Search Results

Search found 2177 results on 88 pages for 'wifi teethering'.

Page 35/88 | < Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >

• How do I send traffic from my Mac's wifi to my VPN client?

  - by Heath Borders

  I need to connect my Android to a Juniper VPN. Unfortunately, Juniper doesn't support Android on our VPN version. We've already put in a feature request for it, but we have no idea how long it will take to be complete. Right now, I connect to the Juniper VPN with a Juniper Mac OSX VPN client that uses Java to install kernel extensions to start and stop the VPN. Thus, I can't use the Network panel in System Preferences to create a VPN device, which means it won't show up in the 'Sharing' panel's Internet Sharing Share your connection from: menu, as suggested here. I used newproc.d to see what /usr/libexec/InternetSharing did when it ran, and it runs the following processes: 2013 Nov 1 00:26:54 5565 <1> 64b /usr/libexec/launchdadd 2013 Nov 1 00:26:55 5566 <1> 64b /usr/libexec/InternetSharing 2013 Nov 1 00:26:56 5568 <5566> 64b natpmpd -d -y bridge100 en0 2013 Nov 1 00:26:56 5569 <1> 64b /usr/libexec/pfd -d 2013 Nov 1 00:26:56 5567 <5566> 64b bootpd -d -P My Juniper VPN client creates the following devices (output of ifconfig): jnc0: flags=841<UP,RUNNING,SIMPLEX> mtu 1400 inet 10.61.9.61 netmask 0xffffffff open (pid 920) jnc1: flags=841<UP,RUNNING,SIMPLEX> mtu 1450 closed So, it seems like I should just be able to do this and have everything work: sudo killall -9 natpmpd sudo /usr/libexec/natpmpd -y bridge100 jnc0 My android connected fine and could hit public internet sites, but it couldn't hit private VPN sites. I assume this is because I need to change the routes that /usr/libexec/InternetSharing sets up. This is the output from sudo pfctl -s all before starting Internet Sharing: No ALTQ support in kernel ALTQ related functions disabled TRANSLATION RULES: nat-anchor "com.apple/*" all rdr-anchor "com.apple/*" all FILTER RULES: scrub-anchor "com.apple/*" all fragment reassemble anchor "com.apple/*" all DUMMYNET RULES: dummynet-anchor "com.apple/*" all INFO: Status: Disabled for 0 days 00:11:02 Debug: Urgent State Table Total Rate current entries 0 searches 22875 34.6/s inserts 1558 2.4/s removals 1558 2.4/s Counters match 2005 3.0/s bad-offset 0 0.0/s fragment 0 0.0/s short 0 0.0/s normalize 0 0.0/s memory 0 0.0/s bad-timestamp 0 0.0/s congestion 0 0.0/s ip-option 12 0.0/s proto-cksum 0 0.0/s state-mismatch 1 0.0/s state-insert 0 0.0/s state-limit 0 0.0/s src-limit 0 0.0/s synproxy 0 0.0/s dummynet 0 0.0/s TIMEOUTS: tcp.first 120s tcp.opening 30s tcp.established 86400s tcp.closing 900s tcp.finwait 45s tcp.closed 90s tcp.tsdiff 60s udp.first 60s udp.single 30s udp.multiple 120s icmp.first 20s icmp.error 10s grev1.first 120s grev1.initiating 30s grev1.estblished 1800s esp.first 120s esp.estblished 900s other.first 60s other.single 30s other.multiple 120s frag 30s interval 10s adaptive.start 6000 states adaptive.end 12000 states src.track 0s LIMITS: states hard limit 10000 app-states hard limit 10000 src-nodes hard limit 10000 frags hard limit 5000 tables hard limit 1000 table-entries hard limit 200000 OS FINGERPRINTS: 696 fingerprints loaded This is the output from sudo pfctl -s all after starting Internet Sharing: No ALTQ support in kernel ALTQ related functions disabled TRANSLATION RULES: nat-anchor "com.apple/*" all nat-anchor "com.apple.internet-sharing" all rdr-anchor "com.apple/*" all rdr-anchor "com.apple.internet-sharing" all FILTER RULES: scrub-anchor "com.apple/*" all fragment reassemble scrub-anchor "com.apple.internet-sharing" all fragment reassemble anchor "com.apple/*" all anchor "com.apple.internet-sharing" all DUMMYNET RULES: dummynet-anchor "com.apple/*" all STATES: ALL tcp 10.0.1.32:50593 -> 74.125.225.113:443 SYN_SENT:CLOSED ALL udp 10.0.1.32:61534 -> 10.0.1.1:53 SINGLE:NO_TRAFFIC ALL udp 10.0.1.32:55433 -> 10.0.1.1:53 SINGLE:NO_TRAFFIC ALL udp 10.0.1.32:64041 -> 10.0.1.1:53 SINGLE:NO_TRAFFIC ALL tcp 10.0.1.32:50619 -> 74.125.225.131:443 SYN_SENT:CLOSED INFO: Status: Enabled for 0 days 00:00:01 Debug: Urgent State Table Total Rate current entries 5 searches 22886 22886.0/s inserts 1563 1563.0/s removals 1558 1558.0/s Counters match 2010 2010.0/s bad-offset 0 0.0/s fragment 0 0.0/s short 0 0.0/s normalize 0 0.0/s memory 0 0.0/s bad-timestamp 0 0.0/s congestion 0 0.0/s ip-option 12 12.0/s proto-cksum 0 0.0/s state-mismatch 1 1.0/s state-insert 0 0.0/s state-limit 0 0.0/s src-limit 0 0.0/s synproxy 0 0.0/s dummynet 0 0.0/s TIMEOUTS: tcp.first 120s tcp.opening 30s tcp.established 86400s tcp.closing 900s tcp.finwait 45s tcp.closed 90s tcp.tsdiff 60s udp.first 60s udp.single 30s udp.multiple 120s icmp.first 20s icmp.error 10s grev1.first 120s grev1.initiating 30s grev1.estblished 1800s esp.first 120s esp.estblished 900s other.first 60s other.single 30s other.multiple 120s frag 30s interval 10s adaptive.start 6000 states adaptive.end 12000 states src.track 0s LIMITS: states hard limit 10000 app-states hard limit 10000 src-nodes hard limit 10000 frags hard limit 5000 tables hard limit 1000 table-entries hard limit 200000 TABLES: OS FINGERPRINTS: 696 fingerprints loaded It looks like I need to change the pf settings that /usr/libexec/InternetSharing set up, but I have no idea how to do that.

  Read the article

• Two Router issue, cannot reach internet

  - by DeBuGGeR

  I have on ADSL router and one CISCO Wifi Router. The ADSL Router is working fine on its own. I am connecting the lan port of the ADSL Router to the internet(RJ45) port of my Cisco wifi router. But I cannot access the internet from the Cisco router, neither through wifi nor through ethernet connection. The IP of ADSL router is 192.168.1.1 and the ip of my Wifi router is 192.168.1.100. Should I connect to the LAN port of my Wifi router rather than using the ethernet port(Marked as Internet)?

  Read the article

• How to make a streaming server to stream media from computer to mobile phone in wifi?

  - by zkz

  Usually we have many HD movies in our computer, but we want to see them by our mobile phone. This requirement produces some questions: 1?the HD videos are too big to transfer to phone timely and it it hard to play on phone smoothly, so we have to transform the videos smaller and fit the screen of phone. 2?the coded format of the videos are varied, but limited types are supported by mobile phone, so we should transform the coded format to those supported by mobile phone. I've leaned the streaming media fit this problem, what I want is: 1?are there any good opensource projects fit this(ffmpeg?live555? darwin?)? 2?are they quick enough to transform coded format and transfer to mobile phone to play with no delay? Thank u very much!

  Read the article

• Windows 7 Natively on Mac OS X Bootcamp, Airport Wifi Unable To Connect....

  - by Goober

  Hello! I am using a brand new MacBook Pro. I am running a copy of Windows 7 natively via bootcamp (No use of Virtual Machine Software at all). However the only way I can get Windows to connect to the internet is via ethernet, as opposed to the Macs Airport card picking up the wireless. It just refuses to connect, and gives me a limited access status. Any ideas!? I've run Windows XP natively via bootcamp and I had a few issues with the network constantly dropping out, however I blamed that on the drivers and the general shiteness of XP.... Help greatly appreciated.

  Read the article

• Creating Shared Wifi Connection on Windows 7 WITHOUT wep/wpa security?

  - by Duncan

  Ok, for some reason I just can't figure this out on Windows 7. Never had an issue with it on Windows XP, never tried in Vista. I realize that I need to create an Ad-Hoc setup which I can do. However I can't get it to share the wireless signal on my laptop. Even if I go into the adapter settings. I need (well, want) to connect my old Psion netBook to my home network and due to the wireless card, I can't have any form of security. Thanks in advance!

  Read the article

• Can't connect to Apple Time Capsule in home network using Home Plugs from Win 7 Machine

  - by Eugene

  I have the following home network setup with subnet 255.255.255.0 but recently moved my time capsule to a different location when I added a third Home Plug and can no longer ping or map a network drive to it from the Windows 7 Machine. However using Airport Utility on the Windows 7 machine I can manually configure the Time Capsule. Using a Macbook on WIFI Network 1 or 2 - I can backup to the time capsule, so its accessible via both the router wifi network and the time capsule wifi network. The Time Capsule is set to BRIDGE function - ie no NAT or DHCP server enabled. Any bright sparks out there that can help diagnose the problem? Router (192.168.1.254) WIFI Network 1 | | |---- Home Plug one |---- Home Plug Two | |---- Computer A Windows 7 (192.168.1.160) | |---- Printer (192.168.1.69) |---- Home Plug Three | |---- Apple Time Capsule (192.168.1.150) WIFI Network 2 |---- Smart TV (192.168.1.70) | |---- Apple TV (192.168.1.4)

  Read the article

• is it good to have or difference between ADSL Modem+WiFi Router and Separate ADSL Modem & Wi-Fi Router?

  - by vikas devde

  I have ADSL2 Modem which I got from my service provider, now I want to setup wireless(Wi-Fi) in my home. I went to shop, where I came to know that there are routers which come up with modem also but they are priced lil higher than the only wi-fi routers. Now it is obvious that I should go for only wi-fi one, as I already have modem. My question is, is there any difference between ADSL+router and only router? I think if I use ADSL+router, the speed will increase lilbit, as modem does modulate and demodulate signals, and router also generates wireless signal, that is time to take conversions is doubled, and if I use ADSL+modem, it will directly convert the signals to wireless, and time will be saved, so the overall speed will increase lilbit. This is what my concept is(Which might be wrong). What do you guys would suggest me? should I take my current modem away and buy an ADSL+router or I should keep my modem and buy only wi-fi one. Please tell me the difference and suggest me which one I should go with, and also suggest me which company router I should go for.

  Read the article

• Why can I view my site over a 3G connection but not through my wifi?

  - by Jonathan

  So, I am sitting in my office with four computers on the same network and internet connection. Two of the computers can visit this particular website. Two of the computer get a message "Google Chrome could not find". I have tried FF and IE also with the same problem. I can view the site 90% of the time on two of the working computers although the site seems slow and sometimes I also get the same errors as the other two computers. I have flushed the DNS, reset the router, tested the site on other peoples computers with success. Is this likely to be a site issue, an ISP issue, a hosting issue? Any advice is greatly appreciated. Here is the ping from the working machine: C:\Users\Jon>ping www.balihaicruises.com Pinging www.balihaicruises.com [208.113.173.102] with 32 bytes of data: Reply from 208.113.173.102: bytes=32 time=331ms TTL=47 Reply from 208.113.173.102: bytes=32 time=327ms TTL=47 Reply from 208.113.173.102: bytes=32 time=326ms TTL=47 Reply from 208.113.173.102: bytes=32 time=329ms TTL=47 Ping statistics for 208.113.173.102: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 326ms, Maximum = 331ms, Average = 328ms Traceroute: Tracing route to www.balihaicruises.com [208.113.173.102] over a maximum of 30 hops: 1 1 ms 17 ms 3 ms 192.168.1.1 2 42 ms 37 ms 36 ms 180.254.224.1 3 39 ms 47 ms 40 ms 180.252.1.69 4 36 ms 616 ms 57 ms 61.94.115.221 5 84 ms 76 ms 80 ms 180.240.191.98 6 73 ms 80 ms 72 ms 180.240.191.97 7 157 ms 143 ms 116 ms 180.240.190.82 8 115 ms 113 ms 120 ms ae1-123.hkg11.ip4.tinet.net [183.182.80.93] 9 331 ms 332 ms 335 ms xe-3-2-1.was14.ip4.tinet.net [89.149.184.30] 10 327 ms 330 ms 331 ms internap-gw.ip4.tinet.net [77.67.69.254] 11 437 ms 415 ms 350 ms border10.pc2-bbnet2.wdc002.pnap.net [216.52.127.73] 12 322 ms 823 ms 398 ms dreamhost-2.border10.wdc002.pnap.net [216.52.125.74] 13 328 ms 336 ms 326 ms ip-208-113-156-4.dreamhost.com [208.113.156.4] 14 326 ms 328 ms 336 ms ip-208-113-156-14.dreamhost.com [208.113.156.14] 15 327 ms 331 ms 333 ms apache2-udder.crisp.dreamhost.com [208.113.173.102] And then for the machine that doesn't work: C:\Users\Microsoft>ping www.balihaicruises.com Ping request could not find host www.balihaicruises.com. Please check the name and try again. C:\Users\Microsoft>tracert www.balihaicruises.com Unable to resolve target system name www.balihaicruises.com.

  Read the article

• Why is my Wifi connection slower than ethernet even though bandwidth should saturated?

  - by supercheetah

  I'm wondering why it is that my wireless connection is slower than my wired connection for things going to the outside world (so, not files being transferred within the network), which is should be faster than the outside connection, which, I would think, would mean that downloading something like an ISO or other large file from the Internet should be the same either way since that should saturate the connection anyway. Does it have something to do with the encryption (WPA)? Could it have something to do with MTU since the MTU for ethernet can be in the range of 1500 to 9000 bytes, and 2304 bytes for 802.11? Do wireless packets have to be buffered, whereas this wouldn't be an issue with ethernet? What's the math behind the difference?

  Read the article

• Could not connect to wireless unitl reboot (nl80211)

  - by user107410

  I'm using Samsung NP900X3C. I have problem with occasionally connecting to WIFI, with Ubuntu 12.10. Sometimes my computer could not connect to WIFI "blab", neither after reboot computer. Only solution is to restart WIFI hotspot. It's public WIFI, used by many users, that don't have that problem. My /var/log/syslog: Nov 12 10:09:39 k15 wpa_supplicant[1308]: wlan0: SME: Trying to authenticate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:09:39 k15 kernel: [ 8.908610] wlan0: authenticate with 64:70:02:89:7c:d7 Nov 12 10:09:39 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: scanning -> authenticating Nov 12 10:09:39 k15 kernel: [ 8.915032] wlan0: send auth to 64:70:02:89:7c:d7 (try 1/3) Nov 12 10:09:39 k15 wpa_supplicant[1308]: wlan0: Trying to associate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:09:39 k15 kernel: [ 8.916753] wlan0: authenticated Nov 12 10:09:39 k15 kernel: [ 8.916839] wlan0: waiting for beacon from 64:70:02:89:7c:d7 Nov 12 10:09:39 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: authenticating -> associating Nov 12 10:09:39 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: associating -> disconnected Nov 12 10:09:39 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: disconnected -> scanning Nov 12 10:09:42 k15 wpa_supplicant[1308]: wlan0: SME: Trying to authenticate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:09:42 k15 kernel: [ 12.386212] wlan0: authenticate with 64:70:02:89:7c:d7 Nov 12 10:09:42 k15 wpa_supplicant[1308]: wlan0: Trying to associate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:09:42 k15 kernel: [ 12.389114] wlan0: send auth to 64:70:02:89:7c:d7 (try 1/3) Nov 12 10:09:42 k15 kernel: [ 12.391021] wlan0: authenticated Nov 12 10:09:42 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: scanning -> authenticating Nov 12 10:09:42 k15 kernel: [ 12.391332] wlan0: waiting for beacon from 64:70:02:89:7c:d7 Nov 12 10:09:42 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: authenticating -> associating Nov 12 10:09:43 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: associating -> disconnected Nov 12 10:09:43 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: disconnected -> scanning Nov 12 10:09:46 k15 wpa_supplicant[1308]: wlan0: SME: Trying to authenticate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) and after restart WiFi, I could connect: Nov 12 10:11:51 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: inactive -> scanning Nov 12 10:11:55 k15 wpa_supplicant[1308]: wlan0: SME: Trying to authenticate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:11:55 k15 kernel: [ 144.445154] wlan0: authenticate with 64:70:02:89:7c:d7 Nov 12 10:11:55 k15 kernel: [ 144.453994] wlan0: send auth to 64:70:02:89:7c:d7 (try 1/3) Nov 12 10:11:55 k15 wpa_supplicant[1308]: wlan0: Trying to associate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:11:55 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: scanning -> authenticating Nov 12 10:11:55 k15 kernel: [ 144.455860] wlan0: authenticated Nov 12 10:11:55 k15 kernel: [ 144.458681] wlan0: associate with 64:70:02:89:7c:d7 (try 1/3) Nov 12 10:11:55 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: authenticating -> associating Nov 12 10:11:55 k15 kernel: [ 144.462799] wlan0: RX AssocResp from 64:70:02:89:7c:d7 (capab=0x431 status=0 aid=9) Nov 12 10:11:55 k15 kernel: [ 144.486368] wlan0: associated Nov 12 10:11:55 k15 wpa_supplicant[1308]: wlan0: Associated with 64:70:02:89:7c:d7 Nov 12 10:11:55 k15 kernel: [ 144.487435] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Nov 12 10:11:55 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: associating -> associated Nov 12 10:11:55 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake This problem is appearing regulary. My WiFi device control is nl80211. Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): using nl80211 for WiFi device control Nov 12 10:09:32 k15 NetworkManager[1004]: <warn> (wlan0): driver supports Access Point (AP) mode Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): new 802.11 WiFi device (driver: 'iwlwifi' ifindex: 3) Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/0 Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): now managed Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): bringing up device.

  Read the article

• Routing traffic to specific web sites through Ethernet, rest via wifi on Mac OS X 10.6?

  - by user32448

  Hi I have two separate Internet connections connected to a Mac and I'd like one of them (via Ethernet eth0 gateway 192.168.2.1) to serve for just backing up to an remote online storage, and the other one (via Airport en1 gateway 192.168.1.1) for all other Internet traffic. I tried using "route" from the terminal as follows: sudo route add -host 98.207.226.113 -interface eth0 (just for testing against the site www.whatismyip.org whose IP is 98.207.226.113, to see through which gateway the traffic is routed) I can see using netstat that the route is added: $ netstat -rn -f inet Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.1.1 UGSc 49 0 en1 98.207.226.113 192.168.2.1 UGSc 0 0 eth0 However, the traffic in this case does NOT get routed properly through Ethernet, as if the routing definition I made is ignored. Any ideas? Thanks!

  Read the article

• How to run a local and external website on same computer with 2 NIC's, 2 Routers and 3 seperate networks?

  - by CandN

  Hello and hopefully I can get some answers to my question, though I think I'm making it more complicated for myself than it has to be. My business is a used auto dealership, and I'm in the process of connecting it to the world - via ethernet from the business server [running Xubuntu] to the ISP's ethernet router/modem, so that I can host our own website (no more than 5-10 people probably visiting at any time - mainly paying their bill), as well as set up a web based internal-intranet site - via DD-WRT Router on the 2nd NIC on the business server - that'll be accessed over Wifi from employees personal devices. On the other end of this is trying to offer free wifi to customers that is completely seperate of the 2 mentioned above networks. Quick Rundown: 1. Web Site for Customers to access. I'm going to use no-ip.org for DNS for the moment being, so I'll have a site that customers can access from anywhere in the world at "mybiz.no-ip.org". This will be forwarded to NIC #1 on the server, possibly at an address like "108.69.." as its being provided an IP from the ISP's modem/router, that is from Time Warner, and they allow NO! configuration options. Web Site for employees to access. I'm trying not to use the server too much as a desktop, only for critical situations, so having a backend thats seperate from the front-facing website is critical. This will be the DD-WRT router hardwired into NIC #2 on the server. This WiFi will be password accessible. Public WiFi for customers. The DD-WRT can seperate networks if I'm correct, I just can't seem to understand how to seperate the 2 and still have internet access on both. I've done it before, but the "Public" wifi (with no password set to connect) kept dropping the connection like a problem was happening that I couldn't figure out. So if I could do a little drawing, this is how it would/should possibly look. ISP -- [Sends Public Facing IP of 108.69.*.1/8] -- ISP Modem Router ISP Modem Router (Ethernet Only) -- [Gives Private IP 108.69.*.2] -- Server NIC #1 Server NIC #1 -- [Gives Private IP 108.69.*.3] -- DD-WRT Router DD-WRT Router -- [DHCP Enabled Giving IP's 172.16.0.0/16] -- Employees Network | | --------- [DHCP Enabled Giving IP's 192.168.1.0/24] -- Public WIFI Hope it's not too confusing, but it anyone could give me some good direct tutorials on how to accomplish this, or if YOU know, then it'll be alot of help. Thanks to all in advance. Need anything else to be explained? Don't hesitate to ask! *Using The LAMP stack with Webmin/VirtualMin -Customer site is located in /var/www2/ -Private Employees site is located in /var/www/ Using no-ip.org's dynamic client updater

  Read the article

• Can make the proxy settings invisible when I share my internet connection via wifi?

  - by Neil

  This is probably a long shot... I have an HTC Desire and frustratingly found out after I got it that it doesn't support network proxy settings. We have a wireless network at my office that uses a proxy. My desktop at work runs ubuntu. I was wondering if the following set up would work: Plug a USB Wireless adapter into the desktop that has a working internet connection using the proxy. Setup the wireless adapter as an ad-hoc network Share the internet connection over the ad-hoc network. Make it so that the use of the proxy is invisible to users of the shared network connection. Connect the Android phone to the ad-hoc wireless network and utilise the internet connection. My question is this: Is this possible or should I give up now and not even try? I think I can handle steps 1, 2, 3 and 5. I just have no idea if step 4 even makes sense, let alone is possible. Thanks

  Read the article

• How can we connect TP-link Access Point- TL-WA5210G with Wifi Lan card?

  - by PPS

  I would like to know that, We have a small Wireless Network that covers 40 mtrs indoor. Now we plan to expand our Network Coverage area apporx. 200 Mtrs (Outdoor). Due to our requirement we used TP- Link Access Point TL-WA5210G Outdoor(This AP covers 15Km area). We have 3 blocks between 200 mtrs, We like to connect all the laptops Lan Card directly with required Access-point. What should we do to achieve this, right now we are not getting the full strength signal, when we cross the 80 mtrs. So please suggest me proper configuration for implementing this TP-Link access point. Thanks PPS

  Read the article

• Netgear Router missing Wireless Configuration Menu Link

  - by ccisystems

  I have a Netgear WiFi router DG834G v3. On it it says it's a WiFi, ADSL 2+ modem, switch, etc. There is an antenna on the back and a WiFi indicator on the front. However, when I connect to it via the web interface, the wireless setup link is missing from the menu. The top label indicates it is a DG834 (without G). I have received it from a friend and was really looking forward to using it but I really need the WiFi part. I looked on Netgear's site as I thought someone must have uploaded the wrong firmware for the device sometime - so I upgraded to the latest firmware, but it still says it's NOT a 'G' device and the wireless menu is nowhere to be found. I'd appreciate a push in the right direction as to what I could do. Is it possible that the WiFi chip is broken or something and the device does not detect it and the firmware reverts the device to a different version?

  Read the article

• How to connect Android phone to a Wifi network using PPPoE?

  - by Slavo

  I have an ISP at home, which provides me with a PPPoE connection. My router supports that and I've configured it to autoconnect periodically, so I don't have to type my username and password each time. When I connect to the Wireless router from the PC, I have internet and everything works fine. However, when I do so using my Android phone, there's no internet connection on the phone. It connects to the router, but I cannot open any web page. How can I enable internet access from such an ISP on my phone? Is it something in the router setup? The router is Linksys WRT54GL.

  Read the article

• Asus EEE PC 1005HA (XP Home) refuses to connect to Virgin Mobile MiFi

  - by Dennis Wurster

  My client has an Asus EEE PC model 1005HA, and we're attempting to connect it to the WiFi network created by a VirginMobile MiFi unit. They also have a MacBook Pro with Snow Leopard that has absolutely no issue connecting to the MiFi. The specific symptom is that the netbook fails to lease an IP address from the MiFi unit. I supply the 12-digit numerical password (WPA) to the netbook, it throws a 'waiting for network' dialog with an indeterminate progress indicator, and then times out. Update: We've determined that this behavior has stopped when the EEE PC and the MiFi unit were taken out of the client's home, and to a different home that didn't have an existing wifi network. Similarly, when taken to a third location that didn't have wifi, the EEE PC and MiFi got along swimmingly. My current theory is that the existing wifi networks and the wifi leg of the MiFi unit are on the same channel and competing with one another. Perhaps the MacBook Pro has the capability to overcome this interference, while the EEE PC doesn't.

  Read the article

• Wireless device bug on 13.10. BCM4313 registers as eth1 instead of wlan0 and no internet access

  - by user205691

  My Hotel wiFi requires me to login with a username & password after connecting to the hotspot. So, my browser would open a page with username & passwrd fields to login and then connect to internet. But unfortunately, firefox & chromium dont seem to work. i dont think it is browser related but a setting for the wifi router or driver which is creating this issue. using Broadcom 801.11 STA wireless driver (proprietary). tried open source as well but same result !! The image linked below shows my wifi connection setting & Chromium. The login page itself comes up after a long time and after entering the credentials, it keeps loading for ever !! it is the same case for every other browser.. so i dont think its browser issue but something to do with wifi setting or network manager stuff.. interestingly, i am able to connect to WiFi networks with WPA key without any issue. Adhoc hotspot is a problem and that is my regular home network :( .. I hope i can get some help solving this issue ! I have tried repeating the same hotspot after login from my android, by creating a virtual repeater with WPA key and it works. I can browse on ubuntu using this method.. but cant be doing this regularly ! I tried loading the same login page of the hotel wifi while browsing through my repeater wifi created on mobile and screen shot attached below. the page loads up quick and easy.. so this means something is wrong with the way network manager handles adhoc connectivity & login ?? i installed wicd0 but it crashes on startup and not helpful at all ! Screenshot of Chromium page Login page with repeated hotspot ifconfig in my terminal results: krishna@krishna-HP-ENVY-4-Notebook-PC:~$ ifconfig eth0 Link encap:Ethernet HWaddr 28:92:4a:1d:54:fa UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr e0:06:e6:89:fa:49 inet addr:10.24.1.71 Bcast:10.24.1.255 Mask:255.255.255.0 inet6 addr: fe80::e206:e6ff:fe89:fa49/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10940 errors:0 dropped:0 overruns:0 frame:348431 TX packets:6611 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7669631 (7.6 MB) TX bytes:864195 (864.1 KB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:2146 errors:0 dropped:0 overruns:0 frame:0 TX packets:2146 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:166120 (166.1 KB) TX bytes:166120 (166.1 KB) I wonder why is the wireless configured under eth1 ? I think this is a bug with earlier ubuntu versions, but is this normal in 13.10 or is there a wrong configuration here ? The wireless device in my pc is BCM4313 and i have installed the bcmwl-kernel-sources, wireless-tools to support the device. i also reinstalled the bcmwl-kernel as suggested on broadcom website, via synaptic package manager. Nothing has changed this situation ! I tried booting into liveUSB and then ifconfig results show wireless under wlan0. But then the wireless connects and loads the login page. So is the problem with the device configuration now ? i really want to get this fixed before i start configuring the other stuff like ATI graphics and such on the laptop for overheating.. lack of internet access is too bad a bug for me :P any help is appreciated!

  Read the article

• How to sync my PDA (outlook, no wifi) with my Google Calendar?

  - by Peter

  Hey Everybody, We have an old PDA that is not networked (Mio 168). It's main purpose is to serve as an agenda for which we use the outlook that came with it. Now, as my wife usually has the PDA and I want to be able to check and update our agenda too, I'm looking for a way to sync it with Google Calendar by hooking it to my PC via USB. I found a tool to sync outlook with Google Calendar. However, I would need outlook on my PC to be able to use that and I don't have outlook on my PC, nor do I want to buy it just for this sync. So, does anybody here now if and how I can sync my outlook on my PDA with Google Calendar without the go between of a PC version of outlook? Cheers.

  Read the article

• What's the typical latency for key strokes using an ssh connection on a local wifi network?

  - by dan

  I develop software on a Macbook Air 1.6 Ghz but find running Rails test suites and generators on this computer very slow. I'm thinking about buying a Linux tower to put on my local wireless network to do my Rails development on. I would want to use my Macbook Air and ssh into the Linux box and do my development with Gnu Screen, vim, etc. Can I expect the keystroke and echo latency for a ssh session between two machines on a local wireless network to be negligible? Does anyone develop using this kind of local setup?

  Read the article

• In-Store Tracking Gets a Little Harder

  - by David Dorf

  Remember how Nordstrom was tracking shopper movements within their stores using the unique number, called a MAC, emitted by the WiFi radio in smartphones?  The phones didn't need to connect to the network, only have their WiFi enabled, as most people do by default.  They did this, presumably, to track shoppers' path to purchase and better understand traffic patterns.  Although there were signs explaining this at the entrances, people didn't like the notion of being tracked.  (Nevermind that there are cameras in the ceiling watching them.)  Nordstrom stopped the program. To address this concern the Future of Privacy, a Washington think tank, created Smart Store Privacy, a do-not-track service that allows consumers to register their MAC address in much the same way people register their phone numbers in the national do-not-call list.  A group of companies agreed to respect consumers' wishes and ignore smartphones listed in the database.  The database includes Bluetooth identifiers as well.  Of course you could simply turn your bluetooth and WiFi off when shopping as well. Most know that Apple prefers to use BLE beacons to contact and track smartphones within their stores.  This feature extends the typical online experience to also work in physical stores.  By identifying themselves, shoppers can expect a more tailored shopping experience much like what we've come to expect from Amazon's website, with product recommendations and offers that are (usually) relevant. But the upcoming release of iOS8 is purported to have a new feature that randomizes the WiFi MAC address of smartphones during the "probing" phase.  That is, before connecting to the WiFi network, a random MAC number is used so as to keep the smartphone's real MAC address secret.  Unless you actually connect to the store's WiFi, they won't recognize the MAC address. The details on this are still sketchy, but if the random MAC is consistent for a short period, retailers will still be able to track movements anonymously, but they won't recognize repeat visitors.  That may be sufficient for traffic analytics, but it will stymie target marketing.  In the case of marketing, using iBeacons with opt-in permission from consumers will be the way forward. There is always a battle between utility and privacy, so I expect many more changes in this area.  Incidentally, if you'd like to see where beacons are being used this site tracks them around the world.

  Read the article

• How to change the MAC address in Win 8 to spoof a Roku Player through a WiFi splash page?

  - by luser droog

  My Linux laptop died yesterday and now I can't watch TV. Let me explain. I use a Roku Player to stream Netflix shows to my television; and a year or two ago, the Internet Service provided in my apartment complex added a Splash Page to get through the router and onto the net. After not too many days, I remembered that internet devices identify themselves with a MAC address. So I delved into the manpage of ifconfig and discovered that I could persuade my laptop to pretend to be the Roku Player, connect, click through the Splash Page, disconnect and change it back. This would allow the Roku to connect for about 24 hours, when I would have to do it again. But the laptop died yesterday during my smoke break. So during lunch, I ran to OfficeMax and got a new one. But I don't know where to begin looking for where to change the MAC address (assuming it's possible). I know I can try dual-boot, or a keychain OS, or possibly other things to resurrect my old method. But, is it possible to get Windows do it?

  Read the article

• Two routers in a LAN

  - by taxi

  router A no wifi +--- pc01 +--- pc02 | +--- router B wifi +--- pc03 +--- printer In my LAN I have a modem-router (say A) (no wifi connection) acting as DHCP server, and connected to the Internet. Now, I want to add another router (say B) (with wifi connection) to the LAN, in order to connect wifi pc's and net printers. Here I would disable DCHP server functionality. Is it correct to connect router B to router A via an ethernet port? In router A I define an IP address (eg 192.168.1.100) to be assigned to router B (MAC address). I expect to see router B listed as an attached device, in router A's status, but on the contrary it is not listed.

  Read the article

• How can I use my Windows 7 computer to share WiFi connection with PCs that don't have wireless?

  - by Tom Auger

  Long story short: modem and wireless router are downstairs and we're having a LAN party where some visitors don't have wireless. There's no way to run the length of cabling required, so looking for options. My Windows 7 Home Premium PC has a wireless-n connection, and I'd like to see if I can use it as a "hub" or switch of sorts, running an ethernet cable out of the back and into a switch, then splitting off to the other PCs. Is this an option? I know with Internet sharing, you can set up your PC as a wireless access point, but I want to do the opposite.

  Read the article

• What if any free video player for windows can I set a custom frame buffer for streaming over the wifi?

  - by user268883

  I currently use DAUM PLayer (Pot Player) but I have problems streaming video to my laptop unless it is plugged into the network. An easy fix (so I thought) would be to find a player were I could adjust the cache / buffer so say 5 mins+ is read to the local Hdrive and then played from there... I can not work out how to do this in any player I have VLC, MPCHC and DAUM installed. All I want to do is increase the file buffer so X amount of the networkfile is copied to the local drive and then played... so all stuttering is stopped? How do I do this?

  Read the article

< Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >