Search Results

Search found 2143 results on 86 pages for 'vpn'.

Page 35/86 | < Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >

• IPsec VPN tunnel between Windows 2008 R2 and CISCO ASA?

  - by antur123

  I need to create a VPN IPsec tunnel between my Windows 2008 R2 server and a CISCO ASA device. I want my server to be both the end of the tunnel, and the server that connects to the other side (no need to connect a whole subnet, just the server would be fine). I found this article that seems to do the trick, but there are two differences: As mentioned above, the computer behind my end is the server itself. Can that be configured? (i.e. make the "computers in endpoint 1" IP address be the same than "local tunnel computer"). This article is for Juniper ScreenOS, not for CISCO ASA, though configurations look very similar. Would that configuration work for me?

  Read the article

• How to issue machine certificates to Android devices trying to connect to L2TP VPN (L2TP/IPsec with Certificate)?

  - by John Hendrix

  I are trying to find a way to connect Android devices to our VPN box running Windows Sever 2008. We manage to configure a couple Android devices to connect via PPTP. However, I would like to be able to connect using L2TP/IPSec with certificates instead. I've managed to export and apply the Enterprise CA's certificate on the Android phone, but are totally lost on how to issue a machine certificate to the Android phone. Is it even possible? If so, what are steps I should take to issue the machine certificate and enable the Android phone to connect via L2TP/IPsec with certificates? Thank you for your help!

  Read the article

• Trying to get a new user up on pfSense IPSec VPN; Config file import failed, now getting gateway err

  - by Chris

  Caveat: I am not a sysadmin, so please forgive the n00bness of the query. We have a new user and I'm trying to get them up on VPN. We use pfsense as an IPSEC endpoint. This person is using Shrewsoft for the client. I had created an entry in pfsense for them and then edited a previous user's config file. Shrewsoft didn't import the config file very well and I had to hand edit the information. Now we are getting gateway errors. One thing I've noticed is that there is a different between the values of the preshared key stored on the firewall and the psk stored in the config file. I assume it has something to do with a hash, but I've no idea if that's the case and whether that might be what's causing the problem. Any suggestions greatly appreciated! Tangentially, is there some software used to generate these config files?

  Read the article

• How to issue machine certificates to Android devices trying to connect to L2TP VPN (L2TP/IPsec with Certificate)?

  - by John Hendrix

  I are trying to find a way to connect Android devices to our VPN box running Windows Sever 2008. We manage to configure a couple Android devices to connect via PPTP. However, I would like to be able to connect using L2TP/IPSec with certificates instead. I've managed to export and apply the Enterprise CA's certificate on the Android phone, but are totally lost on how to issue a machine certificate to the Android phone. Is it even possible? If so, what are steps I should take to issue the machine certificate and enable the Android phone to connect via L2TP/IPsec with certificates? Thank you for your help!

  Read the article

• Combine VPN bandwith over two or more WAN connections? Load balancing?

  - by mistrfu

  Imagine you only have DSL with 5mbps Down and 2mbps Up. Is it possible to have 10 of these for example and combine them in a way that would increase the upstrean bandwidth to one server? In my head it works like this: intranet with one gateway/router router connected to multi wan load ballancer on each ballancer wan port router with vpn clinet set up, tunneling to a server ?some? software on the server in cloud joining all these connection into one interface again I would need this mostly for big uploads to a server, downlink to the office is not that important at all. Does it even make sense? I drew an image to clarify.

  Read the article

• How to iptables forward ppp0 to eth0

  - by HPHPHP2012

  need your help with get it routing properly. I've server with eth0 (external interface) and eth1(internal interface). eth1 is merged into the bridge br0 (172.16.1.1) I've installed the pptp and successfully configured it, so I got ppp0 interface (192.168.91.1) and got my VPN clients successfully connected. So I need your help to manage how to allow my VPN clients use internet connection (eth0). Below my configuration files, any help is much appreciated! Thank you! P.S. VPN clients are Windows Xp, Windows 7, Mac OS X Lion, Ubuntu 12.04, iOS 5.x cat /etc/pptpd.conf #local server ip address localip 192.168.91.1 #remote addresses remoteip 192.168.91.11-254,192.168.91.10 #translating ip addresses on this interface bcrelay br0 cat /etc/ppp/pptpd-options name pptpd refuse-pap refuse-chap refuse-mschap require-mschap-v2 require-mppe-128 ms-dns 8.8.8.8 ms-dns 8.8.4.4 nodefaultroute lock nobsdcomp auth logfile /var/log/pptpd.log cat /etc/nat-up #!/bin/sh SERVER_IP="aaa.aaa.aaa.aaa" LOCAL_IP="172.16.1.1" #eth0 with public ip PUBLIC="eth0" #br0 is internal bridge on eth1 interface INTERNAL="br0" #vpn VPN="ppp0" #local LOCAL="lo" iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT ACCEPT echo 1 > /proc/sys/net/ipv4/ip_forward iptables -A INPUT -i $LOCAL -j ACCEPT iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -m state --state NEW ! -i $PUBLIC -j ACCEPT ####CLEAR CONFIG#### #iptables -A FORWARD -i $PUBLIC -o $INTERNAL -m state --state ESTABLISHED,RELATED -j ACCEPT #iptables -A FORWARD -i $PUBLIC -o $INTERNAL -j ACCEPT #iptables -A FORWARD -i $INTERNAL -o $PUBLIC -j ACCEPT #iptables -t nat -A POSTROUTING -j MASQUERADE ####THIS PART IS NOT HANDLING IT#### iptables -A FORWARD -i $PUBLIC -o $VPN -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i $PUBLIC -o $VPN -j ACCEPT iptables -A FORWARD -s 192.168.91.0/24 -o $PUBLIC -j ACCEPT iptables -t nat -A POSTROUTING -s 192.168.91.0/24 -o $PUBLIC -j MASQUERADE # VPN - PPTPD iptables -A INPUT -p gre -s 0/0 -j ACCEPT iptables -A OUTPUT -p gre -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A INPUT -p tcp -s 0/0 --dport 1723 -j ACCEPT #SSH iptables -A INPUT -p tcp --dport 2222 -j ACCEPT iptables -A OUTPUT -p tcp --sport 2222 -j ACCEPT #BLACKLIST BLOCKDB="/etc/ip.blocked" IPS=$(grep -Ev "^#" $BLOCKDB) for i in $IPS do iptables -A INPUT -s $i -j DROP iptables -A OUTPUT -d $i -j DROP done

  Read the article

• Joining computers to domain when SBS is running in Datacenter

  - by ChrisMuench

  We are contemplating moving our SBS2k8 server to our datacenter. We would be setting up a VPN-VPN tunnel between everything to handle AD. Has anyone done this before? Any particular issues that anyone can remember? So the flow for AD would now become. SBS<-VPN---VPN<-Internal office network

  Read the article

• Set web browser (or other program) to use specific network

  - by Will

  my PC is connected to 3 different networks: 2 different LAN connections and a VPN connection. when i am connected to the vpn, i cannot browse to the LAN intranet as the DNS is all going through the vpn and it cannot see the domains on the LAN. Is there a way to set firefox/chrome/etc to use a specific connection, so that i don't have to disconnect from vpn to get to the other intranets?

  Read the article

• How to route 1 VPN through another on OS X?

  - by Eeep

  Hi everyone. Thanks a lot for your help! I've been tinkering with this for a while and have read many posts along with Googling for help, but my knowledge of TCP/IP is really weak... I have access to two different VPN servers. 1 Is set up in Network Settings and connects through PPP 2 Is set up through Tunnelblick and uses OpenVPN. I can connect to either tunnel #1 or tunnel #2, but not both one after the other... One of my major to-do's this year is study TCP/IP, but for now, would you be super-helpful and help me fix this really clearly? I have no experience with routing, DNS, gateways or any of that. If you tell me, "Set your gateway to XXX.XXX.XX.XXX" can you specify how I get that IP, off of what interface so I don't get messed up? I can figure out the terminal just fine if you let me know what to type, and I WILL read the man pages on everything you help me with. Thanks a million!

