly and at a lower cost using Oracle Data Integration technologies: Oracle Data Integrator Enterprise Edition, Oracle GoldenGate, and Oracle Data Quality. You'll also hear: Best practices for building re-usable data services that are high performing and scalable across the enterprise How real-time data integration can maximize SOA returns while providing continuous availability for your mission critical applications Architectural approaches to speed service implementation and delivery times, with pre-integrations to CRM, ERP, BI, and other packaged applications Register now for this live webinar!

    Read the article

  • Reasonable automatic HTML to PDF conversion (in UNIX/Linux environment)

    - by Alex Balashov
    Is there a way to generate PDF documents from HTML files automatically in Linux where the PDF offers some kind of reasonable level of resemblance to the input file? A command-line tool - as opposed to an interactive GUI of some kind - is key. I have tried htmldoc and some related cousins, of course. But these tools are hopelessly stone-age; htmldoc doesn't support CSS at all. You won't find a lot of HTML documents these days that don't have at least some CSS styling. I don't really care about stupid effects or minor embellishments, but the issue is that CSS is at the core of most layouts these days; not many folks are using 6 layers of nested tables anymore. So, if the conversion tool has no grasp of CSS whatsoever, it's not just a matter of "the document doesn't look quite right"; it is likely to not meet the minimum standard of usability at all. It has been suggested to me by some folks to try to use the Gecko rendering engine to generate images that can be converted to PDFs, but I have no idea how one would go about doing this, let alone easily. I have no trouble believing that there are good commercial tools that do this, but I'm really looking for an open-source package if possible, as the endeavour itself is an open-source one and doesn't pay. Thanks in advance!

    Read the article

  • Jump-start Your Mind

    - by João Angelo
    I haven’t written in a while mostly because I’ve spent my time reading what others wrote and today I’m writing purely motivated by what I just finished reading. Mindfire: Big Ideas for Curious Mind by Scott Berkun was such a pleasure to read and ended up igniting parts of my mind which I have to admit were becoming a bit numb that I felt the urge to take some time to first say thank you to the author and then recommend it to all your curious minds out there. Now, go read it… it’s time well spent.

    Read the article

  • Office 365 domain federation conversion failed

    - by Matt Bear
    We're doing things backwards, we have an established o365 domain, with 400+ users, and are just now deploying local AD, and ADFS for SSO. Last night, after configuring my servers, I ran the powershell command convert-MSOLdomaintofederated to convert the xxx.com vanity domain to federated, it errored out with an unspecified error(Microsoft ADFS support said the error has to do with the default password settings being changed.) And when I run convert-MSOLdomaintostandard, it comes back with the domain is already standard. Also in the o365 portal it shows the domain as standard, however it is trying to process login attempts as if it were a federated domain. I've spent 5 hours total on the phone with Microsoft, and it has been escalated to their engineering department for resolution, sometime within the next few days... I need it yesterday. From what we can gather, the conversion process started, error out, changed some of the internal configurations to federated, but left the description as standard.(if that makes since). So its in a weird limbo, where its in both modes but neither at the same time. Currently, the only way to fix it is to remove the vanity domain, and re-add it. I need a way to dissociate the user accounts from xxx.com domain to allow its removal. Removal of all the users themselves is not an option.

    Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >