Search Results

Search found 21501 results on 861 pages for 'slow connection'.

Page 35/861 | < Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >

• Is my computer slow due to lack of swap

  - by Kristian Jensen

  A few months ago, I installed Ubuntu 12.04 alongside with Windows 7 on my Asus EEE-PC 1015bx. It has a tendency of freezing and when trying to investigate I found that a swap partition of only 256 MB had been created. The Asus EEE-PC 1015bx is born with 1 GByte RAM only and it is not possible to add further or exchange the existing 1 GByte with a larger card. When looking at the system monitor, it looks like all swap is being utilized along with 70-75% of the RAM, even with very few applications running. Can the lack of much swap space be the reason for my computer running slowly and at times freezing? How can I add a swap partition? Or should I add a swap file instead? At the moment, I see two partitions when viewing the system monitor: one 28.6 GByte ext4 partition which must be the one containing Ubuntu and one 100 GByte fuseblk partition which I assume is the one holding Windows. It shows that I have 18.6 GByte free space on the ext4 partition. Can I "take a bite" from the ext4 partition and convert this into a swap partition? I was thinking something like 3 GBytes for swap considering my limited RAM. I hope that someone can guide me through. Thank you. 20th Oct 2012 - Further details Thank you for below answer which I find very useful. I am certainly considering switching to one of your suggested shells as I can see from the Internet that many have posted that these require much fewer resources than ubuntu. It seems to me that lubuntu is the perfect match for my very limited computer. I will have to wait a few days, though, as I am presently limited by a very slow and restricted Internet connection via satellite. But will lubuntu install as simply another shell replacing unity or will it replace ubuntu all together? Will the software that I have installed under ubuntu still be accessible in lubuntu? And can I return to ubuntu if required? Regarding the actual question of swap: When I run gparted, it shows me that there is one ntfs partition of 100 GBytes from where it boots and the before mentioned ext4 partition of 28.6 GBytes is not mentioned. Could it be that my ubuntu installation resides inside this 100 GBytes ntfs partiotion? And if so, can I take a bite of this for my swap partition? Realising that gparted is shown in Danish, I hope that you can make out what I mean. System monitoring shows below details: Once again I sincerely hope that you can help. Thank you.

  Read the article

• Why is Double.Parse so slow?

  - by alexhildyard

  I was recently investigating a bottleneck in one of my applications, which read a CSV file from disk using a TextReader a line at a time, split the tokens, called Double.Parse on each one, then shunted the results into an object list. I was surprised to find it was actually the Double.Parse which seemed to be taking up most of the time.Googling turned up this, which is a little unfocused in places but throws out some excellent ideas:It makes more sense to work with binary format directly, rather than coerce strings into doublesThere is a significant performance improvement in composing doubles directly from the byte stream via long intermediariesString.Split is inefficient on fixed length recordsIn fact it turned out that my problem was more insidious and also more mundane -- a simple case of bad data in, bad data out. Since I had been serialising my Doubles as strings, when I inadvertently divided by zero and produced a "NaN", this of course was serialised as well without error. And because I was reading in using Double.Parse, these "NaN" fields were also (correctly) populating real Double objects without error. The issue is that Double.Parse("NaN") is incredibly slow. In fact, it is of the order of 2000x slower than parsing a valid double. For example, the code below gave me results of 357ms to parse 1000 NaNs, versus 15ms to parse 100,000 valid doubles.            const int invalid_iterations = 1000;            const int valid_iterations = invalid_iterations * 100;            const string invalid_string = "NaN";            const string valid_string = "3.14159265";            DateTime start = DateTime.Now;                        for (int i = 0; i < invalid_iterations; i++)            {                double invalid_double = Double.Parse(invalid_string);            }            Console.WriteLine(String.Format("{0} iterations of invalid double, time taken (ms): {1}",                invalid_iterations,                ((TimeSpan)DateTime.Now.Subtract(start)).Milliseconds            ));            start = DateTime.Now;            for (int i = 0; i < valid_iterations; i++)            {                double valid_double = Double.Parse(valid_string);            }            Console.WriteLine(String.Format("{0} iterations of valid double, time taken (ms): {1}",                valid_iterations,                ((TimeSpan)DateTime.Now.Subtract(start)).Milliseconds            )); I think the moral is to look at the context -- specifically the data -- as well as the code itself. Once I had corrected my data, the performance of Double.Parse was perfectly acceptable, and while clearly it could have been improved, it was now sufficient to my needs.

