Search Results

Search found 11460 results on 459 pages for 'ip failover'.

Page 340/459 | < Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >

• What are good and bad jitter times for a LAN

  - by garyb32234234

  Ive just ran jperf (frontend to iperf) on our network between 2 workstations, its recorded jitter between 0.033ms and 0.048ms. Is this good or bad? Are there more variables that i would need to consider to make the decision? EDIT: TCP/IP Ethernet LAN 43 PCs 1 server, 100Mbits main switch, various small 8 port switches, test was done using UDP, Its a Windows Domain. I want to instal a few voip softphones on the workstations, see how many i can use that reliably work, im testing a few different workstations around the network to see where the best quality network paths are. Will also change some equipment if i identify bad connections.

  Read the article

• Startech SVx41HDI Series Server Remote Control Usage Question - How do I switch away from a dead por

  - by tajh

  We have a Startech KVM over IP model SV841HDI and it was stuck pointing a port where the machine has been removed. We ended up having to physically plug something into that port in order to switch ports again, meaning that if someone in support accidentally switches to an empty port, we need to have a documented solution for making it useable again. The unit is old, no longer under warranty, firmware updates for it are no longer available (interestingly it runs a powerPC version of busybox). Since it does work well except for this one catch, we would like to avoid replacing it. Reading the manual, you have a several recommended methods. I tried them. Hit the left CTRL key a few times (as well as all the other popular KVM keys I could think of). The VNC GUI offers lots of buttons - none of them switch away from a dead port. The question is: how do I switch away from a dead port on this particular KVM remotely?

  Read the article

• Using a Dell PowerConnect to set up load balancing/redundancy, 1 switch 2 routres 2 private wan link

  - by MarianoC

  Hi, We have different locations connected by two different WAN providers. Each site has a dell powerConnect 6224 and two cisco routers with the WAN connections (we don’t have access to router admin). The 6224 connects to each cisco LAN port and to our LAN backbone. We would like the 6224 provide the ip gateway address and load balance and support redundancy, if one of the routes fail. Is this possible?. We can't find any samples on doing this and we have tried with no success. Any help or link to documentation regarding this, will be greatly appreciated. Thanks, MarianoC

  Read the article

• CoovaAP router does not get DHCP settings from modem

  - by Dan Sosedoff

  Im having some serious trouble making CoovaAP-powered router get network settings from modem. Wireless router works in captive portal mode (so it handles user login on the same device). But DNS settings and connection ip (for router) are not set as they supposed to via DHCP on modem. It makes installation in other location really complicated, because you have to go and set everything manually. For now i use google`s dns servers. What`s the way to make router self-configurable via modem's dhcp ?

  Read the article

• NAT for static private addresses

  - by biggdman

  Could someone please help me out with the following scenario: I have a machine that hosts 3 lxc containers, and acts like a router for them. The LXC containers have private ip addresses set on the interfaces that are connected to the host. I want to provide Internet access to the containers and I want to configure the host system so it translates only the addresses that are configured static on the lxc containers interfaces. Should I try to configure the host so it translates each of the 3 private addresses to the public address of the host's interface that is connected to the Internet?

  Read the article

• Is it effective installing firewall within same machine which offering service?

  - by Eonil

  I'm a starting a small service practically. And I have single server currently. No money to purchase separated/dedicated firewall equipment now. Is it effective installing firewall software on same machine which offering internet service? My server will offer HTTP, NFS, and SSH, and custom made server software on a several ports. (edit) All services (except NFS) should be open to internet. Not internal services. I guess my machine (virtualized within Xen) is connected to the internet directly because I can connect to my machine SSH with only IP address. (edit) NFS is not open to internet. Sorry for my mistake. NFS will be served via SSH only.

