Search Results

Search found 17610 results on 705 pages for 'c (specific)'.

Page 349/705 | < Previous Page | 345 346 347 348 349 350 351 352 353 354 355 356  | Next Page >

• Subdomain still times out after being set up a month ago

  - by user8137

  I would like to use the subdomain www.high-res.domain.com to be accessed by external customers with specific permissions to access the site (like FTP). We use Network Solutions to house domain.com. We recently added a new IP address to point to www.high-res.domain.com. I gave the IP address to the company that hosts our website. I pinged www.high-res.domain.com and it points to the correct IP address but still times out. It’s been a few weeks now and when you ping it, it still times out. C:\>ping XXX.XXX.X.XXX Pinging XXX.XXX.X.XXX with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for XXX.XXX.X.XXX: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss). tracert times out as well. I even went to DNS tools and a few other sites for checking this and it shows the same thing. I recently went into the DNSmgmt on our server (wink2k3sp1) and created an A record under the DomainDnsZones which translated to a CNAME when you look at it. Under the domain it has two entries, one to the subdomain and the other to the website host. Each has separate IP addresses. Is this correct?

  Read the article

• How to send connection type (SSH|Telnet) info in Radius Access Requests on Cisco router?

  - by Gianni Costanzi

  I've configured the following on a cisco router: aaa authentication login default group radius local ! radius-server host x.x.x.x auth-port 1012 acct-port 1013 radius-server host y.y.y.y auth-port 1012 acct-port 1013 radius-server retransmit 1 radius-server timeout 3 radius-server key 7 xxxxxxxxx I'd like to be able to specify some radius options in order to add information about the type of connection for which a user is being authenticated, i.e. I'd like the radius server to receive in the Cisco Router's Radius Access Request information about the connection being SSH or Telnet.. I'd like to find something that automatically adds this info in the access request, without specific configurations on VTY lines dedicated to SSH and to Telnet. Any idea about that?

  Read the article

• SPUtility.SendMail and the 2048 Character Limit

  - by Damon

  We were in the middle of testing a web part responsible for gathering information from visitors to our Client's website and emailing it to someone responsible for responding to the request.  During testing, however, it was brought to our attention that the message was cutting off at 2048 characters.  Now, 2048 is one of those numbers that is usually indicative of some computational limit, but I was hopeful that Microsoft had thought through the possibility of emailing more than 2048 characters from SharePoint.  Luckily I was right. and wrong. As it turns out, SPUtility.SendMail is not limited to any specific character limit as far as I can tell.  However, each LINE of text that you send via SendMail cannot exceed 2048 characters.  Since we were sending an HTML email it was constructed entirely without line breaks, far exceeding the 2048 character limit and ultimately helping to educate me about this obscure technical limitation whose only benefit thus far is offering me something to rant about on my blog.  The fix is simple, just put in a carriage return and a line break often enough to avoid going past the 2048 character limit.  I'm sure someone can present a great technical reason for the 2048 character limit, but it seems fairly arbitrary since the "\r\n" that got appended to the string are ultimately just characters too.

  Read the article

• What features are helpful when performing remote debugging / diagnostics?

  - by Pemdas

  Obviously, the easiest way to solve a bug is to be able to reproduce it in-house. However, sometimes that is not practical. For starters, users are often not very good at providing you with useful information. Customer Service: "what seems to be the issue?" User: "It crashed!" To further compound that, sometimes the bug only occurs under certain environmentally conditions that can not be adequately replicated in-house. With that in mind, it is important to build some sort of diagnostic framework into your product. What types of built-in diagnostic tools have you used or seen used? Logging seems to be the predominate method, which makes sense. We have a fairly sophisticated logging frame work in place with different levels of verbosity and the ability to filter on specific modules (actually we can filter down to the granularity of a single file). Error logs are placed strategically to manufacture a pretty good representation of a stack trace when an error occurs. We don't have the luxury of 10 million terabytes of disk space since I work on embedded platforms, so we have two ways of getting them off the system: a serial port and a syslog server. However, an issue we run into sometimes is actually getting the user to turn the logs on. Our current framework often requires some user interaction.

  Read the article

• How to schedule a backup in Plesk for Database and configuration?

  - by Dilip Rajkumar

  I like to make a scheduled backup in plesk 10.4. My target is to Take the backup of Database and configuration and put in the FTP location. I dont see any option in backup manager in plesk. Any help is greatly appreciated. Then there is a setting "Suspend domain until backup task is completed" If I uncheck will that be a problem? Is that a way to get backup of specific database of a domain in plesk?. Any help is greatly appreciated. Thanks in advance..

  Read the article

• WizMouse Enables Mouse Over Scrolling on Any Window

  - by ETC

  WizMouse is a free and lightweight Windows application that enables a simple but effective trick: the ability to scroll the contents of a window that is under your mouse cursor without shifting the focus to that window. It may not seem like much, at first glance, but the ability to scroll a window without having to click on it and shift the focus of your current window is a huge time saver. Once WizMouse is installed simply mousing over any open window and engage your scroll wheel for instant scroll with no additional click or shift in focus necessary. You’ll get so used to it you’ll forget that it wasn’t built into Windows from the start. Hit up the link below to grab a copy of WizMouse, a free and Windows only application. WizMouse [Antibody Software] Latest Features How-To Geek ETC Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) WizMouse Enables Mouse Over Scrolling on Any Window Enhance GIMP’s Image Editing Power with Gimp Paint Studio Reclaim Vertical UI Space by Moving Your Tabs to the Side in Firefox Wind and Water: Puzzle Battles – An Awesome Game for Linux and Windows How Star Wars Changed the World [Infographic] Tabs Visual Manager Adds Thumbnailed Tab Switching to Chrome

  Read the article

• Snow Leopard, PHP, and MySQL

  - by Peter

  I have just installed Snow Leopard and now my PHP/MySQL program ends in a "Segmentation fault". I have been searching the web for a solution, I realize that there are some issues with SL/PHP/MySQL, but I have not found anything that works yet. I downloaded the binary MySQL package mysql-5.1.42-osx10.6-x86_64. I have updated the php.ini file as suggested at various posts. When I run PHP and connect to the MySQL server the behavior is a bit random. In many cases it works fine to connect and read data. In my specific case the PHP program constructs a LOAD DATA LOCAL INFILE ... statement to load data from a text file. It should do several such queries after each other in a loop. It works one time but the halts in a "Segmentation fault". The program worked fine in Leopard, but not now. My versions are: OS 10.6.2, PHP 5.3.0, MySQL 5.1.42

  Read the article

• Better solution then simple factory method when concrete implementations have different attributes

  - by danip

  abstract class Animal { function eat() {..} function sleep() {..} function isSmart() } class Dog extends Animal { public $blnCanBark; function isSmart() { return $this->blnCanBark; } } class Cat extends Animal { public $blnCanJumpHigh; function isSmart() { return $this->blnCanJumpHigh; } } .. and so on up to 10-20 animals. Now I created a factory using simple factory method and try to create instances like this: class AnimalFactory { public static function create($strName) { switch($strName) { case 'Dog': return new Dog(); case 'Cat': return new Cat(); default: break; } } } The problem is I can't set the specific attributes like blnCanBark, blnCanJumpHigh in an efficient way. I can send all of them as extra params to create but this will not scale to more then a few classes. Also I can't break the inheritance because a lot of the basic functionality is the same. Is there a better pattern to solve this?

  Read the article

• Access Methods to a computer Using MAC Address

  - by Dimal Chandrasiri

  I have my own wifi network at home & recently when I checked the active clients on the wifi I found out the there is one active client. Router shows the MAC address of this client and I want to Access this computer in order to let him know that he's doing a wrong thing. I dont intent to do any harm to his data. I just want to know a method to send him a message saying "Buy you own wifi". How can I achieve this using a windows 8 computer. Is there any specific softwares that I can use or will the netsend command do the trick! Thank you.

  Read the article

• Traffic shaping & monthly traffic limit in Tomato?

  - by Matt H

  Is there a way to do a monthly traffic limit in Tomato, DDWRT or OpenWRT in addition to the regular QoS? This is for a house with several students sharing the internet. I.e. for a specific IP address, IP Range or MAC address, the firmware will count the download traffic for that month. When a configurable limit is set, it'll either limit it to say 64kbit/s up/down or drop all traffic and maybe redirect web traffic to an internal web server telling them that they have exceeded their quota. How can this be done with those firmwares?

  Read the article

• software to allow a friend to look on your screen

  - by acidzombie24

  I want a friend of mine to review my code. I have a mic built into my laptop but i can use another software for voice chat. So i would like to have him to either view my screen (taking control might be fine) or show me his screen so he can talk about a specific piece of code. What software is good for this? We both think about security so an MS product (netmeeting? if that still exist on normal msn live installs) or an open source would be preferred. Should be free.

  Read the article

• Windows XP Home Edition SP3 cant recognise PCMIA SD Card

  - by Pozo

  System Specifications: Laptop : Dell Inspiron 6000 OS: Windows Home Edition SP3 SD Adapter: Hagiwara Smart Media Adapter I inserted the card into the slot, windows xp recognises the device, lists the pcmia controller on the device manager list, an entry appears under the IDE ATA/ATAPI category on the device manager as well. However, the device does not show under my computer and the driver does not get assigned a letter number. I checked the system logs from the device manager and there were no logged errors. Checking the Hagiwara support website, the manufacturer indicates that the adapter driver is the same as the windows xp pcmia controller. Checking Dell's website, no specific drivers were listed for that either. General Search on the web indicates that multiple people face similar problems with their SD cards, yet none actually spell out the route issue that causes this. Please let me know if you have any suggestions for further debugging. Thanks in advance

  Read the article

• Adding a trigger command to autocomplete function in zsh

  - by mkaito

  When you define an alias like alias g=git, the shell will pick it up and run the corresponding autocomplete function. Now, there's a program out there called hub, which is basically a supserset of git, with some added, github-specific functionality. The recommended way to use hub is to alias git=hub. Of course, this won't trigger the autocomplete function for git, which makes sense. Now, if I wanted to have git's autocomplete trigger for hub, the only way I know of is editing /usr/share/zsh/functions/Completion/Unix/_git and adding hub in the first line as trigger. While this works, it isn't practical, since this file will get overwritten with the next zsh release. Assuming hub won't provide a zsh completion function any time soon, is there another way of adding hub to the trigger commands for git's autocomplete function?

  Read the article

• At what point would you drop some of your principles of software development for the sake of more money?

  - by MeshMan

  I'd like to throw this question out there to interestingly see where the medium is. I'm going to admit that in my last 12 months, I picked up TDD and a lot of the Agile values in software development. I was so overwhelmed with how much better my development of software became that I would never drop them out of principle. Until...I was offered a contracting role that doubled my take home pay for the year. The company I joined didn't follow any specific methodology, the team hadn't heard of anything like code smells, SOLID, etc., and I certainly wasn't going to get away with spending time doing TDD if the team had never even seen unit testing in practice. Am I a sell out? No, not completely... Code will always been written "cleanly" (as per Uncle Bob's teachings) and the principles of SOLID will always be applied to the code that I write as they are needed. Testing was dropped for me though, the company couldn't afford to have such a unknown handed to the team who quite frankly, even I did create test frameworks, they would never use/maintain the test framework correctly. Using that as an example, what point would you say a developer should never drop his craftsmanship principles for the sake of money/other benefits to them personally? I understand that this can be a very personal opinion on how concerned one is to their own needs, business needs, and the sake of craftsmanship etc. But one can consider that for example testing can be dropped if the company decided they would rather have a test team, than rather understand unit testing in programming, would that be something you could forgive yourself for like I did? So given that there is something you would drop, there usually should be an equal cost in the business that makes up for what you drop - hopefully, unless of course you are pretty much out for lining your own pockets and not community/social collaborating ;). Double your money, go back to RAD? Or walk on, and look for someone doing Agile, and never look back...

  Read the article

• Open source system for swipe card access?

  - by Moduspwnens

  We're looking at replacing our campus-wide magnetic swipe card system with something more robust. The "programmer" side of me says there's got to be an open-source, scalable solution that already does this, but all I've been able to find are proprietary vendor-specific solutions. Ideally, it'd have the following: Based on some open standard that allows us to select from a wide selection of card readers (like IMAP or HTTP) Support different kinds of card access (magnetic strip, RFIDs, etc.) Future-proof (to the extent possible) The lack of information I'm finding leads me to believe I'm not searching for the right things... or such a solution doesn't exist. Is there not some basic, open-source solution to this (like MySQL for databases, or Moodle for an LMS, or Apache for a web server)?

  Read the article

• (Abstract) Game engine design

  - by lukeluke

  I am writing a simple 2D game (for mobile platforms) for the first time. From an abstract point of view, i have the main player controlled by the human, the enemies, elments that will interact with the main player, other living elements that will be controlled by a simple AI (both enemies and non-enemies). The human player will be totally controlled by the player, the other actors will be controlled by AI. So i have a class CActor and a class CActorLogic to start with. I would define a CActor subclass CHero (the main player controlled with some input device). This class will probably implement some type of listener, in order to capture input events. The other players controlled by the AI will be probably a specific subclass of CActor (a subclass per-type, obviously). This seems to be reasonable. The CActor class should have a reference to a method of CActorLogic, that we will call something like CActorLogic::Advance() or similar. Actors should have a visual representation. I would introduce a CActorRepresentation class, with a method like Render() that will draw the actor (that is, the right frame of the right animation). Where to change the animation? Well, the actor logic method Advance() should take care of checking collisions and other things. I would like to discuss the design of a game engine (actors, entities, objects, messages, input handling, visualization of object states (that is, rendering, sound output and so on)) but not from a low level point of view, but from an high level point of view, like i have described above. My question is: is there any book/on line resource that will help me organize things (using an object oriented approach)? Thanks

  Read the article

• Have both domain and non-domain users use NetApp CIFS storage

  - by zladuric

  My specific use case is that I have a NetApp CIFS storage that's in the domain, say, intranet. But I also have one hyper-v host that's not in the domain. I can't allow it into the domain, but I need to create guests whose VHD is on the storage. How can I achieve this? When I simply connect to a CIFS share and create a VHD there, it works, but when I try to add that VHD to the virtual machine, I get a "Failed to set folder permissions" error - probably due to folder ownership being in the domain admin. Is there a way around this? So both domain and non-domain users use the same directory?

  Read the article

• @CodeStock 2012 Review: Leon Gersing ( @Rubybuddha ) - "You"

  "YOU"Speaker: Leon GersingTwitter: @Rubybuddha Site: http://about.me/leongersing I honestly had no idea what I was getting in to when I sat down in to this session. I basically saw the picture of the speaker and knew that it would be a good session. I was completely wrong; it was the BEST SESSION of CodeStock 2012.  In fact it was so good, I texted another coworker attending the conference to get over and listen to Leon. Leon took on the concept of growth in the software development community. He specifically referred David Hansson in his ability to stick to his beliefs when the development community thought that he was crazy for creating Ruby on Rails. If you do not know this story Ruby on Rails is one of the fastest growing web languages today. In addition, he also touched on the flip side of this argument in that we must be open to others ideas and not discard them so quickly because we all come from differing perspectives and can add value to a project/team/community. This session left me with two very profound concepts/quotes: “In order to learn you must do it badly in front of a crowed and fail.” - @Rubybuddha I can look back on my career so far and say that he is correct; I think I have learned the most after failing, especially when I achieved this failure in front of other. “Experts must be able to fail.” - @Rubybuddha I think we can all learn from our own mistakes but we can also learn from others. When respected experts fail it is a great learning opportunity for the entire team as well as the person who failed. When expert admit mistakes and how they worked through them can be great learning tools for other developers so that they know how to avoid specific scenarios and if they do become stuck in the same issue they will know how to properly work their way out of them.

  Read the article

• Sendmail relay out of Amazon EC2?

  - by Stephen Belanger

  I have a site running on CentOS 5.4 through Amazon EC2. Unfortunately, Amazon has had nothing but trouble with their entire IP range getting black listed from spam tracking services regularly. I need a mail server, so I setup an smtp server elsewhere that I want to send to, but I can't just send directly to it through PHP because the direct smtp request is way too slow. What I want to do is relay through sendmail, but I've never used sendmail before, so I have no idea how to configure it. All I want is for all emails sent from localhost to be relayed to one specific external server, but I don't know how to do that. I tried to find a tutorial online, but couldn't find anything that was particularly clear as to how I go about doing that. Can anyone help me out?

  Read the article

• Dual External Monitors Through Docking Station on ASUS G73JW-XT1

  - by user60695

  I am getting an ASUS G73JW-XT1; and I would like to set it up so that I can plug it into a docking station at my desk, and use 2 external monitors (not the laptop display and an additional monitor). The computer supports a DVI and HDMI output, but I cannot find any docking stations that will support two external displays, as well as audio ports and USB ports for other peripherals. Does anybody know of a specific docking station that will do this, or another workaround without having to plug in several things to my laptop every time I bring it to my desk?

  Read the article

• How to loop section from a song correctly?

  - by Teflo

  I'm programming a little Music Engine for my game in C# and XNA, and one aspect from it is the possibility to loop a section from a song. For example, my song has an intropart, and when the song reached the end ( or any other specific point ), it jumps back where the intropart is just over. ( A - B - B - B ... ) Now I'm using IrrKlank, which is working perfectly, without any gaps, but I have a problem: The point where to jump back is a bit inaccurate. Here's some example code: public bool Passed(float time) { if ( PlayPosition >= time ) return true; return false; } //somewhere else if( song.Passed( 10.0f ) ) song.JumpTo( 5.0f ); Now the problem is, the song passes the 10 seconds, but play a few milliseconds until 10.1f or so, and then jumps to 5 seconds. It's not that dramatic, but very incorrect for my needs. I tried to fix it like that: public bool Passed( float time ) { if( PlayPosition + 3 * dt >= time && PlayPosition <= time ) return true; return false; } ( dt is the delta time, the elapsed time since the last frame ) But I don't think, that's a good solution for that. I hope, you can understand my problem ( and my english, yay /o/ ) and help me :)

  Read the article

• Advancing my Embedded knowledge.....with a CS degree.

  - by Mercfh

  So I graduated last December with a B.S. in Computer Science, in a pretty good well known engineering college. However towards the end I realized that I actually like Assembly/Lower level C programming more than I actually enjoy higher level abstracted OO stuff. (Like I Programmed my own Device Drivers for USB stuff in Linux, stuff like that) But.....I mean we really didn't concentrate much on that in college, perhaps an EE/CE degree would've been better, but I knew the classes......and things weren't THAT much different. I've messed around with Atmel AVR's/Arduino stuff (Mostly robotics) and Linux Kernals/Device Drivers. but I really want to enhance my skills and maybe one day get a job doing embedded stuff. (I have a job now, it's An entry level software dev/tester job, it's a good job but not exactly what my passion lies in) (Im pretty good with C and certain ASM's for specific microcontrollers) Is this even possible with a CS degree? or am I screwed? (since technically my degree usually doesn't involve much embedded stuff) If Im NOT screwed then what should I be studying/learning? How would I even go about it........ I guess I could eventually say "Experienced with XXXX Microcontrollers/ASM/etc...." but still, it wouldn't be the same as having a CE/EE degree. Also....going back to college isn't an option. just fyi. edit: Any book recommendations for "getting used to this stuff" I have ARM System-on-Chip Architecture (2nd edition) it's good.....for ARM stuff lol

  Read the article

• What triggered the popularity of lambda functions in modern mainstream programming languages?

  - by Giorgio

  In the last few years anonymous functions (AKA lambda functions) have become a very popular language construct and almost every major / mainstream programming language has introduced them or is planned to introduce them in an upcoming revision of the standard. Yet, anonymous functions are a very old and very well-known concept in Mathematics and Computer Science (invented by the mathematician Alonzo Church around 1936, and used by the Lisp programming language since 1958, see e.g. here). So why didn't today's mainstream programming languages (many of which originated 15 to 20 years ago) support lambda functions from the very beginning and only introduced them later? And what triggered the massive adoption of anonymous functions in the last few years? Is there some specific event, new requirement or programming technique that started this phenomenon? IMPORTANT NOTE The focus of this question is the introduction of anonymous functions in modern, main-stream (and therefore, maybe with a few exceptions, non functional) languages. Also, note that anonymous functions (blocks) are present in Smalltalk, which is not a functional language, and that normal named functions have been present even in procedural languages like C and Pascal for a long time. Please do not overgeneralize your answers by speaking about "the adoption of the functional paradigm and its benefits", because this is not the topic of the question.

  Read the article

• Return the date of the day under an if formula with Excel or VBA

  - by Celine

  I have two columns A and B and many lines with some specific tasks to be done. In column B, I have a drop-down list with the name of people who are scheduled for the task . And in column A, I want the date of the day the person signed off the task. What should I do in VBA or in Excel so that, for example, when somebody signs off a task in the cell B11, A11 returns me the date of the day. I have used the formula below in A11 =if (B11<"", today(),"") but everytime i open the file the date is updated. So it doesn't allow me to keep track of everybody's work. I tried with vba but couldn't write a function that gives me the right answer. i'm pretty new at vba so i'm sorry if my question sounds stupid

  Read the article

• Ray Tracing concers: Efficient Data Structure and Photon Mapping

  - by Grieverheart

  I'm trying to build a simple ray tracer for specific target scenes. An example of such scene can be seen below. I'm concerned as to what accelerating data structure would be most efficient in this case since all objects are touching but on the other hand, the scene is uniform. The objects in my ray tracer are stored as a collection of triangles, thus I also have access to individual triangles. Also, when trying to find the bounding box of the scene, how should infinite planes be handled? Should one instead use the viewing frustum to calculate the bounding box? A few other questions I have are about photon mapping. I've read the original paper by Jensen and many more material. In the compact data structure for the photon they introduce, they store photon power as 4 chars, which from my understanding is 3 chars for color and 1 for flux. But I don't understand how 1 char is enough to store a flux of the order of 1/n, where n is the number of photons (I'm also a bit confused about flux vs power). The other question about photon mapping is, if it would be more efficient in my case to store photons per object (or even per Object's triangle) instead of using a balanced kd-tree. Also, same question about bounding box of the scene but for photon mapping. How should one find a bounding box from the pov of the light when infinite planes are involved?

  Read the article

< Previous Page | 345 346 347 348 349 350 351 352 353 354 355 356  | Next Page >