Search Results

Search found 10447 results on 418 pages for 'blog blomqvist no'.

Page 352/418 | < Previous Page | 348 349 350 351 352 353 354 355 356 357 358 359  | Next Page >

  • Hibernate: order multiple one-to-many relations

    - by Markos Fragkakis
    I have a search screen, using JSF, JBoss Seam and Hibernate underneath. There are columns for A, B and C, where the relations are as follows: A (1< -- ) B (1< -- ) C A has a List< B and B has a List< C (both relations are one-to-many). The UI table supports ordering by any column (ASC or DESC), so I want the results of the query to be ordered. This is the reason I used Lists in the model. However, I got an exception that Hibernate cannot eagerly fetch multiple bags (it considers both lists to be bags). There is an interesting blog post here, and they identify the following solutions: Use @IndexColumn annotation (there is none in my DB, and what's more, I want the position of results to be determined by the ordering, not by an index column) Fetch lazily (for performance reasons, I need eager fetching) Change List to Set So, I changed the List to Set, which by the way is more correct, model-wise. First, if don't use @OrderBy, the PersistentSet returned by Hibernate wraps a HashSet, which has no ordering. Second, If I do use @OrderBy, the PersistentSet wraps a LinkedHashSet, which is what I would like, but the OrderBy property is hardcoded, so all other ordering I perform through the UI comes after it. I tried again with Sets, and used SortedSet (and its implementation, TreeSet), but I have some issues: I want ordering to take place in the DB, and not in-memory, which is what TreeSet does (either through a Comparator, or through the Comparable interface of the elements). Second, I found that there is the Hibernate annotation @Sort, which has a SortOrder.UNSORTED and you can also set a Comparator. I still haven't managed to make it compile, but I am still not convinced it is what I need. Any advice?

    Read the article

  • Setting the comment of a column to that of another column in Postgresql

    - by dland
    Suppose I create a table in Postgresql with a comment on a column: create table t1 ( c1 varchar(10) ); comment on column t1.c1 is 'foo'; Some time later, I decide to add another column: alter table t1 add column c2 varchar(20); I want to look up the comment contents of the first column, and associate with the new column: select comment_text from (what?) where table_name = 't1' and column_name = 'c1' The (what?) is going to be a system table, but after having looked around in pgAdmin and searching on the web I haven't learnt its name. Ideally I'd like to be able to: comment on column t1.c1 is (select ...); but I have a feeling that's stretching things a bit far. Thanks for any ideas. Update: based on the suggestions I received here, I wound up writing a program to automate the task of transferring comments, as part of a larger process of changing the datatype of a Postgresql column. You can read about that on my blog.

    Read the article

  • Is there a more easy way to create a WCF/OData Data Service Query Provider?

    - by routeNpingme
    I have a simple little data model resembling the following: InventoryContext { IEnumerable<Computer> GetComputers() IEnumerable<Printer> GetPrinters() } Computer { public string ComputerName { get; set; } public string Location { get; set; } } Printer { public string PrinterName { get; set; } public string Location { get; set; } } The results come from a non-SQL source, so this data does not come from Entity Framework connected up to a database. Now I want to expose the data through a WCF OData service. The only way I've found to do that thus far is creating my own Data Service Query Provider, per this blog tutorial: http://blogs.msdn.com/alexj/archive/2010/01/04/creating-a-data-service-provider-part-1-intro.aspx ... which is great, but seems like a pretty involved undertaking. The code for the provider would be 4 times longer than my whole data model to generate all of the resource sets and property definitions. Is there something like a generic provider in between Entity Framework and writing your own data source from zero? Maybe some way to build an object data source or something, so that the magical WCF unicorns can pick up my data and ride off into the sunset without having to explicitly code the provider?

    Read the article

  • Asp.Net MVC 2: How exactly does a view model bind back to the model upon post back?

    - by Dr. Zim
    Sorry for the length, but a picture is worth 1000 words: In ASP.NET MVC 2, the input form field "name" attribute must contain exactly the syntax below that you would use to reference the object in C# in order to bind it back to the object upon post back. That said, if you have an object like the following where it contains multiple Orders having multiple OrderLines, the names would look and work well like this (case sensitive): This works: Order[0].id Order[0].orderDate Order[0].Customer.name Order[0].Customer.Address Order[0].OrderLine[0].itemID // first order line Order[0].OrderLine[0].description Order[0].OrderLine[0].qty Order[0].OrderLine[0].price Order[0].OrderLine[1].itemID // second order line, same names Order[0].OrderLine[1].description Order[0].OrderLine[1].qty Order[0].OrderLine[1].price However we want to add order lines and remove order lines at the client browser. Apparently, the indexes must start at zero and contain every consecutive index number to N. The black belt ninja Phil Haack's blog entry here explains how to remove the [0] index, have duplicate names, and let MVC auto-enumerate duplicate names with the [0] notation. However, I have failed to get this to bind back using a nested object: This fails: Order.id // Duplicate names should enumerate at 0 .. N Order.orderDate Order.Customer.name Order.Customer.Address Order.OrderLine.itemID // And likewise for nested properties? Order.OrderLine.description Order.OrderLine.qty Order.OrderLine.price Order.OrderLine.itemID Order.OrderLine.description Order.OrderLine.qty Order.OrderLine.price I haven't found any advice out there yet that describes how this works for binding back nested ViewModels on post. Any links to existing code examples or strict examples on the exact names necessary to do nested binding with ILists? Steve Sanderson has code that does this sort of thing here, but we cannot seem to get this to bind back to nested objects. Anything not having the [0]..[n] AND being consecutive in numbering simply drops off of the return object. Any ideas?

    Read the article

  • rails + sheevaplug = rails home development server and more

    - by microspino
    Hello I'd like to build a "Rails Brick" using a Sheevaplug from Marvell (O.S. is Ubuntu out of the box but You can install other distributions on It). It will be a home server and a silent, low cost (99$) low energy development machine. I'd like to add rails RVM, lot of gems, git-based heroku like deployment, passenger + nginx. This way I could have a portable server with a complete development environment and maybe I could find a hosting company where I can co-locate a grid of this devices or I can sell It as a simple little server for 10 or less users offices, with some centralized rails services (I think to a CMS, a BLOG, a WIKI, calendar or whatever this little jewel could afford). The usb port could make It a print server too or a UMTS link to the web via HUAWEI like usb UMTS keys. Can you give me some hint about: Is this project a crazy-close-to-failure idea? Why? which gem would You include? which rails open source app would you suggest? I have already an Excito Bubba Server at home, I saw the TonidoPlug so It came up in my mind to build something similiar but Rails based (Bubba is PHP based, TonidoPlug I don't know but It does not seems a Rails thing).

    Read the article

  • Trouble binding WPF Menu to ItemsSource

    - by chaiguy
    I would like to avoid having to build a menu manually in XAML or code, by binding to a list of ICommand-derived objects. However, I'm experiencing a bit of a problem where the resulting menu has two levels of menu-items (i.e. each MenuItem is contained in a MenuItem): My guess is that this is happening because WPF is automatically generating a MenuItem for my binding, but the "viewer" I'm using actually already is a MenuItem (it's derived from MenuItem): <ContextMenu x:Name="selectionContextMenu" ItemsSource="{Binding Source={x:Static OrangeNote:Note.MultiCommands}}" ItemContainerStyleSelector="{StaticResource separatorStyleSelector}"> <ContextMenu.ItemTemplate> <DataTemplate> <Viewers:NoteCommandMenuItemViewer CommandParameter="{Binding Source={x:Static OrangeNote:App.Screen}, Path=SelectedNotes}" /> </DataTemplate> </ContextMenu.ItemTemplate> </ContextMenu> (The ItemContainerStyleSelector is from http://bea.stollnitz.com/blog/?p=23, which allows me to have Separator elements inside my bound source.) So, the menu is bound to a collection of ICommands, and each item's CommandParameter is set to the same global target (which happens to be a collection, but that's not important). My question is, is there any way I can bind this such that WPF doesn't automatically wrap each item in a MenuItem?

    Read the article

  • Submit information to url, but also open PDF

    - by Mad Ducky Digital Branding
    I have a client whose desire is to have her Wordpress blog show a MailChimp form on her home page as a gateway to a .pdf. I need the following behavior to occur when the user clicks "Submit": execute the included MailChimp's javascript file; this ensures the form was properly filled, and then performs the sign-up to the newsletter list (don't need help with this part) then show the user an informational PDF for download or viewing EDIT: The logical order was flipped from when I originally posted this. The script should execute, and only if the script gets executed properly should the PDF show to the user Note: My experience level with HTML and PHP is 3/4, and with JS I am 2/4 EDIT: (seems more like 1/4 at this point lol). If my research is correct, PHP (server-side language) would be used to do that which the client wants. Additional validation is not necessary beyond what MailChimp's script provides (it ensures that user has submitted a completed form) is not necessary in this case (the client says it's ok if the e-mail isn't valid at all). EDIT: Reworded this sentence from original post to be more clear The .pdf URL and content is static, and simply needs to be shown, not generated. ----RESEARCH---- I know that the Mailchimp form uses the following line to actually submit the information, but I want to do the action mentioned below, as well as open the aforementioned .pdf: <form action="http://*BLAH*.us2.list-manage.com/subscribe/post?u=*BLAHBLAH*&amp;id=*BLAHBLAHBLAH*" method="post" id="mc-embedded-subscribe-form" name="mc-embedded-subscribe-form" class="validate" target="_blank"> I am reading on other sites that I can conceivably point "action" to a .php file, but if there is a way to do this with javascript - since its using the .js file that I created for that already anyways, then I would be most happy. Barring that, I'll take what I can get.. ----SOLUTION?---- ...

    Read the article

  • Beginning 3.2+ iPhone development

    - by Dinah
    I'm interested in learning Objective C for iPhone development. This is a topic which I realize has been covered to death. The qualifying difference is: I'd like to start learning beginning with the latest version (the most recent iPhone OS as of May, 2010 is ver. 3.2 and 4 beta is also out). I'd like to not have to wade through or unlearn legacy information. Using the links I've found throughout related topics on Stack Overflow, I'll read a blog post or tutorial which will say one thing, but then the comments will say, "this is different now in version xyz." For example, I've found this a few times regarding memory management/garbage collection. I assume that Apple's "getting started" doc.s will have the most recent info but many SO posts have said that those are not the most clear. The Stanford iPhone course looks great, but how do I know if it still applies to the most recent versions? Where should one start learning Objective C for iPhone development starting with version 3.2 or later without having as much exposure to legacy information?

    Read the article

  • drupal ajax create node

    - by Mark
    I need to create a drupal node via ajax. I'm looking for some instructions as in: http://stackoverflow.com/questions/960343/creating-a-drupal-node-with-javascript But with more detail, and including the js steps. The JS will probably look something like this: var title = 'Demo Node Title' $('button').click(function () { $.post('demo/js', {"title" : title}, function(data) { var json = eval("(" + data + ")"); if (json['status'] == "error") { alert(json['message']); } else if (json['status'] == "success") { alert(json['message']); // Need to return the nid of the new node here. Anyone know how to do this? } }); }); The PHP (copied from the other question, but I don't understand it much, how do I set the title of the node? also as the comments says, how do I set an input filter?): <?php /** * Implementation of hook_menu(). */ function demo_menu() { $items = array(); $items['demo/js'] = array( 'title' => 'Demo page', 'page callback' => 'demo_js_page', 'access callback' => TRUE, 'type' => MENU_CALLBACK, ); return $items; } /** * Page callback that saves a node. */ function demo_js_page() { if (isset($_REQUEST['title'])) { $node = new stdClass; $node->type = 'blog'; $node->title = check_plain($_REQUEST['title']); node_save($node); drupal_set_message(t('Created node %title', array('%title' => $_REQUEST['title']))); } return t('Thanks for visiting'); } Thanks in advance.

    Read the article

  • WebFaultException http status code is not passed

    - by Mike Bantegui
    I have the following service method: <OperationContract()> <WebGet([ResponseFormat]:=WebMessageFormat.Json)> Function ShouldThrowException() As Boolean It's implementation does only one thing, which is to throw a WebFaultException. Public Function ShouldThrowException() As Boolean Implements IRestService.ShouldThrowException Throw New WebFaultException(Of String)("This should fail", HttpStatusCode.BadRequest) End Function My web.config reads as: <endpointBehaviors> <behavior name="WebEndpointBehavior"> <webHttp /> </behavior> </endpointBehaviors> .. snip .. <webHttpBinding> <binding name="WebBinding" crossDomainScriptAccessEnabled="true"> <security mode="None" /> </binding> </webHttpBinding> .. snip .. <service name="RestService"> <endpoint address="" binding="webHttpBinding" behaviorConfiguration="WebEndpointBehavior" bindingConfiguration="WebBinding" contract="IRestService" name="RestService"> </endpoint> </service> When I call ShouldThrowException via my browser, I only get the following: "This should fail" I was expecting to get a 400 Bad Request error on the page. If I inspect the page using FireBug, I see that the HTTP status code that was returned is a 200 OK. According to this blog post, I should be seeing this exception. Except I'm not. What am I doing wrong here?

    Read the article

  • Using jQuery to parse an RSS feed, having trouble in firefox and chrome.

    - by sjmarshy
    I used a jQuery library called jFeed to parse and display my blogs rss feed on my personal website. It worked perfectly well at first, but upon checking later it simply displays nothing, except in Internet Explorer, where it seems to work fine. After checking the javascript console using Firebug in Firefox, it shows an error in the 'XML' tab as follows: XML Parsing Error: no element found Location: moz-nullprincipal:{3f8a0c62-32b4-4f63-b69c- 9ef402b40b64} Line Number 1, Column 1: ^ Though I have no idea what to do with this information. Here is the code I used to get the rss feed and display it (it is almost exactly the same as the example provided by the jFeed website): jQuery.getFeed({ url: 'http://sammarshalldesign.co.uk/blog/wordpress/?feed=rss2', success: function(feed) { var html = ''; for(var i = 0; i < feed.items.length && i < 5; i++) { var item = feed.items[i]; html += '<h3>' + '<a href="' + item.link + '">' + item.title + '</a>' + '</h3>'; html += '<div>' + item.description + '</div>'; }//end for jQuery('#feed').append(html); }//end feed function });//end getfeed Any help would be really appreciated.

    Read the article

  • HttpModule.Init - safely add HttpApplication.BeginRequest handler in IIS7 integrated mode

    - by Paul Smith
    My question is similar but not identical to: http://stackoverflow.com/questions/1123741/why-cant-my-host-softsyshosting-com-support-beginrequest-and-endrequest-event (I've also read the mvolo blog referenced therein) The goal is to successfully hook HttpApplication.BeginRequest in the IHttpModule.Init event (or anywhere internal to the module), using a normal HttpModule integrated via the system.webServer config, i.e. one that doesn't: invade Global.asax or override the HttpApplication (the module is intended to be self-contained & reusable, so e.g. I have a config like this): <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules> <remove name="TheHttpModule" /> <add name="TheHttpModule" type="Company.HttpModules.TheHttpModule" preCondition="managedHandler" /> So far, any strategy I've tried to attach a listener to HttpApplication.BeginRequest results in one of two things, symptom 1 is that BeginRequest never fires, or symptom 2 is that the following exception gets thrown on all managed requests, and I cannot catch & handle it from user code: Stack Trace: [NullReferenceException: Object reference not set to an instance of an object.] System.Web.PipelineModuleStepContainer.GetEventCount(RequestNotification notification, Boolean isPostEvent) +30 System.Web.PipelineStepManager.ResumeSteps(Exception error) +1112 System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) +113 System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +616 Commenting out app.BeginRequest += new EventHandler(this.OnBeginRequest) in Init stops the exception of course. Init does not reference the Context or Request objects at all. I have tried: Removed all references to HttpContext.Current anywhere in the project (still symptom 1) Tested removing all code from the body of my OnBeginRequest method, to ensure the problem wasn't internal to the method (= exception) Sniffing the stack trace and only calling app.BeginRequest+=... when if the stack isn't started by InitializeApplication (= BeginRequest not firing) Only calling app.BeginRequest+= on the second pass through Init (= BeginRequest not firing) Anyone know of a good approach? Is there some indirect strategy for hooking Application_Start within the module (seems unlikely)? Another event which a) one can hook from a module's constructor or Init method, and b) which is subsequently a safe place to attach BeginRequest event handlers? Thanks much

    Read the article

  • Are SharePoint site templates really less performant than site definitions?

    - by Jim
    So, it seems in the SharePoint blogosphere that everybody just copies and pastes the same bullet points from other blogs. One bullet point I've seen is that SharePoint site templates are less performant than site definitions because site definitions are stored on the file system. Is that true? It seems odd that site templates would be less performant. It's my understanding that all site content lives in a database, whether you use a site template or a site definition. A site template is applied once to the database, and from then on the site should not care if the content was created using a site template or not. So, does anybody have an architectural reason why a site template would be less performant than a site definition? Edit: Links to the blogs that say there is a performance difference: From MSDN: Because it is slow to store templates in and retrieve them from the database, site templates can result in slower performance. From DevX: However, user templates in SharePoint can lead to performance problems and may not be the best approach if you're trying to create a set of reusable templates for an entire organization. From IT Footprint: Because it is slow to store templates in and retrieve them from the database, site templates can result in slower performance. Templates in the database are compiled and executed every time a page is rendered. From Branding SharePoint:Custom site definitions hold the following advantages over custom templates: Data is stored directly on the Web servers, so performance is typically better. At a minimum, I think the above articles are incomplete, and I think several are misleading based on what I know of SharePoints architecture. I read another blog post that argued against the performance differences, but I can't find the link.

    Read the article

  • WYSIHAT Photos upload not working - Paperclip - Ruby on Rails

    - by bgadoci
    I just successfully installed WysiHat in my rails blog. Seems that the 'add a picture' feature is not working. It successfully allows me to find and select a picture from my desktop but upon clicking save, it does nothing. I also have Paperclip successfully installed. I am wondering if this may have something to do with it. Perhaps Paperclip is getting in the way, or, perhaps I need to connect Paperclip and WysiHat somehow. Any ideas? (let me know if I need to post any code). Also, WysiHat-engine uses facebox, not sure if that is relevant. UPDATE: Added Server Log, looks like paperclip is saving it so not sure what else is going wrong. Processing PostsController#update (for 127.0.0.1 at 2010-04-23 16:42:14) [PUT] Parameters: {"commit"=>"Update", "post"=>{"body"=>"<p>Duis autem vel eum iriure dolor in hendrerit in vulputate velit esse molestie consequat, vel illum dolore eu feugiat nulla facilisis at vero eros et accumsan et iusto odio dignissim qui blandit praesent luptatum zzril delenit augue duis dolore te feugait nulla facilisi. Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat.</p>", "title"=>"Rails Code for Search"}, "authenticity_token"=>"hndm6pxaPLfgnSMFAmLDGNo86mZG3XnlfJoNOI/P+O8=", "id"=>"105"} Post Load (0.2ms) SELECT * FROM "posts" WHERE ("posts"."id" = 105) Post Update (0.3ms) UPDATE "posts" SET "updated_at" = '2010-04-23 21:42:14', "body" = '<p>Duis autem vel eum iriure dolor in hendrerit in vulputate velit esse molestie consequat, vel illum dolore eu feugiat nulla facilisis at vero eros et accumsan et iusto odio dignissim qui blandit praesent luptatum zzril delenit augue duis dolore te feugait nulla facilisi. Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat.</p>' WHERE "id" = 105 [paperclip] Saving attachments. Redirected to http://localhost:3000/posts/105 Completed in 12ms (DB: 0) | 302 Found [http://localhost/posts/105]

    Read the article

  • Class/Model Level Validation (as opposed to Property Level)? (ASP.NET MVC 2.0)

    - by Erx_VB.NExT.Coder
    Basically, what the title says. I have several properties that combine together to really make one logical answer, and i would like to run a server-side validation code (that i write) which take these multiple fields into account and hook up to only one validation output/error message that users see on the webpage. I looked at scott guthries method of extending an attribute and using it in yoru dataannotations declarations, but, as i can see, there is no way to declare a dataannotations-style attribute on multiple properties, and you can only place the declarations (such as [Email], [Range], [Required]) over one property :(. i have looked at the PropertiesMustMatchAttribute in the default mvc 2.0 project that appears when you start a new project, this example is as useful as using a pair of pins to check your motor oil - useless! i have tried this method, however, creating a class level attribute, and have no idea how to display the error from this in my aspx page. i have tried html.ValidationMessage("ClassNameWhereAttributeIsAdded") and a variety of other thing, and it has not worked. and i should mention, there is NOT ONE blog post on doing validation at this level - despite this being a common need in any project or business logic scenario! can anyone help me in having my message displayed in my aspx page, and also if possible a proper document or reference explaining validation at this level?

    Read the article

  • Use a resource dictionary as theme in Silverlight

    - by SaphuA
    Hello, I have developed an application which allows the user to switch between themes. I'm doing this by including the xaml file as a resource in my project and using the following code: MainTheme.ThemeUri = new Uri("SilverlightApplication1;component/Themes/[ThemeName]/Theme.xaml", UriKind.Relative); This worked well, untill I found these themes: http://timheuer.com/blog/archive/2010/05/17/silverlight-4-tools-released-and-new-application-templates.aspx The difference is that these themes consist of multiple files. So I made a Theme.xaml file that only includes MergedDictionaries so I could still use the code above. This is the Theme.xaml file for the Cosmopolitan theme. <ResourceDictionary xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"> <ResourceDictionary.MergedDictionaries> <ResourceDictionary Source="CoreStyles.xaml"/> <ResourceDictionary Source="SDKStyles.xaml"/> <ResourceDictionary Source="Styles.xaml"/> <ResourceDictionary Source="ToolkitStyles.xaml"/> </ResourceDictionary.MergedDictionaries> </ResourceDictionary> However, when I run the c# code above I get the following exception: System.Windows.Markup.XamlParseException: Failed to assign to property 'System.Windows.ResourceDictionary.Source'. Just to be clear, using the MergedDictionaries method does work when I set it in my App.xaml: <Application.Resources> <ResourceDictionary> <ResourceDictionary.MergedDictionaries> <ResourceDictionary Source="Themes/Cosmopolitan/Theme.xaml"/> </ResourceDictionary.MergedDictionaries> </ResourceDictionary> </Application.Resources> What am I doing wrong? Thanks!

    Read the article

  • traversal of multiple separate web services in a ring network

    - by qkrsppopcmpt
    I am facing a design problem, here is some basic requirement: Aggregator 1. Separate service for blog,video,images and associations. 2. Each of the service should be completely separate, that means they run on separate tomcat. 3. And each aggregator must be able to query local database and other aggregators 4. Traversal of services must be asynchronous using a ring network. For example, we have a ring like ws1-ws2-ws3-ws4-ws1. Each node represents one type of one aggregator. The traveral goes in this way: the query from ws1 to ws2, and ws1 is waiting for the response from ws2 asynchronously; ws2 to ws3, also ws2 wait for ws3 asynchronously. If ws3 has the data, reply to ws2 then to ws1, then reply. However if ws3 goes away, the traversal should go back to ws2, then to ws1, then go to ws4, then go to ws3 again. then tells ws4 since ws3 fails. The required technology is axis2 and tomcat 6. Does anybody have any clue about it? If it is clear, I can clarify the question more clearly. Thanks very much.

    Read the article

  • Sending wordpress title-value across PHP-pages

    - by VoodooBurger
    I recently made this wordpress blog, where you can sign up a team for an event, when clicking a link under the event post. This link takes you to a sign-up form on another php-page. The link is added in the loop of the events-template like this: <?php query_posts('cat=8');?> <?php if (have_posts()) : while (have_posts()) : the_post(); ?> <div class="post" id="post-<?php the_ID(); ?>"> <h2><a href="<?php the_permalink() ?>"><?php the_title(); ?></a></h2> <div id="tilmeldknap"><?php wp_list_pages("title_li=&depth=1&include=63"); ?></div> <?php include (TEMPLATEPATH . '/inc/meta.php' ); ?>... So every upcoming event will have the same sign-up button. All I need now is to somehow send the specific event-post-title along to the sign-page, so that the following form-submit action will contain that title aswell. But since I'm not very good at php it seems like a mystery, altho I bet it's very simple! I'm guessing it's something like: $event=$_POST['single_post_title()'] But how to get the value to the next php-page I have no idea... please help, anyone :) An eksample can be seen throught this link: http://gadebold.dk/events/ The link sais: 'Tilmeld Hold'

    Read the article

  • Is it practical to program with your feet?

    - by bmm
    Has anyone tried using foot pedals in addition to the traditional keyboard and mouse combo to improve your effectiveness in the editor? Any actual experiences out there? Does it work, or is it just for carpal tunnel relief? I found one blog entry from a programmer who actually tried it: So now I can type using my feet for most of the modifier keys. I am using the pedals as I type this. I am still getting used to them, but the burning in my left wrist has definitely reduced. I think I can also type a little faster, but I am too lazy to do the speed tests with and without the pedals to verify this. On the negative side: Working out where to put your feet when you aren’t typing can be a little awkward. The pedals tend to move around the carpet, despite being metal and quite heavy. Some small spikes might have helped. Although the travel on the pedals is small, they are surprisingly stiff. Another programmer's experience: Anybody with hand pain must get foot pedals, since they can remove a tremendous load from your hands. I have two foot pedals, and use one for the SHIFT key, and the other for the CONTROL key. (I still type META by hand.) I have found that in the process of using the Emacs text editor to compose computer programs, I tend to use the SHIFT, CONTROL and META keys constantly, and it is easy to remove most of this load from one's hands. Some foot switch products: Savant Elite Triple Foot Switch FragPedal Bilbo Step On It!

    Read the article

  • Modify jQuery Highlight? Javascript Regex

    - by Matrym
    How can I modify jquery highlight such that it doesn't find matches that appear directly before or after an alpha character? In other words, how do I prevent a match mid-word? /* highlight v3 Highlights arbitrary terms. <http://johannburkard.de/blog/programming/javascript/highlight-javascript-text-higlighting-jquery-plugin.html> MIT license. Johann Burkard <http://johannburkard.de> <mailto:[email protected]> */ jQuery.fn.highlight = function(pat) { function innerHighlight(node, pat) { var skip = 0; if (node.nodeType == 3) { var pos = node.data.toUpperCase().indexOf(pat); if (pos >= 0) { var spannode = document.createElement('span'); spannode.className = 'highlight'; var middlebit = node.splitText(pos); var endbit = middlebit.splitText(pat.length); var middleclone = middlebit.cloneNode(true); spannode.appendChild(middleclone); middlebit.parentNode.replaceChild(spannode, middlebit); skip = 1; } } else if (node.nodeType == 1 && node.childNodes && !/(script|style)/i.test(node.tagName)) { for (var i = 0; i < node.childNodes.length; ++i) { i += innerHighlight(node.childNodes[i], pat); } } return skip; } return this.each(function() { innerHighlight(this, pat.toUpperCase()); }); }; jQuery.fn.removeHighlight = function() { return this.find("span.highlight").each(function() { this.parentNode.firstChild.nodeName; with (this.parentNode) { replaceChild(this.firstChild, this); normalize(); } }).end(); };

    Read the article

  • open source business intelligence solutions

    - by opensas
    which open source business intelligence solution would you recommend? All I need is to build some cubes and let the end user play with dimensions, filter data, sort, etc, and once it's done being able to export it to excel... I'd like the solution to be as simple and easy on resources as possible, and also I'd like it to be as much open source as possible, by the way. I've heard that many solutions available do have many restrictions when it comes to there community version. I'd like to ear your advices and the pros/cons of each alternative, to help me choose the right tool, and if you could point me to some basic demo and tutorial to get started. thanks a lot ps: I'm using sql server databases, they aren't huge databases (in general less than a million records) and I doesn't necessarily have to work on "live" data... ps: some useful links: http://en.wikipedia.org/wiki/Business_intelligence_tools#Open_source_free_products http://www.manageability.org/blog/stuff/open-source-java-business-intelligence http://www.jaspersoft.com/jasperanalysis http://community.pentaho.com/projects/bi_platform/ http://community.pentaho.com/faq/platform_licensing.php http://www.eclipse.org/birt/phoenix/ http://www.spagoworld.org/xwiki/bin/view/SpagoWorld/ http://docs.google.com/viewer?a=v&q=cache:vhsqMQXwCUkJ:www.ow2.org/xwiki/bin/download/Activities/EuropeLocalChapterWebinars/ELCWebinarOSBI.pdf+open+source+business+intelligence&hl=en&pid=bl&srcid=ADGEESgpJJ2MqaKprJQOF2jX2UXCZQjg_asv8d7EVYtq0Vma-e-tR1tFxS-I0SOW0IhJC5acYc94rkDOrgP1WckCp_vk4qhKqR9y2Klp_u9cL8hlXoKoUpMkpAd5wabu61A4W0y15E5P&sig=AHIEtbRJ5FAI-3YK-qtayPjKkF_CwOgZag

    Read the article

  • Subsonic 3 ActiveRecord nested select for NotIn bug?

    - by Junto
    I have the following Subsonic 3.0 query, which contains a nested NotIn query: public List<Order> GetRandomOrdersForNoReason(int shopId, int typeId) { // build query var q = new SubSonic.Query.Select().Top("1") .From("Order") .Where("ShopId") .IsEqualTo(shopId) .And(OrderTable.CustomerId).NotIn( new Subsonic.Query.Select("CustomerId") .From("Customer") .Where("TypeId") .IsNotEqualTo(typeId)) .OrderDesc("NewId()"); // Output query Debug.WriteLine(q.ToString()); // returned typed list return q.ExecuteTypedList<Order>(); } The internal query appears to be incorrect: SELECT TOP 1 * FROM [Order] WHERE ShopId = @0 AND CustomerId NOT IN (SELECT CustomerId FROM [Customer] WHERE TypeId = @0) ORDER BY NewId() ASC You'll notice that both parameters are @0. I'm assuming that the parameters are enumerated (starting at zero), for each "new" Select query. However, in this case where the two Select queries are nested, I would have expected the output to have two parameters named @0 and @1. My query is based on one that Rob Conery gave on his blog as a preview of the "Pakala" query tool that became Subsonic 3. His example was: int records = new Select(Northwind.Product.Schema) .Where("productid") .In( new Select("productid").From(Northwind.Product.Schema) .Where("categoryid").IsEqualTo(5) ) .GetRecordCount(); Has anyone else seen this behavior? Is it a bug, or is this an error or my part? Since I'm new to Subsonic I'm guessing that this probably programmer error on my part but I'd like confirmation if possible.

    Read the article

  • Is there a standard mapping between JSON and Protocol Buffers?

    - by Daniel Earwicker
    From a comment on the announcement blog post: Regarding JSON: JSON is structured similarly to Protocol Buffers, but protocol buffer binary format is still smaller and faster to encode. JSON makes a great text encoding for protocol buffers, though -- it's trivial to write an encoder/decoder that converts arbitrary protocol messages to and from JSON, using protobuf reflection. This is a good way to communicate with AJAX apps, since making the user download a full protobuf decoder when they visit your page might be too much. It may be trivial to cook up a mapping, but is there a single "obvious" mapping between the two that any two separate dev teams would naturally settle on? If two products supported PB data and could interoperate because they shared the same .proto spec, I wonder if they would still be able to interoperate if they independently introduced a JSON reflection of the same spec. There might be some arbitrary decisions to be made, e.g. should enum values be represented by a string (to be human-readable a la typical JSON) or by their integer value? So is there an established mapping, and any open source implementations for generating JSON encoder/decoders from .proto specs?

    Read the article

  • Weird Issues with WPMU I Can't Figure Out

    - by HollerTrain
    I know I should post this on the WPMU forum, but no one writes me back and I'm just trying to find a larger audience hoping you have run into this issue as well. I have built a WPMU site for a client, and I am able to upload media into the Media Library and within a Post or Page perfectly. I thought my job was finished, yet the client can't upload any media at all. I'm located in Kentucky, they are located in New England (if that even matters). I had the client record their process of uploading as I thought they were simply not following my instructions for uploading, yet they are doing everything correctly. When uploading a file it goes through the process of allowing them to select a file and it says it uploads it, yet when it is finished uploading nothing is in the Media Library or in the Post. Video of the client trying to upload in Media Manager (http://www.screencast.com/users/CatherineWeber/folders/Jing/media/945d33fa-a752-45fd-9bc1-f76fc5a1814a) Video of the client trying to upload within a Post (http://www.screencast.com/users/CatherineWeber/folders/Jing/media/b5c60e25-f0b5-40c0-a820-c2fc9eb00906) Asking the client to disable Flash Uploader didn't work :( Yet, I can login to the WPMU site, access their blog's backend and can easily upload a ton of files. I am so lost at to what the issue is here. I am running version 2.8.4a, and will try to upgrade to latest release hoping this will fix things.

    Read the article

  • calling asp.net mvc action method using jquery post method expires the session

    - by nccsbim071
    hi, i have a website where i provicde a link. On clicking the link a controller action method is called to generate a zip file after creation of zip file is done, i show the link to download the zip file by replacing the link to create a zip with the link to download the zip. the problem is that after zip file creation is over and link is shown, when user clicks on the link to download the zip file, they are sent to login. After providing correct credentials in the login page they are prompted to download the zip file. they sould not be sent to the login page. In the action to generate zip file i haven't abondoned the session or haven't not done anything that abondons the session. the user should not be sen't to login page after successful creation of zip file user should be able to download the file without login. i search internet on this problem, but i did not find any solution. In one of the blog written by hanselman i found this statement that creates the problem with the session: Is some other thing like an Ajax call or IE's Content Advisor simultaneously hitting the default page or login page and causing a race condition that calls Session.Abandon? (It's happened before!) so i thought there might be some problem with ajax call that causes the session to expire, but i don't know what is happening? any help please thanks

    Read the article

< Previous Page | 348 349 350 351 352 353 354 355 356 357 358 359  | Next Page >