Search Results

Search found 6186 results on 248 pages for 'triple monitor'.

Page 34/248 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

  • DELL U2410 Monitor(Display Port) & Graphic card

    - by Anj
    I was looking for a 24" monitor and bought the Dell 24" inch ultra sharp monitor which has DisplayPort( new keyword for me) seems it is equivalent to HDMI. Now I would like to enhance the display capabilities for my laptop and desktop(both have VGA output as of now). Couple of questions in mind: Is there a single HD graphic card which i could use for both desktop and laptop? I understand it has to be external but if its costly then I would stick on internal graphic card for my desktop. Please recommend external if its cost effective else I would go for internal one(Budget is around $70 or Rs 4000. Is there a HD card which I could use for both HD video and 5.1 channel audio output? I generally use the computer for office work/ listening music and watching movies, not gaming.

    Read the article

  • Multi-monitor resolution and position settings lost after reboot

    - by SoftDeveloper
    I've had two 1280x1024 monitors running for years on an nVidia 8800GT card with no problems. I've now replaced one monitor with a new 2560x1440 one. The card seems to support both fine, however every time I reboot the resolutions and monitor positions revert to the old settings. I've tried upgrading, downgrading, stripping out and reinstalling many versions of the nvidia drivers to no avail. Logging in as another user doesn't help - same problem. Booting into another another OS (Win7 64) works OK, so it is just this OS installation. During boot up everything looks fine (ie native 2450x1440 res) until the nVidia control panel or something is loaded which flips it back into the old mode. I have no old saved nvidia profiles. I can't find anything in the registry relating to these old settings. Its driving me crazy having to set resolutions and realign monitors on every reboot! Can anybody help?

    Read the article

  • Remote Desktop AND monitor fail on restart (Win2008R2)

    - by Wesley
    I am in the process of building a small 3 server farm. Each machine is running Window Server 2008 R2. As is normal, I am in the process of installing patch after patch to bring the machine up to snuff. Every time I restart the machine, or most every time, when I try to remote in to the machine I get the Log In window, but then almost immediately I get the message that my remote session was ended. If I physically walk over to the machine and plug in a monitor and keyboard, I see nothing. If I leave the keyboard and monitor in and restart the machine by force, the computer reboots just fine. When windows starts, I get no error message about windows not starting or being shut off unexpectedly. Once I log into the machine physically by the keyboard, I can then remote in to the machine at that point. Very confused. This happens on all 3 machines, these machines have different hardware.

    Read the article

  • Monitor disk I/O for specific drive in OS X

    - by raffi
    In my Macbook Pro, I have two internal drives and I've connected a third drive via USB in enclosure. I am currently doing a secure wipe of the external drive and I was interested in seeing what the disk I/O was for that particular drive, but when I use Activity Monitor I only see the total disk usage for all drives combined. Is there any way to monitor a specific drive's total I/O, preferably via a built-in or free method? I don't want to filter by process ID. I just want to filter by mounted disk.

    Read the article

  • Using external monitor and screen resolution?

    - by Johnydep
    it might sound very basic question but i need some help. I have lenovo Ideapad y560p which offers a maximum resolution of 1366px x 768px. Now i am planning to buy an external monitor, and i short listed some FULL HD resolution monitors, but it is my understanding that even with FULL HD, i would only achieve the best resolution my laptop supports. Is it true? And also if this is the case, should i really go for an HD monitor or settle down with a lower resolution version? 2ndly, is there any way to increase resolution with simple upgrade? or it is not possible without voiding the warranty??

    Read the article

  • Recommend a desktop app to monitor port 80 on servers

    - by busyone
    Hello, I did some googling but was unsuccessful, so I am posting here. I am looking to get an app (preferably free/open source) to monitor my servers on port 80 that would send me an email/text when some predefined timeout triggers. I could probably write something in VB to do this but i am burried with projects, why reinvent the wheel. I know there are services out there that want you to pay $5/month to do so, I was thinking about a Windows app that would sit on my computer and simply monitor predefined list of IPs on port 80. Thanks!

    Read the article

  • LCD repair parts for Gateway FPD2275W

    - by eidylon
    Hi all, I am wondering if anyone can point me to someplace where I can buy an inverter and/or backlight bulb for a Gateway FPD2275w LCD monitor. I've been googling, and looking on eBay, but can't seem to find them. I need to repair a monitor... I've done so before with a laptop LCD, so yes, I do know what I'm in for. I just need to find where to buy the parts. Thanks in advance!

    Read the article

  • Old Hardware Specifications

    - by billswift
    Anyone know where I can get specs for old monitors and soho computers? I'm setting up some old computers as linux boxes and especially need monitor specs for setting X Window System parameters. Right now I need specs for a Packard Bell 1024S monitor.

    Read the article

  • Blank displays after inactivity, mouse cursor not showing up

    - by Mike Christiansen
    I have a Windows 7 Enterprise x86 machine that is exhibiting some strange problems. After some inactivity (it varies how long it takes), when I come back to my computer, both of my monitors are black. The monitors are on, with a black display. Moving the mouse and pressing keys on the keyboard do not work. This happens at least once a day. When I first encountered the issue, I performed a hard shutdown and restarted the computer. About 10% of the time when I did this, the resolutions on my monitors were messed up. The native resolution on the primary monitor is 1600x900, and the native on my secondary is 1440x900. None of the widescreen resolutions would be present in the display properties. I had 800x600, 1024x768, and 1280x1024. As a workaround to this issue, I've found that if I plug in my secondary monitor as the primary monitor, and leave the secondary unplugged, then Windows will start in 1024x768 on the secondary. Then, I can use Windows 7's "Detect" feature and it finds the 1440x900 resolution, and sets it. Then I have to connect the primary monitor to the secondary port and set it as the primary. Then I can switch the two cables, putting the primary into the primary, the secondary into the secondary. Then use the "Detect" feature again, and it finds the correct resolutions. Some time after performing the above, I discovered that when the screens were blanked, I could simply press "Control+Alt+Delete", type in my password, and everything comes up fine - except my mouse cursor. All applications and features work as intended, except there is no mouse cursor (the mouse actually works though...). I have the "Show location of pointer when I press CTRL key" option selected, so I can press CTRL and use my mouse as normal - but I have no actual cursor. When the computer is in this state, UAC is also not functional. Whenever a UAC prompt appears, the screens go black (the original symptoms) and I have to press Escape to exit UAC. Because of the above symptoms (the UAC black screen thing, etc) I beleive winlogon.exe may be the culprit. However, I have no idea how to fix it. I am unable to restart winlogon.exe due to the problems I am having with winlogon.exe (the UAC black screen) Looking for any ideas.... More information Windows 7 x86 Enterprise Domain environment (I have a secondary account with administrator rights) Dell Optiplex 960 Cannot perform "optional" windows updates due to an activation issue (I am testing a windows 7 image, and an activation infrastructure has not been created yet. However, this issue was happening before I was unable to perform windows update, and windows was up to date at the time Updated video card driver (as an attempt to fixing the resolution issue) Disabled all power saving options Please let me know what else you need to help me solve this issue! Thanks in advance, Mike

    Read the article

  • 1680x1050 via VGA won't work correctly in Windows 7 32bit

    - by Boldor
    I am trying to connect a Samsung 22" SyncMaster with my laptop running Windows 7 32-bit, an AMD HD 6500 Mobility. Though Catalyst Control Centre as well as Windows identify the correct resolution of 1650x1080, and it is selected, it isn't displayed. Looks more like a lower resolution that's getting stretched over the monitor. The weird part: The monitor worked for years without problems, one day it decided not to work properly anymore. Maybe some update issue, I have no idea.

    Read the article

  • nvidia on ubuntu 10.10: switching dvi socket

    - by lurscher
    i have ubuntu 10.10 x86_64 with nvidia 9800 gt and nvidia driver version 270.41.06 my video card has two DVI sockets, but i only use single monitor configuration. Now, i think the main DVI socket might be busted, so i want to try to enable the other as the main one, however, i don't know how to achieve that. I tried just plugging the monitor in that socket but it won't just auto-detect (it would have been way too easy to just work)

    Read the article

  • Conventions for the behavior of double or triple "click to select text" features?

    - by John Sullivan
    Almost any mature program that involves text implements "double click to select the word" and, in some cases, "triple click to select additional stuff like an entire line" as a feature. I find these features useful but they are often inconsistent between programs. Example - some programs' double clicks do not select the ending space after a word, but most do. Some recognize the - character as the end of a word, others do not. SO likes to select the entire paragraph as I write this post when I triple click it, VS web developer 2005 has no triple click support, and ultra-edit 32 will select one line upon triple clicking. We could come up with innumerable inconsistencies about how double and triple click pattern matching is implemented across programs. I am concerned about how to implement this behavior in my program if nobody else has achieved a convention about how the pattern matching should work. My question is, does a convention (conventions? maybe an MS or Linux convention?) exist that dictates how these features are supposed to behave to the end user? What, if any, are they?

    Read the article

  • Calculating Screen Resolutions Using WPF

    - by Jeff Ferguson
    WPF measures all elements in device independent pixels (DIPs). These DIPs equate to device pixels if the current display monitor is set to the default of 96 DPI. However, for monitors set to a DPI setting that is different than 96 DPI, then WPF DIPs will not correspond directly to monitor pixels. Consider, for example, the WPF properties SystemParameters.PrimaryScreenHeight and SystemParameters.PrimaryScreenWidth. If your monitor resolution is set to 1024 pixels wide by 768 pixels high, and your monitor is set to 96 DPI, then WPF will report the value of SystemParameters.PrimaryScreenHeight as 768 and the value of SystemParameters.PrimaryScreenWidth as 1024. No problem. This aligns nicely because the WPF device independent pixel value (96) matches your monitor's DPI setting (96). However, if your monitor is not set to display pixels at 96 DPI, then SystemParameters.PrimaryScreenHeight and SystemParameters.PrimaryScreenWidth will not return what you expect. The values returned by these properties may be greater than or less than what you expect, depending on whether or not your monitor's DPI value is less than or greater than 96. Since the SystemParameters.PrimaryScreenHeight and SystemParameters.PrimaryScreenWidth properties are WPF properties, their values are measured in WPF DIPs, rather than taking monitor DPI into effect. Once again: WPF measures all elements in device independent pixels (DIPs). To combat this issue, you must take your monitor's DPI settings into effect if you're looking for the monitor's width and height using the monitor's DPI settings. The handy code block below will help you calculate these values regardless of the DPI setting on your monitor: Window MainWindow = Application.Current.MainWindow; PresentationSource MainWindowPresentationSource = PresentationSource.FromVisual(MainWindow); Matrix m = MainWindowPresentationSource.CompositionTarget.TransformToDevice; DpiWidthFactor = m.M11; DpiHeightFactor = m.M22; double ScreenHeight = SystemParameters.PrimaryScreenHeight * DpiHeightFactor; double ScreenWidth = SystemParameters.PrimaryScreenWidth * DpiWidthFactor; The values of ScreenHeight and ScreenWidth should, after this code is executed, match the resolution that you see in the display's Properties window.

