Search Results

Search found 26928 results on 1078 pages for 'disk image'.

Page 342/1078 | < Previous Page | 338 339 340 341 342 343 344 345 346 347 348 349  | Next Page >

  • It could be worse....

    - by Darryl Gove
    As "guest" pointed out, in my file I/O test I didn't open the file with O_SYNC, so in fact the time was spent in OS code rather than in disk I/O. It's a straightforward change to add O_SYNC to the open() call, but it's also useful to reduce the iteration count - since the cost per write is much higher: ... #define SIZE 1024 void test_write() { starttime(); int file = open("./test.dat",O_WRONLY|O_CREAT|O_SYNC,S_IWGRP|S_IWOTH|S_IWUSR); ... Running this gave the following results: Time per iteration 0.000065606310 MB/s Time per iteration 2.709711563906 MB/s Time per iteration 0.178590114758 MB/s Yup, disk I/O is way slower than the original I/O calls. However, it's not a very fair comparison since disks get written in large blocks of data and we're deliberately sending a single byte. A fairer result would be to look at the I/O operations per second; which is about 65 - pretty much what I'd expect for this system. It's also interesting to examine at the profiles for the two cases. When the write() was trapping into the OS the profile indicated that all the time was being spent in system. When the data was being written to disk, the time got attributed to sleep. This gives us an indication how to interpret profiles from apps doing I/O. It's the sleep time that indicates disk activity.

    Read the article

  • Install on Acer Aspire 4752

    - by user216962
    I am at my wits end with this computer. I bought and Acer Aspire 4752 with a fully loaded version of Windows 7 on it. I prefer Ubuntu so I began to install 14.04 from USB. Got the error: [Errno 5] Input/output error This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment. So I tried a different USB stick, same error. Tried different versions of Ubuntu, got the same error. I've used startup disk creator and Unetbootin to make start USB boot devices. I can boot with the USB drive and run Ubuntu that way. I even checked the hard drive using the tools in Ubuntu. Everything was fine, except it said the hard drive was hot. I tried a different hard drive. Got same error above. I ran a test with mem86, everything was fine. No matter what I do, using the USB gives me the Errno5 error. I then switched to using DVDs. Now I keep getting an uncompression error when installing Ubuntu 14.04 or 12.04. I can't figure out for the life of me why I get nothing but errors. Can anyone help?

    Read the article

  • Help with dual booting Windows 8.1 Professional and Ubuntu 13.10

    - by user1292548
    I recently installed a clean version of Windows 8.1 Professional on my Lenovo Y500 (with Samsung 256GB 840 Pro SSD). I have Windows all set up and running normally. I am trying to dual boot Windows 8.1 and Ubuntu 13.10, but the installation procedure don't allow me to either "Install alongside..." or shows my SSD partitions correctly when I chose the "Something Else" option. I have created a 25GB partition of free space in the Windows disk manager, but on the installation screen on Ubuntu, it shows the whole drive as a free space. I have tried installing with a burned .ISO disk and a bootable USB, the results are the same for both. Windows Disk Management screen: http://imageshack.us/a/img855/9504/59zu.jpg The Ubuntu installation screen: http://imageshack.us/a/img62/2712/9g6i.jpg I've ran into this problem before when trying to dual boot Ubuntu and Windows 7 Professional a month ago. But I gave up and never resolved the issue. --EDIT-- I tried what Eero Aaltonen suggested, and this is my result: ubuntu@ubuntu:~$ sudo parted /dev/sda print Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table. However, it does not have a valid fake msdos partition table, as it should. Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables. Or perhaps you deleted the GPT table, and are now using an msdos partition table. Is this a GPT partition table? Yes/No? yes Model: ATA Samsung SSD 840 (scsi) Disk /dev/sda: 256GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags ubuntu@ubuntu:~$

    Read the article

  • Dual Boot menu with Ubuntu and Windows 8 not showing up

    - by user180630
    I know a lot of posts have been written, and I had read most of them when I encountered the problem. None of them solved the problem. I have successfully installed Ubuntu 12.04 on top of Windows 8. Now my PC simply boots into Windows 8. If I press 'Esc' at start of BIOS, and then F9,the GRUB shows up and Ubuntu is listed at the top of the several options to boot from. I did run Boot-Repair once I logged into Ubuntu explicitly from GRUB as mentioned above. I did all said by Stormvirux in this link but was still unsuccessful. The debug info is listed here. Something which confuses me is the message which Boot-Repair stated after it did its job. You can now reboot your computer. Please do not forget to make your BIOS boot on sda (8004MB) disk! The boot files of [The OS now in use - Ubuntu 12.04.2 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, 200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition) I don't know why it says it is far from the start of the disk as I see it first in the GRUB menu which comes up at startup. One more input, when I try to place the GRUB in sda, Boot-Repair does not progress giving me the following error: GPT detected. Please create a BIOS-Boot partition (>1MB, unformatted filesystem, bios_grub flag). This can be performed via tools such as Gparted. Then try again. Alternatively, you can retry after activating the [Separate /boot/efi partition:] option. I had to select Separate /boot/efi partition: sdb2

    Read the article

  • SD Card only mounted after a reboot

    - by evothur
    Hi everyone. I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

    Read the article

  • ubuntu 12.04 installer does not recognize drive partitions

    - by endless forms
    I recently purchased a new HP Pavilion HPE desktop running Windows 7. I am trying to install a dual-boot system with 12.04. However, when I run the LiveCD I only get as far as the "Install" window where you can select the partitions for your drives. On the bottom where it says "device for boot loader installation" I have "/dev/sda" and cannot select any other devices. All the options to change the drives are greyed out, most likely because there are no drives in the window. I partitioned my largest drive using the tools within Windows, then booted into the CD, but nothing shows up. I then used Gparted to change the new space from unallocated to an /ext2, and still nothing shows up. The installer does not recognize anything, but when I go into an Ubuntu session and use the disk utility manager I can see the partitions I made. Anything I do has to be done outside of the installer. I have no files on this new computer, so this is the perfect time to install a parallel OS. I would like avoid completely reinstalling Windows, however. I've been over the forums many times, but all the answers I've found have not worked for me. I also tried flagging the new, empty partition as boot, but that screwed Windows up. Also, the WUBI installer hits the same point and quits. I know that the disk itself is fine because I just made another dual boot system on a Gateway PC. This makes me think something within this computer is preventing the installer from "seeing" the drives. Any help would be much appreciated! Edit in response: The main part of the partitioning window shows no partitions, everything is blank. There is no way to add partitions, and all the buttons are useless. I've tried defragging my drive multiple times, and I also used the same disk to dual-boot another PC with no problems, so it's not the disk, it's definitely the computer.

    Read the article

  • Drive reporting incorrect free space

    - by Oli
    So I swapped my shiny SATA SSD for an even shinier PCI-E SSD. I run my core OS on the SSD because it's silly-fast. I did this on my old SSD so I created a new EXT4 partition and then just dded the data across (sorry I don't know the exact command I ran anymore) and after reinstalling grub, I booted onto the PCI-E SSD. At first glance everything had worked perfectly and things were running faster than ever. But then I noticed the free disk space on the new, larger drive: it was almost exactly the same as it was on the other disk... A disk that was half its size. So it looks as if I've copied the files across incorrectly and it's copied some of the filesystem metadata along with it. Tools like du and Disk Usage Analyzer come back with the correct figures. Things that look at the partition (and not the files) seem to think the drive is 120GB I've been using this drive for a week now so it's way out of sync with the old SSD so dumping the data and starting again isn't a job that fills me with joy but two questions: Is there a way to fix my filesystem so it knows what it's really on about? fsck e2fsck and badblocks all seem to be able to scan it without finding a problem with it. If I do plug my old SSD back in, copy the data off my PCI-E on to it and then copy it back onto a fresh filesystem (eg juggle the data around), what's the best way of doing that? I obviously want to keep all the permissions and softlinks where they are.

    Read the article

  • My new hard drive won't automount on boot

    - by user518
    I installed a new hard drive right before installing the new Ubuntu 11.10 by reformatting, not upgrading. I was able to mount my drive, and partition it. It's a 1TB, and I was able to transfer all of my music, and videos to it. For some reason, it won't mount on boot, and I can't figure out how to manually mount it afterwards either. Here's my current /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=e0fbdf09-f9a0-4336-bac3-ba4dc6cfbcc0 / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda5 during installation UUID=adf15180-c84c-4309-bc9f-085fd7464f89 none swap sw 0 0 /dev/sdc1 /media/sdc1 ext4 defaults 0 0 The last line is what I added for my hard drive. Here's the output from sudo lshw -C disk: % sudo lshw -C disk ~ *-disk:0 description: ATA Disk product: ST3250310AS vendor: Seagate physical id: 0 bus info: scsi@2:0.0.0 logical name: /dev/sda version: 3.AD serial: 6RYBF2QE size: 232GiB (250GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000da204 *-cdrom description: DVD-RAM writer product: DVD+-RW DH-16A6S vendor: PLDS physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd0 logical name: /dev/sr0 version: YD11 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc

    Read the article

  • ubuntu boots only with usb

    - by klimat
    Just installed Ubuntu 11.04. But it boots only from usb. Seems like I didn't pay attention during selecting boot device. sudo fdisk -l [sudo] password for klim: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x000177e1 Device Boot Start End Blocks Id System /dev/sda1 1 60045 482302976 83 Linux /dev/sda2 60045 60802 6080513 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 60045 60802 6080512 82 Linux swap / Solaris Disk /dev/sdb: 4004 MB, 4004511744 bytes 124 heads, 62 sectors/track, 1017 cylinders Units = cylinders of 7688 * 512 = 3936256 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000eee1a Device Boot Start End Blocks Id System /dev/sdb1 * 1 1017 3909317 b W95 FAT32 grub updating or another "grub" operations don't work as I've tried. Can I just copy whole boot folder from usb to HD or smth like that? Any kind of help is appreciated. Apologize for my newbie skills.

    Read the article

  • Can't mount my USB Drive

    - by user996056
    ~> sudo mount /dev/sdb1 /media/Disk Did not find any restart pages in $LogFile and it was not empty. The file system wasn't safely closed on Windows. Fixing. I have a USB Hard Disk and Windows can't detect it. So I tried to open it up on Ubuntu using gparted. Gparted detects the NTFS partition, so everything seems to be fine (note, though, that the total size of the files in this disk is over 1 TB). I tried to mount it using: sudo mount /dev/sdb1 /media/Disk But I got: Did not find any restart pages in $LogFile and it was not empty. The file system wasn't safely closed on Windows. Fixing. Then, the process just sits there blinking. Any ideas on how to fix it? It's taking forever ( 10 minutes), should I wait or cancel it and do something else? Thank you in advance.

    Read the article

  • Mounting a new hard drive (sda1) to my existing filesystem

    - by shank22
    I tried to read some posts regarding mounting a new hard drive, but I am facing some problem. My new hard drive is sda1. The output of sudo fdisk -l is: sudo fdisk -l Disk /dev/sdb: 999.7 GB, 999653638144 bytes 255 heads, 63 sectors/track, 121534 cylinders, total 1952448512 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00016485 Device Boot Start End Blocks Id System /dev/sdb1 * 2048 1935822847 967910400 83 Linux /dev/sdb2 1935824894 1952446463 8310785 5 Extended /dev/sdb5 1935824896 1952446463 8310784 82 Linux swap / Solaris Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x78dbcdc1 Device Boot Start End Blocks Id System /dev/sda1 2048 1953521663 976759808 7 HPFS/NTFS/exFAT What should be done to add this new sda1 hard drive on booting up? What should be added in the /etc/fstab file? I have not performed any partition on the new sda1 drive. I need help on how to proceed from scratch and can't afford to take any risk. Please help!

    Read the article

  • ??OSW (OSWatcher Black Box) ????

    - by Feng
       OSWatcher Black Box, ??OSW,?oracle???????????????,?????OS??????????OS??????????,??CPU/Memory/Swap/Network IO/Disk IO?????? +++ ????????OSW? OSW?????????,????????????????,???mrtg, cacti, sar, nmon, enterprise manger grid control. ????OSW?????: 1. ???????,???????2. ???????,????CPU,???????????3. ???????,????????????????????????OS? ???????OS???,??OS?????,?????????????;??????????????????????,???????. ???????,????????:?????????,??????????,????????????(root cause),?????????????????????????,OSW??????,??????: 1. ??????????OS??????????????????????????OSW??,?????????OS??,??????DB/???? 2. ??ORACLE Database Performance???,?????????????OS??????OS?????????????Swapping,???????????????,?????????,???AWR?????????latch/mutex?????? 3. ??????????????AWR??????????,top5??????????;?CPU,??,Swap, Disk IO?????????????OSW??????????,????????????????????????OSW???,??????????????? 4. ?????ORA-04030?????CJQ0, P00X, J00X?????????,???????OSW,???????????????????OS????????? 5. ????server process??hung?,??????OSW????????????????suspend???,?????????CPU/Memory? 6. ??Listener hung???,?????OSW??????????????? 7. Login Storm??:????????????,????,????ASH,AWR????????????????OSW?ps?????,??????, oracle ?server process????????? ???,OSW????????????????????OS?????????????,??????DBA???OSW??????????????OSW,????DB Performance????,????????OSW???? +++ ?????OSW??????: 1. ??????????????,???????,???????? 2. OSW???????? OSW??????????????OS???????,??ps, vmstat, netstat, mpstat, top;????????????????? ?????????CPU, Disk IO, Disk Space, Memory;???????????????,??????????????????????????,??OSW????????:?????????,CPU????90%??;???free space???????????????????????????,??OSW????????? +++ ????????UNIX/LINUX???/??OSW: 1. ???301137.1???OSW 2. ????????(/tmp??),??????????root?? $ tar xvf osw.tar 3. ?? $ nohup ./startOSWbb.sh 60 48 gzip & ????????,??OSW,????60???????,???????48?????(??????????),???????gzip?????? 4. ????? $ ./stopOSWbb.sh ?????????archive???? ????????????????????OSW???????,???????

    Read the article

  • "pdf_open: Not a PDF 1.[1-5] file." when typesetting TeX file in TextMate

    - by Manti
    I have a TeX file, which is typeset by XeLaTeX. The file has \includegraphics{coverimage.eps} on the first page, and coverimage.eps is located in the same directory as the TeX file. OS: MacOS 10.6.5, TextMate 1.5.10, xelatex 3.1415926-2.2-0.9997.4 (TeX Live 2010) If I run xelatex doc.tex in console, file compiles without errors, and eps file is included. If I typeset it in TextMate (xelatex engine is selected in preferences), I get the following error: ** WARNING ** pdf_open: Not a PDF 1.[1-5] file. ** WARNING ** Failed to include image file "./coverimage.eps" ** WARNING ** >> Please check if ** WARNING ** >> rungs -q -dNOPAUSE -dBATCH -sPAPERSIZE=a0 -sDEVICE=pdfwrite -dCompatibilityLevel=%v -dAutoFilterGrayImages=false -dGrayImageFilter=/FlateEncode -dAutoFilterColorImages=false -dColorImageFilter=/FlateEncode -sOutputFile=%o %i -c quit ** WARNING ** >> %o = output filename, %i = input filename, %b = input filename without suffix ** WARNING ** >> can really convert "./coverimage.eps" to PDF format image. ** WARNING ** pdf: image inclusion failed for "coverimage.eps". ** WARNING ** Failed to read image file: coverimage.eps ** WARNING ** Interpreting special command PSfile (ps:) failed. ** WARNING ** >> at page="1" position="(107.149, 124.566)" (in PDF) ** WARNING ** >> xxx "PSfile="coverimage.eps" llx=0 lly=0 urx=408 ury=526 rwi=3809 and there is no image included in the resulting file (but text looks ok). I am not sure whether it is the error of xelatex or TextMate LaTeX bundle. What I tried to do: As I said, xelatex doc.tex from console works. The exact command line that TextMate uses is: xelatex -interaction=nonstopmode -file-line-error-style -synctex=1 But it works from console too. If I convert the image to pdf (and fix the .tex file accordingly), typesetting from TextMate works too. I tried running rungs with parameters specified in the error message, and got valid .pdf file with image as a result. I compared .log files from typesetting in TextMate and in console, they are absolutely identical except for this error message (in particular, version of xelatex is the same). Does anyone know what can cause this? Please tell me if you need any additional information. Thank you in advance.

    Read the article

  • classic asp: display jpg using response.BinaryWrite

    - by Fuxi
    hi, i'm displaying an image like this: <img src='counter.asp'> counter.asp is doing a hitcounter do determine how often the image was displayed (i'll replace it with a modrewrite url). the problem: in the counter.asp script i need to send the actual .jpg image to the browser, how could this be done? i suppose i need to load the image through FSO then send it using Response.BinaryWrite - any ideas? thanks

    Read the article

  • Delete a photo from the user's photo library?

    - by Jacob Relkin
    Hi, Is there a way I can delete an image that is loaded into my app from a UIImagePickerController? I want to be able to delete the image from the user's photo library when the user performs a specific action. I am prompting the user to choose a image from their library, then it gets loaded into my app at which point the app does some shnazzy animation, then actually deletes the image. Please help!

    Read the article

  • Optimized .htaccess???

    - by StackOverflowNewbie
    I'd appreciate some feedback on the compression and caching configuration below. Trying to come up with a general purpose, optimized compression and caching configuration. If possible: Note your PageSpeed and YSlow grades Add configuration to your .htaccess Clear your cache Note your PageSpeed and YSlow grades to see if there are any improvements (or degradations) NOTE: Make sure you have appropriate modules loaded. Any feedback is much appreciated. Thanks. # JavaScript MIME type issues: # 1. Apache uses "application/javascript": http://svn.apache.org/repos/asf/httpd/httpd/branches/1.3.x/conf/mime.types # 2. IIS uses "application/x-javascript": http://technet.microsoft.com/en-us/library/bb742440.aspx # 3. SVG specification says it is text/ecmascript: http://www.w3.org/TR/2001/REC-SVG-20010904/script.html#ScriptElement # 4. HTML specification says it is text/javascript: http://www.w3.org/TR/1999/REC-html401-19991224/interact/scripts.html#h-18.2.2.2 # 5. "text/ecmascript" and "text/javascript" are considered obsolete: http://www.rfc-editor.org/rfc/rfc4329.txt #------------------------------------------------------------------------------- # Compression #------------------------------------------------------------------------------- <IfModule mod_deflate.c> AddOutputFilterByType DEFLATE application/xhtml+xml AddOutputFilterByType DEFLATE application/xml AddOutputFilterByType DEFLATE application/atom+xml AddOutputFilterByType DEFLATE text/css AddOutputFilterByType DEFLATE text/html AddOutputFilterByType DEFLATE text/plain AddOutputFilterByType DEFLATE text/xml # The following MIME types are in the process of registration AddOutputFilterByType DEFLATE application/xslt+xml AddOutputFilterByType DEFLATE image/svg+xml # The following MIME types are NOT registered AddOutputFilterByType DEFLATE application/mathml+xml AddOutputFilterByType DEFLATE application/rss+xml # Deal with JavaScript MIME type issues AddOutputFilterByType DEFLATE application/javascript AddOutputFilterByType DEFLATE application/x-javascript AddOutputFilterByType DEFLATE text/ecmascript AddOutputFilterByType DEFLATE text/javascript </IfModule> #------------------------------------------------------------------------------- # Expires header #------------------------------------------------------------------------------- <IfModule mod_expires.c> # 1. Set Expires to a minimum of 1 month, and preferably up to 1 year, in the future # (but not more than 1 year as that would violate the RFC guidelines) # 2. Use "Expires" over "Cache-Control: max-age" because it is more widely accepted ExpiresActive on ExpiresByType application/pdf "access plus 1 year" ExpiresByType application/x-shockwave-flash "access plus 1 year" ExpiresByType image/bmp "access plus 1 year" ExpiresByType image/gif "access plus 1 year" ExpiresByType image/jpeg "access plus 1 year" ExpiresByType image/png "access plus 1 year" ExpiresByType image/svg+xml "access plus 1 year" ExpiresByType image/tiff "access plus 1 year" ExpiresByType image/x-icon "access plus 1 year" ExpiresByType text/css "access plus 1 year" ExpiresByType video/x-flv "access plus 1 year" # Deal with JavaScript MIME type issues ExpiresByType application/javascript "access plus 1 year" ExpiresByType application/x-javascript "access plus 1 year" ExpiresByType text/ecmascript "access plus 1 year" ExpiresByType text/javascript "access plus 1 year" # Probably better to explicitly declare MIME types than to have a blanket rule for expiration # Uncomment below if you disagree #ExpiresDefault "access plus 1 year" </IfModule> #------------------------------------------------------------------------------- # Caching #------------------------------------------------------------------------------- <IfModule mod_headers.c> <FilesMatch "\.(bmp|css|flv|gif|ico|jpg|jpeg|js|pdf|png|svg|swf|tif|tiff)$"> Header add Cache-Control "public" Header unset ETag Header unset Last-Modified FileETag none </FilesMatch> </IfModule>

    Read the article

  • Implement looped movement animation with tap to cancel

    - by Nader
    Hi All; My app is based around a grid and an image that moves within a grid that is contained within a scrollview. I have an imageview that I am animating from one cell to another in time with a slow finger movement and recentering the scrollview. That is rather straight forward. I have also implement the ability to detect a swipe and therefore move the image all the way to the end of the grid and the uiscrollview recentering. I have even implemented the ability to detect a subsequent tap and freeze the swiped movement. The issue with the swipe movement is that the UIScrollView will scroll all the way to the end before the Image reaches the end and so I have to wait for the image to arrive. Also, when I freeze the movement of the image, I have to re-align the image to a cell (which I can do). I have come to the realization that I have to animate the image one cell at a time for swipes and recentering the uiscrollview before moving the image to the next cell. I have attempted to implement this but I cannot come up with a solution that works or works properly. Can anyone suggest how I go about implementing this? Even if you are able to put up code from a different example or sudo code, it would help a lot as I cannot workout how this should be done, should I be using selectors, a listener in delegates, I just simply lack the experience to solve this design pattern. Here is some code: Note that the sprite is an UIImageView - (void)animateViewToPosition:(SpriteView *)sprite Position:(CGPoint)pos Duration:(CFTimeInterval)duration{ CGMutablePathRef traversePath = CGPathCreateMutable(); CGPathMoveToPoint(traversePath, NULL, sprite.center.x, sprite.center.y); CGPathAddLineToPoint(traversePath, NULL, pos.x, pos.y); CAKeyframeAnimation *traverseAnimation = [CAKeyframeAnimation animationWithKeyPath:kAnimatePosition]; traverseAnimation.duration = duration; traverseAnimation.removedOnCompletion = YES; traverseAnimation.timingFunction = [CAMediaTimingFunction functionWithName:kCAMediaTimingFunctionLinear]; traverseAnimation.delegate = sprite; traverseAnimation.path = traversePath; CGPathRelease(traversePath); [sprite.layer addAnimation:traverseAnimation forKey:kAnimatePosition]; sprite.center = pos; }

    Read the article

  • Implement looped movement animation with tap to cancel

    - by Nader
    Hi All; My app is based around a grid and an image that moves within a grid that is contained within a scrollview. I have an imageview that I am animating from one cell to another in time with a slow finger movement and recentering the scrollview. That is rather straight forward. I have also implement the ability to detect a swipe and therefore move the image all the way to the end of the grid and the uiscrollview recentering. I have even implemented the ability to detect a subsequent tap and freeze the swiped movement. The issue with the swipe movement is that the UIScrollView will scroll all the way to the end before the Image reaches the end and so I have to wait for the image to arrive. Also, when I freeze the movement of the image, I have to re-align the image to a cell (which I can do). I have come to the realization that I have to animate the image one cell at a time for swipes and recentering the uiscrollview before moving the image to the next cell. I have attempted to implement this but I cannot come up with a solution that works or works properly. Can anyone suggest how I go about implementing this? Even if you are able to put up code from a different example or sudo code, it would help a lot as I cannot workout how this should be done, should I be using selectors, a listener in delegates, I just simply lack the experience to solve this design pattern. Here is some code: Note that the sprite is an UIImageView - (void)animateViewToPosition:(SpriteView *)sprite Position:(CGPoint)pos Duration:(CFTimeInterval)duration{ CGMutablePathRef traversePath = CGPathCreateMutable(); CGPathMoveToPoint(traversePath, NULL, sprite.center.x, sprite.center.y); CGPathAddLineToPoint(traversePath, NULL, pos.x, pos.y); CAKeyframeAnimation *traverseAnimation = [CAKeyframeAnimation animationWithKeyPath:kAnimatePosition]; traverseAnimation.duration = duration; traverseAnimation.removedOnCompletion = YES; traverseAnimation.timingFunction = [CAMediaTimingFunction functionWithName:kCAMediaTimingFunctionLinear]; traverseAnimation.delegate = sprite; traverseAnimation.path = traversePath; CGPathRelease(traversePath); [sprite.layer addAnimation:traverseAnimation forKey:kAnimatePosition]; sprite.center = pos;

    Read the article

  • Problem of Three20: How to refresh TTLauncherItem

    - by WellBeing
    After adding TTLauncherItem into TTLauncherView, I want to change the image and title for the added TTLauncherItem? But when I changed the value of image and title, it was not working. There is no change on the view. Exit the program, and enter again, the image and title was changed. How can I refresh image and title of TTLauncherItem immediately? Thanks all~~

    Read the article

  • android - using resources drawable in content provider

    - by Russ Wheeler
    I am trying to pass back an image through a content provider in a separate app. I have two apps, one with the activity in (app a), the other with content provider (app b) I have app a reading an image off my SD card via app b using the following code. App a: public void but_update(View view) { ContentResolver resolver = getContentResolver(); Uri uri = Uri.parse("content://com.jash.cp_source_two.provider/note/1"); InputStream inStream = null; try { inStream = resolver.openInputStream(uri); Bitmap bitmap = BitmapFactory.decodeStream(inStream); image = (ImageView) findViewById(R.id.imageView1); image.setImageBitmap(bitmap); } catch(FileNotFoundException e) { Toast.makeText(getBaseContext(), "error = "+e, Toast.LENGTH_LONG).show(); } finally { if (inStream != null) { try { inStream.close(); } catch (IOException e) { Log.e("test", "could not close stream", e); } } } }; App b: @Override public ParcelFileDescriptor openFile(Uri uri, String mode) throws FileNotFoundException { try { File path = new File(Environment.getExternalStorageDirectory().getAbsolutePath(),"pic2.png"); return ParcelFileDescriptor.open(path,ParcelFileDescriptor.MODE_READ_ONLY); } catch (FileNotFoundException e) { Log.i("r", "File not found"); throw new FileNotFoundException(); } } In app a I am able to display an image from app a's resources folder, using setImageURi and constructing a URI using the following code. int id = R.drawable.a2; Resources resources = getBaseContext().getResources(); Uri uri = Uri.parse(ContentResolver.SCHEME_ANDROID_RESOURCE + "://" + resources.getResourcePackageName(id) + '/' + resources.getResourceTypeName(id) + '/' + resources.getResourceEntryName(id) ); image = (ImageView) findViewById(R.id.imageView1); image.setImageURI(uri); However, if I try to do the same in app b (read from app b's resources folder rather than the image on the SD card) it doesn't work, saying it can't find the file, even though I am creating the path of the file from the resource, so it is definitely there. Any ideas? Does it restrict sending resources over the content provider somehow? P.S. I also got an error when I tried to create the file with File path = new File(uri); saying 'there is no applicable constructor to '(android.net.Uri)' though http://developer.android.com/reference/java/io/File.html#File(java.net.URI) Seems to think it's possible...unless java.net.URI is different to android.net.URI, in which case can I convert them? Thanks Russ

    Read the article

  • drawing images and lines over UIScrollView

    - by Jorge
    I'm programming an app in which one of the ViewControllers is showing an UIScrollView that shows an image. I'd like to load an image (pushpin in png format) and draw it (and delete it) in some points of the UIScrollView image. I'd also would like to draw bezier paths in that image (and deleting them). I've programmed several apps but this is the first time I face graphic programming and don't know where to start from. Any suggestions? Thanks!

    Read the article

  • Need to sort using Obout Grid ?

    - by Anand
    By default when clicking the each column header it will automatically sorted. but I have placed a image in header column by clicking that image the column has to be sorted by priority level such as 0,1,2,.....the problem if i take datafield as priority the image disappears. I want use the datafield priority and sort according the image by priority. If anyone has suggestion please reply me asap.\ Thank you

    Read the article

  • Html2Canvas ...Google Map is not rendering

    - by eric maxfield
    I am running a Apache Server . I have a simple screen capture set up using Html2canvas .The capture function is rendering a blank Image . I have tried numerous ways to configure the javascript using related articles from this site to no Avail . The code is all working and tested because I can capture the image prior to "google maps api being loaded . Thank you and any advice would be much appreciated . <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN""http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"><html> <meta http-equiv="content-type" content="text/html; charset=utf-8" /> <head> <title>Tester</title> <script type="text/javascript" src="//ajax.googleapis.com/ajax/libs/jquery/1.7.1/jquery.min.js"></script> <script type="text/javascript" src="html2canvas.js"></script> <script type="text/javascript" src="jquery.plugin.html2canvas.js"></script> <script src="http://www.google.com/jsapi?key=ABQIAAAAwbkbZLyhsmTCWXbTcjbgbRSzHs7K5SvaUdm8ua-Xxy_-2dYwMxQMhnagaawTo7L1FE1-amhuQxIlXw"></script> <script> google.load("earth", "1"); var ge = null; function init() { google.earth.createInstance("map_canvas", initCallback, failureCallback); } function initCallback(object) { ge = object; ge.getWindow().setVisibility(true); } function failureCallback(object) { } function capture() { $('#target').html2canvas({ onrendered: function (canvas) { //Set hidden field's value to image data (base-64 string) $('#img_val').val(canvas.toDataURL("image/png")); //Submit the form manually document.getElementById("myForm").submit(); } }); } </script> <style type="text/css"> #map_canvas {position: fixed; top: 60px; left: 0px; right:0px; bottom:0px; } #target { border: 1px solid #CCC; margin: 0px; padding:0px; position: absolute; left: 10px;top: 80px;height: 580px; width: 580px; } </style> </head> <body onload='init()' id='body'> <form method="POST" enctype="multipart/form-data" action="save.php" id="myForm"> <input type="hidden" name="img_val" id="img_val" value="" /> </form> <input type="submit" value="Take Screenshot Of Div Below" onclick="capture();" /> <div id="target"> <div id="map_canvas"> </div> </div> </body> </html> This is the php document renders to save.php <?php //Get the base-64 string from data $filteredData=substr($_POST['img_val'], strpos($_POST['img_val'], ",")+1); //Decode the string $unencodedData=base64_decode($filteredData); //Save the image file_put_contents('img.png', $unencodedData); ?> <h2>Save the image and show to user</h2> <table> <tr> <td> <a href="img.png" target="blank"> Click Here to See The Image Saved to Server</a> </td> <td align="right"> <a href="index.php"> Click Here to Go Back</a> </td> </tr> <tr> <td colspan="2"> <br /> <br /> <span> Here is Client-sided image: </span> <br /> <?php //Show the image echo '<img src="'.$_POST['img_val'].'" />'; ?> </td> </tr> </table> <style type="text/css"> body, a, span { font-family: Tahoma; font-size: 10pt; font-weight: bold; } </style> This sample works Correctly . I want to achieve this with above Code using "Google Earth" <!DOCTYPE html> <html> <head> <script src="http://maps.googleapis.com/maps/api/js?key=AIzaSyDY0kkJiTPVd2U7aTOAwhc9ySH6oHxOIYM&sensor=false"></script> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.8.2/jquery.js"></script> <script type="text/javascript" src ="http://code.jquery.com/jquery-1.9.0.min.js"></script> <script type="text/javascript" src="//ajax.googleapis.com/ajax/libs/jquery/1.7.1/jquery.min.js"></script> <script type="text/javascript" src="html2canvas.js"></script> <script type="text/javascript" src="jquery.plugin.html2canvas.js"></script> </script> <script type="text/javascript"> function initialize() { var mapProp = { center:new google.maps.LatLng(51.508742,-0.120850), zoom:5, mapTypeId:google.maps.MapTypeId.ROADMAP }; var map=new google.maps.Map(document.getElementById("googleMap"), mapProp); } google.maps.event.addDomListener(window, 'load', initialize); $(window).load(function(){ $('#load').click(function(){ html2canvas($('#googleMap'), { useCORS: true, onrendered: function (canvas) { var dataUrl= canvas.toDataURL("image/png").replace("image/png", "image/octet-stream"); window.location.href = dataUrl; } }); }); }); </script> </head> <body> <div id="googleMap" style="width:500px;height:380px;"></div> <input type="button" value="Save" id="load"/> </body> </html>

    Read the article

< Previous Page | 338 339 340 341 342 343 344 345 346 347 348 349  | Next Page >