complex strings - Page 351

PASS Summit 2010 BI Workshop Feedbacks

- by Davide Mauri

As many other speakers already did, I’d like to share with the SQL Community the feedback of my PASS Summit 2010 Workshop. For those who were not there, my workshop was the “BI From A-Z” and the main objective of that workshop was to introduce people in the BI world not only from a technical point of view but insist a lot on the methodological and “engineered” approach. The will to put more engineering in the IT (and specially in the BI field) is something that has been growing stronger and stronger in me every day for of this last 5 years since is simply envy the fact that Airbus, Fincatieri, BMW (just to name a few) can create very complex machine “just” using putting people together and giving them some rules to follow (Of course this is an oversimplification but I think you get what I mean). The key point of engineering is that, after having defined the project blueprint, you have the possibility to give to a huge number of people, the rules to follow, the correct tools in order to implement the rules easily and semi-automatically and a way to measure the quality of the results. Could this be done in IT? Very big question, so my scope is now limited to BI. So that’s the main point of my workshop: and entry-level approach to BI (level was 200) in order to allow attendees to know the basics, to understand what tools they should use for which purpose and, above all, a set of rules and tools in order to make a BI solution scalable in terms of people working on it, while still maintaining a very good quality. All done not focusing only on the practice but explaining the theory behind to see how it can help *a lot* to build a correct solution despite the technology used to implement it. The idea is to reach a point where more then 70% of the work done to create a BI solution can be reused even if technologies changes. This is a very demanding challenge nowadays with the coming of Denali and its column-aligned storage and the shiny-new DAX language. As you may understand I was looking forward to get the feedback since you may have noticed that there’s a lot of “architectural” stuff in IT but really nothing on “engineering”. So how the session could be perceived by the attendees was really unknown to me. The feedback could also give a good indication if the need of more “engineering” is something I feel only by myself or if is something more broad. I’m very happy to be able to say that the overall score of 4.75 put my workshop in the TOP 20 session (on near 200 sessions)! Here’s the detailed evaluations: How would you rate the usefulness of the information presented in your day-to-day environment? 4.75 Answer: # of Responses 3 1 4 12 5 42 How would you rate the Speaker's presentation skills? 4.80 Answer: # of Responses 3 : 1 4 : 9 5 : 45 How would you rate the Speaker's knowledge of the subject? 4.95 Answer: # of Responses 4 : 3 5 : 52 How would you rate the accuracy of the session title, description and experience level to the actual session? 4.75 Answer: # of Responses 3 : 2 4 : 10 5 : 43 How would you rate the amount of time allocated to cover the topic/session? 4.44 Answer: # of Responses 3 : 7 4 : 17 5 : 31 How would you rate the quality of the presentation materials? 4.62 Answer: # of Responses 4 : 21 5 : 34 The comments where all very positive. Many of them asked for more time on the subject (or to shorten the very last topics). I’ll make treasure of these comments and will review the content accordingly. We’ll organize a two-day classes on this topic, where also more examples will be shown and some arguments will be explained more deeply. I’d just like to answer a comment that asks how much of what I shown is “universally applicable”. I can tell you that all of our BI project follow these rules and they’ve been applied to different markets (Insurance, Fashion, GDO) with different people and different teams and they allowed us to be “Adaptive” against the customer. The more the rules are well defined and the more there are tools that supports their implementations, the easier is to add new people to the project and to add or change solution features. Think of a car. How come that almost any mechanic can help you to fix a problem? Because they know what to expect. Because there a rules that allow them to identify the problem without having to discover each time how the car has been implemented build. And this is of course also true for car upgrades/improvements. Last but not least: thanks a lot to everyone for coming!

Read the article

Consuming ASP.NET Web API services from PHP script

- by DigiMortal

I introduced ASP.NET Web API in some of my previous posts. Although Web API is easy to use in ASP.NET web applications you can use Web API also from other platforms. This post shows you how to consume ASP.NET Web API from PHP scripts. Here are my previous posts about Web API: How content negotiation works? ASP.NET Web API: Extending content negotiation with new formats Query string based content formatting Although these posts cover content negotiation they give you some idea about how Web API works. Test application On Web API side I use the same sample application as in previous Web API posts – very primitive web application to manage contacts. Listing contacts On the other machine I will run the following PHP script that works against my Web API application: <?php // request list of contacts from Web API $json = file_get_contents('http://vs2010dev:3613/api/contacts/'); // deserialize data from JSON $contacts = json_decode($json); ?> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> </head> <body> <table> <?php foreach($contacts as $contact) { ?> <tr> <td valign="top"> <?php echo $contact->FirstName ?> </td> <td valign="top"> <?php echo $contact->LastName ?> </td> <td valign="middle"> <form method="POST"> <input type="hidden" name="id" value="<?php echo $contact-/>Id ?>" /> <input type="submit" name="cmd" value="Delete"/> </form> </td> </tr> <?php } ?> </table> </body> </html> Notice how easy it is to handle JSON data in PHP! My PHP script produces the following output: Looks like data is here as it should be. Deleting contacts Now let’s write code to delete contacts. Add this block of code before any other code in PHP script. if(@$_POST['cmd'] == 'Delete') { $errno = 0; $errstr = ''; $id = @$_POST['id']; $params = array('http' => array( 'method' => 'DELETE', 'content' => "" )); $url = 'http://vs2010dev:3613/api/contacts/'.$id; $ctx = stream_context_create($params); $fp = fopen($url, 'rb', false, $ctx); if (!$fp) { $res = false; } else { $res = stream_get_contents($fp); } fclose($fp); header('Location: /json.php'); exit; } Again simple code. If we write also insert and update methods we may want to bundle those operations to single class. Conclusion ASP.NET Web API is not only ASP.NET fun. It is available also for all other platforms. In this posting we wrote simple PHP client that is able to communicate with our Web API application. We wrote only some simple code, nothing complex. Same way we can use also platforms like Java, PERL and Ruby.

Read the article

Organization & Architecture UNISA Studies – Chap 4

- by MarkPearl

Learning Outcomes Explain the characteristics of memory systems Describe the memory hierarchy Discuss cache memory principles Discuss issues relevant to cache design Describe the cache organization of the Pentium Computer Memory Systems There are key characteristics of memory… Location – internal or external Capacity – expressed in terms of bytes Unit of Transfer – the number of bits read out of or written into memory at a time Access Method – sequential, direct, random or associative From a users perspective the two most important characteristics of memory are… Capacity Performance – access time, memory cycle time, transfer rate The trade off for memory happens along three axis… Faster access time, greater cost per bit Greater capacity, smaller cost per bit Greater capacity, slower access time This leads to people using a tiered approach in their use of memory As one goes down the hierarchy, the following occurs… Decreasing cost per bit Increasing capacity Increasing access time Decreasing frequency of access of the memory by the processor The use of two levels of memory to reduce average access time works in principle, but only if conditions 1 to 4 apply. A variety of technologies exist that allow us to accomplish this. Thus it is possible to organize data across the hierarchy such that the percentage of accesses to each successively lower level is substantially less than that of the level above. A portion of main memory can be used as a buffer to hold data temporarily that is to be read out to disk. This is sometimes referred to as a disk cache and improves performance in two ways… Disk writes are clustered. Instead of many small transfers of data, we have a few large transfers of data. This improves disk performance and minimizes processor involvement. Some data designed for write-out may be referenced by a program before the next dump to disk. In that case the data is retrieved rapidly from the software cache rather than slowly from disk. Cache Memory Principles Cache memory is substantially faster than main memory. A caching system works as follows.. When a processor attempts to read a word of memory, a check is made to see if this in in cache memory… If it is, the data is supplied, If it is not in the cache, a block of main memory, consisting of a fixed number of words is loaded to the cache. Because of the phenomenon of locality of references, when a block of data is fetched into the cache, it is likely that there will be future references to that same memory location or to other words in the block. Elements of Cache Design While there are a large number of cache implementations, there are a few basic design elements that serve to classify and differentiate cache architectures… Cache Addresses Cache Size Mapping Function Replacement Algorithm Write Policy Line Size Number of Caches Cache Addresses Almost all non-embedded processors support virtual memory. Virtual memory in essence allows a program to address memory from a logical point of view without needing to worry about the amount of physical memory available. When virtual addresses are used the designer may choose to place the cache between the MMU (memory management unit) and the processor or between the MMU and main memory. The disadvantage of virtual memory is that most virtual memory systems supply each application with the same virtual memory address space (each application sees virtual memory starting at memory address 0), which means the cache memory must be completely flushed with each application context switch or extra bits must be added to each line of the cache to identify which virtual address space the address refers to. Cache Size We would like the size of the cache to be small enough so that the overall average cost per bit is close to that of main memory alone and large enough so that the overall average access time is close to that of the cache alone. Also, larger caches are slightly slower than smaller ones. Mapping Function Because there are fewer cache lines than main memory blocks, an algorithm is needed for mapping main memory blocks into cache lines. The choice of mapping function dictates how the cache is organized. Three techniques can be used… Direct – simplest technique, maps each block of main memory into only one possible cache line Associative – Each main memory block to be loaded into any line of the cache Set Associative – exhibits the strengths of both the direct and associative approaches while reducing their disadvantages For detailed explanations of each approach – read the text book (page 148 – 154) Replacement Algorithm For associative and set associating mapping a replacement algorithm is needed to determine which of the existing blocks in the cache must be replaced by a new block. There are four common approaches… LRU (Least recently used) FIFO (First in first out) LFU (Least frequently used) Random selection Write Policy When a block resident in the cache is to be replaced, there are two cases to consider If no writes to that block have happened in the cache – discard it If a write has occurred, a process needs to be initiated where the changes in the cache are propagated back to the main memory. There are several approaches to achieve this including… Write Through – all writes to the cache are done to the main memory as well at the point of the change Write Back – when a block is replaced, all dirty bits are written back to main memory The problem is complicated when we have multiple caches, there are techniques to accommodate for this but I have not summarized them. Line Size When a block of data is retrieved and placed in the cache, not only the desired word but also some number of adjacent words are retrieved. As the block size increases from very small to larger sizes, the hit ratio will at first increase because of the principle of locality, which states that the data in the vicinity of a referenced word are likely to be referenced in the near future. As the block size increases, more useful data are brought into cache. The hit ratio will begin to decrease as the block becomes even bigger and the probability of using the newly fetched information becomes less than the probability of using the newly fetched information that has to be replaced. Two specific effects come into play… Larger blocks reduce the number of blocks that fit into a cache. Because each block fetch overwrites older cache contents, a small number of blocks results in data being overwritten shortly after they are fetched. As a block becomes larger, each additional word is farther from the requested word and therefore less likely to be needed in the near future. The relationship between block size and hit ratio is complex, and no set approach is judged to be the best in all circumstances. Pentium 4 and ARM cache organizations The processor core consists of four major components: Fetch/decode unit – fetches program instruction in order from the L2 cache, decodes these into a series of micro-operations, and stores the results in the L2 instruction cache Out-of-order execution logic – Schedules execution of the micro-operations subject to data dependencies and resource availability – thus micro-operations may be scheduled for execution in a different order than they were fetched from the instruction stream. As time permits, this unit schedules speculative execution of micro-operations that may be required in the future Execution units – These units execute micro-operations, fetching the required data from the L1 data cache and temporarily storing results in registers Memory subsystem – This unit includes the L2 and L3 caches and the system bus, which is used to access main memory when the L1 and L2 caches have a cache miss and to access the system I/O resources

