Search Results

Search found 9056 results on 363 pages for 'world'.

Page 346/363 | < Previous Page | 342 343 344 345 346 347 348 349 350 351 352 353  | Next Page >

• debian lenny xen bridge networking problem

  - by Sasha

  DomU isn't talking to the world, but it talks to Dom0. Here are the tests that I made: Dom0 (external networking is working): ping 188.40.96.238 #Which is Domu's ip PING 188.40.96.238 (188.40.96.238) 56(84) bytes of data. 64 bytes from 188.40.96.238: icmp_seq=1 ttl=64 time=0.092 ms DomU: ping 188.40.96.215 #Which is Dom0's ip PING 188.40.96.215 (188.40.96.215) 56(84) bytes of data. 64 bytes from 188.40.96.215: icmp_seq=1 ttl=64 time=0.045 ms ping 188.40.96.193 #Which is the gateway - fail PING 188.40.96.193 (188.40.96.193) 56(84) bytes of data. ^C --- 188.40.96.193 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1013ms The system is debian lenny with a normal setup. Here is my configs: uname -a Linux green0 2.6.26-2-xen-686 #1 SMP Wed Aug 19 08:47:57 UTC 2009 i686 GNU/Linux cat /etc/xen/green1.cfg |grep -v '#' kernel = '/boot/vmlinuz-2.6.26-2-xen-686' ramdisk = '/boot/initrd.img-2.6.26-2-xen-686' memory = '2000' root = '/dev/xvda2 ro' disk = [ 'file:/home/xen/domains/green1/swap.img,xvda1,w', 'file:/home/xen/domains/green1/disk.img,xvda2,w', ] name = 'green1' vif = [ 'ip=188.40.96.238,mac=00:16:3E:1F:C4:CC' ] on_poweroff = 'destroy' on_reboot = 'restart' on_crash = 'restart' ifconfig eth0 Link encap:Ethernet HWaddr 00:24:21:ef:2f:86 inet addr:188.40.96.215 Bcast:188.40.96.255 Mask:255.255.255.192 inet6 addr: fe80::224:21ff:feef:2f86/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3296 errors:0 dropped:0 overruns:0 frame:0 TX packets:2204 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:262717 (256.5 KiB) TX bytes:330465 (322.7 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) peth0 Link encap:Ethernet HWaddr 00:24:21:ef:2f:86 inet6 addr: fe80::224:21ff:feef:2f86/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:3407 errors:0 dropped:657431448 overruns:0 frame:0 TX packets:2291 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:319941 (312.4 KiB) TX bytes:338423 (330.4 KiB) Interrupt:16 Base address:0x8000 vif2.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:27 errors:0 dropped:0 overruns:0 frame:0 TX packets:151 errors:0 dropped:33 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:1164 (1.1 KiB) TX bytes:20974 (20.4 KiB) ip a s 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: peth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000 link/ether 00:24:21:ef:2f:86 brd ff:ff:ff:ff:ff:ff inet6 fe80::224:21ff:feef:2f86/64 scope link valid_lft forever preferred_lft forever 4: vif0.0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 5: veth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 6: vif0.1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 7: veth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 8: vif0.2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 9: veth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 10: vif0.3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 11: veth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 12: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 00:24:21:ef:2f:86 brd ff:ff:ff:ff:ff:ff inet 188.40.96.215/26 brd 188.40.96.255 scope global eth0 inet6 fe80::224:21ff:feef:2f86/64 scope link valid_lft forever preferred_lft forever 14: vif2.0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 32 link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff inet6 fe80::fcff:ffff:feff:ffff/64 scope link valid_lft forever preferred_lft forever brctl show bridge name bridge id STP enabled interfaces eth0 8000.002421ef2f86 no peth0 vif2.0 ip r l Dom0: 188.40.96.192/26 dev eth0 proto kernel scope link src 188.40.96.215 default via 188.40.96.193 dev eth0 DomU: 188.40.96.192/26 dev eth0 proto kernel scope link src 188.40.96.238 default via 188.40.96.193 dev eth0

  Read the article

• howto only tunnel specific hosts route through openvpn client on tomato

  - by kcome

  I am relatively newbie in networking world although I did coding and know some sysadmin background for a long time. and here I'm only one step from my destination. The whole picture is : at home I use one LinkSys E3000 as the gateway(don't know yet if this is it's name), wireless AP and no other routing/switching devices. It serves 1 PC and 1 Mac with LAN, 1 Mac Mini + 1 iPad + 2 smartphones with WIFI. My goal is use an openvpn client on the E3000 (with tomato firmware) and make my iPad and smartphone's all WiFi traffic through it, and other devices route remain the same non-openvpn route. So far I'm able to connect openvpn client on E3000 to an openvpn server, tunnel all my devices' all traffic through that openvpn connection. What's left is howto selectively route by source IP (at least in my guessing) to the tunnel while don't bother others. I had learned some 'iptables' and 'route' in past few days however without much luck, so here comes my question. Here are some info which will help you get the structure. ifconfig -a output, some useless lines striped, and in the web interface C0:C1:C0:1A:E0:28 is WAN, C0:C1:C0:1A:E0:27 is LAN, C0:C1:C0:1A:E0:29 is 2.4G wifi AP, C0:C1:C0:1A:E0:2A is 5G wifi AP. root@router:/tmp/home/root# ifconfig -a br0 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:27 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth0 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:27 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth1 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:29 UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 eth2 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:2A UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host ppp0 Link encap:Point-to-Point Protocol inet addr:172.200.1.43 P-t-P:172.200.0.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING MULTICAST MTU:1480 Metric:1 vlan1 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:27 UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 vlan2 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:28 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 wl0.1 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:29 BROADCAST MULTICAST MTU:1500 Metric:1 brctl show output root@router:/tmp/home/root# brctl show bridge name bridge id STP enabled interfaces br0 8000.c0c1c01ae027 no vlan1 eth1 eth2 before openvpn route-up script root@router:/tmp/home/root# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.200.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 172.200.0.1 0.0.0.0 UG 0 0 0 ppp0 openvpn server push PUSH: Received control message: 'PUSH_REPLY,redirect-gateway,dhcp-option DNS 8.8.8.8,route 172.20.0.1,topology net30,ping 10,ping-restart 120,ifconfig 172.20.0.6 172.20.0.5' openvpn's stock route-up script Apr 24 14:52:06 router daemon.notice openvpn[1768]: /sbin/ifconfig tun11 172.20.0.6 pointopoint 172.20.0.5 mtu 1500 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 72.14.177.29 netmask 255.255.255.255 gw 172.200.0.1 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 172.20.0.5 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 172.20.0.5 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 172.20.0.1 netmask 255.255.255.255 gw 172.20.0.5 route after openvpn root@router:/tmp/home/root# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.20.0.5 0.0.0.0 255.255.255.255 UH 0 0 0 tun11 72.14.177.29 172.200.0.1 255.255.255.255 UGH 0 0 0 ppp0 172.200.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 172.20.0.1 172.20.0.5 255.255.255.255 UGH 0 0 0 tun11 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 172.20.0.5 128.0.0.0 UG 0 0 0 tun11 128.0.0.0 172.20.0.5 128.0.0.0 UG 0 0 0 tun11 0.0.0.0 172.200.0.1 0.0.0.0 UG 0 0 0 ppp0 something I had noticed and tried: * on the web interface of openvpn client there is an option "Create NAT on tunnel", if i check this, there is the following script (probably executed after openvpn connection established) root@router:/tmp/home/root# cat /tmp/etc/openvpn/fw/client1-fw.sh #!/bin/sh iptables -I INPUT -i tun11 -j ACCEPT iptables -I FORWARD -i tun11 -j ACCEPT iptables -t nat -I POSTROUTING -s 192.168.1.0/255.255.255.0 -o tun11 -j MASQUERADE if i uncheck this option, the last line will not appear. Then I guess probably the my issue will be solved by iptables and NAT related commands, I just haven't got enough knowledge to figure them out. I tried run iptables -t nat -I POSTROUTING -s 192.168.1.6 -o tun11 -j MASQUERADE manually after openvpn connected (192.168.1.6 is the ip address of my iPad), then my iPad get internet with openvpn tunnel, however all other devices can't reach internet. in case if needed, here is the iptables about NAT root@router:/tmp/home/root# iptables -t nat -L -n Chain PREROUTING (policy ACCEPT) target prot opt source destination DROP all -- 0.0.0.0/0 192.168.1.0/24 WANPREROUTING all -- 0.0.0.0/0 172.200.1.43 upnp all -- 0.0.0.0/0 172.200.1.43 Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- 0.0.0.0/0 0.0.0.0/0 SNAT all -- 192.168.1.0/24 192.168.1.0/24 to:192.168.1.1 Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain WANPREROUTING (1 references) target prot opt source destination DNAT icmp -- 0.0.0.0/0 0.0.0.0/0 to:192.168.1.1 Chain upnp (1 references) target prot opt source destination DNAT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:5353 to:192.168.1.3:5353 Thanks in advance for helping and read this so much, I hope i made every info you need to give a help :)

  Read the article

• Segmentation Fault (11) with modwsgi on CentOS 5.7 when running pyramid app

  - by carbotex

  I'm getting Segmentation fault error when trying to access the "Hello World" pyramid app. This error only occurs when running against CentOS 5.7 setup, but no problem whatsoever when tested against OSX and Arch Linux. Could it be a CentOS specific issue? [error] [client 10.211.55.2] Premature end of script headers: pyramid.wsgi [notice] child pid 31212 exit signal Segmentation fault (11) I have tried to follow the troubleshooting guides posted here http://code.google.com/p/modwsgi/wiki/InstallationIssues which suggests that it might caused by missing Shared Library. A quick check reveals that shared library is not the issue. [centos57@localhost modules]$ ldd mod_wsgi.so linux-gate.so.1 => (0x00e6a000) libpython2.7.so.1.0 => /home/python/lib/libpython2.7.so.1.0 (0x0024c000) libpthread.so.0 => /lib/libpthread.so.0 (0x00da8000) libdl.so.2 => /lib/libdl.so.2 (0x00cd6000) libutil.so.1 => /lib/libutil.so.1 (0x00110000) libm.so.6 => /lib/libm.so.6 (0x0085c000) libc.so.6 => /lib/libc.so.6 (0x00682000) /lib/ld-linux.so.2 (0x0012b000) Then I found another clue that might be able to solve my problem. Unfortunately libexpat is not the source of the problem. http://code.google.com/p/modwsgi/wiki/IssuesWithExpatLibrary [centos57@localhost bin]$ ldd ~/httpd/bin/httpd | grep expat libexpat.so.1 => /usr/local/lib/libexpat.so.1 (0x00b00000) [centos57@localhost bin]$ strings /usr/local/lib/libexpat.so.1 | grep expat libexpat.so.1 expat_2.0.1 [centos57@localhost bin]$ python Python 2.7.2 (default, Nov 26 2011, 08:08:44) [GCC 4.1.2 20080704 (Red Hat 4.1.2-51)] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import pyexpat >>> pyexpat.version_info (2, 0, 0) >>> I've been pulling my hair out trying to figure out what I'm missing in my setup. Why the problem only occurs with CentOS? Here is the detailed setup: Apache 2.2.19 Python 2.7.2 mod_wsgi-3.3 /home/httpd/conf/extra/pyramid.wsgi from pyramid.paster import get_app application = get_app('/home/homecamera/hcadmin/root/production.ini', 'main') /home/httpd/conf/extra/modwsgi.conf LoadModule wsgi_module modules/mod_wsgi.so WSGIScriptAlias /myapp /home/root/test.wsgi <Directory /home/root> WSGIProcessGroup pyramid Order allow,deny Allow from all </Directory> # Use only 1 Python sub-interpreter. Multiple sub-interpreters # play badly with C extensions. WSGIApplicationGroup %{GLOBAL} WSGIPassAuthorization On WSGIDaemonProcess pyramid user=daemon group=daemon processes=1 \ threads=4 \ python-path=/home/python/lib/python2.7/site-packages WSGIScriptAlias /hello /home/httpd/conf/extra/pyramid.wsgi <Directory /home/httpd/conf/extra> WSGIProcessGroup pyramid Order allow,deny Allow from all </Directory> Again this same setup works on OSX and Arch Linux but not on CentOS 5.7. Could someone out there point me to the right direction before I ran out of my hair. ==================================================================================== When apache started with gdb, I got a couple of warnings Reading symbols from /home/httpd/bin/httpd...done. Attaching to program: /home/httpd/bin/httpd, process 1821 warning: .dynamic section for "/lib/libcrypt.so.1" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations warning: .dynamic section for "/lib/libutil.so.1" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations gdb output. After hitting refresh button, to load pyramid. (gdb) cont Continuing. warning: .dynamic section for "/usr/lib/libgssapi_krb5.so.2" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations warning: .dynamic section for "/usr/lib/libkrb5.so.3" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations warning: .dynamic section for "/lib/libresolv.so.2" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x8edbb90 (LWP 1824)] 0x0814c120 in EVP_PKEY_CTX_dup () apache_error_log [info] mod_wsgi (pid=1821): Starting process 'pyramid' with threads=1. [info] mod_wsgi (pid=1821): Initializing Python. [info] mod_wsgi (pid=1821): Attach interpreter ''. [info] mod_wsgi (pid=1821): Create interpreter 'web.domain.com:20000|/hcadmin'. [info] [client 10.211.55.2] mod_wsgi (pid=1821, process='pyramid', application='web.domain.com:20000|/hcadmin'): Loading WSGI script '/home/httpd/conf/extra/pyramid.wsgi'. [error] hello 1

  Read the article

• Three ways to upload/post/convert iMovie to YouTube

  - by user44251

  For Mac users, iMovie is probably a convenient tool for making, editing their own home movies so as to upload to YouTube for sharing with more people. However, uploading iMovie files to YouTube can't be always a smooth run, I did notice many people complaining about it. This article is delivered for guiding those who are haunted by the nightmare by providing three common ways to upload iMovie files to YouTube. YouTube and iMovie YouTube is the most popular video sharing website for users to upload, share and view videos. It empowers anyone with an Internet connection the ability to upload video clips and share them with friends, family and the world. Users are invited to leave comments, pick favourites, send messages to each other and watch videos sorted into subjects and channels. YouTube accepts videos uploaded in most container formats, including WMV (Windows Media Video), 3GP (Cell Phones), AVI (Windows), MOV (Mac), MP4 (iPod/PSP), FLV (Adobe Flash), MKV (H.264). These include video codecs such as MP4, MPEG and WMV. iMovie is a common video editing software application comes with every Mac for users to edit their own home movies. It imports video footage to the Mac using either the Firewire interface on most MiniDV format digital video cameras, the USB port, or by importing the files from a hard drive where users can edit the video clips, add titles, and add music. Since 1999, eight versions of iMovie have been released by Apple, each with its own functions and characteristic, and each of them deal with videos in a way more or less different. But the most common formats handled with iMovie if specialty discarded as far as to my research are MOV, DV, HDV, MPEG-4. Three ways for successful upload iMovie files to YouTube Solution one and solution two suitable for those who are 100 certainty with their iMovie files which are fully compatible with YouTube. For smooth uploading, you are required to get a YouTube account first. Solution 1: Directly upload iMovie to YouTube Step 1: Launch iMovie, select the project you want to upload in YouTube. Step 2: Go to the file menu, click Share, select Export Movie Step 3: Specify the output file name and directory and then type the video type and video size. Solution 2: Post iMovie to YouTube straightly Step 1: Launch iMovie, choose the project you want to post in YouTube Step 2: From the Share menu, choose YouTube Step 3: In the pop-up YouTube windows, specify the name of your YouTube account, the password, choose the Category and fill in the description and tags of the project. Tick Make this movie more private on the bottom of the window, if possible, to limit those who can view the project. Click Next, and then click Publish. iMovie will automatically export and upload the movie to YouTube. Step 4: Click Tell a Friend to email friends and your family about your film. You are also allowed to copy the URL from Tell a Friend window and paste it into an email you created in your favourite email application if you like. Anyone you send to email to will be able to follow the URL directly to your movie. Note: Videos uploaded to YouTube are limited to ten minutes in length and a file size of 2GB. Solution 3: Upload to iMovie after conversion If neither of the above mentioned method works, there is still a third way to turn to. Sometimes, your iMovie files may not be recognized by YouTube due to the versions of iMovie (settings and functions may varies among versions), video itself (video format difference because of file extension, resolution, video size and length), compatibility (videos that are completely incompatible with YouTube). In this circumstance, the best and reliable method is to convert your iMovie files to YouTube accepted files, iMovie to YouTube converter will be inevitably the ideal choice. iMovie to YouTube converter is an elaborately designed tool for convert iMovie files to YouTube workable WMV, 3GP, AVI, MOV, MP4, FLV, MKV for smooth uploading with hard-to-believe conversion speed and second to none output quality. It can also convert between almost all popular popular file formats like AVI, WMV, MPG, MOV, VOB, DV, MP4, FLV, 3GP, RM, ASF, SWF, MP3, AAC, AC3, AIFF, AMR, WAV, WMA etc so as to put on various portable devices, import to video editing software or play on vast amount video players. iMovie to YouTube converter can also served as an excellent video editing tool to meet your specific program requirements. For example, you can cut your video files to a certain length, or split your video files to smaller ones and select the proper resolution suitable for demands of YouTube by Clip or Settings separately. Crop allows you to cut off unwanted black edges from your videos. Besides, you can also have a good command of the whole process or snapshot your favourite pictures from the preview window. More can be expected if you have a try.

  Read the article

• OpenIndiana (illumos): vmxnet3 interface lost on reboot

  - by protomouse

  I want my VMware vmxnet3 interface to be brought up with DHCP on boot. I can manually configure the NIC with: # ifconfig vmxnet3s0 plumb # ipadm create-addr -T dhcp vmxnet3s0/v4dhcp But after creating /etc/dhcp.vmxnet3s0 and rebooting, the interface is down and the logs show: Aug 13 09:34:15 neumann vmxnet3s: [ID 654879 kern.notice] vmxnet3s:0: getcapab(0x200000) -> no Aug 13 09:34:15 neumann vmxnet3s: [ID 715698 kern.notice] vmxnet3s:0: stop() Aug 13 09:34:17 neumann vmxnet3s: [ID 654879 kern.notice] vmxnet3s:0: getcapab(0x200000) -> no Aug 13 09:34:17 neumann vmxnet3s: [ID 920500 kern.notice] vmxnet3s:0: start() Aug 13 09:34:17 neumann vmxnet3s: [ID 778983 kern.notice] vmxnet3s:0: getprop(TxRingSize) -> 256 Aug 13 09:34:17 neumann vmxnet3s: [ID 778983 kern.notice] vmxnet3s:0: getprop(RxRingSize) -> 256 Aug 13 09:34:17 neumann vmxnet3s: [ID 778983 kern.notice] vmxnet3s:0: getprop(RxBufPoolLimit) -> 512 Aug 13 09:34:17 neumann nwamd[491]: [ID 605049 daemon.error] 1: nwamd_set_unset_link_properties: dladm_set_linkprop failed: operation not supported Aug 13 09:34:17 neumann vmxnet3s: [ID 654879 kern.notice] vmxnet3s:0: getcapab(0x20000) -> no Aug 13 09:34:17 neumann nwamd[491]: [ID 751932 daemon.error] 1: nwamd_down_interface: ipadm_delete_addr failed on vmxnet3s0: Object not found Aug 13 09:34:17 neumann nwamd[491]: [ID 819019 daemon.error] 1: nwamd_plumb_unplumb_interface: plumb IPv4 failed for vmxnet3s0: Operation not supported on disabled object Aug 13 09:34:17 neumann nwamd[491]: [ID 160156 daemon.error] 1: nwamd_plumb_unplumb_interface: plumb IPv6 failed for vmxnet3s0: Operation not supported on disabled object Aug 13 09:34:17 neumann nwamd[491]: [ID 771489 daemon.error] 1: add_ip_address: ipadm_create_addr failed on vmxnet3s0: Operation not supported on disabled object Aug 13 09:34:17 neumann nwamd[491]: [ID 405346 daemon.error] 9: start_dhcp: ipadm_create_addr failed for vmxnet3s0: Operation not supported on disabled object I then tried disabling network/physical:nwam in favour of network/physical:default. This works, the interface is brought up but physical:default fails and my network services (e.g. NFS) refuse to start. # ifconfig -a lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 vmxnet3s0: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:1: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:2: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:3: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:4: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:5: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:6: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:7: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 vmxnet3s0:8: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2 inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255 lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1 inet6 ::1/128 vmxnet3s0: flags=20002000840<RUNNING,MULTICAST,IPv6> mtu 9000 index 2 inet6 ::/0 # cat /var/svc/log/network-physical\:default.log [ Aug 16 09:46:39 Enabled. ] [ Aug 16 09:46:41 Executing start method ("/lib/svc/method/net-physical"). ] [ Aug 16 09:46:41 Timeout override by svc.startd. Using infinite timeout. ] starting DHCP on primary interface vmxnet3s0 ifconfig: vmxnet3s0: DHCP is already running [ Aug 16 09:46:43 Method "start" exited with status 96. ] NFS server not running: # svcs -xv network/nfs/server svc:/network/nfs/server:default (NFS server) State: offline since August 16, 2012 09:46:40 AM UTC Reason: Service svc:/network/physical:default is not running because a method failed. See: http://illumos.org/msg/SMF-8000-GE Path: svc:/network/nfs/server:default svc:/milestone/network:default svc:/network/physical:default Reason: Service svc:/network/physical:nwam is disabled. See: http://illumos.org/msg/SMF-8000-GE Path: svc:/network/nfs/server:default svc:/milestone/network:default svc:/network/physical:nwam Reason: Service svc:/network/nfs/nlockmgr:default is disabled. See: http://illumos.org/msg/SMF-8000-GE Path: svc:/network/nfs/server:default svc:/network/nfs/nlockmgr:default See: man -M /usr/share/man -s 1M nfsd Impact: This service is not running. I'm new to the world of Solaris, so any help solving would be much appreciated. Thanks!

  Read the article

• SSH service will not start on fresh Cygwin 1.7.15 install

  - by Coder6841

  OS: Windows 7 x64 Cygwin: 1.7.15-1 OpenSSH: 6.0p1-1 I'm attempting to install an SSH server on Windows 7. The tutorial that I'm following to do this is here: http://www.howtogeek.com/howto/41560/how-to-get-ssh-command-line-access-to-windows-7-using-cygwin/ The issue is that upon executing the net start sshd command I get the following output:The CYGWIN sshd service is starting. The CYGWIN sshd service could not be started. The service did not report an error. More help is available by typing NET HELPMSG 3534. Here is the full output of the setup: AdminUser@ThisComputer ~ $ ssh-host-config *** Info: Generating /etc/ssh_host_key *** Info: Generating /etc/ssh_host_rsa_key *** Info: Generating /etc/ssh_host_dsa_key *** Info: Generating /etc/ssh_host_ecdsa_key *** Info: Creating default /etc/ssh_config file *** Info: Creating default /etc/sshd_config file *** Info: Privilege separation is set to yes by default since OpenSSH 3.3. *** Info: However, this requires a non-privileged account called 'sshd'. *** Info: For more info on privilege separation read /usr/share/doc/openssh/README.privsep. *** Query: Should privilege separation be used? (yes/no) yes *** Info: Note that creating a new user requires that the current account have *** Info: Administrator privileges. Should this script attempt to create a *** Query: new local account 'sshd'? (yes/no) yes *** Info: Updating /etc/sshd_config file *** Query: Do you want to install sshd as a service? *** Query: (Say "no" if it is already installed as a service) (yes/no) yes *** Query: Enter the value of CYGWIN for the daemon: [] *** Info: On Windows Server 2003, Windows Vista, and above, the *** Info: SYSTEM account cannot setuid to other users -- a capability *** Info: sshd requires. You need to have or to create a privileged *** Info: account. This script will help you do so. *** Info: You appear to be running Windows XP 64bit, Windows 2003 Server, *** Info: or later. On these systems, it's not possible to use the LocalSystem *** Info: account for services that can change the user id without an *** Info: explicit password (such as passwordless logins [e.g. public key *** Info: authentication] via sshd). *** Info: If you want to enable that functionality, it's required to create *** Info: a new account with special privileges (unless a similar account *** Info: already exists). This account is then used to run these special *** Info: servers. *** Info: Note that creating a new user requires that the current account *** Info: have Administrator privileges itself. *** Info: No privileged account could be found. *** Info: This script plans to use 'cyg_server'. *** Info: 'cyg_server' will only be used by registered services. *** Query: Do you want to use a different name? (yes/no) no *** Query: Create new privileged user account 'cyg_server'? (yes/no) yes *** Info: Please enter a password for new user cyg_server. Please be sure *** Info: that this password matches the password rules given on your system. *** Info: Entering no password will exit the configuration. *** Query: Please enter the password: *** Query: Reenter: *** Info: User 'cyg_server' has been created with password '[CENSORED]'. *** Info: If you change the password, please remember also to change the *** Info: password for the installed services which use (or will soon use) *** Info: the 'cyg_server' account. *** Info: Also keep in mind that the user 'cyg_server' needs read permissions *** Info: on all users' relevant files for the services running as 'cyg_server'. *** Info: In particular, for the sshd server all users' .ssh/authorized_keys *** Info: files must have appropriate permissions to allow public key *** Info: authentication. (Re-)running ssh-user-config for each user will set *** Info: these permissions correctly. [Similar restrictions apply, for *** Info: instance, for .rhosts files if the rshd server is running, etc]. *** Info: The sshd service has been installed under the 'cyg_server' *** Info: account. To start the service now, call `net start sshd' or *** Info: `cygrunsrv -S sshd'. Otherwise, it will start automatically *** Info: after the next reboot. *** Info: Host configuration finished. Have fun! AdminUser@ThisComputer ~ $ net start sshd The CYGWIN sshd service is starting. The CYGWIN sshd service could not be started. The service did not report an error. More help is available by typing NET HELPMSG 3534. Note that on the line *** Query: Enter the value of CYGWIN for the daemon: [] I haven't entered anything. Tutorials often say to use ntsec or ntsec tty here but those options are removed from the latest version of OpenSSH. I've tried using them anyway and the result is the same. The file /var/log/sshd.log is empty. If I try just running the command /usr/sbin/sshd I get the output /var/empty must be owned by root and not group or world-writable.. The /var/empty directory has the following permissions: drwxr-xr-x+ 1 cyg_server root 0 May 29 15:28 empty. Google searches on this error did not turn up any working fixes. One person seems to have solved it by using the command chown SYSTEM /var/empty but that did not fix it in my case.

  Read the article

• arp problems with transparent bridge on linux

  - by Mink

  I've been trying to secure my virtual machines on my esx server by putting them behind a transparent bridge with 2 interfaces, one in front, one at the back. My intention is to put all the firewall rules in one place (instead of on each virtual server). I've been using as bridge a blank new virtual machine based on arch linux (but I suspect it doesn't matter which brand of linux it is). What I have is 2 virtual switchs (thus two Virtual Network, VN_front and VN_back), each with 2 types of ports (switched/separated or promiscious/where the machine can see all packets). On my bridge machine, I've set up 2 virtual NIC, one on VN_front, one on VN_back, both in promisc mode. I've created a bridge br0 with both NIC in it: brctl addbr br0 brctl stp br0 off brctl addif br0 front_if brctl addif br0 back_if Then brought them up: ifconfig front_if 0.0.0.0 promisc ifconfig back_if 0.0.0.0 promisc ifconfig br0 0.0.0.0 (I use promisc mode, because I'm not sure I can do without, thinking that maybe the packets don't reach the NICs) Then I took one of my virtual server sitting on VN_front, and plugged it to VN_back instead (that's the nifty use case I'm thinking about, being able to move my servers around just by changing the VN they are plugged into, without changing anything in the configuration). Then I looked into the macs "seen" by my addressless bridge using brctl showmacs br0 and it did show my server from both sides: I get something that looks like this : port no mac addr is local? ageing timer 2 00:0c:29:e1:54:75 no 9.27 1 00:0c:29:fd:86:0c no 9.27 2 00:50:56:90:05:86 no 73.38 1 00:50:56:90:05:88 no 0.10 2 00:50:56:90:05:8b yes 0.00 << FRONT VN 1 00:50:56:90:05:8c yes 0.00 << BACK VN 2 00:50:56:90:19:18 no 13.55 2 00:50:56:90:3c:cf no 13.57 the thing is that the server that are plugged in front/back are not shown on the correct port. I suspect some horrible thing happening in the ARP-world... :-/ If I ping from a front virtual server to a back virtual server, I can only see the back machine if that back machine pings something in the front. As soon as I stop the ping from the back machine, the ping from the front machine stops getting through... I've noticed that if the back machine pings, then its port on the bridge is the correct one... I've tried to play with the arp_ switch of /proc/sys, but with no clear effect on the end result... /proc/sys/net/ipv4/ip_forward doesn't seem to be of any use when using a bridge (seems it's all taken care of by brctl) /proc/sys/net/ipv4/conf//arp_ don't seem to change much either... (tried arp_announce to 2 or 8 - like suggested elsewhere - and arp_ignore to 0 or 1 ) All the examples I've seen have a different subnet on either side like 10.0.1.0/24 and 10.0.2.0/24... In my case I want 10.0.1.0/24 on both side (just like a transparent switch - except it's a hidden fw ). Turning stp on/off doesn't seem to have any impact on my issue. It's as if the arp packets where getting through the bridge, corrupting the other side with false data... I've tried to use the -arp on each interface, br0, front, back... it breaks the thing altogether... I suspect it has something to do with both side being on the same subnet... I've thought about putting all my machine behind the fw, so as to have all the same subnet at the back... but I'm stuck with my provider's gateway standing at the front with part of my subnet (in fact 3 appliance to route the whole subnet), so I'll always have ips from the same subnet on both side, whatever I do... (I'm using fixed front IPs on my delegated subnet). I'm at a loss... -_-'' Thx for your help. (As anyone tried something like this? from within ESXi?) (It's not just a stunt, the idea is to have something like fail2ban running on some servers, sending their banned IP to the bridge/fw so that it too could ban them - saving all the other servers from that same attacker in one go, allowing for some honeypot that would trigger the fw from any kind of suitable response, and stuffs of the sort... I am aware I could use something like snort, but it addresses some completely different kind of problems, in a completely different way... )

  Read the article

• Three ways to upload/post/convert iMovie to YouTube [closed]

  - by alexyu2010

  For Mac users, iMovie is probably a convenient tool for making, editing their own home movies so as to upload to YouTube for sharing with more people. However, uploading iMovie files to YouTube can't be always a smooth run, I did notice many people complaining about it. This article is delivered for guiding those who are haunted by the nightmare by providing three common ways to upload iMovie files to YouTube. YouTube and iMovie YouTube is the most popular video sharing website for users to upload, share and view videos. It empowers anyone with an Internet connection the ability to upload video clips and share them with friends, family and the world. Users are invited to leave comments, pick favourites, send messages to each other and watch videos sorted into subjects and channels. YouTube accepts videos uploaded in most container formats, including WMV (Windows Media Video), 3GP (Cell Phones), AVI (Windows), MOV (Mac), MP4 (iPod/PSP), FLV (Adobe Flash), MKV (H.264). These include video codecs such as MP4, MPEG and WMV. iMovie is a common video editing software application comes with every Mac for users to edit their own home movies. It imports video footage to the Mac using either the Firewire interface on most MiniDV format digital video cameras, the USB port, or by importing the files from a hard drive where users can edit the video clips, add titles, and add music. Since 1999, eight versions of iMovie have been released by Apple, each with its own functions and characteristic, and each of them deal with videos in a way more or less different. But the most common formats handled with iMovie if specialty discarded as far as to my research are MOV, DV, HDV, MPEG-4. Three ways for successful upload iMovie files to YouTube Solution one and solution two suitable for those who are 100 certainty with their iMovie files which are fully compatible with YouTube. For smooth uploading, you are required to get a YouTube account first. Solution 1: Directly upload iMovie to YouTube Step 1: Launch iMovie, select the project you want to upload in YouTube. Step 2: Go to the file menu, click Share, select Export Movie Step 3: Specify the output file name and directory and then type the video type and video size. Solution 2: Post iMovie to YouTube straightly Step 1: Launch iMovie, choose the project you want to post in YouTube Step 2: From the Share menu, choose YouTube Step 3: In the pop-up YouTube windows, specify the name of your YouTube account, the password, choose the Category and fill in the description and tags of the project. Tick Make this movie more private on the bottom of the window, if possible, to limit those who can view the project. Click Next, and then click Publish. iMovie will automatically export and upload the movie to YouTube. Step 4: Click Tell a Friend to email friends and your family about your film. You are also allowed to copy the URL from Tell a Friend window and paste it into an email you created in your favourite email application if you like. Anyone you send to email to will be able to follow the URL directly to your movie. Note: Videos uploaded to YouTube are limited to ten minutes in length and a file size of 2GB. Solution 3: Upload to iMovie after conversion If neither of the above mentioned method works, there is still a third way to turn to. Sometimes, your iMovie files may not be recognized by YouTube due to the versions of iMovie (settings and functions may varies among versions), video itself (video format difference because of file extension, resolution, video size and length), compatibility (videos that are completely incompatible with YouTube). In this circumstance, the best and reliable method is to convert your iMovie files to YouTube accepted files, iMovie to YouTube converter will be inevitably the ideal choice. iMovie to YouTube converter is an elaborately designed tool for convert iMovie files to YouTube workable WMV, 3GP, AVI, MOV, MP4, FLV, MKV for smooth uploading with hard-to-believe conversion speed and second to none output quality. It can also convert between almost all popular popular file formats like AVI, WMV, MPG, MOV, VOB, DV, MP4, FLV, 3GP, RM, ASF, SWF, MP3, AAC, AC3, AIFF, AMR, WAV, WMA etc so as to put on various portable devices, import to video editing software or play on vast amount video players. iMovie to YouTube converter can also served as an excellent video editing tool to meet your specific program requirements. For example, you can cut your video files to a certain length, or split your video files to smaller ones and select the proper resolution suitable for demands of YouTube by Clip or Settings separately. Crop allows you to cut off unwanted black edges from your videos. Besides, you can also have a good command of the whole process or snapshot your favourite pictures from the preview window. More can be expected if you have a try.

  Read the article

• How to open a server port outside of an OpenVPN tunnel with a pf firewall on OSX (BSD)

  - by Timbo

  I have a Mac mini that I use as a media server running XBMC and serves media from my NAS to my stereo and TV (which has been color calibrated with a Spyder3Express, happy). The Mac runs OSX 10.8.2 and the internet connection is tunneled for general privacy over OpenVPN through Tunnelblick. I believe my anonymous VPN provider pushes "redirect_gateway" to OpenVPN/Tunnelblick because when on it effectively tunnels all non-LAN traffic in- and outbound. As an unwanted side effect that also opens the boxes server ports unprotected to the outside world and bypasses my firewall-router (Netgear SRX5308). I have run nmap from outside the LAN on the VPN IP and the server ports on the mini are clearly visible and connectable. The mini has the following ports open: ssh/22, ARD/5900 and 8080+9090 for the XBMC iOS client Constellation. I also have Synology NAS which apart from LAN file serving over AFP and WebDAV only serves up an OpenVPN/1194 and a PPTP/1732 server. When outside of the LAN I connect to this from my laptop over OpenVPN and over PPTP from my iPhone. I only want to connect through AFP/548 from the mini to the NAS. The border firewall (SRX5308) just works excellently, stable and with a very high throughput when streaming from various VOD services. My connection is a 100/10 with a close to theoretical max throughput. The ruleset is as follows Inbound: PPTP/1723 Allow always to 10.0.0.40 (NAS/VPN server) from a restricted IP range >corresponding to possible cell provider range OpenVPN/1194 Allow always to 10.0.0.40 (NAS/VPN server) from any Outbound: Default outbound policy: Allow Always OpenVPN/1194 TCP Allow always from 10.0.0.40 (NAS) to a.b.8.1-a.b.8.254 (VPN provider) OpenVPN/1194 UDP Allow always to 10.0.0.40 (NAS) to a.b.8.1-a.b.8.254 (VPN provider) Block always from NAS to any On the Mini I have disabled the OSX Application Level Firewall because it throws popups which don't remember my choices from one time to another and that's annoying on a media server. Instead I run Little Snitch which controls outgoing connections nicely on an application level. I have configured the excellent OSX builtin firewall pf (from BSD) as follows pf.conf (Apple App firewall tie-ins removed) (# replaced with % to avoid formatting errors) ### macro name for external interface. eth_if = "en0" vpn_if = "tap0" ### wifi_if = "en1" ### %usb_if = "en3" ext_if = $eth_if LAN="{10.0.0.0/24}" ### General housekeeping rules ### ### Drop all blocked packets silently set block-policy drop ### all incoming traffic on external interface is normalized and fragmented ### packets are reassembled. scrub in on $ext_if all fragment reassemble scrub in on $vpn_if all fragment reassemble scrub out all ### exercise antispoofing on the external interface, but add the local ### loopback interface as an exception, to prevent services utilizing the ### local loop from being blocked accidentally. ### set skip on lo0 antispoof for $ext_if inet antispoof for $vpn_if inet ### spoofing protection for all interfaces block in quick from urpf-failed ############################# block all ### Access to the mini server over ssh/22 and remote desktop/5900 from LAN/en0 only pass in on $eth_if proto tcp from $LAN to any port {22, 5900, 8080, 9090} ### Allow all udp and icmp also, necessary for Constellation. Could be tightened. pass on $eth_if proto {udp, icmp} from $LAN to any ### Allow AFP to 10.0.0.40 (NAS) pass out on $eth_if proto tcp from any to 10.0.0.40 port 548 ### Allow OpenVPN tunnel setup over unprotected link (en0) only to VPN provider IPs ### and port ranges pass on $eth_if proto tcp from any to a.b.8.0/24 port 1194:1201 ### OpenVPN Tunnel rules. All traffic allowed out, only in to ports 4100-4110 ### Outgoing pings ok pass in on $vpn_if proto {tcp, udp} from any to any port 4100:4110 pass out on $vpn_if proto {tcp, udp, icmp} from any to any So what are my goals and what does the above setup achieve? (until you tell me otherwise :) 1) Full LAN access to the above ports on the mini/media server (including through my own VPN server) 2) All internet traffic from the mini/media server is anonymized and tunneled over VPN 3) If OpenVPN/Tunnelblick on the mini drops the connection, nothing is leaked both because of pf and the router outgoing ruleset. It can't even do a DNS lookup through the router. So what do I have to hide with all this? Nothing much really, I just got carried away trying to stop port scans through the VPN tunnel :) In any case this setup works perfectly and it is very stable. The Problem at last! I want to run a minecraft server and I installed that on a separate user account on the mini server (user=mc) to keep things partitioned. I don't want this server accessible through the anonymized VPN tunnel because there are lots more port scans and hacking attempts through that than over my regular IP and I don't trust java in general. So I added the following pf rule on the mini: ### Allow Minecraft public through user mc pass in on $eth_if proto {tcp,udp} from any to any port 24983 user mc pass out on $eth_if proto {tcp, udp} from any to any user mc And these additions on the border firewall: Inbound: Allow always TCP/UDP from any to 10.0.0.40 (NAS) Outbound: Allow always TCP port 80 from 10.0.0.40 to any (needed for online account checkups) This works fine but only when the OpenVPN/Tunnelblick tunnel is down. When up no connection is possbile to the minecraft server from outside of LAN. inside LAN is always OK. Everything else functions as intended. I believe the redirect_gateway push is close to the root of the problem, but I want to keep that specific VPN provider because of the fantastic throughput, price and service. The Solution? How can I open up the minecraft server port outside of the tunnel so it's only available over en0 not the VPN tunnel? Should I a static route? But I don't know which IPs will be connecting...stumbles How secure would to estimate this setup to be and do you have other improvements to share? I've searched extensively in the last few days to no avail...If you've read this far I bet you know the answer :)

  Read the article

• Someone tried to hack my Node.js server, need to understand a GET request in the logs

  - by Akay

  Alright, so I left my Node.js server alone for a while and came back to find some really interesting stuff in the logs. Apparently some moron from China or Poland tried to hack my server using directory traversal and what not, while it seems though he did not succeed I am unable understand few entries in the log. This is the output of a "hohup.out" file. The attack starts, apparently he is trying to find out some console entry in my server. All of which fail and return a 404. [90mGET /../../../../../../../../../../../ [31m500 [90m6ms - 2b[0m [90mGET /<script>alert(53416)</script> [33m404 [90m7ms[0m [90mGET / [32m200 [90m2ms - 240b[0m [90mGET / [32m200 [90m1ms - 240b[0m [90mGET / [32m200 [90m2ms - 240b[0m [90mGET /pz3yvy3lyzgja41w2sp [33m404 [90m1ms[0m [90mGET /stylesheets/style.css [33m404 [90m0ms[0m [90mGET /index.html [33m404 [90m1ms[0m [90mGET /index.htm [33m404 [90m0ms[0m [90mGET /default.html [33m404 [90m0ms[0m [90mGET /default.htm [33m404 [90m1ms[0m [90mGET /default.asp [33m404 [90m1ms[0m [90mGET /index.php [33m404 [90m0ms[0m [90mGET /default.php [33m404 [90m1ms[0m [90mGET /index.asp [33m404 [90m0ms[0m [90mGET /index.cgi [33m404 [90m0ms[0m [90mGET /index.jsp [33m404 [90m1ms[0m [90mGET /index.php3 [33m404 [90m0ms[0m [90mGET /index.pl [33m404 [90m0ms[0m [90mGET /default.jsp [33m404 [90m0ms[0m [90mGET /default.php3 [33m404 [90m0ms[0m [90mGET /index.html.en [33m404 [90m0ms[0m [90mGET /web.gif [33m404 [90m34ms[0m [90mGET /header.html [33m404 [90m1ms[0m [90mGET /homepage.nsf [33m404 [90m1ms[0m [90mGET /homepage.htm [33m404 [90m1ms[0m [90mGET /homepage.asp [33m404 [90m1ms[0m [90mGET /home.htm [33m404 [90m0ms[0m [90mGET /home.html [33m404 [90m1ms[0m [90mGET /home.asp [33m404 [90m1ms[0m [90mGET /login.asp [33m404 [90m0ms[0m [90mGET /login.html [33m404 [90m0ms[0m [90mGET /login.htm [33m404 [90m1ms[0m [90mGET /login.php [33m404 [90m0ms[0m [90mGET /index.cfm [33m404 [90m0ms[0m [90mGET /main.php [33m404 [90m1ms[0m [90mGET /main.asp [33m404 [90m1ms[0m [90mGET /main.htm [33m404 [90m1ms[0m [90mGET /main.html [33m404 [90m2ms[0m [90mGET /Welcome.html [33m404 [90m1ms[0m [90mGET /welcome.htm [33m404 [90m1ms[0m [90mGET /start.htm [33m404 [90m1ms[0m [90mGET /fleur.png [33m404 [90m0ms[0m [90mGET /level/99/ [33m404 [90m1ms[0m [90mGET /chl.css [33m404 [90m0ms[0m [90mGET /images/ [33m404 [90m0ms[0m [90mGET /robots.txt [33m404 [90m2ms[0m [90mGET /hb1/presign.asp [33m404 [90m1ms[0m [90mGET /NFuse/ASP/login.htm [33m404 [90m0ms[0m [90mGET /CCMAdmin/main.asp [33m404 [90m1ms[0m [90mGET /TiVoConnect?Command=QueryServer [33m404 [90m1ms[0m [90mGET /admin/images/rn_logo.gif [33m404 [90m1ms[0m [90mGET /vncviewer.jar [33m404 [90m1ms[0m [90mGET / [32m200 [90m2ms - 240b[0m [90mGET / [32m200 [90m2ms - 240b[0m [90mGET / [32m200 [90m7ms - 240b[0m [90mOPTIONS / [32m200 [90m1ms - 3b[0m [90mTRACE / [33m404 [90m0ms[0m [90mPROPFIND / [33m404 [90m0ms[0m [90mGET /\./ [33m404 [90m1ms[0m But here is when things start getting fishy. [90mGET http://www.google.com/ [32m200 [90m2ms - 240b[0m [90mGET http://www.google.com/ [32m200 [90m1ms - 240b[0m [90mGET http://www.google.com/ [32m200 [90m1ms - 240b[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET http://www.google.com/ [32m200 [90m1ms - 240b[0m [90mGET / [32m200 [90m2ms - 240b[0m [90mGET / [32m200 [90m1ms - 240b[0m [90mGET /robots.txt [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET http://www.google.com/ [32m200 [90m1ms - 240b[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m0ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m3ms[0m [90mGET /manager/html [33m404 [90m0ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m0ms[0m [90mGET http://www.google.com/ [32m200 [90m1ms - 240b[0m [90mGET http://37.28.156.211/sprawdza.php [33m404 [90m1ms[0m [90mGET http://www.google.com/ [32m200 [90m1ms - 240b[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET http://www.google.com/ [32m200 [90m2ms - 240b[0m [90mHEAD / [32m200 [90m1ms - 240b[0m [90mGET http://www.daydaydata.com/proxy.txt [33m404 [90m19ms[0m [90mHEAD / [32m200 [90m1ms - 240b[0m [90mGET /manager/html [33m404 [90m2ms[0m [90mGET / [32m200 [90m4ms - 240b[0m [90mGET http://www.google.pl/search?q=wp.pl [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m0ms[0m [90mHEAD / [32m200 [90m2ms - 240b[0m [90mGET http://www.google.pl/search?q=onet.pl [33m404 [90m1ms[0m [90mHEAD / [32m200 [90m2ms - 240b[0m [90mGET http://www.google.com/ [32m200 [90m1ms - 240b[0m [90mGET http://www.google.pl/search?q=ostro%C5%82%C4%99ka [33m404 [90m1ms[0m [90mGET http://www.google.pl/search?q=google [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET http://www.google.com/ [32m200 [90m2ms - 240b[0m [90mHEAD / [32m200 [90m2ms - 240b[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m0ms[0m [90mGET / [32m200 [90m2ms - 240b[0m [90mGET http://www.baidu.com/ [32m200 [90m2ms - 240b[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mPOST /api/login [32m200 [90m1ms - 28b[0m [90mGET /web-console/ServerInfo.jsp [33m404 [90m2ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET http://www.google.com/ [32m200 [90m10ms - 240b[0m [90mGET http://www.google.com/ [32m200 [90m1ms - 240b[0m [90mGET / [32m200 [90m2ms - 240b[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET http://proxyjudge.info [32m200 [90m2ms - 240b[0m [90mGET / [32m200 [90m2ms - 240b[0m [90mGET / [32m200 [90m1ms - 240b[0m [90mGET http://www.google.com/ [32m200 [90m3ms - 240b[0m [90mGET http://www.google.com/ [32m200 [90m3ms - 240b[0m [90mGET http://www.baidu.com/ [32m200 [90m1ms - 240b[0m [90mGET /manager/html [33m404 [90m0ms[0m [90mGET /manager/html [33m404 [90m1ms[0m [90mGET http://www.google.com/ [32m200 [90m2ms - 240b[0m [90mHEAD / [32m200 [90m1ms - 240b[0m [90mGET http://www.google.com/ [32m200 [90m1ms - 240b[0m [90mGET http://www.google.com/search?tbo=d&source=hp&num=1&btnG=Search&q=niceman [33m404 [90m2ms[0m So my questions are, how come my server is returning a "200" OK for root level domains? How did the hacker even manage to send a GET request to my server such that "http://www.google.com" shows up in the log while my server is simply an API that works on relative URLs such as "/api/login". And, while I looked up the OPTIONS, TRACE and PROPFIND HTTP requests that my server has logged it would be great if someone could explain what exactly was the hacker trying to achieve by using these verbs? Also what in the world does "[90m [32m [90m1ms - 240b[0m" mean? The "ms" makes sense, probably milliseconds for the request, rest I am unable to understand. Thank you!

  Read the article

• SSRS ReportViewer 2010 Iframe IE Problem

  - by Phil

  Hello all, My problem relates to trying to include an SSRS (SQL Server) Report inside my MVC application. I've settled on the hybrid solution of having a WebForm with the ReportViewer Control in and then on my MVC View pages having an iframe reference this WebForm page. The tricky part is that the iframe needs to be dynamically populated with the report rather than using src due to posting parameters to the WebForm. It works perfectly in Firefox and Chrome, however IE throws a "Sys is Undefined" javascript error. Using src on the iframe works in IE, but I can't find a way to post parameters (don't want to use something like /Report.aspx?param1=test due to the possible length). Its a ASP.NET MVC 2 project, .NET 4, Visual Studio 2010 on Windows 7 x74 if its any help. So here is the code (I could provide the VS2010 project files if anyone wants them) In my webform: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="Report.aspx.cs" Inherits="SSRSMVC.Views.Home.Report" %> <%@ Register Assembly="Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" Namespace="Microsoft.Reporting.WebForms" TagPrefix="rsweb" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <body> <form id="RSForm" runat="server"> <asp:ScriptManager ID="ScriptManager" runat="server" EnablePartialRendering="true" ScriptMode="Release"> </asp:ScriptManager> <asp:UpdatePanel ID="ReportViewerUP" runat="server"> <ContentTemplate> <rsweb:ReportViewer ID="ReportViewer" runat="server" Width="100%" Height="380px" ProcessingMode="Local" InteractivityPostBackMode="AlwaysAsynchronous" AsyncRendering="true"> <LocalReport ReportPath="Models\\TestReport.rdlc"> </LocalReport> </rsweb:ReportViewer> </ContentTemplate> </asp:UpdatePanel> </form> </body> </html> And Codebehind: using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.UI; using System.Web.UI.WebControls; using Microsoft.Reporting.WebForms; namespace SSRSMVC.Views.Home { public partial class Report : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { if (!Page.IsPostBack) { string test = Request.Params["val1"]; ReportViewer.LocalReport.DataSources.Add(new ReportDataSource("DataSet1", new SSRSMVC.Models.DataProvider().GetData())); } } } } And lastly my View page, <script type="text/javascript"> $(window).load(function () { $.post('/Report.aspx', { val1: "Hello World" }, function (data) { var rv_frame = document.getElementById('Frame1'); rv_frame = (rv_frame.contentWindow) ? rv_frame.contentWindow : (rv_frame.contentDocument.document) ? rv_frame.contentDocument.document : rv_frame.contentDocument; rv_frame.document.open(); rv_frame.document.write(data); rv_frame.document.close(); }); }); </script>

  Read the article

• How to run Spring 3.0 PetClinic in tomcat with Hibernate backed JPA

  - by Zwei Steinen

  OK, this probably is supposed to be the easiest thing in the world, but I've been trying for the entire day, and it's still not working.. Any help is highly appreciated! What I did: Downloaded Tomcat 6.0.26 & Spring 3.0.1 Downloaded PetClinic from https://src.springframework.org/svn/spring-samples/petclinic Built & deployed petclinic.war. Ran fine with default TopLink persistence. Edited webapps/WEB-INF/spring/applicationContext-jpa.xml and changed jpaVendorAdaptor from TopLink to Hibernate. Edited webapps/WEB-INF/web.xml and changed context-param from applicationContext-jdbc.xml to applicationContext-jpa.xml Copied everything in the Spring 3.0.1 distribution to TOMCAT_HOME/lib. Launched tomcat. Saw Caused by: java.lang.IllegalStateException: ClassLoader [org.apache.catalina.loader.WebappClassLoader] does NOT provide an 'addTransformer(ClassFileTransformer)' method. Specify a custom LoadTimeWeaver or start your Java virtual machine with Spring's agent: -javaagent:spring-agent.jar Uncommented line <Loader loaderClass="org.springframework.instrument.classloading.tomcat.TomcatInstrumentableClassLoader"/> in webapps/META-INF/context.xml. Same error. Added that line to TOMCAT_HOME/context.xml Deployed without error. However, when I do something it will issue an error saying java.lang.NoClassDefFoundError: javax/transaction/SystemException at org.hibernate.ejb.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:39) at org.hibernate.ejb.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:34) at org.springframework.orm.jpa.JpaTransactionManager.createEntityManagerForTransaction(JpaTransactionManager.java:400) at org.springframework.orm.jpa.JpaTransactionManager.doBegin(JpaTransactionManager.java:321) at org.springframework.transaction.support.AbstractPlatformTransactionManager.getTransaction(AbstractPlatformTransactionManager.java:371) at org.springframework.transaction.interceptor.TransactionAspectSupport.createTransactionIfNecessary(TransactionAspectSupport.java:336) at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:102) at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172) at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:202) at $Proxy34.findOwners(Unknown Source) at org.springframework.samples.petclinic.web.FindOwnersForm.processSubmit(FindOwnersForm.java:56) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.springframework.web.bind.annotation.support.HandlerMethodInvoker.doInvokeMethod(HandlerMethodInvoker.java:710) at org.springframework.web.bind.annotation.support.HandlerMethodInvoker.invokeHandlerMethod(HandlerMethodInvoker.java:167) at org.springframework.web.servlet.mvc.annotation.AnnotationMethodHandlerAdapter.invokeHandlerMethod(AnnotationMethodHandlerAdapter.java:414) at org.springframework.web.servlet.mvc.annotation.AnnotationMethodHandlerAdapter.handle(AnnotationMethodHandlerAdapter.java:402) at org.springframework.web.servlet.DispatcherServlet.doDispatch(DispatcherServlet.java:771) at org.springframework.web.servlet.DispatcherServlet.doService(DispatcherServlet.java:716) at org.springframework.web.servlet.FrameworkServlet.processRequest(FrameworkServlet.java:647) at org.springframework.web.servlet.FrameworkServlet.doGet(FrameworkServlet.java:552) at javax.servlet.http.HttpServlet.service(HttpServlet.java:617) at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.springframework.web.filter.HiddenHttpMethodFilter.doFilterInternal(HiddenHttpMethodFilter.java:71) at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:76) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:852) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:588) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489) at java.lang.Thread.run(Thread.java:619) Caused by: java.lang.ClassNotFoundException: javax.transaction.SystemException at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1516) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1361) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320) ... 41 more I feel silly.. What am I missing?

  Read the article

• SlimDX: Lightning problem with Direct3D9

  - by Spi1988

  I am creating a simple application to get familiar with SlimDX library. I found some code written in MDX and I'm trying to convert it to run on SlimDX. I am having some problems with the light because everything is being shown as black. The code is: public partial class DirectTest : Form { private Device device= null; private float angle = 0.0f; Light light = new Light(); public DirectTest() { InitializeComponent(); this.Size = new Size(800, 600); this.SetStyle(ControlStyles.AllPaintingInWmPaint | ControlStyles.Opaque, true); } /// <summary> /// We will initialize our graphics device here /// </summary> public void InitializeGraphics() { PresentParameters pres_params = new PresentParameters() { Windowed = true, SwapEffect = SwapEffect.Discard }; device = new Device(new Direct3D(), 0, DeviceType.Hardware, this.Handle, CreateFlags.SoftwareVertexProcessing, pres_params); } private void SetupCamera() { device.SetRenderState(RenderState.CullMode, Cull.None); device.SetTransform(TransformState.World, Matrix.RotationAxis(new Vector3(angle / ((float)Math.PI * 2.0f), angle / ((float)Math.PI * 4.0f), angle / ((float)Math.PI * 6.0f)), angle / (float)Math.PI)); angle += 0.1f; device.SetTransform(TransformState.Projection, Matrix.PerspectiveFovLH((float)Math.PI / 4, this.Width / this.Height, 1.0f, 100.0f)); device.SetTransform(TransformState.View, Matrix.LookAtLH(new Vector3(0, 0, 5.0f), new Vector3(), new Vector3(0, 1, 0))); device.SetRenderState(RenderState.Lighting, false); } protected override void OnPaint(System.Windows.Forms.PaintEventArgs e) { device.Clear(ClearFlags.Target | ClearFlags.ZBuffer, Color.CornflowerBlue, 1.0f, 0); SetupCamera(); CustomVertex.PositionColored[] verts = new CustomVertex.PositionColored[3]; verts[0].Position = new Vector3(0.0f, 1.0f, 1.0f); verts[0].Normal = new Vector3(0.0f, 0.0f, -1.0f); verts[0].Color = System.Drawing.Color.White.ToArgb(); verts[1].Position = new Vector3(-1.0f, -1.0f, 1.0f); verts[1].Normal = new Vector3(0.0f, 0.0f, -1.0f); verts[1].Color = System.Drawing.Color.White.ToArgb(); verts[2].Position = new Vector3(1.0f, -1.0f, 1.0f); verts[2].Normal = new Vector3(0.0f, 0.0f, -1.0f); verts[2].Color = System.Drawing.Color.White.ToArgb(); light.Type = LightType.Point; light.Position = new Vector3(); light.Diffuse = System.Drawing.Color.White; light.Attenuation0 = 0.2f; light.Range = 10000.0f; device.SetLight(0, light); device.EnableLight(0, true); device.BeginScene(); device.VertexFormat = CustomVertex.PositionColored.format; device.DrawUserPrimitives<CustomVertex.PositionColored>(PrimitiveType.TriangleList, 1, verts); device.EndScene(); device.Present(); this.Invalidate(); } } } The Vertex Format that I am using is the following [StructLayout(LayoutKind.Sequential)] public struct PositionNormalColored { public Vector3 Position; public int Color; public Vector3 Normal; public static readonly VertexFormat format = VertexFormat.Diffuse | VertexFormat.Position | VertexFormat.Normal; } Any suggestions on what the problem might be? Thanks in Advance

  Read the article

• ASP.NET MVC 2 Mdel encapsulated within ViewModel Validation

  - by Program.X

  I am trying to get validation to work in ASP.NET MVC 2, but without much success. I have a complex class containing a large number of fields. (Don't ask - this is oneo f those real-world situations best practices can't touch) This would normally be my Model and is a LINQ-to-SQL generated class. Because this is generated code, I have created a MetaData class as per http://davidhayden.com/blog/dave/archive/2009/08/10/AspNetMvc20BuddyClassesMetadataType.aspx. public class ConsultantRegistrationMetadata { [DisplayName("Title")] [Required(ErrorMessage = "Title is required")] [StringLength(10, ErrorMessage = "Title cannot contain more than 10 characters")] string Title { get; set; } [Required(ErrorMessage = "Forename(s) is required")] [StringLength(128, ErrorMessage = "Forename(s) cannot contain more than 128 characters")] [DisplayName("Forename(s)")] string Forenames { get; set; } // ... I've attached this to the partial class of my generated class: [MetadataType(typeof(ConsultantRegistrationMetadata))] public partial class ConsultantRegistration { // ... Because my form is complex, it has a number of dependencies, such as SelectLists, etc. which I have encapsulated in a ViewModel pattern - and included the ConsultantRegistration model as a property: public class ConsultantRegistrationFormViewModel { public Data.ConsultantRegistration ConsultantRegistration { get; private set; } public SelectList Titles { get; private set; } public SelectList Countries { get; private set; } // ... So it is essentially ViewModel=Model My View then has: <p> <%: Html.LabelFor(model => model.ConsultantRegistration.Title) %> <%: Html.DropDownListFor(model => model.ConsultantRegistration.Title, Model.Titles,"(select a Title)") %> <%: Html.ValidationMessage("Title","*") %> </p> <p> <%: Html.LabelFor(model => model.ConsultantRegistration.Forenames) %> <%: Html.TextBoxFor(model => model.ConsultantRegistration.Forenames) %> <%: Html.ValidationMessageFor(model=>model.ConsultantRegistration.Forenames) %> </p> The problem is, the validation attributes on the metadata class are having no effect. I tried doing it via an Interface, but also no effect. I'm beginning to think that the reason is because I am encapsulating my model within a ViewModel. My Controller (Create Action) is as follows: [HttpPost] public ActionResult Create(Data.ConsultantRegistration consultantRegistration) { if (ModelState.IsValid) // this is always true - which is wrong!! { try { consultantRegistration = ConsultantRegistrationRepository.SaveConsultantRegistration(consultantRegistration); return RedirectToAction("Edit", new { id = consultantRegistration.ID, sectionIndex = 2 }); } catch (Exception ex) { ModelState.AddModelError("CreateException",ex); } } return View(new ConsultantRegistrationFormViewModel(consultantRegistration)); } As outlined in the comment, the ModelState.IsValid property always returns true, despite fields with the Validaiton annotations not being valid. (Forenames being a key example). Am I missing something obvious - considering I am an MVC newbie? I'm after the mechanism demoed by Jon Galloway at http://www.asp.net/learn/mvc-videos/video-10082.aspx. (Am aware t is similar to http://stackoverflow.com/questions/1260562/asp-net-mvc-model-viewmodel-validation but that post seems to talk about xVal. I have no idea what that is and suspect it is for MVC 1)

  Read the article

• WCF Test Client Service Failed to Invoke

  - by renjucool

  I'm connection IBM.Iseries database in a c# application using ADO.NET iSeries drivers. My WCF service is throwing the error as "HTTP could not register URL http://+:80/Temporary_Listen_Addresses/771be107-8fa3-46f9-ac01-12c4d503d01e/ because TCP port 80 is being used by another application." <system.serviceModel> <client> <endpoint address="http://localhost:8080/Design_Time_Addresses/DataAccessLayer/POEngine/" binding="wsDualHttpBinding" bindingConfiguration="" contract="POServiceReference.IPOEngine" name="MyPoBindings"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="http://localhost:8080/Design_Time_Addresses/DataAccessLayer/POEngine/" binding="wsDualHttpBinding" bindingConfiguration="PoBindings1" contract="POServiceReference.IPOEngine" name="PoBindings"> <identity> <dns value="localhost" /> </identity> </endpoint> </client> <bindings> <wsDualHttpBinding> <binding name="PoBindings1" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" /> <security mode="Message"> <message clientCredentialType="Windows" negotiateServiceCredential="true" algorithmSuite="Default" /> </security> </binding> </wsDualHttpBinding> <wsHttpBinding> <binding name="PoBindings" /> </wsHttpBinding> </bindings> <services> <service behaviorConfiguration="DataAccessLayer.POEngineBehavior" name="DataAccessLayer.POEngine"> <endpoint address="" binding="wsDualHttpBinding" bindingConfiguration="" name="PoBindings" contract="DataAccessLayer.IPOEngine"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" /> <host> <baseAddresses> <add baseAddress="http://localhost:8080/Design_Time_Addresses/DataAccessLayer/POEngine/" /> </baseAddresses> </host> </service> </services> <behaviors> <endpointBehaviors> <behavior name="NewBehavior" /> </endpointBehaviors> <serviceBehaviors> <behavior name="DataAccessLayer.Service1Behavior"> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="false" /> </behavior> <behavior name="DataAccessLayer.POEngineBehavior"> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="false" /> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> Having the problem also without using any IBM data access. A normal Hello World is also throwing the error.Where i need to change the port address

  Read the article

• email-spec destroys my rake cucumber:all

  - by Leonardo Dario Perna

  This works fine: $ rake cucumber:all Then $ script/plugin install git://github.com/bmabey/email-spec.git remote: Counting objects: 162, done. remote: Compressing objects: 100% (130/130), done. remote: Total 162 (delta 18), reused 79 (delta 13) Receiving objects: 100% (162/162), 127.65 KiB | 15 KiB/s, done. Resolving deltas: 100% (18/18), done. From git://github.com/bmabey/email-spec * branch HEAD - FETCH_HEAD And $ script/generate email_spec exists features/step_definitions create features/step_definitions/email_steps.rb And I add 'require 'email_spec/cucumber' in /feature/support/env.rb so it looks somethinng like: require File.expand_path(File.dirname(__FILE__) + '/../../config/environment') require 'cucumber/rails/world' require 'cucumber/formatter/unicode' # Comment out this line if you don't want Cucumber Unicode support require 'email_spec/cucumber' and now: rake cucumber:all gives me this error: $ rake cucumber:all --trace (in /Users/leonardodarioperna/Projects/frestyl/frestyl) ** Invoke cucumber:all (first_time) ** Invoke cucumber:ok (first_time) ** Invoke db:test:prepare (first_time) ** Invoke db:abort_if_pending_migrations (first_time) ** Invoke environment (first_time) ** Execute environment ** Execute db:abort_if_pending_migrations ** Execute db:test:prepare ** Invoke db:test:load (first_time) ** Invoke db:test:purge (first_time) ** Invoke environment ** Execute db:test:purge ** Execute db:test:load ** Invoke db:schema:load (first_time) ** Invoke environment ** Execute db:schema:load ** Execute cucumber:ok /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/bin/ruby -I "/Library/Ruby/Gems/1.8/gems/cucumber-0.4.4/lib:lib" "/Library/Ruby/Gems/1.8/gems/cucumber-0.4.4/bin/cucumber" --profile default cucumber.yml was not found. Please refer to cucumber's documentation on defining profiles in cucumber.yml. You must define a 'default' profile to use the cucumber command without any arguments. Type 'cucumber --help' for usage. rake aborted! Command failed with status (1): [/System/Library/Frameworks/Ruby.framework/...] /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:995:in `sh' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:1010:in `call' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:1010:in `sh' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:1094:in `sh' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:1029:in `ruby' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:1094:in `ruby' /Library/Ruby/Gems/1.8/gems/cucumber-0.4.4/lib/cucumber/rake/task.rb:68:in `run' /Library/Ruby/Gems/1.8/gems/cucumber-0.4.4/lib/cucumber/rake/task.rb:138:in `define_task' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:636:in `call' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:636:in `execute' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:631:in `each' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:631:in `execute' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:597:in `invoke_with_call_chain' /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/monitor.rb:242:in `synchronize' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:590:in `invoke_with_call_chain' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:607:in `invoke_prerequisites' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:604:in `each' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:604:in `invoke_prerequisites' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:596:in `invoke_with_call_chain' /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/monitor.rb:242:in `synchronize' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:590:in `invoke_with_call_chain' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:583:in `invoke' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2051:in `invoke_task' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2029:in `top_level' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2029:in `each' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2029:in `top_level' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2068:in `standard_exception_handling' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2023:in `top_level' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2001:in `run' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2068:in `standard_exception_handling' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:1998:in `run' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/bin/rake:31 /usr/bin/rake:19:in `load' /usr/bin/rake:19 WHY? but the command: $ cucumber still works Any idea?

  Read the article

• Is there a C pre-processor which eliminates #ifdef blocks based on values defined/undefined?

  - by Jonathan Leffler

  Original Question What I'd like is not a standard C pre-processor, but a variation on it which would accept from somewhere - probably the command line via -DNAME1 and -UNAME2 options - a specification of which macros are defined, and would then eliminate dead code. It may be easier to understand what I'm after with some examples: #ifdef NAME1 #define ALBUQUERQUE "ambidextrous" #else #define PHANTASMAGORIA "ghostly" #endif If the command were run with '-DNAME1', the output would be: #define ALBUQUERQUE "ambidextrous" If the command were run with '-UNAME1', the output would be: #define PHANTASMAGORIA "ghostly" If the command were run with neither option, the output would be the same as the input. This is a simple case - I'd be hoping that the code could handle more complex cases too. To illustrate with a real-world but still simple example: #ifdef USE_VOID #ifdef PLATFORM1 #define VOID void #else #undef VOID typedef void VOID; #endif /* PLATFORM1 */ typedef void * VOIDPTR; #else typedef mint VOID; typedef char * VOIDPTR; #endif /* USE_VOID */ I'd like to run the command with -DUSE_VOID -UPLATFORM1 and get the output: #undef VOID typedef void VOID; typedef void * VOIDPTR; Another example: #ifndef DOUBLEPAD #if (defined NT) || (defined OLDUNIX) #define DOUBLEPAD 8 #else #define DOUBLEPAD 0 #endif /* NT */ #endif /* !DOUBLEPAD */ Ideally, I'd like to run with -UOLDUNIX and get the output: #ifndef DOUBLEPAD #if (defined NT) #define DOUBLEPAD 8 #else #define DOUBLEPAD 0 #endif /* NT */ #endif /* !DOUBLEPAD */ This may be pushing my luck! Motivation: large, ancient code base with lots of conditional code. Many of the conditions no longer apply - the OLDUNIX platform, for example, is no longer made and no longer supported, so there is no need to have references to it in the code. Other conditions are always true. For example, features are added with conditional compilation so that a single version of the code can be used for both older versions of the software where the feature is not available and newer versions where it is available (more or less). Eventually, the old versions without the feature are no longer supported - everything uses the feature - so the condition on whether the feature is present or not should be removed, and the 'when feature is absent' code should be removed too. I'd like to have a tool to do the job automatically because it will be faster and more reliable than doing it manually (which is rather critical when the code base includes 21,500 source files). (A really clever version of the tool might read #include'd files to determine whether the control macros - those specified by -D or -U on the command line - are defined in those files. I'm not sure whether that's truly helpful except as a backup diagnostic. Whatever else it does, though, the pseudo-pre-processor must not expand macros or include files verbatim. The output must be source similar to, but usually simpler than, the input code.) Status Report (one year later) After a year of use, I am very happy with 'sunifdef' recommended by the selected answer. It hasn't made a mistake yet, and I don't expect it to. The only quibble I have with it is stylistic. Given an input such as: #if (defined(A) && defined(B)) || defined(C) || (defined(D) && defined(E)) and run with '-UC' (C is never defined), the output is: #if defined(A) && defined(B) || defined(D) && defined(E) This is technically correct because '&&' binds tighter than '||', but it is an open invitation to confusion. I would much prefer it to include parentheses around the sets of '&&' conditions, as in the original: #if (defined(A) && defined(B)) || (defined(D) && defined(E)) However, given the obscurity of some of the code I have to work with, for that to be the biggest nit-pick is a strong compliment; it is valuable tool to me. The New Kid on the Block Having checked the URL for inclusion in the information above, I see that (as predicted) there is an new program called Coan that is the successor to 'sunifdef'. It is available on SourceForge and has been since January 2010. I'll be checking it out...further reports later this year, or maybe next year, or sometime, or never.

  Read the article

• Reuse security code between WCF and MVC.NET

  - by mrjoltcola

  First the background: I jumped into MVC.NET from the Java MVC world, so my implementation below is possibly cheating, I don't know. I avoided fooling with a custom membership provider and I just implemented the base code needed to authenticate and load roles in my LogOn action. Typically I just need to check roles programatically, and have no use for all of the other membership features, so I didn't originally think I needed a full Membership provider. I have a successful WCF project with a custom authentication and authorization layer that I did at least write per the proper API. I implemented it with custom IPrincipal, UserNamePasswordValidator and IAuthorizationPolicy classes to load from an Oracle database. In my WCF services, I use declarative security: [PrincipalPermission(SecurityAction.Demand, Role="ADMIN")]. The question (on the ASP.NET/MCV.NET side): All my reading indicates I should implement a custom Membership/Roles provider, and use [Authorize(Roles="ADMIN")] on my controller actions. At this point, I don't have a true Membership provider, but I'm using the same User class that implements the IPrincipal interface that works with the WCF security. I plan to share common code between the WCF and ASP.NET modules. So my LogOn action is not using the FormsService (and I assume this is bad). I had commented it out, and just used my "UserService" to access the Oracle db. Note my "TODO" comment below. public ActionResult LogOn(LogOnModel model, string returnUrl) { log.Info("Login attempt by " + model.UserName); if (ModelState.IsValid) { User user = userService.findByUserName(model.UserName); // Commented original MemberShipService code, this is probably bad // if (MembershipService.ValidateUser(model.UserName, model.Password)) if (user != null && user.Authenticate(model.Password) == true) { log.Info("Login success by " + model.UserName); FormsService.SignIn(model.UserName, model.RememberMe); // TODO: Override with Custom identity / roles? user.AddRoles(userService.listRolesByUser(user)); // pull in roles from db if (!String.IsNullOrEmpty(returnUrl)) return Redirect(returnUrl); else return RedirectToAction("Index", "Home"); } else { log.Info("Login failure by " + model.UserName); ModelState.AddModelError("", "The user name or password provided is incorrect."); } } // If we got this far, something failed, redisplay form return View(model); } So can I make the above work? Can I stick the IPrincipal (User) into the CurrentContext or HttpContext? Can I integrate the custom IPrincipal I've already created without writing a full Membership/Roles Provider? I currently stick the User object into the session and access it from all MVC.NET controllers with "CurrentUser" property which grabs it from the session on demand. But this doesn't work with the [Authorize] attribute; I assume that is because it knows nothing about my custom Principal in the session, and is instead using whatever FormsService.SignIn() produces. I also found that session timeouts screw up the login redirect, the user doesn't get forwarded, instead we get a null exception accessing User from the session, and I assume it is related to my "skipping steps" to get a quick implementation. Thanks.

  Read the article

• mysql-connector-c++ - ‘get_driver_instance’ is not a member of ‘sql::mysql’

  - by rizzo0917

  I am a beginner at c++ and figured the only way I am going to learn is to get dirty with some code. I am trying to build a program that connects to a mysql database. I am using g++, on linux. With no ide. I run "make" and this is my error: hello.cpp:38: error: ‘get_driver_instance’ is not a member of ‘sql::mysql’ make: *** [hello.o] Error 1 Here is my code including makefile. Any Help would be great! Thanks in advance ###BEGIN hello.cpp### #include <stdlib.h> #include <iostream> #include <sstream> #include <stdexcept> #include "mysql_connection.h" #include <cppconn/driver.h> #include <cppconn/exception.h> #include <cppconn/resultset.h> #include <cppconn/statement.h> #include <cppconn/prepared_statement.h> #define EXAMPLE_HOST "localhost" #define EXAMPLE_USER "root" #define EXAMPLE_PASS "" #define EXAMPLE_DB "world" using namespace std; using namespace sql::mysql; int main(int argc, const char **argv) { string url(argc >= 2 ? argv[1] : EXAMPLE_HOST); const string user(argc >= 3 ? argv[2] : EXAMPLE_USER); const string pass(argc >= 4 ? argv[3] : EXAMPLE_PASS); const string database(argc >= 5 ? argv[4] : EXAMPLE_DB); cout << "Connector/C++ tutorial framework..." << endl; cout << endl; try { sql::Driver *driver; sql::Connection *con; sql::Statement *stmt; driver = sql::mysql::get_driver_instance(); con = driver->connect("tcp://127.0.0.1:3306", "user", "password"); stmt = con->createStatement(); stmt->execute("USE " EXAMPLE_DB); stmt->execute("DROP TABLE IF EXISTS test"); stmt->execute("CREATE TABLE test(id INT, label CHAR(1))"); stmt->execute("INSERT INTO test(id, label) VALUES (1, 'a')"); delete stmt; delete con; } catch (sql::SQLException &e) { /* The MySQL Connector/C++ throws three different exceptions: - sql::MethodNotImplementedException (derived from sql::SQLException) - sql::InvalidArgumentException (derived from sql::SQLException) - sql::SQLException (derived from std::runtime_error) */ cout << "# ERR: SQLException in " << __FILE__; cout << "(" << __FUNCTION__ << ") on line " << __LINE__ << endl; /* Use what() (derived from std::runtime_error) to fetch the error message */ cout << "# ERR: " << e.what(); cout << " (MySQL error code: " << e.getErrorCode(); cout << ", SQLState: " << e.getSQLState() << " )" << endl; return EXIT_FAILURE; } cout << "Done." << endl; return EXIT_SUCCESS; } ###END hello.cpp### ###BEGIN Make File### SRCS := hello.cpp OBJS := $(SRCS:.cpp=.o) CXXFLAGS := -Wall -pedantic INCPATHS := -I/home/user/mysql-connector/include/ LIBPATHS := -L/home/user/mysql-connector/lib/ -L/home/user/mysql-connector-c/lib/ LIBS := -static -lmysqlclient -mysqlcppconn-static EXE := MyExecutable $(EXE): $(OBJS) $(CXX) $(OBJS) $(LIBPATHS) $(LIBS) -o $@ .cpp.o: $(CXX) $(CXXFLAGS) $(INCPATHS) -c $< -o $@ ###End Makefile###

  Read the article

• Having trouble getting cucumber 6.3 to run on rails 2.3.4

  - by Yak

  Hi, I am trying to to get cucumber to run with no luck. Here is the error I am seeing: cucumber features Using the default profile... no such file to load -- test/ (MissingSourceFile) /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in gem_original_require' /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in polyglot_original_require' /Library/Ruby/Gems/1.8/gems/polyglot-0.3.0/lib/polyglot.rb:65:in require' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.4/lib/active_support/dependencies.rb:158:in require' /Users/yakovrabinovich/Starstreet/starstreet/vendor/gems/cucumber-0.6.3/bin/../lib/cucumber/rails/world.rb:11 /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in gem_original_require' /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in polyglot_original_require' /Library/Ruby/Gems/1.8/gems/polyglot-0.3.0/lib/polyglot.rb:65:in require' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.4/lib/active_support/dependencies.rb:158:in require' /Library/Ruby/Gems/1.8/gems/cucumber-rails-0.3.0/lib/cucumber/rails/rspec.rb:1 /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in gem_original_require' /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in polyglot_original_require' /Library/Ruby/Gems/1.8/gems/polyglot-0.3.0/lib/polyglot.rb:65:in require' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.4/lib/active_support/dependencies.rb:158:in require' /Users/yakovrabinovich/Starstreet/starstreet/features/support/env.rb:11 /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in gem_original_require' /Library/Ruby/Site/1.8/rubygems/custom_require.rb:31:in polyglot_original_require' /Library/Ruby/Gems/1.8/gems/polyglot-0.3.0/lib/polyglot.rb:65:in require' /Library/Ruby/Gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/rb_support/rb_language.rb:124:in load_code_file' /Library/Ruby/Gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/step_mother.rb:85:in load_code_file' /Library/Ruby/Gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/step_mother.rb:77:in load_code_files' /Library/Ruby/Gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/step_mother.rb:76:in each' /Library/Ruby/Gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/step_mother.rb:76:in load_code_files' /Library/Ruby/Gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/cli/main.rb:48:in execute!' /Library/Ruby/Gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/cli/main.rb:20:in execute' /Library/Ruby/Gems/1.8/gems/cucumber-0.6.3/bin/cucumber:8 /usr/bin/cucumber:19:in `load' /usr/bin/cucumber:19 Here are my gems: Yakov-Rabinovichs-MacBook:1.8 yakovrabinovich$ gem list * LOCAL GEMS * aasm (2.1.3) acl9 (0.11.0) actionmailer (2.3.4, 2.2.2, 1.3.6) actionpack (2.3.4, 2.2.2, 1.13.6) actionwebservice (1.2.6) activerecord (2.3.4, 2.2.2, 1.15.6) activeresource (2.3.4, 2.2.2) activesupport (2.3.4, 2.2.2, 1.4.4) acts_as_ferret (0.4.3) authlogic (2.1.3) bgetting-hominid (1.2.0) builder (2.1.2) capistrano (2.5.2) capistrano-ext (1.2.1) cgi_multipart_eof_fix (2.5.0) chronic (0.2.3) columnize (0.3.1) configatron (2.5.1) cucumber (0.6.3) cucumber-rails (0.3.0) daemons (1.0.10) database_cleaner (0.5.0) diff-lcs (1.1.2) dnssd (0.6.0) factory_girl (1.2.3) fastthread (1.0.1) fcgi (0.8.7) ferret (0.11.6) gem_plugin (0.2.3) gemcutter (0.4.1) highline (1.5.0) hoe (2.5.0) hominid (2.1.0) hpricot (0.6.164) json (1.2.0) json_pure (1.2.0) libxml-ruby (1.1.2) linecache (0.43) mocha (0.9.8) mongrel (1.1.5) needle (1.3.0) net-scp (1.0.1) net-sftp (2.0.1, 1.1.1) net-ssh (2.0.16, 2.0.4, 1.1.4) net-ssh-gateway (1.0.0) nokogiri (1.4.1) oauth (0.3.6) pg (0.8.0) polyglot (0.3.0) rack (1.0.1) rack-test (0.5.3) rails (2.3.4, 2.2.2, 1.2.6) rake (0.8.7, 0.8.3) RedCloth (4.1.1) rspec (1.3.0) rspec-rails (1.3.2) ruby-debug (0.10.3) ruby-debug-base (0.10.3) ruby-hmac (0.4.0) ruby-openid (2.1.2) ruby-yadis (0.3.4) rubyforge (2.0.3) rubygems-update (1.3.5) rubynode (0.1.5) sqlite3-ruby (1.2.4) term-ansicolor (1.0.4) termios (0.9.4) test-unit (1.2.3) thoughtbot-factory_girl (1.2.2) thoughtbot-shoulda (2.10.2) treetop (1.4.4) whenever (0.4.1) will_paginate (2.3.11) xmpp4r (0.4) yamler (0.1.0) Any help would be greatly appreciated!

  Read the article

• Visual Basic Cryptography Question

  - by Glenn Sullivan

  I am trying to mimic the results of some C code that uses the OpenSSL library using the system.security.crytography library in the .net 3.5 world, and I can't seem to get it right. I need some help... part of the issue is my understanding of crytography in general. Here's what is supposed to happen: I send a request for authentication to a device. It returns a challenge digest, which I then need to sign with a known key and return The device returns a "success" or "Fail" message. I have the following code snippet that I am trying to "copy": //Seed the PRNG //Cheating here - the PRNG will be seeded when we create a key pair //The key pair is discarded only doing this to seed the PRNG. DSA *temp_dsa = DSA_new(); if(!temp_dsa) { printf("Error: The client had an error with the DSA API\n"); exit(0); } unsigned char seed[20] = "Our Super Secret Key"; temp_dsa = DSA_generate_parameters(128, seed, sizeof(seed), NULL, NULL, NULL, NULL); DSA_free(temp_dsa); //A pointer to the private key. p = (unsigned char *)&priv_key; //Create and allocate a DSA structure from the private key. DSA *priv_dsa = NULL; priv_dsa = d2i_DSAPrivateKey(NULL, &p, sizeof(priv_key)); if(!priv_dsa) { printf("Error: The client had an error with the DSA API\n"); exit(0); } //Allocate memory for the to be computed signature. sigret = OPENSSL_malloc(DSA_size(priv_dsa)); //Sign the challenge digest recieved from the ISC. retval = DSA_sign(0, pResp->data, pResp->data_length, sigret, &siglen, priv_dsa); A few more bits of information: priv_key is a 252 element character array of hex characters that is included. The end result is a 512 (or less) array of characters to send back for validation to the device. Rasmus asked to see the key array. Here it is: unsigned char priv_key[] = {0x30, 0x81, 0xf9, 0x02, 0x01, 0x00, 0x02, 0x41, 0x00, 0xfe, 0xca, 0x97, 0x55, 0x1f, 0xc0, 0xb7, 0x1f, 0xad, 0xf0, 0x93, 0xec, 0x4b, 0x31, 0x94, 0x78, 0x86, 0x82, 0x1b, 0xab, 0xc4, 0x9e, 0x5c, 0x40, 0xd9, 0x89, 0x7d, 0xde, 0x43, 0x38, 0x06, 0x4f, 0x1b, 0x2b, 0xef, 0x5c, 0xb7, 0xff, 0x21, 0xb1, 0x11, 0xe6, 0x9a, 0x81, 0x9a, 0x2b, 0xef, 0x3a, 0xbb, 0x5c, 0xea, 0x76, 0xae, 0x3a, 0x8b, 0x92, 0xd2, 0x7c, 0xf1, 0x89, 0x8e, 0x4d, 0x3f, 0x0d, 0x02, 0x15, 0x00, 0x88, 0x16, 0x1b, 0xf5, 0xda, 0x43, 0xee, 0x4b, 0x58, 0xbb, 0x93, 0xea, 0x4e, 0x2b, 0xda, 0xb9, 0x17, 0xd1, 0xff, 0x21, 0x02, 0x41, 0x00, 0xf6, 0xbb, 0x45, 0xea, 0xda, 0x72, 0x39, 0x4f, 0xc1, 0xdd, 0x02, 0xb4, 0xf3, 0xaa, 0xe5, 0xe2, 0x76, 0xc7, 0xdc, 0x34, 0xb2, 0x0a, 0xd8, 0x69, 0x63, 0xc3, 0x40, 0x2c, 0x58, 0xea, 0xa6, 0xbd, 0x24, 0x8b, 0x6b, 0xaa, 0x4b, 0x41, 0xfc, 0x5f, 0x21, 0x02, 0x3c, 0x27, 0xa9, 0xc7, 0x7a, 0xc8, 0x59, 0xcd, 0x5b, 0xdd, 0x6c, 0x44, 0x48, 0x86, 0xd1, 0x34, 0x46, 0xb0, 0x89, 0x55, 0x50, 0x87, 0x02, 0x41, 0x00, 0x80, 0x29, 0xc6, 0x4a, 0x08, 0x3e, 0x30, 0x54, 0x71, 0x9b, 0x95, 0x49, 0x55, 0x17, 0x70, 0xc7, 0x96, 0x65, 0xc8, 0xc2, 0xe2, 0x8a, 0xe0, 0x5d, 0x9f, 0xe4, 0xb2, 0x1f, 0x20, 0x83, 0x70, 0xbc, 0x88, 0x36, 0x03, 0x29, 0x59, 0xcd, 0xc7, 0xcd, 0xd9, 0x4a, 0xa8, 0x65, 0x24, 0x6a, 0x77, 0x8a, 0x10, 0x88, 0x0d, 0x2f, 0x15, 0x4b, 0xbe, 0xba, 0x13, 0x23, 0xa1, 0x73, 0xa3, 0x04, 0x37, 0xc9, 0x02, 0x14, 0x06, 0x8e, 0xc1, 0x41, 0x40, 0xf1, 0xf6, 0xe1, 0xfa, 0xfb, 0x64, 0x28, 0x02, 0x15, 0xce, 0x47, 0xaa, 0xce, 0x6e, 0xfe}; Can anyone help me translate this code to it's VB.net crypto equivalent? TIA, Glenn

  Read the article

• Best practices for using the Entity Framework with WPF DataBinding

  - by Ken Smith

  I'm in the process of building my first real WPF application (i.e., the first intended to be used by someone besides me), and I'm still wrapping my head around the best way to do things in WPF. It's a fairly simple data access application using the still-fairly-new Entity Framework, but I haven't been able to find a lot of guidance online for the best way to use these two technologies (WPF and EF) together. So I thought I'd toss out how I'm approaching it, and see if anyone has any better suggestions. I'm using the Entity Framework with SQL Server 2008. The EF strikes me as both much more complicated than it needs to be, and not yet mature, but Linq-to-SQL is apparently dead, so I might as well use the technology that MS seems to be focusing on. This is a simple application, so I haven't (yet) seen fit to build a separate data layer around it. When I want to get at data, I use fairly simple Linq-to-Entity queries, usually straight from my code-behind, e.g.: var families = from family in entities.Family.Include("Person") orderby family.PrimaryLastName, family.Tag select family; Linq-to-Entity queries return an IOrderedQueryable result, which doesn't automatically reflect changes in the underlying data, e.g., if I add a new record via code to the entity data model, the existence of this new record is not automatically reflected in the various controls referencing the Linq query. Consequently, I'm throwing the results of these queries into an ObservableCollection, to capture underlying data changes: familyOC = new ObservableCollection<Family>(families.ToList()); I then map the ObservableCollection to a CollectionViewSource, so that I can get filtering, sorting, etc., without having to return to the database. familyCVS.Source = familyOC; familyCVS.View.Filter = new Predicate<object>(ApplyFamilyFilter); familyCVS.View.SortDescriptions.Add(new System.ComponentModel.SortDescription("PrimaryLastName", System.ComponentModel.ListSortDirection.Ascending)); familyCVS.View.SortDescriptions.Add(new System.ComponentModel.SortDescription("Tag", System.ComponentModel.ListSortDirection.Ascending)); I then bind the various controls and what-not to that CollectionViewSource: <ListBox DockPanel.Dock="Bottom" Margin="5,5,5,5" Name="familyList" ItemsSource="{Binding Source={StaticResource familyCVS}, Path=., Mode=TwoWay}" IsSynchronizedWithCurrentItem="True" ItemTemplate="{StaticResource familyTemplate}" SelectionChanged="familyList_SelectionChanged" /> When I need to add or delete records/objects, I manually do so from both the entity data model, and the ObservableCollection: private void DeletePerson(Person person) { entities.DeleteObject(person); entities.SaveChanges(); personOC.Remove(person); } I'm generally using StackPanel and DockPanel controls to position elements. Sometimes I'll use a Grid, but it seems hard to maintain: if you want to add a new row to the top of your grid, you have to touch every control directly hosted by the grid to tell it to use a new line. Uggh. (Microsoft has never really seemed to get the DRY concept.) I almost never use the VS WPF designer to add, modify or position controls. The WPF designer that comes with VS is sort of vaguely helpful to see what your form is going to look like, but even then, well, not really, especially if you're using data templates that aren't binding to data that's available at design time. If I need to edit my XAML, I take it like a man and do it manually. Most of my real code is in C# rather than XAML. As I've mentioned elsewhere, entirely aside from the fact that I'm not yet used to "thinking" in it, XAML strikes me as a clunky, ugly language, that also happens to come with poor designer and intellisense support, and that can't be debugged. Uggh. Consequently, whenever I can see clearly how to do something in C# code-behind that I can't easily see how to do in XAML, I do it in C#, with no apologies. There's been plenty written about how it's a good practice to almost never use code-behind in WPF page (say, for event-handling), but so far at least, that makes no sense to me whatsoever. Why should I do something in an ugly, clunky language with god-awful syntax, an astonishingly bad editor, and virtually no type safety, when I can use a nice, clean language like C# that has a world-class editor, near-perfect intellisense, and unparalleled type safety? So that's where I'm at. Any suggestions? Am I missing any big parts of this? Anything that I should really think about doing differently?

  Read the article

• postMessage to PDF in an iFrame

  - by Linus

  Here's my situation. I had a webpage with an embedded PDF form. We used a basic object tag (embed in FF) to load the PDF file like this: <object id="pdfForm" height="100%" width="100%" type="application/pdf" data="..url"></object> On this webpage was an Html Save button that would trigger some Javascript which used the postMessage API of the embedded object to execute javascript embedded in the PDF. Basically, that code looked like this: function save() { sendMessage(["submitForm"]); } function sendMessage(aMessage) { pdfObject = document.getElementById("pdfForm"); if (typeof(pdfObject) == "undefined") return; if (typeof (pdfObject.postMessage) == "undefined") return; pdfObject.postMessage(aMessage); } This all was working beautifully. Except we ran into an issue with Firefox so that we need to embed the PDF using iFrame, instead of the object tag. So now, the PDF is embeded using this code: <iframe id="pdfWrapper" src="..someUrl" width="100%" height="800px" frameborder="0"></iframe> Unfortunately, with this code, the javascript for posting a message no longer works, and I can't really figure out how to get access to the pdf object anymore so that I can access the postMessage api. Using fiddler or the chome javascript debugger, it is clear that within the iframe, the browser is automatically generating an embed tag (not an object tag), but that does not let me access the postMessage API. This is the code I'm trying which doesn't work: function sendMessage(aMessage) { var frame = document.getElementById("pdfWrapper"); var doc = null; if (frame.contentDocument) doc = frame.contentDocument; else if (frame.contentWindow) doc = frame.contentWindow.document; else if (frame.document) doc = frame.document; if (doc==null || typeof(doc) == "undefined") return; var pdfObject = doc.embeds[0]; if (pdfObject==null || typeof (pdfObject.postMessage) == "undefined") return; pdfObject.postMessage(aMessage); } Any help on this? Sorry for the long question. EDIT: I've been asked to provide samples in code so that people can test whether the messaging works. Essentially, all you need is any PDF with this javascript embedded. function myOnMessage(aMessage) { app.alert("Hello World!"); } function myOnDisclose(cURL, cDocumentURL) { return true; } function myOnError(error, aMessage) { app.alert(error); } var msgHandlerObject = new Object(); msgHandlerObject.onMessage = myOnMessage; msgHandlerObject.onError = myOnError; msgHandlerObject.onDisclose = myOnDisclose; msgHandlerObject.myDoc = this; this.hostContainer.messageHandler = msgHandlerObject; I realize you need Acrobat pro to create PDFs with javascript, so to make this easier, I posted sample code--both working and non working scenarios--at this url: http://www.filedropper.com/pdfmessage You can download the zip and extract it to /inetpub/wwwroot if you use Windows, and then point your browser to either the works.htm or fails.htm. Thanks for any help you can give.

  Read the article

• JMS messaging implementation

  - by Gandalf StormCrow

  I've been struggling with this "simple" task for more expirienced people, I'm stuck for 2 days now need help. I've changed things arround like zillion times now, finally I stumbled upon this spring JMS tutorial. What I want to do, Send a message and receive it. I've been also reading this book chapter 8 on messaging. It really nicely explains 2 type of messaging and there is nice example for publish-and-subscribe type but now example for point-to-point messaging( this is the one I need). I'm able to send message to the queue on my own, but don't have a clue how to receive thats why I tried with this spring tutorial here is what I've got so far : SENDER : package quartz.spring.com.example; import java.util.HashMap; import java.util.Map; import javax.jms.ConnectionFactory; import javax.jms.JMSException; import javax.jms.Message; import javax.jms.Queue; import javax.jms.Session; import org.springframework.jms.core.MessageCreator; import org.springframework.jms.core.JmsTemplate; import org.springframework.jms.core.JmsTemplate102; import org.springframework.jms.core.MessagePostProcessor; public class JmsQueueSender { private JmsTemplate jmsTemplate; private Queue queue; public void setConnectionFactory(ConnectionFactory cf) { this.jmsTemplate = new JmsTemplate102(cf, false); } public void setQueue(Queue queue) { this.queue = queue; } public void simpleSend() { this.jmsTemplate.send(this.queue, new MessageCreator() { public Message createMessage(Session session) throws JMSException { return session.createTextMessage("hello queue world"); } }); } public void sendWithConversion() { Map map = new HashMap(); map.put("Name", "Mark"); map.put("Age", new Integer(47)); jmsTemplate.convertAndSend("testQueue", map, new MessagePostProcessor() { public Message postProcessMessage(Message message) throws JMSException { message.setIntProperty("AccountID", 1234); message.setJMSCorrelationID("123-00001"); return message; } }); } } RECEIVER : package quartz.spring.com.example; import javax.jms.JMSException; import javax.jms.Message; import javax.jms.MessageListener; import javax.jms.TextMessage; public class ExampleListener implements MessageListener { public void onMessage(Message message) { if (message instanceof TextMessage) { try { System.out.println(((TextMessage) message).getText()); } catch (JMSException ex) { throw new RuntimeException(ex); } } else { throw new IllegalArgumentException("Message must be of type TextMessage"); } } } applicationcontext.xml <?xml version="1.0" encoding="UTF-8"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:jee="http://www.springframework.org/schema/jee" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.0.xsd http://www.springframework.org/schema/jee http://www.springframework.org/schema/jee/spring-jee-2.0.xsd"> <bean id="sender" class="quartz.spring.com.example.JmsQueueSender" init-method="sendWithConversion" /> <bean id="receiver" class="quartz.spring.com.example.ExampleListener" init-method="onMessage" /> </beans> Didn't really know that learning curve for this is so long, I mean the idea is very simple: Send message to the destination queue Receive message from the destination queue To receive messages, you do the following(so does book say): 1 Locate a ConnectionFactory, typically using JNDI. 2 Use the ConnectionFactory to create a Connection. 3 Use the Connection to create a Session. 4 Locate a Destination, typically using JNDI. 5 Use the Session to create a MessageConsumer for that Destination. Once you’ve done this, methods on the MessageConsumer enable you to either query the Destination for messages or to register for message notification. Can somebody please direct me towards right direction, is there a tutorial which explains in details how to receive message from the queue?I have the working send message code, didn't post it here because this post is too long as it is.

  Read the article

• Reading XML element & child nodes using LINQ in Vb.net- help me in where condition :(

  - by New Linq Baby

  Hi, I am new in LINQ world. I need an urgent help in reading the xml elements using LINQ with specific where condition. I need to find the max air_temp for a county i.e where county name = "Boone" and hour id = "06/03/2009 09:00CDT" i tried something like below, but no luck : Dim custs As IEnumerable = From c In Element.Load("C:\meridian.xml").Elements("county") _ Select c.Elements("hour").Elements("air_temp").Max() For Each x In custs Response.Write(custs(0).ToString()) Next ------------------- here is the xml file : <forecasts> <issued>06/02/2009 12:00CDT</issued> - <county name="Adair"> - <hour id="06/02/2009 12:00CDT"> <air_temp>61</air_temp> <cloud_cover>overcast</cloud_cover> <dew_point>59</dew_point> <precip_prob>90</precip_prob> <precip_rate>0.12</precip_rate> <precip_type>rain</precip_type> <snow_rate>0.0</snow_rate> <wind_direction>NE</wind_direction> <wind_speed>12</wind_speed> <dew_point_confidence>-3/+3</dew_point_confidence> <road_temp>64</road_temp> <road_frost_prob>0</road_frost_prob> <road_potential_evap_rate>429</road_potential_evap_rate> <road_temp_confidence>-3/+2</road_temp_confidence> <dew_point_confidence>-3/+3</dew_point_confidence> <bridge_temp>63</bridge_temp> <bridge_temp_confidence>-4/+2</bridge_temp_confidence> <bridge_frost>NO</bridge_frost> </hour> - <hour id="06/02/2009 13:00CDT"> <air_temp>61</air_temp> <cloud_cover>overcast</cloud_cover> <dew_point>60</dew_point> <precip_prob>70</precip_prob> <precip_rate>0.01</precip_rate> <precip_type>rain</precip_type> <snow_rate>0.0</snow_rate> <wind_direction>ENE</wind_direction> <wind_speed>10</wind_speed> <dew_point_confidence>-3/+3</dew_point_confidence> <road_temp>65</road_temp> <road_frost_prob>0</road_frost_prob> <road_potential_evap_rate>411</road_potential_evap_rate> <road_temp_confidence>-3/+2</road_temp_confidence> <dew_point_confidence>-3/+3</dew_point_confidence> <bridge_temp>64</bridge_temp> <bridge_temp_confidence>-4/+1</bridge_temp_confidence> <bridge_frost>NO</bridge_frost> </hour>

  Read the article

< Previous Page | 342 343 344 345 346 347 348 349 350 351 352 353  | Next Page >