Search Results

Search found 19155 results on 767 pages for 'url redirection'.

Page 348/767 | < Previous Page | 344 345 346 347 348 349 350 351 352 353 354 355  | Next Page >

• DrayTek 2820 configuration using public IP addresses

  - by Kev

  I have a /29 range of public IP addresses assigned to me by my ISP. I'm trying to configure a SIP VOIP handset to register with my VOIP provider who recommend using public IP addresses rather than NAT. I have a DrayTek 2820 router flashed with the latest firmware and have configured my router as per DrayTek's FAQ at: How do I use a public subnet on the LAN (non-NAT operation ) ? My IP range is: xx.xx.94.16 -> xx.xx.94.23 This gives a usable range of: xx.xx.94.17 -> xx.xx.94.22 My router's public IP address is: xx.xx.94.17, the SIP VOIP handset is allocated xx.xx.94.18. I have a second internet connection and via that I can ping the handset. However for some reason I can't seem to get it to register with the provider. I tried adding a new Firewall filter to pass through from WAN to LAN: Source: ANY, Destination: xx.xx.94.18, UDP - Ports 1024 -> 65535 Out of interest I also tried opening port 80 to see if I could browse to the phone's admin web interface but no joy. I know that my ISP aren't blocking inbound service ports because I NAT Port Forwarded port 80 to one of my internal web servers and it rendered a test page I had set up. All the NAT settings are reset to factory defaults, i.e. there are no Port Redirection, DMZ Host, Open Ports or Address Mappings configured. The handset I'm using is a GrandStream GXP-2000. Is there anything else I should be doing?

  Read the article

• EWS connect to ExchangeServer authentication specifications

  - by dankyy1

  Hi all I'm connecting to ExchangeServer with username,password,doain properities(my code below) but what how to define server uses Kerberos,ntlm or basic authentication e.g? thnx xchangeServiceBinding binding = new ExchangeServiceBinding(); ServicePointManager.ServerCertificateValidationCallback = CertificateValidationCallBack; System.Net.WebProxy proxyObject = new System.Net.WebProxy(); proxyObject.Credentials = System.Net.CredentialCache.DefaultCredentials; if (string.IsNullOrEmpty(credentials.UserName) || string.IsNullOrEmpty(credentials.Password) || string.IsNullOrEmpty(credentials.Domain)) throw new ArgumentNullException("The Crediantial values could not be null or empty."); binding.Credentials = new NetworkCredential(credentials.UserName, credentials.Password, credentials.Domain); if (string.IsNullOrEmpty(serverURL)) throw new ArgumentNullException("The Exchange server Url could not be null or empty."); binding.Url = serverURL; binding.UseDefaultCredentials = true; binding.Proxy = proxyObject; //TO DO:take version over parameter..or configration!! binding.RequestServerVersionValue = new RequestServerVersion(); binding.RequestServerVersionValue.Version = (ExchangeVersionType)Enum.Parse(typeof(ExchangeVersionType), serverVersion);// ExchangeVersionType.Exchange2007_SP1;//.Exchange2010;

  Read the article

• Jetty - 401 Unauthorized when using basic authentication

  - by JP.

  I am running SOLR on jetty in Ubuntu (a bitnami VM, if that helps) and am trying to lock down access to both the admin pages and the update/delete/etc. pages using basic authentication. When I attempt to connect to the admin console via a web browser I am prompted for a user name and password, but the username and password I use simply does not work. For test purposes I am using foo:bar as the credentials, but I receive a '401 Unauthorized' response. I see the following in my request log. 127.0.0.1 - - [10/Nov/2013:05:35:46 +0000] "GET /solr/ HTTP/1.1" 401 1376 Am I doing something wrong and/or is there anything obviously incorrect with the below configuration? Any help is greatly appreciated. Jetty.xml <Call name="addBean"> <Arg> <New class="org.eclipse.jetty.security.HashLoginService"> <Set name="name">solr</Set> <Set name="config"><SystemProperty name="jetty.home" default="."/>/etc/realm.properties</Set> <Set name="refreshInterval">5</Set> </New> </Arg> </Call> /etc/realm.properties foo: bar, solr_admin webdefault.xml <security-constraint> <web-resource-collection> <url-pattern>/</url-pattern> </web-resource-collection> <auth-constraint> <role-name>solr_admin</role-name> </auth-constraint> </security-constraint> <login-config> <auth-method>BASIC</auth-method> <realm-name>solr</realm-name> </login-config>

