Search Results

Search found 111524 results on 4461 pages for 'user mode linux'.

Page 35/4461 | < Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >

  • find files where group permissions equal user permissions

    - by Jayen
    Is it possible to do something like find -perm g=u? I say "like" because -perm mode requires mode to specify all the bits, not just g, and because I can't put u on the right side of the =, like I can with the chmod command: you can specify exactly one of the letters ugo: the permissions granted to the user who owns the file (u), the permissions granted to other users who are members of the file's group (g), and the permissions granted to users that are in neither of the two preceding categories (o). At the moment, I'm doing find | xargs -d \\n ls -lartd | egrep '^.(...)\1 which is just ugly. Thanks.

    Read the article

  • Linux Flash Player with 2 Monitors: always full-screen on primary monitor

    - by CarlF
    My setup at home uses a laptop, with a larger external monitor in addition to the built-in LCD panel, which is primary. I can see the larger monitor from the rest of the room and use it as my TV, for playing DVDs and various types of web video. However, it isn't ideal for Flash video. For instance, if I watch a video from Hulu or any other Flash-based site, I can expand it to full-screen mode. However, no matter which monitor the browser window is on, the full-screen mode is always on the laptop LCD panel, which is both too small and not visible from most of the room. Does anyone know of a way to force the Flash video to play full-screen on the monitor I select instead of the primary? My video chipset is NVidia, using kernel 2.6.31 (Ubuntu). Thanks.

    Read the article

  • USB Mouse and Keyboard not working in Linux 4 Tegra

    - by Sijo
    I am a new person in Tegra Linux development. I have Tamontem NG Evaluation board with Tegra 3 Chip. I installed L4T sample file system from NVIDIA tegra Resources (https://developer.nvidia.com/linux-tegra) and installed the file system as described in the documentation provided in NVIDIA site. Already these was an SD card with L4T running. i dont want to change the boot loader. So I copied the boot.scr.uimg to root (/) folder and uImage to boot(/boot/) and it starts booting from the existing SD card. After that while booting, some errors occurred in some Bluetooth devices (there is no bluetooth device in the board). So I disabled Bluetooth by giving the following command sudo mv /etc/init/bluetooth.conf /etc/init/bluetooth.conf.noexec Now the problem is that mouse and keyboard are not working. So i cannot login. Even though i installed desktop, the mouse and keyboard are not working. But mouse and keyboard are enumerating. lsusb command is showing the USB mouse and keyboard. The installed file system is Ubuntu 13.04. Linux Kernel version is 3.1 What to do. Please help.Thanks in Advance.

    Read the article

  • Blender refuses to start

    - by Sekhemty
    I'm trying to run Blender under Linux, but I'm unable to do that, whenever I try I get some errors. I'm using Kubuntu 12.04 with KDE 4.11.1. This is my video card: ~$ lspci | grep VGA 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV610/M74 [Mobility Radeon HD 2400 XT] I used to have installed the fglrx proprietary Catalyst drivers, but lately they gave me some system-wide problems and I had to revert to the open source Mesa drivers (I don't think that these details are important, but just in case, the whole story is here). Whit the fglrx drivers Blender was running fine, but now, whenever I try to start it, I get this error message (some parts are in italian, but I think that they are easily understandable): ~$ blender connect failed: No such file or directory Writing: /tmp/blender.crash.txt Errore di segmentazione (core dump creato) The content of /tmp/blender.crash.txt is as follows: # Blender 2.68 (sub 5), Revision: 60150 # backtrace /usr/lib/blender/blender() [0x877a41f] [0xb7756400] /usr/lib/i386-linux-gnu/libLLVM-3.0.so.1(_ZN4llvm3ARM8SPRClassC1Ev+0x15) [0xa8f4a9d5] /usr/lib/i386-linux-gnu/libLLVM-3.0.so.1(+0x25ca48) [0xa8eefa48] /lib/ld-linux.so.2(+0xeeab) [0xb7765eab] /lib/ld-linux.so.2(+0xef94) [0xb7765f94] /lib/ld-linux.so.2(+0x12fa6) [0xb7769fa6] /lib/ld-linux.so.2(+0xeccf) [0xb7765ccf] /lib/ld-linux.so.2(+0x127f4) [0xb77697f4] /lib/i386-linux-gnu/libdl.so.2(+0xbe9) [0xb4ff9be9] /lib/ld-linux.so.2(+0xeccf) [0xb7765ccf] /lib/i386-linux-gnu/libdl.so.2(+0x133a) [0xb4ffa33a] /lib/i386-linux-gnu/libdl.so.2(dlopen+0x47) [0xb4ff9c97] /usr/lib/i386-linux-gnu/mesa/libGL.so.1(+0x3cbf0) [0xb7717bf0] /usr/lib/i386-linux-gnu/mesa/libGL.so.1(+0x4079d) [0xb771b79d] /usr/lib/i386-linux-gnu/mesa/libGL.so.1(+0x1a3aa) [0xb76f53aa] /usr/lib/i386-linux-gnu/mesa/libGL.so.1(glXQueryVersion+0x2e) [0xb76f0cee] /usr/lib/blender/blender(_ZN15GHOST_WindowX11C1EP15GHOST_SystemX11P9_XDisplayRK10STR_Stringiijj18GHOST_TWindowStatei25GHOST_TDrawingContextTypebbt+0x11c) [0x8f54aec] /usr/lib/blender/blender(_ZN15GHOST_SystemX1112createWindowERK10STR_Stringiijj18GHOST_TWindowState25GHOST_TDrawingContextTypebbti+0xd7) [0x8f4f4a7] /usr/lib/blender/blender(GHOST_CreateWindow+0xb6) [0x8f4cf86] /usr/lib/blender/blender(wm_window_add_ghostwindows+0x205) [0x8799be5] /usr/lib/blender/blender(WM_check+0x50) [0x877b670] /usr/lib/blender/blender(wm_homefile_read+0x111) [0x87859f1] /usr/lib/blender/blender(WM_init+0xd2) [0x8787872] /usr/lib/blender/blender(main+0xe6e) [0x873848e] /lib/i386-linux-gnu/libc.so.6(__libc_start_main+0xf3) [0xb4e694d3] /usr/lib/blender/blender() [0x8778a99] The only thing that I can guess from this report is that the mesa drivers are somewhat involved, as I already suspected, but I don't have a clue on what I need to do to try to solve the issue.

    Read the article

  • delete key on linux does not work

    - by Gauthier Fleutot
    Hi! My delete key does not work in ubuntu, it does nothing. I understand that this is a common problem, but I could solve it with the information I found elsewhere. I ran xev. Pressing the 'a' key gives: KeyRelease event, serial 30, synthetic NO, window 0x2c00001, root 0x1a6, subw 0x0, time 7255643, (-113,-107), root:(425,300), state 0x2010, keycode 38 (keysym 0x61, a), same_screen YES, XLookupString gives 1 bytes: (61) "a" XFilterEvent returns: False Pressing 'Delete' gives: FocusOut event, serial 30, synthetic NO, window 0x2c00001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 30, synthetic NO, window 0x2c00001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 30, synthetic NO, window 0x0, keys: 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 From there I don't know what to do. Help?

    Read the article

  • Issue booting Linux Mint from Live CD?

    - by Vee
    I had Windows 8 and Linux Mint 15 dual booted on my laptop. When I first installed Linux, I wasn't able to load into because the grub would not show. To fix this, I used boot-repair from a Live CD. This time, I updated to Windows 8.1 and it showed a watermark telling me my secure boot wasn't configured properly. I then went and enabled secure boot (BIOS) and I believe it was after that that the Grub would not show once again. I tried to boot from a Linux CD again but when I try, it gives me the following errors: error: failure reading sector 0x0 from 'hd1' error: you need to load the kernel first. Press any key to continue... Before, it was giving me an error with sector 0x6d200 or something instead of 0x0. I am completely unsure of what to do. I do not know what other details to give except that this my have happened after I enabled secure boot, and I actually clicked reset to default setting so I am unsure if any other settings were changed in the BIOS menu.

    Read the article

  • Linux Mounting Problem

    - by Sam
    I have an Iomega Network Attached Storage device on my Windows network. I am trying to use a clonezilla live USB flash drive to backup my netbook to my Iomega Network Attached Storage device. The clonezilla USB flash drive runs linux. I'm having trouble getting the Network Attached Storage unit to mount using the following command: mount -t cifs -o username="myUsername" //192.168.1.100/backup /home/partimg The response from linux is: [134.730738] CIFS VFS: cifs_mount failed w/return code = -6 retrying with upper case share name [134.788461] CIFS VFS: cifs_mount failed w/return code = -6 mount error(6): No such device or address Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) I also tried adding the following to my username: username="myUsername,domain=workgroup" but that did not change the error. I am able to ping the network attached storage unit from linux on my netbook. I also booted from a Slax Live USB Flash Drive and Slax auto-mounted my network attached storage unit via Samba. Unfortunately, I don't believe that I can run clonezilla from inside the Slax installation. Does anyone have any insight about what is wrong with my mount statement? Or is there something peculiar about Iomega drives which makes this impossible?

    Read the article

  • No signal on monitor after plug it to a linux box

    - by yaroot
    I use my old computer as an NAS, so I remove the monitor after I installed linux on it (disconnect vga cable). I use ssh to control the machine and it works fine. Until some day, after kernel/softare upgrade or messing up some configs, I cannot connect to it through ssh, then I have to plug the monitor back, but the monitor says "No input signal". So I have to restart the computer WITH the monitor connected, and the monitor's back! I think the computer/linux kernel doesn't detect the monitor plug-in event. So how can I start my linux box without a monitor, but when it goes wrong I can still plug my monitor (vga) back and use the console. Edit: just one pci-e video card, has dvi, vga, tv/out (s-video) Edit2: Xorg is not running. I just need the console (CTRL+ALT+F1). The problem is, if the machine booted without a monitor connected, it won't give me a pseudo terminal after I attach the vga cable while it's running. Clearly the monitor is not auto detected as usb device. I'm wondering how to let the monitor auto detected.

    Read the article

  • Arch linux ati graphics crash after grub install

    - by Jay
    Ok, so I've had an arch linux w/ gnome 3 installed for a while now. And a while ago I installed ubuntu as another partition, I think to fix an issue that cause arch to fail. So, it was all working fine, but then I went and reinstalled grub 1 on the arch partition; Ubuntu had overwritten it on the install. Then when I tried to boot into arch it booted, but the graphics wasn't working correctly: gdm wouldn't even show, and there were weird colors instead. So, I uninstalled xf86-video-ati and then installed xf86-video-vesa. That made gdm run in fallback mode and I was able to boot to gnome 3 fallback mode (or whatever it's called). But I can't seem to get the graphics working correctly.

    Read the article

  • Backing up default windows installation with dd from linux running on another partition - is this fe

    - by Marek
    I am preparing to reinstall my system. I am thinking about creating a multi boot with a linux distro+Windows 7 to choose from when starting up. I would love to be able to skip all the hassle of reinstalling Windows and all programs when it starts becoming too slow in the future, thus I would like to mirror my fresh Windows system partition with some programs preinstalled. I am thinking about installing Ubuntu, making a partition for windows, installing windows with the basic environment (Visual Studio, Office, etc.) then booting into Linux and making an image of the windows partition with dd. I am not familiar with linux at all so I am a little afraid something may go wrong along the way. Is it possible to do it this way? Will I be able to partition my existing disk for multi boot easily after I install Ubuntu? Will I be able to recover the Windows partition easily using dd when I will need to re-create a fresh windows partition in the future? What other (better) approach can you recommend to achieve the goal of easy disk mirroring (for free)?

    Read the article

  • HALEVT troubleshooting: VFAT usb storage device gets mounted with root:root user:group

    - by Nova deViator
    Hi, i'm banging my head for number of days around this problem. using Halevt for automounting, everything mostly works, but the only thing is that Halevt mounts external USB storage devices as root. So, as user i cannot write to files on them. Halevt gets run as halevt user on boot through /etc/init.d script. This is Ubuntu Lucid with Awesome WM. No GDM. Running halevt as user seem to not work (halevt runs but doesn't respond on Insert) I know HAL is deprecated and removed and i should probably write my own UDEV rules, but until then it seems there must a be simple hack that enables mounting VFAT/NTFS devices with specific uid/gid. this question/answer helps a lot, but not specifically to the above.

    Read the article

  • Access Existing Linux Installation from Windows Bootloader - Linux Installed and Then Windows 7

    - by nicorellius
    My hard drive is failing. I installed a new drive, and the installed Ubuntu 12.04 to try to rescue data. Realized that I wanted to install Windows and just access drives without transferring data (there are loads of it). I then installed Windows 7. Now my drive only boots to Windows 7. How do I access Linux and make Windows boot-loader load Linux? I originally thought I would just not use the Ubuntu installation but now I think I want it to be a dual boot system. What are good boot-loaders to install for this kind of dual boot situation? Can I accomplish this with BCDEdit? If I would have done this the other way (Windows first, then Linux) everything would be fine, but I didn't and now I'm trying to fix this. The problem I have is that I don't really know how to boot into Linux to retrieve any files I need. I guess using the disc would work, but I'm not sure how to go about this.

    Read the article

  • Avoid "privacy pitfalls" in Windows and Linux?

    - by Somebody still uses you MS-DOS
    I have a Windows and a Linux machine. In Windows, everytime I visit a site, a lot of cache/history files are created on my machine. I setup my Firefox to don't save anything. ...but Windows saves a lot of "temp" files, some strange files I opened in registry (like video names). Each video I open in VLC is shown in "Last shown videos". In windows, all files opened can be found at "Recent opened files" as well. A lot of these privacy configurations can be tweaked (VLC and "Recent opened files" in Windows) - it's a PITA doing it individually, but it's possible - but there isn't a guide to these "internal" privacy traces that are left on Windows installation. In Linux, I just know there are these problems in app level (like VLC). My question is: is there a complete guide to avoid undesirable traces of what I did/watch/used in my Windows machine? (Delete everytime the PC is restarted, or even avoiding recording these info at all) Is there a website with configuration guides to different types of software? I would like to know about Linux privacy pitfalls as well.

    Read the article

  • Is my OCZ SSD aligned correctly? (Linux)

    - by Barney Gumble
    I have an OCZ Agility 2 SSD with 40 GB of space. I use it as a system drive in Debian Linux (Squeeze) and in my opinion it's really fast. But I've read a lot on aligning partitions and file systems... And I'm not sure if I succeeded in aligning the partitions correctly. Maybe the SSD could be even faster?? ;-) I use ext4 and here is the output of fdisk -cul: Disk /dev/sda: 40.0 GB, 40018599936 bytes 255 heads, 63 sectors/track, 4865 cylinders, total 78161328 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: [...] Device Boot Start End Blocks Id System /dev/sda1 * 2048 73242623 36620288 83 Linux /dev/sda2 73244670 78159871 2457601 5 Extended /dev/sda5 73244672 78159871 2457600 82 Linux swap / Solaris My partitions were created just by the Debian Squeeze setup assistant. So I didn't care about the details of partitioning. But now I think maybe the installer didn't align it correctly? Actually, 2048 looks good to me (better than odd values like 63 or something like that) but I've no idea... ;-) Help plz! According to some "SSD Alignment Calculator" I found on the web, the OCZ SSDs have a NAND Erase Block Size of 512kB and their NAND Page Size is 4kB. 2048 is divisible by 4 and 512. So are the partitions aligned correctly?

    Read the article

  • How to use SSH Public Key with PuTTY to connect to a Linux machine

    - by ysap
    I am trying to set a public SSH key connection from a Windows 7 machine to a Red-Hat Linux machine. The ultimate purpose is to use pscp (PuTTY's version of scp) from the command terminal w/o the need to type password repetitively. Following PuTTY's documentation and other online sources, I used PuTTYgen to generate a key pair. I then copied the generated public key to a ~/.ssh/authorized_keys file on the Linux machine (as far as I can tell, it runs OpenSSH server). To check the connection, I run PuTTY and set the username and private key file in the appropriate places in its GUI. However, when trying to connect using PuTTY's SSH, the connection uses the preset username, but I get an error message of "Server refused our key" and a prompt for the password. I then tried to copy-paste the public key text from PuTTYgen's GUI to the authorized_keys file, but it did not work either. How should I set up a public key connection form Win 7 to Linux? How do I use this with pscp (rather than PuTTY's ssh)?

    Read the article

  • Partitioning & Linux

    - by Zac
    Every tutorial on Linux-based partitioning schemes (or, just partitioning in general) will tell you that a PC can have either 4 primary partitions, or 3 primaries and 1 extended. They will all also tell you that Linux (in my case, Ubuntu) can be installed on either. It's also come to my attention that it is not too atypical for FHS directories, such as usr/, tmp/, etc/, home/ or var/ to be mounted separately on other partitions. Several questions I am unable to find the answers to, purely for my own edification: (1) By "PC", are we really talking about common PC disk types, like IDE or SATA? I guess I'm wondering why PC uses are limited to 4 primaries or 3 primaries + 1 extended (2) I'm choking on some basic OS concepts: it is said that a partition can be mounted by a file system or an OS. So I assume this means I can somehow instruct Ubuntu to mount to 1 partition, and then any part of, say, ReiserFS, to be mounted to another partition? How? (3)(a) What about creating swap partitions? Is there too much of a good thing with swap partitioning? If I have 4GB RAM over 320GB disk, what should my swap partition size be, and why? (3)(b) Are swap files the only way to create swap partitions? Wouldn't a Linux partitioning utility allow me to define a partition as being for virtual memory only? (4) Why are partitions limited to being "mounted" by just OSes and file systems? Why couldn't I write a program to take up its own, say, 512 MB partition, and then have it invoked or uses by an OS installed on another partition? Thanks for shedding any light here... not critical that I know this stuff, but it's got me thinking incessantly. And when I think incessantly, I...can't......sleep....

    Read the article

  • Faking a Linux environment without chroot

    - by Pascal
    For a university project I want to test a C++11 program on a 32-core machine. Unfortunately the machine has Ubuntu 12.04 with GCC 4.6 installed (we need GCC 4.7 because of some C++11 threading features). In such an environment I would normally run a chroot with a custom linux (say a debootstrap with Ubuntu 12.10). Since we don't get root access on the machine we can't use chroot. So far I have prepared a run-time environment using debootstrap for our code, I compiled it in the debootstrap environemnt. Then copied it onto the server (using rsync). In order to run our C++ code I set the LD_LIBRARY_PATH to export LD_LIBRARY_PATH=~/debootstrap/usr/lib/:~/debootstrap/lib64/:~/debootstrap/usr/lib/x86_64-linux-gnu/:~/debootstrap/lib/x86_64-linux-gnu/:$LD_LIBRARY_PATH and so far our code seems to run. I'm however stuck with our python code. It doesn't seem to be sufficient to set the paths manually. export PYTHONPATH=~/debootstrap/usr/lib/python2.7/dist-packages:~/debootstrap/usr/lib/python2.7:~/debootstrap/usr/lib/python2.7/plat-linux2:~/debootstrap/usr/lib/python2.7/lib-tk:~/debootstrap/usr/lib/python2.7/lib-dynload:~/debootstrap/usr/local/lib/python2.7/dist-packages:~/debootstrap/usr/lib/pymodules/python2.7:~/debootstrap/usr/lib/python2.7/dist-packages/PIL:~/debootstrap/usr/lib/python2.7/dist-packages/gtk-2.0:~/debootstrap/usr/lib/python2.7 Executing our script results in ImportError: No module named _path Is there an easier way to accomplish a "fake"-chroot than just overriding and creating environment variables? Note I need python since we created a custom C++-Python module in order to run our tests. Maybe I should create two questions from this.

    Read the article

  • Replace Linux Boot-Drive | ext3 to btrfs

    - by bardiir
    I've got a headless server running Debian Linux currently. Linux vault 3.2.0-3-686-pae #1 SMP Mon Jul 23 03:50:34 UTC 2012 i686 GNU/Linux The root filesystem is located on an ext3 partition on the main harddrive. My data is located on multiple harddrives that are bundled to a storage pool running with btrfs. UUID=072a7fce-bfea-46fa-923f-4fb0827ae428 / ext3 errors=remount-ro 0 1 UUID=b50965f1-a2e1-443f-876f-578b5f93cbf1 none swap sw 0 0 UUID=881e3ad9-31c4-4296-ae60-eae6c98ea45f none swap sw 0 0 UUID=30d8ae34-e2f0-44b4-bbcc-22d761a128f6 /data btrfs defaults,compress,autodefrag 0 0 What I'd like to do is to place / into the btrfs pool too. The ideal solution would provide the flexibility to boot from any disk in the system alike, so if the main drive fails I'd just need to swap another one into the main slot and it would be bootable like the main one. My main problem is, everything I do needs to result in a bootable system that is open to ssh logins via network as this server is 100% headless so there is no possibility to boot it from a live cd or anything like that. So I'd like to be extra sure everything works out fine :) How would I best go about this? Can anybody hint me to guides or whip something up for these tasks? Anything I forgot to think about? Copy root-data into btrfs pool, adjust mountpoints,... Adjust GRUB to boot from btrfs pool UUID or the local device where GRUB is installed Sync GRUB to all harddrives so every drive is equally bootable (is this even possible without destroying the btrfs partitions on the drives or would I need to disconnect the drives, install grub on them and then connect them back with a slightly smaller partition?)

    Read the article

  • Wifi Works with Android and Windows 8 but not Linux and Win 7

    - by eramm
    Support has told me that our company wide wifi network is setup to support mobile phones only. However it doesn't make sense to me that they can identify a mobile device rather they have setup the Access Point to use a protocol that is only supported on Android and Windows phones. Because the Access Point supports Windows mobile this means that laptops running Windows 8 can also connect to the Access Point (proven). So it stands to reason that since Android is based on Linux there must be a way to connect using Linux as well. iwlist shows IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : 802.1x WIreshark seems to show that a connection is being made to a website to get a certificate and use a Domain Controller for authentication. Questions: 1) what protocol could they be using that is supported on Win Mobile and Android but not on Win 7 and Linux (Debian) ? 2) what tools can I use to help me discover what protocol i need to support ? I have used iwlist and wireshark but I was not able to glean to much useful information from them. I can post the results if needed. 3) is there an app i can use on my Android phone to help me understand what kind of network it is connecting to ? I can provide more information if you tell me how to get it. I just don't know what I am looking for.

    Read the article

  • seamless mode remote desktop connection from linux to windows

    - by mateusz.fiolka
    I am a programmer using Linux as my main OS, however sometimes I need to use windows (ie, office, ea). I'm running qemu with kvm to access the windows "machine". I would like to achieve something that is described here: https://help.ubuntu.com/community/SeamlessVirtualization (It means I would be able to run chosen applications on Windows and then display them locally on Linux as separate windows achieving good desktop integration). However seamless rdp is buggy and doesn't work on my machine (probably because I'm using a tiling window manager and a 64bit system). Are you aware of any other solution then rdp seamless mode? I would prefer to still use quemu because it uses cpu hardware virtualization, so different protocol/client combination would be preferable.

    Read the article

  • Ubuntu 10.10 - disaster - what other linux for beginner?

    - by A-ha
    Guys, I've tried to install ubuntu (desktop and notebook ed) on my laptop and unortunately I have to say that as despite the fact that installation process supposed to be easy I couldn't finish installation of this system - didn't detect my keyboard or rather lost my keyboard as soon as I tried to switch on/off pad on my laptop. After I've discovered that, I started all over again (this time without touching my laptop's pad during installation) and yes, eventually it get to the end of installation. Unfortunately, when I've tried to switch my pad (sometimes I just do not want to use a mouse) the whole system froze. So I had to restart it with the power button and this time I didn't touch pad at all, plugged in mouse and tried to rearrange taskbars according to my liking (all taskbars on the top side of the screen and auto-hide on) and I gave up. It is so unfinished that I just can't be bothered to use it. I would like to have one linux system on my machine so I started googling and most of the links are to either ubuntu (which I just do not want to touch for now) and suse or commercial versions of linux. I do not really mind paying for something (and having experience with ubuntu I'd rather pay and have something pro then get it free and discover that it's unusable). So could someone please provide short list of linux distros which would be appropriate for a beginner, and I don't mind paying for it, I just want it to be a professional product.

    Read the article

  • Todo/task manager for android and desktop linux

    - by RiaD
    I'm looking forward to Task/ToDo Manager. It should work under Android, Linux(or Web). If it's very cool, one of them is OK too, Android is preferable in this situation. Necessary features: Russian or English language Possibility to mark task as finished Interesting features: (I want as more, as possible, while it's OK, if some of them isn't avaliable) Nice and easy-to-use interface Possibility to choose finish time for task. After that it's showed as overdue. Possibility to choose start time for task. Before it task is inactive and maybe shown or hide Possibility to add nested tasks. Task marks completed when all sub-tasks are completed. Possibility to make dependencies. If A depends on B, and B isn't finished yet, A is inactive as in third feature. Possibility to create task in a moment without fill-all-this-forms Syncronization between version(Android to linux or Android to web) Notification (on Android only) Features, that I'm not interested in: Creating more than one todo list sharing ToDo's I've seen couple of managers. Best I've seen now is Task Coach for Linux, but I don't very like its interface, and there is no version for Android.

    Read the article

  • Installing Oracle11gr2 on redhat linux

    - by KItis
    I have basic question about installing applications on linux operating system. i am going to express my issue considering oracle db installation as a example. when installing oracle database , i created a user group called dba and and user in this group called ora112. so this users is allowed to install database. so my question is if ora112 uses umaks is set to 077, then no other uses will be able to configure oracle database. why do we need to follow this practice. is it a accepted procedure in application installation on Linux. please share your experience with me. thanks in advance for looking into this issue say i install java application on this way. then no other application which belongs to different user account won't be able use java running on this computer because of this access restriction.

    Read the article

  • Encrypted Windows 7 & Linux Advice Wanted

    - by Miles
    I would like to set up my laptop to dual boot Arch Linux and Windows 7 with file sharing and encryption. Just wanted some advice on going about this because I have not dealt with encryption nor file sharing. I have two 500GB hard drives, and this is my plan: Install Windows 7 across both hard drives Use a live CD to wipe out Windows boot loader and replace with Grub Legacy Use live CD to wipe out second hard drive and re-size the Windows partition located on first hard drive Install Arch Linux along side with Windows 7 on first hard drive, all remaining space goes to home folder as ext2 Install truecrypt and ext2fsd Concerns: Is this the most efficient way to share files between both OSes? Or should I just be using NTFS to store all my data? How would the file permissions work when sharing files between Windows and Linux? Is there a high likley hood of corruption, and what is the ease of backing up files from an encrypted disk? Anything I should look out for, conflict between Grub and Truecrypt? Thank you for any advice, and feel free to post any links you might find useful to me. I am trying to plan this out so I can minimize downtime as I do not want to spend more than a night on this, nor do I want to run into a major problem some time in the future.

    Read the article

  • Run application with other user

    - by user62367
    OS: Fedora 14 GUI: GNOME I need to run an application with another user then the "default" (normally used). Purpose: create a ".desktop" file on my desktop to run e.g.: Google Chrome with another user (NOT ROOT! - so beesu doesn't count.) There aren't any gksu, or kdesu packages in Fedora 14. Why? So i want to create a user with "adduser SOMEONE", and i want to run e.g.: Google Chrome with "SOMEONE" - then it will have minimum permissions, "more security". Thank you!

    Read the article

< Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >