Search Results

Search found 20822 results on 833 pages for 'remote desktop gateway'.

Page 344/833 | < Previous Page | 340 341 342 343 344 345 346 347 348 349 350 351  | Next Page >

• Ping "replies" from same computer with 'Destination host unreachable' (no route to other computer)

  - by Srekel

  I've got two computers in a LAN behind a wireless router. One has XP with ip 192.168.1.2 This one has W7 with ip 192.168.1.7 If I try to ping the other one from this computer, I get this: C:\Users\Srekel>ping 192.168.1.2 Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Tracert gives the same result: C:\Users\Srekel>tracert 192.168.1.2 Tracing route to 192.168.1.2 over a maximum of 30 hops 1 Kakburken4 [192.168.1.7] reports: Destination host unreachable. Trace complete. Although I can ping and tracert the router without any problems. I have disabled the firewalls on both computers. The router is set to use DHCP (if that matters). Here is the output from "route". C:\Users\Srekel>route print =========================================================================== Interface List 13...00 25 86 df c6 89 ......TP-LINK Wireless N Adapter 12...e0 cb 4e 26 b9 84 ......Realtek PCIe GBE Family Controller #2 11...e0 cb 4e 26 be 94 ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 14...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.7 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.7 276 192.168.1.7 255.255.255.255 On-link 192.168.1.7 276 192.168.1.255 255.255.255.255 On-link 192.168.1.7 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.7 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.7 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 14 58 ::/0 On-link 1 306 ::1/128 On-link 14 58 2001::/32 On-link 14 306 2001:0:5ef5:73ba:881:20c1:3f57:fef8/128 On-link 14 306 fe80::/64 On-link 14 306 fe80::881:20c1:3f57:fef8/128 On-link 1 306 ff00::/8 On-link 14 306 ff00::/8 On-link =========================================================================== Persistent Routes: None I've set up and debugged a few networks in my life but I'm not really an advanced network user, so I'm not sure what might be wrong. Any ideas? Oh, and pinging this computer from the other computer doesn't work either.

  Read the article

• C# Winforms vs WPF

  - by m0s

  Hi pros, I am a student and I do freelance here and there when I have opportunity. I believe my strongest language is C#. I don't really know what is going on in real programming world, so I was wondering if WPF did take over WinForms? I know the differences between two and how two can be used simultaneously but, I just don't want to invest my time in learning dying technologies, I hope you understand. So, for windows desktop programming what would you recommend to master WinForms, WPF or maybe both? I also get a lot that desktop programming is dead already and one should only care about learning web programming. Thanks for attention, any comments are greatly appreciated.

  Read the article

• Laptop LCD sometimes stops working on reboot. Please help.

  - by J Ringle

  I have a Gateway P-6831FX Laptop with Vista Ultimate. The Laptop LCD will sometimes not come on after I reboot the computer. I don't even close the lid and it happens. It isn't dim, it doesn't come on at all. No posting of CMOS (BIOS), nothing. Please note... this happens sometimes, not every time. Frustrating! When plugged into an external monitor, which works fine, Vista display properties can't even "sense" the laptop LCD. I try to enable the laptop LCD for dual display, turning on the laptop LCD, and it does nothing. It's like the laptop LCD is not even there. Manually taking a magnet in my hand to the laptop lid sensing switch (the sensor that turns off display/sleep mode when you close lid), sometimes causes the LCD backlight to "turn on" but not display any images. By "turn on" I mean I can see the screen backlight turn on to a 'dark gray' screen instead of pitch black. Subsequent reboot the laptop display is not working again! Here are the facts: Only happens at random and only after a reboot. Waking from Sleep mode isn't a problem. Pressing F4 function key for dual display does nothing when this happens. Closing lid doesn't seem to be related. (unless it is only after reboot.) using external magnet from laptop screen sensor sometimes triggers backlight to turn on but reboot back to square one with no LCD display. an external display always works fine. I have taken apart LCD, checked all wires and ribbons for loose connections or damage. I have replaced the Inverter. It doesn't seem to be heat related as I can put in sleep mode and resume fine when very hot. (external monitor works fine too). Sometimes the screen works fine as if there is not a problem at all. Even after a reboot... This is random. Any ideas out there? If it is a bad part... which one? The LCD seems to be fine. What are the odds of 2 bad inverters? The backlight is fine. The LCD wires/ribbons seem to be fine. I am at a loss. No warranty left and Gateway tech support is clueless. Thanks for any feedback that might help.

  Read the article

• Windows server RAS VPN client can't connect to internet

  - by Dragouf

  I configured a windows server 2008 RAS to connect automatically to a pptp vpn server. Problem is that when it connect I can't access internet from this server (the vpn client connect through RAS) Usually I ask vpn not to be use as the default gateway but this part is disable int the network interface - VPN interface properties : And I don't find how to ask to connect to internet directly....

  Read the article

• Two network adapters on Ubuntu Server 9.10 - Can't have both working at once?

  - by Rob

  I'm trying to set up two network adapters in Ubuntu (server edition) 9.10. One for the public internet, the other a private LAN. During the install, I was asked to pick a primary network adapter (eth0 or eth1). I chose eth0, gave the installer the details listed below in the contents of /etc/network/interfaces, and carried on. I've been using this adapter with these setting for the last few days, and every thing's been fine. Today, I decide it's time to set up the local adapter. I edit the /etc/network/interfaces to add the details for eth1 (see below), and restart networking with sudo /etc/init.d/networking restart. After this, attempting to ping the machine using it's external IP address fails, but I can ping it's local IP address. If I bring eth1 down using sudo ifdown eth1, I can successfully ping the machine via it's external IP address again (but obviously not it's internal IP address). Bringing eth1 back up returns us to the original problem state: external IP not working, internal IP working. Here's my /etc/network/interfaces (I've removed the external IP information, but these settings are unchanged from when it worked) rob@rhea:~$ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary (public) network interface auto eth0 iface eth0 inet static address xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx network xxx.xxx.xxx.xxx broadcast xxx.xxx.xxx.xxx gateway xxx.xxx.xxx.xxx # The secondary (private) network interface auto eth1 iface eth1 inet static address 192.168.99.4 netmask 255.255.255.0 network 192.168.99.0 broadcast 192.168.99.255 gateway 192.168.99.254 I then do this: rob@rhea:~$ sudo /etc/init.d/networking restart * Reconfiguring network interfaces... [ OK ] rob@rhea:~$ sudo ifup eth0 ifup: interface eth0 already configured rob@rhea:~$ sudo ifup eth1 ifup: interface eth1 already configured Then, from another machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for [external ip]: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), Back on the Ubuntu server in question: rob@rhea:~$ sudo ifdown eth1 ... and again on the other machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Ping statistics for [external ip]: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms So... what am I doing wrong?

  Read the article

• Help with router and spotty wireless...

  - by Moshe

  Time Warner Cable/ Road Runner router shows up some times on the network list on Mac OS X 10.6.3 Snow Leopard. It makes a spotty appearence on the list. The router is a SMC Networks Model # SMC8014WG-SI. The default gateway numbers all do not work. 192.168.0.1 192.168.1.1 192.168.2.1 10.10.10.1 What IP adress am I looking for here to log in to the router to fix the issue?

  Read the article

• How to transition to Comcast with static IP address

  - by steveha

  I have my own email server in my house, on a static IP address. I have had business DSL for over a decade, but I also now have Comcast business Internet. I want to transition from the DSL to the Comcast, and I have some questions. I have a domain name, my own mail server, and a firewall (a PC with two network interfaces, running Devil-Linux). I need to make sure I understand how to set up the Comcast cable box, and how to set up my firewall. First, do I need to change any settings in the cable box? Currently I have only used the cable box by plugging in a laptop, with the laptop doing DHCP. I think I can leave the box alone but I would like to make sure. Second, I'm not sure I understand the instructions Comcast gave me for setting up the firewall. My DSL provider gave me the following information: static IP address, net mask, gateway, and two DNS servers. Comcast gave me: static IP address, routable static IP address, net mask, and two DNS servers, and told me to put the "static IP address" as the "gateway" on the firewall. Is this just Comcast-speak here? Does "routable static IP address" mean the same thing as "static IP address" in my DSL setup, the end-point address that I should publish in the DNS MX records for my email server? Or should I publish the "static IP address", and Comcast will then route all its traffic over the cable box? My plan is: first, I'm going to configure another firewall, so I have one firewall for the DSL and one for the Comcast (rather than madly editing settings to switch back and forth). Then I will publish the new Comcast static IP address as a backup email server address in the DNS MX records, wait a while to let it propagate, and then switch my home over from the DSL to the Comcast. Then I'll change DNS to make that the primary mail address and the DSL the secondary, let that go a while and make sure it seems reliable. Then I'll remove the DSL from the DNS MX records completely, and finally shut down the DSL service. (I thought about keeping the DSL as a backup, but the reason I'm leaving DSL is that it has become unreliable; and I have heard that Comcast business Internet is reliable.) Final question, any advice for me? Anything you think might be useful, helpful, or educational. Thanks.

  Read the article

• Bazaar (bzr) predefined locations

  - by mkotechno

  Bazaar has a Launchpad pseudo-protocol (lp:) that able the user to operate in remote branchs without write full Launchpad location, I'm searching a way to create my own pseudo-protocols in a way like this (similar to GIT): bzr remote my sftp://[email protected]/home/myuser/myrepo/ bzr push my:mybranch bzr push my:otherbranch bzr push my:anotherbranch ...instead of... bzr push sftp://[email protected]/home/myuser/myrepo/mybranch bzr push sftp://[email protected]/home/myuser/myrepo/otherbranch bzr push sftp://[email protected]/home/myuser/myrepo/anotherbranch ...that is a pain in the ass. I readed about bazaar.conf but it seems only able you to set a globals push locations for each branch/repo. Another way I saw is to use alias, but has the same problem, is very ugly when is needed to create new branches. Is posible to do this without modify the BZR code? This should be obvious...

  Read the article

• Setup VPN access on a windows dedicated server for browsing

  - by Pasta

  I have a dedicated windows server. I want to create a VPN to encrypt my traffic (browsing, IM, etc) as I browse on my laptop using public wifi networks. What keywords should I be using to search Google? Are there any resources that help me do this? Most of the solutions are just to encrypt communication between the server to a machine. It does not act like an internet gateway, etc.

  Read the article

• How to debug a tcl script which is argument to an executable?

  - by user321047

  I have a application which takes tcl script as argument. I want to debug tcl script when the application processes it. My development environment consists of Dynamic Languages Toolkit from www.eclipse.org/dltk along with Active state remote debugger -dbgp_tcldebug. I am able to debug the individual tcl scripts with this setup. I created a tcl project in eclipse and added 'startup.tcl' and 'argumentScript.tcl' scripts and added following command to the startup script, set ExecutableName "xyz.exe" set returnValue [catch {eval exec $ExecutableName "argumentScript.tcl" } result] My debugger works fine with 'startup.tcl' script. I added the breakpoint in 'argumentScript.tcl' but it is not working. How can I debug the "argumentScript.tcl" script ? Edit: A solution without using eclipse environment is Tcl Dev Kit with remote debugging feature.

  Read the article

• LVDiff not working in Git

  - by Tanner

  I'm trying to get lvdiff from meta-diff suite to work with Git. My .gitconfig looks like this: [gui] recentrepo = C:/Users/Tanner/Desktop/FIRST 2010 Beta/Java/LoganRover [user] name = Tanner Smith email = [email protected] [merge "labview"] name = LabVIEW 3-Way Merge driver = 'C:/Program Files/National Instruments/Shared/LabVIEW Merge/LVMerge.exe' 'C:/Program Files/National Instruments/LabVIEW 8.6/LabVIEW.exe' %O %B %A %A recursive = binary [diff "lvdiff"] #command = 'C:/Program Files/meta-diff suite/lvdiff.exe' external = C:/Users/Tanner/Desktop/FIRST 2010 Beta/lvdiff.sh [core] autocrlf = true lvdiff.sh looks like this: #!/bin/sh "C:/Program Files/meta-diff suite/lvdiff.exe" "$2" "%5" | cat And my .gitattributes file looks like this: #Use a cusstom driver to merge LabVIEW files *.vi merge=labview #Use lvdiff as the externel diff program for LabVIEW files *.vi diff=lvdiff But everytime I do a diff, all Git returns is: diff --git a/Build DashBoard Data.vi b/Build DashBoard Data.vi index fd50547..662237f 100644 Binary files a/Build DashBoard Data.vi and b/Build DeashBoard Data.vi differ It is like it is not using it or even recognizing my changes. Any ideas?

  Read the article

• Linked servers SQLNCLI problem. "No transaction is active"

  - by Felipe Fiali

  Im trying to execute a stored procedure and simply insert its results in a temporary table, and I'm getting the following message: The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "MyServerName" was unable to begin a distributed transaction. OLE DB provider "SQLNCLI" for linked server "MyServerName" returned message "No transaction is active.". My query looks like this: INSERT INTO #TABLE EXEC MyServerName.MyDatabase.dbo.MyStoredProcedure Param1, Param2, Param3 Exact column number, names, the problem is not the result. MSDTC is allowed and started in both computers, Remote procedure calling too. The machines are not in the same domain, but I can execute remote queries from my machine and get the result. I can even execute the stored procedure and see its results, I just can't insert it in another table. Help, please? :)

  Read the article

• SSH port forwarding through Windows machine

  - by Leonardo Ramé

  is it possible to connect to an SSH server only accessible from inside a network, using a Windows machine without SSH as a gateway?. Let me clarify my question with a sketch: Me (Linux machine)--- WIN (Windows without SSHD)---LIN (Linux with SSHD). Machine Me, is the PC I'm using to connect to LIN through WIN. WIN is accessible from the outside, it has an RDESKTOP port open, and LIN is only accessible from inside the network. Hope you understand the question.

  Read the article

• Handling two WebException's properly

  - by baron

  Hi Everyone, I am trying to handle two different WebException's properly. Basically they are handled after calling WebClient.DownloadFile(string address, string fileName) AFAIK, so far there are two I have to handle, both WebException's: The remote name could not be resolved (i.e. No network connectivity to access server to download file) (404) File not nound (i.e. the file doesn't exist on the server) There may be more but this is what I've found most important so far. So how should I handle this properly, as they are both WebException's but I want to handle each case above differently. This is what I have so far: try { using (var client = new WebClient()) { client.DownloadFile("..."); } } catch(InvalidOperationException ioEx) { if (ioEx is WebException) { if (ioEx.Message.Contains("404") { //handle 404 } if (ioEx.Message.Contains("remote name could not") { //handle file doesn't exist } } } As you can see I am checking the message to see what type of WebException it is. I would assume there is a better or a more precise way to do this? Thanks

  Read the article

• String search and write into file in jython

  - by kdev

  hi Everyone , i wish to write a program that can read a file and if a particular str_to_find is found in a bigger string say AACATGCCACCTGAATTGGATGGAATTCATGCGGGACACGCGGATTACACCTATGAGCAGAAATACGGCCTGCGCGATTACCGTGGCGGTGGACGTTCTTCCGCGCGTGAAACCGCGATGCGCGTAGCGGCAGGGGCGATCGCCAAGAAATACCTGGCGGAAAAGTTCGGCATCGAAATCCGCGGCTGCCTGACCCAGATGGGCGACATTCCGCTGGAGATTAAAGACTGGCGTCAGGTTGAGCTTAATCCGTTTTC then write that line and the above line of it into the file and keep repeating it for all the match found. Please suggest i have written the program for printing that particular search line but i dont know how to write the above line. Thanks everyone for your help. import re import string file=open('C:/Users/Administrator/Desktop/input.txt','r') output=open('C:/Users/Administrator/Desktop/output.txt','w') count_record=file.readline() str_to_find='AACCATGC' while count_record: if string.find(list,str_to_find) ==0: output.write(count_record) file.close() output.close()

  Read the article

• Xenserver 5.5 U2 a bit unstable with an unstable W2003 VM

  - by twistedbrain

  In the last week I had to reboot the host system twice and the second one by means of the power button. The system is a Dell PE 6950 (4 Opteron dual core, 2,8 Ghz, 16 GB RAM, 900 GB disk in a RAID 10 array composed by 4 450GB 15000 rpm disks) with XenServer 5.5 U2. We're installing it and at now there are working in production a 2003 32 bit Windows server VM with 2 GB RAM, 3 vcpu and about 200 GB disk in 4 partition (12 GB boot, 20 GB program, 80 GB user data, 80 GB other data). The first time I was compressing many Windows 2003 folders (some tens GB by means of W2003 compressed folder option) from a Windows remote console and some hours before my colleague installed Backup Exec agent that was alredy installed and that required a reboot (that was pending). The console stopped responding, it was no more possible to connect by means of remote console or by means of the console of the XenCentre, it was still possible from the network to use the shared folder of the VM and the programs on it (2 db and a GIS program), but the print server didn't work any more and I couldn't give remote reboot from other domain controller hosts. I couldn't stop the virtual machine neither from the XenCentre, neither from the command line of the host also forcing the reboot. I had to reboot the host server. Yesterday it has been worst. I installed a template of another VM, CentOS 5.3 and then, put the DVD in the drive of the host. Then, before the install and after the boot I checked for defect the DVD and the W2003 VM began to respond slowly (I was connected by means of an administration remote console) the task manager showed only mid or low load, it is, only the first of the 3 vcpu was loaded (about 70%), while the other two were about at 20% and also the disk I/O was not so heavy. Then the users were not so happy because they couldn't any more use the MS word docs on the server. I immediately stopped the check of the DVD (to do that I had to force the stop of such Centos 5.3 VM), then some users could again use their docs, but other had still problems, so I decided to reboot the VM, but it doesn't stopped, neither from XenCenter, neither from command line, neither forcing the reboot. Then I tried to reboot of the host, but it didn't worked, neither from the XenCentre, neither from the host prompt (shutdown -r now as root: it told that it was shutting down, but then it didn't did that). So I had to power off by means of the power button of the server (before I tried some Magic SyS REQ, but I saw that Xen isn't compiled with this option enabled). What could you suggest about my problem, what can I look, search and see? In the W2003 VM logs there are no errors or warning to explain what happened. Some more exciting, amusing and inspiring words of poetry (the facts happened around 11 am): \# egrep -i 'err|warning' xensource.log [20100219 10:32:05.597|debug|culo|6301 unix-RPC|VBD.plug R:c81bcda701f6|xenops] watch: watching xenstore paths: [ /xapi/0/frontend/vbd/51712/hotplug; /local/domain/0/backend/vbd/0/51712/tapdisk-error ] with timeout 1200.000000 seconds [20100219 10:32:05.597|debug|culo|6301 unix-RPC|VBD.plug R:c81bcda701f6|xenops] watch: fired on /local/domain/0/backend/vbd/0/51712/tapdisk-error [20100219 10:32:14.314|debug|culo|6335 unix-RPC|VBD.unplug R:9258f54578d6|xenops] watch: watching xenstore paths: [ /local/domain/0/backend/vbd/0/51712/shutdown-done; /local/domain/0/error/device/vbd/51712/error ] with timeout 1200.000000 seconds [20100219 10:32:14.337|debug|culo|6335 unix-RPC|VBD.unplug R:9258f54578d6|xenops] xenstore-rm /local/domain/0/error/backend/vbd/0 [20100219 10:32:14.337|debug|culo|6335 unix-RPC|VBD.unplug R:9258f54578d6|xenops] xenstore-rm /local/domain/0/error/device/vbd/51712 [20100219 10:32:14.338|debug|culo|6335 unix-RPC|VBD.unplug R:9258f54578d6|xenops] watch: fired on /local/domain/0/error/device/vbd/51712/error [20100219 10:53:48.903|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|helpers] Ignoring exception: INTERNAL_ERROR: [ Xb.Noent ] while Vmops.destroy_domain: Destroying domid 14 guest session [20100219 10:53:52.048|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/tap/14 [20100219 10:53:52.048|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vbd/51744 [20100219 10:53:52.085|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/tap/14 [20100219 10:53:52.086|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vbd/51728 [20100219 10:53:52.122|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/tap/14 [20100219 10:53:52.122|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vbd/51712 [20100219 10:53:52.127|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/vbd/14 [20100219 10:53:52.128|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vbd/51760 [20100219 10:53:52.496|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] Device.Vif.hard_shutdown about to blow away backend and error paths [20100219 10:53:52.497|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/vif/14 [20100219 10:53:52.497|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vif/0 [20100219 10:53:53.385|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] Device.Vif.hard_shutdown about to blow away backend and error paths [20100219 10:53:53.386|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/vif/14 [20100219 10:53:53.386|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vif/1 [20100219 10:53:53.389| warn|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|hotplug] Warning, deleting 'vif' entry from /xapi/14/hotplug/vif/0 [20100219 10:53:53.391| warn|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|hotplug] Warning, deleting 'vif' entry from /xapi/14/hotplug/vif/1 [20100219 11:20:49.766|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|helpers] Ignoring exception: INTERNAL_ERROR: [ Xb.Noent ] while Vmops.destroy_domain: Destroying domid 11 guest session [20100219 11:20:50.339|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/0/error/backend/tap/11 [20100219 11:20:50.339|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/11/error/device/vbd/832 [20100219 11:20:50.360|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/0/error/backend/tap/11 [20100219 11:20:50.360|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/11/error/device/vbd/768 [20100219 11:20:50.366|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/0/error/backend/vbd/11 [20100219 11:20:50.366|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/11/error/device/vbd/5696 [20100219 11:20:50.753|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] Device.Vif.hard_shutdown about to blow away backend and error paths [20100219 11:20:50.754|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/0/error/backend/vif/11 [20100219 11:20:50.754|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/11/error/device/vif/1 [20100219 11:20:50.757| warn|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|hotplug] Warning, deleting 'vif' entry from /xapi/11/hotplug/vif/1 [20100219 11:28:13.803|debug|culo|6610 inet-RPC|Connection to VM console R:e9f8b76e8975|console] error: INTERNAL_ERROR: [ Unix.Unix_error(63, "connect", "") ]

  Read the article

• How to transition to Comcast with static IP address [migrated]

  - by steveha

  I have my own email server in my house, on a static IP address. I have had business DSL for over a decade, but I also now have Comcast business Internet. I want to transition from the DSL to the Comcast, and I have some questions. I have a domain name, my own mail server, and a firewall (a PC with two network interfaces, running Devil-Linux). I need to make sure I understand how to set up the Comcast cable box, and how to set up my firewall. First, do I need to change any settings in the cable box? Currently I have only used the cable box by plugging in a laptop, with the laptop doing DHCP. I think I can leave the box alone but I would like to make sure. Second, I'm not sure I understand the instructions Comcast gave me for setting up the firewall. My DSL provider gave me the following information: static IP address, net mask, gateway, and two DNS servers. Comcast gave me: static IP address, routable static IP address, net mask, and two DNS servers, and told me to put the "static IP address" as the "gateway" on the firewall. Is this just Comcast-speak here? Does "routable static IP address" mean the same thing as "static IP address" in my DSL setup, the end-point address that I should publish in the DNS MX records for my email server? Or should I publish the "static IP address", and Comcast will then route all its traffic over the cable box? My plan is: first, I'm going to configure another firewall, so I have one firewall for the DSL and one for the Comcast (rather than madly editing settings to switch back and forth). Then I will publish the new Comcast static IP address as a backup email server address in the DNS MX records, wait a while to let it propagate, and then switch my home over from the DSL to the Comcast. Then I'll change DNS to make that the primary mail address and the DSL the secondary, let that go a while and make sure it seems reliable. Then I'll remove the DSL from the DNS MX records completely, and finally shut down the DSL service. (I thought about keeping the DSL as a backup, but the reason I'm leaving DSL is that it has become unreliable; and I have heard that Comcast business Internet is reliable.) Final question, any advice for me? Anything you think might be useful, helpful, or educational. Thanks.

  Read the article

• Jruby Gems-in-a-jar issue

  - by antonio

  Hi all, I am trying to write some code in ruby (using jruby) to be compiled to java bytecode with jrubyc and deployed to a remote machine where it will be run on the JVM (no ruby available there). Everything works fine as long as I am happy to stick with the standard jruby library. As explained on the jruby website, I simply copy the jruby-complete.jar library to the remote machine and include it in the classpath at runtime. I fire my compiled script and it works: cool! The problems start when I need some other libraries (typically rubygems) to run my script. I am aware of cool stuff like rawr, -which I successfully tested- to put together all you need in a single package. However that is not the solution I am looking for: I will have many small scripts to run independently and I don't want each of them to grow to at least 10 MB just because I insanely include the jruby-complete.jar in each of them. What I would like is to compile a .jar for each of the libraries that I will need to use, put all of them in a common folder on the remote machine and include them at runtime in the classpath when I run my compiled jruby scripts on the JVM. This said, I tried to follow the instructions here: http://blog.nicksieger.com/articles/2009/01/10/jruby-1-1-6-gems-in-a-jar I tried exactly the example shown there, with the "chronic" gem. Going step by step: Install the gem locally: java -jar jruby-complete-1.1.6.jar -S gem install -i ./chronic chronic --no-rdoc --no-ri Package it into a jar: jar cf chronic.jar -C chronic . Write a two lines test script, saving it as testt.rb: require 'chronic' Chronic.parse('tomorrow') Compile with: jrubyc testt.rb Run the resulting java class testt.class with the following (having both jruby-complete.jar and chronic.jar in the same folder as the java class): java -cp .:/jruby-complete.jar:./chronic.jar testt I get the following error: Exception in thread "main" file:/Users/ave2/NetBeansProjects/jrubywatir/lib/jruby-complete.jar!/METAINF/jruby.home/lib/ruby/site_ruby/shared/builtin/core_ext/symbol.rb:1:in `const_missing': uninitialized constant Chronic (NameError) from testt.rb:2 ...internal jruby stack elided... from Module.const_missing(testt.rb:2) from (unknown).(unknown)(:1) I really don't understand what I am doing wrong, and I am totally stuck on this. I am a noob in Ruby, much more used to Python: don't miss a chance to convert an infidel! :-) Thanks.

  Read the article

• Restrict VPN client traffic to certain domains/IP

  - by mr-euro

  Hi Is there any way to restrict a VPN client to only route certain traffic via the VPN and the rest via their local gateway? For example: traffic to a certain IP or domain gets routed across the VPN and all other requests do not. Let me know if you need more details. Thank you.

  Read the article

• Connectivity issues with dual NIC machine in EC2

  - by Matt Sieker

  I'm trying to get some servers set up in EC2 in a Virtual Private Cloud. To do this, I have two subnets: 10.0.42.0/24 - Public subnet 10.0.83.0/24 - Private subnet To bridge these two, I have a Funtoo instance with a pair of NICs: eth0 10.0.42.10 eth1 10.0.83.10 Which has the following routing table: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.83.0 * 255.255.255.0 U 0 0 0 eth1 10.0.83.0 * 255.255.255.0 U 203 0 0 eth1 10.0.42.0 * 255.255.255.0 U 202 0 0 eth0 loopback * 255.0.0.0 U 0 0 0 lo default 10.0.42.1 0.0.0.0 UG 0 0 0 eth0 default 10.0.42.1 0.0.0.0 UG 202 0 0 eth0 An elastic IP is attached to the eth0 interface, and I can connect to it fine remotely. However, I cannot ping anything in the 10.0.83.0 subnet. For now iptables is not set up on the box, so there's no rules that would get in the way (Eventually this will be managed by Shorewall, but I should get basic connectivity done first) Subnet details from the VPC interface: CIDR: 10.0.83.0/24 Destination Target 10.0.0.0/16 local 0.0.0.0/0 [ID of eth1 on NAT box] Network ACL: Default Inbound: Rule # Port (Service) Protocol Source Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY Outbound: Rule # Port (Service) Protocol Destination Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY   CIDR: 10.0.83.0/24 VPC: Destination Target 10.0.0.0/16 local 0.0.0.0/0 [Internet Gateway ID] Network ACL: Default (replace) Inbound: Rule # Port (Service) Protocol Source Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY Outbound: Rule # Port (Service) Protocol Destination Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY I've been trying to work this out most of the evening, but I'm just stuck. I'm either missing something obvious, or am doing something very wrong. I would think I'd be able to ping from either interface on this box without issue. Hopefully some more pairs of eyes on this configuration will help. EDIT: I am an idiot. After I bothered to install nmap to run some more tests, I discover I can see the ports, and connect to them, pings are just being blocked.

  Read the article

• Gui window Positioning in Autohotkey

  - by Hitesh Chavda

  In Autohotkey, I want to position my Gui window to right bottom of the screen but how? For illustrate, +--------------------------------------+ | Desktop (screen) | | | | | | +----------+ | | | Gui | | | | window | | | | | | | | | | | +----------+ | +--------------------------------------+

  Read the article

• Howto: Configure Spring-WS to publish WSDL files with a '?WSDL' style URL?

  - by Darren

  I am trying to configure web service proxying using Mule ESB. I am attempting to do this using Mule's WSProxyService, but after stepping through the corresponding code (with the debugger), it is clear that this class replaces endpoint addresses. The problem is Spring-WS WSDL addresses are of the style http://xxxx/xxxx.wsdl, but WSProxyService expects http://xxxx/xxxx?wsdl or http://xxxx/xxxx&wsdl. It replaces the remote endpoint addresses with the local WSDL address; it cuts the remote WSDL address at the question mark i.e. '?WSDL' is intended to be chopped off, so to create the search term. But because of Spring-WS, this does not work. To break it down: WSProxyService ends up trying to use http://xxxx/xxxx.wsdl to replace http://xxxx/xxxx with http://yyyy/yyyy which fails... leading to actual web service call going direct and not through the proxy. Has anyone ever noticed/solved this problem?? Cheers, Darren

  Read the article

• Wireframe mock-up software

  - by Dave Jarvis

  Requirements Looking for wireframe mock-up software for web apps with the following constraints: Desktop application (supports Linux) (can be online) Export all pages to separate image files (PNG or SVG preferred) Template for all pages Drag and drop standard HTML widgets for <forms> Tabbed panels (that allow content on the different tabs) Shuttle controls Saves in an XML format (XSLT could convert to HTML) Widget alignment and resizing (relative to other widgets) Under $100.00 USD Examples That come close: Cacoo - Not a desktop application; does not have a true tabbed panel widget Pencil - Export feature has serious bugs (missing text); no template? Balsamiq - Installation proved cantankerous on Linux (due to Adobe AIR) Mockingbird - No shuttle controls; no auto-resize of widgets Pencil & paper - Not a good look for a formal document presented to clients Any others that meet the requirements?

  Read the article

• Synchronizing two SQL Server databases using MS Sync Framework

  - by Immortal

  I have one central SQL Server database which can be offline from time to time. I have a desktop application using Local DB Cache (SQL CE) to synchronize with the central database and I also have a web application with its own SQL Server that I'd also would like to keep synchronized. All synchronizations must be bidirectional. Is there a way to synchronize my central database with web application's database in the same way as I synchronize my central database with desktop client? I know about collaboration scenarios and peer-to-peer synchronization but I would like to avoid manual provisioning of databases. I'd like to use integrated sql server 2008 change tracking just like in the SQL CE <-- SQL Server scenario.

  Read the article

• Windows problems after boot

  - by Dan

  My gateway laptop gets all pixelated after Windows boots up. This just started not too long ago. I'm running Windows 7, with 2 GB of RAM.

  Read the article

< Previous Page | 340 341 342 343 344 345 346 347 348 349 350 351  | Next Page >