Search Results

Search found 9214 results on 369 pages for 'earth engine'.

Page 344/369 | < Previous Page | 340 341 342 343 344 345 346 347 348 349 350 351  | Next Page >

• Workflow versioning

  - by Nitra

  I believe I have a fundamental misunderstanding when it comes to workflow engines which I would appreciate if you could help me sort out. I'm not sure if my misunderstanding is specific to the workflow engine I'm using, or if it's a general misunderstanding. I happen to use Windows Workflow Foundation (WWF). TLDR-version WWF allows you to implement business processes in long-running workflows (think months or even years). When started, the workflows can't be changed. But what business process can't change at any time? And if a business process changes, wouldn't you want your software to reflect this change for already started 'instances' of the business process? What am I missing? Background In WWF you define a workflow by combining a set of activites. There are different types of activities - some of them are for flow control, such as the IfElseActivity and the WhileActivty while others allows you to perform actual tasks, such as the CodeActivity wich allows you to run .NET code and the InvokeWebServiceActivity which allows you to call web services. The activites are combined to a workflow using a visual designer. You pretty much drag-and-drop activities from a toolbox to a designer area and connect the activites to each other. The workflow and activities have input paramters, output parameters and variables. We have a single workflow which sometimes runs in a matter of a few days, but it may run for 5-6 months. WWF takes care of persisting the workflow state (what activity are we currently executing, what are the variable values and so on). So far I think WWF makes sense. Some people will prefer to implement a software representation of a business process using a visual designer over writing all of it in code. So what's the issue then? What I don't really get is the following: WWF is designed to take care of long-running workflows. But at the same time, WWF has no built-in functionality which allows you to modify the running workflows. So if you model a business process using a workflow and run that for 6 months, you better hope that the business process does not change. Because if it do, you'll have to have multiple versions of the workflow executing at the same time. This seems like a fundamental design mistake to me, but at the same time it seems more likely that I've misunderstood something. For us, this has had some real-world effects: We release new versions every month, but some workflows may run for a year. This means that we have several versions of the workflow running in parallell, in other words several versions of the business logics. This is the same as having many differnt versions of your code running in production in the same system at the same time, which becomes a bit hard to understand for users. (depending on on whether they clicked a 'Start' button 9 or 10 months ago, the software will behave differently) Our workflow refers to different types of entities and since WWF now has persisted and serialized these we can't really refactor the entities since then existing workflows can't be resumed (deserialization will fail We've received some suggestions on how to handle this When we create a new version of the workflow, cancel all running workflows and create new ones. But in our workflows there's a lot of manual work involved and if we start from scratch a lot of people has to re-do their work. Track what has been done in the workflow and when you create a new one skip activites which have already been executed. I feel that this alternative may work for simple workflows, but it becomes hairy to automatically figure out what activities to skip if there's major refactoring done to a workflow. When we create a new version of the workflow, upgrade old versions using the new WWF 4.5 functionality for upgrading workflows. But then we would have to skip using the visual designer and write code to inject activities in the right places in the workflow. According to MSDN, this upgrade functionality is only intended for minor bug fixes and not larger changes. What am I missing?

  Read the article

• Open source adventures with... wait for it... Microsoft

  - by Jeff

  Last week, Microsoft announced that it was going to open source the rest of the ASP.NET MVC Web stack. The core MVC framework has been open source for a long time now, but the other pieces around it are also now out in the wild. Not only that, but it's not what I call "big bang" open source, where you release the source with each version. No, they're actually committing in real time to a public repository. They're also taking contributions where it makes sense. If that weren't exciting enough, CodePlex, which used to be a part of the team I was on, has been re-org'd to a different part of the company where it is getting the love and attention (and apparently money) that it deserves. For a period of several months, I lobbied to get a PM gig with that product, but got nowhere. A year and a half later, I'm happy to see it finally treated right. In any case, I found a bug in Razor, the rendering engine, before the beta came out. I informally sent the bug info to some people, but it wasn't fixed for the beta. Now, with the project being developed in the open, I was able to submit the issue, and went back and forth with the developer who wrote the code (I met him once at a meet up in Bellevue, I think), and he committed a fix. I tried it a day later, and the bug was gone. There's a lot to learn from all of this. That open source software is surprisingly efficient and often of high quality is one part of it. For me the win is that it demonstrates how open and collaborative processes, as light as possible, lead to better software. In other words, even if this were a project being developed internally, at a bank or something, getting stakeholders involved early and giving people the ability to respond leads to awesomeness. While there is always a place for big thinking, experience has shown time and time again that trying to figure everything out up front takes too long, and rarely meets expectations. This is a lesson that probably half of Microsoft has yet to learn, including the team I was on before I split. It's the reason that team still hasn't shipped anything to general availability. But I've seen what an open and iterative development style can do for teams, at Microsoft and other places that I've worked. When you can have a conversation with people, and take ideas and turn them into code quickly, you're winning. So why don't people like winning? I think there are a lot of reasons, and they can generally be categorized into fear, skepticism and bad experiences. I can't give the Web stack teams enough credit. Not only did they dream big, but they changed a culture that often seems immovable and hopelessly stuck. This is a very public example of this culture change, but it's starting to happen at every scale in Microsoft. It's really interesting to see in a company that has been written off as dead the last decade.

  Read the article

• Platform jumping problems with AABB collisions

  - by Vee

  See the diagram first: When my AABB physics engine resolves an intersection, it does so by finding the axis where the penetration is smaller, then "push out" the entity on that axis. Considering the "jumping moving left" example: If velocityX is bigger than velocityY, AABB pushes the entity out on the Y axis, effectively stopping the jump (result: the player stops in mid-air). If velocityX is smaller than velocitY (not shown in diagram), the program works as intended, because AABB pushes the entity out on the X axis. How can I solve this problem? Source code: public void Update() { Position += Velocity; Velocity += World.Gravity; List<SSSPBody> toCheck = World.SpatialHash.GetNearbyItems(this); for (int i = 0; i < toCheck.Count; i++) { SSSPBody body = toCheck[i]; body.Test.Color = Color.White; if (body != this && body.Static) { float left = (body.CornerMin.X - CornerMax.X); float right = (body.CornerMax.X - CornerMin.X); float top = (body.CornerMin.Y - CornerMax.Y); float bottom = (body.CornerMax.Y - CornerMin.Y); if (SSSPUtils.AABBIsOverlapping(this, body)) { body.Test.Color = Color.Yellow; Vector2 overlapVector = SSSPUtils.AABBGetOverlapVector(left, right, top, bottom); Position += overlapVector; } if (SSSPUtils.AABBIsCollidingTop(this, body)) { if ((Position.X >= body.CornerMin.X && Position.X <= body.CornerMax.X) && (Position.Y + Height/2f == body.Position.Y - body.Height/2f)) { body.Test.Color = Color.Red; Velocity = new Vector2(Velocity.X, 0); } } } } } public static bool AABBIsOverlapping(SSSPBody mBody1, SSSPBody mBody2) { if(mBody1.CornerMax.X <= mBody2.CornerMin.X || mBody1.CornerMin.X >= mBody2.CornerMax.X) return false; if (mBody1.CornerMax.Y <= mBody2.CornerMin.Y || mBody1.CornerMin.Y >= mBody2.CornerMax.Y) return false; return true; } public static bool AABBIsColliding(SSSPBody mBody1, SSSPBody mBody2) { if (mBody1.CornerMax.X < mBody2.CornerMin.X || mBody1.CornerMin.X > mBody2.CornerMax.X) return false; if (mBody1.CornerMax.Y < mBody2.CornerMin.Y || mBody1.CornerMin.Y > mBody2.CornerMax.Y) return false; return true; } public static bool AABBIsCollidingTop(SSSPBody mBody1, SSSPBody mBody2) { if (mBody1.CornerMax.X < mBody2.CornerMin.X || mBody1.CornerMin.X > mBody2.CornerMax.X) return false; if (mBody1.CornerMax.Y < mBody2.CornerMin.Y || mBody1.CornerMin.Y > mBody2.CornerMax.Y) return false; if(mBody1.CornerMax.Y == mBody2.CornerMin.Y) return true; return false; } public static Vector2 AABBGetOverlapVector(float mLeft, float mRight, float mTop, float mBottom) { Vector2 result = new Vector2(0, 0); if ((mLeft > 0 || mRight < 0) || (mTop > 0 || mBottom < 0)) return result; if (Math.Abs(mLeft) < mRight) result.X = mLeft; else result.X = mRight; if (Math.Abs(mTop) < mBottom) result.Y = mTop; else result.Y = mBottom; if (Math.Abs(result.X) < Math.Abs(result.Y)) result.Y = 0; else result.X = 0; return result; }

  Read the article

• Don't Forget To Enjoy Life

  - by Justin

  I have a pretty clear stance on posting personal information in my blogs. I tend to avoid it almost instinctively. Part of that is because I am a somewhat private person. And the other is because I know how easy it is for personal information to be gathered and collected from sources such as blogs. So, this has remained a tech only blog for me. I've only posted topics mostly related to issues I have encountered at work. In a way this blog is a 'bookmark' for me. If I post something here and run into the issue again it allows me to refer back to a convenient place where the 'fix' is documented in a way that I understand. But today, I am posting something that speaks to everyone. Something PERSONAL. Honestly, I expect this entry to receive zero views. But if nothing else, I can come back to this blog one day when I'm having a bad day or something and run across this post. And I will be reminded... DON'T FORGET TO ENJOY LIFE. Say this to yourself out loud, right now. People, we can get caught up in some rather mundane details as we trek through life. It's so easy to lose track of what really matters that it should be no surprise to find yourself reading something like this and thinking to yourself 'Yeah. You are right, man. Some of this crap I'm clinging on to right now is so small in the grand scheme of things'. I have no reservation, no shame, in saying that I am more often than not caught up in the ever evolving world of 'shit that does not matter'. When you work in technology, you are surrounded by deadlines, upgrades, new versions, support 'end of life', etc. And by time you get done with your 8 hours you go home and put in a few more because you are STILL CAUGHT UP in the things you dealt with at work all day. DO YOURSELF A FAVOR. DO YOUR FAMILY AND FRIEND A FAVOR. When you are done for the day, and you drive home, get those work-related things out of your head before you pull into the driveway. If you are still thinking on them when you park the car, leave the engine running, close your eyes and take a deep breath. If you believe in God, pray. If you don't then meditate for a second with the INTENTION of letting go of the day and becoming the 'real you'. You may have forgotten who the real you is so I'll remind you.... THE REAL YOU IS THAT GUY OR GAL THAT LAUGHS, LOVES, AND LIVES. Be the real you as often as possible. If you can't do it during your 9 - 5, do it at home. YOUR RELATIONSHIPS AND YOUR PERSONAL HAPPINESS DEPEND ON IT. I am going to make you a promise right now. If you do what I've just said, your days will be longer and your joy will be exponential. I can't explain why I know this to be true. But I do know it. And if you are there reading this right now, you know it is true too. We both know it is true because it COMES FROM WITHIN EVERY MAN, WOMAN and CHILD. We are born into love and happiness. Lets not fade away into the darkness so easily found in this world. Lets keep the flame burning. The flame of passion. Passion for LIFE. Peace be with you.

  Read the article

• SQL SERVER – Last Two Days to Get FREE Book – Joes 2 Pros Certification 70-433

  - by pinaldave

  Earlier this week we announced that we will be giving away FREE SQL Wait Stats book to everybody who will get SQL Server Joes 2 Pros Combo Kit. We had a fantastic response to the contest. We got an overwhelming response to the offer. We knew there would be a great response but we want to honestly say thank you to all of you for making it happen. Rick and I want to make sure that we express our special thanks to all of you who are reading our books. The offer is still on and there are two more days to avail this offer. We want to make sure that everybody who buys our most selling combo kits, we will send our other most popular SQL Wait Stats book. Please read all the details of the offer here. The books are great resources for anyone who wants to learn SQL Server from fundamentals and eventually go on the certification path of 70-433. Exam 70-433 contains following important subject and the book covers the subject of fundamental. If you are taking the exam or not taking the exam – this book is for every SQL Developer to learn the subject from fundamentals.  Create and alter tables. Create and alter views. Create and alter indexes. Create and modify constraints. Implement data types. Implement partitioning solutions. Create and alter stored procedures. Create and alter user-defined functions (UDFs). Create and alter DML triggers. Create and alter DDL triggers. Create and deploy CLR-based objects. Implement error handling. Manage transactions. Query data by using SELECT statements. Modify data by using INSERT, UPDATE, and DELETE statements. Return data by using the OUTPUT clause. Modify data by using MERGE statements. Implement aggregate queries. Combine datasets. INTERSECT, EXCEPT Implement subqueries. Implement CTE (common table expression) queries. Apply ranking functions. Control execution plans. Manage international considerations. Integrate Database Mail. Implement full-text search. Implement scripts by using Windows PowerShell and SQL Server Management Objects (SMOs). Implement Service Broker solutions. Track data changes. Data capture Retrieve relational data as XML. Transform XML data into relational data. Manage XML data. Capture execution plans. Collect output from the Database Engine Tuning Advisor. Collect information from system metadata. Availability of Book USA - Amazon | India - Flipkart | Indiaplaza Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Joes 2 Pros, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Problems with 3D Array for Voxel Data

  - by Sean M.

  I'm trying to implement a voxel engine in C++ using OpenGL, and I've been working on the rendering of the world. In order to render, I have a 3D array of uint16's that hold that id of the block at the point. I also have a 3D array of uint8's that I am using to store the visibility data for that point, where each bit represents if a face is visible. I have it so the blocks render and all of the proper faces are hidden if needed, but all of the blocks are offset by a power of 2 from where they are stored in the array. So the block at [0][0][0] is rendered at (0, 0, 0), and the block at 11 is rendered at (1, 1, 1), but the block at [2][2][2] is rendered at (4, 4, 4) and the block at [3][3][3] is rendered at (8, 8, 8), and so on and so forth. This is the result of drawing the above situation: I'm still a little new to the more advanced concepts of C++, like triple pointers, which I'm using for the 3D array, so I think the error is somewhere in there. This is the code for creating the arrays: uint16*** _blockData; //Contains a 3D array of uint16s that are the ids of the blocks in the region uint8*** _visibilityData; //Contains a 3D array of bytes that hold the visibility data for the faces //Allocate memory for the world data _blockData = new uint16**[REGION_DIM]; for (int i = 0; i < REGION_DIM; i++) { _blockData[i] = new uint16*[REGION_DIM]; for (int j = 0; j < REGION_DIM; j++) _blockData[i][j] = new uint16[REGION_DIM]; } //Allocate memory for the visibility _visibilityData = new uint8**[REGION_DIM]; for (int i = 0; i < REGION_DIM; i++) { _visibilityData[i] = new uint8*[REGION_DIM]; for (int j = 0; j < REGION_DIM; j++) _visibilityData[i][j] = new uint8[REGION_DIM]; } Here is the code used to create the block mesh for the region: //Check if the positive x face is visible, this happens for every face //Block::VERT_X_POS is just an array of non-transformed cube verts for one face //These checks are in a triple loop, which goes over every place in the array if (_visibilityData[x][y][z] & 0x01 > 0) { _vertexData->AddData(&(translateVertices(Block::VERT_X_POS, x, y, z)[0]), sizeof(Block::VERT_X_POS)); } //This is a seperate method, not in the loop glm::vec3* translateVertices(const glm::vec3 data[], uint16 x, uint16 y, uint16 z) { glm::vec3* copy = new glm::vec3[6]; memcpy(&copy, &data, sizeof(data)); for(int i = 0; i < 6; i++) copy[i] += glm::vec3(x, -y, z); //Make +y go down instead return copy; } I cannot see where the blocks may be getting offset by more than they should be, and certainly not why the offsets are a power of 2. Any help is greatly appreciated. Thanks.

  Read the article

• Join us on our Journey to be #1 in SaaS!

  - by jessica.ebbelaar(at)oracle.com

  WHY ORACLE? Oracle is a robust organization that has proven to maintain growth and innovation at all levels with a constant evolving attitude. The main ingredient of Oracles success is the 105.000 talented employees who constantly amaze each other in building a better and more innovative organization. Oracle is a company where YOU can make a difference. What is OD? Oracle Direct is a state-of-the-art, multi-channel EMEA sales operation bringing to life the benefits of Oracle’s complete technology stack. It offers you the unique opportunity to work with the most talented and like-minded sales professionals in the industry.  You will have access to world class training and structured career development programmes allowing you to accelerate your Solution Sales career across a multitude of product lines and a choice of attractive locations. What positions are OD Hiring?   Oracle is on a journey to be the #1 SaaS vendor in EMEA.  Due to recent expansion and acquisitions within our Cloud Business, we are now growing our EMEA Cloud Applications Sales Group in Dublin. We have many exciting NEW opportunities across our CRM and HCM SaaS Sales teams. As a SaaS Sales Account Manager, you will proactively manage an assigned territory / vertical with responsibility for the full sales cycle. This role requires strong business development, solution selling, account management and closing skills. WHY ORACLE? Oracle is a robust organization that has proven to maintain growth and innovation at all levels with a constant evolving attitude. The main ingredient of Oracles success is the 105.000 talented employees who constantly amaze each other in building a better and more innovative organization. Oracle is a company where YOU can make a difference. What is OD? Oracle Direct is a state-of-the-art, multi-channel EMEA sales operation bringing to life the benefits of Oracle’s complete technology stack. It offers you the unique opportunity to work with the most talented and like-minded sales professionals in the industry.  You will have access to world class training and structured career development programmes allowing you to accelerate your Solution Sales career across a multitude of product lines and a choice of attractive locations. What positions are OD Hiring? Oracle is on a journey to be the #1 SaaS vendor in EMEA.  Due to recent expansion and acquisitions within our Cloud Business, we are now growing our EMEA Cloud Applications Sales Group in Dublin. We have many exciting NEW opportunities across our CRM and HCM SaaS Sales teams. As a SaaS Sales Account Manager, you will proactively manage an assigned territory / vertical with responsibility for the full sales cycle. This role requires strong business development, solution selling, account management and closing skills. What is the Business Development Group (BDG) The Business Development Group is the key entry point in Oracle for the future Sales and Management talent of the organisation. We are the Demand Generation engine for Oracle in EMEA. We provide revenue generating, quality sales pipeline to our Inside and Field Sales professionals as well as to our Channel Partners. Our current focus is to provide an agile and flexible service offering to our customers and stakeholders to meet ever changing business needs, whilst constantly striving to improve the customer experience, quality of our pipeline, market coverage and penetration. As a SaaS Business Development Consultant (BDC) you will be the first touch point with new customers. Your goal is to proactively identify and qualify business opportunities leading to revenue for Oracle. You will work closely with your Inside Sales colleagues who will progress your qualified pipeline and opportunities. Work for us Work for the only multi-pillar SaaS vendor in the market Be part of a FUN, fast paced and truly International sales team  Develop you solution sales EXPERTISE Drive your CAREER development within a structured and supportive environment The Profile You have a passion for selling cutting-edge technology You thrive in a fast paced and dynamic work environment where being the best is paramount Your priority is always the customer You live for a challenge and you love to win Join us on our Journey to be #1 in SaaS and be part of our Cloud Success Story! You will find more information about open roles here

  Read the article

• Delivering SOA Governance with EAMS and Oracle Enterprise Repository by Link Consulting Team

  - by JuergenKress

  In the last 12 years Link Consulting has been making its presence in specific areas such as Governance and Architecture, both in terms of practices and methodologies, products, know-how and technological expertise. The Enterprise Architecture Management System - Oracle Enterprise Edition (EAMS - OER Edition) is the result of this experience and combines the architecture management solution with OER in order to deliver a product specialized for SOA Governance that gathers the better of two worlds in solution that enables SOA Governance projects, initiatives and programs. Enterprise Architecture Management System Enterprise Architecture Management System (EAMS), is an automation based solution that enables the efficient management of Enterprise Architectures. The solution uses configured enterprise repositories and takes advantages of its features to provide automation capabilities to the users. EAMS provides capabilities to create/customize/analyze repository data, architectural blueprints, reports and analytic charts. Oracle Enterprise Repository Oracle Enterprise Repository (OER) is one of the major and central elements of the Oracle SOA Governance solution. Oracle Enterprise Repository provides the tools to manage and govern the metadata for any type of software asset, from business processes and services to patterns, frameworks, applications, components, and models. OER maps the relationships and inter-dependencies that connect those assets to improve impact analysis, promote and optimize their reuse, and measure their impact on the bottom line. It provides the visibility, feedback, controls, and analytics to keep your SOA on track to deliver business value. The intense focus on automation helps to overcome barriers to SOA adoption and streamline governance throughout the lifecycle. Core capabilities of the OER include: Asset Management Asset Lifecycle Management Usage Tracking Service Discovery Version Management Dependency Analysis Portfolio Management EAMS - OER Edition The solution takes the advantages and features from both products and combines them in a symbiotic tool that enhances the quality of SOA Governance Initiatives and Programs. EAMS is able to produce a vast number of outputs by combining its analytical engine, SOA-specific configurations and the assets in OER and other related tools, catalogs and repositories. The configurations encompass not only the extendable parametrization of the metadata but also fully configurable blueprints, PowerPoint reports, charts and queries. The SOA blueprints The solution comes with a set of predefined architectural representations that help the organization better perceive their SOA landscape. More blueprints can be easily created in order to accommodate the organizations needs in terms of detail, audience and metadata. Charts & Dashboards The solution encompasses a set of predefined charts and dashboards that promote a more agile way to control and explore the assets. Time Based Visualization All representations are time bound, and with EAMS - OER you can truly govern SOA with a complete view of the Past, Present and Future; The solution delivers Gap Analysis, a project oriented approach while taking into consideration the As-Was, As-Is an To-Be. Time based visualization differentiating factors: Extensive automation and maintenance of architectural representations Organization wide solution. Easy access and navigation to and between all architectural artifacts and representations. Flexible meta-model, customization and extensibility capabilities. Lifecycle management and enforcement of the time dimension over all the repository content. Profile based customization. Comprehensive visibility Architectural alignment Friendly and striking user interfaces For more information on EAMS visit us here. For more information on SOA visit us here. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: Link Consulting,OER,OSR,SOA Governance,SOA Community,Oracle SOA,Oracle BPM,BPM Community,OPN,Jürgen Kress

  Read the article

• How would I handle input with a Game Component?

  - by Aufziehvogel

  I am currently having problems from finding my way into the component-oriented XNA design. I read an overview over the general design pattern and googled a lot of XNA examples. However, they seem to be right on the opposite site. In the general design pattern, an object (my current player) is passed to InputComponent::update(Player). This means the class will know what to do and how this will affect the game (e.g. move person vs. scroll text in a menu). Yet, in XNA GameComponent::update(GameTime) is called automatically without a reference to the current player. The only XNA examples I found built some sort of higher-level Keyboard engine into the game component like this: class InputComponent: GameComponent { public void keyReleased(Keys); public void keyPressed(Keys); public bool keyDown(Keys); public void override update(GameTime gameTime) { // compare previous state with current state and // determine if released, pressed, down or nothing } } Some others went a bit further making it possible to use a Service Locator by a design like this: interface IInputComponent { public void downwardsMovement(Keys); public void upwardsMovement(Keys); public bool pausedGame(Keys); // determine which keys pressed and what that means // can be done for different inputs in different implementations public void override update(GameTime); } Yet, then I am wondering if it is possible to design an input class to resolve all possible situations. Like in a menu a mouse click can mean "click that button", but in game play it can mean "shoot that weapon". So if I am using such a modular design with game components for input, how much logic is to be put into the InputComponent / KeyboardComponent / GamepadComponent and where is the rest handled? What I had in mind, when I heard about Game Components and Service Locator in XNA was something like this: use Game Components to run the InputHandler automatically in the loop use Service Locator to be able to switch input at runtime (i.e. let player choose if he wants to use a gamepad or a keyboard; or which shall be player 1 and which player 2). However, now I cannot see how this can be done. First code example does not seem flexible enough, as on a game pad you could require some combination of buttons for something that is possible on keyboard with only one button or with the mouse) The second code example seems really hard to implement, because the InputComponent has to know in which context we are currently. Moreover, you could imagine your application to be multi-layered and let the key-stroke go through all layers to the bottom-layer which requires a different behaviour than the InputComponent would have guessed from the top-layer. The general design pattern with passing the Player to update() does not have a representation in XNA and I also cannot see how and where to decide which class should be passed to update(). At most time of course the player, but sometimes there could be menu items you have to or can click I see that the question in general is already dealt with here, but probably from a more elobate point-of-view. At least, I am not smart enough in game development to understand it. I am searching for a rather code-based example directly for XNA. And the answer there leaves (a noob like) me still alone in how the object that should receive the detected event is chosen. Like if I have a key-up event, should it go to the text box or to the player?

  Read the article

• Social Search: Looking for Love

  - by Mike Stiles

  For marketers and enterprise executives who have placed a higher priority on and allocated bigger budgets to search over social, it might be time to notice yet another shift that’s well underway. Social is search. Search marketing was always more of an internal slam-dunk than other digital initiatives. Even a C-suite that understood little about the new technology world knew it’s a good thing when people are able to find you. Google was the new Yellow Pages. Only with Google, you could get your listing first without naming yourself “AAAA Plumbing.” There were wizards out there who could give your business prominence in front of people who were specifically looking for what you offered. Other search giants like Bing also came along to offer such ideal matchmaking possibilities. But what if the consumer isn’t using a search engine to find what they’re looking for? And what if the search engines started altering their algorithms so that search placement manipulation was more difficult? Both of those things have started to happen. Experian Hitwise’s numbers show that visits to the major search engines in the UK dropped 100 million through August. Search engines are far from dead, or even challenged. But more and more, the public is discovering the sites and brands they need through advice they get via social, not search. You’ll find the worlds of social and search increasingly co-mingling as well. Search behemoths Google and Bing are including Facebook and Google+ into their engines. Meanwhile, Facebook and Twitter have done some integration of global web search into their platforms. So what makes social such a worthwhile search entity for brands? First and foremost, the consumer has demonstrated a behavior of acting on recommendations from social connections. A cry in the wilderness like, “Anybody know any good catering companies?” will usually yield a link (and an endorsement) from a friend such as “Yeah, check out Just-Cheese-Balls Catering.” There’s no such human-driven force/influence behind the big search engines. Facebook’s Mark Zuckerberg and others call it “Friend Mining.” It is, in essence, searching for answers from friends’ experiences as opposed to faceless code. And Facebook has all of those friends’ experiences already stored as data. eMarketer says search in an $18 billion business, and investors are really into it. So no shock Facebook’s ready to leverage their social graph into relevant search. What do you do about all this as a brand? For one thing, it’s going to lead to some interesting paid marketing opportunities around the corner, including Sponsored Stories bought against certain queries, inserting deals into search results, capitalizing on social search results on mobile, etc. Apart from that, it might be time to stop mentally separating social and search in your strategic planning and budgeting. Courting your fans on social will cumulatively add up to more valuable, personally endorsed recommendations for your company when a consumer conducts a search on social. Fail to foster those relationships, fail to engage, fail to provide knock-em-dead customer service, fail to wow them with your actual products and services…and you’ll wind up with the visibility you deserve in social search results.

  Read the article

• PASS Summit 2012: keynote and Mobile BI announcements #sqlpass

  - by Marco Russo (SQLBI)

  Today at PASS Summit 2012 there have been several announcements during the keynote. Moreover, other news have not been highlighted in the keynote but are equally if not more important for the BI community. Let’s start from the big news in the keynote (other details on SQL Server Blog): Hekaton: this is the codename for in-memory OLTP technology that will appear (I suppose) in the next release of the SQL Server relational engine. The improvement in performance and scalability is impressive and it enables new scenarios. I’m curious to see whether it can be used also to improve ETL performance and how it differs from using SSD technology. Updates on Columnstore: In the next major release of SQL Server the columnstore indexes will be updatable and it will be possible to create a clustered index with Columnstore index. This is really a great news for near real-time reporting needs! Polybase: in 2013 it will debut SQL Server 2012 Parallel Data Warehouse (PDW), which will include the Polybase technology. By using Polybase a single T-SQL query will run queries across relational data and Hadoop data. A single query language for both. Sounds really interesting for using BigData in a more integrated way with existing relational databases. And, of course, to load a data warehouse using BigData, which is the ultimate goal that we all BI Pro have, right? SQL Server 2012 SP1: the Service Pack 1 for SQL Server 2012 is available now and it enable the use of PowerPivot for SharePoint and Power View on a SharePoint 2013 installation with Excel 2013. Power View works with Multidimensional cube: the long-awaited feature of being able to use PowerPivot with Multidimensional cubes has been shown by Amir Netz in an amazing demonstration during the keynote. The interesting thing is that the data model behind was based on a many-to-many relationship (something that is not fully supported by Power View with Tabular models). Another interesting aspect is that it is Analysis Services 2012 that supports DAX queries run on a Multidimensional model, enabling the use of any future tool generating DAX queries on top of a Multidimensional model. There are still no info about availability by now, but this is *not* included in SQL Server 2012 SP1. So what about Mobile BI? Well, even if not announced during the keynote, there is a dedicated session on this topic and there are very important news in this area: iOS, Android and Microsoft mobile platforms: the commitment is to get data exploration and visualization capabilities working within June 2013. This should impact at least Power View and SharePoint/Excel Services. This is the type of UI experience we are all waiting for, in order to satisfy the requests coming from users and customers. The important news here is that native applications will be available for both iOS and Windows 8 so it seems that Android will be supported initially only through the web. Unfortunately we haven’t seen any demo, so it’s not clear what will be the offline navigation experience (and whether there will be one). But at least we know that Microsoft is working on native applications in this area. I’m not too surprised that HTML5 is not the magic bullet for all the platforms. The next PASS Business Analytics conference in 2013 seems a good place to see this in action, even if I hope we don’t have to wait other six months before seeing some demo of native BI applications on mobile platforms! Viewing Reporting Services reports on iPad is supported starting with SQL Server 2012 SP1, which has been released today. This is another good reason to install SP1 on SQL Server 2012. If you are at PASS Summit 2012, come and join me, Alberto Ferrari and Chris Webb at our book signing event tomorrow, Thursday 8 2012, at the bookstore between 12:00pm and 12:30pm, or follow one of our sessions!

  Read the article

• Velocity collision detection (2D)

  - by ultifinitus

  Alright, so I have made a simple game engine (see youtube) And my current implementation of collision resolution has a slight problem, involving the velocity of a platform. Basically I run through all of the objects necessary to detect collisions on and resolve those collisions as I find them. Part of that resolution is setting the player's velocity = the platform's velocity. Which works great! Unless I have a row of platforms moving at different velocities or a platform between a stack of tiles.... (current system) bool player::handle_collisions() { collisions tcol; bool did_handle = false; bool thisObjectHandle = false; for (int temp = 0; temp < collideQueue.size(); temp++) { thisObjectHandle = false; tcol = get_collision(prevPos.x,y,get_img()->get_width(),get_img()->get_height(), collideQueue[temp]->get_position().x,collideQueue[temp]->get_position().y, collideQueue[temp]->get_img()->get_width(),collideQueue[temp]->get_img()->get_height()); if (prevPos.y >= collideQueue[temp]->get_prev_pos().y + collideQueue[temp]->get_img()->get_height()) if (tcol.top > 0) { add_pos(0,tcol.top); set_vel(get_vel().x,collideQueue[temp]->get_vel().y); thisObjectHandle = did_handle = true; } if (prevPos.y + get_img()->get_height() <= collideQueue[temp]->get_prev_pos().y) if (tcol.bottom > 0) { add_pos(collideQueue[temp]->get_vel().x,-tcol.bottom); set_vel(get_vel().x/*collideQueue[temp]->get_vel().x*/,collideQueue[temp]->get_vel().y); ableToJump = true; jumpTimes = maxjumpable; thisObjectHandle = did_handle = true; } /// /// ADD CODE FROM NEXT CODE BLOCK HERE (on forum, not in code) /// } for (int temp = 0; temp < collideQueue.size(); temp++) { thisObjectHandle = false; tcol = get_collision(x,y,get_img()->get_width(),get_img()->get_height(), collideQueue[temp]->get_position().x,collideQueue[temp]->get_position().y, collideQueue[temp]->get_img()->get_width(),collideQueue[temp]->get_img()->get_height()); if (prevPos.x + get_img()->get_width() <= collideQueue[temp]->get_prev_pos().x) if (tcol.left > 0) { add_pos(-tcol.left,0); set_vel(collideQueue[temp]->get_vel().x,get_vel().y); thisObjectHandle = did_handle = true; } if (prevPos.x >= collideQueue[temp]->get_prev_pos().x + collideQueue[temp]->get_img()->get_width()) if (tcol.right > 0) { add_pos(tcol.right,0); set_vel(collideQueue[temp]->get_vel().x,get_vel().y); thisObjectHandle = did_handle = true; } } return did_handle; } (if I add the following code {where the comment to do so is}, which is glitchy, the above problem doesn't happen, though it brings others) if (!thisObjectHandle) { if (tcol.bottom > tcol.top) { add_pos(collideQueue[temp]->get_vel().x,-tcol.bottom); set_vel(get_vel().x,collideQueue[temp]->get_vel().y); } else if (tcol.top > tcol.bottom) { add_pos(0,tcol.top); set_vel(get_vel().x,collideQueue[temp]->get_vel().y); } } How would you change my system to prevent this?

  Read the article

• SQL Server Optimizer Malfunction?

  - by Tony Davis

  There was a sharp intake of breath from the audience when Adam Machanic declared the SQL Server optimizer to be essentially "stuck in 1997". It was during his fascinating "Query Tuning Mastery: Manhandling Parallelism" session at the recent PASS SQL Summit. Paraphrasing somewhat, Adam (blog | @AdamMachanic) offered a convincing argument that the optimizer often delivers flawed plans based on assumptions that are no longer valid with today’s hardware. In 1997, when Microsoft engineers re-designed the database engine for SQL Server 7.0, SQL Server got its initial implementation of a cost-based optimizer. Up to SQL Server 2000, the developer often had to deploy a steady stream of hints in SQL statements to combat the occasionally wilful plan choices made by the optimizer. However, with each successive release, the optimizer has evolved and improved in its decision-making. It is still prone to the occasional stumble when we tackle difficult problems, join large numbers of tables, perform complex aggregations, and so on, but for most of us, most of the time, the optimizer purrs along efficiently in the background. Adam, however, challenged further any assumption that the current optimizer is competent at providing the most efficient plans for our more complex analytical queries, and in particular of offering up correctly parallelized plans. He painted a picture of a present where complex analytical queries have become ever more prevalent; where disk IO is ever faster so that reads from disk come into buffer cache faster than ever; where the improving RAM-to-data ratio means that we have a better chance of finding our data in cache. Most importantly, we have more CPUs at our disposal than ever before. To get these queries to perform, we not only need to have the right indexes, but also to be able to split the data up into subsets and spread its processing evenly across all these available CPUs. Improvements such as support for ColumnStore indexes are taking things in the right direction, but, unfortunately, deficiencies in the current Optimizer mean that SQL Server is yet to be able to exploit properly all those extra CPUs. Adam’s contention was that the current optimizer uses essentially the same costing model for many of its core operations as it did back in the days of SQL Server 7, based on assumptions that are no longer valid. One example he gave was a "slow disk" bias that may have been valid back in 1997 but certainly is not on modern disk systems. Essentially, the optimizer assesses the relative cost of serial versus parallel plans based on the assumption that there is no IO cost benefit from parallelization, only CPU. It assumes that a single request will saturate the IO channel, and so a query would not run any faster if we parallelized IO because the disk system simply wouldn’t be able to handle the extra pressure. As such, the optimizer often decides that a serial plan is lower cost, often in cases where a parallel plan would improve performance dramatically. It was challenging and thought provoking stuff, as were his techniques for driving parallelism through query logic based on subsets of rows that define the "grain" of the query. I highly recommend you catch the session if you missed it. I’m interested to hear though, when and how often people feel the force of the optimizer’s shortcomings. Barring mistakes, such as stale statistics, how often do you feel the Optimizer fails to find the plan you think it should, and what are the most common causes? Is it fighting to induce it toward parallelism? Combating unexpected plans, arising from table partitioning? Something altogether more prosaic? Cheers, Tony.

  Read the article

• Microsoft Certifications &ndash; how to prep? and why?

  - by Kelly Jones

  I often get asked by my colleagues, “how do you prepare for Microsoft exams?” Well, the answer for me is a little complicated, so I thought I’d write up here what I do. The first thing I do is go to Microsoft’s website to find the exam that I need to take.  If you’re looking to get a particular certification, then their site lists the exam or exams that you’ll need to pass.  If you’ve already taken an exam, you can log onto the MCP website and use their certification planner.  This little tool tells you what tests you need, based on the exams you’ve already passed.  It is very helpful with the certifications that are multiple tests and especially ones that have electives. Once you’ve identified the test, you can use Microsoft’s website to see the topics that it covers.  This is a good outline to follow when you study.  I’ll keep this handy to reference back throughout my studying to make sure that I’m covering all the topics I need to know. The next step is probably where I am a little different from others.  IF the exam outline covers material that I’ve already been working with, then I’ll skip a lot of the studying and go directly to the practice tests.  However, if I’m looking at the outline and wondering how in the world do you do that? – then it’s time to hit the books. So, where to find study materials?  Try typing in the exam number into any search engine.  You’ll typically find a ton of resources.  If you’re lucky, you’ll find books that others recommend based on their studying and exam experience.  As a Sogeti employee, I have access to three really good resources: an internal company list of all of the consultants who have passed particular tests (on our Connex website), Books 24x7, and Transcender practice exams. Once my studying is done (either through books or experience), I’ll go through the practice exams.  I find them really helpful in getting my knowledge lined up to the thinking process that the exam writers use.  If I’m relying on my experience, then this really helps me to identify gaps in my knowledge that I’ll need to fill. That’s about it.  If I’m doing ok on the practice exams, then I’ll take the real thing.  I’ve found that the practice exams are usually more difficult than then real thing. Oh – one other thing I do related to Microsoft exams – I try to take any beta exams that Microsoft makes available that fall into my skill set.  Microsoft has started a blog to announce these and the seats usually fill up really quick.  The blog is at http://blogs.technet.com/betaexams/ . You don’t get your results instantly, like a normal exam, instead you have to wait for everyone to finish taking the beta exams and for Microsoft to determine which questions they are using and which they are dropping.  So, be prepared to wait six to eight weeks for your results.

  Read the article

• Vertical Scrolling In Tile Based XNA Platformer

  - by alec100_94

  I'm making a 2D platformer in XNA 4.0. I have created a working tile engine, which works well for my purposes, and Horizontal Scrolling works flawlessly, however I am having great trouble with Vertical scrolling. I Basically want the camera to scroll up (world to scroll down) when the player reaches a certain Y co-ordinate, and I would also like to automatically scroll back down if coming down, and that co-ordinate is passed. My biggest problem is I have no real way of detecting the direction the player is moving in using only the Y Co-ord. Here Is My Code Code For The Camera Class (which appears to be a very different approach to most camera classes I have seen). using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.Xna.Framework; namespace Marvin { class Camera : TileEngine { public static bool startReached; public static bool endReached; public static void MoveRight(float speed = 2) { //Moves The Position of Each Tile Right foreach (Tile t in tiles) { if(t!=null) { t.position.X -= speed; } } } public static void MoveLeft(float speed = 2) { //Moves The Position of Each Tile Right foreach (Tile t in tiles) { if(t!=null) { t.position.X += speed; } } } public static void MoveUp(float speed = 2) { foreach (Tile t in tiles) { if(t!=null) { t.position.Y += speed; } } } public static void MoveDown(float speed = 2) { foreach (Tile t in tiles) { if(t!=null) { t.position.Y -= speed; } } } public static void Restrain() { if(tiles.Last().position.X<Main.graphics.PreferredBackBufferWidth-tiles.Last().size.X) { MoveLeft(); endReached = true; } else { endReached = false; } if(tiles[1].position.X>0) { MoveRight(); startReached = true;} else { startReached = false; } } } } Here is My Player Code for Left and Right Scrolling/Moving if (Main.currentKeyState.IsKeyDown(Keys.Right)) { Camera.MoveRight(); if(Camera.endReached) { MoveRight(2); } else { if(marvin.GetRectangle().X!=Main.graphics.PreferredBackBufferWidth-(marvin.GetRectangle().X+marvin.GetRectangle().Width)) { MoveRight(2); Camera.MoveLeft(); } } } if(Main.currentKeyState.IsKeyDown(Keys.Left)) { Camera.MoveLeft(); if(Camera.startReached) { MoveLeft(2); } else { if(marvin.GetRectangle().X!=Main.graphics.PreferredBackBufferWidth-(marvin.GetRectangle().X+marvin.GetRectangle().Width)) { MoveLeft(2); Camera.MoveRight(); } } } Camera.Restrain(); if(marvin.GetRectangle().X>Main.graphics.PreferredBackBufferWidth-marvin.GetRectangle().Width) { MoveLeft(2); } if(marvin.GetRectangle().X<0) { MoveRight(2); } And Here Is My Player Jumping/Falling Code which may cause some conflicts with the vertical camera movement. if (!jumping) { if(!TileEngine.TopOfTileCollidingWith(footBounds)) { MoveDown(5); } else { if(marvin.GetRectangle().Y != TileEngine.LastPlatformStoodOnTop()-marvin.GetRectangle().Height) { float difference = (TileEngine.LastPlatformStoodOnTop()-marvin.GetRectangle().Height) - (marvin.GetRectangle().Y); marvin.SetRectangle(marvin.GetRectangle().X,(int)(marvin.GetRectangle().Y+difference)); armR.SetRectangle(armR.GetRectangle().X,(int)(armR.GetRectangle().Y+difference)); armL.SetRectangle(armL.GetRectangle().X,(int)(armL.GetRectangle().Y+difference)); eyeL.SetRectangle(eyeL.GetRectangle().X,(int)(eyeL.GetRectangle().Y+difference)); eyeR.SetRectangle(eyeR.GetRectangle().X,(int)(eyeR.GetRectangle().Y+difference)); } } } if (Main.currentKeyState.IsKeyDown(Keys.Up) && Main.previousKeyState.IsKeyUp(Keys.Up) && TileEngine.TopOfTileCollidingWith(footBounds)) { jumping = true; } if(jumping) { if(TileEngine.LastPlatformStoodOnTop()>0 && (TileEngine.LastPlatformStoodOnTop() - footBounds.Bottom)<120) { MoveUp(5); } else { jumping = false; } } All player code I have tried for vertical movements has failed, or caused weird results (like falling through platforms), and most have been a variation on the method I described above, hence I have not included it. I would really appreciate some help implementing a simple vertical scrolling into this game, Thanks.

  Read the article

• My .NET Technology picks for 2011

  - by shiju

  My Technology predictions for 2011 Cloud computing and Mobile application development will be the hottest trends for 2011. I hope that Windows Azure will be very hot in year 2011 and lot of cloud computing adoption will be happen with Windows Azure on 2011. Web application scalability will be the big challenge for Architects in the next year and architecture approaches like CQRS will get some attention on next year. Architects will look on different options for web application scalability and adoption of NoSQL and Document databases will be more in the year 2011. The following are the my technology picks for .Net stack Windows Azure Windows Azure will be one of the hottest technologies of 2011. Adoption of Cloud and Windows Azure will get big attention on next year. The Windows Azure platform is a flexible cloud–computing platform that lets you focus on solving business problems and addressing customer needs. No need to invest upfront on expensive infrastructure. Pay only for what you use, scale up when you need capacity and pull it back when you don’t. We handle all the patches and maintenance — all in a secure environment with over 99.9% uptime. Silverlight 5 Silverlight is becoming a common technology for variety of development platforms. You can develop Silverlight applications for web, desktop and windows phone. The new Silverlight 5 beta will be available during the starting quarter of the next year with new capabilities and lot of new features. Silverlight 5 will be powerful development platform for both web-based business apps and rich media solutions. We can expect final version of Silverlight 5 on end of 2011. Windows Phone 7 Development Tools Mobile application development will be very hot in year 2011 and Windows Phone 7 will be one of the hottest technologies of next year. You can get introduction on Windows Phone 7 Development Tools from somasegar’s blog post and MSDN documentation available from here. EF Code First I am a big fan of Entity Framework’s Code First approach and hope that Code First approach will attract more people onto Entity Framework 4. EF Code First lets you focus on domain model which will enable Domain-Driven Development for applications. I hope that DDD fans will love the EF Code First approach. The Entity Framework 4 now supports three types of approaches and these will attract different types of developer audience. ASP.NET MVC 3 The ASP.NET MVC 3 will be the hottest technology of Microsoft web stack on the next year. ASP.NET developers will widely move to the ASP.NET MVC Framework from their WebForms development. The new Razor view engine is great and it will increase the adoption of ASP.NET MVC 3. Razor the will improve the productivity when working with ASP.NET MVC 3 Views. You can build great web applications using ASP.NET MVC 3 and jQuery with better maintainability, generation of clean HTML and even better performance. In my opinion, the best technology stack for web development is ASP.NET MVC 3 and Entity Framework 4 Code First as ORM. On the next year, you can expect more articles from my blog on ASP.NET MVC 3 and Entity Framework 4 Code First. RavenDB NoSQL and Document databases will get more attention on the coming year and RavenDB will be the most notable document database in the .NET stack. RavenDB is an Open Source (with a commercial option) document database for the .NET/Windows platform developed by Ayende Rahien. RavenDB is .NET focused document database which comes with a fully functional .NET client API and supports LINQ. I have written few articles on RavenDB and you can read it from here. Managed Extensibility Framework (MEF) Many people didn't realized the power of MEF. The MEF lets you create extensible applications and provides a great solution for the runtime extensibility problem. I hope that .NET developers will more adopt the MEF on the next year for their .NET applications. You can get an excellent introduction on MEF from Anoop Madhusudanan’s blog post MEF or Managed Extensibility Framework – Creating a Zoo and Animals

  Read the article

• Non use of persisted data

  - by Dave Ballantyne

  Working at a client site, that in itself is good to say, I ran into a set of circumstances that made me ponder, and appreciate, the optimizer engine a bit more. Working on optimizing a stored procedure, I found a piece of code similar to : select BillToAddressID, Rowguid, dbo.udfCleanGuid(rowguid) from sales.salesorderheaderwhere BillToAddressID = 985 A lovely scalar UDF was being used,  in actuality it was used as part of the WHERE clause but simplified here.  Normally I would use an inline table valued function here, but in this case it wasn't a good option. So this seemed like a pretty good case to use a persisted column to improve performance. The supporting index was already defined as create index idxBill on sales.salesorderheader(BillToAddressID) include (rowguid) and the function code is Create Function udfCleanGuid(@GUID uniqueidentifier)returns varchar(255)with schemabindingasbegin Declare @RetStr varchar(255) Select @RetStr=CAST(@Guid as varchar(255)) Select @RetStr=REPLACE(@Retstr,'-','') return @RetStrend Executing the Select statement produced a plan of : Nothing surprising, a seek to find the data and compute scalar to execute the UDF. Lets get optimizing and remove the UDF with a persisted column Alter table sales.salesorderheaderadd CleanedGuid as dbo.udfCleanGuid(rowguid)PERSISTED A subtle change to the SELECT statement… select BillToAddressID,CleanedGuid from sales.salesorderheaderwhere BillToAddressID = 985 and our new optimized plan looks like… Not a lot different from before!  We are using persisted data on our table, where is the lookup to fetch it ?  It didnt happen,  it was recalculated.  Looking at the properties of the relevant Compute Scalar would confirm this ,  but a more graphic example would be shown in the profiler SP:StatementCompleted event. Why did the lookup happen ? Remember the index definition,  it has included the original guid to avoid the lookup.  The optimizer knows this column will be passed into the UDF, run through its logic and decided that to recalculate is cheaper than the lookup.  That may or may not be the case in actuality,  the optimizer has no idea of the real cost of a scalar udf.  IMO the default cost of a scalar UDF should be seen as a lot higher than it is, since they are invariably higher. Knowing this, how do we avoid the function call?  Dropping the guid from the index is not an option, there may be other code reliant on it.   We are left with only one real option,  add the persisted column into the index. drop index Sales.SalesOrderHeader.idxBillgocreate index idxBill on sales.salesorderheader(BillToAddressID) include (rowguid,cleanedguid) Now if we repeat the statement select BillToAddressID,CleanedGuid from sales.salesorderheaderwhere BillToAddressID = 985 We still have a compute scalar operator, but this time it wasnt used to recalculate the persisted data.  This can be confirmed with profiler again. The takeaway here is,  just because you have persisted data dont automatically assumed that it is being used.

  Read the article

• Hijax == sneaky Javascript redirects? Will I get banned from Google?

  - by Chris Jacob

  Question Will I get penalised as "sneaky Javascript redirects" by Google if I have the following Hijax setup (which requires a JavaScript redirect on the page indexed by google). Goal I want to implement Hijax to enable AJAX content to be accessibile to non-JavaScript users and search engine crawlers. Background I'm working on a static file server (GitHub Pages). No server side tricks allowed (so Google's #! "hash bang" solution is not an option). I'm trying to keep my files DRY. I don't want to repeat the common OUTER template in all my files i.e. header, navigation menu, footer, etc They will live in the main index.html Setup the Hijax index.html page contains all OUTER html/css/js... the site's template. index.html has a <div id="content"> which defaults to containing the "homepage" html. index.html has a navigation menu, with a Hijax link to an "about" page. With JavaScript disabled (e.g. crawler) it follows link to /about.html. With JavaScript enabled (e.g. most people) the link updates the url hash fragment to /#about and jQuery replaces the <div id="content"> innerHTML with $("#content").load("about.html #inner-container");. AJAX content about.html does not contain anything extra to try an cloak content for crawlers. about.html file contains enough HTML / CSS / JavaScript to display /about.html as a standalone page with it's own META data... e.g. <html><head><title>About</title>...</head><body></body></html>. about.html has NO OUTER HTML template (i.e. header, navigation menu, footer, etc). about.html <body> contains a <div id="inner-container"> which holds the content that is injected into index.html. about.html has a <noscript> tag as the first child of <body> which explains to non-JavaScript users that they are viewing the about page "inner content" - with a link to navigate to the index.html page to get the full page layout with menu. The (Sneaky?) Redirect Google indexes the /about.html page. However when a person with JavaScript enabled visits that page there is no OUTER html template (e.g. header, navigation menu, footer, etc). So I need to do a JavaScript redirect to get the person over the /#about page (deeplinking to the "about" page "state" in index.html). I'm thinking of doing a "redirect on click or after 10 seconds". The end results is that user ends up on an "enhanced" page back on index.html with all it's OUTER template - but the core "page" content is practically identical. Known issue with inbound links e.g. Share / Bookmarking It seems that if a user shares the URL /#about on their blog, when allocating inbound links to my site Google ignores everything after the # ... it allocates value to the / page - See: http://stackoverflow.com/questions/5028405/hashbang-vs-hijax/5166665#5166665. I can only try an minimise this issue offering "share" buttons on the page with the appropriate urls i.e. /about.html. Duplicate Sorry. I posted this same question over on http://stackoverflow.com/questions/5561686/hijax-sneaky-javascript-redirects-will-i-get-banned-from-google ... then realised it probably belongs more on this Stack Exchange site... Not sure if I should delete the Stack Overflow question? Or just leave it on both sites? Please leave comment.

  Read the article

• The Best Data Integration for Exadata Comes from Oracle

  - by maria costanzo

  Oracle Data Integrator and Oracle GoldenGate offer unique and optimized data integration solutions for Oracle Exadata. For example, customers that choose to feed their data warehouse or reporting database with near real-time throughout the day, can do so without decreasing  performance or availability of source and target systems. And if you ask why real-time, the short answer is: in today’s fast-paced, always-on world, business decisions need to use more relevant, timely data to be able to act fast and seize opportunities. A longer response to "why real-time" question can be found in a related blog post. If we look at the solution architecture, as shown on the diagram below,  Oracle Data Integrator and Oracle GoldenGate are both uniquely designed to take full advantage of the power of the database and to eliminate unnecessary middle-tier components. Oracle Data Integrator (ODI) is the best bulk data loading solution for Exadata. ODI is the only ETL platform that can leverage the full power of Exadata, integrate directly on the Exadata machine without any additional hardware, and by far provides the simplest setup and fastest overall performance on an Exadata system. We regularly see customers achieving a 5-10 times boost when they move their ETL to ODI on Exadata. For  some companies the performance gain is even much higher. For example a large insurance company did a proof of concept comparing ODI vs a traditional ETL tool (one of the market leaders) on Exadata. The same process that was taking 5hrs and 11 minutes to complete using the competing ETL product took 7 minutes and 20 seconds with ODI. Oracle Data Integrator was 42 times faster than the conventional ETL when running on Exadata.This shows that Oracle's own data integration offering helps you to gain the most out of your Exadata investment with a truly optimized solution. GoldenGate is the best solution for streaming data from heterogeneous sources into Exadata in real time. Oracle GoldenGate can also be used together with Data Integrator for hybrid use cases that also demand non-invasive capture, high-speed real time replication. Oracle GoldenGate enables real-time data feeds from heterogeneous sources non-invasively, and delivers to the staging area on the target Exadata system. ODI runs directly on Exadata to use the database engine power to perform in-database transformations. Enterprise Data Quality is integrated with Oracle Data integrator and enables ODI to load trusted data into the data warehouse tables. Only Oracle can offer all these technical benefits wrapped into a single intelligence data warehouse solution that runs on Exadata. Compared to traditional ETL with add-on CDC this solution offers: §  Non-invasive data capture from heterogeneous sources and avoids any performance impact on source §  No mid-tier; set based transformations use database power §  Mini-batches throughout the day –or- bulk processing nightly which means maximum availability for the DW §  Integrated solution with Enterprise Data Quality enables leveraging trusted data in the data warehouse In addition to Starwood Hotels and Resorts, Morrison Supermarkets, United Kingdom’s fourth-largest food retailer, has seen the power of this solution for their new BI platform and shared their story with us. Morrisons needed to analyze data across a large number of manufacturing, warehousing, retail, and financial applications with the goal to achieve single view into operations for improved customer service. The retailer deployed Oracle GoldenGate and Oracle Data Integrator to bring new data into Oracle Exadata in near real-time and replicate the data into reporting structures within the data warehouse—extending visibility into operations. Using Oracle's data integration offering for Exadata, Morrisons produced financial reports in seconds, rather than minutes, and improved staff productivity and agility. You can read more about Morrison’s success story here and hear from Starwood here. From an Irem Radzik article.

  Read the article

• When does a Tumbling Window Start in StreamInsight

  Whilst getting some courseware ready I was playing around writing some code and I decided to very simply show when a window starts and ends based on you asking for a TumblingWindow of n time units in StreamInsight.  I thought this was going to be a two second thing but what I found was something I haven’t yet found documented anywhere until now.   All this code is written in C# and will slot straight into my favourite quick-win dev tool LinqPad   Let’s first create a sample dataset   var EnumerableCollection = new [] { new {id = 1, StartTime = DateTime.Parse("2010-10-01 12:00:00 PM").ToLocalTime()}, new {id = 2, StartTime = DateTime.Parse("2010-10-01 12:20:00 PM").ToLocalTime()}, new {id = 3, StartTime = DateTime.Parse("2010-10-01 12:30:00 PM").ToLocalTime()}, new {id = 4, StartTime = DateTime.Parse("2010-10-01 12:40:00 PM").ToLocalTime()}, new {id = 5, StartTime = DateTime.Parse("2010-10-01 12:50:00 PM").ToLocalTime()}, new {id = 6, StartTime = DateTime.Parse("2010-10-01 01:00:00 PM").ToLocalTime()}, new {id = 7, StartTime = DateTime.Parse("2010-10-01 01:10:00 PM").ToLocalTime()}, new {id = 8, StartTime = DateTime.Parse("2010-10-01 02:00:00 PM").ToLocalTime()}, new {id = 9, StartTime = DateTime.Parse("2010-10-01 03:20:00 PM").ToLocalTime()}, new {id = 10, StartTime = DateTime.Parse("2010-10-01 03:30:00 PM").ToLocalTime()}, new {id = 11, StartTime = DateTime.Parse("2010-10-01 04:40:00 PM").ToLocalTime()}, new {id = 12, StartTime = DateTime.Parse("2010-10-01 04:50:00 PM").ToLocalTime()}, new {id = 13, StartTime = DateTime.Parse("2010-10-01 05:00:00 PM").ToLocalTime()}, new {id = 14, StartTime = DateTime.Parse("2010-10-01 05:10:00 PM").ToLocalTime()} };   Now let’s create a stream of point events   var inputStream = EnumerableCollection .ToPointStream(Application,evt=> PointEvent .CreateInsert(evt.StartTime,evt),AdvanceTimeSettings.StrictlyIncreasingStartTime);   Now we can create our windows over the stream.  The first window we will create is a one hour tumbling window.  We’'ll count the events in the window but what we do here is not the point, the point is our window edges.   var windowedStream = from win in inputStream.TumblingWindow(TimeSpan.FromHours(1),HoppingWindowOutputPolicy.ClipToWindowEnd) select new {CountOfEntries = win.Count()};   Now we can have a look at what we get.  I am only going to show the first non Cti event as that is enough to demonstrate what is going on   windowedStream.ToIntervalEnumerable().First(e=> e.EventKind == EventKind.Insert).Dump("First Row from Windowed Stream");   The results are below   EventKind Insert   StartTime 01/10/2010 12:00   EndTime 01/10/2010 13:00     { CountOfEntries = 5 }   Payload CountOfEntries 5   Now this makes sense and is quite often the width of window specified in examples.  So what happens if I change the windowing code now to var windowedStream = from win in inputStream.TumblingWindow(TimeSpan.FromHours(5),HoppingWindowOutputPolicy.ClipToWindowEnd) select new {CountOfEntries = win.Count()}; Now where does your window start?  What about   var windowedStream = from win in inputStream.TumblingWindow(TimeSpan.FromMinutes(13),HoppingWindowOutputPolicy.ClipToWindowEnd) select new {CountOfEntries = win.Count()};   Well for the first example your window will start at 01/10/2010 10:00:00 , and for the second example it will start at  01/10/2010 11:55:00 Surprised?   Here is the reason why and thanks to the StreamInsight team for listening.   Windows start at TimeSpan.MinValue. Windows are then created from that point onwards of the size you specified in your code.  If a window contains no events they are not produced by the engine to the output.  This is why window start times can be before the first event is created.

  Read the article

• Investigating on xVelocity (VertiPaq) column size

  - by Marco Russo (SQLBI)

    In January I published an article about how to optimize high cardinality columns in VertiPaq. In the meantime, VertiPaq has been rebranded to xVelocity: the official name is now “xVelocity in-memory analytics engine (VertiPaq)” but using xVelocity and VertiPaq when we talk about Analysis Services has the same meaning. In this post I’ll show how to investigate on columns size of an existing Tabular database so that you can find the most important columns to be optimized. A first approach can be looking in the DataDir of Analysis Services and look for the folder containing the database. Then, look for the biggest files in all subfolders and you will find the name of a file that contains the name of the most expensive column. However, this heuristic process is not very optimized. A better approach is using a DMV that provides the exact information. For example, by using the following query (open SSMS, open an MDX query on the database you are interested to and execute it) you will see all database objects sorted by used size in a descending way. SELECT * FROM $SYSTEM.DISCOVER_STORAGE_TABLE_COLUMN_SEGMENTS ORDER BY used_size DESC You can look at the first rows in order to understand what are the most expensive columns in your tabular model. The interesting data provided are: TABLE_ID: it is the name of the object – it can be also a dictionary or an index COLUMN_ID: it is the column name the object belongs to – you can also see ID_TO_POS and POS_TO_ID in case they refer to internal indexes RECORDS_COUNT: it is the number of rows in the column USED_SIZE: it is the used memory for the object By looking at the ration between USED_SIZE and RECORDS_COUNT you can understand what you can do in order to optimize your tabular model. Your options are: Remove the column. Yes, if it contains data you will never use in a query, simply remove the column from the tabular model Change granularity. If you are tracking time and you included milliseconds but seconds would be enough, round the data source column to the nearest second. If you have a floating point number but two decimals are good enough (i.e. the temperature), round the number to the nearest decimal is relevant to you. Split the column. Create two or more columns that have to be combined together in order to produce the original value. This technique is described in VertiPaq optimization article. Sort the table by that column. When you read the data source, you might consider sorting data by this column, so that the compression will be more efficient. However, this technique works better on columns that don’t have too many distinct values and you will probably move the problem to another column. Sorting data starting from the lower density columns (those with a few number of distinct values) and going to higher density columns (those with high cardinality) is the technique that provides the best compression ratio. After the optimization you should be able to reduce the used size and improve the count/size ration you measured before. If you are interested in a longer discussion about internal storage in VertiPaq and you want understand why this approach can save you space (and time), you can attend my 24 Hours of PASS session “VertiPaq Under the Hood” on March 21 at 08:00 GMT.

  Read the article

• Rotating text using CSS

  - by Renso

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Goal: Rotating text using css only. How: Surprisingly IE supports this feature rather well. You could use property filters in IE, but since this is only supported on IE browsers, I would not recommend it. CSS3, still in proposal state, has a "writing-mode" property for doing this. It has been part of IE's browser engine since IE5.5. Now that it is part of the CSS3 draft specification, would be the best way to implement this going forward. Webkit based browsers; Firefox 3.5+, Opera 11 and IE9 implement this feature differently by utilizing the transform property. Without using third-party JavaScript or CSS properties, we can use the CSS3 "writing-mode" property, supported from IE5.5 up to IE8, the latter adding addition formatting options through -ms extensions. <style type="text/css"> .rightToLeft{ writing-mode: tb-rl; } </style> <p class="rightToLeft">This is my text</p> This will rotate the text 90 degrees, starting from the right to the left. Here are all the options: ·         lr-tb – Default value, left to right, top to bottom ·         rl-tb – Right to left, top to bottom ·         tb-rl – Vertically; top to bottom, right to left ·         bt-rl – Vertically; bottom to top, right to left ·         tb-lr – Available in IE8+: -ms-writing-mode; top to bottom, left to right ·         bt-lr – Bottom to top, left to right ·         lr-bt – Left to right, bottom to top What about Firefox, Safari, etc.? The following techniques need to be used on Webkit browsers like Firefox, Opera 11, Google Chrome and IE9. These browsers require their proprietary vendor extensions: -moz-, -webkit-, -o- and -ms-. -webkit-transform: rotate(90deg);    -moz-transform: rotate(90deg); -ms-transform: rotate(90deg); -o-transform: rotate(90deg); transform: rotate(90deg);

  Read the article

• Converting .docx to pdf (or .doc to pdf, or .doc to odt, etc.) with libreoffice on a webserver on the fly using php

  - by robertphyatt

  Ok, so I needed to convert .docx files to .pdf files on the fly, but none of the free php libraries that were available let me do it on my server (a webservice was not good enough). Basically either I needed to pay for a library (and have it maybe suck) or just deal with the free ones that didn't convert the formatting well enough. Not good enough! I found that LibreOffice (OpenOffice's successor) allows command line conversion using the LibreOffice conversion engine (which DID preserve the formatting like I wanted and generally worked great). I loaded the latest version of Ubuntu (http://www.ubuntu.com/download/ubuntu/download) onto my Virtual Box (https://www.virtualbox.org/wiki/Downloads) on my computer and found that I was able to easily convert files using the commandline like this: libreoffice --headless -convert-to pdf fileToConvert.docx -outdir output/path/for/pdf I thought: sweet...but I don't have admin rights on my host's web server. I tried to use a "portable" version of LibreOffice that I obtained from http://portablelinuxapps.org/ but I was unable to get it to work on my host's webserver, because my host's webserver didn't have all the dependencies (Dependency Hell! http://en.wikipedia.org/wiki/Dependency_hell) I was at a loss of how to make it work, until I ran across a cool project made by a Ph.D. student (Philip J. Guo) at Stanford called CDE: http://www.stanford.edu/~pgbovine/cde.html I will let you look at his explanations of how it works (I followed what he did in http://www.youtube.com/watch?feature=player_embedded&v=6XdwHo1BWwY, starting at about 32:00 as well as the directions on his site), but in short, it allows one to avoid dependency hell by copying all the files used when you run certain commands, recreating the linux environment where the command worked. I was able to use this to run LibreOffice without having to resort to someone's portable version of it, and it worked just like it did when I did it on Ubuntu with the command above, with a tweak: I needed to run the wrapper of LibreOffice the CDE generated. So, below is my PHP code that calls it. In this code snippet, the filename to be copied is passed in as $_POST["filename"]. I copy the file to the same spot where I originally converted the file, convert it, copy it back and then delete all the files (so that it doesn't start growing exponentially). I did it this way because I wasn't able to make it work otherwise on the webserver. If there is a linux + webserver ninja out there that can figure out how to make it work without doing this, I would be interested to know what you did. Please post a comment or something if you did that. <?php //first copy the file to the magic place where we can convert it to a pdf on the fly copy($time.$_POST["filename"], "../LibreOffice/cde-package/cde-root/home/robert/Desktop/".$_POST["filename"]); //change to that directory chdir('../LibreOffice/cde-package/cde-root/home/robert'); //the magic command that does the conversion $myCommand = "./libreoffice.cde --headless -convert-to pdf Desktop/".$_POST["filename"]." -outdir Desktop/"; exec ($myCommand); //copy the file back copy("Desktop/".str_replace(".docx", ".pdf", $_POST["filename"]), "../../../../../documents/".str_replace(".docx", ".pdf", $_POST["filename"])); //delete all the files out of the magic place where we can convert it to a pdf on the fly $files1 = scandir('Desktop'); //my files that I generated all happened to start with a number. $pattern = '/^[0-9]/'; foreach ($files1 as $value) { preg_match($pattern, $value, $matches); if(count($matches) ?> 0) { unlink("Desktop/".$value); } } //changing the header to the location of the file makes it work well on androids header( 'Location: '.str_replace(".docx", ".pdf", $_POST["filename"]) ); ?> And here is the tar.gz file I generated I generated with CDE. To duplicate what I did exactly, put the tar.gz file in a folder somewhere. I will call that folder the "root". Make a new folder called "documents" in the "root" folder. Unpack the tar.gz and run the php script above from the "documents" folder. Success! I made a truly portable version of LibreOffice that can convert files on the fly on a webserver using 100% free, open source software!

  Read the article

• Would this be a good web application architecture?

  - by Gustav Bertram

  My problem Our MVC based framework does not allow us to cache only part of our output. Ideally we want to cahce static and semi-static bits, and run dynamic bits. In addition, we need to consider data caching that reacts to database changes. My idea The concept I came up with was to represent a page as a tree of XML fragment objects. (I say XML, but I mean XHTML). Some of the fragments are dynamic, and can pull their data directly from models or other sources, but most of the fragments are static scaffolding. If a subtree of fragments is completely static, then I imagine that they could unfold into pure XML that would then be cached as the text representation of their parent element. This process would ideally continue until we are left with a root element that contains all of the static XML, and has a couple of dynamic XML fragments that are resolved and attached to the relevant nodes of the XML tree just before the page is displayed. In addition to separating content into dynamic and static fragments, some fragments could be dynamic and cached. A simple expiry time which propagates up through the XML fragment tree would indicate that a specific fragment should periodically be refreshed. A newspaper section or front page does not need to be updated each second. Minutes or sometimes even longer is sufficient. Other fragments would be dynamic and uncached. Typically too many articles are viewed for them to be cached - the cache would overflow. Some individual articles may be cached if they are extremely popular. Functional notes The folding mechanism could be to be smart enough to judge when it would be more profitable to fold a dynamic cached fragment and propagate the expiry date to the parent fragment, or to keep it separate and simple attach to the XML tree when resolving the page. If some dynamic cached fragments are associated to database objects through mechanisms like a globally unique content id, then changes to the database could trigger changes to the output cache. If fragments store the identifiers of parent fragments, then they could trigger a refolding process that would then include the updated data. A set of pure XML with an ordered array of fragment objects (that each store the identifying information of the node to which they should be attached), can be resolved in a fairly simple way by walking the XML tree, and merging the data from the fragments. Because it is not necessary to parse and construct the entire tree in memory before attaching nodes, processing should be fairly fast. The identifiers of each fragment would be a combination of relevant identity data and the type of fragment object. Cached parent fragments would contain references to these identifiers, in order to then either pull them from the fragment cache, or to run their code. The controller's responsibility is reduced to making changes to the database, and telling the root XML fragment object to render itself. The Question My question has two parts: Is this a good design? Are there any obvious flaws I'm missing? Has somebody else thought of this before? References? Is there an existing alternative that I should consider? A cool templating engine maybe?

  Read the article

• Why googling by keycaptcha gives results on reCAPTCHA? [closed]

  - by vgv8

  EDIT: I'd like to change this title to: How to STOP Google's manipulation of Google search engine presented to general public? I am frequently googling and more and more frequently bump when searching by one software product I am given instead the results on Google's own products. For ex., if I google by keyword keycaptcha for the "Past 24 hours" (after clicking on "Show search tools" -- "Past 24 hours" on the left sidebar of a browser) I am getting the Google's search results show only results on reCAPTCHA. Image uploaded later: Though, if confine keycaptcha in quotes the results are "correct" (well, kind of since they are still distorted in comparison with other search engines). I checked this during few months from different domains at different ISPs, different operating systems and from a dozen of browsers. The results are the same. Why is it and how can it be possibly corrected? My related posts: "How Gmail spam filter works?" IP adresses blacklisting Update: It is impossible for me to directly start using google.com as I am always redirected to google.ru (from google.com) by my ip-address "auto-detect location" google's "convenience". The google's help tells that it is impossible to switch off my location auto-detection because it is very helpful feature. There is a work-around to use google.com/ncr (to get google.com) (?anybody know what does it mean) to prevent redirection from google.com but even. But all results are exactly the same OK, I can search by quoted "keycaptcha", I am already accustomed to these google's quirks, but the question arises why the heck to burn time promoting someone's product if GOOGLE uses other product brands for showing its own interests/brands (reCAPTCHA) instead and what can be done with it? The general user will not understand that he was cheated and just will pick up the first (wrong) results Update2: Note that this googling behaviour: is independent on whether I am logged-in (or log-out-ed of) a google account, which account, on browser (I tried Opera, Chrome, FireFox, IE of different versions, Safari), OS or even domain; there are many such cases but I just targeted one concrete restricted example speciffically to to prevent wandering between unrelated details and peculiarities; @Michael, first it is not true and this text contains 2 links for real and significant results.. I also wrote that this is just one concrete example from many and based on many-month exp. These distortions happen upon clicking on: Past 24 hours, Past week, Past month, Past year in many other keywords, occasions/configurations of searches, etc. Second, the absence of the results is the result and there is no point to sneakingly substitute it by another unsolicited one. It is the definition of spam and scam. 3d, the question is not abt workarounds like how to write search queries or use another searching engines. The question is how to straighten the googling's results in order to stop disorienting general public about. Update: I could not understand: nobody reproduces the described by me behavior (i.e. when I click "Past 24 hours" link in google search searching for keycaptcha, the presented results are only on reCAPTCHA presented)? Update: And for the "Past week":

  Read the article

< Previous Page | 340 341 342 343 344 345 346 347 348 349 350 351  | Next Page >