Search Results

Search found 8725 results on 349 pages for 'beginning steps'.

Page 346/349 | < Previous Page | 342 343 344 345 346 347 348 349  | Next Page >

  • Why doesn't pppd over ssh work here? Why can't I kill pppd?

    - by Peter V. Mørch
    I'm trying to setup a simple ppp tunnel over ssh. It works on several machines just fine. But on one machine, pppd gets "stuck": > pgrep pppd | xargs ps up USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 4178 0.0 0.1 3020 1088 pts/1 Ds+ 05:28 0:00 /usr/sbin/pppd Any attempt to kill it (even sudo kill -9 4178) has no effect that I can see. strace -p 4178 also hangs similarly. After it has been started for a while, I start getting messages in dmesg like shown below. It is started like so from another machine: ssh -t root@server /usr/sbin/pppd passive noauth When I do this to one of the machines that work, the remote end's pppd spits out garbage/binary data to the console (as expected). When I do it to the one that fails, I get no output from pppd, but the ssh session eventually times out. If I instead ssh to the machine, and then run /usr/sbin/pppd passive noauth in a separate step I also get the expected binary output. I now have a couple of questions: What could be up with the one machine where pppd fails? I don't even know where to start looking... What could be the difference between ssh -t root@server /usr/sbin/pppd passive noauth in a single step and ssh root@server and /usr/sbin/pppd passive noauth in two steps? How can it be that I can't kill the process even with sudo kill -9? The only way I know is to reboot. (I've tried searching for something similar but didn't get anywhere so I'm sorry I don't have any more leads) Any ideas? The problem machine runs in debian on VMware "hardware" (as do the ones that work) and it exhibits the problem when cloned and on both debian lenny (original) and squeeze (after upgrade) dmesg entries: [ 1198.727248] INFO: task pppd:4178 blocked for more than 120 seconds. [ 1198.727507] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1198.727904] pppd D ece2dc9c 0 4178 4174 0x00000004 [ 1198.727908] 00000098 00000082 f2503520 ece2dc9c 0000b1e7 00000000 c148d1c0 c148d1c0 [ 1198.727913] f2a06100 f6e071c0 00000000 ece2dc18 f5cd07e0 00000000 ece2d400 ece2dc9d [ 1198.727918] 00c52300 ece2dcbc f67bfef8 ec98e480 f291cec0 00000000 c10cf5b0 c10dfd21 [ 1198.727923] Call Trace: [ 1198.727926] [<c10cf5b0>] ? nameidata_to_filp+0x37/0x41 [ 1198.727929] [<c10dfd21>] ? dput+0x21/0xb7 [ 1198.727932] [<c11cfecc>] ? tty_ldisc_ref_wait+0x5f/0x76 [ 1198.727935] [<c104de7a>] ? wake_up_bit+0x5c/0x5c [ 1198.727938] [<c11cb91b>] ? tty_ioctl+0x85f/0x8ba [ 1198.727941] [<c10fec18>] ? do_lock_file_wait+0x3d/0xd9 [ 1198.727944] [<c1162c97>] ? _copy_from_user+0x2b/0x102 [ 1198.727946] [<c11cb0bc>] ? tty_check_change+0xb9/0xb9 [ 1198.727949] [<c10dbeb7>] ? do_vfs_ioctl+0x485/0x4c7 [ 1198.727952] [<c10db59a>] ? do_fcntl+0x24f/0x3a2 [ 1198.727954] [<c10dbf3a>] ? sys_ioctl+0x41/0x58 [ 1198.727957] [<c12c6a1f>] ? sysenter_do_call+0x12/0x28 [ 1318.457225] INFO: task sshd:4174 blocked for more than 120 seconds. [ 1318.457500] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1318.457896] sshd D f25024cc 0 4174 2393 0x00000000 [ 1318.457901] 00000098 00000086 f2a06940 f25024cc 0000b246 00000000 c148d1c0 c148d1c0 [ 1318.457906] f2503520 f6e071c0 00000000 3f056585 0000000f ece2d4bc 3f056585 f2503520 [ 1318.457911] ec98bb38 ec98bbdc 00000000 00000000 00000000 c12c09b5 f2503520 c10327cb [ 1318.457916] Call Trace: [ 1318.457926] [<c12c09b5>] ? schedule_hrtimeout_range_clock+0x3c/0xd9 [ 1318.457931] [<c10327cb>] ? try_to_wake_up+0x13f/0x13f [ 1318.457935] [<c11cfecc>] ? tty_ldisc_ref_wait+0x5f/0x76 [ 1318.457940] [<c104de7a>] ? wake_up_bit+0x5c/0x5c [ 1318.457943] [<c11c9ad3>] ? tty_poll+0x32/0x5e [ 1318.457947] [<c10dd4d5>] ? do_select+0x2a1/0x42e [ 1318.457950] [<c10dcb83>] ? poll_freewait+0x69/0x69 [ 1318.457953] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457955] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457958] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457960] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457963] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457965] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457968] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457971] [<c10429c2>] ? lock_timer_base+0x19/0x35 [ 1318.457974] [<c1042eb5>] ? __mod_timer+0x10c/0x116 [ 1318.457977] [<c1042f89>] ? mod_timer+0x69/0x6e [ 1318.457981] [<c121325d>] ? sk_reset_timer+0xc/0x16 [ 1318.457984] [<c1252f57>] ? tcp_event_new_data_sent+0x66/0x6b [ 1318.457987] [<c1255b85>] ? tcp_write_xmit+0x7a7/0x86a [ 1318.457990] [<c121760d>] ? __alloc_skb+0x50/0xfd [ 1318.457994] [<c12c12bc>] ? _raw_spin_lock_bh+0x8/0x1e [ 1318.457996] [<c1212e98>] ? release_sock+0x10/0xc4 [ 1318.457999] [<c124b543>] ? tcp_sendmsg+0x6dd/0x7b7 [ 1318.458003] [<c1162c97>] ? _copy_from_user+0x2b/0x102 [ 1318.458006] [<c10dd7a0>] ? core_sys_select+0x13e/0x1c3 [ 1318.458009] [<c12102a3>] ? sock_aio_write+0xc0/0xd4 [ 1318.458012] [<c10d0655>] ? do_sync_write+0xa0/0xe4 [ 1318.458016] [<c10b141c>] ? handle_mm_fault+0x222/0x238 [ 1318.458019] [<c10f6096>] ? fsnotify+0x1de/0x1f9 [ 1318.458022] [<c10dd9e8>] ? sys_select+0x6e/0x8f [ 1318.458024] [<c10d105e>] ? sys_write+0x3c/0x63 [ 1318.458028] [<c12c6a1f>] ? sysenter_do_call+0x12/0x28

    Read the article

  • External USB attached drive works in Windows XP but not in Windows 7. How to fix?

    - by irrational John
    Earlier this week I purchased this "N52300 EZQuest Pro" external hard drive enclosure from here. I can connect the enclosure using USB 2.0 and access the files in both NTFS partitions on the MBR partitioned drive when I use either Windows XP (SP3) or Mac OS X 10.6. So it works as expected in XP & Snow Leopard. However, the enclosure does not work in Windows 7 (Home Premium) either 64-bit or 32-bit or in Ubuntu 10.04 (kernel 2.6.32-23-generic). I'm thinking this must be a Windows 7 driver problem because the enclosure works in XP & Snow Leopard. I do know that no special drivers are required to use this enclosure. It is supported using the USB mass storage drivers included with XP and OS X. It should also work fine using the mass storage support in Windows 7, no? FWIW, I have also tried using 32-bit Windows 7 on both my desktop, a Gigabyte GA-965P-DS3 with a Pentium Dual-Core E6500 @ 2.93GHz, and on my early 2008 MacBook. I see the same failure in both cases that I see with 64-bit Windows 7. So it doesn't appear to be specific to one hardware platform. I'm hoping someone out there can help me either get the enclosure to work in Windows 7 or convince me that the enclosure hardware is bad and should be RMAed. At the moment though an RMA seems pointless since this appears to be a (Windows 7) device driver problem. I have tried to track down any updates to the mass storage drivers included with Windows 7 but have so far come up empty. Heck, I can't even figure out how to place a bug report with Microsoft since apparently the grace period for Windows 7 email support is only a few months. I came across a link to some USB troubleshooting steps in another question. I haven't had a chance to look over the suggestions on that site or try them yet. Maybe tomorrow if I have time ... ;-) I'll finish up with some more details about the problem. When I connect the enclosure using USB to Windows 7 at first it appears everything worked. Windows detects the drive and installs a driver for it. Looking in Device Manager there is an entry under the Hard Drives section with the title, Hitachi HDT721010SLA360 USB Device. When you open Windows Disk Management the first time after the enclosure has been attached the drive appears as "Not initialize" and I'm prompted to initialize it. This is bogus. After all, the drive worked fine in XP so I know it has already been initialized, partitioned, and formatted. So of course I never try to initialize it "again". (It's a 1 GB drive and I don't want to lose the data on it). Except for this first time, the drive never shows up in Disk Management again unless I uninstall the Hitachi HDT721010SLA360 USB Device entry under Hard Drives, unplug, and then replug the enclosure. If I do that then the process in the previous paragraph repeats. In Ubuntu the enclosure never shows up at all at the file system level. Below are an excerpt from kern.log and an excerpt from the result of lsusb -v after attaching the enclosure. It appears that Ubuntu at first recongnizes the enclosure and is attempting to attach it, but encounters errors which prevent it from doing so. Unfortunately, I don't know whether any of this info is useful or not. excerpt from kern.log [ 2684.240015] usb 1-2: new high speed USB device using ehci_hcd and address 22 [ 2684.393618] usb 1-2: configuration #1 chosen from 1 choice [ 2684.395399] scsi17 : SCSI emulation for USB Mass Storage devices [ 2684.395570] usb-storage: device found at 22 [ 2684.395572] usb-storage: waiting for device to settle before scanning [ 2689.390412] usb-storage: device scan complete [ 2689.390894] scsi 17:0:0:0: Direct-Access Hitachi HDT721010SLA360 ST6O PQ: 0 ANSI: 4 [ 2689.392237] sd 17:0:0:0: Attached scsi generic sg7 type 0 [ 2689.395269] sd 17:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2689.395632] sd 17:0:0:0: [sde] Write Protect is off [ 2689.395636] sd 17:0:0:0: [sde] Mode Sense: 11 00 00 00 [ 2689.395639] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412003] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412009] sde: sde1 sde2 [ 2689.455759] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.455765] sd 17:0:0:0: [sde] Attached SCSI disk [ 2692.620017] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2707.740014] usb 1-2: device descriptor read/64, error -110 [ 2722.970103] usb 1-2: device descriptor read/64, error -110 [ 2723.200027] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2738.320019] usb 1-2: device descriptor read/64, error -110 [ 2753.550024] usb 1-2: device descriptor read/64, error -110 [ 2753.780020] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2758.810147] usb 1-2: device descriptor read/8, error -110 [ 2763.940142] usb 1-2: device descriptor read/8, error -110 [ 2764.170014] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2769.200141] usb 1-2: device descriptor read/8, error -110 [ 2774.330137] usb 1-2: device descriptor read/8, error -110 [ 2774.440069] usb 1-2: USB disconnect, address 22 [ 2774.440503] sd 17:0:0:0: Device offlined - not ready after error recovery [ 2774.590023] usb 1-2: new high speed USB device using ehci_hcd and address 23 [ 2789.710020] usb 1-2: device descriptor read/64, error -110 [ 2804.940020] usb 1-2: device descriptor read/64, error -110 [ 2805.170026] usb 1-2: new high speed USB device using ehci_hcd and address 24 [ 2820.290019] usb 1-2: device descriptor read/64, error -110 [ 2835.520027] usb 1-2: device descriptor read/64, error -110 [ 2835.750018] usb 1-2: new high speed USB device using ehci_hcd and address 25 [ 2840.780085] usb 1-2: device descriptor read/8, error -110 [ 2845.910079] usb 1-2: device descriptor read/8, error -110 [ 2846.140023] usb 1-2: new high speed USB device using ehci_hcd and address 26 [ 2851.170112] usb 1-2: device descriptor read/8, error -110 [ 2856.300077] usb 1-2: device descriptor read/8, error -110 [ 2856.410027] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 2856.730033] usb 3-2: new full speed USB device using uhci_hcd and address 11 [ 2871.850017] usb 3-2: device descriptor read/64, error -110 [ 2887.080014] usb 3-2: device descriptor read/64, error -110 [ 2887.310011] usb 3-2: new full speed USB device using uhci_hcd and address 12 [ 2902.430021] usb 3-2: device descriptor read/64, error -110 [ 2917.660013] usb 3-2: device descriptor read/64, error -110 [ 2917.890016] usb 3-2: new full speed USB device using uhci_hcd and address 13 [ 2922.911623] usb 3-2: device descriptor read/8, error -110 [ 2928.051753] usb 3-2: device descriptor read/8, error -110 [ 2928.280013] usb 3-2: new full speed USB device using uhci_hcd and address 14 [ 2933.301876] usb 3-2: device descriptor read/8, error -110 [ 2938.431993] usb 3-2: device descriptor read/8, error -110 [ 2938.540073] hub 3-0:1.0: unable to enumerate USB device on port 2 excerpt from lsusb -v Bus 001 Device 017: ID 0dc4:0000 Macpower Peripherals, Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0dc4 Macpower Peripherals, Ltd idProduct 0x0000 bcdDevice 0.01 iManufacturer 1 EZ QUEST iProduct 2 USB Mass Storage iSerial 3 220417 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 5 Config0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 4 Interface0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Update: Results using Firewire to connect. Today I recieved a 1394b 9 pin to 1394a 6 pin cable which allowed me to connect the "EZQuest Pro" via Firewire. Everything works. When I use Firewire I can connect whether I'm using Windows 7 or Ubuntu 10.04. I even tried booting my Gigabyte desktop as an OS X 10.6.3 Hackintosh and it worked there as well. (Though if I recall correctly, it also worked when using USB 2.0 and booting OS X on the desktop. Certainly it works with USB 2.0 and my MacBook.) I believe the firmware on the device is at the latest level available, v1.07. I base this on the excerpt below from the OS X System Profiler which shows Firmware Revision: 0x107. Bottom line: It's nice that the enclosure is actually usable when I connect with Firewire. But I am still searching for an answer as to why it does not work correctly when using USB 2.0 in Windows 7 (and Ubuntu ... but really Windows 7 is my biggest concern). OXFORD IDE Device 1: Manufacturer: EZ QUEST Model: 0x0 GUID: 0x1D202E0220417 Maximum Speed: Up to 800 Mb/sec Connection Speed: Up to 400 Mb/sec Sub-units: OXFORD IDE Device 1 Unit: Unit Software Version: 0x10483 Unit Spec ID: 0x609E Firmware Revision: 0x107 Product Revision Level: ST6O Sub-units: OXFORD IDE Device 1 SBP-LUN: Capacity: 1 TB (1,000,204,886,016 bytes) Removable Media: Yes BSD Name: disk3 Partition Map Type: MBR (Master Boot Record) S.M.A.R.T. status: Not Supported

    Read the article

  • Wireless access point -> Powerline -> Router -> Internet, should this work?

    - by Anthony
    My network at home used to be a laptop and desktop connected wirelessly to a single Wireless ADSL router, a Cisco 877W. Wireless reception around the house with this setup was quite unreliable, so I've gone about looking to improve it. I purchased some Belkin Gigabit powerline adapters and I've got these working fine. I can hook a computer up to one of the powerline adapters, and with the other one plugged into the ADSL router the computer has internet access. Additionally I can hook a Netgear DG834G Wireless ADSL router into it with the adsl not plugged in, and after turning off DHCP can RJ45 a computer up to the network. Everything works fine. However, if I setup a wireless network on the Netgear then any computer that connects wirelessly to it cannot access the internet. It gets an IP address very slowly via DHCP which is a good one, but it cannot access the internet. It can however communicate with the RJ45'd computer also connected to the Netgear. I wondered whether this could be a problem with the Netgear so I've borrowed a Cisco Aironet 1200 and got this working fine when it's attached directly to the primary ADSL router. I can connect to it wireless and get onto the internet. However, if I then plug it into the Netgear I can communicate with other devices attached to the Netgear, but can't get any further than the Netgear. All the while though the other devices RJ45'd to the Netgear are communicating with the internet just fine. I'm starting to suspect it's one of two things causing the problem: 1) For some reason the belkin powerline adapters don't like carrying wireless-originating signals. Could this be possible? 2) The primary Cisco ADSL router doesn't want to communicate with other devices on my network more than one hop away from it. I'm making an assumption here that within the Netgear box the wireless and wired sides are handled differently. Could this be true? Has anyone successfully setup something similar to what I'm trying, with a wireless device on the otherside of a pair of powerline connectors? Update 06/07/2010 - Response to irrational John 28 June Thanks for the answer John - and for clearing up some of my questions. The model number of the belkin powerline adapters are F5D4076. Security was apparently enabled by default on them, and I didn't change them from their default setting. The network diagram in your answer shows exactly what I'm trying to setup: I've followed that guide and I'm still not able to get things working properly. The thing that perplexes me is that wired network traffic works just fine - it's only the wireless traffic that doesn't. This is with the same laptop, and the same DHCP or static IPs. "1. What IP addresses did you assign to each router? What subnet masks are you using?" - subnet is 255.255.255.0, the router connected to the adsl is 192.168.153.1 and that has the DHCP server. The access point on the other side of the powerline adapters I've tried both a static IP of 192.168.153.110, same subnet, and a DHCP-assigned IP. The other devices are DHCP, although I also tried manually entering IP settings. "2. Have you correctly enabled DHCP on only one of the routers and disabled it on all the others?" Yes I have - only the internet-connected router has DHCP enabled. The IP range for the DHCP is from 192.168.153.11 - 192.168.153.200. The strange thing is that wired connections work fine on the LAN, plugged into any router, work fine - it's only the wireless connections that aren't working when they're plugged into the non-primary AP. "Since the routers you are using appear to integrate an ADSL modem I'm assuming there is no WAN port on them." There's no NAT within the LAN, and all wired connections are connected to LAN ports. It's something wrong with the wireless - wired works fine throughout the whole LAN. Update 06/07/2010 - Response to irrational John 29 June The diagram you've drawn in your answer shows pretty much exactly what I'm trying to do. I've spent another evening trying different things and made some progress but I'm still scratching my head. I've borrowed a Netgear access point and been trying with this, and the strange thing is that my PC is working now - this is a Windows 7 PC connected to the access point in the position of where the DG834G is in the diagram. Meanwhile, however, I have an old Powerbook G4 12" I use for music, and while that has a DHCP-assigned IP address, it's not getting any network throughput to either LAN or internet addresses. To make matters more strange, my phone appears to be intermittently working when it's on the wifi. The access point is a Netgear WPN802v1, DHCP, NAT both switched off, running firmware 2.0.9.0. Last night I set it up with exactly the same settings, and similar to tonight I could get a couple of devices to work, and a couple not to. By the morning, however, everything had stopped working - nothing could get a DHCP IP address. I rebooted the 877W earlier this evening and I'm wondering whether this is why a few things are working now. "Could it be possible that the issue could be with the 877W?" I didn't configure this - is it possible that the DHCP server only likes assigning devices that are immediately attached to it? Or similar, could a firewall be stopping too many addresses that are coming through one device? (ie. the Access Point) This could explain why devices are working at the start but then not by the end. In reply to your questions, "1. I looked at the Netgear DG834G support page. There are five versions of this router. Which version do you have? Netgear usually lists this on the label on the bottom of the router. What version of the firmware does it have?" It's a DG834Gv3, and the firmware is the last on the netgear site version 4.01.40. "3. Not knowing which version you have, I glanced at the reference manual for the DG834G v3. In the section for Wireless Settings under the subsection Wireless Access Point there is a check box for a Wireless Isolation setting. If you have this setting it should be off/unchecked. If it is checked then any device connected via wireless would not be able to talk to any other device on the LAN. This sounds like your problem so maybe this is the cause?" I've checked this and it's switched off. I've made a change to the IP of the access point to something outside the DHCP range - it's now 192.158.153.5, with DHCP starting at 11 and going up to 254. Thanks for the tip about this - I only have a few devices so wouldn't anticipate the DHCP server assigning up to 110, but better safe than sorry. Finally one more thing I thought I should add, is with the Powerbook G4 that's not working - it's getting a DHCP IP address and it can communicate with the WPN802 as I can visit the administration page. Anything further than this, however, it can't reach; I can't administrate the 192.168.153.1 (877W router). Strangely, however, when I open Finder on the same powerbook it's detecting my NAS which is attached directly via wire to the 877W. If I try to browse it, it says connection failed. RE: "Perhaps the problem with your Powerbook is with DNS?.." The IP settings on the powerbook are identical to that of the PC with the exception of the IP address; the PC is 192.168.153.17 and the powerbook is 192.168.153.12. Subnets are the same, 255.255.255.0 and default gateway is the same, .1, and the DNS servers are the same. I administrate the 877W by going to 192.168.153.1 in the browser. This is what isn't working from the Powerbook, despite the PC working fine when I do the same. Meanwhile, however, I can administrate the AP on 192.168.153.5 from both PC and Powerbook Update 06/07/2010 - FINAL RESOLUTION of sorts: First off, sorry for the length of this question. I need start to practice a more concise writing style, so I'm going to try to keep this bit brief. After much fiddling, and with the hugely-appreciated help of irrational John, I have come to the conclusion that it's something wrong with the powerbook. I believe that this was perhaps the reason I doubted things worked at the very beginning. I now have the original DG834Gv3 running both wirelessly and wired, and both wired devices and wireless devices get internet connectivity. The only anomaly is the powerbook which I've had to keep wired, as no matter what I do it refuses to work wirelessly. I still have suspicions that the 877W isn't quite right; I'm fairly sure that if I RJ45 the powerline adapter into a different LAN port on it then everything will break. I've just about run out of patience to test this further, and I think I need to go into the 877W's config to match the 877w's lan port's settings. I'm accepting irrational John's answer as he's been enormously helpful, way above the call of duty, and for this line he wrote: Beats the heck out of me. which in the midst of great frustration made me chuckle, and for a sentence in one of his comments to the same answer: If it is specific to the Powerbook I would put that issue aside until after you feel you have the rest of your LAN and the additional WAP all working together correctlyt It was this second sentence that made me put the powerbook aside and concentrate on the other devices that ultimately led me to getting things working.

    Read the article

  • Installing Oracle 11gR2 on RHEL 6.2

    - by Chris
    Hello all I'm having some difficulty installing Oracle 11gR2 on RHEL 6.2 I have compiled a giant list of every single step I have taken so far I installed RHEL 6.2 on VMWARE it did it's easy install automatically I Selected 4gb of memory Selected max size of 80Gb Selected 2 processors Sorry for the bad styling copy paste isn't working correctly The version of oracle i downloaded is Linux x86-64 11.2.0.1 I am installing this on a local machine NOT a remote machine I followed the following documentation http://docs.oracle.com/cd/E11882_01/install.112/e24326/toc.htm I bolded the steps which I was least sure about from my research Easy installed with RHEL 6.2 for VMWARE Registered with red hat so I can get updates Reinstalled vmware-tools by pressing enter at every choice Sudo yum update at the end something about GPG key selected y then y Checked Memory Requirements grep MemTotal /proc/meminfo MemTotal: 3921368 kb uname -m x86_64 grep SwapTotal /proc/meminfo SwapTotal: 6160376 kb free total used free shared buffers cached Mem: 3921368 2032012 1889356 0 76216 1533268 -/+ buffers/cache: 422528 3498840 Swap: 6160376 0 6160376 df -h /dev/shm Filesystem Size Used Avail Use% Mounted on tmpfs 1.9G 276K 1.9G 1% /dev/shm df -h /tmp Filesystem Size Used Avail Use% Mounted on /dev/sda2 73G 2.7G 67G 4% / df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 73G 2.7G 67G 4% / tmpfs 1.9G 276K 1.9G 1% /dev/shm /dev/sda1 291M 58M 219M 21% /boot All looked fine to me except maybe for swap? Software Requirements cat /proc/version Linux version 2.6.32-220.el6.x86_64 ([email protected]) (gcc version 4.4.5 20110214 (Red Hat 4.4.5-6) (GCC) ) #1 SMP Wed Nov 9 08:03:13 EST 2011 uname -r 2.6.32-220.el6.x86_64 (same as above but whatever) According to the tutorial should be On Red Hat Enterprise Linux 6 2.6.32-71.el6.x86_64 or later These are the versions of software I have installed binutils-2.20.51.0.2-5.28.el6.x86_64 compat-libcap1-1.10-1.x86_64 compat-libstdc++-33-3.2.3-69.el6.x86_64 compat-libstdc++-33.i686 0:3.2.3-69.el6 gcc-4.4.6-3.el6.x86_64 gcc-c++.x86_64 0:4.4.6-3.el6 glibc-2.12-1.47.el6_2.12.x86_64 glibc-2.12-1.47.el6_2.12.i686 glibc-devel-2.12-1.47.el6_2.12.x86_64 glibc-devel.i686 0:2.12-1.47.el6_2.12 ksh.x86_64 0:20100621-12.el6_2.1 libgcc-4.4.6-3.el6.x86_64 libgcc-4.4.6-3.el6.i686 libstdc++-4.4.6-3.el6.x86_64 libstdc++.i686 0:4.4.6-3.el6 libstdc++-devel.i686 0:4.4.6-3.el6 libstdc++-devel-4.4.6-3.el6.x86_64 libaio-0.3.107-10.el6.x86_64 libaio-0.3.107-10.el6.i686 libaio-devel-0.3.107-10.el6.x86_64 libaio-devel-0.3.107-10.el6.i686 make-3.81-19.el6.x86_64 sysstat-9.0.4-18.el6.x86_64 unixODBC-2.2.14-11.el6.x86_64 unixODBC-devel-2.2.14-11.el6.x86_64 unixODBC-devel-2.2.14-11.el6.i686 unixODBC-2.2.14-11.el6.i686 8. Probably screwed up here or step 9 /usr/sbin/groupadd oinstall /usr/sbin/groupadd dba(not sure why this isn't in the tutorial) /usr/sbin/useradd -g oinstall -G dba oracle passwd oracle /sbin/sysctl -a | grep sem Xkernel.sem = 250 32000 32 128 /sbin/sysctl -a | grep shm kernel.shmmax = 68719476736 kernel.shmall = 4294967296 kernel.shmmni = 4096 vm.hugetlb_shm_group = 0 /sbin/sysctl -a | grep file-max Xfs.file-max = 384629 /sbin/sysctl -a | grep ip_local_port_range Xnet.ipv4.ip_local_port_range = 32768 61000 /sbin/sysctl -a | grep rmem_default Xnet.core.rmem_default = 124928 /sbin/sysctl -a | grep rmem_max Xnet.core.rmem_max = 131071 /sbin/sysctl -a | grep wmem_max Xnet.core.wmem_max = 131071 /sbin/sysctl -a | grep wmem_default Xnet.core.wmem_default = 124928 Here is my sysctl.conf file I only added the items that were bigger: Kernel sysctl configuration file for Red Hat Linux # For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and sysctl.conf(5) for more details. Controls IP packet forwarding net.ipv4.ip_forward = 0 Controls source route verification net.ipv4.conf.default.rp_filter = 1 Do not accept source routing net.ipv4.conf.default.accept_source_route = 0 Controls the System Request debugging functionality of the kernel kernel.sysrq = 0 Controls whether core dumps will append the PID to the core filename. Useful for debugging multi-threaded applications. kernel.core_uses_pid = 1 Controls the use of TCP syncookies net.ipv4.tcp_syncookies = 1 Disable netfilter on bridges. net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-arptables = 0 Controls the maximum size of a message, in bytes kernel.msgmnb = 65536 Controls the default maxmimum size of a mesage queue kernel.msgmax = 65536 Controls the maximum shared segment size, in bytes kernel.shmmax = 68719476736 Controls the maximum number of shared memory segments, in pages kernel.shmall = 4294967296 fs.aio-max-nr = 1048576 fs.file-max = 6815744 kernel.sem = 250 32000 100 128 net.ipv4.ip_local_port_range = 9000 65500 net.core.rmem_default = 262144 net.core.rmem_max = 4194304 net.core.wmem_default = 262144 net.core.wmem_max = 1048576 /sbin/sysctl -p net.ipv4.ip_forward = 0 net.ipv4.conf.default.rp_filter = 1 net.ipv4.conf.default.accept_source_route = 0 kernel.sysrq = 0 kernel.core_uses_pid = 1 net.ipv4.tcp_syncookies = 1 error: "net.bridge.bridge-nf-call-ip6tables" is an unknown key error: "net.bridge.bridge-nf-call-iptables" is an unknown key error: "net.bridge.bridge-nf-call-arptables" is an unknown key kernel.msgmnb = 65536 kernel.msgmax = 65536 kernel.shmmax = 68719476736 kernel.shmall = 4294967296 fs.aio-max-nr = 1048576 fs.file-max = 6815744 kernel.sem = 250 32000 100 128 net.ipv4.ip_local_port_range = 9000 65500 net.core.rmem_default = 262144 net.core.rmem_max = 4194304 net.core.wmem_default = 262144 net.core.wmem_max = 1048576 su - oracle ulimit -Sn 1024 ulimit -Hn 1024 ulimit -Su 1024 ulimit -Hu 30482 ulimit -Su 1024 ulimit -Ss 10240 ulimit -Hs unlimited su - nano /etc/security/limits.conf *added to the end of the file * oracle soft nproc 2047 oracle hard nproc 16384 oracle soft nofile 1024 oracle hard nofile 65536 oracle soft stack 10240 exit exit su - mkdir -p /app/ chown -R oracle:oinstall /app/ chmod -R 775 /app/ 9. THIS IS PROBABLY WHERE I MESSED UP I then exited out of the root account so now I'm back in my account chris then I su - oracle echo $SHELL /bin/bash umask 0022 (so it should be set already to what is neccesary) Also from what I have read I do not need to set the DISPLAY variable because I'm installing this on the localhost I then opened the .bash_profile of the oracle and changed it to the following .bash_profile Get the aliases and functions if [ -f ~/.bashrc ]; then . ~/.bashrc fi User specific environment and startup programs PATH=$PATH:$HOME/bin; export PATH ORACLE_BASE=/app/oracle ORACLE_SID=orcl export ORACLE_BASE ORACLE_SID I then shutdown the virtual machine shared my desktop folder from my windows 7 then turned back on the virtual machine logged in as chris opened up a terminal then: su - for some reason the shared folder didn't appear so I reinstalled vmware tools again and restarted then same as before su - cp -R linux_oracle/database /db; chown -R oracle:oinstall /db; chmod -R 775 /db; ll /db drwxrwxr-x. 8 oracle oinstall 4096 Jun 5 06:20 database exit su - oracle cd /db/database ./runInstaller AND FINALLY THE INFAMOUS JAVA:132 ERROR MESSAGE Starting Oracle Universal Installer... Checking Temp space: must be greater than 80 MB. Actual 65646 MB Passed Checking swap space: must be greater than 150 MB. Actual 6015 MB Passed Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-05_06-47-12AM. Please wait ...[oracle@localhost database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-06-05_06-47-12AM/jdk/jre/lib/i386/xawt/libmawt.so: libXext.so.6: cannot open shared object file: No such file or directory at java.lang.ClassLoader$NativeLibrary.load(Native Method) at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751) at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1647) at java.lang.Runtime.load0(Runtime.java:769) at java.lang.System.load(System.java:968) at java.lang.ClassLoader$NativeLibrary.load(Native Method) at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751) at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1668) at java.lang.Runtime.loadLibrary0(Runtime.java:822) at java.lang.System.loadLibrary(System.java:993) at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50) at java.security.AccessController.doPrivileged(Native Method) at java.awt.Toolkit.loadLibraries(Toolkit.java:1509) at java.awt.Toolkit.(Toolkit.java:1530) at com.jgoodies.looks.LookUtils.isLowResolution(Unknown Source) at com.jgoodies.looks.LookUtils.(Unknown Source) at com.jgoodies.looks.plastic.PlasticLookAndFeel.(PlasticLookAndFeel.java:122) at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:242) at javax.swing.SwingUtilities.loadSystemClass(SwingUtilities.java:1783) at javax.swing.UIManager.setLookAndFeel(UIManager.java:480) at oracle.install.commons.util.Application.startup(Application.java:758) at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164) at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181) at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265) at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114) at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)

    Read the article

  • Windows Server 2008 R2 network adapter stops working, requires hard reboot

    - by Geoff Dalgas
    TL;DR version: Turns out this was a Windows Server 2008 R2 kernel networking bug. After siccing Microsoft support on it, we (eventually) got an unpublished kernel hotfix from Microsoft to address it. If you, too, are experiencing mysterious low-level network driver failures requiring a reboot/bluescreen cycle, you might want that hotfix (or maybe Service Pack 1 whenever it is released, too.) We have been using HAProxy along with heartbeat from the Linux-HA project. We are using two linux instances to provide a failover. Each server has with their own public IP and a single IP which is shared between the two using a virtual interface (eth1:1) at IP: 69.59.196.211 The virtual interface (eth1:1) IP 69.59.196.211 is configured as the gateway for the windows servers behind them and we use ip_forwarding to route traffic. We are experiencing an occasional network outage on one of our windows servers behind our linux gateways. HAProxy will detect the server is offline which we can verify by remoting to the failed server and attempting to ping the gateway: Pinging 69.59.196.211 with 32 bytes of data: Reply from 69.59.196.220: Destination host unreachable. Running arp -a on this failed server shows that there is no entry for the gateway address (69.59.196.211): Interface: 69.59.196.220 --- 0xa Internet Address Physical Address Type 69.59.196.161 00-26-88-63-c7-80 dynamic 69.59.196.210 00-15-5d-0a-3e-0e dynamic 69.59.196.212 00-21-5e-4d-45-c9 dynamic 69.59.196.213 00-15-5d-00-b2-0d dynamic 69.59.196.215 00-21-5e-4d-61-1a dynamic 69.59.196.217 00-21-5e-4d-2c-e8 dynamic 69.59.196.219 00-21-5e-4d-38-e5 dynamic 69.59.196.221 00-15-5d-00-b2-0d dynamic 69.59.196.222 00-15-5d-0a-3e-09 dynamic 69.59.196.223 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 225.0.0.1 01-00-5e-00-00-01 static On our linux gateway instances arp -a shows: peak-colo-196-220.peak.org (69.59.196.220) at <incomplete> on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-222.peak.org (69.59.196.222) at 00:15:5d:0a:3e:09 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 Why would arp occasionally set the entry for this failed server as <incomplete>? Should we be defining our arp entries statically? I've always left arp alone since it works 99% of the time, but in this one instance it appears to be failing. Are there any additional troubleshooting steps we can take help resolve this issue? THINGS WE HAVE TRIED I added a static arp entry for testing on one of the linux gateways which still didn't help. root@haproxy2:~# arp -a peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-221.peak.org (69.59.196.221) at 00:15:5d:00:b2:0d [ether] on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 peak-colo-196-220.peak.org (69.59.196.220) at 00:21:5e:4d:30:8d [ether] PERM on eth1 root@haproxy2:~# arp -i eth1 -s 69.59.196.220 00:21:5e:4d:30:8d root@haproxy2:~# ping 69.59.196.220 PING 69.59.196.220 (69.59.196.220) 56(84) bytes of data. --- 69.59.196.220 ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 6006ms Rebooting the windows web server solves this issue temporarily with no other changes to the network but our experience shows this issue will come back. Swapping network cards and switches I noticed the link light on the port of the switch for the failed windows server was running at 100Mb instead of 1Gb on the failed interface. I moved the cable to several other open ports and the link indicated 100Mb for each port that I tried. I also swapped the cable with the same result. I tried changing the properties of the network card in windows and the server locked up and required a hard reset after clicking apply. This windows server has two physical network interfaces so I have swapped the cables and network settings on the two interfaces to see if the problem follows the interface. If the public interface goes down again we will know that it is not an issue with the network card. (We also tried another switch we have on hand, no change) Changing network hardware driver versions We've had the same problem with the latest Broadcom driver, as well as the built-in driver that ships in Windows Server 2008 R2. Replacing network cables As a last ditch effort we remembered another change that occurred was the replacement of all of the patch cords between our servers / switch. We had purchased two sets, one green of lengths 1ft - 3ft for the private interfaces and another set of red cables for the public interfaces. We swapped out all of the public interface patch cables with a different brand and ran our servers without issue for a full week ... aaaaaand then the problem recurred. Disable checksum offload, remove TProxy We also tried disabling TCP/IP checksum offload in the driver, no change. We're now pulling out TProxy and moving to a more traditional x-forwarded-for network arrangement without any fancy IP address rewriting. We'll see if that helps. Switch Virtualization providers On the off chance this was related to Hyper-V in some way (we do host Linux VMs on it), we switched to VMWare Server. No change. Switch host model We've reached the end of our troubleshooting rope and are now formally involving Microsoft support. They recommended changing the host model: http://en.wikipedia.org/wiki/Host_model http://technet.microsoft.com/en-us/magazine/2007.09.cableguy.aspx We did that, and.. we'll see.

    Read the article

  • Linux servers going into Halt when pressing Control-D in putty or exit in the shell

    - by Itai Ganot
    Since today at noon, there's a number of Linux CentOS servers which are going to Halt whenever i type exit or use Control-D to close the putty window. Did anyone encounter this weird behavior before? I've checked the aliases list on the servers and there is no alias regarding halt command. After the server came online i've checked the history and saw a "logout" command there but nothing which is related to Halt. At first, i thought it happens only from my computer but later i realized that it happens to everyone which types exit, logout or control+d. 2 of these server are our main iptables firewalls and so it's super critical, your assistance is much appreciated. It looks like that, and it only happens on servers with active IPTables: [root@srv1 bin]# ssh srv2 root@srv2's password: Last login: Sun Nov 11 17:19:41 2012 from 192.168.12.98 [root@srv2 ~]# vim /etc/crontab [root@srv2 ~]# exit logout Broadcast message from root (pts/1) (Tue Nov 13 10:44:04 2012): The system is going down for system halt NOW! Connection to srv2 closed. [root@srv1 bin]# In my troubleshooting steps i came across the command strace, and so i've opened two bash windows to one of the problematic server and i used strace -p PID_of_bash. When i typed in exit in the first shell it did go to halt, attached is the strace output, if you can check it out and tell me if you see anything suspicious i'd be more than thankful. RER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGALRM, {0x4484f0, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM SYS], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTSTP, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTOU, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTIN, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGWINCH, {0x448370, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c410, [], SA_RESTORER|SA_RESTART, 0x2b0e45a8f2f0}, 8) = 0 socket(PF_NETLINK, SOCK_RAW, 9) = 3 sendmsg(3, {msg_name(12)={sa_family=AF_NETLINK, pid=0, groups=00000000}, msg_iov(2)=[{"\25\0\0\0d\4\1\0\0\0\0\0\0\0\0\0", 16}, {"exit\0", 5}], msg_controllen=0, msg_flags=0}, 0) = 21 close(3) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 write(2, "logout\n", 7) = 7 write(2, "There are stopped jobs.\n", 24) = 24 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0 pipe([3, 4]) = 0 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x2b0e45db6fe0) = 23717 setpgid(23717, 23717) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0 close(3) = 0 close(4) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [CHLD], 8) = 0 ioctl(255, TIOCSPGRP, [23717]) = 0 rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0 wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], WSTOPPED|WCONTINUED, NULL) = 23717 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [CHLD], 8) = 0 ioctl(255, TIOCSPGRP, [20458]) = 0 rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0 ioctl(255, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 ioctl(255, TIOCGWINSZ, {ws_row=53, ws_col=211, ws_xpixel=0, ws_ypixel=0}) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- wait4(-1, 0x7fff395da984, WNOHANG|WSTOPPED|WCONTINUED, NULL) = 0 rt_sigreturn(0x11) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [], 8) = 0 ioctl(255, TIOCSPGRP, [20458]) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigprocmask(SIG_BLOCK, [INT], [], 8) = 0 ioctl(0, TIOCGWINSZ, {ws_row=53, ws_col=211, ws_xpixel=0, ws_ypixel=0}) = 0 ioctl(0, TIOCSWINSZ, {ws_row=53, ws_col=211, ws_xpixel=0, ws_ypixel=0}) = 0 ioctl(0, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 ioctl(0, SNDCTL_TMR_STOP or TCSETSW, {B38400 opost isig -icanon -echo ...}) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [INT QUIT ALRM TSTP TTIN TTOU], [], 8) = 0 rt_sigaction(SIGINT, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTERM, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTERM, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGQUIT, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGQUIT, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGALRM, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x4484f0, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM SYS], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTSTP, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTSTP, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTOU, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTOU, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTIN, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTIN, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigaction(SIGWINCH, {0x47c410, [], SA_RESTORER|SA_RESTART, 0x2b0e45a8f2f0}, {0x448370, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 write(2, "[root@g2-lga ~]# ", 17) = 17 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 read(0, "e", 1) = 1 write(2, "e", 1) = 1 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 read(0, "x", 1) = 1 write(2, "x", 1) = 1 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 read(0, "i", 1) = 1 write(2, "i", 1) = 1 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 read(0, "t", 1) = 1 write(2, "t", 1) = 1 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 read(0, "\r", 1) = 1 write(2, "\n", 1) = 1 rt_sigprocmask(SIG_BLOCK, [INT], [], 8) = 0 ioctl(0, SNDCTL_TMR_STOP or TCSETSW, {B38400 opost isig icanon echo ...}) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTERM, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGQUIT, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGALRM, {0x4484f0, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM SYS], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTSTP, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTOU, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTIN, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGWINCH, {0x448370, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c410, [], SA_RESTORER|SA_RESTART, 0x2b0e45a8f2f0}, 8) = 0 socket(PF_NETLINK, SOCK_RAW, 9) = 3 sendmsg(3, {msg_name(12)={sa_family=AF_NETLINK, pid=0, groups=00000000}, msg_iov(2)=[{"\25\0\0\0d\4\1\0\0\0\0\0\0\0\0\0", 16}, {"exit\0", 5}], msg_controllen=0, msg_flags=0}, 0) = 21 close(3) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 write(2, "logout\n", 7) = 7 open("/root/.bash_logout", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=24, ...}) = 0 read(3, "# ~/.bash_logout\n\nclear\n", 24) = 24 close(3) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 stat(".", {st_mode=S_IFDIR|0750, st_size=12288, ...}) = 0 stat("/usr/kerberos/sbin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/usr/kerberos/bin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/usr/local/sbin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/usr/local/bin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/sbin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/bin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/usr/sbin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/usr/bin/clear", {st_mode=S_IFREG|0755, st_size=12712, ...}) = 0 access("/usr/bin/clear", X_OK) = 0 access("/usr/bin/clear", R_OK) = 0 stat("/usr/bin/clear", {st_mode=S_IFREG|0755, st_size=12712, ...}) = 0 access("/usr/bin/clear", X_OK) = 0 access("/usr/bin/clear", R_OK) = 0 rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0 pipe([3, 4]) = 0 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x2b0e45db6fe0) = 23726 setpgid(23726, 23726) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0 close(3) = 0 close(4) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [CHLD], 8) = 0 ioctl(255, TIOCSPGRP, [23726]) = 0 rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0 wait4(-1, Broadcast message from root (pts/0) (Wed Nov 14 12:41:44 2012): The system is going down for system halt NOW! [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], WSTOPPED|WCONTINUED, NULL) = 23726 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [CHLD], 8) = 0 ioctl(255, TIOCSPGRP, [20458]) = 0 rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0 ioctl(255, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 ioctl(255, TIOCGWINSZ, {ws_row=53, ws_col=211, ws_xpixel=0, ws_ypixel=0}) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- wait4(-1, 0x7fff395da634, WNOHANG|WSTOPPED|WCONTINUED, NULL) = 0 rt_sigreturn(0x11) = 0 open("/etc/bash.bash_logout", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 stat("/root/.bash_history", {st_mode=S_IFREG|0600, st_size=28900, ...}) = 0 open("/root/.bash_history", O_WRONLY|O_APPEND) = 3 write(3, "cd /etc/profile.d/\nls\nls -alrt\ng"..., 1120) = 1120 close(3) = 0 open("/root/.bash_history", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0600, st_size=30020, ...}) = 0 read(3, "history \nping g1-lga\nping g1-lga"..., 30020) = 30020 close(3) = 0 open("/root/.bash_history", O_WRONLY|O_TRUNC) = 3 write(3, "grep \"216.18\" *\nhistory \nexit\nvi"..., 27609) = 27609 close(3) = 0 kill(4294965658, SIGTERM) = 0 kill(4294965658, SIGCONT) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- wait4(-1, [{WIFSIGNALED(s) && WTERMSIG(s) == SIGTERM}], WNOHANG|WSTOPPED|WCONTINUED, NULL) = 1638 wait4(-1, 0x7fff395dac34, WNOHANG|WSTOPPED|WCONTINUED, NULL) = -1 ECHILD (No child processes) rt_sigreturn(0x11) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- wait4(-1, 0x7fff395dac34, WNOHANG|WSTOPPED|WCONTINUED, NULL) = -1 ECHILD (No child processes) rt_sigreturn(0xffffffffffffffff) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [], 8) = 0 ioctl(255, TIOCSPGRP, [20458]) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 setpgid(0, 20458) = -1 EPERM (Operation not permitted) exit_group(1) = ? Process 20458 detached [root@g2-lga ~]#

    Read the article

  • JBoss https on port other than 8080 not working

    - by MilindaD
    We have a server with two JBoss instances where one runs on 8080, the other on 8081. We need to have HTTPS enabled for the 8081 server, firstly we tried enabling https on the 8080 port instance by generating the keystore and editing the server.xml and it successfully worked. However when we tried the same thing for 8081 it did not, note that we removed https for the 8080 server first before enabling it for 8081. This is what was used for both server.xml for 8080 and 8081. The only difference was that the port was changed from 8080 to 8081 when trying to enable https for 8081 port instance. What am I doing wrong and what needs to be changed? NOTE : When I meant enabled for 8080 I meant when you visit https:// URL:8484 you will actually be visiting the 8080 port instance. However when ssl is enabled for 8081 and I visit https:// URL:8484 I get that the web page is unavailable. COMMENTLESS VERSION <Server> <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" /> <Listener className="org.apache.catalina.core.JasperListener" /> <Service name="jboss.web"> <!-- https --> <Connector port="8080" address="${jboss.bind.address}" maxThreads="350" maxHttpHeaderSize="8192" emptySessionPath="true" protocol="HTTP/1.1" enableLookups="false" redirectPort="8443" acceptCount="100" connectionTimeout="20000" disableUploadTimeout="true" compression="on" ompressableMimeType="text/html,text/css,text/javascript,application/json,text/xml,text/plain,application/x-javascript,application/javascript"/> <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" address="${jboss.bind.address}" keystoreFile="${jboss.server.home.dir}/conf/supun1.keystore" keystorePass="aaaaaa" truststoreFile="${jboss.server.home.dir}/conf/supun1.keystore" truststorePass="aaaaaa" /> <!-- https1 --> <Connector port="8009" address="${jboss.bind.address}" protocol="AJP/1.3" emptySessionPath="true" enableLookups="false" redirectPort="8443" /> <Engine name="jboss.web" defaultHost="localhost" jvmRoute="khms1"> <Realm className="org.jboss.web.tomcat.security.JBossSecurityMgrRealm" certificatePrincipal="org.jboss.security.auth.certs.SubjectDNMapping" allRolesMode="authOnly" /> <Host name="localhost" autoDeploy="false" deployOnStartup="false" deployXML="false" configClass="org.jboss.web.tomcat.security.config.JBossContextConfig" > <Valve className="org.jboss.web.tomcat.service.sso.ClusteredSingleSignOn" /> <Valve className="org.jboss.web.tomcat.service.jca.CachedConnectionValve" cachedConnectionManagerObjectName="jboss.jca:service=CachedConnectionManager" transactionManagerObjectName="jboss:service=TransactionManager" /> </Host> </Engine> </Service> </Server> WITH COMMENTS VERSION <Server> <!--APR library loader. Documentation at /docs/apr.html --> <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" /> <!--Initialize Jasper prior to webapps are loaded. Documentation at /docs/jasper-howto.html --> <Listener className="org.apache.catalina.core.JasperListener" /> <!-- Use a custom version of StandardService that allows the connectors to be started independent of the normal lifecycle start to allow web apps to be deployed before starting the connectors. --> <Service name="jboss.web"> <!-- A "Connector" represents an endpoint by which requests are received and responses are returned. Documentation at : Java HTTP Connector: /docs/config/http.html (blocking & non-blocking) Java AJP Connector: /docs/config/ajp.html APR (HTTP/AJP) Connector: /docs/apr.html Define a non-SSL HTTP/1.1 Connector on port 8080 --> <Connector port="8080" address="${jboss.bind.address}" maxThreads="350" maxHttpHeaderSize="8192" emptySessionPath="true" protocol="HTTP/1.1" enableLookups="false" redirectPort="8443" acceptCount="100" connectionTimeout="20000" disableUploadTimeout="true" compression="on" ompressableMimeType="text/html,text/css,text/javascript,application/json,text/xml,text/plain,application/x-javascript,application/javascript"/> <!-- Define a SSL HTTP/1.1 Connector on port 8443 This connector uses the JSSE configuration, when using APR, the connector should be using the OpenSSL style configuration described in the APR documentation --> <!-- <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" keystoreFile="${jboss.server.home.dir}/conf/zara.keystore" keystorePass="zara2010" clientAuth="false" sslProtocol="TLS" compression="on" /> --> <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" address="${jboss.bind.address}" keystoreFile="${jboss.server.home.dir}/conf/supun1.keystore" keystorePass="aaaaaa" truststoreFile="${jboss.server.home.dir}/conf/supun1.keystore" truststorePass="aaaaaa" /> <!-- Define an AJP 1.3 Connector on port 8009 --> <Connector port="8009" address="${jboss.bind.address}" protocol="AJP/1.3" emptySessionPath="true" enableLookups="false" redirectPort="8443" /> <Engine name="jboss.web" defaultHost="localhost" jvmRoute="khms1"> <!-- The JAAS based authentication and authorization realm implementation that is compatible with the jboss 3.2.x realm implementation. - certificatePrincipal : the class name of the org.jboss.security.auth.certs.CertificatePrincipal impl used for mapping X509[] cert chains to a Princpal. - allRolesMode : how to handle an auth-constraint with a role-name=*, one of strict, authOnly, strictAuthOnly + strict = Use the strict servlet spec interpretation which requires that the user have one of the web-app/security-role/role-name + authOnly = Allow any authenticated user + strictAuthOnly = Allow any authenticated user only if there are no web-app/security-roles --> <Realm className="org.jboss.web.tomcat.security.JBossSecurityMgrRealm" certificatePrincipal="org.jboss.security.auth.certs.SubjectDNMapping" allRolesMode="authOnly" /> <!-- A subclass of JBossSecurityMgrRealm that uses the authentication behavior of JBossSecurityMgrRealm, but overrides the authorization checks to use JACC permissions with the current java.security.Policy to determine authorized access. - allRolesMode : how to handle an auth-constraint with a role-name=*, one of strict, authOnly, strictAuthOnly + strict = Use the strict servlet spec interpretation which requires that the user have one of the web-app/security-role/role-name + authOnly = Allow any authenticated user + strictAuthOnly = Allow any authenticated user only if there are no web-app/security-roles <Realm className="org.jboss.web.tomcat.security.JaccAuthorizationRealm" certificatePrincipal="org.jboss.security.auth.certs.SubjectDNMapping" allRolesMode="authOnly" /> --> <Host name="localhost" autoDeploy="false" deployOnStartup="false" deployXML="false" configClass="org.jboss.web.tomcat.security.config.JBossContextConfig" > <!-- Uncomment to enable request dumper. This Valve "logs interesting contents from the specified Request (before processing) and the corresponding Response (after processing). It is especially useful in debugging problems related to headers and cookies." --> <!-- <Valve className="org.apache.catalina.valves.RequestDumperValve" /> --> <!-- Access logger --> <!-- <Valve className="org.apache.catalina.valves.AccessLogValve" prefix="localhost_access_log." suffix=".log" pattern="common" directory="${jboss.server.log.dir}" resolveHosts="false" /> --> <!-- Uncomment to enable single sign-on across web apps deployed to this host. Does not provide SSO across a cluster. If this valve is used, do not use the JBoss ClusteredSingleSignOn valve shown below. A new configuration attribute is available beginning with release 4.0.4: cookieDomain configures the domain to which the SSO cookie will be scoped (i.e. the set of hosts to which the cookie will be presented). By default the cookie is scoped to "/", meaning the host that presented it. Set cookieDomain to a wider domain (e.g. "xyz.com") to allow an SSO to span more than one hostname. --> <!-- <Valve className="org.apache.catalina.authenticator.SingleSignOn" /> --> <!-- Uncomment to enable single sign-on across web apps deployed to this host AND to all other hosts in the cluster. If this valve is used, do not use the standard Tomcat SingleSignOn valve shown above. Valve uses a JBossCache instance to support SSO credential caching and replication across the cluster. The JBossCache instance must be configured separately. By default, the valve shares a JBossCache with the service that supports HttpSession replication. See the "jboss-web-cluster-service.xml" file in the server/all/deploy directory for cache configuration details. Besides the attributes supported by the standard Tomcat SingleSignOn valve (see the Tomcat docs), this version also supports the following attributes: cookieDomain see above treeCacheName JMX ObjectName of the JBossCache MBean used to support credential caching and replication across the cluster. If not set, the default value is "jboss.cache:service=TomcatClusteringCache", the standard ObjectName of the JBossCache MBean used to support session replication. --> <Valve className="org.jboss.web.tomcat.service.sso.ClusteredSingleSignOn" /> <!-- Check for unclosed connections and transaction terminated checks in servlets/jsps. Important: The dependency on the CachedConnectionManager in META-INF/jboss-service.xml must be uncommented, too --> <Valve className="org.jboss.web.tomcat.service.jca.CachedConnectionValve" cachedConnectionManagerObjectName="jboss.jca:service=CachedConnectionManager" transactionManagerObjectName="jboss:service=TransactionManager" /> </Host> </Engine> </Service> </Server>

    Read the article

  • network routing between mac & virtual XP

    - by Kevin
    Hi - I have a max laptop running XP inside VirtualBox. The network is setup to be a "Bridged Adapter" so that the IPs for both the host & guest OS's are assigned by my wireless routed. My guest XP has Nortel VPN connecting to corporate lan. When this is connected, I want to allow my host Mac OS to access the corporate network. But I'm struggling. Without Nortel VPN running, I can change routing on the mac so all traffic is sent via the guest XP - this works. But once I activate the VPN, this no longer works. If I try to change the routing on mac to run through the IP address assigned to the Nortel adapter, I get a "Network is unreachable" error. Below is the output from ipconfig /all on the guest XP OS. I'm beginning to believe that what I want to do is not possible because of the way Nortel secure the VPN - but before I give up I thought I'd post the problem here. Thanks, Kevin z:\eclipseworkspace\RESMobileSuite\trunk>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : zzzz-3177b42dd0 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : Yes WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : zzzz.zzz Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : AMD PCNET Family PCI Ethernet Adapter Physical Address. . . . . . . . . : 08-00-XX-XX-XX-XX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.3 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 Lease Obtained. . . . . . . . . . : 30 April 2010 12:22:02 Lease Expires . . . . . . . . . . : 01 May 2010 12:22:02 Ethernet adapter {8EB7A442-9683-45FB-A602-56110A4B3434}: Connection-specific DNS Suffix . : zzzz.zz Description . . . . . . . . . . . : Nortel IPSECSHM Adapter - Packet Scheduler Miniport Physical Address. . . . . . . . . : 44-45-YY-YY-YY-YY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : XXX.4.52.62 Subnet Mask . . . . . . . . . . . : 255.255.254.0 Default Gateway . . . . . . . . . : XXX.4.52.62 DNS Servers . . . . . . . . . . . : XXX.6.21.36 XXX.6.21.100

    Read the article

  • Autounattend.xml not being recognized in VirtualBox

    - by beagle
    I am working my way through the steps on this page to prepare an unattended installation of Windows 7 Enterprise x64 for purposes of a college assignment which simply requires the process to be carried out and documented. Both the "technician" and "reference" computers are virtual machines created in VirtualBox 4.3.12, as will be the destination computer. I seem to have successfully completed Step 1, building an Autounattend.xml answer file using Windows System Image Manager, in as far as the answer file validates successfully. The problem arises when I try to install Windows on the reference machine from the DVD image in conjunction with the Autounattend file on a USB drive. I have tried a couple of different USB devices, and the devices themselves seem to be recognized, but the answer file does not, as instead of taking the configuration settings from the file the user interface appears as in a manual installation. Has anyone come across this problem or a solution? The xml created by Windows SIM is below for reference in case the problem is with the file itself. <?xml version="1.0" encoding="utf-8"?> <unattend xmlns="urn:schemas-microsoft-com:unattend"> <settings pass="oobeSystem"> <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <Reseal> <Mode>Audit</Mode> </Reseal> </component> <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <OOBE> <HideEULAPage>true</HideEULAPage> <ProtectYourPC>3</ProtectYourPC> </OOBE> </component> </settings> <settings pass="windowsPE"> <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <SetupUILanguage> <UILanguage>en-IE</UILanguage> </SetupUILanguage> <InputLocale>en-IE</InputLocale> <SystemLocale>en-IE</SystemLocale> <UILanguage>en-IE</UILanguage> <UserLocale>en-IE</UserLocale> </component> <component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <DiskConfiguration> <Disk wcm:action="add"> <CreatePartitions> <CreatePartition wcm:action="add"> <Order>1</Order> <Size>300</Size> <Type>Primary</Type> </CreatePartition> <CreatePartition wcm:action="add"> <Order>2</Order> <Extend>true</Extend> <Type>Primary</Type> </CreatePartition> </CreatePartitions> <ModifyPartitions> <ModifyPartition wcm:action="add"> <Active>true</Active> <Format>NTFS</Format> <Label>System</Label> <Order>1</Order> <PartitionID>1</PartitionID> </ModifyPartition> <ModifyPartition wcm:action="add"> <Format>NTFS</Format> <Label>Windows</Label> <Order>2</Order> <PartitionID>2</PartitionID> </ModifyPartition> </ModifyPartitions> <DiskID>0</DiskID> <WillWipeDisk>true</WillWipeDisk> </Disk> <WillShowUI>OnError</WillShowUI> </DiskConfiguration> <ImageInstall> <OSImage> <InstallTo> <DiskID>0</DiskID> <PartitionID>2</PartitionID> </InstallTo> <InstallToAvailablePartition>false</InstallToAvailablePartition> <WillShowUI>OnError</WillShowUI> </OSImage> </ImageInstall> <UserData> <ProductKey> <WillShowUI>OnError</WillShowUI> </ProductKey> <AcceptEula>true</AcceptEula> </UserData> </component> </settings> <settings pass="specialize"> <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <Home_Page>http://www.example.com</Home_Page> </component> </settings> <cpi:offlineImage cpi:source="wim://technician/users/user/desktop/install.wim#Windows 7 ENTERPRISE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />

    Read the article

  • Integrating JavaScript Unit Tests with Visual Studio

    - by Stephen Walther
    Modern ASP.NET web applications take full advantage of client-side JavaScript to provide better interactivity and responsiveness. If you are building an ASP.NET application in the right way, you quickly end up with lots and lots of JavaScript code. When writing server code, you should be writing unit tests. One big advantage of unit tests is that they provide you with a safety net that enable you to safely modify your existing code – for example, fix bugs, add new features, and make performance enhancements -- without breaking your existing code. Every time you modify your code, you can execute your unit tests to verify that you have not broken anything. For the same reason that you should write unit tests for your server code, you should write unit tests for your client code. JavaScript is just as susceptible to bugs as C#. There is no shortage of unit testing frameworks for JavaScript. Each of the major JavaScript libraries has its own unit testing framework. For example, jQuery has QUnit, Prototype has UnitTestJS, YUI has YUI Test, and Dojo has Dojo Objective Harness (DOH). The challenge is integrating a JavaScript unit testing framework with Visual Studio. Visual Studio and Visual Studio ALM provide fantastic support for server-side unit tests. You can easily view the results of running your unit tests in the Visual Studio Test Results window. You can set up a check-in policy which requires that all unit tests pass before your source code can be committed to the source code repository. In addition, you can set up Team Build to execute your unit tests automatically. Unfortunately, Visual Studio does not provide “out-of-the-box” support for JavaScript unit tests. MS Test, the unit testing framework included in Visual Studio, does not support JavaScript unit tests. As soon as you leave the server world, you are left on your own. The goal of this blog entry is to describe one approach to integrating JavaScript unit tests with MS Test so that you can execute your JavaScript unit tests side-by-side with your C# unit tests. The goal is to enable you to execute JavaScript unit tests in exactly the same way as server-side unit tests. You can download the source code described by this project by scrolling to the end of this blog entry. Rejected Approach: Browser Launchers One popular approach to executing JavaScript unit tests is to use a browser as a test-driver. When you use a browser as a test-driver, you open up a browser window to execute and view the results of executing your JavaScript unit tests. For example, QUnit – the unit testing framework for jQuery – takes this approach. The following HTML page illustrates how you can use QUnit to create a unit test for a function named addNumbers(). <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <title>Using QUnit</title> <link rel="stylesheet" href="http://github.com/jquery/qunit/raw/master/qunit/qunit.css" type="text/css" /> </head> <body> <h1 id="qunit-header">QUnit example</h1> <h2 id="qunit-banner"></h2> <div id="qunit-testrunner-toolbar"></div> <h2 id="qunit-userAgent"></h2> <ol id="qunit-tests"></ol> <div id="qunit-fixture">test markup, will be hidden</div> <script type="text/javascript" src="http://code.jquery.com/jquery-latest.js"></script> <script type="text/javascript" src="http://github.com/jquery/qunit/raw/master/qunit/qunit.js"></script> <script type="text/javascript"> // The function to test function addNumbers(a, b) { return a+b; } // The unit test test("Test of addNumbers", function () { equals(4, addNumbers(1,3), "1+3 should be 4"); }); </script> </body> </html> This test verifies that calling addNumbers(1,3) returns the expected value 4. When you open this page in a browser, you can see that this test does, in fact, pass. The idea is that you can quickly refresh this QUnit HTML JavaScript test driver page in your browser whenever you modify your JavaScript code. In other words, you can keep a browser window open and keep refreshing it over and over while you are developing your application. That way, you can know very quickly whenever you have broken your JavaScript code. While easy to setup, there are several big disadvantages to this approach to executing JavaScript unit tests: You must view your JavaScript unit test results in a different location than your server unit test results. The JavaScript unit test results appear in the browser and the server unit test results appear in the Visual Studio Test Results window. Because all of your unit test results don’t appear in a single location, you are more likely to introduce bugs into your code without noticing it. Because your unit tests are not integrated with Visual Studio – in particular, MS Test -- you cannot easily include your JavaScript unit tests when setting up check-in policies or when performing automated builds with Team Build. A more sophisticated approach to using a browser as a test-driver is to automate the web browser. Instead of launching the browser and loading the test code yourself, you use a framework to automate this process. There are several different testing frameworks that support this approach: · Selenium – Selenium is a very powerful framework for automating browser tests. You can create your tests by recording a Firefox session or by writing the test driver code in server code such as C#. You can learn more about Selenium at http://seleniumhq.org/. LTAF – The ASP.NET team uses the Lightweight Test Automation Framework to test JavaScript code in the ASP.NET framework. You can learn more about LTAF by visiting the project home at CodePlex: http://aspnet.codeplex.com/releases/view/35501 jsTestDriver – This framework uses Java to automate the browser. jsTestDriver creates a server which can be used to automate multiple browsers simultaneously. This project is located at http://code.google.com/p/js-test-driver/ TestSwam – This framework, created by John Resig, uses PHP to automate the browser. Like jsTestDriver, the framework creates a test server. You can open multiple browsers that are automated by the test server. Learn more about TestSwarm by visiting the following address: https://github.com/jeresig/testswarm/wiki Yeti – This is the framework introduced by Yahoo for automating browser tests. Yeti uses server-side JavaScript and depends on Node.js. Learn more about Yeti at http://www.yuiblog.com/blog/2010/08/25/introducing-yeti-the-yui-easy-testing-interface/ All of these frameworks are great for integration tests – however, they are not the best frameworks to use for unit tests. In one way or another, all of these frameworks depend on executing tests within the context of a “living and breathing” browser. If you create an ASP.NET Unit Test then Visual Studio will launch a web server before executing the unit test. Why is launching a web server so bad? It is not the worst thing in the world. However, it does introduce dependencies that prevent your code from being tested in isolation. One of the defining features of a unit test -- versus an integration test – is that a unit test tests code in isolation. Another problem with launching a web server when performing unit tests is that launching a web server can be slow. If you cannot execute your unit tests quickly, you are less likely to execute your unit tests each and every time you make a code change. You are much more likely to fall into the pit of failure. Launching a browser when performing a JavaScript unit test has all of the same disadvantages as launching a web server when performing an ASP.NET unit test. Instead of testing a unit of JavaScript code in isolation, you are testing JavaScript code within the context of a particular browser. Using the frameworks listed above for integration tests makes perfect sense. However, I want to consider a different approach for creating unit tests for JavaScript code. Using Server-Side JavaScript for JavaScript Unit Tests A completely different approach to executing JavaScript unit tests is to perform the tests outside of any browser. If you really want to test JavaScript then you should test JavaScript and leave the browser out of the testing process. There are several ways that you can execute JavaScript on the server outside the context of any browser: Rhino – Rhino is an implementation of JavaScript written in Java. The Rhino project is maintained by the Mozilla project. Learn more about Rhino at http://www.mozilla.org/rhino/ V8 – V8 is the open-source Google JavaScript engine written in C++. This is the JavaScript engine used by the Chrome web browser. You can download V8 and embed it in your project by visiting http://code.google.com/p/v8/ JScript – JScript is the JavaScript Script Engine used by Internet Explorer (up to but not including Internet Explorer 9), Windows Script Host, and Active Server Pages. Internet Explorer is still the most popular web browser. Therefore, I decided to focus on using the JScript Script Engine to execute JavaScript unit tests. Using the Microsoft Script Control There are two basic ways that you can pass JavaScript to the JScript Script Engine and execute the code: use the Microsoft Windows Script Interfaces or use the Microsoft Script Control. The difficult and proper way to execute JavaScript using the JScript Script Engine is to use the Microsoft Windows Script Interfaces. You can learn more about the Script Interfaces by visiting http://msdn.microsoft.com/en-us/library/t9d4xf28(VS.85).aspx The main disadvantage of using the Script Interfaces is that they are difficult to use from .NET. There is a great series of articles on using the Script Interfaces from C# located at http://www.drdobbs.com/184406028. I picked the easier alternative and used the Microsoft Script Control. The Microsoft Script Control is an ActiveX control that provides a higher level abstraction over the Window Script Interfaces. You can download the Microsoft Script Control from here: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=d7e31492-2595-49e6-8c02-1426fec693ac After you download the Microsoft Script Control, you need to add a reference to it to your project. Select the Visual Studio menu option Project, Add Reference to open the Add Reference dialog. Select the COM tab and add the Microsoft Script Control 1.0. Using the Script Control is easy. You call the Script Control AddCode() method to add JavaScript code to the Script Engine. Next, you call the Script Control Run() method to run a particular JavaScript function. The reference documentation for the Microsoft Script Control is located at the MSDN website: http://msdn.microsoft.com/en-us/library/aa227633%28v=vs.60%29.aspx Creating the JavaScript Code to Test To keep things simple, let’s imagine that you want to test the following JavaScript function named addNumbers() which simply adds two numbers together: MvcApplication1\Scripts\Math.js function addNumbers(a, b) { return 5; } Notice that the addNumbers() method always returns the value 5. Right-now, it will not pass a good unit test. Create this file and save it in your project with the name Math.js in your MVC project’s Scripts folder (Save the file in your actual MVC application and not your MVC test application). Creating the JavaScript Test Helper Class To make it easier to use the Microsoft Script Control in unit tests, we can create a helper class. This class contains two methods: LoadFile() – Loads a JavaScript file. Use this method to load the JavaScript file being tested or the JavaScript file containing the unit tests. ExecuteTest() – Executes the JavaScript code. Use this method to execute a JavaScript unit test. Here’s the code for the JavaScriptTestHelper class: JavaScriptTestHelper.cs   using System; using System.IO; using Microsoft.VisualStudio.TestTools.UnitTesting; using MSScriptControl; namespace MvcApplication1.Tests { public class JavaScriptTestHelper : IDisposable { private ScriptControl _sc; private TestContext _context; /// <summary> /// You need to use this helper with Unit Tests and not /// Basic Unit Tests because you need a Test Context /// </summary> /// <param name="testContext">Unit Test Test Context</param> public JavaScriptTestHelper(TestContext testContext) { if (testContext == null) { throw new ArgumentNullException("TestContext"); } _context = testContext; _sc = new ScriptControl(); _sc.Language = "JScript"; _sc.AllowUI = false; } /// <summary> /// Load the contents of a JavaScript file into the /// Script Engine. /// </summary> /// <param name="path">Path to JavaScript file</param> public void LoadFile(string path) { var fileContents = File.ReadAllText(path); _sc.AddCode(fileContents); } /// <summary> /// Pass the path of the test that you want to execute. /// </summary> /// <param name="testMethodName">JavaScript function name</param> public void ExecuteTest(string testMethodName) { dynamic result = null; try { result = _sc.Run(testMethodName, new object[] { }); } catch { var error = ((IScriptControl)_sc).Error; if (error != null) { var description = error.Description; var line = error.Line; var column = error.Column; var text = error.Text; var source = error.Source; if (_context != null) { var details = String.Format("{0} \r\nLine: {1} Column: {2}", source, line, column); _context.WriteLine(details); } } throw new AssertFailedException(error.Description); } } public void Dispose() { _sc = null; } } }     Notice that the JavaScriptTestHelper class requires a Test Context to be instantiated. For this reason, you can use the JavaScriptTestHelper only with a Visual Studio Unit Test and not a Basic Unit Test (These are two different types of Visual Studio project items). Add the JavaScriptTestHelper file to your MVC test application (for example, MvcApplication1.Tests). Creating the JavaScript Unit Test Next, we need to create the JavaScript unit test function that we will use to test the addNumbers() function. Create a folder in your MVC test project named JavaScriptTests and add the following JavaScript file to this folder: MvcApplication1.Tests\JavaScriptTests\MathTest.js /// <reference path="JavaScriptUnitTestFramework.js"/> function testAddNumbers() { // Act var result = addNumbers(1, 3); // Assert assert.areEqual(4, result, "addNumbers did not return right value!"); }   The testAddNumbers() function takes advantage of another JavaScript library named JavaScriptUnitTestFramework.js. This library contains all of the code necessary to make assertions. Add the following JavaScriptnitTestFramework.js to the same folder as the MathTest.js file: MvcApplication1.Tests\JavaScriptTests\JavaScriptUnitTestFramework.js var assert = { areEqual: function (expected, actual, message) { if (expected !== actual) { throw new Error("Expected value " + expected + " is not equal to " + actual + ". " + message); } } }; There is only one type of assertion supported by this file: the areEqual() assertion. Most likely, you would want to add additional types of assertions to this file to make it easier to write your JavaScript unit tests. Deploying the JavaScript Test Files This step is non-intuitive. When you use Visual Studio to run unit tests, Visual Studio creates a new folder and executes a copy of the files in your project. After you run your unit tests, your Visual Studio Solution will contain a new folder named TestResults that includes a subfolder for each test run. You need to configure Visual Studio to deploy your JavaScript files to the test run folder or Visual Studio won’t be able to find your JavaScript files when you execute your unit tests. You will get an error that looks something like this when you attempt to execute your unit tests: You can configure Visual Studio to deploy your JavaScript files by adding a Test Settings file to your Visual Studio Solution. It is important to understand that you need to add this file to your Visual Studio Solution and not a particular Visual Studio project. Right-click your Solution in the Solution Explorer window and select the menu option Add, New Item. Select the Test Settings item and click the Add button. After you create a Test Settings file for your solution, you can indicate that you want a particular folder to be deployed whenever you perform a test run. Select the menu option Test, Edit Test Settings to edit your test configuration file. Select the Deployment tab and select your MVC test project’s JavaScriptTest folder to deploy. Click the Apply button and the Close button to save the changes and close the dialog. Creating the Visual Studio Unit Test The very last step is to create the Visual Studio unit test (the MS Test unit test). Add a new unit test to your MVC test project by selecting the menu option Add New Item and selecting the Unit Test project item (Do not select the Basic Unit Test project item): The difference between a Basic Unit Test and a Unit Test is that a Unit Test includes a Test Context. We need this Test Context to use the JavaScriptTestHelper class that we created earlier. Enter the following test method for the new unit test: [TestMethod] public void TestAddNumbers() { var jsHelper = new JavaScriptTestHelper(this.TestContext); // Load JavaScript files jsHelper.LoadFile("JavaScriptUnitTestFramework.js"); jsHelper.LoadFile(@"..\..\..\MvcApplication1\Scripts\Math.js"); jsHelper.LoadFile("MathTest.js"); // Execute JavaScript Test jsHelper.ExecuteTest("testAddNumbers"); } This code uses the JavaScriptTestHelper to load three files: JavaScripUnitTestFramework.js – Contains the assert functions. Math.js – Contains the addNumbers() function from your MVC application which is being tested. MathTest.js – Contains the JavaScript unit test function. Next, the test method calls the JavaScriptTestHelper ExecuteTest() method to execute the testAddNumbers() JavaScript function. Running the Visual Studio JavaScript Unit Test After you complete all of the steps described above, you can execute the JavaScript unit test just like any other unit test. You can use the keyboard combination CTRL-R, CTRL-A to run all of the tests in the current Visual Studio Solution. Alternatively, you can use the buttons in the Visual Studio toolbar to run the tests: (Unfortunately, the Run All Impacted Tests button won’t work correctly because Visual Studio won’t detect that your JavaScript code has changed. Therefore, you should use either the Run Tests in Current Context or Run All Tests in Solution options instead.) The results of running the JavaScript tests appear side-by-side with the results of running the server tests in the Test Results window. For example, if you Run All Tests in Solution then you will get the following results: Notice that the TestAddNumbers() JavaScript test has failed. That is good because our addNumbers() function is hard-coded to always return the value 5. If you double-click the failing JavaScript test, you can view additional details such as the JavaScript error message and the line number of the JavaScript code that failed: Summary The goal of this blog entry was to explain an approach to creating JavaScript unit tests that can be easily integrated with Visual Studio and Visual Studio ALM. I described how you can use the Microsoft Script Control to execute JavaScript on the server. By taking advantage of the Microsoft Script Control, we were able to execute our JavaScript unit tests side-by-side with all of our other unit tests and view the results in the standard Visual Studio Test Results window. You can download the code discussed in this blog entry from here: http://StephenWalther.com/downloads/Blog/JavaScriptUnitTesting/JavaScriptUnitTests.zip Before running this code, you need to first install the Microsoft Script Control which you can download from here: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=d7e31492-2595-49e6-8c02-1426fec693ac

    Read the article

  • Using FiddlerCore to capture HTTP Requests with .NET

    - by Rick Strahl
    Over the last few weeks I’ve been working on my Web load testing utility West Wind WebSurge. One of the key components of a load testing tool is the ability to capture URLs effectively so that you can play them back later under load. One of the options in WebSurge for capturing URLs is to use its built-in capture tool which acts as an HTTP proxy to capture any HTTP and HTTPS traffic from most Windows HTTP clients, including Web Browsers as well as standalone Windows applications and services. To make this happen, I used Eric Lawrence’s awesome FiddlerCore library, which provides most of the functionality of his desktop Fiddler application, all rolled into an easy to use library that you can plug into your own applications. FiddlerCore makes it almost too easy to capture HTTP content! For WebSurge I needed to capture all HTTP traffic in order to capture the full HTTP request – URL, headers and any content posted by the client. The result of what I ended up creating is this semi-generic capture form: In this post I’m going to demonstrate how easy it is to use FiddlerCore to build this HTTP Capture Form.  If you want to jump right in here are the links to get Telerik’s Fiddler Core and the code for the demo provided here. FiddlerCore Download FiddlerCore on NuGet Show me the Code (WebSurge Integration code from GitHub) Download the WinForms Sample Form West Wind Web Surge (example implementation in live app) Note that FiddlerCore is bound by a license for commercial usage – see license.txt in the FiddlerCore distribution for details. Integrating FiddlerCore FiddlerCore is a library that simply plugs into your application. You can download it from the Telerik site and manually add the assemblies to your project, or you can simply install the NuGet package via:       PM> Install-Package FiddlerCore The library consists of the FiddlerCore.dll as well as a couple of support libraries (CertMaker.dll and BCMakeCert.dll) that are used for installing SSL certificates. I’ll have more on SSL captures and certificate installation later in this post. But first let’s see how easy it is to use FiddlerCore to capture HTTP content by looking at how to build the above capture form. Capturing HTTP Content Once the library is installed it’s super easy to hook up Fiddler functionality. Fiddler includes a number of static class methods on the FiddlerApplication object that can be called to hook up callback events as well as actual start monitoring HTTP URLs. In the following code directly lifted from WebSurge, I configure a few filter options on Form level object, from the user inputs shown on the form by assigning it to a capture options object. In the live application these settings are persisted configuration values, but in the demo they are one time values initialized and set on the form. Once these options are set, I hook up the AfterSessionComplete event to capture every URL that passes through the proxy after the request is completed and start up the Proxy service:void Start() { if (tbIgnoreResources.Checked) CaptureConfiguration.IgnoreResources = true; else CaptureConfiguration.IgnoreResources = false; string strProcId = txtProcessId.Text; if (strProcId.Contains('-')) strProcId = strProcId.Substring(strProcId.IndexOf('-') + 1).Trim(); strProcId = strProcId.Trim(); int procId = 0; if (!string.IsNullOrEmpty(strProcId)) { if (!int.TryParse(strProcId, out procId)) procId = 0; } CaptureConfiguration.ProcessId = procId; CaptureConfiguration.CaptureDomain = txtCaptureDomain.Text; FiddlerApplication.AfterSessionComplete += FiddlerApplication_AfterSessionComplete; FiddlerApplication.Startup(8888, true, true, true); } The key lines for FiddlerCore are just the last two lines of code that include the event hookup code as well as the Startup() method call. Here I only hook up to the AfterSessionComplete event but there are a number of other events that hook various stages of the HTTP request cycle you can also hook into. Other events include BeforeRequest, BeforeResponse, RequestHeadersAvailable, ResponseHeadersAvailable and so on. In my case I want to capture the request data and I actually have several options to capture this data. AfterSessionComplete is the last event that fires in the request sequence and it’s the most common choice to capture all request and response data. I could have used several other events, but AfterSessionComplete is one place where you can look both at the request and response data, so this will be the most common place to hook into if you’re capturing content. The implementation of AfterSessionComplete is responsible for capturing all HTTP request headers and it looks something like this:private void FiddlerApplication_AfterSessionComplete(Session sess) { // Ignore HTTPS connect requests if (sess.RequestMethod == "CONNECT") return; if (CaptureConfiguration.ProcessId > 0) { if (sess.LocalProcessID != 0 && sess.LocalProcessID != CaptureConfiguration.ProcessId) return; } if (!string.IsNullOrEmpty(CaptureConfiguration.CaptureDomain)) { if (sess.hostname.ToLower() != CaptureConfiguration.CaptureDomain.Trim().ToLower()) return; } if (CaptureConfiguration.IgnoreResources) { string url = sess.fullUrl.ToLower(); var extensions = CaptureConfiguration.ExtensionFilterExclusions; foreach (var ext in extensions) { if (url.Contains(ext)) return; } var filters = CaptureConfiguration.UrlFilterExclusions; foreach (var urlFilter in filters) { if (url.Contains(urlFilter)) return; } } if (sess == null || sess.oRequest == null || sess.oRequest.headers == null) return; string headers = sess.oRequest.headers.ToString(); var reqBody = sess.GetRequestBodyAsString(); // if you wanted to capture the response //string respHeaders = session.oResponse.headers.ToString(); //var respBody = session.GetResponseBodyAsString(); // replace the HTTP line to inject full URL string firstLine = sess.RequestMethod + " " + sess.fullUrl + " " + sess.oRequest.headers.HTTPVersion; int at = headers.IndexOf("\r\n"); if (at < 0) return; headers = firstLine + "\r\n" + headers.Substring(at + 1); string output = headers + "\r\n" + (!string.IsNullOrEmpty(reqBody) ? reqBody + "\r\n" : string.Empty) + Separator + "\r\n\r\n"; BeginInvoke(new Action<string>((text) => { txtCapture.AppendText(text); UpdateButtonStatus(); }), output); } The code starts by filtering out some requests based on the CaptureOptions I set before the capture is started. These options/filters are applied when requests actually come in. This is very useful to help narrow down the requests that are captured for playback based on options the user picked. I find it useful to limit requests to a certain domain for captures, as well as filtering out some request types like static resources – images, css, scripts etc. This is of course optional, but I think it’s a common scenario and WebSurge makes good use of this feature. AfterSessionComplete like other FiddlerCore events, provides a Session object parameter which contains all the request and response details. There are oRequest and oResponse objects to hold their respective data. In my case I’m interested in the raw request headers and body only, as you can see in the commented code you can also retrieve the response headers and body. Here the code captures the request headers and body and simply appends the output to the textbox on the screen. Note that the Fiddler events are asynchronous, so in order to display the content in the UI they have to be marshaled back the UI thread with BeginInvoke, which here simply takes the generated headers and appends it to the existing textbox test on the form. As each request is processed, the headers are captured and appended to the bottom of the textbox resulting in a Session HTTP capture in the format that Web Surge internally supports, which is basically raw request headers with a customized 1st HTTP Header line that includes the full URL rather than a server relative URL. When the capture is done the user can either copy the raw HTTP session to the clipboard, or directly save it to file. This raw capture format is the same format WebSurge and also Fiddler use to import/export request data. While this code is application specific, it demonstrates the kind of logic that you can easily apply to the request capture process, which is one of the reasonsof why FiddlerCore is so powerful. You get to choose what content you want to look up as part of your own application logic and you can then decide how to capture or use that data as part of your application. The actual captured data in this case is only a string. The user can edit the data by hand or in the the case of WebSurge, save it to disk and automatically open the captured session as a new load test. Stopping the FiddlerCore Proxy Finally to stop capturing requests you simply disconnect the event handler and call the FiddlerApplication.ShutDown() method:void Stop() { FiddlerApplication.AfterSessionComplete -= FiddlerApplication_AfterSessionComplete; if (FiddlerApplication.IsStarted()) FiddlerApplication.Shutdown(); } As you can see, adding HTTP capture functionality to an application is very straight forward. FiddlerCore offers tons of features I’m not even touching on here – I suspect basic captures are the most common scenario, but a lot of different things can be done with FiddlerCore’s simple API interface. Sky’s the limit! The source code for this sample capture form (WinForms) is provided as part of this article. Adding Fiddler Certificates with FiddlerCore One of the sticking points in West Wind WebSurge has been that if you wanted to capture HTTPS/SSL traffic, you needed to have the full version of Fiddler and have HTTPS decryption enabled. Essentially you had to use Fiddler to configure HTTPS decryption and the associated installation of the Fiddler local client certificate that is used for local decryption of incoming SSL traffic. While this works just fine, requiring to have Fiddler installed and then using a separate application to configure the SSL functionality isn’t ideal. Fortunately FiddlerCore actually includes the tools to register the Fiddler Certificate directly using FiddlerCore. Why does Fiddler need a Certificate in the first Place? Fiddler and FiddlerCore are essentially HTTP proxies which means they inject themselves into the HTTP conversation by re-routing HTTP traffic to a special HTTP port (8888 by default for Fiddler) and then forward the HTTP data to the original client. Fiddler injects itself as the system proxy in using the WinInet Windows settings  which are the same settings that Internet Explorer uses and that are configured in the Windows and Internet Explorer Internet Settings dialog. Most HTTP clients running on Windows pick up and apply these system level Proxy settings before establishing new HTTP connections and that’s why most clients automatically work once Fiddler – or FiddlerCore/WebSurge are running. For plain HTTP requests this just works – Fiddler intercepts the HTTP requests on the proxy port and then forwards them to the original port (80 for HTTP and 443 for SSL typically but it could be any port). For SSL however, this is not quite as simple – Fiddler can easily act as an HTTPS/SSL client to capture inbound requests from the server, but when it forwards the request to the client it has to also act as an SSL server and provide a certificate that the client trusts. This won’t be the original certificate from the remote site, but rather a custom local certificate that effectively simulates an SSL connection between the proxy and the client. If there is no custom certificate configured for Fiddler the SSL request fails with a certificate validation error. The key for this to work is that a custom certificate has to be installed that the HTTPS client trusts on the local machine. For a much more detailed description of the process you can check out Eric Lawrence’s blog post on Certificates. If you’re using the desktop version of Fiddler you can install a local certificate into the Windows certificate store. Fiddler proper does this from the Options menu: This operation does several things: It installs the Fiddler Root Certificate It sets trust to this Root Certificate A new client certificate is generated for each HTTPS site monitored Certificate Installation with FiddlerCore You can also provide this same functionality using FiddlerCore which includes a CertMaker class. Using CertMaker is straight forward to use and it provides an easy way to create some simple helpers that can install and uninstall a Fiddler Root certificate:public static bool InstallCertificate() { if (!CertMaker.rootCertExists()) { if (!CertMaker.createRootCert()) return false; if (!CertMaker.trustRootCert()) return false; } return true; } public static bool UninstallCertificate() { if (CertMaker.rootCertExists()) { if (!CertMaker.removeFiddlerGeneratedCerts(true)) return false; } return true; } InstallCertificate() works by first checking whether the root certificate is already installed and if it isn’t goes ahead and creates a new one. The process of creating the certificate is a two step process – first the actual certificate is created and then it’s moved into the certificate store to become trusted. I’m not sure why you’d ever split these operations up since a cert created without trust isn’t going to be of much value, but there are two distinct steps. When you trigger the trustRootCert() method, a message box will pop up on the desktop that lets you know that you’re about to trust a local private certificate. This is a security feature to ensure that you really want to trust the Fiddler root since you are essentially installing a man in the middle certificate. It’s quite safe to use this generated root certificate, because it’s been specifically generated for your machine and thus is not usable from external sources, the only way to use this certificate in a trusted way is from the local machine. IOW, unless somebody has physical access to your machine, there’s no useful way to hijack this certificate and use it for nefarious purposes (see Eric’s post for more details). Once the Root certificate has been installed, FiddlerCore/Fiddler create new certificates for each site that is connected to with HTTPS. You can end up with quite a few temporary certificates in your certificate store. To uninstall you can either use Fiddler and simply uncheck the Decrypt HTTPS traffic option followed by the remove Fiddler certificates button, or you can use FiddlerCore’s CertMaker.removeFiddlerGeneratedCerts() which removes the root cert and any of the intermediary certificates Fiddler created. Keep in mind that when you uninstall you uninstall the certificate for both FiddlerCore and Fiddler, so use UninstallCertificate() with care and realize that you might affect the Fiddler application’s operation by doing so as well. When to check for an installed Certificate Note that the check to see if the root certificate exists is pretty fast, while the actual process of installing the certificate is a relatively slow operation that even on a fast machine takes a few seconds. Further the trust operation pops up a message box so you probably don’t want to install the certificate repeatedly. Since the check for the root certificate is fast, you can easily put a call to InstallCertificate() in any capture startup code – in which case the certificate installation only triggers when a certificate is in fact not installed. Personally I like to make certificate installation explicit – just like Fiddler does, so in WebSurge I use a small drop down option on the menu to install or uninstall the SSL certificate:   This code calls the InstallCertificate and UnInstallCertificate functions respectively – the experience with this is similar to what you get in Fiddler with the extra dialog box popping up to prompt confirmation for installation of the root certificate. Once the cert is installed you can then capture SSL requests. There’s a gotcha however… Gotcha: FiddlerCore Certificates don’t stick by Default When I originally tried to use the Fiddler certificate installation I ran into an odd problem. I was able to install the certificate and immediately after installation was able to capture HTTPS requests. Then I would exit the application and come back in and try the same HTTPS capture again and it would fail due to a missing certificate. CertMaker.rootCertExists() would return false after every restart and if re-installed the certificate a new certificate would get added to the certificate store resulting in a bunch of duplicated root certificates with different keys. What the heck? CertMaker and BcMakeCert create non-sticky CertificatesI turns out that FiddlerCore by default uses different components from what the full version of Fiddler uses. Fiddler uses a Windows utility called MakeCert.exe to create the Fiddler Root certificate. FiddlerCore however installs the CertMaker.dll and BCMakeCert.dll assemblies, which use a different crypto library (Bouncy Castle) for certificate creation than MakeCert.exe which uses the Windows Crypto API. The assemblies provide support for non-windows operation for Fiddler under Mono, as well as support for some non-Windows certificate platforms like iOS and Android for decryption. The bottom line is that the FiddlerCore provided bouncy castle assemblies are not sticky by default as the certificates created with them are not cached as they are in Fiddler proper. To get certificates to ‘stick’ you have to explicitly cache the certificates in Fiddler’s internal preferences. A cache aware version of InstallCertificate looks something like this:public static bool InstallCertificate() { if (!CertMaker.rootCertExists()) { if (!CertMaker.createRootCert()) return false; if (!CertMaker.trustRootCert()) return false; App.Configuration.UrlCapture.Cert = FiddlerApplication.Prefs.GetStringPref("fiddler.certmaker.bc.cert", null); App.Configuration.UrlCapture.Key = FiddlerApplication.Prefs.GetStringPref("fiddler.certmaker.bc.key", null); } return true; } public static bool UninstallCertificate() { if (CertMaker.rootCertExists()) { if (!CertMaker.removeFiddlerGeneratedCerts(true)) return false; } App.Configuration.UrlCapture.Cert = null; App.Configuration.UrlCapture.Key = null; return true; } In this code I store the Fiddler cert and private key in an application configuration settings that’s stored with the application settings (App.Configuration.UrlCapture object). These settings automatically persist when WebSurge is shut down. The values are read out of Fiddler’s internal preferences store which is set after a new certificate has been created. Likewise I clear out the configuration settings when the certificate is uninstalled. In order for these setting to be used you have to also load the configuration settings into the Fiddler preferences *before* a call to rootCertExists() is made. I do this in the capture form’s constructor:public FiddlerCapture(StressTestForm form) { InitializeComponent(); CaptureConfiguration = App.Configuration.UrlCapture; MainForm = form; if (!string.IsNullOrEmpty(App.Configuration.UrlCapture.Cert)) { FiddlerApplication.Prefs.SetStringPref("fiddler.certmaker.bc.key", App.Configuration.UrlCapture.Key); FiddlerApplication.Prefs.SetStringPref("fiddler.certmaker.bc.cert", App.Configuration.UrlCapture.Cert); }} This is kind of a drag to do and not documented anywhere that I could find, so hopefully this will save you some grief if you want to work with the stock certificate logic that installs with FiddlerCore. MakeCert provides sticky Certificates and the same functionality as Fiddler But there’s actually an easier way. If you want to skip the above Fiddler preference configuration code in your application you can choose to distribute MakeCert.exe instead of certmaker.dll and bcmakecert.dll. When you use MakeCert.exe, the certificates settings are stored in Windows so they are available without any custom configuration inside of your application. It’s easier to integrate and as long as you run on Windows and you don’t need to support iOS or Android devices is simply easier to deal with. To integrate into your project, you can remove the reference to CertMaker.dll (and the BcMakeCert.dll assembly) from your project. Instead copy MakeCert.exe into your output folder. To make sure MakeCert.exe gets pushed out, include MakeCert.exe in your project and set the Build Action to None, and Copy to Output Directory to Copy if newer. Note that the CertMaker.dll reference in the project has been removed and on disk the files for Certmaker.dll, as well as the BCMakeCert.dll files on disk. Keep in mind that these DLLs are resources of the FiddlerCore NuGet package, so updating the package may end up pushing those files back into your project. Once MakeCert.exe is distributed FiddlerCore checks for it first before using the assemblies so as long as MakeCert.exe exists it’ll be used for certificate creation (at least on Windows). Summary FiddlerCore is a pretty sweet tool, and it’s absolutely awesome that we get to plug in most of the functionality of Fiddler right into our own applications. A few years back I tried to build this sort of functionality myself for an app and ended up giving up because it’s a big job to get HTTP right – especially if you need to support SSL. FiddlerCore now provides that functionality as a turnkey solution that can be plugged into your own apps easily. The only downside is FiddlerCore’s documentation for more advanced features like certificate installation which is pretty sketchy. While for the most part FiddlerCore’s feature set is easy to work with without any documentation, advanced features are often not intuitive to gleam by just using Intellisense or the FiddlerCore help file reference (which is not terribly useful). While Eric Lawrence is very responsive on his forum and on Twitter, there simply isn’t much useful documentation on Fiddler/FiddlerCore available online. If you run into trouble the forum is probably the first place to look and then ask a question if you can’t find the answer. The best documentation you can find is Eric’s Fiddler Book which covers a ton of functionality of Fiddler and FiddlerCore. The book is a great reference to Fiddler’s feature set as well as providing great insights into the HTTP protocol. The second half of the book that gets into the innards of HTTP is an excellent read for anybody who wants to know more about some of the more arcane aspects and special behaviors of HTTP – it’s well worth the read. While the book has tons of information in a very readable format, it’s unfortunately not a great reference as it’s hard to find things in the book and because it’s not available online you can’t electronically search for the great content in it. But it’s hard to complain about any of this given the obvious effort and love that’s gone into this awesome product for all of these years. A mighty big thanks to Eric Lawrence  for having created this useful tool that so many of us use all the time, and also to Telerik for picking up Fiddler/FiddlerCore and providing Eric the resources to support and improve this wonderful tool full time and keeping it free for all. Kudos! Resources FiddlerCore Download FiddlerCore NuGet Fiddler Capture Sample Form Fiddler Capture Form in West Wind WebSurge (GitHub) Eric Lawrence’s Fiddler Book© Rick Strahl, West Wind Technologies, 2005-2014Posted in .NET  HTTP   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • SimpleMembership, Membership Providers, Universal Providers and the new ASP.NET 4.5 Web Forms and ASP.NET MVC 4 templates

    - by Jon Galloway
    The ASP.NET MVC 4 Internet template adds some new, very useful features which are built on top of SimpleMembership. These changes add some great features, like a much simpler and extensible membership API and support for OAuth. However, the new account management features require SimpleMembership and won't work against existing ASP.NET Membership Providers. I'll start with a summary of top things you need to know, then dig into a lot more detail. Summary: SimpleMembership has been designed as a replacement for traditional the previous ASP.NET Role and Membership provider system SimpleMembership solves common problems people ran into with the Membership provider system and was designed for modern user / membership / storage needs SimpleMembership integrates with the previous membership system, but you can't use a MembershipProvider with SimpleMembership The new ASP.NET MVC 4 Internet application template AccountController requires SimpleMembership and is not compatible with previous MembershipProviders You can continue to use existing ASP.NET Role and Membership providers in ASP.NET 4.5 and ASP.NET MVC 4 - just not with the ASP.NET MVC 4 AccountController The existing ASP.NET Role and Membership provider system remains supported as is part of the ASP.NET core ASP.NET 4.5 Web Forms does not use SimpleMembership; it implements OAuth on top of ASP.NET Membership The ASP.NET Web Site Administration Tool (WSAT) is not compatible with SimpleMembership The following is the result of a few conversations with Erik Porter (PM for ASP.NET MVC) to make sure I had some the overall details straight, combined with a lot of time digging around in ILSpy and Visual Studio's assembly browsing tools. SimpleMembership: The future of membership for ASP.NET The ASP.NET Membership system was introduces with ASP.NET 2.0 back in 2005. It was designed to solve common site membership requirements at the time, which generally involved username / password based registration and profile storage in SQL Server. It was designed with a few extensibility mechanisms - notably a provider system (which allowed you override some specifics like backing storage) and the ability to store additional profile information (although the additional  profile information was packed into a single column which usually required access through the API). While it's sometimes frustrating to work with, it's held up for seven years - probably since it handles the main use case (username / password based membership in a SQL Server database) smoothly and can be adapted to most other needs (again, often frustrating, but it can work). The ASP.NET Web Pages and WebMatrix efforts allowed the team an opportunity to take a new look at a lot of things - e.g. the Razor syntax started with ASP.NET Web Pages, not ASP.NET MVC. The ASP.NET Web Pages team designed SimpleMembership to (wait for it) simplify the task of dealing with membership. As Matthew Osborn said in his post Using SimpleMembership With ASP.NET WebPages: With the introduction of ASP.NET WebPages and the WebMatrix stack our team has really be focusing on making things simpler for the developer. Based on a lot of customer feedback one of the areas that we wanted to improve was the built in security in ASP.NET. So with this release we took that time to create a new built in (and default for ASP.NET WebPages) security provider. I say provider because the new stuff is still built on the existing ASP.NET framework. So what do we call this new hotness that we have created? Well, none other than SimpleMembership. SimpleMembership is an umbrella term for both SimpleMembership and SimpleRoles. Part of simplifying membership involved fixing some common problems with ASP.NET Membership. Problems with ASP.NET Membership ASP.NET Membership was very obviously designed around a set of assumptions: Users and user information would most likely be stored in a full SQL Server database or in Active Directory User and profile information would be optimized around a set of common attributes (UserName, Password, IsApproved, CreationDate, Comment, Role membership...) and other user profile information would be accessed through a profile provider Some problems fall out of these assumptions. Requires Full SQL Server for default cases The default, and most fully featured providers ASP.NET Membership providers (SQL Membership Provider, SQL Role Provider, SQL Profile Provider) require full SQL Server. They depend on stored procedure support, and they rely on SQL Server cache dependencies, they depend on agents for clean up and maintenance. So the main SQL Server based providers don't work well on SQL Server CE, won't work out of the box on SQL Azure, etc. Note: Cory Fowler recently let me know about these Updated ASP.net scripts for use with Microsoft SQL Azure which do support membership, personalization, profile, and roles. But the fact that we need a support page with a set of separate SQL scripts underscores the underlying problem. Aha, you say! Jon's forgetting the Universal Providers, a.k.a. System.Web.Providers! Hold on a bit, we'll get to those... Custom Membership Providers have to work with a SQL-Server-centric API If you want to work with another database or other membership storage system, you need to to inherit from the provider base classes and override a bunch of methods which are tightly focused on storing a MembershipUser in a relational database. It can be done (and you can often find pretty good ones that have already been written), but it's a good amount of work and often leaves you with ugly code that has a bunch of System.NotImplementedException fun since there are a lot of methods that just don't apply. Designed around a specific view of users, roles and profiles The existing providers are focused on traditional membership - a user has a username and a password, some specific roles on the site (e.g. administrator, premium user), and may have some additional "nice to have" optional information that can be accessed via an API in your application. This doesn't fit well with some modern usage patterns: In OAuth and OpenID, the user doesn't have a password Often these kinds of scenarios map better to user claims or rights instead of monolithic user roles For many sites, profile or other non-traditional information is very important and needs to come from somewhere other than an API call that maps to a database blob What would work a lot better here is a system in which you were able to define your users, rights, and other attributes however you wanted and the membership system worked with your model - not the other way around. Requires specific schema, overflow in blob columns I've already mentioned this a few times, but it bears calling out separately - ASP.NET Membership focuses on SQL Server storage, and that storage is based on a very specific database schema. SimpleMembership as a better membership system As you might have guessed, SimpleMembership was designed to address the above problems. Works with your Schema As Matthew Osborn explains in his Using SimpleMembership With ASP.NET WebPages post, SimpleMembership is designed to integrate with your database schema: All SimpleMembership requires is that there are two columns on your users table so that we can hook up to it – an “ID” column and a “username” column. The important part here is that they can be named whatever you want. For instance username doesn't have to be an alias it could be an email column you just have to tell SimpleMembership to treat that as the “username” used to log in. Matthew's example shows using a very simple user table named Users (it could be named anything) with a UserID and Username column, then a bunch of other columns he wanted in his app. Then we point SimpleMemberhip at that table with a one-liner: WebSecurity.InitializeDatabaseFile("SecurityDemo.sdf", "Users", "UserID", "Username", true); No other tables are needed, the table can be named anything we want, and can have pretty much any schema we want as long as we've got an ID and something that we can map to a username. Broaden database support to the whole SQL Server family While SimpleMembership is not database agnostic, it works across the SQL Server family. It continues to support full SQL Server, but it also works with SQL Azure, SQL Server CE, SQL Server Express, and LocalDB. Everything's implemented as SQL calls rather than requiring stored procedures, views, agents, and change notifications. Note that SimpleMembership still requires some flavor of SQL Server - it won't work with MySQL, NoSQL databases, etc. You can take a look at the code in WebMatrix.WebData.dll using a tool like ILSpy if you'd like to see why - there places where SQL Server specific SQL statements are being executed, especially when creating and initializing tables. It seems like you might be able to work with another database if you created the tables separately, but I haven't tried it and it's not supported at this point. Note: I'm thinking it would be possible for SimpleMembership (or something compatible) to run Entity Framework so it would work with any database EF supports. That seems useful to me - thoughts? Note: SimpleMembership has the same database support - anything in the SQL Server family - that Universal Providers brings to the ASP.NET Membership system. Easy to with Entity Framework Code First The problem with with ASP.NET Membership's system for storing additional account information is that it's the gate keeper. That means you're stuck with its schema and accessing profile information through its API. SimpleMembership flips that around by allowing you to use any table as a user store. That means you're in control of the user profile information, and you can access it however you'd like - it's just data. Let's look at a practical based on the AccountModel.cs class in an ASP.NET MVC 4 Internet project. Here I'm adding a Birthday property to the UserProfile class. [Table("UserProfile")] public class UserProfile { [Key] [DatabaseGeneratedAttribute(DatabaseGeneratedOption.Identity)] public int UserId { get; set; } public string UserName { get; set; } public DateTime Birthday { get; set; } } Now if I want to access that information, I can just grab the account by username and read the value. var context = new UsersContext(); var username = User.Identity.Name; var user = context.UserProfiles.SingleOrDefault(u => u.UserName == username); var birthday = user.Birthday; So instead of thinking of SimpleMembership as a big membership API, think of it as something that handles membership based on your user database. In SimpleMembership, everything's keyed off a user row in a table you define rather than a bunch of entries in membership tables that were out of your control. How SimpleMembership integrates with ASP.NET Membership Okay, enough sales pitch (and hopefully background) on why things have changed. How does this affect you? Let's start with a diagram to show the relationship (note: I've simplified by removing a few classes to show the important relationships): So SimpleMembershipProvider is an implementaiton of an ExtendedMembershipProvider, which inherits from MembershipProvider and adds some other account / OAuth related things. Here's what ExtendedMembershipProvider adds to MembershipProvider: The important thing to take away here is that a SimpleMembershipProvider is a MembershipProvider, but a MembershipProvider is not a SimpleMembershipProvider. This distinction is important in practice: you cannot use an existing MembershipProvider (including the Universal Providers found in System.Web.Providers) with an API that requires a SimpleMembershipProvider, including any of the calls in WebMatrix.WebData.WebSecurity or Microsoft.Web.WebPages.OAuth.OAuthWebSecurity. However, that's as far as it goes. Membership Providers still work if you're accessing them through the standard Membership API, and all of the core stuff  - including the AuthorizeAttribute, role enforcement, etc. - will work just fine and without any change. Let's look at how that affects you in terms of the new templates. Membership in the ASP.NET MVC 4 project templates ASP.NET MVC 4 offers six Project Templates: Empty - Really empty, just the assemblies, folder structure and a tiny bit of basic configuration. Basic - Like Empty, but with a bit of UI preconfigured (css / images / bundling). Internet - This has both a Home and Account controller and associated views. The Account Controller supports registration and login via either local accounts and via OAuth / OpenID providers. Intranet - Like the Internet template, but it's preconfigured for Windows Authentication. Mobile - This is preconfigured using jQuery Mobile and is intended for mobile-only sites. Web API - This is preconfigured for a service backend built on ASP.NET Web API. Out of these templates, only one (the Internet template) uses SimpleMembership. ASP.NET MVC 4 Basic template The Basic template has configuration in place to use ASP.NET Membership with the Universal Providers. You can see that configuration in the ASP.NET MVC 4 Basic template's web.config: <profile defaultProvider="DefaultProfileProvider"> <providers> <add name="DefaultProfileProvider" type="System.Web.Providers.DefaultProfileProvider, System.Web.Providers, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" connectionStringName="DefaultConnection" applicationName="/" /> </providers> </profile> <membership defaultProvider="DefaultMembershipProvider"> <providers> <add name="DefaultMembershipProvider" type="System.Web.Providers.DefaultMembershipProvider, System.Web.Providers, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" connectionStringName="DefaultConnection" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="false" requiresUniqueEmail="false" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="6" minRequiredNonalphanumericCharacters="0" passwordAttemptWindow="10" applicationName="/" /> </providers> </membership> <roleManager defaultProvider="DefaultRoleProvider"> <providers> <add name="DefaultRoleProvider" type="System.Web.Providers.DefaultRoleProvider, System.Web.Providers, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" connectionStringName="DefaultConnection" applicationName="/" /> </providers> </roleManager> <sessionState mode="InProc" customProvider="DefaultSessionProvider"> <providers> <add name="DefaultSessionProvider" type="System.Web.Providers.DefaultSessionStateProvider, System.Web.Providers, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" connectionStringName="DefaultConnection" /> </providers> </sessionState> This means that it's business as usual for the Basic template as far as ASP.NET Membership works. ASP.NET MVC 4 Internet template The Internet template has a few things set up to bootstrap SimpleMembership: \Models\AccountModels.cs defines a basic user account and includes data annotations to define keys and such \Filters\InitializeSimpleMembershipAttribute.cs creates the membership database using the above model, then calls WebSecurity.InitializeDatabaseConnection which verifies that the underlying tables are in place and marks initialization as complete (for the application's lifetime) \Controllers\AccountController.cs makes heavy use of OAuthWebSecurity (for OAuth account registration / login / management) and WebSecurity. WebSecurity provides account management services for ASP.NET MVC (and Web Pages) WebSecurity can work with any ExtendedMembershipProvider. There's one in the box (SimpleMembershipProvider) but you can write your own. Since a standard MembershipProvider is not an ExtendedMembershipProvider, WebSecurity will throw exceptions if the default membership provider is a MembershipProvider rather than an ExtendedMembershipProvider. Practical example: Create a new ASP.NET MVC 4 application using the Internet application template Install the Microsoft ASP.NET Universal Providers for LocalDB NuGet package Run the application, click on Register, add a username and password, and click submit You'll get the following execption in AccountController.cs::Register: To call this method, the "Membership.Provider" property must be an instance of "ExtendedMembershipProvider". This occurs because the ASP.NET Universal Providers packages include a web.config transform that will update your web.config to add the Universal Provider configuration I showed in the Basic template example above. When WebSecurity tries to use the configured ASP.NET Membership Provider, it checks if it can be cast to an ExtendedMembershipProvider before doing anything else. So, what do you do? Options: If you want to use the new AccountController, you'll either need to use the SimpleMembershipProvider or another valid ExtendedMembershipProvider. This is pretty straightforward. If you want to use an existing ASP.NET Membership Provider in ASP.NET MVC 4, you can't use the new AccountController. You can do a few things: Replace  the AccountController.cs and AccountModels.cs in an ASP.NET MVC 4 Internet project with one from an ASP.NET MVC 3 application (you of course won't have OAuth support). Then, if you want, you can go through and remove other things that were built around SimpleMembership - the OAuth partial view, the NuGet packages (e.g. the DotNetOpenAuthAuth package, etc.) Use an ASP.NET MVC 4 Internet application template and add in a Universal Providers NuGet package. Then copy in the AccountController and AccountModel classes. Create an ASP.NET MVC 3 project and upgrade it to ASP.NET MVC 4 using the steps shown in the ASP.NET MVC 4 release notes. None of these are particularly elegant or simple. Maybe we (or just me?) can do something to make this simpler - perhaps a NuGet package. However, this should be an edge case - hopefully the cases where you'd need to create a new ASP.NET but use legacy ASP.NET Membership Providers should be pretty rare. Please let me (or, preferably the team) know if that's an incorrect assumption. Membership in the ASP.NET 4.5 project template ASP.NET 4.5 Web Forms took a different approach which builds off ASP.NET Membership. Instead of using the WebMatrix security assemblies, Web Forms uses Microsoft.AspNet.Membership.OpenAuth assembly. I'm no expert on this, but from a bit of time in ILSpy and Visual Studio's (very pretty) dependency graphs, this uses a Membership Adapter to save OAuth data into an EF managed database while still running on top of ASP.NET Membership. Note: There may be a way to use this in ASP.NET MVC 4, although it would probably take some plumbing work to hook it up. How does this fit in with Universal Providers (System.Web.Providers)? Just to summarize: Universal Providers are intended for cases where you have an existing ASP.NET Membership Provider and you want to use it with another SQL Server database backend (other than SQL Server). It doesn't require agents to handle expired session cleanup and other background tasks, it piggybacks these tasks on other calls. Universal Providers are not really, strictly speaking, universal - at least to my way of thinking. They only work with databases in the SQL Server family. Universal Providers do not work with Simple Membership. The Universal Providers packages include some web config transforms which you would normally want when you're using them. What about the Web Site Administration Tool? Visual Studio includes tooling to launch the Web Site Administration Tool (WSAT) to configure users and roles in your application. WSAT is built to work with ASP.NET Membership, and is not compatible with Simple Membership. There are two main options there: Use the WebSecurity and OAuthWebSecurity API to manage the users and roles Create a web admin using the above APIs Since SimpleMembership runs on top of your database, you can update your users as you would any other data - via EF or even in direct database edits (in development, of course)

    Read the article

  • E-Business Suite Technology Sessions at OpenWorld 2012

    - by Max Arderius
    Oracle OpenWorld 2012 is almost here! We're looking forward to updating you on our products, strategy, and roadmaps. This year, the E-Business Suite Applications Technology Group (ATG) will participate in 25 speaker sessions, two Meet the Experts round-table discussions, five demoground booths and seven Special Interest Group meetings as guest speakers. We hope to see you at our sessions.  Please join us to hear the latest news and connect with senior ATG development staff. Here's a downloadable listing of all Applications Technology Group-related sessions with times and locations: FOCUS ON Oracle E-Business Suite - Applications Tools and Technology (PDF) General Sessions GEN8474 - Oracle E-Business Suite - Strategy, Update, and RoadmapCliff Godwin, SVP, Oracle Monday, Oct 1, 12:15 PM - 1:15 PM - Moscone West 2002/2004 In this session, hear Oracle E-Business Suite General Manager Cliff Godwin deliver an update on the Oracle E-Business Suite product line. This session covers the value delivered by the current release of Oracle E-Business Suite, the momentum, and how Oracle E-Business Suite applications integrate into Oracle’s overall applications strategy. You’ll come away with an understanding of the value Oracle E-Business Suite applications deliver now and will deliver in the future. GEN9173 - Optimize and Extend Oracle Applications - The Path to Oracle Fusion ApplicationsNadia Bendjedou, Oracle; Corre Curtice, Bhavish Madurai (CSC) Tuesday, Oct 2, 10:15 AM - 11:15 AM - Moscone West 3002/3004 One of the main objectives of this session is to help organizations build their IT roadmap for the next five years and be aligned with the Oracle Applications strategy in general and the Oracle Fusion Applications strategy in particular. Come hear about some of the common sense, practical steps you can take to optimize the performance of your Oracle Applications today and prepare your path to Oracle Fusion Applications for when your organization is ready to embrace them. Each step you take in adopting Oracle Fusion technology gets you partway to Oracle Fusion Applications. Conference Sessions CON9024 - Oracle E-Business Suite Technology: Latest Features and Roadmap Lisa Parekh, Oracle Monday, Oct 1, 10:45 AM - 11:45 AM - Moscone West 2016 This Oracle development session provides a comprehensive overview of Oracle’s product strategy for Oracle E-Business Suite technology, the capabilities and associated business benefits of recent releases, and a review of capabilities on the product roadmap. This is the cornerstone session for the Oracle E-Business Suite technology stack. Come hear about the latest new usability enhancements of the user interface; systems administration and configuration management tools; security-related updates; and tools and options for extending, customizing, and integrating Oracle E-Business Suite with other applications. CON9021 - Oracle E-Business Suite Future Directions: Deployment and System AdministrationMax Arderius, Oracle Monday, Oct 1, 3:15 PM - 4:15 PM - Moscone West 2016  What’s coming in the next major version of Oracle E-Business Suite 12? This Oracle Development session covers the latest technology stack, including the use of Oracle WebLogic Server (Oracle Fusion Middleware 11g) and Oracle Database 11g Release 2 (11.2). Topics include an architectural overview of the latest updates, installation and upgrade options, new configuration options, and new tools for hot cloning and automated “lights-out” cloning. Come learn how online patching (based on the Oracle Database 11g Release 2 Edition-Based Redefinition feature) will reduce your database patching downtimes to however long it takes to bounce your database server. CON9017 - Desktop Integration in Oracle E-Business Suite 12.1 Padmaprabodh Ambale, Gustavo Jimenez, Oracle Monday, Oct 1, 4:45 PM - 5:45 PM - Moscone West 2016 This presentation covers the latest functional enhancements in Oracle Web Applications Desktop Integrator and Oracle Report Manager, enhanced Microsoft Office support, and greater support for building custom desktop integration solutions. The session also presents tips and tricks for upgrading from Oracle Applications Desktop Integrator to Oracle Web Applications Desktop Integrator and Oracle Report Manager. CON9023 - Oracle E-Business Suite Technology Certification Primer and Roadmap Steven Chan, Oracle Tuesday, Oct 2, 10:15 AM - 11:15 AM - Moscone West 2016  Is your Oracle E-Business Suite technology stack up to date? Are you taking advantage of all the latest options and capabilities? This Oracle development session summarizes the latest certifications and roadmap for the Oracle E-Business Suite technology stack, including elements such as database releases and options, Java, Oracle Forms, Oracle Containers for J2EE, desktop operating systems, browsers, JRE releases, development and Web authoring tools, user authentication and management, business intelligence, Oracle Application Management Packs, security options, clouds, Oracle VM, and virtualization. The session also covers the most commonly asked questions about tech stack component support dates and upgrade implications. CON9028 - Minimizing Oracle E-Business Suite Maintenance DowntimesSantiago Bastidas, Elke Phelps, Oracle Tuesday, Oct 2, 11:45 AM - 12:45 PM - Moscone West 2016 This Oracle development session features a survey of the best techniques sysadmins can use to minimize patching downtimes. It starts with an architectural-level review of Oracle E-Business Suite fundamentals and then moves to a practical view of the various tools and approaches for downtimes. Topics include patching shortcuts, merging patches, distributing worker processes across multiple servers, running ADPatch in noninteractive mode, staged APPL_TOPs, shared file systems, deferring systemwide database tasks, avoiding resource bottlenecks, and more. An added bonus: hear about the upcoming Oracle E-Business Suite 12 online patching capabilities based on the groundbreaking Oracle Database 11g Release 2 Edition-Based Redefinition feature. CON9116 - Extending the Use of Oracle E-Business Suite with the Oracle Endeca PlatformOsama Elkady, Muhannad Obeidat, Oracle Tuesday, Oct 2, 11:45 AM - 12:45 PM - Moscone West 2018 The Oracle Endeca platform includes a leading unstructured data correlation and analytics engine, together with a best-in class catalog search and guided navigation solution, to improve the productivity of all types of users in your enterprise. This development session focuses on the details behind the Oracle Endeca platform’s integration into Oracle E-Business Suite. It demonstrates how easily you can extend the use of the Oracle Endeca platform into other areas of Oracle E-Business Suite and how you can bring in your own data and build new Oracle Endeca applications for Oracle E-Business Suite. CON9005 - Oracle E-Business Suite Integration Best PracticesVeshaal Singh, Oracle, Jeffrey Hand, Zebra Technologies Tuesday, Oct 2, 1:15 PM - 2:15 PM - Moscone West 2018 Oracle is investing across applications and technologies to make the application integration experience easier for customers. Today Oracle has certified Oracle E-Business Suite on Oracle Fusion Middleware 11g and provides a comprehensive set of integration technologies. Learn about Oracle’s integration offering across data- and process-centric integrations. These technologies can be used to address various application integration challenges and styles. In this session, you will get an understanding of how, when, and where you can leverage Oracle’s integration technologies to connect end-to-end business processes across your enterprise, including your Oracle Applications portfolio.  CON9026 - Latest Oracle E-Business Suite 12.1 User Interface and Usability EnhancementsPadmaprabodh Ambale, Oracle Tuesday, Oct 2, 1:15 PM - 2:15 PM - Moscone West 2016 This Oracle development session details the latest UI enhancements to Oracle Application Framework in Oracle E-Business Suite 12.1. Developers will get a detailed look at new features to enhance usability, offer more capabilities for personalization and extensions, and support the development and use of dashboards and Web services. Topics include new rich UI capabilities such as new home page features, Navigator and Favorites pull-down menus, REST interface, embedded widgets for analytics content, Oracle Application Development Framework (Oracle ADF) task flows, third-party widgets, a look-ahead list of values, inline attachments, pop-ups, personalization and extensibility enhancements, business layer extensions, Oracle ADF integration, and mobile devices. CON8805 - Planning Your Oracle E-Business Suite Upgrade from 11i to Release 12.1 and BeyondAnne Carlson, Oracle Tuesday, Oct 2, 5:00 PM - 6:00 PM - Moscone West 3002/3004 Attend this session to hear the latest Oracle E-Business Suite 12.1 upgrade planning tips from Oracle’s support, consulting, development, and IT organizations. You’ll get specific cross-product advice on how to understand the factors that affect your project’s duration, decide on your project’s scope, develop a robust testing strategy, leverage Oracle Support resources, and more. In a nutshell, this session tells you things you need to know before embarking upon your Release 12.1 upgrade project. CON9053 - Advanced Management of Oracle E-Business Suite with Oracle Enterprise ManagerAngelo Rosado, Oracle Tuesday, Oct 2, 5:00 PM - 6:00 PM - Moscone West 2016 The task of managing and monitoring Oracle E-Business Suite environments can be very challenging. Oracle Enterprise Manager is the only product on the market that is designed to monitor and manage all the different technologies that constitute Oracle E-Business Suite applications, including end user, midtier, configuration, host, and database management—to name just a few. Customers that have implemented Oracle Enterprise Manager have experienced dramatic improvements in system visibility and diagnostic capability as well as administrator productivity. The purpose of this session is to highlight the key features and benefits of Oracle Enterprise Manager and Oracle Application Management Suite for Oracle E-Business Suite. CON8809 - Oracle E-Business Suite 12.1 Upgrade Best Practices: Technical InsightIsam Alyousfi, Udayan Parvate, Oracle Wednesday, Oct 3, 10:15 AM - 11:15 AM - Moscone West 3011 This session is ideal for organizations thinking about upgrading to Oracle E-Business Suite 12.1. It covers the fundamentals of upgrading to Release 12.1, including the technology stack components and supported upgrade paths. Hear from Oracle Development about the set of best practices for patching in general and executing the Release 12.1 technical upgrade, with special considerations for minimizing your downtime. Also get to know about relatively recent upgrade resources. CON9032 - Upgrading Your Customizations of Oracle E-Business Suite 12.1Sara Woodhull, Oracle Wednesday, Oct 3, 10:15 AM - 11:15 AM - Moscone West 2016 Have you personalized Oracle Forms or Oracle Application Framework screens in Oracle E-Business Suite? Have you used mod_plsql in Release 11i? Have you extended or customized your Release 11i environment with other tools? The technical options for upgrading these customizations as part of your Oracle E-Business Suite Release 12.1 upgrade can be bewildering. Come to this Oracle development session to learn about selecting the best upgrade approach for your existing customizations. The session will help you understand customization scenarios and use cases, tools, and technologies to ensure that your Oracle E-Business Suite Release 12.1 environment fits your users’ needs closely and that any future customizations will be easy to upgrade. CON9259 - Oracle E-Business Suite Internationalization and Multilingual FeaturesMaher Al-Nubani, Oracle Wednesday, Oct 3, 10:15 AM - 11:15 AM - Moscone West 2018 Oracle E-Business Suite supports more countries, languages, and regions than ever. Come to this Oracle development session to get an overview of internationalization features and capabilities and see new Release 12 features such as calendar support for Hijra and Thai, new group separators, lightweight multilingual support (MLS) setup, new character sets such as AL32UTF, newly supported languages, Mac certifications, Oracle iSetup support for moving MLS setups, new file export options for Unicode, new MLS number spelling options, and more. CON7188 - Mobile Apps for Oracle E-Business Suite with Oracle ADF Mobile and Oracle SOA SuiteSrikant Subramaniam, Joe Huang, Veshaal Singh, Oracle Wednesday, Oct 3, 10:15 AM - 11:15 AM - Moscone West 3001 Follow your mobile customers, employees, and partners with Oracle Fusion Middleware. See how native iPhone and iPad applications can easily be built for Oracle E-Business Suite with the new Oracle ADF Mobile and Oracle SOA Suite. Using Oracle ADF Mobile, developers can quickly develop native applications for Apple iOS and other mobile platforms. The Oracle SOA Suite/Oracle ADF Mobile combination can execute business transactions on Oracle E-Business Suite. This session includes a demo in which a mobile user approves a business transaction in Oracle E-Business Suite and a demo of the tools used to build a native on-device solution. These concepts for mobile applications also apply to other Oracle applications.CON9029 - Oracle E-Business Suite Directions: Slashing Downtimes with Online PatchingKevin Hudson, Oracle Wednesday, Oct 3, 11:45 AM - 12:45 PM - Moscone West 2016 Oracle E-Business Suite will soon include online patching (based on the Oracle Database 11g Release 2 Edition-Based Redefinition feature), which will reduce your database patching downtimes to however long it takes to bounce your database server. This Oracle development session details how online patching works, with special attention to what’s happening at a database object level when database patches are applied to an Oracle E-Business Suite environment that’s still running. Come learn about the operational and system management implications for minimizing maintenance downtimes when applying database patches with this new technology and the related impact on customizations you might have built on top of Oracle E-Business Suite. CON8806 - Upgrading to Oracle E-Business Suite 12.1: Technical and Functional PanelAndrew Katz, Komori America Corporation; Sandra Vucinic, VLAD Group, Inc. ;Srini Chavali, Cummins Inc.; Amrita Mehrok, Nadia Bendjedou, Anne Carlson Oracle Wednesday, Oct 3, 1:15 PM - 2:15 PM - Moscone West 2018 In this panel discussion, Oracle experts, customers, and partners share their experiences in upgrading to the latest release of Oracle E-Business Suite, Release 12.1. The panelists cover aspects of a typical Release 12 upgrade, technical (upgrading the technical infrastructure) as well as functional (upgrading to the new financial infrastructure). Hear directly from the experts who either develop the product or support, implement, or upgrade it, and find out how to apply their lessons learned to your organization. CON9027 - Personalize and Extend Oracle E-Business Suite Applications with Rich MashupsGustavo Jimenez, Padmaprabodh Ambale, Oracle Wednesday, Oct 3, 1:15 PM - 2:15 PM - Moscone West 2016 This session covers the use of several Oracle Fusion Middleware technologies to personalize and extend your existing Oracle E-Business Suite applications. The Oracle Fusion Middleware technologies covered include Oracle Application Development Framework (Oracle ADF), Oracle WebCenter, Oracle Endeca applications, and Oracle Business Intelligence Enterprise Edition with Oracle E-Business Suite Oracle Application Framework applications. CON9036 - Advanced Oracle E-Business Suite Architectures: Maximum Availability, Security, and MoreElke Phelps, Oracle Wednesday, Oct 3, 3:30 PM - 4:30 PM - Moscone West 2016 This session includes architecture diagrams and configuration instructions for building a maximum availability architecture (MAA) that will help you design a disaster recovery solution that fits the needs of your business. Database and application high-availability features it describes include Oracle Data Guard, Oracle Real Application Clusters (Oracle RAC), Oracle Active Data Guard, load-balancing Web and forms services, parallel concurrent processing, and the use of Oracle Exalogic and Oracle Exadata to provide a highly available environment. The session also covers the latest updates to systems management tools, AutoConfig, cloud computing, virtualization, and Oracle WebLogic Server and provides sneak previews of upcoming functionality. CON9047 - Efficiently Scaling Oracle E-Business Suite on Oracle Exadata and Oracle ExalogicIsam Alyousfi, Nishit Rao, Oracle Wednesday, Oct 3, 5:00 PM - 6:00 PM - Moscone West 2016 Oracle Exadata and Oracle Exalogic are designed from the ground up with optimizations in software and hardware to deliver superfast performance for mission-critical applications such as Oracle E-Business Suite. Oracle E-Business Suite applications run three to eight times as fast on the Oracle Exadata/Oracle Exalogic platform in standard benchmark tests. Besides performance, customers benefit from simplified support, enhanced manageability, and the ability to consolidate multiple Oracle E-Business Suite instances. Attend this session to understand best practices for Oracle E-Business Suite deployment on Oracle Exalogic and Oracle Exadata through customer case studies. Learn how adopting the Exa* platform increases efficiency, simplifies scaling, and boosts performance for peak loads. CON8716 - Web Services and SOA Integration Options for Oracle E-Business SuiteRekha Ayothi, Veshaal Singh, Oracle Thursday, Oct 4, 11:15 AM - 12:15 PM - Moscone West 2016 This Oracle development session provides a deep dive into a subset of the Web services and SOA-related integration options available to Oracle E-Business Suite systems integrators. It offers a technical look at Oracle E-Business Suite Integrated SOA Gateway, Oracle SOA Suite, Oracle Application Adapters for Data Integration for Oracle E-Business Suite, and other Web services options for integrating Oracle E-Business Suite with other applications. Systems integrators and developers will get an overview of the latest integration capabilities and technologies available out of the box with Oracle E-Business Suite and possibly a sneak preview of upcoming functionality and features. CON9030 - Recommendations for Oracle E-Business Suite Performance TuningIsam Alyousfi, Samer Barakat, Oracle Thursday, Oct 4, 11:15 AM - 12:15 PM - Moscone West 2018 Need to squeeze more performance out of your existing servers? This packed Oracle development session summarizes practical tips and lessons learned from performance-tuning and benchmarking the world’s largest Oracle E-Business Suite environments. Apps sysadmins will learn concrete tips and techniques for identifying and resolving performance bottlenecks on all layers, with special attention to application- and database-tier servers. Learn about tuning Oracle Forms, Oracle Concurrent Manager, Apache, and Oracle Discoverer. Track down memory leaks and other issues at the Java and JVM layers. The session also covers Oracle E-Business Suite product-level tuning, including Oracle Workflow, Oracle Order Management, Oracle Payroll, and other modules. CON3429 - Using Oracle ADF with Oracle E-Business Suite: The Full Integration ViewSiva Puthurkattil, Lake County; Juan Camilo Ruiz, Sara Woodhull, Oracle Thursday, Oct 4, 11:15 AM - 12:15 PM - Moscone West 3003 Oracle E-Business Suite delivers functionality for handling the core business of your organization. However, user requirements and new technologies are driving an emerging need to implement new types of user interfaces for these applications. This session provides an overview of how to use Oracle Application Development Framework (Oracle ADF) to deliver cutting-edge Web 2.0 and mobile rich user interfaces that front existing Oracle E-Business Suite processes, and it also explores all the existing types of integration between the two worlds. CON9020 - Integrating Oracle E-Business Suite with Oracle Identity Management SolutionsSunil Ghosh, Elke Phelps, Oracle Thursday, Oct 4, 12:45 PM - 1:45 PM - Moscone West 2016 Need to integrate Oracle E-Business Suite with Microsoft Windows Kerberos, Active Directory, CA Netegrity SiteMinder, or other third-party authentication systems? Want to understand your options when Oracle Premier Support for Oracle Single Sign-On ends in December 2011? This Oracle Development session covers the latest certified integrations with Oracle Access Manager 11g and Oracle Internet Directory 11g, which can be used individually or as bridges for integrating with third-party authentication solutions. The session presents an architectural overview of how Oracle Access Manager, its WebGate and AccessGate components, and Oracle Internet Directory work together, with implications for Oracle Discoverer, Oracle Portal, and other Oracle Fusion identity management products. CON9019 - Troubleshooting, Diagnosing, and Optimizing Oracle E-Business Suite TechnologyGustavo Jimenez, Oracle Thursday, Oct 4, 2:15 PM - 3:15 PM - Moscone West 2016 This session covers how you can proactively diagnose Oracle E-Business Suite applications, including extensions built with Oracle Fusion Middleware technologies such as Oracle Application Development Framework (Oracle ADF) and Oracle WebCenter to catch potential issues in the middle tier before they become more serious. Topics include debugging, logging infrastructure, warning signs, performance tuning, information required when logging service requests, general JVM optimization, and an overall picture of all the moving parts that make it possible for Oracle E-Business Suite to isolate and fix problems. Also learn how Oracle Diagnostics Framework will help prevent downtime caused by failures. CON9031 - The Top 10 Things You Can Do to Secure Your Oracle E-Business Suite InstanceEric Bing, Erik Graversen, Oracle Thursday, Oct 4, 2:15 PM - 3:15 PM - Moscone West 2018 Learn the top 10 things you can do to secure your applications and your sensitive data. This Oracle development session for system administrators and security professionals explores some of the most important and overlooked things you can do to secure your Oracle E-Business Suite instance. It also covers data masking and other mechanisms for protecting sensitive data. Special Interest Groups (SIG) Some of our most senior staff have been invited to participate on the following SIG meetings as guest speakers: SIG10525 - OAUG - Archive & Purge SIGBrian Bent - Pre-Sales Engineer, TierData, Inc. Sunday, Sep 30, 10:30 AM - 12:00 PM - Moscone West 3011 The Archive and Purge SIG is an organization in which users can share their experiences and solicit functional and technical advice on archiving and purging data in Oracle E-Business Suite. This session provides an opportunity for users to network and share best practices, tips, and tricks. Guest: Oracle E-Business Suite Database Performance, Archive & Purging - Q&A SessionIsam Alyousfi, Senior Director, Applications Performance, Oracle SIG10547 - OAUG - Oracle E-Business (EBS) Applications Technology SIGSrini Chavali - IT Director, Cummins Inc Sunday, Sep 30, 10:30 AM - 12:00 PM - Moscone West 3018 The general purpose of the EBS Applications Technology SIG is to inform and educate its members about current and future components of the tech stack as they relate to Oracle E-Business Suite. Attend this meeting for networking and education and to share best practices. Guest: Oracle E-Business Suite Technology Certification Roadmap - Presentation and Q&ASteven Chan, Sr. Director, Applications Technology Group, Oracle SIG10559 - OAUG - User Management SIGSusan Behn - VP of Oracle Delivery, Infosemantics, Inc. Sunday, Sep 30, 10:30 AM - 12:00 PM - Moscone West 3024 The E-Business Suite User Management SIG focuses on the components of user management that enable Oracle E-Business Suite users to define administrative functions and manage users’ access to functions and data based on roles within an organization—rather than the user’s individual identity—which is referred to as role-based access control (RBAC). This meeting includes an introduction to Oracle User Management that covers the Oracle User Management building blocks and presents an example of creating a security policy.Guest: Security and User Management - Q&A SessionEric Bing, Sr. Director, EBS Security, OracleSara Woodhull, Principal Product Manager, Applications Technology Group, Oracle SIG10515 - OAUG – Upgrade SIGBarbara Matthews - Consultant, On Call DBASandra Vucinic, VLAD Group, Inc. Sunday, Sep 30, 12:00 PM - 2:00 PM - Moscone West 3009 This Upgrade SIG session starts with a business meeting and then features a Q&A panel discussion on Oracle E-Business Suite upgrade topics. The session• Reviews Upgrade SIG goals and objectives• Provides answers, during the Q&A session, to questions related to Oracle E-Business Suite upgrades• Shares “real world” experiences, tips, and techniques for Oracle E-Business Suite upgrades to Release 12.1. Guest: Oracle E-Business Suite Upgrade - Q&A SessionAnne Carlson - Sr. Director, Oracle E-Business Suite Product Strategy, OracleUdayan Parvate - Director, EBS Release Engineering, OracleSuzana Ferrari, Sr. Principal Consultant, OracleIsam Alyousfi, Sr. Director, Applications Performance, Oracle SIG10552 - OAUG - Oracle E-Business Suite SIGDonna Rosentrater - Manager, Global Sourcing & Procurement Systems, TJX Sunday, Sep 30, 12:15 PM - 1:45 PM - Moscone West 3020 The E-Business Suite SIG, affiliated with OAUG, supports Oracle E-Business Suite users through networking, education, and sharing of best practices. This SIG meeting will feature a general discussion of Oracle E-Business Suite product strategies in Release 12 and migration to Oracle Fusion Applications. Guest: Oracle E-Business Suite - Q&A SessionJeanne Lowell, Vice President, EBS Product Strategy, OracleNadia Bendjedou, Sr. Director, Product Strategy, Oracle SIG10556 - OAUG - SysAdmin SIGRandy Giefer - Sr Systems and Security Architect, Solution Beacon, LLC Sunday, Sep 30, 12:15 PM - 1:45 PM - Moscone West 3022 The SysAdmin SIG provides a forum in which OAUG members and participants can share updates, tips, and successful practices relating to system administration in an Oracle applications environment. The SysAdmin SIG strives to enable system administrators to become more effective and efficient in their jobs by providing them with access to people and information that can increase their system administration knowledge and experience. Attend this meeting to network, share best practices, and benefit from educational content. Guest: Oracle E-Business Suite 12.2 Online Patching- Presentation and Q&AKevin Hudson, Sr. Director, Applications Technology Group, Oracle SIG10553 - OAUG - Database SIGMichael Brown - Senior DBA, COLIBRI LTD LC Sunday, Sep 30, 2:00 PM - 3:15 PM - Moscone West 3020 The OAUG Database SIG provides an opportunity for applications database administrators to learn from and share their experiences with supporting the various Oracle applications environments. This session will include a brief business meeting followed by a short presentation. It will end with an open discussion among the attendees about items of interest to those present. Guest: Oracle E-Business Suite Database Performance - Presentation and Q&AIsam Alyousfi, Sr. Director, Applications Performance, Oracle Meet the Experts We're planning two round-table discussions where you can review your questions with senior E-Business Suite ATG staff: MTE9648 - Meet the Experts for Oracle E-Business Suite: Planning Your Upgrade Jeanne Lowell - VP, EBS Product Strategy, Oracle John Abraham - Sr. Principal Product Manager, Oracle Nadia Bendjedou - Sr. Director - Product Strategy, Oracle Anne Carlson - Sr. Director, Applications Technology Group, Oracle Udayan Parvate - Director, EBS Release Engineering, Oracle Isam Alyousfi, Sr. Director, Applications Performance, Oracle Monday, Oct 1, 3:15 PM - 4:15 PM - Moscone West 2001A Don’t miss this Oracle Applications Meet the Experts session with experts who specialize in Oracle E-Business Suite upgrade best practices. This is the place where attendees can have informal and semistructured but open one-on-one discussions with Strategy and Development regarding Oracle Applications strategy and your specific business and IT strategy. The experts will be available to discuss the value of the latest releases and share insights into the best path for your enterprise, so come ready with your questions. Space is limited, so make sure you register. MTE9649 - Meet the Oracle E-Business Suite Tools and Technology Experts Lisa Parekh - Vice President, Technology Integration, Oracle Steven Chan - Sr. Director, Oracle Elke Phelps - Sr. Principal Product Manager, Applications Technology Group, Oracle Max Arderius - Manager, Applications Technology Group, Oracle Tuesday, Oct 2, 1:15 PM - 2:15 PM - Moscone West 2001A Don’t miss this Oracle Applications Meet the Experts session with experts who specialize in Oracle E-Business Suite technology. This is the place where attendees can have informal and semistructured but open one-on-one discussions with Strategy and Development regarding Oracle Applications strategy and your specific business and IT strategy. The experts will be available to discuss the value of the latest releases and share insights into the best path for your enterprise, so come ready with your questions. Space is limited, so make sure you register. Demos We have five booths in the exhibition demogrounds this year, where you can try ATG technologies firsthand and get your questions answered. Please stop by and meet our staff at the following locations: Advanced Architecture and Technology Stack for Oracle E-Business Suite (W-067) New User Productivity Capabilities in Oracle E-Business Suite (W-065) End-to-End Management of Oracle E-Business Suite (W-063) Oracle E-Business Suite 12.1 Technical Upgrade Best Practices (W-066) SOA-Based Integration for Oracle E-Business Suite (W-064)

    Read the article

  • West Wind WebSurge - an easy way to Load Test Web Applications

    - by Rick Strahl
    A few months ago on a project the subject of load testing came up. We were having some serious issues with a Web application that would start spewing SQL lock errors under somewhat heavy load. These sort of errors can be tough to catch, precisely because they only occur under load and not during typical development testing. To replicate this error more reliably we needed to put a load on the application and run it for a while before these SQL errors would flare up. It’s been a while since I’d looked at load testing tools, so I spent a bit of time looking at different tools and frankly didn’t really find anything that was a good fit. A lot of tools were either a pain to use, didn’t have the basic features I needed, or are extravagantly expensive. In  the end I got frustrated enough to build an initially small custom load test solution that then morphed into a more generic library, then gained a console front end and eventually turned into a full blown Web load testing tool that is now called West Wind WebSurge. I got seriously frustrated looking for tools every time I needed some quick and dirty load testing for an application. If my aim is to just put an application under heavy enough load to find a scalability problem in code, or to simply try and push an application to its limits on the hardware it’s running I shouldn’t have to have to struggle to set up tests. It should be easy enough to get going in a few minutes, so that the testing can be set up quickly so that it can be done on a regular basis without a lot of hassle. And that was the goal when I started to build out my initial custom load tester into a more widely usable tool. If you’re in a hurry and you want to check it out, you can find more information and download links here: West Wind WebSurge Product Page Walk through Video Download link (zip) Install from Chocolatey Source on GitHub For a more detailed discussion of the why’s and how’s and some background continue reading. How did I get here? When I started out on this path, I wasn’t planning on building a tool like this myself – but I got frustrated enough looking at what’s out there to think that I can do better than what’s available for the most common simple load testing scenarios. When we ran into the SQL lock problems I mentioned, I started looking around what’s available for Web load testing solutions that would work for our whole team which consisted of a few developers and a couple of IT guys both of which needed to be able to run the tests. It had been a while since I looked at tools and I figured that by now there should be some good solutions out there, but as it turns out I didn’t really find anything that fit our relatively simple needs without costing an arm and a leg… I spent the better part of a day installing and trying various load testing tools and to be frank most of them were either terrible at what they do, incredibly unfriendly to use, used some terminology I couldn’t even parse, or were extremely expensive (and I mean in the ‘sell your liver’ range of expensive). Pick your poison. There are also a number of online solutions for load testing and they actually looked more promising, but those wouldn’t work well for our scenario as the application is running inside of a private VPN with no outside access into the VPN. Most of those online solutions also ended up being very pricey as well – presumably because of the bandwidth required to test over the open Web can be enormous. When I asked around on Twitter what people were using– I got mostly… crickets. Several people mentioned Visual Studio Load Test, and most other suggestions pointed to online solutions. I did get a bunch of responses though with people asking to let them know what I found – apparently I’m not alone when it comes to finding load testing tools that are effective and easy to use. As to Visual Studio, the higher end skus of Visual Studio and the test edition include a Web load testing tool, which is quite powerful, but there are a number of issues with that: First it’s tied to Visual Studio so it’s not very portable – you need a VS install. I also find the test setup and terminology used by the VS test runner extremely confusing. Heck, it’s complicated enough that there’s even a Pluralsight course on using the Visual Studio Web test from Steve Smith. And of course you need to have one of the high end Visual Studio Skus, and those are mucho Dinero ($$$) – just for the load testing that’s rarely an option. Some of the tools are ultra extensive and let you run analysis tools on the target serves which is useful, but in most cases – just plain overkill and only distracts from what I tend to be ultimately interested in: Reproducing problems that occur at high load, and finding the upper limits and ‘what if’ scenarios as load is ramped up increasingly against a site. Yes it’s useful to have Web app instrumentation, but often that’s not what you’re interested in. I still fondly remember early days of Web testing when Microsoft had the WAST (Web Application Stress Tool) tool, which was rather simple – and also somewhat limited – but easily allowed you to create stress tests very quickly. It had some serious limitations (mainly that it didn’t work with SSL),  but the idea behind it was excellent: Create tests quickly and easily and provide a decent engine to run it locally with minimal setup. You could get set up and run tests within a few minutes. Unfortunately, that tool died a quiet death as so many of Microsoft’s tools that probably were built by an intern and then abandoned, even though there was a lot of potential and it was actually fairly widely used. Eventually the tools was no longer downloadable and now it simply doesn’t work anymore on higher end hardware. West Wind Web Surge – Making Load Testing Quick and Easy So I ended up creating West Wind WebSurge out of rebellious frustration… The goal of WebSurge is to make it drop dead simple to create load tests. It’s super easy to capture sessions either using the built in capture tool (big props to Eric Lawrence, Telerik and FiddlerCore which made that piece a snap), using the full version of Fiddler and exporting sessions, or by manually or programmatically creating text files based on plain HTTP headers to create requests. I’ve been using this tool for 4 months now on a regular basis on various projects as a reality check for performance and scalability and it’s worked extremely well for finding small performance issues. I also use it regularly as a simple URL tester, as it allows me to quickly enter a URL plus headers and content and test that URL and its results along with the ability to easily save one or more of those URLs. A few weeks back I made a walk through video that goes over most of the features of WebSurge in some detail: Note that the UI has slightly changed since then, so there are some UI improvements. Most notably the test results screen has been updated recently to a different layout and to provide more information about each URL in a session at a glance. The video and the main WebSurge site has a lot of info of basic operations. For the rest of this post I’ll talk about a few deeper aspects that may be of interest while also giving a glance at how WebSurge works. Session Capturing As you would expect, WebSurge works with Sessions of Urls that are played back under load. Here’s what the main Session View looks like: You can create session entries manually by individually adding URLs to test (on the Request tab on the right) and saving them, or you can capture output from Web Browsers, Windows Desktop applications that call services, your own applications using the built in Capture tool. With this tool you can capture anything HTTP -SSL requests and content from Web pages, AJAX calls, SOAP or REST services – again anything that uses Windows or .NET HTTP APIs. Behind the scenes the capture tool uses FiddlerCore so basically anything you can capture with Fiddler you can also capture with Web Surge Session capture tool. Alternately you can actually use Fiddler as well, and then export the captured Fiddler trace to a file, which can then be imported into WebSurge. This is a nice way to let somebody capture session without having to actually install WebSurge or for your customers to provide an exact playback scenario for a given set of URLs that cause a problem perhaps. Note that not all applications work with Fiddler’s proxy unless you configure a proxy. For example, .NET Web applications that make HTTP calls usually don’t show up in Fiddler by default. For those .NET applications you can explicitly override proxy settings to capture those requests to service calls. The capture tool also has handy optional filters that allow you to filter by domain, to help block out noise that you typically don’t want to include in your requests. For example, if your pages include links to CDNs, or Google Analytics or social links you typically don’t want to include those in your load test, so by capturing just from a specific domain you are guaranteed content from only that one domain. Additionally you can provide url filters in the configuration file – filters allow to provide filter strings that if contained in a url will cause requests to be ignored. Again this is useful if you don’t filter by domain but you want to filter out things like static image, css and script files etc. Often you’re not interested in the load characteristics of these static and usually cached resources as they just add noise to tests and often skew the overall url performance results. In my testing I tend to care only about my dynamic requests. SSL Captures require Fiddler Note, that in order to capture SSL requests you’ll have to install the Fiddler’s SSL certificate. The easiest way to do this is to install Fiddler and use its SSL configuration options to get the certificate into the local certificate store. There’s a document on the Telerik site that provides the exact steps to get SSL captures to work with Fiddler and therefore with WebSurge. Session Storage A group of URLs entered or captured make up a Session. Sessions can be saved and restored easily as they use a very simple text format that simply stored on disk. The format is slightly customized HTTP header traces separated by a separator line. The headers are standard HTTP headers except that the full URL instead of just the domain relative path is stored as part of the 1st HTTP header line for easier parsing. Because it’s just text and uses the same format that Fiddler uses for exports, it’s super easy to create Sessions by hand manually or under program control writing out to a simple text file. You can see what this format looks like in the Capture window figure above – the raw captured format is also what’s stored to disk and what WebSurge parses from. The only ‘custom’ part of these headers is that 1st line contains the full URL instead of the domain relative path and Host: header. The rest of each header are just plain standard HTTP headers with each individual URL isolated by a separator line. The format used here also uses what Fiddler produces for exports, so it’s easy to exchange or view data either in Fiddler or WebSurge. Urls can also be edited interactively so you can modify the headers easily as well: Again – it’s just plain HTTP headers so anything you can do with HTTP can be added here. Use it for single URL Testing Incidentally I’ve also found this form as an excellent way to test and replay individual URLs for simple non-load testing purposes. Because you can capture a single or many URLs and store them on disk, this also provides a nice HTTP playground where you can record URLs with their headers, and fire them one at a time or as a session and see results immediately. It’s actually an easy way for REST presentations and I find the simple UI flow actually easier than using Fiddler natively. Finally you can save one or more URLs as a session for later retrieval. I’m using this more and more for simple URL checks. Overriding Cookies and Domains Speaking of HTTP headers – you can also overwrite cookies used as part of the options. One thing that happens with modern Web applications is that you have session cookies in use for authorization. These cookies tend to expire at some point which would invalidate a test. Using the Options dialog you can actually override the cookie: which replaces the cookie for all requests with the cookie value specified here. You can capture a valid cookie from a manual HTTP request in your browser and then paste into the cookie field, to replace the existing Cookie with the new one that is now valid. Likewise you can easily replace the domain so if you captured urls on west-wind.com and now you want to test on localhost you can do that easily easily as well. You could even do something like capture on store.west-wind.com and then test on localhost/store which would also work. Running Load Tests Once you’ve created a Session you can specify the length of the test in seconds, and specify the number of simultaneous threads to run each session on. Sessions run through each of the URLs in the session sequentially by default. One option in the options list above is that you can also randomize the URLs so each thread runs requests in a different order. This avoids bunching up URLs initially when tests start as all threads run the same requests simultaneously which can sometimes skew the results of the first few minutes of a test. While sessions run some progress information is displayed: By default there’s a live view of requests displayed in a Console-like window. On the bottom of the window there’s a running total summary that displays where you’re at in the test, how many requests have been processed and what the requests per second count is currently for all requests. Note that for tests that run over a thousand requests a second it’s a good idea to turn off the console display. While the console display is nice to see that something is happening and also gives you slight idea what’s happening with actual requests, once a lot of requests are processed, this UI updating actually adds a lot of CPU overhead to the application which may cause the actual load generated to be reduced. If you are running a 1000 requests a second there’s not much to see anyway as requests roll by way too fast to see individual lines anyway. If you look on the options panel, there is a NoProgressEvents option that disables the console display. Note that the summary display is still updated approximately once a second so you can always tell that the test is still running. Test Results When the test is done you get a simple Results display: On the right you get an overall summary as well as breakdown by each URL in the session. Both success and failures are highlighted so it’s easy to see what’s breaking in your load test. The report can be printed or you can also open the HTML document in your default Web Browser for printing to PDF or saving the HTML document to disk. The list on the right shows you a partial list of the URLs that were fired so you can look in detail at the request and response data. The list can be filtered by success and failure requests. Each list is partial only (at the moment) and limited to a max of 1000 items in order to render reasonably quickly. Each item in the list can be clicked to see the full request and response data: This particularly useful for errors so you can quickly see and copy what request data was used and in the case of a GET request you can also just click the link to quickly jump to the page. For non-GET requests you can find the URL in the Session list, and use the context menu to Test the URL as configured including any HTTP content data to send. You get to see the full HTTP request and response as well as a link in the Request header to go visit the actual page. Not so useful for a POST as above, but definitely useful for GET requests. Finally you can also get a few charts. The most useful one is probably the Request per Second chart which can be accessed from the Charts menu or shortcut. Here’s what it looks like:   Results can also be exported to JSON, XML and HTML. Keep in mind that these files can get very large rather quickly though, so exports can end up taking a while to complete. Command Line Interface WebSurge runs with a small core load engine and this engine is plugged into the front end application I’ve shown so far. There’s also a command line interface available to run WebSurge from the Windows command prompt. Using the command line you can run tests for either an individual URL (similar to AB.exe for example) or a full Session file. By default when it runs WebSurgeCli shows progress every second showing total request count, failures and the requests per second for the entire test. A silent option can turn off this progress display and display only the results. The command line interface can be useful for build integration which allows checking for failures perhaps or hitting a specific requests per second count etc. It’s also nice to use this as quick and dirty URL test facility similar to the way you’d use Apache Bench (ab.exe). Unlike ab.exe though, WebSurgeCli supports SSL and makes it much easier to create multi-URL tests using either manual editing or the WebSurge UI. Current Status Currently West Wind WebSurge is still in Beta status. I’m still adding small new features and tweaking the UI in an attempt to make it as easy and self-explanatory as possible to run. Documentation for the UI and specialty features is also still a work in progress. I plan on open-sourcing this product, but it won’t be free. There’s a free version available that provides a limited number of threads and request URLs to run. A relatively low cost license  removes the thread and request limitations. Pricing info can be found on the Web site – there’s an introductory price which is $99 at the moment which I think is reasonable compared to most other for pay solutions out there that are exorbitant by comparison… The reason code is not available yet is – well, the UI portion of the app is a bit embarrassing in its current monolithic state. The UI started as a very simple interface originally that later got a lot more complex – yeah, that never happens, right? Unless there’s a lot of interest I don’t foresee re-writing the UI entirely (which would be ideal), but in the meantime at least some cleanup is required before I dare to publish it :-). The code will likely be released with version 1.0. I’m very interested in feedback. Do you think this could be useful to you and provide value over other tools you may or may not have used before? I hope so – it already has provided a ton of value for me and the work I do that made the development worthwhile at this point. You can leave a comment below, or for more extensive discussions you can post a message on the West Wind Message Board in the WebSurge section Microsoft MVPs and Insiders get a free License If you’re a Microsoft MVP or a Microsoft Insider you can get a full license for free. Send me a link to your current, official Microsoft profile and I’ll send you a not-for resale license. Send any messages to [email protected]. Resources For more info on WebSurge and to download it to try it out, use the following links. West Wind WebSurge Home Download West Wind WebSurge Getting Started with West Wind WebSurge Video© Rick Strahl, West Wind Technologies, 2005-2014Posted in ASP.NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • SQLAuthority News – TechEd India – April 12-14, 2010 Bangalore – An Unforgettable Experience – An Op

    - by pinaldave
    TechEd India was one of the largest Technology events in India led by Microsoft. This event was attended by more than 3,000 technology enthusiasts, making it one of the most well-organized events of the year. Though I attempted to attend almost all the technology events here, I have not seen any bigger or better event in Indian subcontinents other than this. There are 21 Technical Tracks at Tech·Ed India 2010 that span more than 745 learning opportunities. I was fortunate enough to be a part of this whole event as a speaker and a delegate, as well. TechEd India Speaker Badge and A Token of Lifetime Hotel Selection I presented three different sessions at TechEd India and was also a part of panel discussion. (The details of the sessions are given at the end of this blog post.) Due to extensive traveling, I stay away from my family occasionally. For this reason, I took my wife – Nupur and daughter Shaivi (8 months old) to the event along with me. We stayed at the same hotel where the event was organized so as to maximize my time bonding with my family and to have more time in networking with technology community, at the same time. The hotel Lalit Ashok is the largest and most luxurious venue one can find in Bangalore, located in the middle of the city. The cost of the hotel was a bit pricey, but looking at all the advantages, I had decided to ask for a booking there. Hotel Lalit Ashok Nupur Dave and Shaivi Dave Arrival Day – DAY 0 – April 11, 2010 I reached the event a day earlier, and that was one wise decision for I was able to relax a bit and go over my presentation for the next day’s course. I am a kind of person who likes to get everything ready ahead of time. I was also able to enjoy a pleasant evening with several Microsoft employees and my family friends. I even checked out the location where I would be doing presentations the next day. I was fortunate enough to meet Bijoy Singhal from Microsoft who helped me out with a few of the logistics issues that occured the day before. I was not aware of the fact that the very next day he was going to be “The Man” of the TechEd 2010 event. Vinod Kumar from Microsoft was really very kind as he talked to me regarding my subsequent session. He gave me some suggestions which were really helpful that I was able to incorporate them during my presentation. Finally, I was able to meet Abhishek Kant from Microsoft; his valuable suggestions and unlimited passion have inspired many people like me to work with the Community. Pradipta from Microsoft was also around, being extremely busy with logistics; however, in those busy times, he did find some good spare time to have a chat with me and the other Community leaders. I also met Harish Ranganathan and Sachin Rathi, both from Microsoft. It was so interesting to listen to both of them talking about SharePoint. I just have no words to express my overwhelmed spirit because of all these passionate young guys - Pradipta,Vinod, Bijoy, Harish, Sachin and Ahishek (of course!). Map of TechEd India 2010 Event Day 1 – April 12, 2010 From morning until night time, today was truly a very busy day for me. I had two presentations and one panel discussion for the day. Needless to say, I had a few meetings to attend as well. The day started with a keynote from S. Somaseger where he announced the launch of Visual Studio 2010. The keynote area was really eye-catching because of the very large, bigger-than- life uniform screen. This was truly one to show. The title music of the keynote was very interesting and it featured Bijoy Singhal as the model. It was interesting to talk to him afterwards, when we laughed at jokes together about his modeling assignment. TechEd India Keynote Opening Featuring Bijoy TechEd India 2010 Keynote – S. Somasegar Time: 11:15pm – 11:45pm Session 1: True Lies of SQL Server – SQL Myth Buster Following the excellent keynote, I had my very first session on the subject of SQL Server Myth Buster. At first, I was a bit nervous as right after the keynote, for this was my very first session and during my presentation I saw lots of Microsoft Product Team members. Well, it really went well and I had a really good discussion with attendees of the session. I felt that a well begin was half-done and my confidence was regained. Right after the session, I met a few of my Community friends and had meaningful discussions with them on many subjects. The abstract of the session is as follows: In this 30-minute demo session, I am going to briefly demonstrate few SQL Server Myths and their resolutions as I back them up with some demo. This demo presentation is a must-attend for all developers and administrators who would come to the event. This is going to be a very quick yet fun session. Pinal Presenting session at TechEd India 2010 Time: 1:00 PM – 2:00 PM Lunch with Somasegar After the session I went to see my daughter, and then I headed right away to the lunch with S. Somasegar – the keynote speaker and senior vice president of the Developer Division at Microsoft. I really thank to Abhishek who made it possible for us. Because of his efforts, all the MVPs had the opportunity to meet such a legendary person and had to talk with them on Microsoft Technology. Though Somasegar is currently holding such a high position in Microsoft, he is very polite and a real gentleman, and how I wish that everybody in industry is like him. Believe me, if you spread love and kindness, then that is what you will receive back. As soon as lunch time was over, I ran to the session hall as my second presentation was about to start. Time: 2:30pm – 3:30pm Session 2: Master Data Services in Microsoft SQL Server 2008 R2 Business Intelligence is a subject which was widely talked about at TechEd. Everybody was interested in this subject, and I did not excuse myself from this great concept as well. I consider myself fortunate as I was presenting on the subject of Master Data Services at TechEd. When I had initially learned this subject, I had a bit of confusion about the usage of this tool. Later on, I decided that I would tackle about how we all developers and DBAs are not able to understand something so simple such as this, and even worst, creating confusion about the technology. During system designing, it is very important to have a reference material or master lookup tables. Well, I talked about the same subject and presented the session keeping that as my center talk. The session went very well and I received lots of interesting questions. I got many compliments for talking about this subject on the real-life scenario. I really thank Rushabh Mehta (CEO, Solid Quality Mentors India) for his supportive suggestions that helped me prepare the slide deck, as well as the subject. Pinal Presenting session at TechEd India 2010 The abstract of the session is as follows: SQL Server Master Data Services will ship with SQL Server 2008 R2 and will improve Microsoft’s platform appeal. This session provides an in-depth demonstration of MDS features and highlights important usage scenarios. Master Data Services enables consistent decision-making process by allowing you to create, manage and propagate changes from a single master view of your business entities. Also, MDS – Master Data-hub which is a vital component, helps ensure the consistency of reporting across systems and deliver faster and more accurate results across the enterprise. We will talk about establishing the basis for a centralized approach to defining, deploying, and managing master data in the enterprise. Pinal Presenting session at TechEd India 2010 The day was still not over for me. I had ran into several friends but we were not able keep our enthusiasm under control about all the rumors saying that SQL Server 2008 R2 was about to be launched tomorrow in the keynote. I then ran to my third and final technical event for the day- a panel discussion with the top technologies of India. Time: 5:00pm – 6:00pm Panel Discussion: Harness the power of Web – SEO and Technical Blogging As I have delivered two technical sessions by this time, I was a bit tired but  not less enthusiastic when I had to talk about Blog and Technology. We discussed many different topics there. I told them that the most important aspect for any blog is its content. We discussed in depth the issues with plagiarism and how to avoid it. Another topic of discussion was how we technology bloggers can create awareness in the Community about what the right kind of blogging is and what morally and technically wrong acts are. A couple of questions were raised about what type of liberty a person can have in terms of writing blogs. Well, it was generically agreed that a blog is mainly a representation of our ideas and thoughts; it should not be governed by external entities. As long as one is writing what they really want to say, but not providing incorrect information or not practicing plagiarism, a blogger should be allowed to express himself. This panel discussion was supposed to be over in an hour, but the interest of the participants was remarkable and so it was extended for 30 minutes more. Finally, we decided to bring to a close the discussion and agreed that we will continue the topic next year. TechEd India Panel Discussion on Web, Technology and SEO Surprisingly, the day was just beginning after doing all of these. By this time, I have almost met all the MVP who arrived at the event, as well as many Microsoft employees. There were lots of Community folks present, too. I decided that I would go to meet several friends from the Community and continue to communicate with me on SQLAuthority.com. I also met Abhishek Baxi and had a good talk with him regarding Win Mobile and Twitter. He also took a very quick video of me wherein I spoke in my mother’s tongue, Gujarati. It was funny that I talked in Gujarati almost all the day, but when I was talking in the interview I could not find the right Gujarati words to speak. I think we all think in English when we think about Technology, so as to address universality. After meeting them, I headed towards the Speakers’ Dinner. Time: 8:00 PM – onwards Speakers Dinner The Speakers’ dinner was indeed a wonderful opportunity for all the speakers to get together and relax. We talked so many different things, from XBOX to Hindi Movies, and from SQL to Samosas. I just could not express how much fun I had. After a long evening, when I returned tmy room and met Shaivi, I just felt instantly relaxed. Kids are really gifts from God. Today was a really long but exciting day. So many things happened in just one day: Visual Studio Lanch, lunch with Somasegar, 2 technical sessions, 1 panel discussion, community leaders meeting, speakers dinner and, last but not leas,t playing with my child! A perfect day! Day 2 – April 13, 2010 Today started with a bang with the excellent keynote by Kamal Hathi who launched SQL Server 2008 R2 in India and demonstrated the power of PowerPivot to all of us. 101 Million Rows in Excel brought lots of applause from the audience. Kamal Hathi Presenting Keynote at TechEd India 2010 The day was a bit easier one for me. I had no sessions today and no events planned. I had a few meetings planned for the second day of the event. I sat in the speaker’s lounge for half a day and met many people there. I attended nearly 9 different meetings today. The subjects of the meetings were very different. Here is a list of the topics of the Community-related meetings: SQL PASS and its involvement in India and subcontinents How to start community blogging Forums and developing aptitude towards technology Ahmedabad/Gandhinagar User Groups and their developments SharePoint and SQL Business Meeting – a client meeting Business Meeting – a potential performance tuning project Business Meeting – Solid Quality Mentors (SolidQ) And family friends Pinal Dave at TechEd India The day passed by so quickly during this meeting. In the evening, I headed to Partners Expo with friends and checked out few of the booths. I really wanted to talk about some of the products, but due to the freebies there was so much crowd that I finally decided to just take the contact details of the partner. I will now start sending them with my queries and, hopefully, I will have my questions answered. Nupur and Shaivi had also one meeting to attend; it was with our family friend Vijay Raj. Vijay is also a person who loves Technology and loves it more than anybody. I see him growing and learning every day, but still remaining as a ‘human’. I believe that if someone acquires as much knowledge as him, that person will become either a computer or cyborg. Here, Vijay is still a kind gentleman and is able to stay as our close family friend. Shaivi was really happy to play with Uncle Vijay. Pinal Dave and Vijay Raj Renuka Prasad, a Microsoft MVP, impressed me with his passion and knowledge of SQL. Every time he gives me credit for his success, I believe that he is very humble. He has way more certifications than me and has worked many more years with SQL compared to me. He is an excellent photographer as well. Most of the photos in this blog post have been taken by him. I told him if ever he wants to do a part time job, he can do the photography very well. Pinal Dave and Renuka Prasad I also met L Srividya from Microsoft, whom I was looking forward to meet. She is a bundle of knowledge that everyone would surely learn a lot from her. I was able to get a few minutes from her and well, I felt confident. She enlightened me with SQL Server BI concepts, domain management and SQL Server security and few other interesting details. I also had a wonderful time talking about SharePoint with fellow Solid Quality Mentor Joy Rathnayake. He is very passionate about SharePoint but when you talk .NET and SQL with him, he is still overwhelmingly knowledgeable. In fact, while talking to him, I figured out that the recent training he delivered was on SQL Server 2008 R2. I told him a joke that it hurts my ego as he is more popular now in SQL training and consulting than me. I am sure all of you agree that working with good people is a gift from God. I am fortunate enough to work with the best of the best Industry experts. It was a great pleasure to hang out with my Community friends – Ahswin Kini, HimaBindu Vejella, Vasudev G, Suprotim Agrawal, Dhananjay, Vikram Pendse, Mahesh Dhola, Mahesh Mitkari,  Manu Zacharia, Shobhan, Hardik Shah, Ashish Mohta, Manan, Subodh Sohani and Sanjay Shetty (of course!) .  (Please let me know if I have met you at the event and forgot your name to list here). Time: 8:00 PM – onwards Community Leaders Dinner After lots of meetings, I headed towards the Community Leaders dinner meeting and met almost all the folks I met in morning. The discussion was almost the same but the real good thing was that we were enjoying it. The food was really good. Nupur was invited in the event, but Shaivi could not come. When Nupur tried to enter the event, she was stopped as Shaivi did not have the pass to enter the dinner. Nupur expressed that Shaivi is only 8 months old and does not eat outside food as well and could not stay by herself at this age, but the door keeper did not agree and asked that without the entry details Shaivi could not go in, but Nupur could. Nupur called me on phone and asked me to help her out. By the time, I was outside; the organizer of the event reached to the door and happily approved Shaivi to join the party. Once in the party, Shaivi had lots of fun meeting so many people. Shaivi Dave and Abhishek Kant Dean Guida (Infragistics President and CEO) and Pinal Dave (SQLAuthority.com) Day 3 – April 14, 2010 Though, it was last day, I was very much excited today as I was about to present my very favorite session. Query Optimization and Performance Tuning is my domain expertise and I make my leaving by consulting and training the same. Today’s session was on the same subject and as an additional twist, another subject about Spatial Database was presented. I was always intrigued with Spatial Database and I have enjoyed learning about it; however, I have never thought about Spatial Indexing before it was decided that I will do this session. I really thank Solid Quality Mentor Dr. Greg Low for his assistance in helping me prepare the slide deck and also review the content. Furthermore, today was really what I call my ‘learning day’ . So far I had not attended any session in TechEd and I felt a bit down for that. Everybody spends their valuable time & money to learn something new and exciting in TechEd and I had not attended a single session at the moment thinking that it was already last day of the event. I did have a plan for the day and I attended two technical sessions before my session of spatial database. I attended 2 sessions of Vinod Kumar. Vinod is a natural storyteller and there was no doubt that his sessions would be jam-packed. People attended his sessions simply because Vinod is syhe speaker. He did not have a single time disappointed audience; he is truly a good speaker. He knows his stuff very well. I personally do not think that in India he can be compared to anyone for SQL. Time: 12:30pm-1:30pm SQL Server Query Optimization, Execution and Debugging Query Performance I really had a fun time attending this session. Vinod made this session very interactive. The entire audience really got into the presentation and started participating in the event. Vinod was presenting a small problem with Query Tuning, which any developer would have encountered and solved with their help in such a fashion that a developer feels he or she have already resolved it. In one question, I was the only one who was ready to answer and Vinod told me in a light tone that I am now allowed to answer it! The audience really found it very amusing. There was a huge crowd around Vinod after the session. Vinod – A master storyteller! Time: 3:45pm-4:45pm Data Recovery / consistency with CheckDB This session was much heavier than the earlier one, and I must say this is my most favorite session I EVER attended in India. In this TechEd I have only attended two sessions, but in my career, I have attended numerous technical sessions not only in India, but all over the world. This session had taken my breath away. One by one, Vinod took the different databases, and started to corrupt them in different ways. Each database has some unique ways to get corrupted. Once that was done, Vinod started to show the DBCC CEHCKDB and demonstrated how it can solve your problem. He finally fixed all the databases with this single tool. I do have a good knowledge of this subject, but let me honestly admit that I have learned a lot from this session. I enjoyed and cheered during this session along with other attendees. I had total satisfaction that, just like everyone, I took advantage of the event and learned something. I am now TECHnically EDucated. Pinal Dave and Vinod Kumar After two very interactive and informative SQL Sessions from Vinod Kumar, the next turn me presenting on Spatial Database and Indexing. I got once again nervous but Vinod told me to stay natural and do my presentation. Well, once I got a huge stage with a total of four projectors and a large crowd, I felt better. Time: 5:00pm-6:00pm Session 3: Developing with SQL Server Spatial and Deep Dive into Spatial Indexing Pinal Presenting session at TechEd India 2010 Pinal Presenting session at TechEd India 2010 I kicked off this session with Michael J Swart‘s beautiful spatial image. This session was the last one for the day but, to my surprise, I had more than 200+ attendees. Slowly, the rain was starting outside and I was worried that the hall would not be full; despite this, there was not a single seat available in the first five minutes of the session. Thanks to all of you for attending my presentation. I had demonstrated the map of world (and India) and quickly explained what  Geographic and Geometry data types in Spatial Database are. This session had interesting story of Indexing and Comparison, as well as how different traditional indexes are from spatial indexing. Pinal Presenting session at TechEd India 2010 Due to the heavy rain during this event, the power went off for about 22 minutes (just an accident – nobodies fault). During these minutes, there were no audio, no video and no light. I continued to address the mass of 200+ people without any audio device and PowerPoint. I must thank the audience because not a single person left from the session. They all stayed in their place, some moved closure to listen to me properly. I noticed that the curiosity and eagerness to learn new things was at the peak even though it was the very last session of the TechEd. Everybody wanted get the maximum knowledge out of this whole event. I was touched by the support from audience. They listened and participated in my session even without any kinds of technology (no ppt, no mike, no AC, nothing). During these 22 minutes, I had completed my theory verbally. Pinal Presenting session at TechEd India 2010 After a while, we got the projector back online and we continued with some exciting demos. Many thanks to Microsoft people who worked energetically in background to get the backup power for project up. I had a very interesting demo wherein I overlaid Bangalore and Hyderabad on the India Map and find their aerial distance between them. After finding the aerial distance, we browsed online and found that SQL Server estimates the exact aerial distance between these two cities, as compared to the factual distance. There was a huge applause from the crowd on the subject that SQL Server takes into the count of the curvature of the earth and finds the precise distances based on details. During the process of finding the distance, I demonstrated a few examples of the indexes where I expressed how one can use those indexes to find these distances and how they can improve the performance of similar query. I also demonstrated few examples wherein we were able to see in which data type the Index is most useful. We finished the demos with a few more internal stuff. Pinal Presenting session at TechEd India 2010 Despite all issues, I was mostly satisfied with my presentation. I think it was the best session I have ever presented at any conference. There was no help from Technology for a while, but I still got lots of appreciation at the end. When we ended the session, the applause from the audience was so loud that for a moment, the rain was not audible. I was truly moved by the dedication of the Technology enthusiasts. Pinal Dave After Presenting session at TechEd India 2010 The abstract of the session is as follows: The Microsoft SQL Server 2008 delivers new spatial data types that enable you to consume, use, and extend location-based data through spatial-enabled applications. Attend this session to learn how to use spatial functionality in next version of SQL Server to build and optimize spatial queries. This session outlines the new geography data type to store geodetic spatial data and perform operations on it, use the new geometry data type to store planar spatial data and perform operations on it, take advantage of new spatial indexes for high performance queries, use the new spatial results tab to quickly and easily view spatial query results directly from within Management Studio, extend spatial data capabilities by building or integrating location-enabled applications through support for spatial standards and specifications and much more. Time: 8:00 PM – onwards Dinner by Sponsors After the lively session during the day, there was another dinner party courtesy of one of the sponsors of TechEd. All the MVPs and several Community leaders were present at the dinner. I would like to express my gratitude to Abhishek Kant for organizing this wonderful event for us. It was a blast and really relaxing in all angles. We all stayed there for a long time and talked about our sweet and unforgettable memories of the event. Pinal Dave and Bijoy Singhal It was really one wonderful event. After writing this much, I say that I have no words to express about how much I enjoyed TechEd. However, it is true that I shared with you only 1% of the total activities I have done at the event. There were so many people I have met, yet were not mentioned here although I wanted to write their names here, too . Anyway, I have learned so many things and up until now, I am not able to get over all the fun I had in this event. Pinal Dave at TechEd India 2010 The Next Days – April 15, 2010 – till today I am still not able to get my mind out of the whole experience I had at TechEd India 2010. It was like a whole Microsoft Family working together to celebrate a happy occasion. TechEd India – Truly An Unforgettable Experience! Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, MVP, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, SQLServer, T SQL, Technology Tagged: TechEd, TechEdIn

    Read the article

  • Rendering ASP.NET MVC Views to String

    - by Rick Strahl
    It's not uncommon in my applications that I require longish text output that does not have to be rendered into the HTTP output stream. The most common scenario I have for 'template driven' non-Web text is for emails of all sorts. Logon confirmations and verifications, email confirmations for things like orders, status updates or scheduler notifications - all of which require merged text output both within and sometimes outside of Web applications. On other occasions I also need to capture the output from certain views for logging purposes. Rather than creating text output in code, it's much nicer to use the rendering mechanism that ASP.NET MVC already provides by way of it's ViewEngines - using Razor or WebForms views - to render output to a string. This is nice because it uses the same familiar rendering mechanism that I already use for my HTTP output and it also solves the problem of where to store the templates for rendering this content in nothing more than perhaps a separate view folder. The good news is that ASP.NET MVC's rendering engine is much more modular than the full ASP.NET runtime engine which was a real pain in the butt to coerce into rendering output to string. With MVC the rendering engine has been separated out from core ASP.NET runtime, so it's actually a lot easier to get View output into a string. Getting View Output from within an MVC Application If you need to generate string output from an MVC and pass some model data to it, the process to capture this output is fairly straight forward and involves only a handful of lines of code. The catch is that this particular approach requires that you have an active ControllerContext that can be passed to the view. This means that the following approach is limited to access from within Controller methods. Here's a class that wraps the process and provides both instance and static methods to handle the rendering:/// <summary> /// Class that renders MVC views to a string using the /// standard MVC View Engine to render the view. /// /// Note: This class can only be used within MVC /// applications that have an active ControllerContext. /// </summary> public class ViewRenderer { /// <summary> /// Required Controller Context /// </summary> protected ControllerContext Context { get; set; } public ViewRenderer(ControllerContext controllerContext) { Context = controllerContext; } /// <summary> /// Renders a full MVC view to a string. Will render with the full MVC /// View engine including running _ViewStart and merging into _Layout /// </summary> /// <param name="viewPath"> /// The path to the view to render. Either in same controller, shared by /// name or as fully qualified ~/ path including extension /// </param> /// <param name="model">The model to render the view with</param> /// <returns>String of the rendered view or null on error</returns> public string RenderView(string viewPath, object model) { return RenderViewToStringInternal(viewPath, model, false); } /// <summary> /// Renders a partial MVC view to string. Use this method to render /// a partial view that doesn't merge with _Layout and doesn't fire /// _ViewStart. /// </summary> /// <param name="viewPath"> /// The path to the view to render. Either in same controller, shared by /// name or as fully qualified ~/ path including extension /// </param> /// <param name="model">The model to pass to the viewRenderer</param> /// <returns>String of the rendered view or null on error</returns> public string RenderPartialView(string viewPath, object model) { return RenderViewToStringInternal(viewPath, model, true); } public static string RenderView(string viewPath, object model, ControllerContext controllerContext) { ViewRenderer renderer = new ViewRenderer(controllerContext); return renderer.RenderView(viewPath, model); } public static string RenderPartialView(string viewPath, object model, ControllerContext controllerContext) { ViewRenderer renderer = new ViewRenderer(controllerContext); return renderer.RenderPartialView(viewPath, model); } protected string RenderViewToStringInternal(string viewPath, object model, bool partial = false) { // first find the ViewEngine for this view ViewEngineResult viewEngineResult = null; if (partial) viewEngineResult = ViewEngines.Engines.FindPartialView(Context, viewPath); else viewEngineResult = ViewEngines.Engines.FindView(Context, viewPath, null); if (viewEngineResult == null) throw new FileNotFoundException(Properties.Resources.ViewCouldNotBeFound); // get the view and attach the model to view data var view = viewEngineResult.View; Context.Controller.ViewData.Model = model; string result = null; using (var sw = new StringWriter()) { var ctx = new ViewContext(Context, view, Context.Controller.ViewData, Context.Controller.TempData, sw); view.Render(ctx, sw); result = sw.ToString(); } return result; } } The key is the RenderViewToStringInternal method. The method first tries to find the view to render based on its path which can either be in the current controller's view path or the shared view path using its simple name (PasswordRecovery) or alternately by its full virtual path (~/Views/Templates/PasswordRecovery.cshtml). This code should work both for Razor and WebForms views although I've only tried it with Razor Views. Note that WebForms Views might actually be better for plain text as Razor adds all sorts of white space into its output when there are code blocks in the template. The Web Forms engine provides more accurate rendering for raw text scenarios. Once a view engine is found the view to render can be retrieved. Views in MVC render based on data that comes off the controller like the ViewData which contains the model along with the actual ViewData and ViewBag. From the View and some of the Context data a ViewContext is created which is then used to render the view with. The View picks up the Model and other data from the ViewContext internally and processes the View the same it would be processed if it were to send its output into the HTTP output stream. The difference is that we can override the ViewContext's output stream which we provide and capture into a StringWriter(). After rendering completes the result holds the output string. If an error occurs the error behavior is similar what you see with regular MVC errors - you get a full yellow screen of death including the view error information with the line of error highlighted. It's your responsibility to handle the error - or let it bubble up to your regular Controller Error filter if you have one. To use the simple class you only need a single line of code if you call the static methods. Here's an example of some Controller code that is used to send a user notification to a customer via email in one of my applications:[HttpPost] public ActionResult ContactSeller(ContactSellerViewModel model) { InitializeViewModel(model); var entryBus = new busEntry(); var entry = entryBus.LoadByDisplayId(model.EntryId); if ( string.IsNullOrEmpty(model.Email) ) entryBus.ValidationErrors.Add("Email address can't be empty.","Email"); if ( string.IsNullOrEmpty(model.Message)) entryBus.ValidationErrors.Add("Message can't be empty.","Message"); model.EntryId = entry.DisplayId; model.EntryTitle = entry.Title; if (entryBus.ValidationErrors.Count > 0) { ErrorDisplay.AddMessages(entryBus.ValidationErrors); ErrorDisplay.ShowError("Please correct the following:"); } else { string message = ViewRenderer.RenderView("~/views/template/ContactSellerEmail.cshtml",model, ControllerContext); string title = entry.Title + " (" + entry.DisplayId + ") - " + App.Configuration.ApplicationName; AppUtils.SendEmail(title, message, model.Email, entry.User.Email, false, false)) } return View(model); } Simple! The view in this case is just a plain MVC view and in this case it's a very simple plain text email message (edited for brevity here) that is created and sent off:@model ContactSellerViewModel @{ Layout = null; }re: @Model.EntryTitle @Model.ListingUrl @Model.Message ** SECURITY ADVISORY - AVOID SCAMS ** Avoid: wiring money, cross-border deals, work-at-home ** Beware: cashier checks, money orders, escrow, shipping ** More Info: @(App.Configuration.ApplicationBaseUrl)scams.html Obviously this is a very simple view (I edited out more from this page to keep it brief) -  but other template views are much more complex HTML documents or long messages that are occasionally updated and they are a perfect fit for Razor rendering. It even works with nested partial views and _layout pages. Partial Rendering Notice that I'm rendering a full View here. In the view I explicitly set the Layout=null to avoid pulling in _layout.cshtml for this view. This can also be controlled externally by calling the RenderPartial method instead: string message = ViewRenderer.RenderPartialView("~/views/template/ContactSellerEmail.cshtml",model, ControllerContext); with this line of code no layout page (or _viewstart) will be loaded, so the output generated is just what's in the view. I find myself using Partials most of the time when rendering templates, since the target of templates usually tend to be emails or other HTML fragment like output, so the RenderPartialView() method is definitely useful to me. Rendering without a ControllerContext The preceding class is great when you're need template rendering from within MVC controller actions or anywhere where you have access to the request Controller. But if you don't have a controller context handy - maybe inside a utility function that is static, a non-Web application, or an operation that runs asynchronously in ASP.NET - which makes using the above code impossible. I haven't found a way to manually create a Controller context to provide the ViewContext() what it needs from outside of the MVC infrastructure. However, there are ways to accomplish this,  but they are a bit more complex. It's possible to host the RazorEngine on your own, which side steps all of the MVC framework and HTTP and just deals with the raw rendering engine. I wrote about this process in Hosting the Razor Engine in Non-Web Applications a long while back. It's quite a process to create a custom Razor engine and runtime, but it allows for all sorts of flexibility. There's also a RazorEngine CodePlex project that does something similar. I've been meaning to check out the latter but haven't gotten around to it since I have my own code to do this. The trick to hosting the RazorEngine to have it behave properly inside of an ASP.NET application and properly cache content so templates aren't constantly rebuild and reparsed. Anyway, in the same app as above I have one scenario where no ControllerContext is available: I have a background scheduler running inside of the app that fires on timed intervals. This process could be external but because it's lightweight we decided to fire it right inside of the ASP.NET app on a separate thread. In my app the code that renders these templates does something like this:var model = new SearchNotificationViewModel() { Entries = entries, Notification = notification, User = user }; // TODO: Need logging for errors sending string razorError = null; var result = AppUtils.RenderRazorTemplate("~/views/template/SearchNotificationTemplate.cshtml", model, razorError); which references a couple of helper functions that set up my RazorFolderHostContainer class:public static string RenderRazorTemplate(string virtualPath, object model,string errorMessage = null) { var razor = AppUtils.CreateRazorHost(); var path = virtualPath.Replace("~/", "").Replace("~", "").Replace("/", "\\"); var merged = razor.RenderTemplateToString(path, model); if (merged == null) errorMessage = razor.ErrorMessage; return merged; } /// <summary> /// Creates a RazorStringHostContainer and starts it /// Call .Stop() when you're done with it. /// /// This is a static instance /// </summary> /// <param name="virtualPath"></param> /// <param name="binBasePath"></param> /// <param name="forceLoad"></param> /// <returns></returns> public static RazorFolderHostContainer CreateRazorHost(string binBasePath = null, bool forceLoad = false) { if (binBasePath == null) { if (HttpContext.Current != null) binBasePath = HttpContext.Current.Server.MapPath("~/"); else binBasePath = AppDomain.CurrentDomain.BaseDirectory; } if (_RazorHost == null || forceLoad) { if (!binBasePath.EndsWith("\\")) binBasePath += "\\"; //var razor = new RazorStringHostContainer(); var razor = new RazorFolderHostContainer(); razor.TemplatePath = binBasePath; binBasePath += "bin\\"; razor.BaseBinaryFolder = binBasePath; razor.UseAppDomain = false; razor.ReferencedAssemblies.Add(binBasePath + "ClassifiedsBusiness.dll"); razor.ReferencedAssemblies.Add(binBasePath + "ClassifiedsWeb.dll"); razor.ReferencedAssemblies.Add(binBasePath + "Westwind.Utilities.dll"); razor.ReferencedAssemblies.Add(binBasePath + "Westwind.Web.dll"); razor.ReferencedAssemblies.Add(binBasePath + "Westwind.Web.Mvc.dll"); razor.ReferencedAssemblies.Add("System.Web.dll"); razor.ReferencedNamespaces.Add("System.Web"); razor.ReferencedNamespaces.Add("ClassifiedsBusiness"); razor.ReferencedNamespaces.Add("ClassifiedsWeb"); razor.ReferencedNamespaces.Add("Westwind.Web"); razor.ReferencedNamespaces.Add("Westwind.Utilities"); _RazorHost = razor; _RazorHost.Start(); //_RazorHost.Engine.Configuration.CompileToMemory = false; } return _RazorHost; } The RazorFolderHostContainer essentially is a full runtime that mimics a folder structure like a typical Web app does including caching semantics and compiling code only if code changes on disk. It maps a folder hierarchy to views using the ~/ path syntax. The host is then configured to add assemblies and namespaces. Unfortunately the engine is not exactly like MVC's Razor - the expression expansion and code execution are the same, but some of the support methods like sections, helpers etc. are not all there so templates have to be a bit simpler. There are other folder hosts provided as well to directly execute templates from strings (using RazorStringHostContainer). The following is an example of an HTML email template @inherits RazorHosting.RazorTemplateFolderHost <ClassifiedsWeb.SearchNotificationViewModel> <html> <head> <title>Search Notifications</title> <style> body { margin: 5px;font-family: Verdana, Arial; font-size: 10pt;} h3 { color: SteelBlue; } .entry-item { border-bottom: 1px solid grey; padding: 8px; margin-bottom: 5px; } </style> </head> <body> Hello @Model.User.Name,<br /> <p>Below are your Search Results for the search phrase:</p> <h3>@Model.Notification.SearchPhrase</h3> <small>since @TimeUtils.ShortDateString(Model.Notification.LastSearch)</small> <hr /> You can see that the syntax is a little different. Instead of the familiar @model header the raw Razor  @inherits tag is used to specify the template base class (which you can extend). I took a quick look through the feature set of RazorEngine on CodePlex (now Github I guess) and the template implementation they use is closer to MVC's razor but there are other differences. In the end don't expect exact behavior like MVC templates if you use an external Razor rendering engine. This is not what I would consider an ideal solution, but it works well enough for this project. My biggest concern is the overhead of hosting a second razor engine in a Web app and the fact that here the differences in template rendering between 'real' MVC Razor views and another RazorEngine really are noticeable. You win some, you lose some It's extremely nice to see that if you have a ControllerContext handy (which probably addresses 99% of Web app scenarios) rendering a view to string using the native MVC Razor engine is pretty simple. Kudos on making that happen - as it solves a problem I see in just about every Web application I work on. But it is a bummer that a ControllerContext is required to make this simple code work. It'd be really sweet if there was a way to render views without being so closely coupled to the ASP.NET or MVC infrastructure that requires a ControllerContext. Alternately it'd be nice to have a way for an MVC based application to create a minimal ControllerContext from scratch - maybe somebody's been down that path. I tried for a few hours to come up with a way to make that work but gave up in the soup of nested contexts (MVC/Controller/View/Http). I suspect going down this path would be similar to hosting the ASP.NET runtime requiring a WorkerRequest. Brrr…. The sad part is that it seems to me that a View should really not require much 'context' of any kind to render output to string. Yes there are a few things that clearly are required like paths to the virtual and possibly the disk paths to the root of the app, but beyond that view rendering should not require much. But, no such luck. For now custom RazorHosting seems to be the only way to make Razor rendering go outside of the MVC context… Resources Full ViewRenderer.cs source code from Westwind.Web.Mvc library Hosting the Razor Engine for Non-Web Applications RazorEngine on GitHub© Rick Strahl, West Wind Technologies, 2005-2012Posted in ASP.NET   ASP.NET  MVC   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • SQLAuthority News – TechEd India – April 12-14, 2010 Bangalore – An Unforgettable Experience – An Op

    - by pinaldave
    TechEd India was one of the largest Technology events in India led by Microsoft. This event was attended by more than 3,000 technology enthusiasts, making it one of the most well-organized events of the year. Though I attempted to attend almost all the technology events here, I have not seen any bigger or better event in Indian subcontinents other than this. There are 21 Technical Tracks at Tech·Ed India 2010 that span more than 745 learning opportunities. I was fortunate enough to be a part of this whole event as a speaker and a delegate, as well. TechEd India Speaker Badge and A Token of Lifetime Hotel Selection I presented three different sessions at TechEd India and was also a part of panel discussion. (The details of the sessions are given at the end of this blog post.) Due to extensive traveling, I stay away from my family occasionally. For this reason, I took my wife – Nupur and daughter Shaivi (8 months old) to the event along with me. We stayed at the same hotel where the event was organized so as to maximize my time bonding with my family and to have more time in networking with technology community, at the same time. The hotel Lalit Ashok is the largest and most luxurious venue one can find in Bangalore, located in the middle of the city. The cost of the hotel was a bit pricey, but looking at all the advantages, I had decided to ask for a booking there. Hotel Lalit Ashok Nupur Dave and Shaivi Dave Arrival Day – DAY 0 – April 11, 2010 I reached the event a day earlier, and that was one wise decision for I was able to relax a bit and go over my presentation for the next day’s course. I am a kind of person who likes to get everything ready ahead of time. I was also able to enjoy a pleasant evening with several Microsoft employees and my family friends. I even checked out the location where I would be doing presentations the next day. I was fortunate enough to meet Bijoy Singhal from Microsoft who helped me out with a few of the logistics issues that occured the day before. I was not aware of the fact that the very next day he was going to be “The Man” of the TechEd 2010 event. Vinod Kumar from Microsoft was really very kind as he talked to me regarding my subsequent session. He gave me some suggestions which were really helpful that I was able to incorporate them during my presentation. Finally, I was able to meet Abhishek Kant from Microsoft; his valuable suggestions and unlimited passion have inspired many people like me to work with the Community. Pradipta from Microsoft was also around, being extremely busy with logistics; however, in those busy times, he did find some good spare time to have a chat with me and the other Community leaders. I also met Harish Ranganathan and Sachin Rathi, both from Microsoft. It was so interesting to listen to both of them talking about SharePoint. I just have no words to express my overwhelmed spirit because of all these passionate young guys - Pradipta,Vinod, Bijoy, Harish, Sachin and Ahishek (of course!). Map of TechEd India 2010 Event Day 1 – April 12, 2010 From morning until night time, today was truly a very busy day for me. I had two presentations and one panel discussion for the day. Needless to say, I had a few meetings to attend as well. The day started with a keynote from S. Somaseger where he announced the launch of Visual Studio 2010. The keynote area was really eye-catching because of the very large, bigger-than- life uniform screen. This was truly one to show. The title music of the keynote was very interesting and it featured Bijoy Singhal as the model. It was interesting to talk to him afterwards, when we laughed at jokes together about his modeling assignment. TechEd India Keynote Opening Featuring Bijoy TechEd India 2010 Keynote – S. Somasegar Time: 11:15pm – 11:45pm Session 1: True Lies of SQL Server – SQL Myth Buster Following the excellent keynote, I had my very first session on the subject of SQL Server Myth Buster. At first, I was a bit nervous as right after the keynote, for this was my very first session and during my presentation I saw lots of Microsoft Product Team members. Well, it really went well and I had a really good discussion with attendees of the session. I felt that a well begin was half-done and my confidence was regained. Right after the session, I met a few of my Community friends and had meaningful discussions with them on many subjects. The abstract of the session is as follows: In this 30-minute demo session, I am going to briefly demonstrate few SQL Server Myths and their resolutions as I back them up with some demo. This demo presentation is a must-attend for all developers and administrators who would come to the event. This is going to be a very quick yet fun session. Pinal Presenting session at TechEd India 2010 Time: 1:00 PM – 2:00 PM Lunch with Somasegar After the session I went to see my daughter, and then I headed right away to the lunch with S. Somasegar – the keynote speaker and senior vice president of the Developer Division at Microsoft. I really thank to Abhishek who made it possible for us. Because of his efforts, all the MVPs had the opportunity to meet such a legendary person and had to talk with them on Microsoft Technology. Though Somasegar is currently holding such a high position in Microsoft, he is very polite and a real gentleman, and how I wish that everybody in industry is like him. Believe me, if you spread love and kindness, then that is what you will receive back. As soon as lunch time was over, I ran to the session hall as my second presentation was about to start. Time: 2:30pm – 3:30pm Session 2: Master Data Services in Microsoft SQL Server 2008 R2 Business Intelligence is a subject which was widely talked about at TechEd. Everybody was interested in this subject, and I did not excuse myself from this great concept as well. I consider myself fortunate as I was presenting on the subject of Master Data Services at TechEd. When I had initially learned this subject, I had a bit of confusion about the usage of this tool. Later on, I decided that I would tackle about how we all developers and DBAs are not able to understand something so simple such as this, and even worst, creating confusion about the technology. During system designing, it is very important to have a reference material or master lookup tables. Well, I talked about the same subject and presented the session keeping that as my center talk. The session went very well and I received lots of interesting questions. I got many compliments for talking about this subject on the real-life scenario. I really thank Rushabh Mehta (CEO, Solid Quality Mentors India) for his supportive suggestions that helped me prepare the slide deck, as well as the subject. Pinal Presenting session at TechEd India 2010 The abstract of the session is as follows: SQL Server Master Data Services will ship with SQL Server 2008 R2 and will improve Microsoft’s platform appeal. This session provides an in-depth demonstration of MDS features and highlights important usage scenarios. Master Data Services enables consistent decision-making process by allowing you to create, manage and propagate changes from a single master view of your business entities. Also, MDS – Master Data-hub which is a vital component, helps ensure the consistency of reporting across systems and deliver faster and more accurate results across the enterprise. We will talk about establishing the basis for a centralized approach to defining, deploying, and managing master data in the enterprise. Pinal Presenting session at TechEd India 2010 The day was still not over for me. I had ran into several friends but we were not able keep our enthusiasm under control about all the rumors saying that SQL Server 2008 R2 was about to be launched tomorrow in the keynote. I then ran to my third and final technical event for the day- a panel discussion with the top technologies of India. Time: 5:00pm – 6:00pm Panel Discussion: Harness the power of Web – SEO and Technical Blogging As I have delivered two technical sessions by this time, I was a bit tired but  not less enthusiastic when I had to talk about Blog and Technology. We discussed many different topics there. I told them that the most important aspect for any blog is its content. We discussed in depth the issues with plagiarism and how to avoid it. Another topic of discussion was how we technology bloggers can create awareness in the Community about what the right kind of blogging is and what morally and technically wrong acts are. A couple of questions were raised about what type of liberty a person can have in terms of writing blogs. Well, it was generically agreed that a blog is mainly a representation of our ideas and thoughts; it should not be governed by external entities. As long as one is writing what they really want to say, but not providing incorrect information or not practicing plagiarism, a blogger should be allowed to express himself. This panel discussion was supposed to be over in an hour, but the interest of the participants was remarkable and so it was extended for 30 minutes more. Finally, we decided to bring to a close the discussion and agreed that we will continue the topic next year. TechEd India Panel Discussion on Web, Technology and SEO Surprisingly, the day was just beginning after doing all of these. By this time, I have almost met all the MVP who arrived at the event, as well as many Microsoft employees. There were lots of Community folks present, too. I decided that I would go to meet several friends from the Community and continue to communicate with me on SQLAuthority.com. I also met Abhishek Baxi and had a good talk with him regarding Win Mobile and Twitter. He also took a very quick video of me wherein I spoke in my mother’s tongue, Gujarati. It was funny that I talked in Gujarati almost all the day, but when I was talking in the interview I could not find the right Gujarati words to speak. I think we all think in English when we think about Technology, so as to address universality. After meeting them, I headed towards the Speakers’ Dinner. Time: 8:00 PM – onwards Speakers Dinner The Speakers’ dinner was indeed a wonderful opportunity for all the speakers to get together and relax. We talked so many different things, from XBOX to Hindi Movies, and from SQL to Samosas. I just could not express how much fun I had. After a long evening, when I returned tmy room and met Shaivi, I just felt instantly relaxed. Kids are really gifts from God. Today was a really long but exciting day. So many things happened in just one day: Visual Studio Lanch, lunch with Somasegar, 2 technical sessions, 1 panel discussion, community leaders meeting, speakers dinner and, last but not leas,t playing with my child! A perfect day! Day 2 – April 13, 2010 Today started with a bang with the excellent keynote by Kamal Hathi who launched SQL Server 2008 R2 in India and demonstrated the power of PowerPivot to all of us. 101 Million Rows in Excel brought lots of applause from the audience. Kamal Hathi Presenting Keynote at TechEd India 2010 The day was a bit easier one for me. I had no sessions today and no events planned. I had a few meetings planned for the second day of the event. I sat in the speaker’s lounge for half a day and met many people there. I attended nearly 9 different meetings today. The subjects of the meetings were very different. Here is a list of the topics of the Community-related meetings: SQL PASS and its involvement in India and subcontinents How to start community blogging Forums and developing aptitude towards technology Ahmedabad/Gandhinagar User Groups and their developments SharePoint and SQL Business Meeting – a client meeting Business Meeting – a potential performance tuning project Business Meeting – Solid Quality Mentors (SolidQ) And family friends Pinal Dave at TechEd India The day passed by so quickly during this meeting. In the evening, I headed to Partners Expo with friends and checked out few of the booths. I really wanted to talk about some of the products, but due to the freebies there was so much crowd that I finally decided to just take the contact details of the partner. I will now start sending them with my queries and, hopefully, I will have my questions answered. Nupur and Shaivi had also one meeting to attend; it was with our family friend Vijay Raj. Vijay is also a person who loves Technology and loves it more than anybody. I see him growing and learning every day, but still remaining as a ‘human’. I believe that if someone acquires as much knowledge as him, that person will become either a computer or cyborg. Here, Vijay is still a kind gentleman and is able to stay as our close family friend. Shaivi was really happy to play with Uncle Vijay. Pinal Dave and Vijay Raj Renuka Prasad, a Microsoft MVP, impressed me with his passion and knowledge of SQL. Every time he gives me credit for his success, I believe that he is very humble. He has way more certifications than me and has worked many more years with SQL compared to me. He is an excellent photographer as well. Most of the photos in this blog post have been taken by him. I told him if ever he wants to do a part time job, he can do the photography very well. Pinal Dave and Renuka Prasad I also met L Srividya from Microsoft, whom I was looking forward to meet. She is a bundle of knowledge that everyone would surely learn a lot from her. I was able to get a few minutes from her and well, I felt confident. She enlightened me with SQL Server BI concepts, domain management and SQL Server security and few other interesting details. I also had a wonderful time talking about SharePoint with fellow Solid Quality Mentor Joy Rathnayake. He is very passionate about SharePoint but when you talk .NET and SQL with him, he is still overwhelmingly knowledgeable. In fact, while talking to him, I figured out that the recent training he delivered was on SQL Server 2008 R2. I told him a joke that it hurts my ego as he is more popular now in SQL training and consulting than me. I am sure all of you agree that working with good people is a gift from God. I am fortunate enough to work with the best of the best Industry experts. It was a great pleasure to hang out with my Community friends – Ahswin Kini, HimaBindu Vejella, Vasudev G, Suprotim Agrawal, Dhananjay, Vikram Pendse, Mahesh Dhola, Mahesh Mitkari,  Manu Zacharia, Shobhan, Hardik Shah, Ashish Mohta, Manan, Subodh Sohani and Sanjay Shetty (of course!) .  (Please let me know if I have met you at the event and forgot your name to list here). Time: 8:00 PM – onwards Community Leaders Dinner After lots of meetings, I headed towards the Community Leaders dinner meeting and met almost all the folks I met in morning. The discussion was almost the same but the real good thing was that we were enjoying it. The food was really good. Nupur was invited in the event, but Shaivi could not come. When Nupur tried to enter the event, she was stopped as Shaivi did not have the pass to enter the dinner. Nupur expressed that Shaivi is only 8 months old and does not eat outside food as well and could not stay by herself at this age, but the door keeper did not agree and asked that without the entry details Shaivi could not go in, but Nupur could. Nupur called me on phone and asked me to help her out. By the time, I was outside; the organizer of the event reached to the door and happily approved Shaivi to join the party. Once in the party, Shaivi had lots of fun meeting so many people. Shaivi Dave and Abhishek Kant Dean Guida (Infragistics President and CEO) and Pinal Dave (SQLAuthority.com) Day 3 – April 14, 2010 Though, it was last day, I was very much excited today as I was about to present my very favorite session. Query Optimization and Performance Tuning is my domain expertise and I make my leaving by consulting and training the same. Today’s session was on the same subject and as an additional twist, another subject about Spatial Database was presented. I was always intrigued with Spatial Database and I have enjoyed learning about it; however, I have never thought about Spatial Indexing before it was decided that I will do this session. I really thank Solid Quality Mentor Dr. Greg Low for his assistance in helping me prepare the slide deck and also review the content. Furthermore, today was really what I call my ‘learning day’ . So far I had not attended any session in TechEd and I felt a bit down for that. Everybody spends their valuable time & money to learn something new and exciting in TechEd and I had not attended a single session at the moment thinking that it was already last day of the event. I did have a plan for the day and I attended two technical sessions before my session of spatial database. I attended 2 sessions of Vinod Kumar. Vinod is a natural storyteller and there was no doubt that his sessions would be jam-packed. People attended his sessions simply because Vinod is syhe speaker. He did not have a single time disappointed audience; he is truly a good speaker. He knows his stuff very well. I personally do not think that in India he can be compared to anyone for SQL. Time: 12:30pm-1:30pm SQL Server Query Optimization, Execution and Debugging Query Performance I really had a fun time attending this session. Vinod made this session very interactive. The entire audience really got into the presentation and started participating in the event. Vinod was presenting a small problem with Query Tuning, which any developer would have encountered and solved with their help in such a fashion that a developer feels he or she have already resolved it. In one question, I was the only one who was ready to answer and Vinod told me in a light tone that I am now allowed to answer it! The audience really found it very amusing. There was a huge crowd around Vinod after the session. Vinod – A master storyteller! Time: 3:45pm-4:45pm Data Recovery / consistency with CheckDB This session was much heavier than the earlier one, and I must say this is my most favorite session I EVER attended in India. In this TechEd I have only attended two sessions, but in my career, I have attended numerous technical sessions not only in India, but all over the world. This session had taken my breath away. One by one, Vinod took the different databases, and started to corrupt them in different ways. Each database has some unique ways to get corrupted. Once that was done, Vinod started to show the DBCC CEHCKDB and demonstrated how it can solve your problem. He finally fixed all the databases with this single tool. I do have a good knowledge of this subject, but let me honestly admit that I have learned a lot from this session. I enjoyed and cheered during this session along with other attendees. I had total satisfaction that, just like everyone, I took advantage of the event and learned something. I am now TECHnically EDucated. Pinal Dave and Vinod Kumar After two very interactive and informative SQL Sessions from Vinod Kumar, the next turn me presenting on Spatial Database and Indexing. I got once again nervous but Vinod told me to stay natural and do my presentation. Well, once I got a huge stage with a total of four projectors and a large crowd, I felt better. Time: 5:00pm-6:00pm Session 3: Developing with SQL Server Spatial and Deep Dive into Spatial Indexing Pinal Presenting session at TechEd India 2010 Pinal Presenting session at TechEd India 2010 I kicked off this session with Michael J Swart‘s beautiful spatial image. This session was the last one for the day but, to my surprise, I had more than 200+ attendees. Slowly, the rain was starting outside and I was worried that the hall would not be full; despite this, there was not a single seat available in the first five minutes of the session. Thanks to all of you for attending my presentation. I had demonstrated the map of world (and India) and quickly explained what  Geographic and Geometry data types in Spatial Database are. This session had interesting story of Indexing and Comparison, as well as how different traditional indexes are from spatial indexing. Pinal Presenting session at TechEd India 2010 Due to the heavy rain during this event, the power went off for about 22 minutes (just an accident – nobodies fault). During these minutes, there were no audio, no video and no light. I continued to address the mass of 200+ people without any audio device and PowerPoint. I must thank the audience because not a single person left from the session. They all stayed in their place, some moved closure to listen to me properly. I noticed that the curiosity and eagerness to learn new things was at the peak even though it was the very last session of the TechEd. Everybody wanted get the maximum knowledge out of this whole event. I was touched by the support from audience. They listened and participated in my session even without any kinds of technology (no ppt, no mike, no AC, nothing). During these 22 minutes, I had completed my theory verbally. Pinal Presenting session at TechEd India 2010 After a while, we got the projector back online and we continued with some exciting demos. Many thanks to Microsoft people who worked energetically in background to get the backup power for project up. I had a very interesting demo wherein I overlaid Bangalore and Hyderabad on the India Map and find their aerial distance between them. After finding the aerial distance, we browsed online and found that SQL Server estimates the exact aerial distance between these two cities, as compared to the factual distance. There was a huge applause from the crowd on the subject that SQL Server takes into the count of the curvature of the earth and finds the precise distances based on details. During the process of finding the distance, I demonstrated a few examples of the indexes where I expressed how one can use those indexes to find these distances and how they can improve the performance of similar query. I also demonstrated few examples wherein we were able to see in which data type the Index is most useful. We finished the demos with a few more internal stuff. Pinal Presenting session at TechEd India 2010 Despite all issues, I was mostly satisfied with my presentation. I think it was the best session I have ever presented at any conference. There was no help from Technology for a while, but I still got lots of appreciation at the end. When we ended the session, the applause from the audience was so loud that for a moment, the rain was not audible. I was truly moved by the dedication of the Technology enthusiasts. Pinal Dave After Presenting session at TechEd India 2010 The abstract of the session is as follows: The Microsoft SQL Server 2008 delivers new spatial data types that enable you to consume, use, and extend location-based data through spatial-enabled applications. Attend this session to learn how to use spatial functionality in next version of SQL Server to build and optimize spatial queries. This session outlines the new geography data type to store geodetic spatial data and perform operations on it, use the new geometry data type to store planar spatial data and perform operations on it, take advantage of new spatial indexes for high performance queries, use the new spatial results tab to quickly and easily view spatial query results directly from within Management Studio, extend spatial data capabilities by building or integrating location-enabled applications through support for spatial standards and specifications and much more. Time: 8:00 PM – onwards Dinner by Sponsors After the lively session during the day, there was another dinner party courtesy of one of the sponsors of TechEd. All the MVPs and several Community leaders were present at the dinner. I would like to express my gratitude to Abhishek Kant for organizing this wonderful event for us. It was a blast and really relaxing in all angles. We all stayed there for a long time and talked about our sweet and unforgettable memories of the event. Pinal Dave and Bijoy Singhal It was really one wonderful event. After writing this much, I say that I have no words to express about how much I enjoyed TechEd. However, it is true that I shared with you only 1% of the total activities I have done at the event. There were so many people I have met, yet were not mentioned here although I wanted to write their names here, too . Anyway, I have learned so many things and up until now, I am not able to get over all the fun I had in this event. Pinal Dave at TechEd India 2010 The Next Days – April 15, 2010 – till today I am still not able to get my mind out of the whole experience I had at TechEd India 2010. It was like a whole Microsoft Family working together to celebrate a happy occasion. TechEd India – Truly An Unforgettable Experience! Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, MVP, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, SQLServer, T SQL, Technology Tagged: TechEd, TechEdIn

    Read the article

  • Creating STA COM compatible ASP.NET Applications

    - by Rick Strahl
    When building ASP.NET applications that interface with old school COM objects like those created with VB6 or Visual FoxPro (MTDLL), it's extremely important that the threads that are serving requests use Single Threaded Apartment Threading. STA is a COM built-in technology that allows essentially single threaded components to operate reliably in a multi-threaded environment. STA's guarantee that COM objects instantiated on a specific thread stay on that specific thread and any access to a COM object from another thread automatically marshals that thread to the STA thread. The end effect is that you can have multiple threads, but a COM object instance lives on a fixed never changing thread. ASP.NET by default uses MTA (multi-threaded apartment) threads which are truly free spinning threads that pay no heed to COM object marshaling. This is vastly more efficient than STA threading which has a bit of overhead in determining whether it's OK to run code on a given thread or whether some sort of thread/COM marshaling needs to occur. MTA COM components can be very efficient, but STA COM components in a multi-threaded environment always tend to have a fair amount of overhead. It's amazing how much COM Interop I still see today so while it seems really old school to be talking about this topic, it's actually quite apropos for me as I have many customers using legacy COM systems that need to interface with other .NET applications. In this post I'm consolidating some of the hacks I've used to integrate with various ASP.NET technologies when using STA COM Components. STA in ASP.NET Support for STA threading in the ASP.NET framework is fairly limited. Specifically only the original ASP.NET WebForms technology supports STA threading directly via its STA Page Handler implementation or what you might know as ASPCOMPAT mode. For WebForms running STA components is as easy as specifying the ASPCOMPAT attribute in the @Page tag:<%@ Page Language="C#" AspCompat="true" %> which runs the page in STA mode. Removing it runs in MTA mode. Simple. Unfortunately all other ASP.NET technologies built on top of the core ASP.NET engine do not support STA natively. So if you want to use STA COM components in MVC or with class ASMX Web Services, there's no automatic way like the ASPCOMPAT keyword available. So what happens when you run an STA COM component in an MTA application? In low volume environments - nothing much will happen. The COM objects will appear to work just fine as there are no simultaneous thread interactions and the COM component will happily run on a single thread or multiple single threads one at a time. So for testing running components in MTA environments may appear to work just fine. However as load increases and threads get re-used by ASP.NET COM objects will end up getting created on multiple different threads. This can result in crashes or hangs, or data corruption in the STA components which store their state in thread local storage on the STA thread. If threads overlap this global store can easily get corrupted which in turn causes problems. STA ensures that any COM object instance loaded always stays on the same thread it was instantiated on. What about COM+? COM+ is supposed to address the problem of STA in MTA applications by providing an abstraction with it's own thread pool manager for COM objects. It steps in to the COM instantiation pipeline and hands out COM instances from its own internally maintained STA Thread pool. This guarantees that the COM instantiation threads are STA threads if using STA components. COM+ works, but in my experience the technology is very, very slow for STA components. It adds a ton of overhead and reduces COM performance noticably in load tests in IIS. COM+ can make sense in some situations but for Web apps with STA components it falls short. In addition there's also the need to ensure that COM+ is set up and configured on the target machine and the fact that components have to be registered in COM+. COM+ also keeps components up at all times, so if a component needs to be replaced the COM+ package needs to be unloaded (same is true for IIS hosted components but it's more common to manage that). COM+ is an option for well established components, but native STA support tends to provide better performance and more consistent usability, IMHO. STA for non supporting ASP.NET Technologies As mentioned above only WebForms supports STA natively. However, by utilizing the WebForms ASP.NET Page handler internally it's actually possible to trick various other ASP.NET technologies and let them work with STA components. This is ugly but I've used each of these in various applications and I've had minimal problems making them work with FoxPro STA COM components which is about as dififcult as it gets for COM Interop in .NET. In this post I summarize several STA workarounds that enable you to use STA threading with these ASP.NET Technologies: ASMX Web Services ASP.NET MVC WCF Web Services ASP.NET Web API ASMX Web Services I start with classic ASP.NET ASMX Web Services because it's the easiest mechanism that allows for STA modification. It also clearly demonstrates how the WebForms STA Page Handler is the key technology to enable the various other solutions to create STA components. Essentially the way this works is to override the WebForms Page class and hijack it's init functionality for processing requests. Here's what this looks like for Web Services:namespace FoxProAspNet { public class WebServiceStaHandler : System.Web.UI.Page, IHttpAsyncHandler { protected override void OnInit(EventArgs e) { IHttpHandler handler = new WebServiceHandlerFactory().GetHandler( this.Context, this.Context.Request.HttpMethod, this.Context.Request.FilePath, this.Context.Request.PhysicalPath); handler.ProcessRequest(this.Context); this.Context.ApplicationInstance.CompleteRequest(); } public IAsyncResult BeginProcessRequest( HttpContext context, AsyncCallback cb, object extraData) { return this.AspCompatBeginProcessRequest(context, cb, extraData); } public void EndProcessRequest(IAsyncResult result) { this.AspCompatEndProcessRequest(result); } } public class AspCompatWebServiceStaHandlerWithSessionState : WebServiceStaHandler, IRequiresSessionState { } } This class overrides the ASP.NET WebForms Page class which has a little known AspCompatBeginProcessRequest() and AspCompatEndProcessRequest() method that is responsible for providing the WebForms ASPCOMPAT functionality. These methods handle routing requests to STA threads. Note there are two classes - one that includes session state and one that does not. If you plan on using ASP.NET Session state use the latter class, otherwise stick to the former. This maps to the EnableSessionState page setting in WebForms. This class simply hooks into this functionality by overriding the BeginProcessRequest and EndProcessRequest methods and always forcing it into the AspCompat methods. The way this works is that BeginProcessRequest() fires first to set up the threads and starts intializing the handler. As part of that process the OnInit() method is fired which is now already running on an STA thread. The code then creates an instance of the actual WebService handler factory and calls its ProcessRequest method to start executing which generates the Web Service result. Immediately after ProcessRequest the request is stopped with Application.CompletRequest() which ensures that the rest of the Page handler logic doesn't fire. This means that even though the fairly heavy Page class is overridden here, it doesn't end up executing any of its internal processing which makes this code fairly efficient. In a nutshell, we're highjacking the Page HttpHandler and forcing it to process the WebService process handler in the context of the AspCompat handler behavior. Hooking up the Handler Because the above is an HttpHandler implementation you need to hook up the custom handler and replace the standard ASMX handler. To do this you need to modify the web.config file (here for IIS 7 and IIS Express): <configuration> <system.webServer> <handlers> <remove name="WebServiceHandlerFactory-Integrated-4.0" /> <add name="Asmx STA Web Service Handler" path="*.asmx" verb="*" type="FoxProAspNet.WebServiceStaHandler" precondition="integrated"/> </handlers> </system.webServer> </configuration> (Note: The name for the WebServiceHandlerFactory-Integrated-4.0 might be slightly different depending on your server version. Check the IIS Handler configuration in the IIS Management Console for the exact name or simply remove the handler from the list there which will propagate to your web.config). For IIS 5 & 6 (Windows XP/2003) or the Visual Studio Web Server use:<configuration> <system.web> <httpHandlers> <remove path="*.asmx" verb="*" /> <add path="*.asmx" verb="*" type="FoxProAspNet.WebServiceStaHandler" /> </httpHandlers> </system.web></configuration> To test, create a new ASMX Web Service and create a method like this: [WebService(Namespace = "http://foxaspnet.org/")] [WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)] public class FoxWebService : System.Web.Services.WebService { [WebMethod] public string HelloWorld() { return "Hello World. Threading mode is: " + System.Threading.Thread.CurrentThread.GetApartmentState(); } } Run this before you put in the web.config configuration changes and you should get: Hello World. Threading mode is: MTA Then put the handler mapping into Web.config and you should see: Hello World. Threading mode is: STA And you're on your way to using STA COM components. It's a hack but it works well! I've used this with several high volume Web Service installations with various customers and it's been fast and reliable. ASP.NET MVC ASP.NET MVC has quickly become the most popular ASP.NET technology, replacing WebForms for creating HTML output. MVC is more complex to get started with, but once you understand the basic structure of how requests flow through the MVC pipeline it's easy to use and amazingly flexible in manipulating HTML requests. In addition, MVC has great support for non-HTML output sources like JSON and XML, making it an excellent choice for AJAX requests without any additional tools. Unlike WebForms ASP.NET MVC doesn't support STA threads natively and so some trickery is needed to make it work with STA threads as well. MVC gets its handler implementation through custom route handlers using ASP.NET's built in routing semantics. To work in an STA handler requires working in the Page Handler as part of the Route Handler implementation. As with the Web Service handler the first step is to create a custom HttpHandler that can instantiate an MVC request pipeline properly:public class MvcStaThreadHttpAsyncHandler : Page, IHttpAsyncHandler, IRequiresSessionState { private RequestContext _requestContext; public MvcStaThreadHttpAsyncHandler(RequestContext requestContext) { if (requestContext == null) throw new ArgumentNullException("requestContext"); _requestContext = requestContext; } public IAsyncResult BeginProcessRequest(HttpContext context, AsyncCallback cb, object extraData) { return this.AspCompatBeginProcessRequest(context, cb, extraData); } protected override void OnInit(EventArgs e) { var controllerName = _requestContext.RouteData.GetRequiredString("controller"); var controllerFactory = ControllerBuilder.Current.GetControllerFactory(); var controller = controllerFactory.CreateController(_requestContext, controllerName); if (controller == null) throw new InvalidOperationException("Could not find controller: " + controllerName); try { controller.Execute(_requestContext); } finally { controllerFactory.ReleaseController(controller); } this.Context.ApplicationInstance.CompleteRequest(); } public void EndProcessRequest(IAsyncResult result) { this.AspCompatEndProcessRequest(result); } public override void ProcessRequest(HttpContext httpContext) { throw new NotSupportedException("STAThreadRouteHandler does not support ProcessRequest called (only BeginProcessRequest)"); } } This handler code figures out which controller to load and then executes the controller. MVC internally provides the information needed to route to the appropriate method and pass the right parameters. Like the Web Service handler the logic occurs in the OnInit() and performs all the processing in that part of the request. Next, we need a RouteHandler that can actually pick up this handler. Unlike the Web Service handler where we simply registered the handler, MVC requires a RouteHandler to pick up the handler. RouteHandlers look at the URL's path and based on that decide on what handler to invoke. The route handler is pretty simple - all it does is load our custom handler: public class MvcStaThreadRouteHandler : IRouteHandler { public IHttpHandler GetHttpHandler(RequestContext requestContext) { if (requestContext == null) throw new ArgumentNullException("requestContext"); return new MvcStaThreadHttpAsyncHandler(requestContext); } } At this point you can instantiate this route handler and force STA requests to MVC by specifying a route. The following sets up the ASP.NET Default Route:Route mvcRoute = new Route("{controller}/{action}/{id}", new RouteValueDictionary( new { controller = "Home", action = "Index", id = UrlParameter.Optional }), new MvcStaThreadRouteHandler()); RouteTable.Routes.Add(mvcRoute);   To make this code a little easier to work with and mimic the behavior of the routes.MapRoute() functionality extension method that MVC provides, here is an extension method for MapMvcStaRoute(): public static class RouteCollectionExtensions { public static void MapMvcStaRoute(this RouteCollection routeTable, string name, string url, object defaults = null) { Route mvcRoute = new Route(url, new RouteValueDictionary(defaults), new MvcStaThreadRouteHandler()); RouteTable.Routes.Add(mvcRoute); } } With this the syntax to add  route becomes a little easier and matches the MapRoute() method:RouteTable.Routes.MapMvcStaRoute( name: "Default", url: "{controller}/{action}/{id}", defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional } ); The nice thing about this route handler, STA Handler and extension method is that it's fully self contained. You can put all three into a single class file and stick it into your Web app, and then simply call MapMvcStaRoute() and it just works. Easy! To see whether this works create an MVC controller like this: public class ThreadTestController : Controller { public string ThreadingMode() { return Thread.CurrentThread.GetApartmentState().ToString(); } } Try this test both with only the MapRoute() hookup in the RouteConfiguration in which case you should get MTA as the value. Then change the MapRoute() call to MapMvcStaRoute() leaving all the parameters the same and re-run the request. You now should see STA as the result. You're on your way using STA COM components reliably in ASP.NET MVC. WCF Web Services running through IIS WCF Web Services provide a more robust and wider range of services for Web Services. You can use WCF over HTTP, TCP, and Pipes, and WCF services support WS* secure services. There are many features in WCF that go way beyond what ASMX can do. But it's also a bit more complex than ASMX. As a basic rule if you need to serve straight SOAP Services over HTTP I 'd recommend sticking with the simpler ASMX services especially if COM is involved. If you need WS* support or want to serve data over non-HTTP protocols then WCF makes more sense. WCF is not my forte but I found a solution from Scott Seely on his blog that describes the progress and that seems to work well. I'm copying his code below so this STA information is all in one place and quickly explain. Scott's code basically works by creating a custom OperationBehavior which can be specified via an [STAOperation] attribute on every method. Using his attribute you end up with a class (or Interface if you separate the contract and class) that looks like this: [ServiceContract] public class WcfService { [OperationContract] public string HelloWorldMta() { return Thread.CurrentThread.GetApartmentState().ToString(); } // Make sure you use this custom STAOperationBehavior // attribute to force STA operation of service methods [STAOperationBehavior] [OperationContract] public string HelloWorldSta() { return Thread.CurrentThread.GetApartmentState().ToString(); } } Pretty straight forward. The latter method returns STA while the former returns MTA. To make STA work every method needs to be marked up. The implementation consists of the attribute and OperationInvoker implementation. Here are the two classes required to make this work from Scott's post:public class STAOperationBehaviorAttribute : Attribute, IOperationBehavior { public void AddBindingParameters(OperationDescription operationDescription, System.ServiceModel.Channels.BindingParameterCollection bindingParameters) { } public void ApplyClientBehavior(OperationDescription operationDescription, System.ServiceModel.Dispatcher.ClientOperation clientOperation) { // If this is applied on the client, well, it just doesn’t make sense. // Don’t throw in case this attribute was applied on the contract // instead of the implementation. } public void ApplyDispatchBehavior(OperationDescription operationDescription, System.ServiceModel.Dispatcher.DispatchOperation dispatchOperation) { // Change the IOperationInvoker for this operation. dispatchOperation.Invoker = new STAOperationInvoker(dispatchOperation.Invoker); } public void Validate(OperationDescription operationDescription) { if (operationDescription.SyncMethod == null) { throw new InvalidOperationException("The STAOperationBehaviorAttribute " + "only works for synchronous method invocations."); } } } public class STAOperationInvoker : IOperationInvoker { IOperationInvoker _innerInvoker; public STAOperationInvoker(IOperationInvoker invoker) { _innerInvoker = invoker; } public object[] AllocateInputs() { return _innerInvoker.AllocateInputs(); } public object Invoke(object instance, object[] inputs, out object[] outputs) { // Create a new, STA thread object[] staOutputs = null; object retval = null; Thread thread = new Thread( delegate() { retval = _innerInvoker.Invoke(instance, inputs, out staOutputs); }); thread.SetApartmentState(ApartmentState.STA); thread.Start(); thread.Join(); outputs = staOutputs; return retval; } public IAsyncResult InvokeBegin(object instance, object[] inputs, AsyncCallback callback, object state) { // We don’t handle async… throw new NotImplementedException(); } public object InvokeEnd(object instance, out object[] outputs, IAsyncResult result) { // We don’t handle async… throw new NotImplementedException(); } public bool IsSynchronous { get { return true; } } } The key in this setup is the Invoker and the Invoke method which creates a new thread and then fires the request on this new thread. Because this approach creates a new thread for every request it's not super efficient. There's a bunch of overhead involved in creating the thread and throwing it away after each thread, but it'll work for low volume requests and insure each thread runs in STA mode. If better performance is required it would be useful to create a custom thread manager that can pool a number of STA threads and hand off threads as needed rather than creating new threads on every request. If your Web Service needs are simple and you need only to serve standard SOAP 1.x requests, I would recommend sticking with ASMX services. It's easier to set up and work with and for STA component use it'll be significantly better performing since ASP.NET manages the STA thread pool for you rather than firing new threads for each request. One nice thing about Scotts code is though that it works in any WCF environment including self hosting. It has no dependency on ASP.NET or WebForms for that matter. STA - If you must STA components are a  pain in the ass and thankfully there isn't too much stuff out there anymore that requires it. But when you need it and you need to access STA functionality from .NET at least there are a few options available to make it happen. Each of these solutions is a bit hacky, but they work - I've used all of them in production with good results with FoxPro components. I hope compiling all of these in one place here makes it STA consumption a little bit easier. I feel your pain :-) Resources Download STA Handler Code Examples Scott Seely's original STA WCF OperationBehavior Article© Rick Strahl, West Wind Technologies, 2005-2012Posted in FoxPro   ASP.NET  .NET  COM   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • An Introduction to Meteor

    - by Stephen.Walther
    The goal of this blog post is to give you a brief introduction to Meteor which is a framework for building Single Page Apps. In this blog entry, I provide a walkthrough of building a simple Movie database app. What is special about Meteor? Meteor has two jaw-dropping features: Live HTML – If you make any changes to the HTML, CSS, JavaScript, or data on the server then every client shows the changes automatically without a browser refresh. For example, if you change the background color of a page to yellow then every open browser will show the new yellow background color without a refresh. Or, if you add a new movie to a collection of movies, then every open browser will display the new movie automatically. With Live HTML, users no longer need a refresh button. Changes to an application happen everywhere automatically without any effort. The Meteor framework handles all of the messy details of keeping all of the clients in sync with the server for you. Latency Compensation – When you modify data on the client, these modifications appear as if they happened on the server without any delay. For example, if you create a new movie then the movie appears instantly. However, that is all an illusion. In the background, Meteor updates the database with the new movie. If, for whatever reason, the movie cannot be added to the database then Meteor removes the movie from the client automatically. Latency compensation is extremely important for creating a responsive web application. You want the user to be able to make instant modifications in the browser and the framework to handle the details of updating the database without slowing down the user. Installing Meteor Meteor is licensed under the open-source MIT license and you can start building production apps with the framework right now. Be warned that Meteor is still in the “early preview” stage. It has not reached a 1.0 release. According to the Meteor FAQ, Meteor will reach version 1.0 in “More than a month, less than a year.” Don’t be scared away by that. You should be aware that, unlike most open source projects, Meteor has financial backing. The Meteor project received an $11.2 million round of financing from Andreessen Horowitz. So, it would be a good bet that this project will reach the 1.0 mark. And, if it doesn’t, the framework as it exists right now is still very powerful. Meteor runs on top of Node.js. You write Meteor apps by writing JavaScript which runs both on the client and on the server. You can build Meteor apps on Windows, Mac, or Linux (Although the support for Windows is still officially unofficial). If you want to install Meteor on Windows then download the MSI from the following URL: http://win.meteor.com/ If you want to install Meteor on Mac/Linux then run the following CURL command from your terminal: curl https://install.meteor.com | /bin/sh Meteor will install all of its dependencies automatically including Node.js. However, I recommend that you install Node.js before installing Meteor by installing Node.js from the following address: http://nodejs.org/ If you let Meteor install Node.js then Meteor won’t install NPM which is the standard package manager for Node.js. If you install Node.js and then you install Meteor then you get NPM automatically. Creating a New Meteor App To get a sense of how Meteor works, I am going to walk through the steps required to create a simple Movie database app. Our app will display a list of movies and contain a form for creating a new movie. The first thing that we need to do is create our new Meteor app. Open a command prompt/terminal window and execute the following command: Meteor create MovieApp After you execute this command, you should see something like the following: Follow the instructions: execute cd MovieApp to change to your MovieApp directory, and run the meteor command. Executing the meteor command starts Meteor on port 3000. Open up your favorite web browser and navigate to http://localhost:3000 and you should see the default Meteor Hello World page: Open up your favorite development environment to see what the Meteor app looks like. Open the MovieApp folder which we just created. Here’s what the MovieApp looks like in Visual Studio 2012: Notice that our MovieApp contains three files named MovieApp.css, MovieApp.html, and MovieApp.js. In other words, it contains a Cascading Style Sheet file, an HTML file, and a JavaScript file. Just for fun, let’s see how the Live HTML feature works. Open up multiple browsers and point each browser at http://localhost:3000. Now, open the MovieApp.html page and modify the text “Hello World!” to “Hello Cruel World!” and save the change. The text in all of the browsers should update automatically without a browser refresh. Pretty amazing, right? Controlling Where JavaScript Executes You write a Meteor app using JavaScript. Some of the JavaScript executes on the client (the browser) and some of the JavaScript executes on the server and some of the JavaScript executes in both places. For a super simple app, you can use the Meteor.isServer and Meteor.isClient properties to control where your JavaScript code executes. For example, the following JavaScript contains a section of code which executes on the server and a section of code which executes in the browser: if (Meteor.isClient) { console.log("Hello Browser!"); } if (Meteor.isServer) { console.log("Hello Server!"); } console.log("Hello Browser and Server!"); When you run the app, the message “Hello Browser!” is written to the browser JavaScript console. The message “Hello Server!” is written to the command/terminal window where you ran Meteor. Finally, the message “Hello Browser and Server!” is execute on both the browser and server and the message appears in both places. For simple apps, using Meteor.isClient and Meteor.isServer to control where JavaScript executes is fine. For more complex apps, you should create separate folders for your server and client code. Here are the folders which you can use in a Meteor app: · client – This folder contains any JavaScript which executes only on the client. · server – This folder contains any JavaScript which executes only on the server. · common – This folder contains any JavaScript code which executes on both the client and server. · lib – This folder contains any JavaScript files which you want to execute before any other JavaScript files. · public – This folder contains static application assets such as images. For the Movie App, we need the client, server, and common folders. Delete the existing MovieApp.js, MovieApp.html, and MovieApp.css files. We will create new files in the right locations later in this walkthrough. Combining HTML, CSS, and JavaScript Files Meteor combines all of your JavaScript files, and all of your Cascading Style Sheet files, and all of your HTML files automatically. If you want to create one humongous JavaScript file which contains all of the code for your app then that is your business. However, if you want to build a more maintainable application, then you should break your JavaScript files into many separate JavaScript files and let Meteor combine them for you. Meteor also combines all of your HTML files into a single file. HTML files are allowed to have the following top-level elements: <head> — All <head> files are combined into a single <head> and served with the initial page load. <body> — All <body> files are combined into a single <body> and served with the initial page load. <template> — All <template> files are compiled into JavaScript templates. Because you are creating a single page app, a Meteor app typically will contain a single HTML file for the <head> and <body> content. However, a Meteor app typically will contain several template files. In other words, all of the interesting stuff happens within the <template> files. Displaying a List of Movies Let me start building the Movie App by displaying a list of movies. In order to display a list of movies, we need to create the following four files: · client\movies.html – Contains the HTML for the <head> and <body> of the page for the Movie app. · client\moviesTemplate.html – Contains the HTML template for displaying the list of movies. · client\movies.js – Contains the JavaScript for supplying data to the moviesTemplate. · server\movies.js – Contains the JavaScript for seeding the database with movies. After you create these files, your folder structure should looks like this: Here’s what the client\movies.html file looks like: <head> <title>My Movie App</title> </head> <body> <h1>Movies</h1> {{> moviesTemplate }} </body>   Notice that it contains <head> and <body> top-level elements. The <body> element includes the moviesTemplate with the syntax {{> moviesTemplate }}. The moviesTemplate is defined in the client/moviesTemplate.html file: <template name="moviesTemplate"> <ul> {{#each movies}} <li> {{title}} </li> {{/each}} </ul> </template> By default, Meteor uses the Handlebars templating library. In the moviesTemplate above, Handlebars is used to loop through each of the movies using {{#each}}…{{/each}} and display the title for each movie using {{title}}. The client\movies.js JavaScript file is used to bind the moviesTemplate to the Movies collection on the client. Here’s what this JavaScript file looks like: // Declare client Movies collection Movies = new Meteor.Collection("movies"); // Bind moviesTemplate to Movies collection Template.moviesTemplate.movies = function () { return Movies.find(); }; The Movies collection is a client-side proxy for the server-side Movies database collection. Whenever you want to interact with the collection of Movies stored in the database, you use the Movies collection instead of communicating back to the server. The moviesTemplate is bound to the Movies collection by assigning a function to the Template.moviesTemplate.movies property. The function simply returns all of the movies from the Movies collection. The final file which we need is the server-side server\movies.js file: // Declare server Movies collection Movies = new Meteor.Collection("movies"); // Seed the movie database with a few movies Meteor.startup(function () { if (Movies.find().count() == 0) { Movies.insert({ title: "Star Wars", director: "Lucas" }); Movies.insert({ title: "Memento", director: "Nolan" }); Movies.insert({ title: "King Kong", director: "Jackson" }); } }); The server\movies.js file does two things. First, it declares the server-side Meteor Movies collection. When you declare a server-side Meteor collection, a collection is created in the MongoDB database associated with your Meteor app automatically (Meteor uses MongoDB as its database automatically). Second, the server\movies.js file seeds the Movies collection (MongoDB collection) with three movies. Seeding the database gives us some movies to look at when we open the Movies app in a browser. Creating New Movies Let me modify the Movies Database App so that we can add new movies to the database of movies. First, I need to create a new template file – named client\movieForm.html – which contains an HTML form for creating a new movie: <template name="movieForm"> <fieldset> <legend>Add New Movie</legend> <form> <div> <label> Title: <input id="title" /> </label> </div> <div> <label> Director: <input id="director" /> </label> </div> <div> <input type="submit" value="Add Movie" /> </div> </form> </fieldset> </template> In order for the new form to show up, I need to modify the client\movies.html file to include the movieForm.html template. Notice that I added {{> movieForm }} to the client\movies.html file: <head> <title>My Movie App</title> </head> <body> <h1>Movies</h1> {{> moviesTemplate }} {{> movieForm }} </body> After I make these modifications, our Movie app will display the form: The next step is to handle the submit event for the movie form. Below, I’ve modified the client\movies.js file so that it contains a handler for the submit event raised when you submit the form contained in the movieForm.html template: // Declare client Movies collection Movies = new Meteor.Collection("movies"); // Bind moviesTemplate to Movies collection Template.moviesTemplate.movies = function () { return Movies.find(); }; // Handle movieForm events Template.movieForm.events = { 'submit': function (e, tmpl) { // Don't postback e.preventDefault(); // create the new movie var newMovie = { title: tmpl.find("#title").value, director: tmpl.find("#director").value }; // add the movie to the db Movies.insert(newMovie); } }; The Template.movieForm.events property contains an event map which maps event names to handlers. In this case, I am mapping the form submit event to an anonymous function which handles the event. In the event handler, I am first preventing a postback by calling e.preventDefault(). This is a single page app, no postbacks are allowed! Next, I am grabbing the new movie from the HTML form. I’m taking advantage of the template find() method to retrieve the form field values. Finally, I am calling Movies.insert() to insert the new movie into the Movies collection. Here, I am explicitly inserting the new movie into the client-side Movies collection. Meteor inserts the new movie into the server-side Movies collection behind the scenes. When Meteor inserts the movie into the server-side collection, the new movie is added to the MongoDB database associated with the Movies app automatically. If server-side insertion fails for whatever reasons – for example, your internet connection is lost – then Meteor will remove the movie from the client-side Movies collection automatically. In other words, Meteor takes care of keeping the client Movies collection and the server Movies collection in sync. If you open multiple browsers, and add movies, then you should notice that all of the movies appear on all of the open browser automatically. You don’t need to refresh individual browsers to update the client-side Movies collection. Meteor keeps everything synchronized between the browsers and server for you. Removing the Insecure Module To make it easier to develop and debug a new Meteor app, by default, you can modify the database directly from the client. For example, you can delete all of the data in the database by opening up your browser console window and executing multiple Movies.remove() commands. Obviously, enabling anyone to modify your database from the browser is not a good idea in a production application. Before you make a Meteor app public, you should first run the meteor remove insecure command from a command/terminal window: Running meteor remove insecure removes the insecure package from the Movie app. Unfortunately, it also breaks our Movie app. We’ll get an “Access denied” error in our browser console whenever we try to insert a new movie. No worries. I’ll fix this issue in the next section. Creating Meteor Methods By taking advantage of Meteor Methods, you can create methods which can be invoked on both the client and the server. By taking advantage of Meteor Methods you can: 1. Perform form validation on both the client and the server. For example, even if an evil hacker bypasses your client code, you can still prevent the hacker from submitting an invalid value for a form field by enforcing validation on the server. 2. Simulate database operations on the client but actually perform the operations on the server. Let me show you how we can modify our Movie app so it uses Meteor Methods to insert a new movie. First, we need to create a new file named common\methods.js which contains the definition of our Meteor Methods: Meteor.methods({ addMovie: function (newMovie) { // Perform form validation if (newMovie.title == "") { throw new Meteor.Error(413, "Missing title!"); } if (newMovie.director == "") { throw new Meteor.Error(413, "Missing director!"); } // Insert movie (simulate on client, do it on server) return Movies.insert(newMovie); } }); The addMovie() method is called from both the client and the server. This method does two things. First, it performs some basic validation. If you don’t enter a title or you don’t enter a director then an error is thrown. Second, the addMovie() method inserts the new movie into the Movies collection. When called on the client, inserting the new movie into the Movies collection just updates the collection. When called on the server, inserting the new movie into the Movies collection causes the database (MongoDB) to be updated with the new movie. You must add the common\methods.js file to the common folder so it will get executed on both the client and the server. Our folder structure now looks like this: We actually call the addMovie() method within our client code in the client\movies.js file. Here’s what the updated file looks like: // Declare client Movies collection Movies = new Meteor.Collection("movies"); // Bind moviesTemplate to Movies collection Template.moviesTemplate.movies = function () { return Movies.find(); }; // Handle movieForm events Template.movieForm.events = { 'submit': function (e, tmpl) { // Don't postback e.preventDefault(); // create the new movie var newMovie = { title: tmpl.find("#title").value, director: tmpl.find("#director").value }; // add the movie to the db Meteor.call( "addMovie", newMovie, function (err, result) { if (err) { alert("Could not add movie " + err.reason); } } ); } }; The addMovie() method is called – on both the client and the server – by calling the Meteor.call() method. This method accepts the following parameters: · The string name of the method to call. · The data to pass to the method (You can actually pass multiple params for the data if you like). · A callback function to invoke after the method completes. In the JavaScript code above, the addMovie() method is called with the new movie retrieved from the HTML form. The callback checks for an error. If there is an error then the error reason is displayed in an alert (please don’t use alerts for validation errors in a production app because they are ugly!). Summary The goal of this blog post was to provide you with a brief walk through of a simple Meteor app. I showed you how you can create a simple Movie Database app which enables you to display a list of movies and create new movies. I also explained why it is important to remove the Meteor insecure package from a production app. I showed you how to use Meteor Methods to insert data into the database instead of doing it directly from the client. I’m very impressed with the Meteor framework. The support for Live HTML and Latency Compensation are required features for many real world Single Page Apps but implementing these features by hand is not easy. Meteor makes it easy.

    Read the article

  • Diving into OpenStack Network Architecture - Part 1

    - by Ronen Kofman
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} rkofman Normal rkofman 83 3045 2014-05-23T21:11:00Z 2014-05-27T06:58:00Z 3 1883 10739 Oracle Corporation 89 25 12597 12.00 140 Clean Clean false false false false EN-US X-NONE HE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:Arial; mso-bidi-theme-font:minor-bidi; mso-bidi-language:AR-SA;} Before we begin OpenStack networking has very powerful capabilities but at the same time it is quite complicated. In this blog series we will review an existing OpenStack setup using the Oracle OpenStack Tech Preview and explain the different network components through use cases and examples. The goal is to show how the different pieces come together and provide a bigger picture view of the network architecture in OpenStack. This can be very helpful to users making their first steps in OpenStack or anyone wishes to understand how networking works in this environment.  We will go through the basics first and build the examples as we go. According to the recent Icehouse user survey and the one before it, Neutron with Open vSwitch plug-in is the most widely used network setup both in production and in POCs (in terms of number of customers) and so in this blog series we will analyze this specific OpenStack networking setup. As we know there are many options to setup OpenStack networking and while Neturon + Open vSwitch is the most popular setup there is no claim that it is either best or the most efficient option. Neutron + Open vSwitch is an example, one which provides a good starting point for anyone interested in understanding OpenStack networking. Even if you are using different kind of network setup such as different Neutron plug-in or even not using Neutron at all this will still be a good starting point to understand the network architecture in OpenStack. The setup we are using for the examples is the one used in the Oracle OpenStack Tech Preview. Installing it is simple and it would be helpful to have it as reference. In this setup we use eth2 on all servers for VM network, all VM traffic will be flowing through this interface.The Oracle OpenStack Tech Preview is using VLANs for L2 isolation to provide tenant and network isolation. The following diagram shows how we have configured our deployment: This first post is a bit long and will focus on some basic concepts in OpenStack networking. The components we will be discussing are Open vSwitch, network namespaces, Linux bridge and veth pairs. Note that this is not meant to be a comprehensive review of these components, it is meant to describe the component as much as needed to understand OpenStack network architecture. All the components described here can be further explored using other resources. Open vSwitch (OVS) In the Oracle OpenStack Tech Preview OVS is used to connect virtual machines to the physical port (in our case eth2) as shown in the deployment diagram. OVS contains bridges and ports, the OVS bridges are different from the Linux bridge (controlled by the brctl command) which are also used in this setup. To get started let’s view the OVS structure, use the following command: # ovs-vsctl show 7ec51567-ab42-49e8-906d-b854309c9edf     Bridge br-int         Port br-int             Interface br-int type: internal         Port "int-br-eth2"             Interface "int-br-eth2"     Bridge "br-eth2"         Port "br-eth2"             Interface "br-eth2" type: internal         Port "eth2"             Interface "eth2"         Port "phy-br-eth2"             Interface "phy-br-eth2" ovs_version: "1.11.0" We see a standard post deployment OVS on a compute node with two bridges and several ports hanging off of each of them. The example above is a compute node without any VMs, we can see that the physical port eth2 is connected to a bridge called “br-eth2”. We also see two ports "int-br-eth2" and "phy-br-eth2" which are actually a veth pair and form virtual wire between the two bridges, veth pairs are discussed later in this post. When a virtual machine is created a port is created on one the br-int bridge and this port is eventually connected to the virtual machine (we will discuss the exact connectivity later in the series). Here is how OVS looks after a VM was launched: # ovs-vsctl show efd98c87-dc62-422d-8f73-a68c2a14e73d     Bridge br-int         Port "int-br-eth2"             Interface "int-br-eth2"         Port br-int             Interface br-int type: internal         Port "qvocb64ea96-9f" tag: 1             Interface "qvocb64ea96-9f"     Bridge "br-eth2"         Port "phy-br-eth2"             Interface "phy-br-eth2"         Port "br-eth2"             Interface "br-eth2" type: internal         Port "eth2"             Interface "eth2" ovs_version: "1.11.0" Bridge "br-int" now has a new port "qvocb64ea96-9f" which connects to the VM and tagged with VLAN 1. Every VM which will be launched will add a port on the “br-int” bridge for every network interface the VM has. Another useful command on OVS is dump-flows for example: # ovs-ofctl dump-flows br-int NXST_FLOW reply (xid=0x4): cookie=0x0, duration=735.544s, table=0, n_packets=70, n_bytes=9976, idle_age=17, priority=3,in_port=1,dl_vlan=1000 actions=mod_vlan_vid:1,NORMAL cookie=0x0, duration=76679.786s, table=0, n_packets=0, n_bytes=0, idle_age=65534, hard_age=65534, priority=2,in_port=1 actions=drop cookie=0x0, duration=76681.36s, table=0, n_packets=68, n_bytes=7950, idle_age=17, hard_age=65534, priority=1 actions=NORMAL As we see the port which is connected to the VM has the VLAN tag 1. However the port on the VM network (eth2) will be using tag 1000. OVS is modifying the vlan as the packet flow from the VM to the physical interface. In OpenStack the Open vSwitch agent takes care of programming the flows in Open vSwitch so the users do not have to deal with this at all. If you wish to learn more about how to program the Open vSwitch you can read more about it at http://openvswitch.org looking at the documentation describing the ovs-ofctl command. Network Namespaces (netns) Network namespaces is a very cool Linux feature can be used for many purposes and is heavily used in OpenStack networking. Network namespaces are isolated containers which can hold a network configuration and is not seen from outside of the namespace. A network namespace can be used to encapsulate specific network functionality or provide a network service in isolation as well as simply help to organize a complicated network setup. Using the Oracle OpenStack Tech Preview we are using the latest Unbreakable Enterprise Kernel R3 (UEK3), this kernel provides a complete support for netns. Let's see how namespaces work through couple of examples to control network namespaces we use the ip netns command: Defining a new namespace: # ip netns add my-ns # ip netns list my-ns As mentioned the namespace is an isolated container, we can perform all the normal actions in the namespace context using the exec command for example running the ifconfig command: # ip netns exec my-ns ifconfig -a lo        Link encap:Local Loopback           LOOPBACK  MTU:16436 Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b) We can run every command in the namespace context, this is especially useful for debug using tcpdump command, we can ping or ssh or define iptables all within the namespace. Connecting the namespace to the outside world: There are various ways to connect into a namespaces and between namespaces we will focus on how this is done in OpenStack. OpenStack uses a combination of Open vSwitch and network namespaces. OVS defines the interfaces and then we can add those interfaces to namespace. So first let's add a bridge to OVS: # ovs-vsctl add-br my-bridge Now let's add a port on the OVS and make it internal: # ovs-vsctl add-port my-bridge my-port # ovs-vsctl set Interface my-port type=internal And let's connect it into the namespace: # ip link set my-port netns my-ns Looking inside the namespace: # ip netns exec my-ns ifconfig -a lo        Link encap:Local Loopback           LOOPBACK  MTU:65536 Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b) my-port   Link encap:Ethernet HWaddr 22:04:45:E2:85:21           BROADCAST  MTU:1500 Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b) Now we can add more ports to the OVS bridge and connect it to other namespaces or other device like physical interfaces. Neutron is using network namespaces to implement network services such as DCHP, routing, gateway, firewall, load balance and more. In the next post we will go into this in further details. Linux Bridge and veth pairs Linux bridge is used to connect the port from OVS to the VM. Every port goes from the OVS bridge to a Linux bridge and from there to the VM. The reason for using regular Linux bridges is for security groups’ enforcement. Security groups are implemented using iptables and iptables can only be applied to Linux bridges and not to OVS bridges. Veth pairs are used extensively throughout the network setup in OpenStack and are also a good tool to debug a network problem. Veth pairs are simply a virtual wire and so veths always come in pairs. Typically one side of the veth pair will connect to a bridge and the other side to another bridge or simply left as a usable interface. In this example we will create some veth pairs, connect them to bridges and test connectivity. This example is using regular Linux server and not an OpenStack node: Creating a veth pair, note that we define names for both ends: # ip link add veth0 type veth peer name veth1 # ifconfig -a . . veth0     Link encap:Ethernet HWaddr 5E:2C:E6:03:D0:17           BROADCAST MULTICAST  MTU:1500 Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b) veth1     Link encap:Ethernet HWaddr E6:B6:E2:6D:42:B8           BROADCAST MULTICAST  MTU:1500 Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b) . . To make the example more meaningful this we will create the following setup: veth0 => veth1 => br-eth3 => eth3 ======> eth2 on another Linux server br-eth3 – a regular Linux bridge which will be connected to veth1 and eth3 eth3 – a physical interface with no IP on it, connected to a private network eth2 – a physical interface on the remote Linux box connected to the private network and configured with the IP of 50.50.50.1 Once we create the setup we will ping 50.50.50.1 (the remote IP) through veth0 to test that the connection is up: # brctl addbr br-eth3 # brctl addif br-eth3 eth3 # brctl addif br-eth3 veth1 # brctl show bridge name     bridge id               STP enabled     interfaces br-eth3         8000.00505682e7f6       no              eth3                                                         veth1 # ifconfig veth0 50.50.50.50 # ping -I veth0 50.50.50.51 PING 50.50.50.51 (50.50.50.51) from 50.50.50.50 veth0: 56(84) bytes of data. 64 bytes from 50.50.50.51: icmp_seq=1 ttl=64 time=0.454 ms 64 bytes from 50.50.50.51: icmp_seq=2 ttl=64 time=0.298 ms When the naming is not as obvious as the previous example and we don't know who are the paired veth interfaces we can use the ethtool command to figure this out. The ethtool command returns an index we can look up using ip link command, for example: # ethtool -S veth1 NIC statistics: peer_ifindex: 12 # ip link . . 12: veth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 Summary That’s all for now, we quickly reviewed OVS, network namespaces, Linux bridges and veth pairs. These components are heavily used in the OpenStack network architecture we are exploring and understanding them well will be very useful when reviewing the different use cases. In the next post we will look at how the OpenStack network is laid out connecting the virtual machines to each other and to the external world. @RonenKofman

    Read the article

  • Extending NerdDinner: Adding Geolocated Flair

    - by Jon Galloway
    NerdDinner is a website with the audacious goal of “Organizing the world’s nerds and helping them eat in packs.” Because nerds aren’t likely to socialize with others unless a website tells them to do it. Scott Hanselman showed off a lot of the cool features we’ve added to NerdDinner lately during his popular talk at MIX10, Beyond File | New Company: From Cheesy Sample to Social Platform. Did you miss it? Go ahead and watch it, I’ll wait. One of the features we wanted to add was flair. You know about flair, right? It’s a way to let folks who like your site show it off in their own site. For example, here’s my StackOverflow flair: Great! So how could we add some of this flair stuff to NerdDinner? What do we want to show? If we’re going to encourage our users to give up a bit of their beautiful website to show off a bit of ours, we need to think about what they’ll want to show. For instance, my StackOverflow flair is all about me, not StackOverflow. So how will this apply to NerdDinner? Since NerdDinner is all about organizing local dinners, in order for the flair to be useful it needs to make sense for the person viewing the web page. If someone visits from Egypt visits my blog, they should see information about NerdDinners in Egypt. That’s geolocation – localizing site content based on where the browser’s sitting, and it makes sense for flair as well as entire websites. So we’ll set up a simple little callout that prompts them to host a dinner in their area: Hopefully our flair works and there is a dinner near your viewers, so they’ll see another view which lists upcoming dinners near them: The Geolocation Part Generally website geolocation is done by mapping the requestor’s IP address to a geographic area. It’s not an exact science, but I’ve always found it to be pretty accurate. There are (at least) three ways to handle it: You pay somebody like MaxMind for a database (with regular updates) that sits on your server, and you use their API to do lookups. I used this on a pretty big project a few years ago and it worked well. You use HTML 5 Geolocation API or Google Gears or some other browser based solution. I think those are cool (I use Google Gears a lot), but they’re both in flux right now and I don’t think either has a wide enough of an install base yet to rely on them. You might want to, but I’ve heard you do all kinds of crazy stuff, and sometimes it gets you in trouble. I don’t mean talk out of line, but we all laugh behind your back a bit. But, hey, it’s up to you. It’s your flair or whatever. There are some free webservices out there that will take an IP address and give you location information. Easy, and works for everyone. That’s what we’re doing. I looked at a few different services and settled on IPInfoDB. It’s free, has a great API, and even returns JSON, which is handy for Javascript use. The IP query is pretty simple. We hit a URL like this: http://ipinfodb.com/ip_query.php?ip=74.125.45.100&timezone=false … and we get an XML response back like this… <?xml version="1.0" encoding="UTF-8"?> <Response> <Ip>74.125.45.100</Ip> <Status>OK</Status> <CountryCode>US</CountryCode> <CountryName>United States</CountryName> <RegionCode>06</RegionCode> <RegionName>California</RegionName> <City>Mountain View</City> <ZipPostalCode>94043</ZipPostalCode> <Latitude>37.4192</Latitude> <Longitude>-122.057</Longitude> </Response> So we’ll build some data transfer classes to hold the location information, like this: public class LocationInfo { public string Country { get; set; } public string RegionName { get; set; } public string City { get; set; } public string ZipPostalCode { get; set; } public LatLong Position { get; set; } } public class LatLong { public float Lat { get; set; } public float Long { get; set; } } And now hitting the service is pretty simple: public static LocationInfo HostIpToPlaceName(string ip) { string url = "http://ipinfodb.com/ip_query.php?ip={0}&timezone=false"; url = String.Format(url, ip); var result = XDocument.Load(url); var location = (from x in result.Descendants("Response") select new LocationInfo { City = (string)x.Element("City"), RegionName = (string)x.Element("RegionName"), Country = (string)x.Element("CountryName"), ZipPostalCode = (string)x.Element("CountryName"), Position = new LatLong { Lat = (float)x.Element("Latitude"), Long = (float)x.Element("Longitude") } }).First(); return location; } Getting The User’s IP Okay, but first we need the end user’s IP, and you’d think it would be as simple as reading the value from HttpContext: HttpContext.Current.Request.UserHostAddress But you’d be wrong. Sorry. UserHostAddress just wraps HttpContext.Current.Request.ServerVariables["REMOTE_ADDR"], but that doesn’t get you the IP for users behind a proxy. That’s in another header, “HTTP_X_FORWARDED_FOR". So you can either hit a wrapper and then check a header, or just check two headers. I went for uniformity: string SourceIP = string.IsNullOrEmpty(Request.ServerVariables["HTTP_X_FORWARDED_FOR"]) ? Request.ServerVariables["REMOTE_ADDR"] : Request.ServerVariables["HTTP_X_FORWARDED_FOR"]; We’re almost set to wrap this up, but first let’s talk about our views. Yes, views, because we’ll have two. Selecting the View We wanted to make it easy for people to include the flair in their sites, so we looked around at how other people were doing this. The StackOverflow folks have a pretty good flair system, which allows you to include the flair in your site as either an IFRAME reference or a Javascript include. We’ll do both. We have a ServicesController to handle use of the site information outside of NerdDinner.com, so this fits in pretty well there. We’ll be displaying the same information for both HTML and Javascript flair, so we can use one Flair controller action which will return a different view depending on the requested format. Here’s our general flow for our controller action: Get the user’s IP Translate it to a location Grab the top three upcoming dinners that are near that location Select the view based on the format (defaulted to “html”) Return a FlairViewModel which contains the list of dinners and the location information public ActionResult Flair(string format = "html") { string SourceIP = string.IsNullOrEmpty( Request.ServerVariables["HTTP_X_FORWARDED_FOR"]) ? Request.ServerVariables["REMOTE_ADDR"] : Request.ServerVariables["HTTP_X_FORWARDED_FOR"]; var location = GeolocationService.HostIpToPlaceName(SourceIP); var dinners = dinnerRepository. FindByLocation(location.Position.Lat, location.Position.Long). OrderByDescending(p => p.EventDate).Take(3); // Select the view we'll return. // Using a switch because we'll add in JSON and other formats later. string view; switch (format.ToLower()) { case "javascript": view = "JavascriptFlair"; break; default: view = "Flair"; break; } return View( view, new FlairViewModel { Dinners = dinners.ToList(), LocationName = string.IsNullOrEmpty(location.City) ? "you" : String.Format("{0}, {1}", location.City, location.RegionName) } ); } Note: I’m not in love with the logic here, but it seems like overkill to extract the switch statement away when we’ll probably just have two or three views. What do you think? The HTML View The HTML version of the view is pretty simple – the only thing of any real interest here is the use of an extension method to truncate strings that are would cause the titles to wrap. public static string Truncate(this string s, int maxLength) { if (string.IsNullOrEmpty(s) || maxLength <= 0) return string.Empty; else if (s.Length > maxLength) return s.Substring(0, maxLength) + "..."; else return s; }   So here’s how the HTML view ends up looking: <%@ Page Title="" Language="C#" Inherits="System.Web.Mvc.ViewPage<FlairViewModel>" %> <%@ Import Namespace="NerdDinner.Helpers" %> <%@ Import Namespace="NerdDinner.Models" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Nerd Dinner</title> <link href="/Content/Flair.css" rel="stylesheet" type="text/css" /> </head> <body> <div id="nd-wrapper"> <h2 id="nd-header">NerdDinner.com</h2> <div id="nd-outer"> <% if (Model.Dinners.Count == 0) { %> <div id="nd-bummer"> Looks like there's no Nerd Dinners near <%:Model.LocationName %> in the near future. Why not <a target="_blank" href="http://www.nerddinner.com/Dinners/Create">host one</a>?</div> <% } else { %> <h3> Dinners Near You</h3> <ul> <% foreach (var item in Model.Dinners) { %> <li> <%: Html.ActionLink(String.Format("{0} with {1} on {2}", item.Title.Truncate(20), item.HostedBy, item.EventDate.ToShortDateString()), "Details", "Dinners", new { id = item.DinnerID }, new { target = "_blank" })%></li> <% } %> </ul> <% } %> <div id="nd-footer"> More dinners and fun at <a target="_blank" href="http://nrddnr.com">http://nrddnr.com</a></div> </div> </div> </body> </html> You’d include this in a page using an IFRAME, like this: <IFRAME height=230 marginHeight=0 src="http://nerddinner.com/services/flair" frameBorder=0 width=160 marginWidth=0 scrolling=no></IFRAME> The Javascript view The Javascript flair is written so you can include it in a webpage with a simple script include, like this: <script type="text/javascript" src="http://nerddinner.com/services/flair?format=javascript"></script> The goal of this view is very similar to the HTML embed view, with a few exceptions: We’re creating a script element and adding it to the head of the document, which will then document.write out the content. Note that you have to consider if your users will actually have a <head> element in their documents, but for website flair use cases I think that’s a safe bet. Since the content is being added to the existing page rather than shown in an IFRAME, all links need to be absolute. That means we can’t use Html.ActionLink, since it generates relative routes. We need to escape everything since it’s being written out as strings. We need to set the content type to application/x-javascript. The easiest way to do that is to use the <%@ Page ContentType%> directive. <%@ Page Language="C#" Inherits="System.Web.Mvc.ViewPage<NerdDinner.Models.FlairViewModel>" ContentType="application/x-javascript" %> <%@ Import Namespace="NerdDinner.Helpers" %> <%@ Import Namespace="NerdDinner.Models" %> document.write('<script>var link = document.createElement(\"link\");link.href = \"http://nerddinner.com/content/Flair.css\";link.rel = \"stylesheet\";link.type = \"text/css\";var head = document.getElementsByTagName(\"head\")[0];head.appendChild(link);</script>'); document.write('<div id=\"nd-wrapper\"><h2 id=\"nd-header\">NerdDinner.com</h2><div id=\"nd-outer\">'); <% if (Model.Dinners.Count == 0) { %> document.write('<div id=\"nd-bummer\">Looks like there\'s no Nerd Dinners near <%:Model.LocationName %> in the near future. Why not <a target=\"_blank\" href=\"http://www.nerddinner.com/Dinners/Create\">host one</a>?</div>'); <% } else { %> document.write('<h3> Dinners Near You</h3><ul>'); <% foreach (var item in Model.Dinners) { %> document.write('<li><a target=\"_blank\" href=\"http://nrddnr.com/<%: item.DinnerID %>\"><%: item.Title.Truncate(20) %> with <%: item.HostedBy %> on <%: item.EventDate.ToShortDateString() %></a></li>'); <% } %> document.write('</ul>'); <% } %> document.write('<div id=\"nd-footer\"> More dinners and fun at <a target=\"_blank\" href=\"http://nrddnr.com\">http://nrddnr.com</a></div></div></div>'); Getting IP’s for Testing There are a variety of online services that will translate a location to an IP, which were handy for testing these out. I found http://www.itouchmap.com/latlong.html to be most useful, but I’m open to suggestions if you know of something better. Next steps I think the next step here is to minimize load – you know, in case people start actually using this flair. There are two places to think about – the NerdDinner.com servers, and the services we’re using for Geolocation. I usually think about caching as a first attack on server load, but that’s less helpful here since every user will have a different IP. Instead, I’d look at taking advantage of Asynchronous Controller Actions, a cool new feature in ASP.NET MVC 2. Async Actions let you call a potentially long-running webservice without tying up a thread on the server while waiting for the response. There’s some good info on that in the MSDN documentation, and Dino Esposito wrote a great article on Asynchronous ASP.NET Pages in the April 2010 issue of MSDN Magazine. But let’s think of the children, shall we? What about ipinfodb.com? Well, they don’t have specific daily limits, but they do throttle you if you put a lot of traffic on them. From their FAQ: We do not have a specific daily limit but queries that are at a rate faster than 2 per second will be put in "queue". If you stay below 2 queries/second everything will be normal. If you go over the limit, you will still get an answer for all queries but they will be slowed down to about 1 per second. This should not affect most users but for high volume websites, you can either use our IP database on your server or we can whitelist your IP for 5$/month (simply use the donate form and leave a comment with your server IP). Good programming practices such as not querying our API for all page views (you can store the data in a cookie or a database) will also help not reaching the limit. So the first step there is to save the geolocalization information in a time-limited cookie, which will allow us to look up the local dinners immediately without having to hit the geolocation service.

    Read the article

  • Tips on Migrating from AquaLogic .NET Accelerator to WebCenter WSRP Producer for .NET

    - by user647124
    This year I embarked on a journey to migrate a group of ASP.NET web applications developed to integrate with WebLogic Portal 9.2 via the AquaLogic® Interaction .NET Application Accelerator 1.0 to instead use the Oracle WebCenter WSRP Producer for .NET and integrated with WebLogic Portal 10.3.4. It has been a very winding path and this blog entry is intended to share both the lessons learned and relevant approaches that led to those learnings. Like most journeys of discovery, it was not a direct path, and there are notes to let you know when it is practical to skip a section if you are in a hurry to get from here to there. For the Curious From the perspective of necessity, this section would be better at the end. If it were there, though, it would probably be read by far fewer people, including those that are actually interested in these types of sections. Those in a hurry may skip past and be none the worst for it in dealing with the hands-on bits of performing a migration from .NET Accelerator to WSRP Producer. For others who want to talk about why they did what they did after they did it, or just want to know for themselves, enjoy. A Brief (and edited) History of the WSRP for .NET Technologies (as Relevant to the this Post) Note: This section is for those who are curious about why the migration path is not as simple as many other Oracle technologies. You can skip this section in its entirety and still be just as competent in performing a migration as if you had read it. The currently deployed architecture that was to be migrated and upgraded achieved initial integration between .NET and J2EE over the WSRP protocol through the use of The AquaLogic Interaction .NET Application Accelerator. The .NET Accelerator allowed the applications that were written in ASP.NET and deployed on a Microsoft Internet Information Server (IIS) to interact with a WebLogic Portal application deployed on a WebLogic (J2EE application) Server (both version 9.2, the state of the art at the time of its creation). At the time this architectural decision for the application was made, both the AquaLogic and WebLogic brands were owned by BEA Systems. The AquaLogic brand included products acquired by BEA through the acquisition of Plumtree, whose flagship product was a portal platform available in both J2EE and .NET versions. As part of this dual technology support an adaptor was created to facilitate the use of WSRP as a communication protocol where customers wished to integrate components from both versions of the Plumtree portal. The adapter evolved over several product generations to include a broad array of both standard and proprietary WSRP integration capabilities. Later, BEA Systems was acquired by Oracle. Over the course of several years Oracle has acquired a large number of portal applications and has taken the strategic direction to migrate users of these myriad (and formerly competitive) products to the Oracle WebCenter technology stack. As part of Oracle’s strategic technology roadmap, older portal products are being schedule for end of life, including the portal products that were part of the BEA acquisition. The .NET Accelerator has been modified over a very long period of time with features driven by users of that product and developed under three different vendors (each a direct competitor in the same solution space prior to merger). The Oracle WebCenter WSRP Producer for .NET was introduced much more recently with the key objective to specifically address the needs of the WebCenter customers developing solutions accessible through both J2EE and .NET platforms utilizing the WSRP specifications. The Oracle Product Development Team also provides these insights on the drivers for developing the WSRP Producer: ***************************************** Support for ASP.NET AJAX. Controls using the ASP.NET AJAX script manager do not function properly in the Application Accelerator for .NET. Support 2 way SSL in WLP. This was not possible with the proxy/bridge set up in the existing Application Accelerator for .NET. Allow developers to code portlets (Web Parts) using the .NET framework rather than a proprietary framework. Developers had to use the Application Accelerator for .NET plug-ins to Visual Studio to manage preferences and profile data. This is now replaced with the .NET Framework Personalization (for preferences) and Profile providers. The WSRP Producer for .NET was created as a new way of developing .NET portlets. It was never designed to be an upgrade path for the Application Accelerator for .NET. .NET developers would create new .NET portlets with the WSRP Producer for .NET and leave any existing .NET portlets running in the Application Accelerator for .NET. ***************************************** The advantage to creating a new solution for WSRP is a product that is far easier for Oracle to maintain and support which in turn improves quality, reliability and maintainability for their customers. No changes to J2EE applications consuming the WSRP portlets previously rendered by the.NET Accelerator is required to migrate from the Aqualogic WSRP solution. For some customers using the .NET Accelerator the challenge is adapting their current .NET applications to work with the WSRP Producer (or any other WSRP adapter as they are proprietary by nature). Part of this adaptation is the need to deploy the .NET applications as a child to the WSRP producer web application as root. Differences between .NET Accelerator and WSRP Producer Note: This section is for those who are curious about why the migration is not as pluggable as something such as changing security providers in WebLogic Server. You can skip this section in its entirety and still be just as competent in performing a migration as if you had read it. The basic terminology used to describe the participating applications in a WSRP environment are the same when applied to either the .NET Accelerator or the WSRP Producer: Producer and Consumer. In both cases the .NET application serves as what is referred to as a WSRP environment as the Producer. The difference lies in how the two adapters create the WSRP translation of the .NET application. The .NET Accelerator, as the name implies, is meant to serve as a quick way of adding WSRP capability to a .NET application. As such, at a high level, the .NET Accelerator behaves as a proxy for requests between the .NET application and the WSRP Consumer. A WSRP request is sent from the consumer to the .NET Accelerator, the.NET Accelerator transforms this request into an ASP.NET request, receives the response, then transforms the response into a WSRP response. The .NET Accelerator is deployed as a stand-alone application on IIS. The WSRP Producer is deployed as a parent application on IIS and all ASP.NET modules that will be made available over WSRP are deployed as children of the WSRP Producer application. In this manner, the WSRP Producer acts more as a Request Filter than a proxy in the WSRP transactions between Producer and Consumer. Highly Recommended Enabling Logging Note: You can skip this section now, but you will most likely want to come back to it later, so why not just read it now? Logging is very helpful in tracking down the causes of any anomalies during testing of migrated portlets. To enable the WSRP Producer logging, update the Application_Start method in the Global.asax.cs for your .NET application by adding log4net.Config.XmlConfigurator.Configure(); IIS logs will usually (in a standard configuration) be in a sub folder under C:\WINDOWS\system32\LogFiles\W3SVC. WSRP Producer logs will be found at C:\Oracle\Middleware\WSRPProducerForDotNet\wsrpdefault\Logs\WSRPProducer.log InputTrace.webinfo and OutputTrace.webinfo are located under C:\Oracle\Middleware\WSRPProducerForDotNet\wsrpdefault and can be useful in debugging issues related to markup transformations. Things You Must Do Merge Web.Config Note: If you have been skipping all the sections that you can, now is the time to stop and pay attention J Because the existing .NET application will become a sub-application to the WSRP Producer, you will want to merge required settings from the existing Web.Config to the one in the WSRP Producer. Use the WSRP Producer Master Page The Master Page installed for the WSRP Producer provides common, hiddenform fields and JavaScripts to facilitate portlet instance management and display configuration when the child page is being rendered over WSRP. You add the Master Page by including it in the <@ Page declaration with MasterPageFile="~/portlets/Resources/MasterPages/WSRP.Master" . You then replace: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" > <HTML> <HEAD> With <asp:Content ID="ContentHead1" ContentPlaceHolderID="wsrphead" Runat="Server"> And </HEAD> <body> <form id="theForm" method="post" runat="server"> With </asp:Content> <asp:Content ID="ContentBody1" ContentPlaceHolderID="Main" Runat="Server"> And finally </form> </body> </HTML> With </asp:Content> In the event you already use Master Pages, adapt your existing Master Pages to be sub masters. See Nested ASP.NET Master Pages for a detailed reference of how to do this. It Happened to Me, It Might Happen to You…Or Not Watch for Use of Session or Request in OnInit In the event the .NET application being modified has pages developed to assume the user has been authenticated in an earlier page request there may be direct or indirect references in the OnInit method to request or session objects that may not have been created yet. This will vary from application to application, so the recommended approach is to test first. If there is an issue with a page running as a WSRP portlet then check for potential references in the OnInit method (including references by methods called within OnInit) to session or request objects. If there are, the simplest solution is to create a new method and then call that method once the necessary object(s) is fully available. I find doing this at the start of the Page_Load method to be the simplest solution. Case Sensitivity .NET languages are not case sensitive, but Java is. This means it is possible to have many variations of SRC= and src= or .JPG and .jpg. The preferred solution is to make these mark up instances all lower case in your .NET application. This will allow the default Rewriter rules in wsrp-producer.xml to work as is. If this is not practical, then make duplicates of any rules where an issue is occurring due to upper or mixed case usage in the .NET application markup and match the case in use with the duplicate rule. For example: <RewriterRule> <LookFor>(href=\"([^\"]+)</LookFor> <ChangeToAbsolute>true</ChangeToAbsolute> <ApplyTo>.axd,.css</ApplyTo> <MakeResource>true</MakeResource> </RewriterRule> May need to be duplicated as: <RewriterRule> <LookFor>(HREF=\"([^\"]+)</LookFor> <ChangeToAbsolute>true</ChangeToAbsolute> <ApplyTo>.axd,.css</ApplyTo> <MakeResource>true</MakeResource> </RewriterRule> While it is possible to write a regular expression that will handle mixed case usage, it would be long and strenous to test and maintain, so the recommendation is to use duplicate rules. Is it Still Relative? Some .NET applications base relative paths with a fixed root location. With the introduction of the WSRP Producer, the root has moved up one level. References to ~/ will need to be updated to ~/portlets and many ../ paths will need another ../ in front. I Can See You But I Can’t Find You This issue was first discovered while debugging modules with code that referenced the form on a page from the code-behind by name and/or id. The initial error presented itself as run-time error that was difficult to interpret over WSRP but seemed clear when run as straight ASP.NET as it indicated that the object with the form name did not exist. Since the form name was no longer valid after implementing the WSRP Master Page, the likely fix seemed to simply update the references in the code. However, as the WSRP Master Page is external to the code, a compile time error resulted: Error      155         The name 'form1' does not exist in the current context                C:\Oracle\Middleware\WSRPProducerForDotNet\wsrpdefault\portlets\legacywebsite\module\Screens \Reporting.aspx.cs                51           52           legacywebsite.module Much hair-pulling research later it was discovered that it was the use of the FindControl method causing the issue. FindControl doesn’t work quite as expected once a Master Page has been introduced as the controls become embedded in controls, require a recursion to find them that is not part of the FindControl method. In code where the page form is referenced by name, there are two steps to the solution. First, the form needs to be referenced in code generically with Page.Form. For example, this: ToggleControl ctrl = new ToggleControl(frmManualEntry, FunctionLibrary.ParseArrayLst(userObj.Roles)); Becomes this: ToggleControl ctrl = new ToggleControl(Page.Form, FunctionLibrary.ParseArrayLst(userObj.Roles)); Generally the form id is referenced in most ASP.NET applications as a path to a control on the form. To reach the control once a MasterPage has been added requires an additional method to recurse through the controls collections within the form and find the control ID. The following method (found at Rick Strahl's Web Log) corrects this very nicely: public static Control FindControlRecursive(Control Root, string Id) { if (Root.ID == Id) return Root; foreach (Control Ctl in Root.Controls) { Control FoundCtl = FindControlRecursive(Ctl, Id); if (FoundCtl != null) return FoundCtl; } return null; } Where the form name is not referenced, simply using the FindControlRecursive method in place of FindControl will be all that is necessary. Following the second part of the example referenced earlier, the method called with Page.Form changes its value extraction code block from this: Label lblErrMsg = (Label)frmRef.FindControl("lblBRMsg" To this: Label lblErrMsg = (Label) FunctionLibrary.FindControlRecursive(frmRef, "lblBRMsg" The Master That Won’t Step Aside In most migrations it is preferable to make as few changes as possible. In one case I ran across an existing Master Page that would not function as a sub-Master Page. While it would probably have been educational to trace down why, the expedient process of updating it to take the place of the WSRP Master Page is the route I took. The changes are highlighted below: … <asp:ContentPlaceHolder ID="wsrphead" runat="server"></asp:ContentPlaceHolder> </head> <body leftMargin="0" topMargin="0"> <form id="TheForm" runat="server"> <input type="hidden" name="key" id="key" value="" /> <input type="hidden" name="formactionurl" id="formactionurl" value="" /> <input type="hidden" name="handle" id="handle" value="" /> <asp:ScriptManager ID="ScriptManager1" runat="server" EnablePartialRendering="true" > </asp:ScriptManager> This approach did not work for all existing Master Pages, but fortunately all of the other existing Master Pages I have run across worked fine as a sub-Master to the WSRP Master Page. Moving On In Enterprise Portals, even after you get everything working, the work is not finished. Next you need to get it where everyone will work with it. Migration Planning Providing that the server where IIS is running is adequately sized, it is possible to run both the .NET Accelerator and the WSRP Producer on the same server during the upgrade process. The upgrade can be performed incrementally, i.e., one portlet at a time, if server administration processes support it. Those processes would include the ability to manage a second producer in the consuming portal and to change over individual portlet instances from one provider to the other. If processes or requirements demand that all portlets be cut over at the same time, it needs to be determined if this cut over should include a new producer, updating all of the portlets in the consumer, or if the WSRP Producer portlet configuration must maintain the naming conventions used by the .NET Accelerator and simply change the WSRP end point configured in the consumer. In some enterprises it may even be necessary to maintain the same WSDL end point, at which point the IIS configuration will be where the updates occur. The downside to such a requirement is that it makes rolling back very difficult, should the need arise. Location, Location, Location Not everyone wants the web application to have the descriptively obvious wsrpdefault location, or needs to create a second WSRP site on the same server. The instructions below are from the product team and, while targeted towards making a second site, will work for creating a site with a different name and then remove the old site. You can also change just the name in IIS. Manually Creating a WSRP Producer Site Instructions (NOTE: all executables used are the same ones used by the installer and “wsrpdev” will be the name of the new instance): 1. Copy C:\Oracle\Middleware\WSRPProducerForDotNet\wsrpdefault to C:\Oracle\Middleware\WSRPProducerForDotNet\wsrpdev. 2. Bring up a command window as an administrator 3. Run C:\Oracle\Middleware\WSRPProducerForDotNet\uninstall_resources\IISAppAccelSiteCreator.exe install WSRPProducers wsrpdev "C:\Oracle\Middleware\WSRPProducerForDotNet\wsrpdev" 8678 2.0.50727 4. Run C:\Oracle\Middleware\WSRPProducerForDotNet\uninstall_resources\PermManage.exe add FileSystem C:\Oracle\Middleware\WSRPProducerForDotNet\wsrpdev "NETWORK SERVICE" 3 1 5. Run C:\Oracle\Middleware\WSRPProducerForDotNet\uninstall_resources\PermManage.exe add FileSystem C:\Oracle\Middleware\WSRPProducerForDotNet\wsrpdev EVERYONE 1 1 6. Open up C:\Oracle\Middleware\WSRPProducerForDotNet\wsdl\1.0\WSRPService.wsdl and replace wsrpdefault with wsrpdev 7. Open up C:\Oracle\Middleware\WSRPProducerForDotNet\wsdl\2.0\WSRPService.wsdl and replace wsrpdefault with wsrpdev Tests: 1. Bring up a browser on the host itself and go to http://localhost:8678/wsrpdev/wsdl/1.0/WSRPService.wsdl and make sure that the URLs in the XML returned include the wsrpdev changes you made in step 6. 2. Bring up a browser on the host itself and see if the default sample comes up: http://localhost:8678/wsrpdev/portlets/ASPNET_AJAX_sample/default.aspx 3. Register the producer in WLP and test the portlet. Changing the Port used by WSRP Producer The pre-configured port for the WSRP Producer is 8678. You can change this port by updating both the IIS configuration and C:\Oracle\Middleware\WSRPProducerForDotNet\[WSRP_APP_NAME]\wsdl\1.0\WSRPService.wsdl. Do You Need to Migrate? Oracle Premier Support ended in November of 2010 for AquaLogic Interaction .NET Application Accelerator 1.x and Extended Support ends in November 2012 (see http://www.oracle.com/us/support/lifetime-support/lifetime-support-software-342730.html for other related dates). This means that integration with products released after November of 2010 is not supported. If having such support is the policy within your enterprise, you do indeed need to migrate. If changes in your enterprise cause your current solution with the .NET Accelerator to no longer function properly, you may need to migrate. Migration is a choice, and if the goals of your enterprise are to take full advantage of newer technologies then migration is certainly one activity you should be planning for.

    Read the article

  • WLS MBeans

    - by Jani Rautiainen
    WLS provides a set of Managed Beans (MBeans) to configure, monitor and manage WLS resources. We can use the WLS MBeans to automate some of the tasks related to the configuration and maintenance of the WLS instance. The MBeans can be accessed a number of ways; using various UIs and programmatically using Java or WLST Python scripts.For customization development we can use the features to e.g. manage the deployed customization in MDS, control logging levels, automate deployment of dependent libraries etc. This article is an introduction on how to access and use the WLS MBeans. The goal is to illustrate the various access methods in a single article; the details of the features are left to the linked documentation.This article covers Windows based environment, steps for Linux would be similar however there would be some differences e.g. on how the file paths are defined. MBeansThe WLS MBeans can be categorized to runtime and configuration MBeans.The Runtime MBeans can be used to access the runtime information about the server and its resources. The data from runtime beans is only available while the server is running. The runtime beans can be used to e.g. check the state of the server or deployment.The Configuration MBeans contain information about the configuration of servers and resources. The configuration of the domain is stored in the config.xml file and the configuration MBeans can be used to access and modify the configuration data. For more information on the WLS MBeans refer to: Understanding WebLogic Server MBeans WLS MBean reference Java Management Extensions (JMX)We can use JMX APIs to access the WLS MBeans. This allows us to create Java programs to configure, monitor, and manage WLS resources. In order to use the WLS MBeans we need to add the following library into the class-path: WL_HOME\lib\wljmxclient.jar Connecting to a WLS MBean server The WLS MBeans are contained in a Mbean server, depending on the requirement we can connect to (MBean Server / JNDI Name): Domain Runtime MBean Server weblogic.management.mbeanservers.domainruntime Runtime MBean Server weblogic.management.mbeanservers.runtime Edit MBean Server weblogic.management.mbeanservers.edit To connect to the WLS MBean server first we need to create a map containing the credentials; Hashtable<String, String> param = new Hashtable<String, String>(); param.put(Context.SECURITY_PRINCIPAL, "weblogic");        param.put(Context.SECURITY_CREDENTIALS, "weblogic1");        param.put(JMXConnectorFactory.PROTOCOL_PROVIDER_PACKAGES, "weblogic.management.remote"); These define the user, password and package containing the protocol. Next we create the connection: JMXServiceURL serviceURL =     new JMXServiceURL("t3","127.0.0.1",7101,     "/jndi/weblogic.management.mbeanservers.domainruntime"); JMXConnector connector = JMXConnectorFactory.connect(serviceURL, param); MBeanServerConnection connection = connector.getMBeanServerConnection(); With the connection we can now access the MBeans for the WLS instance. For a complete example see Appendix A of this post. For more details refer to Accessing WebLogic Server MBeans with JMX Accessing WLS MBeans The WLS MBeans are structured hierarchically; in order to access content we need to know the path to the MBean we are interested in. The MBean is accessed using “MBeanServerConnection. getAttribute” API.  WLS provides entry points to the hierarchy allowing us to navigate all the WLS MBeans in the hierarchy (MBean Server / JMX object name): Domain Runtime MBean Server com.bea:Name=DomainRuntimeService,Type=weblogic.management.mbeanservers.domainruntime.DomainRuntimeServiceMBean Runtime MBean Servers com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean Edit MBean Server com.bea:Name=EditService,Type=weblogic.management.mbeanservers.edit.EditServiceMBean For example we can access the Domain Runtime MBean using: ObjectName service = new ObjectName( "com.bea:Name=DomainRuntimeService," + "Type=weblogic.management.mbeanservers.domainruntime.DomainRuntimeServiceMBean"); Same syntax works for any “child” WLS MBeans e.g. to find out all application deployments we can: ObjectName domainConfig = (ObjectName)connection.getAttribute(service,"DomainConfiguration"); ObjectName[] appDeployments = (ObjectName[])connection.getAttribute(domainConfig,"AppDeployments"); Alternatively we could access the same MBean using the full syntax: ObjectName domainConfig = new ObjectName("com.bea:Location=DefaultDomain,Name=DefaultDomain,Type=Domain"); ObjectName[] appDeployments = (ObjectName[])connection.getAttribute(domainConfig,"AppDeployments"); For more details refer to Accessing WebLogic Server MBeans with JMX Invoking operations on WLS MBeans The WLS MBean operations can be invoked with MBeanServerConnection. invoke API; in the following example we query the state of “AppsLoggerService” application: ObjectName appRuntimeStateRuntime = new ObjectName("com.bea:Name=AppRuntimeStateRuntime,Type=AppRuntimeStateRuntime"); Object[] parameters = { "AppsLoggerService", "DefaultServer" }; String[] signature = { "java.lang.String", "java.lang.String" }; String result = (String)connection.invoke(appRuntimeStateRuntime,"getCurrentState",parameters, signature); The result returned should be "STATE_ACTIVE" assuming the "AppsLoggerService" application is up and running. WebLogic Scripting Tool (WLST) The WebLogic Scripting Tool (WLST) is a command-line scripting environment that we can access the same WLS MBeans. The tool is located under: $MW_HOME\oracle_common\common\bin\wlst.bat Do note that there are several instances of the wlst script under the $MW_HOME, each of them works, however the commands available vary, so we want to use the one under “oracle_common”. The tool is started in offline mode. In offline mode we can access and manipulate the domain configuration. In online mode we can access the runtime information. We connect to the Administration Server : connect("weblogic","weblogic1", "t3://127.0.0.1:7101") In both online and offline modes we can navigate the WLS MBean using commands like "ls" to print content and "cd" to navigate between objects, for example: All the commands available can be obtained with: help('all') For details of the tool refer to WebLogic Scripting Tool and for the commands available WLST Command and Variable Reference. Also do note that the WLST tool can be invoked from Java code in Embedded Mode. Running Scripts The WLST tool allows us to automate tasks using Python scripts in Script Mode. The script can be manually created or recorded by the WLST tool. Example commands of recording a script: startRecording("c:/temp/recording.py") <commands that we want to record> stopRecording() We can run the script from WLST: execfile("c:/temp/recording.py") We can also run the script from the command line: C:\apps\Oracle\Middleware\oracle_common\common\bin\wlst.cmd c:/temp/recording.py There are various sample scripts are provided with the WLS instance. UI to Access the WLS MBeans There are various UIs through which we can access the WLS MBeans. Oracle Enterprise Manager Fusion Middleware Control Oracle WebLogic Server Administration Console Fusion Middleware Control MBean Browser In the integrated JDeveloper environment only the Oracle WebLogic Server Administration Console is available to us. For more information refer to the documentation, one noteworthy feature in the console is the ability to record WLST scripts based on the navigation. In addition to the UIs above the JConsole included in the JDK can be used to access the WLS MBeans. The JConsole needs to be started with specific parameter to force WLS objects to be used and jar files in the classpath: "C:\apps\Oracle\Middleware\jdk160_24\bin\jconsole" -J-Djava.class.path=C:\apps\Oracle\Middleware\jdk160_24\lib\jconsole.jar;C:\apps\Oracle\Middleware\jdk160_24\lib\tools.jar;C:\apps\Oracle\Middleware\wlserver_10.3\server\lib\wljmxclient.jar -J-Djmx.remote.protocol.provider.pkgs=weblogic.management.remote For more details refer to the Accessing Custom MBeans from JConsole. Summary In this article we have covered various ways we can access and use the WLS MBeans in context of integrated WLS in JDeveloper to be used for Fusion Application customization development. References Developing Custom Management Utilities With JMX for Oracle WebLogic Server Accessing WebLogic Server MBeans with JMX WebLogic Server MBean Reference WebLogic Scripting Tool WLST Command and Variable Reference Appendix A package oracle.apps.test; import java.io.IOException;import java.net.MalformedURLException;import java.util.Hashtable;import javax.management.MBeanServerConnection;import javax.management.MalformedObjectNameException;import javax.management.ObjectName;import javax.management.remote.JMXConnector;import javax.management.remote.JMXConnectorFactory;import javax.management.remote.JMXServiceURL;import javax.naming.Context;/** * This class contains simple examples on how to access WLS MBeans using JMX. */public class BlogExample {    /**     * Connection to the WLS MBeans     */    private MBeanServerConnection connection;    /**     * Constructor that takes in the connection information for the      * domain and obtains the resources from WLS MBeans using JMX.     * @param hostName host name to connect to for the WLS server     * @param port port to connect to for the WLS server     * @param userName user name to connect to for the WLS server     * @param password password to connect to for the WLS server     */    public BlogExample(String hostName, String port, String userName,                       String password) {        super();        try {            initConnection(hostName, port, userName, password);        } catch (Exception e) {            throw new RuntimeException("Unable to connect to the domain " +                                       hostName + ":" + port);        }    }    /**     * Default constructor.     * Tries to create connection with default values. Runtime exception will be     * thrown if the default values are not used in the local instance.     */    public BlogExample() {        this("127.0.0.1", "7101", "weblogic", "weblogic1");    }    /**     * Initializes the JMX connection to the WLS Beans     * @param hostName host name to connect to for the WLS server     * @param port port to connect to for the WLS server     * @param userName user name to connect to for the WLS server     * @param password password to connect to for the WLS server     * @throws IOException error connecting to the WLS MBeans     * @throws MalformedURLException error connecting to the WLS MBeans     * @throws MalformedObjectNameException error connecting to the WLS MBeans     */    private void initConnection(String hostName, String port, String userName,                                String password)                                 throws IOException, MalformedURLException,                                        MalformedObjectNameException {        String protocol = "t3";        String jndiroot = "/jndi/";        String mserver = "weblogic.management.mbeanservers.domainruntime";        JMXServiceURL serviceURL =            new JMXServiceURL(protocol, hostName, Integer.valueOf(port),                              jndiroot + mserver);        Hashtable<String, String> h = new Hashtable<String, String>();        h.put(Context.SECURITY_PRINCIPAL, userName);        h.put(Context.SECURITY_CREDENTIALS, password);        h.put(JMXConnectorFactory.PROTOCOL_PROVIDER_PACKAGES,              "weblogic.management.remote");        JMXConnector connector = JMXConnectorFactory.connect(serviceURL, h);        connection = connector.getMBeanServerConnection();    }    /**     * Main method used to invoke the logic for testing     * @param args arguments passed to the program     */    public static void main(String[] args) {        BlogExample blogExample = new BlogExample();        blogExample.testEntryPoint();        blogExample.testDirectAccess();        blogExample.testInvokeOperation();    }    /**     * Example of using an entry point to navigate the WLS MBean hierarchy.     */    public void testEntryPoint() {        try {            System.out.println("testEntryPoint");            ObjectName service =             new ObjectName("com.bea:Name=DomainRuntimeService,Type=" +"weblogic.management.mbeanservers.domainruntime.DomainRuntimeServiceMBean");            ObjectName domainConfig =                (ObjectName)connection.getAttribute(service,                                                    "DomainConfiguration");            ObjectName[] appDeployments =                (ObjectName[])connection.getAttribute(domainConfig,                                                      "AppDeployments");            for (ObjectName appDeployment : appDeployments) {                String resourceIdentifier =                    (String)connection.getAttribute(appDeployment,                                                    "SourcePath");                System.out.println(resourceIdentifier);            }        } catch (Exception e) {            throw new RuntimeException(e);        }    }    /**     * Example of accessing WLS MBean directly with a full reference.     * This does the same thing as testEntryPoint in slightly difference way.     */    public void testDirectAccess() {        try {            System.out.println("testDirectAccess");            ObjectName appDeployment =                new ObjectName("com.bea:Location=DefaultDomain,"+                               "Name=AppsLoggerService,Type=AppDeployment");            String resourceIdentifier =                (String)connection.getAttribute(appDeployment, "SourcePath");            System.out.println(resourceIdentifier);        } catch (Exception e) {            throw new RuntimeException(e);        }    }    /**     * Example of invoking operation on a WLS MBean.     */    public void testInvokeOperation() {        try {            System.out.println("testInvokeOperation");            ObjectName appRuntimeStateRuntime =                new ObjectName("com.bea:Name=AppRuntimeStateRuntime,"+                               "Type=AppRuntimeStateRuntime");            String identifier = "AppsLoggerService";            String serverName = "DefaultServer";            Object[] parameters = { identifier, serverName };            String[] signature = { "java.lang.String", "java.lang.String" };            String result =                (String)connection.invoke(appRuntimeStateRuntime, "getCurrentState",                                          parameters, signature);            System.out.println("State of " + identifier + " = " + result);        } catch (Exception e) {            throw new RuntimeException(e);        }    }}

    Read the article

  • Developing Spring Portlet for use inside Weblogic Portal / Webcenter Portal

    - by Murali Veligeti
    We need to understand the main difference between portlet workflow and servlet workflow.The main difference between portlet workflow and servlet workflow is that, the request to the portlet can have two distinct phases: 1) Action phase 2) Render phase. The Action phase is executed only once and is where any 'backend' changes or actions occur, such as making changes in a database. The Render phase then produces what is displayed to the user each time the display is refreshed. The critical point here is that for a single overall request, the action phase is executed only once, but the render phase may be executed multiple times. This provides a clean separation between the activities that modify the persistent state of your system and the activities that generate what is displayed to the user.The dual phases of portlet requests are one of the real strengths of the JSR-168 specification. For example, dynamic search results can be updated routinely on the display without the user explicitly re-running the search. Most other portlet MVC frameworks attempt to completely hide the two phases from the developer and make it look as much like traditional servlet development as possible - we think this approach removes one of the main benefits of using portlets. So, the separation of the two phases is preserved throughout the Spring Portlet MVC framework. The primary manifestation of this approach is that where the servlet version of the MVC classes will have one method that deals with the request, the portlet version of the MVC classes will have two methods that deal with the request: one for the action phase and one for the render phase. For example, where the servlet version of AbstractController has the handleRequestInternal(..) method, the portlet version of AbstractController has handleActionRequestInternal(..) and handleRenderRequestInternal(..) methods.The Spring Portlet Framework is designed around a DispatcherPortlet that dispatches requests to handlers, with configurable handler mappings and view resolution, just as the DispatcherServlet in the Spring Web Framework does.  Developing portlet.xml Let's start the sample development by creating the portlet.xml file in the /WebContent/WEB-INF/ folder as shown below: <?xml version="1.0" encoding="UTF-8"?> <portlet-app version="2.0" xmlns="http://java.sun.com/xml/ns/portlet/portlet-app_2_0.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <portlet> <portlet-name>SpringPortletName</portlet-name> <portlet-class>org.springframework.web.portlet.DispatcherPortlet</portlet-class> <supports> <mime-type>text/html</mime-type> <portlet-mode>view</portlet-mode> </supports> <portlet-info> <title>SpringPortlet</title> </portlet-info> </portlet> </portlet-app> DispatcherPortlet is responsible for handling every client request. When it receives a request, it finds out which Controller class should be used for handling this request, and then it calls its handleActionRequest() or handleRenderRequest() method based on the request processing phase. The Controller class executes business logic and returns a View name that should be used for rendering markup to the user. The DispatcherPortlet then forwards control to that View for actual markup generation. As you can see, DispatcherPortlet is the central dispatcher for use within Spring Portlet MVC Framework. Note that your portlet application can define more than one DispatcherPortlet. If it does so, then each of these portlets operates its own namespace, loading its application context and handler mapping. The DispatcherPortlet is also responsible for loading application context (Spring configuration file) for this portlet. First, it tries to check the value of the configLocation portlet initialization parameter. If that parameter is not specified, it takes the portlet name (that is, the value of the <portlet-name> element), appends "-portlet.xml" to it, and tries to load that file from the /WEB-INF folder. In the portlet.xml file, we did not specify the configLocation initialization parameter, so let's create SpringPortletName-portlet.xml file in the next section. Developing SpringPortletName-portlet.xml Create the SpringPortletName-portlet.xml file in the /WebContent/WEB-INF folder of your application as shown below: <?xml version="1.0" encoding="UTF-8"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.0.xsd"> <bean id="viewResolver" class="org.springframework.web.servlet.view.InternalResourceViewResolver"> <property name="viewClass" value="org.springframework.web.servlet.view.JstlView"/> <property name="prefix" value="/jsp/"/> <property name="suffix" value=".jsp"/> </bean> <bean id="pointManager" class="com.wlp.spring.bo.internal.PointManagerImpl"> <property name="users"> <list> <ref bean="point1"/> <ref bean="point2"/> <ref bean="point3"/> <ref bean="point4"/> </list> </property> </bean> <bean id="point1" class="com.wlp.spring.bean.User"> <property name="name" value="Murali"/> <property name="points" value="6"/> </bean> <bean id="point2" class="com.wlp.spring.bean.User"> <property name="name" value="Sai"/> <property name="points" value="13"/> </bean> <bean id="point3" class="com.wlp.spring.bean.User"> <property name="name" value="Rama"/> <property name="points" value="43"/> </bean> <bean id="point4" class="com.wlp.spring.bean.User"> <property name="name" value="Krishna"/> <property name="points" value="23"/> </bean> <bean id="messageSource" class="org.springframework.context.support.ResourceBundleMessageSource"> <property name="basename" value="messages"/> </bean> <bean name="/users.htm" id="userController" class="com.wlp.spring.controller.UserController"> <property name="pointManager" ref="pointManager"/> </bean> <bean name="/pointincrease.htm" id="pointIncreaseController" class="com.wlp.spring.controller.IncreasePointsFormController"> <property name="sessionForm" value="true"/> <property name="pointManager" ref="pointManager"/> <property name="commandName" value="pointIncrease"/> <property name="commandClass" value="com.wlp.spring.bean.PointIncrease"/> <property name="formView" value="pointincrease"/> <property name="successView" value="users"/> </bean> <bean id="parameterMappingInterceptor" class="org.springframework.web.portlet.handler.ParameterMappingInterceptor" /> <bean id="portletModeParameterHandlerMapping" class="org.springframework.web.portlet.handler.PortletModeParameterHandlerMapping"> <property name="order" value="1" /> <property name="interceptors"> <list> <ref bean="parameterMappingInterceptor" /> </list> </property> <property name="portletModeParameterMap"> <map> <entry key="view"> <map> <entry key="pointincrease"> <ref bean="pointIncreaseController" /> </entry> <entry key="users"> <ref bean="userController" /> </entry> </map> </entry> </map> </property> </bean> <bean id="portletModeHandlerMapping" class="org.springframework.web.portlet.handler.PortletModeHandlerMapping"> <property name="order" value="2" /> <property name="portletModeMap"> <map> <entry key="view"> <ref bean="userController" /> </entry> </map> </property> </bean> </beans> The SpringPortletName-portlet.xml file is an application context file for your MVC portlet. It has a couple of bean definitions: viewController. At this point, remember that the viewController bean definition points to the com.ibm.developerworks.springmvc.ViewController.java class. portletModeHandlerMapping. As we discussed in the last section, whenever DispatcherPortlet gets a client request, it tries to find a suitable Controller class for handling that request. That is where PortletModeHandlerMapping comes into the picture. The PortletModeHandlerMapping class is a simple implementation of the HandlerMapping interface and is used by DispatcherPortlet to find a suitable Controller for every request. The PortletModeHandlerMapping class uses Portlet mode for the current request to find a suitable Controller class to use for handling the request. The portletModeMap property of portletModeHandlerMapping bean is the place where we map the Portlet mode name against the Controller class. In the sample code, we show that viewController is responsible for handling View mode requests. Developing UserController.java In the preceding section, you learned that the viewController bean is responsible for handling all the View mode requests. Your next step is to create the UserController.java class as shown below: public class UserController extends AbstractController { private PointManager pointManager; public void handleActionRequest(ActionRequest request, ActionResponse response) throws Exception { } public ModelAndView handleRenderRequest(RenderRequest request, RenderResponse response) throws ServletException, IOException { String now = (new java.util.Date()).toString(); Map<String, Object> myModel = new HashMap<String, Object>(); myModel.put("now", now); myModel.put("users", this.pointManager.getUsers()); return new ModelAndView("users", "model", myModel); } public void setPointManager(PointManager pointManager) { this.pointManager = pointManager; } } Every controller class in Spring Portlet MVC Framework must implement the org.springframework.web. portlet.mvc.Controller interface directly or indirectly. To make things easier, Spring Framework provides AbstractController class, which is the default implementation of the Controller interface. As a developer, you should always extend your controller from either AbstractController or one of its more specific subclasses. Any implementation of the Controller class should be reusable, thread-safe, and capable of handling multiple requests throughout the lifecycle of the portlet. In the sample code, we create the ViewController class by extending it from AbstractController. Because we don't want to do any action processing in the HelloSpringPortletMVC portlet, we override only the handleRenderRequest() method of AbstractController. Now, the only thing that HelloWorldPortletMVC should do is render the markup of View.jsp to the user when it receives a user request to do so. To do that, return the object of ModelAndView with a value of view equal to View. Developing web.xml According to Portlet Specification 1.0, every portlet application is also a Servlet Specification 2.3-compliant Web application, and it needs a Web application deployment descriptor (that is, web.xml). Let’s create the web.xml file in the /WEB-INF/ folder as shown in listing 4. Follow these steps: Open the existing web.xml file located at /WebContent/WEB-INF/web.xml. Replace the contents of this file with the code as shown below: <servlet> <servlet-name>ViewRendererServlet</servlet-name> <servlet-class>org.springframework.web.servlet.ViewRendererServlet</servlet-class> </servlet> <servlet-mapping> <servlet-name>ViewRendererServlet</servlet-name> <url-pattern>/WEB-INF/servlet/view</url-pattern> </servlet-mapping> <context-param> <param-name>contextConfigLocation</param-name> <param-value>/WEB-INF/applicationContext.xml</param-value> </context-param> <listener> <listener-class>org.springframework.web.context.ContextLoaderListener</listener-class> </listener> The web.xml file for the sample portlet declares two things: ViewRendererServlet. The ViewRendererServlet is the bridge servlet for portlet support. During the render phase, DispatcherPortlet wraps PortletRequest into ServletRequest and forwards control to ViewRendererServlet for actual rendering. This process allows Spring Portlet MVC Framework to use the same View infrastructure as that of its servlet version, that is, Spring Web MVC Framework. ContextLoaderListener. The ContextLoaderListener class takes care of loading Web application context at the time of the Web application startup. The Web application context is shared by all the portlets in the portlet application. In case of duplicate bean definition, the bean definition in the portlet application context takes precedence over the Web application context. The ContextLoader class tries to read the value of the contextConfigLocation Web context parameter to find out the location of the context file. If the contextConfigLocation parameter is not set, then it uses the default value, which is /WEB-INF/applicationContext.xml, to load the context file. The Portlet Controller interface requires two methods that handle the two phases of a portlet request: the action request and the render request. The action phase should be capable of handling an action request and the render phase should be capable of handling a render request and returning an appropriate model and view. While the Controller interface is quite abstract, Spring Portlet MVC offers a lot of controllers that already contain a lot of the functionality you might need – most of these are very similar to controllers from Spring Web MVC. The Controller interface just defines the most common functionality required of every controller - handling an action request, handling a render request, and returning a model and a view. How rendering works As you know, when the user tries to access a page with PointSystemPortletMVC portlet on it or when the user performs some action on any other portlet on that page or tries to refresh that page, a render request is sent to the PointSystemPortletMVC portlet. In the sample code, because DispatcherPortlet is the main portlet class, Weblogic Portal / Webcenter Portal calls its render() method and then the following sequence of events occurs: The render() method of DispatcherPortlet calls the doDispatch() method, which in turn calls the doRender() method. After the doRenderService() method gets control, first it tries to find out the locale of the request by calling the PortletRequest.getLocale() method. This locale is used while making all the locale-related decisions for choices such as which resource bundle should be loaded or which JSP should be displayed to the user based on the locale. After that, the doRenderService() method starts iterating through all the HandlerMapping classes configured for this portlet, calling their getHandler() method to identify the appropriate Controller for handling this request. In the sample code, we have configured only PortletModeHandlerMapping as a HandlerMapping class. The PortletModeHandlerMapping class reads the value of the current portlet mode, and based on that, it finds out, the Controller class that should be used to handle this request. In the sample code, ViewController is configured to handle the View mode request so that the PortletModeHandlerMapping class returns the object of ViewController. After the object of ViewController is returned, the doRenderService() method calls its handleRenderRequestInternal() method. Implementation of the handleRenderRequestInternal() method in ViewController.java is very simple. It logs a message saying that it got control, and then it creates an instance of ModelAndView with a value equal to View and returns it to DispatcherPortlet. After control returns to doRenderService(), the next task is to figure out how to render View. For that, DispatcherPortlet starts iterating through all the ViewResolvers configured in your portlet application, calling their resolveViewName() method. In the sample code we have configured only one ViewResolver, InternalResourceViewResolver. When its resolveViewName() method is called with viewName, it tries to add /WEB-INF/jsp as a prefix to the view name and to add JSP as a suffix. And it checks if /WEB-INF/jsp/View.jsp exists. If it does exist, it returns the object of JstlView wrapping View.jsp. After control is returned to the doRenderService() method, it creates the object PortletRequestDispatcher, which points to /WEB-INF/servlet/view – that is, ViewRendererServlet. Then it sets the object of JstlView in the request and dispatches the request to ViewRendererServlet. After ViewRendererServlet gets control, it reads the JstlView object from the request attribute and creates another RequestDispatcher pointing to the /WEB-INF/jsp/View.jsp URL and passes control to it for actual markup generation. The markup generated by View.jsp is returned to user. At this point, you may question the need for ViewRendererServlet. Why can't DispatcherPortlet directly forward control to View.jsp? Adding ViewRendererServlet in between allows Spring Portlet MVC Framework to reuse the existing View infrastructure. You may appreciate this more when we discuss how easy it is to integrate Apache Tiles Framework with your Spring Portlet MVC Framework. The attached project SpringPortlet.zip should be used to import the project in to your OEPE Workspace. SpringPortlet_Jars.zip contains jar files required for the application. Project is written on Spring 2.5.  The same JSR 168 portlet should work on Webcenter Portal as well.  Downloads: Download WeblogicPotal Project which consists of Spring Portlet. Download Spring Jars In-addition to above you need to download Spring.jar (Spring2.5)

    Read the article

  • The Incremental Architect&acute;s Napkin &ndash; #3 &ndash; Make Evolvability inevitable

    - by Ralf Westphal
    Originally posted on: http://geekswithblogs.net/theArchitectsNapkin/archive/2014/06/04/the-incremental-architectacutes-napkin-ndash-3-ndash-make-evolvability-inevitable.aspxThe easier something to measure the more likely it will be produced. Deviations between what is and what should be can be readily detected. That´s what automated acceptance tests are for. That´s what sprint reviews in Scrum are for. It´s no small wonder our software looks like it looks. It has all the traits whose conformance with requirements can easily be measured. And it´s lacking traits which cannot easily be measured. Evolvability (or Changeability) is such a trait. If an operation is correct, if an operation if fast enough, that can be checked very easily. But whether Evolvability is high or low, that cannot be checked by taking a measure or two. Evolvability might correlate with certain traits, e.g. number of lines of code (LOC) per function or Cyclomatic Complexity or test coverage. But there is no threshold value signalling “evolvability too low”; also Evolvability is hardly tangible for the customer. Nevertheless Evolvability is of great importance - at least in the long run. You can get away without much of it for a short time. Eventually, though, it´s needed like any other requirement. Or even more. Because without Evolvability no other requirement can be implemented. Evolvability is the foundation on which all else is build. Such fundamental importance is in stark contrast with its immeasurability. To compensate this, Evolvability must be put at the very center of software development. It must become the hub around everything else revolves. Since we cannot measure Evolvability, though, we cannot start watching it more. Instead we need to establish practices to keep it high (enough) at all times. Chefs have known that for long. That´s why everybody in a restaurant kitchen is constantly seeing after cleanliness. Hygiene is important as is to have clean tools at standardized locations. Only then the health of the patrons can be guaranteed and production efficiency is constantly high. Still a kitchen´s level of cleanliness is easier to measure than software Evolvability. That´s why important practices like reviews, pair programming, or TDD are not enough, I guess. What we need to keep Evolvability in focus and high is… to continually evolve. Change must not be something to avoid but too embrace. To me that means the whole change cycle from requirement analysis to delivery needs to be gone through more often. Scrum´s sprints of 4, 2 even 1 week are too long. Kanban´s flow of user stories across is too unreliable; it takes as long as it takes. Instead we should fix the cycle time at 2 days max. I call that Spinning. No increment must take longer than from this morning until tomorrow evening to finish. Then it should be acceptance checked by the customer (or his/her representative, e.g. a Product Owner). For me there are several resasons for such a fixed and short cycle time for each increment: Clear expectations Absolute estimates (“This will take X days to complete.”) are near impossible in software development as explained previously. Too much unplanned research and engineering work lurk in every feature. And then pervasive interruptions of work by peers and management. However, the smaller the scope the better our absolute estimates become. That´s because we understand better what really are the requirements and what the solution should look like. But maybe more importantly the shorter the timespan the more we can control how we use our time. So much can happen over the course of a week and longer timespans. But if push comes to shove I can block out all distractions and interruptions for a day or possibly two. That´s why I believe we can give rough absolute estimates on 3 levels: Noon Tonight Tomorrow Think of a meeting with a Product Owner at 8:30 in the morning. If she asks you, how long it will take you to implement a user story or bug fix, you can say, “It´ll be fixed by noon.”, or you can say, “I can manage to implement it until tonight before I leave.”, or you can say, “You´ll get it by tomorrow night at latest.” Yes, I believe all else would be naive. If you´re not confident to get something done by tomorrow night (some 34h from now) you just cannot reliably commit to any timeframe. That means you should not promise anything, you should not even start working on the issue. So when estimating use these four categories: Noon, Tonight, Tomorrow, NoClue - with NoClue meaning the requirement needs to be broken down further so each aspect can be assigned to one of the first three categories. If you like absolute estimates, here you go. But don´t do deep estimates. Don´t estimate dozens of issues; don´t think ahead (“Issue A is a Tonight, then B will be a Tomorrow, after that it´s C as a Noon, finally D is a Tonight - that´s what I´ll do this week.”). Just estimate so Work-in-Progress (WIP) is 1 for everybody - plus a small number of buffer issues. To be blunt: Yes, this makes promises impossible as to what a team will deliver in terms of scope at a certain date in the future. But it will give a Product Owner a clear picture of what to pull for acceptance feedback tonight and tomorrow. Trust through reliability Our trade is lacking trust. Customers don´t trust software companies/departments much. Managers don´t trust developers much. I find that perfectly understandable in the light of what we´re trying to accomplish: delivering software in the face of uncertainty by means of material good production. Customers as well as managers still expect software development to be close to production of houses or cars. But that´s a fundamental misunderstanding. Software development ist development. It´s basically research. As software developers we´re constantly executing experiments to find out what really provides value to users. We don´t know what they need, we just have mediated hypothesises. That´s why we cannot reliably deliver on preposterous demands. So trust is out of the window in no time. If we switch to delivering in short cycles, though, we can regain trust. Because estimates - explicit or implicit - up to 32 hours at most can be satisfied. I´d say: reliability over scope. It´s more important to reliably deliver what was promised then to cover a lot of requirement area. So when in doubt promise less - but deliver without delay. Deliver on scope (Functionality and Quality); but also deliver on Evolvability, i.e. on inner quality according to accepted principles. Always. Trust will be the reward. Less complexity of communication will follow. More goodwill buffer will follow. So don´t wait for some Kanban board to show you, that flow can be improved by scheduling smaller stories. You don´t need to learn that the hard way. Just start with small batch sizes of three different sizes. Fast feedback What has been finished can be checked for acceptance. Why wait for a sprint of several weeks to end? Why let the mental model of the issue and its solution dissipate? If you get final feedback after one or two weeks, you hardly remember what you did and why you did it. Resoning becomes hard. But more importantly youo probably are not in the mood anymore to go back to something you deemed done a long time ago. It´s boring, it´s frustrating to open up that mental box again. Learning is harder the longer it takes from event to feedback. Effort can be wasted between event (finishing an issue) and feedback, because other work might go in the wrong direction based on false premises. Checking finished issues for acceptance is the most important task of a Product Owner. It´s even more important than planning new issues. Because as long as work started is not released (accepted) it´s potential waste. So before starting new work better make sure work already done has value. By putting the emphasis on acceptance rather than planning true pull is established. As long as planning and starting work is more important, it´s a push process. Accept a Noon issue on the same day before leaving. Accept a Tonight issue before leaving today or first thing tomorrow morning. Accept a Tomorrow issue tomorrow night before leaving or early the day after tomorrow. After acceptance the developer(s) can start working on the next issue. Flexibility As if reliability/trust and fast feedback for less waste weren´t enough economic incentive, there is flexibility. After each issue the Product Owner can change course. If on Monday morning feature slices A, B, C, D, E were important and A, B, C were scheduled for acceptance by Monday evening and Tuesday evening, the Product Owner can change her mind at any time. Maybe after A got accepted she asks for continuation with D. But maybe, just maybe, she has gotten a completely different idea by then. Maybe she wants work to continue on F. And after B it´s neither D nor E, but G. And after G it´s D. With Spinning every 32 hours at latest priorities can be changed. And nothing is lost. Because what got accepted is of value. It provides an incremental value to the customer/user. Or it provides internal value to the Product Owner as increased knowledge/decreased uncertainty. I find such reactivity over commitment economically very benefical. Why commit a team to some workload for several weeks? It´s unnecessary at beast, and inflexible and wasteful at worst. If we cannot promise delivery of a certain scope on a certain date - which is what customers/management usually want -, we can at least provide them with unpredecented flexibility in the face of high uncertainty. Where the path is not clear, cannot be clear, make small steps so you´re able to change your course at any time. Premature completion Customers/management are used to premeditating budgets. They want to know exactly how much to pay for a certain amount of requirements. That´s understandable. But it does not match with the nature of software development. We should know that by now. Maybe there´s somewhere in the world some team who can consistently deliver on scope, quality, and time, and budget. Great! Congratulations! I, however, haven´t seen such a team yet. Which does not mean it´s impossible, but I think it´s nothing I can recommend to strive for. Rather I´d say: Don´t try this at home. It might hurt you one way or the other. However, what we can do, is allow customers/management stop work on features at any moment. With spinning every 32 hours a feature can be declared as finished - even though it might not be completed according to initial definition. I think, progress over completion is an important offer software development can make. Why think in terms of completion beyond a promise for the next 32 hours? Isn´t it more important to constantly move forward? Step by step. We´re not running sprints, we´re not running marathons, not even ultra-marathons. We´re in the sport of running forever. That makes it futile to stare at the finishing line. The very concept of a burn-down chart is misleading (in most cases). Whoever can only think in terms of completed requirements shuts out the chance for saving money. The requirements for a features mostly are uncertain. So how does a Product Owner know in the first place, how much is needed. Maybe more than specified is needed - which gets uncovered step by step with each finished increment. Maybe less than specified is needed. After each 4–32 hour increment the Product Owner can do an experient (or invite users to an experiment) if a particular trait of the software system is already good enough. And if so, she can switch the attention to a different aspect. In the end, requirements A, B, C then could be finished just 70%, 80%, and 50%. What the heck? It´s good enough - for now. 33% money saved. Wouldn´t that be splendid? Isn´t that a stunning argument for any budget-sensitive customer? You can save money and still get what you need? Pull on practices So far, in addition to more trust, more flexibility, less money spent, Spinning led to “doing less” which also means less code which of course means higher Evolvability per se. Last but not least, though, I think Spinning´s short acceptance cycles have one more effect. They excert pull-power on all sorts of practices known for increasing Evolvability. If, for example, you believe high automated test coverage helps Evolvability by lowering the fear of inadverted damage to a code base, why isn´t 90% of the developer community practicing automated tests consistently? I think, the answer is simple: Because they can do without. Somehow they manage to do enough manual checks before their rare releases/acceptance checks to ensure good enough correctness - at least in the short term. The same goes for other practices like component orientation, continuous build/integration, code reviews etc. None of that is compelling, urgent, imperative. Something else always seems more important. So Evolvability principles and practices fall through the cracks most of the time - until a project hits a wall. Then everybody becomes desperate; but by then (re)gaining Evolvability has become as very, very difficult and tedious undertaking. Sometimes up to the point where the existence of a project/company is in danger. With Spinning that´s different. If you´re practicing Spinning you cannot avoid all those practices. With Spinning you very quickly realize you cannot deliver reliably even on your 32 hour promises. Spinning thus is pulling on developers to adopt principles and practices for Evolvability. They will start actively looking for ways to keep their delivery rate high. And if not, management will soon tell them to do that. Because first the Product Owner then management will notice an increasing difficulty to deliver value within 32 hours. There, finally there emerges a way to measure Evolvability: The more frequent developers tell the Product Owner there is no way to deliver anything worth of feedback until tomorrow night, the poorer Evolvability is. Don´t count the “WTF!”, count the “No way!” utterances. In closing For sustainable software development we need to put Evolvability first. Functionality and Quality must not rule software development but be implemented within a framework ensuring (enough) Evolvability. Since Evolvability cannot be measured easily, I think we need to put software development “under pressure”. Software needs to be changed more often, in smaller increments. Each increment being relevant to the customer/user in some way. That does not mean each increment is worthy of shipment. It´s sufficient to gain further insight from it. Increments primarily serve the reduction of uncertainty, not sales. Sales even needs to be decoupled from this incremental progress. No more promises to sales. No more delivery au point. Rather sales should look at a stream of accepted increments (or incremental releases) and scoup from that whatever they find valuable. Sales and marketing need to realize they should work on what´s there, not what might be possible in the future. But I digress… In my view a Spinning cycle - which is not easy to reach, which requires practice - is the core practice to compensate the immeasurability of Evolvability. From start to finish of each issue in 32 hours max - that´s the challenge we need to accept if we´re serious increasing Evolvability. Fortunately higher Evolvability is not the only outcome of Spinning. Customer/management will like the increased flexibility and “getting more bang for the buck”.

    Read the article

< Previous Page | 342 343 344 345 346 347 348 349  | Next Page >