Search Results

Search found 9409 results on 377 pages for 'boot loader'.

Page 35/377 | < Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >

• HP Proliant ML115 G5 - Boot order lost after reboot

  - by Filipe YaBa Polido

  I have one HP Proliant ML 115 G5 (AMD) with the latest BIOS (07-06-2009) and recently I've installed an USB disk. This is a common problem on old Proliant servers. When you plug the USB disk, BIOS boot order changes and tries to boot via USB. So, I'll change the BIOS settings and make the SATA disk the default boot device. The problem is, when I need to unplug the usb disk, and plug it again later. I can't be always changing the BIOS settings... How can one solve this for ever?!?!

  Read the article

• Colored blocks on boot

  - by stackzerad

  When my laptop tries to boot right after POST I see colored blocks with flashing symbols in them. I am able to boot from windows PE cd. Tried fixboot and fixmbr with no success. I have also tried replacing boot files (ntldr, io.sys etc..) and removing video card drivers from windows\system32\drivers. The drive is seagate 2.5 ATA 160GB and has one NTFS partition on it. I have already fixed this issue by reformating the drive and reinstalling everything but after couple of weeks I get the same issue again. The diagnostics software shows no bad sectors on it and virus scan didn't find anything. Does anybody have an idea what this might be? UPDATE: tried defragmenting the hard drive just in case, but still no luck

  Read the article

• Cannot boot from a hard drive

  - by Martin Melka

  I have a problem booting from a hdd. I used to have it as my main drive before I bought an SSD, so I had been able to boot from it. But for some reason, now, half a year later, I can't get it to work. I completely erased it, deleting data and partitioning (using EASEUS Partition Master), then I installed Kubuntu (without changing anything in the installer), but it simply won't boot up. It always boots the drive with Windows and when I unplug this drive, it only gives me an error "PXE-E61: Media test failure, check cable", I guess it's trying to boot from LAN. I tried installing the system on a freshly deleted drive, without any other drives plugged in the pc, but the problems persist. This is how the drives look now (first one has Windows 7 installed, the second one Kubuntu): I am lost. I mean, after doing a fresh wipe and a clean install without altering anything, it should work. But it doesn't. What can be wrong here? Thanks

  Read the article

• Ubuntu won't boot, only displays GRUB terminal

  - by Badea Sorin

  I have a problem with my Ubuntu 11.04 installation. I've installed Ubuntu 11.04 from Windows, it worked fine for days, but today it won't boot. When I start the machine, GRUB loads. There is the Windows 7 loader, I select Ubuntu from there and after that, I should see the Ubuntu GRUB menu, where I'd select the mode to boot Ubuntu. However, I can't see that anymore. I directly get to a GRUB terminal. Can anyone help me with this? How would I recover my data or reset the boot loader?

  Read the article

• Howto boot directly into a VirtualBox image?

  - by mawimawi

  I have a running setup as following: Native OS: Windows 7 64bit, 3 Partitions: c: (System) d: (FAT32, here is my vdi file) e: (unformatted) VirtualBox: Fedora 14 running off the vdi file on drive d. Usually this setup is great for me, but sometimes I'd like to run Linux natively, and not inside VirtualBox. Is there a way to boot directly into the vdi file without the Windows overhead? E.g. using a USB stick with some modified Linux Kernel / GRUB that can mount the vdi file directly as "/"? Or copy the contents of my vdi file to the empty partition and somehow use this from VirtualBox (when booting into Windows) AND directly booting into Linux? Hope to get some hints or even howtos.

  Read the article

• Can't boot into XP after setting up dual boot with Win 7 vhd.

  - by bebop

  I set up a dual boot for win 7 from vhd on 2 xp machines. One of them everything went fine, and I get the option to choose the os when I turn the machine on. The other was slightly different in that rather than seeing the current OS disk (the one with XP on) as the c:\ when I was setting up windows 7 vhd during install it saw the disk as d:. I didn't think anything of it and went ahead and created a vhd on the d: drive. Now when I turn this machine on, it boots straight to win7 and I never get the option to choose xp. When I look at the boot option in msconfig, I only see Windows 7. How can I go about adding the old XP drive as a boot option at startup again? Edit: Strangely when I rebooted this time (perhaps the first time since I removed the install DVD) it boots to XP. I suppose I'll just have to reinstall windows 7 again in a new vhd...

