Search Results

Search found 11015 results on 441 pages for 'explain plan'.

Page 343/441 | < Previous Page | 339 340 341 342 343 344 345 346 347 348 349 350  | Next Page >

  • NOTEPAD++ Need macro or typeitin for automation of large lists

    - by user2526699
    I'm sure there is a way to do this but I can not seem to figure it out. I will try my best to explain this. I have a list with 20,000 lines in notepad++. I have two tabs open in notepad++. The right side tab is the main list. The left side tab is what needs to be added to the beginning of each line in the right tab. Here is an image of my notepad++ to give you a better understanding. I need to be able to do the following in an automated way as I have over 20,000 lines to do this way. copy line 1 of tab 'new 7' switch to tab 'new 6' paste clipboard(line 1 of tab 'new 7') at beginning of line 1 tab 'new 6' switch back to tab 'new 7' copy line 2 of tab 'new 7' switch to tab 'new 6' paste clipboard(line 2 of tab 'new 7') at beginning of line 2 tab 'new 6' I have both pasteitin and typeitin download but if i need some other program/app or if it's built in to notepad++ that would be great. I need to do this by the program itself or for me to only have to press a button to do each of these.

    Read the article

  • Is Google tracking our web history even when we do not visit Google or if affiliate websites?

    - by Anoyon-12
    I have recently updated to Google Chrome 29.0.1547.76. And when I click a the new tab button there is a new homepage now. Ok. My current settings forbid from third party cookies being set. And I clear all of my browsing data every time I close or well if its been too long browsing. Ok so there is this help dialog that appears first time you open the new tab page. What I did was Cleared all my browsing settings (From Beginning of time) and then again I went to the new tab, the Help dialog appears. And for the third time I did the same and the Same thing Happened. So For the fourth time I cleared all my Browsing data. Clicked open new tab and then. navigate myself to chrome://settings/cookies. and there were So does this mean google is tracking our web History just for using Chrome. I know Its not Illegal because these cookies only appear when you click the new tab Google Chrome 29.0.1547.76. maybe that was the reason google redesigned the entire New:tab page. From this Google is forcing us to allow them track us. I don't want to set another page as my new:tab page. I just want the old one. Google has a long History of invading Privacy without users consent. There was that Safari incident. I am sure you people remember. So can anyone tell me about this issue? I maybe wrong. So please explain.

    Read the article

  • Very diferent results from df after a few seconds

    - by tatus2
    When the backup moves the files from one server to the other the results from df change every few seconds in an impossible manner. The source host is running rsync. On the destination host I'm running the following command every few seconds: echo `date` `df|grep md0` Results are below: Sat Jun 29 23:57:12 CEST 2013 /dev/md0 4326425568 579316100 3527339636 15% /MD0 Sat Jun 29 23:57:14 CEST 2013 /dev/md0 4326425568 852513700 3254142036 21% /MD0 Sat Jun 29 23:57:15 CEST 2013 /dev/md0 4326425568 969970340 3136685396 24% /MD0 Sat Jun 29 23:57:17 CEST 2013 /dev/md0 4326425568 1255222180 2851433556 31% /MD0 Sat Jun 29 23:57:20 CEST 2013 /dev/md0 4326425568 1276006720 2830649016 32% /MD0 Sat Jun 29 23:57:24 CEST 2013 /dev/md0 4326425568 1355440016 2751215720 34% /MD0 Sat Jun 29 23:57:26 CEST 2013 /dev/md0 4326425568 1425090960 2681564776 35% /MD0 Sat Jun 29 23:57:27 CEST 2013 /dev/md0 4326425568 1474601872 2632053864 36% /MD0 Sat Jun 29 23:57:28 CEST 2013 /dev/md0 4326425568 1493627384 2613028352 37% /MD0 Sat Jun 29 23:57:32 CEST 2013 /dev/md0 4326425568 615934400 3490721336 15% /MD0 Sat Jun 29 23:57:33 CEST 2013 /dev/md0 4326425568 636071360 3470584376 16% /MD0 As you can see I start from USE of 15% and after 15 seconds I'm at 37% (I don't need to mention that the backup can not copy this huge amount of data in such a short time). After ~20 seconds the cycle closes. I'm again roughly at the same usage as earlier. The value is reasonable, ca. 35 Mb were copied. Can somebody explain to me what is going on? Does df only make an estimation of usage instead of used value?