  Read the article

• Unable to access internet if wireless enabled

  - by balki

  The following is my route output. eth0 is my wired network and eth1 is my wireless network. Only wired one has access to internet. If I enable wireless, I am not able to access internet, it tries to access via eth1 and I get 404 page of the wireless router. Why does eth1 have higher preference though default is eth0 (link)? [balakrishnan@mylap ~]$ route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 10.26.0.1 0.0.0.0 UG 0 0 0 eth0 10.26.0.0 * 255.255.192.0 U 1 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 eth0 192.168.1.0 * 255.255.255.0 U 9 0 0 eth1

  Read the article

• Automatically send a string when opening a raw connection in putty

  - by MBraedley

  I have a program running on a server that accepts TCP/IP connections on a specified port. When a connection is made, this program waits for the user (i.e. me) to send a string which identifies the type of user. Once the user identifies themselves, the program will start sending data that is relevant to that user type. I want to automate the first step and have putty automatically send the user identification string once the connection is made. I've been through the settings, and can't seem to find anything like "send following commands on connection". Any help would be appreciated.

  Read the article

• How can I rewrite a URL and pass on the original URL as a parameter?

  - by Bobby Jack

  I'm building a site that needs to include a 'check' procedure, to do several initiation tasks for a user's session. Examples include checking whether they're accepting cookies, determining if their IP address grants them specific privileges, etc. Once the check is complete, I need to redirect the user back to the page they originally requested. The plan is to use RewriteCond and map all URLs to an 'initiator' if the user doesn't have a specific cookie set. Let's say I want to rewrite all URLs (ultimately, with some conditions, of course) to: /foo?original_url=... Where the ... is the original URL requested, URL-encoded. The closest I've got is this: RewriteRule ^(.*)$ http://localhost/php/cookie.php$1 [R=301] I can then inspect the original URL, captured in the backreference, via PATH_INFO. However, this is pretty messy - I would much prefer to pass that value as a URL parameter

  Read the article

• Apache ProxyPass/ProxyPassReverse to IIS

  - by Dana

  We have an ASP.NET web application which is mapped to a folder on an apache hosted php site using ProxyPass.ProxyPassReverse. A couple of problems being encountered. cookies are being lost which breaks the site navigation, this can be overcome by setting the asp app as cookieless. Forms authentication is used on the ASP site, this is also broken withe the proxypass in place, suspect this is cookie related also. ASP site works ok when run from a domain/ip address. Use of a separate domain / sub-domain is not an option duew to client requirements.

  Read the article

• private subnet nat (openvpn / racoon)

  - by Jonas Schnelli

  I have a openvpn subnet 10.8.0.0/24 running one server and one client (laptop). openvpn works fine. Browsing the web over openvpn from the laptop works also fine. Now on the server there is a private subnet with 10.7.8.128/28. The subnet is set up with racoon (IPSEC s2s vpn). The s2s vpn allows me to access the subnet 10.3.5.0/24 at the other s2s vpn end. Works all fine when I'm connected with ssh to my server. From my laptop i can ping 10.7.8.129 (the servers ipsec local ip) but i cannot reach the net 10.3.5.0/24. I tried to add a static route on my laptop 10.3.5.0/24 over gw 10.7.8.129 with no success. Any ideas how i do setup the nat / routing? Thanks

  Read the article

• Wireless only connects to Google

  - by dmanxiii

  I am using a netgear wireless router to connect to create a wireless network. When connected to the router via an Ethernet cable everything works correctly. When connecting to the router via wireless only Google can be accessed. I've done searches via Google using random words to make sure that it is not a cached page, and these all work. However, trying to connect to any non Google domain the page fails to load. I've accessed the connection with two different laptops, both are running Windows Vista. The network connection is strong on both, but the issue persists for both. Edit: I have configured the wireless networks name and password, and connect to that using the credentials I have defined. I am sure I am not connecting to a neighbors wireless network. Edit2: Typing in the direct IP address for CNN.com ( http://157.166.255.19 ) would not resolve.

  Read the article

• Can only connect to sql server express 2012 via named pipes

  - by YetAnotherDeveloper

  I have sql server express 2012 installed on windows 2008, locally everything works just fine i can connect via tcpip and named pipes. Remotely i can connect with ssms only using named pipes. I have tried disabling the firewall on both sides to eliminate blocking traffic. i have toggled the tcpip setting on and off (i read somewhere that they got it working just but flipping them off and back on). I have double/triple checked all the settings that i'm aware of and everything seems to be correct. Tcp is enabled Tcp port is set to 1433, udp port is set to 1434 Server has static ip Start up log says: Server is listening on [ 'any' 1433]. Firewall rules are in place Any suggestions on things that i can look into? i have really just run out of ideas.

  Read the article

• Remove a known network from Windows 8

  - by Edward Brey

  When Windows 8 detects a network based on the assigned IP address, netmask, default gateway, etc., it remembers the network along with the setting you give it as a public or private network. If you change the configuration of a network (e.g. reconfigure your router), Windows may determine you are on a new network and assign it a name of Network 2 or YourAPN 2. This less-than-friendly name shows up in many places in the Windows 8 UI, but unlike the good old days of Windows 7, there doesn't appear to be any UI to merge or delete these networks. What's the best way to merge or delete networks you don't want?

  Read the article

• Dediced server for all network functions?

  - by Alan

  I want to set up a fictional network configuration for a school in my neighborhood. They have about 50 computers altogether, 2X20 in computer rooms for students and another 10 scattered around for various professors. They should all access the internet through a dedicated Linux router machine. What they would like is to have domain names for those three computer groups. Lab1, Lab2 and Professors. The computers in Lab2 and Lab1 should have static ip and should all be named by numbers. So there should be 1@Lab1, 2@Lab1.... etc. And the Professors network should have a DHCP, with authentication. Is it an ok solution to have all these functions on a single server? (The one which will be used as a router) Do I have to set a local DNS for domain naming? Do the host names for Lab computers have to be set on the clients, or can they be automatically assigned?

  Read the article

• localhost works 127.0.0.1 does not IIS

  - by NickatUship

  Very weird problem on IIS. Never had it before: localhost works, but 127.0.0.1 does not. localhost pings to 127.0.0.1. www.mydomain.com also pings to that IP, which is set up in the hosts file, but that also doesnt work locally. I've ipconfig /flushdns 'd without success. Ive even restarted the server. Another server set up the exact same way works fine. Any ideas? To be clear, im accessing the URLs in IE like this: http://localhost http://127.0.0.1 http://www.mydomain.com I can telnet to port 80 without a problem for all 3

  Read the article

• Dhcp clients fail after successful import of server to new machine (win2k3)

  - by Tathagata

  I transfered the configs of a dhcp server from one server to another both running Windows Server 2003 R2 following http [://] support.microsoft.com/kb/325473. The new server has a statically configured ip(outside the scope) like the old one. Stopped the server on the old, and started up in the new server (authorized too) - but when I ipconfig /renew from a client its network interface fails with all 0.0.0.0 (or 169...*). I read somewhere I need to reconcile the scope to sync the new registry values ('ll try this tomorrow). What other troubleshooting steps can I take other than these (which didn't help)? Things work fine when the old server resurrects and the new one is taken down. The new server showed there was no requests for offer.

  Read the article

• Unable to get to remote samba share

  - by tubaguy50035

  I have a remote VPS that I would like to setup samba on and only allow my IP access to it. I currently have in my smb.conf: [global] netbios name = apollo security = user encrypt passwords = true socket options = TCP_NODELAY printing = bsd log level = 3 log file = /var/log/samba/log/%m debug timestamp = yes max log size = 100 [hosting] path = /hosting/ comment = Hosting Folder browseable = yes read only = yes guest account = yes valid users = nick I have the ports (137,138,139,445) open in iptables (they're open to everyone right now while I debug) and I see nothing in the syslog about iptables blocking my requests. When I try to open a file browser to my address \\ipaddress, it hangs for a good thirty seconds, and then opens a log in box. I enter my user name and password for the server, hit okay. It then opens the same box, I enter my credentials again and hit enter. Windows then tells me it could not connect. My user account is added to Samba already. Anybody have any suggestions what I can do to get this working?