  Read the article

• iMac boot from linux partition on external drive

  - by user74757

  I have the following "setup:" iMac (no internal drive/dead) --------- (Firewire) ------- [[MAC OS X]] | | | | (USB) | | | | [[MISC STORAGE PARTITION] [MISC STORAGE PARTITION] [EXT2 UBUNTU PARTITION]] I routinely use the firewire drive to boot MAC OS X. However, I would like to boot from the linux partition of the USB drive. This linux partition had linux installed on it from a live cd, and during that process, I told the installer to install GRUB on the usb drive (which happened to be /dev/sdd). My question is, how do I get this disk to show up during the iMac option-boot? Currently, only the firewire MAC OS X option shows up. I have read about rEFIT, but that appears to install it to the Mac OS X disk (would that still work?)... Also mentioned was installing rEFIT to the internal EFI system partition, but I don't know if that is wise.

  Read the article

• Deleting a partition on dual boot

  - by blade4

  I have split my C:\ physical disk into 3 seperate partitions: C, H, and K. C has my original OS and is the active partition, H has another OS (dual boot), and K has song files. I want to keep the other OS (Windows Server) and when I am in this OS, I can't delete C ("Windows cannot format this partition"). What is the best way for me to get rid of C, keep all the songs intact, and the Server OS partition, so I replace C with another OS, and then get rid of the original Windows Server OS (So revert the dual boot to a single boot).

  Read the article

• Boot from Second SATA Drive

  - by Chris

  I have a Dell Precision 490 Workstation, and I just had my other question answered, Install Ubuntu to drive B without impacting drive A, and now I'm having a boot sequence issue. The external drive is great, boots up fine on my laptop, but how do I tell my desktop to boot from my second SATA drive and not the first SATAdrive. My drive configuration as follows SATA-0: Windows SATA-1: DVDR SATA-2: Ubuntu When I choose the boot menu, the option I have is "Internal Hard Drive". I assume it searches all drives, and loads the first bootable one it finds (which happens to be Windows), but I'd like to be able to select the drive from a list. Has anyone experienced this? Is possible without disabling the first hard drive in the BIOS?

  Read the article

• Ubuntu 6.06 Boot problem

  - by nijikunai

  I tried to boot my pc using ubuntu 6.06 in the live cd mode but it refuses to boot. It throws the error Uncompressing Linux.. ok, booting from kernel [ 54.168828] ACPI Unable to load the System Descriptor Tables The live cd works perfectly okay in other computers. Out of curiosity, I also tried to boot using Slax live cd, It too threw some errors incomplete literal tree invalid compressed format (err=1) UDF-fs: No partition found (1) XFS: bade magic number XFS: SB validate failed Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0) The slax errors are a bit worrying to me. Thanks for the help in advance!

  Read the article

• Windows boot iso file without press any key

  - by gln

  I'm trying to make an iso file which will boot without any key-press from the user. In Windows iso files, when booting from a cd, there is a message "press any key to boot from cd" which will wait for 5-10 seconds and then, if there is no key-press, it will boot from HD. I searched the web for how to remove this message, and do not press any key and all the answers were "delete bootfix.bin" from the iso. I edited the iso (I've tried several iso files) to remove the bootfix.bin, but now the iso is not correct. Do you have any suggestions?

  Read the article

• Doing "text mode 'splash' game" during boot.

  - by Vi

  Sometimes I want to do something (for example, playing a simple text-mode game) while the system is booting up. This is especially useful when lengthy reiserfs transaction replays are happening. Current hacky way of doing it is: Put the program on initramfs. Before running /sbin/init, "openvt 2 /my/program". Turn off messages from kernel (sysrq 0) Override /dev/console with /dev/null (to prevent boot messages). The problems are: There are STILL some messages interfering with program output. I can't see boot messages by switching to that virtual terminal back. After finishing the boot sequence, /dev/tty2 ends up being attached both to getty and my program. How to do it properly without of running graphical splashes? The system is Linux Debian Squeeze, no dependency based sysv scripts.

  Read the article

• dual-boot does not work

  - by elyashiv

  I have a PC with linux-mint installed on it. I wanted to install win-7 along-side, for some reasones. what I have done is: create a bootable USB-stick with Ubontu ios. restarted the computer, this time with Ubuntu (running from my disk-on-key). created a partition on the main HD using GPart. formated the partition to NTFS. restarted the computer, this time through the installation CD for win-7. installed win-7 with normal settings. that all worked, and I'm writing this through win-7. the thing is - when I boot my system, I don't get to choose what OS to run. I checked the settings in msconfig, and in boot label it has just win-7. how can I boot linux?

  Read the article

• Fedora 17 Hangup on Boot (plymouth-quit-wait)

  - by Joe

  I am having an issue after several updates where when I try to boot the boot animation "loads" then flashes with the fedora logo, and then sits there. After checking into it more I found that two services were failing to start. The first is tcsd.service and the second is plymouth-quit-wait.service. I was able to to disable tcsd.service (in the hopes I could boot without it), however I have been unable to do anything to the second service. I am running FC17 and the akmod nvidia drivers, on an ASUSG53SW. Everything is up to date as far as I know. What is the exact problem that I am facing and how can I go about troubleshooting this or fixing it?

  Read the article

• Access boot menu from windows 7

  - by repsak

  I busted my keyboard on my laptop, and now my computer rarely starts since it doesnt ignore this problem when booting. So what i want to do, is to disable my keyboard from the boot menu. But I cant access the boot menu since my keyboard doesnt work. I have an addtional keybaord via USB but that one doesnt work before windows is booted. So in short, what I want is to access my laptops boot menu now when im on windows via cmd, but im not sure how to do it.

  Read the article

• Access boot menu from windows 7

  - by repsak

  I busted my keyboard on my laptop, and now my computer rarely starts since it doesnt ignore this problem when booting. So what i want to do, is to disable my keyboard from the boot menu. But I cant access the boot menu since my keyboard doesnt work. I have an addtional keybaord via USB but that one doesnt work before windows is booted. So in short, what I want is to access my laptops boot menu now when im on windows via cmd, but im not sure how to do it.

  Read the article

• PC won't boot, even into bios

  - by divided

  Here's the deal: I cleaned a hard drive of some viruses (externally) and put it back into the original pc. This hard drive will boot in any other pc except the original pc. When I try other hard drives in the original pc, they are able to boot. The drive has Windows XP. What is the problem? How can I get this hard drive to work properly? The original hard drive works in other PCs. The PC boots with other hard drives acting as the master. If I boot with no hard drive, I still can't get into the BIOS These are all IDE hard drives The PC doesn't beep, it just boots into a black screen with a cursor blinking in the upper left of the screen

  Read the article

• Can I prevent an IDENTIFY PACKET DEVICE command to a specific device at boot?

  - by Brian Spisak

  This is related to a previous question related to installation that is now resolved. I'm opening a new question, because I still need to get my DVD drive working. Problem: Failed boot when my ASUS DRW-24B1/ST DVD drive is attached to my asmedia ASM1061. Symptom: ata8.00: exception Emask 0x52 Sact 0x0 SErr 0xffffffff action 0xe frozen ata8: SError: { blah blah } ata8.00: failed command: IDENTIFY PACKET DEVICE ata8.00: cmd blah blah res blah blah (ATA bus error) ata8.00: status: { DRDY } ata8: hard resetting link Background: The ASM1061 is a PCIe to SATA bridge providing 2 x 6Gb/s ports and is supposed to be fully compliant to SATA specs. I just discovered in the fine print of my ASUS P8Z77-V pro motherboard that "These SATA ports are for data hard drivers only. ATAPI devices are not supported." However, I have already installed Windows 7 using this drive and I can run the Ubuntu 12.04 installer from it as well. The only time I have a problem is during Ubuntu boot when it tries an IDENTIFY PACKET DEVICE which seems to be an ATAPI command. I can't simply switch this device to another SATA port because they are already allocated to other devices. (My chipset's 2 x 6Gb/s are connected to my boot SSD and a fast HDD while the 4 x 3Gb/s ports are running a RAID 5 array.) If this can't be fixed or worked around, I suppose I'll have to go buy SATA add-in card. Blech. Thoughts: If indeed this is a device specific issue (that it doesn't support ATAPI discovery) then I can't expect - is it udev? - to work with it. But, it seems that Windows and even the Ubuntu installer work just fine. So why does udev have a problem? At the end of the day, it would be nice to have the DVD working under Ubuntu, but I can live without it. But, as this is a dual-boot machine, I can't physically disconnect it because I want it to work with Windows. (And physically disconnecting it every time I want to boot Ubuntu is NOT an option. ;-) Questions: Should this be considered a bug? My feelings are that if it works with other OS that it should probably work with Ubuntu as well. How can I work around this problem? I have a limited knowledge of linux internals, but it seems I should be able to somehow tell udev (or whatever is doing the discovery) to ignore that device. Is there a way?

  Read the article

• Dual booting windows 8/ubuntu 12.04. Grub doesn't appear and machine never boot in ubuntu

  - by black sensei

  i got a new ACER predator AG3620-UR308 which came with windows 8, so i wanted to run ubuntu 12.04.2 on it as a dual booting. To be honest, i've been doing dual booting for a while now so, i did the right thing. the box came with 2TB HDD. so i made 4 partitions with a raw partition just after the windows installation partition I always do manual installation so even if ubuntu didn't detect windows 8, it was ok for me. So i created swap area and finished the installation etc....Grub was install on the only drive there which is sda. After reboot, grub doesn't even come up.So it always boot in windows 8. I did repeat the installation process twice and yield same result. which is weird because this method always works for me so far.Even the laptop am using to write this post is a dual booting windows 7/ mint nadia installed the same way. Is there anything new in windows 8 that i didn't make provision for? Before starting the installation, all i read about was that , windows 8 should be installed first and ubuntu after. I went ahead and disable secure boot from the BIOS and enabled CSM (don't even know what it means) according to Acer custhelp site . I boot from USB and did fdisk -l bellow is the result: ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x8c361cb5 Device Boot Start End Blocks Id System /dev/sda1 1 3907029167 1953514583+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdb: 8178 MB, 8178892800 bytes 255 heads, 63 sectors/track, 994 cylinders, total 15974400 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0006a87e Device Boot Start End Blocks Id System /dev/sdb1 * 2048 15972351 7985152 b W95 FAT32 ubuntu@ubuntu:~$ Can anybody shed some light? thank you in advance

  Read the article

• Rackspace Ubuntu 12.04 server stuck in initramfs after kernel upgrade

  - by Znarkus

  Can't boot after I did a aptitude full-upgrade and let it update menu.lst (did a diff first and it looked good). This is what I've done so far in the BusyBox shell: mkdir /tmp/xvda1 mount /dev/xvda1 /tmp/xvda1 chroot /dev/xvda1 nano /boot/grub/menu.lst This file looks like this: title Ubuntu 12.04.1 LTS, kernel 3.2.0-31-virtual root(hd0,0) kernel /boot/vmlinuz-3.2.0-31-virtual root=UUID=/dev/xvda1 ro quiet splash initrd /boot/initrd.img-3.2.0-31-virtual title Ubuntu 12.04.1 LTS, kernel 3.2.0-31-virtual (recovery mode) root(hd0,0) kernel /boot/vmlinuz-3.2.0-31-virtual root=UUID=/dev/xvda1 ro single initrd /boot/initrd.img-3.2.0-31-virtual titleUbuntu 12.04.1 LTS, kernel 3.2.0-24-virtual root(hd0,0) kernel/boot/vmlinuz-3.2.0-24-virtual root=UUID=/dev/xvda1 ro quiet splash initrd/boot/initrd.img-3.2.0-24-virtual titleUbuntu 12.04.1 LTS, kernel 3.2.0-24-virtual (recovery mode) root(hd0,0) kernel/boot/vmlinuz-3.2.0-24-virtual root=UUID=/dev/xvda1 ro single initrd/boot/initrd.img-3.2.0-24-virtual titleUbuntu 12.04.1 LTS, kernel 3.2.0-24-generic root(hd0,0) kernel/boot/vmlinuz-3.2.0-24-generic root=UUID=/dev/xvda1 ro quiet splash initrd/boot/initrd.img-3.2.0-24-generic titleUbuntu 12.04.1 LTS, kernel 3.2.0-24-generic (recovery mode) root(hd0,0) kernel/boot/vmlinuz-3.2.0-24-generic root=UUID=/dev/xvda1 ro single initrd/boot/initrd.img-3.2.0-24-generic titleChainload into GRUB 2 root(hd0,0) kernel/boot/grub/core.img titleUbuntu 12.04.1 LTS, memtest86+ root(hd0,0) kernel/boot/memtest86+.bin From what I remember, the upgrade added the UUID= string. Should I remove these? Or rather, how do I get my system back online again? Thanks. Update: Seems like I can't even edit the file. [ Error writing /boot/grub/menu.lst: Read-only file system ]

  Read the article

• Problem filling Django template in googleappengine Loader

  - by googleappenginenewbie

  I am trying to test a googleapengine project locally, but am getting errors loading templates: My settings.py contains TEMPLATE_LOADERS with Loader wrappers: e.g. django.template.loaders.filesystem.Loader but there is no Loader wrapper class in the bundled filesystem.py file within xx/google_appengine/lib/django/django/template/loaders/ so I'm getting this error: Exception Type: ImproperlyConfigured Exception Value: Module "django.template.loaders.filesystem" does not define a "Loader" callable template source loader Exception Location: in xxxx/google_appengine/lib/django/django/template/loader.py in find_template_source, line 60

  Read the article

• How do I free up more space in /boot?

  - by user6722

  My /boot partition is nearly full and I get a warning every time I reboot my system. I already deleted old kernel packages (linux-headers...), actually I did that to install a newer kernel version that came with the automatic updates. After installing that new version, the partition is nearly full again. So what else can I delete? Are there some other files associated to the old kernel images? Here is a list of files that are on my /boot partition: :~$ ls /boot/ abi-2.6.31-21-generic lost+found abi-2.6.32-25-generic memtest86+.bin abi-2.6.38-10-generic memtest86+_multiboot.bin abi-2.6.38-11-generic System.map-2.6.31-21-generic abi-2.6.38-12-generic System.map-2.6.32-25-generic abi-2.6.38-8-generic System.map-2.6.38-10-generic abi-3.0.0-12-generic System.map-2.6.38-11-generic abi-3.0.0-13-generic System.map-2.6.38-12-generic abi-3.0.0-14-generic System.map-2.6.38-8-generic boot System.map-3.0.0-12-generic config-2.6.31-21-generic System.map-3.0.0-13-generic config-2.6.32-25-generic System.map-3.0.0-14-generic config-2.6.38-10-generic vmcoreinfo-2.6.31-21-generic config-2.6.38-11-generic vmcoreinfo-2.6.32-25-generic config-2.6.38-12-generic vmcoreinfo-2.6.38-10-generic config-2.6.38-8-generic vmcoreinfo-2.6.38-11-generic config-3.0.0-12-generic vmcoreinfo-2.6.38-12-generic config-3.0.0-13-generic vmcoreinfo-2.6.38-8-generic config-3.0.0-14-generic vmcoreinfo-3.0.0-12-generic extlinux vmcoreinfo-3.0.0-13-generic grub vmcoreinfo-3.0.0-14-generic initrd.img-2.6.31-21-generic vmlinuz-2.6.31-21-generic initrd.img-2.6.32-25-generic vmlinuz-2.6.32-25-generic initrd.img-2.6.38-10-generic vmlinuz-2.6.38-10-generic initrd.img-2.6.38-11-generic vmlinuz-2.6.38-11-generic initrd.img-2.6.38-12-generic vmlinuz-2.6.38-12-generic initrd.img-2.6.38-8-generic vmlinuz-2.6.38-8-generic initrd.img-3.0.0-12-generic vmlinuz-3.0.0-12-generic initrd.img-3.0.0-13-generic vmlinuz-3.0.0-13-generic initrd.img-3.0.0-14-generic vmlinuz-3.0.0-14-generic Currently, I'm using the 3.0.0-14-generic kernel.

  Read the article

• Why is my root filesystem always scanned at boot?

  - by luri

  I always have a pause at boot saying my filesystems are being checked (with a "press C to cancel" note, too). Actually (seeing boot.log) I think it's the / fs, which is located at /dev/sdb5 Several questions altoghether, here (hope this does not break any rule): Is this normal? Can I (or even should I) prevent this anyhow? According to boot.log (below) the fs does not seem to be 'clean', or, at least, it's in an state or condition that makes fsck always can it for errors for a while (just a few seconds). How can I fix it? Edit: This is my boot.log: fsck desde util-linux-ng 2.17.2 udevd[515]: can not read '/etc/udev/rules.d/z80_user.rules' /dev/sdb5: 249045/32841728 ficheros (0.3% no contiguos), 20488485/131338752 bloques init: ureadahead-other main process (1111) terminated with status 4 init: ureadahead-other main process (1116) terminated with status 4 Password: * Starting AppArmor profiles [160G Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox [154G[ OK ] * Setting sensors limits [160G [154G[ OK ] And this is dumpe2fs results for the filesystem being checked (well, the relevant part of the log): Filesystem volume name: <none> Last mounted on: / Filesystem UUID: 42509bf9-f3e6-460a-8947-ec0f5c1fbcc8 Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype needs_recovery extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: (none) Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 32841728 Block count: 131338752 Reserved block count: 6566937 Free blocks: 110850356 Free inodes: 32592701 First block: 0 Block size: 4096 Fragment size: 4096 Reserved GDT blocks: 992 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8192 Inode blocks per group: 512 Flex block group size: 16 Filesystem created: Fri Dec 10 19:44:15 2010 Last mount time: Mon Feb 14 17:00:02 2011 Last write time: Mon Feb 14 16:59:45 2011 Mount count: 1 Maximum mount count: 33 Last checked: Mon Feb 14 16:59:45 2011 Check interval: 15552000 (6 months) Next check after: Sat Aug 13 17:59:45 2011 Lifetime writes: 331 GB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 First orphan inode: 28049496 Default directory hash: half_md4 Directory Hash Seed: d3d24459-514b-4413-b840-e970b766095b Journal backup: inode blocks Journal features: journal_incompat_revoke Tamaño de fichero de transacciones: 128M Journal length: 32768 Journal sequence: 0x0005e0c4 Journal start: 1 This is the relevant (at least I think this is the fs being checked) line in fstab: #Entry for /dev/sdb5 : UUID=42509bf9-f3e6-460a-8947-ec0f5c1fbcc8 / ext4 errors=remount-ro 0 1

  Read the article

• Hibernate between OS X and Bootcamp Win 7

  - by Willem

  Wouldn't it be great if someone wrote a guide or an app which allowed you to switch instantly between OS X and Windows using Hibernate in both OS:s? Windows 7 already has an option "Hibernate" which allows you to boot back to your OS X partition, but OS X does not exactly offer the same. However, there are possibilities here. It seems that the recent Mac's have 3 different kinds of sleeping mode: Sleep: Low power consumption, RAM still active. Legacy Safe Sleep: No power consumption(?), writes RAM to disk and shuts down (is this the same as Hibernate?) Safe Sleep: Writes RAM to disk and enters sleep mode. If battery level drops too low it goes into Hibernate (is this Hibernate the same as #2 in this list? This is the Hibernate I will be referring to int he rest of this post) It seems that I am unable to force my MacBook Pro (Late 2011) OS X 10.7.3 into a true hibernate using either command line or apps that are supposed to do this. I believe the Mac should show that white loading bar whilst waking up if it was truly put into hibernate (which it does not). But I can get this white bar to show by letting my battery level drop to 0% so there is obviously a system function for it (obviously, duh! :). When Win 7 goes into hibernate it shuts down completely and you can then boot into OS X on startup. On OS X however, hibernate forces you to wake up into OS X. Can you hack this so that you're allowed to select boot partition after OS X hibernates? Would it be possible to use the true hibernate system functionalities of Win 7 and OS X to create a kind of instant switching between the two? Imagine this on a quick SATA-3 SSD like my 180GB Intel 520. Thanks / Willem

  Read the article

• How to recover missing folders in a Windows-Ubuntu dual-boot system?

  - by UnhappyGhost

  I have Windows 7 and Ubuntu 12.04 as dual-boot and on the same 500GB HDD. I have partitioned the drive into NTFS file system from Windows before I installed Edubuntu 12.04 in the remaining free space. Now, there is a drive(G:) accessible through Windows and has few folders. I boot into Edubuntu and create a folder "LinTor" and download movies and few software from torrentz. Before I download, it showed 49GB free out of 62GB. After all the downloads it showed 31GB free out of 62GB. Then I boot into Windows and I couldn't find this "LinTor" folder. I wondered that might be happening as I hibernate Edubuntu (using sudo pm-hibernate) and then boot into Windows. I then create another folder in the same drive(G:) with the name "001" to check if this was accessible from Edubuntu. Now I reboot into Edubuntu to find that "LinTor" folder has disappeared and "001" folder wasn't showing up either. Surprisingly, the drive size still shows 31GB free out of 62GB but when I check it from Windows, it shows 49GB free of 62GB. There is one thing I would like to mention. When I was trying to unmount the NTFS drive(G:) from Edubuntu before booting into Windows, it prompted me with this message: Do you want to empty the trash before you unmount the drive? Once the trash is emptied the data is permanently deleted and cannot be recovered. Please help me understand what could be the problem and how do I recover the missing folder?

  Read the article

< Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >