Search Results

Search found 11985 results on 480 pages for 'legal issues'.

Page 348/480 | < Previous Page | 344 345 346 347 348 349 350 351 352 353 354 355  | Next Page >

  • Keyboards for kiosk/outdoor/abusive environments?

    - by Justin Scott
    We have a bunch of kiosks deployed into let's just say... abusive environments. The enclosures we had built are touch as nails, and the HP thin client computers are working great. The keyboards that were purchased for the project have been nothing but problems. They're a generic brand direct from a Chinese manufacturer. They're stainless steel with keys mounted from the inside and a trackball, but they've been deployed for only a month and nearly 20% of them are already out of service due to keys sticking, keys not working, trackball problems, water damage, and a variety of other issues. Are there any kiosk keyboards that can take a beating without breaking so easily? Ideally they should be tamper-proof (keys can't be removed), waterproof, lettering should be engraved into the keys, trackball, option for a single mouse button would be nice, and some protection to keep debris out of the keys so they don't stick (sticky cleaners, food debris, etc.). Does such a beast exist? Everything we've looked at is susceptible to easy damage. We need the M1 Abrams Tank of keyboards. Any suggestions?

    Read the article

  • Global Address List, Multiple All Address Lists in CN=Address Lists Container

    - by Jonathan
    When my colleges (that was way before my time here) updated Exchange 2000 to 2003 a English All Address Lists appeared in addition to the German variant. The English All Address Lists have German titled GAL below it. This has just been a cosmetic problem for the last few years. Now as we are in the process of rolling out Exchange 2010 this causes some issues. Exchange 2010 picked the wrong i.e. English Address Lists Container to use. In ADSI Editor we see CN=All Address Lists,CN=Address Lists Container,CN=exchange org,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain and CN=Alle Adresslisten,CN=Address Lists Container,CN=exchange org,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain. In the addressBookRoots attribute of CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain both address lists were stored as values. We removed the English variant from addressBookRoots and restarted all (old and new) Exchange servers. User with mailboxes on the Exchange 2003 now only sees the German variant. Exchange 2010 is still stuck with the English/Mixed variant as are Users on Exchange 2010. Our goal would be to have Outlook display the German title of All Address Lists and get rid of the wrong Address Lists Container.

    Read the article

  • CD-ROM Cant Be Accessed After Installing VMware Tools on VMware Server 2.0.2

    - by Optimal Solutions
    Using VMware Server 2.02, I set up a new VM (Windows XP Pro) applied all of the updates, added Windows addons from the install CD, etc... I got it to a stable point and up through that point I was able to access the CD-ROM drive (E: on my host). What I never did before was install "VMware Tools" and since it claims to give better mouse and video support, I gave it a shot. What it does is it places the install package in a virtual CD-ROM drive. I ran the install, no errors and it wants a reboot. I log back in after reboot and pop in the install CD for Microsoft Office 2003 and I receive the message "Please Insert A Disc Into Drive D:". Drive D: would be the next logical drive after the C: drive where I chose to install the OS. The message box sits there and if I click "Cancel", to return to Windows Explorer, the status bar seems to blink ever 1/2 second - as if its polling for a CD-ROM drive or something. No bangs or exclamations in the Device Manager for any hardware. I had taken a snapshot prior to the VMware Tools install and upon restoring it, the CD-ROM is back. I made copies of two other VMs, installed the VMware Tools on those VMs and both experienced the same issues: Windows 2003 Server and Windows 7 (32-bit). Has anyone seen this issue and know of a fix for this? It would be nice to have the better graphics and better mouse control AND use my CD-ROM drive as well! Thank you.