  Read the article

• OpenVPN, Server 12.04, connect to machines in home LAN behind VPN server

  - by inexion

  Problem: I've set up a working OpenVPN server, and am able to connect to it from anywhere using my mac laptop and tunnelblick. When I connect in, I'm assigned an IP address of 10.8.0.x, the server is 10.8.0.1, so I have no problems SSHing into it. Once SSHd in, I can even ping other machines (obviously) on my home network (192.168.1.x). Desired outcome: What I want, is, to connect to the VPN server, and instead of getting a 10.8.0.x address, I get a 192.168.1.x on my home network. I can't figure out how to talk to the OTHER machines on my home network WITHOUT being SSHd in to the VPN server. I'd like to just connect to my VPN server, then be a part of my home network. Attempted solutions: I've read that I need to set up routes, and/or enable IP forwarding. I enabled IP forwarding using sudo sysctl -w net.ipv4.ip_forward=1 and that doesn't seem to have done anything. I've also uncommented a line in the OpenVPN's server.conf file: # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. push "route 192.168.1.0 255.255.255.0" ;push "route 192.168.20.0 255.255.255.0" But still no luck, I still get a 10.8.0.x address... I've also read I may have to add routes to the router itself, but haven't tried that. Any help appreciated, thanks!

  Read the article

• Connecting Wii to router to Proxy Server via VPN to BBC iPlayer

  - by nkimber

  I live in the USA and want to be able to watch UK TV streamed over the web. The relevant services are geographically crippled. I can do this by using a VPN proxy server in the UK, connecting to the VPN service using a straight Windows VPN connection. However, this means I have to watch everything on my PC. The BBC iPlayer works on the Wii in the UK. So, I'd like to connect my Wii to a wireless router (LinkSys WRT54G2) and have that be automatically connected via VPN to my proxy service in the UK. If I can do this then I'd be able to stream UK TV direct to my TV via the Wii. I thought I could have one router act as my VPN connection, connected to a 2nd router that connects to my Cable internet access. But this bit isn't working, any thoughts?

  Read the article

• Bridging VirtualBox over OpenVPN TAP adapter on Windows

  - by Sean Edwards

  I'm trying to configure a virtual machine (VirtualBox guest running Backtrack 4) with a bridged adapter over a VPN connection. The VPN is is hosted by the cybersecurity club at my university, and connects to a sandboxed LAN designed for penetration testing against various servers that the club has built. My host (Windows 7 Ultimate) connects to the VPN fine and is assigned an IP through DHCP, but for some reason the VM can't do the same thing, and I'm not sure why. It's like OpenVPN is filtering out packets from the MAC address it doesn't recognize. I want the virtual machine to bridge over the VPN connection, because our IT office has very strict policies about what you can and can't do on the network. I want to be able to run active attacks (ARP spoofing, nmap, Nessus scans) in the sandbox environment without risking the traffic accidentally going over the university network and getting my internet access revoked. Bridging over the VPN connection and running all attacks from inside the VM would solve that problem. Any idea why the host can use this interface, but the VM can't?

  Read the article

• Bridging VirtualBox over OpenVPN TAC adapter on Windows

  - by Sean Edwards

  I'm trying to configure a virtual machine (VirtualBox guest running Backtrack 4) with a bridged adapter over a VPN connection. The VPN is is hosted by the cybersecurity club at my university, and connects to a sandboxed LAN designed for penetration testing against various servers that the club has built. My host (Windows 7 Ultimate) connects to the VPN fine and is assigned an IP through DHCP, but for some reason the VM can't do the same thing, and I'm not sure why. It's like OpenVPN is filtering out packets from the MAC address it doesn't recognize. I want the virtual machine to bridge over the VPN connection, because our IT office has very strict policies about what you can and can't do on the network. I want to be able to run active attacks (ARP spoofing, nmap, Nessus scans) in the sandbox environment without risking the traffic accidentally going over the university network and getting my internet access revoked. Bridging over the VPN connection and running all attacks from inside the VM would solve that problem. Any idea why the host can use this interface, but the VM can't?

  Read the article

• Other Ideas to troubleshoot Cisco IPSec VPN on OSX?

  - by Tawm

  We have one user running OSX Snow Leopard who is having issues staying connected to our VPN running off of an ASA5510. His connection can die even as he's actively pushing traffic across it or if he's been idle for a period of time. Other users on Snow Leopard, Lion, XP, Vista, 7 and various linux flavors are able to stay connected for 24hrs+ without issue We've deleted and remade the connection in System Preferences Networking, ran killall racoon (kills any lingering connections) Below are the logs from the user's system.log from a connect/disconnect cycle: Oct 10 21:22:25 username racoon[8192]: Connecting. Oct 10 21:22:25 username racoon[8192]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 1). Oct 10 21:22:25 username racoon[8192]: IKEv1 Phase1 AUTH: success. (Initiator, Aggressive-Mode Message 2). Oct 10 21:22:25 username racoon[8192]: IKE Packet: receive success. (Initiator, Aggressive-Mode message 2). Oct 10 21:22:25 username racoon[8192]: IKEv1 Phase1 Initiator: success. (Initiator, Aggressive-Mode). Oct 10 21:22:25 username racoon[8192]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 3). Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Mode-Config message). Oct 10 21:22:29 username racoon[8192]: IKEv1 XAUTH: success. (XAUTH Status is OK). Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Mode-Config message). Oct 10 21:22:29 username racoon[8192]: IKEv1 Config: retransmited. (Mode-Config retransmit). Oct 10 21:22:29 username racoon[8192]: IKE Packet: receive success. (MODE-Config). Oct 10 21:22:29 username configd[14]: event_callback: Address added. previous interface setting (name: en1, address: 192.168.0.100), current interface setting (name: utun0, family: 1001, address: 10.215.8.53, subnet: 255.0.0.0, destination: 10.215.8.53). Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1). Oct 10 21:22:29 username configd[14]: network configuration changed. Oct 10 21:22:29 username racoon[8192]: IKE Packet: receive success. (Initiator, Quick-Mode message 2). Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3). Oct 10 21:22:29 username racoon[8192]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode). Oct 10 21:22:29 username racoon[8192]: Connected. Oct 10 21:22:29 username configd[14]: SCNCController: Connected. Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1). Oct 10 21:22:29 username racoon[8192]: IKE Packet: receive success. (Initiator, Quick-Mode message 2). Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3). Oct 10 21:22:29 username racoon[8192]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode). Oct 10 21:22:47 username login[8200]: USER_PROCESS: 8200 ttys003 Oct 10 21:22:48 username GrowlHelperApp[160]: Periodic CFURLCache Insert stats (iters: 17240) - Tx time:0.001749, # of Inserts: 1, # of bytes written: 304, Did shrink: NO, Size of cache-file: 26624, Num of Failures: 0 Oct 10 21:25:24 username login[7367]: DEAD_PROCESS: 7367 ttys002 Oct 10 21:25:31 username login[7907]: DEAD_PROCESS: 7907 ttys001 Oct 10 21:27:32 username configd[14]: SCNCController: Disconnecting. (Connection was up for, 303 seconds). Oct 10 21:27:32 username racoon[8192]: IKE Packet: transmit success. (Information message). Oct 10 21:27:32 username racoon[8192]: IKEv1 Information-Notice: transmit success. (Delete IPSEC-SA). Oct 10 21:27:32 username racoon[8192]: IKE Packet: transmit success. (Information message). Oct 10 21:27:32 username racoon[8192]: IKEv1 Information-Notice: transmit success. (Delete IPSEC-SA). Oct 10 21:27:32 username racoon[8192]: IKE Packet: transmit success. (Information message). Oct 10 21:27:32 username racoon[8192]: IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA). Oct 10 21:27:32 username racoon[8192]: Disconnecting. (Connection was up for, 302.766105 seconds). Oct 10 21:27:32 username configd[14]: network configuration changed. Oct 10 21:27:34 username login[8200]: DEAD_PROCESS: 8200 ttys003

  Read the article

• Bridging VirtualBox over OpenVPN TAP adapter on Windows

  - by Sean Edwards

  I'm trying to configure a virtual machine (VirtualBox guest running Backtrack 4) with a bridged adapter over a VPN connection. The VPN is is hosted by the cybersecurity club at my university, and connects to a sandboxed LAN designed for penetration testing against various servers that the club has built. My host (Windows 7 Ultimate) connects to the VPN fine and is assigned an IP through DHCP, but for some reason the VM can't do the same thing, and I'm not sure why. It's like OpenVPN is filtering out packets from the MAC address it doesn't recognize. I want the virtual machine to bridge over the VPN connection, because our IT office has very strict policies about what you can and can't do on the network. I want to be able to run active attacks (ARP spoofing, nmap, Nessus scans) in the sandbox environment without risking the traffic accidentally going over the university network and getting my internet access revoked. Bridging over the VPN connection and running all attacks from inside the VM would solve that problem. Any idea why the host can use this interface, but the VM can't?

  Read the article

• Cannot Ping a server after configuring the Routing and Remote Access Services

  - by stacker

  After configuring the Routing and Remote Access Services to be a both VPN and NAT service, I cannot ping that server anymore from the external side. But when I configure it to be just a VPN server, or just a NAT server, I do able to ping it from the external side. My configuration is like: DC: 192.168.20.11 VPN and NUT: Nic 1: 192.168.20.1, NIC 2: 192.168.147.171 Client: 192.168.147.1 The mask is always: 255.255.255.0 I cannot understand why when configuring the VPN server to be a VPN and NAT, I cannot ping the server anymore.

  Read the article

• FreeBSD's VPN & Mac OS X IPSecuritas

  - by alexus

  I need to be able to VPN in to my FreeBSD server from my Mac using IPSecuritas. I was wondering if anyone ever done something, I'm reading VPN over IPsec but that mainly covers if you had 2 nodes with 2 public IP address. My endpoint in IPSecuritas configured with MODE_CFG enabled so it'll have the other node to query my address from it's coming from. SSH is out of question, this is not a VPN solution, people who'd end up using VPN wouldn't know what to do, so I need very simple VPN the one that you get to use almost anywhere, you have a client and you have server, client makes a connection to server and boom, you in...

  Read the article

• PPTP: Linux clients unreachable

  - by Bahman

  I have setup a PPTP server on a CentOS 6 box. Several clients (Windows and Linux) connect to this server. All clients use the same subnet. All clients (Win or Lin) can surf the Internet using the VPN successfully. Windows clients can ping any other Windows client (XP/Vista/7) connected to VPN. Linux clients (KVPNC) can ping any Windows client (XP/Vista/7) connected to VPN. So far so good. But there's this weird problem and I've been trying to figure it out with no luck: No client can ping (reach) a Linux client (successfully) connected to VPN. And yes, the firewall is completely disabled. I'd really appreciate any hint/idea. TIA, EDIT: The ultimate goal of this is to share services across the VPN, like accessing a HTTPD running on a Linux box from a Windows client.

  Read the article

• 4in6 tunneling (via OpenVPN?)

  - by Deshene

  I have a local network with internet access. But unfortunately IPv4 internet connection speed is limited to 1mbps, which is realy sad. Fortunately I have a native IPv6, and there is no connection speed limit over IPv6. So, in order to get a good internet connection I made a plan: connect to the VPN-service over IPv6, and pass all IPv4 traffic through IPv6 tunnel, or something like that, I think you get the idea. I suggested to use service like HideMyAss.com, but unfortunately they don't support IPv6. The question is: Is there any existing VPN service that will make my dreams come true, and is easy to use, which I could connect over PPTP or OpenVPN (I want to set up connection to VPN in my router settings). Edit: It seems like there are couple of VPN services that supports IPv6 (it's odd, but the biggest VPN services support only IPv4), and there is none providing 4in6 tunnels. So, I came to the following solution: rent a VPS with IPv6 address, and manually setup 4in6 tunnel. I'm not good at networking, never did things like that, and don't know where to start, and what should I do. The use case, as I undestand, should look like this: I connect from my home computer to the VPS via OpenVPN, and after that all my IPv4 traffic pass through IPv6 (server do the job). OpenVPN - because I want to configure VPN connection to server in my router (Asus RT-N16?). How can I achieve this?

  Read the article

• how to prevent other computers from seeing our network computers through vpn

  - by Disco

  We have a local office domain consisting of Windows 7 and XP machines that is running on Windows Server 2008 R2. We also have users that connect via VPN into our network. My concern is that when a remote user opens up a folder, the Network section on the left side of the folder shows the remote user all the computer names in our local network. I would like to go about renaming our computers in the local network with more descriptive computer names, but I do not want the users off-site to be able to see these computer names by simply opening up a folder. (Granted, they can already do this, but our current naming scheme does not link computer names to users.) I would like to change our computer names so we can determine which computer belongs to which user more easily IF it can be done securely. How can I ensure that our local computer names are not showing up in the Network folder for remote, VPN-connected users? My online searches have turned up results where people are advised to turn off Network Sharing and Discovery, but that seems to only ensure that the local machine doesn't see other computer names. I want to prevent OUR computer names from showing up on OTHER computers, and I can't go into the VPN-connected computers and turn off THEIR Network Discovery settings. I would think there is a group policy that would control this but I have not found one yet and I don't know how I would apply it to VPN-connected computers. Thanks! EDIT: That's true, a Group Policy wouldn't run on users only connecting via VPN, good point. What about a VPN/router policy, then?

  Read the article

• Cherrypy web application won't communicate outside localhost via VPN

  - by Geoffrey Shea

  I'm trying to run a Python2.7/Cherrypy web server on Win 7 which is connected to a VPN to establish a dedicate IP address. (If I run the exact same application on Win XP connected to the VPN it works fine.) On Win 7 I tried configuring it to use port 8080, 8005, or 80 with no improvements. I turned off Windows Firewall altogether to test and there was no improvement. If I run Apache on the Win 7 machine on port 80 it works fine so I'm pretty sure it's not the VPN service or router. If I go to WhatismyIP.com it shows that I have the IP address being provided by the VPN. Here is the Python code, but I suspect the problem is the network configuration: import cherrypy class HelloWorld: def index(self): return "Hello world!3" index.exposed = True cherrypy.root = HelloWorld() cherrypy.config.update({"global":{ "server.environment": "production", "server.socketPort": 8005 } }) cherrypy.server.start() This will return a web page if I go to localhost:8005, but not if I go to the VPN IP address:8005 from another machine. As I said, if I run Apache on the Win 7 machine on port 80 I can see it at localhost:80 AND at the VPN IP address:80 from another machine. Thanks for any light you can shed! Geoffrey

  Read the article

• Mounting with Nautilus works but fstab gives "Host is down" error?

  - by Annan

  I'm connecting to my university's VPN so I can connect to the network drive. The VPN seems to be working fine and I can connect to the drive by typing the address into Nautilus and entering my login details: smb://139.___.___.140/home However, this fstab entry doesn't work: //139.___.___.140/home /media/___ cifs domain=CS,username==___,password=___,uid=sai,gid=sai 0 0 Nor does manually mounting it: sudo mount -t cifs //139.___.___.140/home /media/___ -o domain=CS,username=___,password=___,uid=sai,gid=sai,user The only error it gives is: mount error(112): Host is down Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) It's obvious the host isn't down since I can view the share from Nautilus. Why is Nautilus mounting it fine but not the normal mount command? What could cause this error?

  Read the article

• What is the best way to bypass China firewall to allow SSH deploy@**.com

  - by Lap

  I am trying to bypass the china firewall and allow SSH deploy@**.com at the command console. This is because I need to test the games I wrote on apps.facebook.com/**. I tried VPN (both pptp and openvpn), but they aren't that great as connection speed slows down significantly. Since I am deploying the game in another site, my browser needs to download the game, which is super slow. What are ways of bypassing the firewall other than getting a VPN? I was thinking maybe have a computer outside China and using teamviewer to access...

  Read the article

• Ubuntu 12.10 Network Connection menu GUI doesnt work properly

  - by wax

  Many a times I have seen When I click on network connection(besides volume icon), I am unable to select any options. When I hover over VPN connections, the list shows nothing. I have added many VPNs. Network menu becomes non responsive to any clicks. This is annoying because I am not able to connect to any of the VPN connections. "Enable Wireless", "Edit Connections" or any other option doesnt work at all. Restarting ubuntu fixes this issue. But problem starts randomly again and restarting my laptop is the only way to fix it. Is this a known bug? Any ways to fix this prob?

  Read the article

• CSS not loading when site is viewed via Windows VPN

  - by Dreamling

  Internal site has recently been redesigned, but IE8 does not seem to be loading the new css rules only when viewed via VPN. I really have no clue what to look for. I can't reproduce the problem, but it's apparently affecting client for the last month. I've suggested: Reloading IE8 Checking Internet Permissions Flushing the cache I'm not really certain what direction to search for the answer. Is it likely to be a server permissions issue? a VPN connection issue? a rare ie8 CSS bug?

  Read the article

< Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >