Search Results

Search found 23092 results on 924 pages for 'mac address'.

Page 349/924 | < Previous Page | 345 346 347 348 349 350 351 352 353 354 355 356  | Next Page >

• How to prevent Ubuntu from combining networks on 2 NIC server?

  - by SolarPower

  I've got a Ubuntu Server 10.10 with 2 network interfaces with a cable plugged into both going to switches on completely different networks with different routers. One network is the 10.1.10.X network with a separate gateway/router - the server has an IP of 10.1.10.50 with the gateway IP of 10.1.10.1. The other interface is 10.2.10.X, IP 10.2.10.50, gateway 10.2.10.1. All my Mac machines are on the 10.2.10.X network, and all servers on the 10.1.10.X. The ONLY connection between the two is this machine. From a Mac in my office, I CANNOT ping any computer on the 10.1.10.X network except the Ubuntu machine I'm talking about. However, under the Shared column in Finder, I can see every server on the other network listed. That makes me believe that somehow this Ubuntu machine is letting certain requests span both networks, which is a security problem. Hope this is enough info.

  Read the article

• unable to ping hostname, but \\hostname\\c$ works!?

  - by ciscokid

  I'm having a strange issue on my initial lab setup. Situation: Host with OS Server 2008 R2 64bit, on this host a Virtual Machine in Hyper-V with OS Server 2008 SP1 32bit. The virtual machine has a fixed ip, and is referring to itself for the preferred DNS Server (dns server role has been installed). The host has tcp/ip set to automatic (so automatic ip from router, and dns/gateway = router). Both are able to ping each other on IP address (same ip range). Both are NOT able to ping each other on hostname (sounds logic because virtual machine dns server does not yet have a dns record for the hostmachine). But here's the strange thing: I am able to set up a working network mapping on the Virtual Machine to the host: \hostname\c$. The first thing I thougt was 'something' is blocking the ping request, so I completely disabled Windows Firewall on both Virtual Machine and host. Still pinging on hostname in both ways didn't work, yet I am able to access the network mapping on hostname. There is no extra software installed on both systems (clean windows server 2008).Can someone tell me what is causing this? I always thought: ping on IP address works = network mapping on IP address works. Pinging on hostname doesn't work = network mapping on hostname doesn't work neither. Where am I wrong? Looking forward to your advice!

  Read the article

• SSLCipherSuite - disable weak encryption, cbc cipher and md5 based algorithm

  - by John

  A developer recently ran a PCI Scan with TripWire against our LAMP server. They identified several issues and instructed the following to correct the issues: Problem: SSL Server Supports Weak Encryption for SSLv3, TLSv1, Solution: Add the following rule to httpd.conf SSLCipherSuite ALL:!aNULL:!eNULL:!LOW:!EXP:RC4+RSA:+HIGH:+MEDIUM Problem: SSL Server Supports CBC Ciphers for SSLv3, TLSv1 Solution: Disable any cipher suites using CBC ciphers Problem: SSL Server Supports Weak MAC Algorithm for SSLv3, TLSv1 Solution: Disable any cipher suites using MD5 based MAC algorithms I tried searching google for a comprehensive tutorial on how to construct an SSLCipherSuite directive to meet my requirements, but I didn't find anything I could understand. I see examples of SSLCipherSuite directives, but I need an explanation on what each component of the directive does. So even in the directive SSLCipherSuite ALL:!aNULL:!eNULL:!LOW:!EXP:RC4+RSA:+HIGH:+MEDIUM, I dont understand for example what the !LOW means. Can someone either a) tell me the SSLCipherSuite directive that will meet my needs or b) show me a resource that clearly explains each segment of a SSLCipherSuite is and how to construct one?

  Read the article

• How to use multiple SkyDrive accounts on one computer?

  - by user1563721

  Is there any way how to use multiple SkyDrive accounts on one computer running MAC OS X or Windows 8? I would like to sync data from different accounts to different folder and not to merge these accounts to one. The reason is that every SkyDrive has it's storage limits and I'm using every account for different work data. The result should be the following: I have a number of SkyDrive accounts every for different work, let's say: S1 S2 S3 I would like to sync exactly the same number of folders on computer using different accounts to sync them: SkyDriveS1Folder - (folder on computer which syncing the content of S1 SkyDrive) SkyDriveS2Folder - (folder on computer which syncing the content of S2 SkyDrive) SkyDriveS3Folder - (folder on computer which syncing the content of S3 SkyDrive) Is it possible somehow? I found a workaround for Windows machines (http://superuser.com/questions/525932/running-multiple-instances-of-microsoft-skydrive) but is there anything for MAC OS X machines? Or is it possible through any third party application?

  Read the article

• Problem with TL-R480T+ and static routes

  - by Globulopolis

  Hi! I've some question about this router. Before starting, some configurations, specified by my provider. Wan1 VPN IP - 192.168.172.84 Mask - 255.255.255.0 Gateway - 192.168.172.253 DNS - 195.110.6.7 Wan2 Dynamic IP DHCP - 168.120.1.34 Mask - 255.255.255.0 Router IP 192.168.1.1 Computer IP 192.168.1.7 Routes: route -p add 192.168.0.0 mask 255.255.0.0 192.168.172.253 route -p add 195.110.6.0 mask 255.255.254.0 192.168.172.253 route -p add 88.135.112.0 mask 255.255.240.0 192.168.172.253 route -p add 178.219.160.0 mask 255.255.240.0 192.168.172.253 For first provider I need to provide a routes. 'Cause router does not support different routes for different WAN interfaces I put them in "Static routes". But when I try to save them I've got an error: Destination IP address can not be set in a same subnet with the WAN or LAN IP address. If I change IP's to local like 192.168.x.x router tell me: Gateway must be set in a same subnet with WAN or LAN IP address. Changing mask on WAN1 interface to 255.255.0.0 doesn't help. Any ideas? PS! Or maybe I'm must email to TP-Link support?

  Read the article

• multiple ip for a server not reachable

  - by andrewk

  FYI: I've read everything on Serverfault related to this question and have faced a different issue. Simply put, I've got one server (apache2) with couple of sites on it. It currently has 1 ip. I'm trying to assign/add another ip to that server, so I can give each site a different ip for ssl purposes. I am not lucking out. The new ip simply is unreachable, I've pinged it. This is what I've got below, what am I doing wrong. auto lo iface lo inet loopback auto eth0 eth0:0 eth0:1 iface eth0 inet static address 70.116.5.244 netmask 255.255.255.0 gateway 70.116.5.1 #THE NEW IP iface eth0:0 inet static address 26.175.217.102 netmask 255.255.255.0 #PRIVATE IP iface eth0:1 inet static address 192.168.158.88 netmask 255.255.128.0 NOTE: THESE IP'S ARE TWEAKED BUT RELATIVE I've read many questions here 90% similar to this but most actually have the IP respond, not this case. Thanks netstar -r output Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default gw-u6.linode.co 0.0.0.0 UG 0 0 0 eth0 70.116.5.0 * 255.255.255.0 U 0 0 0 eth0 26.175.217.0 * 255.255.255.0 U 0 0 0 eth0 192.168.128.0 * 255.255.128.0 U 0 0 0 eth0

  Read the article

• Configuring port forwarding for SSH - no response outside LAN [migrated]

  - by WinnieNicklaus

  I recently moved, and at the same time purchased a new router (Linksys E1200). Prior to the move, I had my old router set up to forward a port for SSH to servers on my LAN, and I was using DynDNS to manage the external IP address. Everything worked great. I moved and set up the new router (unfortunately, the old one is busted so I can't try things out with it), updated the DynDNS address, and attempted to restore my port forwarding settings. No joy. SSH connections time out, and pings go unanswered. But here's the weird part (i.e., key to the whole thing?): I can ping and SSH just fine from within this LAN. I'm not talking about the local 192.168.1.* addresses. I can actually SSH from a computer on my LAN to the DynDNS external address. It's only when the client is outside the LAN that connections are dropped. This surely suggests a particular point of failure, but I don't know enough to figure out what it is. I can't figure out why it would make a difference where the connections originate, unless there's a filter for "trusted" IP addresses, which is perhaps just restricted to my own. No settings have been touched on the servers, and I can't find any settings suggesting this on the router admin interface. I disabled the router's SPI firewall and "Filter anonymous traffic" setting to no avail. Has anyone heard of this behavior, and what can I do to get past it?

  Read the article

• Postfix rewrite sender: why doesn't this work

  - by Nick Coleman

  I have server A with an IP address only and a dummy FQDN (on the basis all machines should have a FQDN): pants.net.invalid. All mail is relayed through another server elsewhere, which works fine. On server A, Postfix rewrites the sender address with smtp_generic_maps = hash:/etc/postfix/generic. According to the Rewrite manual at http://www.postfix.org/ADDRESS_REWRITING_README.html#remote, this should rewrite all outgoing external mail's Sender address: $ cat /etc/postfix/generic @pants.net.invalid [email protected] but it does not. postmap -q [email protected] returns nothing. This works: [email protected] [email protected] It seems as though it is doing regex matching even though I specify type hash:. Clearly I am misunderstanding the manual. I don't want to use regex or pcre expressions because there are only a couple of users (root and two others) and I don't want the overhead. I can specify the users exactly and it works. But, I would like to know what I am misunderstanding for future reference. Thanks.

  Read the article

• SFTP only works occasionally

  - by 82din

  I suddenly get this error using SFTP: Status: Connecting to example.com... Response: fzSftp started Command: open "[email protected]" 22 Command: Pass: ********* Status: Connected to example.com Status: Retrieving directory listing... Command: pwd Response: Current directory is: "/root" Command: ls Status: Listing directory /root Error: Connection timed out Error: Failed to retrieve directory listing I tried using FileZila, Cyberduck, Shell (Terminal), same result. However, it worked fine today (just a few seconds) in Passive mode. I guess something changed in my network, so I have tried both: Active and Passive mode: Connecting to probe.filezilla-project.org Response: 220 FZ router and firewall tester ready USER FileZilla Response: 331 Give any password. PASS 3.6.0.2 Response: 230 logged on. Checking for correct external IP address Retrieving external IP address from http://checkip.dyndns.org:8245/ Checking for correct external IP address IP <external IP> big-bf-ccc-f Response: 200 OK PREP 49565 Response: 200 Using port 49565, data token 380352881 PORT 186,15,222,5,193,157 Response: 200 PORT command successful LIST Response: 150 opening data connection Response: 503 Failure of data connection. Server sent unexpected reply. Connection closed Because I'm working behind a router, I get my external IP from http://checkip.dyndns.org:8245/ I also tested different range of ports.

  Read the article

• Configuring port forwarding for SSH - no response outside LAN

  - by WinnieNicklaus

  I recently moved, and at the same time purchased a new router (Linksys E1200). Prior to the move, I had my old router set up to forward a port for SSH to servers on my LAN, and I was using DynDNS to manage the external IP address. Everything worked great. I moved and set up the new router (unfortunately, the old one is busted so I can't try things out with it), updated the DynDNS address, and attempted to restore my port forwarding settings. No joy. SSH connections time out, and pings go unanswered. But here's the weird part (i.e., key to the whole thing?): I can ping and SSH just fine from within this LAN. I'm not talking about the local 192.168.1.* addresses. I can actually SSH from a computer on my LAN to the DynDNS external address. It's only when the client is outside the LAN that connections are dropped. This surely suggests a particular point of failure, but I don't know enough to figure out what it is. I can't figure out why it would make a difference where the connections originate, unless there's a filter for "trusted" IP addresses, which is perhaps just restricted to my own. No settings have been touched on the servers, and I can't find any settings suggesting this on the router admin interface. I disabled the router's SPI firewall and "Filter anonymous traffic" setting to no avail. Has anyone heard of this behavior, and what can I do to get past it?

  Read the article

• Windows Server 2008 R2 DNS - One IP, multiple servers

  - by Blu Dragon

  I need opinions and examples on how to best to accomplish the setup I am looking for. I have a public-facing AD domain server with one public IP address. I have setup an external zone for example.com and I successfully have my own name servers pointing to it at ns0.example.com and ns1.example.com. I also have an internal zone for my private network at home.example.com. I am behind a router with the domain server in the DMZ. I want dev.example.com to be accessible from the outside world over https and to point to internal IP address 192.168.1.78. Likewise, I want www.example.com to be accessible from the outside world and point to internal IP address 192.168.1.79. Both dev and www servers are CentOS 5.6 VMs running inside of Hyper-V on the domain server (bad idea I know but I am limited on hardware atm). What is best way to achieve this? From what I have read and researched on Google, I may need to setup a reverse proxy but I am not sure how well that will work with SSL.

  Read the article

• How can I tell whether an interrupted rm -r removed any files?

  - by Jake Petroules

  I installed sshfs a Linux box and then mounted my Mac home directory. In the middle of troubleshooting a configuration issue, I did an ls -l on the mount directory (as normal user), receiving: total 0 d????????? ? ? ? ? ? sl I then ran sudo rm -r on that directory but pressed Ctrl+C to terminate it immediately before it (looks) like the command did anything. I notice no files missing but I want to be sure - is there a way I can somehow inspect the filesystem log on my Mac to see if any files were actually removed?

  Read the article

• [iTunes] Using custom ID3-Tags?

  - by shox

  Hi guys, I hope I am in the right forum for this question. I love foobar2000 on windows and have 2 custom Tags for my mp3s Rate and mood. Now I have to use a Mac to play my music and emulating foobar won't work, because foobar has to recreate its database every time it starts... ans thats about 2h of hahsing - no good. So is there any way to read out, order by and write custom tags with iTunes or any other, if possible free, mac app? Thanks for your answers.

  Read the article

• Bridge virtual machines out WLAN interface

  - by Thomas

  It seems that my wlan card (intel 5100 AGN) firmware doesn't allow "spoofing" MAC addresses. This has the side effect of destroying the capability to bridge out my virtual machines on that interface. Apparently this is a common thing on wlan cards. I can see the incoming traffic just fine in my virtual machines, but their DHCP queries don't get bridged out of the WLAN card. It works perfectly well when using the wired ethernet port. Is there a workaround for this? MAC-NAT or something? I don't want to route my virtual machines out to the Internet because I don't want my host OS to even have an IP address. I'm using Linux and KVM for virtualization.

  Read the article

• Cisco Catalyst 3750 connected to Cisco ASA 5505 and dropping packets

  - by Bo102010

  (Cross posted from Super User per suggestion there) At the office, I have inherited a network that I am still trying to fully comprehend. I have a problem today with a new connection between: A port on a Cisco Catalyst 3750 [WS-C3750G-48TS-S running C3750-IPSERVICESK9-M version 12.2(53)SE1] A port on a Cisco ASA 5505 [ASA Software version 8.3(2)] The 3750 is home to a Vlan that has a few ports assigned to it. interface Vlan3 description Internal network (172.18.160.0/24) ip address 172.18.160.1 255.255.255.0 I have a host (outside of my control) that needs to be in this VLAN (i.e it must have an address 172.18.160.something/24) that also needs to access the Internet. To accomplish this, I ran a link from the Catalyst (Gi1/0/13) to the ASA (Ethernet 0/5). I configured the Catalyst port like so: interface GigabitEthernet1/0/13 description To ASA, 172.18.160.69 switchport access vlan 3 switchport mode access speed 100 duplex full I configured the ASA like so: interface Vlan1 nameif inside security-level 100 ip address 172.18.160.69 255.255.255.0 interface Ethernet0/5 speed 100 duplex full Then I plugged the host into Ethernet 0/4 on the ASA and instructed its owner to make its default gateway 172.18.160.69. I made a NAT rule in the ASA and set up some rules, and it's able to access the Internet without issue. However, I noticed that the Catalyst reports a ton of packets being dropped toward the ASA. Catalyst3750#show interfaces GigabitEthernet 1/0/13 | include counters|drops Last clearing of "show interface" counters 00:28:13 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 136909347 This is a huge number of drops, since there's not much traffic on this VLAN at all. I tried these things: Make sure speed and duplex agree on both sides (100 Mbps / Full) Set no cdp enable on the Catalyst Gi10/13 Set no keepalive on the Catalyst Gi10/13 Checked for excessive CPU usage on both Checked for excessive traffic on both Am I missing something? Any help would be appreciated.

  Read the article

• Creating an interactive "movie" from a Microsoft PowerPoint 2003 presentation (.ppt file) containing animation

  - by Andrew

  I have created a Microsoft PowerPoint 2003 presentation (a .ppt file) on Windows XP that contains a lot of animation, using PowerPoint's Custom Animation tools. I would like to share this presentation -- animations and all -- with a colleague who has a Mac computer and does not have PowerPoint or Keynote. Is it possible to make a "movie" from my .ppt file that contains a lot of animation? I recall that another colleague once made me a QuickTime "movie" from a PowerPoint file, I think (although I do not remember whether he made it using Windows or Mac). On this "movie," clicking advanced the animation/slide, just as clicking would do in an actual PowerPoint presentation. In that sense, it was not really strictly a movie, since I could interact with it by clicking. Do you know how to make such an interactive "movie" from a PowerPoint 2003 presentation (a .ppt file)? Thank you for your time!

  Read the article

• Networking DOS within Windows 7 XP Mode, with a Windows XP/7 Networked Share

  - by theonlylos

  For awhile now, one of my clients has been stuck with Corel Paradox 4.0 (it used to be the biggest database system in the DOS days, until Microsoft released Access in the early 90's) so for awhile I've managed to keep it on life support on Windows XP for a few years, however since switching to Windows 7 x64, I've had to resort to using XP Mode as the sandbox to keep it up and running. While I am able to run Paradox as usual in XP Mode, I'm having a serious issue where if I try connecting the install to the network share (which is located on the Windows 7 portion of the system), Paradox keeps exiting because it says the serial number is invalid. Now, I know for a fact that this is an issue with the virtual loopback adapter and also having the VM linked to the physical ethernet adapter -- and while I have solved this issue before, most of my fixes have been bandages since after a few weeks the issue pops up again. Long story short, I wanted to ask if there is a permanent way to link a DOS program to a network share address. For example, when I try doing \tsclient\paradox (the Windows 7 Address) I keep getting an error saying I need a valid network address. I've tried mapping that folder to various drive letters such as P:\Paradox -- but for some reason that keeps failing over time. For what it's worth, Paradox uses a .SOM file to store the network settings, however it isn't editable in Notepad but rather it's controlled by a wizard in Paradox. But if that extension rings any bells, I'd welcome any insights.

  Read the article

• VMWare ESXi virtual machine can contact the gateway but not the DNS server

  - by Nathan Palmer

  I am having a bit of a strange issue. I have a VMWare ESXi server with two virtual machines running on it. They are running just fine and can communicate on the network without a problem. I am now trying to add a third. I am installing Ubuntu 8.04 Server. I assign it a static IP address and it's a fresh installation. Once installed I can ping the gateway but I cannot ping the DNS server. It's on the same network with the other two VMs which are communicating just fine. I have tried to reinstall the operating system but it still fails to connect. Here is /etc/network/interfaces auto eth0 iface eth0 inet static address 192.168.1.23 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 208.67.222.222 #opendns dns-search mydomain.com Here is route Destination | Gateway | Genmask | Flags | Metric | Ref | Use | Iface localnet | * | 255.255.255.0 | U | 0 | 0 | 0 | eth0 default | 192.168.1.1 | 0.0.0.0 | UG | 100 | 0 | 0 | eth0 Since I'm running this behind a FortiGate this is what the sniff command gives me when I try to ping 208.67.222.222 arp who-has 192.168.1.1 tell 192.168.1.23 arp reply 192.168.1.1 is-at MAC 192.168.1.23 -> 208.67.222.222: icmp: echo request 192.168.1.23 -> 208.67.222.222: icmp: echo request 192.168.1.23 -> 208.67.222.222: icmp: echo request 192.168.1.23 -> 208.67.222.222: icmp: echo request 192.168.1.23 -> 208.67.222.222: icmp: echo request As you can see it looks like I never get a response. One interesting thing I notice is the arp reply's MAC doesn't look right. I have cleared the FortiGate's ARP cache though and checked the entry and it seems correct. The MAC it lists is the one for the router. However if I ping from a different virtual machine that is also Ubuntu 8.04 with a nearly identical configuration I get this. 192.168.1.22 -> 208.67.222.222: icmp: echo request 208.67.222.222 -> 192.168.1.22: icmp: echo reply 192.168.1.22 -> 208.67.222.222: icmp: echo request 208.67.222.222 -> 192.168.1.22: icmp: echo reply 192.168.1.22 -> 208.67.222.222: icmp: echo request 208.67.222.222 -> 192.168.1.22: icmp: echo reply So, what could I be missing? Thanks.

  Read the article

• How to prepare and secure a Macbook Pro for work/office?

  - by sunpech

  I plan to use my Macbook Pro at work/office. Before I do so, I will need to speak to my manager on how to properly prepare and secure it since this is the first Mac that will be regularly used on the network in the office and company intranet. The intranet comprises mostly of PCs running Microsoft Windows XP, Server 2003, and Windows 7. So there's definitely a Microsoft-only culture in the office, and the infrastructure/networking team are mostly unfamiliar with non-Microsoft technology and software. What steps and software would I need to prepare and secure my Macbook Pro for work/office? Antivirus/Spyware software for Mac required/necessary? What options do I have to encrypt files, or possibly the whole drive/partition? What network/firewall settings should be enabled?

  Read the article

• Problems switching to QEMU control panel with -nographics

  - by tor

  It seems that the terminal does not recognise CTRL+ALT+2 when typed, so I don't know how to quit the QEMU emulation, or switch to the QEMU control panel. I am running Mac OSX Lion, and I type $ qemu-system-arm -M verdex -pflash flash.img -nographic -sd sdcard.img to start QEMU emulation of an ARM system in the Terminal. I learned from this site that typing CTRL+ALT+2 should work, but the only thing that happens to me, is that a "2" is printed on the command line of the virtual operating system. Any ideas on what could be wrong? Is this a Mac specific issue? (The same problem occurs in both terminal.app and iTerm2)

  Read the article

• Programmatically add/delete users in Exchange

  - by Terry Gamble

  I've got the following set up: ASP.Net site that allows my internal employees to add in new hire information (no secure data, just stuff like name/address/phone) and when they submit this it goes into a database (SQL). Every few minutes a service runs that checks the database and if there are new entries it will add them into Exchange. The issue is I'm not happy with the way the service is doing things, (It's not putting address, etc in it). As I don't have the source code this I'm thinking of recreating it. My issue though is finding a starting point even. I know I'll have to create the scripts through code where the data is retrieved from SQL : Joe Smith 123 Main Street Nowhere, USA 19999 And put that into a powershell cmdlet (not sure exactly the syntax but I can get that figured out unless someone already has it) where the user is created in the Active Directory as a normal user and the mailbox is created simultaneously. From there I just need to fill out fields in Active Directory with the person's address, etc. Finally a deletion routine for when we terminate someone, however I'm sure that it will simply be a cmdlet that is easily shelled out to much like the initial one is, once I can figure out how to start that... Anyone have some good reference points or have already done it and can share?

  Read the article

• How do I determine whether this email bounce is my fault?

  - by David Zaslavsky

  I use Google Apps to handle email for my personal website, so I have an email address [email protected] through that, and I also have a Gmail account [email protected]. Now, I've been trying to send emails to a particular recipient who shall be known as [email protected]. When I send the email from my Gmail account with the @gmail.com address, it works fine. However, when I send it from my Google Apps account with the @ellipsix.net address, I get a bounce message which includes the following text: Delivery to the following recipient failed permanently: [email protected] Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 554 554 mail server permanently rejected message (#5.3.0) (state 17). The bounce message suggests that it is up to the mail administrator of the recipient domain example.com to fix the problem, whatever it is. But I would like to be as sure as possible that nothing needs to be fixed on my end. I already have DKIM signatures enabled for my domain, and I have published an SPF DNS record. Is there something else I should check or do, or can I be confident that it's up to the recipient to fix this issue? Does the "state 17" in the bounce message mean something relevant? I've included my domain name in the question so people who know more than me about this stuff can independently check the relevant DNS records or other information. This other question seems similar, but I've already investigated everything suggested in the answers there (except for contacting Google, which I don't want to do unless I suspect it's their issue to fix).

  Read the article

• exim4 to relay emails

  - by Matthieu

  I have exim4 installed on a Linux box. The basics work fine and I can send email from that machine without any problem to whatever email address. I also have a printer/scanner which is capable to send scans as emails. It needs an SMTP gateway to be able to do that. So I give the IP address of that Linux box, changed the configuration a little bit but still cannot get it to work. After I run dpkg-reconfigure exim4-config, here is what I get in /etc/exim4/update-exim4.conf.conf : dc_eximconfig_configtype='internet' dc_other_hostnames='' dc_local_interfaces='127.0.0.1;192.168.2.2' dc_readhost='' dc_relay_domains='mycompanyemail.com' dc_minimaldns='false' dc_relay_nets='192.168.2.0/24' dc_smarthost='' CFILEMODE='644' dc_use_split_config='false' dc_hide_mailname='' dc_mailname_in_oh='true' dc_localdelivery='mail_spool' My problem is that with this configuration, I can only send to emails @mycompanyemail.com... It says I can use wildcard, but when I do that, the '*' is replaced by whatever filename is in the directory where I run all that. How can I configure it to be able to send emails with any domain ? Or am I doing it wrong ? EDIT : here is the part of the log that's causing trouble : 2011-08-03 16:28:18 H=(NPI2D389C) [192.168.2.20] F=<[email protected]> rejected RCPT <[email protected]>: relay not permitted The first part ([email protected]) does not matter. I changed the email address. The point is that if this email is @mycompanyemail.com then everything works fine. Anything else does not work. I could add gmail.com, but I am looking to have any domain working...

  Read the article

• can't ssh within LAN, but can connect from outside

  - by Patrick B.

  A strange issue: I have a desktop running Ubuntu 10.04 behind a Netgear WNR1000 router performing NAT. I would like to be able to ssh into the desktop from my laptop (running Windows 7 and Cygwin). When at home, both the desktop and the laptop are connected by wireless (the desktop is in a different room from the router). sshd seems to be running fine, since ssh localhost from the desktop works without trouble. Also, ssh my.ip.address from my laptop when it is not behind the router works fine (I am forwarding port 22 on the router to my desktop). However, ssh same.ip.address from within the LAN fails with "Connection refused". ssh 192.168.local.ip.address fails with a different message, "Connection timed out". I can connect if I first ssh to a machine outside the LAN. So far I haven't found anything with Google because with the search terms that seem like they would be relevant, the vast majority of people have the opposite problem - i.e., they can't connect from outside the LAN but can connect within it. I can port forward through a remote server when I'm at home, but this seems like a totally absurd way to connect two computers on the same home LAN. I have already tried stopping and starting sshd on the desktop. Any thoughts?

  Read the article

• How do I configure custom routes when an interface is configured?

  - by ManicDee

  Other Superuser questions have addressed the issue of adding custom routes to access e.g.: multiple networks of a corporate network through one interface, while accessing the Internet through another interface. So assuming that I have a script to add specific routes when en0 is configured, and a separate script to add specific routes when en1 is configured, is there some way I can trigger those scripts to run automatically when Mac OS X/Darwin starts and configures those interfaces? Back in my Linux days, it was possible to add an option in /etc/network/interfaces along the lines of: iface eth0 inet dhcp up /usr/local/sbin/eth0-routes-up Is there something similar for Mac OS X?

  Read the article

< Previous Page | 345 346 347 348 349 350 351 352 353 354 355 356  | Next Page >