  Read the article

• OBIEE 11.1.1 - User Interface (UI) Performance Is Slow With Internet Explorer 8

  - by Ahmed A

  The OBIEE 11g UI is performance is slow in IE 8 and faster in Firefox.  For VPN or WAN users, it takes long time to display links on Dashboards via IE 8. Cause is IE 8 generates many HTTP 304 return calls and this caused the 11g UI slower when compared to the Mozilla FireFox browser. To resolve this issue, you can implement HTTP compression and caching. This is a best practice.Why use Web Server Compression / Caching for OBIEE? Bandwidth Savings: Enabling HTTP compression can have a dramatic improvement on the latency of responses. By compressing static files and dynamic application responses, it will significantly reduce the remote (high latency) user response time. Improves request/response latency: Caching makes it possible to suppress the payload of the HTTP reply using the 304 status code.  Minimizing round trips over the Web to re-validate cached items can make a huge difference in browser page load times. This screen shot depicts the flow and where the compression and decompression occurs: Solution: a. How to Enable HTTP Caching / Compression in Oracle HTTP Server (OHS) 11.1.1.x 1. To implement HTTP compression / caching, install and configure Oracle HTTP Server (OHS) 11.1.1.x for the bi_serverN Managed Servers (refer to "OBIEE Enterprise Deployment Guide for Oracle Business Intelligence" document for details). 2. On the OHS machine, open the file HTTP Server configuration file (httpd.conf) for editing. This file is located in the OHS installation directory.For example: ORACLE_HOME/Oracle_WT1/instances/instance1/config/OHS/ohs13. In httpd.conf file, verify that the following directives are included and not commented out: LoadModule expires_module "${ORACLE_HOME}/ohs/modules/mod_expires.soLoadModule deflate_module "${ORACLE_HOME}/ohs/modules/mod_deflate.so 4. Add the following lines in httpd.conf file below the directive LoadModule section and restart the OHS: Note: For the Windows platform, you will need to enclose any paths in double quotes ("), for example:Alias "/analytics ORACLE_HOME/bifoundation/web/app"<Directory "ORACLE_HOME/bifoundation/web/app"> Alias /analytics ORACLE_HOME/bifoundation/web/app#Pls replace the ORACLE_HOME with your actual BI ORACLE_HOME path<Directory ORACLE_HOME/bifoundation/web/app>#We don't generate proper cross server ETags so disable themFileETag noneSetOutputFilter DEFLATE# Don't compress imagesSetEnvIfNoCase Request_URI \.(?:gif|jpe?g|png)$ no-gzip dont-vary<FilesMatch "\.(gif|jpeg|png|js|x-javascript|javascript|css)$">#Enable future expiry of static filesExpiresActive onExpiresDefault "access plus 1 week"     #1 week, this will stops the HTTP304 calls i.e. generated by IE 8Header set Cache-Control "max-age=604800"</FilesMatch>DirectoryIndex default.jsp</Directory>#Restrict access to WEB-INF<Location /analytics/WEB-INF>Order Allow,DenyDeny from all</Location> Note: Make sure you replace above placeholder "ORACLE_HOME" to your correct path for BI ORACLE_HOME.For example: my BI Oracle Home path is /Oracle/BIEE11g/Oracle_BI1/bifoundation/web/app Important Notes: Above caching rules restricted to static files found inside the /analytics directory(/web/app). This approach is safer instead of setting static file caching globally. In some customer environments you may not get 100% performance gains in IE 8.0 browser. So in that case you need to extend caching rules to other directories with static files content. If OHS is installed on separate dedicated machine, make sure static files in your BI ORACLE_HOME (../Oracle_BI1/bifoundation/web/app) is accessible to the OHS instance. The following screen shot summarizes the before and after results and improvements after enabling compression and caching:

  Read the article

• Slow wifi on Ubuntu 12.04 wifi driver ath9k

  - by lunar

  For the last couple of days my wifi connection is extremely slow. I am pretty sure that it is caused by the driver. Can this be improved? lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"MyWiFi" Mode:Managed Frequency:2.437 GHz Access Point: 00:18:68:FE:7B:C7 Bit Rate=58.5 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=48/70 Signal level=-62 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:6960 Missed beacon:0 eth0 no wireless extensions. sudo lshw -class network *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: 74:f0:6d:34:c2:4e width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-31-generic-pae firmware=N/A ip=192.168.1.2 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d7400000-d740ffff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: c0 serial: 48:4b:38:78:f6:ae capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 link=no multicast=yes port=twisted pair resources: irq:51 memory:d3800000-d383ffff ioport:8000(size=128) lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 04f2:b1bb Chicony Electronics Co., Ltd Bus 001 Device 004: ID 0b05:1788 ASUSTek Computer, Inc. lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 425M] (rev a1) 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 04:00.0 USB controller: Fresco Logic Device 1400 (rev 01) 06:00.0 Ethernet controller: Atheros Communications Inc. AR8131 Gigabit Ethernet (rev c0) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) rfkill list all 0: hci0: Bluetooth Soft blocked: yes Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• JDBC Connection Pools in Glassfish

  - by Dana Singleterry

  I've been attempting to configure Glassfish 3.1.2.2 for ADF 11g and the need arose to create a jdbc connection pool to my Oracle XE 11g database. While this is really very trivial there were no samples of how to do this and documentation, while good, rarely ever provides concrete examples. After fumbling around for a few minutes searching for an example I gave up and figured it out on my own. Here are the steps for any of you that may be in need. This can be done either via the Glassfish command line tool asadmin or through the admin console. I'm doing this through the admin console. Start Glassfish and connect to the admin console with the credentials you defined at installation: http://localhost:4848 Navigate to Resources | JDBC | JDBC Connection Pools and select New. Be sure to enter Resource Type & Datasource Classname under General Settings tab. You can go with the defaults for Pool Settings etc... View Image Go to the Additional Properties tab and create username, password, and url properties with the respective values. View Image Navigate to Resources | JDBC | JDBC Resources and select New. Be sure to enter the JNDI Name and select the Pool Name for the jdbc connection pool you created previously. View Image Navigate to Configurations | server-config | JVM Settings and select the JVM Options tab. Add the values highlighted: -Doracle.jdbc.J2EE13Compliant=true is used to make sure the driver behaves in a JEE-compliant manner. View Image To integrate the JDBC driver into a GlassFish Server domain, copy the JAR files into the domain-dir/lib directory, then restart the server. The JAR file for the Oracle 11 database driver is ojdbc6dms.jar. An upcoming entry will demonstrate configuring Glassfish for Oracle ADF Applications.

  Read the article

• Eclipse Indigo very slow on Kubuntu 12.04

  - by herom

  hello fellow ubuntu users! I have a really big problem with my Eclipse Indigo running on Kubuntu 12.04 32bit, Dell Vostro 3500, Intel(R) Core(TM) i5 CPU M480 @ 2.67 (as cat /proc/cpuinfo said). It has 4GB RAM. cat /proc/cpuinfo brings up the following: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 37 model name : Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz stepping : 5 microcode : 0x2 cpu MHz : 1197.000 cache size : 3072 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt lahf_lm ida arat dts tpr_shadow vnmi flexpriority ept vpid bogomips : 5319.85 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 37 model name : Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz stepping : 5 microcode : 0x2 cpu MHz : 1197.000 cache size : 3072 KB physical id : 0 siblings : 4 core id : 2 cpu cores : 2 apicid : 4 initial apicid : 4 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt lahf_lm ida arat dts tpr_shadow vnmi flexpriority ept vpid bogomips : 5319.88 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 2 vendor_id : GenuineIntel cpu family : 6 model : 37 model name : Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz stepping : 5 microcode : 0x2 cpu MHz : 1197.000 cache size : 3072 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt lahf_lm ida arat dts tpr_shadow vnmi flexpriority ept vpid bogomips : 5319.88 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 3 vendor_id : GenuineIntel cpu family : 6 model : 37 model name : Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz stepping : 5 microcode : 0x2 cpu MHz : 1197.000 cache size : 3072 KB physical id : 0 siblings : 4 core id : 2 cpu cores : 2 apicid : 5 initial apicid : 5 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt lahf_lm ida arat dts tpr_shadow vnmi flexpriority ept vpid bogomips : 5319.88 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: java -version brings the following: java version "1.7.0_04" Java(TM) SE Runtime Environment (build 1.7.0_04-b20) Java HotSpot(TM) Server VM (build 23.0-b21, mixed mode) it's the Oracle Java, not OpenJDK. I try to develop an Android application for GoogleTV and Eclipse is this slow, that it can't follow my typing (extreme lagging!!), but this issue makes it almost impossible! here is my eclipse.ini file: -startup plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar --launcher.library plugins/org.eclipse.equinox.launcher.gtk.linux.x86_1.1.100.v20110505 -product org.eclipse.epp.package.java.product --launcher.defaultAction openFile -showsplash org.eclipse.platform --launcher.XXMaxPermSize 512m --launcher.defaultAction openFile -vmargs -Dosgi.requiredJavaVersion=1.5 -Declipse.p2.unsignedPolicy=allow -Xms256m -Xmx512m -Xss4m -XX:PermSize=128m -XX:MaxPermSize=384m -XX:CompileThreshold=5 -XX:MaxGCPauseMillis=10 -XX:MaxHeapFreeRatio=70 -XX:+CMSIncrementalPacing -XX:+UnlockExperimentalVMOptions -XX:+UseG1GC -XX:+UseFastAccessorMethods -XX:ReservedCodeCacheSize=64m -Dcom.sun.management.jmxremote has anybody faced the same problems? can anybody help me on this problem? it's really urgent as I'm sitting here at my company and am not able to do anything productive...

  Read the article

• Very slow KVM in Ubuntu 12.04

  - by Guy Fawkes

  I use Ubuntu 12.04 64-bit and KVM, my CPU is Core i5 3.3 GHz and I have 8 GB of DDR3 RAM. I run Windows 7 in KVM and it's extremely slow. My co-worker use Debian on the same PC configuration and can run Windows 7 extremely fast! Where can be my problem? sudo cat /etc/libvirt/qemu/windows.xml <!-- WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE OVERWRITTEN AND LOST. Changes to this xml configuration should be made using: virsh edit windows or other application using the libvirt API. --> <domain type='kvm'> <name>windows</name> <uuid>5c685175-baea-0ca6-591f-8269d923ffb8</uuid> <memory>2097152</memory> <currentMemory>2097152</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64' machine='pc-1.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='localtime'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/windows.img'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='network'> <mac address='52:54:00:94:63:91'/> <source network='default'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes'/> <sound model='ich6'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </sound> <video> <model type='vga' vram='262144' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> </domain>

  Read the article

• Slow boot on Ubuntu 12.04, probable cause the network connection

  - by Ravi S Ghosh

  I have been having rather slow boot on Ubuntu 12.04. Lately, I tried to figure out the reason and it seems to be the network connection which does not get connected and requires multiple attempts. Here is part of dmesg [ 2.174349] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [ 2.174352] EXT4-fs (sda2): write access will be enabled during recovery [ 2.308172] firewire_core: created device fw0: GUID 384fc00005198d58, S400 [ 2.333457] usb 7-1.2: new low-speed USB device number 3 using uhci_hcd [ 2.465896] EXT4-fs (sda2): recovery complete [ 2.466406] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.589440] usb 7-1.3: new low-speed USB device number 4 using uhci_hcd **[ 18.292029] ADDRCONF(NETDEV_UP): eth0: link is not ready** [ 18.458958] udevd[377]: starting version 175 [ 18.639482] Adding 4200960k swap on /dev/sda5. Priority:-1 extents:1 across:4200960k [ 19.314127] wmi: Mapper loaded [ 19.426602] r592 0000:09:01.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 19.426739] r592: driver successfully loaded [ 19.460105] input: Dell WMI hotkeys as /devices/virtual/input/input5 [ 19.493629] lp: driver loaded but no devices found [ 19.497012] cfg80211: Calling CRDA to update world regulatory domain [ 19.535523] ACPI Warning: _BQC returned an invalid level (20110623/video-480) [ 19.539457] acpi device:03: registered as cooling_device2 [ 19.539520] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6 [ 19.539568] ACPI: Video Device [M86] (multi-head: yes rom: no post: no) [ 19.578060] Linux video capture interface: v2.00 [ 19.667708] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 19.763171] r852 0000:09:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 19.763258] r852: driver loaded successfully [ 19.854769] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.2/7-1.2:1.0/input/input7 [ 19.854864] generic-usb 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1.2/input0 [ 19.878605] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.2/7-1.2:1.1/input/input8 [ 19.878698] generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1.2/input1 [ 19.902779] input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.3/7-1.3:1.0/input/input9 [ 19.925034] generic-usb 0003:046D:C063.0003: input,hidraw2: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:1d.1-1.3/input0 [ 19.925057] usbcore: registered new interface driver usbhid [ 19.925059] usbhid: USB HID core driver [ 19.942362] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:63ea) [ 19.947004] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input10 [ 19.947075] usbcore: registered new interface driver uvcvideo [ 19.947077] USB Video Class driver (1.1.1) [ 20.145232] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 20.145235] Copyright(c) 2003-2011 Intel Corporation [ 20.145327] iwlwifi 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 20.145357] iwlwifi 0000:04:00.0: setting latency timer to 64 [ 20.145402] iwlwifi 0000:04:00.0: pci_resource_len = 0x00002000 [ 20.145404] iwlwifi 0000:04:00.0: pci_resource_base = ffffc90000674000 [ 20.145407] iwlwifi 0000:04:00.0: HW Revision ID = 0x0 [ 20.145531] iwlwifi 0000:04:00.0: irq 46 for MSI/MSI-X [ 20.145613] iwlwifi 0000:04:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 [ 20.145720] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 20.167535] iwlwifi 0000:04:00.0: device EEPROM VER=0x11f, CALIB=0x4 [ 20.167538] iwlwifi 0000:04:00.0: Device SKU: 0Xf0 [ 20.167567] iwlwifi 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 20.172779] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 20.172783] Disabling lock debugging due to kernel taint [ 20.250115] [fglrx] Maximum main memory to use for locked dma buffers: 3759 MBytes. [ 20.250567] [fglrx] vendor: 1002 device: 9553 count: 1 [ 20.251256] [fglrx] ioport: bar 1, base 0x2000, size: 0x100 [ 20.251271] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.251277] pci 0000:01:00.0: setting latency timer to 64 [ 20.251559] [fglrx] Kernel PAT support is enabled [ 20.251578] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [ 20.310385] iwlwifi 0000:04:00.0: loaded firmware version 8.83.5.1 build 33692 [ 20.310598] Registered led device: phy0-led [ 20.310628] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 20.372306] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 20.411015] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 [ 20.454232] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 [ 20.545636] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 20.545640] cfg80211: World regulatory domain updated: [ 20.545642] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 20.545644] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.545647] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.545649] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.545652] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.545654] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.609484] type=1400 audit(1340502633.160:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=693 comm="apparmor_parser" [ 20.609494] type=1400 audit(1340502633.160:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=642 comm="apparmor_parser" [ 20.609843] type=1400 audit(1340502633.160:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=693 comm="apparmor_parser" [ 20.609852] type=1400 audit(1340502633.160:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=642 comm="apparmor_parser" [ 20.610047] type=1400 audit(1340502633.160:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=693 comm="apparmor_parser" [ 20.610060] type=1400 audit(1340502633.160:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=642 comm="apparmor_parser" [ 20.610476] type=1400 audit(1340502633.160:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=814 comm="apparmor_parser" [ 20.610829] type=1400 audit(1340502633.160:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=814 comm="apparmor_parser" [ 20.611035] type=1400 audit(1340502633.160:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=814 comm="apparmor_parser" [ 20.661912] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 20.661982] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 20.662013] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 20.770289] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 20.770689] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 20.770786] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X [ 20.770815] snd_hda_intel 0000:01:00.1: setting latency timer to 64 [ 20.994040] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 20.994189] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 [ 21.554799] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 21.554802] vesafb: scrolling: redraw [ 21.554804] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 21.557342] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011800000, using 3072k, total 3072k [ 21.557498] Console: switching to colour frame buffer device 128x48 [ 21.557516] fb0: VESA VGA frame buffer device [ 21.987338] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 22.184693] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 27.362440] iwlwifi 0000:04:00.0: RF_KILL bit toggled to disable radio. [ 27.436988] init: failsafe main process (986) killed by TERM signal [ 27.970112] ppdev: user-space parallel port driver [ 28.198917] Bluetooth: Core ver 2.16 [ 28.198935] NET: Registered protocol family 31 [ 28.198937] Bluetooth: HCI device and connection manager initialized [ 28.198940] Bluetooth: HCI socket layer initialized [ 28.198941] Bluetooth: L2CAP socket layer initialized [ 28.198947] Bluetooth: SCO socket layer initialized [ 28.226135] Bluetooth: RFCOMM TTY layer initialized [ 28.226141] Bluetooth: RFCOMM socket layer initialized [ 28.226143] Bluetooth: RFCOMM ver 1.11 [ 28.445620] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 28.445623] Bluetooth: BNEP filters: protocol multicast [ 28.524578] type=1400 audit(1340502641.076:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1052 comm="apparmor_parser" [ 28.525018] type=1400 audit(1340502641.076:12): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1052 comm="apparmor_parser" [ 28.629957] type=1400 audit(1340502641.180:13): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1105 comm="apparmor_parser" [ 28.630325] type=1400 audit(1340502641.180:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1105 comm="apparmor_parser" [ 28.630535] type=1400 audit(1340502641.180:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1105 comm="apparmor_parser" [ 28.645266] type=1400 audit(1340502641.196:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1104 comm="apparmor_parser" **[ 28.751922] ADDRCONF(NETDEV_UP): wlan0: link is not ready** [ 28.753653] tg3 0000:08:00.0: irq 49 for MSI/MSI-X **[ 28.856127] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 28.857034] ADDRCONF(NETDEV_UP): eth0: link is not ready** [ 28.871080] type=1400 audit(1340502641.420:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1108 comm="apparmor_parser" [ 28.871519] type=1400 audit(1340502641.420:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1108 comm="apparmor_parser" [ 28.874905] type=1400 audit(1340502641.424:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1113 comm="apparmor_parser" [ 28.875354] type=1400 audit(1340502641.424:20): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1113 comm="apparmor_parser" [ 30.477976] tg3 0000:08:00.0: eth0: Link is up at 100 Mbps, full duplex [ 30.477979] tg3 0000:08:00.0: eth0: Flow control is on for TX and on for RX **[ 30.478390] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready** [ 31.110269] fglrx_pci 0000:01:00.0: irq 50 for MSI/MSI-X [ 31.110859] [fglrx] Firegl kernel thread PID: 1327 [ 31.111021] [fglrx] Firegl kernel thread PID: 1329 [ 31.111408] [fglrx] Firegl kernel thread PID: 1330 [ 31.111543] [fglrx] IRQ 50 Enabled [ 31.712938] [fglrx] Gart USWC size:1224 M. [ 31.712941] [fglrx] Gart cacheable size:486 M. [ 31.712945] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 31.712948] [fglrx] Reserved FB block: Unshared offset:fc2b000, size:3d5000 [ 31.712950] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 [ 41.312020] eth0: no IPv6 routers present As you can see I get multiple instances of [ 28.856127] ADDRCONF(NETDEV_UP): eth0: link is not ready and then finally it becomes read and I get the message [ 30.478390] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready. I searched askubuntun, ubuntuforum, and the web but couldn't find a solution. Any help would be very much appreciated. Here is the bootchart

  Read the article

• Brother MFC-J470DW scan function "Check Connection"