  Read the article

• Windows Server 2003: Router, DHCP, Looses internet connection

  - by jM2.me

  I have following setup: a windows server 2003 dedicated server with tho nics. One is connected to internet (no modem/router), and second one is connected to private network. Server has DHCP server installed on it and internet nic is being shared for internet access. The problem is sometimes server looses connection to the internet, so same happens to private network. So far I can manually fix it by releasing and renewing IP address. What could be the cause of this problem? DHCP lease from ISP? Thanks

  Read the article

• Preventing my postfix to send my local users spam

  - by Jack

  I have a postfix/dovecot mail server with 100 different users. When they send an email they need to be authenticated. I successfully use saslauth to achieve this. Few days ago I had a problem. One specific user, probably with a virus or a spam-bot installed in its computer, started to send out through my server thousands of emails in few hours. As result, my ip has been blocked by many isp provider (@aol, @yahoo, and others) and has been listed in many blacklist, making all my 100 users unable to send any email to anyone. What is the best practice to avoid this problem? It would be great if my server could recognize a spamming user and automatically block it. Also, have a limit of, say, 30 emails per hour could be a partial solution. Any idea how to face this problem? Thank you

  Read the article

• Getting started with the vCenter Web Client Administration tool

  - by Saariko

  I am trying to access a newly vCenter. The documentation clearly mentions to access the web-admin through: https://localhost:9443/admin-app but since I don't have a windows OS built under the vCenter (I use the vCenter Appliance) There is no localhost to use. If I try with the host IP I get the error: This PDF explains to install IIS component - But it's ESX 4 - and also not talking about appliance. so, a simple question: how can I access the web-app admin tool? also found a similar question on vmware forum. But I can't understand the solution/if any.

  Read the article

• apache httpd cannot browse through browser

  - by nuttynibbles

  i've setup apache and php on a virtual machine. everything works fine in the virtual machine. im able to execute php files and run up phpmyadmin connecting to mysql. on my host machine, im able ping and ssh into the remote machines. however, im unable to browse the php files on the host browser using the ip address. in my httpd.conf, im listening to port 80. i enabled the ServerName 192.168.75.102:80 am i missing some settings? port settings maybe?

  Read the article

• vmware player - ubuntu can resolve hostname but ping fails

  - by recursive_acronym

  Using VMware players on Windows 7 with a Ubuntu 10.04 guest. When I ping it resolves the ip address but the ping fails. Hopefully this is a local issue as I don't have access to any of the network equipment (routers, etc). vmware tools is installed. Is there any other information I can provide to help resolve this? eth0 Link encap:Ethernet HWaddr 00:0c:29:83:4f:c0 inet addr:192.168.163.129 Bcast:192.168.163.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe83:4fc0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:475 errors:0 dropped:0 overruns:0 frame:0 TX packets:179 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:50006 (50.0 KB) TX bytes:16701 (16.7 KB) Interrupt:19 Base address:0x2024 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:480 (480.0 B) TX bytes:480 (480.0 B)

  Read the article

• NATing with a single-homed machine possible?

  - by Harry

  I have the following setup: a) a single-homed machine, A, that can see the Internet. b) other machines B, C, and D that cannot see the Internet. c) A, B, C, and D can see each other. d) all machines are running either RHEL 5.3 or Fedora 16. Question: Is it possible to have B, C, and D share the Internet connection with A somehow? Note, again, that machine A does not have a second NIC installed. (The solutions that I am finding on the Net assume A to be a dual-homed system!) Also, could you please recommend a set of book(s) or online resources for a current and in-depth coverage of iptables for people with only a basic knowledge of TCP/IP?

  Read the article

• Mail being delivered to both old and new server.

  - by Duane

  Two days ago I migrated our old site to a new server. I turned down the ttl before I did it and some email is still going to our old server and some to our new after a little over 48 hours. Both these are on shared hostgator sites. From what I can tell everything is set up properly. An nslookup points to the right ip address. Any insight? Support just tells me that everything is set up properly and I have to wait for propagation. I've never had it take over 48 hours though.

  Read the article

< Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >