Search Results

Search found 7065 results on 283 pages for 'cpu sockets'.

Page 35/283 | < Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >

  • AMD Unleashes Six-Core Desktop CPU

    <b>Hardware Central:</b> "AMD today announced the availability of a new six-core desktop processor and platform to accompany it, which includes a new chipset and support for hobbyists who like to tweak their processors to the limits of their heat sink and warranty."

    Read the article

  • High load (and high temp) with idle processes

    - by Nanne
    I've got a semi-old laptop (toshiba satellite a110-228), that's appointed 'laptop for the kids' by my sister. I've installed ubuntu netbook (10.10) on it because of the lack-of memory and it seems to work fine, accept from some heat-issues. These where never a problem under windows. It looks like I've got something similar to this problem: Load is generally 1 or higher, sometimes its stuck at 0.80, but its way to high. Top/htop only show a couple of percentage CPU use (which isn't too shocking, as i'm not doing anything). At this point all the software is stock, and i'd like to keep it that way because its supposed to be the easy-to-maintain kids computer. Now I'd like to find out: What could be the cause of the high load? Could it be as this thread implies, some driver, are there other options to check? How could I see what is really keeping the system hot and bothered? How to check what runs, etc etc? I'd like to pinpoint the culprint. further steps to take for debugging? The big bad internet leads me to believe that it might be the graphics drivers. The laptop has an Intel 945M chipset, but that doesn't seem to be one of the problem childs in this manner (I read a lot abotu ATI drivers that need special isntall). I'd not only welcome hints to directly solve this (duh) but also help in starting to debug what is going on. I am really hesitant in installing an older kernel, as I want it to be stock, and easy upgradeable (because I don't live near it, it should run without me ;) ) As an afterthought: to keep the whole thing cooler, can I 'amp up' the fancontrol? Its only going "airplane" mode when the computer is 95 Celcius, which is a tad late for my taste. Top: powertop:

    Read the article

  • Ubuntu doesn't load, can't even open a terminal to type commands, even after boot repair

    - by Sky
    When I start Ubuntu I only get my desktop picture and am unable to open a terminal to type any commands. When I try a Guest session all I get is a red Ubuntu backdrop, nothing else. I tried boot repair but no improvement. Summary information following boot repair: http://paste.ubuntu.com/8109809/ I can paste some of it here if someone can tell me which part of it is relevant. This all occurred after I tried to remove compizconfig (which I might not have completed), because it's been using up my CPU (running at 50-60% with compiz at the top in System monitor. My laptop has been running very slow since installing Ubuntu so I've been trying to fix that, also website videos play slow and the startup of Ubuntu has been faulty. I also installed a proprietory Nvidia driver (304) before this launcher issue occurred, in an effort to fix my video problem (didn't help anything). Laptop is Dell 620m with Intel Core 2; 1.83GHz, 2 GB RAM, Ubuntu 14.04 (new to Linux); 66GB Ubuntu partition. Everything works fine on the small XP partition of my laptop, but I've moved all my files to the larger Ubuntu portion. I wanted to try some answers I found to similar questions but they all seem to involve commands in a terminal and I can't open a terminal. How can I get the launcher back, along with access to my programmes etc? Thank you for any help.

    Read the article

  • How do I throttle a command in a terminal window?

    - by To Do
    I needed to run convert with a lot of images at the same time. The command took quite a while but this doesn't bother me. The issue is that this command rendered my computer unusable while the command was running (for about 15 minutes). So is it possible to throttle the command by limiting resources (processor and memory) to the command, directly from the command line? This can only work if I add something to the same line before pressing Enter because once I start the process the computer slows so much that it is impossible for example to switch to "System monitor" and reduce priority. Edit: top and iotop results I managed to run top and sudo iotop >iotop.txt while doing one of these convert operations. (The iotop.txt file produced is difficult to read) Results of top: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 14275 username 20 0 4043m 3.0g 1448 D 7.0 80.4 0:16.45 convert Results of iotop: [?1049h[1;24r(B[m[4l[?7h[?1h=[39;49m[?25l[39;49m(B[m[H[2JTotal DISK READ: 1269.04 K/s | Total DISK WRITE:[59G0.00 B/s (B[0;7m TID PRIO USER DISK READ DISK WRITE SWAPIN(B[0;1;7m IO(B[0;7m COMMAND [3;2H(B[m2516 be/4 username 350.08 K/s 0.00 B/s 0.00 % 0.00 % zeitgeist-datahub 7394 be/4 username 568.88 K/s 0.00 B/s 77.41 % 0.00 % --rendere~.530483991[5;1H14275 idle username 350.08 K/s 0.00 B/s 37.49 % 0.00 % convert S~f test.pdf[6;2H2048 be/4 root[6;24H0.00 B/s 0.00 B/s 0.00 % 0.00 % [kworker/3:2] [5G1 be/4 root[7;24H0.00 B/s 0.00 B/s 0.00 % 0.00 % init Furthermore, even after the process ends, the computer does not return to the previous performance. I found a way around this by running sudo swapoff -a followed by sudo swapon -a

    Read the article

  • Communication protocols in UDP

    - by Betamoo
    After many hours, I have discovered that the given udp server needs the following steps for a successful communication: 1- Send "Start Message" on a given port 2- Wait to receive from server on any port 3- Then the port dedicated to you to send further data to the server equals the port you have received on it + 1 So I am asking if this kind is a known protocol/handshaking, or it is only special to this server?? PS: All above communication were in udp sockets in C# PS: Related to a previous question: http://stackoverflow.com/questions/2757868/about-c-udp-sockets Thanks

    Read the article

  • Low FPS in some games, but hardware not fully used

    - by Mario De Schaepmeester
    I just did a little funny experiment in the game/sim "Train Simulator 2013". I normally have good FPS in it (around 30) at full settings. What I did was make a really, really long train so that the calculations the sim needed to make were enormous (the sim is quite realistic, it takes all things into account like speed/acceleration, G-forces, comfort levels, possible wheel slip and many more, and most of those things on each carriage seperately). This resulted in only 14FPS as reported by the game, but it felt more like 8FPS or so. I have a Logitech G15 keyboard which has an LCD, and it allows me to monitor CPU/RAM and video card load on it. The strange thing is, all CPU cores were busy, but the total load was only about 60% maximum at all times. The video card was only on 30% load (possibly an important note, the memory was full, which is however not unusual for the game in question). The RAM had plenty of room and there weren't many operations as it didn't grow or shrink much. I just have the feeling that the game would run smoother if it used more of my hardware power. Why is it not doing so? I had the same in another game, The Elder Scrolls: Morrowind when using more than 100 mods (that all use scripting) and a few high res texture mods, + a full-on graphics improvement program. The engine is very old (2003), and so I thought this might be the cause (not being optimised for multithreading). I had thought of possible causes, like: The operating system doesn't let the games use all the resources. It doesn't make use of multi-threading appropriately. To eliminate the former, I tried a CPU stress tool and that got 100% CPU juice as I let it run, so the OS is not the problem. I gave its thread the "higher" priority though. My actual question In both games, I did things the engine was not really built to do or support. Can those games' framerate be limited cause of their own engine not being able to cope? What is the real reason and more importantly, can I help it? And in any case, could something actually be wrong with my hardware? It's all reasonably new, a couple of months, and I (almost) never experience any other trouble. Modern and much more demanding games work absolutely fine. Specs CPU: AMD Phenom II 965 X4 @ 3.4gHz RAM: 8GB of DDR3 RAM Video: MSI GTX560 (nVidia chip) with 1GB of GDDR5 memory OS: Windows 7 Ultimate 64 bit Nothing overclocked.

    Read the article

  • Javascript: Writing a firefox extension with sockets

    - by Johnny Grass
    I need to write a firefox extension that creates a server socket (I think that's what it's called) and returns the browser's current url when a client application (running on the same computer) sends it a request. The thing is that I have no Java/Javascript background at all and I'm pressed for time so I am trying to hack something together from code samples. So far I've been mildly successful. I've been working with code from this question which is used in the open source Firefox exension PolyChrome I have the following code: var reader = { onInputStreamReady : function(input) { var input_stream = Components.classes["@mozilla.org/scriptableinputstream;1"] .createInstance(Components.interfaces.nsIScriptableInputStream); input_stream.init(input); input_stream.available(); var request = ''; while (input_stream.available()) { request = request + input_stream.read(512); } var checkString = "foo" if (request.toString() == checkString.toString()) { output_console('URL: ' + content.location.href); } else output_console("nothing"); var thread_manager = Components.classes["@mozilla.org/thread-manager;1"].getService(); input.asyncWait(reader,0,0,thread_manager.mainThread); } } var listener = { onSocketAccepted: function(serverSocket, clientSocket) { output_console("Accepted connection on "+clientSocket.host+":"+clientSocket.port); input = clientSocket.openInputStream(0, 0, 0).QueryInterface(Components.interfaces.nsIAsyncInputStream); output = clientSocket.openOutputStream(Components.interfaces.nsITransport.OPEN_BLOCKING, 0, 0); var thread_manager = Components.classes["@mozilla.org/thread-manager;1"].getService(); input.asyncWait(reader,0,0,thread_manager.mainThread); } } var serverSocket = Components.classes["@mozilla.org/network/server-socket;1"]. createInstance(Components.interfaces.nsIServerSocket); serverSocket.init(9999, true, 5); output_console("Opened socket on " + serverSocket.port); serverSocket.asyncListen(listener); I have a few questions. So far I can telnet into localhost and get a response, but my string comparison in the reader seems to fail even if I enter "foo". I don't get why. What am I missing? The sample code I'm using opens up a console window and prints output when I telnet into localhost. Ideally I would like the output to be returned as a response when the client sends a request to the server socket with a passphrase. How do I go about doing that? Is doing this a good idea? Does it create security vulnerabilities on the computer? How can I block connections to the socket from other computers? What is a good place to read about javascript sockets? My google searches have been pretty fruitless but then maybe I'm not using the right keywords.

    Read the article

  • What does it mean to flush a socket?

    - by User4748402
    I don't really know much about sockets except how to read and write to them as if they were files. I know a little about using socket selectors. I don't get why you have to flush a socket, what's actually happening there? The bits just hang out somewhere in memory until they get pushed off? I read some things online about sockets, but it's all very abstract and high level. What's actually happening here?

    Read the article

  • Unexplained CPU and Disk activity spikes in SQL Server 2005

    - by Philip Goh
    Before I pose my question, please allow me to describe the situation. I have a database server, with a number of tables. Two of the biggest tables contain over 800k rows each. The majority of rows are less than 10k in size, though roughly 1 in 100 rows will be 1 MB but <4 MB. So out of the 1.6 million rows, about 16000 of them will be these large rows. The reason they are this big is because we're storing zip files binary blobs in the database, but I'm digressing. We have a service that runs constantly in the background, trimming 10 rows from each of these 2 tables. In the performance monitor graph above, these are the little bumps (red for CPU, green for disk queue). Once ever minute we get a large spike of CPU activity together with a jump in disk activity, indicated by the red arrow in the screenshot. I've run the SQL Server profiler, and there is nothing that jumps out as a candidate that would explain this spike. My suspicion is that this spike occurs when one of the large rows gets deleted. I've fed the results of the profiler into the tuning wizard, and I get no optimisation recommendations (i.e. I assume this means my database is indexed correctly for my current workload). I'm not overly worried as the server is coping fine in all circumstances, even under peak load. However, I would like to know if there is anything else I can do to find out what is causing this spike? Update: After investigating this some more, the CPU and disk usage spike was down to SQL server's automatic checkpoint. The database uses the simple recovery model, and this truncates the log file at each checkpoint. We can see this demonstrated in the following graph. As described on MSDN, the checkpoints will occur when the transaction log becomes 70% full and we are using the simple recovery model. This has been enlightening and I've definitely learned something!

    Read the article

  • django, mod_wsgi, MySQL High CPU - Problems

    - by Red Rover
    Good Evening, and thank you for reading this post. I am having a problem with Django after migrating the dB from SQLlite to MySQL. Initially, for the first 48hours, all ran well. But now we are experiencing high cpu about every 30 minutes. This is a production ESX4i VM host, with 2 x 2.8 ghz CPUs and 12 GB ram. I have allocated 4 cpu's to this VM and 4 GB memory. Any insight into this configuration and help with the spikes in CPU would be appreciated. IT is configured to use the prefork MPM. Outlined are the config's for the different services: MySQL Server version: 5.1.61 Source distribution Django 1.3 mod_wsgi Apache/2.2.15 httpd.conf Timeout 120 KeepAlive Off MaxKeepAliveRequests 400 KeepAliveTimeout 3 prefork MPM StartServers 8 MinSpareServers 8 MaxSpareServers 16 ServerLimit 40 MaxClients 40 MaxRequestsPerChild 0 worker MPM StartServers 16 MaxClients 1024 MinSpareThreads 64 MaxSpareThreads 256 ThreadsPerChild 64 MaxRequestsPerChild 10240 MySQL my.conf [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql symbolic-links=0 [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid my.cnf wsgi.conf LoadModule wsgi_module modules/mod_wsgi.so /etc/httpd/conf.d/wsgi.conf WSGISocketPrefix /var/run/wsgi WSGIPythonEggs /var/tmp WSGIDaemonProcess SITE maximum-requests=10000 WSGIProcessGroup SITE

    Read the article

  • CPU / Affinity mask problem in SQL 2005

    - by Robert Moir
    Hi folks, Having a problem with a SQL Server which was virtualised. The CPU mask was set on the physical host for some reason and now advanced options are not available. So I need to reconfigure the CPU affinity mask settings - which are advanced options, so this is blocked because of the affinity mask issue. I've tried doing this from the SQL server in single user command line mode, I've googled and found lots of people with similar problems but no real solution. I'm stumped. Any ideas? Sample commands and output from query analyser below. sp_configure 'show advanced options', 1 GO RECONFIGURE WITH OVERRIDE GO sp_configure 'affinity mask', 0x00000000 GO RECONFIGURE GO ----------------------------------------- Configuration option 'show advanced options' changed from 0 to 1. Run the RECONFIGURE statement to install. Msg 5832, Level 16, State 1, Line 1 The affinity mask specified does not match the CPU mask on this system. Msg 15123, Level 16, State 1, Procedure sp_configure, Line 51 The configuration option 'affinity mask' does not exist, or it may be an advanced option.

    Read the article

  • Apache process consumes too much CPU

    - by Niro
    I have an ubuntu apache/php server running php doing appx 100 hits/sec and a PHP cron running in the background. I get occasionally high CPU load on one of the Apache processes which stays high regardless of traffic or cron activity. It seems to me that its stuck in some kind of loop or something. Below you will find the top and strace info. How can I find where the bad code is and what causes this? top - 14:45:24 up 3 days, 3:38, 1 user, load average: 5.10, 5.88, 5.85 Tasks: 163 total, 5 running, 158 sleeping, 0 stopped, 0 zombie Cpu(s): 47.8%us, 18.5%sy, 0.0%ni, 10.2%id, 0.0%wa, 0.0%hi, 1.8%si, 21.6%st Mem: 7885012k total, 3858484k used, 4026528k free, 177444k buffers Swap: 0k total, 0k used, 0k free, 1037868k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 10736 www-data 20 0 769m 559m 478m R 69 7.3 29:08.30 apache2 10844 www-data 20 0 824m 601m 492m S 17 7.8 4:37.90 apache2 1016 root 20 0 242m 25m 4628 S 6 0.3 162:07.93 scalarizr 9030 www-data 20 0 879m 619m 492m S 4 8.0 5:06.82 apache2 20216 www-data 20 0 747m 228m 170m S 4 3.0 0:01.94 apache2 10807 www-data 20 0 814m 584m 492m S 3 7.6 4:54.10 apache2 10455 www-data 20 0 831m 574m 492m S 3 7.5 4:32.65 apache2 10495 www-data 20 0 849m 592m 492m S 3 7.7 4:41.10 apache2 10884 www-data 20 0 840m 581m 492m S 3 7.6 4:25.06 apache2 ^CProcess 10736 detached % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 74.55 0.148052 1 109755 gettimeofday 25.36 0.050370 0 164634 clock_gettime 0.09 0.000178 0 54878 poll ------ ----------- ----------- --------- --------- ---------------- 100.00 0.198600 329267 total root@ec2-67-202-54-36:~# ^C

    Read the article

  • How CPU communicates with HW

    - by b-gen-jack-o-neill
    Good day. I am new here, but I could not find answer to my question using google, so I help I do not violate any rules. So, basically, all I want to ask is, how CPU comminucates with other HW, such as printers, Graphic card, sound card, LAN card etc. I know, that for basic system I/O, you can use BIOS interrupts. INT 10h I believe is for display output. But, what I would like to know is, what actually happens when you execute instruction int 10h. From desription of int instruction, it should jump to routine, which is stored on adress pointed by adress stored in iterrupt table. But how does this routine get into the RAM? Does BIOS save that routines to the RAM? And what actually that routine does? I mean, CPU can only acess RAM, right? So how can now acess some other HW? Is there some special instrucion for it? Or is CPU somehow connected to BIOS, and than BIOS actually does the work? And the last thing, does even OS like Windows or GNU/Linux use BIOS interrupts, or can OS acess HW directly? Thanks.

    Read the article

  • ASP.NET Session State SQL Server 2008 R2 Freezes with High CPU Usage

    - by jtseng
    Our ASP.Net website uses SQL Server as the session state provider. We currently host the database on SQL Server 2005 since it does not play well on 2008 R2. We would like to know why, and how to fix it. hardware setup Our current session state server has SQL Server 2005 with the files hosted on a single local disk. It is one of our oldest servers since it has served us well, and we never felt the need to upgrade it. The database is about 2 GB holding 6000 sessions. (The sessions are a little big, but we need it.) We have another server with SQL Server 2008 R2 with a much faster CPU, much more RAM, and a much faster hard disk. situation One day, we have a huge surge in traffic. The transaction log growth on SQL Server freezes the server for 10's of seconds, allowing only a few requests through in minutes. So we load up the new server with ASPState with very large data and log files and point all of our applications to the new server. It chugs along fine for about 5 minutes, and then the CPU usage jumps up to 50% of the 16 cores that Standard Edition can use and freezes for 10's of seconds at a time. The files do not record any autogrowth events. The disk queue is nice and low. RAM usage is low. CPU usage on our old server has never been higher than 5%. What happened on the new server? Alternatively, I would like to hear success stories with ASP.NET session state server running on SQL Server 2008 R2 with an average write load of 30MB/sec with bursts up to 200MB/sec.

    Read the article

  • Apache/Passenger and cpulimit

    - by Dave Smylie
    I run a ruby on rails site that processes email - the email is dumped directly into the web app via a POST from postfix. At times I can get a burst of email coming in causing a prolonged surge in CPU usage making my VPS provider understandable unhappy with me. These emails don't need to be processed in a timely manner - they just need to be (eventually) processed. Obviously I can't just nice the process as that only looks at the cpu usage on my VPS and can't take into account the cpu usage on the other VPS's. I have found a utility called cpulimit that will you put hard limits on cpu usage for a particular process. (eg 20%). This seems ideal for this purpose, but I can't work out to integrate with apache/passenger. Passenger starts up a ruby process for each server and restarts them periodically. Each time the pid will change. Cpulimit needs to be given a pid number for it to act on. Anyone got any ideas how I could get passenger to fire off a call this command when it's starting up this particular virtual host?

    Read the article

  • Computer locking up, looking for bootable hardware diagnostic tool.

    - by Carl Menke
    Well today I helped my friend build a computer. All went pretty well until we got to installing Win7. Thing is, we thought, it was crashing constantly. I adjusted pretty much every setting in the BIOS and removed as much hardware as possible to try and prevent a crash. No dice. So far I've tried running an Ubuntu live cd without the harddrive installed. Nope, crashed on boot. And then I just tried Microsoft's ram utility disk and it eventually locked up on that (the ram passed though). So it seems to me like it's either the CPU (AMD PhenomII x3) or the motherboard that could be bad, but I don't know how to test them individually for problems. I thought it could be a overheating issue, but the BIOS reports that the CPU temp is fine idling around 34C. Any advice or diagnostic disk that could help me out? TL;DR: Computer locks up frequently during use (cannot even boot/install an operating system), memory is fine, probably CPU or Mobo, BIOS says CPU temps are fine. What should I try?

    Read the article

  • Very high-pitched noise when computer does something intense?

    - by Starkers
    "Intense" is the best word I can use to describe it because I'm not sure what it is, whether it's RAM, GPU or CPU. If I pan the camera in unity: A high pitched noise issues from the computer. The picosecond I start panning the sound starts. Stops the picosecond I stop panning. If I start an infinite loop: 2.0.0p247 :016 > x = 1 => 1 2.0.0p247 :017 > while x < 2 do 2.0.0p247 :018 > puts 'huzzah!' 2.0.0p247 :019?> end huzzah! huzzah! huzzah! An identical high pitched noise can be heard. I don't think it's the GPU due to this simple experiment. Or any monitor-weirdness (although the sound does sound like one of those old CRT monitors if you're old enough to be young when those things were about) The CPU? Or maybe my SSD? It's my first SSD and the first time I've heard this noise. Should I be worried? Regardless, what's causing this sound? I can't think what would cause such high frequency vibrations. I built the PC myself. Not enough heat paste on the CPU? Too much? Just no idea what's going on. Info: CPU Type QuadCore Intel Core i5-3570K, 3800 MHz (38 x 100) Motherboard Name Asus Maximus V Extreme Flash Memory Type Samsung 21nm TLC NAND Video Adapter Asus HD7770

    Read the article

  • How to verify power provided to processors is clean

    - by GregC
    Once in a blue moon, I am seeing a blue screen of death on a shiny new Dell R7610 with a single 1100 Watt Dell-provided power supply on a beefy UPS. BCode is 101 (A clock interrupt was not received...), which some say is caused by under-volting a CPU. Naturally, I would have to contact Dell support, and their natural reaction would be to replace a motherboard, a power supply, or CPU, or a mixture of the above components. In synthetic benchmarks, system memory and CPU, as well as graphics memory and CPU perform admirably, staying up for hours and days. My questions are: Is power supply good enough for the application? Does it provide clean enough power to VRMs on the motherboard? Are VRMs good enough for dual Xeon E5-2665? Does C-states logic work correctly? Is there sufficient current provided to PCIe peripherals, such as disk controllers? P.S. Recently, I've gone through the ordeal with HP. They were nice and professional about it, but root cause was not established, and the HP machine still is less than 100%, giving me a blue screen of death once in a couple of months. Here's what quick web-searching turns up: http://www.sevenforums.com/bsod-help-support/35427-win-7-clock-interrupt-bsod-101-error.html#post356791 It appears Dell has addressed the above issue by clocking PCIe bus down to 5GT/sec in A03 BIOS. My disk controllers support PCIe 3.0, meaning that I would have to re-validate stability. Early testing shows improvements. Further testing shows significant decrease in performance on each of the x16 slots with Dell R7610 with A03 BIOS. But now it's running stable. HP machine has received a microcode update in September 2013 SUM (July BIOS) that makes it stable.

    Read the article

  • Pc sometimes turns on sometimes not

    - by cprogcr
    Some time ago, the PC gave the same problem. It wouldn't turn on. When i pressed the button, it turned on but showed nothing. I had replaced the CPU and that seemed to work. I didn't use the PC that much, rarely you know. But now, after some time, it gives the same problem. It turns on, the front light is on, it makes the normal noise the pc makes when it's turned on , but if I try to shut it down by holding the power button it just doesn't work. So again, I tried replacing the CPU and it worked again. I kept it all day working, just to be sure, and sometimes I would restart it and it would work again. No problems at all. So I turned it off at night, and next morning it just would make the same problem. So I tried replacing the PSU. And it worked again. Now while I had the PC with the new PSU, i tried to insert the old CPU, and again, it would turn on. The same thing, tried restarting too, and it would work. But this morning the same problem happened. Edit: I also tried another CPU today and yet no signs of working. I don't know now what to think.

    Read the article

  • Windows - CPU power management APIs

    - by iulianchira
    What APIs are provided by Windows for CPU power management (I'm interested in CPU frequency scaling, setting min and max CPU frequency - similar to what you can do in Control Panel in power plans, but in a programmatic way). I'm also interested in .Net APIs.

    Read the article

  • Eclipse uses 100 % CPU randomly

    - by Florian Gutmann
    Hi everyone! My eclipse sometimes starts using 100 % of my CPU very spontaneously. I can't figure out why it needs that much CPU usage. There is no background task like "building workspace" running. After some time the CPU load drops to 0 and everything is normal. I can't find any information related to the problem in workspace/.metadata/.log file. Has anybody some tip how i can figure out which part of eclipse is using the CPU so heavily? Is there a way to get a thread dump of eclipse? The kill -3 on the eclipse process doesn't do anything. Eclipse Version: Galileo JavaEE Operating System: Linux 2.6.31 Thanks in advance! Florian

    Read the article

  • CPU consumption of my process

    - by Abruzzo Forte e Gentile
    Hi all I would like to use Performance Monitor to check the CPU consumption of my process. Right now I am working on a MultiCore machine. If I have a look at my process in TASK MANAGER I see that my process consumes 20% of CPU. If I start performance monitor, I select Process--% Processor Time I see values peaking up and over 100%. Do you know why and how to get the real measure? I also looked at the CPU consumption for all of my 4 cores, but I don't know exactly how to attribute consumption to my process. If you can suggest a link or url about how to read CPU usage I would really appreciate! Thanks a lot! AFG

    Read the article

< Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >