Search Results

Search found 2953 results on 119 pages for 'mikew co'.

Page 35/119 | < Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >

  • Wireless internet is connected to an open network but has no internet

    - by Joshua Reeder
    I just installed Ubuntu on my laptop yesterday and it connected to the wireless fine. Then I took it to school, put it on their wired connection, downloaded some stuff, and now the wireless doesn't work. At first it would detect networks, but not connect. I restarted it and now it can connect, but it acts like it doesn't have internet in the browser. Wired connection still works fine on it. I know it isn't the network because my ipad is working on the wireless connection fine. I found another solution on here switching the security settings for the wireless, but this is the apartment's wireless so they have it open, and I won't be able to mess with it at all. Here is lspci output: 00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11) 00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11) 00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11) 00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11) 00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11) 00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11) 00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11) 00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 310M] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 07:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10) 16:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 20) 16:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 20) 16:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 20) 16:00.4 System peripheral: JMicron Technology Corp. xD Host Controller (rev 20) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04) ff:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04) ff:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04) ff:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04) ff:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04) ff:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04) ff:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04) ff:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04) ff:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04) ff:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04) ff:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04) ff:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04) Update: I re-installed Ubuntu 12.04 (I assumed I messed something up while toying with it) but it did not solve the problem. Eventually, I got it to work with my school's wireless internet (the default network settings were wrong), but the internet still doesn't work on my apartment's wifi (it has no security on it).

    Read the article

  • BlueTooth not working on my HP Probook 4720s

    - by mtrento
    the blue tooth on my ubuntu 11.10 does not work. When i try to ad a device it scans indefinitely and never find anything. Wireless is working perfeclty and with windows 7 it is detected. As i read somewhere , the bluetooth is not listed in the usb devices. Is it supported under ubuntu? here are the output of the various debug command i tested : hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: E0:2A:82:7A:8B:04 ACL MTU: 310:10 SCO MTU: 64:8 UP RUNNING PSCAN ISCAN RX bytes:1895 acl:0 sco:0 events:70 errors:0 TX bytes:1986 acl:0 sco:0 commands:64 errors:0 Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x59 0x83 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'PC543host-0' Class: 0x5a0100 Service Classes: Networking, Capturing, Object Transfer, Telephony Device Class: Computer, Uncategorized HCI Version: 2.1 (0x4) Revision: 0x149c LMP Version: 2.1 (0x4) Subversion: 0x149c Manufacturer: Cambridge Silicon Radio (10) hcitool scan hcitool scan Scanning ... lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 04f2:b1ac Chicony Electronics Co., Ltd Bus 002 Device 003: ID 413c:3010 Dell Computer Corp. Optical Wheel Mouse Bus 002 Device 004: ID 148f:1000 Ralink Technology, Corp. lsmod | grep -i bluetooth bluetooth 166112 23 bnep,rfcomm,btusb dmesg | grep -i bluetooth [ 18.543947] Bluetooth: Core ver 2.16 [ 18.544017] Bluetooth: HCI device and connection manager initialized [ 18.544020] Bluetooth: HCI socket layer initialized [ 18.544021] Bluetooth: L2CAP socket layer initialized [ 18.545469] Bluetooth: SCO socket layer initialized [ 18.548890] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 30.204776] Bluetooth: RFCOMM TTY layer initialized [ 30.204782] Bluetooth: RFCOMM socket layer initialized [ 30.204784] Bluetooth: RFCOMM ver 1.11 [ 30.247291] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 30.247295] Bluetooth: BNEP filters: protocol multicast lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5400 Series] 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] 44:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe 45:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no 2: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 3: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no

    Read the article

  • Bash completion doesn't work, or is ignoring what I've typed; but works for commands

    - by Neil Traft
    Bash completion seems to be ignoring what I've typed (it tries to complete, but acts as if there's nothing under the cursor). I know I saw it work on this machine earlier today, but I'm not sure what has changed. Some examples: cd shows all directories under my current folder: $ cd co<tab><tab> cmake/ config/ doc/ examples/ include/ programs/ sandbox/ src/ .svn/ tests/ Commands like ls and less show all files and directories under my current folder: $ ls co<tab><tab> cmake/ config/ .cproject Doxyfile.in include/ programs/ README.txt src/ tests/ CMakeLists.txt COPYING.txt doc/ examples/ mainpage.dox .project sandbox/ .svn/ Even when I try to complete things from a different folder, it gives me only the results for my current folder (telling me that it is completely ignoring what I've typed): $ cd ~/D<tab><tab> cmake/ config/ doc/ examples/ include/ programs/ sandbox/ src/ .svn/ tests/ But it seems to be working fine for commands and variables: $ if<tab><tab> if ifconfig ifdown ifnames ifquery ifup $ echo $P<tab><tab> $PATH $PIPESTATUS $PPID $PS1 $PS2 $PS4 $PWD $PYTHONPATH I do have this bit in my .bashrc, and I have confirmed that my .bashrc is indeed getting sourced: if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi I've even tried manually executing that file, but it doesn't fix the problem: $ . /etc/bash_completion There was even one point in time where it was working for ls, but was not working for cd ... but I can't replicate that result now. Update: I also just discovered that I have terminals open from earlier that still work. I ran source .bashrc in one of them and afterwards completion was broken. Here is my .bashrc: # ~/.bashrc: executed by bash(1) for non-login shells. # see /usr/share/doc/bash/examples/startup-files (in the package bash-doc) # for examples # # Modified by Neil Traft #source ~/.profile # Allow globs to expand hidden files shopt -s dotglob nullglob # If not running interactively, don't do anything [ -z "$PS1" ] && return # don't put duplicate lines or lines starting with space in the history. # See bash(1) for more options HISTCONTROL=ignoreboth # append to the history file, don't overwrite it shopt -s histappend # for setting history length see HISTSIZE and HISTFILESIZE in bash(1) HISTSIZE=1000 HISTFILESIZE=2000 # check the window size after each command and, if necessary, # update the values of LINES and COLUMNS. shopt -s checkwinsize # If set, the pattern "**" used in a pathname expansion context will # match all files and zero or more directories and subdirectories. #shopt -s globstar # make less more friendly for non-text input files, see lesspipe(1) [ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)" # set variable identifying the chroot you work in (used in the prompt below) if [ -z "$debian_chroot" ] && [ -r /etc/debian_chroot ]; then debian_chroot=$(cat /etc/debian_chroot) fi # Color the prompt export PS1="\[$(tput setaf 2)\]\u@\h:\[$(tput setaf 5)\]\W\[$(tput setaf 2)\] $\[$(tput sgr0)\] " # enable color support of ls and also add handy aliases if [ -x /usr/bin/dircolors ]; then test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)" alias ls='ls --color=auto' #alias dir='dir --color=auto' #alias vdir='vdir --color=auto' alias grep='grep --color=auto' alias fgrep='fgrep --color=auto' alias egrep='egrep --color=auto' fi # Add an "alert" alias for long running commands. Use like so: # sleep 10; alert alias alert='notify-send --urgency=low -i "$([ $? = 0 ] && echo terminal || echo error)" "$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&|]\s*alert$//'\'')"' # Alias definitions. # You may want to put all your additions into a separate file like # ~/.bash_aliases, instead of adding them here directly. # See /usr/share/doc/bash-doc/examples in the bash-doc package. if [ -f ~/.bash_aliases ]; then . ~/.bash_aliases fi # enable programmable completion features (you don't need to enable # this, if it's already enabled in /etc/bash.bashrc and /etc/profile # sources /etc/bash.bashrc). if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi

    Read the article

  • Thread safe double buffering

    - by kdavis8
    I am trying to implement a draw map method that will draw the tiled image across the surface of the component. I'm having issue with this code. The double buffering does not seem to be working, because the sprite flickers like crazy; my source code: package myPackage; import java.awt.Color; import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.Image; import java.awt.Toolkit; import java.awt.image.BufferStrategy; import java.awt.image.BufferedImage; import javax.swing.JFrame; public class GameView extends JFrame implements Runnable { public BufferedImage backbuffer; public Graphics2D g2d; public Image img; Thread gameloop; Scene scene; public GameView() { super("Game View"); setSize(600, 600); setVisible(true); setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); backbuffer = new BufferedImage(getWidth(), getHeight(), BufferedImage.TYPE_INT_RGB); g2d = backbuffer.createGraphics(); Toolkit tk = Toolkit.getDefaultToolkit(); img = tk.getImage(this.getClass().getResource("cage.png")); scene = new Scene(g2d, this); gameloop = new Thread(this); gameloop.start(); } public static void main(String args[]) { new GameView(); } public void paint(Graphics g) { g.drawImage(backbuffer, 0, 0, this); repaint(); } @Override public void run() { // TODO Auto-generated method stub Thread t = Thread.currentThread(); while (t == gameloop) { scene.getScene("dirtmap"); g2d.drawImage(img, 80, 80,this![enter image description here][1]); } } private void drawScene(String string) { // TODO Auto-generated method stub // g2d.setColor(Color.white); // g2d.fillRect(0, 0, getWidth(), getHeight()); scene.getScene(string); } } package myPackage; import java.awt.Color; import java.awt.Component; import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.Image; import java.awt.Toolkit; public class Scene { Graphics g2d; Component c; boolean loaded = false; public Scene(Graphics2D gr, Component co) { g2d = gr; c = co; } public void getScene(String mapName) { Toolkit tk = Toolkit.getDefaultToolkit(); Image tile = tk.getImage(this.getClass().getResource("dirt.png")); // g2d.setColor(Color.red); for (int y = 0; y <= 18; y++) { for (int x = 0; x <= 18; x += 1) { g2d.drawImage(tile, x * 32, y * 32, c); } } loaded = true; } }

    Read the article

  • Is a university education really worth it for a good programmer?

    - by Jon Purdy
    The title says it all, but here's the personal side of it: I've been doing design and programming for about as long as I can remember. If there's a programming problem, I can figure it out. (Though admittedly StackOverflow has allowed me to skip the figuring out and get straight to the doing in many instances.) I've made games, esoteric programming languages, and widgets and gizmos galore. I'm currently working on a general-purpose programming language. There's nothing I do better than programming. However, I'm just as passionate about design. Thus when I felt leaving high school that my design skills were lacking, I decided to attend university for New Media Design and Imaging, a digital design-related major. For a year, I diligently studied art and programmed in my free time. As the next year progressed, however, I was obligated to take fewer art and design classes and more technical classes. The trouble was of course that these classes were geared toward non-technical students, and were far beneath my skill level at the time. No amount of petitioning could overcome the institution's reluctance to allow me to test out of such classes, and the major offered no promise for any greater challenge in the future, so I took the extreme route: I switched into the technical equivalent of the major, New Media Interactive Development. A lot of my credits moved over into the new major, but many didn't. It would have been infeasible to switch to a more rigorous technical major such as Computer Science, and having tutored Computer Science students at every level here, I doubt I would be exposed to anything that I haven't already or won't eventually find out on my own, since I'm so involved in the field. I'm now on track to graduate perhaps a year later than I had planned, which puts a significant financial strain on my family and my future self. My schedule continues to be bogged down with classes that are wholly unnecessary for me to take. I'm being re-introduced to subjects that I've covered a thousand times over, simply because I've always been interested in it all. And though I succeed in avoiding the cynical and immature tactic of failing to complete work out of some undeserved sense of superiority, I'm becoming increasingly disillusioned by the lack of intellectual stimulation. Further, my school requires students to complete a number of quarters of co-op work experience proportional to their major. My original major required two quarters, but my current requires three, delaying my graduation even more. To top it all off, college is putting a severe strain on my relationship with my very close partner of a few years, so I've searched diligently for co-op jobs in my area, alas to no avail. I'm now in my third year, and approaching that point past which I can no longer handle this. Either I keep my head down, get a degree no matter what it takes, and try to get a job with a company that will pay me enough to do what I love that I can eventually pay off my loans; or I cut my losses now, move wherever there is work, and in six months start paying off what debt I've accumulated thus far. So the real question is: is a university education really more than just a formality? It's a big decision, and one I can't make lightly. I think this is the appropriate venue for this kind of question, and I hope it sticks around for the sake of others who might someday find themselves in similar situations. My heartfelt thanks for reading, and in advance for your help.

    Read the article

  • Slow wired internet connection on Realtek RTL8168-8111 (Rev 6)

    - by Mark
    I keep on seeing issues people are having with their wireless. I am having an issue with being wired into my router. I installed Ubuntu 11.10 the other day, on my custom PC. The motherboard I have installed on this PC is an ASUS P8H61-M. The issue I am having is with my speed. I have a dual boot, windows 7 and the new Ubuntu. On my Windows install I am getting test speeds from Speakeasy at 17Mbps and actual downloads around 2-3MB/s. With Ubuntu, I am getting test speeds from Speakeasy at 1.14Mbps and actual downloads around 60KB/s. I have disabled IPv6 and am no using GoogleDNS for my DNS, but it hasn't resolved the issue. I have scanned my router (WRT54GS Linksys) to disable IPv6 connections, and I am not seeing any option for that. I cannot figure out why I am getting such sluggish internet connection. Any help to resolve would be great! I performed an iconfig -a with these results: mark@Mark-ASUS:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr f4:6d:04:d1:2c:4e inet addr:192.168.1.103 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::f66d:4ff:fed1:2c4e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:21888 errors:0 dropped:21888 overruns:0 frame:21888 TX packets:21068 errors:0 dropped:90 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:26348337 (26.3 MB) TX bytes:2217140 (2.2 MB) Interrupt:46 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:7 errors:0 dropped:0 overruns:0 frame:0 TX packets:7 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:952 (952.0 B) TX bytes:952 (952.0 B) My specs are: mark@Mark-ASUS:~$ sudo lspci -nn 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) 06:00.0 PCI bridge [0604]: ASMedia Technology Inc. Device [1b21:1080] (rev 01) udev information: KERNEL[11.351405] add /devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 (net) UDEV_LOG=3 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 SUBSYSTEM=net INTERFACE=eth0 IFINDEX=2 SEQNUM=1542 UDEV [11.363905] add /devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 (net) UDEV_LOG=3 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 SUBSYSTEM=net INTERFACE=eth0 IFINDEX=2 SEQNUM=1542 ID_VENDOR_FROM_DATABASE=Realtek Semiconductor Co., Ltd. ID_MODEL_FROM_DATABASE=RTL8111/8168B PCI Express Gigabit Ethernet controller ID_BUS=pci ID_VENDOR_ID=0x10ec ID_MODEL_ID=0x8168 ID_MM_CANDIDATE=1 dmesg information: [ 2.855982] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.856366] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc9000064c000, f4:6d:04:d1:2c:4e, XID 0c900800 IRQ 46 [ 12.540956] r8169 0000:04:00.0: eth0: link down [ 12.540961] r8169 0000:04:00.0: eth0: link down [ 12.541173] ADDRCONF(NETDEV_UP): eth0: link is not ready I took out a lot of information that did not pertain to eth0, because the previous edits wouldn't save. If I need any more information, let me know. I would love to get this resolved. The other issue I am noticing is sometimes my connection disconnects all together, for about a minute, then it reconnects.

    Read the article

  • Nominations now open for the Oracle FMW Excellence Awards 2014

    - by Greg Jensen
    2014 Oracle Excellence Award NominationsWho Is the Innovative Leader for Identity Management? •    Is your organization leveraging one of Oracle’s Identity and Access Management solutions in your production environment?•    Are you a leading edge organization that has adopted a forward thinking approach to Identity and Access Management processes across the organization?•    Are you ready to promote and highlight the success of your deployment to your peers? •    Would you a chance to win FREE registration to Oracle OpenWorld 2014? Oracle is pleased to announce the call for nominations for the 2014 Oracle Excellence Awards: Oracle Fusion Middleware Innovation.  The Oracle Excellence Awards for Oracle Fusion Middleware Innovation honor organizations using Oracle Fusion Middleware to deliver unique business value.  This year, the awards will recognize customers across nine distinct categories, including Identity and Access Management.  Oracle customers, who feel they are pioneers in their implementation of at least one of the Oracle Identity and Access Management offerings in a production environment or active deployment, should submit a nomination.  If submitted by June 20th, 2014, you will have a chance to win a FREE registration to Oracle OpenWorld 2014 (September 28 - October 2) in San Francisco, CA.  Top customers will be showcased at Oracle OpenWorld and featured in Oracle publications.   The  Identity and Access Management Nomination Form Additional benefits to nomineesNominating your organization opens additional opportunities to partner with Oracle such as:•    Promotion of your Customer Success StoriesProvides a platform for you to share the success of your initiatives and programs to peer groups raising the overall visibility of your team and your organization as a leader in security•    Social Media promotion (Video, Blog & Podcast)Reach the masses of Oracle’s customers through sharing of success stories, or customer created blog content that highlights the advanced thought leadership role in security with co-authored articles on Oracle Blog page that reaches close to 100,000 subscribers. There are numerous options to promote activities on Facebook, Twitter and co-branded activities using Video and Audio. •    Live speaking opportunities to your peersAs a technology leader within your organization, you can represent your organization at Oracle sponsored events (online, in person or webcasts) to help share the success of your organizations efforts building out your team/organization brand and success. •    Invitation to the IDM Architect ForumOracle is able to invite the right customers into the IDM Architect Forum which is an invite only group of customers that meet monthly to hear technology driven presentations from their own peers (not from Oracle) on today’s trends.  If you want to hear privately what some of the most successful companies in every industry are doing about security, this is the forum to be in. All presentations are private and remain within the forum, and only members can see take advantage of the lessons gained from these meetings.  To date, there are 125 members. There are many more advantages to partnering with Oracle, however, it can start with the simple nomination form for Identity and Access Management category of the 2014 Oracle Excellence Award Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;}

    Read the article

  • Errors when trying to compile the driver for the rtl8192su wireless adapter

    - by Tom Brito
    I have a wireless to usb adapter, and I'm having some trouble to install the drivers on Ubuntu. First of all, the readme says to use the make command, and I already got errors: $ make make[1]: Entering directory `/usr/src/linux-headers-2.6.35-22-generic' CC [M] /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c: In function ‘rtl8192_usb_probe’: /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12325: error: ‘struct net_device’ has no member named ‘open’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12326: error: ‘struct net_device’ has no member named ‘stop’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12327: error: ‘struct net_device’ has no member named ‘tx_timeout’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12328: error: ‘struct net_device’ has no member named ‘do_ioctl’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12329: error: ‘struct net_device’ has no member named ‘set_multicast_list’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12330: error: ‘struct net_device’ has no member named ‘set_mac_address’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12331: error: ‘struct net_device’ has no member named ‘get_stats’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12332: error: ‘struct net_device’ has no member named ‘hard_start_xmit’ make[2]: *** [/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o] Error 1 make[1]: *** [_module_/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-22-generic' make: *** [all] Error 2 /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/ is the path where I copied the drivers on my computer. Any idea how to solve this? (I don't even know what the error is...) update: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 03 serial: 78:e3:b5:e7:5f:6e size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:42 ioport:d800(size=256) memory:fbeff000-fbefffff memory:faffc000-faffffff memory:fbec0000-fbedffff *-network DISABLED description: Wireless interface physical id: 2 logical name: wlan0 serial: 00:26:18:a1:ae:64 capabilities: ethernet physical wireless configuration: broadcast=yes multicast=yes wireless=802.11b/g sudo lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller (rev 01) sudo lsusb Bus 002 Device 003: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 045e:00f9 Microsoft Corp. Wireless Desktop Receiver 3.1 Bus 001 Device 003: ID 0b05:1786 ASUSTek Computer, Inc. Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

    Read the article

  • Dell 3721 Wifi problem Ubuntu 13.04

    - by Sebastian
    I have a Dell 3721 which comes original with windows 8. I managed it to install ubuntu 12.10 on this laptop, even there was no out of the box drivers. With 12.10 I was forces to install this .deb package couple of times. After installing it, it was ok for some weeks before I have to install it again. Maybe some security updates destroy something which made in necessary to install it again... http://jas.gemnetworks.com/debian/pool/main/w/wireless-bcm43142/wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb My problem is, that this package isnt working with ubuntu 13.04 anymore. So I cant use Wifi now. Also my display is almost dark, I cant change the brightness level with ubuntu 13.04. Hope you can give me some advice. Dell:~$ sudo lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) 02:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01) @Dell:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0a5c:21d7 Broadcom Corp. Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. Bus 001 Device 005: ID 0c45:64ad Microdia @Dell:~$ lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) @Dell:~$ sudo lshw -class network *-network Beschreibung: Ethernet interface Produkt: RTL8101E/RTL8102E PCI Express Fast Ethernet controller Hersteller: Realtek Semiconductor Co., Ltd. Physische ID: 0 Bus-Informationen: pci@0000:01:00.0 Logischer Name: eth0 Version: 05 Seriennummer: xx:xx:xx:xx:xx:xx Größe: 100Mbit/s Kapazität: 100Mbit/s Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation Konfiguration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw ip=192.168.2.103 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s Ressourcen: irq:42 ioport:2000(Größe=256) memory:c0404000-c0404fff memory:c0400000-c0403fff *-network UNGEFORDERT Beschreibung: Network controller Produkt: BCM43142 802.11b/g/n Hersteller: Broadcom Corporation Physische ID: 0 Bus-Informationen: pci@0000:02:00.0 Version: 01 Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress bus_master cap_list Konfiguration: latency=0 Ressourcen: memory:c0500000-c0507fff

    Read the article

  • WiFi stops working after a while in Lenovo ThinkPad W520 (Ubuntu 12.04)

    - by el10780
    After several minutes(I do not know how many) there is no internet connection on my laptop via Wi-Fi.Ubuntu doesn't show any kind of message that my WiFi was disconnected neither there is a signal drop,but suddenly Firefox stops connecting to web pages.I checked my modem/router and it seems that it is working fine.I tried also to reboot the WiFi device and nothing happens.The only thing that it makes it work again is a reboot of the system and if I do not want to do a reboot then I am enforced to connect to the Internet using Ethernet cable.Does anybody know what is happening? ## Some Hardware info that might be helpful ## el10780@ThinkPad-W520:~$ sudo lshw -class network *-network description: Ethernet interface product: 82579LM Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 04 serial: f0:de:f1:f1:be:10 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.5.1-k duplex=full firmware=0.13-3 ip=192.168.0.10 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:50 memory:f3a00000-f3a1ffff memory:f3a2b000-f3a2bfff ioport:6080(size=32) *-network description: Wireless interface product: Centrino Advanced-N + WiMAX 6250 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 5e serial: 64:80:99:63:14:74 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-26-generic firmware=41.28.5.1 build 33926 ip=192.168.0.6 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:52 memory:f3900000-f3901fff *-network description: Ethernet interface physical id: 1 bus info: usb@2:1.3 logical name: wmx0 serial: 00:1d:e1:53:b2:e8 capabilities: ethernet physical configuration: driver=i2400m firmware=i6050-fw-usb-1.5.sbcf link=no el10780@ThinkPad-W520:~$ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4) 00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) 03:00.0 Network controller: Intel Corporation Centrino Advanced-N + WiMAX 6250 (rev 5e) 0d:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 08) 0d:00.3 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 PCIe IEEE 1394 Controller (rev 04) 0e:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) el10780@ThinkPad-W520:~$ rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 3: i2400m-usb:2-1.3:1.0: WiMAX Soft blocked: yes Hard blocked: no The weirdest thing is this screenshot which I took after running the **Additional Drivers** program.I mean I have a NVidia Quadro 1000M and my Intel Centrino WiFi Card and this shows that there are not proprietay drivers for my system. http://imageshack.us/photo/my-images/268/screenshotfrom201207062.png/

    Read the article

  • 101 Ways to Participate...and make the future Java

    - by heathervc
     In case you missed it earlier today, and as promised in BOF6283, here are the 101 Ways to Improve (and Make the Future) Java...thanks to Bruno Souza of SouJava and Martijn Verburg of the London Java Community for their contributions! Join or create a JUG Come to the meetings Help promoting your JUG: twitter, facebook, etc Find someone that can give a talk Get your company to sponsor (a meeting, an event) Organize an activity (meetings, hackathons, dojos, etc) Answer questions on a mailing list (or simply join!) Volunteer for a small, one time tasks (creating a web page, helping with an activity) Come early to an event, and help to carry the piano Moderate a list or add things to the wiki Participate in the organization meetings or mailing lists Take pictures of an event or meeting and publish them online Write a blog about an event or meeting, to help promote the group Help record and post a session online Present your JavaOne experience when you get back Repeat the best talk you saw at JavaOne at a JUG meeting Send this list of ideas to other Java developers in your area so they can help out too! Present a step-by-step tutorial Present GreenFoot and Alice to school students Present BlueJ and Alice to university students Teach those tools to teachers and professors Write a step-by-step tutorial on your blog or to a magazine Create a page that lists resources Give a talk about your favorite Java feature or technology Learn a new Java API and present to your co-workers Then, present in a JUG meeting, and then, present it in an event in your area, and submit it to JavaOne! Create a study group to get certified or to learn some new Java technology Teach a non-Java developer how to download the basic tools and where to find more information Download and use an open source project Improve the documentation Write an article or a blog post about the project Write an FAQ Join and participate on the mailing list Describe a bug in detail and submit a bug report Fix a bug and submit it to the project Give a talk about it at a JUG meeting Teach your co-workers how to use the project Sign up to Adopt a JSR Test regular builds of the Reference Implementation (RI) Report bugs in the RI Submit Feature Requests to the spec Triage issues on the issue tracker Run a hack day to discuss the API Moderate mailing lists and forums Create an FAQ or Wiki Evangelize a specification on Twitter, G+, Hacker News, etc Give a lightning talk Help build the RI Help build the Technical Compatibility Kit (TCK) Create a Podcast Learn Latin - e.g. legal language, translate to English Sign up to Adopt OpenJDK Run a Bugathon Fix javac compiler warnings Build virtual images Add tests to Java Submit Javadoc patches Give a webbing Teach someone to build OpenJDK Hold a brown bag session at work Fix the oldest known bug Overhaul Javadoc to use HTML Load the OpenJDK into different IDEs Run a build farm node Test your code on a nightly build Learn how to read Java byte code Visit JCP.org Follow jcp_org on Twitter Friend JCP on Facebook Read JCP Blog Register for JCP.org site Create a JSR Watch List Review JSRs in progress Comment on JSRs in progress, write and track bug reports, use cases, etc Review JSRs in Maintenance Comment on JSRs in Maintenance Implement Final JSRs Review the Transparency of JSRs in progress and provide feedback to the PMO and Spec Lead/community Become a JCP Member or associate with a current JCP member Nominate to serve on an Expert Group (EG) Serve on an EG Submit a JSR proposal and become Spec Lead Take a Spec Lead role in an Inactive or Dormant JSR Nominate for an Executive Committee (EC) seat Vote in the EC elections Vote in EC Special Elections Review EC Meeting Summaries Attend Spec Lead calls Write blogs, articles on your experiences Join the EC project on java.net Join JCP.Next on java.net/JSR 358 Participate on the JCP forums and join JSR projects on java.net Suggest agenda items for open EC meetings Attend public EC teleconference (2x per year) Attend open EC meetings at JavaOne Nominate for JCP Annual Awards Attend annual JavaOne and JCP Annual Awards Ceremony Attend JCP related BOF sessions and give your feedback to Program Office Invite JCP program office members to your JUG  or meetup Invite JSR Spec Leads to your JUG or meetup And always - hold a party!

    Read the article

  • Looking for a real-world example illustrating that composition can be superior to inheritance

    - by Job
    I watched a bunch of lectures on Clojure and functional programming by Rich Hickey as well as some of the SICP lectures, and I am sold on many concepts of functional programming. I incorporated some of them into my C# code at a previous job, and luckily it was easy to write C# code in a more functional style. At my new job we use Python and multiple inheritance is all the rage. My co-workers are very smart but they have to produce code fast given the nature of the company. I am learning both the tools and the codebase, but the architecture itself slows me down as well. I have not written the existing class hierarchy (neither would I be able to remember everything about it), and so, when I started adding a fairly small feature, I realized that I had to read a lot of code in the process. At the surface the code is neatly organized and split into small functions/methods and not copy-paste-repetitive, but the flip side of being not repetitive is that there is some magic functionality hidden somewhere in the hierarchy chain that magically glues things together and does work on my behalf, but it is very hard to find and follow. I had to fire up a profiler and run it through several examples and plot the execution graph as well as step through a debugger a few times, search the code for some substring and just read pages at the time. I am pretty sure that once I am done, my resulting code will be short and neatly organized, and yet not very readable. What I write feels declarative, as if I was writing an XML file that drives some other magic engine, except that there is no clear documentation on what the XML should look like and what the engine does except for the existing examples that I can read as well as the source code for the 'engine'. There has got to be a better way. IMO using composition over inheritance can help quite a bit. That way the computation will be linear rather than jumping all over the hierarchy tree. Whenever the functionality does not quite fit into an inheritance model, it will need to be mangled to fit in, or the entire inheritance hierarchy will need to be refactored/rebalanced, sort of like an unbalanced binary tree needs reshuffling from time to time in order to improve the average seek time. As I mentioned before, my co-workers are very smart; they just have been doing things a certain way and probably have an ability to hold a lot of unrelated crap in their head at once. I want to convince them to give composition and functional as opposed to OOP approach a try. To do that, I need to find some very good material. I do not think that a SCIP lecture or one by Rich Hickey will do - I am afraid it will be flagged down as too academic. Then, simple examples of Dog and Frog and AddressBook classes do not really connivence one way or the other - they show how inheritance can be converted to composition but not why it is truly and objectively better. What I am looking for is some real-world example of code that has been written with a lot of inheritance, then hit a wall and re-written in a different style that uses composition. Perhaps there is a blog or a chapter. I am looking for something that can summarize and illustrate the sort of pain that I am going through. I already have been throwing the phrase "composition over inheritance" around, but it was not received as enthusiastically as I had hoped. I do not want to be perceived as a new guy who likes to complain and bash existing code while looking for a perfect approach while not contributing fast enough. At the same time, my gut is convinced that inheritance is often the instrument of evil and I want to show a better way in a near future. Have you stumbled upon any great resources that can help me?

    Read the article

  • trying to setup wireless

    - by JohnMerlino
    I'm trying to set up wireless on vostro 1520 dell laptop, with latest Ubuntu install. Here's the output of some of the commands that I was told to run: lshw -C network viggy@ubuntu:~$ lshw -C network WARNING: you should run this program as super-user. *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:08:00.0 logical name: eth0 version: 03 serial: 00:24:e8:da:84:25 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168d-1.fw ip=192.168.2.6 latency=0 multicast=yes port=MII speed=100Mbit/s resources: irq:47 ioport:3000(size=256) memory:f6004000-f6004fff memory:f6000000-f6003fff memory:f6020000-f603ffff *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0e:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:fa000000-fa003fff *-network DISABLED description: Wireless interface physical id: 1 logical name: wlan0 serial: 0c:60:76:05:ee:74 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.2.0-29-generic firmware=N/A multicast=yes wireless=IEEE 802.11bg lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 0e:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 1a:00.0 FireWire (IEEE 1394): O2 Micro, Inc. Device 10f7 (rev 01) 1a:00.1 SD Host controller: O2 Micro, Inc. Device 8120 (rev 01) 1a:00.2 Mass storage controller: O2 Micro, Inc. Device 8130 (rev 01) iwconfig lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on eth0 no wireless extensions. At this point in time, I don't have wireless.

    Read the article

  • Understanding the Value of SOA

    - by Mala Narasimharajan
    Written By: Debra Lilley, ACE Director, Fusion Applications Again I want to talk from my area of expertise of Fusion Applications and talk about their design fundamentals. If you look at the table below and start at the bottom Oracle have defined all of the business objects e.g. accounts, people, customers, invoices etc. used by Fusion Applications; each of these objects contain all of the information required and can be expanded if necessary.  That Oracle have created for each of these business objects every action that is needed for the applications e.g. all the actions to create a new customer, checking to see if it exists, credit checking with D&B (Dun & Bradstreet < http://www.dnb.co.uk/> ) , creating the record, notifying those required etc. Each of these actions is a stand-alone web service. Again you can create a new actions or subscribe to an external provided web service e.g. the D&B check. The diagram also shows that all of development of Fusion Applications is from their Fusion Middleware offerings. Then the Intelligent Business Process is the order in which you run these actions, this is Service Orientated Architecture, SOA. Not only is SOA used to orchestrate actions within Fusion Applications it is also used in the integration of Fusion Applications with the rest of the Oracle stable of applications such as EBS, PeopleSoft, JDE and Siebel. The other applications are written with propriety development tools so how do they work with SOA? It’s a very simple answer, with the introduction of the Oracle SOA platform each process within these applications was made available to be called as a web service. I won’t go into technically how that is done but what’s known as a wrapper to allow each of them to act in this way was added. Finally at the top of the diagram are the questions that each Fusion Application process must answer, and this is the ‘special’ sauce that makes them so good, the User Experience, but that is a topic for another day, or you can read about it in my blog http://debrasoracle.blogspot.co.uk/2014/04/going-on-record-about-fusion-apps-cloud.html or Oracle’s own UX blog https://blogs.oracle.com/usableapps/ The concept behind AppAdvantage is not new the idea that Oracle technology can add value to your Oracle applications investments is pretty fundamental. Nishit Rao who is in AppAdvantage team provided myself and other ACE Directors with demo kits so that we could demonstrate SOA running with the applications. The example I learnt to build was that of the EBS inventory open interface. The simple concept is that request records can be added to a table and an import run that creates these as transactions in inventory. What’s SOA allows you to do is to add to the table from any source and then run this process automatically whereas traditionally you had to run the process at regular intervals because you didn’t know if the table was empty or not. This may just sound like a different way of doing the same thing but if the process is critical for your business then the interval was very small and the process run potentially many times unnecessarily. Using SOA it only happened when necessary without any delay. So in my post today I’ve talked about how SOA is used with Fusion Applications and in the linking with more traditional applications but that is only the tip of the iceberg of potential, your applications are just part of your IT systems and SOA can orchestrate your data across all of them; the beauty of open standards.  Debra Lilley, Fusion Champion, UKOUG Board Member, Fusion User Experience Advocate and ACE Director.  Lilley has 18 years experience with Oracle Applications, with E Business Suite since 9.4.1, moving to Business Intelligence Team Lead and Oracle Alliance Director. She has spoken at over 100 conferences worldwide and posts at debrasoraclethoughts

    Read the article

  • URL detection with JavaScript

    - by josh
    Hi! I'm using the following script to force a specific page - when loaded for the first time - into a (third-party) iFrame. <script type="text/javascript"> if(window.top==window) { location.reload() } else { } </script> (For clarification: This 'embedding' is done automatically by the third-party system but only if the page is refreshed once - for styling and some other reasons I want it there from the beginning.) Right now, I'm wondering if this script could be enhanced in ways that it's able to detect the current URL of its 'parent' document to trigger a specific action? Let's say the URL of the third-party site is 'http://cgi.site.com/hp/...' and the URL of the iFrame 'http://co.siteeps.com/hp/...'. Is it possible to realize sth. like this with JS: <script type="text/javascript"> if(URL is 'http://cgi.site.com/hp/...') { location.reload() } if(URL is 'http://co.siteeps.com/hp/...') { location.do-not.reload() resp. location.do-nothing() } </script> TIA josh

    Read the article

  • Enterprise SSO & Identity management / recommendations

    - by Maxim Veksler
    Hello Friends, We've discussed SSO before. I would like to re-enhance the conversation with defined requirements, taking into consideration recent new developments. In the past week I've been doing market research looking for answers to the following key issues: The project should should be: Requirements SSO solution for web applications. Integrates into existing developed products. has Policy based password security (Length, Complexity, Duration and co) Security Policy can be managed using a web interface. Customizable user interface (the password prompt and co. screens). Highly available (99.9%) Scalable. Runs on Red Hat Linux. Nice to have Contains user Groups & Roles. Written in Java. Free Software (open source) solution. None of the solutions came up so far are "killer choice" which leads me to think I will be tooling several projects (OWASP, AcegiSecurity + X??) hence this discussion. We are ISV delivering front-end & backend application suite. The frontend is broken into several modules which should act as autonomous unit, from client point of view he uses the "application" - which leads to this discussion regrading SSO. I would appreciate people sharing their experience & ideas regarding the appropriete solutions. Some solutions are interesting CAS Sun OpenSSO Enterprise JBoss Identity IDM JOSSO Tivoli Access Manager for Enterprise Single Sign-On Or more generally speaking this list Thank you, Maxim.

    Read the article

  • Problems reading RSS feed with jQuery.get()

    - by bbeckford
    Hi there, I've been pulling my hair out trying to use jQuery.get() to pull in my dynamically generated RSS feed and I'm having nothing but issues, is my RSS feed the wrong format? If so can I convert it to the correct format using javascript? Here's my feed: http://dev.chriscurddesign.co.uk/burns/p/rc_rss.php?rcf_id=0 Here's my code: function get_rss_feed() { $(".content").empty(); $.get("http://dev.chriscurddesign.co.uk/burns/p/rc_rss.php?rcf_id=0", function(d) { var i = 0; $(d).find('item').each(function() { var $item = $(this); var title = $item.find('title').text(); var link = $item.find('link').text(); var location = $item.find('location').text(); var pubDate = $item.find('pubDate').text(); var html = '<div class="entry"><a href="' + link + '" target="_blank">' + title + '</a></div>'; $('.content').append(html); i++; }); }); }; Any input would be greatly appreciated!! Thanks

    Read the article

  • XmlNode.SelectNode with multiple attribute.

    - by kapil
    One of my nodes inmy xml file is as follows. <LOGIN_ID NAME="Kapil"> <SEARCH_ID>Kapil Koli</SEARCH_ID> <GUID>111</GUID> <FIRST_NAME>Kapil</FIRST_NAME> <LAST_NAME>Koli</LAST_NAME> <EMAIL_ID>kapil@abc.co.in</EMAIL_ID> <PASSWORD>abc123**</PASSWORD> </LOGIN_ID> The code I am using is - XmlDocument document = new XmlDocument(); document.Load(_XmlFileName); nodeList = document.SelectNode."USERS/LOGIN_ID[contains(SEARCH_ID,'Kapil')"; nodeList = document.SelectNode."USERS/LOGIN_ID[contains(EMAIL_ID,'kapil@abc.co.in')"; I want to use select node which will accept search_id and login_id as attributes to search? If either search_id or email_id is wrong, I want to return null. How could I do this? thanks. kapil.

    Read the article

  • Why can't I use WCF DataContract and ISerializable on the same class?

    - by Dave
    Hi all, I have a class that I need to be able to serialize to a SQLServer session variable and be available over a WCF Service. I have declared it as follows namespace MyNM { [Serializable] [DataContract(Name = "Foo", Namespace = "http://www.mydomain.co.uk")] public class Foo : IEntity, ISafeCopy<Foo> { [DataMember(Order = 0)] public virtual Guid Id { get; set; } [DataMember(Order = 1)] public virtual string a { get; set; } DataMember(Order = 2)] public virtual Bar c { get; set; } /* ISafeCopy implementation */ } [Serializable] [DataContract(Name = "Bar ", Namespace = "http://www.mydomain.co.uk")] public class Bar : IEntity, ISafeCopy<Bar> { #region Implementation of IEntity DataMember(Order = 0)] public virtual Guid Id { get; set; } [DataMember(Order = 1)] public virtual Baz y { get; set; } #endregion /* ISafeCopy implementation*/ } [Serializable] [DataContract] public enum Baz { [EnumMember(Value = "one")] one, [EnumMember(Value = "two")] two, [EnumMember(Value = "three")] three } But when I try and call this service, I get the following error in the trace log. "System.Runtime.Serialization.InvalidDataContractException: Type 'BarProxybcb100e8617f40ceaa832fe4bb94533c' cannot be ISerializable and have DataContractAttribute attribute." If I take out the Serializable attribute, the WCF service works, but when the object can't be serialized to session. If I remove the DataContract attribute from class Bar, the WCF service fails saying Type 'BarProxy3bb05a31167f4ba492909ec941a54533' with data contract name 'BarProxy3bb05a31167f4ba492909ec941a54533:http://schemas.datacontract.org/2004/07/' is not expected. Add any types not known statically to the list of known types - for example, by using the KnownTypeAttribute attribute or by adding them to the list of known types passed to DataContractSerializer I've tried adding a KnownType attribute to the foo class [KnownType(typeof(Bar))] But I still get the same error. Can anyone help me out with this? Many thanks Dave

    Read the article

  • How to copy the shipping address to billing address

    - by Jerry
    Hi all I like to know if I can copy the shipping address to billing address. I got most of the parts done but I am not sure how to copy select menu (states) value to billing address. I really appreciate any helps. My code $(document).ready(function(){ Jquery $('#same').click(function(){ if($('#same').attr('checked')){ $('#bfName').val($('#fName').val()); $('#blName').val($('#lName').val()); $('#baddress1').val($('#address1').val()); $('#baddress2').val($('#address2').val()); $('#bcity').val($('#city').val()); alert(($('#state option:selected').val())); //not sure what to do here $('#bzip').val($('#zip').val()); }; }); Html <td><select name="state"> //shipping states......only partial codes. <option value="">None <option value="AL">Alabama <option value="AK">Alaska <option value="AZ">Arizona <option value="AR">Arkansas <option value="CA">California <option value="CO">Colorado <option value="CT">Connecticut </select></td> <td><select name="bstate"> //billing state................only partial codes. <option value="">None <option value="AL">Alabama <option value="AK">Alaska <option value="AZ">Arizona <option value="AR">Arkansas <option value="CA">California <option value="CO">Colorado <option value="CT">Connecticut </select></td> Thanks a lot!

    Read the article

  • Handling Erlang inets http client errors

    - by Justin
    I have an Erlang app which makes a large number of http calls to external sites using inets, using the code below case http:request(get, {Url, []}, [{autoredirect, false}], []) of {ok, {{_, Code, _}, _, Body}}-> case Code of 200 -> HandlerFn(Body); _ -> {error, io:format("~s returned HTTP ~p", [Broker, Code])} end; Response -> %% block to handle unexpected responses from inets {error, io:format("~s returned ~p", [Broker, Response])} end. There is an explicit block to handle anything strange inets might return [Response]. Despite this, I still get what look like inets error reports dumped to the console [sample below]. What am I doing wrong here ? Do I need to configure some kind of inets error handler elsewhere ? Thanks. -- =ERROR REPORT==== 24-Apr-2010::06:49:47 === ** Generic server <0.6618.0 terminating ** Last message in was {connect_and_send, {request,#Ref<0.0.0.139358,<0.6613.0,0,http, {"***",80}, "****************", [],get, {http_request_h,undefined,"keep-alive", undefined,undefined,undefined,undefined, undefined,undefined,undefined,undefined, undefined,undefined,undefined,undefined, undefined,undefined,"news.bbc.co.uk", undefined,undefined,undefined,undefined, undefined,undefined,undefined,undefined, undefined,[],undefined,undefined,undefined, undefined,"0",undefined,undefined, undefined,undefined,undefined,undefined,[]}, {[],[]}, {http_options,"HTTP/1.1",infinity,false,[], undefined,false,infinity}, "*******************", [],none,[],1272088179114,undefined,undefined}} * When Server state == {state, {request,#Ref<0.0.0.139358,<0.6613.0,0,http, {"********",80}, "***************", [],get, {http_request_h,undefined,"keep-alive", undefined,undefined,undefined,undefined, undefined,undefined,undefined,undefined, undefined,undefined,undefined,undefined, undefined,undefined,"news.bbc.co.uk", undefined,undefined,undefined,undefined, undefined,undefined,undefined,undefined, undefined,[],undefined,undefined, undefined,undefined,"0",undefined, undefined,undefined,undefined,undefined, undefined,[]}, {[],[]}, {http_options,"HTTP/1.1",infinity,false,[], undefined,false,infinity}, "**********************", [],none,[],1272088179114,undefined,undefined}, undefined,undefined,undefined,undefined,undefined, {[],[]}, {[],[]}, undefined,[],nolimit,nolimit, {options, {undefined,[]}, 0,2,5,120000,2,disabled,false,inet,default, default,[]}, {timers,[],undefined}, httpc_manager,undefined} ** Reason for termination == ** {error,{connect_failed,{#Ref<0.0.0.139358,{error,nxdomain}}}} =ERROR REPORT==== 24-Apr-2010::06:49:47 === HTTPC-MANAGER handler (<0.6618.0, started) failed to connect and/or send request #Ref<0.0.0.139358 Result: {error,{connect_failed,{#Ref<0.0.0.139358,{error,nxdomain}}}}

    Read the article

  • Using regex to extract variables from a plain-text form letter?

    - by Yaaqov
    Hi - I'm looking for a good example of using Regular Expressions in PHP to "reverse engineer" a form letter (with a known format, of course) that has been pasted into a multiline textbox and sent to a script for processing. So, for example, let's assume this is the original plain-text input (taken from a USDA press release): WASHINGTON, April 5, 2010 - North American Bison Co-Op, a New Rockford, N.D., establishment is recalling approximately 25,000 pounds of whole beef heads containing tongues that may not have had the tonsils completely removed, which is not compliant with regulations that require the removal of tonsils from cattle of all ages, the U.S. Department of Agriculture's Food Safety and Inspection Service (FSIS) announced today. For clarity, the fields that are variables are highlighted below: [pr_city=]WASHINGTON, [pr_date=]April 5, 2010 - [corp_name=]North American Bison Co-Op, a [corp_city=]New Rockford, [corp_state=]N.D., establishment is recalling approximately [amount=]25,000 pounds of [product=]whole beef heads containing tongues that may not have had the tonsils completely removed, which is not compliant with regulations that require [reason=]the removal of tonsils from cattle of all ages, the U.S. Department of Agriculture's Food Safety and Inspection Service (FSIS) announced today. How could I efficiently extract the contents of the pr_city pr_date corp_name corp_city corp_state amount product reason fields from my example? Any help would be appreciated, thanks.

    Read the article

  • COM Interop - Wait for Excel to Complete Operation

    - by roygbiv
    Hello, I am doing some COM Interop work with Excel and other Office Automation Software. A Co-Worker has mentioned to me that I need to wait for these Automation Servers to become ready after issuing a command to them. I, however, cannot see the purpose of this as don't all calls block until the automation server completes the given task? For example I would normally write: Dim o as AutomationObject = AutomationServer.CreateObject(x, y, z) o.Property ' could throw COM exception!!???? My co-worker says I need to sleep after that call because the the Automation Server could still be working on creating and initializing the object. Dim o as AutomationObject = AutomationServer.CreateObject(x, y, z) Threading.Sleep(5000) ' wait for AutomationServer to "become ready" o.Property ' could still throw COM exception!!???? The problem I have with this is that the AutomationServer calls should block until the AutomationServer finishes or completes what it was working on or at the very least it should be a loop checking if "o" is nothing, but that makes no sense because once the call returns its done! My question is, Is there any benefit to Sleeping after an AutomationServer call? Is there a method to "wait" until the AutomationServer finishes (if it does not in fact block)?

    Read the article

  • using jquery (json) to get ajax database entries in wordpress - PHP not working

    - by Matt Facer
    I'm writing a plugin for my wordpress site and am having trouble understanding the jquery ajax requests. In a nutshell, I am trying to get some user meta data loaded when the page loads. So in my javascript file I have a line: $.getJSON("http://mysite.co.uk/wp-content/plugins/myplugin/ajax/ajax.php?action=test", function(json) { // do stuff }); So the above DOES get called, but it's the PHP code I'm having trouble with. In the file ajax.php, I am making a database call, but NONE of the usual class information is available. I've tried including the admin ajax page, various other pages from my own plugin (which does work).... not sure what else to do! The database call method works OK in my plugin code.. but I guess that the ajax.php file is outside the WP framework so that's why it's not working... but I don't know how to get it IN the framework!? I just need to use the $wpdb->get_results($sql); command to get my SQL. The error returned from firebug is that I am making a call to an undefined function. Thanks for any help... $.getJSON("http://www.offbeatattractions.co.uk/wp-content/plugins/wp-geo-extended/ajax/change_location.php?action=listpoints", function(json) { alert(json.Locations.length);

    Read the article

  • Simple HTML problem with href

    - by pallab
    I am trying to create images hyperlinked to some URL's and hyperlinks donot seem to work. I am using the code as given below at http://windchimes.co.in/index_w%20-%20Copy.html Can you tell me why the hyperlinks to the icons are not workking? <td width="29" style="padding-bottom: 42px;><a href="http://windchimes.co.in/blog" target="_blank"><img align="middle" title="blog" alt="blog" src="http://dl.dropbox.com/u/529534/windchimes/icon-blog.gif"></a></td><td width="29" style="padding-bottom: 42px;> <a href="http://www.linkedin.com/groups?gid=120310" target="_blank"><img align="middle" title="linkedin" alt="linkedin" src="http://dl.dropbox.com/u/529534/windchimes/icon-linkedin.gif"></a></td><td width="29" style="padding-bottom: 42px;> <a href="http://www.facebook.com/group.php?gid=72425590275" target="_blank"><img align="middle" title="facebook" alt="facebook" src="http://dl.dropbox.com/u/529534/windchimes/icon-facebook.gif"></a></td><td width="29" style="padding-bottom: 42px;> <a href="http://twitter.com/windchimesindia" target="_blank"><img align="middle" title="twitter" alt="twitter" src="http://dl.dropbox.com/u/529534/windchimes/icon-twitter.gif"></a></td><td width="29" style="padding-bottom: 42px;> <a href="http://www.youtube.com/user/Windchimesindia" target="_blank"><img align="middle" title="Youtube" alt="Youtube" src="http://dl.dropbox.com/u/529534/windchimes/icon-youtube.gif"></a><td>

    Read the article

< Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >