Search Results

Search found 14694 results on 588 pages for 'zend controller router'.

Page 34/588 | < Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >

  • Identify machines behind a router uniquely based on ipaddress

    - by Amith George
    Some background first. I have a .net client agent installed on each of the machines in the lan. They are interacting with my central server [website] also on the same lan. It is important for my website to figure out which of the machines can talk to each other. For example, machines of one subnet cannot directly talk to machines of another subnet without configuring the routers and such. But machines in the same subnet should be able to talk to each other directly. The problem I am facing is when the lan setup is like in Figure 1. Because Comp1, Comp2 and Comp3 are behind a router, they have got the ipaddress 192.168.1.2 till 192.168.1.4. My client agent on these machines report the same ipaddress back to the server. However, machines Comp4, Comp5 also have the same ipaddresses. Thus, as far as my server is concerned, there are 2 machines with the same ipaddress. Not just that, because the subnet mask is 255.255.255.0 for all machines, my server is fooled into thinking that Comp1 can directly talk to Comp5, which is not possible. So, how do I solve this? What do I need to change in my client or in my server, so that I can support this scenario. These two are the only things in my control.

    Read the article

  • Share laptop Wi-Fi with router set up as access point via ethernet cables

    - by obie
    I have an ADSL modem which serves as a wireless router. There's a laptop connected to it through cable. On the other room I have a laptop which is connected through the router wirelessly. Since I have other appliances that need to get connected but are not Wi-Fi capable I have another Wi-Fi router. How can I share the second laptop's Wi-Fi with the second router so that the router can then serve as an access point to give internet to my other appliances through ethernet cables? I want something like this: INTERNETMODEM (WIFI)LAPTOP 1 (WIFI)LAPTOP 2 (WIFI)Router 2 (ETHERNET)DREAMBOX & WDTV What I've tried so far is opened the admin interface of router 2 then set static IP 192.168.100.13 and disabled the DHCP. The DHCP of the main router starts with 192.168.100.1 then I hooked up router 2 with the laptop 2 through Cat5 cable but for some reason it's not working.

    Read the article

  • Controller Error: Do I need to worry?

    - by Kryten
    Hi, I have a HP Pavillion dv5224ea Laptop with Windows 7 on it. Recently I discovered a Error in Event Viewer: The driver detected a controller error on \Device\Ide\IdePort1. (more details): - System - Provider [ Name] atapi - EventID 11 [ Qualifiers] 49156 Level 2 Task 0 Keywords 0x80000000000000 - TimeCreated [ SystemTime] 2010-03-07T12:43:07.090197600Z EventRecordID 30198 Channel System Computer Alistair-Win7 Security - EventData \Device\Ide\IdePort1 0000100001000000000000000B0004C002000000850100C00000000000000000000000000000000000000000000000000000000004100000 -------------------------------------------------------------------------------- Binary data: In Words 0000: 00100000 00000001 00000000 C004000B 0008: 00000002 C0000185 00000000 00000000 0010: 00000000 00000000 00000000 00000000 0018: 00000000 00001004 In Bytes 0000: 00 00 10 00 01 00 00 00 ........ 0008: 00 00 00 00 0B 00 04 C0 .......À 0010: 02 00 00 00 85 01 00 C0 ......À 0018: 00 00 00 00 00 00 00 00 ........ 0020: 00 00 00 00 00 00 00 00 ........ 0028: 00 00 00 00 00 00 00 00 ........ 0030: 00 00 00 00 04 10 00 00 ........ Event Viewer is recording A LOT of these errors (sometimes 13, one after the other!). Do I need to worry? What does this error mean? What device could "\Device\Ide\IdePort1" be? What is a ATAPI Error? Do I need to re-install Windows? I generally find the occurs when I try to backup my machine (using Windows Backup) or when using a program that uses Volume Shadow Copy. I have run "sfc", no problems. There are no Device Errors in Device Manager. I have also run "vssadmin list writers", no problems. Whats going on??? Would it be a good idea to re-install Windows 7?

    Read the article

  • Controller Error: Do I need to worry?

    - by Kryten
    I have a HP Pavillion dv5224ea Laptop with Windows 7 on it. Recently I discovered a Error in Event Viewer: The driver detected a controller error on \Device\Ide\IdePort1. (more details): - System - Provider [ Name] atapi - EventID 11 [ Qualifiers] 49156 Level 2 Task 0 Keywords 0x80000000000000 - TimeCreated [ SystemTime] 2010-03-07T12:43:07.090197600Z EventRecordID 30198 Channel System Computer Alistair-Win7 Security - EventData \Device\Ide\IdePort1 0000100001000000000000000B0004C002000000850100C00000000000000000000000000000000000000000000000000000000004100000 -------------------------------------------------------------------------------- Binary data: In Words 0000: 00100000 00000001 00000000 C004000B 0008: 00000002 C0000185 00000000 00000000 0010: 00000000 00000000 00000000 00000000 0018: 00000000 00001004 In Bytes 0000: 00 00 10 00 01 00 00 00 ........ 0008: 00 00 00 00 0B 00 04 C0 .......À 0010: 02 00 00 00 85 01 00 C0 ......À 0018: 00 00 00 00 00 00 00 00 ........ 0020: 00 00 00 00 00 00 00 00 ........ 0028: 00 00 00 00 00 00 00 00 ........ 0030: 00 00 00 00 04 10 00 00 ........ Event Viewer is recording A LOT of these errors (sometimes 13, one after the other!). Do I need to worry? What does this error mean? What device could "\Device\Ide\IdePort1" be? What is a ATAPI Error? Do I need to re-install Windows? I generally find the occurs when I try to backup my machine (using Windows Backup) or when using a program that uses Volume Shadow Copy. I have run "sfc", no problems. There are no Device Errors in Device Manager. I have also run "vssadmin list writers", no problems. Whats going on??? Would it be a good idea to re-install Windows 7?

    Read the article

  • How do I use the Zend Youtube API correctly?

    - by pharma_joe
    I am trying to access the YouTube API with the Zend libraries that I have included like this (the full path to the Zend library is components/lib/Zend/Gdata.php): //Include Zend Gdata set_include_path('components/lib'); include("Zend/Gdata.php"); I now try to use the framework thus: //Access video data via Zend library $yt = new Zend_Gdata_YouTube(); However when running the script it returns: Fatal error: Class 'Zend_Gdata_YouTube' not found in E:\inetpub\students\fit3060\20712510\ass2\results.php on line 48 I think I have not included the Zend library properly or declared the include path correctly?

    Read the article

  • Can't get Zend Studio and PHPunit to work together

    - by dimbo
    I have a created a simple doctrine2/zend skeleton project and am trying to get unit testing working with zend studio. The tests work perfectly through the PHPunit CLI but I just can't get them to work in zend studio. It comes up with an error saying : 'No Tests was executed' and the following output in the debug window : X-Powered-By: PHP/5.2.14 ZendServer/5.0 Set-Cookie: ZendDebuggerCookie=127.0.0.1%3A10137%3A0||084|77742D65|1016; path=/ Content-type: text/html <br /> <b>Warning</b>: Unexpected character in input: '\' (ASCII=92) state=1 in <b>/var/www/z2d2/tests/application/models/UserModelTest.php</b> on line <b>8</b><br /> <br /> <b>Warning</b>: Unexpected character in input: '\' (ASCII=92) state=1 in <b>/var/www/z2d2/tests/application/models/UserModelTest.php</b> on line <b>8</b><br /> <br /> <b>Parse error</b>: syntax error, unexpected T_STRING in <b>/var/www/z2d2/tests/application/models/UserModelTest.php</b> on line <b>8</b><br /> The test is as follows: <?php require_once 'Zend/Application.php'; require_once 'Zend/Test/PHPUnit/ControllerTestCase.php'; abstract class ControllerTestCase extends Zend_Test_PHPUnit_ControllerTestCase { public function setUp() { $this->bootstrap = new Zend_Application( 'testing', APPLICATION_PATH . '/configs/application.ini' ); parent::setUp(); } public function tearDown() { parent::tearDown(); } } <?php class IndexControllerTest extends ControllerTestCase { public function testDoesHomePageExist() { $this->dispatch('/'); $this->assertController('index'); $this->assertAction('index'); } } <?php class ModelTestCase extends PHPUnit_Framework_TestCase { protected $em; public function setUp() { $application = new Zend_Application( 'testing', APPLICATION_PATH . '/configs/application.ini' ); $bootstrap = $application->bootstrap()->getBootstrap(); $this->em = $bootstrap->getResource('entityManager'); parent::setUp(); } public function tearDown() { parent::tearDown(); } } <?php class UserModelTest extends ModelTestCase { public function testCanInstantiateUser() { $this->assertInstanceOf('\Entities\User', new \Entities\User); } public function testCanSaveAndRetrieveUser() { $user = new \Entities\User; $user->setFirstname('wjgilmore-test'); $user->setemail('[email protected]'); $user->setpassword('jason'); $user->setAddress1('calle san antonio'); $user->setAddress2('albayzin'); $user->setSurname('testman'); $user->setConfirmed(TRUE); $this->em->persist($user); $this->em->flush(); $user = $this->em->getRepository('Entities\User')->findOneByFirstname('wjgilmore-test'); $this->assertEquals('wjgilmore-test', $user->getFirstname()); } public function testCanDeleteUser() { $user = new \Entities\User; $user = $this->em->getRepository('Entities\User')->findOneByFirstname('wjgilmore-test'); $this->em->remove($user); $this->em->flush(); } } And the bootstrap: <?php define('BASE_PATH', realpath(dirname(__FILE__) . '/../../')); define('APPLICATION_PATH', BASE_PATH . '/application'); set_include_path( '.' . PATH_SEPARATOR . BASE_PATH . '/library' . PATH_SEPARATOR . get_include_path() ); require_once 'controllers/ControllerTestCase.php'; require_once 'models/ModelTestCase.php'; Here is the new error after setting PHP Executable to 5.3 as Gordon suggested: X-Powered-By: PHP/5.3.3 ZendServer/5.0 Set-Cookie: ZendDebuggerCookie=127.0.0.1%3A10137%3A0||084|77742D65|1000; path=/ Content-type: text/html <br /> <b>Fatal error</b>: Class 'ModelTestCase' not found in <b>/var/www/z2d2/tests/application/models/UserModelTest.php</b> on line <b>4</b><br />

    Read the article

  • Zend/PHP: Problem uploading/downloading file to/from MySQL's BLOB field.

    - by NAVEED
    I am uploading file(any type) like this: (It is uploading content of file in blob field of mysql) $organizationModel = new Model_Organization_Object( organizationId ); $myFile = file_get_contents( '../path/to/my/file/filename.ext' ); $organizationModel->setOrganizationProfile( $myFile ); $organizationModel->save(); Now I want to get that file from database and want to download. I doing this in controller's action: (I am aspecting pdf file here therefore it is hardcoded below. But in future I want to download any file from blob field) $organizationModel = new Model_Organization_Object( $organizationId ); $content = $organizationModel->getOrganizationProfile(); header('Content-Type: application/octet-stream'); header("Content-Length: " . strlen($content) ); header('Content-Disposition: attachment; filename=orgProfile.pdf'); $this->view->organizationProfile = $content; Now in view file I am doing this: echo $this-organizationProfile; But above download process print(echo) the content of file in firbug and does not download file in orignal format. My echo output in firebug is like this: %PDF-1.3 %???? 84 0 obj << /Linearized 1 /O 86 /H [ 541 212 ] /L 958398 /E 11238 /N 27 /T 956600 >> endobj xref 84 7 0000000016 00000 n 0000000486 00000 n 0000000753 00000 n 0000000982 00000 n 0000001102 00000 n 0000000541 00000 n 0000000732 00000 n trailer << /Size 91 /Info 83 0 R /Root 85 0 R /Prev 956590 /ID[<0a8d7035bf08791da591e8cae39b8c49><0a8d7035bf08791da591e8cae39b8c49>] >> startxref 0 %%EOF 85 0 obj << /Type /Catalog /Pages 82 0 R >> endobj 89 0 obj << /S 151 /Filter /FlateDecode /Length 90 0 R >> stream H?b```f``?e`b`?f`@\0?.????\\I~aV$?X??dO????bA?Az?lv1o#?{-????1+??G?????N`?b? >?-?? \0\0D40 endstream endobj 90 0 obj 106 endobj 86 0 obj << /Type /Page /Contents 87 0 R /Parent 79 0 R /Resources << /XObject << /img0 88 0 R >> /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] >> /MediaBox [ 0 0 612 792 ] /CropBox [ 0 0 612 792 ] /Rotate 0 >> endobj 87 0 obj << /Filter /FlateDecode /Length 46 >> stream x?+T05???P0\0Bs#SC=S3c3??\\???t?|?@.\0??? endstream endobj 88 0 obj << /Filter /FlateDecode /Type /XObject /Length 8926 /BitsPerComponent 8 /Height 1122 /ColorSpace [ /Indexed /DeviceRGB 255 (\0\0\0JJJkkk{{{????????????????????????????????????\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0) ] /Subtype /Image /Width 793 >> stream x???v??\0?bF???mf?\\3??k?~? ?7uj??\\\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0~??/\0~??/\0~?&|??tp?pKS ????Fc???!?Q~?72?&???>???]?$?KUo????9?Tx??E8U}?????? _#=??6 Q{????v?T|s?>\\??w??.|??8?7Q????o.?o????????G??x??|?Is:??????oN>4???jJ?F?v? ? V?q<???P?????I>?.|?iT? ???Ç?Q?m????G?8c`????a`<?.|??~`????OG!?x7j??K*]??S?1??_??1\'?D?????0??\"?w\\?e?????<F:4????E-??Fa????O?v????9??_ m???P??8iuTr?i?FX?????<C? ????t:?(0??I>?2`????.???:??pv:???A??<$M??????e9??\\c???.0???t?kum?K;??<???\\@?]f/?h??m_???g???l?8&??*??2?-??Ew?4[j?v?(?????p?T???M--?8 cb??]?h??pN???kt?J$?m???X???5Cr?]?Jm?VP?X?Ð!? ?$???-?PM??O]??,?h???r=???qV}?p*?c?uq??t??????R6v??l8?I?e?9 {s\\K _?CN?^??W?8%p\']?2U?D{???Z?EB?*?d?va1^??Z\"?7?t]?TL?^??d???.|?4?q?2?&2??S{(??G?vNi4?D?K?)_^?]???D]DK???j?9????OQ?]???us?n?T4?om?P??E?|?t??w?????c?7>!]?\"}$??:??<????[9?C??Wi?u?su#9?\0?t?u=??=w??Q??A??.?dyb vN?N\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0??U/????<??v????S?A\\??qkm? !???&??J????!,??+?w;????{?!D???K×%5?E???????|n?FT*,? ?? ?j#Q??uT~r:}\\?_?????v???8Q?&? ???T?S?I\"?(>Y??????}H??aj?3??u?h?T?X?Z?-~??c\'P?^??d?????????]_???z??O]?q?????7??|?mN%??????T?????o???sUzT???m?v8?q? ??e]?wS???C~Ta???.??[%!??????2x]n~?7??????6.????K??;c }????r?)V?? u???*?7?$c\\???m?~???r??)U{?????????R?? ??D1L_????WUog?>??/?????????~?%???M???}\'?? ;???y??K`?????O?,??????<?,0???;3 #??m?v???aZ=?N?u?J`??dwnm;??.??k?n?K1-M?7????H&??????s?C??? ?}Z?1????c?(0?q?_1??7?%???G7U/??h9I??????S?Q??4nc?Lq??H6??;??c(/O??2???-?*_????%?I?/??I?o????ô?k??<????q??\'??]v?\"??+????,????qxgk?\\\\?6???7??Y???.G???Y??8??.??*???M_??J?hu1????z??W?o_??F?/???s?:?Y~??>0?g\\E?l?K5e???&L?/????k$????{?:\\>??Fs?-??l?>c??o?????9?V+?2;??}q?4 ?zS?|u?A`dK???n~?s???K?hiY?j??#p???S?M\\???0P2?\\*?m+?L5Er????[W?>9|???i?????}`Nmc:Qv??]&|?_????fx???????Ns~w??to????K?M???uN????0J6q1??u(b?M?_?????7?]?m?\':????S@???4?????\\??@~Mn?????|}?9?F6_Vr ??7??{?_??_????Y?Go?9??f1????E?|?Ucd? ????????t7k?? }??:??n?M?_????#?M$DG???:Z??y??;g:?|????F?m??e?F*?uJ?C??-?v?%??^?*??????z:l???w?e???9??i?5j???x?~??Ao???a?x?{?UL??? ??#:???\'^?????W??f;?u???ejq¯?u[?2K8??e?>/?ug?@S??L???? ??u0uI~?z?YYV???[[O?T??-Y?u?j?M?_???n&??7O?f??s??z`.`?,W??#?l??n???s??\'?????=??&#?z?M7_????s???x??y? ??u?p?G???0?e?G????8]{??N?1}??}~Q?[)?XF??_??*? p7iQ????M?(?l????????????f??6????*??U;@~\\k?i??w_??*?#???^?j?\\?L??/?}?Y?[??V??t~?w?n??a???m?O?(.?n;??ji:??W?ZnQ[9?n=?^??sE9??;?.??u3\"???<?L??y8?<H???g??u??\\?q???71p?U??}???f`?Y??m3b*C?t{?SX??7m<??6??8K??[Qs??&_??(M??:?Z???W?????W? ??4d??4?A????lw?e?d?>? ?pCV??h?SS?Z?T??4?N?,?? ?8=-?%???4?p?a??~??R?L??=J??j}??"??,?(?x?????????o?ï??t??X7???~jQ?aK???Z*YL????X??/?m?ot?9&s0???O5??j=?7sb?l?Mh???y?}Q\\4?MM?i5&?Yf??hS??N????\'?\0?????i?9??G?$??R?A1[??Y?t??4b?}????u??3?Y??Il????{??[u??f??q???Z_;??|*?t?uTO??}b?a?0>????>?>w\'P?E??]????6???v?^?,?;?uE?f?;?> yo?eNS@?C???I??????Otf????4I??? ?s????*??G?\'?>?</?=T?CE??5NR?~??%?1?d^V??O??????????e||/b??^ \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0~????+?W8??t????????}????????X?????7??/???\\}LM?????b?#?q];J??[U???(0N??t?????[??_V?!??%????-?7:?m???9??Dau?o]??^????*??,???h?o3f??[%?FW?W!?X#; ?>HC?-?\'/??^??\'?*?)??!?_?e?+TC?7O??I.?[?tN?,??Rs???u???^???????q??S??.?c?UR?????? ????M????FS???A????>?^K?|[?]z~7??7u???7V]L?|??l???]?[e?+u?????{U}???Em??IWbV7????/v?x?zk??F@.??5?G?Í>f??_???Gg?}??tc??&R???n???G-?N]/?w?? ????f?}Ue%?;?~?:????`6(??_???g???`? E~?p06?}#/?G=????;??<$Y???l??m?T??@Y??p?????r??.?H?>\0.Ih??~???!?N/^o? ??&v??R???9?suJ?r???JZg?z?Y?7??^?J??H>{[?vQ????qw?e{{?l????????u]?.Z?xh%7??>?|???b`?K?|I\"?nh?m?????m?z5Qpw??N3???y?)??k??????,?Ws*SJ]????????!?o?Iq3~x??Az{?v]\'?k????k???Dc ?]??l?)L??? I8eG#r?dC??;??/C???l???rm???????e?6?M??fP?4?r??)?!?\\s???{??!cN??h??>?? ??o>??m?dO=&<??P??]=]???n?v??y?l??\"?K??????rF?I???)Z??]n?J??N?w???S/S??w???R6}\'u??kN?K`?C/???N??,??o??I?>?S?(??hOV????-]?p?r??0??u?(?,a????/???\"o;???44????P?9K!O]??x?r?}??8?????w?4?|?el7U??l.}|w?- ?=?Lq??e<&??g?/z8??7??:n?????ï??~??_?a???&?7sy???,?3?1??rV???m?????s??C?x50?????g???\\??!??????e?????/Cl?Y???:??jz3??????/?a?]}??\\n???BZ?0?J-+u??????x?=??CC??M??W[??v<???S14?????\\C?Z ??g???q:?u?C?k?vc?K?;??\"Y?t?r]??G?z????w???r??????0??????e?:??/f?*^?W?Q8WsN??9}*?|??~x)?N?=6J?l????M?b??????M45?C?k]??r?u??????r ] Can someone help that how to download file or I am doing something wrong with uploading process. setOrganizationProfile() and getOrganizationProfile() function are created by me which are working fine while storing/getting data to/from database. Thanks

    Read the article

  • Generate a controller with all the RESTful functions

    - by Barb
    Hello, I am trying to generate a controller with all the RESTful actions stubbed. I had read at link text that all I needed to do was to use call the generator with just a controller name I would get just that. So, I ran "script/generate rspec_controller Properties" and I got an empty controller. Any other suggestions would be greatly appreciated.

    Read the article

  • Guidelines for calling controller methods in helper modules?

    - by keruilin
    Few questions: Is it possible to call a controller method in a helper module (e.g., application helper)? If so, how does the helper handle the rendering of views? Ignore it? In what instances would you want to call a controller method from a helper? Is it bad practice? Do you have any sample code where you're calling controller methods in helper?

    Read the article

  • Using ControllerClassNameHandlerMapping with @Controller and extending AbstractController

    - by whiskerz
    Hey there, actually I thought I was trying something really simple. ControllerClassNameHandlerMapping sounded great to produce a small spring webapp using a very lean configuration. Just annotate the Controller with @Controller, have it extend AbstractController and the configuration shouldn't need more than this <context:component-scan base-package="test.mypackage.controller" /> <bean id="urlMapping" class="org.springframework.web.servlet.mvc.support.ControllerClassNameHandlerMapping" /> to resolve my requests and map them to my controllers. I've mapped the servlet to "*.spring", and calling <approot>/hello.spring All I ever get is an error stating that no mapping was found. If however I extend the MultiActionController, and do something like <approot>/hello/hello.spring it works. Which somehow irritates me, as I would have thought that if that is working, why didn't my first try? Does anyone have any idea? The two controllers I used looked like this @Controller public class HelloController extends AbstractController { @Override protected ModelAndView handleRequestInternal(HttpServletRequest request, HttpServletResponse response) throws Exception { ModelAndView modelAndView = new ModelAndView("hello"); modelAndView.addObject("message", "Hello World!"); return modelAndView; } } and @Controller public class HelloController extends MultiActionController { public ModelAndView hello(HttpServletRequest request, HttpServletResponse response) throws Exception { ModelAndView modelAndView = new ModelAndView("hello"); modelAndView.addObject("message", "Hello World!"); return modelAndView; } }

    Read the article

  • how to pass Html.TextBox to controller?

    - by sam26092004
    May be this simple. But, I've hard time figuring it out. I've a controller with different actions that calls the DB code and return result. I want to pass the value of text box to different actions in controller. How to do it? I know that, I can pass values by using form. But, I don't to know how to call different actions in controller from single view.

    Read the article

  • JMF microphone volume controller

    - by TacB0sS
    How to obtain the Microphone volume controller in JMF? this is what I have: I tried this implementation concept of yours, but I keep getting a null from the first volume processor when I try to get the stream, here is how I do it: // the device is the media device specifically audio Processor processorForVolume = Manager.createProcessor(device.getLocator()); // wait until configured ProcessorStates newState = new ProcessorStateListener(Processor.Configured).waitForProcessorState(processorForVolume); System.out.println("volumeProcessorState: "+newState); // setting the content descriptor to null - read in another thread this allows to get the gain control processorForVolume.setContentDescriptor(null); // set the track control format to one supported by the device and the track control. // I didn't match it to an RTP allowed format, but I don't think this has anything to do with it... TrackControl[] trackControls = processorForVolume.getTrackControls(); if (trackControls.length == 0) throw new MC_Exception("No track controls where found for this device:", new Object[]{device}); for (TrackControl control : trackControls) trackManipulator.manipulateTrackControls(control); // wait until the processor is realized newState = new ProcessorStateListener(Controller.Realized).waitForProcessorState(processorForVolume); System.out.println("volumeProcessorState: "+newState); // receives the gain control micVolumeController = processorForVolume.getGainControl(); // cannot get the output stream to process further... any suggestions? processor = Manager.createProcessor(processorForVolume.getDataOutput()); new ProcessorStateListener(Processor.Configured).waitForProcessorState(processor); processor.setContentDescriptor(DeviceCapturingManager.RAW_RTP); new ProcessorStateListener(Controller.Realized).waitForProcessorState(processor); this is the output It generates: volumeProcessorState: Configured format set to track control - com.sun.media.ProcessEngine$ProcTControl@1627c16: LINEAR, 48000.0 Hz, 16-bit, Stereo, LittleEndian, Signed volumeProcessorState: Realized and the data output from the processor is Null. I should make clear that when the content descriptor != null I do get an output stream but not the volume controller, and the when it is null I get the controller, but no stream. I try to connect to an audio microphone device Adam.

    Read the article

  • Overriding properties of child view controller vs setting them via parent view controller

    - by robinjam
    If you want to modify the default behaviour of a View Controller by changing the value of one of its properties, is it considered better form to instantiate the class and set its property directly, or subclass it and override the property? With the former it would become the parent View Controller's responsibility to configure its children, whereas with the latter the children would effectively configure themselves. EDIT: Some more information: The class I am referring to is FetchedTableViewController, a subclass of UITableViewController that I made to display the results of a Core Data fetch operation. There are two places I want to display the results of a fetch, and they each have different fetch requests. I'm trying to decide whether it's better to create a subclass for each one, and override the fetchRequest property, or make it the responsibility of the parent controller to set the fetchRequest property for its children.

    Read the article

  • Magento: Why do controller action predispatch events not fire if the controller is rewritten?

    - by mattalexx
    Why do controller action predispatch events not fire if the controller is rewritten? Here is a snippet of store/app/code/core/Mage/Core/Controller/Varien/Action.php: abstract class Mage_Core_Controller_Varien_Action { // [...] public function preDispatch() { // [...] if ($this->_rewrite()) { return; // [What is the purpose if this?] } // [...] // [This is where my event needs to be firing, but this code never gets // executed because the controller is rewritten] Mage::dispatchEvent( 'controller_action_predispatch_'.$this->getFullActionName(), array('controller_action'=>$this) ); } // [...] } I don't know where to start fixing this problem. Anyone out there ever dealt with this before?

    Read the article

  • ZF-Autoloader not working in UnitTests on Ubuntu

    - by Sam
    i got a problem regarding Unit-testing a Zend-Framework application under Ubuntu 12.04. The project-structure is a default zend application whereas the models are defined as the following ./application ./models ./DbTable ./ProjectStatus.php (Application_Model_DbTable_ProjectStatus) ./Mappers ./ProjectStatus.php (Application_Model_Mapper_ProjectStatus) ./ProjectStatus.php (Application_Model_ProjectStatus) The Problem here is with the Zend-specific autoloading. The naming convention here appears that the folder Mappers loads all classes with _Mapper but not _Mappers. This is some internal Zend behavior which is fine so far. On my windows machine the phpunit runs without any Problems, trying to initiate all those classes. On my Ubuntu machine however with jenkins running on it, phpunit fails to find the appropriate classes giving me the following error Fatal error: Class 'Application_Model_Mapper_ProjectStatus' not found in /var/lib/jenkins/jobs/PAM/workspace/tests/application/models/Mapper/ProjectStatusTest.php on line 39 The error appears to really be that the Zend-Autoloader doesn't load from the ubuntu machine, but i can't figure out how or why this works. The question remains of why this is. I think i've double checked every point of contact with the zend autoloading stuff, but i just can't figure this out. I'll paste the - from my point of view relevant snippets - and hope someone of you has any insight to this. Jenkins Snippet for PHPUnit <target name="phpunit" description="Run unit tests with PHPUnit"> <exec executable="phpunit" failonerror="true"> <arg line="--configuration '${basedir}/tests/phpunit.xml' --coverage-clover '${basedir}/build/logs/clover.xml' --coverage-html '${basedir}/build/coverage/.' --log-junit '${basedir}/build/logs/junit.xml'" /> </exec> </target> ./tests/phpunit.xml <phpunit bootstrap="./bootstrap.php"> ... this shouldn't be of relevance ... </phpunit> ./tests/bootstrap.php <?php // Define path to application directory defined('APPLICATION_PATH') || define('APPLICATION_PATH', realpath(dirname(__FILE__) . '/../application')); // Define application environment defined('APPLICATION_ENV') || define('APPLICATION_ENV', (getenv('APPLICATION_ENV') ? getenv('APPLICATION_ENV') : 'testing')); // Ensure library/ is on include_path set_include_path(implode(PATH_SEPARATOR, array( realpath(APPLICATION_PATH . '/../library'), get_include_path(), ))); require_once 'Zend/Loader/Autoloader.php'; Zend_Loader_Autoloader::getInstance(); Any help will be appreciated.

    Read the article

  • Router slowing my connection?

    - by Roberto
    I have a Linksys WRT54G and I pay for a 12Mbps connection. I've been testing my connection using speedtest.net for many days and always get 8Mbps. I called the support and they told me to bypass the router and test. I did it and got 16Mbps (much more than I pay for), so I thought "this guy just changed my speed so can he blame my router", and he blamed it. But to my surprise, everytime I bypass the router I get 16Mbps and when I use the router I get 8Mbps. Is this guy trolling me somehow (configuring the VOIP-modem-stuff to different profiles depending o the MAC address connecting to it) or is my router a POS? How can I find out? I don't know what's the thing the router connects to, it's a kind of VOIP adapter; the link is this one, but unfortunately I don't think you'll understand because it's in Portuguese. I know they can remotely connect to it, that's the origin of my conspiracy theory :) I just tested wired to the router and got 10Mbps (and still 8Mbps on wifi and 16Mbps without router) O_o I'm 5cm away from my router, so no obstacles to interfere, right? ------ UPDATE ------- It's a WRT54G V8, I'm using firmware v8.00.7 (will install 8.00.8 tomorrow, but I saw that it's only a minor fix to UPnP denial of service security vulnerability). Results: IPerf LAN-LAN: 80Mbps IPerf LAN-WLAN: 19Mbps (therefore we can ignore wireless issues/settings) I wasn't able to make the (W)LAN-WAN NAT-enabled test with IPerf, I get a connection refused error. I'm not sure if did it right: ran in server mode, configured router to forward that port to my IP and tried to connect to my internet IP that got from this site. I don't think there is a way to disable NAT using this firmware. Question: Let's suppose it's an underpowered hardware issue. Is it right to assume that custom firmwares could resolve the issue because they are possibly better implemented and would make better use of the router resources? I couldn't find any references pointing to wired performance improvements with the use of custom firmware.

    Read the article

  • Zend php memory memory_limit

    - by RepDetec
    All, I am working on a Zend Framework based web application. We keep encountering out of memory errors on our dev server: Allowed memory size of XXXX bytes exhausted (tried YYYY... We keep increasing memory_limit in php.ini, but it is now up over 1000 megs. What is a normal memory_limit value? What are the usual suspects in php/Zend for running out of memory? We are using the Propel ORM. Thanks for all of the help! Update I cannot reproduce this error in my windows environment. If I set memory_limit low (say 16M), I get the same error, but the "tried to allocate" amount is always something reasonable. For example: (tried to allocate 13344 bytes) If I set the memory very low on the (Fedora 9) server (such as 16M), I get the same thing. consistent, reasonable out of memory errors. However, even when the memory limit is set very high on our server (128M, for example), maybe once a week, I will get an crazy huge memory error: (tried to allocate 1846026201 bytes). I don't know if that might shed any more light onto what is going on. We are using propel 1.5. It sounds like the actual release is going to come out later this month, but it doesn't look like anyone else is having this problem with it anyway. I don't know that Propel is the problem. We are using Zend Server with php 5.2 on the Linux box, and 5.3 locally. Any more ideas? I have a ticket out to get Xdebug installed on the Linux box. Thanks, -rep

    Read the article

  • Zend XML parsing

    - by Vincent
    I have an xml file called error.xml like this: <?xml version="1.0" encoding="UTF-8"?> <errorList> <error> <code>0</code> <desc>Fault</desc> <ufmessage>Fault</ufmessage> </error> <error> <code>1</code> <desc>Unknown</desc> <ufmessage>Unknown</ufmessage> </error> <error> <code>2</code> <desc>Internal Error</desc> <ufmessage>Internal Error</ufmessage> </error> </errorList> I am using Zend and have the above xml file stored in a Zend Registry variable called "apperrors" like this: $apperrors = new Zend_Config_Xml( 'error.xml'); Zend_Registry::set('apperrors', $apperrors->errorList); If my code throws an error code of 2, I want a snippet of code to check the error code with "code" key in "apperrors" array and echo the ufmessage value corresponding to it. How can I do this? Ex: //Error thrown by the code. Hardcoded for now... $errorThrownByCode = 2; //Get the Zend Registry value for all errors $errorList = Zend_Registry::get('apperrors'); //Write some code to compare $errorThrownByCode with $errorList->error->code //If found echo $errorList->error->ufmessage, else echo "An Unknown error occured"; Thanks

    Read the article

  • PHP / Zend custom date input formats

    - by mld
    Hi, I'm creating a library component for other developers on my team using PHP and Zend. This component needs to be able to take as input a date (string) and another string telling it the format of that date. Looking through the Zend documentation and examples, I thought I found the solution - $dateObject = Zend_Date('13.04.2006', array('date_format' => 'dd.MM.yyyy')); this line, however, throws an error - call to undefined function. So instead I tried this - $dt = Zend_Locale_Format::getDate('13.04.2006', array('date_format' => 'dd.MM.yyyy')); This gets the job done, but throws an error if a date that is entered isn't valid. The docs make it look like you can use the isDate() function to check validity - Zend_Date::isDate('13.04.2006', array('date_format' => 'dd.MM.yyyy')) but this line always returns false. So my questions - Am I going about this the right way? If not, is there a better way to handle this via Zend or straight PHP? If I do use Zend_Locale_Format::getDate(), do I need to worry about a locale being set elsewhere and changing the results of the call? I'm locked into PHP 5.2.6 on windows, btw... so 5.3+ functions & strptime() are out.

    Read the article

  • Why is Windows 7 announcing itself as an IPv6 router?

    - by Paul
    I have a 6in4 ipv6 connection from a linux box to a broker. I use gogoc to establish the connection to the broker, and radvd to advertise the route to clients on the network. All this appears to work, the problem is that I have a Windows 7 machine on the same network, and it is advertising itself as a ipv6 router. Which it is not. This is output from radvdump: # # radvd configuration generated by radvdump 1.8.5 # based on Router Advertisement from [snip]:ea2 # received by interface eth0 # interface eth0 { AdvSendAdvert on; # Note: {Min,Max}RtrAdvInterval cannot be obtained with radvdump AdvManagedFlag on; AdvOtherConfigFlag on; AdvReachableTime 0; AdvRetransTimer 0; AdvCurHopLimit 0; AdvDefaultLifetime 1800; AdvHomeAgentFlag off; AdvDefaultPreference medium; AdvSourceLLAddress on; AdvLinkMTU 1500; }; # End of interface definition # # radvd configuration generated by radvdump 1.8.5 # based on Router Advertisement from [snip]:1121 # received by interface eth0 # interface eth0 { AdvSendAdvert on; # Note: {Min,Max}RtrAdvInterval cannot be obtained with radvdump AdvManagedFlag off; AdvOtherConfigFlag off; AdvReachableTime 0; AdvRetransTimer 0; AdvCurHopLimit 64; AdvDefaultLifetime 1800; AdvHomeAgentFlag off; AdvDefaultPreference medium; AdvLinkMTU 1280; AdvSourceLLAddress on; prefix [snip]::/64 { AdvValidLifetime 86400; AdvPreferredLifetime 14400; AdvOnLink on; AdvAutonomous on; AdvRouterAddr off; }; # End of prefix definition }; # End of interface definition And I end up with two routes: $ ip -6 route [snip]::/64 dev eth0 proto kernel metric 256 expires 86117sec fe80::/64 dev eth0 proto kernel metric 256 default via [snip]:ea2 dev eth0 proto kernel metric 1024 expires 1492sec default via [snip]:1121 dev eth0 proto kernel metric 1024 expires 1506sec The ea2 route is to the Windows7 box. It doesn't have a router installed, and doesn't have any tun/tap interfaces. I can't see why it is doing this. I could disable ipv6 on it, but I want it to be a client, not a router. Update: The IP Helper service (Provides tunnel connectivity using IPv6 transition technologies (6to4, ISATAP, Port Proxy, and Teredo), and IP-HTTPS. If this service is stopped, the computer will not have the enhanced connectivity benefits that these technologies offer.) seems to be the culprit, as if it is stopped, I don't get the routes advertised. So my question is now more specifically "why is IP Helper announcing routes?".

    Read the article

  • trying to setup wireless

    - by JohnMerlino
    I'm trying to set up wireless on vostro 1520 dell laptop, with latest Ubuntu install. Here's the output of some of the commands that I was told to run: lshw -C network viggy@ubuntu:~$ lshw -C network WARNING: you should run this program as super-user. *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:08:00.0 logical name: eth0 version: 03 serial: 00:24:e8:da:84:25 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168d-1.fw ip=192.168.2.6 latency=0 multicast=yes port=MII speed=100Mbit/s resources: irq:47 ioport:3000(size=256) memory:f6004000-f6004fff memory:f6000000-f6003fff memory:f6020000-f603ffff *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0e:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:fa000000-fa003fff *-network DISABLED description: Wireless interface physical id: 1 logical name: wlan0 serial: 0c:60:76:05:ee:74 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.2.0-29-generic firmware=N/A multicast=yes wireless=IEEE 802.11bg lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 0e:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 1a:00.0 FireWire (IEEE 1394): O2 Micro, Inc. Device 10f7 (rev 01) 1a:00.1 SD Host controller: O2 Micro, Inc. Device 8120 (rev 01) 1a:00.2 Mass storage controller: O2 Micro, Inc. Device 8130 (rev 01) iwconfig lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on eth0 no wireless extensions. At this point in time, I don't have wireless.

    Read the article

  • What router hardware or software should be used when multiple public IPs are routed into the same LAN?

    - by lcbrevard
    I am looking for recommendations to replace a set of consumer grade (Linksys, Netgear, Belkin) routers with something that can handle more traffic while routing more than one static public IP into the same LAN address space. We have a block of static public IPs, 5 usable, with Comcast Business. Currently four of them are in use for: General office access Web server Mail and DNS servers Download and backup web server for separate business All systems (a mixture of physical and virtual) are in the same LAN address space (10.x.y.0/24) to enable easy access between them inside the office. There are 30 or more systems in use depending on which virtual machines are currently active. We have a mixture of Windows, Linux, FreeBSD, and Solaris. Currently a separate consumer grade router is used for each of the four static addresses, with its WAN address set to the specific static address and a different gateway address for each: uses 10.x.y.1 - various ports are forwarded to various LAN IPs on systems with gateway 10.x.y.1 uses 10.x.y.254 - port 80 is forwarded to a server with gateway 10.x.y.254 uses 10.x.y.253 - ports for mail and dns are forwarded to a server with gateway 10.x.y.253 uses 10.x.y.252 - ports as needed are forwarded to server with gateway 10.x.y.252 Only router 1. is allowed to serve DHCP and address reservation based on the MAC is used for most of the internal "server" IP addresses so they are at fixed values. [Some are set static due to limitations in the address reservation capabilities of router 1.] And, yes, this really does work! But... I am looking for: better DHCP with more capable address reservation higher capacity so I don't have to periodically power cycle the routers One obvious improvement would be to have a real DHCP server and not use a consumer grade router for that purpose. I am torn between buying a "professional" router such as Cisco or Juniper or Sonic Wall verus learning to configure some spare hardware to perform this function. The price goes up extremely rapidly with capabilities for commercial routers! Worse, some routers require licensing based on the number of clients - a disaster in our environment with so many virtual machines. Sorry for such a long posting but I am getting tired of having to power cycle routers and deal with shifting IP addresses afterwards!

    Read the article

  • Server error 500: Undefinable problem with my Zend Framework based site

    - by sanders
    Hello everyone, Lately I had to reinstall my development site on my ubuntu machine since my system crashed after an os update. 4 days later my site is still not running as it should. Whenever i do an action which has in it an action on a database, it stops working. For example when Registring a new user, i get the following error: [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP Notice: Trying to get property of non-object in /var/www/nrka2/application/bootstrap/Bootstrap.php on line 169, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP Stack trace:, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 1. {main}() /var/www/nrka2/public/index.php:0, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 2. require() /var/www/nrka2/public/index.php:2, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 3. Zend_Application->bootstrap() /var/www/nrka2/application/application.php:23, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 4. Zend_Application_Bootstrap_BootstrapAbstract->bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application.php:355, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 5. Zend_Application_Bootstrap_BootstrapAbstract->_bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:583, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 6. Zend_Application_Bootstrap_BootstrapAbstract->_executeResource() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:619, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 7. Bootstrap->_initViewSettings() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:666, referer: http://nrka2/user/register [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP Notice: Trying to get property of non-object in /var/www/nrka2/application/bootstrap/Bootstrap.php on line 169, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP Stack trace:, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 1. {main}() /var/www/nrka2/public/index.php:0, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 2. require() /var/www/nrka2/public/index.php:2, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 3. Zend_Application->bootstrap() /var/www/nrka2/application/application.php:23, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 4. Zend_Application_Bootstrap_BootstrapAbstract->bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application.php:355, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 5. Zend_Application_Bootstrap_BootstrapAbstract->_bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:583, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 6. Zend_Application_Bootstrap_BootstrapAbstract->_executeResource() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:619, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 7. Bootstrap->_initViewSettings() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:666, referer: http://nrka2/css/main.css My Bootstrap class looks like this: <?php class Bootstrap extends Zend_Application_Bootstrap_Bootstrap{ /** * * @var unknown_type */ public $frontcontroller; /** * * @var unknown_type */ protected $_logger; /** * * @var unknown_type */ protected $_acl; /** * * @var unknown_type */ protected $_auth; /** * Setup the logging */ protected function _initLogging() { $this->bootstrap('frontController'); $logger = new Zend_Log(); $writer = 'production' == $this->getEnvironment() ? new Zend_Log_Writer_Stream(APPLICATION_PATH . '/../data/logs/app.log') : new Zend_Log_Writer_Firebug(); $logger->addWriter($writer); if ('production' == $this->getEnvironment()) { $filter = new Zend_Log_Filter_Priority(Zend_Log::CRIT); $logger->addFilter($filter); } $this->_logger = $logger; Zend_Registry::set('log', $logger); } protected function _initDefaultModuleAutoloader(){ $this->_logger->info('Bootstrap '. __METHOD__); $this->_resourceLoader = new Zend_Application_Module_Autoloader(array( 'namespace' => 'EventManager', 'basePath' => APPLICATION_PATH . '/modules/eventManager', )); $this->_resourceLoader->addResourceTypes(array( 'modelResource' => array( 'path' => 'models/resources', 'namespace' => 'Resource', ), 'service' => array( 'path' => 'services', 'namespace' => 'Service' ), )); } // @todo develop this function protected function _initDbProfiler(){ $this->_logger->info('Bootstrap ' . __METHOD__); if ('production' !== $this->getEnvironment()) { $this->bootstrap('db'); $profiler = new Zend_Db_Profiler_Firebug('All DB Queries'); $profiler->setEnabled(true); $this->getPluginResource('db')->getDbAdapter()->setProfiler($profiler); } } /** * Add Controller Action Helpers */ protected function _initActionHelpers() { $this->_logger->info('Bootstrap ' . __METHOD__); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_Acl()); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_RedirectCommon()); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_Service()); } /** * * @return unknown_type */ protected function _initRoutes(){ $this->_logger->info('Initialize Routes '. __METHOD__); $this->bootstrap('frontController'); $router = $this->frontController->getRouter(); $route = new Zend_Controller_Router_route( 'register', array( 'controller' => 'user', 'action' => 'register' ) ); $router->addRoute('register',$route); $route = new Zend_Controller_Router_route( 'login', array( 'controller' => 'user', 'action' => 'login' ) ); $router->addRoute('login',$route); $route = new Zend_Controller_Router_route( 'logout', array( 'controller' => 'user', 'action' => 'logout' ) ); $router->addRoute('logout',$route); } /** * * @return void */ protected function _initLocale(){ $this->_logger->info('Bootstrap '.__METHOD__); $locale = new Zend_Locale('nl_NL'); Zend_Registry::set('Zend_Locale', $locale); } protected function _initAcl(){ $this->_acl = new EventManager_Service_Acl(); } /** * * @return void */ protected function _initViewSettings(){ $this->_logger->info('Bootstrap '.__METHOD__); $this->bootstrap('view'); $this->bootstrap('Acl'); $this->_view = $this->getResource('view'); //set encoding and doctype $this->_view->setEncoding('UTF-8'); $this->_view->doctype('XHTML1_STRICT'); $this->_view->headMeta()->appendHttpEquiv('Content-Type', 'text/html; charset=UTF-8'); $this->_view->headMeta()->appendHttpEquiv('Content-Language', 'en-US'); //@todo op een later moment moeten hier nog de stylesheets worden toegevoegd $this->_view->headLink()->appendStylesheet('/css/main.css'); //$this->_view->headTitle('Event Manager'); /* Set the head style. $this->_view->headTitle->headStyle(); */ $this->_view->headTitle()->setSeparator(' - '); $this->_auth = Zend_Auth::getInstance(); $navigation = new Zend_Config_Xml(APPLICATION_PATH.'/configs/navigation.xml','nav'); $navContainer = new Zend_Navigation($navigation); $this->_view->navigation($navContainer)->setAcl($this->_acl)->setRole($this->_auth->getStorage()->read()->usr_role); //THIS IS LINE 169!!!!!!!!! } /** * Add graceful error handling to the dispatch, this will handle * errors during Front Controller dispatch. */ public function run() { $errorHandling = $this->getOption('errorhandling'); try { parent::run(); } catch(Exception $e) { if (true == (bool) $errorHandling['graceful']) { $this->__handleErrors($e, $errorHandling['email']); } else { throw $e; } } } /** * Handle errors gracefully, this will work as long as the views, * and the Zend classes are available * * @param Exception $e * @param string $email */ protected function __handleErrors(Exception $e, $email) { header('HTTP/1.1 500 Internal Server Error'); $view = new Zend_View(); $view->addScriptPath(dirname(__FILE__) . '/../views/scripts'); echo $view->render('fatalError.phtml'); if ('' != $email) { $mail = new Zend_Mail(); $mail->setSubject('Fatal error in application Storefront'); $mail->addTo($email); $mail->setBodyText( $e->getFile() . "\n" . $e->getMessage() . "\n" . $e->getTraceAsString() . "\n" ); @$mail->send(); } } } I have tried to debug my code, but everyting goes well until I do somethign with the db. But I don't know what goes wrong with the db. I don't get any clear error messages. Can someone help me? Some more possible interesting data: [bootstrap] resources.db.adapter = "PDO_MYSQL" resources.db.isdefaulttableadapter = true resources.db.params.dbname = "ladosa" resources.db.params.username = "root" resources.db.params.password = "root" resources.db.params.hostname = "localhost" resources.db.params.charset = "UTF8" resources.db.params.profiler.enabled = true resources.db.params.profiler.class = Zend_Db_Profiler_Firebug Autoloadernamespaces[] = "Zend_" Autoloadernamespaces[] = "SF_" phpsettings.display_errors = 0 phpsettings.error_reporting = 8191 phpSettings.date.timezone = "Europe/Amsterdam" bootstrap.path = APPLICATION_PATH"/bootstrap/Bootstrap.php" pluginPaths.resource_ = APPLICATION_PATH"/resources" resources.frontcontroller.moduledirectory = APPLICATION_PATH"/modules" resources.frontcontroller.defaultmodule = "eventManager" resources.frontcontroller.params.prefixDefaultModule = true resources.frontcontroller.exceptions = false resources.view[] = "" resources.layout.layoutPath = APPLICATION_PATH "/layouts/scripts" resources.view.encoding = "UTF-8" resources.view.title = Rode kruis Vrijwilligers applicatie ;resources.view.helperPath.Default_View_Helper = APPLICATION_PATH "/modules/eventManager/views/helpers" resources.layout.layout = "main" [production:bootstrap] [development:bootstrap] ;resources.frontController.throwExceptions = 1 ;phpSettings.display_startup_errors=1 ;phpSettings.display_errors = 1 ;resources.frontcontroller.throwerrors = [test:production] btw. I CAN login to my database command line with the given username and password. Update: today i decided to investigate on my http request and i came to an error 500. My apache logs don't give any related information, I think. I posted the logs above. Any idea's?

    Read the article

  • Server error 500: Undefinable problem with my Zend Framework based site

    - by sanders
    Lately I had to reinstall my development site on my ubuntu machine since my system crashed after an os update. 4 days later my site is still not running as it should. Whenever i do an action which has in it an action on a database, it stops working. For example when Registring a new user, i get the following error: [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP Notice: Trying to get property of non-object in /var/www/nrka2/application/bootstrap/Bootstrap.php on line 169, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP Stack trace:, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 1. {main}() /var/www/nrka2/public/index.php:0, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 2. require() /var/www/nrka2/public/index.php:2, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 3. Zend_Application->bootstrap() /var/www/nrka2/application/application.php:23, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 4. Zend_Application_Bootstrap_BootstrapAbstract->bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application.php:355, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 5. Zend_Application_Bootstrap_BootstrapAbstract->_bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:583, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 6. Zend_Application_Bootstrap_BootstrapAbstract->_executeResource() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:619, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 7. Bootstrap->_initViewSettings() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:666, referer: http://nrka2/user/register [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP Notice: Trying to get property of non-object in /var/www/nrka2/application/bootstrap/Bootstrap.php on line 169, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP Stack trace:, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 1. {main}() /var/www/nrka2/public/index.php:0, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 2. require() /var/www/nrka2/public/index.php:2, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 3. Zend_Application->bootstrap() /var/www/nrka2/application/application.php:23, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 4. Zend_Application_Bootstrap_BootstrapAbstract->bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application.php:355, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 5. Zend_Application_Bootstrap_BootstrapAbstract->_bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:583, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 6. Zend_Application_Bootstrap_BootstrapAbstract->_executeResource() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:619, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 7. Bootstrap->_initViewSettings() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:666, referer: http://nrka2/css/main.css My Bootstrap class looks like this: <?php class Bootstrap extends Zend_Application_Bootstrap_Bootstrap{ /** * * @var unknown_type */ public $frontcontroller; /** * * @var unknown_type */ protected $_logger; /** * * @var unknown_type */ protected $_acl; /** * * @var unknown_type */ protected $_auth; /** * Setup the logging */ protected function _initLogging() { $this->bootstrap('frontController'); $logger = new Zend_Log(); $writer = 'production' == $this->getEnvironment() ? new Zend_Log_Writer_Stream(APPLICATION_PATH . '/../data/logs/app.log') : new Zend_Log_Writer_Firebug(); $logger->addWriter($writer); if ('production' == $this->getEnvironment()) { $filter = new Zend_Log_Filter_Priority(Zend_Log::CRIT); $logger->addFilter($filter); } $this->_logger = $logger; Zend_Registry::set('log', $logger); } protected function _initDefaultModuleAutoloader(){ $this->_logger->info('Bootstrap '. __METHOD__); $this->_resourceLoader = new Zend_Application_Module_Autoloader(array( 'namespace' => 'EventManager', 'basePath' => APPLICATION_PATH . '/modules/eventManager', )); $this->_resourceLoader->addResourceTypes(array( 'modelResource' => array( 'path' => 'models/resources', 'namespace' => 'Resource', ), 'service' => array( 'path' => 'services', 'namespace' => 'Service' ), )); } // @todo develop this function protected function _initDbProfiler(){ $this->_logger->info('Bootstrap ' . __METHOD__); if ('production' !== $this->getEnvironment()) { $this->bootstrap('db'); $profiler = new Zend_Db_Profiler_Firebug('All DB Queries'); $profiler->setEnabled(true); $this->getPluginResource('db')->getDbAdapter()->setProfiler($profiler); } } /** * Add Controller Action Helpers */ protected function _initActionHelpers() { $this->_logger->info('Bootstrap ' . __METHOD__); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_Acl()); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_RedirectCommon()); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_Service()); } /** * * @return unknown_type */ protected function _initRoutes(){ $this->_logger->info('Initialize Routes '. __METHOD__); $this->bootstrap('frontController'); $router = $this->frontController->getRouter(); $route = new Zend_Controller_Router_route( 'register', array( 'controller' => 'user', 'action' => 'register' ) ); $router->addRoute('register',$route); $route = new Zend_Controller_Router_route( 'login', array( 'controller' => 'user', 'action' => 'login' ) ); $router->addRoute('login',$route); $route = new Zend_Controller_Router_route( 'logout', array( 'controller' => 'user', 'action' => 'logout' ) ); $router->addRoute('logout',$route); } /** * * @return void */ protected function _initLocale(){ $this->_logger->info('Bootstrap '.__METHOD__); $locale = new Zend_Locale('nl_NL'); Zend_Registry::set('Zend_Locale', $locale); } protected function _initAcl(){ $this->_acl = new EventManager_Service_Acl(); } /** * * @return void */ protected function _initViewSettings(){ $this->_logger->info('Bootstrap '.__METHOD__); $this->bootstrap('view'); $this->bootstrap('Acl'); $this->_view = $this->getResource('view'); //set encoding and doctype $this->_view->setEncoding('UTF-8'); $this->_view->doctype('XHTML1_STRICT'); $this->_view->headMeta()->appendHttpEquiv('Content-Type', 'text/html; charset=UTF-8'); $this->_view->headMeta()->appendHttpEquiv('Content-Language', 'en-US'); //@todo op een later moment moeten hier nog de stylesheets worden toegevoegd $this->_view->headLink()->appendStylesheet('/css/main.css'); //$this->_view->headTitle('Event Manager'); /* Set the head style. $this->_view->headTitle->headStyle(); */ $this->_view->headTitle()->setSeparator(' - '); $this->_auth = Zend_Auth::getInstance(); $navigation = new Zend_Config_Xml(APPLICATION_PATH.'/configs/navigation.xml','nav'); $navContainer = new Zend_Navigation($navigation); $this->_view->navigation($navContainer)->setAcl($this->_acl)->setRole($this->_auth->getStorage()->read()->usr_role); //THIS IS LINE 169!!!!!!!!! } /** * Add graceful error handling to the dispatch, this will handle * errors during Front Controller dispatch. */ public function run() { $errorHandling = $this->getOption('errorhandling'); try { parent::run(); } catch(Exception $e) { if (true == (bool) $errorHandling['graceful']) { $this->__handleErrors($e, $errorHandling['email']); } else { throw $e; } } } /** * Handle errors gracefully, this will work as long as the views, * and the Zend classes are available * * @param Exception $e * @param string $email */ protected function __handleErrors(Exception $e, $email) { header('HTTP/1.1 500 Internal Server Error'); $view = new Zend_View(); $view->addScriptPath(dirname(__FILE__) . '/../views/scripts'); echo $view->render('fatalError.phtml'); if ('' != $email) { $mail = new Zend_Mail(); $mail->setSubject('Fatal error in application Storefront'); $mail->addTo($email); $mail->setBodyText( $e->getFile() . "\n" . $e->getMessage() . "\n" . $e->getTraceAsString() . "\n" ); @$mail->send(); } } } I have tried to debug my code, but everyting goes well until I do somethign with the db. But I don't know what goes wrong with the db. I don't get any clear error messages. Can someone help me? Some more possible interesting data: [bootstrap] resources.db.adapter = "PDO_MYSQL" resources.db.isdefaulttableadapter = true resources.db.params.dbname = "ladosa" resources.db.params.username = "root" resources.db.params.password = "root" resources.db.params.hostname = "localhost" resources.db.params.charset = "UTF8" resources.db.params.profiler.enabled = true resources.db.params.profiler.class = Zend_Db_Profiler_Firebug Autoloadernamespaces[] = "Zend_" Autoloadernamespaces[] = "SF_" phpsettings.display_errors = 0 phpsettings.error_reporting = 8191 phpSettings.date.timezone = "Europe/Amsterdam" bootstrap.path = APPLICATION_PATH"/bootstrap/Bootstrap.php" pluginPaths.resource_ = APPLICATION_PATH"/resources" resources.frontcontroller.moduledirectory = APPLICATION_PATH"/modules" resources.frontcontroller.defaultmodule = "eventManager" resources.frontcontroller.params.prefixDefaultModule = true resources.frontcontroller.exceptions = false resources.view[] = "" resources.layout.layoutPath = APPLICATION_PATH "/layouts/scripts" resources.view.encoding = "UTF-8" resources.view.title = Rode kruis Vrijwilligers applicatie ;resources.view.helperPath.Default_View_Helper = APPLICATION_PATH "/modules/eventManager/views/helpers" resources.layout.layout = "main" [production:bootstrap] [development:bootstrap] ;resources.frontController.throwExceptions = 1 ;phpSettings.display_startup_errors=1 ;phpSettings.display_errors = 1 ;resources.frontcontroller.throwerrors = [test:production] btw. I CAN login to my database command line with the given username and password. Update: today i decided to investigate on my http request and i came to an error 500. My apache logs don't give any related information, I think. I posted the logs above. Any idea's?

    Read the article

  • Why Wifi no longer works 12.04.1

    - by Roger
    starting this morning over wifi (Realtek RTL8188CE) on CLEVO W253HU. May be due to the update before yesterday, more pilot managed, but somehow it worked yesterday. If someone has an idea of the problem. Back command lines: cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS" lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 006: ID 192f:0416 Avago Technologies, Pte. Bus 002 Device 004: ID 5986:0315 Acer, Inc lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) lspci -nn | grep -i net 02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) 03:00.0 Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250] (rev 05) lspci -k 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: i2c-i801 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) Subsystem: Realtek Semiconductor Co., Ltd. Device 9196 Kernel modules: rtl8192ce 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jme Kernel modules: jme 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: sdhci-pci 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jmb38x_ms Kernel modules: jmb38x_ms sudo lshw -C network *-network NON-RÉCLAMÉ description: Network controller produit: RTL8188CE 802.11b/g/n WiFi Adapter fabriquant: Realtek Semiconductor Co., Ltd. identifiant matériel: 0 information bus: pci@0000:02:00.0 version: 01 bits: 64 bits horloge: 33MHz fonctionnalités: pm msi pciexpress cap_list configuration: latency=0 ressources: portE/S:e000(taille=256) mémoire:f7d00000-f7d03fff *-network description: Ethernet interface produit: JMC250 PCI Express Gigabit Ethernet Controller fabriquant: JMicron Technology Corp. identifiant matériel: 0 information bus: pci@0000:03:00.0 nom logique: eth0 version: 05 numéro de série: 00:90:f5:c1:c6:45 taille: 100Mbit/s capacité: 1Gbit/s bits: 32 bits horloge: 33MHz fonctionnalités: pm pciexpress msix msi bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=jme driverversion=1.0.8 duplex=full ip=192.168.1.54 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s ressources: irq:44 mémoire:f7c20000-f7c23fff portE/S:d100(taille=128) portE/S:d000(taille=256) mémoire:f7c10000-f7c1ffff mémoire:f7c00000-f7c0ffff lsmod Module Size Used by btusb 18288 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 11 btusb,rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 binfmt_misc 17540 1 snd_hda_codec_realtek 224173 0 dm_crypt 23125 0 snd_hda_codec_hdmi 32474 0 uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev snd_hda_intel 33773 2 snd_hda_codec 127706 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi jmb38x_ms 17646 0 psmouse 87692 0 serio_raw 13211 0 memstick 16569 1 jmb38x_ms snd_seq_midi_event 14899 1 snd_seq_midi rtl8192ce 84826 0 rtl8192c_common 75767 1 rtl8192ce rtlwifi 111202 1 rtl8192ce snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq mac80211 506816 3 rtl8192ce,rtl8192c_common,rtlwifi mac_hid 13253 0 snd 78855 14 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device cfg80211 205544 2 rtlwifi,mac80211 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mei 41616 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp usbhid 47199 0 hid 99559 1 usbhid i915 473035 3 drm_kms_helper 46978 1 i915 drm 242038 4 i915,drm_kms_helper jme 41259 0 i2c_algo_bit 13423 1 i915 sdhci_pci 18826 0 sdhci 33205 1 sdhci_pci wmi 19256 0 video 19596 1 i915 iwconfig lo no wireless extensions. eth0 no wireless extensions. ifconfig eth0 Link encap:Ethernet HWaddr 00:90:f5:c1:c6:45 inet adr:192.168.1.54 Bcast:192.168.1.255 Masque:255.255.255.0 adr inet6: fe80::290:f5ff:fec1:c645/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Packets reçus:4513 erreurs:0 :0 overruns:0 frame:0 TX packets:4359 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 Octets reçus:3471675 (3.4 MB) Octets transmis:712722 (712.7 KB) Interruption:44 lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6: ::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:16436 Metric:1 Packets reçus:686 erreurs:0 :0 overruns:0 frame:0 TX packets:686 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 Octets reçus:64556 (64.5 KB) Octets transmis:64556 (64.5 KB) sudo iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. uname -r -m 3.2.0-30-generic x86_64 cat /etc/network/interfaces auto lo iface lo inet loopback nm-tool NetworkManager Tool State: connected (global) - Device: eth0 [Connexion filaire 1] ------------------------------------------ Type: Wired Driver: jme State: connected Default: yes HW Address: 00:90:F5:C1:C6:45 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.54 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 sudo rfkill listrfkill list 1: hci0: Bluetooth Soft blocked: no Hard blocked: no The absence of line "Kernel driver in use:" the return of lspci-k made ??me think that it is not loaded yet but he seems to be. lsmod | grep rtl8192ce rtl8192ce 137478 0 rtlwifi 118749 1 rtl8192ce mac80211 506816 2 rtl8192ce,rtlwifi I found something disturbing in / var / log / syslog Sep 14 11:40:11 pcroger kernel: [ 64.048783] rtl8192ce-0:rtl92c_init_sw_vars():<0-0> Failed to request firmware! Sep 14 11:40:11 pcroger kernel: [ 64.048795] rtlwifi-0:rtl_pci_probe():<0-0> Can't init_sw_vars. Sep 14 11:40:11 pcroger kernel: [ 64.048835] rtl8192ce 0000:02:00.0: PCI INT A disabled Sep 14 11:40:11 pcroger kernel: [ 64.943345] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6 frozen Sep 14 11:40:11 pcroger kernel: [ 64.943358] ata1.00: failed command: READ FPDMA QUEUED Sep 14 11:40:11 pcroger kernel: [ 64.943371] ata1.00: cmd 60/00:00:00:68:6a/04:00:0b:00:00/40 tag 0 ncq 524288 in Sep 14 11:40:11 pcroger kernel: [ 64.943374] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Sep 14 11:40:11 pcroger kernel: [ 64.943381] ata1.00: status: { DRDY } Ubuntu and takes forever to start (2 min).

    Read the article

< Previous Page | 30 31 32 33 34 35 36 37 38 39 40 41  | Next Page >