  Read the article

• Setting up ProxyPass for a Virtualmin virtual server

  - by Andy Ibanez

  I am trying to set up my web server so that I can server multiple Ghost.org blogs. I am stuck in one crucial step. To be honest, my knowledge in servers is not so big, so I request your help to do this. Basically, a tutorial I'm reading suggests I set up a VirtualHost in this way: NameVirtualHost *:80 <VirtualHost *:80> ServerName your-url.com ServerAlias www.your-url.com ProxyRequests off ProxyPass / http://127.0.0.1:2368/ ProxyPassReverse / http:/127.0.0.1:2368/ </VirtualHost> So I have gone to the Virtual site on Virtualmin to try to add everything as is. Services Configure Website Edit Directives The problem is, the previous page (Services Configure website) says I can't edit the port: This Apache virtual host belongs to the Virtualmin server linguist.andyibanez.com, so the address, port, base directory and hostname cannot be changed here. And whenever I try to add the ProxyRequests off (the other two can be added fine) directive in Edit Directives manually, I'm simply told that the directive can't be there. So what is the right way to "add" the last three directives in the VirtualHost above to my sub server? Maybe I'm missing a menu item that will help me with this? I request your help as I have looked for a while, Google keeps thinking I want to serve Webmin via Apache when I google "Set up Virtualmin proxypass", and I have no clue what to do.

  Read the article

• Unable to access Windows share

  - by mbnoimi

  I've installed Alfresco 4.2.d under Ubuntu 12.04 LTS; Everything done fine except I can't access it from Windows share although I got the link from Alfresco explorer which is: file:///%5C%5CECSA%5CAlfresco%5CSites%5Cswsdp%5CdocumentLibrary%5CAgency%20Files%5CImages%5Ccoins.JPG I tried to access it from: \\ECSA but I failed too so I made a ping (192.168.0.70 is server IP) then I got: C:\Users\user>ping 192.168.0.70 Pinging 192.168.0.70 with 32 bytes of data: Reply from 192.168.0.70: bytes=32 time<1ms TTL=64 Reply from 192.168.0.70: bytes=32 time<1ms TTL=64 Reply from 192.168.0.70: bytes=32 time<1ms TTL=64 Reply from 192.168.0.70: bytes=32 time<1ms TTL=64 Ping statistics for 192.168.0.70: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\Users\user>ping ECSA Ping request could not find host ECSA. Please check the name and try C:\Users\user> Some logs of what's going on: C:\Users\user>net view ECSA System error 1707 has occurred. The network address is invalid. C:\Users\user>nbtstat -a 192.168.0.70 Local Area Connection: Node IpAddress: [192.168.0.84] Scope Id: [] NetBIOS Remote Machine Name Table Name Type Status --------------------------------------------- ECSA <20> UNIQUE Registered ECSA <00> UNIQUE Registered WORKGROUP <00> GROUP Registered MAC Address = 00-00-00-00-00-00 C:\Users\user> CIFS Server Configuration in file-servers.properties ### CIFS Server Configuration - file-servers.properties ### cifs.enabled=true cifs.serverName=${localname}A cifs.domain= cifs.broadcast=255.255.255.255 cifs.bindto=192.168.0.70 cifs.ipv6.enabled=false cifs.hostannounce=true cifs.disableNIO=false cifs.disableNativeCode=false cifs.sessionTimeout=900 cifs.maximumVirtualCircuitsPerSession=16 cifs.tcpipSMB.port=445 cifs.netBIOSSMB.sessionPort=139 cifs.netBIOSSMB.namePort=137 cifs.netBIOSSMB.datagramPort=138 cifs.WINS.autoDetectEnabled=true cifs.WINS.primary=192.168.0.70 cifs.WINS.secondary=192.168.0.1 cifs.sessionDebug= cifs.pseudoFiles.enabled=true cifs.pseudoFiles.explorerURL.enabled=true cifs.pseudoFiles.explorerURL.fileName=__Alfresco.url cifs.pseudoFiles.shareURL.enabled=false cifs.pseudoFiles.shareURL.fileName=__Share.url How can I fix this issue?

  Read the article

• phpBB configuration problem under Nginx

  - by zvikico

  Hi, I have a phpBB site running with Nginx (PHP via FastCGI). It works OK. However, some specific actions like moving or deleting a topic fail. Instead, I'm redirected to the forum index. I think it is a problem with the URLs redirection or rewriting. My rewrite rule looks like this: if (!-e $request_filename) { rewrite ^/(.*)$ /index.php?q=$1 last; break; } Any help would be appreciated. My full configuration file is: server { listen 80; server_name forum.xxxxx.com; access_log /xxxxx/access.log; error_log /xxxxx/error.log; location = / { root /xxxxx/phpBB3/; index index.php; } location / { root /xxxxx/phpBB3/; index index.php index.html; if (!-e $request_filename) { rewrite ^/(.*)$ /index.php?q=$1 last; break; } } error_page 404 /index.php; error_page 403 /index.php; error_page 500 502 503 504 /index.php; # serve static files directly location ~* ^.+\.(jpg|jpeg|gif|css|png|js|ico)$ { access_log off; expires 30d; root /xxxxx/phpBB3/; break; } # hide protected files location ~* \.(engine|inc|info|install|module|profile|po|sh|.*sql|theme|tpl(\.php)?|xtmpl)$|^(code-style\.pl|Entries.*|Repository|Root|Tag|Template)$ { deny all; } location ~ \.php$ { fastcgi_pass 127.0.0.1:8888; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /xxxxx/phpBB3/$fastcgi_script_name; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; } }

  Read the article

• IIS 7.0 404 Custom Error Page and web.config

  - by Colin

  I am having trouble with a custom 404 error page. I have a domain running a .NET proj with it's own error handling. I have a web.config running for the domain which contains: <customErrors mode="RemoteOnly"> <error statusCode="500" redirect="/Error"/> <error statusCode="404" redirect="/404"/> </customErrors> On a sub dir of that domain I am ignoring all routes there by doing routes.IgnoreRoute("Assets/{*pathInfo}"); in the .NET proj and I want to put a custom 404 error page on that and any sub dir's of Assets. The sub dir contains static content like images, css, js etc etc. So in the Error Pages section of IIS I put a redirect to an absolute URL. The web.config for that dir looks like the following: <system.webServer> <httpErrors> <remove statusCode="404" subStatusCode="-1" /> <error statusCode="404" prefixLanguageFilePath="" path="http://mydomain.com/404" responseMode="Redirect" /> </httpErrors> </system.webServer> But I navigate to an unknown URL under that dir and yet I still see the default IIS 404 page. I am also seeing an alert in IIS that reads: You have configured detailed error messages to be returned for both local and remote requests. When this option is selected, custom error configuration is not used. Does this have anything to do with the customErrors mode="RemoteOnly" in the site web.config? I have tried to overwrite the customErrors in the sub dir web.config but nothing changes. Any help would be appreciated. Thanks.

  Read the article

• How do I add additional parameters to query string of a Firefox Search Plugin?

  - by Goto10

  I have just installed the DuckDuckGo add-on in Firefox 11.0, running on XP SP 3. I would like to add additional parameters to the query string. However, any changes I make are not reflected in the query string when doing a search. I found the duckduckgo.xml file at C:\Documents and Settings\User Name\Application Data\Mozilla\Firefox\Profiles\Profile Name.default\searchplugins. I opened it up with Notepad++ and added the line for kl=uk-en: <SearchPlugin xmlns="http://www.mozilla.org/2006/browser/search/" xmlns:os="http://a9.com/-/spec/opensearch/1.1/"> <os:ShortName>DuckDuckGo</os:ShortName> <os:Description>Search DuckDuckGo (SSL)</os:Description> <os:InputEncoding>UTF-8</os:InputEncoding> <os:Image width="16" height="16">data:image/x-icon;base64, -Removed to shorten-</os:Image> <os:Url type="text/html" method="GET" template="https://duckduckgo.com/"> <os:Param name="q" value="{searchTerms}"/> <os:Param name="kl" value="uk-en"/> </os:Url> </SearchPlugin> However, the kl=uk-en parameter does not appear in the query string when searching (despite several Firefox restarts).

  Read the article

• Integration of SharePoint 2010 with TFS2010

  - by Kabir Rao

  We have performed following steps as of now- Install TFS2010 10.0.30319.1 (RTM) on Windows Server 2008 R2 Enterprise(app tier) SQL 2008 SP1 with Cumulative update 2 on Windows Server 2008 R2 Enterprise(data tier) Reporting Service is installed on app tier. After this installation worked fine we installed SharePoint 2010 on app tier. After installation we followed http://blogs.msdn.com/b/team_foundation/archive/2010/03/06/configuring-sharepoint-server-2010-beta-for-dashboard-compatibility-with-tfs-2010-beta2-rc.aspx for configuration. We are not able to perform the last step described in the link as following error occured- TF249063: The following Web service is not available: http://apptier:31254/_vti_bin/TeamFoundationIntegrationService.asmx. This Web service is used for the Team Foundation Server Extensions for SharePoint Products. The underlying error is: The remote server returned an error: (404) Not Found.. Verify that the following URL points to a valid SharePoint Web application and that the application is available: http://apptier:31254. If the URL is correct and the Web application is operating normally, verify that a firewall is not blocking access to the Web application. We have also noticed that Document Folder in Team project also have red x. Please help. Thanks upfront.

  Read the article

• Blocking requests from specific IPs using IIS Rewrite module

  - by Thomas Levesque

  I'm trying to block a range of IP that is sending tons of spam to my blog. I can't use the solution described here because it's a shared hosting and I can't change anything to the server configuration. I only have access to a few options in Remote IIS. I see that the URL Rewrite module has an option to block requests, so I tried to use it. My rule is as follows in web.config: <rule name="BlockSpam" enabled="true" stopProcessing="true"> <match url=".*" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{REMOTE_ADDR}" pattern="10\.0\.146\.23[0-9]" ignoreCase="false" /> </conditions> <action type="CustomResponse" statusCode="403" /> </rule> Unfortunately, if I put it at the end of the rewrite rules, it doesn't seem to block anything... and if I put it at the start of the list, it blocks everything! It looks like the condition isn't taken into account. In the UI, the stopProcessing option is not visible and is true by default. Changing it to false in web.config doesn't seem to have any effect. I'm not sure what to do now... any ideas?

  Read the article

• Cant connect to MySQL server from Java application

  - by RN

  This is on VPS\Centos server. The MySQL server is pre configured. I am running the Java application on Tomcat My Java web application is not able to connect to the MySQL server. I get an error - "Caused by: java.net.ConnectException: Connection refused" I suspect this to be a configuration problem rather than a coding problem- hence I have posted this on ServerFault And yes, The same web-app is able to connect to MySQL on a different linux box This is the URL that I provided to my Java application (note- it assumes default port) url = "jdbc:mysql://localhost/pickupgames" My first suspicion was that I am running on a non-default port So I tried to find the port where mySQL server is running I tried every trick mentioned in http://serverfault.com/questions/116100/how-to-check-what-port-mysql-is-running-on But no luck ! SHOW GLOBAL VARIABLES LIKE 'PORT'; This shows port 0 netstat -tlnp doesn't show mysql at all /etc/my.cnf It has no port entry telnet localhost 3306 Doesn't connect And in case you are wondering if mysql server is running at all or not It is And I know for sure, because I have been able to login using the mysql command Also # ps -ef|grep 'mysql' root 31839 27662 0 00:49 pts/3 00:00:00 grep mysql root 32452 1 0 Apr02 ? 00:00:00 /bin/sh /usr/bin/mysqld_safe --skip-grant-tables --skip-networking mysql 32504 32452 0 Apr02 ? 00:00:06 /usr/libexec/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/mysqld/mysqld.pid --skip-external-locking --socket=/var/lib/mysql/mysql.sock --skip-grant-tables --skip-networking Please note the --skip-networking parameter Does this have something to do with the issue ? Any explanation why I cant connect to mysql server on port 3306 by telnet? Or why it docent show up under netstat? Any suggestion on whet I should try next ?

  Read the article

• How to bypass firewall to connect to a proxy server?

  - by Bruce

  I am conducting a small experiment on my office network. I have setup a proxy server on my desktop machine (connected to my LAN) and I have volunteers access the internet via my proxy server. Everything is working well. The problem is people cannot connect to the proxy server through their laptops. I asked my network admin and he said the wireless network has a firewall which prevents users from connecting to my proxy. He said I could tunnel the traffic or use SSH though. I am afraid I do not understand fully what is going on. Is there a way by which users connected on the wireless network can connect to my desktop? I am using FreeProxy on Windows as my proxy server: http://www.handcraftedsoftware.org/index.php?page=download FreeProxy allows me to create a SOCKS 4/4a/5 proxy. Is that what I need? Part of the experiment involves logging the URL requests of the users. I am doing a measurement study. So, any solution must allow me to log the URL requests of users. Also, what changes do I need to make in the browser configuration.

  Read the article

• Server appears to have lost ability to read PHP files with LAMP

  - by OtagoHarbour

  I have LAMP installed on a PC that is running Ubuntu 11.10. LAMP was running fine but I had to restart the PC because Unity was messing up (as it often does) and the tool bar had disappeared. When it started up, I was unable to fire up any php files. I have a file index.php in /var/www. It is owned by www-data as is the directory that it is in. The LAN address of the server is 192.168.1.10. However when I type 192.168.1.10 into the URL box on Mozilla FireFox, I get Unable to connect Firefox can't establish a connection to the server at 192.168.1.10 This server is connected to another server on the LAN that has the LAN address 192.168.1.4. When I type 192.168.1.4 into the Firefow URL box on 192.168.1.10, I see the display associated with index.php on 192.168.1.4. Why can it not display its own /var/www/index.php? Any assistance with this would be greatly appreciated, Peter.

  Read the article

• Dual Monitor support rdp 7 to win 7 on esxi

  - by rphilli5

  I am trying to RDP from a Windows 7 Professional dual monitor physical machine to a Windows 7 Professional VM hosted on esxi 4.0. I can get the spanning option to work to both monitors, but I have tried 3 different methods of connecting but have not been able to use true multiple monitors. At different times, I tried checking the "use all monitors" option, command line mstsc /multimon and added the line use multimon:i:1 to the .rdp file. None of these worked. Any ideas? The physical machine can connect to other Windows 7 physical machines with true multi monitor access. I also have the same issue when going from a 32bit RC1 machine to a Windows 7 Professional x64, but not when going in the reverse direction. Here's the .rdp: screen mode id:i:2 use multimon:i:1 desktopwidth:i:1440 desktopheight:i:900 session bpp:i:16 winposstr:s:0,1,341,118,1139,568 compression:i:1 keyboardhook:i:2 audiocapturemode:i:0 videoplaybackmode:i:1 connection type:i:1 displayconnectionbar:i:1 disable wallpaper:i:1 allow font smoothing:i:0 allow desktop composition:i:0 disable full window drag:i:1 disable menu anims:i:1 disable themes:i:1 disable cursor setting:i:0 bitmapcachepersistenable:i:1 full address:s:192.168.1.5 audiomode:i:0 redirectprinters:i:1 redirectcomports:i:0 redirectsmartcards:i:1 redirectclipboard:i:1 redirectposdevices:i:0 redirectdirectx:i:1 autoreconnection enabled:i:1 authentication level:i:2 prompt for credentials:i:0 negotiate security layer:i:1 remoteapplicationmode:i:0 alternate shell:s: shell working directory:s: gatewayhostname:s: gatewayusagemethod:i:4 gatewaycredentialssource:i:4 gatewayprofileusagemethod:i:0 promptcredentialonce:i:1 use redirection server name:i:0 drivestoredirect:s:

  Read the article

• jboss 5.1 mysql connection pooling

  - by boyd4715

  I am using JBOSS 5.1.0.GA, MySQL 5.5 and Hibernate 3.3.1 GA (included with JBOSS) + Spring. My question is do I need to add c3p0 as a data source in my spring/hibernate configuration for connection pooling or are the setting in the JBOSS mysql-ds.xml setting enough. My mysql-ds.xml is the following: <datasources> <local-tx-datasource> <jndi-name>MySqlDS</jndi-name> <connection-url>jdbc:mysql://localhost:3306/ecotrak</connection-url> <driver-class>com.mysql.jdbc.Driver</driver-class> <user-name>ecotrak</user-name> <password>ecotrak</password> <min-pool-size>5</min-pool-size> <max-pool-size>20</max-pool-size> <idle-timeout-minutes>5</idle-timeout-minutes> <exception-sorter-class-name>org.jboss.resource.adapter.jdbc.vendor.MySQLExceptionSorter</exception-sorter-class-name> <!-- should only be used on drivers after 3.22.1 with "ping" support --> <valid-connection-checker-class-name>org.jboss.resource.adapter.jdbc.vendor.MySQLValidConnectionChecker</valid-connection-checker-class-name> <!-- sql to call when connection is created <new-connection-sql>some arbitrary sql</new-connection-sql> --> <!-- sql to call on an existing pooled connection when it is obtained from pool - MySQLValidConnectionChecker is preferred for newer drivers <check-valid-connection-sql>some arbitrary sql</check-valid-connection-sql> --> <!-- corresponding type-mapping in the standardjbosscmp-jdbc.xml (optional) --> <metadata> <type-mapping>mySQL</type-mapping> </metadata> </local-tx-datasource> </datasources>

  Read the article

• Could this server log mean my server is being used as a proxy?

  - by So Over It

  I came across the following entry in my access.log: 58.218.199.147 - - [05/Jun/2012:12:56:04 +1000] "GET http://proxyproxys.com/ HTTP/1.1" 200 183 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)" Normally when I see a full URL entry in my access.log I assume it is log spam with people trying to get me to access their site. These entries are normally followed with a 404 response. The above entry is followed with a 200 'success' response! Doing some searching it would seem that this can occur when someone is trying to use your server as a proxy. This disturbed me more - especially because the URL in question has the word proxy in it. Going to the site 'proxyproxys.com' (using hidemyass.com to protect my own identity), the site returns what appears to be some sort of 'proxy judge' ---------------------------------------- HTTP_ACCEPT=text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 HTTP_ACCEPT_LANGUAGE=en-US,en;q=0.8 HTTP_USER_AGENT=Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_4) AppleWebKit/536.5 (KHTML, like Gecko) Chrome/19.0.1084.53 Safari/536.5 HTTP_CONNECTION=close REMOTE_PORT=56355 REMOTE_HOST=74.63.112.142 REMOTE_ADDR=74.63.112.142 ---------------------------------------- CS_ProxyJudge Result=HIGH_ANONYMITY ---------------------------------------- Question: 1) does the 200 success mean that someone has been able to successfully use my server as a proxy? 2) are there other means of confirming if my server is being used as a proxy 3) can you refer me to documentation to help 'close up' my security gap if there is one. Thanks.

  Read the article

• IIS Messing on Wordpress Permalinks or WP's fault?

  - by Jesus Rodriguez

  Hello, I had a problem and after some research I discovered the exactly point where is failing. blog.domain.com Is not working, it says that the page cannot be found (404) blog.domain.com/index.php Working as expected If you click on Home, it will says that the page cannot be found, if you try to preview a new post, it says that the page cannot be found... I can see every post btw. I run my blog on a Windows hosting using IIS. my permalink is this: /index.php/%postname% IIRC I had to use index.php because my IIS doesn't have URL rewriting. I have no problem with the index.php thing on the url, I have now a good SEO and I don't want to change my permalink but I Don't know why is not working now... just from one day to the next... It's a problem of WP or is just my host messing up? If is my blog, do you know what is causing this? (Just for create a concrete ticket about the exactly problem) Thank you.

  Read the article

• Moving automatically spam messages to a folder in Postfix

  - by cad

  Hi My problem is that I want to automatically to move spam messages to a folder and not sure how. I have a linux box giving email access. MTA is Postfix, IMAP is Courier. As webmail client I use Squirrelmail. To filter SPAM I use Spamassassin and is working ok. Spamassasin is overwriting subjects with [--- SPAM 14.3 ---] Viagra... Also is adding headers: X-Spam-Flag: YES X-Spam-Checker-Version: SpamAssassin 3.2.5 (2008-06-10) on xxxx X-Spam-Level: ************** X-Spam-Status: Yes, score=14.3 required=2.0 tests=BAYES_99, DATE_IN_FUTURE_24_48,HTML_MESSAGE,MIME_HTML_ONLY,RCVD_IN_PBL, RCVD_IN_SORBS_WEB,RCVD_IN_XBL,RDNS_NONE,URIBL_RED,URIBL_SBL autolearn=no version=3.2.5 X-Spam-Report: * 0.0 URIBL_RED Contains an URL listed in the URIBL redlist * [URIs: myimg.de] * 3.5 BAYES_99 BODY: Bayesian spam probability is 99 to 100% * [score: 1.0000] * 0.9 RCVD_IN_PBL RBL: Received via a relay in Spamhaus PBL * [113.170.131.234 listed in zen.spamhaus.org] * 3.0 RCVD_IN_XBL RBL: Received via a relay in Spamhaus XBL * 0.6 RCVD_IN_SORBS_WEB RBL: SORBS: sender is a abuseable web server * [113.170.131.234 listed in dnsbl.sorbs.net] * 3.2 DATE_IN_FUTURE_24_48 Date: is 24 to 48 hours after Received: date * 0.0 HTML_MESSAGE BODY: HTML included in message * 1.5 MIME_HTML_ONLY BODY: Message only has text/html MIME parts * 1.5 URIBL_SBL Contains an URL listed in the SBL blocklist * [URIs: myimg.de] * 0.1 RDNS_NONE Delivered to trusted network by a host with no rDNS I want to automatically to move spam messages to a folder. Ideally (not sure if possible) only to move messages with puntuation 5.0 or more to folder.. spam between 2.0 and 5.0 I want to be stored in Inbox. (I plan later to switch autolearn on) After reading a lot in procmail, postfix and spamassasin sites and googling a lot (lot of outdated howtos) I found two solutions but not sure which is the best or if there is another one: Put a rule in squirrelmail (dirty solution?) Use Procmail Which is the best option? Do you have any updated howto about it? Thanks

  Read the article

• Apache2 with lighttpd as proxy

  - by andrzejp

  Hi, I am using apache2 as web server. I would like to help him lighttpd as a proxy for static content. Unfortunately I can not well set up lighttpd and apache2. (OS: Debian) Important things from lighttpd.config: server.modules = ( "mod_access", "mod_alias", "mod_accesslog", "mod_proxy", "mod_status", ) server.document-root = "/www/" server.port = 82 server.bind = "localhost" $HTTP["remoteip"] =~ "127.0.0.1" { alias.url += ( "/doc/" => "/usr/share/doc/", "/images/" => "/usr/share/images/" ) $HTTP["url"] =~ "^/doc/|^/images/" { dir-listing.activate = "enable" } } I would like to use lighttpd in only one site operating as a virtual directory on apache2. Configuration of this virtual directory: ProxyRequests Off ProxyPreserveHost On ProxyPass /images http://0.0.0.0:82/ ProxyPass /imagehosting http://0.0.0.0:82/ ProxyPass /pictures http://0.0.0.0:82/ ProxyPassReverse / http://0.0.0.0:82/ ServerName MY_VALUES ServerAlias www.MY_VALUES UseCanonicalName Off DocumentRoot /www/MYAPP/forum <Directory "/www/MYAPP/forum"> DirectoryIndex index.htm index.php AllowOverride None ... As you can see (or not;)) my service is physically located at the path: / www / myapp / forum and I would like to support lighttpd dealt with folders: / www / myapp / forum / images / www / myapp / forum / imagehosting / www / myapp / forum / pictures and left the rest (PHP scripts) for apache After running lighttpd and apache2 working party, but did not show up any images of these locations. What is wrong?

  Read the article

• How to fix subfolders IIS7 functionality?

  - by Amr ElGarhy

  I have a problem in my sharing hosting that all websites in subfolders, their URL appear like this: http://amrelgarhy.com/amrelgarhy/ I sent to godaddy, and they sent me that its because of IIS7 and they can't solve, any one can tell me how to fix that? Here what i sent to godaddy and their reply: "as i saw before on this page http://www.godaddy.com/gdshop/hosting/shared.asp?ci=9009 compare windows plans, "Multiple Web sites: unlimited" so i have the right to run more than one website inside my hosting. But what i am facing now that i can't make more than website as a primary website. I have igurr.com as a primary website, i want to make others as primary because: I am facing a problem that all home pages for the other websites "which physically in sub folders" are like that "http://amrelgarhy.com/amrelgarhy/" the URL + the folder name and that what i don't want." GODADDY "Thank you for contacting Hosting Support. The behavior you are describing is standard for IIS 7.0 accounts. All alias domains in this environment will append the foldername their located in. I.E. a an alias domain www.coolexample.com pointed to the '/example' directory will display in a browser as "www.coolexample.com/example". This is due to the way IIS 7.0 handles virtual directories. Unfortunately we do not have any direct work around for this. We apologize for any inconvenience this may cause. "

  Read the article

• Using NginX and Apache alongside for both static and dynamic files

  - by faridv

  Background: I've searched a lot and found these useful threads about using of Apache or NginX for static or dynamic files. But they are old (mostly about 1 or 2 years ago) and I think both webservers, specifically Nginx has had important changes in performance and usage. So I think take another look on these issue cannot be that bad. Nginx (for static files) and Apache (for dynamic content)? nginx better than apache for dynamic content? [closed] Apache or NGINX for PHP? Nginx as reverse proxy to Apache with only dynamic content? My question: I have a PHP web application with lots of dynamic files and lots of static contents (videos, images etc.) and it's currently running on a CentOS 6 server and Apache 2.2 since 2 months ago. In past few days, number of our site visitors have gained so fast and I just thought if this number continues to increase with current ratio, we need to change many things (web server, application, etc.) to prevent failures. Because of hardware limitations that we are facing, I thought that it's best for us to start with web server. Should I start with something else? Should I try to increase performance of my PHP application and forget about web server for now? (even if gonna take a long time!) Because of huge usage of .htaccess files (for redirection, rewrites, etc.), I think it's gonna be painful to migrate to NginX as default web server or maybe only for dynamic files. Does this mean that I can't even use Nginx as reverse proxy? I'm not sure latest stable version of NginX and PHP-FPM have a better performance over my current Apache and my limitations (too many things) won't let me to give it a try. Which one is doing better currently? What will I lose by migrating to Nginx? To make it short, what should I do?

  Read the article

• nginx not serving admin static files?

  - by toto_tico

  First, I want to clarify that this error is just for the admin static files. This means my problem is specific just to the static files that corresponds to the Django admin. The rest of the static files are working perfect. Basically my problem is that for some reason I cannot access those admin static files with the ngix server. It works perfect with the micro server of Django and the collect static is doing its job. This means it is putting the files on the expected place in the static folder. The urls are correct but I cannot even access the admin static files directly, but the others I can. So, for example, I am able to access this url (copying it in the browser): myserver.com:8080/static/css/base/base.css but i am not able to access this other url (copying it in the browser): myserver.com:8080/static/admin/css/admin.css I also tried to copy the admin/ directory structure into other_admin_directory_name/. Then I can access myserver.com:8080/static/other_admin_directory_name/css/admin.css Then, it works. So, I checked permissions and everything is fine. I tried to change ADMIN_MEDIA_PREFIX = '/static/admin/' to ADMIN_MEDIA_PREFIX = '/static/other_admin_directory_name/', it doesn't work. This a mistery in itself that I am exploring but still no luck. Finally, and it seems to be an important clue: I tried to copy the admin/ directory structure into admin_and_then_any_suffix/. Then I cannot access myserver.com:8080/static/admin_and_then_any_suffix//css/admin.css So, if the name of the directory starts with admin (for example administration or admin2) it doesn't work. * added thanks to sarnold observation ** the problem seems to be in the nginx configuration file /etc/nginx/sites-available/mysite location /static/admin { alias /home/vl3/.virtualenvs/vl3/lib/python2.7/site-packages/django/contrib/admin/media/; }

  Read the article

• mod_rewrite "Request exceeded the limit of 10 internal redirects due to probable configuration error."

  - by Shoaibi

  What i want: Force www [works] Restrict access to .inc.php [works] Force redirection of abc.php to /abc/ Removal of extension from url Add a trailing slash if needed old .htaccess : Options +FollowSymLinks <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / ### Force www RewriteCond %{HTTP_HOST} ^example\.net$ RewriteRule ^(.*)$ http://www\.example\.net/$1 [L,R=301] ### Restrict access RewriteCond %{REQUEST_URI} ^/(.*)\.inc\.php$ [NC] RewriteRule .* - [F,L] #### Remove extension: RewriteRule ^(.*)/$ /$1.php [L,R=301] ######### Trailing slash: RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_URI} !(.*)/$ RewriteRule ^(.*)$ http://www.example.net/$1/ [R=301,L] </IfModule> New .htaccess: Options +FollowSymLinks <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / ### Force www RewriteCond %{HTTP_HOST} ^example\.net$ RewriteRule ^(.*)$ http://www\.example\.net/$1 [L,R=301] ### Restrict access RewriteCond %{REQUEST_URI} ^/(.*)\.inc\.php$ [NC] RewriteRule .* - [F,L] #### Remove extension: RewriteCond %{REQUEST_FILENAME} \.php$ RewriteCond %{REQUEST_FILENAME} -f RewriteRule (.*)\.php$ /$1/ [L,R=301] #### Map pseudo-directory to PHP file RewriteCond %{REQUEST_FILENAME}\.php -f RewriteRule (.*) /$1.php [L] ######### Trailing slash: RewriteCond %{REQUEST_FILENAME} -d RewriteCond %{REQUEST_FILENAME} !/$ RewriteRule (.*) $1/ [L,R=301] </IfModule> errorlog: Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace., referer: http://www.example.net/ Rewrite.log: http://pastebin.com/x5PKeJHB

  Read the article

• Microsoft Web Farm Framework 502 error

  - by hermiod

  My apologies if this is a really stupid question, but I have installed and set up the new Microsoft Web Farm Framework in a UAT environment with a controller machine, a primary, and a secondary server. I have installed one of our in-house applications on to the primary server and it has been successfully provisioned across to the secondary. I have tried accessing the server via the url http:\mis-uat-002\testfarm\reviewer where mis-uat-002 is the name of the farm controller, testfarm is the name of the farm, and reviewer is the name of the application. When using this url I get a "502 - Web server received an invalid response while acting as a gateway or proxy server." error. If I access the application directly via http:\mis-uat-003\reviewer (mis-uat-003 is the primary farm server, reviewer is the application) then it works no problem. Is there some additional set up that needs to be done in order for the farm controller to do its job? It should be noted that this is a UAT environment so is not on a domain of any sort. However, if this was successful and the WFF came out with V1.0 fairly soon, we would be looking to run this on a Windows 2008 domain.

  Read the article

• Win7 Domain User Profile- Desktop Icon management best practices request

  - by Doltknuckle

  Here's the situation: We have a large (5,000+ user) organization that is currently using folder redirection to manage the windows desktop icons. This folder is redirected to a network share where we can centrally manage the different sites and such. When a user tries to use a computer when the network is not available, they are unable to use any shortcuts in the Public folder. We only redirect the C:\Users\%username%\Desktop folder. Does anyone have any suggestions of how to go about managing desktop icons? We still want a central location to manage these items, but find a way to keep the system working when the network is unavailable. As a point of clarification, the network rarely goes down. We do have instances where a few computers do not have a network connection. Usually, something is simply unplugged. Since we have multiple sites, the line from a branch to the central office has gone down a few times. This is more of an attempt to maintain a positive end user experience when disconnected from the network.

  Read the article

< Previous Page | 344 345 346 347 348 349 350 351 352 353 354 355  | Next Page >