Search Results

Search found 30023 results on 1201 pages for 'version numbering'.

Page 345/1201 | < Previous Page | 341 342 343 344 345 346 347 348 349 350 351 352  | Next Page >

• Failing Sata HDD

  - by DaveCol

  I think my HDD is fried... Could someone confirm or help me restore it? I was using Hardware RAID 1 Configuration [2 x 160GB SATA HDD] on a CentOS 4 Installation. All of a sudden I started seeing bad sectors on the second HDD which stopped being mirrored. I have removed the RAID array and have tested with SMART which showed the following error: 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 I have no clue what this means, or if I can recover from it. Could someone give me some ideas on how to fix this, or what HDD to get to replace this? Complete SMART report: Smartctl version 5.33 [i686-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: GB0160CAABV Serial Number: 6RX58NAA Firmware Version: HPG1 User Capacity: 160,041,885,696 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Tue Oct 19 13:42:42 2010 COT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 433) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0002 097 097 000 Old_age Always - 0 4 Start_Stop_Count 0x0033 100 100 020 Pre-fail Always - 152 5 Reallocated_Sector_Ct 0x0033 095 095 036 Pre-fail Always - 214 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 73109713 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 15133 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0033 100 100 020 Pre-fail Always - 154 184 Unknown_Attribute 0x0032 038 038 000 Old_age Always - 62 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 189 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 190 Unknown_Attribute 0x001a 061 055 000 Old_age Always - 656408615 194 Temperature_Celsius 0x0000 039 045 000 Old_age Offline - 39 (Lifetime Min/Max 0/22) 195 Hardware_ECC_Recovered 0x0032 070 059 000 Old_age Always - 12605265 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 1 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 62 SMART Error Log Version: 1 ATA Error Count: 4645 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4645 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 02 7b 86 b1 ea 00 00:38:52.796 READ DMA ec 03 45 00 00 00 a0 00 00:38:52.796 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:52.794 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 04 79 86 b1 ea 00 00:38:49.935 READ DMA Error 4644 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 04 79 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:49.935 READ DMA Error 4643 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4642 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4641 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15131 - # 2 Short offline Completed without error 00% 15131 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

  Read the article

• firefox, jQuery ajax calls firing twice and never triggering success or error functions

  - by Adrian Adkison

  Hi, I am developing with the .NET framework, using jQuery 1.4.2 client side. When developing in Firefox version 3.6, every so often an one of the many ajax calls I make on the page will fire twice, the second will return successfully but will not trigger the success handler of the ajax call and the first never returns anything. So basically the data is all sent to the server and response is sent down but nothing happens with the response. Here is an example of the call I am making. It happens to any of the ajax calls, so there is not one particular that is causing the problem: $.ajax({ type:"POST", contentType : "application/json; charset=utf-8", data:"{}", dataType:"json", success:function(){ alert('success'); }, error:function(){ alert('error'); }, url:'/services.aspx/somemethod' }); }) From firebug, here are the headers of the first call which in firebug shows as never completely responding, meaning i see no response code and the loader gif in the firebug never goes away. Note:In firebug it usually says Response Header but for the first call this space is blank Server ASP.NET Development Server/9.0.0.0 X-AspNet-Version 2.0.50727 Content-Type application/json; charset=utf-8 Connection Close Request Headers Host mydomain.com User-Agent Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401Firefox/3.6.3 ( .NET CLR 3.5.30729) Accept application/json, text/javascript, */* Accept-Language en-us,en;q=0.5 Accept-Encoding gzip,deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 115 Connection keep-alive Content-Type application/json; charset=utf-8 X-Requested-With XMLHttpRequest Referer http://mydomain.com/mypage.aspx Here is the header from the second request which just appear to complete in firebug (i.e response is 200): Response Header Server ASP.NET Development Server/9.0.0.0 X-AspNet-Version 2.0.50727 Content-Type application/json; charset=utf-8 Connection Close Request Headers Host mydomain.com User-Agent Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 ( .NET CLR 3.5.30729) Accept text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language en-us,en;q=0.5 Accept-Encoding gzip,deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 115 Connection keep-alive Content-Type application/json; charset=utf-8 Referer http://mydomain.com/mypage.aspx To summarize my question, why are two requests being made and why are neither of them triggering a success or error handler in the ajax call. I have seen this article about firefox 3.5+ and preflighted requests https://developer.mozilla.org/En/HTTP_access_control#Preflighted_requests In the article is says if a "POST" is made with any other content type than "application/x-www-form-urlencoded, multipart/form-data, or text/plain" than the request is pre-flighted. If this is the case, this should happen to all of my calls. Thanks

  Read the article

• XmlSerializer giving FileNotFoundException at constructor

  - by Irwin

  An application I've been working with is failing when i try to serialize types. A statement like this: XmlSerialzer lizer = new XmlSerializer(typeof(MyType)); Produces: System.IO.FileNotFoundException occurred Message="Could not load file or assembly '[Containing Assembly of MyType].XmlSerializers, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified." Source="mscorlib" FileName="[Containing Assembly of MyType].XmlSerializers, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null" FusionLog="" StackTrace: at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) at System.Reflection.Assembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) I don't define any special serializers for my class.

  Read the article

• scalacheck/scalatest not found: how to add it in sbt/scala?

  - by Pavel Reich

  I've installed typesafe-stack from http://typesafe.com/stack/download on my ubuntu12, than I created a play project (g8 typesafehub/play-scala) and now I want to add scalatest or scalacheck to my project. So my_app/project/plugins.sbt has the following lines: // The Typesafe repository resolvers += "Typesafe repository" at "http://repo.typesafe.com/typesafe/releases/" // Use the Play sbt plugin for Play projects addSbtPlugin("play" % "sbt-plugin" % "2.0.1") Then I added scalatest using addSbtPlugin: addSbtPlugin("org.scalatest" %% "scalatest" % "2.0.M1" % "test") and now it fails with the following message when I run 'sbt test' [info] Resolving org.scalatest#scalatest;2.0.M1 ... [warn] module not found: org.scalatest#scalatest;2.0.M1 [warn] ==== typesafe-ivy-releases: tried [warn] http://repo.typesafe.com/typesafe/ivy-releases/org.scalatest/scalatest/scala_2.9.1/sbt_0.11.3/2.0.M1/ivys/ivy.xml [warn] ==== local: tried [warn] ~/.ivy2/local/org.scalatest/scalatest/scala_2.9.1/sbt_0.11.3/2.0.M1/ivys/ivy.xml [warn] ==== Typesafe repository: tried [warn] http://repo.typesafe.com/typesafe/releases/org/scalatest/scalatest_2.9.1_0.11.3/2.0.M1/scalatest-2.0.M1.pom [warn] ==== typesafe-ivy-releases: tried [warn] http://repo.typesafe.com/typesafe/ivy- releases/org.scalatest/scalatest/scala_2.9.1/sbt_0.11.3/2.0.M1/ivys/ivy.xml [warn] ==== public: tried [warn] http://repo1.maven.org/maven2/org/scalatest/scalatest_2.9.1_0.11.3/2.0.M1/scalatest-2.0.M1.pom What I don't understand: why does it use this http://repo.typesafe.com/typesafe/releases/org/scalatest/scalatest_2.9.1_0.11.3/2.0.M1/scalatest-2.0.M1.pom URL instead of the real one http://repo.typesafe.com/typesafe/releases/org/scalatest/scalatest_2.9.1/2.0.M1/scalatest_2.9.1-2.0.M1.pom? Quite the same problem I have with scalacheck: it also tries to download using sbt-version specific artifactId whereas the repository has only scala-version specific. What am I doing wrong? I understand there must be a switch in sbt somewhere, not to use sbt-version as part of the artifact URL? I also tried using this in my plugins.sbt libraryDependencies += "org.scalatest" %% "scalatest" % "2.0.M1" % "test" but looks like it is completely ignored by sbt and scalatest.jar hasn't appeared in the classpath: my_app/test/AppTest.scala:1: object scalatest is not a member of package org [error] import org.scalatest.FunSuite because the output of sbt clean && sbt test has lots of Resolving org.easytesting#fest-util;1.1.6 or just another library, but nothing about scalatest. I use scala 2.9.1 and sbt 0.11.3, trying to use scalatest 2.0.M1 and 1.8; scalacheck: resolvers ++= Seq( "snapshots" at "http://oss.sonatype.org/content/repositories/snapshots", "releases" at "http://oss.sonatype.org/content/repositories/releases" ) libraryDependencies ++= Seq( "org.scalacheck" %% "scalacheck" % "1.9" % "test" ) With the same outcome, i.e. it uses the sbtVersion specific POM URL, which doesn't exist. What am I doing wrong? Thanks.

  Read the article

• OSX, G/AWK, Bash - "illegal statement"

  - by S1syphus

  I have a script that somebody from SO kindly provided to solve an issue I was having, However, I'm having some issues getting it to work on OSX. gawk --version GNU Awk 3.1.6 awk --version awk version 20100208 The original source is: awk -F, -vOFS=, -vc=1 ' NR == 1 { for (i=1; i<NF; i++) { if ($i != "") { g[c]=i; f[c++]=$i } } } NR>2 { for (i=1; i < c; i++) { print $1,$2, $g[i] > "output_"f[i]".csv } }' data.csv When I run the script it gives the following error: awk: syntax error at source line 12 context is print $1,$2, $g[i] > >>> "output_"f <<< [i]".csv awk: illegal statement at source line 13 From the look of it the variable of [i] isn't been amended to the output file, but I don't know why. If I change AWK to GAWK and run the original script here is the output: gawk: cmd. line:11: print $1,$2, $g[i] > "output_"f[i]".csv gawk: cmd. line:11: ^ unterminated string So I edit the relevant line to fix the unterminated string print $1,$2, $g[i] > "output_"f[i]".csv" Then it runs through fine produces no errors, but there is no output files. Any ideas? I spent the majority of last night and this morning pouring over this. A sample input file: ,,L1,,,L2,,,L3,,,L4,,,L5,,,L6,,,L7,,,L8,,,L9,,,L10,,,L11, Title,r/t,needed,actual,Inst,needed,actual,Inst,needed,actual,Inst,needed,actual,Inst,neede d,actual,Inst,needed,actual,Inst,needed,actual,Inst,needed,actual,Inst,needed,actual,Inst,needed,actual,Inst,needed,actual,Inst EXAMPLEfoo,60,6,6,6,0,0,0,0,0,0,6,6,6,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 EXAMPLEbar,30,6,6,12,6,7,14,6,6,12,6,6,12,6,8,16,6,7,14,6,7.5,15,6,6,12,6,8,16,6,0,0,6,7,14 EXAMPLE1,60,3,3,3,3,5,5,3,4,4,3,3,3,3,6,6,3,4,4,3,3,3,3,4,4,3,8,8,3,0,0,3,4,4 EXAMPLE2,120,6,6,3,0,0,0,6,8,4,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 EXAMPLE3,60,6,6,6,6,8,8,6,6,6,6,6,6,0,0,0,0,0,0,6,8,8,6,6,6,0,0,0,0,0,0,0,10,10 EXAMPLE4,30,6,6,12,6,7,14,6,6,12,6,6,12,3,5.5,11,6,7.5,15,6,6,12,6,0,0,6,9,18,6,0,0,6,6.5,13 And the example out put should be So for L1 an example out put would look like: EXAMPLEfoo,60,6 EXAMPLEbar,30,6 EXAMPLE1,60,3 EXAMPLE2,120,6 EXAMPLE3,60,6 EXAMPLE4,30,6 And for L2: EXAMPLEfoo,60,0 EXAMPLEbar,30,6 EXAMPLE1,60,3 EXAMPLE2,120,0 EXAMPLE3,60,6 EXAMPLE4,30,6

  Read the article

• Python web devlopment framework for python 3.1 user

  - by iama

  I have been learning python for some time now. While starting this "learning python" endeavor I decided to learn the latest and greatest 3.1 version of python. I regret this decision now because I wanted to try my hands on some of the python web development frameworks & it looks like many of them does not support 3.1 yet & it looks like it might take them years to support the new version of Python especially Django and TurboGears. This is really disappointing. Therefore, SO users, do you have any recommendation for a web framework for me that runs on 3.1 and supports some of the modern (I guess I will never learn ;-)) web framework features like MVC/ORM/URL Routing/Caching etc. Many thanks for your response.

  Read the article

• Custom Glassfish Security Realm does not work (unable to find LoginModule)

  - by ifischer

  I'm trying to get a Custom Security Realm in Glassfish working (i tried 3.0.1 final and 3.1 B33). I read nearly all tutorials about this, but it doesn not work on my System. I'm getting the error Login failed: javax.security.auth.login.LoginException: unable to find LoginModule class: de.company.security.utility.CustomLoginModule when trying to login. Here is what i did: I created a little Maven project, which contains the needed Realm class, CustomRealm, and the corresponding LoginModule, CustomLoginModule. My pom.xml: <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd"> <modelVersion>4.0.0</modelVersion> <groupId>com.mycompany</groupId> <artifactId>CustomJDBCRealm</artifactId> <version>1.0-SNAPSHOT</version> <packaging>jar</packaging> <name>Custom JDBCRealm</name> <url>http://maven.apache.org</url> <properties> <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding> </properties> <dependencies> <dependency> <groupId>org.glassfish.security</groupId> <artifactId>security</artifactId> <version>3.1-b33</version> </dependency> </dependencies> <build> <plugins> <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-compiler-plugin</artifactId> <configuration> <source>1.6</source> <target>1.6</target> <optimise>true</optimise> <debug>true</debug> <encoding>UTF-8</encoding> </configuration> </plugin> </plugins> </build> </project> My Custom Realm class: package de.company.security.utility; import com.sun.appserv.security.AppservRealm; import com.sun.enterprise.security.auth.realm.BadRealmException; import com.sun.enterprise.security.auth.realm.InvalidOperationException; import com.sun.enterprise.security.auth.realm.NoSuchRealmException; import com.sun.enterprise.security.auth.realm.NoSuchUserException; import java.util.Enumeration; import java.util.Properties; import java.util.Vector; /** * * @author ifischer */ public class CustomRealm extends AppservRealm { Vector<String> groups = new Vector<String>(); private String jaasCtxName; private String startWith; @Override public void init(Properties properties) throws BadRealmException, NoSuchRealmException { jaasCtxName = properties.getProperty("jaas-context", "customRealm"); startWith = properties.getProperty("startWith", "z"); groups.add("dummy"); } @Override public String getAuthType() { return "Custom Realm"; } public String[] authenticate(String username, char[] password) { // if (isValidLogin(username, password)) return (String[]) groups.toArray(); } @Override public Enumeration getGroupNames(String username) throws InvalidOperationException, NoSuchUserException { return groups.elements(); } @Override public String getJAASContext() { return jaasCtxName; } public String getStartWith() { return startWith; } } My LoginModule class: /* * Copyright (c) 2010 ProfitBricks GmbH. All Rights Reserved. */ package de.company.security.utility; import com.sun.appserv.security.AppservPasswordLoginModule; import com.sun.enterprise.security.auth.login.common.LoginException; import java.util.Set; import org.glassfish.security.common.PrincipalImpl; /** * * @author ifischer */ public class CustomLoginModule extends AppservPasswordLoginModule { @Override protected void authenticateUser() throws LoginException { _logger.info("CustomRealm : authenticateUser for " + _username); final CustomRealm realm = (CustomRealm)_currentRealm; if ( (_username == null) || (_username.length() == 0) || !_username.startsWith(realm.getStartWith())) throw new LoginException("Invalid credentials"); String[] grpList = realm.authenticate(_username, getPasswordChar()); if (grpList == null) { throw new LoginException("User not in groups"); } _logger.info("CustomRealm : authenticateUser for " + _username); Set principals = _subject.getPrincipals(); principals.add(new PrincipalImpl(_username)); this.commitUserAuthentication(grpList); } } I compiled this Maven project and copyied the resulting JAR-file to the Glassfish/lib directory. Then i added the Security Realm "customRealm" to my Glassfish with asadmin: asadmin create-auth-realm --classname de.company.security.utility.CustomRealm --property jaas-context=customRealm:startWith=a customRealm I even referenced the LoginModule class for the JAAS context of my Custom Realm, therefore i inserted this into the login.conf of my domain: customRealm { de.company.security.utility.CustomLoginModule required; }; Although this LoginModule SHOULD BE on the Glassfish classpath, as it's classfiled is packaged in the JAR that i put into the Glassfish/lib-dir, it cannot be found when i try to login. For login, i build a really simple JSF-project, which calls the HttpServletRequest-login-method of Servlet 3.0. When trying to login i'm getting the following Exception: 2010-12-24T14:41:31.613+0100|WARNING|glassfish3.0.1| javax.enterprise.system.container.web.com.sun.web.security|_ThreadID=25; _ThreadName=Thread-1;|Web login failed: Login failed: javax.security.auth.login.LoginException: unable to find LoginModule class: de.company.security.utility.CustomLoginModule Anybody got an idea what i can do that Glassfish loads the LoginModule-class?

  Read the article

• No Microphone error on iPod Touch

  - by Bob Vork

  I've build an iPhone app that should work on an iPod Touch as well, but I'm getting reports that the app is not working on iPod touches. It's displaying an error message saying there's no mic available on the device. The thing is, the app does nothing whatsoever with audio, and I can't find anything related in the project settings. The other problem is I don't have an iPod Touch available to test this myself. Are some people running an old firmware version? Am I compiling the wrong firmware version? To my surprise I couldn't find anything about this on SO or Google… Any help is appreciated

  Read the article

• Memory allocation problem with SVMs in OpenCV

  - by worksintheory

  Hi, I've been using OpenCV happily for a while, but now I have a problem which has bugged me for quite some time. The following code is reasonably minimal example of my problem: #include <cv.h> #include <ml.h> using namespace cv; int main(int argc, char **argv) { int sampleCountForTesting = 2731; //BROKEN: Breaks svm.train_auto(...) for values of 2731 or greater! Mat trainingData( sampleCountForTesting, 1, CV_32FC1, Scalar::all(0.0) ); Mat trainingResponses( sampleCountForTesting, 1, CV_32FC1, Scalar::all(0.0) ); for(int j = 0; j < 6; j++) { trainingData.at<float>( j, 0 ) = (float) (j%2); trainingResponses.at<float>( j, 0 ) = (float) (j%2); //Setting a few values so I don't get a "single class" error } CvSVMParams svmParams( 100, //100 is CvSVM::C_SVC, 2, //2 is CvSVM::RBF, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, NULL, TermCriteria( TermCriteria::MAX_ITER | TermCriteria::EPS, 2, 1.0 ) ); CvSVM svm = CvSVM(); svm.train_auto( trainingData, trainingResponses, Mat(), Mat(), svmParams ); return 0; } I just create matrices to hold the training data and responses, then set a few entries to some value other than zero, then run the SVM. But it breaks whenever there are 2731 rows or more: OpenCV Error: One of arguments' values is out of range (requested size is negative or too big) in cvMemStorageAlloc, file [omitted]/opencv/OpenCV-2.2.0/modules/core/src/datastructs.cpp, line 332 With fewer rows, it seems to be fine and a classifier trained in a similar manner to the above seems to be giving reasonable output. Am I doing something wrong? I'm pretty sure it's not actually anything to do with lack of memory, as I've got 6GB and also the code works fine when the data has 2730 rows and 10000 columns, which is a much bigger allocation. I'm running OpenCV 2.2 on OSX 10.6 and initially I thought the problem might be related to this bug if for some reason the fix wasn't included in the MacPorts version. Now I've also tried downloading the most recent stable version from the OpenCV site and building with cmake and using that, but I still get the same error, and the fix is definitely included in that version. Any help would be much appreciated! Thanks,

  Read the article

• PayPal - CreateRecurringPaymentsProfile - is this request valid?

  - by PHP thinker

  I sending this request to make a recurring paypent (SOAP request to SandBox), but in response I get error message about missing token and other fields invalid (Missing Token or payment source). What could be wrong with this CreateRecurringPaymentsProfile request? <?xml version="1.0" encoding="UTF-8"?> <SOAP-ENV:Envelope xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/1999/XMLSchema" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"> <SOAP-ENV:Header> <RequesterCredentials xmlns="urn:ebay:api:PayPalAPI" SOAP-ENV:mustUnderstand="1"> <Credentials xmlns="urn:ebay:apis:eBLBaseComponents"> <Username>xxxxx_biz_api1.gmail.com</Username> <Password>xxxxxxx</Password> <Subject/> </Credentials> </RequesterCredentials> </SOAP-ENV:Header> <SOAP-ENV:Body> <CreateRecurringPaymentsProfileReq xmlns="urn:ebay:api:PayPalAPI"> <CreateRecurringPaymentsProfileRequest> <Version xmlns="urn:ebay:apis:eBLBaseComponents" xsi:type="xsd:string">58.0</Version> <CreateRecurringPaymentsProfileRequestDetails> <RecurringPaymentsProfileDetails xmlns="urn:ebay:apis:eBLBaseComponents"> <BillingStartDate></BillingStartDate> </RecurringPaymentsProfileDetails> <ScheduleDetails> <Description>Must match</Description> <PaymentPeriod> <BillingPeriod>Day</BillingPeriod> <BillingFrequency>1</BillingFrequency> <Amount>39.95</Amount> </PaymentPeriod> </ScheduleDetails> <Token>EC-480620864W522011V</Token> </CreateRecurringPaymentsProfileRequestDetails> </CreateRecurringPaymentsProfileRequest> </CreateRecurringPaymentsProfileReq> </SOAP-ENV:Body> P.S. I am sending this request the correct way, after "Doexpresscheckout" command.

  Read the article

• IE7 Debugging with Visual Studio Express

  - by HeavyWave

  How do I debug IE7 javascript with Visual Studio Express and which version should I use?

  Read the article

• MSSQL2008: DTC Transaction - Internal abort

  - by Teutales

  Hi all, I write a small own replication - a trigger which fires an DTC INSERT to another server (one reason for my own "replication": while trigger is running it calculates some data, another: it works from an express version to an express version). When I do the initial insert from the same Host with the windows authentification it works fine. But there is a webserver on another host, which uses the sqlserver login (for testing sa). When this Host do the initial insert I get a Internal abort after the entlisting and creating phase in the DTCTransaction EventClass (Profiler). The magic is: When I first fire it from the same Host with the windows authentification, I can fire it from the webserver and it works fine. But I just have to wait some minutes and it won't work. Where is my error in reasoning... Thanks! Greetz Teutales Here is my initial server script: EXEC master.dbo.sp_addlinkedserver @server = @Servername, @srvproduct=N'SQL Server' EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname = @Servername, @locallogin = NULL , @useself = N'False', @rmtuser = @Serverlogin, @rmtpassword = @Serverpwd

  Read the article

• SVN naming convention: repository, branches, tags

  - by LookitsPuck

  Hey all! Just curious what your naming conventions are for the following: Repository name Branches Tags Right now, we're employing the following standards with SVN, but would like to improve on it: Each project has its own repository Each repository has a set of directories: tags, branches, trunk Tags are immutable copies of the the tree (release, beta, rc, etc.) Branches are typically feature branches Trunk is ongoing development (quick additions, bug fixes, etc.) Now, with that said, I'm curious how everyone is not only handling the naming of their repositories, but also their tags and branches. For example, do you employ a camel case structure for the project name? So, if your project is something like Backyard Baseball for Youngins, how do you handle that? backyardBaseballForYoungins backyard_baseball_for_youngins BackyardBaseballForYoungins backyardbaseballforyoungins That seems rather trivial, but it's a question. If you're going with the feature branch paradigm, how do you name your feature branches? After the feature itself in plain English? Some sort of versioning scheme? I.e. say you want to add functionality to the Backyard Baseball app that allows users to add their own statistics. What would you call your branch? {repoName}/branches/user-add-statistics {repoName}/branches/userAddStatistics {repoName}/branches/user_add_statistics etc. Or: {repoName}/branches/1.1.0.1 If you go the version route, how do you correlate the version numbers? It seems that feature branches wouldn't benefit much from a versioning schema, being that 1 developer could be working on the "user add statistics" functionality, and another developer could be working on the "admin add statistics" functionality. How are these do branch versions named? Are they better off being: {repoName}/branches/1.1.0.1 - user add statistics {repoName}/branches/1.1.0.2 - admin add statistics And once they're merged into the trunk, the trunk might increment appropriately? Tags seem like they'd benefit the most from version numbers. With that being said, how are you correlating the versions for your project (whether it be trunk, branch, tag, etc.) with SVN? I.e. how do you, as the developer, know that 1.1.1 has admin add statistics, and user add statistics functionality? How are these descriptive and linked? It'd make sense for tags to have release notes in each tag since they're immutable. But, yeah, what are your SVN policies going forward?

  Read the article

• LicenseException for Xceed DataGrid for WPF

  - by ewall

  I have developed a simple DB-editing app using Xceed's excellent DataGrid for WPF (UX Edition version 3.7), which is now ready for deployment... except that when I run it on a machine other than the development one where it was built, I am getting the runtime exception for invalid licensing. I have included my license key in the App.xaml.cs exactly as specified in the Xceed docs, like so: public partial class App : System.Windows.Application { protected override void OnStartup(StartupEventArgs e) { Xceed.Wpf.DataGrid.Licenser.LicenseKey = "DGF37-xxxxx-xxxxx-xxxx"; base.OnStartup(e); } } The correct version of the DataGrid DLLs are being included in the setup and the application's program directory, and there are no other versions on the target machine. Debugging doesn't show me anything useful other than the LicenseException that is thrown when the code tries to use the DataGrid, with the message that reads "Xceed.Wpf.DataGrid.Licenser.LicenseKey property must be set to a valid license key in the code of your application before using this product..." Any idea what's going wrong here?

  Read the article

• How do I merge a transient entity with a session using Castle ActiveRecordMediator?

  - by Daniel T.

  I have a Store and a Product entity: public class Store { public Guid Id { get; set; } public int Version { get; set; } public ISet<Product> Products { get; set; } } public class Product { public Guid Id { get; set; } public int Version { get; set; } public Store ParentStore { get; set; } public string Name { get; set; } } In other words, I have a Store that can contain multiple Products in a bidirectional one-to-many relationship. I'm sending data back and forth between a web browser and a web service. The following steps emulates the communication between the two, using session-per-request. I first save a new instance of a Store: using (new SessionScope()) { // this is data from the browser var store = new Store { Id = Guid.Empty }; ActiveRecordMediator.SaveAndFlush(store); } Then I grab the store out of the DB, add a new product to it, and then save it: using (new SessionScope()) { // this is data from the browser var product = new Product { Id = Guid.Empty, Name = "Apples" }); var store = ActiveRecordLinq.AsQueryable<Store>().First(); store.Products.Add(product); ActiveRecordMediator.SaveAndFlush(store); } Up to this point, everything works well. Now I want to update the Product I just saved: using (new SessionScope()) { // data from browser var product = new Product { Id = Guid.Empty, Version = 1, Name = "Grapes" }; var store = ActiveRecordLinq.AsQueryable<Store>().First(); store.Products.Add(product); // throws exception on this call ActiveRecordMediator.SaveAndFlush(store); } When I try to update the product, I get the following exception: a different object with the same identifier value was already associated with the session: 00000000-0000-0000-0000-000000000000, of entity:Product" As I understand it, the problem is that when I get the Store out of the database, it also gets the Product that's associated with it. Both entities are persistent. Then I tried to save a transient Product (the one that has the updated info from the browser) that has the same ID as the one that's already associated with the session, and an exception is thrown. However, I don't know how to get around this problem. If I could get access to a NHibernate.ISession, I could call ISession.Merge() on it, but it doesn't look like ActiveRecordMediator has anything similar (SaveCopy threw the same exception). Does anyone know the solution? Any help would be greatly appreciated!

  Read the article

• Could not load file or assembly

  - by sldevelop

  Hi guys, I'm tring to create a generic collection of dynamic type at runtime of Silverlight application. My code: Type listType = Type.GetType("System.Collections.ObjectModel.ObservableCollection`1[[" + type.AssemblyQualifiedName + "]], System.Windows, Version=2.0.5.0, Culture=neutral, PublicKeyToken=7cec85d7bea7798e", true); type - is variable of Type type. That Type is creating at runtime. At that code line I've got error: Could not load file or assembly ', Version=0.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. How can I resolve that error?

  Read the article

• IE Debugging with Visual Studio Express

  - by HeavyWave

  How do I debug IE javascript with Visual Studio Express and which version should I use?

  Read the article

• Need to compare blobs in firebird

  - by Michael Beck

  Hey guys, I need to check on the contents of blobs in my databases (yes, plural, but one problem at a time). In one database, I have about 900 images of potentially varying sizes. I need to check to see if the versioning system that's built into our application is actually correctly replicating the image data from the previous version to the new version of a record. How do I compare values en masse so I don't have to pick through each record one at a time and open up the blob using FlameRobin or Firebird Maestro and visually compare these images? Thanks for any assistance.

  Read the article

• Get svn revision without an appropriate svn binary installed

  - by Sridhar Ratnakumar

  For some reason, we can't update the SVN in some build machines. Installed svn version is 1.3.x. But Hudson slave used 1.6 to create a checkout. This means we can't run "svn info" on those checkouts: $ svnversion subversion/libsvn_wc/questions.c:110: (apr_err=155021) svn: This client is too old to work with working copy '.'; please get a newer Subversion client $ svn info subversion/libsvn_wc/questions.c:110: (apr_err=155021) svn: This client is too old to work with working copy '.'; please get a newer Subversion client $ My question, is there a way to access the revision number without having to invoking the svn binary? You know, like trying to look into the .svn/ directory? Assume that the checkout is using latest svn version (1.6).

  Read the article

• NoSuchPortException using RXTX Java library on Windows?

  - by Steve

  I have followed the instructions to setup rxtx on windows from http://www.jcontrol.org/download/readme_rxtx_en.html. What I did exactly was copy rxtxSerial.dll to "C:\Program Files\Java\jdk1.6.0_07\jre\bin" and copied RXTXcomm.jar to "C:\Program Files\Java\jdk1.6.0_07\jre\lib\ext" (my JAVA_HOME variable is set to C:\Program Files\Java\jdk1.6.0_07\jre) I also added RXTXcomm.jar to my eclipse project. But when I run it, it still says "NoSuchPortException" Devel Library ========================================= Native lib Version = RXTX-2.0-7pre1 Java lib Version = RXTX-2.0-7pre1 java.lang.ClassCastException: gnu.io.RXTXCommDriver cannot be cast to gnu.io.CommDriver thrown while loading gnu.io.RXTXCommDriver gnu.io.NoSuchPortException at gnu.io.CommPortIdentifier.getPortIdentifier(CommPortIdentifier.java:218) at TwoWaySerialComm.connect(TwoWaySerialComm.java:20) at TwoWaySerialComm.main(TwoWaySerialComm.java:107) In my java file, I tell it: try { (new TwoWaySerialComm()).connect("COM4"); } and I've also tried the Java Comm API. Both cannot recognize my serial port but I am sure I followed the instruction correctly. There files are there. Does anybody have any idea what it could be?

  Read the article

• Fastest way to call a COM objects method without using a RCW

  - by Nathan W

  I'm trying to find the cleanest and fastest way for calling a COM objects methods. I was using a RCW for the object but every time a new version of the third party COM object comes out its GUID changes which then renders the RCW useless, so I had to change and start using Type mytype = Type.GetTypeFromProgID("MyCOMApp.Application"); so that every time a new version of the COM object comes out I don't have to recomplie and redeploy my app. At the moment I am using refelection like mytype.InvokeMemeber but I feel it is so slow compared to just calling the RCW. How does everyone else tackle the problem of changing 3rd party COM object versions, but still maintaining the speed of a RCW?

  Read the article

• apt-get update mdadm scary warnings

  - by user568829

  Just ran an apt-get update on one of my dedicated servers to be left with a relatively scary warning: Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-2.6.26-2-686-bigmem W: mdadm: the array /dev/md/1 with UUID c622dd79:496607cf:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. W: mdadm: the array /dev/md/2 with UUID 24120323:8c54087c:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. W: mdadm: the array /dev/md/6 with UUID eef74de5:9267b2a1:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. W: mdadm: the array /dev/md/5 with UUID 5d45b20c:04d8138f:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. As instructed I inspected the output of /usr/share/mdadm/mkconf and compared with /etc/mdadm/mdadm.conf and they are quite different. Here is the /etc/mdadm/mdadm.conf contents: # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays ARRAY /dev/md0 level=raid1 num-devices=2 UUID=b93b0b87:5f7c2c46:0043fca9:4026c400 ARRAY /dev/md1 level=raid1 num-devices=2 UUID=c0fa8842:e214fb1a:fad8a3a2:28f2aabc ARRAY /dev/md2 level=raid1 num-devices=2 UUID=cdc2a9a9:63bbda21:f55e806c:a5371897 ARRAY /dev/md3 level=raid1 num-devices=2 UUID=eca75495:9c9ce18c:d2bac587:f1e79d80 # This file was auto-generated on Wed, 04 Nov 2009 11:32:16 +0100 # by mkconf $Id$ And here is the out put from /usr/share/mdadm/mkconf # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays ARRAY /dev/md1 UUID=c622dd79:496607cf:c230666b:5103eba0 ARRAY /dev/md2 UUID=24120323:8c54087c:c230666b:5103eba0 ARRAY /dev/md5 UUID=5d45b20c:04d8138f:c230666b:5103eba0 ARRAY /dev/md6 UUID=eef74de5:9267b2a1:c230666b:5103eba0 # This configuration was auto-generated on Sat, 25 Feb 2012 13:10:00 +1030 # by mkconf 3.1.4-1+8efb9d1+squeeze1 As I understand it I need to replace the four lines that start with 'ARRAY' in the /etc/mdadm/mdadm.conf file with the different four 'ARRAY' lines from the /usr/share/mdadm/mkconf output. When I did this and then ran update-initramfs -u there were no more warnings. Is what I have done above correct? I am now terrified of rebooting the server for fear it will not reboot and being a remote dedicated server this would certainly mean downtime and possibly would be expensive to get running again. FOLLOW UP (response to question): the output from mount: /dev/md1 on / type ext3 (rw,usrquota,grpquota) tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type tmpfs (rw,mode=0755) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620) /dev/md2 on /boot type ext2 (rw) /dev/md5 on /tmp type ext3 (rw) /dev/md6 on /home type ext3 (rw,usrquota,grpquota) mdadm --detail /dev/md0 mdadm: md device /dev/md0 does not appear to be active. mdadm --detail /dev/md1 /dev/md1: Version : 0.90 Creation Time : Sun Aug 14 09:43:08 2011 Raid Level : raid1 Array Size : 31463232 (30.01 GiB 32.22 GB) Used Dev Size : 31463232 (30.01 GiB 32.22 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Sat Feb 25 14:03:47 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : c622dd79:496607cf:c230666b:5103eba0 Events : 0.24 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 17 1 active sync /dev/sdb1 mdadm --detail /dev/md2 /dev/md2: Version : 0.90 Creation Time : Sun Aug 14 09:43:09 2011 Raid Level : raid1 Array Size : 104320 (101.89 MiB 106.82 MB) Used Dev Size : 104320 (101.89 MiB 106.82 MB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Sat Feb 25 13:20:20 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 24120323:8c54087c:c230666b:5103eba0 Events : 0.30 Number Major Minor RaidDevice State 0 8 2 0 active sync /dev/sda2 1 8 18 1 active sync /dev/sdb2 mdadm --detail /dev/md3 mdadm: md device /dev/md3 does not appear to be active. mdadm --detail /dev/md5 /dev/md5: Version : 0.90 Creation Time : Sun Aug 14 09:43:09 2011 Raid Level : raid1 Array Size : 2104448 (2.01 GiB 2.15 GB) Used Dev Size : 2104448 (2.01 GiB 2.15 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 5 Persistence : Superblock is persistent Update Time : Sat Feb 25 14:09:03 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 5d45b20c:04d8138f:c230666b:5103eba0 Events : 0.30 Number Major Minor RaidDevice State 0 8 5 0 active sync /dev/sda5 1 8 21 1 active sync /dev/sdb5 mdadm --detail /dev/md6 /dev/md6: Version : 0.90 Creation Time : Sun Aug 14 09:43:09 2011 Raid Level : raid1 Array Size : 453659456 (432.64 GiB 464.55 GB) Used Dev Size : 453659456 (432.64 GiB 464.55 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 6 Persistence : Superblock is persistent Update Time : Sat Feb 25 14:10:00 2012 State : active Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : eef74de5:9267b2a1:c230666b:5103eba0 Events : 0.31 Number Major Minor RaidDevice State 0 8 6 0 active sync /dev/sda6 1 8 22 1 active sync /dev/sdb6 FOLLOW UP 2 (response to question): Output from /etc/fstab /dev/md1 / ext3 defaults,usrquota,grpquota 1 1 devpts /dev/pts devpts mode=0620,gid=5 0 0 proc /proc proc defaults 0 0 #usbdevfs /proc/bus/usb usbdevfs noauto 0 0 /dev/cdrom /media/cdrom auto ro,noauto,user,exec 0 0 /dev/dvd /media/dvd auto ro,noauto,user,exec 0 0 # # # /dev/md2 /boot ext2 defaults 1 2 /dev/sda3 swap swap pri=42 0 0 /dev/sdb3 swap swap pri=42 0 0 /dev/md5 /tmp ext3 defaults 0 0 /dev/md6 /home ext3 defaults,usrquota,grpquota 1 2

  Read the article

• How to make custom WCF error handler return JSON response with non-OK http code?

  - by John

  I'm implementing a RESTful web service using WCF and the WebHttpBinding. Currently I'm working on the error handling logic, implementing a custom error handler (IErrorHandler); the aim is to have it catch any uncaught exceptions thrown by operations and then return a JSON error object (including say an error code and error message - e.g. { "errorCode": 123, "errorMessage": "bla" }) back to the browser user along with an an HTTP code such as BadRequest, InteralServerError or whatever (anything other than 'OK' really). Here is the code I am using inside the ProvideFault method of my error handler: fault = Message.CreateMessage(version, "", errorObject, new DataContractJsonSerializer(typeof(ErrorMessage))); var wbf = new WebBodyFormatMessageProperty(WebContentFormat.Json); fault.Properties.Add(WebBodyFormatMessageProperty.Name, wbf); var rmp = new HttpResponseMessageProperty(); rmp.StatusCode = System.Net.HttpStatusCode.InternalServerError; rmp.Headers.Add(HttpRequestHeader.ContentType, "application/json"); fault.Properties.Add(HttpResponseMessageProperty.Name, rmp); -- This returns with Content-Type: application/json, however the status code is 'OK' instead of 'InternalServerError'. fault = Message.CreateMessage(version, "", errorObject, new DataContractJsonSerializer(typeof(ErrorMessage))); var wbf = new WebBodyFormatMessageProperty(WebContentFormat.Json); fault.Properties.Add(WebBodyFormatMessageProperty.Name, wbf); var rmp = new HttpResponseMessageProperty(); rmp.StatusCode = System.Net.HttpStatusCode.InternalServerError; //rmp.Headers.Add(HttpRequestHeader.ContentType, "application/json"); fault.Properties.Add(HttpResponseMessageProperty.Name, rmp); -- This returns with the correct status code, however the content-type is now XML. fault = Message.CreateMessage(version, "", errorObject, new DataContractJsonSerializer(typeof(ErrorMessage))); var wbf = new WebBodyFormatMessageProperty(WebContentFormat.Json); fault.Properties.Add(WebBodyFormatMessageProperty.Name, wbf); var response = WebOperationContext.Current.OutgoingResponse; response.ContentType = "application/json"; response.StatusCode = HttpStatusCode.InternalServerError; -- This returns with the correct status code and the correct content-type! The problem is that the http body now has the text 'Failed to load source for: http://localhost:7000/bla..' instead of the actual JSON data.. Any ideas? I'm considering using the last approach and just sticking the JSON in the HTTP StatusMessage header field instead of in the body, but this doesn't seem quite as nice?

  Read the article

• How do I print an array in Rails?

  - by Abid Hussain

  I am new to Rails and I am using Ruby version 1.9.3 and Rails version 3.0.0. I want to print an array in Rails. How do I do that? For example, we have to use print_r to print an array in PHP: <?php $a = array ('a' => 'apple', 'b' => 'banana', 'c' => array ('x', 'y', 'z')); print_r ($a); ?> Output: <pre> Array ( [a] => apple [b] => banana [c] => Array ( [0] => x [1] => y [2] => z ) ) </pre> How do I print an array in Rails?

  Read the article

• How to GET a read-only vs editable resource in REST style?

  - by Val

  I'm fairly familiar with REST principles, and have read the relevant dissertation, Wikipedia entry, a bunch of blog posts and StackOverflow questions on the subject, but still haven't found a straightforward answer to a common case: I need to request a resource to display. Depending on the resource's state, I need to render either a read-only or an editable representation. In both cases, I need to GET the resource. How do I construct a URL to get the read-only or editable version? If my user follows a link to GET /resource/<id>, that should suffice to indicate to me that s/he needs the read-only representation. But if I need to server up an editable form, what does that URL look like? GET /resource/<id>/edit is obvious, but it contains a verb in the URL. Changing that to GET /resource/<id>/editable solves that problem, but at a seemingly superficial level. Is that all there is to it -- change verbs to adjectives? If instead I use POST to retrieve the editable version, then how do I distinguish between the POST that initially retrieves it, vs the POST that saves it? My (weak) excuse for using POST would be that retrieving an editable version would cause a change of state on the server: locking the resource. But that only holds if my requirements are to implement such a lock, which is not always the case. PUT fails for the same reason, plus PUT is not enabled by default on the Web servers I'm running, so there are practical reasons not to use it (and DELETE). Note that even in the editable state, I haven't made any changes yet; presumably when I submit the resource to the Web server again, I'd POST it. But to get something that I can later POST, the server has to first serve up a particular representation. I guess another approach would be to have separate resources at the collection level: GET /read-only/resource/<id> and GET /editable/resource/<id> or GET /resource/read-only/<id> and GET /resource/editable/<id> ... but that looks pretty ugly to me. Thoughts?

  Read the article

< Previous Page | 341 342 343 344 345 346 347 348 349 350 351 352  | Next Page >