    Read the article

  • Graphics and USB devices freezing soon after OS loads

    - by Andrew
    I run Ubuntu/Windows dual boot. Last night I started the upgrade to Ubuntu 12.04, and my computer has not worked since in either Windows or Ubuntu. Here's what I got when I rebooted after the upgrade, and continue to get every time I boot: Gets to GRUB screen OK. Choose Ubuntu - black screen or crazy purple lines. At first I assumed something went wrong with the upgrade (often happens). Choose Windows - works fine, I log in, but soon after that the graphics freeze (sometimes with purple artifacts). The keyboard and mouse (both USB) also lose power at the same instant, and none of the USB ports have power to them. This happens sooner or later every time I boot. Update: the HDD also appears to lose power at the same point. I have tried a live CD, but my computer refuses to boot any CD even after disabling all other boot options in the BIOS. I have disconnected everything except keyboard, mouse, graphics card with one monitor, one RAM sick and HDD; no change. I also took the little battery out to reset CMOS. I am pretty sure no matter how wrong the Ubuntu upgrade went, it wouldn't cause the above symptoms in Windows. So the only explanation I can think of is that a hardware failure occurred at the same time. Some possible causes of this I can think of are: A couple of days before this, I added a third screen (which worked fine). About a week before, my house lost power in a storm (no ill effects over the past few days though). What can I do, other than buy a new motherboard/CPU and hope it works? Unfortunately I don't have another box to swap parts into to test at the moment.

    Read the article

  • Dual Monitor support rdp 7 to win 7 on esxi

    - by rphilli5
    I am trying to RDP from a Windows 7 Professional dual monitor physical machine to a Windows 7 Professional VM hosted on esxi 4.0. I can get the spanning option to work to both monitors, but I have tried 3 different methods of connecting but have not been able to use true multiple monitors. At different times, I tried checking the "use all monitors" option, command line mstsc /multimon and added the line use multimon:i:1 to the .rdp file. None of these worked. Any ideas? The physical machine can connect to other Windows 7 physical machines with true multi monitor access. I also have the same issue when going from a 32bit RC1 machine to a Windows 7 Professional x64, but not when going in the reverse direction. Here's the .rdp: screen mode id:i:2 use multimon:i:1 desktopwidth:i:1440 desktopheight:i:900 session bpp:i:16 winposstr:s:0,1,341,118,1139,568 compression:i:1 keyboardhook:i:2 audiocapturemode:i:0 videoplaybackmode:i:1 connection type:i:1 displayconnectionbar:i:1 disable wallpaper:i:1 allow font smoothing:i:0 allow desktop composition:i:0 disable full window drag:i:1 disable menu anims:i:1 disable themes:i:1 disable cursor setting:i:0 bitmapcachepersistenable:i:1 full address:s:192.168.1.5 audiomode:i:0 redirectprinters:i:1 redirectcomports:i:0 redirectsmartcards:i:1 redirectclipboard:i:1 redirectposdevices:i:0 redirectdirectx:i:1 autoreconnection enabled:i:1 authentication level:i:2 prompt for credentials:i:0 negotiate security layer:i:1 remoteapplicationmode:i:0 alternate shell:s: shell working directory:s: gatewayhostname:s: gatewayusagemethod:i:4 gatewaycredentialssource:i:4 gatewayprofileusagemethod:i:0 promptcredentialonce:i:1 use redirection server name:i:0 drivestoredirect:s:

    Read the article

  • How to monitor process hogging CPU on a remote server

    - by sergeb
    I have a remotely hosted (virtual, VMware) dedicated server (Windows 2008 Server Web edition w/ SP1) that I can only connect to over Remote Desktop. Lately, a process hogs CPU for ~40 minutes most every day (at a random hour) and brings all web sites on the server down. While this is going on I also cannot connect using Remote Desktop to investigate on what is that process... Promptly after 40 min I can RD and the first thing I see on the Perf Monitor is that there was something topping the CPU at 100% and stops just before I'm able to RD... I'm aware of the beginning and end of this for I have monitors setup that email me up/down status of the web sites but I'm locked out while this is happening - can't RD to the server until it's over (and too late to see the Task Manager/Process Explorer picture). What is the best way/tool to setup on the server to continuously monitor all processes so when this happens I login and "replay" it to find the process causing this trouble? (I have no control over the virtual/VMware setup for it is hosted by a 3rd-party but I have most full control over my dedicated machine) Thanks in advance!

    Read the article

  • My EliteBook is not auto picking 1080p for external monitor, poor display on forcing

    - by Griever
    I'm connecting my Samsung LED S22A300B to my HP EliteBook 6930p through VGA out. Laptop has Intel 4500MHD video card. I have latest drivers installed for both card and monitor. Only 800x600 and 1024x768 are shown. A lot of other people get this problem when they use it with docking station as discussed here. But I am not using any docking station. The monitor works great with my desktop though. As advised on the aforementioned page, one of the things I tried was to force the resolution using Intel's "custom resolution" feature. I installed PowerStrip on my desktop and copied advanced timing values(front/back porch,sync width, etc.) from there and then used the same values while defining a custom resolution in my laptop's Intel graphics utility. As a result, I got the 1080p resolution but the display is poor. Text has some weird colored shadow and sometimes on images too. What should I do?

    Read the article

  • How can I setup BluePill to Monitor a Rails App Running via Passenger (mod_rails)

    - by Jim Jeffers
    I recently launched a site running phusion passenger. Unfortunately, the site went down due to a frozen thread. I was able to save the server by doing kill -9 to the specific PID. Still though, I thought passenger was able to manage this automatically. I have a server with 1GB of memory running one rails app with passenger allotted up to 7 instances. However, when I came to discover the site went down I found that passenger had spawned 6 instances with one of them using up over 800mb of memory causing the server to swap. As a result I am hoping to setup something like bluepill on the server but I'm slightly confused as to how you go about doing it. Mainly because bluepill expects to start/stop the processes it's monitoring. However, in our case, passenger already restarts processes for us so we only need to monitor the pids of passengers instances and kill them once they've gotten too large. Has anyone here setup BluePill to monitor a rails app running under phusion's passenger? Any insight would be useful.

    Read the article

  • Toshiba monitor not displaying anything

    - by MirroredFate
    Alright, so I agreed to fix a friends computer, thinking it was a software problem, not hardware. I was going to use an XP disc and valid code to swap her from Vista to XP, as apparently Vista had some driver issues. I found out, however, that the real problem was her heat sink was completely clogged, causing the computer to overheat and shut down. So, I took the computer apart and cleaned the heat sink. However, after putting it all back together, and turning it on, nothing at all shows up. I plugged in an external monitor, and nothing shows up on that either. I have double, triple, decuply checked all the connections and everything appears to be plugged in, attached, and in the right place. I am out of ideas. So, my question is, does anyone have any clue what is going on, and have suggestions I could try?

    Read the article

  • Enabling hardware acceleration and Xinerama for multi-monitor/multi-GPU in Linux

    - by mynameiscoffey
    My current setup is three monitors connected as follows (monitors listed from left to right): GPU0 (nVidia GTX 280): - Dell 2405FPW (1920x1200) - Dell U2410 (1920x1200) GPU1 (nVidia 210): - Dell 2405FPW (1920x1200) Works like a charm in Windows 7, not so much in Linux. I seem to only have three real options: Run all three monitors as a seperate X screen, I get hardware acceleration but as they are all independent X sessions I cannot move windows between them and can only have firefox open on one at any given time. Run the two on GPU0 in TwinView mode and have GPU1 as a seperate X screen. Same limitation as 1 but at least two monitors work together ok. I did have an issue where occasionally Linux saw both monitors on GPU0 as a single large monitor however. Enable Xinerama and have everything work as I want it to but hardware acceleration is gone and the display is Windows 95 style choppy. My ideal solution would be to have all screens working as they do under Xinerama without the limitation of having hardware acceleration disabled. I don't even care if that means rendering all three on GPU0 and somehow farming out the display of the third monitor to GPU1, whatever works. My question is this: is there any way to accomplish this? I don't feel like my use case is so out there that there shouldn't be at least some form of support (beyond the three limited options presented above), or is my best option going to be to just suck it up and pick up a better card to replace both that can handle three outputs by itself?

