Search Results

Search found 25551 results on 1023 pages for 'linux validated rpm oracl'.

Page 343/1023 | < Previous Page | 339 340 341 342 343 344 345 346 347 348 349 350  | Next Page >

• OpenVPN bad source address from client

  - by Bogdan

  I have one problem with OpenVPN. There are a lot drops records in the openvpn log file on the server: Mon Oct 22 10:14:41 2012 us=726541 laptop/???:1194 MULTI: bad source address from client [192.168.1.107], packet dropped grep -E "^[a-z]" server.conf ----- port 1194 proto udp dev tun ca data/ca.crt cert data/server.crt key data/server.key dh data/dh1024.pem tls-server tls-auth data/ta.key 0 remote-cert-tls client cipher AES-256-CBC tun-mtu 1200 server 10.10.10.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 8.8.8.8" client-to-client client-config-dir /etc/openvpn/ccd route 10.10.10.0 255.255.255.0 keepalive 10 120 comp-lzo persist-key persist-tun max-clients 5 status /var/log/status-openvpn.log log /var/log/openvpn.log verb 4 auth-user-pass-verify /etc/openvpn/verify.sh via-file tmp-dir /tmp script-security 2 ----- cat ccd/laptop ----- iroute 10.10.10.0 255.255.255.0 ----- cat client.conf ----- remote server ip 1194 client dev tun ping 10 comp-lzo proto udp tls-client tls-auth data/ta.key 1 pkcs12 data/vpn.laptop.p12 remote-cert-tls server #ns-cert-type server persist-key persist-tun cipher AES-256-CBC verb 3 pull auth-user-pass /home/user/.openvpn/users.db ----- According to "Jan Just Keijser - OpenVPN 2 Cookbook" root of the problem is incorrect config options.see the screenshot But, as you see, my config has such options. Could you please help me to solve this problem. @week Verb leverl=6; client log. Mon Oct 22 16:06:02 2012 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0 Mon Oct 22 16:06:02 2012 /sbin/ifconfig tun0 10.10.10.3 pointopoint 10.10.10.5 mtu 1500 Mon Oct 22 16:06:02 2012 /sbin/route add -net xxxx netmask 255.255.255.255 gw 192.168.1.1 Mon Oct 22 16:06:02 2012 /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 10.10.10.5 Mon Oct 22 16:06:02 2012 /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 10.10.10.5 Mon Oct 22 16:06:02 2012 Initialization Sequence Completed cat ccd/latop iroute 10.10.10.0 255.255.255.0 ifconfig-push 10.10.10.3 10.10.10.5

  Read the article

• Why isn't "(ulimit -d 1000; firefox) &" working?

  - by MaxB

  I'm trying to limit the memory usage of firefox to prevent it from stalling the whole system with problematic web sites. I tried, in bash: (ulimit -d 1000; firefox) & This should limit the memory usage to 1000kB. Then I opened YouTube, and noticed, in top, that firefox is using 2.6% of the memory, or about 200MB, and not crashing. Clearly the limit is being ignored. Why is that, and how can I enforce it correctly?

  Read the article

• ntpd on Fedora Core 6 with high negative time reset values

  - by Mark White

  The basic problem is we have a FC6 server instance running on a virtual machine, and the system time seems to have been slowly varying until it is now causing a problem. The server runs 24/7 and has been up for 155 days. It has been changed to show GMT, and reports the time as (example) 00:15:15 GMT whereas the actual time is 00:00:00 GMT. This is an offset of 915 seconds. selinux has been changed to 'setenforce 0' for testing and I am running as root. I stop the ntpd service and change the time in System|Administration|Date & Time. The time still shows the same with 'date' in bash. There are no error logs. I change the date with 'date --set' in bash. The response confirms the changed date. I run 'date' and the incorrect date is shown. There are no error logs. I start the ntpd service and /var/log/messages shows success with 'time reset -915.720139s'. The date remains unchanged. ntpq -p shows three three time servers all have offsets of around -915 seconds. I stop ntpd service and try 'ntpd -gqx' and get the same result as above - success, but a large negative time reset. I've tried varying combinations of the above, and a few more settings in System|Administration|Date & Time - no change. I just need to reset the system time to GMT. No offset. But I can't wait for ntpd to slew the time over the next few weeks. Any advice is welcome, cheers! Surely this shouldn't be this difficult... Mark...

  Read the article

• nginx - 403 Forbidden

  - by michell90

  I've trouble to get aliases working correctly on nginx. When i try to access the aliases, /pma and /mba (see secure.example.com.conf), i get a 403 Forbidden but the base url works correctly. I read a lot of posts but nothing helped, so here i am. Nginx and php-fpm are running as www-data:www-data and the permissions for the directories are set to: drwxrwsr-x+ 5 www-data www-data 4.0K Dec 5 22:48 ./ drwxr-xr-x. 3 root root 4.0K Dec 4 22:50 ../ drwxrwsr-x+ 2 www-data www-data 4.0K Dec 5 13:10 mda.example.com/ drwxrwsr-x+ 11 www-data www-data 4.0K Dec 5 10:34 pma.example.com/ drwxrwsr-x+ 3 www-data www-data 4.0K Dec 5 11:49 www.example.com/ lrwxrwxrwx. 1 www-data www-data 18 Dec 5 09:56 secure.example.com -> www.example.com/ Im sorry for the bulk, but i thought better too much than too little. Here are the configuration files: /etc/nginx/nginx.conf user www-data www-data; worker_processes 1; error_log /var/log/nginx/error.log; #error_log /var/log/nginx/error.log notice; #error_log /var/log/nginx/error.log info; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; keepalive_timeout 65; include /etc/nginx/sites-enabled/*; } /etc/nginx/sites-enabled/secure.example.com server { listen 80; server_name secure.example.com; return 301 https://$host$request_uri; } server { listen 443; server_name secure.example.com; access_log /var/log/nginx/secure.example.com.access.log; error_log /var/log/nginx/secure.example.com.error.log; root /srv/http/secure.example.com; include /etc/nginx/ssl/secure.example.com.conf; include /etc/nginx/conf.d/index.conf; include /etc/nginx/conf.d/php-ssl.conf; autoindex off; location /pma/ { alias /srv/http/pma.example.com; } location /mda/ { alias /srv/http/mda.example.com; } } /etc/nginx/ssl/secure.example.com.conf ssl on; ssl_certificate /etc/nginx/ssl/secure.example.com.crt; ssl_certificate_key /etc/nginx/ssl/secure.example.com.key; ssl_protocols SSLv3 TLSv1 TLSv1.1 TLSv1.2; ssl_ciphers HIGH:!aNULL:!MD5; /etc/nginx/conf.d/index.conf index index.php index.html index.htm; /etc/nginx/conf.d/php-ssl.conf location ~ \.php$ { try_files $uri =404; fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock; fastcgi_index index.php; fastcgi_param HTTPS on; fastcgi_param SCRIPT_FILENAME $request_filename; include fastcgi_params; } /var/log/nginx/secure.example.com.error.log 2013/12/05 22:49:04 [error] 29291#0: *2 directory index of "/srv/http/pma.example.com" is forbidden, client: 176.199.78.88, server: secure.example.com, request: "GET /pma/ HTTP/1.1", host: "secure.example.com" EDIT: forgot to mention, i'm running CentOS 6.4 x86_64 and nginx 1.0.15 Thanks in advance!

  Read the article

• Multithread http downloader with webui [closed]

  - by kiler129

  I looking for software similar to JDownloader or PyLoad. JD is pretty good but use heavy Java and for now have very weak web interface. PyLoad is awesome, include simple but powerful web-UI but downloading 10 files (10 threads each, so summary it's 100 connections running at around 8MB/s all) consume a lot of cpu - it's whole core for me. Do you know any lightweight alternatives? Aria2c is good for console but I failed to find any good webui, official one is good but after adding more files almost crashes Chrome :)

  Read the article

• Using gnu screen with dual monitors.

  - by Seamus

  I use GNU screen for all of the work I do in the terminal, and would like to find a way to use it across two screens, but have not found anything that is satisfactory. I use cygwin or putty to access the system that runs screen, most of the time. Thanks in advance.

  Read the article

• Download - Upload is too slow on Centos

  - by Mehdi

  My download/upload in server and out of server is too slow (around 50 KB/s !) ! Did I miss some configuration ? Some information: CentOS release 6.3 uptime load average: 0.17, 0.32, 0.37 Memory free -m total used free shared buffers cached Mem: 24009 21988 2021 0 806 18098 -/+ buffers/cache: 3083 20926 Swap: 4095 28 4067 lshw -C network *-network description: Ethernet interface product: 82574L Gigabit Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 00 serial: 00:25:90:70:17:4a size: 100MB/s capacity: 1GB/s width: 32 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=off broadcast=yes driver=e1000e driverversion=1.9.5-k duplex=full firmware=2.1-2 ip=108.175.8.123 latency=0 link=yes multicast=yes port=twisted pair speed=100MB/s resources: irq:16 memory:fb900000-fb91ffff ioport:e000(size=32) memory:fb920000-fb923fff ethtool ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: off MDI-X: off Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000001 (1) Link detected: yes dmesg |grep e1000e dmesg |grep e1000e e1000e: Intel(R) PRO/1000 Network Driver - 1.9.5-k e1000e: Copyright(c) 1999 - 2012 Intel Corporation. e1000e 0000:02:00.0: Disabling ASPM L0s e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 e1000e 0000:02:00.0: setting latency timer to 64 e1000e 0000:02:00.0: irq 33 for MSI/MSI-X e1000e 0000:02:00.0: irq 34 for MSI/MSI-X e1000e 0000:02:00.0: irq 35 for MSI/MSI-X e1000e 0000:02:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:70:17:4a e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e 0000:02:00.0: eth0: Unsupported Speed/Duplex configuration e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e 0000:02:00.0: Disabling ASPM L1 e1000e 0000:02:00.0: eth0: changing MTU from 1500 to 9000 e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO

  Read the article

• limits.conf to set memory limits

  - by Rupert Jipe

  I would like to limit any process from using more than 500 MB of RAM. AFAIK this is done using RSS in /etc/security/limits.conf but the process called gnome-panel apparently is using 618436 kB of VmRSS. How can this be ? /etc/security/limits.conf * hard rss 512000 username@debian:~$ cat /proc/3002/status Name: gnome-panel State: S (sleeping) Tgid: 3002 Pid: 3002 PPid: 2910 TracerPid: 0 Uid: 1000 1000 1000 1000 Gid: 1000 1000 1000 1000 FDSize: 64 Groups: 20 24 25 29 44 46 112 116 117 1000 1002 1003 VmPeak: 916636 kB VmSize: 916636 kB VmLck: 0 kB VmHWM: 618436 kB VmRSS: 618436 kB VmData: 601972 kB VmStk: 104 kB VmExe: 516 kB VmLib: 29232 kB VmPTE: 1760 kB Threads: 1 SigQ: 0/14001 SigPnd: 0000000000000000 ShdPnd: 0000000000000000 SigBlk: 0000000000000000 SigIgn: 0000000020001000 SigCgt: 0000000180000000 CapInh: 0000000000000000 CapPrm: 0000000000000000 CapEff: 0000000000000000 CapBnd: ffffffffffffffff Cpus_allowed: 3 Cpus_allowed_list: 0-1 Mems_allowed: 00000000,00000001 Mems_allowed_list: 0 voluntary_ctxt_switches: 871965 nonvoluntary_ctxt_switches: 47553 PaX: PeMRs username@debian:~$ cat /proc/3002/limits Limit Soft Limit Hard Limit Units Max cpu time unlimited unlimited seconds Max file size unlimited unlimited bytes Max data size unlimited unlimited bytes Max stack size 8388608 unlimited bytes Max core file size 0 0 bytes Max resident set 524288000 524288000 bytes Max processes 100 100 processes Max open files 1024 1024 files Max locked memory 65536 65536 bytes Max address space unlimited unlimited bytes Max file locks unlimited unlimited locks Max pending signals 14001 14001 signals Max msgqueue size 819200 819200 bytes Max nice priority 0 0 Max realtime priority 0 0 Max realtime timeout unlimited unlimited us

  Read the article

• How to keep variable preserve while running script through ssh

  - by Ali Raza

  I am trying to run while loop with read through ssh: #!/bin/bash ssh [email protected] "cat /var/log/syncer/rm_filesystem.log | while read path; do stat -c \"%Y %n\" "$path" >> /tmp/fs_10.10.10.10.log done" But the issue is my variable $path is resolving on my localhost where as I want to resolve it on remote host so that it can read file on remote host and take stat of all folder/files listed in "rm_filesystem.log"

  Read the article

• Virtual machines interconnection inside Proxmox 2.1 Cluster

  - by Anton

  We have 3 physical servers (each with 1 NIC) in different datacentres, all of them are interconnected by openvpn bridged private network (10.x.x.x). Inside this network we have fully functional 3 nodes Proxmox 2.1 cluster. So, actually question is: Is there any "proper" way to make "global" local network (172.16.x.x) for all VMs inside cluster, so even if we move VM from one node to other we could reach it by static IP regardless of it's physical location? BTW, we can't add dedicated NIC to each server. Thanks in advance. EDIT: I have tried to make a separate openvpn bridge for 172.16.x.x, now I have at each server two interfaces: SRV1: openvpnbr1 - 172.16.13.1 vmbr0 - 172.16.1.1 SRV2: openvpnbr1 - 172.16.13.2 vmbr0 - 172.16.2.1 But now there is no connection between those ifaces: SRV1: ping 172.16.13.2 From 172.16.1.1 icmp_seq=2 Destination Host Unreachable SRV2: ping 172.16.13.1 From 172.16.2.1 icmp_seq=2 Destination Host Unreachable If I shut down vmbr0 interfaces, so there is connection between servers over openvpn, but vmbr0 is used by Proxmox... Where I am wrong?

  Read the article

• Configuring Apache for multiple clients

  - by Chris_K

  Last week I had a question here about suexec / suphp but I tried to accomplish too much. I'm going to narrow the scope a bit and try again. I'd like to configure a LAMP server to host multiple clients. I'd like it to seem (from the client's viewpoint) just like any other shared hosting environment. Web sites in their home directory, no need to muck around with file ownerships to get pages served, etc. It would seem that a configuration that involves suexec and suphp is the way to go(?) I'm specifically looking for a current/modern guide on how to accomplish this (I'll be using CentOS if it matters) and I'm afraid I need more than a link to Apache docs. Are there any good How-To's out there? The few I've found have been pretty out of date, but it is quite possible my search was weak.

  Read the article

• Building a Social Networking website, should I have separate servers for certain parts of the site? [closed]

  - by Dylan Cross

  I have been working on building a social networking website, I'm pretty committed to this and I think I have something that could work out. I hope to be launching it January 1st, and so I have a question for server setup and such. Facebook has separate domain names/servers for their photos (and I don't know what else), so I would assume that by doing this it would help spread the server loads out. So I am wondering if it would make a very big difference in speed if I had my main server for basically everything, but had another server and such that the photos would be stored on and access them the same way that facebook does.

  Read the article

• What useful things can one add to one's .bashrc ?

  - by gyaresu

  Is there anything that you can't live without and will make my life SO much easier? Here are some that I use ('diskspace' & 'folders' are particularly handy). # some more ls aliases alias ll='ls -alh' alias la='ls -A' alias l='ls -CFlh' alias woo='fortune' alias lsd="ls -alF | grep /$" # This is GOLD for finding out what is taking so much space on your drives! alias diskspace="du -S | sort -n -r |more" # Command line mplayer movie watching for the win. alias mp="mplayer -fs" # Show me the size (sorted) of only the folders in this directory alias folders="find . -maxdepth 1 -type d -print | xargs du -sk | sort -rn" # This will keep you sane when you're about to smash the keyboard again. alias frak="fortune" # This is where you put your hand rolled scripts (remember to chmod them) PATH="$HOME/bin:$PATH"

  Read the article

• Porting GNOME keyboard shortcuts to URXVT

  - by fpga_boffin

  I recently switched from gnome terminal to urxvt (and installed tabbed extensions). I am also a heavy emacs user which uses a lot of key combinations similar to urxvt (tab related stuff) like Shift-Left and Shift-Right. These key-combinations are set for selecting text in emacs. Is there a way to map ALT-1, ALT-2, ALT-3 for tabs 1, 2, 3 ..? Is there an extension to do that ? Can it be achieved through the ~/.Xdefaults file ?

  Read the article

• Mod_security questions and on User-Agent types

  - by Tiffany Walker

  Very new to mod_sec I want to block a UA string and I noticed there are a few types: SecRule HTTP_User-Agent SecRule REQUEST_HEADERS:User-Agent What is the real difference between them? My block: SecRule REQUEST_HEADERS:User-Agent "perl" "phase:2,pass,msg:'Perl based user agent identified'" Do I need to set a SecDefaultAction phase:2,deny,status:403,log,auditlog before that? Then any SecRule below that follows that action right?

  Read the article

• Rip authedicatation from LDAP to Local

  - by oxinabox

  We are taking a small portion of out network offline, and running a separate network using that portion. (By small portion I mean 2 servers, that will be connected to 30 odd boxs that aren't usually part of our network, and don't need to authenicate) I intend to create a VM on one of the servers to provide general user services, and IRC server, remote shell etc. And I would like the users to be able to use there usual server log in details. Problem is the LDAP server that normally checks those details is not one of the severs. So I need to be able to some how take their details off LDAP and put them on the the server that is coming. One suggestion I had was to set a LDAP server on the VM locally, and clone the LDAP database onto it (using something called slapcat) is this the best way? Or can I I change the LDAP data into local authentication data?

  Read the article

• file-name encoding problems

  - by tenhouse

  I googled over this topic but couldn't find what I was looking for... the following "happend" to me: I had my files stored on a NTFS-USB Harddisk, because of space problems I moved them to an ext3 system....somehow the filename (content is still ok as far as I saw) encoding screwed up....my files look like the following now: Kküken <--- should have an "ü" Jäger <--- should be an "ä" Zwölf <--- should be an "ö" fünfte <-- should be an "ü" etc .... These are just examples, but already give me my first question Why has the "ü" two different representations? (Maybe I screw up, before I screw up and now I have a mixing of x different encoding-layers? :) ) I tried the following command: convmv -r -f UTF-8 -t ISO-8859-1 * This command work for some files (for example Zwölf) but not for all: iso-8859-1 doesn't cover all needed characters for: "fünfte" So Iguess it must be another encoding - but which? How can I find out this? And is there any way that I can still fix all of this?

  Read the article

• I've set an editor as default, how do I call it to open files in a shell?

  - by iight

  EDIT I thought of a better way to phrase the question. How can I find the alias that Ubuntu is using for a different text editor? Rather than using nano by typing nano file.txt, i'd like to be able to type sublime file.txt to open sublime editor. I don't know where to look to find these aliases. sudo update-alternatives --config editor does not show it as a choice, I only see the 'default' editors, like Nano and vim.tiny.

  Read the article

• What are useful .screenrc settings?

  - by gyaresu

  Basically like some of my own that I've posted below. I'm looking for added functionality to the programme 'screen'. At the very least have a look at the last line for a fantastic 'menu bar' at the bottom of a screen session. ## gyaresu's .screenrc 2008-03-25 # http://delicious.com/search?p=screenrc # Don't display the copyright page startup_message off # tab-completion flash in heading bar vbell off # keep scrollback n lines defscrollback 1000 # Doesn't fix scrollback problem on xterm because if you scroll back # all you see is the other terminals history. # termcapinfo xterm|xterms|xs|rxvt ti@:te@ # These will let you use bind -c selectHighs 0 select 10 #these three commands are bind -c selectHighs 1 select 11 #added to the command-class bind -c selectHighs 2 select 12 #selectHighs bind -c selectHighs 3 select 13 bind -c selectHighs 4 select 14 bind -c selectHighs 5 select 15 bind - command -c selectHighs #bind the hyphen to #command-class selectHighs screen -t rtorrent 0 rtorrent #screen -t tunes 1 ncmpc --host=192.168.1.4 --port=6600 #was for connecting to MPD music server. screen -t stuff 1 screen -t irssi 2 irssi screen -t dancing 4 screen -t python 5 python screen -t giantfriend 6 these_are_ssh_to_server_scripts.sh screen -t computerrescue 7 these_are_ssh_to_server_scripts.sh screen -t BMon 8 bmon -p eth0 screen -t htop 9 htop screen -t hellanzb 10 hellanzb screen -t watching 3 #screen -t interactive.fiction 8 #screen -t hellahella 8 paster serve --daemon /home/gyaresu/downloads/hellahella/hella.ini shelltitle "$ |bash" # THIS IS THE PRETTY BIT #change the hardstatus settings to give an window list at the bottom of the ##screen, with the time and date and with the current window highlighted hardstatus alwayslastline #hardstatus string '%{= mK}%-Lw%{= KW}%50>%n%f* %t%{= mK}%+Lw%< %{= kG}%-=%D %d %M %Y %c:%s%{-}' hardstatus string '%{= kG}[ %{G}%H %{g}][%= %{= kw}%?%-Lw%?%{r}(%{W}%n*%f%t%?(%u)%?%{r})%{w}%?%+Lw%?%?%= %{g}][%{B} %d/%m %{W}%c %{g}]'

  Read the article

• How to limit ram usage of a certain binary?

  - by marc.riera

  Hello, i have a binary, which indexes some stuff, it eats all my ram and my swap. Then the server hangs. I would like to limit its ram usage. I've looking at cpulimit and /etc/security/limits.conf but both of them focus on cpu limits and user/processes . Have somebody limited the usage of a certain binary? How can I approach this issue? Thanks

  Read the article

• mdadm raid5 recover double disk failure - with a twist (drive order)

  - by Peter Bos

  Let me acknowledge first off that I have made mistakes, and that I have a backup for most but not all of the data on this RAID. I still have hope of recovering the rest of the data. I don't have the kind of money to take the drives to a recovery expert company. Mistake #0, not having a 100% backup. I know. I have a mdadm RAID5 system of 4x3TB. Drives /dev/sd[b-e], all with one partition /dev/sd[b-e]1. I'm aware that RAID5 on very large drives is risky, yet I did it anyway. Recent events The RAID become degraded after a two drive failure. One drive [/dev/sdc] is really gone, the other [/dev/sde] came back up after a power cycle, but was not automatically re-added to the RAID. So I was left with a 4 device RAID with only 2 active drives [/dev/sdb and /dev/sdd]. Mistake #1, not using dd copies of the drives for restoring the RAID. I did not have the drives or the time. Mistake #2, not making a backup of the superblock and mdadm -E of the remaining drives. Recovery attempt I reassembled the RAID in degraded mode with mdadm --assemble --force /dev/md0, using /dev/sd[bde]1. I could then access my data. I replaced /dev/sdc with a spare; empty; identical drive. I removed the old /dev/sdc1 from the RAID mdadm --fail /dev/md0 /dev/sdc1 Mistake #3, not doing this before replacing the drive I then partitioned the new /dev/sdc and added it to the RAID. mdadm --add /dev/md0 /dev/sdc1 It then began to restore the RAID. ETA 300 mins. I followed the process via /proc/mdstat to 2% and then went to do other stuff. Checking the result Several hours (but less then 300 mins) later, I checked the process. It had stopped due to a read error on /dev/sde1. Here is where the trouble really starts I then removed /dev/sde1 from the RAID and re-added it. I can't remember why I did this; it was late. mdadm --manage /dev/md0 --remove /dev/sde1 mdadm --manage /dev/md0 --add /dev/sde1 However, /dev/sde1 was now marked as spare. So I decided to recreate the whole array using --assume-clean using what I thought was the right order, and with /dev/sdc1 missing. mdadm --create /dev/md0 --assume-clean -l5 -n4 /dev/sdb1 missing /dev/sdd1 /dev/sde1 That worked, but the filesystem was not recognized while trying to mount. (It should have been EXT4). Device order I then checked a recent backup I had of /proc/mdstat, and I found the drive order. md0 : active raid5 sdb1[0] sde1[4] sdd1[2] sdc1[1] 8790402048 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/4] [UUUU] I then remembered this RAID had suffered a drive loss about a year ago, and recovered from it by replacing the faulty drive with a spare one. That may have scrambled the device order a bit...so there was no drive [3] but only [0],[1],[2], and [4]. I tried to find the drive order with the Permute_array script: https://raid.wiki.kernel.org/index.php/Permute_array.pl but that did not find the right order. Questions I now have two main questions: I screwed up all the superblocks on the drives, but only gave: mdadm --create --assume-clean commands (so I should not have overwritten the data itself on /dev/sd[bde]1. Am I right that in theory the RAID can be restored [assuming for a moment that /dev/sde1 is ok] if I just find the right device order? Is it important that /dev/sde1 be given the device number [4] in the RAID? When I create it with mdadm --create /dev/md0 --assume-clean -l5 -n4 \ /dev/sdb1 missing /dev/sdd1 /dev/sde1 it is assigned the number [3]. I wonder if that is relevant to the calculation of the parity blocks. If it turns out to be important, how can I recreate the array with /dev/sdb1[0] missing[1] /dev/sdd1[2] /dev/sde1[4]? If I could get that to work I could start it in degraded mode and add the new drive /dev/sdc1 and let it resync again. It's OK if you would like to point out to me that this may not have been the best course of action, but you'll find that I realized this. It would be great if anyone has any suggestions.

  Read the article

• Outlook 2003 under RHEL 5 server

  - by Kumar P

  I am using RHEL 5 server as proxy server in Local network. Under server i have few windows machines. Now i want to configure Outlook 2003 for send and receive mails in windows boxes, When i configure and test connections, It showing connection failed. In browser, internet working well. Without proxy, windows outlook - 2003 configure well in windows boxes also working well. What you think about it and How can i solve this problem ? Please give clear steps to solve.

  Read the article

• What are my options with a downloaded Rackspace cloud image?

  - by schnippy

  I've got an unresponsive Rackspace slice that has defied all attempts at accessing. I created an emergency image from this and deleted it, downloading the files that compromise the image to a local source. There are a number of files / assets I would still like to recover from this server if possible but not sure exactly what I can do with the image files, if anything. Here's the files I have, for what its worth: emergency_########_######_cloudserver########.tar.gz.0 (5gb) emergency_########_######_cloudserver########.tar.gz.1 (5gb) emergency_########_######_cloudserver########.tar.gz.2 (5gb) emergency_########_######_cloudserver########.tar.gz.3 (50mb) emergency_########_######_cloudserver########.yml (25kb) Is it possible to mount this image as a drive? Are there other forensic recovery options?

  Read the article

• Listing lines from just one file in DIFF

  - by justintime

  I would like to get (GNU)DIFF to printout only lines that are different in one file. So given ==> diffa.txt <== line1 line2 - in a only line3 line4 changed line5 ==> diffb.txt <== line1 line3 line4 changed in b line5 line6 in b only i would like diff --someoption diffa.txt diffb.txt to produce line2 - in a only line4 changed The following looks as though it should be helpful but it is a bit cryptic : --GTYPE-group-format=GFMT Similar, but format GTYPE input groups with GFMT. --line-format=LFMT Similar, but format all input lines with LFMT. --LTYPE-line-format=LFMT Similar, but format LTYPE input lines with LFMT. LTYPE is `old', `new', or `unchanged'. GTYPE is LTYPE or `changed'. GFMT may contain: %< lines from FILE1 %> lines from FILE2

  Read the article

• Bootable GRUB partition

  - by MA1

  I have a customized live fedora 12 USB which is working fine. What i want to do is to make a partition of my hard disk bootable so that my customized fedora can be run from hard disk. To accomplish this i did the following steps: Created a primary partition(/dev/sda2) and format it as ext3 and set it as active. Copy all the files in the live usb to /dev/sda2. Following are the live usb contents(all directories): a. boot b. EFI c. LiveOS d. syslinux Then i installed the GRUB in boot/grub Created the grub.conf in boot/grub Following are the contents of each directory in the USB: syslinux/ boot.cat isolinux.bin splash.jpg vesamenu.c32 initrd0.img ldlinux.sys syslinux.cfg vmlinuz0 LiveOS/ livecd-iso-to-disk osmin.img squashfs.img EFI/ boot/ boot.conf grub.conf boot.efi bootia32.conf bootia32.efi splash.jpg splash.xpm.gz vesamenu.c32 initrd0.img isolinux.bin isolinux.cfg vmlinuz0 boot/grub/ core GRUB files grub.conf olpc.fth Following are contents of grub.conf default=0 splashimage=/EFI/boot/splash.xpm.gz timeout 2 hiddenmenu title funLinux kernel /EFI/boot/vmlinuz0 root=live:LABEL=myFun rootfstype=auto ro liveimg quiet ssb.blacklist=1 selinux=0 vga=normal nomodeset rhgb initrd /EFI/boot/initrd0.img Now when i try to boot from the hard disk it shows the grub menu and fedora starting to load but during loading it said No root device found Boot has failed, sleeping forever So, where is the problem? what i am doing wrong?

  Read the article

< Previous Page | 339 340 341 342 343 344 345 346 347 348 349 350  | Next Page >