Search Results

Search found 37989 results on 1520 pages for 'software as a service'.

Page 342/1520 | < Previous Page | 338 339 340 341 342 343 344 345 346 347 348 349  | Next Page >

• Enabling Kerberos Authentication for Reporting Services

  - by robcarrol

  Recently, I’ve helped several customers with Kerberos authentication problems with Reporting Services and Analysis Services, so I’ve decided to write this blog post and pull together some useful resources in one place (there are 2 whitepapers in particular that I found invaluable configuring Kerberos authentication, and these can be found in the references section at the bottom of this post). In most of these cases, the problem has manifested itself with the Login failed for User ‘NT Authority\Anonymous’ (“double-hop”) error. By default, Reporting Services uses Windows Integrated Authentication, which includes the Kerberos and NTLM protocols for network authentication. Additionally, Windows Integrated Authentication includes the negotiate security header, which prompts the client to select Kerberos or NTLM for authentication. The client can access reports which have the appropriate permissions by using Kerberos for authentication. Servers that use Kerberos authentication can impersonate those clients and use their security context to access network resources. You can configure Reporting Services to use both Kerberos and NTLM authentication; however this may lead to a failure to authenticate. With negotiate, if Kerberos cannot be used, the authentication method will default to NTLM. When negotiate is enabled, the Kerberos protocol is always used except when: Clients/servers that are involved in the authentication process cannot use Kerberos. The client does not provide the information necessary to use Kerberos. An in-depth discussion of Kerberos authentication is beyond the scope of this post, however when users execute reports that are configured to use Windows Integrated Authentication, their logon credentials are passed from the report server to the server hosting the data source. Delegation needs to be set on the report server and Service Principle Names (SPNs) set for the relevant services. When a user processes a report, the request must go through a Web server on its way to a database server for processing. Kerberos authentication enables the Web server to request a service ticket from the domain controller; impersonate the client when passing the request to the database server; and then restrict the request based on the user’s permissions. Each time a server is required to pass the request to another server, the same process must be used. Kerberos authentication is supported in both native and SharePoint integrated mode, but I’ll focus on native mode for the purpose of this post (I’ll explain configuring SharePoint integrated mode and Kerberos authentication in a future post). Configuring Kerberos avoids the authentication failures due to double-hop issues. These double-hop errors occur when a users windows domain credentials can’t be passed to another server to complete the user’s request. In the case of my customers, users were executing Reporting Services reports that were configured to query Analysis Services cubes on a separate machine using Windows Integrated security. The double-hop issue occurs as NTLM credentials are valid for only one network hop, subsequent hops result in anonymous authentication. The client attempts to connect to the report server by making a request from a browser (or some other application), and the connection process begins with authentication. With NTLM authentication, client credentials are presented to Computer 2. However Computer 2 can’t use the same credentials to access Computer 3 (so we get the Anonymous login error). To access Computer 3 it is necessary to configure the connection string with stored credentials, which is what a number of customers I have worked with have done to workaround the double-hop authentication error. However, to get the benefits of Windows Integrated security, a better solution is to enable Kerberos authentication. Again, the connection process begins with authentication. With Kerberos authentication, the client and the server must demonstrate to one another that they are genuine, at which point authentication is successful and a secure client/server session is established. In the illustration above, the tiers represent the following: Client tier (computer 1): The client computer from which an application makes a request. Middle tier (computer 2): The Web server or farm where the client’s request is directed. Both the SharePoint and Reporting Services server(s) comprise the middle tier (but we’re only concentrating on native deployments just now). Back end tier (computer 3): The Database/Analysis Services server/Cluster where the requested data is stored. In order to enable Kerberos authentication for Reporting Services it’s necessary to configure the relevant SPNs, configure trust for delegation for server accounts, configure Kerberos with full delegation and configure the authentication types for Reporting Services. Service Principle Names (SPNs) are unique identifiers for services and identify the account’s type of service. If an SPN is not configured for a service, a client account will be unable to authenticate to the servers using Kerberos. You need to be a domain administrator to add an SPN, which can be added using the SetSPN utility. For Reporting Services in native mode, the following SPNs need to be registered --SQL Server Service SETSPN -S mssqlsvc/servername:1433 Domain\SQL For named instances, or if the default instance is running under a different port, then the specific port number should be used. --Reporting Services Service SETSPN -S http/servername Domain\SSRS SETSPN -S http/servername.domain.com Domain\SSRS The SPN should be set for the NETBIOS name of the server and the FQDN. If you access the reports using a host header or DNS alias, then that should also be registered SETSPN -S http/www.reports.com Domain\SSRS --Analysis Services Service SETSPN -S msolapsvc.3/servername Domain\SSAS Next, you need to configure trust for delegation, which refers to enabling a computer to impersonate an authenticated user to services on another computer: Location Description Client 1. The requesting application must support the Kerberos authentication protocol. 2. The user account making the request must be configured on the domain controller. Confirm that the following option is not selected: Account is sensitive and cannot be delegated. Servers 1. The service accounts must be trusted for delegation on the domain controller. 2. The service accounts must have SPNs registered on the domain controller. If the service account is a domain user account, the domain administrator must register the SPNs. In Active Directory Users and Computers, verify that the domain user accounts used to access reports have been configured for delegation (the ‘Account is sensitive and cannot be delegated’ option should not be selected): We then need to configure the Reporting Services service account and computer to use Kerberos with full delegation:   We also need to do the same for the SQL Server or Analysis Services service accounts and computers (depending on what type of data source you are connecting to in your reports). Finally, and this is the part that sometimes gets over-looked, we need to configure the authentication type correctly for reporting services to use Kerberos authentication. This is configured in the Authentication section of the RSReportServer.config file on the report server. <Authentication> <AuthenticationTypes>           <RSWindowsNegotiate/> </AuthenticationTypes> <EnableAuthPersistence>true</EnableAuthPersistence> </Authentication> This will enable Kerberos authentication for Internet Explorer. For other browsers, see the link below. The report server instance must be restarted for these changes to take effect. Once these changes have been made, all that’s left to do is test to make sure Kerberos authentication is working properly by running a report from report manager that is configured to use Windows Integrated authentication (either connecting to Analysis Services or SQL Server back-end). Resources: Manage Kerberos Authentication Issues in a Reporting Services Environment http://download.microsoft.com/download/B/E/1/BE1AABB3-6ED8-4C3C-AF91-448AB733B1AF/SSRSKerberos.docx Configuring Kerberos Authentication for Microsoft SharePoint 2010 Products http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=23176 How to: Configure Windows Authentication in Reporting Services http://msdn.microsoft.com/en-us/library/cc281253.aspx RSReportServer Configuration File http://msdn.microsoft.com/en-us/library/ms157273.aspx#Authentication Planning for Browser Support http://msdn.microsoft.com/en-us/library/ms156511.aspx

  Read the article

• EM12c Release 4: New EMCLI Verbs

  - by SubinDaniVarughese

  Here are the new EM CLI verbs in Enterprise Manager 12c Release 4 (12.1.0.4). This helps you in writing new scripts or enhancing your existing scripts for further automation. Basic Administration Verbs invoke_ws - Invoke EM web service.ADM Verbs associate_target_to_adm - Associate a target to an application data model. export_adm - Export Application Data Model to a specified .xml file. import_adm - Import Application Data Model from a specified .xml file. list_adms - List the names, target names and application suites of existing Application Data Models verify_adm - Submit an application data model verify job for the target specified.Agent Update Verbs get_agent_update_status -  Show Agent Update Results get_not_updatable_agents - Shows Not Updatable Agents get_updatable_agents - Show Updatable Agents update_agents - Performs Agent Update Prereqs and submits Agent Update JobBI Publisher Reports Verbs grant_bipublisher_roles - Grants access to the BI Publisher catalog and features. revoke_bipublisher_roles - Revokes access to the BI Publisher catalog and features.Blackout Verbs create_rbk - Create a Retro-active blackout.CFW Verbs cancel_cloud_service_requests -  To cancel cloud service requests delete_cloud_service_instances -  To delete cloud service instances delete_cloud_user_objects - To delete cloud user objects. get_cloud_service_instances - To get information about cloud service instances get_cloud_service_requests - To get information about cloud requests get_cloud_user_objects - To get information about cloud user objects.Chargeback Verbs add_chargeback_entity - Adds the given entity to Chargeback. assign_charge_plan - Assign a plan to a chargeback entity. assign_cost_center - Assign a cost center to a chargeback entity. create_charge_entity_type - Create  charge entity type export_charge_plans - Exports charge plans metadata to file export_custom_charge_items -  Exports user defined charge items to a file import_charge_plans - Imports charge plans metadata from given file import_custom_charge_items -  Imports user defined charge items metadata from given file list_charge_plans - Gives a list of charge plans in Chargeback. list_chargeback_entities - Gives a list of all the entities in Chargeback list_chargeback_entity_types - Gives a list of all the entity types that are supported in Chargeback list_cost_centers - Lists the cost centers in Chargeback. remove_chargeback_entity - Removes the given entity from Chargeback. unassign_charge_plan - Un-assign the plan associated to a chargeback entity. unassign_cost_center - Un-assign the cost center associated to a chargeback entity.Configuration/Association History disable_config_history - Disable configuration history computation for a target type. enable_config_history - Enable configuration history computation for a target type. set_config_history_retention_period - Sets the amount of time for which Configuration History is retained.ConfigurationCompare config_compare - Submits the configuration comparison job get_config_templates - Gets all the comparison templates from the repositoryCompliance Verbs fix_compliance_state -  Fix compliance state by removing references in deleted targets.Credential Verbs update_credential_setData Subset Verbs export_subset_definition - Exports specified subset definition as XML file at specified directory path. generate_subset - Generate subset using specified subset definition and target database. import_subset_definition - Import a subset definition from specified XML file. import_subset_dump - Imports dump file into specified target database. list_subset_definitions - Get the list of subset definition, adm and target nameDelete pluggable Database Job Verbs delete_pluggable_database - Delete a pluggable databaseDeployment Procedure Verbs get_runtime_data - Get the runtime data of an executionDiscover and Push to Agents Verbs generate_discovery_input - Generate Discovery Input file for discovering Auto-Discovered Domains refresh_fa - Refresh Fusion Instance run_fa_diagnostics - Run Fusion Applications DiagnosticsFusion Middleware Provisioning Verbs create_fmw_domain_profile - Create a Fusion Middleware Provisioning Profile from a WebLogic Domain create_fmw_home_profile - Create a Fusion Middleware Provisioning Profile from an Oracle Home create_inst_media_profile - Create a Fusion Middleware Provisioning Profile from Installation MediaGold Agent Image Verbs create_gold_agent_image - Creates a gold agent image. decouple_gold_agent_image - Decouples the agent from gold agent image. delete_gold_agent_image - Deletes a gold agent image. get_gold_agent_image_activity_status -  Gets gold agent image activity status. get_gold_agent_image_details - Get the gold agent image details. list_agents_on_gold_image - Lists agents on a gold agent image. list_gold_agent_image_activities - Lists gold agent image activities. list_gold_agent_image_series - Lists gold agent image series. list_gold_agent_images - Lists the available gold agent images. promote_gold_agent_image - Promotes a gold agent image. stage_gold_agent_image - Stages a gold agent image.Incident Rules Verbs add_target_to_rule_set - Add a target to an enterprise rule set. delete_incident_record - Delete one or more open incidents remove_target_from_rule_set - Remove a target from an enterprise rule set. Job Verbs export_jobs - Export job details in to an xml file import_jobs - Import job definitions from an xml file job_input_file - Supply details for a job verb in a property file resume_job - Resume a job or set of jobs suspend_job - Suspend a job or set of jobs Oracle Database as Service Verbs config_db_service_target - Configure DB Service target for OPCPrivilege Delegation Settings Verbs clear_default_privilege_delegation_setting - Clears the default privilege delegation setting for a given list of platforms set_default_privilege_delegation_setting - Sets the default privilege delegation setting for a given list of platforms test_privilege_delegation_setting - Tests a Privilege Delegation Setting on a hostSSA Verbs cleanup_dbaas_requests - Submit cleanup request for failed request create_dbaas_quota - Create Database Quota for a SSA User Role create_service_template - Create a Service Template delete_dbaas_quota - Delete the Database Quota setup for a SSA User Role delete_service_template - Delete a given service template get_dbaas_quota - List the Database Quota setup for all SSA User Roles get_dbaas_request_settings - List the Database Request Settings get_service_template_detail - Get details of a given service template get_service_templates -  Get the list of available service templates rename_service_template -  Rename a given service template update_dbaas_quota - Update the Database Quota for a SSA User Role update_dbaas_request_settings - Update the Database Request Settings update_service_template -  Update a given service template. SavedConfigurations get_saved_configs  - Gets the saved configurations from the repository Server Generated Alert Metric Verbs validate_server_generated_alerts  - Server Generated Alert Metric VerbServices Verbs edit_sl_rule - Edit the service level rule for the specified serviceSiebel Verbs list_siebel_enterprises -  List Siebel enterprises currently monitored in EM list_siebel_servers -  List Siebel servers under a specified siebel enterprise update_siebel- Update a Siebel enterprise or its underlying serversSiteGuard Verbs add_siteguard_aux_hosts -  Associate new auxiliary hosts to the system configure_siteguard_lag -  Configure apply lag and transport lag limit for databases delete_siteguard_aux_host -  Delete auxiliary host associated with a site delete_siteguard_lag -  Erases apply lag or transport lag limit for databases get_siteguard_aux_hosts -  Get all auxiliary hosts associated with a site get_siteguard_health_checks -  Shows schedule of health checks get_siteguard_lag -  Shows apply lag or transport lag limit for databases schedule_siteguard_health_checks -  Schedule health checks for an operation plan stop_siteguard_health_checks -  Stops all future health check execution of an operation plan update_siteguard_lag -  Updates apply lag and transport lag limit for databasesSoftware Library Verbs stage_swlib_entity_files -  Stage files of an entity from Software Library to a host target.Target Data Verbs create_assoc - Creates target associations delete_assoc - Deletes target associations list_allowed_pairs - Lists allowed association types for specified source and destination list_assoc - Lists associations between source and destination targets manage_agent_partnership - Manages partnership between agents. Used for explicitly assigning agent partnershipsTrace Reports generate_ui_trace_report  -  Generate and download UI Page performance report (to identify slow rendering pages)VI EMCLI Verbs add_virtual_platform - Add Oracle Virtual PLatform(s). modify_virtual_platform - Modify Oracle Virtual Platform.To get more details about each verb, execute$ emcli help <verb_name>Example: $ emcli help list_assocNew resources in list verbThese are the new resources in EM CLI list verb :Certificates  WLSCertificateDetails Credential Resource Group  PreferredCredentialsDefaultSystemScope - Preferred credentials (System Scope)   PreferredCredentialsSystemScope - Target preferred credentialPrivilege Delegation Settings  TargetPrivilegeDelegationSettingDetails  - List privilege delegation setting details on a host  TargetPrivilegeDelegationSetting - List privilege delegation settings on a host   PrivilegeDelegationSettings  - Lists all Privilege Delegation Settings   PrivilegeDelegationSettingDetails - Lists details of  Privilege Delegation Settings To get more details about each resource, execute$ emcli list -resource="<resource_name>" -helpExample: $ emcli list -resource="PrivilegeDelegationSettings" -helpDeprecated Verbs:Agent Administration Verbs resecure_agent - Resecure an agentTo get the complete list of verbs, execute:$ emcli help Stay Connected: Twitter | Facebook | YouTube | Linkedin | Newsletter Download the Oracle Enterprise Manager 12c Mobile app

  Read the article

• More Great Improvements to the Windows Azure Management Portal

  - by ScottGu

  Over the last 3 weeks we’ve released a number of enhancements to the new Windows Azure Management Portal.  These new capabilities include: Localization Support for 6 languages Operation Log Support Support for SQL Database Metrics Virtual Machine Enhancements (quick create Windows + Linux VMs) Web Site Enhancements (support for creating sites in all regions, private github repo deployment) Cloud Service Improvements (deploy from storage account, configuration support of dedicated cache) Media Service Enhancements (upload, encode, publish, stream all from within the portal) Virtual Networking Usability Enhancements Custom CNAME support with Storage Accounts All of these improvements are now live in production and available to start using immediately.  Below are more details on them: Localization Support The Windows Azure Portal now supports 6 languages – English, German, Spanish, French, Italian and Japanese. You can easily switch between languages by clicking on the Avatar bar on the top right corner of the Portal: Selecting a different language will automatically refresh the UI within the portal in the selected language: Operation Log Support The Windows Azure Portal now supports the ability for administrators to review the “operation logs” of the services they manage – making it easy to see exactly what management operations were performed on them.  You can query for these by selecting the “Settings” tab within the Portal and then choosing the “Operation Logs” tab within it.  This displays a filter UI that enables you to query for operations by date and time: As of the most recent release we now show logs for all operations performed on Cloud Services and Storage Accounts.  You can click on any operation in the list and click the “Details” button in the command bar to retrieve detailed status about it.  This now makes it possible to retrieve details about every management operation performed. In future updates you’ll see us extend the operation log capability to apply to all Windows Azure Services – which will enable great post-mortem and audit support. Support for SQL Database Metrics You can now monitor the number of successful connections, failed connections and deadlocks in your SQL databases using the new “Dashboard” view provided on each SQL Database resource: Additionally, if the database is added as a “linked resource” to a Web Site or Cloud Service, monitoring metrics for the linked SQL database are shown along with the Web Site or Cloud Service metrics in the dashboard. This helps with viewing and managing aggregated information across both resources in your application. Enhancements to Virtual Machines The most recent Windows Azure Portal release brings with it some nice usability improvements to Virtual Machines: Integrated Quick Create experience for Windows and Linux VMs Creating a new Windows or Linux VM is now easy using the new “Quick Create” experience in the Portal: In addition to Windows VM templates you can also now select Linux image templates in the quick create UI: This makes it incredibly easy to create a new Virtual Machine in only a few seconds. Enhancements to Web Sites Prior to this past month’s release, users were forced to choose a single geographical region when creating their first site.  After that, subsequent sites could only be created in that same region.  This restriction has now been removed, and you can now create sites in any region at any time and have up to 10 free sites in each supported region: One of the new regions we’ve recently opened up is the “East Asia” region.  This allows you to now deploy sites to North America, Europe and Asia simultaneously.  Private GitHub Repository Support This past week we also enabled Git based continuous deployment support for Web Sites from private GitHub and BitBucket repositories (previous to this you could only enable this with public repositories).  Enhancements to Cloud Services Experience The most recent Windows Azure Portal release brings with it some nice usability improvements to Cloud Services: Deploy a Cloud Service from a Windows Azure Storage Account The Windows Azure Portal now supports deploying an application package and configuration file stored in a blob container in Windows Azure Storage. The ability to upload an application package from storage is available when you custom create, or upload to, or update a cloud service deployment. To upload an application package and configuration, create a Cloud Service, then select the file upload dialog, and choose to upload from a Windows Azure Storage Account: To upload an application package from storage, click the “FROM STORAGE” button and select the application package and configuration file to use from the new blob storage explorer in the portal. Configure Windows Azure Caching in a caching enabled cloud service If you have deployed the new dedicated cache within a cloud service role, you can also now configure the cache settings in the portal by navigating to the configuration tab of for your Cloud Service deployment. The configuration experience is similar to the one in Visual Studio when you create a cloud service and add a caching role.  The portal now allows you to add or remove named caches and change the settings for the named caches – all from within the Portal and without needing to redeploy your application. Enhancements to Media Services You can now upload, encode, publish, and play your video content directly from within the Windows Azure Portal.  This makes it incredibly easy to get started with Windows Azure Media Services and perform common tasks without having to write any code. Simply navigate to your media service and then click on the “Content” tab.  All of the media content within your media service account will be listed here: Clicking the “upload” button within the portal now allows you to upload a media file directly from your computer: This will cause the video file you chose from your local file-system to be uploaded into Windows Azure.  Once uploaded, you can select the file within the content tab of the Portal and click the “Encode” button to transcode it into different streaming formats: The portal includes a number of pre-set encoding formats that you can easily convert media content into: Once you select an encoding and click the ok button, Windows Azure Media Services will kick off an encoding job that will happen in the cloud (no need for you to stand-up or configure a custom encoding server).  When it’s finished, you can select the video in the “Content” tab and then click PUBLISH in the command bar to setup an origin streaming end-point to it: Once the media file is published you can point apps against the public URL and play the content using Windows Azure Media Services – no need to setup or run your own streaming server.  You can also now select the file and click the “Play” button in the command bar to play it using the streaming endpoint directly within the Portal: This makes it incredibly easy to try out and use Windows Azure Media Services and test out an end-to-end workflow without having to write any code.  Once you test things out you can of course automate it using script or code – providing you with an incredibly powerful Cloud Media platform that you can use. Enhancements to Virtual Network Experience Over the last few months, we have received feedback on the complexity of the Virtual Network creation experience. With these most recent Portal updates, we have added a Quick Create experience that makes the creation experience very simple. All that an administrator now needs to do is to provide a VNET name, choose an address space and the size of the VNET address space. They no longer need to understand the intricacies of the CIDR format or walk through a 4-page wizard or create a VNET / subnet. This makes creating virtual networks really simple: The portal also now has a “Register DNS Server” task that makes it easy to register DNS servers and associate them with a virtual network. Enhancements to Storage Experience The portal now lets you register custom domain names for your Windows Azure Storage Accounts.  To enable this, select a storage resource and then go to the CONFIGURE tab for a storage account, and then click MANAGE DOMAIN on the command bar: Clicking “Manage Domain” will bring up a dialog that allows you to register any CNAME you want: Summary The above features are all now live in production and available to use immediately.  If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using them today.  Visit the Windows Azure Developer Center to learn more about how to build apps with it. One of the other cool features that is now live within the portal is our new Windows Azure Store – which makes it incredibly easy to try and purchase developer services from a variety of partners.  It is an incredibly awesome new capability – and something I’ll be doing a dedicated post about shortly. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

  Read the article

• JavaOne Session Report: “50 Tips in 50 Minutes for GlassFish Fans”

  - by Janice J. Heiss

  At JavaOne 2012 on Monday, Oracle’s Engineer Chris Kasso, and Technology Evangelist Arun Gupta, presented a head-spinning session (CON4701) in which they offered 50 tips for GlassFish fans. Kasso and Gupta alternated back and forth with each presenting 10 tips at a time. An audience of about (appropriately) 50 attentive and appreciative developers was on hand in what has to be one of the most information-packed sessions ever at JavaOne!Aside: I experienced one of the quiet joys of JavaOne when, just before the session began, I spotted Java Champion and JavaOne Rock Star Adam Bien sitting nearby – Adam is someone I have been fortunate to know for many years.GlassFish is a freely available, commercially supported Java EE reference implementation. The session prioritized quantity of tips over depth of information and offered tips that are intended for both seasoned and new users, that are meant to increase the range of functional options available to GlassFish users. The focus was on lesser-known dimensions of GlassFish. Attendees were encouraged to pursue tips that contained new information for them. All 50 tips can be accessed here.Below are several examples of more elaborate tips and a final practical tip on how to get in touch with these folks. Tip #1: Using the login Command * To execute a remote command with asadmin you must provide the admin's user name and password.* The login command allows you to store the login credentials to be reused in subsequent commands.* Can be logged into multiple servers (distinguish by host and port). Example:     % asadmin --host ouch login     Enter admin user name [default: admin]>     Enter admin password>     Login information relevant to admin user name [admin]     for host [ouch] and admin port [4848] stored at     [/Users/ckasso/.asadminpass] successfully.     Make sure that this file remains protected.     Information stored in this file will be used by     asadmin commands to manage the associated domain.     Command login executed successfully.     % asadmin --host ouch list-clusters     c1 not running     Command list-clusters executed successfully.Tip #4: Using the AS_DEBUG Env Variable* Environment variable to control client side debug output* Exposes: command processing info URL used to access the command:                           http://localhost:4848/__asadmin/uptime Raw response from the server Example:   % export AS_DEBUG=true  % asadmin uptime  CLASSPATH= ./../glassfish/modules/admin-cli.jar  Commands: [uptime]  asadmin extension directory: /work/gf-3.1.2/glassfish3/glassfish/lib/asadm      ------- RAW RESPONSE  ---------   Signature-Version: 1.0   message: Up 7 mins 10 secs   milliseconds_value: 430194   keys: milliseconds   milliseconds_name: milliseconds   use-main-children-attribute: false   exit-code: SUCCESS  ------- RAW RESPONSE  ---------Tip #11: Using Password Aliases * Some resources require a password to access (e.g. DB, JMS, etc.).* The resource connector is defined in the domain.xml.Example:Suppose the DB resource you wish to access requires an entry like this in the domain.xml:     <property name="password" value="secretp@ssword"/>But company policies do not allow you to store the password in the clear.* Use password aliases to avoid storing the password in the domain.xml* Create a password alias:     % asadmin create-password-alias DB_pw_alias     Enter the alias password>     Enter the alias password again>     Command create-password-alias executed successfully.* The password is stored in domain's encrypted keystore.* Now update the password value in the domain.xml:     <property name="password" value="${ALIAS=DB_pw_alias}"/>Tip #21: How to Start GlassFish as a Service * Configuring a server to automatically start at boot can be tedious.* Each platform does it differently.* The create-service command makes this easy.   Windows: creates a Windows service Linux: /etc/init.d script Solaris: Service Management Facility (SMF) service * Must execute create-service with admin privileges.* Can be used for the DAS or instances* Try it first with the --dry-run option.* There is a (unsupported) _delete-serverExample:     # asadmin create-service domain1     The Service was created successfully. Here are the details:     Name of the service:application/GlassFish/domain1     Type of the service:Domain     Configuration location of the service:/work/gf-3.1.2.2/glassfish3/glassfish/domains     Manifest file location on the system:/var/svc/manifest/application/GlassFish/domain1_work_gf-3.1.2.2_glassfish3_glassfish_domains/Domain-service-smf.xml.     You have created the service but you need to start it yourself. Here are the most typical Solaris commands of interest:     * /usr/bin/svcs  -a | grep domain1  // status     * /usr/sbin/svcadm enable domain1 // start     * /usr/sbin/svcadm disable domain1 // stop     * /usr/sbin/svccfg delete domain1 // uninstallTip #34: Posting a Command via REST* Use wget/curl to execute commands on the DAS.Example:  Deploying an application   % curl -s -S \       -H 'Accept: application/json' -X POST \       -H 'X-Requested-By: anyvalue' \       -F id=@/path/to/application.war \       -F force=true http://localhost:4848/management/domain/applications/application* Use @ before a file name to tell curl to send the file's contents.* The force option tells GlassFish to force the deployment in case the application is already deployed.* Use wget/curl to execute commands on the DAS.Example:  Deploying an application   % curl -s -S \       -H 'Accept: application/json' -X POST \       -H 'X-Requested-By: anyvalue' \       -F id=@/path/to/application.war \       -F force=true http://localhost:4848/management/domain/applications/application* Use @ before a file name to tell curl to send the file's contents.* The force option tells GlassFish to force the deployment in case the application is already deployed.Tip #46: Upgrading to a Newer Version * Upgrade applications and configuration from an earlier version* Upgrade Tool: Side-by-side upgrade– GUI: asupgrade– CLI: asupgrade --c– What happens ?* Copies older source domain -> target domain directory* asadmin start-domain --upgrade* Update Tool and pkg: In-place upgrade– GUI: updatetool, install all Available Updates– CLI: pkg image-update– Upgrade the domain* asadmin start-domain --upgradeTip #50: How to reach us?* GlassFish Forum: http://www.java.net/forums/glassfish/glassfish* [email protected]* @glassfish* facebook.com/glassfish* youtube.com/GlassFishVideos* blogs.oracle.com/theaquariumArun Gupta acknowledged that their method of presentation was experimental and actively solicited feedback about the session. The best way to reach them is on the GlassFish user forum.In addition, check out Gupta’s new book Java EE 6 Pocket Guide.

  Read the article

• What are the requirements to consider someone as a Software Engineer? Is it just a job title? [close

  - by mike

  I am employed as a Software Engineer with a background in C# and .NET. I am trying to interface with an web API. I asked for help because I didn't know to connect to it or handle the results. Someone told me that I shouldn't consider myself a Software Engineer because I didn't know to how to do it. They said the API was well documented, required no authentication, and returned XML that I could easily parse. They said the documentation should be enough to figure out how to use the API. Isn't having a job title of Software Engineer the only consideration for being a Software Engineer?

  Read the article

• Release Management as Orchestra

  - by ericajanine

  I read an excellent, concise article (http://www.buildmeister.com/articles/software_release_management_best_practices) on the basics of release management practices. In the article, it states "Release Management is often likened to the conductor of an orchestra, with the individual changes to be implemented the various instruments within it." I played in music ensembles for years, so this is especially close to my heart as example. I learned most of my discipline from hours and hours of practice at the hand of a very skilled conductor and leader. I also learned that the true magic in symphonic performance is one where everyone involved is focused on one sound, one goal. In turn, that solid focus creates a sound and experience bigger than just mechanics alone accomplish. In symphony, a conductor's true purpose is to make you, a performer, better so the overall sound and end product is better. The big picture (the performance of the composition) is the end-game, and all musicians in the orchestra know without question their part makes up an important but incomplete piece of that performance. A good conductor works with each section (e.g. group) to ensure their individual pieces are solid. Let's restate: The conductor leads and is responsible for ensuring those pieces are solid. While the performers themselves are doing the work, the conductor is the final authority on when the pieces are ready or not. If not, the conductor initiates the efforts to get them ready or makes the decision to scrap their parts altogether for the sake of an overall performance. Let it sink in, because it's clear--It is not the performer's call if they play their part as agreed, it's the conductor's final call to allow it. In comparison, if a software release manager is a conductor, the only way for that manager to be effective is to drive the overarching process and execution of individual pieces of a software development lifecycle. It does not mean the release manager performs each and every piece, it means the release manager has oversight and influence because the end-game is a successful software enhancin a useable environment. It means the release manager, not the developer or development manager, has the final call if something goes into a software release. Of course, this is not a process of autocracy or dictation of absolute rule, it's cooperative effort. But the release manager must have the final authority to make a decision if something is ready to be added to the bigger piece, the overall symphony of software changes being considered for package and release. It also goes without saying a release manager, like a conductor, must have full autonomy and isolation from other software groups. A conductor is the one on the podium waving a little stick at the each section and cueing them for their parts, not yelling from the back of the room while also playing a tuba and taking direction from the horn section. I have personally seen where release managers are relegated to being considered little more than coordinators, red-tapers to "satisfy" the demands of an audit group without being bothered to actually respect all that a release manager gives a group willing to employ them fully. In this dysfunctional scenario, development managers, project managers, business users, and other stakeholders have been given nearly full clearance to demand and push their agendas forward, causing a tail-wagging-the-dog scenario where an inherent conflict will ensue. Depending on the strength, determination for peace, and willingness to overlook a built-in expectation that is wrong, the release manager here must face the crafted conflict head-on and diffuse it as quickly as possible. Then, the release manager must clearly make a case why a change cannot be released without negative impact to all parties involved. If a political agenda is solely driving a software release, there IS no symphony, there is no "software lifecycle". It's just out-of-tune noise. More importantly, there is no real conductor. Sometimes, just wanting to make a beautiful sound is not enough. If you are a release manager, are you freed up enough to move, to conduct the sections of software creation to ensure a solid release performance is possible? If not, it's time to take stock in what your role actually is and see if that is what you truly want to achieve in your position. If you are, then you can successfully build your career and that of the people in your groups to create truly beautiful software (music) together.

  Read the article

• Windows Workflow Foundation (WF) and things I were more intuitive

  - by pjohnson

  I've started using Windows Workflow Foundation, and so far ran into a few things that aren't incredibly obvious. Microsoft did a good job of providing a ton of samples, which is handy because you need them to get anywhere with WF. The docs are thin, so I've been bouncing between samples and downloadable labs to figure out how to implement various activities in a workflow. Code separation or not? You can create a workflow and activity in Visual Studio with or without code separation, i.e. just a .cs "Component" style object with a Designer.cs file, or a .xoml XML markup file with code behind (beside?) it. Absence any obvious advantage to one or the other, I used code separation for workflows and any complex custom activities, and without code separation for custom activities that just inherit from the Activity class and thus don't have anything special in the designer. So far, so good. Service - In the WF world, this is simply a class that talks to the workflow about things outside the workflow, not to be confused with how the term "service" is used in every other context I've seen in the Windows and .NET world, i.e. an executable that waits for events or requests from a client and services them (Windows service, web service, WCF service, etc.). ListenActivity - Such a great concept, yet so unintuitive. It seems you need at least two branches (EventDrivenActivity instances), one for your positive condition and one for a timeout. The positive condition has a HandleExternalEventActivity, and the timeout has a DelayActivity followed by however you want to handle the delay, e.g. a ThrowActivity. The timeout is simple enough; wiring up the HandleExternalEventActivity is where things get fun. You need to create a service (see above), and an interface for that service (this seems more complex than should be necessary--why not have activities just wire to a service directly?). And you need to create a custom EventArgs class that inherits from ExternalDataEventArgs--you can't create an ExternalDataEventArgs event handler directly, even if you don't need to add any more information to the event args, despite ExternalDataEventArgs not being marked as an abstract class, nor a compiler error nor warning nor any other indication that you're doing something wrong, until you run it and find that it always times out and get to check every place mentioned here to see why. Your interface and service need an event that consumes your custom EventArgs class, and a method to fire that event. You need to call that method from somewhere. Then you get to hope that you did everything just right, or that you can step through code in the debugger before your Delay timeout expires. Yes, it's as much fun as it sounds. TransactionScopeActivity - I had the bright idea of putting one in as a placeholder, then filling in the database updates later. That caused this error: The workflow hosting environment does not have a persistence service as required by an operation on the workflow instance "[GUID]". ...which is about as helpful as "Object reference not set to an instance of an object" and even more fun to debug. Google led me to this Microsoft Forums hit, and from there I figured out it didn't like that the activity had no children. Again, a Validator on TransactionScopeActivity would have pointed this out to me at design time, rather than handing me a nearly useless error at runtime. Easily enough, I disabled the activity and that fixed it. I still see huge potential in my work where WF could make things easier and more flexible, but there are some seriously rough edges at the moment. Maybe I'm just spoiled by how much easier and more intuitive development elsewhere in the .NET Framework is.

  Read the article

• Can't add repos after upgrading to 12.04 LTS

  - by joao

  I'm a complete Linux newbie. I've just upgraded from 10.04 to 12.04 LTS and all sorts of things have started to go wrong. One main problem is the fact that I can't add repos. Example: sudo add-apt-repository ppa:team-xbmc outputs: Traceback (most recent call last): File "/usr/bin/add-apt-repository", line 8, in <module> from softwareproperties.SoftwareProperties import SoftwareProperties File "/usr/lib/python2.7/dist-packages/softwareproperties/SoftwareProperties.py", line 53, in <module> from ppa import AddPPASigningKeyThread, expand_ppa_line File "/usr/lib/python2.7/dist-packages/softwareproperties/ppa.py", line 27, in <module> import pycurl ImportError: librtmp.so.0: cannot open shared object file: No such file or directory /etc/apt/sources.list # deb cdrom:[Ubuntu 10.04.1 LTS _Lucid Lynx_ - Release i386 (20100816.1)]/ lucid main restricted # deb cdrom:[Ubuntu 10.04.1 LTS _Lucid Lynx_ - Release i386 (20100816.1)]/ maverick main restricted # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://archive.ubuntu.com/ubuntu precise main restricted deb-src http://archive.ubuntu.com/ubuntu precise main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://archive.ubuntu.com/ubuntu precise-updates main restricted deb-src http://archive.ubuntu.com/ubuntu precise-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://archive.ubuntu.com/ubuntu precise universe deb-src http://archive.ubuntu.com/ubuntu precise universe deb http://archive.ubuntu.com/ubuntu precise-updates universe deb-src http://archive.ubuntu.com/ubuntu precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://archive.ubuntu.com/ubuntu precise multiverse deb-src http://archive.ubuntu.com/ubuntu precise multiverse deb http://archive.ubuntu.com/ubuntu precise-updates multiverse deb-src http://archive.ubuntu.com/ubuntu precise-updates multiverse ## Uncomment the following two lines to add software from the 'backports' ## repository. ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. # deb-src http://pt.archive.ubuntu.com/ubuntu/ lucid-backports main restricted universe multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. # deb http://archive.canonical.com/ubuntu lucid partner # deb-src http://archive.canonical.com/ubuntu lucid partner deb http://archive.ubuntu.com/ubuntu precise-security main restricted deb-src http://archive.ubuntu.com/ubuntu precise-security main restricted deb http://archive.ubuntu.com/ubuntu precise-security universe deb-src http://archive.ubuntu.com/ubuntu precise-security universe deb http://archive.ubuntu.com/ubuntu precise-security multiverse deb-src http://archive.ubuntu.com/ubuntu precise-security multiverse # deb http://ppa.launchpad.net/stebbins/handbrake-snapshots/ubuntu precise main # disabled on upgrade to precise I have no clue what do do next. Should I just scrap this installation and start from scratch or is this fixable? librtmp.so.0 also shows up in error logs I've started to get from XBMC (I'm not sure if this is relevant info). Thanks in advance for any help you can give me!

  Read the article

• Implementing a modern web application with Web API on top of old services

  - by Gaui

  My company has many WCF services which may or may not be replaced in the near future. The old web application is written in WebForms and communicates straight with these services via SOAP and returns DataTables. Now I am designing a new modern web application in a modern style, an AngularJS client which communicates with an ASP.NET Web API via JSON. The Web API then communicates with the WCF services via SOAP. In the future I want to let the Web API handle all requests and go straight to the database, but because the business logic implemented in the WCF services is complicated it's going to take some time to rewrite and replace it. Now to the problem: I'm trying to make it easy in the near future to replace the WCF services with some other data storage, e.g. another endpoint, database or whatever. I also want to make it easy to unit test the business logic. That's why I have structured the Web API with a repository layer and a service layer. The repository layer has a straight communication with the data storage (WCF service, database, or whatever) and the service layer then uses the repository (Dependency Injection) to get the data. It doesn't care where it gets the data from. Later on I can be in control and structure the data returned from the data storage (DataTable to POCO) and be able to test the logic in the service layer with some mock repository (using Dependency Injection). Below is some code to explain where I'm going with this. But my question is, does this all make sense? Am I making this overly complicated and could this be simplified in any way possible? Does this simplicity make this too complicated to maintain? My main goal is to make it as easy as possible to switch to another data storage later on, e.g. an ORM and be able to test the logic in the service layer. And because the majority of the business logic is implemented in these WCF services (and they return DataTables), I want to be in control of the data and the structure returned to the client. Any advice is greatly appreciated. Update 20/08/14 I created a repository factory, so services would all share repositories. Now it's easy to mock a repository, add it to the factory and create a provider using that factory. Any advice is much appreciated. I want to know if I'm making things more complicated than they should be. So it looks like this: 1. Repository Factory public class RepositoryFactory { private Dictionary<Type, IServiceRepository> repositories; public RepositoryFactory() { this.repositories = new Dictionary<Type, IServiceRepository>(); } public void AddRepository<T>(IServiceRepository repo) where T : class { if (this.repositories.ContainsKey(typeof(T))) { this.repositories.Remove(typeof(T)); } this.repositories.Add(typeof(T), repo); } public dynamic GetRepository<T>() { if (this.repositories.ContainsKey(typeof(T))) { return this.repositories[typeof(T)]; } throw new RepositoryNotFoundException("No repository found for " + typeof(T).Name); } } I'm not very fond of dynamic but I don't know how to retrieve that repository otherwise. 2. Repository and service // Service repository interface // All repository interfaces extend this public interface IServiceRepository { } // Invoice repository interface // Makes it easy to mock the repository later on public interface IInvoiceServiceRepository : IServiceRepository { List<Invoice> GetInvoices(); } // Invoice repository // Connects to some data storage to retrieve invoices public class InvoiceServiceRepository : IInvoiceServiceRepository { public List<Invoice> GetInvoices() { // Get the invoices from somewhere // This could be a WCF, a database, or whatever using(InvoiceServiceClient proxy = new InvoiceServiceClient()) { return proxy.GetInvoices(); } } } // Invoice service // Service that handles talking to a real or a mock repository public class InvoiceService { // Repository factory RepositoryFactory repoFactory; // Default constructor // Default connects to the real repository public InvoiceService(RepositoryFactory repo) { repoFactory = repo; } // Service function that gets all invoices from some repository (mock or real) public List<Invoice> GetInvoices() { // Query the repository return repoFactory.GetRepository<IInvoiceServiceRepository>().GetInvoices(); } }

  Read the article

• Help finding missing mumble-server dependencies

  - by Otoris

  I'm trying to install the mumble-server package using apt-get install mumble-server on Ubuntu 11.10 Server Edition on Rackspace Cloud. Problem is it can't find dependencies it should have found because they exist on launchpad.net? Dependencies message: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: mumble-server : Depends: libavahi-compat-libdnssd1 (>= 0.6.16) but it is not installable Depends: libprotobuf7 but it is not installable Depends: libqt4-dbus (>= 4:4.5.3) but it is not installable Depends: libqt4-network (>= 4:4.5.3) but it is not installable Depends: libqt4-sql (>= 4:4.5.3) but it is not installable Depends: libqt4-xml (>= 4:4.5.3) but it is not installable Depends: libqtcore4 (>= 4:4.7.0~beta1) but it is not installable Depends: libqt4-sql-sqlite but it is not installable E: Unable to correct problems, you have held broken packages. Any ideas on if I might be missing sources? I've been googling around and haven't found anyone else in this situation or anyone else not able to install the aforementioned packages. Thanks for your time! sources.list: deb http://mirror.rackspace.com/ubuntu/ oneiric restricted deb-src http://mirror.rackspace.com/ubuntu/ oneiric restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://mirror.rackspace.com/ubuntu/ oneiric-updates restricted deb-src http://mirror.rackspace.com/ubuntu/ oneiric-updates restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://mirror.rackspace.com/ubuntu/ oneiric universe deb-src http://mirror.rackspace.com/ubuntu/ oneiric universe deb http://mirror.rackspace.com/ubuntu/ oneiric-updates universe deb-src http://mirror.rackspace.com/ubuntu/ oneiric-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://mirror.rackspace.com/ubuntu/ oneiric multiverse deb-src http://mirror.rackspace.com/ubuntu/ oneiric multiverse deb http://mirror.rackspace.com/ubuntu/ oneiric-updates multiverse deb-src http://mirror.rackspace.com/ubuntu/ oneiric-updates multiverse ## Uncomment the following two lines to add software from the 'backports' ## repository. ## N.B. software from this repository may not have been tested as ## extensively as that contained in the release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. # deb http://us.archive.ubuntu.com/ubuntu/ oneiric-backports restricted universe multiverse # deb-src http://us.archive.ubuntu.com/ubuntu/ oneiric-backports restricted universe multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. This software is not part of Ubuntu, but is ## offered by Canonical and the respective vendors as a service to Ubuntu ## users. # deb http://archive.canonical.com/ubuntu oneiric partner # deb-src http://archive.canonical.com/ubuntu oneiric partner deb http://security.ubuntu.com/ubuntu oneiric-security restricted deb-src http://security.ubuntu.com/ubuntu oneiric-security restricted deb http://security.ubuntu.com/ubuntu oneiric-security universe deb-src http://security.ubuntu.com/ubuntu oneiric-security universe deb http://security.ubuntu.com/ubuntu oneiric-security multiverse deb-src http://security.ubuntu.com/ubuntu oneiric-security multiverse # Cool Kid Webmin/Usermin Here Brah deb http://download.webmin.com/download/repository sarge contrib deb http://webmin.mirror.somersettechsolutions.co.uk/repository sarge contrib

  Read the article

• Cloud Apps News @#OOW12

  - by Natalia Rachelson

  All eyes were on Oracle this past week and the news cycle was in full swing. What better time to make some key announcements that were guaranteed to create buzz ... and so we did. The name of the game was Cloud! Here are the key Cloud announcements for Apps, which included Fusion Tap that enables mobility across all Cloud Apps, HCM customer momentum in the Cloud, and our very first ERP Cloud Services customer. Oracle Unveils Oracle Fusion Tap for the iPadOracle Fusion Tap - Productivity Amplified Anywhere, Anytime "Both the enterprise and technology providers must recognize the need to innovate and adapt for the increasing mobility of the workforce - not just for sales teams, but across the organization," said Carter Lusher, Research Fellow and Chief Analyst of Enterprise Applications Ecosystem, Ovum. "A mobile application that quickly and powerfully allows employees to make connections, analyze data, and complete activities at any time and wherever they may be located drives new levels of business value and enhances efficiency. Frankly, mobile access is no longer a 'nice to have' but a 'must have.'"  "The mobile workforce is a business reality, and Oracle Fusion Tap is an example of how Oracle delivers mobile and cloud innovations that fundamentally improve productivity and how we work," said Chris Leone, Senior Vice President of Application Development, Oracle. "With Oracle Fusion Tap users will have an all-in-one, easily extensible app that puts mission-critical data and colleague connection at their fingertips." The entire release is available here http://www.oracle.com/us/corporate/press/1855392 Customers Live on Oracle Fusion Human Capital ManagementOracle HCM Cloud Service Helps Power HR's Contribution to the Business "More than 25 of the 100-plus customers who have selected Oracle Fusion Human Capital Management (HCM) are already live. Ardent Leisure, Peach Aviation, Toshiba Medical Systems and Zillow have deployed Oracle HCM Cloud Service and are using it to transform their HR operations. They join companies such as Principal Financial Group and Elizabeth Arden, who are already using Oracle HCM Cloud Service to help manage international growth and deliver pervasive, role-based, configurable solutions to their employees. With these recent go-lives, Oracle takes a leading position in successfully bringing live HCM customers in the cloud."  "As a technology company, Zillow looked to a partner who could scale with us. Zillow has gone live on Oracle HCM Cloud Service, which will give us the ability automate and streamline HR operations for our employees in the near future," said Sarah Bilton, Senior Director HR, Zillow. Read the entire release here http://www.oracle.com/us/corporate/press/1859573 Lending Club Selects Oracle ERP Cloud Service to Help Increase Insight and EfficienciesOracle ERP Cloud Service Provides an Open Architecture, Best-of-Breed Decision-Making, and Scalability in the Cloud "Lending Club, the leading platform for investing in and obtaining personal loans, has selected Oracle ERP Cloud Service to help improve decision-making and workflow, implement robust reporting, and take advantage of the inherent scalability and cost savings provided by the cloud. With more than 76,000 borrowers and 90,000 investors Lending Club utilizes technology and innovation to reduce the cost of traditional banking and offer borrowers better rates and investors better returns.  After an extensive search, Lending Club selected Oracle ERP Cloud Service due to the breadth and depth of capabilities and ongoing innovation of Oracle ERP Cloud Service, as well as Oracle's open architecture, industry leadership and commitment to partners." "Lending Club is an innovative, data-intensive, high-growth company and we needed a solution and partner that could match us," said Carrie Dolan, CFO, Lending Club. "We conducted a thorough review of our options, and Oracle ERP Cloud Service was the clear winner in terms of capabilities and business value as well as commitment to us as a customer." Read the entire release here http://www.oracle.com/us/corporate/press/1859020

  Read the article

• Dealing with "I-am-cool-and-you-are-dumb" manager [closed]

  - by Software Guy

  I have been working with a software company for about 6 months now. I like the projects I work on there and I really like all the people there except for 1 guy. That guy is technically smart, and he is a co-founder of the company. He is an okay guy in person (the kind you wouldn't want to care about much) but things get tricky when he is your manager. In general I am all okay but there are times when I feel I am not being treated fairly: He doesn't give much thought to when he makes mistakes and when I do something similar, he is super critical. Recently he went as far as to say "I am not sure if I can trust you with this feature". The detais of this specific case are this: I was working on this feature, and I was already a couple of hours over my normal working hours, and then I decided to stop and continue tomorrow. We use git, and I like to commit changes locally and only push when I feel they are ready. This manager insists that I push all the changes to the central repo (in case my hard drive crashes). So I push the change, and the ticket is marked as "to be tested". Next day I come in, he sits next to me and starts complaining and says that I posted above. I really didn't know what to say, I tried to explain to him that the ticket is still being worked upon but he didn't seem to listen. He interrupts me in-between when I am coding, which I do not mind, but when I do that same, his face turns like this :| and reacts as if his work was super important and I am just wasting his time. He asks me to accumulate all questions, and then ask him altogether which is not always possible, as you need a clarification before you can continue on a feature implementation. And when I am coding, he talks on the phone with his customers next to me (when he can go to the meeting room with his laptop) and doesn't care. He made me switch to a whole new IDE (from Netbeans to a commercial IDE costing a lot of money) for a really tiny feature (which I later found out was in Netbeans as well!). I didn't make a big deal out of it as I am equally comfortable working with this new IDE, but I couldn't get the science behind his obsession. He said this feature makes sure that if any method is updated by a programmer, the IDE will turn the method name to red in places where it is used. I told him that I do not have a problem since I always search for method usage in the project and make sure its updated. IDEs even have refactoring features for exactly that, but... I recently implemented a feature for a project, and I was happy about it and considering him a senior, I asked him his comments about the implementation quality.. he thought long and hard, made a few funny faces, and when he couldn't find anything, he said "ummm, your program will crash if JS is disabled" - he was wrong, since I had made sure it would work fine with default values even if JS was disabled. I told him that and then he said "oh okay". BUT, the funny thing is, a few days back, he implemented something and I objected with "But that would not run if JS is disabled" and his response was "We don't have to care about people who disable JS" :-/ Once he asked me to investigate if there was a way to modify a CMS generated menu programmatically by extending the CMS, I did my research and told him that the only was is to inject a menu item using JavaScript / jQuery and his reaction was "ah that's ugly, and hacky, not acceptable" and two days later, I see that feature implemented in the same way as I had suggested. The point is, his reaction was not respectful at all, even if what I proposed was hacky, he should be respectful, that I know what's hacky and if I am suggesting something hacky, there must be a reason for it. There are plenty of other reasons / examples where I feel I am not being treated fairly. I want your advice as to what is it that I am doing wrong and how to deal with such a situation. The other guys in the team are actually very good people, and I do not want to leave the job either (although I could, if I want to). All I want is respect and equal treatment. I have thought about talking to this guy in a face to face meeting, but that worries me that his attitude might get worse and make things more difficult for me (since he doesn't seem to be the guy who thinks he can be wrong too). I am also considering talking to the other co-founder but I am not sure how he will take it (as both founders have been friends forever). Thanks for reading the long message, I really appreciate your help.

  Read the article

• Trying to configure HWIC-3G-HSPA

  - by user1174838

  I'm trying to configure a couple of Cisco 1941 routes. The are both identical routers. Each as a HWIC-1T (Smart Serial interface) and a HWIC-3G-HSPA 3G interface. These routers are to be sent to remote sites. We have connectivity to one of the sites but if remote site A gors down we lose connectivity to remote site B. The HWIC-1T is the primary WAN interface using frame relay joining the two remote sites We want the HWIC-3G-HSPA to be usable for direct connectivity from head office to remote site B, and also the HWIC-3G-HSPA is do be used for comms between the remote sites when the frame relay is down (happens quite a bit). I initialy tried to do dynamic routing using EIGRP however in my lab setup of laptop - 1941 - 1941 - laptop, I was unable to get end to end connectivity. I later settled on static routing and have got end to end connectivity but only over frame relay, not the HWIC-3G-HSPA. The sanitized running config for remote site A: version 15.1 service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption service udp-small-servers service tcp-small-servers ! hostname remoteA ! boot-start-marker boot-end-marker ! ! logging buffered 51200 warnings enable secret 5 censored ! no aaa new-model clock timezone wst 8 0 ! no ipv6 cef ip source-route ip cef ! ip domain name yourdomain.com multilink bundle-name authenticated ! chat-script gsm "" "ATDT*98*1#" TIMEOUT 30 "CONNECT" ! username admin privilege 15 secret 5 censored ! controller Cellular 0/1 ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.2.5 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0 ip address 10.1.1.2 255.255.255.252 encapsulation frame-relay cdp enable frame-relay interface-dlci 16 frame-relay lmi-type ansi ! interface Cellular0/1/0 ip address negotiated encapsulation ppp dialer in-band dialer idle-timeout 2147483 dialer string gsm dialer-group 1 async mode interactive ppp chap hostname censored ppp chap password 7 censored cdp enable ! interface Cellular0/1/1 no ip address encapsulation ppp ! interface Dialer0 no ip address ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip route 0.0.0.0 0.0.0.0 Serial0/0/0 210 permanent ip route 0.0.0.0 0.0.0.0 Cellular0/1/0 220 permanent ip route 172.31.2.0 255.255.255.0 Cellular0/1/0 permanent ip route 192.168.3.0 255.255.255.0 10.1.1.1 permanent ip route 192.168.3.0 255.255.255.0 Cellular0/1/0 210 permanent ! access-list 1 permit any dialer-list 1 protocol ip list 1 ! control-plane ! line con 0 logging synchronous login local line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line 0/1/0 exec-timeout 0 0 script dialer gsm login modem InOut no exec transport input all rxspeed 7200000 txspeed 5760000 line 0/1/1 no exec rxspeed 7200000 txspeed 5760000 line vty 0 4 access-class 23 in privilege level 15 password 7 censored login local transport input all line vty 5 15 access-class 23 in privilege level 15 password 7 censored login local transport input all line vty 16 1370 password 7 censored login transport input all ! scheduler allocate 20000 1000 end The sanitized running config for remote site B: version 15.1 service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption service udp-small-servers service tcp-small-servers ! hostname remoteB ! boot-start-marker boot-end-marker ! logging buffered 51200 warnings enable secret 5 censored ! no aaa new-model clock timezone wst 8 0 ! no ipv6 cef ip source-route ip cef ! no ip domain lookup ip domain name yourdomain.com multilink bundle-name authenticated ! chat-script gsm "" "ATDT*98*1#" TIMEOUT 30 "CONNECT" username admin privilege 15 secret 5 censored ! controller Cellular 0/1 ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.3.1 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0 ip address 10.1.1.1 255.255.255.252 encapsulation frame-relay clock rate 2000000 cdp enable frame-relay interface-dlci 16 frame-relay lmi-type ansi frame-relay intf-type dce ! interface Cellular0/1/0 ip address negotiated encapsulation ppp dialer in-band dialer idle-timeout 2147483 dialer string gsm dialer-group 1 async mode interactive ppp chap hostname censored ppp chap password 7 censored ppp ipcp dns request cdp enable ! interface Cellular0/1/1 no ip address encapsulation ppp ! interface Dialer0 no ip address ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip route 0.0.0.0 0.0.0.0 Serial0/0/0 210 permanent ip route 0.0.0.0 0.0.0.0 Cellular0/1/0 220 permanent ip route 172.31.2.0 255.255.255.0 Cellular0/1/0 permanent ip route 192.168.2.0 255.255.255.0 10.1.1.2 permanent ip route 192.168.2.0 255.255.255.0 Cellular0/1/0 210 permanent ! kron occurrence PING in 1 recurring policy-list ICMP ! access-list 1 permit any dialer-list 1 protocol ip list 1 ! control-plane ! line con 0 logging synchronous login local line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line 0/1/0 exec-timeout 0 0 script dialer gsm login modem InOut no exec transport input all rxspeed 7200000 txspeed 5760000 line 0/1/1 no exec rxspeed 7200000 txspeed 5760000 line vty 0 4 access-class 23 in privilege level 15 password 7 censored login transport input all line vty 5 15 access-class 23 in privilege level 15 password 7 censored login transport input all line vty 16 1370 password 7 censored login transport input all ! scheduler allocate 20000 1000 end The last problem I'm having is the 3G interfaces go down after only a few minutes of inactivity. I've tried using kron to ping the local HWIC-3G-HSPA interface (cellular 0/1/0) every minute but that hasn't been successful. Manually pinging the IP assigned (by the telco) to ce0/1/0 does bring the interface up. Any ideas? Thanks

  Read the article

• Oracle Coherence, Split-Brain and Recovery Protocols In Detail

  - by Ricardo Ferreira

  This article provides a high level conceptual overview of Split-Brain scenarios in distributed systems. It will focus on a specific example of cluster communication failure and recovery in Oracle Coherence. This includes a discussion on the witness protocol (used to remove failed cluster members) and the panic protocol (used to resolve Split-Brain scenarios). Note that the removal of cluster members does not necessarily indicate a Split-Brain condition. Oracle Coherence does not (and cannot) detect a Split-Brain as it occurs, the condition is only detected when cluster members that previously lost contact with each other regain contact. Cluster Topology and Configuration In order to create an good didactic for the article, let's assume a cluster topology and configuration. In this example we have a six member cluster, consisting of one JVM on each physical machine. The member IDs are as follows: Member ID  IP Address  1  10.149.155.76  2  10.149.155.77  3  10.149.155.236  4  10.149.155.75  5  10.149.155.79  6  10.149.155.78 Members 1, 2, and 3 are connected to a switch, and members 4, 5, and 6 are connected to a second switch. There is a link between the two switches, which provides network connectivity between all of the machines. Member 1 is the first member to join this cluster, thus making it the senior member. Member 6 is the last member to join this cluster. Here is a log snippet from Member 6 showing the complete member set: 2010-02-26 15:27:57.390/3.062 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=main, member=6): Started DefaultCacheServer... SafeCluster: Name=cluster:0xDDEB Group{Address=224.3.5.3, Port=35465, TTL=4} MasterMemberSet ( ThisMember=Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) OldestMember=Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) ActualMemberSet=MemberSet(Size=6, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) Member(Id=2, Timestamp=2010-02-26 15:27:17.847, Address=10.149.155.77:8088, MachineId=1101, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:296, Role=CoherenceServer) Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer) Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) Member(Id=5, Timestamp=2010-02-26 15:27:49.095, Address=10.149.155.79:8088, MachineId=1103, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:3229, Role=CoherenceServer) Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) ) RecycleMillis=120000 RecycleSet=MemberSet(Size=0, BitSetCount=0 ) ) At approximately 15:30, the connection between the two switches is severed: Thirty seconds later (the default packet timeout in development mode) the logs indicate communication failures across the cluster. In this example, the communication failure was caused by a network failure. In a production setting, this type of communication failure can have many root causes, including (but not limited to) network failures, excessive GC, high CPU utilization, swapping/virtual memory, and exceeding maximum network bandwidth. In addition, this type of failure is not necessarily indicative of a split brain. Any communication failure will be logged in this fashion. Member 2 logs a communication failure with Member 5: 2010-02-26 15:30:32.638/196.928 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=PacketPublisher, member=2): Timeout while delivering a packet; requesting the departure confirmation for Member(Id=5, Timestamp=2010-02-26 15:27:49.095, Address=10.149.155.79:8088, MachineId=1103, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:3229, Role=CoherenceServer) by MemberSet(Size=2, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) ) The Coherence clustering protocol (TCMP) is a reliable transport mechanism built on UDP. In order for the protocol to be reliable, it requires an acknowledgement (ACK) for each packet delivered. If a packet fails to be acknowledged within the configured timeout period, the Coherence cluster member will log a packet timeout (as seen in the log message above). When this occurs, the cluster member will consult with other members to determine who is at fault for the communication failure. If the witness members agree that the suspect member is at fault, the suspect is removed from the cluster. If the witnesses unanimously disagree, the accuser is removed. This process is known as the witness protocol. Since Member 2 cannot communicate with Member 5, it selects two witnesses (Members 1 and 4) to determine if the communication issue is with Member 5 or with itself (Member 2). However, Member 4 is on the switch that is no longer accessible by Members 1, 2 and 3; thus a packet timeout for member 4 is recorded as well: 2010-02-26 15:30:35.648/199.938 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=PacketPublisher, member=2): Timeout while delivering a packet; requesting the departure confirmation for Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) by MemberSet(Size=2, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) ) Member 1 has the ability to confirm the departure of member 4, however Member 6 cannot as it is also inaccessible. At the same time, Member 3 sends a request to remove Member 6, which is followed by a report from Member 3 indicating that Member 6 has departed the cluster: 2010-02-26 15:30:35.706/199.996 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=2): MemberLeft request for Member 6 received from Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer) 2010-02-26 15:30:35.709/199.999 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=2): MemberLeft notification for Member 6 received from Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer) The log for Member 3 determines how Member 6 departed the cluster: 2010-02-26 15:30:35.161/191.694 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=PacketPublisher, member=3): Timeout while delivering a packet; requesting the departure confirmation for Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) by MemberSet(Size=2, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) Member(Id=2, Timestamp=2010-02-26 15:27:17.847, Address=10.149.155.77:8088, MachineId=1101, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:296, Role=CoherenceServer) ) 2010-02-26 15:30:35.165/191.698 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=Cluster, member=3): Member departure confirmed by MemberSet(Size=2, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) Member(Id=2, Timestamp=2010-02-26 15:27:17.847, Address=10.149.155.77:8088, MachineId=1101, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:296, Role=CoherenceServer) ); removing Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) In this case, Member 3 happened to select two witnesses that it still had connectivity with (Members 1 and 2) thus resulting in a simple decision to remove Member 6. Given the departure of Member 6, Member 2 is left with a single witness to confirm the departure of Member 4: 2010-02-26 15:30:35.713/200.003 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=Cluster, member=2): Member departure confirmed by MemberSet(Size=1, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) ); removing Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) In the meantime, Member 4 logs a missing heartbeat from the senior member. This message is also logged on Members 5 and 6. 2010-02-26 15:30:07.906/150.453 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=PacketListenerN, member=4): Scheduled senior member heartbeat is overdue; rejoining multicast group. Next, Member 4 logs a TcpRing failure with Member 2, thus resulting in the termination of Member 2: 2010-02-26 15:30:21.421/163.968 Oracle Coherence GE 3.5.3/465p2 <D4> (thread=Cluster, member=4): TcpRing: Number of socket exceptions exceeded maximum; last was "java.net.SocketTimeoutException: connect timed out"; removing the member: 2 For quick process termination detection, Oracle Coherence utilizes a feature called TcpRing which is a sparse collection of TCP/IP-based connections between different members in the cluster. Each member in the cluster is connected to at least one other member, which (if at all possible) is running on a different physical box. This connection is not used for any data transfer, only heartbeat communications are sent once a second per each link. If a certain number of exceptions are thrown while trying to re-establish a connection, the member throwing the exceptions is removed from the cluster. Member 5 logs a packet timeout with Member 3 and cites witnesses Members 4 and 6: 2010-02-26 15:30:29.791/165.037 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=PacketPublisher, member=5): Timeout while delivering a packet; requesting the departure confirmation for Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer) by MemberSet(Size=2, BitSetCount=2 Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) ) 2010-02-26 15:30:29.798/165.044 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=Cluster, member=5): Member departure confirmed by MemberSet(Size=2, BitSetCount=2 Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) ); removing Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer) Eventually we are left with two distinct clusters consisting of Members 1, 2, 3 and Members 4, 5, 6, respectively. In the latter cluster, Member 4 is promoted to senior member. The connection between the two switches is restored at 15:33. Upon the restoration of the connection, the cluster members immediately receive cluster heartbeats from the two senior members. In the case of Members 1, 2, and 3, the following is logged: 2010-02-26 15:33:14.970/369.066 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=Cluster, member=1): The member formerly known as Member(Id=4, Timestamp=2010-02-26 15:30:35.341, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) has been forcefully evicted from the cluster, but continues to emit a cluster heartbeat; henceforth, the member will be shunned and its messages will be ignored. Likewise for Members 4, 5, and 6: 2010-02-26 15:33:14.343/336.890 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=Cluster, member=4): The member formerly known as Member(Id=1, Timestamp=2010-02-26 15:30:31.64, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) has been forcefully evicted from the cluster, but continues to emit a cluster heartbeat; henceforth, the member will be shunned and its messages will be ignored. This message indicates that a senior heartbeat is being received from members that were previously removed from the cluster, in other words, something that should not be possible. For this reason, the recipients of these messages will initially ignore them. After several iterations of these messages, the existence of multiple clusters is acknowledged, thus triggering the panic protocol to reconcile this situation. When the presence of more than one cluster (i.e. Split-Brain) is detected by a Coherence member, the panic protocol is invoked in order to resolve the conflicting clusters and consolidate into a single cluster. The protocol consists of the removal of smaller clusters until there is one cluster remaining. In the case of equal size clusters, the one with the older Senior Member will survive. Member 1, being the oldest member, initiates the protocol: 2010-02-26 15:33:45.970/400.066 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=Cluster, member=1): An existence of a cluster island with senior Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) containing 3 nodes have been detected. Since this Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) is the senior of an older cluster island, the panic protocol is being activated to stop the other island's senior and all junior nodes that belong to it. Member 3 receives the panic: 2010-02-26 15:33:45.803/382.336 Oracle Coherence GE 3.5.3/465p2 <Error> (thread=Cluster, member=3): Received panic from senior Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) caused by Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) Member 4, the senior member of the younger cluster, receives the kill message from Member 3: 2010-02-26 15:33:44.921/367.468 Oracle Coherence GE 3.5.3/465p2 <Error> (thread=Cluster, member=4): Received a Kill message from a valid Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer); stopping cluster service. In turn, Member 4 requests the departure of its junior members 5 and 6: 2010-02-26 15:33:44.921/367.468 Oracle Coherence GE 3.5.3/465p2 <Error> (thread=Cluster, member=4): Received a Kill message from a valid Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer); stopping cluster service. 2010-02-26 15:33:43.343/349.015 Oracle Coherence GE 3.5.3/465p2 <Error> (thread=Cluster, member=6): Received a Kill message from a valid Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer); stopping cluster service. Once Members 4, 5, and 6 restart, they rejoin the original cluster with senior member 1. The log below is from Member 4. Note that it receives a different member id when it rejoins the cluster. 2010-02-26 15:33:44.921/367.468 Oracle Coherence GE 3.5.3/465p2 <Error> (thread=Cluster, member=4): Received a Kill message from a valid Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer); stopping cluster service. 2010-02-26 15:33:46.921/369.468 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Service Cluster left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Invocation:InvocationService, member=4): Service InvocationService left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=OptimisticCache, member=4): Service OptimisticCache left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=ReplicatedCache, member=4): Service ReplicatedCache left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=DistributedCache, member=4): Service DistributedCache left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Invocation:Management, member=4): Service Management left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member 6 left service Management with senior member 5 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member 6 left service DistributedCache with senior member 5 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member 6 left service ReplicatedCache with senior member 5 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member 6 left service OptimisticCache with senior member 5 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member 6 left service InvocationService with senior member 5 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member(Id=6, Timestamp=2010-02-26 15:33:47.046, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) left Cluster with senior member 4 2010-02-26 15:33:49.218/371.765 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=main, member=n/a): Restarting cluster 2010-02-26 15:33:49.421/371.968 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=n/a): Service Cluster joined the cluster with senior service member n/a 2010-02-26 15:33:49.625/372.172 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=Cluster, member=n/a): This Member(Id=5, Timestamp=2010-02-26 15:33:50.499, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=1) joined cluster "cluster:0xDDEB" with senior Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=2) Cool isn't it?

  Read the article

• Entity Framework Code-First, OData & Windows Phone Client

  - by Jon Galloway

  Entity Framework Code-First is the coolest thing since sliced bread, Windows  Phone is the hottest thing since Tickle-Me-Elmo and OData is just too great to ignore. As part of the Full Stack project, we wanted to put them together, which turns out to be pretty easy… once you know how.   EF Code-First CTP5 is available now and there should be very few breaking changes in the release edition, which is due early in 2011.  Note: EF Code-First evolved rapidly and many of the existing documents and blog posts which were written with earlier versions, may now be obsolete or at least misleading.   Code-First? With traditional Entity Framework you start with a database and from that you generate “entities” – classes that bridge between the relational database and your object oriented program. With Code-First (Magic-Unicorn) (see Hanselman’s write up and this later write up by Scott Guthrie) the Entity Framework looks at classes you created and says “if I had created these classes, the database would have to have looked like this…” and creates the database for you! By deriving your entity collections from DbSet and exposing them via a class that derives from DbContext, you "turn on" database backing for your POCO with a minimum of code and no hidden designer or configuration files. POCO == Plain Old CLR Objects Your entity objects can be used throughout your applications - in web applications, console applications, Silverlight and Windows Phone applications, etc. In our case, we'll want to read and update data from a Windows Phone client application, so we'll expose the entities through a DataService and hook the Windows Phone client application to that data via proxies.  Piece of Pie.  Easy as cake. The Demo Architecture To see this at work, we’ll create an ASP.NET/MVC application which will act as the host for our Data Service.  We’ll create an incredibly simple data layer using EF Code-First on top of SQLCE4 and we’ll expose the data in a WCF Data Service using the oData protocol.  Our Windows Phone 7 client will instantiate  the data context via a URI and load the data asynchronously. Setting up the Server project with MVC 3, EF Code First, and SQL CE 4 Create a new application of type ASP.NET MVC 3 and name it DeadSimpleServer.  We need to add the latest SQLCE4 and Entity Framework Code First CTP's to our project. Fortunately, NuGet makes that really easy. Open the Package Manager Console (View / Other Windows / Package Manager Console) and type in "Install-Package EFCodeFirst.SqlServerCompact" at the PM> command prompt. Since NuGet handles dependencies for you, you'll see that it installs everything you need to use Entity Framework Code First in your project. PM> install-package EFCodeFirst.SqlServerCompact 'SQLCE (= 4.0.8435.1)' not installed. Attempting to retrieve dependency from source... Done 'EFCodeFirst (= 0.8)' not installed. Attempting to retrieve dependency from source... Done 'WebActivator (= 1.0.0.0)' not installed. Attempting to retrieve dependency from source... Done You are downloading SQLCE from Microsoft, the license agreement to which is available at http://173.203.67.148/licenses/SQLCE/EULA_ENU.rtf. Check the package for additional dependencies, which may come with their own license agreement(s). Your use of the package and dependencies constitutes your acceptance of their license agreements. If you do not accept the license agreement(s), then delete the relevant components from your device. Successfully installed 'SQLCE 4.0.8435.1' You are downloading EFCodeFirst from Microsoft, the license agreement to which is available at http://go.microsoft.com/fwlink/?LinkID=206497. Check the package for additional dependencies, which may come with their own license agreement(s). Your use of the package and dependencies constitutes your acceptance of their license agreements. If you do not accept the license agreement(s), then delete the relevant components from your device. Successfully installed 'EFCodeFirst 0.8' Successfully installed 'WebActivator 1.0.0.0' You are downloading EFCodeFirst.SqlServerCompact from Microsoft, the license agreement to which is available at http://173.203.67.148/licenses/SQLCE/EULA_ENU.rtf. Check the package for additional dependencies, which may come with their own license agreement(s). Your use of the package and dependencies constitutes your acceptance of their license agreements. If you do not accept the license agreement(s), then delete the relevant components from your device. Successfully installed 'EFCodeFirst.SqlServerCompact 0.8' Successfully added 'SQLCE 4.0.8435.1' to EfCodeFirst-CTP5 Successfully added 'EFCodeFirst 0.8' to EfCodeFirst-CTP5 Successfully added 'WebActivator 1.0.0.0' to EfCodeFirst-CTP5 Successfully added 'EFCodeFirst.SqlServerCompact 0.8' to EfCodeFirst-CTP5 Note: We're using SQLCE 4 with Entity Framework here because they work really well together from a development scenario, but you can of course use Entity Framework Code First with other databases supported by Entity framework. Creating The Model using EF Code First Now we can create our model class. Right-click the Models folder and select Add/Class. Name the Class Person.cs and add the following code: using System.Data.Entity; namespace DeadSimpleServer.Models { public class Person { public int ID { get; set; } public string Name { get; set; } } public class PersonContext : DbContext { public DbSet<Person> People { get; set; } } } Notice that the entity class Person has no special interfaces or base class. There's nothing special needed to make it work - it's just a POCO. The context we'll use to access the entities in the application is called PersonContext, but you could name it anything you wanted. The important thing is that it inherits DbContext and contains one or more DbSet which holds our entity collections. Adding Seed Data We need some testing data to expose from our service. The simplest way to get that into our database is to modify the CreateCeDatabaseIfNotExists class in AppStart_SQLCEEntityFramework.cs by adding some seed data to the Seed method: protected virtual void Seed( TContext context ) { var personContext = context as PersonContext; personContext.People.Add( new Person { ID = 1, Name = "George Washington" } ); personContext.People.Add( new Person { ID = 2, Name = "John Adams" } ); personContext.People.Add( new Person { ID = 3, Name = "Thomas Jefferson" } ); personContext.SaveChanges(); } The CreateCeDatabaseIfNotExists class name is pretty self-explanatory - when our DbContext is accessed and the database isn't found, a new one will be created and populated with the data in the Seed method. There's one more step to make that work - we need to uncomment a line in the Start method at the top of of the AppStart_SQLCEEntityFramework class and set the context name, as shown here, public static class AppStart_SQLCEEntityFramework { public static void Start() { DbDatabase.DefaultConnectionFactory = new SqlCeConnectionFactory("System.Data.SqlServerCe.4.0"); // Sets the default database initialization code for working with Sql Server Compact databases // Uncomment this line and replace CONTEXT_NAME with the name of your DbContext if you are // using your DbContext to create and manage your database DbDatabase.SetInitializer(new CreateCeDatabaseIfNotExists<PersonContext>()); } } Now our database and entity framework are set up, so we can expose data via WCF Data Services. Note: This is a bare-bones implementation with no administration screens. If you'd like to see how those are added, check out The Full Stack screencast series. Creating the oData Service using WCF Data Services Add a new WCF Data Service to the project (right-click the project / Add New Item / Web / WCF Data Service). We’ll be exposing all the data as read/write.  Remember to reconfigure to control and minimize access as appropriate for your own application. Open the code behind for your service. In our case, the service was called PersonTestDataService.svc so the code behind class file is PersonTestDataService.svc.cs. using System.Data.Services; using System.Data.Services.Common; using System.ServiceModel; using DeadSimpleServer.Models; namespace DeadSimpleServer { [ServiceBehavior( IncludeExceptionDetailInFaults = true )] public class PersonTestDataService : DataService<PersonContext> { // This method is called only once to initialize service-wide policies. public static void InitializeService( DataServiceConfiguration config ) { config.SetEntitySetAccessRule( "*", EntitySetRights.All ); config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; config.UseVerboseErrors = true; } } } We're enabling a few additional settings to make it easier to debug if you run into trouble. The ServiceBehavior attribute is set to include exception details in faults, and we're using verbose errors. You can remove both of these when your service is working, as your public production service shouldn't be revealing exception information. You can view the output of the service by running the application and browsing to http://localhost:[portnumber]/PersonTestDataService.svc/: <service xml:base="http://localhost:49786/PersonTestDataService.svc/" xmlns:atom="http://www.w3.org/2005/Atom" xmlns:app="http://www.w3.org/2007/app" xmlns="http://www.w3.org/2007/app"> <workspace> <atom:title>Default</atom:title> <collection href="People"> <atom:title>People</atom:title> </collection> </workspace> </service> This indicates that the service exposes one collection, which is accessible by browsing to http://localhost:[portnumber]/PersonTestDataService.svc/People <?xml version="1.0" encoding="iso-8859-1" standalone="yes"?> <feed xml:base=http://localhost:49786/PersonTestDataService.svc/ xmlns:d="http://schemas.microsoft.com/ado/2007/08/dataservices" xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata" xmlns="http://www.w3.org/2005/Atom"> <title type="text">People</title> <id>http://localhost:49786/PersonTestDataService.svc/People</id> <updated>2010-12-29T01:01:50Z</updated> <link rel="self" title="People" href="People" /> <entry> <id>http://localhost:49786/PersonTestDataService.svc/People(1)</id> <title type="text"></title> <updated>2010-12-29T01:01:50Z</updated> <author> <name /> </author> <link rel="edit" title="Person" href="People(1)" /> <category term="DeadSimpleServer.Models.Person" scheme="http://schemas.microsoft.com/ado/2007/08/dataservices/scheme" /> <content type="application/xml"> <m:properties> <d:ID m:type="Edm.Int32">1</d:ID> <d:Name>George Washington</d:Name> </m:properties> </content> </entry> <entry> ... </entry> </feed> Let's recap what we've done so far. But enough with services and XML - let's get this into our Windows Phone client application. Creating the DataServiceContext for the Client Use the latest DataSvcUtil.exe from http://odata.codeplex.com. As of today, that's in this download: http://odata.codeplex.com/releases/view/54698 You need to run it with a few options: /uri - This will point to the service URI. In this case, it's http://localhost:59342/PersonTestDataService.svc  Pick up the port number from your running server (e.g., the server formerly known as Cassini). /out - This is the DataServiceContext class that will be generated. You can name it whatever you'd like. /Version - should be set to 2.0 /DataServiceCollection - Include this flag to generate collections derived from the DataServiceCollection base, which brings in all the ObservableCollection goodness that handles your INotifyPropertyChanged events for you. Here's the console session from when we ran it: <ListBox x:Name="MainListBox" Margin="0,0,-12,0" ItemsSource="{Binding}" SelectionChanged="MainListBox_SelectionChanged"> Next, to keep things simple, change the Binding on the two TextBlocks within the DataTemplate to Name and ID, <ListBox x:Name="MainListBox" Margin="0,0,-12,0" ItemsSource="{Binding}" SelectionChanged="MainListBox_SelectionChanged"> <ListBox.ItemTemplate> <DataTemplate> <StackPanel Margin="0,0,0,17" Width="432"> <TextBlock Text="{Binding Name}" TextWrapping="Wrap" Style="{StaticResource PhoneTextExtraLargeStyle}" /> <TextBlock Text="{Binding ID}" TextWrapping="Wrap" Margin="12,-6,12,0" Style="{StaticResource PhoneTextSubtleStyle}" /> </StackPanel> </DataTemplate> </ListBox.ItemTemplate> </ListBox> Getting The Context In the code-behind you’ll first declare a member variable to hold the context from the Entity Framework. This is named using convention over configuration. The db type is Person and the context is of type PersonContext, You initialize it by providing the URI, in this case using the URL obtained from the Cassini web server, PersonContext context = new PersonContext( new Uri( "http://localhost:49786/PersonTestDataService.svc/" ) ); Create a second member variable of type DataServiceCollection<Person> but do not initialize it, DataServiceCollection<Person> people; In the constructor you’ll initialize the DataServiceCollection using the PersonContext, public MainPage() { InitializeComponent(); people = new DataServiceCollection<Person>( context ); Finally, you’ll load the people collection using the LoadAsync method, passing in the fully specified URI for the People collection in the web service, people.LoadAsync( new Uri( "http://localhost:49786/PersonTestDataService.svc/People" ) ); Note that this method runs asynchronously and when it is finished the people  collection is already populated. Thus, since we didn’t need or want to override any of the behavior we don’t implement the LoadCompleted. You can use the LoadCompleted event if you need to do any other UI updates, but you don't need to. The final code is as shown below: using System; using System.Data.Services.Client; using System.Windows; using System.Windows.Controls; using DeadSimpleServer.Models; using Microsoft.Phone.Controls; namespace WindowsPhoneODataTest { public partial class MainPage : PhoneApplicationPage { PersonContext context = new PersonContext( new Uri( "http://localhost:49786/PersonTestDataService.svc/" ) ); DataServiceCollection<Person> people; // Constructor public MainPage() { InitializeComponent(); // Set the data context of the listbox control to the sample data // DataContext = App.ViewModel; people = new DataServiceCollection<Person>( context ); people.LoadAsync( new Uri( "http://localhost:49786/PersonTestDataService.svc/People" ) ); DataContext = people; this.Loaded += new RoutedEventHandler( MainPage_Loaded ); } // Handle selection changed on ListBox private void MainListBox_SelectionChanged( object sender, SelectionChangedEventArgs e ) { // If selected index is -1 (no selection) do nothing if ( MainListBox.SelectedIndex == -1 ) return; // Navigate to the new page NavigationService.Navigate( new Uri( "/DetailsPage.xaml?selectedItem=" + MainListBox.SelectedIndex, UriKind.Relative ) ); // Reset selected index to -1 (no selection) MainListBox.SelectedIndex = -1; } // Load data for the ViewModel Items private void MainPage_Loaded( object sender, RoutedEventArgs e ) { if ( !App.ViewModel.IsDataLoaded ) { App.ViewModel.LoadData(); } } } } With people populated we can set it as the DataContext and run the application; you’ll find that the Name and ID are displayed in the list on the Mainpage. Here's how the pieces in the client fit together: Complete source code available here

  Read the article

• Software Raid 10 corrupted superblock after dual disk failure, how do I recover it?

  - by Shoshomiga

  I have a software raid 10 with 6 x 2tb hard drives (raid 1 for /boot), ubuntu 10.04 is the os. I had a raid controller failure that put 2 drives out of sync, crashed the system and initially the os didnt boot up and went into initramfs instead, saying that drives were busy but I eventually managed to bring the raid up by stopping and assembling the drives. The os booted up and said that there were filesystem errors, I chose to ignore because it would remount the fs in read-only mode if there was a problem. Everything seemed to be working fine and the 2 drives started to rebuild, I was sure that it was a sata controller failure because I had dma errors in my log files. The os crashed soon after that with ext errors. Now its not bringing up the raid, it says that there is no superblock on /dev/sda2, even if I assemble manually with all the device names. I also did a memtest and changed the motherboard in addition to everything else. EDIT: This is my partition layout Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0009c34a Device Boot Start End Blocks Id System /dev/sdb1 * 2048 511999 254976 83 Linux /dev/sdb2 512000 3904980991 1952234496 83 Linux /dev/sdb3 3904980992 3907028991 1024000 82 Linux swap / Solaris All 6 disks have the same layout, partition #1 is for raid 1 /boot, partition #2 is for raid 10 far plan, partition #3 is swap, but sda did not have swap enabled EDIT2: This is the output of mdadm --detail /dev/md1 Layout : near=1, far=2 Chunk Size : 64k UUID : a0feff55:2018f8ff:e368bf24:bd0fce41 Events : 0.3112126 Number Major Minor RaidDevice State 0 8 34 0 spare rebuilding /dev/sdc2 1 0 0 1 removed 2 8 18 2 active sync /dev/sdb2 3 8 50 3 active sync /dev/sdd2 4 0 0 4 removed 5 8 82 5 active sync /dev/sdf2 6 8 66 - spare /dev/sde2 EDIT3: I ran ddrescue and it has copied everything from sda except a single 4096 byte sector that I suspect is the raid superblock EDIT4: Here is some more info too long to fit here lshw: http://pastebin.com/2eKrh7nF mdadm --detail /dev/sd[abcdef]1 (raid1): http://pastebin.com/cgMQWerS mdadm --detail /dev/sd[abcdef]2 (raid10): http://pastebin.com/V5dtcGPF dumpe2fs of /dev/sda2 (from the ddrescue cloned drive): http://pastebin.com/sp0GYcJG I tried to recreate md1 based on this info with the command mdadm --create /dev/md1 -v --assume-clean --level=10 --raid-devices=6 --chunk=64K --layout=f2 /dev/sda2 missing /dev/sdc2 /dev/sdd2 missing /dev/sdf2 But I can't mount it, I also tried to recreate it based on my initial mdadm --detail /dev/md1 but it still doesn't mount It also warns me that /dev/sda2 is an ext2fs file system but I guess its because of ddrescue

  Read the article

• Insufficient Permissions Problems with MSDeploy and TFS Build 2010

  - by jdanforth

  I ran into these problems on a TFS 2010 RC setup where I wanted to deploy a web site as part of the nightly build: C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\Web\Microsoft.Web.Publishing.targets (3481): Web deployment task failed.(An error occurred when reading the IIS Configuration File 'MACHINE/REDIRECTION'. The identity performing the operation was 'NT AUTHORITY\NETWORK SERVICE'.)  An error occurred when reading the IIS Configuration File 'MACHINE/REDIRECTION'. The identity performing the operation was 'NT AUTHORITY\NETWORK SERVICE'. Filename: \\?\C:\Windows\system32\inetsrv\config\redirection.config Error: Cannot read configuration file due to insufficient permissions  As you can see I’m running the build service as NETWORK SERVICE which is quite usual. The first thing I did then was to give NETWORK SERVICE read access to the whole directory where redirection.config is sitting; C:\Windows\system32\inetsrv\config. That gave me a new error: C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\Web\Microsoft.Web.Publishing.targets (3481): Web deployment task failed. (Attempted to perform an unauthorized operation.) The reason for this problem was that NETWORK SERVICE didn’t have write permission to the place where I’ve told MSDeploy to put the web site physically on the disk. Once I’d given the NETWORK SERVICE the right permissions, MSDeploy completed as expected! NOTE! I’ve not had this problem with TFS 2010 RTM, so it might be just a RC issue!

  Read the article

• How do I get this Cisco VPN client to connect?

  - by WebWeasel

  I've got Ubuntu 10.10 64 bit and installed network-manager-vpnc and configured the connection but I keep getting this: NetworkManager[1217]: <info> Starting VPN service 'org.freedesktop.NetworkManager.vpnc'... NetworkManager[1217]: <info> VPN service 'org.freedesktop.NetworkManager.vpnc' started (org.freedesktop.NetworkManager.vpnc), PID 4420 NetworkManager[1217]: <info> VPN service 'org.freedesktop.NetworkManager.vpnc' appeared, activating connections NetworkManager[1217]: <info> VPN plugin state changed: 1 NetworkManager[1217]: <info> VPN plugin state changed: 3 NetworkManager[1217]: <info> VPN connection 'CSI' (Connect) reply received. modem-manager: (net/tun0): could not get port's parent device NetworkManager[1217]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/tun0, iface: tun0) NetworkManager[1217]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/tun0, iface: tun0): no ifupdown configuration found. kernel: [ 2281.723506] tun0: Disabled Privacy Extensions avahi-daemon[1109]: Withdrawing workstation service for tun0. NetworkManager[1217]: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/tun0, iface: tun0) NetworkManager[1217]: <warn> VPN plugin failed: 1 NetworkManager[1217]: <info> VPN plugin state changed: 6 NetworkManager[1217]: <info> VPN plugin state change reason: 0 NetworkManager[1217]: <warn> error disconnecting VPN: Could not process the request because no VPN connection was active. NetworkManager[1217]: <info> Policy set 'Auto eth0' (eth0) as default for IPv4 routing and DNS. NetworkManager[1217]: <info> Starting VPN service 'org.freedesktop.NetworkManager.vpnc'... NetworkManager[1217]: <info> VPN service 'org.freedesktop.NetworkManager.vpnc' started (org.freedesktop.NetworkManager.vpnc), PID 4547 NetworkManager[1217]: <info> VPN service 'org.freedesktop.NetworkManager.vpnc' appeared, activating connections NetworkManager[1217]: <info> VPN plugin state changed: 1 NetworkManager[1217]: <info> VPN plugin state changed: 3 I've seen a couple of bugs on Launchpad that could be the same thing or have I done something wrong?

  Read the article

• Using RIA DomainServices with ASP.NET and MVC 2

  - by Bobby Diaz

  Recently, I started working on a new ASP.NET MVC 2 project and I wanted to reuse the data access (LINQ to SQL) and business logic methods (WCF RIA Services) that had been developed for a previous project that used Silverlight for the front-end.  I figured that I would be able to instantiate the various DomainService classes from within my controller’s action methods, because after all, the code for those services didn’t look very complicated.  WRONG!  I didn’t realize at first that some of the functionality is handled automatically by the framework when the domain services are hosted as WCF services.  After some initial searching, I came across an invaluable post by Joe McBride, which described how to get RIA Service .svc files to work in an MVC 2 Web Application, and another by Brad Abrams.  Unfortunately, Brad’s solution was for an earlier preview release of RIA Services and no longer works with the version that I am running (PDC Preview). I have not tried the RC version of WCF RIA Services, so I am not sure if any of the issues I am having have been resolved, but I wanted to come up with a way to reuse the shared libraries so I wouldn’t have to write a non-RIA version that basically did the same thing.  The classes I came up with work with the scenarios I have encountered so far, but I wanted to go ahead and post the code in case someone else is having the same trouble I had.  Hopefully this will save you a few headaches! 1. Querying When I first tried to use a DomainService class to perform a query inside one of my controller’s action methods, I got an error stating that “This DomainService has not been initialized.”  To solve this issue, I created an extension method for all DomainServices that creates the required DomainServiceContext and passes it to the service’s Initialize() method.  Here is the code for the extension method; notice that I am creating a sort of mock HttpContext for those cases when the service is running outside of IIS, such as during unit testing!     public static class ServiceExtensions     {         /// <summary>         /// Initializes the domain service by creating a new <see cref="DomainServiceContext"/>         /// and calling the base DomainService.Initialize(DomainServiceContext) method.         /// </summary>         /// <typeparam name="TService">The type of the service.</typeparam>         /// <param name="service">The service.</param>         /// <returns></returns>         public static TService Initialize<TService>(this TService service)             where TService : DomainService         {             var context = CreateDomainServiceContext();             service.Initialize(context);             return service;         }           private static DomainServiceContext CreateDomainServiceContext()         {             var provider = new ServiceProvider(new HttpContextWrapper(GetHttpContext()));             return new DomainServiceContext(provider, DomainOperationType.Query);         }           private static HttpContext GetHttpContext()         {             var context = HttpContext.Current;   #if DEBUG             // create a mock HttpContext to use during unit testing...             if ( context == null )             {                 var writer = new StringWriter();                 var request = new SimpleWorkerRequest("/", "/",                     String.Empty, String.Empty, writer);                   context = new HttpContext(request)                 {                     User = new GenericPrincipal(new GenericIdentity("debug"), null)                 };             } #endif               return context;         }     }   With that in place, I can use it almost as normally as my first attempt, except with a call to Initialize():     public ActionResult Index()     {         var service = new NorthwindService().Initialize();         var customers = service.GetCustomers();           return View(customers);     } 2. Insert / Update / Delete Once I got the records showing up, I was trying to insert new records or update existing data when I ran into the next issue.  I say issue because I wasn’t getting any kind of error, which made it a little difficult to track down.  But once I realized that that the DataContext.SubmitChanges() method gets called automatically at the end of each domain service submit operation, I could start working on a way to mimic the behavior of a hosted domain service.  What I came up with, was a base class called LinqToSqlRepository<T> that basically sits between your implementation and the default LinqToSqlDomainService<T> class.     [EnableClientAccess()]     public class NorthwindService : LinqToSqlRepository<NorthwindDataContext>     {         public IQueryable<Customer> GetCustomers()         {             return this.DataContext.Customers;         }           public void InsertCustomer(Customer customer)         {             this.DataContext.Customers.InsertOnSubmit(customer);         }           public void UpdateCustomer(Customer currentCustomer)         {             this.DataContext.Customers.TryAttach(currentCustomer,                 this.ChangeSet.GetOriginal(currentCustomer));         }           public void DeleteCustomer(Customer customer)         {             this.DataContext.Customers.TryAttach(customer);             this.DataContext.Customers.DeleteOnSubmit(customer);         }     } Notice the new base class name (just change LinqToSqlDomainService to LinqToSqlRepository).  I also added a couple of DataContext (for Table<T>) extension methods called TryAttach that will check to see if the supplied entity is already attached before attempting to attach it, which would cause an error! 3. LinqToSqlRepository<T> Below is the code for the LinqToSqlRepository class.  The comments are pretty self explanatory, but be aware of the [IgnoreOperation] attributes on the generic repository methods, which ensures that they will be ignored by the code generator and not available in the Silverlight client application.     /// <summary>     /// Provides generic repository methods on top of the standard     /// <see cref="LinqToSqlDomainService&lt;TContext&gt;"/> functionality.     /// </summary>     /// <typeparam name="TContext">The type of the context.</typeparam>     public abstract class LinqToSqlRepository<TContext> : LinqToSqlDomainService<TContext>         where TContext : System.Data.Linq.DataContext, new()     {         /// <summary>         /// Retrieves an instance of an entity using it's unique identifier.         /// </summary>         /// <typeparam name="TEntity">The type of the entity.</typeparam>         /// <param name="keyValues">The key values.</param>         /// <returns></returns>         [IgnoreOperation]         public virtual TEntity GetById<TEntity>(params object[] keyValues) where TEntity : class         {             var table = this.DataContext.GetTable<TEntity>();             var mapping = this.DataContext.Mapping.GetTable(typeof(TEntity));               var keys = mapping.RowType.IdentityMembers                 .Select((m, i) => m.Name + " = @" + i)                 .ToArray();               return table.Where(String.Join(" && ", keys), keyValues).FirstOrDefault();         }           /// <summary>         /// Creates a new query that can be executed to retrieve a collection         /// of entities from the <see cref="DataContext"/>.         /// </summary>         /// <typeparam name="TEntity">The type of the entity.</typeparam>         /// <returns></returns>         [IgnoreOperation]         public virtual IQueryable<TEntity> GetEntityQuery<TEntity>() where TEntity : class         {             return this.DataContext.GetTable<TEntity>();         }           /// <summary>         /// Inserts the specified entity.         /// </summary>         /// <typeparam name="TEntity">The type of the entity.</typeparam>         /// <param name="entity">The entity.</param>         /// <returns></returns>         [IgnoreOperation]         public virtual bool Insert<TEntity>(TEntity entity) where TEntity : class         {             //var table = this.DataContext.GetTable<TEntity>();             //table.InsertOnSubmit(entity);               return this.Submit(entity, null, DomainOperation.Insert);         }           /// <summary>         /// Updates the specified entity.         /// </summary>         /// <typeparam name="TEntity">The type of the entity.</typeparam>         /// <param name="entity">The entity.</param>         /// <returns></returns>         [IgnoreOperation]         public virtual bool Update<TEntity>(TEntity entity) where TEntity : class         {             return this.Update(entity, null);         }           /// <summary>         /// Updates the specified entity.         /// </summary>         /// <typeparam name="TEntity">The type of the entity.</typeparam>         /// <param name="entity">The entity.</param>         /// <param name="original">The original.</param>         /// <returns></returns>         [IgnoreOperation]         public virtual bool Update<TEntity>(TEntity entity, TEntity original)             where TEntity : class         {             if ( original == null )             {                 original = GetOriginal(entity);             }               var table = this.DataContext.GetTable<TEntity>();             table.TryAttach(entity, original);               return this.Submit(entity, original, DomainOperation.Update);         }           /// <summary>         /// Deletes the specified entity.         /// </summary>         /// <typeparam name="TEntity">The type of the entity.</typeparam>         /// <param name="entity">The entity.</param>         /// <returns></returns>         [IgnoreOperation]         public virtual bool Delete<TEntity>(TEntity entity) where TEntity : class         {             //var table = this.DataContext.GetTable<TEntity>();             //table.TryAttach(entity);             //table.DeleteOnSubmit(entity);               return this.Submit(entity, null, DomainOperation.Delete);         }           protected virtual bool Submit(Object entity, Object original, DomainOperation operation)         {             var entry = new ChangeSetEntry(0, entity, original, operation);             var changes = new ChangeSet(new ChangeSetEntry[] { entry });             return base.Submit(changes);         }           private TEntity GetOriginal<TEntity>(TEntity entity) where TEntity : class         {             var context = CreateDataContext();             var table = context.GetTable<TEntity>();             return table.FirstOrDefault(e => e == entity);         }     } 4. Conclusion So there you have it, a fully functional Repository implementation for your RIA Domain Services that can be consumed by your ASP.NET and MVC applications.  I have uploaded the source code along with unit tests and a sample web application that queries the Customers table from inside a Controller, as well as a Silverlight usage example. As always, I welcome any comments or suggestions on the approach I have taken.  If there is enough interest, I plan on contacting Colin Blair or maybe even the man himself, Brad Abrams, to see if this is something worthy of inclusion in the WCF RIA Services Contrib project.  What do you think? Enjoy!

  Read the article

• WCF Named Pipe IPC

  - by Peter M

  I have been trying to get up to speed on Named Pipes this week. The task I am trying to solve with them is that I have an existing windows service that is acting as a device driver that funnels data from an external device into a database. Now I have to modify this service and add an optional user front end (on the same machine, using a form of IPC) that can monitor the data as it passes between the device and the DB as well as send some commands back to the service. My initial ideas for the IPC were either named pipes or memory mapped files. So far I have been working through the named pipe idea using WCF Tutorial Basic Interprocess Communication . My idea is to set the Windows service up with an additional thread that implements the WCF NamedPipe Service and use that as a conduit to the internals of my driver. I have the sample code working, however I can not get my head around 2 issues that I am hoping that someone here can help me with: In the tutorial the ServiceHost is instantiated with a typeof(StringReverser) rather than by referencing a concrete class. Thus there seems to be no mechanism for the Server to interact with the service itself (between the host.Open() and host.Close() lines). Is it possible to create a link between and pass information between the server and the class that actually implements the service? If so, how? If I run a single instance of the server and then run multiple instance of the clients, it seems that each client gets a separate instance of the service class. I tried adding some state information to the class implementing the service and it was only retained within the instance of the named pipe. This is possibly related to the first question, but is there anyway to force the named pipes to use the same instance of the class that is implementing the service? Finally, any thoughts on MMF vs Named Pipes? Thanks for you help

  Read the article

• light.exe : error LGHT0217: Error executing ICE action &lsquo;ICE*&rsquo; with BizTalk Deployment Framework &amp; TFS 2010 Build.

  - by Vishal

  Hi there, Recently I was working with BizTalk Deployment Framework v5.0 for my BizTalk Sever 2009 projects and TFS 2010 Builds. I had followed all the steps mentioned in the BTDF documentation to create the build definition and also followed the steps to setup the Build Server with BTDF. After few hiccups I was stuck at this light.exe validation error. The detailed error is as below: light.exe : error LGHT0217: Error executing ICE action 'ICE06'. The most common cause of this kind of ICE failure is an incorrectly registered scripting engine. See http://wix.sourceforge.net/faq.html#Error217 for details and how to solve this problem. The following string format was not expected by the external UI message logger: "The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance." I found few blog posts and forum answers out there which had steps to resolve the error but all of them mentioned different things. Like: Some mentioned that disable the validation itself so that the VBScript would not be called. (I didn’t want to disable the validation.) Another said to put NT AUTHORITY\NETWORK SERVICE in the local Administrators group but this is not recommended as it opens up network security holes. But what actually worked for me was: TFS Build Service Account was part of the Administrator group on the Build Server which is OK. But somehow it was also part of the IIS_IUSR Group. I removed the TFS Build Service Account from the IIS_IUSR group. Queued up my TFS Build but same error. Again after some digging, I found that I had not restarted the Visual Studio Team Build Service. In a Nutshell: Remove TFS Build Service Account from IIS_IUSR Group. Restart the Visual Studio Team Build Service, either from Services or TFS Console.   Hope this resolves the issue for someone and not waste bunch of hours.   Thanks, Vishal Mody

  Read the article

• Not All “Viruses” Are Viruses: 10 Malware Terms Explained

  - by Chris Hoffman

  Most people seem to call every type of malware a “virus”, but that isn’t technically accurate. You’ve probably heard of many more terms beyond virus: malware, worm, Trojan, rootkit, keylogger, spyware, and more. But what do all these terms mean? These terms aren’t just used by geeks. They make their way into even mainstream news stories about the latest web security problems and tech scares. Understanding them will help you understand the dangers your\ hear about. Malware The word “malware” is short for “malicious software.” Many people use the word “virus” to indicate any type of harmful software, but a virus is actually just a specific type of malware. The word “malware” encompasses all harmful software, including all the ones listed below. Virus Let’s start with viruses. A virus is a type of malware that copies itself by infecting other files,  just as viruses in the real world infect biological cells and use those biological cells to reproduce copies of themselves. A virus can do many different things — watch in the background and steal your passwords, display advertisements, or just crash your computer — but the key thing that makes it a virus is how it spreads. When you run a virus, it will infect programs on your computer. When you run the program on another computer, the virus will infect programs on that computer, and so on. For example, a virus might infect program files on a USB stick. When the programs on that USB stick are run on another computer, the virus runs on the other computer and infects more program files. The virus will continue to spread in this way. Worm A worm is similar to a virus, but it spreads a different way. Rather than infecting files and relying on human activity to move those files around and run them on different systems, a worm spreads over computer networks on its own accord. For example, the Blaster and Sasser worms spread very quickly in the days of Windows XP because Windows XP did not come properly secured and exposed system services to the Internet. The worm accessed these system services over the Internet, exploited a vulnerability, and infected the computer. The worm then used the new infected computer to continue replicating itself. Such worms are less common now that Windows is properly firewalled by default, but worms can also spread in other ways — for example, by mass-emailing themselves to every email address in an effected user’s address book. Like a virus, a worm can do any number of other harmful things once it infects a computer. The key thing that makes it a worm is simply how it spreads copies of itself. Trojan (or Trojan Horse) A Trojan horse, or Trojan, is a type of malware that disguises itself as a legitimate file. When you download and run the program, the Trojan horse will run in the background, allowing third-parties to access your computer. Trojans can do this for any number of reasons — to monitor activity on your computer, to join your computer to a botnet. Trojans may also be used to open the floodgates and download many other types of malware onto your computer. The key thing that makes this type of malware a Trojan is how it arrives. It pretends to be a useful program and, when run, it hides in the background and gives malicious people access to your computer. It isn’t obsessed with copying itself into other files or spreading over the network, as viruses and worms are. For example, a piece of pirated software on an unscrupulous website may actually contain a Trojan. Spyware Spyware is a type of malicious software that spies on you without your knowledge. It collects a variety of different types of data, depending on the piece of spyware. Different types of malware can function as spyware — there may be malicious spyware included in Trojans that spies on your keystrokes to steal financial data, for example. More “legitimate” spyware may be bundled along with free software and simply monitor your web browsing habits, uploading this data to advertising servers so the software’s creator can make money from selling their knowledge of your activities. Adware Adware often comes along with spyware. It’s any type of software that displays advertising on your computer. Programs that display advertisements inside the program itself aren’t generally classified as malware. The kind of “adware” that’s particularly malicious is the kind that abuses its access to your system to display ads when it shouldn’t. For example, a piece of harmful adware may cause pop-up advertisements to appear on your computer when you’re not doing anything else. Or, adware may inject additional advertising into other web pages as you browse the web. Adware is often combined with spyware — a piece of malware may monitor your browsing habits and use them to serve you more targeted ads. Adware is more “socially acceptable” than other types of malware on Windows and you may see adware bundled with legitimate programs. For example, some people consider the Ask Toolbar included with Oracle’s Java software adware. Keylogger A keylogger is a type of malware that runs in the background, recording every key stroke you make. These keystrokes can include usernames, passwords, credit card numbers, and other sensitive data. The keylogger then, most likely, uploads these keystrokes to a malicious server, where it can be analyzed and people can pick out the useful passwords and credit card numbers. Other types of malware can act as keyloggers. A virus, worm, or Trojan may function as a keylogger, for example. Keyloggers may also be installed for monitoring purposes by businesses or even jealous spouses. Botnet, Bot A botnet is a large network of computers that are under the botnet creator’s control. Each computer functions as a “bot” because it’s infected with a specific piece of malware. Once the bot software infects the computer, ir will connect to some sort of control server and wait for instructions from the botnet’s creator. For example, a botnet may be used to initiate a DDoS (distributed denial of service) attack. Every computer in the botnet will be told to bombard a specific website or server with requests at once, and such millions or requests can cause a server to become unresponsive or crash. Botnet creators may sell access to their botnets, allowing other malicious individuals to use large botnets to do their dirty work. Rootkit A rootkit is a type of malware designed to burrow deep into your computer, avoiding detection by security programs and users. For example, a rootkit might load before most of Windows, burying itself deep into the system and modifying system functions so that security programs can’t detect it. A rootkit might hide itself completely, preventing itself from showing up in the Windows task manager. The key thing that makes a type of malware a rootkit is that it’s stealthy and focused on hiding itself once it arrives. Ransomware Ransomware is a fairly new type of malware. It holds your computer or files hostage and demands a ransom payment. Some ransomware may simply pop up a box asking for money before you can continue using your computer. Such prompts are easily defeated with antivirus software. More harmful malware like CryptoLocker literally encrypts your files and demands a payment before you can access them. Such types of malware are dangerous, especially if you don’t have backups. Most malware these days is produced for profit, and ransomware is a good example of that. Ransomware doesn’t want to crash your computer and delete your files just to cause you trouble. It wants to take something hostage and get a quick payment from you. So why is it called “antivirus software,” anyway? Well, most people continue to consider the word “virus” synonymous with malware as a whole. Antivirus software doesn’t just protect against viruses, but against all types of malware. It may be more accurately referred to as “antimalware” or “security” software. Image Credit: Marcelo Alves on Flickr, Tama Leaver on Flickr, Szilard Mihaly on Flickr     

  Read the article

• Salesforce.com s'attaque à Oracle avec Database.com, un service qui veut devenir « l'avenir des bases de données »

  Salesforce.com s'attaque à Oracle avec Database.com Une base de données 100 % hébergée qui veut révolutionner les SGBD Lors de sa conférence Dreamforce, qui se déroule actuellement à San Francisco, Salesforce.com, le plus célèbre éditeur de CRM en mode Cloud, vient de présenter un produit extrêmement ambitieux, qualifié par la société d'« avenir des bases de données ». Il s'agit de Database.com, le premier SGBD 100 % Cloud. La plate-forme veut supprimer les problématiques de l'optimisation et de la maintenance des bases de données et du matériel traditionnels. « Les bases de données Cloud représentent une opportunité majeure pour faciliter ...

  Read the article

• How would you implement API key in WCF Data Service?

  - by rushonerok

  Is there a way to require an API key in the URL / or some other way of passing the service a private key in order to grant access to the data? I have this right now... using System; using System.Data.Services; using System.Data.Services.Common; using System.Collections.Generic; using System.Linq; using System.ServiceModel.Web; using Numina.Framework; using System.Web; using System.Configuration; [System.ServiceModel.ServiceBehavior(IncludeExceptionDetailInFaults = true)] public class odata : DataService { public static void InitializeService(DataServiceConfiguration config) { config.SetEntitySetAccessRule("*", EntitySetRights.AllRead); //config.SetServiceOperationAccessRule("*", ServiceOperationRights.All); config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; } protected override void OnStartProcessingRequest(ProcessRequestArgs args) { HttpRequest Request = HttpContext.Current.Request; if(Request["apikey"] != ConfigurationManager.AppSettings["ApiKey"]) throw new DataServiceException("ApiKey needed"); base.OnStartProcessingRequest(args); } } ...This works but it's not perfect because you cannot get at the metadata and discover the service through the Add Service Reference explorer. I could check if $metadata is in the url but it seems like a hack. Is there a better way?

  Read the article

• How to write an asmx web service without using app_code directory?

  - by JL

  Excuse the title, but it's best I just explain the problem. I have 2 projects in my solution A Class Library A Web Application, which consists of a web service (asmx). the web service has code sitting in the app_code folder, with a file [webservicename].cs Inside the webservice code behind class, I have a web method here is a sample example (its simplified): [WebMethod] public EnumTaskExportState ProcessTask() { var tm = new UploadTaskManager(); return tm.ProcessTask(); } Now at design time, in visual studio (2010 or 2008), when I right click on UploadTaskMananger, and then select "Go to definition". I get taken to AppData\Temp[some folder structure]...etc.... and it displays the public class definition. Instead I would like to have complete integration, so that I get taken directly to the actual class in the class library project. My guess is, this is happening because I am using the app_code route, and not a compiled file for the web service class. But I don't know any other way to do this. How can I fix this? Possibly do away with the need for the app_code directory?

  Read the article

< Previous Page | 338 339 340 341 342 343 344 345 346 347 348 349  | Next Page >