    Read the article

  • JPA : optimize EJB-QL query involving large many-to-many join table

    - by Fabien
    Hi all. I'm using Hibernate Entity Manager 3.4.0.GA with Spring 2.5.6 and MySql 5.1. I have a use case where an entity called Artifact has a reflexive many-to-many relation with itself, and the join table is quite large (1 million lines). As a result, the HQL query performed by one of the methods in my DAO takes a long time. Any advice on how to optimize this and still use HQL ? Or do I have no choice but to switch to a native SQL query that would perform a join between the table ARTIFACT and the join table ARTIFACT_DEPENDENCIES ? Here is the problematic query performed in the DAO : @SuppressWarnings("unchecked") public List<Artifact> findDependentArtifacts(Artifact artifact) { Query query = em.createQuery("select a from Artifact a where :artifact in elements(a.dependencies)"); query.setParameter("artifact", artifact); List<Artifact> list = query.getResultList(); return list; } And the code for the Artifact entity : package com.acme.dependencytool.persistence.model; import java.util.ArrayList; import java.util.List; import javax.persistence.CascadeType; import javax.persistence.Column; import javax.persistence.Entity; import javax.persistence.FetchType; import javax.persistence.GeneratedValue; import javax.persistence.Id; import javax.persistence.JoinColumn; import javax.persistence.JoinTable; import javax.persistence.ManyToMany; import javax.persistence.Table; import javax.persistence.UniqueConstraint; @Entity @Table(name = "ARTIFACT", uniqueConstraints={@UniqueConstraint(columnNames={"GROUP_ID", "ARTIFACT_ID", "VERSION"})}) public class Artifact { @Id @GeneratedValue @Column(name = "ID") private Long id = null; @Column(name = "GROUP_ID", length = 255, nullable = false) private String groupId; @Column(name = "ARTIFACT_ID", length = 255, nullable = false) private String artifactId; @Column(name = "VERSION", length = 255, nullable = false) private String version; @ManyToMany(cascade=CascadeType.ALL, fetch=FetchType.EAGER) @JoinTable( name="ARTIFACT_DEPENDENCIES", joinColumns = @JoinColumn(name="ARTIFACT_ID", referencedColumnName="ID"), inverseJoinColumns = @JoinColumn(name="DEPENDENCY_ID", referencedColumnName="ID") ) private List<Artifact> dependencies = new ArrayList<Artifact>(); public Long getId() { return id; } public void setId(Long id) { this.id = id; } public String getGroupId() { return groupId; } public void setGroupId(String groupId) { this.groupId = groupId; } public String getArtifactId() { return artifactId; } public void setArtifactId(String artifactId) { this.artifactId = artifactId; } public String getVersion() { return version; } public void setVersion(String version) { this.version = version; } public List<Artifact> getDependencies() { return dependencies; } public void setDependencies(List<Artifact> dependencies) { this.dependencies = dependencies; } } Thanks in advance. EDIT 1 : The DDLs are generated automatically by Hibernate EntityMananger based on the JPA annotations in the Artifact entity. I have no explicit control on the automaticaly-generated join table, and the JPA annotations don't let me explicitly set an index on a column of a table that does not correspond to an actual Entity (in the JPA sense). So I guess the indexing of table ARTIFACT_DEPENDENCIES is left to the DB, MySQL in my case, which apparently uses a composite index based on both clumns but doesn't index the column that is most relevant in my query (DEPENDENCY_ID). mysql describe ARTIFACT_DEPENDENCIES; +---------------+------------+------+-----+---------+-------+ | Field | Type | Null | Key | Default | Extra | +---------------+------------+------+-----+---------+-------+ | ARTIFACT_ID | bigint(20) | NO | MUL | NULL | | | DEPENDENCY_ID | bigint(20) | NO | MUL | NULL | | +---------------+------------+------+-----+---------+-------+ EDIT 2 : When turning on showSql in the Hibernate session, I see many occurences of the same type of SQL query, as below : select dependenci0_.ARTIFACT_ID as ARTIFACT1_1_, dependenci0_.DEPENDENCY_ID as DEPENDENCY2_1_, artifact1_.ID as ID1_0_, artifact1_.ARTIFACT_ID as ARTIFACT2_1_0_, artifact1_.GROUP_ID as GROUP3_1_0_, artifact1_.VERSION as VERSION1_0_ from ARTIFACT_DEPENDENCIES dependenci0_ left outer join ARTIFACT artifact1_ on dependenci0_.DEPENDENCY_ID=artifact1_.ID where dependenci0_.ARTIFACT_ID=? Here's what EXPLAIN in MySql says about this type of query : mysql explain select dependenci0_.ARTIFACT_ID as ARTIFACT1_1_, dependenci0_.DEPENDENCY_ID as DEPENDENCY2_1_, artifact1_.ID as ID1_0_, artifact1_.ARTIFACT_ID as ARTIFACT2_1_0_, artifact1_.GROUP_ID as GROUP3_1_0_, artifact1_.VERSION as VERSION1_0_ from ARTIFACT_DEPENDENCIES dependenci0_ left outer join ARTIFACT artifact1_ on dependenci0_.DEPENDENCY_ID=artifact1_.ID where dependenci0_.ARTIFACT_ID=1; +----+-------------+--------------+--------+-------------------+-------------------+---------+---------------------------------------------+------+-------+ | id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra | +----+-------------+--------------+--------+-------------------+-------------------+---------+---------------------------------------------+------+-------+ | 1 | SIMPLE | dependenci0_ | ref | FKEA2DE763364D466 | FKEA2DE763364D466 | 8 | const | 159 | | | 1 | SIMPLE | artifact1_ | eq_ref | PRIMARY | PRIMARY | 8 | dependencytooldb.dependenci0_.DEPENDENCY_ID | 1 | | +----+-------------+--------------+--------+-------------------+-------------------+---------+---------------------------------------------+------+-------+ EDIT 3 : I tried setting the FetchType to LAZY in the JoinTable annotation, but I then get the following exception : Hibernate: select artifact0_.ID as ID1_, artifact0_.ARTIFACT_ID as ARTIFACT2_1_, artifact0_.GROUP_ID as GROUP3_1_, artifact0_.VERSION as VERSION1_ from ARTIFACT artifact0_ where artifact0_.GROUP_ID=? and artifact0_.ARTIFACT_ID=? 51545 [btpool0-2] ERROR org.hibernate.LazyInitializationException - failed to lazily initialize a collection of role: com.acme.dependencytool.persistence.model.Artifact.dependencies, no session or session was closed org.hibernate.LazyInitializationException: failed to lazily initialize a collection of role: com.acme.dependencytool.persistence.model.Artifact.dependencies, no session or session was closed at org.hibernate.collection.AbstractPersistentCollection.throwLazyInitializationException(AbstractPersistentCollection.java:380) at org.hibernate.collection.AbstractPersistentCollection.throwLazyInitializationExceptionIfNotConnected(AbstractPersistentCollection.java:372) at org.hibernate.collection.AbstractPersistentCollection.readSize(AbstractPersistentCollection.java:119) at org.hibernate.collection.PersistentBag.size(PersistentBag.java:248) at com.acme.dependencytool.server.DependencyToolServiceImpl.createArtifactViewBean(DependencyToolServiceImpl.java:93) at com.acme.dependencytool.server.DependencyToolServiceImpl.createArtifactViewBean(DependencyToolServiceImpl.java:109) at com.acme.dependencytool.server.DependencyToolServiceImpl.search(DependencyToolServiceImpl.java:48) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.google.gwt.user.server.rpc.RPC.invokeAndEncodeResponse(RPC.java:527) at com.google.gwt.user.server.rpc.RemoteServiceServlet.processCall(RemoteServiceServlet.java:166) at com.google.gwt.user.server.rpc.RemoteServiceServlet.doPost(RemoteServiceServlet.java:86) at javax.servlet.http.HttpServlet.service(HttpServlet.java:637) at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:487) at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:362) at org.mortbay.jetty.security.SecurityHandler.handle(SecurityHandler.java:216) at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181) at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:729) at org.mortbay.jetty.webapp.WebAppContext.handle(WebAppContext.java:405) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152) at org.mortbay.jetty.handler.RequestLogHandler.handle(RequestLogHandler.java:49) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152) at org.mortbay.jetty.Server.handle(Server.java:324) at org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:505) at org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:843) at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:647) at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:205) at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:380) at org.mortbay.io.nio.SelectChannelEndPoint.run(SelectChannelEndPoint.java:395) at org.mortbay.thread.QueuedThreadPool$PoolThread.run(QueuedThreadPool.java:488)

    Read the article

  • PHP - My array returns NULL values when placed in a function, but works fine outside of the function

    - by orbit82
    Okay, let me see if I can explain this. I am making a newspaper WordPress theme. The theme pulls posts from categories. The front page shows multiple categories, organized as "newsboxes". Each post should show up only ONCE on the front page, even if said post is in two or more categories. To prevent posts from duplicating on the front page, I've created an array that keeps track of the individual post IDs. When a post FIRST shows up on the front page, its ID gets added to the array. Before looping through the posts for each category, the code first checks the array to see which posts have ALREADY been displayed. OK, so now remember how I said earlier that the front page shows multiple categories organized as "newsboxes"? Well, these newsboxes are called onto the front page using PHP includes. I have 6 newsboxes appearing on the front page, and the code to call them is EXACTLY the same. I didn't want to repeat the same code 6 times, so I put all of the inclusion code into a function. The function works, but the only problem is that it screws up the duplicate posts code I mentioned earlier. The posts all repeat. Running a var_dump on the $do_not_duplicate variable returns an array with null indices. Everything works PERFECTLY if I don't put the code inside a function, but once I do put them in a function it's like the arrays aren't even connecting with the posts. Here is the code with the arrays. The key variables in question here include $do_not_duplicate[] = $post-ID, $do_not_duplicate and 'post__not_in' = $do_not_duplicate <?php query_posts('cat='.$settings['cpress_top_story_category'].'&posts_per_page='.$settings['cpress_number_of_top_stories'].'');?> <?php if (have_posts()) : ?> <!--TOP STORY--> <div id="topStory"> <?php while ( have_posts() ) : the_post(); $do_not_duplicate[] = $post->ID; ?> <a href="<?php the_permalink() ?>" rel="bookmark" title="Permanent Link to <?php the_title_attribute(); ?>"><?php the_post_thumbnail('top-story-thumbnail'); ?></a> <h2 class="extraLargeHeadline"><a href="<?php the_permalink() ?>" rel="bookmark" title="Permanent Link to <?php the_title_attribute(); ?>"><?php the_title(); ?></a></h2> <div class="topStory_author"><?php cpress_show_post_author_byline(); ?></div> <div <?php post_class('topStory_entry') ?> id="post-<?php the_ID(); ?>"> <?php if($settings['cpress_excerpt_or_content_top_story_newsbox'] == "content") { the_content(); ?><a href="<?php the_permalink(); ?>" title="<?php the_title_attribute(); ?>"><span class="read_more"><?php echo $settings['cpress_more_text']; ?></span></a> <?php } else { the_excerpt(); ?><a href="<?php the_permalink(); ?>" title="<?php the_title_attribute(); ?>"><span class="read_more"><?php echo $settings['cpress_more_text']; ?></span></a> <?php }?> </div><!--/topStoryentry--> <div class="topStory_meta"><?php cpress_show_post_meta(); ?></div> <?php endwhile; wp_reset_query(); ?> <?php if(!$settings['cpress_hide_top_story_more_stories']) { ?> <!--More Top Stories--><div id="moreTopStories"> <?php $category_link = get_category_link(''.$settings['cpress_top_story_category'].''); ?> <?php if (have_posts()) : ?> <?php query_posts( array( 'cat' => ''.$settings['cpress_top_story_category'].'', 'posts_per_page' => ''.$settings['cpress_number_of_more_top_stories'].'', 'post__not_in' => $do_not_duplicate ) ); ?> <h4 class="moreStories"> <?php if($settings['cpress_make_top_story_more_stories_link']) { ?> <a href="<?php echo $category_link; ?>" title="<?php echo strip_tags($settings['cpress_top_story_more_stories_text']);?>"><?php echo strip_tags($settings['cpress_top_story_more_stories_text']);?></a><?php } else { echo strip_tags($settings['cpress_top_story_more_stories_text']); } ?> </h4> <ul> <?php while( have_posts() ) : the_post(); $do_not_duplicate[] = $post->ID; ?> <li><h2 class="mediumHeadline"><a href="<?php the_permalink() ?>" rel="bookmark" title="Permanent Link to <?php the_title_attribute(); ?>"><?php the_title(); ?></a></h2> <?php if(!$settings['cpress_hide_more_top_stories_excerpt']) { ?> <div <?php post_class('moreTopStory_postExcerpt') ?> id="post-<?php the_ID(); ?>"><?php if($settings['cpress_excerpt_or_content_top_story_newsbox'] == "content") { the_content(); ?><a href="<?php the_permalink(); ?>" title="<?php the_title_attribute(); ?>"><span class="read_more"><?php echo $settings['cpress_more_text']; ?></span></a> <?php } else { the_excerpt(); ?> <a href="<?php the_permalink(); ?>" title="<?php the_title_attribute(); ?>"><span class="read_more"><?php echo $settings['cpress_more_text']; ?></span></a> <?php }?> </div><?php } ?> <div class="moreTopStory_postMeta"><?php cpress_show_post_meta(); ?></div> </li> <?php endwhile; wp_reset_query(); ?> </ul> <?php endif;?> </div><!--/moreTopStories--> <?php } ?> <?php echo(var_dump($do_not_duplicate)); ?> </div><!--/TOP STORY--> <?php endif; ?> And here is the code that includes the newsboxes onto the front page. This is the code I'm trying to put into a function to avoid duplicating it 6 times on one page. function cpress_show_templatebitsf($tbit_num, $tbit_option) { global $tbit_path; global $shortname; $settings = get_option($shortname.'_options'); //display the templatebits (usually these will be sidebars) for ($i=1; $i<=$tbit_num; $i++) { $tbit = strip_tags($settings[$tbit_option .$i]); if($tbit !="") { include_once(TEMPLATEPATH . $tbit_path. $tbit.'.php'); } //if }//for loop unset($tbit_option); } I hope this makes sense. It's kind of a complex thing to explain but I've tried many things to fix it and have had no luck. I'm stumped. I'm hoping it's just some little thing I'm overlooking because it seems like it shouldn't be such a problem.

    Read the article

  • Array structure returned by Yii's model

    - by user1104955
    I am a Yii beginner and am running into a bit of a wall and hope someone will be able to help me get back onto track. I think this might be a fairly straight forward question to the seasoned Yii user. So here goes... In the controller, let's say I run the following call to the model- $variable = Post::model()->findAll(); All works fine and I pass the variable into the view. Here's where I get pretty stuck. The array that is returned in the above query is far more complex than I anticipated and I'm struggling to make sense of it. Here's a sample- print_r($variable); gives- Array ( [0] => Post Object ( [_md:CActiveRecord:private] => CActiveRecordMetaData Object ( [tableSchema] => CMysqlTableSchema Object ( [schemaName] => [name] => tbl_post [rawName] => `tbl_post` [primaryKey] => id [sequenceName] => [foreignKeys] => Array ( ) [columns] => Array ( [id] => CMysqlColumnSchema Object ( [name] => id [rawName] => `id` [allowNull] => [dbType] => int(11) [type] => integer [defaultValue] => [size] => 11 [precision] => 11 [scale] => [isPrimaryKey] => 1 [isForeignKey] => [autoIncrement] => 1 [_e:CComponent:private] => [_m:CComponent:private] => ) [post] => CMysqlColumnSchema Object ( [name] => post [rawName] => `post` [allowNull] => [dbType] => text [type] => string [defaultValue] => [size] => [precision] => [scale] => [isPrimaryKey] => [isForeignKey] => [autoIncrement] => [_e:CComponent:private] => [_m:CComponent:private] => ) ) [_e:CComponent:private] => [_m:CComponent:private] => ) [columns] => Array ( [id] => CMysqlColumnSchema Object ( [name] => id [rawName] => `id` [allowNull] => [dbType] => int(11) [type] => integer [defaultValue] => [size] => 11 [precision] => 11 [scale] => [isPrimaryKey] => 1 [isForeignKey] => [autoIncrement] => 1 [_e:CComponent:private] => [_m:CComponent:private] => ) [post] => CMysqlColumnSchema Object ( [name] => post [rawName] => `post` [allowNull] => [dbType] => text [type] => string [defaultValue] => [size] => [precision] => [scale] => [isPrimaryKey] => [isForeignKey] => [autoIncrement] => [_e:CComponent:private] => [_m:CComponent:private] => ) ) [relations] => Array ( [responses] => CHasManyRelation Object ( [limit] => -1 [offset] => -1 [index] => [through] => [joinType] => LEFT OUTER JOIN [on] => [alias] => [with] => Array ( ) [together] => [scopes] => [name] => responses [className] => Response [foreignKey] => post_id [select] => * [condition] => [params] => Array ( ) [group] => [join] => [having] => [order] => [_e:CComponent:private] => [_m:CComponent:private] => ) ) [attributeDefaults] => Array ( ) [_model:CActiveRecordMetaData:private] => Post Object ( [_md:CActiveRecord:private] => CActiveRecordMetaData Object *RECURSION* [_new:CActiveRecord:private] => [_attributes:CActiveRecord:private] => Array ( ) [_related:CActiveRecord:private] => Array ( ) [_c:CActiveRecord:private] => [_pk:CActiveRecord:private] => [_alias:CActiveRecord:private] => t [_errors:CModel:private] => Array ( ) [_validators:CModel:private] => [_scenario:CModel:private] => [_e:CComponent:private] => [_m:CComponent:private] => ) ) [_new:CActiveRecord:private] => [_attributes:CActiveRecord:private] => Array ( [id] => 1 [post] => User Post ) [_related:CActiveRecord:private] => Array ( ) [_c:CActiveRecord:private] => [_pk:CActiveRecord:private] => 1 [_alias:CActiveRecord:private] => t [_errors:CModel:private] => Array ( ) [_validators:CModel:private] => [_scenario:CModel:private] => update [_e:CComponent:private] => [_m:CComponent:private] => ) ) [sorry if there's an easier way to show this array, I'm not aware of it] Can anyone explain to me why the model returns such a complex array? It doesn't seem to matter what tables or columns or relations are used in your application, they all seem to me to return this format. Also, can someone explain the structure to me so that I can isolate the variables that I want to recover? Many thanks in advance, Nick

    Read the article

  • Fatal error 9001 on shared SQL Server 2008

    - by user643192
    I've asked this same question on StackOverflow, but I might actually have a better chance for an answer here so am posting here as well. I know this question has been asked here before, but none of the suggestions have worked for me. I have an ASP.NET MVC (v. 3) website on a shared server. The website was working fine for a few weeks now, until I started getting a Fatal Error 9001 error straight after login. Because this is a shared server, there are only very limited things I can do with the database (and I don't know that much about databases anyway). The help desk insist that there is nothing wrong with their server. I got various suggestions from them: Upgrading to the business plan because I am out of space (first suggestion) Even though the .mdb file is small, the .ldb can grow very quickly. The .ldb file is probably taking up all the space. I have 100MB available, the database size is 16.5MB. Can the .ldb file take up the remaining space? On querying this with the helpdesk, they admitted that my entire db is only 25MB. There is something wrong with my SQL queries and I should check the website. I'm using EF with linq to SQL. Everything was working fine until now... Can there be something that goes wrong in the queries that causes this sort of error? There is nothing wrong to be seen in the db logs, so this error cannot possibly have happened. I should log it next time it happens and contact again. I found some posts suggesting that restoring a DB backup can get rid of the issue. I do not have a recent backup, and can't take a new one because of a fatal error 9001 occurring. Since this is a shared server I have about 0 authority to execute anything against the DB (think CHECKDB, truncating the log, etc.). So I am at my wits end pretty much. What else can I do/try to get my website moving again?

    Read the article

  • Will this RAID5 setup work (3TB Seagate Barracudas + Adaptec RAID 6405)?

    - by Slayer537
    As the title states, will this RAID combo work, and if not what needs to be changed? Overall opinions would be most helpful. I currently run a small file server of about 5TB or so. I keep outgrowing my needs and need to build a RAID setup that will allow me to expand as needed. I am new to RAID setups, especially one of the scale I have currently planned out, but I have being doing some research for the past couple of weeks and have come up with a build. Ideally, I'd have the setup completely built, but I'd like to keep the total cost around $1k and can't afford to go above $1.5k, so unfortunately that's not an option. 2 of my current drives are WD Caviar Blacks 2TB; however, I have recently learned that due to the lack of TLER those drives are awful for any RAID setup other than 0 or 1. That being said, my third drive is a Seagate Barracuda 3TB (ST300DM001) and I have found a RAID controller that states it supports it, so I'd like to use this same type of drive, if possible. Have any of you had any experience using this drive or a similar one in a RAID5 configuration? The manufacturer states that it supports it, but knowing that it is not an enterprise drive, I am slightly concerned that it could drop out of the array. I would just go with enterprise drives, but those are about double in cost... Parts list: Storage rack: http://www.ebay.com/itm/SGI-3U-Media-Storage-Server-16-Hard-Drive-Bay-SATA-SAS-Expander-Omnistor-SE3016-/140735776937?pt=LH_DefaultDomain_0&hash=item20c48188a9 3 more HDs (for now..): http://www.amazon.com/Seagate-Barracuda-3-5-Inch-Internal-ST3000DM001/dp/B005T3GRLY/ref=dp_return_2?ie=UTF8&n=172282&s=electronics Adaptec RAID 6405: http://www.newegg.com/Product/Product.aspx?Item=N82E16816103224 here's a link to the compatibility sheet if that helps: http://download.adaptec.com/pdfs/compatibility_report/arc-sas_cr_03-27-12_series6.pdf SAS expander cable: http://www.pc-pitstop.com/sas_cables_adapters/8887-2M.asp My plan is to install the RAID card in my computer and then route the SAS cable to the rack. Setup a RAID5 on 3 drives, transfer my data over from my other drive, and then add that drive to the array. Eventually, I'd like to get a 2U unit and run the file server on that and move the RAID card over to there, but that will have to happen later on. Side note: The computer the card would be going into will be running Windows 7 Pro with 24GB of DDR3-1600 and an i7-930.

    Read the article

  • Configuring VLAN's on two HP procurve switches

    - by pan
    Trying to route a new ISP (Microwave link) from one of my out buildings to my computer room and hence my firewall. Old ISP came direct into firewall. In the outbuilding the Microwave modem connects with cat5 to HP Procurve 2524 switch. Because this ISP is coming through my internal network, I plan on using a new vlan called "airspeed" only for this ISP traffic. Up until now I've just been using the Default_vlan on both HP switches (4108 + 2524). So far I've been unable to ping from my laptop to the ISP modem both of which are on the new vlan 2 ("Airspeed"). No traffic needs to cross from vlan 2 to vlan 1 so I've left the ports as untagged. I've used the subnet provide from my ISP as the new vlan 2 subnet. Can anybody see what I'm doing wrong here? I've added the configuration of both switch below. Rough diagram: Microwave modem (Gateway IP 77.75.00.49) | HP 2524 switch (port 24) | HP 2524 switch fibre link | HP 4108GL switch fibre link | HP 4108GL switch (port D1) | Laptop configured with IP 77.75.00.50 (for testing but will be connected to firewall) And my 4108GL config: ; J4865A Configuration Editor; Created on release #G.07.21 hostname "HP ProCurve Switch 4108GL" cdp run module 1 type J4864A module 2 type J4862B module 3 type J4862B module 4 type J4862B ip default-gateway 128.1.146.50 snmp-server community "public" Unrestricted snmp-server host 128.1.146.51 "public" Not-INFO snmp-server host 128.1.146.38 "public" vlan 1 name "DEFAULT_VLAN" untagged A1-A3,B1-B24,C1-C24,D2-D24 ip address 128.1.146.203 255.255.0.0 no untagged D1 exit vlan 2 name "Airspeed" untagged D1 ip address 77.75.00.51 255.255.255.248 exit Finally my 2524 config: ; J4813A Configuration Editor; Created on release #F.04.08 hostname "HP ProCurve Switch 2524" cdp run ip default-gateway 0.0.0.0 snmp-server community "public" Unrestricted snmp-server host 128.1.146.51 "public" Not-INFO snmp-server host 128.1.146.51 "public" snmp-server host 128.1.146.38 "public" vlan 1 name "DEFAULT_VLAN" untagged 1-23,25-26 no untagged 24 ip address 128.1.146.204 255.255.0.0 exit vlan 2 name "Airspeed" untagged 24 ip address 77.75.00.51 255.255.255.248 exit no aaa port-access authenticator active

    Read the article

  • Apache taking up too much CPU

    - by andrewtweber
    I'm trying to manage a server on Amazon for a network of sites that receives about 100 million pageviews per month. Unfortunately, nobody out of my team of 5 developers has much server admin experience. Right now we have the MaxClients set to 1400. Currently our traffic is about average, and we have 1150 total Apache processes running, which use about 2% CPU each! Out of those 1150, 800 of them are currently sleeping, but still taking up CPU. I'm sure there are ways to optimize this. I have a few thoughts: It appears Apache is creating a new process for every single connection. Is this normal? Is there a way to more quickly kill the sleeping processes? Should we turn KeepAlive on? Each page loads about 15-20 medium-sized graphics and a lot of javascript/css. So, here's our Apache setup. We do plan on contracting a server admin asap, but I would really appreciate some advice until we can find someone. Timeout 25 KeepAlive Off MaxKeepAliveRequests 200 KeepAliveTimeout 5 <IfModule prefork.c> StartServers 100 MinSpareServers 20 MaxSpareServers 50 ServerLimit 1400 MaxClients 1400 MaxRequestsPerChild 5000 </IfModule> <IfModule worker.c> StartServers 4 MaxClients 400 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> Full top output: top - 23:44:36 up 1 day, 6:43, 4 users, load average: 379.14, 379.17, 377.22 Tasks: 1153 total, 379 running, 774 sleeping, 0 stopped, 0 zombie Cpu(s): 71.9%us, 26.2%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 1.9%si, 0.0%st Mem: 70343000k total, 23768448k used, 46574552k free, 527376k buffers Swap: 0k total, 0k used, 0k free, 10054596k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1756 mysql 20 0 10.2g 1.8g 5256 S 19.8 2.7 904:41.13 mysqld 21515 apache 20 0 396m 18m 4512 R 2.1 0.0 0:34.42 httpd 21524 apache 20 0 396m 18m 4032 R 2.1 0.0 0:32.63 httpd 21544 apache 20 0 394m 16m 4084 R 2.1 0.0 0:36.38 httpd 21643 apache 20 0 396m 18m 4360 R 2.1 0.0 0:34.20 httpd 21817 apache 20 0 396m 17m 4064 R 2.1 0.0 0:38.22 httpd 22134 apache 20 0 395m 17m 4584 R 2.1 0.0 0:35.62 httpd 22211 apache 20 0 397m 18m 4104 R 2.1 0.0 0:29.91 httpd 22267 apache 20 0 396m 18m 4636 R 2.1 0.0 0:35.29 httpd 22334 apache 20 0 397m 18m 4096 R 2.1 0.0 0:34.86 httpd 22549 apache 20 0 395m 17m 4056 R 2.1 0.0 0:31.01 httpd 22612 apache 20 0 397m 19m 4152 R 2.1 0.0 0:34.34 httpd 22721 apache 20 0 396m 18m 4060 R 2.1 0.0 0:32.76 httpd 22932 apache 20 0 396m 17m 4020 R 2.1 0.0 0:37.34 httpd 22933 apache 20 0 396m 18m 4060 R 2.1 0.0 0:34.77 httpd 22949 apache 20 0 396m 18m 4060 R 2.1 0.0 0:34.61 httpd 22956 apache 20 0 402m 24m 4072 R 2.1 0.0 0:41.45 httpd

    Read the article

  • How to transition to Comcast with static IP address

    - by steveha
    I have my own email server in my house, on a static IP address. I have had business DSL for over a decade, but I also now have Comcast business Internet. I want to transition from the DSL to the Comcast, and I have some questions. I have a domain name, my own mail server, and a firewall (a PC with two network interfaces, running Devil-Linux). I need to make sure I understand how to set up the Comcast cable box, and how to set up my firewall. First, do I need to change any settings in the cable box? Currently I have only used the cable box by plugging in a laptop, with the laptop doing DHCP. I think I can leave the box alone but I would like to make sure. Second, I'm not sure I understand the instructions Comcast gave me for setting up the firewall. My DSL provider gave me the following information: static IP address, net mask, gateway, and two DNS servers. Comcast gave me: static IP address, routable static IP address, net mask, and two DNS servers, and told me to put the "static IP address" as the "gateway" on the firewall. Is this just Comcast-speak here? Does "routable static IP address" mean the same thing as "static IP address" in my DSL setup, the end-point address that I should publish in the DNS MX records for my email server? Or should I publish the "static IP address", and Comcast will then route all its traffic over the cable box? My plan is: first, I'm going to configure another firewall, so I have one firewall for the DSL and one for the Comcast (rather than madly editing settings to switch back and forth). Then I will publish the new Comcast static IP address as a backup email server address in the DNS MX records, wait a while to let it propagate, and then switch my home over from the DSL to the Comcast. Then I'll change DNS to make that the primary mail address and the DSL the secondary, let that go a while and make sure it seems reliable. Then I'll remove the DSL from the DNS MX records completely, and finally shut down the DSL service. (I thought about keeping the DSL as a backup, but the reason I'm leaving DSL is that it has become unreliable; and I have heard that Comcast business Internet is reliable.) Final question, any advice for me? Anything you think might be useful, helpful, or educational. Thanks.

    Read the article

  • How to transition to Comcast with static IP address [migrated]

    - by steveha
    I have my own email server in my house, on a static IP address. I have had business DSL for over a decade, but I also now have Comcast business Internet. I want to transition from the DSL to the Comcast, and I have some questions. I have a domain name, my own mail server, and a firewall (a PC with two network interfaces, running Devil-Linux). I need to make sure I understand how to set up the Comcast cable box, and how to set up my firewall. First, do I need to change any settings in the cable box? Currently I have only used the cable box by plugging in a laptop, with the laptop doing DHCP. I think I can leave the box alone but I would like to make sure. Second, I'm not sure I understand the instructions Comcast gave me for setting up the firewall. My DSL provider gave me the following information: static IP address, net mask, gateway, and two DNS servers. Comcast gave me: static IP address, routable static IP address, net mask, and two DNS servers, and told me to put the "static IP address" as the "gateway" on the firewall. Is this just Comcast-speak here? Does "routable static IP address" mean the same thing as "static IP address" in my DSL setup, the end-point address that I should publish in the DNS MX records for my email server? Or should I publish the "static IP address", and Comcast will then route all its traffic over the cable box? My plan is: first, I'm going to configure another firewall, so I have one firewall for the DSL and one for the Comcast (rather than madly editing settings to switch back and forth). Then I will publish the new Comcast static IP address as a backup email server address in the DNS MX records, wait a while to let it propagate, and then switch my home over from the DSL to the Comcast. Then I'll change DNS to make that the primary mail address and the DSL the secondary, let that go a while and make sure it seems reliable. Then I'll remove the DSL from the DNS MX records completely, and finally shut down the DSL service. (I thought about keeping the DSL as a backup, but the reason I'm leaving DSL is that it has become unreliable; and I have heard that Comcast business Internet is reliable.) Final question, any advice for me? Anything you think might be useful, helpful, or educational. Thanks.

    Read the article

  • dnsmasq acts as the DHCP server for selected nodes overriding the existing DHCP server on the same LAN?

    - by user183394
    I am trying to set up a small "lab" at home. Like many modern homes, I have a regular DSL service which comes with a 2Wire 3600HGV router, which acts also as a DHCP server. Since I would like to PXE boot a few computers in my "lab" The 2Wire is inflexible to adjustments that I want to do I have used dnsmasq at work so I would like to use dnsmasq as the DHCP server for the few nodes in my "lab" if feasible. In the dnsmasq man page, there is the following: [...] -K, --dhcp-authoritative (IPv4 only) Should be set when dnsmasq is definitely the only DHCP server on a network. It changes the behaviour from strict RFC compliance so that DHCP requests on unknown leases from unknown hosts are not ignored. This allows new hosts to get a lease without a tedious timeout under all circumstances. It also allows dnsmasq to rebuild its lease database without each client needing to reacquire a lease, if the database is lost. [...] As far as I know, the ISC DHCP server can use the following to do what I would like to accomplish: authoritative; [...] subnet 192.168.1.0 netmask 255.255.255.0 { host nb0 { # only give DHCP information to this computer: hardware ethernet e8:9a:8f:17:70:42; fixed-address 192.168.1.10; option subnet-mask 255.255.255.0; option routers 192.168.1.254; option domain-name-servers 192.168.1.254; # Non-essential DHCP options filename "/pxelinux.0"; } [...] But I much prefer dnsmasq's "all-in-one-ness". My question: do I have to couple the -K option with something else? As shown in the example above, the ISC DHCP server requires the mac addresses of managed nodes to be explicitly specified. Does dnsmasq have something similar? FYI, the machine on which I plan to run dnsmasq runs CentOS 6.3 64bit. It has a statically assigned IP address: 192.168.1.3.

    Read the article

  • Persistent Issues on small business network using Cisco 871W and Catalyst Express 500

    - by Ben Campbell
    Being the most qualified (read: still not qualified) to solve our persistant network issues, I've turned to serverfault for guidance. I've done some searching, reading related documentation on cisco.com and tried a bit of troubleshooting. Here is the config: 100mb synchronous connection from a business internet provider (tested multiple times at 100meg at the source) Cisco 871W wireless point & router is where the WAN connection starts (this serves all our wireless). The only wired connection in the 871W is the Catalyst switch listed below. Cisco Catalyst Express 500 (24TT) is where all the wired connections terminate. About 20 Windows workstations and servers (AD/Webservers only). Some services in EC2 including mail and other web servers/apps. I've been TOLD cabling internally should be gigabit-ready. Here are the problems: generally slow download rates from the internet to the desktop/laptop frequent "page cannot be displayed" errors in browsers-sometimes 3 or 4 reloads are necessary... often times CSS wont load or other content requiring the browser to connect to a different server. slow speed within the LAN from workstation to workstation copying files. I would expect extremely fast data transfer workstation to workstation / server to workstation in this simple network. Several things I need to admit: I'm not primarily a network guy. Funding is relatively low, I need to be the guy that finds the solution. I understand most of the terminology and most of the technology. Implementation is where I fail due to lack of experience. Getting to the point: I'm wondering whether experienced network admins think that our small network should be sufficiently served with our current hardware if configured properly... or if we should purchase new equipment and start fresh? If starting fresh is the plan, whatever that new equipment may be is a likely different question entirely. If I haven't provided enough information, I will happily do some troubleshooting and update with the results. I have experience using wireshark and some other tools. Please let me know what you think would be most helpful and thanks in advance. EDIT: I forgot to add that the Cisco applicance will not finish loading the SDM Express console. It hangs every time at the "populating modules... DHCP". It eventually crashes and closes. I've rebooted the hardware and this still happens.

    Read the article

  • Certain clients (IP range) can not ping server

    - by Logman
    I just virtualized a Windows 2003 Server SP2 x32. The server contained our help desk server (Spiceworks) and our anti virus management server (ESET RAC). The host computer actually contained the virtualized server originally; I created the vhd and then I wiped this system clean and installed Windows 2008 R2 x64 Datacenter and added the virtualized 2003 onto the Hyper-V 2008 R2 Server. I got the server running fine except for... certain ip ranges. Local clients can get updates from the AV server from my 192.168.180.xxx & 192.168.181.xxx BUT NOT from any 192.168.182.xxx, 192.168.183.xxx, 192.168.184.xxx etc... I can not ping the server from any clients except for the 180. & 181. ranges. Now I created 2 other virtualized servers (win2008 & a win7 pro) and they exist on the same virtual host as the 2003 server. And at first I could not ping those until I went to the "\Network and Sharing Center\Advanced sharing settings" and Turned On File and Print Sharing. Then I could ping and access those virtualized guests. Win2003 server isn't quite the same. But I am sure I have it on. But now when I ping from a client on one of those ranges that would not work I get this: As you can see the ping leaves our network. We have 2 ad/dns servers (one 180. & the other in the 181. range). Is it DNS? Both AD/DNS servers are Windows 2003. And we plan on upgrading both to 2008 R2 within a month or two but I need to fix this issue pronto (esp the AV end). btw, I did rename that 2003 Server (Spiceworks/AV) hostname. And I tried a CNAME. But I do not think that is the problem. EDIT: OR because this server existed on this hardware/computer before becoming virtualized?

    Read the article

  • Web Site Serving, Cloud-Computing, oh, my

    - by Frank
    I'm planning a software based service. To give it a bit of context (type of traffic), assume it similar to facebook in nature (with a little GitHub thrown in). I've been trying to understand my different hosting options. I've been using a shared host with GoDaddy for years just fine. I currently host a Wordpress web site there and I've not had any problems. Quite frankly, they've taken good care of me. However, the nature of a shared hosting environment is limited in nature. For example, I can't do anything but host a web site there. For example, I can not run a Mercurial server. Last time I attempted to build a web application with the intention of eventually launching it via GoDaddy, I ran in to all sorts of troubles because it was shared-hosted. Assembly issues, etc. At the time, the cost and time sank my project. (The lack of direct access was also frustrating.) (to be fair to godaddy, this was over 3 years ago) I've been looking at Rackspace or Amazon as a possible cloud solution but it seems to be just processing power and bandwidth (and an OS). From what I understand, I'd need to get Apache and MySQL Working on my own. The way cloud hosting is priced, however, seems appealing. I figure my final option might be to use a virtual private host. I think this would be more flexible than a shared-host site but less scalable than a cloud based server. So, I guess my question is what is an appropriate solution for someone who intends to build a web application service? I figure that I need to establish a hosting environment now rather than later so I can plan to effectively use the environment. I'd prefer to be fairly economical to start out with. I really can't afford to pay $999 (or even $99) while I build up the site and get the core functionality online but at the same time, I'd like to have the selected environment grow as needed. Thank you.

    Read the article

  • Windows: Impact of clean install Service Pack 2 to applications & data?

    - by Thomas Matthews
    My Windows Vista Home Premium system is corrupt and won't install Service Pack 2. I have followed all the advice from Microsoft and still no luck. I would like to perform a clean install of Vista, then SP1, and then SP2. My concern is the effect of the clean install on the registry, my apps and all my data. My plan: 1. Download Vista Service Pack 1 (SP1) ISO and write to DVD. 2. Download Vista Service Pack 2 (SP2) ISO and write to DVD. 3. Backup all data, applications and registry to external hard drive (file copy not disk image) 4. ?? Format hard drive?? (is this necessary?) 5. Install Vista from DVDs / CDs. 6. Install SP1 from DVD 7. Install SP2 from DVD 8. Restore registry, applications and data from external hard drive. My questions: 1. Is formatting the hard drive a necessary step? 2. Will restoring the registry from the backup corrupt the system? 3. Should I use Windows Backup or ZIP/RAR? 4. Any gotcha's that I should look out for? Background: I am using Windows Vista Home Premium with SP1. The sfc program does not finish due to a resources problem (even when run as administrator). I have 5 users on it. After a while, the screen goes black and shows an error message window about an error with login.scr. Standard accounts display a black screen and can't run any applications. Administrative accounts have no problems (even standard accounts when converted to Administrative have no problem). The CBS log contains a lot of 0x8000ffff and E_UNEXPECTED errors (which Microsoft defines as catastrophic failure). This is the reasoning behind performing a clean install up to service pack 2.

    Read the article

  • TeamSpeak 3 Disconnects

    - by ArchUser
    I've recently had a few random TS3 mass disconnects and I'm am curious to know where I may find any applications that can help me determine the cause of any types of TS3 server disconnections as we plan on having many more users in the future. I run an almost empty VPS (OpenVZ) server with an ArchLinux template on it. I have 1.5/2GB of RAM, 2GHz of CPU and plenty of hard drive space, to run for the most part, just my TS3 and a low traffic apache web server. This is what I am investigating. 2011-02-04 06:07:05.130343|INFO |VirtualServer | 1| client disconnected 'Valamoor'(id:224) reason 'reasonmsg=connection lost' 2011-02-04 06:07:05.131338|INFO |VirtualServer | 1| client disconnected 'Kevrow'(id:19? reason 'reasonmsg=connection lost' 2011-02-04 06:07:05.191849|INFO |VirtualServer | 1| client disconnected 'scuba'(id:200) reason 'reasonmsg=connection lost' 2011-02-04 06:07:05.192633|INFO |VirtualServer | 1| client disconnected '[Ash] Setna'(id:75) reason 'reasonmsg=connection lost' 2011-02-04 06:07:05.193350|INFO |VirtualServer | 1| client disconnected 'Akiris'(id:254) reason 'reasonmsg=connection lost' 2011-02-04 06:07:05.194047|INFO |VirtualServer | 1| client disconnected 'Marcus'(id:25? reason 'reasonmsg=connection lost' 2011-02-04 06:07:05.194726|INFO |VirtualServer | 1| client disconnected 'Guthry'(id:275) reason 'reasonmsg=connection lost' 2011-02-04 07:18:50.327071|INFO |VirtualServer | 1| client disconnected 'Valamoor'(id:224) reason 'reasonmsg=connection lost' 2011-02-04 07:18:51.339018|INFO |VirtualServer | 1| client disconnected 'Marcus'(id:25? reason 'reasonmsg=connection lost' 2011-02-04 07:18:51.339870|INFO |VirtualServer | 1| client disconnected '[Ash] Setna'(id:75) reason 'reasonmsg=connection lost' 2011-02-04 07:18:51.340515|INFO |VirtualServer | 1| client disconnected 'Guthry'(id:275) reason 'reasonmsg=connection lost' 2011-02-05 04:55:20.797353|INFO |VirtualServer | 1| client disconnected 'JohnyRingo'(id:240) reason 'reasonmsg=connection lost' 2011-02-05 04:55:20.798517|INFO |VirtualServer | 1| client disconnected 'Maloo roots'(id:196) reason 'reasonmsg=connection lost' 2011-02-05 04:55:20.799314|INFO |VirtualServer | 1| client disconnected 'Cpt dravyn'(id:234) reason 'reasonmsg=connection lost' 2011-02-05 04:55:20.839254|INFO |VirtualServer | 1| client disconnected 'scuba'(id:200) reason 'reasonmsg=connection lost' etc... I need to determine if it is my hosting provider or my server, and what tools I can use to determine the issues. My VPS host has told me this... "I checked out the node that your VPS runs on and there is no abnormal system load, or I/O wait from the drive. I also checked the bandwidth history from the server and there have been no spikes or outages."

    Read the article

  • What are the pros and cons of AWS Elastic Beanstalk compared with other deployment strategies?

    - by James van Dyke
    I'm pretty new to the whole Netflix OSS stack and deployments in general. As a background for my current level of knowledge ops-wise, my main role is as a front-end application engineer. However, I enjoy the operations side of things, so I'm attempting to setup a new deployment strategy and the tooling for a new project. Our Goals Super easy deploys (we want to push a button to update production) Automated deploys to test environments (using Jenkins) Ease of maintenance (we have an app to write, don't want to spend our time fiddling with production issues) Ability to handle a service oriented architecture (many small apps, various languages and data stores) Enough flexibility to ensure we won't have to change strategies any time soon (we're already trying to get away from RightScale) We're OK with a little more initial setup time if doing so will save us some headaches in the future. So, along these lines, I've been listening to podcasts, watching Ops talks, and reading tons of blog posts and based on our goals and what I've taken to be some forming best practices, we've started forming a plan using Asgard, rolling our package into a jar and rolling that into an AMI. We had this all planned out and like the advantages the process versus using a Chef server and converging instances on the fly (we felt this was error prone given our limited timeline and lack of understanding around a Chef server workflow). However, a coworker did a little looking around on his own and felt like Elastic Beanstalk met our needs. I've looked into it and spun up a test environment with a WAR file and an attached RDS database. Things seem to work and I believe that we can automate deploys to a testing environment using Jenkins via the AWS API. Seems simple enough... perhaps too simple. What I'm wondering is, what's the catch? If Elastic Beanstalk is so simple and effective, why isn't it talked about more? I'm having a hard time finding enough objective opinions and facts about the two different deployment strategies, so I thought I'd ask around. Do you use Elastic Beanstalk? If so, why and what factors lead to that decision? What do you like and dislike? If you don't use Elastic Beanstalk but considered it, what do you use and why didn't you use Elastic Beanstalk? What are the advantages and disadvantages to a Elastic Beanstalk based deployment strategy for an SOA? That is, will Elastic Beanstalk work well with many small applications that rely on each other to work?

    Read the article

  • How to move Mailboxes over from old Exchange 2007 to new EBS 2008 network?

    - by Qwerty
    This q is similar to: http://serverfault.com/questions/39070/how-to-move-exchange-2003-mailbox-or-store-from-2003-to-2007-on-separate-networks Basically I am trying to move our exchange mailboxes over to a test domain that is hosting EBS2008 with Exchange 2007. We plan to move as soon as we can when we have our exchange data over. I have tried moving a db with mailboxes over but cannot get it to mount in the new Exchange in any way possible, including mounting it onto a recovery store. From my understanding the ONLY prerequisite for moving Exchange DBs across is that it must have the same Organizational name (unlike previous versions of Exchange). If anyone has any insight as to why I cannot mount and simply reattach the mailboxes, please give me an idea as to what could be wrong. It should be as simple as this. Note that the DBs I have are in a clean state. I cannot use ExMerge because I am not running any mailboxes on 2003. I have also tried using a 32bit Vista machine with the Export-Mailbox cmdlet to extract mailboxes but anything I do to it results in Permission errors. I have tried to troubleshoot these with no success. I am running in full admin with proper exchange roles and yet it still gives me access denied errors: Export-Mailbox : MapiExceptionNetworkError: Unable to make admin interface conn ection to server. (hr=0x80040115, ec=-2147221227) Also some errors show in the management console: get-MailboxDatabase Completed Warning: ERROR: Could not connect to the Microsoft Exchange Information Store service on server TATOOINE.baytech.local. One of the following problems may be occurring: 1- The Microsoft Exchange Information Store service is not running. 2- There is no network connectivity to server TATOOINE.baytech.local. 3- You do not have sufficient permissions to perform this command. The following permissions are required to perform this command: Exchange View-Only Administrator and local administrators group for the target server. 4- Credentials have been cached for an unpriviledged user. Try removing the entry for this server from Stored User Names and Passwords. Why I have to use a 32bit machine to export a simple .pst file is beyond me... So yeah I am now out of ideas and any help would be great! Thanks in advance.

    Read the article

  • Resizing Partitions on Live RHEL/cPanel Server

    - by Timothy R. Butler
    I've resized many partitions over the years on Linux, Windows and Mac OS X -- but always using a GUI. However, the time has come where the preset partition sizes my data center placed on my server aren't the right sizes and I need to resize a production server's disks. I could fiddle with it and probably do OK, but given that it is a production server, I wanted to get some advice about the right way to do this. I do have KVM over IP access, so if it is best to take the server offline and boot off a rescue partition, I can do that. root [/var/lib/mysql]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 9.9G 2.1G 7.3G 23% / tmpfs 7.8G 0 7.8G 0% /dev/shm /dev/sda1 99M 77M 18M 82% /boot /dev/sda8 884G 463G 376G 56% /home /dev/sda3 9.9G 8.0G 1.5G 85% /usr /dev/sda5 9.9G 9.1G 308M 97% /var /usr/tmpDSK 2.0G 38M 1.8G 3% /tmp As you can see /var and /usr are quite close to being full and I've actually had to symlink some logs on /usr to directories in /home to balance things out. What I would like to do is to add 6-10 GB each to /usr and /var, presumably taking the space from /home. As I think about how the disk is arranged, the best thought I've come up with is to reduce /home by 16 GB, say, and move /var to the spot freed up, then allocating /var's space to /usr. However, that would put /var at the far end of the disk, which seems less than idea, given that MySQL has all of its data on that partition. I'd love to take the space out of the closer end of /usr, but I assume that would take a very arduous (and perhaps risky) process of moving all of the data in /usr around. I seem to recall having such a process fail for me on a computer in the past. The other option might be to merge / and /usr since / is underutilized, though I'm not sure if that's a good idea. Do you have any suggestions both on the best reallocation plan and the commands to use to accomplish it? UPDATE: I should add -- here's the partition table. There's one unused partition, which, if memory serves, was the original tmp location before I created a tmp image: Name Flags Part Type FS Type [Label] Size (MB) ------------------------------------------------------------------------------ Unusable 1.05* sda1 Boot Primary Linux ext2 106.96* sda2 Primary Linux ext3 10737.42* sda3 Primary Linux ext3 10737.42* sda5 NC Logical Linux ext3 10738.47* sda6 NC Logical Linux swap / Solaris 2148.54* sda7 NC Logical Linux ext3 1074.80* sda8 NC Logical Linux ext3 964098.53*

    Read the article

  • How should I set up my Hyper-V server and network topology?

    - by Daniel Waechter
    This is my first time setting up either Hyper-V or Windows 2008, so please bear with me. I am setting up a pretty decent server running Windows Server 2008 R2 to be a remote (colocated) Hyper-V host. It will be hosting Linux and Windows VMs, initially for developers to use but eventually also to do some web hosting and other tasks. Currently I have two VMs, one Windows and one Ubuntu Linux, running pretty well, and I plan to clone them for future use. Right now I'm considering the best ways to configure developer and administrator access to the server once it is moved into the colocation facility, and I'm seeking advice on that. My thought is to set up a VPN for access to certain features of the VMs on the server, but I have a few different options for going about this: Connect the server to an existing hardware firewall (an old-ish Netscreen 5-GT) that can create a VPN and map external IPs to the VMs, which will have their own IPs exposed through the virtual interface. One problem with this choice is that I'm the only one trained on the Netscreen, and its interface is a bit baroque, so others may have difficulty maintaining it. Advantage is that I already know how to do it, and I know it will do what I need. Connect the server directly to the network and configure the Windows 2008 firewall to restrict access to the VMs and set up a VPN. I haven't done this before, so it will have a learning curve, but I'm willing to learn if this option is better long-term than the Netscreen. Another advantage is that I won't have to train anyone on the Netscreen interface. Still, I'm not certain if the capabilities of the Windows software firewall as far as creating VPNs, setting up rules for external access to certain ports on the IPs of Hyper-V servers, etc. Will it be sufficient for my needs and easy enough to set up / maintain? Anything else? What are the limitations of my approaches? What are the best practices / what has worked well for you? Remember that I need to set up developer access as well as consumer access to some services. Is a VPN even the right choice?

    Read the article

  • How to move Mailboxes over from old Exchange 2007 to new EBS 2008 network?

    - by Qwerty
    Hi all, This q is similar to: http://serverfault.com/questions/39070/how-to-move-exchange-2003-mailbox-or-store-from-2003-to-2007-on-separate-networks Basically I am trying to move our exchange mailboxes over to a test domain that is hosting EBS2008 with Exchange 2007. We plan to move as soon as we can when we have our exchange data over. I have tried moving a db with mailboxes over but cannot get it to mount in the new Exchange in any way possible, including mounting it onto a recovery store. From my understanding the ONLY prerequisite for moving Exchange DBs across is that it must have the same Organizational name (unlike previous versions of Exchange). If anyone has any insight as to why I cannot mount and simply reattach the mailboxes, please give me an idea as to what could be wrong. It should be as simple as this. Note that the DBs I have are in a clean state. I cannot use ExMerge because I am not running any mailboxes on 2003. I have also tried using a 32bit Vista machine with the Export-Mailbox cmdlet to extract mailboxes but anything I do to it results in Permission errors. I have tried to troubleshoot these with no success. I am running in full admin with proper exchange roles and yet it still gives me access denied errors: Export-Mailbox : MapiExceptionNetworkError: Unable to make admin interface conn ection to server. (hr=0x80040115, ec=-2147221227) Also some errors show in the management console: get-MailboxDatabase Completed Warning: ERROR: Could not connect to the Microsoft Exchange Information Store service on server TATOOINE.baytech.local. One of the following problems may be occurring: 1- The Microsoft Exchange Information Store service is not running. 2- There is no network connectivity to server TATOOINE.baytech.local. 3- You do not have sufficient permissions to perform this command. The following permissions are required to perform this command: Exchange View-Only Administrator and local administrators group for the target server. 4- Credentials have been cached for an unpriviledged user. Try removing the entry for this server from Stored User Names and Passwords. Why I have to use a 32bit machine to export a simple .pst file is beyond me... So yeah I am now out of ideas and any help would be great! Thanks in advance.

    Read the article

  • Ubuntu: Multiple NICs, one used only for Wake-On-LAN

    - by jcwx86
    This is similar to some other questions, but I have a specific need which is not covered in the other questions. I have an Ubuntu server (11.10) with two NICs. One is built into the motherboard and the other is a PCI express card. I want to have my server connected to the internet via my NAT router and also have it able to wake from suspend using a Magic Packet (henceforth referred to as Wake-On-LAN, WOL). I can't do this with just one of the NICs because each has an issue - the built-in NIC will crash the system if it is placed under heavy load (typically downloading data), whilst the PCI express NIC will crash the system if it is used for WOL. I have spent some time investigating these individual problems, to no avail. My plan is thus: use the built-in NIC solely for WOL, and use the PCI express card for all other network communication except WOL. Since I send the WOL Magic Packet to a specific MAC address, there is no danger of hitting the wrong NIC, but there is a danger of using the built-in NIC for general network access, overloading it and crashing the system. Both NICs are wired to the same LAN with address space 192.168.0.0/24. The built-in ethernet card is set to have interface name eth1 and the PCI express card is eth0 in Ubuntu's udev persistent rules (so they stay the same upon reboot). I have been trying to set this up with the /etc/network/interfaces file. Here is where I am currently: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.3 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 auto eth1 iface eth1 inet static address 192.168.0.254 netmask 255.255.255.0 I think by not specifying a gateway for eth1, I prevent it being used for outgoing requests. I don't mind if it can be reached on 192.168.0.254 on the LAN, i.e. via SSH -- it's IP is irrelevant to WOL, which is based on MAC addresses -- I just don't want it to be used to access internet resources. My kernel routing table (from route -n) is Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 My question is this: Is this sufficient for what I want to achieve? My research has thrown up the idea of using static routing to specify that eth1 should only be used for WOL on the local network, but I'm not sure this is necessary. I have been monitoring the activity of the interfaces using iptraf and it seems like eth0 takes the vast majority of the packets, though I am not sure that this will be consistent based on my configuration. Given that if I mess up the configuration, my system will likely crash, it is important to me to have this set up correctly!

    Read the article

  • Real-time offline folder-to-folder backup application needed (Windows)

    - by niktech
    I recently started using Intel Matrix Storage RAID solution that allowed me to use my 5 1TB drives for two RAID volumes. First one a 1TB RAID 0 striped across all 5 drives and second one a RAID 5 across the rest of the free space on all drives (around 2.85TB usable space). The RAID 0 I use for OS, applications and games while the RAID 5 I use as a more-permanent type storage (photos, etc). Now I do realize that running the OS and applications on RAID 0 across 5 drives is very dangerous, which is what brings up the following question. Is there a reliable freeware realtime backup application that can backup a set of folders from one drive to another drive (no online backups needed)? I've already tried a few (Mozy, Yadis, Comodo Backup, GFI Backup, Idoo, Crash Plan) but none meet my requirements: Low CPU and RAM usage. Realtime Backups - as soon as a file is modified in the source folder, it is added to the backup queue which will be processed with the lowest priority when the CPU is idle. This backup queue should persist in cases of computer restarts (ie: the source and destination folders should always have the same set of files, except for the ones waiting in the backup queue). Incremental Backups - if only 10 bytes changed in a 1GB file, the app should only copy those 10 new bytes. Ability to back up locked and opened files (some apps, like Yadis, can't back up critical files like browser favorites). Ability to run as a service (no need for any user to log-in to have the app started). Optional requirements: Compression of the destination into a well-known format (RAR, Zip) that can be directly read without the use of the application. Preset source folders (such as Browser Favorites, Game Saves, Application Settings, etc). The idea is to use RAID 0 array as "semi-persistent RAM-like" storage which in case of a failure can be quickly rebuilt by reinstalling the OS, apps and games and copying over the settings, saves, favorites from the RAID 5. I'm also thinking of taking this RAID 0 as RAM idea to the extreme with SSDs (as soon as we get some nice 6Gb/s SATA III SSDs out there), where a couple of SSDs chained in RAID 0 will work as yet another semi-persistent cache layer sitting between the RAM and the HD. I'm just hoping there already exists an application that satisfies these requirements... otherwise I'll have to write one myself, which I would prefer not to do.

    Read the article

< Previous Page | 339 340 341 342 343 344 345 346 347 348 349 350  | Next Page >