Search Results

Search found 26256 results on 1051 pages for 'information science'.

Page 351/1051 | < Previous Page | 347 348 349 350 351 352 353 354 355 356 357 358  | Next Page >

• Router reconfigures PC's and they can no longer access the internet via hardwired connection to DSL Modem

  - by zchads

  Router reconfigures PC's and they can no longer access the internet via hardwired connection to DSL Modem. Hardware Information: Buffalo Wireless Router/access point, Model: WZR-HP-G300NH-AP DSL Modem: Generic (actually not sure of manufacture). Service Provider: TOT (Thailand) Laptop-1: Windows XP and Belkin PCMIA Network Card Laptop-2: Windows XP unknown network card & Wifi Laptop-3: Windows 7 unknown network card & Wifi Outline of Problem/actions taken: After a recent power failure the router and laptop-1 connected to router were no longer able to access the internet. Actions taken to try and recover internet access: Using Laptop-1 tried to configure Router with PPPoe settings using software from Router Manufacture. During the installation process a Timeout error was experienced, unable to connect to WAN. Used Internet Explorer to communicate directly with Router using IP address. Changed settings to use PPPoe settings given by ISP. Router was not able to communicate with Internet. Repeated steps 1-4 again with no success. Reset Router and DSL modem. Repeated steps 1-4 again still no success. Tried connecting Laptop-1 directly to DSL to gain access to internet to research problem. No Network connection with DSL could be established…connection would be established for a second and then be lost and didn’t appear long enough to actually connect to DSL. Replugged LAN back into Router and connection was regained with laptop-1. Replugged Laptop-1 directly into DSL and again unable to establish network connection. Uninstalled network card and all of its drivers on Laptop-1. Reinstalled network card and drivers and tried connecting directly to DSL. Still unable to make network connection. Plugged DSL into Laptop-3 and Internet connection was established. Being Laptop-3 does not have a CD-Rom, Laptop-2 was tried to connect to the router. With Laptop-2 steps 1-7 ended up being repeated without success. Tried plugging Laptop-2 directly into DSL and again no network connection could be established. Using Laptop-3 with a direct connection to DSL downloaded latest Router FW. Installed router FW using Laptop-1. Tired the installation process again without success. Being desperate reinstalled OS on Laptop-1 still not success. Tried using “ipconfig” with router to see what was going on without success. With laptop-1 connected to DSL went through the “ipconfig /…” inputs to see if anything made a difference. Being the network card was not able to make a connection this provide very little information “media disconnected”. So now I have a router and two laptops which are unable to connect to the internet and sure could use some advice/help.

  Read the article

• .htaccess time on godaddy

  - by doug

  Hi there I'm trying to run a cakephp application on a godaddy linux account. The problem is that i get the error 500. I've read on cakephp discussion group that i have to edit the .htaccess file. 1) How much do i have to wait until i see the result? 2) More information about this error may be available in the server error log. Where are those servers log on a godaddy linux hosted account?

  Read the article

• Sort results in Google.

  - by atch

  Guys is there a way to have results from Google displayed in predefined order? Like for example the newest at the top? Very often I'm looking for some new information on C++0x and I would like to have results sorted in that way. Thank you.

  Read the article

• Setting up a very mixed Active Directory network to work with PowerShell Remote Administration

  - by erictheavg

  Summary: I want to be able to monitor the computers on my network, but don't need it to be automated. We're too small to purchase anything like MOM, but too big to do anything manually (~100 machines in two locations). I just keep running into issues, and was wondering if there's a master list of Group Policy settings I can distribute to my environment to get Remote Powershell working. Environment: Our AD network is pretty mixed. The end users have XP SP3, Win 7, and Win 7 x64. The servers include Win2k3 SP2, Win2k8, Win2k8 x64, Win2k8 R2, and Win2k8 R2 x64. Details: I'm trying to get it to work with Remote Powershell, but I run into errors like the following: Connecting to remote server failed with the following error message : The WinRM client cannot process the request. Default authentication may be used with an IP address under the following conditions: the transport is HTTPS or the destination is in the TrustedHosts list, and explicit credentials are provided. Use winrm.cmd to configure TrustedHosts. Note that computers in the TrustedHosts list might not be authenticated. For more information on how to set TrustedHosts run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic. + CategoryInfo : OpenError: (:) [], PSRemotingTransportException + FullyQualifiedErrorId : PSSessionStateBroken Then I go to the computer (Win2k3 SP2 server) and run winrm quickconfig per the recommendations via google, and it says: Make these changes [y/n]? y WinRM has been updated to receive requests. WinRM service started. WSManFault Message = The client cannot connect to the destination specified in the request. Verify that the service on the destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following command on the destination to analyze and configure the WinRM service: "winrm quickconfig". Error number: -2144108526 0x80338012 The client cannot connect to the destination specified in the request. Verify that the service on the destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following command on the destination to analyze and configure the WinRM service: "winrm quickconfig". That's right. It tells me to remedy my winrm quickconfig failure by running winrm quickconfig. I don't want to band-aid this project one google search at a time. I'm sure there is a step-by-step tutorial out there on how to set up a network for powershell remote administration. Does anyone know of one? Books are acceptable. Thanks in advance! I didn't think my question would get this long.

  Read the article

• How can I prevent tmux exiting with Ctrl-d?

  - by Cas

  I use tmux on my server and recently I found to my cost that ctrl-d will exit tmux and lose all the session information, my intention was to simply end the ssh session but failed to notice I was still in tmux until too late. I am aware that I should be careful in future when using ctrl-d but I wondered if there a way to prevent tmux for exiting when hitting ctrl-d by accident? A solution such as a prompt, confirmation or detaching would be fine.

  Read the article

• How to add an iptables rule with source IP address

  - by ???

  I have a bash script that starts with this: if [[ $EUID -ne 0 ]]; then echo "Permission denied (are you root?)." exit 1 elif [ $# -ne 1 ] then echo "Usage: install-nfs-server <client network/CIDR>" echo "$ bash install-nfs-server 192.168.1.1/24" exit 2 fi; I then try to add the iptables rules for NFS as follows: iptables -A INPUT -i eth0 -p tcp -s $1 --dport 111 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 111 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p udp -s $1 --dport 111 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p udp --sport 111 -m state --state ESTABLISHED -j ACCEPT service iptables save service iptables restart I get the error: Try iptables -h' or 'iptables --help' for more information. Bad argument111' Try iptables -h' or 'iptables --help' for more information. Bad argument111' Saving firewall rules to /etc/sysconfig/iptables: ^[[60G[^[[0;32m OK ^[[0;39m]^M Flushing firewall rules: ^[[60G[^[[0;32m OK ^[[0;39m]^M Setting chains to policy ACCEPT: filter ^[[60G[^[[0;32m OK ^[[0;39m]^M Unloading iptables modules: ^[[60G[^[[0;32m OK ^[[0;39m]^M Applying iptables firewall rules: ^[[60G[^[[0;32m OK ^[[0;39m]^M Loading additional iptables modules: ip_conntrack_netbios_ns ^[[60G[^[[0;32m OK ^[[0;39m]^M When I open /etc/sysconfig/iptables these are the rules: # Generated by iptables-save v1.3.5 on Mon Mar 26 08:00:42 2012 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [466:54208] :RH-Firewall-1-INPUT - [0:0] -A INPUT -j RH-Firewall-1-INPUT -A FORWARD -j RH-Firewall-1-INPUT -A OUTPUT -o eth0 -p tcp -m tcp --sport 111 -m state --state ESTABLISHED -j ACCEPT -A OUTPUT -o eth0 -p udp -m udp --sport 111 -m state --state ESTABLISHED -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 111 -m state --state ESTABLISHED -j ACCEPT -A OUTPUT -o eth0 -p udp -m udp --sport 111 -m state --state ESTABLISHED -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m state --state NEW -m udp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -i lo -j ACCEPT -A RH-Firewall-1-INPUT -p icmp -m icmp --icmp-type any -j ACCEPT -A RH-Firewall-1-INPUT -p esp -j ACCEPT -A RH-Firewall-1-INPUT -p ah -j ACCEPT -A RH-Firewall-1-INPUT -d 224.0.0.251 -p udp -m udp --dport 5353 -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m tcp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited COMMIT # Completed on Mon Mar 26 08:00:42 2012 ~ "/etc/sysconfig/iptables" 32L, 1872C I've also tried: iptables -I RH-Firewall-1-INPUT 1 -m state --state NEW -m tcp -p tcp --source $1 --dport 111 -j ACCEPT iptables -I RH-Firewall-1-INPUT 2 -m udp -p udp --source $1 --dport 111 -j ACCEPT

  Read the article

• Using smartctl to get vendor specific Attributes from ssd drive behind a SmartArray P410 controller

  - by Lairsdragon

  Hi! Recently I have deployed some HP server with SSD's behind a SmartArray P410 controller. While not official supported from HP the server work well sofar. Now I like to get wear level info's, error statistics etc from the drive. While the SA P410 supports a passthru of the SMART Command to a single drive in the array the output I was not able to the the interesting things from the drive. In this case especially the value the Wear level indicator is from interest for me (Attr.ID 233), but this is ony present if the drive is directly attanched to a SATA Controller. smartctl on directly connected ssd: # smartctl -A /dev/sda smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 5 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time 0x0000 100 000 000 Old_age Offline In_the_past 0 4 Start_Stop_Count 0x0000 100 000 000 Old_age Offline In_the_past 0 5 Reallocated_Sector_Ct 0x0002 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 8561 12 Power_Cycle_Count 0x0002 100 100 000 Old_age Always - 55 192 Power-Off_Retract_Count 0x0002 100 100 000 Old_age Always - 29 232 Unknown_Attribute 0x0003 100 100 010 Pre-fail Always - 0 233 Unknown_Attribute 0x0002 088 088 000 Old_age Always - 0 225 Load_Cycle_Count 0x0000 198 198 000 Old_age Offline - 508509 226 Load-in_Time 0x0002 255 000 000 Old_age Always In_the_past 0 227 Torq-amp_Count 0x0002 000 000 000 Old_age Always FAILING_NOW 0 228 Power-off_Retract_Count 0x0002 000 000 000 Old_age Always FAILING_NOW 0 smartctl on P410 connected ssd: # ./smartctl -A -d cciss,0 /dev/cciss/c1d0 smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net (Right, it is complety empty) smartctl on P410 connected hdd: # ./smartctl -A -d cciss,0 /dev/cciss/c0d0 smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Current Drive Temperature: 27 C Drive Trip Temperature: 68 C Vendor (Seagate) cache information Blocks sent to initiator = 1871654030 Blocks received from initiator = 1360012929 Blocks read from cache and sent to initiator = 2178203797 Number of read and write commands whose size <= segment size = 46052239 Number of read and write commands whose size > segment size = 0 Vendor (Seagate/Hitachi) factory information number of hours powered up = 3363.25 number of minutes until next internal SMART test = 12 Do I hunt here a bug, or is this a limitation of the p410 SMART cmd Passthru?

  Read the article

• Lenovo Ideapad Y480 can't reinstall windows?

  - by elegantonyx

  Alright, so here's the deal... For a while, I wanted to mess with Linux. I don't know why, but I wanted to. So, what I did was use WUBI and install Ubuntu. Because of some unknown reason (Intel Rapid Start? Half the drivers being on a Lenovo-installed SSD [separate from the main hard drive]?) it wouldn't dual boot. So, I decided to use Linux Mint instead, and install it in a partition. Since Windows 7 Home Premium won't make partitions any more if you have a certain number already, I just shrank my system drive and left empty space for the installer to claim. When I installed Mint, it worked, but left my Windows 7 installation unable to boot and eventually it corrupted. I tried to use a system repair disc I burned earlier but it didn't find the Windows installation, so I assume the partition corrupted. I used this link:http://www.pcworld.com/article/248995/how_to_install_windows_7_without_the_disc.html to try and reinstall Windows. What happened was that originally it said that the partition I was trying to reinstall from had been locked down by the OEM (Lenovo). So, I went into GParted, wiped EVERYTHING, and selected 'Construct new Boot record' or whatever that function is, and now the error is: "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information." Does anyone know how to see the log files? Can anyone help? This system is a month old but the warranty only covers hardware failures, and I would need to pay around USD$60 for them to fix it. Please help. Any ideas? this is my main machine... Extra information: I have at my disposal: System Repair Disc (Burned myself) Windows 7 Home Premium 64 bit SP1 installation disk (burned from the pcworld links) Gparted Live CD Linux Mint 13 live cd A system backup (from the morning before this catastrophe) made using the Windows Backup and Restore. I put it on an external drive...that should be safe for now.

  Read the article

• Excel inventory spreadsheet

  - by user24142

  Hi, I need to know the best way to set up a spreadsheet which has product information (i.e name cost, sale price, number purchased, number sold, number left in stock) Every week I check the stock so need to be able to to enter the new current value of the number left in stock. The every week I buy new stock. Sometimes the stock changes in price. The spreadsheet needs to also keep track of how much money I should have from the sales of the stock and then therefore the profit made etc. Thanks

  Read the article

• Find permission problem on Windows 2003

  - by Tomas

  Hello, I am trying to run process(console executable) on remote PC from asp.net application using WMI and get "Access is denied" problem. I have checked all event viewer logs on remote PC, no information related this. Where do I start searching for problem? Does Windows has some kind of permission monitor tool? Also I have tried to use Procmon.exe but hard to understand what to search, my process even do not listed in Procmon. Regards, Tomas

  Read the article

• Any rerefence of CPU world statistics?

  - by Áxel Costas Pena

  I am looking for any referencee about computer power statistics across the world. My main interest is about real computing capabilities, so I'd prefer information about real processor power, and even best if it includes also other critical hardware statistics, like RAM memory, but if it isn't possible, maybe statistics about brand/model distribution will be also useful. I've Googled for some minutes and I've found nothing related.

  Read the article

• Can I use a 4G/LTE router from Japan (Asia) in Norway (Europe)?

  - by Leif

  We are considering to buy a wireless 4G/LTE router (LG L-04D) in Japan. Since we are moving to Norway (Europe) soon, we want something that would also work there (with a new SIM card and service provider, of course). Does anyone know if this device will work in Norway? To my current understanding, there are some frequency standards to consider, but I was not able to find any understandable information. Many thanks in advance.

  Read the article

• Establishing Serial Port communication through USB in Linux

  - by Prashant Singh

  I am new to Ubuntu and I need to establish a serial port communication between my PC and microcontroller MSP430G2452. On connection the USB available with the Launchpad and using lsusb. It identifies the port as: Bus 005 Device 003: ID 0451:f432 Texas Instruments, Inc. eZ430 Development Tool After establishing such a connection what I need to do? My aim is to send a byte of information in Linux.

  Read the article

• How can I prevent cron from filling up my syslog?

  - by user7321

  I have a script which needs to be executed each minute. The problem is that cron is logging to /var/log/syslog each time it executes. I end up seeing something like this repeated over and over in /var/log/syslog- Jun 25 00:56:01 myhostname /USR/SBIN/CRON[1144]: (root) CMD (php /path/to/script.php /dev/null) btw- i'm using debian My questions is- Is there any way I can tell cron not write this information to syslog every time?

  Read the article

• Reg Query Issues

  - by Fitz

  I have a batch script that does reporting on our systems and part of it queries the registry for information. The script fails to get the key's value when its ran by the system, but whenever I run the script myself, it works perfectly the command: REG QUERY "HKEY_LOCAL_MACHINE\SOFTWARE\TrendMicro\ScanMail for Exchange\CurrentVersion" /v PatternStringFormatted > current1.tmp should return: HKEY_LOCAL_MACHINE\SOFTWARE\TrendMicro\ScanMail for Exchange\CurrentVersion PatternStringFormatted REG_SZ 6.645.00 This script is failing on a Server 2008 R2 machine, but runs fine on Server 2003 R2 machines.

  Read the article

• Postfixadmin Invalid Query

  - by Jm Cruz

  This is my first time running a postfixadmin, so in my setup.php, I'm getting this error DEBUG INFORMATION: Invalid query: Unknown column 'create_date' in 'mailbox' I'm running it with MySQL. So if i'm right, my guess is that i need to create a column? under mailbox table on the postfix database? but how or whats the right syntax into creating a timedate column? My knowledge with mysql and postfix are very minimal btw. Thanks in advance.

  Read the article

• How can you get x509 to work with Trac?

  - by sasker

  Hi I have been trying to find a way to get x509 certs for authentication for Trac but I could not find any plugins on TracHacks or tutorials on this. The closest I've seen so far is this post on google groups http://groups.google.com/group/trac-users/browse_thread/thread/0ea6cb82058eb9a9?pli=1 Does anyone have any idea where I can find relevant information or know how I can go about doing this? Thanks

  Read the article

• Apache rotatelogs gives error

  - by newbie.my

  Recently I have implement apache 2.4.1 in my web server.The problem is the rotate logs seems to be not functioning.Here is the output in the error_log: [core:error] [pid 13060:tid 47015847145408] (2)No such file or directory The command line that i have put in the httpd.conf are such as below: CustomLog "|bin/rotatelogs -l /var/log/logfile.%Y.%m.%d 86400" combined Is there anything wrong here with my setup?For your information I've already tested it in apache 2.2.22 and everythings is perfectly working. Thanks.

  Read the article

• UserInformations are getting updated.

  - by CrazyNick

  Whatever changes made on the UserInformtion in AD, it is not getting updated in users Mysite. Farm Information: SharePoint 2007 + SP2 + Dec-09 CU. Issue: AD-Team changes the user email-id. changes are getting updated in SSP. changes are not getting populated from SSP to Mysite/Site-collections. any thoughts?

  Read the article

• Access full BIOS settings

  - by FlxEx

  I recently purchased a Acer Aspire TimelineU M5-481TG-6814, only to discover that the sound isn't working. Through my research, it seems that the most probable cause is that the onboard audio is disabled in the BIOS. However, the option to enable the onboard audio just isn't present in the BIOS. So my question is: is there any way of accessing such settings in the BIOS? Some extra information: link my purchase System BIOS version: InsydeH20 Setup Utility Rev3.7, V1.05

  Read the article

• Determine Users Accessing a Shared Folder Using PowerShell

  - by MagicAndi

  Hi, I need to determine the users/sessions accessing a shared folder on a Windows XP (SP2) machine using a PowerShell script (v 1.0). This is the information displayed using Computer Management | System Tools | Shared Folders | Sessions. Can anyone give me pointers on how to go about this? I'm guessing it will require a WMI query, but my initial search online didn't reveal what the query details will be. Thanks, MagicAndi

  Read the article

• VMWare tools not installing with an error

  - by JDS

  VMWare tools not installing on Ubuntu 12.04. I'm using Chef to manage the installation, but the Apt commands fail if run manually. I'm using the VMWare tool Debian repo. Example: $ cat /etc/apt/sources.list.d/vmware-tools-source.list deb http://packages.vmware.com/tools/esx/5.0u2/ubuntu precise main When trying to install, most packages seem to go ok, but one, "vmware-tools-foundation", does not. Example: $ apt-get -q -y install vmware-tools-esx-nox=8.6.10-1.precise Reading package lists... Building dependency tree... Reading state information... You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: vmware-tools-esx-kmods-3.2.0-23-generic : Depends: vmware-tools-foundation (>= 8.6.10) but it is not going to be installed vmware-tools-esx-nox : Depends: ...snip list of deps... E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). $ apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: vmware-tools-foundation The following NEW packages will be installed: vmware-tools-foundation 0 upgraded, 1 newly installed, 0 to remove and 118 not upgraded. 7 not fully installed or removed. Need to get 0 B/5,886 B of archives. After this operation, 86.0 kB of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 103499 files and directories currently installed.) Unpacking vmware-tools-foundation (from .../vmware-tools-foundation_8.6.10-1.precise_all.deb) ... VMware Tools cannot install because it appears that another installation of VMware Tools is already present. Please remove the previous installation and then attempt to install this copy of VMware Tools again. dpkg: error processing /var/cache/apt/archives/vmware-tools-foundation_8.6.10-1.precise_all.deb (--unpack): subprocess new pre-installation script returned error exit status 1 Errors were encountered while processing: /var/cache/apt/archives/vmware-tools-foundation_8.6.10-1.precise_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) The key seems to be this error: "VMware Tools cannot install because it appears that another installation of VMware Tools is already present. Please remove the previous installation and then attempt to install this copy of VMware Tools again." However, I've tryed removing and purging and can't seem to "trick" VMWare tools into thinking the packages are gone. Apt thinks they are gone. Is there some service/file/cache/lock left that VMWare tools sees that makes it think that VMWare tools are still installed? I've googled and googled but there is no answer to this question with my particular circumstances on the interwebs. VMWare's documentation of this error is minimal.

  Read the article

• excel pivot table : is it possible to display details on single click of cell in same sheet

  - by bala

  I have an excel pivot table the pivot table contains rows like Status-count open-10 closed-100 in progress-50 Now, on click of the count cells, is it possible to display the relevant details in teh same sheet? or is it possible to write a macro to popup a messagebox with the row information?

  Read the article

• web services access not being reached thru the web browser

  - by Tony

  I am trying to reference my .asmx webservices in .NET but my server is not exposed to the internet. When I put on the following address I get the message mentioned below. What's the reason for not being able to see the directory? Am I missing something in my IIS configuraction? Am I missing anything in my permissions? Just as reference I have other folders with webservices and I have the same issue. When I login to the server I am doing it with my windows user and password (I am using windows authentication). It's necessary to mention that when I put the URL I am getting a popup screen to put in my userid and password but it seems that's not able to validate since keeps asking me a couple of times. Let me know if you need more information to address this issue . http://appsvr02/Inetpub/wwwroot/DevWebApi/ Internet Explorer cannot display the webpage What you can try: It appears you are connected to the Internet, but you might want to try to reconnect to the Internet. Retype the address. Go back to the previous page. Most likely causes: •You are not connected to the Internet. •The website is encountering problems. •There might be a typing error in the address. More information This problem can be caused by a variety of issues, including: •Internet connectivity has been lost. •The website is temporarily unavailable. •The Domain Name Server (DNS) is not reachable. •The Domain Name Server (DNS) does not have a listing for the website's domain. •If this is an HTTPS (secure) address, click tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. For offline users You can still view subscribed feeds and some recently viewed webpages. To view subscribed feeds 1.Click the Favorites Center button , click Feeds, and then click the feed you want to view. To view recently visited webpages (might not work on all pages) 1.Click Tools , and then click Work Offline. 2.Click the Favorites Center button , click History, and then click the page you want to view.

  Read the article

• Packet sniffing a webserver

  - by Shawn Mclean

  I have a homework in which I should explain how I would break into a server, retrieve a file and cover my tracks. My main question: is there a way to packet sniff a remote web server? Other information would be appreciated on covering tracks.

  Read the article

< Previous Page | 347 348 349 350 351 352 353 354 355 356 357 358  | Next Page >