  - by user292599

  I have a Brother MFC-J470DW printer that I have connected to a Linux desktop (running Ubuntu 14.04) using a wireless router network. The printer works fine for printing and copying, but now I want to add the scan function. To set up the scan function, I went to the Brother web page for this printer: http://support.brother.com/g/b/downloadlist.aspx?c=eu_ot&lang=en&prod=mfcj470dw_us_eu_as&os=128 and under Scanner Drivers selected "Scanner driver 64bit (deb package)", "Scan-key-tool 64bit (deb package)", and "Scanner Setting file (deb package)". For each package, I clicked the EULA, and selected "open with Ubuntu Software Center". Then after the USC window pops up, I click on Install and the red line goes from left to right. In each case, the USC window then had a green checkmark and the Install box changes to Reinstall (that's how you know it worked). So now I try it out. Hitting the Scan button on the printer, selecting "Scan to file", and hitting ok produces the message "Check Connection". I checked the Brother Linux Information FAQ (scanner) page and the 14th question seems the same as mine: When I try to use the scan key on my network connected machine, I receive the error "Check connection" or I can not select anything except "scan to FTP". I explored the solution given for this FAQ, but found from ifconfig that I am already using eth0, the default setting, so presumably that is not the problem. I also found brscan-skey installed in /usr/bin and did drrm@drrmlinux2:~$ brscan-skey -t drrm@drrmlinux2:~$ brscan-skey but that didn't help - I still get the "Check connection" message. What can you suggest to fix this problem?

  Read the article

• Reverse WiFi to Broadcast connection coming from a USB device

  - by Daniel Clem

  I am using the app called Clockworkmod Tether. It connects using a script ( command line " gksu ./run.sh " ) on the computer. All my programs connect to the internet perfectly, minitube, midori, transmission torrents. But the network manager does not show any connection, wired or wireless. So this may cause issues? What I want to do is take this connection, and be able to share it some way, any way, by wireless. This Acer Timeline "Aspire 5810TZ" does have an Ethernet, so wired out to a router might be an option. But I would prefer to simply reverse the Wireless card to broadcast out to about 2 or 3 devices. Is this possible? Yes I have taken a look at the other questions already posted here, but the answers are 1 year old or older, and not clear at all. I am moderately comfortable (4.5 out of 10 ) on the command line. But pretty much need line by line directions for what commands are needed and what order, ect. Edit I have already tried the method of "Left click network manager, Create New Wireless Network" It is created fine, and I am able to connect to it with a tablet, but am un-able to get an outside connection with it. Using the "Shared to other computers" option because DHCP doesn't seem to work, and WEP Passphrase Security. I get an IP address on the connected device. But as I said, won't bring up any outside webpages or the like. So perhaps this is the wrong approach?

  Read the article

• Wired connection problem through router

  - by tommypincha

  I'm having trouble to connect my Ubuntu 11.10 to internet through ethernet. I installed a router to get Wi-Fi and now (by a wired connection) I can't have internet with ubuntu (but I can with Windows 7). I see several attempts per minute of the network-manager to get a connection, but after a minute it stops trying. Here are a couple of outputs from key files: cat /etc/network/interfaces auto lo iface lo inet loopback and ifconfig -a eth0 Link encap:Ethernet HWaddr 00:16:76:e4:a6:e8 inet6 addr: fe80::216:76ff:fee4:a6e8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:117 dropped:0 overruns:0 frame:117 TX packets:50 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:12221 (12.2 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:582 errors:0 dropped:0 overruns:0 frame:0 TX packets:582 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:46024 (46.0 KB) TX bytes:46024 (46.0 KB) I tried reconnecting the modem and the router and reconnecting the ethernet cable but nothing... I tried other solutions from other posts (this one has a similar issue Wired connection not working) but again nothing. My IP is dynamic. A couple of things I see and did: I see no inet addr, only inet6. I ignored ipv6 from the internet connections, and restarted the network-manager service and nothing. A difference with the post I mentioned is the RX packets with errors I have, is this a clue of the problem? Any help would be appreciated, Thanks!

  Read the article

• How to solve: "Connect to host some_hostname port 22: Connection timed out"

  - by Aufwind

  I have two Ubuntu machines. Both have openssh-client and openssh-server installed on them. ssh-ing from machine G (fresh Ubuntu 11.10 installation) to machine K works great. But ssh-ing from machine K to machine G results always in the Error: Connect to host some_hostname port 22: Connection timed out I went through the troubleshooting section of help.ubuntu.com and I got the following results: ps -A | grep sshd # results in 848 ? 00:00:00 sshd - sudo ss -lnp | grep sshd # results in 0 128 :::22 :::* users:(("sshd",848,4)) 0 128 *:22 *:* users:(("sshd",848,3)) - ssh -v localhost # works! - sudo ufw status verbose # yields: "Status: inactive" I haven't change anything in the config file. What can I do to locate the Problem and solve it? Glad about every hint! Edit: ping was succesful in both directions! I did a telnet <machineK> 22 from machin G which resulted in Trying and then in telnet: Unable to connect to remote host: Connection timed out. But telnet the other way around worked just fine! Edit 2: ssh start/running, process 966 # yields: ssh start/running, process 966 /etc/hostname # contains my hostname, let's call it blubb /etc/hosts # contains the following 127.0.0.1 localhost # 127.0.1.1 blubb 129.26.68.74 blubb # I added this! - sudo service ufw status # yields: ufw start/running I installed Gufw and set it to ON. Then I selected from Incoming the option ALLOW. Then I sshed to another machine from where I sshed back to my machine. Still the same error as above: connect to host blubb port 22: Connection timed out Any more hints, what I can check?

  Read the article

• Ethernet Connection Unavailable

  - by fabikw

  I'm running Ubuntu Server 12.04 on a laptop with an Intel NIC (driver e1000e). When I connect the ethernet port to the internet (college network, DHCP) it works out of the box. Now I'm trying to connect it to a networked USRP (if you want to know what it is). A friend of mine managed to do this in his laptop (running regular Ubuntu 12.04) just by setting up a new Wired connection in the Network Manager with appropriate addresses. However, when I do the same, no wired connections are available. The output of nmcli -p dev is =========================================== Status of devices =========================================== DEVICE TYPE STATE ------------------------------------------- wlan0 802-11-wireless connected eth0 802-3-ethernet unavailable but the cable is connected to the device and the device is powered up. Any idea how to solve this? UPDATE: After stopping the network-manager service, setting up the connection manually and starting the service again, it now detects the ethernet connection. However, the device still can't receive data and doesn't answer to pings. UPDATE 2: As suggested I tried using a cross over cable but the result is exactly the same. However, I found out that connecting the device to the dock (as opposed to directly to the laptop) works fine. I know that the ethernet port in the laptop works fine, because connecting to the network through it works. Is it possible that the port in the laptop doesn't support Gb Ethernet (because that's what the device requires) but the one in the dock does?

  Read the article

• Ubuntu 12.04 + Bluetooth problems with maintaining connection

  - by ifndefx

  I have an Apple Wireless Mouse, Apple Wireless Keyboard, Apple Wireless Trackpad, and a pair of headphones. All of these connect to the computer via a Bluetooth dongle. After several hours I've managed to get the devices paired (all except the headphones) with the computer. However, I'm facing a problem where a connection can't be maintained even with one device. I first started with the gnome bluetooth applet, this couldn't even pick up devices, so I installed blueman, and this at least detected the devices but it couldn't keep the connection going. Then i read somewhere to get hidd installed and use the command line using the mac address of the device (which I got from blueman) and this worked really well, the connection was stable, but there's still a couple of issues that I need help with: If I am to use hidd I need to execute this via terminal, which means for the keyboard and the mouse I need to have two of each. This doesn't make sense. I need the bluetooth daemon to have started with the devices picked up a lot earlier, and especially at grub bootloader. The mouse and the trackpad both work if i use hidd, however, I cannot get the right mouse to work nor the scroll wheel to work. The headphones don't work period, they don't work with any of the bluetooth applets, and with hidd either. When I use blueman aplet, it attempts to pair and states 'Authentication Rejected". The headphone is Phillips SHB9100. If someone can help me with this, I would be grateful.

  Read the article

• I want to access internet on ubuntu 12.04.1 guest system from windows 7 64bit host in virtualbox 4.1.18 How to do so?

  - by Rohit

  I am using Windows 7 64bit as host system and i have installed ubuntu 12.04.1 in virtual box as stated above. I have a dsl connection which works well on my host system and now I need to access the same connection on my guest ubuntu. I cant see any such settings in ubuntu. I am total biginner and dont know anything about linux. Win 7 is showing unknown network. Please guide me from the scratch. Thank you.

  Read the article

• problems establishing ssh connection

  - by Superbyte

  since two days I am facing a really weird problem. I have receantly installed ubuntu server 14.04 LTS on a workstation. It has a fix IP address, which I can successfully ping from other computers in the network. But when I try to establish a ssh connection from a windows computer via putty I get some strange errors, which I cannot fix. The Problem is that putty takes a really long time trying to establish a connection. After about 10 seconds I get the following error: Network error: Software caused connection abort But when I click the Restart Session option a several times after putty shows the error message, I can login in. But now comes the other problem. When the login appears on the putty console I type in the user, but it really takes a long time until I can type in the password to login. This is what I already tried: sshd: ALL in etc/hosts.allow commented line session optional pam_motd.so in etc/pam.d/login and etc/pam.d/sshd configured the firewall with: sudo iptables -A INPUT -p tcp --dport ssh -j ACCEPT checked if ssh server is listening on port 22 UseDNS no in etc/ssh/sshd_config I hope someone can help me, because this problem is really annoying. Thanks in regard

  Read the article

• How do I close a database connection in a WCF service?

  - by Dan

  I have been unable to find any documentation on properly closing database connections in WCF service operations. I have a service that returns a streamed response through the following method. public virtual Message GetData() { string sqlString = BuildSqlString(); SqlConnection conn = Utils.GetConnection(); SqlCommand cmd = new SqlCommand(sqlString, conn); XmlReader xr = cmd.ExecuteXmlReader(); Message msg = Message.CreateMessage( OperationContext.Current.IncomingMessageVersion, GetResponseAction(), xr); return msg; } I cannot close the connection within the method or the streaming of the response message will be terminated. Since control returns to the WCF system after the completion of that method, I don't know how I can close that connection afterwards. Any suggestions or pointers to additional documentation would be appreciated. Dan

  Read the article

• How do I close a database connection being used to produce a streaming result in a WCF service?

  - by Dan

  I have been unable to find any documentation on properly closing database connections in WCF service operations. I have a service that returns a streamed response through the following method. public virtual Message GetData() { string sqlString = BuildSqlString(); SqlConnection conn = Utils.GetConnection(); SqlCommand cmd = new SqlCommand(sqlString, conn); XmlReader xr = cmd.ExecuteXmlReader(); Message msg = Message.CreateMessage( OperationContext.Current.IncomingMessageVersion, GetResponseAction(), xr); return msg; } I cannot close the connection within the method or the streaming of the response message will be terminated. Since control returns to the WCF system after the completion of that method, I don't know how I can close that connection afterwards. Any suggestions or pointers to additional documentation would be appreciated.

  Read the article

• How do I properly handle a faulted WCF connection?

  - by mafutrct

  In my client program, there is a WCF connection that is opened at startup and supposedly stays connected til shutdown. However, there is a chance that the server closes due to unforeseeable circumstances (imagine someone pulling the cable). Since the client uses a lot of contract methods in a lot of places, I don't want to add a try/catch on every method call. I've got 2 ideas for handling this issue: Create a method that takes a delegate and executes the delegate inside a try/catch and returns an Exception in case of a known exception, or null else. The caller has to deal with nun-null results. Listen to the Faulted event of the underlying CommunicationObject. But I don't see how I could handle the event except for displaying some error message and shutting down. Are there some best practices for faulted WCF connection that exist for app lifetime?

  Read the article

• Best way to manage connection strings in a project containing both Classic ASP and ASP.Net 1.1 code?

  - by JamesEggers

  I have a project that I have inherited that is primarily a Classic ASP application; however, intermixed in the the application are a handful of ASP.net pages. Some of the ASP.net pages are 1.1 and do not use a code behind model. The classic ASP pages have a number of /include directories where there's a file for database connections. The ASP.Net pages have the connection string hard coded in in their code. I'm trying to clean up this mess of connection strings so it's easier to manage across development environments. Does anyone have any recommendations on how I may be able to effectively do this that will work for both Classic ASP and ASP.Net pages? Thanks

  Read the article

• Which connection string for MySql ODBC connector 5.2.6?

  - by stighy

  it seems i can't make work a connection to MySql using ODBC connector 5.2.6. In a 64 bit environment, in a VBA excel application, i use this string, but it not work: "Driver={MySQL ODBC 5.2 Driver}; Server=myserver;Database=mydb;User=readonly;Password=mypass;Option=3" I have also used Driver={MySQL ODBC 5.2w Driver} and Driver={MySQL ODBC 5.2a Driver} But the error is: ODBC driver unknow. Can someone help me ? Ps: it works with a DSN setted, but i would like to use a connection string so i don't go to each user computer and set a DSN. Thanks

  Read the article

• Can I create support multiple database transactions on a single connection?

  - by draezal

  I have created a HyperSQL Database. I was just wondering whether I could run multiple transactions on a single connection. I didn't want to spawn a new connection for each transaction due to the overhead associated with this. Looking at some similar questions the suggestion appeared to be to create a pool of database connections and then block waiting for one to become available. This is a workable, but not desirable solution. Background Info (if this is relevant to the answer). My application will create a new thread when some request comes in. This request will require a database transaction. Then some not insignificant time later this transaction will be committed. Any advice appreciated :)

  Read the article

• How can I catch connection requests in my framework?

  - by Falx

  I'm building a framework (OSGi-like) where other parties can program a bundle for. But I want my framework to manage the QoS of the connection-requests that the other parties will do. The easy solution would be to ask them to use (or enforce them to use - although I don't know how) a specific ConnectionRequest bundle of the framework. The problem with this approach is that they wouldn't be able to use any of their own preferred libraries that is counting on the standard Java libraries to make a connection(request). So I wondered if there is a way in Java to catch all the requested connections, so I can add some code about my QoS handling, before its is sent of to the underlaying layer?

  Read the article

• Is there a Perl module to test internet connection speed?

  - by sid_com

  Does anybody know a module to test the speed of internet-connection?

  Read the article

• What can cause reset connection when running PHP script?

  - by marcin_koss

  I've developed a web application with CodeIgniter that works perfectly on my local machines (one with windows and one with Linux). When I moved it to my hosting server, connection gets reset when running one particular PHP script that does a few MySQL queries and some operations on arrays. The data I'm querying is small, just a few tables with up to 25 records. Firefox returns "The connection was reset" after maybe 2-3 seconds. I checked the servers error logs but there was nothing there. Unfortunately I don't have access to Apache error logs. What can cause this behavior?

  Read the article

< Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >