Search Results

Search found 10444 results on 418 pages for 'macbook pro retina'.

Page 349/418 | < Previous Page | 345 346 347 348 349 350 351 352 353 354 355 356  | Next Page >

• Routing WIFI and LAN for specific traffic

  - by jakebird451

  I have two network devices aboard my macbook pro: WIFI (en1): Used for general traffic. Connects to an ip of 192.168.19.* via DHCP LAN (en0): Used for specific traffic. Connects to an ip of 192.168.2.10 as a static IP. Does not connect to a router, only a switch for direct routing connection. I have 4 IP addresses I need to access on the LAN: 192.168.2.1 192.168.2.21 192.168.2.20 192.168.2.30 The rest of the traffic needs to go to WIFI. I have tried setting up a routing table for the specific ip addresses, but I only managed to mess up my network. I do not venture out into the world of networking too often, but this was the latest command I have been trying: sudo route add -host 192.168.2.30 -interface en0 This command killed my ability to use ping. It told me that ping could not allocate memory (is that even possible)? It also killed my wifi access. Logging out and back in fixed the issue. I really do not mind to make this solution permanent, so I am fine with a temporary routing.

  Read the article

• Strange Photoshop Problem: Can not select, zoom, paint, option button 'locked'

  - by nikcub

  I have a very strange problem with Photoshop. I can not use any of the tools, since the cursor appears 'locked'. If I select v on my keyboard, it goes to the zoom tool, but the cursor does not change. If I select the paintbrush tool, I can only paint if I hold down the option key. This is what the cursor look like (I had to paint it since I couldn't capture it). It is a rectangle with two lines through it. I am running Photoshop CS4 on a Macbook Pro with Mac OS X 10.6.6. Using both the trackpad and an external Logitech MX5000 mouse I see the same issue. This started when I fired up Photoshop today for the first time in a while. I can't remember changing any options or doing anything that could cause this. Is it possible that the option key is somehow locked in place, or there is some equivalent of num lock on? Very strange problem, I would appreciate any help anybody can offer. Edit: To add, the icon remains the same within all the menu options - it never goes back to being just a normal mouse cursor. Also, right click works fine, and if I hold down option, the cursor goes back to normal and I can paint with it. I can't use Marquee, Lasso, Crop, Type etc. even with option held down. When I go into Bridge, it is the same icon.

  Read the article

• How can I combine 30,000 images into a timelapse movie?

  - by Swift

  I have taken 30,000 still images that I want to combine into a timelapse movie. I have tried QuickTime Pro, TimeLapse 3, and Windows Movie Maker, but with such a huge amount of images, each of the programs fail (I tried SUPER ©, but couldn't get it to work either...?). It seems that all of these programs crash after a few thousand pictures. The images I have are all in .JPG format, at a resolution of 1280x800, and I'm looking for a program that can put these images into a timelapse movie in some kind of lossless format (raw/uncompressed AVI would be fine) for further editing. Does anyone have any ideas, or has anyone tried anything like this with a similar number of pictures?

  Read the article

• Windows 8 blue screen error watchdog violation

  - by Pramodh

  My system is windows 8 pro rtm x64. Recently my system started hanging frequently. Nothing but the restart button works. But now just after hanging it showed me a BSOD error saying watchdog violation. I used bluscreen viewer to see the error in the memory dump and it showed me something about hal.dll, ntoskrnl.exe. This is what windows showed me. Problem signature Problem Event Name: BlueScreen OS Version: 6.2.9200.2.0.0.256.48 Locale ID: 1033 Extra information about the problem BCCode: 133 BCP1: 0000000000000000 BCP2: 0000000000000281 BCP3: 0000000000000280 BCP4: 0000000000000000 OS Version: 6_2_9200 Service Pack: 0_0 Product: 256_1 Bucket ID: 0x133_DPC_NETIO!KfdClassify Server information: c03a9f52-f2b5-483f-9b4a-cbb5be3a72c0 Can anyone please walk me through the steps to get rid of this error please? Thank you.

  Read the article

• Why does the Mac OS X firewall dialog recurringly pop-up and disappear by itself (without letting me

  - by Chris W. Rea

  From time to time, I'll be on my Macbook using a program that accesses the network – whether Firefox, or Sony's Reader Library – really, it seems like it could happen with any program that accesses the network – and for no reason that I can discern so far (that is, it happens intermittently) the OS X firewall dialog pops up to ask me the question: Except it doesn't actually let me click anything before it disappears! That is: the dialog pops up, ... then goes away by itself a second later, then pops up again, ... then goes away by itself a second later, etc. It happens a few times before stopping. It wouldn't be so maddening to be interrupted if I could just be allowed to click "Allow" and make the darn thing go away for good. In Security preferences I have the firewall turned "On", and I would like to keep it that way. Has anybody seen this problem, found the source, and figured out a solution or workaround? Thank you.

  Read the article

• Is there any way to shut up my ATI HD 5770?

  - by slpsys

  So to preface, I basically built Jeff's machine; I already had some of the components, including (scarily enough) the exact same case1. I've been buying bits and pieces over the past few months, which coincided perfectly with his recent post about three monitors, though not being a gamer outright, I opted for the second-from-the-bottom option. After finally plopping all the pieces lovingly into the case this evening, I turn it on...and it sounds like four professional grade hair-driers. Some quick regression analysis determined that with the video card out, the running machine sounded no louder than our house's vents. Basically, my last desktop build included a $45-at-the-time graphics card, and it's been Macbook Pros and workstations since then, so I have zero idea whether I'll just be able to tune the fan speed later on. Will I be able to get this thing to quiet down every time I'm not playing Modern Warfare 2 at maximum framerate, or should I just send this thing back now, and get the quietest card in my pricerange? 1 One thing of note is that I do not have noise-absorbing foam in the case, as is pictured in the article. I'm only mentioning that because I suspect it could drop the overall output a few decibels, but obviously not that many.

  Read the article

• Windows 8 - uninstall AppFabric?

  - by downatone

  I recently upgraded from Win 7 - Win 8. AppFabric was not one of the programs that came up as being incompatible when I ran the upgrade wizard, so I did not uninstall it. Now whenever I goto "Add or remove features" I get the following error: --------------------------- Windows Server AppFabric Setup Wizard --------------------------- Windows Server AppFabric is not supported on current operating system Windows 8 Pro(version 6.2.9200.0). Please refer to installation guide for the list of supported operating systems. --------------------------- OK --------------------------- Unfortunately the only way to uninstall AppFabric is via the "Add or remove features" - does anyone know a commandline command to kick the uninstall so I can at least access "Add or remove features"?

  Read the article

• Viability of Mac OS X 10.9 Time Machine Server in office environment

  - by user197609

  Currently we have about 20 Mac OS 10.9 MacBook Pros (almost all with SSDs) backing up to individual USB drives. I'd like to consolidate these to one drobo thunderbolt drive array attached to a Mac Mini server (running 10.9 server) using time machine server. My question is, will this scale to 20 users? Examples I have seen seem to be 5 or 6 users tops, and this isn't easy for me to test (I'd rather not ask everyone to backup to the array and then switch back to USB drives if it brings our network to its knees). My primary concern is saturating our gigabit network, as time machine backs up every hour for every machine, so there would usually be a couple people backing up at any given time. We also have some people occasionally on our 802.11ac network and not on ethernet (usually connected via 802.11n until people upgrade to newer machines), but most of the time people are connected to our thunderbolt displays which have a gigabit ethernet connection on them. Our network topology is one 32 port gigabit switch with 5 smaller gigabit switches at each desk cluster. The mac mini server is connected directly to the top level switch. Update: Failing information from someone who has done this in practice, I suppose my question is really around how switches work. If three or four people are backing up simultaneously, and then other two (different) users transfer a file between each other, will they be able to transfer the file at gigabit speeds?

  Read the article

• Keyboard not responding on startup

  - by Mestika

  I’m having a weird problem with one of the laptops at my work. Every now and then (not a systematic repeating pattern, but kind of random) the keyboard will not function on start up. The computer boots and it gets to the CTRL + ALT + DELETE screen and it is responding to nothing from the keyboard. The mouse works fine. I then try to force a shutdown and reboot the machine and most of the time it then works. My first thought was that it was a hardware malfunction with the keyboard hardware but it seems strange that the computer can be stationed for several days without being removed and it still “loses” connection to the keyboard. The OS is Windows 7 Pro and it is a Dell Laptop Vostro. Does anyone experienced this kind of problem with a laptop with/with out Windows 7 and maybe got a solution to the problem?

  Read the article

• Problem deleting files in Windows 7

  - by Alex Yan

  Happens sometimes but frequently enough to be a pain in the bum. I press Del or Shift + Del but the file stays there. Then when I try to delete it again, it says that I need permission from the Admin. For it to be deleted, usually I have to restart my computer List of things I've tried: I have admin privileges Hasn't happened since I reinstalled Windows and another form of this happened in my install before the last one I tried takeown in cmd but it says ERROR: Access is denied The files sometimes disappear by themselves after 2 mins or so Refreshing the folder doesn't do anything Unlocker doesn't work either. It asks me if I want to delete it the next boot Windows 7 x64 Pro HDD: Fujitsu MHZ2320BH G2 ATA 320 GB 8MB Buffer 5400 RPM

  Read the article

• Virtualbox, slow upload speed using nat

  - by user1622094

  Im running Virtualbox on a Ubuntu 12.04 server (host) and I'm running a Windows 7 as guest os. Im using the (virtual) Intel PRO/1000 MT network card. I get good network performance for download using both nat and bridged network settings but upload speed is really slow using nat. I have tied this on tow different servers, one brand new, and one a several years old, both gave the same result. If you can explain this behavior or have ideas of further test I can perform please let me know.

  Read the article

• Can a processor upgrade cause BSOD?

  - by Daniel

  I Had the following hardware setup: Phenom II X4 945 Asus M4A97 4GB DDR2 OCZ Radeon HD5850 OCZ Agility 2 120 GB Windows 7 x64 Pro Fully updated (latest drivers and windows update patches) Then I bought an used Phenom II X6 1090T and installed it without formatting. Since that my computer started BSODing almost every time I'm playing any game and with different error messages, like: page fault in non-paged area bad pool header the video memory manager found a problem error in dxgmm1.sys(or something like that) And when it doesn't BSOD the game simply crashes. I have tried: Updating BIOS Reseting BIOS to defaults Reinstalling Video Drivers Installing the latest DirectX All that's left is to do a full format and I don't want to do that since it's going to be a lot of work to fine tune windows to my preferences again. So is my "new" processor defective or do I really need to format the computer? Update: I use a (properly installed) custom cooler from Coolermaster and both the BIOS and the Open Hardware Monitor(Application) attest the CPU is not overheating, so I guess the CPU its defective and since I bought it from a guy over the Internet I'm probably screwed

  Read the article

• very Slow machine when searching the network

  - by Adam

  Hi We are using a Dell desktop machine with 2 GB RRAM & Pentium D 3.00 GHz. The machine is very slow when using our Sales program and searching over the local network. We have this problem on 2 machine which are the same spec - This one and another. All of our other machine (10) run fast with no issues. Our server is SBS 2008 and AV is AVG. All of our client machines are WinXp Pro SP3 using the latest drivers. Any ideas?

  Read the article

• Print Managment

  - by nardone25

  Hello everyone, I am having a ID10T error LOL,. First I am using window server 2003 r2 edition. I installed on a domian controller print managment. So this is where all 48 printers I have are installed. I just got a new printer. I gave it an IP for the machine and when I head into the server room i tried to add it to the server. I can print a test page, when I am logged on to the print server, but on my client computer when he goes to add a printer in window xp pro the printer isn't listed in add print for network. What did I do wrong?

  Read the article

• Set Up Remote Desktop at Home

  - by Rev

  I'm sure this has been asked before, but I'm unable to find a clear set of instructions. I'm currently using LogMeIn Hamachi to enable Windows 8's Remote Desktop feature on my home computer (running Win8 Pro x64). Unfortunatley, I can't use this method to access my home computer from my Surface Tablet, as I can't install in the Hamachi client. So how can I set up Remote Desktop without using LogMeIn Hamachi? A link to a noob-friendly tutorial would be greatly appreciated. I haven't been able to find anything that I understand (and I am pretty technical, router stuff just stumps me for some reason). EDIT: And I don't want to use a third party service like TeamViewer, in my experience those tools are laggy and quite horrible. The Remote Desktop feature has been excellent.

  Read the article

• full-screen browsing with IE10 on Windows 8

  - by Tom

  I have updated to Windows 8 and got Internet Explorer 10, but I don't get the full screen mode, is just like another desktop app. All links on the Windows Store Apps (Bing, News...) redirect to the old desktop and open my default browser (chrome). I have set IE as default browser but that not solve the problem. I have been looking on the IE10 options but I don't see this option. How can I solve this? Maybe this info help: Windows version: Windows 8 Pro 64 bits Installed Browsers: Firefox, Chrome (default), Opera, IE10 I have seem other people with the same version and is working Edit: Is possible to have IE10 by default for windows 8 apps links and Chrome for Desktop?

  Read the article

• full-screen browsing with IE10 on Windows 8

  - by Tom

  I have updated to Windows 8 and got Internet Explorer 10, but I don't get the full screen mode, is just like another desktop app. All links on the Windows Store Apps (Bing, News...) redirect to the old desktop and open my default browser. I have been looking on the IE10 options but I don't see this option. How can I solve this? Maybe this info help: Windows version: Windows 8 Pro 64 bits Installed Browsers: Firefox, Chrome (default), Opera, IE10 I have seem other people with the same version and is working

  Read the article

• What makes an Apple hard drive special?

  - by Michael Shnitzer

  The Mac Pro has a specific hard drive for sale in the Apple Store for $549.00. The drive has the following specs: Serial ATA 3GB per second 7200 RPM Amazon has a hard drive with the same specs for $169.99. The only difference I can tell is that the Apple hard drive label says it has "Apple HDD Firmware". What exactly is the benefit of this firmware and is there something I am missing that make up for the price difference in these two drives? Update: My initial comparison between the two drive was unfair. Apparently 2TB drives that are 3 GB/S and 7200 RPM are quiet a bit more than $169.99. Dell has a 2 TB SATA Caviar Black from Western Digital that is $319.99, which is closer to Apple's price.

  Read the article

• Network bandwidth usage dashboard?

  - by SkippyFlipjack

  I have a couple of wifi access points hooked up to my home network, one of which I keep unsecured for some development I do; there are only a couple other homes within range and they've got their own wifi so it's not a big concern. I also have a Sonos system, Tivo, Roku, a couple laptops, a couple phones, an iPad and a desktop machine, all of which are internet-smart. So when my internet bandwidth tanks and it takes five minutes to load a YouTube video, I want to know what's going on, and there are many potential culprits. I'd like to be able to plug my MacBook into the primary router and see a nice little dashboard of the units on the network and what kind of bandwidth each is using at that moment. I could figure this out from WireShark or tcpdump but figure there has to be an easier way. I've tried a few different commercial products but none really presented the right info. Suggestions? (This may be a question for superuser since my Apple Time Capsule's SNMP capabilities are limited, but I figure admins of small business networks would have dealt w/ the same issue..)

  Read the article

• How to use HFS formatted pen drive in Windows 7?

  - by row-sun

  I recently used disk utility in my mac book pro to format my 8 GB pen drive to install OS X. After that I formatted my pen drive from disk utility as FAT32 so that I would be able to use it in windows. But in windows the pen drive does not show up. When I right click on my computer and click manage and then disk management, the pen drive is listed there, but it doesn't show up in the explorer and I cant use it. I tried to do many things but I'm still not being able to use it in windows though I can use it in Mac OS X. Could anyone help? Thanks.

  Read the article

• What causes this sonar sound on OS X?

  - by Richard Metzler

  Both of my Macs play this sonar sound that sounds like "ping ping ping ping" with a small amount of delay / echo. It occurs to me that it is played once a day but I'm not sure why. I checked iCal but didn't found anything (I don't use iCal anyways but maybe it's connected to Google calendar or my iPhone). I've heard this sound played by both my MacBook and my iMac but not yet simultaneously. Update This sound is not submarine.aiff. It sounds much more like what skub linked to but there are 4 "pings" instead of 1. It is played at different times (today around 5pm and again at 8.45, but as far as remember not everyday). That's why I'm not sure I could record it, but I could try. The sound might come from my iPhone, though I'm not sure which apps are alowed to play sound when they are not running. Also I don't see any indication in the message center or something similar. I think I have to start taking notes on which apps running.

  Read the article

• How can I fix a computer that is literally too slow to do anything?

  - by fredley

  I'm troubleshooting a Windows 7 PC for a friend. A couple of days ago it started running 'slow'. It turns out 'slow' is about 15 minutes to the first glimpse of the desktop, and another 30 to show icons. It is possible to open Task Manager, and nothing seems awry, CPU usage at 1-5%, plenty of memory free. The machine is clearly infested with malware though, in particular a program called 'Optimizer Pro' is demanding money to 'remove 5102 files slowing down my computer'. This seems highly suspicious. My problem is though, that I can't access msconfig (I left it for a couple of hours after having hopefully typed it into the Start Menu and hit enter - nothing seems to have loaded), or anything at all basically. I can boot from a Linux Live CD, but can I actually do anything useful from there? System Restore hasn't fixed it either, and Safe Mode exhibits the same behavior.

  Read the article

• Password not accepted when resuming from sleep

  - by Comrade

  My HP Pavilion dv-series notebook will not accept the user account password for the logged in user when resuming from sleep - message returned is Incorrect Password. Simply selecting the Switch User option reloads the login screen and allows me to log in as the same user with the same password that was originally rejected. And, yes I've tried it more than one (hundred) times in case you were thinking it's just a case of slippery fingers. Another interesting point is that it appears to be independent of the software running on the machine. Since the issue first appeared, I have done two clean installs where all HD partitions were wiped and new ones created during fresh installation of the OS. The first such clean install was of Ubuntu (Lucid) 10.04 amd-64, the second of Win 7 Pro 64 (from boxed disc and activated post install). Exactly the same symptoms, described above, are exhibited on both platforms. Have engaged in significant amount of Googling an come up empty so any ideas are welcome.

  Read the article

• Can software operation damage an SD card?

  - by Borek

  My SD card has a broken boot sector and the tools I've tried say that it's not repairable (I've tried TestDisk, DriveRestore Pro and Easeus Partition Recovery). The card was in my Android phone and at one point, it simply shut down and I had to reboot it. After I rebooted it, the SD card was not recognized and since then I've tried to recover it (I don't want to format the card as it contains some data I'd like not to lose although it's nothing critical). My question is, can some software error in Android, or a sudden crash of a system, damage the SD card? Or was it the other way around, the card first died and it brought the system down?

  Read the article

• Images not accessible in localhost using wamp in windows 7 [closed]

  - by Am poru

  I Installed wamp in windows 7 pro, and copied a joomla live site. Everything seems working well except that it doesn't load the images on the page. Even when I try to access in directly: localhost/logo.png Im getting an 403 Forbidden: Forbidden You don't have permission to access /logo.png on this server. Solutions I have tried are: 1. Using icacls to grant priviledge 2. manually set the permission by right clicking the image and editing the security. php, html and other files are loading in the browser, but not images. Please help.

  Read the article

< Previous Page | 345 346 347 348 349 350 351 352 353 354 355 356  | Next Page >