Read the article

How to trace a function array argument in DTrace

- by uejio

I still use dtrace just about every day in my job and found that I had to print an argument to a function which was an array of strings. The array was variable length up to about 10 items. I'm not sure if the is the right way to do it, but it seems to work and is not too painful if the array size is small.Here's an example. Suppose in your application, you have the following function, where n is number of item in the array s.void arraytest(int n, char **s){ /* Loop thru s[0] to s[n-1] */}How do you use DTrace to print out the values of s[i] or of s[0] to s[n-1]? DTrace does not have if-then blocks or for loops, so you can't do something like: for i=0; i<arg0; i++ trace arg1[i]; It turns out that you can use probe ordering as a kind of iterator. Probes with the same name will fire in the order that they appear in the script, so I can save the value of "n" in the first probe and then use it as part of the predicate of the next probe to determine if the other probe should fire or not. So the first probe for tracing the arraytest function is:pid$target::arraytest:entry{ self->n = arg0;}Then, if I want to print out the first few items of the array, I first check the value of n. If it's greater than the index that I want to print out, then I can print that index. For example, if I want to print out the 3rd element of the array, I would do something like:pid$target::arraytest:entry/self->n > 2/{ printf("%s",stringof(arg1 + 2 * sizeof(pointer)));}Actually, that doesn't quite work because arg1 is a pointer to an array of pointers and needs to be copied twice from the user process space to the kernel space (which is where dtrace is). Also, the sizeof(char *) is 8, but for some reason, I have to use 4 which is the sizeof(uint32_t). (I still don't know how that works.) So, the script that prints the 3rd element of the array should look like:pid$target::arraytest:entry{ /* first, save the size of the array so that we don't get invalid address errors when indexing arg1+n. */ self->n = arg0;}pid$target::arraytest:entry/self->n > 2/{ /* print the 3rd element (index = 2) of the second arg. */ i = 2; size = 4; self->a_t = copyin(arg1+size*i,size); printf("%s: a[%d]=%s",probefunc,i,copyinstr(*(uint32_t *)self->a_t));}If your array is large, then it's quite painful since you have to write one probe for every array index. For example, here's the full script for printing the first 5 elements of the array:#!/usr/sbin/dtrace -spid$target::arraytest:entry{ /* first, save the size of the array so that we don't get invalid address errors when indexing arg1+n. */ self->n = arg0;}pid$target::arraytest:entry/self->n > 0/{ i = 0; size = sizeof(uint32_t); self->a_t = copyin(arg1+size*i,size); printf("%s: a[%d]=%s",probefunc,i,copyinstr(*(uint32_t *)self->a_t));}pid$target::arraytest:entry/self->n > 1/{ i = 1; size = sizeof(uint32_t); self->a_t = copyin(arg1+size*i,size); printf("%s: a[%d]=%s",probefunc,i,copyinstr(*(uint32_t *)self->a_t));}pid$target::arraytest:entry/self->n > 2/{ i = 2; size = sizeof(uint32_t); self->a_t = copyin(arg1+size*i,size); printf("%s: a[%d]=%s",probefunc,i,copyinstr(*(uint32_t *)self->a_t));}pid$target::arraytest:entry/self->n > 3/{ i = 3; size = sizeof(uint32_t); self->a_t = copyin(arg1+size*i,size); printf("%s: a[%d]=%s",probefunc,i,copyinstr(*(uint32_t *)self->a_t));}pid$target::arraytest:entry/self->n > 4/{ i = 4; size = sizeof(uint32_t); self->a_t = copyin(arg1+size*i,size); printf("%s: a[%d]=%s",probefunc,i,copyinstr(*(uint32_t *)self->a_t));} If the array is large, then your script will also have to be very long to print out all values of the array.

Read the article

Clearing C#'s WebBrowser control's cookies for all sites WITHOUT clearing for IE itself

- by Helgi Hrafn Gunnarsson

Hail StackOverflow! The short version of what I'm trying to do is in the title. Here's the long version. I have a bit of a complex problem which I'm sure I will receive a lot of guesses as a response to. In order to keep the well-intended but unfortunately useless guesses to a minimum, let me first mention that the solution to this problem is not simple, so simple suggestions will unfortunately not help at all, even though I appreciate the effort. C#'s WebBrowser component is fundamentally IE itself so solutions with any sorts of caveats will almost certainly not work. I need to do exactly what I'm trying to do, and even a seemingly minor caveat will defeat the purpose completely. At the risk of sounding arrogant, I need assistance from someone who really has in-depth knowledge about C#'s WebBrowser and/or WinInet and/or how to communicate with Windows's underlying system from C#... or how to encapsulate C++ code in C#. That said, I don't expect anyone to do this for me, and I've found some promising hints which are explained later in this question. But first... what I'm trying to achieve is this. I have a Windows.Forms component which contains a WebBrowser control. This control needs to: Clear ALL cookies for ALL websites. Visit several websites, one after another, and record cookies and handle them correctly. This part works fine already so I don't have any problems with this. Rinse and repeat... theoretically forever. Now, here's the real problem. I need to clear all those cookies (for any and all sites), but only for the WebBrowser control itself and NOT the cookies which IE proper uses. What's fundamentally wrong with this approach is of course the fact that C#'s WebBrowser control is IE. But I'm a stubborn young man and I insist on it being possible, or else! ;) Here's where I'm stuck at the moment. It is quite simply impossible to clear all cookies for the WebBrowser control programmatically through C# alone. One must use DllImport and all the crazy stuff that comes with it. This chunk works fine for that purpose: [DllImport("wininet.dll", SetLastError = true)] private static extern bool InternetSetOption(IntPtr hInternet, int dwOption, IntPtr lpBuffer, int lpdwBufferLength); And then, in the function that actually does the clearing of the cookies: InternetSetOption(IntPtr.Zero, INTERNET_OPTION_END_BROWSER_SESSION, IntPtr.Zero, 0); Then all the cookies get cleared and as such, I'm happy. The program works exactly as intended, aside from the fact that it also clears IE's cookies, which must not be allowed to happen. The problem is that this also clears the cookies for IE proper, and I can't have that happen. From one fellow StackOverflower (if that's a word), Sheng Jiang proposed this to a different problem in a comment, but didn't elaborate further: "If you want to isolate your application's cookies you need to override the Cache directory registry setting via IDocHostUIHandler2::GetOverrideKeyPath" I've looked around the internet for IDocHostUIHandler2 and GetOverrideKeyPath, but I've got no idea of how to use them from C# to isolate cookies to my WebBrowser control. My experience with the Windows registry is limited to RegEdit (so I understand that it's a tree structure with different data types but that's about it... I have no in-depth knowledge of the registry's relationship with IE, for example). Here's what I dug up on MSDN: IDocHostUIHandler2 docs: http://msdn.microsoft.com/en-us/library/aa753275%28VS.85%29.aspx GetOverrideKeyPath docs: http://msdn.microsoft.com/en-us/library/aa753274%28VS.85%29.aspx I think I know roughly what these things do, I just don't know how to use them. So, I guess that's it! Any help is greatly appreciated.

Read the article

WPF TabControl - how to preserve control state within tab items (MVVM pattern)

- by Tim Coulter

I am a newcomer to WPF, attempting to build a project that follows the recommendations of Josh Smith's excellent article describing The Model-View-ViewModel Design Pattern. Using Josh's sample code as a base, I have created a simple application that contains a number of "workspaces", each represented by a tab in a TabControl. In my application, a workspace is a document editor that allows a hierarchical document to be manipulated via a TreeView control. Although I have succeeded in opening multiple workspaces and viewing their document content in the bound TreeView control, I find that the TreeView "forgets" its state when switching between tabs. For example, if the TreeView in Tab1 is partially expanded, it will be shown as fully collapsed after switching to Tab2 and returning to Tab1. This behaviour appears to apply to all aspects of control state for all controls. After some experimentation, I have realized that I can preserve state within a TabItem by explicitly binding each control state property to a dedicated property on the underlying ViewModel. However, this seems like a lot of additional work, when I simply want all my controls to remember their state when switching between workspaces. I assume I am missing something simple, but I am not sure where to look for the answer. Any guidance would be much appreciated. Thanks, Tim Update: As requested, I will attempt to post some code that demonstrates this problem. However, since the data that underlies the TreeView is complex, I will post a simplified example that exhibits the same symtoms. Here is the XAML from the main window: <TabControl IsSynchronizedWithCurrentItem="True" ItemsSource="{Binding Path=Docs}"> <TabControl.ItemTemplate> <DataTemplate> <ContentPresenter Content="{Binding Path=Name}" /> </DataTemplate> </TabControl.ItemTemplate> <TabControl.ContentTemplate> <DataTemplate> <view:DocumentView /> </DataTemplate> </TabControl.ContentTemplate> </TabControl> The above XAML correctly binds to an ObservableCollection of DocumentViewModel, whereby each member is presented via a DocumentView. For the simplicity of this example, I have removed the TreeView (mentioned above) from the DocumentView and replaced it with a TabControl containing 3 fixed tabs: <TabControl> <TabItem Header="A" /> <TabItem Header="B" /> <TabItem Header="C" /> </TabControl> In this scenario, there is no binding between the DocumentView and the DocumentViewModel. When the code is run, the inner TabControl is unable to remember its selection when the outer TabControl is switched. However, if I explicitly bind the inner TabControl's SelectedIndex property ... <TabControl SelectedIndex="{Binding Path=SelectedDocumentIndex}"> <TabItem Header="A" /> <TabItem Header="B" /> <TabItem Header="C" /> </TabControl> ... to a corresponding dummy property on the DocumentViewModel ... public int SelecteDocumentIndex { get; set; } ... the inner tab is able to remember its selection. I understand that I can effectively solve my problem by applying this technique to every visual property of every control, but I am hoping there is a more elegant solution.

Read the article

Parse JSON in C#

- by Ender

I'm trying to parse some JSON data from the Google AJAX Search API. I have this URL and I'd like to break it down so that the results are displayed. I've currently written this code, but I'm pretty lost in regards of what to do next, although there are a number of examples out there with simplified JSON strings. Being new to C# and .NET in general I've struggled to get a genuine text output for my ASP.NET page so I've been recommended to give JSON.NET a try. Could anyone point me in the right direction to just simply writing some code that'll take in JSON from the Google AJAX Search API and print it out to the screen? EDIT: I think I've made some progress in regards to getting some code working using DataContractJsonSerializer. Here is the code I have so far. Any advice on whether this is close to working and/or how I would output my results in a clean format? EDIT 2: I've followed the advice from Dreas Grech and the StackOverflowException has gone. However, now I am getting no output. Any ideas on where to go next? EDIT 3: ALL FIXED! All results are working fine. Thank you again Dreas Grech! using System; using System.Data; using System.Configuration; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Web.UI.HtmlControls; using System.ServiceModel.Web; using System.Runtime.Serialization; using System.Runtime.Serialization.Json; using System.IO; using System.Text; public partial class _Default : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { GoogleSearchResults g1 = new GoogleSearchResults(); const string json = @"{""responseData"": {""results"":[{""GsearchResultClass"":""GwebSearch"",""unescapedUrl"":""http://www.cheese.com/"",""url"":""http://www.cheese.com/"",""visibleUrl"":""www.cheese.com"",""cacheUrl"":""http://www.google.com/search?q\u003dcache:bkg1gwNt8u4J:www.cheese.com"",""title"":""\u003cb\u003eCHEESE\u003c/b\u003e.COM - All about \u003cb\u003echeese\u003c/b\u003e!."",""titleNoFormatting"":""CHEESE.COM - All about cheese!."",""content"":""\u003cb\u003eCheese\u003c/b\u003e - everything you want to know about it. Search \u003cb\u003echeese\u003c/b\u003e by name, by types of milk, by textures and by countries.""},{""GsearchResultClass"":""GwebSearch"",""unescapedUrl"":""http://en.wikipedia.org/wiki/Cheese"",""url"":""http://en.wikipedia.org/wiki/Cheese"",""visibleUrl"":""en.wikipedia.org"",""cacheUrl"":""http://www.google.com/search?q\u003dcache:n9icdgMlCXIJ:en.wikipedia.org"",""title"":""\u003cb\u003eCheese\u003c/b\u003e - Wikipedia, the free encyclopedia"",""titleNoFormatting"":""Cheese - Wikipedia, the free encyclopedia"",""content"":""\u003cb\u003eCheese\u003c/b\u003e is a food consisting of proteins and fat from milk, usually the milk of cows, buffalo, goats, or sheep. It is produced by coagulation of the milk \u003cb\u003e...\u003c/b\u003e""},{""GsearchResultClass"":""GwebSearch"",""unescapedUrl"":""http://www.ilovecheese.com/"",""url"":""http://www.ilovecheese.com/"",""visibleUrl"":""www.ilovecheese.com"",""cacheUrl"":""http://www.google.com/search?q\u003dcache:GBhRR8ytMhQJ:www.ilovecheese.com"",""title"":""I Love \u003cb\u003eCheese\u003c/b\u003e!, Homepage"",""titleNoFormatting"":""I Love Cheese!, Homepage"",""content"":""The American Dairy Association\u0026#39;s official site includes recipes and information on nutrition and storage of \u003cb\u003echeese\u003c/b\u003e.""},{""GsearchResultClass"":""GwebSearch"",""unescapedUrl"":""http://www.gnome.org/projects/cheese/"",""url"":""http://www.g

Read the article

Does the ulkJSON library have limitations when dealing with base64 in Delphi 7?

- by Da Gopherboy

I'm working on a project that is using Delphi 7 to consume RESTful services. We are creating and decoding JSON with the ulkJSON library. Up to this point I've been able to successfully build and send JSON containing a base64 string that exceed 5,160kb. I can verify that the base64 is being received by the services and verify the integrity of the base64 once its there. In addition to sending, I can also receive and successfully decode JSON with a smaller (~ 256KB or less) base64. However I am experiencing some issues on the return trip when larger (~1,024KB+) base64 is involved for some reason. Specifically when attempting to use the following JSON format and function combination: JSON: { "message" : "/9j/4AAQSkZJRgABAQEAYABgAAD...." } Function: function checkResults(JSONFormattedString: String): String; var jsonObject : TlkJSONObject; iteration : Integer; i : Integer; x : Integer; begin jsonObject := TlkJSONobject.Create; // Validate that the JSONFormatted string is not empty. // If it is empty, inform the user/programmer, and exit from this routine. if JSONFormattedString = '' then begin result := 'Error: JSON returned is Null'; jsonObject.Free; exit; end; // Now that we can validate that this string is not empty, we are going to // assume that the string is a JSONFormatted string and attempt to parse it. // // If the string is not a valid JSON object (such as an http status code) // throw an exception informing the user/programmer that an unexpected value // has been passed. And exit from this routine. try jsonObject := TlkJSON.ParseText(JSONFormattedString) as TlkJSONobject; except on e:Exception do begin result := 'Error: No JSON was received from web services'; jsonObject.Free; exit; end; end; // Now that the object has been parsed, lets check the contents. try result := jsonObject.Field['message'].value; jsonObject.Free; exit; except on e:Exception do begin result := 'Error: No Message received from Web Services '+e.message; jsonObject.Free; exit; end; end; end; As mentioned above when using the above function, I am able to get small (256KB and less) base64 strings out of the 'message' field of a JSON object. But for some reason if the received JSON is larger than say 1,024kb the following line seems to just stop in its tracks: jsonObject := TlkJSON.ParseText(JSONFormattedString) as TlkJSONobject; No errors, no results. Following the debugger, I can go into the library, and see that the JSON string being passed is not considered to be JSON despite being in the format listed above. The only difference I can find between calls that work as expected and calls that do not work as expect appears to be the size of base64 being transmitted. Am I missing something completely obvious and should be shot for my code implementation (very possible)? Have I missed some notation regarding the limitations of the ulkJSON library? Any input would be extremely helpful. Thanks in advance stack!

Read the article

WPF Styles and Tooltips Question

- by A.R.

I have a style that I am using to make dynamic tooltips on certain text boxes like so. <Style TargetType="{x:Type TextBox}"> <Setter Property="MinWidth" Value="100"/> <Style.Triggers> <Trigger Property="Validation.HasError" Value="True">  <Setter Property="ToolTip"> <Setter.Value> <MultiBinding Converter="{StaticResource ErrorMessageConverter}"> <Binding RelativeSource="{RelativeSource Self}" Path="Tag"/> </MultiBinding> </Setter.Value> </Setter> </Trigger> </Style.Triggers> </Style> This works very well, but if I want to use a more complex tooltip I can't figure out how to bind to 'Tag' anymore for the converter value. For example; ... <Setter Property="ToolTip"> <Setter.Value> <StackPanel> <TextBlock> <TextBlock.Text> <MultiBinding Converter="{StaticResource ErrorMessageConverter}">  <Binding RelativeSource=" what goes here?? "/> </MultiBinding> </TextBlock.Text> </TextBlock> <Image/> </StackPanel> </Setter.Value> </Setter> ... I have tried several flavors of 'FindAncestor' and what not for the relative source, but I can't get anything to work. Any ideas?? UPDATE: 12-29-2010 : Here is the correct code, answer provided by our friend Goblin below. Works perfectly! ... <Setter Property="ToolTip"> <Setter.Value>  <ToolTip DataContext="{Binding Path=PlacementTarget, RelativeSource={x:Static RelativeSource.Self}}"> <StackPanel> <Image/> <TextBlock> <TextBlock.Text> <MultiBinding Converter="{StaticResource ErrorMessageConverter}"> <Binding Path="Tag"/> </MultiBinding> </TextBlock.Text> </TextBlock> </StackPanel> </ToolTip> </Setter.Value> </Setter> ...

Read the article

System.AccessViolationException when calling DLL from WCF on IIS.

- by Wodzu

Hi guys. I've created just a test WCF service in which I need to call an external DLL. Everything works fine under Visutal Studio development server. However, when I try to use my service on IIS I am getting this error: Exception: System.AccessViolationException Message: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. The stack trace leeds to the call of DLL which is presented below. After a lot of reading and experimenting I am almost sure that the error is caused by wrong passing strings to the called function. Here is how the wrapper for DLL looks like: using System; using System.Runtime.InteropServices; using System.Text; using System; using System.Security; using System.Security.Permissions; using System.Runtime.InteropServices; namespace cdn_api_wodzu { public class cdn_api_wodzu { [DllImport("cdn_api.dll", CharSet=CharSet.Ansi)] // [SecurityPermission(SecurityAction.Assert, Unrestricted = true)] public static extern int XLLogin([In, Out] XLLoginInfo _lLoginInfo, ref int _lSesjaID); } [Serializable, StructLayout(LayoutKind.Sequential)] public class XLLoginInfo { public int Wersja; public int UtworzWlasnaSesje; public int Winieta; public int TrybWsadowy; [MarshalAs(UnmanagedType.ByValTStr, SizeConst = 0x29)] public string ProgramID; [MarshalAs(UnmanagedType.ByValTStr, SizeConst = 0x15)] public string Baza; [MarshalAs(UnmanagedType.ByValTStr, SizeConst = 9)] public string OpeIdent; [MarshalAs(UnmanagedType.ByValTStr, SizeConst = 9)] public string OpeHaslo; [MarshalAs(UnmanagedType.ByValTStr, SizeConst = 200)] public string PlikLog; [MarshalAs(UnmanagedType.ByValTStr, SizeConst = 0x65)] public string SerwerKlucza; public XLLoginInfo() { } } } this is how I call the DLL function: int ErrorID = 0; int SessionID = 0; XLLoginInfo Login; Login = new XLLoginInfo(); Login.Wersja = 18; Login.UtworzWlasnaSesje = 1; Login.Winieta = -1; Login.TrybWsadowy = 1; Login.ProgramID = "TestProgram"; Login.Baza = "TestBase"; Login.OpeIdent = "TestUser"; Login.OpeHaslo = "TestPassword"; Login.PlikLog = "C:\\LogFile.txt"; Login.SerwerKlucza = "MyServ\\MyInstance"; ErrorID = cdn_api_wodzu.cdn_api_wodzu.XLLogin(Login, ref SessionID); When I comment all the string field assigments the function works - it returns me an error message that the program ID has not been given. But when I try to assign a ProgramID (or any other string fields, or all at once) then I am getting the mentioned exception. I am using VS2008 SP.1, WinXP and IIS 5.1. Maybe the ISS itself is a problem? I've tried all the workarounds that has been described here: http://forums.asp.net/t/675515.aspx Thansk for your time. After edit: Installing Windows 2003 Server and IIS 6.0 solved the problem.

Read the article

Edit and render RichText

- by OregonGhost

We have an application (a custom network management tool for building automation) that supports printing labels that you can cut out and insert into the devices' front displays. In earlier versions of the tool (not developed in my company), the application just pushed the strings into an Excel file that the field technician could then manipulate (like formatting text). We didn't do this in the new version because it was hard (impossible) to keep the Excel file in sync, and to avoid a binding to an external application (let alone different versions of Excel). We're using PDFSharp for rendering the labels. It has a System.Drawing-like interface, but can output to a System.Drawing.Graphics (screen / printer) as well as to a PDF file, which is a requirement. Later, basic formatting was introduced like Font Family, Style, Size, Color which would apply to one label (i.e. to exactly one string). Now the customer wants to be able to apply these formats to single characters in a string. I think the easiest way would be to support a subset of RichText. It's not as easy as I thought though. Currently the editor just displays a TextBox for the label you want to edit, with the font set to the label's font. I thought I'd just replace it with RichTextBox, and update the formatting buttons to use the RichTextBox formatting properties. Fairly easy. However, I need to draw the text. I know you can get the RichTextBox to draw to a HDC or System.Drawing.Graphics - but as already said, I need it to use PDFSharp. Rendering to bitmaps is not an option, since the PDF must not be huge, and it's a lot of labels. Unfortunately I couldn't get the RichTextBox to tell me the layout of the text - I'm fine with doing the actual rendering by hand, as long as I know where to draw what. This is the first question: How can I get the properly layouted metrics of the rich text out of a RichTextBox? Or is there any way to convert the rich text to a vector graphics format that can be easily drawn manually? I know about NRTFTree which can be used to parse and manipulate RichText. The documentation is bad (actually I don't know, it's Spanish), but I think I can get it to work. As far as I understood, it won't provide layouting as well. Because of this, I think I'll have to write a custom edit control (remember, it's basically just one or two line labels with basic RTF formatting, not a full-fledged edit control - more like editing a textbox in PowerPoint) and write custom text layout logic that used PDFSharp rather than System.Drawing for drawing. Is there any existing, even if partial, solution available, either for the editing or for doing the layout manually (or both)? Or is there an entirely different approach I'm just not seeing? Bonus points if exporting the label texts as RTF into a CSV file, and then importing in Excel retains the formatting. For the editing part, I need it to work in Windows Forms. Other than that it's not Windows-Forms-related, I think.

Read the article

How to decrypt a string in C# that was encrypted in Delphi

- by Simon Linder

Hi all, we have a project written in Delphi that we want to convert to C#. Problem is that we have some passwords and settings that are encrypted and written into the registry. When we need a specified password we get it from the registry and decrypt it so we can use it. For the conversion into C# we have to do it the same way so that the application can also be used by users that have the old version and want to upgrade it. Here is the code we use to encrypt/decrypt strings in Delphi: unit uCrypt; interface function EncryptString(strPlaintext, strPassword : String) : String; function DecryptString(strEncryptedText, strPassword : String) : String; implementation uses DCPcrypt2, DCPblockciphers, DCPdes, DCPmd5; const CRYPT_KEY = '1q2w3e4r5t6z7u8'; function EncryptString(strPlaintext) : String; var cipher : TDCP_3des; strEncryptedText : String; begin if strPlaintext <> '' then begin try cipher := TDCP_3des.Create(nil); try cipher.InitStr(CRYPT_KEY, TDCP_md5); strEncryptedText := cipher.EncryptString(strPlaintext); finally cipher.Free; end; except strEncryptedText := ''; end; end; Result := strEncryptedText; end; function DecryptString(strEncryptedText) : String; var cipher : TDCP_3des; strDecryptedText : String; begin if strEncryptedText <> '' then begin try cipher := TDCP_3des.Create(nil); try cipher.InitStr(CRYPT_KEY, TDCP_md5); strDecryptedText := cipher.DecryptString(strEncryptedText); finally cipher.Free; end; except strDecryptedText := ''; end; end; Result := strDecryptedText; end; end. So for example when we want to encrypt the string asdf1234 we get the result WcOb/iKo4g8=. We now want to decrypt that string in C#. Here is what we tried to do: public static void Main(string[] args) { string Encrypted = "WcOb/iKo4g8="; string Password = "1q2w3e4r5t6z7u8"; string DecryptedString = DecryptString(Encrypted, Password); } public static string DecryptString(string Message, string Passphrase) { byte[] Results; System.Text.UTF8Encoding UTF8 = new System.Text.UTF8Encoding(); // Step 1. We hash the passphrase using MD5 // We use the MD5 hash generator as the result is a 128 bit byte array // which is a valid length for the TripleDES encoder we use below MD5CryptoServiceProvider HashProvider = new MD5CryptoServiceProvider(); byte[] TDESKey = HashProvider.ComputeHash(UTF8.GetBytes(Passphrase)); // Step 2. Create a new TripleDESCryptoServiceProvider object TripleDESCryptoServiceProvider TDESAlgorithm = new TripleDESCryptoServiceProvider(); // Step 3. Setup the decoder TDESAlgorithm.Key = TDESKey; TDESAlgorithm.Mode = CipherMode.ECB; TDESAlgorithm.Padding = PaddingMode.None; // Step 4. Convert the input string to a byte[] byte[] DataToDecrypt = Convert.FromBase64String(Message); // Step 5. Attempt to decrypt the string try { ICryptoTransform Decryptor = TDESAlgorithm.CreateDecryptor(); Results = Decryptor.TransformFinalBlock(DataToDecrypt, 0, DataToDecrypt.Length); } finally { // Clear the TripleDes and Hashprovider services of any sensitive information TDESAlgorithm.Clear(); HashProvider.Clear(); } // Step 6. Return the decrypted string in UTF8 format return UTF8.GetString(Results); } Well the result differs from the expected result. After we call DecryptString() we expect to get asdf1234but we get something else. Does anyone have an idea of how to decrypt that correctly? Thanks in advance Simon

Read the article

Is there a C pre-processor which eliminates #ifdef blocks based on values defined/undefined?

- by Jonathan Leffler

Original Question What I'd like is not a standard C pre-processor, but a variation on it which would accept from somewhere - probably the command line via -DNAME1 and -UNAME2 options - a specification of which macros are defined, and would then eliminate dead code. It may be easier to understand what I'm after with some examples: #ifdef NAME1 #define ALBUQUERQUE "ambidextrous" #else #define PHANTASMAGORIA "ghostly" #endif If the command were run with '-DNAME1', the output would be: #define ALBUQUERQUE "ambidextrous" If the command were run with '-UNAME1', the output would be: #define PHANTASMAGORIA "ghostly" If the command were run with neither option, the output would be the same as the input. This is a simple case - I'd be hoping that the code could handle more complex cases too. To illustrate with a real-world but still simple example: #ifdef USE_VOID #ifdef PLATFORM1 #define VOID void #else #undef VOID typedef void VOID; #endif /* PLATFORM1 */ typedef void * VOIDPTR; #else typedef mint VOID; typedef char * VOIDPTR; #endif /* USE_VOID */ I'd like to run the command with -DUSE_VOID -UPLATFORM1 and get the output: #undef VOID typedef void VOID; typedef void * VOIDPTR; Another example: #ifndef DOUBLEPAD #if (defined NT) || (defined OLDUNIX) #define DOUBLEPAD 8 #else #define DOUBLEPAD 0 #endif /* NT */ #endif /* !DOUBLEPAD */ Ideally, I'd like to run with -UOLDUNIX and get the output: #ifndef DOUBLEPAD #if (defined NT) #define DOUBLEPAD 8 #else #define DOUBLEPAD 0 #endif /* NT */ #endif /* !DOUBLEPAD */ This may be pushing my luck! Motivation: large, ancient code base with lots of conditional code. Many of the conditions no longer apply - the OLDUNIX platform, for example, is no longer made and no longer supported, so there is no need to have references to it in the code. Other conditions are always true. For example, features are added with conditional compilation so that a single version of the code can be used for both older versions of the software where the feature is not available and newer versions where it is available (more or less). Eventually, the old versions without the feature are no longer supported - everything uses the feature - so the condition on whether the feature is present or not should be removed, and the 'when feature is absent' code should be removed too. I'd like to have a tool to do the job automatically because it will be faster and more reliable than doing it manually (which is rather critical when the code base includes 21,500 source files). (A really clever version of the tool might read #include'd files to determine whether the control macros - those specified by -D or -U on the command line - are defined in those files. I'm not sure whether that's truly helpful except as a backup diagnostic. Whatever else it does, though, the pseudo-pre-processor must not expand macros or include files verbatim. The output must be source similar to, but usually simpler than, the input code.) Status Report (one year later) After a year of use, I am very happy with 'sunifdef' recommended by the selected answer. It hasn't made a mistake yet, and I don't expect it to. The only quibble I have with it is stylistic. Given an input such as: #if (defined(A) && defined(B)) || defined(C) || (defined(D) && defined(E)) and run with '-UC' (C is never defined), the output is: #if defined(A) && defined(B) || defined(D) && defined(E) This is technically correct because '&&' binds tighter than '||', but it is an open invitation to confusion. I would much prefer it to include parentheses around the sets of '&&' conditions, as in the original: #if (defined(A) && defined(B)) || (defined(D) && defined(E)) However, given the obscurity of some of the code I have to work with, for that to be the biggest nit-pick is a strong compliment; it is valuable tool to me. The New Kid on the Block Having checked the URL for inclusion in the information above, I see that (as predicted) there is an new program called Coan that is the successor to 'sunifdef'. It is available on SourceForge and has been since January 2010. I'll be checking it out...further reports later this year, or maybe next year, or sometime, or never.

Read the article

Encoded nsstring becomes invalid, "normal" nsstring remains

- by shoreline

I'm running into a problem with a string that contains encoded characters. Specifically, if the string has encoded characters it eventually becomes invalid while a "normal" string will not. in the .h file: @interface DirViewController : TTThumbsViewController <UIActionSheetDelegate,UINavigationControllerDelegate,UIImagePickerControllerDelegate> { NSString *sourceFolder; NSString *encodedSourceFolder; } @property (nonatomic, retain) NSString *sourceFolder; @property (nonatomic, retain) NSString *encodedSourceFolder; in the .m file: - (id)initWithFolder:(NSString*)folder query:(NSDictionary*)query { if (self = [super init]) { sourceFolder = folder; } return self; } Up to now everything seems to run as expected. In viewDidLoad I have the following: sourceFolderCopy = [self urlEncodeValue:(sourceFolder)]; //I also have this button, which I'll refer to later: UIBarButtonItem *importButton = [[UIBarButtonItem alloc] initWithTitle:@"Import/Export" style:UIBarButtonItemStyleBordered target:self action:@selector(importFiles:)]; self.navigationItem.rightBarButtonItem = importButton; Which uses the following method to encode the string (if it has characters I want encoded): - (NSString *)urlEncodeValue:(NSString *)str { NSString *result = (NSString *) CFURLCreateStringByAddingPercentEscapes (kCFAllocatorDefault, (CFStringRef)str, NULL, CFSTR(":/?#[]@!$&’()*+,;="), kCFStringEncodingUTF8); return [result autorelease]; } If I NSLog result, I get the expected values. If the string has characters like a white space, I get a string with encoding. If the string doesn't have any characters that need to be encoded, it just gives me the original string. I have a button on the nav bar which begins an image import process by opening an action sheet. Once the method for the action sheet starts, my string is invalid - but only if it contains encoded characters. If it is just a "normal" string, everything is fine and acts as expected. Am I off on my encoding? At first I thought it might be a memory problem but I can't figure out why that would affect only encoded strings. Here's where the action sheet is defined (and the first place I can see the encoded string becoming invalid) the NSLog statements are where it crashes: - (IBAction)importFiles:(id)sender { NSLog(@"logging encodedSF from import files:"); NSLog(@"%@",encodedSourceFolder);//crashes right here NSLog(@"%@",sourceFolder); if (shouldNavigate == NO) { NSString *msg = nil; msg = @"It is not possible to import or export images while in image selection mode."; UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"Unable to Import/Export" message:msg delegate:self cancelButtonTitle:@"OK" otherButtonTitles:nil]; [alert show]; [alert release]; [msg release]; } else{ UIActionSheet *actionSheet = [[UIActionSheet alloc] initWithTitle:@"What would you like to do?" delegate:self cancelButtonTitle:@"Cancel" destructiveButtonTitle:nil otherButtonTitles:@"Import Photos (Picker)", @"Export Photos", nil, nil]; [actionSheet showInView:self.view]; [actionSheet release]; } } I don't get any crash errors going to the console. By using breakpoints I was able to see that the encodedSourceFolder is invalid in the action sheet method.

Read the article

ADO.NET (WCF) Data Services Query Interceptor Hangs IIS

- by PreMagination

I have an ADO.NET Data Service that's supposed to provide read-only access to a somewhat complex database. Logically I have table-per-type (TPT) inheritance in my data model but the EDM doesn't implement inheritance. (Limitation of EF and navigation properties on derived types. STILL not fixed in EF4!) I can query my EDM directly (using a separate project) using a copy of the query I'm trying to run against the web service, results are returned within 10 seconds. Disabling the query interceptors I'm able to make the same query against the web service, results are returned similarly quickly. I can enable some of the query interceptors and the results are returned slowly, up to a minute or so later. Alternatively, I can enable all the query interceptors, expand less of the properties on the main object I'm querying, and results are returned in a similar period of time. (I've increased some of the timeout periods) Up til this point Sql Profiler indicates the slow-down is the database. (That's a post for a different day) But when I enable all my query interceptors and expand all the properties I'd like to have the IIS worker process pegs the CPU for 20 minutes and a query is never even made against the database. This implies to me that yes, my implementation probably sucks but regardless the Data Services "tier" is having an issue it shouldn't. WCF tracing didn't reveal anything interesting to my untrained eye. Details: Data model: Agent-Person-Student Student has a collection of referrals Students and referrals are private, queries against the web service should only return "your" students and referrals. This means Person and Agent need to be filtered too. Other entities (Agent-Organization-School) can be accessed by anyone who has authenticated. The existing security model is poorly suited to perform this type of filtering for this type of data access, the query interceptors are complicated and cause EF to generate some entertaining sql queries. Sample Interceptor [QueryInterceptor("Agents")] public Expression<Func<Agent, Boolean>> OnQueryAgents() { //Agent is a Person(1), Educator(2), Student(3), or Other Person(13); allow if scope permissions exist return ag => (ag.AgentType.AgentTypeId == 1 || ag.AgentType.AgentTypeId == 2 || ag.AgentType.AgentTypeId == 3 || ag.AgentType.AgentTypeId == 13) && ag.Person.OrganizationPersons.Count<OrganizationPerson>(op => op.Organization.ScopePermissions.Any<ScopePermission> (p => p.ApplicationRoleAccount.Account.UserName == HttpContext.Current.User.Identity.Name && p.ApplicationRoleAccount.Application.ApplicationId == 124) || op.Organization.HierarchyDescendents.Any<OrganizationsHierarchy>(oh => oh.AncestorOrganization.ScopePermissions.Any<ScopePermission> (p => p.ApplicationRoleAccount.Account.UserName == HttpContext.Current.User.Identity.Name && p.ApplicationRoleAccount.Application.ApplicationId == 124))) > 0; } The query interceptors for Person, Student, Referral are all very similar, ie they traverse multiple same/similar tables to look for ScopePermissions as above. Sample Query var referrals = (from r in service.Referrals .Expand("Organization/ParentOrganization") .Expand("Educator/Person/Agent") .Expand("Student/Person/Agent") .Expand("Student") .Expand("Grade") .Expand("ProblemBehavior") .Expand("Location") .Expand("Motivation") .Expand("AdminDecision") .Expand("OthersInvolved") where r.DateCreated >= coupledays && r.DateDeleted == null select r); Any suggestions or tips would be greatly associated, for fixing my current implementation or in developing a new one, with the caveat that the database can't be changed and that ultimately I need to expose a large portion of the database via a web service that limits data access to the data authorized for, for the purpose of data integration with multiple outside parties. THANK YOU!!!

Read the article

Calling Grep inside Java gives incorrect results when calling grep in shell gives correct results.

- by futureelite7

I've got a problem where calling grep from inside java gives incorrect results, as compared to the results from calling grep on the same file in the shell. My grep command (called both in Java and in bash. I escaped the slash in Java accordingly): /bin/grep -vP --regexp='^[0-9]+\t.*' /usr/local/apache-tomcat-6.0.18/work/Catalina/localhost/saccitic/237482319867147879_1271411421 The command is supposed to match and discard strings like these: 85295371616 Hi Mr Lee, please be informed that... My input file is this: 85aaa234567 Hi Ms Chan, please be informed that... 85292vx5678 Hi Mrs Ng, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85aaa234567 Hi Ms Chan, please be informed that... 85292vx5678 Hi Mrs Ng, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 8~!95371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 852&^*&1616 Hi Mr Lee, please be informed that... 8529537Ax16 Hi Mr Lee, please be informed that... 85====ppq16 Hi Mr Lee, please be informed that... 85291234783 a3283784428349247233834728482984723333 85219299222 The commands works when I call it from inside bash (Results below): 85aaa234567 Hi Ms Chan, please be informed that... 85292vx5678 Hi Mrs Ng, please be informed that... 85aaa234567 Hi Ms Chan, please be informed that... 85292vx5678 Hi Mrs Ng, please be informed that... 8~!95371616 Hi Mr Lee, please be informed that... 852&^*&1616 Hi Mr Lee, please be informed that... 8529537Ax16 Hi Mr Lee, please be informed that... 85====ppq16 Hi Mr Lee, please be informed that... 85219299222 However, when I call grep again inside java, I get the entire file (Results below): 85aaa234567 Hi Ms Chan, please be informed that... 85292vx5678 Hi Mrs Ng, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85aaa234567 Hi Ms Chan, please be informed that... 85292vx5678 Hi Mrs Ng, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 8~!95371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 852&^*&1616 Hi Mr Lee, please be informed that... 8529537Ax16 Hi Mr Lee, please be informed that... 85====ppq16 Hi Mr Lee, please be informed that... 85291234783 a3283784428349247233834728482984723333 85219299222 What could be the problem that will cause the grep called by Java to return incorrect results? I tried passing local information via the environment string array in runtime.exec, but nothing seems to change. Am I passing in the locale information incorrectly, or is the problem something else entirely? private String[] localeArray = new String[] { "LANG=", "LC_COLLATE=C", "LC_CTYPE=UTF-8", "LC_MESSAGES=C", "LC_MONETARY=C", "LC_NUMERIC=C", "LC_TIME=C", "LC_ALL=" };

Read the article

Calling Grep inside Java gives incorrect results while calling grep in shell gives correct results.

- by futureelite7

I've got a problem where calling grep from inside java gives incorrect results, as compared to the results from calling grep on the same file in the shell. My grep command (called both in Java and in bash. I escaped the slash in Java accordingly): /bin/grep -vP --regexp='^[0-9]+\t.*' /usr/local/apache-tomcat-6.0.18/work/Catalina/localhost/saccitic/237482319867147879_1271411421 Java Code: String filepath = "/path/to/file"; String options = "P"; String grepparams = "^[0-9]+\\t.*"; String greppath = "/bin/"; String[] localeArray = new String[] { "LANG=", "LC_COLLATE=C", "LC_CTYPE=UTF-8", "LC_MESSAGES=C", "LC_MONETARY=C", "LC_NUMERIC=C", "LC_TIME=C", "LC_ALL=" }; options = "v"+options; //Assign optional params if (options.contains("P")) { grepparams = "\'"+grepparams+"\'"; //Quote the regex expression if -P flag is used } else { options = "E"+options; //equivalent to calling egrep } proc = sysRuntime.exec(greppath+"/grep -"+options+" --regexp="+grepparams+" "+filepath, localeArray); System.out.println(greppath+"/grep -"+options+" --regexp="+grepparams+" "+filepath); inStream = proc.getInputStream(); The command is supposed to match and discard strings like these: 85295371616 Hi Mr Lee, please be informed that... My input file is this: 85aaa234567 Hi Ms Chan, please be informed that... 85292vx5678 Hi Mrs Ng, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85aaa234567 Hi Ms Chan, please be informed that... 85292vx5678 Hi Mrs Ng, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 8~!95371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 852&^*&1616 Hi Mr Lee, please be informed that... 8529537Ax16 Hi Mr Lee, please be informed that... 85====ppq16 Hi Mr Lee, please be informed that... 85291234783 a3283784428349247233834728482984723333 85219299222 The commands works when I call it from inside bash (Results below): 85aaa234567 Hi Ms Chan, please be informed that... 85292vx5678 Hi Mrs Ng, please be informed that... 85aaa234567 Hi Ms Chan, please be informed that... 85292vx5678 Hi Mrs Ng, please be informed that... 8~!95371616 Hi Mr Lee, please be informed that... 852&^*&1616 Hi Mr Lee, please be informed that... 8529537Ax16 Hi Mr Lee, please be informed that... 85====ppq16 Hi Mr Lee, please be informed that... 85219299222 However, when I call grep again inside java, I get the entire file (Results below): 85aaa234567 Hi Ms Chan, please be informed that... 85292vx5678 Hi Mrs Ng, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85aaa234567 Hi Ms Chan, please be informed that... 85292vx5678 Hi Mrs Ng, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 8~!95371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 852&^*&1616 Hi Mr Lee, please be informed that... 8529537Ax16 Hi Mr Lee, please be informed that... 85====ppq16 Hi Mr Lee, please be informed that... 85291234783 a3283784428349247233834728482984723333 85219299222 What could be the problem that will cause the grep called by Java to return incorrect results? I tried passing local information via the environment string array in runtime.exec, but nothing seems to change. Am I passing in the locale information incorrectly, or is the problem something else entirely?

Read the article

Securing Web Service communication with SSL using CXF

- by reef

Hi all, I am trying to secure communications via SSL/TLS for one of our Web Service using CXF 2.2.5. I am wondering how to update client and server Spring configuration file to activate this feature. I found some information on CXF's website (CXF Wiki) for the client configuration, here is the given example: <http:conduit name="{http://apache.org/hello_world}HelloWorld.http-conduit"> <http:tlsClientParameters> <sec:keyManagers keyPassword="password"> <sec:keyStore type="JKS" password="password" file="src/test/java/org/apache/cxf/systest/http/resources/Morpit.jks"/> </sec:keyManagers> <sec:trustManagers> <sec:keyStore type="JKS" password="password" file="src/test/java/org/apache/cxf/systest/http/resources/Truststore.jks"/> </sec:trustManagers> <sec:cipherSuitesFilter>  <sec:include>.*_EXPORT_.*</sec:include> <sec:include>.*_EXPORT1024_.*</sec:include> <sec:include>.*_WITH_DES_.*</sec:include> <sec:include>.*_WITH_NULL_.*</sec:include> <sec:exclude>.*_DH_anon_.*</sec:exclude> </sec:cipherSuitesFilter> </http:tlsClientParameters> <http:authorization> <sec:UserName>Betty</sec:UserName> <sec:Password>password</sec:Password> </http:authorization> <http:client AutoRedirect="true" Connection="Keep-Alive"/> </http:conduit> Concerning this configuration, the Concerning the server side configuration I am unable to launch the server properly, here is the configuration I have: <http:destination name="{urn:ihe:iti:xds-b:2007}DocumentRepository_Port_Soap12.http-destination"> </http:destination> <httpj:engine-factory> <httpj:engine port="9043"> <httpj:tlsServerParameters> <sec:keyManagers keyPassword="changeit"> <sec:keyStore type="JKS" password="changeit" file="security/keystore.jks" /> </sec:keyManagers> <sec:trustManagers> <sec:keyStore type="JKS" password="changeit" file="security/cacerts.jks" /> </sec:trustManagers> <sec:cipherSuitesFilter>  <sec:include>.*_EXPORT_.*</sec:include> <sec:include>.*_EXPORT1024_.*</sec:include> <sec:include>.*_WITH_DES_.*</sec:include> <sec:include>.*_WITH_NULL_.*</sec:include> <sec:exclude>.*_DH_anon_.*</sec:exclude> </sec:cipherSuitesFilter> <sec:clientAuthentication want="true" required="true" /> </httpj:tlsServerParameters> </httpj:engine> </httpj:engine-factory> But when I run my application server (JOnas) with this configuration I have the following error message: Line 20 in XML document from ServletContext resource [/WEB-INF/beans.xml] is invalid; nested exception is org.xml.sax.SAXParseException: cvc-complex-type.2.4.c: The matching wildcard is strict, but no declaration can be found for element 'httpj:engine-factory'. Do you guys know how to solve this issue? Thanks in advance,

Read the article

How do I use Sketchflow sample data for a ListBoxItem Template at design time?

- by Boris Nikolaevich

I am using Expression Blend 4 and Visual Studio 2010 to create a Sketchflow prototype. I have a Sample Data collection and a ListBox that is bound to it. This displays as I would expect both at design time and at run time. However, the ListBoxItem template it just complex enough that I wanted to pull it out into its own XAML file. Even though the items still render as expected in the main ListBox where the template is used, when I open the template itself, all of the databound controls are empty. If I add a DataContext to the template, I can see and work with the populated objects while in the template, but then that local DataContext overrides the DataContext set on the listbox. A bit of code will illustrate. Start by creating a Sketchflow project (I am using Silverlight, but it should work the same for WPF), then add a project data source called SampleDataSource. Add a collection called ListData, with a single String property called Title. Here is the (scaled down) code for the main Sketchflow screen, which we'll call Main.xaml: <UserControl xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:local="clr-namespace:DemoScreens" mc:Ignorable="d" x:Class="DemoScreens.Main" Width="800" Height="600"> <UserControl.Resources> <ResourceDictionary> <ResourceDictionary.MergedDictionaries> <ResourceDictionary Source="ProjectDataSources.xaml"/> </ResourceDictionary.MergedDictionaries> <DataTemplate x:Key="ListBoxItemTemplate"> <local:DemoListBoxItemTemplate d:IsPrototypingComposition="True" Margin="0,0,5,0" Width="748"/> </DataTemplate> </ResourceDictionary> </UserControl.Resources> <Grid x:Name="LayoutRoot" Background="#5c87b2" DataContext="{Binding Source={StaticResource SampleDataSource}}"> <ListBox Background="White" x:Name="DemoList" Style="{StaticResource ListBox-Sketch}" Margin="20,100,20,20" ItemTemplate="{StaticResource ListBoxItemTemplate}" ItemsSource="{Binding ListData}" ScrollViewer.HorizontalScrollBarVisibility="Disabled"/> </Grid> </UserControl> You can see that it references the DemoListBoxItemTemplate, which is defined in its own DemoListBoxItemTemplate.xaml: <UserControl xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:local="clr-namespace:DemoScreens" mc:Ignorable="d" x:Class="DemoScreens.DemoListBoxItemTemplate"> <Grid x:Name="LayoutRoot"> <TextBlock Text="{Binding Title}" Style="{StaticResource BasicTextBlock-Sketch}" Width="150"/> </Grid> </UserControl> Obviously, this is way simpler than my actual listbox, but it should be enough to illustrate my problem. When you open Main.xaml in the Expression designer, the list box is populated with sample data. But when you open DemoListBoxItemTemplate.xaml, there is no data context and therefore no data to display—which makes it more difficult to identify controls visually. How can I have sample data displayed when I am working with the template, while still allowing the larger set of sample data to be used for the ListBox itself?

Read the article

iPhone XMLParser help

- by Brodie4598

I am needing to parse an XML file for my app and I dont have any clue how to do it. I went through one XMLParser tutorial, and it worked fine but the XML file in the tutorial was very simple and my XML file is quite a bit more complex. here is a snippet of the xml file: <?xml version="1.0" encoding="UTF-8"?> <digital_tpp cycle="1003" from_edate="0901Z 03/11/10" to_edate="0901Z 04/08/10"> <state_code ID="AK" state_fullname="Alaska"> <city_name ID="ADAK ISLAND" volume="AK-1"> <airport_name ID="ADAK" military="N" apt_ident="ADK" icao_ident="PADK" alnum="1244"> <record> <chartseq>10100</chartseq> <chart_code>MIN</chart_code> <chart_name>TAKE-OFF MINIMUMS</chart_name> <useraction></useraction> <pdf_name>AKTO.PDF</pdf_name> <cn_flg>N</cn_flg> <cnsection></cnsection> <cnpage></cnpage> <bvsection>C</bvsection> <bvpage></bvpage> <procuid></procuid> <two_colored>N</two_colored> <civil> </civil> <faanfd15></faanfd15> <faanfd18></faanfd18> <copter></copter> </record> <record> <chartseq>10200</chartseq> <chart_code>MIN</chart_code> <chart_name>ALTERNATE MINIMUMS</chart_name> <useraction></useraction> <pdf_name>AKALT.PDF</pdf_name> <cn_flg>N</cn_flg> <cnsection></cnsection> <cnpage></cnpage> <bvsection>E</bvsection> <bvpage></bvpage> <procuid></procuid> <two_colored>N</two_colored> <civil> </civil> <faanfd15></faanfd15> <faanfd18></faanfd18> <copter></copter> </record> </airport_name> </city_name> </state_code> </digital_tpp> What I'm needing to do is search the XML file for the <...icao_ident> that the user specifies, then create a dictionary containing the <pdf_name> and <chart_name> for each <record> . I will then create a UI that displays the pdf files. Can someone direct me to a good tutorial or explanation of how XML parser works? Or if I'm going about this the wrong way I'd be open to suggestions too. (the XML file is about 8MB)

Read the article

MySQL is hogging my server resources

- by Reacen

Does anyone have any idea of what can cause this weird behaviour and how I go about fixing it? This is all coming from MySQL only (both RAM and CPU usage), for about 10 minutes after I reboot my Java game server (that has a pool of 256 connections). There are not that many queries and I think it may be more of a MySQL misconfiguration problem. My server: 3.20 GHz * 6 core / 24 GB RAM / 64 bit Windows Server 2003. My game server: Java server, with 256 MySQL connections pool (MyISAM engine), about 500,000 accounts, and 9 million rows of game items in database and about 3,000 players are connected. After about 15 minutes of the game server reboot, the server resumes its stability and CPU usage drop down to 1% ~ 5% and memory to 6 GB. Here is a copy of my MySQL configuration. Also, any advice about my MySQL configuration will be appreciated. I really set it up almost at random. # Example MySQL config file for very large systems. # # This is for a large system with memory of 1G-2G where the system runs mainly # MySQL. # # You can copy this file to # /etc/my.cnf to set global options, # mysql-data-dir/my.cnf to set server-specific options (in this # installation this directory is C:\mysql\data) or # ~/.my.cnf to set user-specific options. # # In this file, you can use all long options that a program supports. # If you want to know which options a program supports, run the program # with the "--help" option. # The following options will be passed to all MySQL clients [client] #password = your_password port = 3306 socket = /tmp/mysql.sock # Here follows entries for some specific programs # The MySQL server [mysqld] #log=c:\mysql.log port = 3306 socket = /tmp/mysql.sock skip-locking key_buffer_size = 2572M max_allowed_packet = 64M table_open_cache = 512 sort_buffer_size = 128M read_buffer_size = 128M read_rnd_buffer_size = 128M myisam_sort_buffer_size = 500M thread_cache_size = 32 query_cache_size = 1948M # Try number of CPU's*2 for thread_concurrency thread_concurrency = 12 max_connections = 5000 # Don't listen on a TCP/IP port at all. This can be a security enhancement, # if all processes that need to connect to mysqld run on the same host. # All interaction with mysqld must be made via Unix sockets or named pipes. # Note that using this option without enabling named pipes on Windows # (via the "enable-named-pipe" option) will render mysqld useless! # #skip-networking # Replication Master Server (default) # binary logging is required for replication log-bin=mysql-bin # required unique id between 1 and 2^32 - 1 # defaults to 1 if master-host is not set # but will not function as a master if omitted server-id = 1 # Replication Slave (comment out master section to use this) # # To configure this host as a replication slave, you can choose between # two methods : # # 1) Use the CHANGE MASTER TO command (fully described in our manual) - # the syntax is: # # CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>, # MASTER_USER=<user>, MASTER_PASSWORD=<password> ; # # where you replace <host>, <user>, <password> by quoted strings and # <port> by the master's port number (3306 by default). # # Example: # # CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306, # MASTER_USER='joe', MASTER_PASSWORD='secret'; # # OR # # 2) Set the variables below. However, in case you choose this method, then # start replication for the first time (even unsuccessfully, for example # if you mistyped the password in master-password and the slave fails to # connect), the slave will create a master.info file, and any later # change in this file to the variables' values below will be ignored and # overridden by the content of the master.info file, unless you shutdown # the slave server, delete master.info and restart the slaver server. # For that reason, you may want to leave the lines below untouched # (commented) and instead use CHANGE MASTER TO (see above) # # required unique id between 2 and 2^32 - 1 # (and different from the master) # defaults to 2 if master-host is set # but will not function as a slave if omitted #server-id = 2 # # The replication master for this slave - required #master-host = <hostname> # # The username the slave will use for authentication when connecting # to the master - required #master-user = <username> # # The password the slave will authenticate with when connecting to # the master - required #master-password = <password> # # The port the master is listening on. # optional - defaults to 3306 #master-port = <port> # # binary logging - not required for slaves, but recommended #log-bin=mysql-bin # # binary logging format - mixed recommended #binlog_format=mixed # Point the following paths to different dedicated disks #tmpdir = /tmp/ #log-update = /path-to-dedicated-directory/hostname # Uncomment the following if you are using InnoDB tables #innodb_data_home_dir = C:\mysql\data/ #innodb_data_file_path = ibdata1:2000M;ibdata2:10M:autoextend #innodb_log_group_home_dir = C:\mysql\data/ # You can set .._buffer_pool_size up to 50 - 80 % # of RAM but beware of setting memory usage too high #innodb_buffer_pool_size = 384M #innodb_additional_mem_pool_size = 20M # Set .._log_file_size to 25 % of buffer pool size #innodb_log_file_size = 100M #innodb_log_buffer_size = 8M #innodb_flush_log_at_trx_commit = 1 #innodb_lock_wait_timeout = 50 [mysqldump] quick max_allowed_packet = 64M [mysql] no-auto-rehash # Remove the next comment character if you are not familiar with SQL #safe-updates [myisamchk] key_buffer_size = 256M sort_buffer_size = 256M read_buffer = 8M write_buffer = 8M [mysqlhotcopy] interactive-timeout

Read the article

Architecture for a business objects / database access layer

- by gregmac

For various reasons, we are writing a new business objects/data storage library. One of the requirements of this layer is to separate the logic of the business rules, and the actual data storage layer. It is possible to have multiple data storage layers that implement access to the same object - for example, a main "database" data storage source that implements most objects, and another "ldap" source that implements a User object. In this scenario, User can optionally come from an LDAP source, perhaps with slightly different functionality (eg, not possible to save/update the User object), but otherwise it is used by the application the same way. Another data storage type might be a web service, or an external database. There are two main ways we are looking at implementing this, and me and a co-worker disagree on a fundamental level which is correct. I'd like some advice on which one is the best to use. I'll try to keep my descriptions of each as neutral as possible, as I'm looking for some objective view points here. Business objects are base classes, and data storage objects inherit business objects. Client code deals with data storage objects. In this case, common business rules are inherited by each data storage object, and it is the data storage objects that are directly used by the client code. This has the implication that client code determines which data storage method to use for a given object, because it has to explicitly declare an instance to that type of object. Client code needs to explicitly know connection information for each data storage type it is using. If a data storage layer implements different functionality for a given object, client code explicitly knows about it at compile time because the object looks different. If the data storage method is changed, client code has to be updated. Business objects encapsulate data storage objects. In this case, business objects are directly used by client application. Client application passes along base connection information to business layer. Decision about which data storage method a given object uses is made by business object code. Connection information would be a chunk of data taken from a config file (client app does not really know/care about details of it), which may be a single connection string for a database, or several pieces connection strings for various data storage types. Additional data storage connection types could also be read from another spot - eg, a configuration table in a database that specifies URLs to various web services. The benefit here is that if a new data storage method is added to an existing object, a configuration setting can be set at runtime to determine which method to use, and it is completely transparent to the client applications. Client apps do not need to be modified if data storage method for a given object changes. Business objects are base classes, data source objects inherit from business objects. Client code deals primarily with base classes. This is similar to the first method, but client code declares variables of the base business object types, and Load()/Create()/etc static methods on the business objects return the appropriate data source-typed objects. The architecture of this solution is similar to the first method, but the main difference is the decision about which data storage object to use for a given business object is made by the business layer, not the client code. I know there are already existing ORM libraries that provide some of this functionality, but please discount those for now (there is the possibility that a data storage layer is implemented with one of these ORM libraries) - also note I'm deliberately not telling you what language is being used here, other than that it is strongly typed. I'm looking for some general advice here on which method is better to use (or feel free to suggest something else), and why.

Read the article

Visual C++ 2010 Winform Errors C2238, C2059, C1075.

- by tracelez

It errors when I try compile. I cut the code out of the program and the program works and complies correctly. Not sure why it doesn't like this. This part of the code does single digit math with numeric strings that are converted into a char arrays. ** Error 2 error C2238: unexpected token(s) preceding ';' C:\Users\Alpha\documents\visual studio 2010\Projects\Win32 Form c++\Win32 Form c++\Win32 Form c++.cpp 10 1 Win32 Form c++ ** Error 1 error C2059: syntax error : 'namespace' C:\Users\Alpha\documents\visual studio 2010\Projects\Win32 Form c++\Win32 Form c++\Win32 Form c++.cpp 10 1 Win32 Form c++ ** Error 3 error C1075: end of file found before the left brace '{' at 'c:\users\alpha\documents\visual studio 2010\projects\win32 form c++\win32 form c++\Form1.h(40)' was matched C:\Users\Alpha\documents\visual studio 2010\Projects\Win32 Form c++\Win32 Form c++\Win32 Form c++.cpp 23 1 Win32 Form c++ ////// ////// // chX[] and chY[] are char arrays from functional part of program std::reverse( chX, &chX[ strlen( chX ) ] ); std::reverse( chY, &chY[ strlen( chY ) ] ); // makes sure x is larger or equal to y...makes looping logic easier if (strlen(chX) < strlen(chY)) { char *chZ = chX; chX = chY; chY = chZ; } //Variables for this part of the program char chX2; char chY2; std::string strSum; int sum = 0; bool carryth1 = false; int x=0; int y=0; for (int i = 0; i <= (strlen(chX)-1); i++) { if (i <= strlen(chY)-1) { chX2= chX[i]; chY2= chY[i]; x = atoi(chX2); y = atoi(chY2); //x = atoi(chX[i]); sum = x+y+(int)carryth1; carryth1 = false; if (sum > 9) { if(i == 0) { sum -=10; strSum = itoa(sum); carryth1 = true; } else { sum -=10; strSum += itoa(sum); carryth1 = true; } } else { if(i == 0) { strSum = itoa(sum); } else { strSum += itoa(sum); } } else { y = 0; chX2= chX[i]; x = atoi(chX2); sum = x+y+(int)carryth1; if((i == strlen(chX)-1)&& (carryth1 == true) && (x == 9)) { strSum += "10"; } else { strSum = itoa(sum); } } std::reverse( strSum, &strSum[ strlen( strSum ) ] ); //Creates new string for txtDisplay this simplifies conversions String^ strDisplay = "X is " + gcnew String((strX1.c_str())) + " Y is " +gcnew String((strY1.c_str())) + " \r\n " ; strDisplay += "The sum of the X + Y = "; txtDisplay->Text = gcnew String((strSum.c_str())) ;

Read the article

Advance way of using UIView convertRect method to detect CGRectIntersectsRect multiple times

- by Chris

I recently asked a question regarding collision detection within subviews, with a perfect answer. I've come to the last point in implementing the collision on my application but I've come across a new issue. Using convertRect was fine getting the CGRect from the subView. I needed it to be a little more complex as it wasn't exactly rectangles that needed to be detected. on XCode I created an abstract class called TileViewController. Amongst other properties it has a IBOutlet UIView *detectionView; I now have multiple classes that inherit from TileViewController, and each class there are multiple views nested inside the detectionView which I have created using Interface Builder. The idea is an object could be a certain shape or size, I've programatically placed these 'tiled' detection points bottom center of each object. A user can select an item and interactive with it, in this circumstance move it around. Here is my touchesMoved method -(void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event{ UITouch *touch = [[event allTouches] anyObject]; CGPoint location = [touch locationInView:touch.view]; interactiveItem.center = location; // The ViewController the user has chosen to interact with interactiveView.view.center = location; // checks if the user has selected an item to interact with if (interactiveItem) { // First get check there is more then 1 item in the collection NSUInteger assetCount = [itemViewCollection count]; //NSMutableArray that holds the ViewControllers int detectionCount = 0; // To count how many times a CGRectIntersectsRect occured UIView *parentView = self.view; // if there is more then 1 item begin collision detection if (assetCount > 1) { for (TileViewController *viewController in itemViewCollection) { if (viewController.view.tag != interactiveView.view.tag) { if (viewController.detectionView.subviews) { for (UIView *detectView in viewController.detectionView.subviews) { CGRect viewRect; viewRect = [detectView convertRect:[detectView frame] toView:parentView]; // I could have checked to see if the below has subViews but didn't - In my current implementation it does anyway for (UIView *detectInteractView in interactiveView.detectionView.subviews) { CGRect interactRect; interactRect = [detectInteractView convertRect:[detectInteractView frame] toView:parentView]; if (CGRectIntersectsRect(viewRect, interactRect) == 1) { NSLog(@"collision detected"); [detectView setBackgroundColor:[UIColor blueColor]]; [detectInteractView setBackgroundColor:[UIColor blueColor]]; detectionCount++; } else { [detectView setBackgroundColor:[UIColor yellowColor]]; [detectInteractView setBackgroundColor:[UIColor yellowColor]]; } } } } } } // Logic if no items collided if (detectionCount == 0) { NSLog(@"Do something"); } } } } Now the method itself works to an extent but I don't think it's working with the nested values properly as the detection is off. A simplified version of this method works - Using CGRectIntersectsRect on the detectionView itself so I'm wondering if I'm looping through and checking the views correctly? I wasn't sure whether it was comparing in the same view but I suspect it is, I did modify the code slightly at one point, rather then comparing the values in self.view I took the viewController.detectView's UIViews into the interactiveView.detectView but the outcome was the same. It's rigged so the subviews change colour, but they change colour when they are not even touching, and when they do touch the wrong UIviews are changing colour Many thanks in advance

Read the article

Segmentation Fault (11) with modwsgi on CentOS 5.7 when running pyramid app

- by carbotex

I'm getting Segmentation fault error when trying to access the "Hello World" pyramid app. This error only occurs when running against CentOS 5.7 setup, but no problem whatsoever when tested against OSX and Arch Linux. Could it be a CentOS specific issue? [error] [client 10.211.55.2] Premature end of script headers: pyramid.wsgi [notice] child pid 31212 exit signal Segmentation fault (11) I have tried to follow the troubleshooting guides posted here http://code.google.com/p/modwsgi/wiki/InstallationIssues which suggests that it might caused by missing Shared Library. A quick check reveals that shared library is not the issue. [centos57@localhost modules]$ ldd mod_wsgi.so linux-gate.so.1 => (0x00e6a000) libpython2.7.so.1.0 => /home/python/lib/libpython2.7.so.1.0 (0x0024c000) libpthread.so.0 => /lib/libpthread.so.0 (0x00da8000) libdl.so.2 => /lib/libdl.so.2 (0x00cd6000) libutil.so.1 => /lib/libutil.so.1 (0x00110000) libm.so.6 => /lib/libm.so.6 (0x0085c000) libc.so.6 => /lib/libc.so.6 (0x00682000) /lib/ld-linux.so.2 (0x0012b000) Then I found another clue that might be able to solve my problem. Unfortunately libexpat is not the source of the problem. http://code.google.com/p/modwsgi/wiki/IssuesWithExpatLibrary [centos57@localhost bin]$ ldd ~/httpd/bin/httpd | grep expat libexpat.so.1 => /usr/local/lib/libexpat.so.1 (0x00b00000) [centos57@localhost bin]$ strings /usr/local/lib/libexpat.so.1 | grep expat libexpat.so.1 expat_2.0.1 [centos57@localhost bin]$ python Python 2.7.2 (default, Nov 26 2011, 08:08:44) [GCC 4.1.2 20080704 (Red Hat 4.1.2-51)] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import pyexpat >>> pyexpat.version_info (2, 0, 0) >>> I've been pulling my hair out trying to figure out what I'm missing in my setup. Why the problem only occurs with CentOS? Here is the detailed setup: Apache 2.2.19 Python 2.7.2 mod_wsgi-3.3 /home/httpd/conf/extra/pyramid.wsgi from pyramid.paster import get_app application = get_app('/home/homecamera/hcadmin/root/production.ini', 'main') /home/httpd/conf/extra/modwsgi.conf LoadModule wsgi_module modules/mod_wsgi.so WSGIScriptAlias /myapp /home/root/test.wsgi <Directory /home/root> WSGIProcessGroup pyramid Order allow,deny Allow from all </Directory> # Use only 1 Python sub-interpreter. Multiple sub-interpreters # play badly with C extensions. WSGIApplicationGroup %{GLOBAL} WSGIPassAuthorization On WSGIDaemonProcess pyramid user=daemon group=daemon processes=1 \ threads=4 \ python-path=/home/python/lib/python2.7/site-packages WSGIScriptAlias /hello /home/httpd/conf/extra/pyramid.wsgi <Directory /home/httpd/conf/extra> WSGIProcessGroup pyramid Order allow,deny Allow from all </Directory> Again this same setup works on OSX and Arch Linux but not on CentOS 5.7. Could someone out there point me to the right direction before I ran out of my hair. ==================================================================================== When apache started with gdb, I got a couple of warnings Reading symbols from /home/httpd/bin/httpd...done. Attaching to program: /home/httpd/bin/httpd, process 1821 warning: .dynamic section for "/lib/libcrypt.so.1" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations warning: .dynamic section for "/lib/libutil.so.1" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations gdb output. After hitting refresh button, to load pyramid. (gdb) cont Continuing. warning: .dynamic section for "/usr/lib/libgssapi_krb5.so.2" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations warning: .dynamic section for "/usr/lib/libkrb5.so.3" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations warning: .dynamic section for "/lib/libresolv.so.2" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x8edbb90 (LWP 1824)] 0x0814c120 in EVP_PKEY_CTX_dup () apache_error_log [info] mod_wsgi (pid=1821): Starting process 'pyramid' with threads=1. [info] mod_wsgi (pid=1821): Initializing Python. [info] mod_wsgi (pid=1821): Attach interpreter ''. [info] mod_wsgi (pid=1821): Create interpreter 'web.domain.com:20000|/hcadmin'. [info] [client 10.211.55.2] mod_wsgi (pid=1821, process='pyramid', application='web.domain.com:20000|/hcadmin'): Loading WSGI script '/home/httpd/conf/extra/pyramid.wsgi'. [error] hello 1

Search Results

Search found 9273 results on 371 pages for 'complex strings'.

Page 351/371 | < Previous Page | 347 348 349 350 351 352 353 354 355 356 357 358 | Next Page >

- by Davide Mauri

- by DigiMortal

- by MarkPearl

- by uejio

- by Helgi Hrafn Gunnarsson

- by Tim Coulter

- by Ender

- by Da Gopherboy

- by A.R.

- by Wodzu

- by OregonGhost

- by Simon Linder

- by Jonathan Leffler

- by shoreline

- by PreMagination

- by futureelite7

- by futureelite7

- by reef

- by Boris Nikolaevich

- by Brodie4598

- by Reacen

- by gregmac

- by tracelez

- by Chris

- by carbotex

< Previous Page | 347 348 349 350 351 352 353 354 355 356 357 358 | Next Page >