    Read the article

  • Karmic iptables missing kernel moduyles on OpenVZ container

    - by luison
    After an unsuccessful p2v migration of my Ubuntu server to an OpenVZ container which I am stack with I thought I would give a try to a reinstall based on a clean OpenVZ template for Ubuntu 9.10 (from the OpenVZ wiki) When I try to load my iptables rules on the VM machine I've been getting errors which I believe are related to kernel modules not being loaded on the VM from the /vz/XXX.conf template model. I've been testing with a few post I've found but I was stack with the error: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. FATAL: Could not load /lib/modules/2.6.24-10-pve/modules.dep: No such file or directory iptables-restore v1.4.4: iptables-restore: unable to initialize table 'raw' Error occurred at line: 2 Try `iptables-restore -h' or 'iptables-restore --help' for more information. I read about the template not loading all iptables modules so I added modules to the XXX.conf of the VZ virtual machine like this: IPTABLES="ip_tables iptable_filter iptable_mangle ipt_limit ipt_multiport ipt_tos ipt_TOS ipt_REJECT ipt_TCPMSS ipt_tcpmss ipt_ttl ipt_LOG ipt_length ip_conntrack ip_conntrack_ftp ip_conntrack_irc ipt_conntrack ipt_state ipt_helper iptable_nat ip_nat_ftp ip_nat_irc" As the error remained I read that I should build dependencies again on the virtual machine: depmod -a but this returned an error: WARNING: Couldn't open directory /lib/modules/2.6.24-10-pve: No such file or directory FATAL: Could not open /lib/modules/2.6.24-10-pve/modules.dep.temp for writing: No such file or directory So I read again about creating the directory empty and redoing "depmod -a" it. I now don't get the dependancies error but get this and I don't have a clue how to proceed: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. FATAL: Module ip_tables not found. iptables-restore v1.4.4: iptables-restore: unable to initialize table 'raw' Error occurred at line: 2 Try `iptables-restore -h' or 'iptables-restore --help' for more information. I understand that iptables rules have to be different on the VM machine and perhaps some of the rules we are trying to apply (from our physical server) are not compatible but these are just source IP and destination port checks that I would like to be able to have available . I've heard that on the CentOS template there are no issues with this, so I understand is to do with VM config. Any help would be greatly appreciated.

    Read the article

  • How to utilize Varnish for A/B Testing and Feature Rollout?

    - by Ken
    Hi all, wasn't really sure if this should go here on or stackoverlow - admins, please move if i'm mistaken (and sorry). Today we have our web layer exposed to the world. We would like to add Varnish in front of our web layer to accelerate the site and reduce calls to the backend. However, we have some concerns and i was wondering how most people approach them: A/B Testing - How do you test two "versions" of each page and compare? I mean, how does varnish know which page to serve up? If and how do you save seperate versions on each page? Feature rollout - how would you set up a simple feature rollout mechanism? Let's say i want to open a new feature/page to just 10% of the traffic.. and then later increase that to 20%? How do you handle code deployments? Do you purge your entire varnish cache every deployment? (We have deployments on a daily basis). Or do you just let it slowly expire (using TTL)? Any ideas and examples regarding these issues is greatly appreciated! Thanks in advance. Ken.

    Read the article

  • Exchange 2010 Mail Enabled Public Folder Unable to Recieve External (anon) e-mail.

    - by Alex
    Hello All, I am having issues with my "Public Folders" mail enabled folders receiving e-mails from external senders. The folder is setup with three Accepted Domains (names changed for privacy reasons): 1 - domain1.com (primary & Authoritative) 2 - domain2.com (Authoritative) 3 - domain3.com (Authoritative) When someone attempts to send an e-mail to [email protected] from inside the organization, the e-mail is received and placed in the appropriate folder. However, when someone tries to send an e-mail from outside the organization (such as a gmail account), the following error message is received: "Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 554 554 Recipient address rejected: User unknown (state 14)." When I try to send an e-mail to the same folder, using the same e-mail address above ([email protected]), but with domain2.com instead of domain3.com, it works as intended (both internal & external). I have checked, double checked, and triple checked my DNS settings comparing those from domain2 & domain3 with them both appearing identical. I have tried recreating the folders in question with the same results. I have also ran Get-PublicFolderClientPermission "\Web Programs\folder" with the following results for user anonymous: RunspaceId : 5ff99653-a8c3-4619-8eeb-abc723dc908b Identity : \Web Programs\folder User : Anonymous AccessRights : {CreateItems} Domain2.com & Domain3.com are duplicates of each other, but only domain2.com works as intended. All other exchange functions are functioning properly. If anyone out there has any suggestions, I would love to hear them. I've just hit a brick wall. Thanks for all your help in advance! --Alex

    Read the article

  • Any way to bring my laptop battery back to life?

    - by Josh
    Recently my laptop battery will get extremely hot (definitely hotter than it should get) when I charge it. After that I usually end up removing it once it's fully charged to let it cool down, which takes a couple hours... Question is, is my battery dead? My last battery I had that died just ended up lasting 2 - 3 minutes on battery, no weird heat issues. And is there any way to possibly fix this? Probably not but I won't be able to get a replacement anytime soon. UPDATE: A few days ago when this happened and it cooled down, assuming it was fully charged, I ran my laptop on battery, and the battery life lasted about 10 minutes and then the laptop shutdown. I then plugged it in later and charged it back up, and for a while I had a orange light blinking on my laptop - which I assumed meant the battery was dead, especially since I got 10 minutes battery life. Then today, I turned my laptop on and was surprised to see that the battery was at 20% and charging (it's been plugged in since the incident above, so it should have been fully charged when I shut it off) I let it charge up, and as usual it got pretty hot around the time it was fully charged. So I turned my laptop off and pulled the battery out to let it cool down Now the thing is, just now I tried running it on battery, and it's been going for an hour now... so maybe its not dead? (also the orange light is no longer blinking...) Thanks in advance if anyone knows whats going on, and how to fix it, if its fixable =] EDIT: Some info if it helps... my laptop is about 2 years ago, and it's an Asus K50ID. I know laptop batteries usually don't last more than a year but I'm trying to keep this one going for as long as I can.

    Read the article

  • Acronis Disk Director AFTER Clone Disk error: PXE-E61: Media test failure, check cable

    - by Kairan
    Used Acronis Disk Director on my desktop, plugged in the laptop drive 240GB SSD (USB) and the new hard drive 500GB SSD (usb) and the copy seemed to be fine. I didnt see any error messages but I didnt stare at it for 3 hours either. The clone disk of course the Toshiba hidden restore partition, the primary partition C drive and the active (boot?) partition and yes, did check box for copy NT signature. The computer boots up fine most of the time, but it seems that when the computer goes to sleep (i believe its sleep, hard to do much testing during school) or hibernate or reboot it will sometimes display this message: Intel(R) Boot Agent GE v1.3.52 Copyright (C) 1997-2010, Intel Corporation PXE-E61: Media test failure, check cable PXE-M0F: Exiting Intel Boot Agent Insert system disk in drive. Press any key when ready... Of course any key does nothing but repeat a similar method. However, if I press the power button on the laptop (Toshiba Portege R705, Win 7 Pro 64-bit) it puts computer into hibernate. After hibernating I press power button again and it comes out of hibernation without any odd messages or problems described above... so apparently that is my TEMP fix. Another recent issue I noticed is on occasion when creating a new folder or modifying something in the system variables, other random areas I will get a message: "The Stub received bad data" and simply retry the task and it works. Perhaps these two issues are linked.

    Read the article

  • eee box "drobpox" server 24/7

    - by microspino
    I'd like to create a mini dropbox and print server on a small soho network of 5 users (all of them use windows XP desktops). The device need to run 24/7 or at least 12/7 (I can accept just workday hours too but the other two options would be better). Dropbox mini server: I mean I will have a 90gb dropbox on every computer on my network LAN syncing with It and the one onto It syncing to the web. Print Server: I have a Samsung A4 small laser printer, a HP500 Designjet Plotter, a Samsung Multifunction Machine (fax/print/scan/copy), a modern HP color A3 Deskjet printer and a HP laserjet A4 color printer. All of them need to be connected to this mini server. Fax/Scan server: since I have the above mentioned fax/print/scan/copy machine I would like to make people use It from/to their computers through the mini server. I thought to a recent EEEBOX machine because I heard good things about ATOM cpus and because It seems that a recent BIOS version could switch It off and on autonomously. I'd like to listen some advice from You. Best of all would be: - If You have something similar running for a long time - If You disagree with this hardware choice and If You would suggest some other device. - If You see any issues with my printing setup - Anything else ;) My budget is from Zero (using right sw to build something on top on a old PC) to 500€ max.

    Read the article

  • Why can`t we treat SSL Certs like Pgp keys instead of trusting CAs?

    - by yarun can
    I am dumb and stupid and I do not know all the technical aspects of SSL and server/client side implications and implementations. However I understand them good enough from user point of view to use SSL and encyrption daily. I was thinking that how silly it is to trust some unknown/known CAs when it comes to our our certificates for our servers. There had been many cases of misconduct, misuse, compromises and theft of certificates/ca keys from those places. On top of those known issues we also have to pay these guys regularly. I am wondering why can not we use/treat web server certificates like we use our pgp keys? So I sign a SSL certificate and send to a central server. And then each user accessing my site checks the validity and the keys from some central server (like pgp key servers). Is this a stupid idea? If so what could be a better idea than current system of issuing valid certificates. I am looking for a better than more secure idea. Naturally this is not a solution to an existing problem, rather it will be a hypothetical solution for some future implementation of a currently messed up web of trust on the internet due to recent news about NSA and their criminal buddies around the world. thanks

    Read the article

  • fast way to find network user computer on domain hogging all wan bandwidth

    - by dasko
    i have a network of about 40 domain users and i have huge latency wan issues, like 1400ms for google.com pings. I have noticed that the problem goes away after everyone goes home for the day. I would like to know if i should use something like a hub with wireshark on the router or modem to see if there are any irregular activity. I am open to suggestions but i need to isolate which user has the bug. I am assuming it is either downloads or someone spamming out heavily and not knowing. It would be best to trace to ip number so i can just look into dns and find the pc hostname with the problem? This is the first client i have this problem with so never really needed to address it before but not suprised as users don't actually listen to any best practices that we have suggested. Please help, thanks. just to update, pc's to routers and other computers have ping latency of 1ms so it is right after i hit the wan, using tracert to a web site (random), that i get the massive delay in the responses. As well this is a dsl line with 5mb down and 650kb up (maybe upload saturation?) thanks.

    Read the article

  • Amazon EC2 instance was not available for few minutes (amazon showed that everything ok)

    - by Salvador Dali
    Few minutes ago my amazon Ec2 instance was unavailable for a few minutes. During this time neither I was able to connect to web-site with http, nor I was able to ssh to it. Also I was not able to connect to my amazon management console for some time (less than amount of unavailability of my instance). When I was able to connect to management console, it was showing me that everything is running smoothly (but I still was not able to connect to instance in any way for a minute or two). During this time I have checked their status page just to see that there is no issues (my instance is in Ireland and there is nothing wrong there today). After that I was able to log in. I checked my logins with last to see that no one except me was logging in. I also looked in apache logs and there was no errors or warnings during this time. Right now when I see my amazon monitor, I see a small spike in CPU in last 15 minutes (but this is from 10% to like 20%) I have no idea what can it be (I have never experienced anything like this before) and therefore I have no idea how scared should I be or what else should I look for. Can anyone give me a hint what my actions should be in such situation?

    Read the article

  • Tuning Windows 7 for use in a VM

    - by intuited
    I'm running Windows 7 in a VirtualBox Virtual Machine, and would like to make it run in a more streamlined fashion. I'll be using the install primarily for testing web apps, and have no need for it to run quickly. I would like it to run with minimal memory requirements, and with minimal changes to its virtual hard drive's contents. Changes to the hard drive contents, for example the paging file, result in larger snapshot sizes. Another recent post of mine seems to be related to this issue, but does not directly address issues with Windows. One concern that I have is that Windows seems to be using 17% of its paging file even with over 900MB of memory marked "Standby" or "Free". My uneducated guess is that this is being used to store indexes or some other data that helps to speed up the system but is not really necessary. I'm also wondering if it's normal for Windows to use over 500 MB of "In Use" memory with no apps running. Will this amount decrease if I reduce the amount of "installed" memory in the VM? What steps can I take to reduce the system's memory footprint without incurring an increase in paging file usage?

    Read the article

  • Automatically Kill/Restart Process(es) When Memory is Critically Low

    - by nemesisfixx
    I have a Debian Wheezy VPS box where am running a couple of Django apps in production. Ideally, would have tried addressed my current memory footprint issues by optimizing the apps, adding more RAM or augmenting with Swap. But the problem is that I doubt there's much memory optimization I'd milk from optimizing the Django apps (the stack being open-source and robust), and adding RAM is a cost constraint for me (this is a remote VPS), also, the host doesn't offer options to use Swap! So, in the meantime (as I wait to secure more resources to afford more RAM), I wish to mitigate the scenarios where the server runs out memory so that I just have to request a VPS restart (as in, at that point, I can't even SSH into the box!). So, what I would love in a solution is the ability to detect when a process (or generally, total system memory usage) exceeds a certain critical amount (for now, example the FREE RAM falls to say 10%) - which I've noticed occurs after the VPS's been up for long, and when also traffic is suddenly much to some of the heavy apps (most are just staging apps anyway). So, I wish to be able to kill/restart the offending process(es) - most likely Apache. Which solution when done manually in these situations has restored sane memory usage levels - a hint that possibly one or more of the Django apps has a memory leak? In brief: Monitor overall system RAM usage When FREE RAM falls below a given critical threshold (say below 10%), kill/restart the offending process(es) - or simpler, if we assume from my current log analysis (using linux-dash) that Apache is often the offender, then kill/restart it. Rinse and repeat...

    Read the article

  • Improving abysmal 802.11n wireless network

    - by concept
    I am in desperate need of help to improve the abysmal performance of my 802.11n wireless network. At best I get 30Mbs (this is an internet download) from a technology that boasts 300Mbs, even worse is the LAN where to date best i have ever gotten is 1Mbs. It is literally quicker to copy the file to a USB and walk it to the other computer. Infrastructure is this AP 802.11n only broadcasting at both 2.4GHz and 5GHz Mac with 802.11a/b/g/n card is connected to the AP via 5GHz Linux with 802.11a/b/g/n card is connected to AP via 2.4GHz I have conducted the following tests (results at end of post) Internet based speed test wired and wireless LAN file copy wired and wireless I have read: http://nutsaboutnets.com/troubleshooting-wi-fi-problems/ http://www.smallnetbuilder.com/wireless/wireless-basics/30664-5-ways-to-fix-slow-80211n-- speed http colon //www.wi-fiplanet dot com/tutorials/7-tips-to-increase-wi-fi-performance.html Slow file transfer on network between two 802.11n laptops (connected directly together via access point) Wireless Network Performance Issues Slower than expected 802.11n wireless network speeds I have made the following optimizations AP broadcasts only 802.11n on both 2.4GHz and 5GHz frequencies 2.4GHz is on a channel with least interference (live in an apartment with lots of APs), this did make a 10Mb/sec improvement Our AP is the only one transmitting on the 5GHz freq. Security: WPA Personal WPA2 AES encryption Bandwidth: 20MHz / 40MHz (i assume this to be channel bonding) I have tried the following with 0 improvement Dropped the Fragment Threshold to 512 Dropped the Request To Send (RTS) Threshold to 512 and 1 Even thought of buying a frequency spectrum analyzer, until i saw the cost of them!!! Speed test results Linux Wired: DOWNLOAD 128.40Mb/s UPLOAD 10.62Mb/s www dot speedtest dot net/my-result/2948381853 Mac Wired: DOWNLOAD 118.02Mb/s UPLOAD 10.56Mb/s www dot speedtest dot net/my-result/2948384406 Linux Wireless: DOWNLOAD 23.99Mb/s UPLOAD 10.31Mb/s www.speedtest dot net/my-result/2948394990 Mac Wireless: DOWNLOAD 22.55Mb/s UPLOAD 10.36Mb/s www.speedtest dot net/my-result/2948396489 LAN NFS 53,345,087 bytes (51Mb) file Linux Mac NFS Wired: 65.6959 Mb/sec Linux Mac NFS Wireless: .9443 Mb/sec All help is appreciated, even testing methods will be accepted.

    Read the article

  • Headless VirtualBox VM NAT Network

    - by dirt
    I have a remote linux server accessible through SSH only. My goal is to host multiple Virtual Machines on this host server using VirtualBox. The host server has 1 IP address, so NAT will be used to route to the VMs for example 10022 will forward to server1:22 and 20022 will forward to server2:22. I have installed VirtualBox and copied a pre-configured CentOS VM to the host server. I start the VM, but cannot establish a connection to the server for example ssh -p 10022 127.0.0.1 times out. I've tried many things: Method 1: Copied existing .vdi, attached to new VM Method 2: Imported .Ova VM (thought it would help any MAC re-init issues?) NAT network type, tried natnet1 192.168/16 and 10.0/16 VBoxManage modifyvm "hermes.awoms.com" --natnet1 "192.168/16" Port forwarding with and without specifying VM ip in modifyvm --natpf1 command VBoxManage modifyvm "hermes" --natpf1 "guestssh,tcp,,10022,,,22" VBoxManage modifyvm "hermes" --natpf1 "guestssh,tcp,,10022,192.168.0.15,22" I can't see if VM is even booting (VBoxHeadless "hermes" --start & runs with no errors) I can't tell if VM is getting an IP address Is there anything else I can do to get more information from VirtualBox or the VM starting up when the only access I have is SSH?

    Read the article

  • BizTalk configuration broken following WCF hotfix installation

    - by Sir Crispalot
    I usually post over on StackOverflow, but thought this was probably better suited to ServerFault. Please migrate if I'm wrong! I am developing a WCF service and a BizTalk application on my workstation at the moment. As part of the WCF service, I had to install hotfix 971493 from Microsoft which updates some core WCF assemblies. Following installation of that hotfix, I am now experiencing severe issues in my existing BizTalk application. When I attempt to configure the properties of an existing WCF-Custom receive location, I get this error: Error loading properties (System.IO.FileLoadException) The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040) If I click OK (the same error repeats four times) I eventually see the WCF-Custom properties dialog. However if I click on the various tabs, I continue to receive errors: The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040) (Microsoft.BizTalk.Adapter.Wcf.Admin) The WCF-Custom receive location was working yesterday, and I installed the hotfix this morning. I'm guessing these two are related, and that BizTalk somehow has a reference to the old WCF assemblies. Does anyone know how I can fix this?

    Read the article

  • How to transfer Windows Vista disk image to new machine

    - by Mike Hobbs
    I'm trying to upgrade a user's machine to some better hardware. I know of Easy Transfer, but I'd rather not have to reinstall all the programs that are already present. (Some of which are no longer available, anyway). Instead, I'm trying to transfer the entire disk image from one machine to the other, but I ran into issues. If I copy the partition image over to the new machine using Clonezilla, I get errors on boot saying that I need to insert the Vista install disk and run repair. I do that, but it then says that it is unable to repair whatever it is that's broken. Next, I tried to sysprep the old machine before creating the image, but sysprep fails saying that it encountered some sort of system error. Should it be possible to sysprep any arbitrary machine, or does it only work on a relatively clean install? Could it be a missing driver that is tripping me up? The new machine is a fairly stock desktop that shouldn't need any special drivers beyond what's already present in standard Vista. Are there any foolproof methods for doing this sort of thing?

    Read the article

  • Only one domains not resolving via Windows DNS server at multiple locations, but is at others

    - by Brett G
    I'm having quite a weird issue. Had mail delivery issues to a specific domain. After looking closer, I realized that the DNS for that domain isn't resolving via the in-house Windows 2003 SP2 DNS server. C:\>nslookup foodmix.net Server: DC.DOMAIN.com Address: 10.1.1.1 DNS request timed out. timeout was 2 seconds. DNS request timed out. timeout was 2 seconds. *** Request to DC.DOMAIN.com timed-out (DC.DOMAIN.com and 10.1.1.1 are generic values to replace the actual ones) Even if I run this nslookup from the DC.DOMAIN.com server, I get the same result. However, all other requests are working as they should. I tried it on severs at completely separate organizations on different networks(Windows 2003 AD servers). The weird thing is some of these were having the same exact issue. However using public DNS servers work. I have tried clearing the DNS cache, restarting the server, restarting the services, etc. Nothing has worked. One weird event I noticed in the DNS Server Event Logs that might be related is an event ID of 5504 with the following description: The DNS server encountered an invalid domain name in a packet from 192.33.4.12. The packet will be rejected. The event data contains the DNS packet. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. In the data section below, I can see the following mentioned: ns2.webhostingstar.com Which happens to be the nameserver for the domain in question. Several discussion threads and a MS KB have pointed to disabling EDNS. I have done this via "dnscmd /config /enableednsprobes 0" and it has not fixed the issue.

    Read the article

  • 32 core (each physical core) 2.2 GhZ or 12 core (6 physical cores) 3.0GHZ?

    - by Tejaswi Rana
    I am working on a multithreaded application (Forex trading app built on C#) and had the client upgrade from the 12 core 3.0GHZ machine (Intel) to a 32 core 2.2 Ghz machine (AMD). The PassMark benchmark results were significantly higher when using multicores doing Integer, Floating and other calculations while for a single core calculation it was a bit slower than the pack (others that were being compared to with similar config as the 12 core one). Oh it also comes with 64 GB RAM (4 times as the other one) and a much faster SSD. So after configuring and running the application on that machine, not only did it not perform as well, it was significantly slower. We're talking about 30seconds - 1 minute slower on an app that usually completes processing within 5-20 secs. The application uses MAX DEGREE of PARALLELISM (TPL) which I've tried setting to number of cores and also half of that. I've also tried running single threaded and without setting any limits in parallel threading. While it may be the hardware has some issues, I am wondering if the CPU processing speed is the issue. I can overclock to 3.0 GHZ. But is that even a good idea? Server Info - AMD http://www.passmark.com/forum/showthread.php?4013-AMD-Dual-6272-performance-is-60-lower-than-benchmarks Seems that benchmark was wrong to start with - officially. Intel i7 3930k OS (same in both) Windows 7 Professional 64-bit

    Read the article

  • Networking Problem MrxSmb event 50 "Delayed Write Failed" errors occurring all of the sudden

    - by Johnny Musso
    JUST THIS MONTH, we have started getting reports from a number of very stable clients that MrxSmb event id 50 errors keep appearing in their system event logs. Otherwise, they do not appear to have any networking problems except that there is a critical legacy application which seems to either be generating the MrxSmb errors or having errors occur because of them. The legacy application is comprised of 16 bit and 32 bit code and has not been changed or recompiled in many years. It has always been stable on Windows XP systems. The customers that have the problem usually have a small (5 clients or less) peer to peer network with all Windows XP systems. All service packs are loaded on the XP machines. Note: The only thing that seems to correct the problem is disabling opportunistic locking. I don't like this solution because it seems to slow down the network and sometimes causes record locking issues between users (on some networks). Also, this seems to have just started happening - as if a Windows update for XP has caused it? However, I have removed recent updates and it did not correct the issue. Thanks in advance for any help you can provide.

    Read the article

  • Raid-5 Performance per spindle scaling

    - by Bill N.
    So I am stuck in a corner, I have a storage project that is limited to 24 spindles, and requires heavy random Write (the corresponding read side is purely sequential). Needs every bit of space on my Drives, ~13TB total in a n-1 raid-5, and has to go fast, over 2GB/s sort of fast. The obvious answer is to use a Stripe/Concat (Raid-0/1), or better yet a raid-10 in place of the raid-5, but that is disallowed for reasons beyond my control. So I am here asking for help in getting a sub optimal configuration to be as good as it can be. The array built on direct attached SAS-2 10K rpm drives, backed by a ARECA 18xx series controller with 4GB of cache. 64k array stripes and an 4K stripe aligned XFS File system, with 24 Allocation groups (to avoid some of the penalty for being raid 5). The heart of my question is this: In the same setup with 6 spindles/AG's I see a near disk limited performance on the write, ~100MB/s per spindle, at 12 spindles I see that drop to ~80MB/s and at 24 ~60MB/s. I would expect that with a distributed parity and matched AG's, the performance should scale with the # of spindles, or be worse at small spindle counts, but this array is doing the opposite. What am I missing ? Should Raid-5 performance scale with # of spindles ? Many thanks for your answers and any ideas, input, or guidance. --Bill Edit: Improving RAID performance The other relevant thread I was able to find, discusses some of the same issues in the answers, though it still leaves me with out an answer on the performance scaling.

    Read the article

  • .htaccess authorization requiring username/password for every resource

    - by webworm
    I am using Apache2 on Ubuntu and I have having some "weird" user authorization issues. I am using .htaccess to control access to my directories. I have many users and have grouped them into user groups which are defined in a "group" file. I then use .htaccess within each directory to define which users have access to the directory and which do not. Here is an example .htaccess file. AuthUserFile /var/local/.htpasswd AuthGroupFile /var/local/groups AuthName "Username and Password Required" AuthType Basic require group design admin Everything is working with one exception. I added a new user to one of my groups and though they can gain access to the directory they are prompted for a username and password for every resource (i.e. image, CSS). After a while I can just keep selecting "cancel" and I will get a page with just html with no images or CSS. I would think the browser would just cache the username/password. It seems to be working well for other users. Any thoughts?

    Read the article

  • .htaccess authorization requiring username/password for every resource

    - by webworm
    I am using Apache2 on Ubuntu and I have having some "weird" user authorization issues. I am using .htaccess to control access to my directories. I have many users and have grouped them into user groups which are defined in a "group" file. I then use .htaccess within each directory to define which users have access to the directory and which do not. Here is an example .htaccess file. AuthUserFile /var/local/.htpasswd AuthGroupFile /var/local/groups AuthName "Username and Password Required" AuthType Basic require group design admin Everything is working with one exception. I added a new user to one of my groups and though they can gain access to the directory they are prompted for a username and password for every resource (i.e. image, CSS). After a while I can just keep selecting "cancel" and I will get a page with just html with no images or CSS. I would think the browser would just cache the username/password. It seems to be working well for other users. Any thoughts?

    Read the article

  • Share Point ACL on OSX Lion Server - Posix group always takes over ACLs

    - by Ben
    Trying to configure a share point on a Lion Server machine. The directory is created by the local server admin (serveradmin) and has rwxr-x--- given to it. The serveradmin user belongs to the local staff group so serveradmin readwrite staff group read Others none We have an OD group for all the employees (Workers) . Using the Server tool we've given Full Control to the share point: Workers Full Control serveradmin readwrite staff group read Others none We would assume that Workers could then do what they want on the share but that doesn't seem to be the case. It appears the POSIX permissions take over the ACL permissions for Worker. If I change the staff permission to readwrite then the Workers can create a file or folder in the share point. I would think the ACL should take over but it doesn't, posix always win, rendering ACL useless. Furthermore if I leave the readwrite permission for staff and take Write permission away for the Workers group then the posix group still wins. Essentially the Workers ACL does absolutely nothing. There are reports of similar problems in this Apple forum thread: https://discussions.apple.com/thread/3722901 The directory nesting fix suggested there doesn't work for us. Has anyone had similar issues and know how to fix this? Edit: in Workgroup Manager the employees user are set to primary group staff and given the additional OD group Workers. Changing their primary group doesn't help, it only shifts the problem onto Others taking over rights (logically) Edit 2: Ok, this is interesting, adding OD Users to the share's ACL works totally fine

    Read the article

< Previous Page | 344 345 346 347 348 349 350 351 352 353 354 355  | Next Page >