Search Results

Search found 25963 results on 1039 pages for 'ask for recommendation'.

Page 341/1039 | < Previous Page | 337 338 339 340 341 342 343 344 345 346 347 348  | Next Page >

• How do I get Graphics drivers / bluetooth / card reader working on an Acer Aspire V3-571G?

  - by Adam

  A couple of days ago I bought an Acer Aspire V3-571G laptop without a system installed on it. The only thing that was there was Linux Linpus. I created a bootable CD with Ubuntu 12.04 64-bit - I read that my processor was 64 bit and that it might be a good configuration for my gear (I'm not especially fluent with all the computer stuff, still trying to learn) and replaced Linpus with Ubuntu. Everything seemed to work fine, but there're few exceptions to that which came pass my way. My bluetooth doesn't work. It seems to be switched on, but when I check my system settings the button is actually off, and I can't drag it 'perminently' to the 'on' position. Tried a couple of commands I found on the net, none of them helped and there was no word whatsoever in my BIOS settings about enabling bluetooth. My card reader has some serious problems with copying more than one file at a time. I tried to put some music on my phone through a MicroSD card adapter (because my bluetooth doesn't work) and it got stuck every single time I copied an album on it. I'm not sure if all my drivers were properly installed, so I checked in the terminal if it could tell me sth about my graphics. typed: sudo lshw -c display and what i got was: *-display UNCLAIMED description: VGA compatible controller product: NVIDIA Corporation vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller cap_list configuration: latency=0 resources: memory:b2000000-b2ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:2000(size=128) *-display description: VGA compatible controller product: Ivy Bridge Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:b3000000-b33fffff memory:c0000000-cfffffff ioport:3000(size=64) As I said I'm no expert and not english-speaking generally, but it doesn't seem to be right. I've got a NVIDIA GeForce GT 640M.

  Read the article

• Webcam doesn't work in browser...?

  - by ReticentGrace

  I'm running the latest version of Ubuntu, and I have a Dell Sp2009wfd monitor with built in microphone and webcam. I've gotten the microphone working on mumble and on sound recorder, and I've gotten the webcam to work on Cheese...but it WON'T work through the flash player//website webcam things. I -have- the flash plugin, and I have drivers installed for my video card. Could anyone help me figure this out? It's really frustrating. Thank you...!

  Read the article

• What does ENDOFMENU do?

  - by Raymond

  I have been given an example program, I am wondering what exactly the <<ENDOFMENU and ENDOFMENU does, won't it work the same if you leave it out and just use the while loop? #!/bin/sh echo "Menu test program..."; stop=0; while test $stop -eq 0; do cat<<ENDOFMENU 1: print the date 2,3 : print the current working directory 4: exit ENDOFMENU echo; echo -e "your choice?\c" read reply echo case $reply in "1") date ;; "2"|"3") pwd ;; "4") stop=1 ;; *) echo illegal choice esac done

  Read the article

• Possible to migrate from non-RAID to RAID 1 and then RAID 5?

  - by stueng

  Using software RAID only Is it possible to start with a 2TB disk full of data and safely add it to a RAID 1 array? Is it then possible to add a third disk and migrate the RAID 1 array into a RAID 5 array? OR Is it possible to start with a 2 disk degraded RAID 5 array and then add the third disk later to create a health RAID 5 array? Backstory: I wish to migrate from a 2 disk NAS (RAID 1) to a 3 disk NAS and only purchase one new disk in doing so

  Read the article

• nVidia GeForce Go 7600? can it ever run unity?

  - by Khaled Musleh

  my laptop Toshiba Qosmio G30 has nVidia GeForce Go 7600 card and it suppose to support 3D . i run unity 2d now . I run 12.04 and the graphic driver is--VESA: G73 Board - toshg73m-- by UBUNTU. when i run /usr/lib/nux/unity_support_test -p then i get this list Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no the card is not blacklisted but a similar one with GT is! Do you think that there is a chance the laptop can run the unity 3d? and may be i could change the resolution of the screen to a higher one too! I tried all the nvidia drivers provided but none works (except 96 in ubuntu 12.04 ). i get a black screen or terminal screen. best wishes to all

  Read the article

• 14.04 LTS, 32-bit, Software Updater error "Failed to download repository information: Check your internet connection"

  - by Lucas W

  There isn't much to say about this one: when I run Software Updater, I get the above error message. That can't be good. Interestingly, when I click on "Settings..." and then close the settings dialogue that pops up, all of a sudden Software Updater successfully finds updates and installs them. I thought I should bring this to the attention of the Ubuntu community. sudo apt-get update returns the following: W: Failed to fetch http://ppa.launchpad.net/deluge-team/ppa/ubuntu/dists/trusty/main/binary-i386/Packages 404 Not Found E: Some index files failed to download. They have been ignored, or old ones used instead. I have screen captures, but I don't have enough reputation points to post them.

  Read the article

• passing a font as an argument to a script

  - by josinalvo

  I am trying to use osdSH for notifications. It has a 'font' parameter that receives a curiously formed string. From the man: -f -font Set font (Default: -*-lucidatypewriter- bold-*-*-*-*-240-*-*-*-*-*-*) The manual does not comment on the arguments passed (I assume each * represents a possible argument). It would seem that this notation is (or has someday been) standard, but I've not been able to find anything about it. what is the standard ? what argument specifies letter size ?

  Read the article

• Problem with lucid install from ISO.

  - by joon

  Hi, I am trying to install Lucid from an iso (bios doesnt let me boot from USB and dvd drive is busted). I followed the instructions on the bottom of this page: ´The CD image approach´ https://help.ubuntu.com/community/Installation/FromWindows The ubuntu ALTERNATE iso is in my c: root dir. I even tried a fix that used to work in older versions (found on a forum) but that did nothing. What happens: - boot until the boot.ini menu - select install ubuntu - select install ubuntu again, I´m assuming this is grub - do some country settings,.. - harddrive is scanned for ISO image - not found, not even with thorough search...

  Read the article

• How to resize a /home partition in Kubuntu?

  - by Devon

  I was distro hopping for awhile in the past few months, so in order to keep all of my files secure, I made a partition of around 50 GB named Files to store all of my files in, and still have them for quick and easy access. However, now that I've found a distribution I'm comfortable with (Kubuntu 11.10), I would like to remove this partition, and have all of my files in my /home folder, in order to more easily deal with these files. I've moved all of my files in the partition to my /home folder (and still have plenty of room to spare), and now I'm trying to delete the partition and use the space for my /home folder. I can delete the partition just fine, however, I can't extend the /home folder into the unallocated space. Here's a screenshot of what I'm talking about. In order to change the size of the /home partition, I need to unmount it. But, I am unable to unmount it! How do I best extend the size of the partition?

  Read the article

• Wlan connection got lost permanent

  - by chris

  I have a desktop with a fritz usb wlan n tick and tried ubuntu 12.04. installlation is fine and wlan is working, however connection drops permanent. reconnecting manually fixes it but after a few minutes it drops again. it's connected to a vodafone 802 box with wlan n fix set. it seems that it works when i switch off n mode...but i need to test. can someone confirm or is there another solution? i have another machine with 12.04 (hp 625 laptop) running where connection is stable. any help much appreciated. thank chris

  Read the article

• Synchronizing (updating) published files

  - by MucMug

  How can I update a published file and maintain the same URL? After saving an update of a published file on my desktop, it will automatically "synchronise" with the corresponding files at UbuntuOne (and it does). Problem is that the "new file", actually the updated file with the same name, is no longer published. Pressing the publish button results is a new URL. I now have to mail new URL's and change embedded links, as old URL will result in a failure to find the updated file (or indeed any file). I am not sure if it is a bug or a design flaw (maybe intentional?), but it seems strange to me.

  Read the article

• apt-get install does not work. Gives the same error every time E: Unable to locate package

  - by SAMEER

  There is an issue, for every package that I try to install. I am using VMWare Player 3.16 & I have installed Ubuntu 12.04. The error is: E:Unable to locate package (PACKAGE NAME) Also, another problem is that there are some configuration errors. So I have to use the CLI rather than the GUI. Now if this is a network error, I'm not sure as to how to open the setting from the command prompt. Even if I get to the GUI, it might not work, as the shortcuts are not available.

  Read the article

• Half-maximized windows misplaced after switching display

  - by Arild

  I have a laptop which I often plug into a larger screen with another display resolution. Thus I'm frequently changing the screen for the system to use. Also I've recently discovered the advantages of half-maximizing windows when working alternatingly in two or more applications. When changing screens, however the windows basically retain their absolute sizes and positions. So in my case the windows typically have their bottoms outside display, don't fill up half the display, etc. I have to half-maximize the windows again every time I switch screens. I'm thinking this should be subject of a bug report but I find it difficult to know where to file them. Any ideas on what package is responsible?

  Read the article

• Ipython and Matplotlib in Ubuntu 13.10

  - by LuizAngioletti

  I've recently updated my Ubuntu to the 13.10 version. To my surprise, Ipython and Matplotlib are available only in versions prior to those I had in my previous 12.04 LTS install. When with the 12.04, I had the Julian Taylor PPA set up in my repositories, and that's why (I think) I had most up-to-date versions from both packages. The versions currently in 13.10 are: Matplotlib: 1.2.1 (http://matplotlib.org/index.html, most current version is 1.3.1) Ipython: 0.13.2 (http://ipython.org, most current version is 1.1.0 – September 2013) Is there any PPA available for the 13.10? The JTaylor ppa covers only as far as 12.10 (Quantal, link not available due to reputation rank in stack exchange) Should I install those packages outside apt? Isn't that troublesome?

  Read the article

• Which is the best method to install/uninstall apps in Ubuntu?

  - by Mujahid

  While apps can be installed with the apt-get command, Synaptic Package Manager or Ubuntu Software Centre, can anybody throw some light on which is the best method? I recently installed kubuntu-desktop and as a result even Ubuntu Software Centre showed that it was installed. When I tried uninstalling it with Ubuntu Software Centre, the package didn't actually uninstall until I used Synaptic once again.

  Read the article

• Connection manager detects network but won't connect

  - by Carson Chittom

  I've just installed 12.04 on my home desktop. Because of where it's located, in order not to have my children tripping over cat5 cable, I've got a cheap 802.11n USB device plugged in, which uses a Realtek 8192CU chip. The house wifi is protected with WPA2. Ubuntu's Network Manager detects the network, but connecting to it just times out and asks for the password again. I'm sure I'm using the correct password. No other computers on the house network are having any difficulty. This device previously worked correctly with both Windows 7 and OpenBSD in the same machine. The linux-firmware package is installed (from the disc) at version 1.79, and /lib/firmware/rtlwifi/rtl8192cufw.bin is present. dmesg|grep rtl only shows the "loading firmware" message. I've tried Google, but I apparently can't find the right set of words to plug in, because I haven't found anything related (lots of "doesn't work at all," but nothing matching my circumstances). Any help would be greatly appreciated.

  Read the article

• 3+ monitors, nvidia + intel graphics

  - by gozzilli

  I have seen lots of different posts on this issue, but I cannot figure out what to do. I hope we can collect the available information in one place, so that they can be useful for others. Is it possible to have multiple (3+) monitors running on two different graphics cards? I have 1x nVidia GeForce GTX 550 with 2 DVI ports and 1x Intel integrated graphics, with 2 DVI ports. I understand that they would be running on different instances of X servers. Is that correct? Could someone point me in the right direction to start? On Windows it's so simple, there is no additional thing to do other than going in display preferences and activating all 3+ monitors. They can even be laid out alternating one monitor from one graphics card with another monitor from the other card.

  Read the article

• Ubuntu 12.04 Install Problems.. Installation Type screen. No options [closed]

  - by Zaffiro

  Possible Duplicate: Only ‘sdb’ shows up when installing 12.04 on a new Dell inspiron 14z I am new to Linux and trying to install Ubuntu 12.04 on a new HP Pavilion DV6TQE Ivy Bridge and being presented with the below screen which I believe is incorrect. My disk is set up as a basic disk (not dynamic) and I tried with a single C:\ partition and by creating a second partition in windows with no luck. Any ideas? UPDATE: I think I know what the problem is but I don't know how to fix it yet.. My hard drive has a 32gb mSSD cache which is listed as dev/sdb. for some reason this is causing the installation trouble.

  Read the article

• Copying kernel and initrd problem while setting up a server

  - by user3452627

  I'm trying to set up a server using PXE and following this (clickable) instruction. But I have a problem in part Creating your NFS installation Right here: Copy kernel and initrd to tftp root. Run these commands ON THE SERVER sudo cp ~/vmlinuz-`uname -r` /tftpboot/ sudo cp ~/initrd.img-`uname -r` /tftpboot/ Actually, I don't know which kernel (server's or client's) should be copied. There isn't any files like those in my home folder on server. Can anybody tell me how to fix it?

  Read the article

• How to make a link to a .desktop [Desktop Entry] file

  - by Gonzalo

  I made a link on my Desktop to the launcher file "Compiz" in /usr/share/applications/. When I try to execute it I get: "The application launcher "Link to compiz.desktop" has not been marked as trusted. If you do not know the source of this file, launching it may be unsafe." So my question is how to make such a launcher on my Desktop? Otherwise, what kind of file are these [Desktop Entry] files and how can they be executed (by double clicking on them) if they have permissions such as: -rw-r--r-- 1 root root 396 2010-12-17 15:23 compiz.desktop

  Read the article

• Error while installing spellchecker for LibreOffice

  - by nixnotwin

  When I run this command: sudo apt-get install aspell aspell-en dictionaries-common hunspell-en-us myspell-en-us I get the following error: Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: hunspell-en-us : Conflicts: myspell-en-us but 1:3.2.1-2ubuntu1 is to be installed I used this guide to install LibreOffice.

  Read the article

• How do I fix gnome shell themes?

  - by Chris

  This is my fifth full format and install of Ubuntu in under a month. I finally have my Gnome 3 desktop working again, but again, the Gnome shell themes is not select-able. I have asked the question of how to fix this common issue before, but I have seen no positive resolution. Does anybody know of a simple fix? This is a common issue and I have seen hundreds of postings related to it, but other users only seem to get half-way answers also and it goes unresolved. Would it be advisable to completely purge Gnome desktop and reinstall? If so how would I do this? I cannot use any extensions if the shell is not working, so I am desperately seeking resolution for the issue. Thanks in advance.

  Read the article

• How do I get rid of duplicates in Rhythmbox even though the music in my Home folder is not showing duplicates?

  - by Drake

  I clicked import within Rhythmbox in Ubuntu 12.04 so I could get music to Ubuntu from my windows partition. The music appeared in my Rhythmbox library and I started playing it. However, when I restarted my computer the imported music did not show up. I looked in my music library and it was completely empty. So, I copied all of my music from my Windows partition into my music folder and launched Rhythmbox, but now it shows duplicates of all of the music I have. How can I get rid of the duplicate files if they are not showing in my Home folder?

  Read the article

• Temporary R+W CIFS share for non-root accounts?

  - by Coder

  I want to set up a cross platform mail client (Thunderbird), and so far I want to use NAS as a profile store. The NAS is CIFS based, and can be mounted on both Windows and Ubuntu. Also the locking works fine for mutex, and setup seems to work as a proof of concept. The problem is the Linux mount. Since I'm using a laptop, I'm not always connected to network, hence, I can't use the /etc/fstab to set up CIFS share with a modified group id. And the share has to be mounted using mount -t cifs ..., which causes it to be owned by root, and owned so badly, that it can't be chowned to the regular user account. This causes read only issues for Thunderbird, which seem to be solved if Thunderbird is launched via sudo. But I would like to avoid that and use a script to mount the share on-demand to a profile location, with profile based privileges and access rights. Is there a way to achieve that?

  Read the article

• Failed install 12.04 on Intel Hardware Raid with Large Partition (> 2TB)

  - by Michael Wiles

  I have Intel Hardware Raid on the motherboard. I have 10 2 TB HDD that I've configured as RAID 1+0 to be one big 8 TB HDD. Now I'm trying to install ubuntu 12.04 on it. After installing with default desktop installation disk I get a blank screen with a cursor flashing. If I try the alternate guided partitioning option I get error: out of disk. and the grub prompt. If I boot with the rescue disk or such like I can drop into a shell and view the disk. Everything also installs without an issue. Don't know what to do...

  Read the article

< Previous Page | 337 338 339 340 341 342 343 344 345 346 347 348  | Next Page >