Search Results

Search found 15209 results on 609 pages for 'configuration'.

Page 348/609 | < Previous Page | 344 345 346 347 348 349 350 351 352 353 354 355  | Next Page >

  • Tips and tricks to make NX server more stable

    - by gareth_bowles
    My shop has been using the FreeNX server on Fedora 11 for a while now and mostly getting good results, especially with performance, but we have some annoying problems with client connections. There are two main issues: Client sessions sometimes freeze after a long time (seems to be at least 2 hours of having the session active) We often have to make multiple attempts to start a new client session, especially if a previous session was suspended rather than terminated. In qwuite a few cases, we've had to restart the NX server to get around this. Our NX server configuration is the default except that we've enabled logging level 7 to /var/log/nxserver.log, and set the font server to "unix:/7100" so that it uses xfs. Does anyone have any ideas for making things more stable ?

    Read the article

  • Enable Remote Desktop File Transfer

    - by Eric J.
    Most of the servers I RDP to support cut-and-paste file transfer (from my Win7 64 machine). One does not, and I can't figure out what configuration step is missing. I followed the steps outlined here: http://support.microsoft.com/kb/313292 but do not see the local file system on the remote server (or vice versa for that matter), and I cannot cut and paste files from the local to the remote system. If I try to cut and paste from the remote system to the local one, I get the error Cannot copy FILENAME: Windows cannot find '%1!ls!'. Check the spelling and try again, or try searching for the item by clicking the Start button and then clicking Search. The remote server is Windows Server 2003 Standard Edition.

    Read the article

  • What is the correct way to restart udev in Ubuntu?

    - by zerkms
    I've changed the name of my eth1 interface to eth0. How to ask udev now to re-read the config? service udev restart and udevadm control --reload-rules don't help. So is there any valid way except of rebooting? (yes, reboot helps with this issue) UPD: yes, I know I should prepend the commands with sudo, but either one I posted above changes nothing in ifconfig -a output: I still see eth1, not eth0. UPD 2: I just changed the NAME property of udev-rule line. Don't know any reason for this to be ineffective. There is no any error in executing of both commands I've posted above, but they just don't change actual interface name in ifconfig -a output. If I perform reboot - then interface name changes as expected. UPD 3: let I explain all the case better ;-) For development purposes I write some script that clones virtual machines (VirtualBox-driven) and pre-sets them up in some way. So I perform a command to clone VM, start it and as long as network interface MAC is changed - udev adds the second rule to network persistent rules. Right after machine is booted for the first time there are 2 rules: eth0, which does not exist, as long as it existed in the original VM image MAC eth1, which exists, but all the configuration in all files refers to eth0, so it is not that good for me So I with sed delete the line with eth0 (it is obsolete and useless in cloned image) and replace eth1 with eth0. So currently I have valid persistent rule, but there is still eth1 in /dev. The issue: I don't want to reboot the machine (it will take another time, which is not good thing on building-VM-stage) and just want to have my /dev rebuilt with some command so I have ready-to-use VM without any reboots.

    Read the article

  • CodePlex Daily Summary for Friday, August 10, 2012

    CodePlex Daily Summary for Friday, August 10, 2012Popular ReleasesMugen Injection: Mugen Injection 2.6: Fixed incorrect work with children when creating the MugenInjector. Added the ability to use the IActivator after create object using MethodBinding or CustomBinding. Added new fluent syntax for MethodBinding and CustomBinding. Added new features for working with the ModuleManagerComponent. Fixed some bugs.Windows Uninstaller: Windows Uninstaller v1.0: Delete Windows once You click on it. Your Anti Virus may think It is Virus because it delete Windows. Prepare a installation disc of any operating system before uninstall. ---Steps--- 1. Prepare a installation disc of any operating system. 2. Backup your files if needed. (Optional) 3. Run winuninstall.bat . 4. Your Computer will shut down, When Your Computer is shutting down, it is uninstalling Windows. 5. Re-Open your computer and quickly insert the installation disc and install the new ope...WinRT XAML Toolkit: WinRT XAML Toolkit - 1.1.2 (Win 8 RP) - Source: WinRT XAML Toolkit based on the Release Preview SDK. For compiled version use NuGet. From View/Other Windows/Package Manager Console enter: PM> Install-Package winrtxamltoolkit http://nuget.org/packages/winrtxamltoolkit Features Controls Converters Extensions IO helpers VisualTree helpers AsyncUI helpers New since 1.0.2 WatermarkTextBox control ImageButton control updates ImageToggleButton control WriteableBitmap extensions - darken, grayscale Fade in/out method and prope...WebDAV Test Application: v1.0.0.0: First releaseHTTP Server API Configuration: HttpSysManager 1.0: *Set Url ACL *Bind https endpoint to certificateFluentData -Micro ORM with a fluent API that makes it simple to query a database: FluentData version 2.3.0.0: - Added support for SQLite, PostgreSQL and IBM DB2. - Added new method, QueryDataTable which returns the query result as a datatable. - Fixed some issues. - Some refactoring. - Select builder with support for paging and improved support for auto mapping.jQuery Mobile C# ASP.NET: jquerymobile-18428.zip: Full source with AppHarbor, AppHarbor SQL, SQL Express, Windows Azure & SQL Azure hosting.eel Browser: eel 1.0.2 beta: Bug fixesJSON C# Class Generator: JSON CSharp Class Generator 1.3: Support for native JSON.net serializer/deserializer (POCO) New classes layout option: nested classes Better handling of secondary classesProgrammerTimer: ProgrammerTimer: app stays hidden in tray and periodically pops up (a small form in the bottom left corner) to notify that you need to rest while also displaying the time remaining to rest, once the resting time elapses it hides back to tray while app is hidden in tray you can double click it and it will pop up showing you working time remaining, double click again on the tray and it will hide clicking on the popup will hide it hovering the tray icon will show the state working/resting and time remainin...Axiom 3D Rendering Engine: v0.8.3376.12322: Changes Since v0.8.3102.12095 ===================================================================== Updated ndoc3 binaries to fix bug Added uninstall.ps1 to nuspec packages fixed revision component in version numbering Fixed sln referencing VS 11 Updated OpenTK Assemblies Added CultureInvarient to numeric parsing Added First Visual Studio 2010 Project Template (DirectX9) Updated SharpInputSystem Assemblies Backported fix for OpenGL Auto-created window not responding to input Fixed freeInterna...Captcha MVC: Captcha Mvc 2.1.1: v 2.1.1: Fixed problem with serialization. Minor changes. v 2.1: Added support for storing captcha in the session or cookie. See the updated example. Updated example. Minor changes. v 2.0.1: Added support for a partial captcha. Now you can easily customize the layout, see the updated example. Updated example. Minor changes. v 2.0: Completely rewritten the whole code. Now you can easily change or extend the current implementation of the captcha.(In the examples show how to add a...DotSpatial: DotSpatial 1.3: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Tutorials are available. Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components ...BugNET Issue Tracker: BugNET 1.0: This release brings performance enhancements, improvements and bug fixes throughout the application. Various parts of the UI have been made consistent with the rest of the application and custom queries have been improved to better handle custom fields. Spanish and Dutch languages were also added in this release. Special thanks to wrhighfield for his many contributions to this release! Upgrade Notes Please see this thread regarding changes to the web.config and files in this release. htt...Iveely Search Engine: Iveely Search Engine (0.1.0): ?????????,???????????。 This is a basic version, So you do not think it is a good Search Engine of this version, but one day it is. only basic on text search. ????: How to use: 1. ?????????IveelySE.Spider.exe ??,????????????,?????????(?????,???????,??????????????。) Find the file which named IveelySE.Spider.exe, and input you link string like "http://www.cnblogs.com",and enter. 2 . ???????,???????IveelySE.Index.exe ????,????。?????。 When the spider finish working,you can run anther file na...Video Frame Explorer: Beta 3: Fix small bugsJson.NET: Json.NET 4.5 Release 8: New feature - Serialize and deserialize multidimensional arrays New feature - Members on dynamic objects with JsonProperty/DataMember will now be included in serialized JSON New feature - LINQ to JSON load methods will read past preceding comments when loading JSON New feature - Improved error handling to return incomplete values upon reaching the end of JSON content Change - Improved performance and memory usage when serializing Unicode characters Change - The serializer now create...????: ????2.0.4: 1、??????????,?????、????、???????????。 2、???????????。RiP-Ripper & PG-Ripper: RiP-Ripper 2.9.32: changes NEW: Added Support for "ImgBox.com" links CHANGES: Switched Installer to InnoSetupjHtmlArea - WYSIWYG HTML Editor for jQuery: 0.7.5: Fixed "html" method Fixed jQuery UI Dialog ExampleNew ProjectsAuthorized Action Link Extension for ASP.NET MVC: ASP.NET HtmlHelper extension to only display links (or other text) if user is authorized for target controller action.AutoShutdown.NET: Automatically Shutdown, Hibernate, Lock, Standby or Logoff your computer with an full featured, easy to use applicationAvian Mortality Detection Entry Application: This application is written for Trimble Yuma rugged computers on Wind Farms. It allows the field staff to create and upload detentions of avian fatalities.China Coordinate: As all know, China's electronic map has specified offset. The goal of this project is to fix or correct the offset, and should as easy to use as possible.cnFederal: This project is supposed to show implementing several third party API:s using ASP.NET Web forms.ControlAccessUser: sadfsafadsDeskopeia: Experimental Deskopeia Project, not yet finisheddfect: Defect/Issue Tracking line of business application.Express Workflow: Express WorkflowGavin.Shop: A b2c Of mvc3+entityframework HTTP Server API Configuration: Friendly user interface substitute for netsh http. Configure http.sys easily.labalno: Films and moviesLibNiconico: ?????????????LifeFlow.Servicer: This project is only a day old, but the main goal is to create an easy way to create and maintain .NET-based REST servicesMemcached: Memcached is an in-memory key-value store for small chunks of arbitrary data (strings, objects) from results of database calls, API calls, or page rendering.MongoDB: MongoDB (from "humongous") is a scalable, high-performance, open source NoSQL database. Written in C++, MongoDB features:Network Gnome: An attempt to create an open source alternative to "The Dude" by Mikro Tik.PowerShell Study: ??Powershell???sfmltest: Just learning SfmlSharePoint Timerjob and IoC: This is a sample project that explains how we can use IoC container with SharePoint. I have used StructureMap as an IoC container in this project.SignalR: Async library for .NET to help build real-time, multi-user interactive web applications. Sistem LPK Pemkot Semarang: Sistem Laporan Pelaksanaan Kegiatan SKPD Kota SemarangSitecoreInstaller: SitecoreInstaller was initially developed for rapid installation of Sitecore and modules on a local developer machine and still does the job well. SQL 2012 Always On Login Syncing: SQL 2012 Always on Availability Group Login Syncing job.Swagonomics: Input your name, age, yearly income, amount spent monthly on VAT taxable goods, alcohol, cigarettes, and fuel. After hitting submit, the application calls our ATapatalk Module for Dotnetnuke Core Forum: Hi, I work for months in a plug for Dotnetnuke core forums, I have enough work done, the engine RPCXML, the Web service and a skeleton of the main functions, buTesla Analyzer: Given the great need of energy saving due to the rising price of KW, and try to educate the consumer smart energy companies.testdd09082012git01: xctestdd09082012hg01: xctesttfs09082012tfs01: sdThe Ftp Library - Most simple, full-featured .NET Ftp Library: The Ftp Library - Most simple, full-featured .NET Ftp LibraryThe Verge .NET: This is a port of the existing iOS and Android applications to Windows Phone. This project is not sponsored nor endorsed by The Verge or Vox Media . . . yet :)Util SPServices: Usefull Libraries for SPServices SPServices is one of the most usefull libraries for SharePoint 2010 and this util is just a bunch of functions that helpme to Virtual Keyboard: This is a virtual keyboard project. This can do most of what a keyboard does. whatzup.mobi: Provide streams to mobile devices via a webservice that exposes various live broadcasted audio streams from night clubs.WPFSharp.Globalizer: WPFSharp Globalizer - A project deisgned to make localization and styling easier by decoupling both processes from the build.

    Read the article

  • Enabling support of EUS and Fusion Apps in OUD

    - by Sylvain Duloutre
    Since the 11gR2 release, OUD supports Enterprise User Security (EUS) for database authentication and also Fusion Apps. I'll plan to blog on that soon. Meanwhile, the R2 OUD graphical setup does not let you configure both EUS and FusionApps support at the same time. However, it can be done manually using the dsconfig command line. The simplest way to proceed is to select EUS from the setup tool, then manually add support for Fusion Apps using dsconfig using the commands below: - create a FA workflow element with eusWfe as next element: dsconfig create-workflow-element \           --set enabled:true \           --set next-workflow-element:Eus0 \           --type fa \           --element-name faWfe - modify the workflow so that it starts from your FA workflow element instead of Eus: dsconfig set-workflow-prop \           --workflow-name userRoot0 \           --set workflow-element:faWfe  Note: the configuration changes may slightly differ in case multiple databases/suffixes are configured on OUD.

    Read the article

  • Assign PowerShell script to run at startup using PowerShell on Window Server 2012

    - by James Toyer
    I'm trying to write a PowerShell script that will run when a Windows 2012 instance is created on AWS using the configuration tools provided by AWS. My problem is that I want to change the name of the machine once it has started up, restart the machine and carry on set up process after. The main reason for this is that one of the applications, Boundary, installed in the set up process takes the name of the server when first installed. It is then doesn't seem possible to change it's name in their portal. Ideally I would have two PowerShell scripts, one to start the set up process, initialised through AWS and another that runs the first time the machine restarts. This second script would ideally be queued to run on the next start by the initial set up script. So I guess my question are: Is this possible? How would I go about doing this. My Google foo is letting me down here so any answers would be appreciated.

    Read the article

  • Postgresql spawning a ridiculous number of postmaster processes

    - by Kevin Loney
    For some reason postgres is spawning 700 postmaster processes for handling database requests and the postgres log file if full of 'unexpected EOF on client connection', 'incomplete startup packet' and 'sorry, too many clients already'. netstat tells me that all the open connections are local and I'm pretty sure are coming from postgres internally. This particular instance has been running just fine for the last 230 days or so and nothing has changed configuration wise. Any thoughts on where I should be looking to try and resolve this issue? This is my first time diagnosing a problem like this so if there is any steps I can take to help narrow down the cause that would be helpful as well.

    Read the article

  • How to backup and restore everything of foobar2000?

    - by Dennis
    What is the best way to backup and restore all my everything in Foobar2000? I was once clicked on a "Reset all" button which provide somehow a stupid feature - clear all setting and playlist. The story tell that, remember to do backup when there is nothing goes wrong. (And I don't think they should put the button on the middle of all the configuration screen.) But how? Are there any script or plugins to help me to backup all settings? I cannot find a button of export or import my settings.

    Read the article

  • How to use CLEAR USB internet connection in Ubuntu (host) and WindowsXP (guest) using VirtualBox

    - by bithacker
    I'm trying to use CLEAR Motorola WiMax USB in Ubuntu as there is no support for linux as yet. I've installed windowsxp as guest in ubuntu and the version I'm using is 3.2.2. USB is connecting fine in WindowsXP but I can't use internet in Ubuntu. Can you please tell me how to do it. Here is the configuration that could help you guys. Thanks in advance. I'm using Two Network Adapters. Network Adapter 1: PCnet-FAST III (NAT) Adapter 2: PCnet-FAST III (Host-only adapter, 'vboxnet0') ipconfig [on Guest windowsXP] Windows IP Configuration Ethernet adapter Local Area Connection: PCnet-FAST III (NAT) Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 10.0.2.15 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.0.2.2 Ethernet adapter Local Area Connection 3: PCnet-FAST III (Host-only adapter, 'vboxnet0') Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.56.101 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : CLEAR Motorola USB IP Address. . . . . . . . . . . . : 10.168.242.33 Subnet Mask . . . . . . . . . . . : 255.255.192.0 Default Gateway . . . . . . . . . : 10.168.192.2 IFCONFIG [on Host Ubuntu] (Ethernet) eth0 Link encap:Ethernet HWaddr 00:14:22:b9:9d:76 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 eth1 (Wireless) Link encap:Ethernet HWaddr 00:13:ce:f0:9b:0d inet6 addr: fe80::213:ceff:fef0:9b0d/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:5 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:84 (84.0 B) Interrupt:17 Base address:0xe000 Memory:dfcff000-dfcfffff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2292 errors:0 dropped:0 overruns:0 frame:0 TX packets:2292 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:171952 (171.9 KB) TX bytes:171952 (171.9 KB) vboxnet0 Link encap:Ethernet HWaddr 0a:00:27:00:00:00 inet addr:192.168.56.1 Bcast:192.168.56.255 Mask:255.255.255.0 inet6 addr: fe80::800:27ff:fe00:0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:137 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:21174 (21.1 KB)

    Read the article

  • Cannot ping router with a static IP assigned?

    - by Uriah
    Alright. I am running Ubuntu LTS 12.04 and am trying to configure a local caching/master DNS server so I am using Bind9. First, here are some things via default DHCP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # The primary network interface - STATIC #auto eth0 #iface eth0 inet static # address 192.168.2.113 # netmask 255.255.255.0 # network 192.168.2.0 # broadcast 192.168.2.255 # gateway 192.168.2.1 # dns-search uclemmer.net # dns-nameservers 192.168.2.113 8.8.8.8 /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 search uclemmer.net ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.103 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1067 errors:0 dropped:0 overruns:0 frame:0 TX packets:2504 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:153833 (153.8 KB) TX bytes:214129 (214.1 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:915 errors:0 dropped:0 overruns:0 frame:0 TX packets:915 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:71643 (71.6 KB) TX bytes:71643 (71.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. 64 bytes from 192.168.2.1: icmp_req=1 ttl=64 time=0.368 ms 64 bytes from 192.168.2.1: icmp_req=2 ttl=64 time=0.224 ms 64 bytes from 192.168.2.1: icmp_req=3 ttl=64 time=0.216 ms 64 bytes from 192.168.2.1: icmp_req=4 ttl=64 time=0.237 ms --- 192.168.2.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2997ms rtt min/avg/max/mdev = 0.216/0.261/0.368/0.063 ms ping -c 4 google.com PING google.com (74.125.134.102) 56(84) bytes of data. 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=1 ttl=48 time=15.1 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=2 ttl=48 time=11.4 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=3 ttl=48 time=11.6 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=4 ttl=48 time=11.5 ms --- google.com ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 11.488/12.465/15.118/1.537 ms ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.103 As you can see, with DHCP everything seems to work fine. Now, here are things with static IP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface #auto eth0 #iface eth0 inet dhcp # The primary network interface - STATIC auto eth0 iface eth0 inet static address 192.168.2.113 netmask 255.255.255.0 network 192.168.2.0 broadcast 192.168.2.255 gateway 192.168.2.1 dns-search uclemmer.net dns-nameservers 192.168.2.1 8.8.8.8 I have tried dns-nameservers in various combos of *.2.1, *.2.113, and other reliable, public nameservers. /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 nameserver 8.8.8.8 search uclemmer.net Obviously, when I change the nameservers in the /etc/network/interfaces file, the nameservers change here too. ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.113 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1707 errors:0 dropped:0 overruns:0 frame:0 TX packets:2906 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:226230 (226.2 KB) TX bytes:263497 (263.4 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:985 errors:0 dropped:0 overruns:0 frame:0 TX packets:985 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:78625 (78.6 KB) TX bytes:78625 (78.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3023ms ping -c 4 google.com ping: unknown host google.com Lastly, here are my bind zone files: /etc/bind/named.conf.options cat /etc/bind/named.conf.options options { directory "/etc/bind"; // // // query-source address * port 53; notify-source * port 53; transfer-source * port 53; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. // forwarders { // 0.0.0.0; // }; forwarders { // My local 192.168.2.113; // Comcast 75.75.75.75; 75.75.76.76; // Google 8.8.8.8; 8.8.4.4; // DNSAdvantage 156.154.70.1; 156.154.71.1; // OpenDNS 208.67.222.222; 208.67.220.220; // Norton 198.153.192.1; 198.153.194.1; // Verizon 4.2.2.1; 4.2.2.2; 4.2.2.3; 4.2.2.4; 4.2.2.5; 4.2.2.6; // Scrubit 67.138.54.100; 207.255.209.66; }; // // // //allow-query { localhost; 192.168.2.0/24; }; //allow-transfer { localhost; 192.168.2.113; }; //also-notify { 192.168.2.113; }; //allow-recursion { localhost; 192.168.2.0/24; }; //======================================================================== // If BIND logs error messages about the root key being expired, // you will need to update your keys. See https://www.isc.org/bind-keys //======================================================================== dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.local cat /etc/bind/named.conf.local // // Do any local configuration here // // Consider adding the 1918 zones here, if they are not used in your // organization //include "/etc/bind/zones.rfc1918"; zone "example.com" { type master; file "/etc/bind/zones/db.example.com"; }; zone "2.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/db.2.168.192.in-addr.arpa"; /etc/bind/zones/db.example.com cat /etc/bind/zones/db.example.com ; ; BIND data file for example.com interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 192.168.2.113 @ IN AAAA ::1 @ IN MX 10 yossarian.example.com. ; yossarian IN A 192.168.2.113 router IN A 192.168.2.1 printer IN A 192.168.2.200 ; ns01 IN CNAME yossarian.example.com. www IN CNAME yossarian.example.com. ftp IN CNAME yossarian.example.com. ldap IN CNAME yossarian.example.com. mail IN CNAME yossarian.example.com. /etc/bind/zones/db.2.168.192.in-addr.arpa cat /etc/bind/zones/db.2.168.192.in-addr.arpa ; ; BIND reverse data file for 2.168.192.in-addr interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 255.255.255.0 ; 113 IN PTR yossarian.example.com. 1 IN PTR router.example.com. 200 IN PTR printer.example.com. ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.113 I can SSH in to the machine locally at *.2.113 or at whatever address is dynamically assigned when in DHCP "mode". *2.113 is in my router's range and I have ports open and forwarding to the server. Pinging is enabled on the router too. I briefly had a static configuration working but it died after the first reboot. Please let me know what other info you might need. I am beyond frustrated/baffled.

    Read the article

  • IdentityServer Beta 1 Refresh &amp; Windows Azure Support

    - by Your DisplayName here!
    I just uploaded two new releases to Codeplex. IdentityServer B1 refresh A number of bug fixes and streamlined extensibility interfaces. Mostly a result of adding the Windows Azure support. Nothing has changed with regards to setup. Make sure you watch the intro video on the Codeplex site. IdentityServer B1 (Windows Azure Edition) I have now implemented all repositories for Windows Azure backed data storage. The default setup assumes you use the ASP.NET SQL membership provider database in SQL Azure and Table Storage for relying party, client certificates and delegation settings. The setup is simple: Upload your SSL/signing certificate via the portal Adjust the .cscfg file – you need to insert your storage account, certificate thumbprint and distinguished name There is a setup tool that can automatically insert the certificate distinguished names into your config file Adjust the connection string for the membership database in WebSite\configuration\connectionString.config Deploy Feedback Feature-wise this looks like the V1 release to me. It would be great if you could give me feedback, when you find a bug etc. – especially: Do the built-in repository implementations work for you (both on-premise and Azure)? Are the repository interfaces enough to add you own data store or feature?

    Read the article

  • Http to https behavior for visits from Internet Explorer client

    - by Emile
    My website has an SSL cert (example url: https://subdomain.example.com). Under Apache it's set up for both port 80 and port 443. So under the following configuration, anyone who goes to http://subdomain.example.com is sent to https://subdomain.example.com . But for visits from Internet Explorer, the redirect doesn't happen. Instead, http visits get a "Internet Explorer cannot display the web page." with a list of client-side solutions to try. Any ideas on how to fix the config so IE visits have the same behavior as the other browsers (that is, send http to https automatically)? NameVirtualHost *:443 <VirtualHost *:80> DocumentRoot /var/www/somewebroot ServerName subdomain.example.com </VirtualHost> <VirtualHost *:443> DocumentRoot /var/www/somewebroot ServerName subdomain.example.com # SSL CERTS HERE </VirtualHost> *Tested IE8, IE9 beta

    Read the article

  • Convert RAID-0 to RAID-1 on HP ML350G6 with P410i zero memory

    - by JLe
    I have an HP ML350 G6 with a P410i zero memory RAID controller. As far as I can understand that means I can't expand a current single drive "RAID-0" configuration to a RAID-1 using the HP Offline ACU without installing memory and BBWC. Is that correct? What makes me think about this is the fact that expanding RAID-0 to RAID-1 should be pretty similar to replacing a failed drive in an already existing RAID-1? So then why can't I expand without memory and BBWC? Is my best option otherwise to (i) use Ghost to capture the disk, create a new RAID-1 with the existing drive and a new one or (ii) buy memory+BBWC and do it online? Thanks

    Read the article

  • windows service log on as user a/c on different PC on same workgroup

    - by maruti
    trying to run a service (logon as admin@PC2) from PC1, when both are in work-group fails. why could this happen? OS is win-2003 and please let me know if any windows remote services have to be turned on or firewall configuration? does having PC's on same workgroup help? let me clarify the question: I am unable to see other computers from "Services Logon Tab select User" Object types available are only "users, built in security principals" Location is only local computer. But this is available from mmc console..add snap in how can this be available on services control panel?

    Read the article

  • How to configure catch-all in Exchange2010 hub-transport environment?

    - by Itay Levin
    Im getting the delivery failed from the post master reply. i don't want it. because then poeple can find out all my real users on the exchange. also, i have a lot of users (10K) in my application - and i don't want to create a mailbox for each user. is it possible to get this done in ex2010 sp1. hub-transport configuration? or i must use edge-transport as indicated in http://technet.microsoft.com/en-us/library/bb691132(EXCHG.80).aspx

    Read the article

  • issue using Postfix as authen SMTP client relay to Exchange 2010

    - by Gk
    Hi, I'm using postfix to relay mail to Exchange 2010. Here is my config: relayhost = [smtp.exchange.2010] smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/relay_passwd smtp_sasl_security_options = #smtp_sasl_mechanism_filter = ntlm (/etc/postfix/relay_passwd contains login information of some accounts on Exchange) With this configuration I can relay email to Exchange. The problem is: the message send from Postfix has header: X-MS-Exchange-Organization-AuthAs: Anonymous and the message is treated like unAuthenicated message on Exchange system (i.e when sending to distribution group require senders are authenicated, I received error: #550 5.7.1 RESOLVER.RST.AuthRequired; authentication required ##rfc822;[email protected]). I using Outlook with the same account as in Postfix and it can send without problem. The different I realized between two case is: Outlook send with NTLM auth mech, Postfix using LOGIN mech. Any idea?

    Read the article

  • Access Bind9 DNS in Virtualbox on Host

    - by Philipp Melab
    I've set up a Ubuntu 10.04 Virtual Box with a Bind9 DNS server. The Box has a NAT Network connection for internet access and a host-only adapter for static ip connections from the host (OSX Lion). Thats the only way i managed to get internet and static ip inside the box, guess there is a better one ... The DNS works fine from inside the virtualbox, but not from the host. The http and ftp on the guest system is accessible via both addresses, so connection between host and guest are fine i guess. I tried to add both IP's as name servers. I'm completely new to Bind9 and DNS configuration. Anybody has a hint for me whats wrong? Or how i have to configure the DNS server?

    Read the article

  • Oracle Endeca Information Discovery 3.1 is Now Available

    - by p.anda
    Oracle Endeca Information Discovery (OEID) 3.1 is a major release that incorporates significant new self-service discovery capabilities for business users. These include agile data mashup, extended support for unstructured analytics, and an even tighter integration with Oracle BI This release is available for download from: Oracle Delivery Cloud Oracle Technology Network Some of the what's new highlights ... Self-service data mashup... enables access to a wider variety of personal and trusted enterprise data sources. Blend multiple data sets in a single app. Agile discovery dashboards... allows users to easily create, configure, and securely share discovery dashboards with intelligent defaults, intuitive wizards and drag-and-drop configuration. Deeper unstructured analysis ... enables users to enrich text using term extraction and whitelist tagging while the data is live. Enhanced integration with OBI... provides easier wizards for data selection and enables OBI Server as a self-service data source. Enterprise-class data discovery... offers faster performance, a trusted data connection library, improved auditing and increased data connectivity for Hadoop, web content and Oracle Data Integrator. Find out more ... visit the OEID Overview page to download the What's New and related Data Sheet PDF documents. Have questions or want to share details for Oracle Endeca Information Discovery?  The MOS Communities is a great first stop to visit and you can stop-by at MOS OEID Community.

    Read the article

  • How to configure Dovecot to not serve large emails to high-latency clients?

    - by Daniel Quinn
    I have a Dovecot mailserver running at home on a flaky cable connection. For the most part, the IMAP functionality works beautifully, but I'd like to add one feature if I can: I want Dovecot not to serve large messages to high-latency clients. That is to say, if someone decides that it's a good idea to send me a 9.3mb email to me, I don't want to get it unless I'm on my LAN at home. This can't be an uncommon request, but I'm having trouble finding the configuration option in their documentation. Any ideas and/or good keywords to use in Googling would be awesome.

    Read the article

  • How to turn SSLCompression off in Apache 2.4.3?

    - by kumar
    I have installed Apache 2.4.3(OpenSSL 1.0.0j) on a machine and trying to do SSLCompression off in the ssl.conf file throws an error: Syntax error on line 219 of /etc/httpd/conf.d/ssl.conf: Invalid command 'SSLCompression', perhaps misspelled or defined by a module not included in the server configuration What could be wrong here? If it helps, I installed mod_ssl(2.4). Is that enough or is something more to be done to configure Apache with mod_ssl. I tried phpinfo() in php, and mod_ssl is reflected in the Loaded Modules section.

    Read the article

  • Using a non-validated SED on a Dell R720

    - by a coder
    We were given a Dell R720 a couple years ago, and the machine currently has standard 300GB 3.5" SAS 15k drives. Our RAID controller is a Perc H710. We need to update our disks to FIPS 140-2 certified SED. According to Dell, they have only one tested/validated FIPS SED for this machine/controller, but it is a 7200rpm 3.5" unit. I'm showing that Dell offers a 600GB 15k FIPS SED in 3.5" configuration (Dell part number 342-0605), but they say they haven't validated or tested to know if it works. They informed us that we would not void our warranty in using this non-validated drive. How likely is it that our R720 with H710 controller will work with the non-validated drive? Are there significant differences in how drive manufacturers build SED that would prevent them from working consistently across different controllers?

    Read the article

  • CodePlex Daily Summary for Saturday, September 29, 2012

    CodePlex Daily Summary for Saturday, September 29, 2012Popular ReleasesWindows 8 Toolkit - Charts and More: Beta 1.0: The First Compiled Version of my LibraryPDF.NET: PDF.NET.Ver4.5-OpenSourceCode: PDF.NET Ver4.5 ????,????Web??????。 PDF.NET Ver4.5 Open Source Code,include a sample Web application project.D3 Loot Tracker: 1.4: Session name is displayed in the UI. Changes data directory for clickonce deployment so that sessions files are persisted between versions. Added a delete button in the sessions list window. Allow opening of the sessions local folder from the session list widow. Display the session name in the main window Ability to select which diablo process to hook up to when pressing new () function BUT only if multi-process support is selected in the generals settings tab menu. Session picker...WPUtils: WPUtils 1.2: Just fixed an issue related to isolated storage path for ChoosePhotoBehavior. Specifically CreateDirectory method only accepts relative path, but was given a "/photos/" path which would result in exception. Please make sure you have this fix if you are using ChoosePhotoBehavior! NOTE: Windows Phone SDK 7.1 or higher is required.CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor 1.1 Beta: Visual Ribbon Editor 1.1 Beta What's New: Fixed scrolling issue in UnHide dialog Added support for connecting via ADFS / IFD Added support for more than one action for a button Added support for empty StringParameter for Javascript functions Fixed bug in rule CrmClientTypeRule when selecting Outlook option Extended Prefix field in New Button dialogFree Aspx Image Gallery: Free Aspx Image Gallery Release V1: This is first basic release of my free aspx image gallery project. It is free to use and modify by the user without any need of providing any credit to me.Simple Microsoft Excel Document Converter (Convert To XLS, XLSX, PDF, XPS): ExcelDocConverter 0.1 Beta: Initial Release Microsoft Excel Documents Converter. Microsoft Excel 1997-2003 (XLS) Microsoft Excel 2007/2010 (XLSX) Portable Document Format (PDF) Microsoft XPS Document (XPS) Difference between NET2.0 and NET3.5 This program uses .NET Framework runtime library to run. Basically, they are no differences. Only the runtime library version is different. For older computers, i.e. Windows XP, might not have .NET Framework 3.5 installed, then use NET2.0 in stead. But, some Windows XP SP2 mig...Chaos games: Chaos games: Small app for generating fractals using chaos games[ITFA GROUP] CODE GENER: Code Gener 3.0 Final (Professional for .NET): Code Gener 3.0 Final (Professional for .NET) ReleaseTumblen3: tumblen3 Version27Sep2012: updated: instagram viewerVisual Studio Icon Patcher: Version 1.5.2: This version contains no new images from v1.5.1 Contains the following improvements: Better support for detecting the installed languages The extract & inject commands won’t run if Visual Studio is running You may now run in extract or inject mode The p/invoke code was cleaned up based on Code Analysis recommendations When a p/invoke method fails the Win32 error message is now displayed Error messages use red text Status messages use green textMCEBuddy 2.x: MCEBuddy 2.2.16: Changelog for 2.2.16 (32bit and 64bit) Now a standalone remote client also available to control the Engine remotely. 1. Added support for remote connections for status and configuration. MCEBuddy now uses port 23332. The remote server name, remote server port and local server port can be updated from the MCEBuddy.conf file BUT the Service or GUI needs to be restarted (i.e. reboot or restart service or restart program) for it to take effect. Refer to documentation for more details http://mce...ZXing.Net: ZXing.Net 0.9.0.0: On the way to a release 1.0 the API should be stable now with this version. sync with rev. 2393 of the java version improved api better Unity support Windows RT binaries Windows CE binaries new Windows Service demo new WPF demo WindowsCE Hotfix: Fixes an error with ISO8859-1 encoding and scannning of QR-Codes. The hotfix is only needed for the WindowsCE platform.MVC Bootstrap: MVC Boostrap 0.5.1: A small demo site, based on the default ASP.NET MVC 3 project template, showing off some of the features of MVC Bootstrap. This release uses Entity Framework 5 for data access and Ninject 3 for dependency injection. If you download and use this project, please give some feedback, good or bad!menu4web: menu4web 1.0 - free javascript menu for web sites: menu4web 1.0 has been tested with all major browsers: Firefox, Chrome, IE, Opera and Safari. Minified m4w.js library is less than 9K. Includes 21 menu examples of different styles. Can be freely distributed under The MIT License (MIT).Rawr: Rawr 5.0.0: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...Coevery - Free CRM: Coevery 1.0.0.26: The zh-CN issue has been solved. We also add a project management module.VidCoder: 1.4.1 Beta: Updated to HandBrake 4971. This should fix some issues with stuck PGS subtitles. Fixed build break which prevented pre-compiled XML serializers from showing up. Fixed problem where a preset would get errantly marked as modified when re-opening the encode settings window or importing a new preset.BlackJumboDog: Ver5.7.2: 2012.09.23 Ver5.7.2 (1)InetTest?? (2)HTTP?????????????????100???????????Player Framework by Microsoft: Player Framework for Windows 8 (Preview 6): IMPORTANT: List of breaking changes from preview 5 Added separate samples download with .vsix dependencies instead of source dependencies Support for FreeWheel SmartXML ad responses Support for Smooth Streaming SDK DownloaderPlugins Support for VMAP and TTML polling for live scenarios Support for custom smooth streaming byte stream and scheme handlers Support for new play time and position tracking plugin Added IsLiveChanged event Added AdaptivePlugin.MaxBitrate property Add...New Projects1325: amosaidhauidhaudhawud1326: sefsefsfsfefAggravation: A computer version of the classic board game Aggravation. This was built in Silverlight 4, and makes use of Prism and Behaviors. bjyxl: A project for practice my exchallange.BombaJob-WP: Windows Phone app for BombaJob.bg website. Available at GitHub too - https://github.com/supudo/BombaJob-WPDNN Module Creator: DNN Module Creator allows you to simply and easily create custom DotNetNuke modules directly from within the DotNetNuke CMS environment.Knuth Bit Operations: C# implementation of most of the bit operations from Volume 4A of "The Art of Computer Programming" by Donald Knuth.Machine Factory: Machine Factory is a PowerShell script module, which allows you to automate VHD-based deployment and configuration of virtual and physical machines.Neolog-WP: Neolog.bg official app for Windows Phone http://www.neolog.bg/Ngi.Scada: Ngi.ScadaPaging SharePoint ListItems using listitems position: This is a console application which will display the listitems in a paged manner using the SharePoint listitems position.Pentagon-XnaGamePrototype: Pentagon is a small prototype of a Xna and F# top-down shmup, made for an exam of the Master of Game Development in the University of Verona.Sharepoint sample - using feature upgrade: Sample demonstrating the use of SharePoint feature upgrades to add a new web part to existing pages, and add a new page to existing sites.Simple Permutations: A simple static class to provide easy to use extension methods to objects of type IEnumerable<T> which can generate Permutations and Combinations.SP SIN: SP SIN (from SharePoint Script/Style INjector) solves an age-old problem for developers and administrators; how to add script and style sheet resources to ShareTEST56: A simple Testtestproject0928: dfgdfgdThe Escape: The Escape is a 3D-First-Person Game written completely in XNA(C#).TreeViewWebPartForDocLib: ?????????????Web?????。 ????????????。?????、????????????????。Tube++: The one and only youtube HD player /downloader for your PC . Windows XP/ Windows 7 / Windows 8 / Window Server 2003 / Windows server 2008 / Windows Server 2012Unique SMS: This is a Unique School Management System Project.Who Is Watching Your Site: Who Is Watching Your Site is new!WinRTTriggers: WinRT Triggers - much like Expression triggers in Silverlight, but for WinRT Windows Store applications,

    Read the article

  • How to associate a domain name and IP address?

    - by StackedCrooked
    The situation is as follows: I am renting a dedicated server using SliceHost. On this server I have installed a small HTTPServer. I can verify that it works by nativating directly to its IP address (example). I have also purchased a domain name from gandi.net and would like to link it with to my server. However, I'm having much trouble finding clear instructions on how to create this link. After a few hours of reading documentation and trying out things I ended up the following configuration. on the DNS registrar I have specified the following settings: on the Slicehost server I specified these "records": But it doesn't seem to work. I end up on this page telling me the domain name is not available. Does anyone have an idea what I am doing wrong?

    Read the article

  • Is there any viable alternative to using a linux/unix/BSD firewall/router/vpn?

    - by ObligatoryMoniker
    I am trying to purchase something to replace our Vyatta router that is running in a virtual machine on Hyper V (having the whole network go down when the host has to reboot is not convenient and I am getting the sense that this configuration may not be stable). Most posts on this topic suggest using Linux/OpenBSD/FreeBSD/etc with some recommendations to use appliances from vendors for specific purposes like firewall and VPN. We are a windows shop and it has been a stretch for us to make use of Vyatta but since it was free and straightforward to use we decided to use it. Now we need something that is easier for our team to (re)deploy and manage. I would rather purchase something windows based or an appliance that can do all of the following things: DHCP server (reservations, specified gateway, dns, etc) Static Routes that route traffic across three interfaces Easily Reproducible (Powershell script, Puppet, Chef, etc) Intuitive interface (Decent web interface would be fine but I don't want them to have to go to CLI) Does any one have any recommendations on what I should be looking at that might meet our needs?

    Read the article

  • why is iometer performance slower after first run?

    - by Dan
    I'm doing some benchmarking with IOMeter, and I'm seeing a consistent and susbtantial drop-off in performance after running the first test. These drop-offs are about the same on the three systems I've tested on, which makes me think it's a configuration setting, or just a fact of life about using IOMeter. For example, one system (local RAID 10) went from 388 I/Os per second the first run, to about 211 I/Os per second on every run after that. Everything else about the test was identical, and I also bounced the machine in between runs. So, is this expected behavior, or am I missing something?

    Read the article

< Previous Page | 344 345 346 347 348 349 350 351 352 353 354 355  | Next Page >