    Read the article

  • 1080p monitor: connected through VGA - perfect, HDMI - awful

    - by develroot
    When I connect my 23" monitor (1920x1080) to my pc through HDMI, I encourage some problems. It's not full screen That's it. There are ~1cm black borders on right and left side and ~0,5cm black borders on the top and the bottom of the monitor. That's pretty frustrating. I tried adjusting overscan, but I can't mannualy type the % of overscan that I need. I can only select between ex. 8 and 10% in AMD Vision Engine Control center, but what I need is 9%. Next, even if i select 10% and the image fits all the corners, but after log off all the settings are lost and I have to do it again and again. Text, images, everything looks blurry That surprised me a lot. Should'nt HDMI quality be better than VGA's one? When connected through HDMI, the text isn't readable. It's like a very low refresh rate, although i'm running at 60Hz. Also the text has something like little shadows, very very annoying. Are there any tips to get the same quality as with VGA, with HDMI ? (running on integrated ATI Radeon HD4200, which, appearently, is the best card I have ever seen in terms of integrated ones)

    Read the article

  • How can I setup BluePill to Monitor a Rails App Running via Passenger (mod_rails)

    - by Jim Jeffers
    I recently launched a site running phusion passenger. Unfortunately, the site went down due to a frozen thread. I was able to save the server by doing kill -9 to the specific PID. Still though, I thought passenger was able to manage this automatically. I have a server with 1GB of memory running one rails app with passenger allotted up to 7 instances. However, when I came to discover the site went down I found that passenger had spawned 6 instances with one of them using up over 800mb of memory causing the server to swap. As a result I am hoping to setup something like bluepill on the server but I'm slightly confused as to how you go about doing it. Mainly because bluepill expects to start/stop the processes it's monitoring. However, in our case, passenger already restarts processes for us so we only need to monitor the pids of passengers instances and kill them once they've gotten too large. Has anyone here setup BluePill to monitor a rails app running under phusion's passenger? Any insight would be useful.

    Read the article

  • Debian Squeeze - Monitor outgoing traffic

    - by Sam W.
    I have a small webserver that running on Lighttpd 1.4 which steadily uses 250GB or less bandwidth for the past couple of months. But since May the traffic spikeed to more than triple of what it was. Nothing special was on my site to make its spike like that. When I checked with vnstat I found that 70% of the bandwidth is tx. I suspect I've been hacked and my webserver is becoming some sort of bot. ClamAV comes out with nothing and I already replaced the Joomla installation with a fresh one, early in June. But right now the traffic stayed the same. My question, how can I monitor my server and look what is transmitting all that data out? My need to be done to pinpoint what is the culprit. Can someone please point to the right way to solve this? Thank you.

    Read the article

  • Cannot set up dual monitors correctly in Fedora15 with KDE.

    - by adivasile
    I have 2 monitors: 24" LCD connected via DVI(primary) 19" LCD connected via VGA(secondary) Everytime Fedora starts the second display is always set to clone the first one and they both run at 1280x1024 and I always have to disable the 19" monitor, in order for the bigger one to run at 1920x1080. I want to set them up so that my secondary monitor extends the primary one.The problem is that no matter what kind of configuration I choose it has no effect.My secondary monitor remains disabled. I've tried using both the Display manager from KDE and the ATI Control Panel and the behaviour is always the same.The moment I click apply, the screen flickers and nothing changes. I've succesfully used the extended setup in Fedora15 with Gnome3. I have a RadeonHD 4300 series videocard and I'm using the drivers downloaded from the AMD site. This is the output of xrandr -q : Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 1920 x 1920 VGA-0 connected (normal left inverted right x axis y axis) 1280x1024 75.0 60.0 1280x960 60.0 1152x864 75.0 1024x768 75.0 70.1 66.0 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 75.0 72.8 66.7 59.9 720x400 70.1 DVI-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0*+ 60.0 1680x1050 59.9 1600x900 60.0 1280x1024 75.0 60.0 1280x960 60.0 1152x864 75.0 1280x720 60.0 1152x720 60.0 1024x768 75.0 60.0 832x624 74.6 800x600 75.0 60.3 640x480 75.0 59.9 720x400 70.1 Later edit: The problem seems to come from the ATI drivers.I managed to set up the monitors like I wanted after I uninstalled the drivers. Unfortunately I'm working on an OpenCL project so I had to reinstall them.The moment I did that, all my previous settings were forgotten and I was back to square one.

    Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >