Search Results

Search found 40644 results on 1626 pages for 'ms access 2003'.

Page 352/1626 | < Previous Page | 348 349 350 351 352 353 354 355 356 357 358 359  | Next Page >

  • How to access XAMPP virtual hosts from iPad on local network?

    - by martin's
    Using XAMPP on one machine. Multiple virtual hosts defined. One per project. Format is .local For example: apple.local microsoft.local client-site.local our-own-internal-site.local All works perfectly from that one machine. I now want to have other systems within the network access the various sites. The main reason for wanting to do this is to be able to test site functionality and layout from mobile devices without having to upload partial work to public servers. I can access the main XAMPP default site by simply entering the IP address of the XAMPP machine in, say, Safari on an iPad. However, there is no way to reach .local that I can see. Would this entail setting up a DNS server within the network? We have a mixture of Windows and Mac machines. No Linux. The XAMPP machine is Vista 64. I don't want real external internet access to be affected in any way, just ".local" pointed to the XAMPP machine if that makes sense.

    Read the article

  • Can I install windows on an SSD and access data from my old windows HDD?

    - by nzifnab
    I purchased new computer components, switching my hardware from AMD and Radeon to Intel and Nvidia. I kept components from my old computer like the powersupply and two HDDs. Everything appeared to install correctly and the system booted into the BIOS just fine (after a brief snafu with the CPU fan). My goal was to use the two harddrives and just be able to turn on the computer and load up my old windows install with all the files, programs, and documents. I expected to have to call Microsoft to re-register the windows install for the new hardware (since I had to do that last time I upgraded w/ the same windows version). When the computer attempts to boot into windows it briefly flashes a bluescreen and then restarts. System recovery gives a message something like "BadDriver Failover" something something. I assume this is because it's trying to use amd drivers for an intel chipset (or something...?) and I've been as-yet unsuccessful in getting it to boot into my old windows partition. SO! I decided eff it, maybe I'll go visit my nearest Micro Center and buy a 200 GB SSD, install windows onto that, and then... be able to access just the contents of both of my other harddrives? I don't intend on running any of the programs but there were some saved files I would like to salvage from the 500 GB harddrive, The 1.5 TB harddrive only had files on it, no OS or applications so I'd also expect to still be able to access it. Is this possible? Can I install the SSD and only format/install windows onto it and still access the contents from my two transferred-over drives?

    Read the article

  • How do I restrict access to certain web files/folders on an IIS 7.5 based web server?

    - by cpuguru
    We're moving a website that was previously hosted on Win2k3 & IIS 6 to a Win2k8 R2 & IIS 7.5 platform. The website is public, but we want to restrict anonymous access to certain files and folders such that the user would be prompted for a password to access them. If this were Apache, a simple .htaccess file would serve the purpose. However, since it's IIS 7.5 and we're serving up mainly static HTML files and a few classic ASP pages I'm in a bit of a quandry as to how to restrict access to individual files and folders for various committees such that attempts to committee_1's files and/or folders would prompt the user for a password and, if entered correctly, would serve up their files. Same thing for committee_2 and so on. Under IIS 6, we would take away the read privileges for IIS_IUSRS and create a user called "committee_1" with a password known by the group and give that user read privileges to the files/folders. There's got to be a better (and more secure) way. Reminder, these are not *.aspx pages that are being served up. Any suggestions on how to password protect key files and/or folders under IIS 7.5 are much appreciated.

    Read the article

  • VLAN across a router to give wireless access to remote sites?

    - by Don
    I've been looking online for this answer, but getting conflicting information. I was under the impression that you couldn't use a VLAN across a router, but maybe it's possible (according to some documentation I see online)? I was hoping someone could clear it up for me. Here's what I'm working with: We have a remote site with a handful of users. We recently gave them an access point (Cisco 1142n) for internal wireless. It's plugged into a switch and working fine (getting IPs from the same DHCP scope as the wired users are getting). Private wireless is set on VL50. At the home office we have private wireless for our internal network working and on VL50, with a test VLAN setup for VL60, which points to our DSL line for the time being. Both private and public wireless works fine internally (not crossing a router). VL50 is named the same at both sites for consistency in naming. If we wanted to give the remote site access to the public wireless (VL60), would that be possible across the routers? For more information, currently the site is connected to the home office via a T1 connection, Cisco routers on both ends. I didn't think it was possible due to the nature of VLANS being layer 2. But, I am from from an expert on this and would appreciate any instruction as to the actual truth of the matter. The end result I'm going for is, how to get our remote sites access to a public (outside) connection along with their private connection, without actually having a DSL (or similar type line) dropped at their location? Thanks in advance for your thoughts.

    Read the article

  • Folder doesn't show up in explorer, cmd, and python even though I can access it, how can I fix this?

    - by Miebster
    I am accessing another computer on the network using a mapped network drive. The path looks like \\192.168.0.100\d$ which is mapped to my computer's "m" drive. I can access, view, create, delete, move, etc folders on this drive. However, some folders don't show up in windows explorer, even tho I can access them. Example: Lets say that M:\stuff\more_stuff is a directory. What I can't do: When windows explorer is pointed at M:\stuff I can't see more_stuff In cmd prompt pointed at M:\stuff "dir" doesn't find more_stuff In cmd prompt pointed at M:\stuff "dir /a" doens't find more_stuff In python, os.listdir at M:\stuff doens't find more_stuff What I can do: Typing M:\stuff\more_stuff into the address bar lets me access the folder like normal. Because there is no indication that this folder even exists, there could be more like them. I have no way of knowing how many folders are magically hidden on this mapped drive. What are some steps I can do to figure out why this folder is hidden? (With the end goal of making it no longer hidden).

    Read the article

  • HELP: MS Virtual Disk Service to Access Volumes and Discs on Local Machine.

    - by Jibran Ahmed
    Hi, here it is my code through which I am successfully initialize the VDS service and get the Packs but When I call QueryVolumes on IVdsPack Object, I am able to get IEnumVdsObjects but unable to get IUnknown* array through IEnumVdsObject::Next method, it reutrns S_FALSE with IUnkown* = NULL. So this IUnknown* cant be used to QueryInterface for IVdsVolume Below is my code HRESULT hResult; IVdsService* pService = NULL; IVdsServiceLoader *pLoader = NULL; //Launch the VDS Service hResult = CoInitialize(NULL); if( SUCCEEDED(hResult) ) { hResult = CoCreateInstance( CLSID_VdsLoader, NULL, CLSCTX_LOCAL_SERVER, IID_IVdsServiceLoader, (void**) &pLoader ); //if succeeded load VDS on local machine if( SUCCEEDED(hResult) ) pLoader->LoadService(NULL, &pService); //Done with Loader now release VDS Loader interface _SafeRelease(pLoader); if( SUCCEEDED(hResult) ) { hResult = pService->WaitForServiceReady(); if ( SUCCEEDED(hResult) ) { AfxMessageBox(L"VDS Service Loaded"); IEnumVdsObject* pEnumVdsObject = NULL; hResult = pService->QueryProviders(VDS_QUERY_SOFTWARE_PROVIDERS, &pEnumVdsObject); IUnknown* ppObjUnk ; IVdsSwProvider* pVdsSwProvider = NULL; IVdsPack* pVdsPack = NULL; IVdsVolume* pVdsVolume = NULL; ULONG ulFetched = 0; hResult = E_INVALIDARG; while(!SUCCEEDED(hResult)) { hResult = pEnumVdsObject->Next(1, &ppObjUnk, &ulFetched); hResult = ppObjUnk->QueryInterface(IID_IVdsSwProvider, (void**)&pVdsSwProvider); if(!SUCCEEDED(hResult)) _SafeRelease(ppObjUnk); } _SafeRelease(pEnumVdsObject); _SafeRelease(ppObjUnk); hResult = pVdsSwProvider->QueryPacks(&pEnumVdsObject); hResult = E_INVALIDARG; while(!SUCCEEDED(hResult)) { hResult = pEnumVdsObject->Next(1, &ppObjUnk, &ulFetched); hResult = ppObjUnk->QueryInterface(IID_IVdsPack, (void**)&pVdsPack); if(!SUCCEEDED(hResult)) _SafeRelease(ppObjUnk); } _SafeRelease(pEnumVdsObject); _SafeRelease(ppObjUnk); hResult = pVdsPack->QueryVolumes(&pEnumVdsObject); pEnumVdsObject->Reset(); hResult = E_INVALIDARG; ulFetched = 0; BOOL bDone = FALSE; while(!SUCCEEDED(hResult)) { hResult = pEnumVdsObject->Next(1, &ppObjUnk, &ulFetched); //hResult = ppObjUnk->QueryInterface(IID_IVdsVolume, (void**)&pVdsVolume); if(!SUCCEEDED(hResult)) _SafeRelease(ppObjUnk); } _SafeRelease(pEnumVdsObject); _SafeRelease(ppObjUnk); _SafeRelease(pVdsPack); _SafeRelease(pVdsSwProvider); // hResult = pVdsVolume-AddAccessPath(TEXT("G:\")); if(SUCCEEDED(hResult)) AfxMessageBox(L"Add Access Path Successfully"); else AfxMessageBox(L"Unable to Add access path"); //UUID of IVdsVolumeMF {EE2D5DED-6236-4169-931D-B9778CE03DC6} static const GUID GUID_IVdsVolumeMF = {0xEE2D5DED, 0x6236, 4169,{0x93, 0x1D, 0xB9, 0x77, 0x8C, 0xE0, 0x3D, 0XC6} }; hResult = pService->GetObject(GUID_IVdsVolumeMF, VDS_OT_VOLUME, &ppObjUnk); if(hResult == VDS_E_OBJECT_NOT_FOUND) AfxMessageBox(L"Object Not found"); if(hResult == VDS_E_INITIALIZED_FAILED) AfxMessageBox(L"Initialization failed"); // pVdsVolume = reinterpret_cast(ppObjUnk); if(SUCCEEDED(hResult)) { // hResult = pVdsVolume-AddAccessPath(TEXT("G:\")); if(SUCCEEDED(hResult)) { IVdsAsync* ppVdsSync; AfxMessageBox(L"Formatting is about to Start......"); // hResult = pVdsVolume-Format(VDS_FST_UDF, TEXT("UDF_FORMAT_TEST"), 2048, TRUE, FALSE, FALSE, &ppVdsSync); if(SUCCEEDED(hResult)) AfxMessageBox(L"Formatting Started......."); else AfxMessageBox(L"Formatting Failed"); } else AfxMessageBox(L"Unable to Add Access Path"); } _SafeRelease(pVdsVolume); } else { AfxMessageBox(L"VDS Service Cannot be Loaded"); } } } _SafeRelease(pService);

    Read the article

  • How do you get - Better than 1024x768 Driver for 64 bit Dell PowerEdge Server

    - by tinyJoe
    How do you get better than 1024x768 resolution? Just installed MS Server 2008 64bit on a Dell PowerEdge 64bit box (works OK - Previously running MS Server 2003 32bit) After install - gives a a max resultion of 1024x768 I want to change the reslution to 1280x1024 (Same LCD Worked OK on server 2003) When I down load a driver I get a messeage "Radeon 7000 does not recognise driver" Also have Have a new LG W1042 I'd like to use. This goes up to 1440

    Read the article

  • Apache2 benchmarks - very poor performance

    - by andrzejp
    I have two servers on which I test the configuration of apache2. The first server: 4GB of RAM, AMD Athlon (tm) 64 X2 Dual Core Processor 5600 + Apache 2.2.3, mod_php, mpm prefork: Settings: Timeout 100 KeepAlive On MaxKeepAliveRequests 150 KeepAliveTimeout 4 <IfModule Mpm_prefork_module> StartServers 7 MinSpareServers 15 MaxSpareServers 30 MaxClients 250 MaxRequestsPerChild 2000 </ IfModule> Compiled in modules: core.c mod_log_config.c mod_logio.c prefork.c http_core.c mod_so.c Second server: 8GB of RAM, Intel (R) Core (TM) i7 CPU [email protected] Apache 2.2.9, **fcgid, mpm worker, suexec** PHP scripts are running via fcgi-wrapper Settings: Timeout 100 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 4 <IfModule Mpm_worker_module> StartServers 10 MaxClients 200 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 1000 </ IfModule> Compiled in modules: core.c mod_log_config.c mod_logio.c worker.c http_core.c mod_so.c The following test results, which are very strange! New server (dynamic content - php via fcgid+suexec): Server Software: Apache/2.2.9 Server Hostname: XXXXXXXX Server Port: 80 Document Path: XXXXXXX Document Length: 179512 bytes Concurrency Level: 10 Time taken for tests: 0.26276 seconds Complete requests: 1000 Failed requests: 0 Total transferred: 179935000 bytes HTML transferred: 179512000 bytes Requests per second: 38.06 Transfer rate: 6847.88 kb/s received Connnection Times (ms) min avg max Connect: 2 4 54 Processing: 161 257 449 Total: 163 261 503 Old server (dynamic content - mod_php): Server Software: Apache/2.2.3 Server Hostname: XXXXXX Server Port: 80 Document Path: XXXXXX Document Length: 187537 bytes Concurrency Level: 10 Time taken for tests: 173.073 seconds Complete requests: 1000 Failed requests: 22 (Connect: 0, Length: 22, Exceptions: 0) Total transferred: 188003372 bytes HTML transferred: 187546372 bytes Requests per second: 5777.91 Transfer rate: 1086267.40 kb/s received Connnection Times (ms) min avg max Connect: 3 3 28 Processing: 298 1724 26615 Total: 301 1727 26643 Old server: Static content (jpg file) Server Software: Apache/2.2.3 Server Hostname: xxxxxxxxx Server Port: 80 Document Path: /images/top2.gif Document Length: 40486 bytes Concurrency Level: 100 Time taken for tests: 3.558 seconds Complete requests: 1000 Failed requests: 0 Write errors: 0 Total transferred: 40864400 bytes HTML transferred: 40557482 bytes Requests per second: 281.09 [#/sec] (mean) Time per request: 355.753 [ms] (mean) Time per request: 3.558 [ms] (mean, across all concurrent requests) Transfer rate: 11217.51 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 3 11 4.5 12 23 Processing: 40 329 61.4 339 1009 Waiting: 6 282 55.2 293 737 Total: 43 340 63.0 351 1020 New server - static content (jpg file) Server Software: Apache/2.2.9 Server Hostname: XXXXX Server Port: 80 Document Path: /images/top2.gif Document Length: 40486 bytes Concurrency Level: 100 Time taken for tests: 3.571531 seconds Complete requests: 1000 Failed requests: 0 Write errors: 0 Total transferred: 41282792 bytes HTML transferred: 41030080 bytes Requests per second: 279.99 [#/sec] (mean) Time per request: 357.153 [ms] (mean) Time per request: 3.572 [ms] (mean, across all concurrent requests) Transfer rate: 11287.88 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 2 63 24.8 66 119 Processing: 124 278 31.8 282 391 Waiting: 3 70 28.5 66 164 Total: 126 341 35.9 350 443 I noticed that in the apache error.log is a lot of entries: [notice] mod_fcgid: call /www/XXXXX/public_html/forum/index.php with wrapper /www/php-fcgi-scripts/XXXXXX/php-fcgi-starter What I have omitted, or do not understand? Such a difference in requests per second? Is it possible? What could be the cause?

    Read the article

  • ASPNET WMI class not available

    - by Nexus
    I need to extract the ASPNET\Requests Queued performance counter from some IIS servers via WMI. The WMI class for this sort of thing appears to be contained in Win32_PerfFormattedData_ASPNET_ASPNET. I've queried all available classes in root\cimv2 on my Win 2003/IIS6 servers, and it's not listed. It is, however, available on an unrelated Win2008/IIS7 box (which is interesting but doesn't really help me much) What gives? Why is this WMI class not available on my Windows 2003 servers?

    Read the article

  • Adding a 2008 R2 DC to a SBS2003 R2 domain

    - by ITGuy24
    I am planning on adding a Windows Server 2008 R2 box as a second domain controller for a client running an SBS 2003 R2 domain and have two questions. Are there any "gotchya's" involved in doing this, or do I just run ad and forest prep, promote the 2008 R2 box? How would CALs work with this setup? Would I need SBS 2008 CALs, Server 2008 CALs or would the old SBS 2003 CALs cover this setup? My thinking is I will only need Server 2008 CALs

    Read the article

  • Gateway on a virtual network interface used by LXC guests

    - by linkdd
    I'm currently having some problems with configuring a gateway for a virtual network interface. Here is what I've done : I created a virtual network interface : # brctl addbr lxc0 # brctl setfd lxc0 0 # ifconfig lxc0 192.168.0.1 promisc up # route add -net default gw 192.168.0.1 lxc0 The output of ifconfig gave me what I wanted : lxc0 Link encap:Ethernet HWaddr 22:4f:e4:40:89:bb inet adr:192.168.0.1 Bcast:192.168.0.255 Masque:255.255.255.0 adr inet6: fe80::88cf:d4ff:fe47:3b6b/64 Scope:Lien UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:623 errors:0 dropped:0 overruns:0 frame:0 TX packets:7412 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:50329 (49.1 KiB) TX bytes:335738 (327.8 KiB) I configured dnsmasq to provide a DNS server (using the default : 192.168.1.1) and a DHCP server. Then, my LXC guest is configured like this : lxc.network.type=veth lxc.network.link=lxc0 lxc.network.flags=up Every thing is working perfectly, my containers have an IP (192.168.0.57 and 192.168.0.98). I can ping the host and the containers from the containers and from the host : (host)# ping -c 3 192.168.0.114 PING 192.168.0.114 (192.168.0.114) 56(84) bytes of data. 64 bytes from 192.168.0.114: icmp_req=1 ttl=64 time=0.044 ms 64 bytes from 192.168.0.114: icmp_req=2 ttl=64 time=0.038 ms 64 bytes from 192.168.0.114: icmp_req=3 ttl=64 time=0.043 ms --- 192.168.0.114 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1998ms rtt min/avg/max/mdev = 0.038/0.041/0.044/0.007 ms (guest)# ping -c 3 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. 64 bytes from 192.168.0.1: icmp_req=1 ttl=64 time=0.048 ms 64 bytes from 192.168.0.1: icmp_req=2 ttl=64 time=0.042 ms 64 bytes from 192.168.0.1: icmp_req=3 ttl=64 time=0.042 ms --- 192.168.0.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 0.042/0.044/0.048/0.003 ms Now, it's time to configure the host as a gateway for the network 192.168.0.0/24 : #!/bin/sh # Clear rules iptables -F iptables -t nat -F iptables -t mangle -F iptables -X iptables -A FORWARD -i lxc0 -o eth0 -j ACCEPT iptables -A FORWARD -i eth0 -o lxc0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE echo 1 > /proc/sys/net/ipv4/ip_forward The final test failed completely, ping the outside : (guest)# ping -c 3 google.fr PING google.fr (173.194.67.94) 56(84) bytes of data. From 192.168.0.1: icmp_seq=3 Redirect Host(New nexthop: wi-in-f94.1e100.net (173.194.67.94)) From 192.168.0.1 icmp_seq=1 Destination Host Unreachable From 192.168.0.1 icmp_seq=2 Destination Host Unreachable From 192.168.0.1 icmp_seq=3 Destination Host Unreachable --- google.fr ping statistics --- 3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2017ms Did I missed something ?

    Read the article

  • Hotfix entries in event log

    - by Marco Shaw
    Server 2008/2008 R2 I'm trying to remotely monitor these servers to watch the progress of hotfixes being installed. I was able to find this in Server 2003/2003 R2: -Log: System -Source: NtServicePack It seems the above event is written when every hotfix is installed. I can't seem to find a comparable entry in Server 2008/2008 R2 though. Is there anything similar that I can easily monitor for remotely?

    Read the article

  • How to connect to a Virtualbox guest from the host when network cable unplugged

    - by Greg K
    I'd like to work offline (I'm flying to the US twice this month), to do this I need access to a linux development server. When I work from home I boot a VirtualBox VM and that acts as my dev server for the day (providing Apache, PHP & MySQL to run my server side code). However, I'd like to work with my VM when I'm not connected to a network. I have my Ubuntu VM guest set up with a bridge connection so it can serve HTTP and provide SSH access from inside my local network. I've tried to manually configure my network settings on both Mac OSX (the host) and Ubuntu (the guest) but I can't even ping my own NIC address (127.0.0.1 can, 192.168.21.x I can't) in OS X when I unplug the cable. Manual network settings: $ ifconfig en0 en0: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether 00:xx:xx:xx:xx:xx inet 192.168.21.5 netmask 0xffffff00 broadcast 192.168.21.255 media: autoselect (100baseTX <full-duplex,flow-control>) status: active I can ping localhost fine, as well as my VM (.20) and SSH too. $ ping 192.168.21.5 PING 192.168.21.5 (192.168.21.5): 56 data bytes 64 bytes from 192.168.21.5: icmp_seq=0 ttl=64 time=0.085 ms 64 bytes from 192.168.21.5: icmp_seq=1 ttl=64 time=0.102 ms 64 bytes from 192.168.21.5: icmp_seq=2 ttl=64 time=0.100 ms 64 bytes from 192.168.21.5: icmp_seq=3 ttl=64 time=0.094 ms $ ping 192.168.21.20 PING 192.168.21.20 (192.168.21.20): 56 data bytes 64 bytes from 192.168.21.20: icmp_seq=0 ttl=64 time=0.910 ms 64 bytes from 192.168.21.20: icmp_seq=1 ttl=64 time=1.181 ms 64 bytes from 192.168.21.20: icmp_seq=2 ttl=64 time=1.159 ms 64 bytes from 192.168.21.20: icmp_seq=3 ttl=64 time=1.320 ms Network cable unplugged: $ ifconfig en0 en0: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether 00:xx:xx:xx:xx:xx media: autoselect status: inactive $ ping 192.168.21.5 PING 192.168.21.5 (192.168.21.5): 56 data bytes ping: sendto: No route to host ping: sendto: No route to host Request timeout for icmp_seq 0 ping: sendto: No route to host Request timeout for icmp_seq 1 Does OS X disable the NIC when the network cable is unplugged? Any way to stop it doing this?

    Read the article

  • Troubleshooting latency spikes on ESXi NFS datastores

    - by exo_cw
    I'm experiencing fsync latencies of around five seconds on NFS datastores in ESXi, triggered by certain VMs. I suspect this might be caused by VMs using NCQ/TCQ, as this does not happen with virtual IDE drives. This can be reproduced using fsync-tester (by Ted Ts'o) and ioping. For example using a Grml live system with a 8GB disk: Linux 2.6.33-grml64: root@dynip211 /mnt/sda # ./fsync-tester fsync time: 5.0391 fsync time: 5.0438 fsync time: 5.0300 fsync time: 0.0231 fsync time: 0.0243 fsync time: 5.0382 fsync time: 5.0400 [... goes on like this ...] That is 5 seconds, not milliseconds. This is even creating IO-latencies on a different VM running on the same host and datastore: root@grml /mnt/sda/ioping-0.5 # ./ioping -i 0.3 -p 20 . 4096 bytes from . (reiserfs /dev/sda): request=1 time=7.2 ms 4096 bytes from . (reiserfs /dev/sda): request=2 time=0.9 ms 4096 bytes from . (reiserfs /dev/sda): request=3 time=0.9 ms 4096 bytes from . (reiserfs /dev/sda): request=4 time=0.9 ms 4096 bytes from . (reiserfs /dev/sda): request=5 time=4809.0 ms 4096 bytes from . (reiserfs /dev/sda): request=6 time=1.0 ms 4096 bytes from . (reiserfs /dev/sda): request=7 time=1.2 ms 4096 bytes from . (reiserfs /dev/sda): request=8 time=1.1 ms 4096 bytes from . (reiserfs /dev/sda): request=9 time=1.3 ms 4096 bytes from . (reiserfs /dev/sda): request=10 time=1.2 ms 4096 bytes from . (reiserfs /dev/sda): request=11 time=1.0 ms 4096 bytes from . (reiserfs /dev/sda): request=12 time=4950.0 ms When I move the first VM to local storage it looks perfectly normal: root@dynip211 /mnt/sda # ./fsync-tester fsync time: 0.0191 fsync time: 0.0201 fsync time: 0.0203 fsync time: 0.0206 fsync time: 0.0192 fsync time: 0.0231 fsync time: 0.0201 [... tried that for one hour: no spike ...] Things I've tried that made no difference: Tested several ESXi Builds: 381591, 348481, 260247 Tested on different hardware, different Intel and AMD boxes Tested with different NFS servers, all show the same behavior: OpenIndiana b147 (ZFS sync always or disabled: no difference) OpenIndiana b148 (ZFS sync always or disabled: no difference) Linux 2.6.32 (sync or async: no difference) It makes no difference if the NFS server is on the same machine (as a virtual storage appliance) or on a different host Guest OS tested, showing problems: Windows 7 64 Bit (using CrystalDiskMark, latency spikes happen mostly during preparing phase) Linux 2.6.32 (fsync-tester + ioping) Linux 2.6.38 (fsync-tester + ioping) I could not reproduce this problem on Linux 2.6.18 VMs. Another workaround is to use virtual IDE disks (vs SCSI/SAS), but that is limiting performance and the number of drives per VM. Update 2011-06-30: The latency spikes seem to happen more often if the application writes in multiple small blocks before fsync. For example fsync-tester does this (strace output): pwrite(3, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"..., 1048576, 0) = 1048576 fsync(3) = 0 ioping does this while preparing the file: [lots of pwrites] pwrite(3, "********************************"..., 4096, 1036288) = 4096 pwrite(3, "********************************"..., 4096, 1040384) = 4096 pwrite(3, "********************************"..., 4096, 1044480) = 4096 fsync(3) = 0 The setup phase of ioping almost always hangs, while fsync-tester sometimes works fine. Is someone capable of updating fsync-tester to write multiple small blocks? My C skills suck ;) Update 2011-07-02: This problem does not occur with iSCSI. I tried this with the OpenIndiana COMSTAR iSCSI server. But iSCSI does not give you easy access to the VMDK files so you can move them between hosts with snapshots and rsync. Update 2011-07-06: This is part of a wireshark capture, captured by a third VM on the same vSwitch. This all happens on the same host, no physical network involved. I've started ioping around time 20. There were no packets sent until the five second delay was over: No. Time Source Destination Protocol Info 1082 16.164096 192.168.250.10 192.168.250.20 NFS V3 WRITE Call (Reply In 1085), FH:0x3eb56466 Offset:0 Len:84 FILE_SYNC 1083 16.164112 192.168.250.10 192.168.250.20 NFS V3 WRITE Call (Reply In 1086), FH:0x3eb56f66 Offset:0 Len:84 FILE_SYNC 1084 16.166060 192.168.250.20 192.168.250.10 TCP nfs > iclcnet-locate [ACK] Seq=445 Ack=1057 Win=32806 Len=0 TSV=432016 TSER=769110 1085 16.167678 192.168.250.20 192.168.250.10 NFS V3 WRITE Reply (Call In 1082) Len:84 FILE_SYNC 1086 16.168280 192.168.250.20 192.168.250.10 NFS V3 WRITE Reply (Call In 1083) Len:84 FILE_SYNC 1087 16.168417 192.168.250.10 192.168.250.20 TCP iclcnet-locate > nfs [ACK] Seq=1057 Ack=773 Win=4163 Len=0 TSV=769110 TSER=432016 1088 23.163028 192.168.250.10 192.168.250.20 NFS V3 GETATTR Call (Reply In 1089), FH:0x0bb04963 1089 23.164541 192.168.250.20 192.168.250.10 NFS V3 GETATTR Reply (Call In 1088) Directory mode:0777 uid:0 gid:0 1090 23.274252 192.168.250.10 192.168.250.20 TCP iclcnet-locate > nfs [ACK] Seq=1185 Ack=889 Win=4163 Len=0 TSV=769821 TSER=432716 1091 24.924188 192.168.250.10 192.168.250.20 RPC Continuation 1092 24.924210 192.168.250.10 192.168.250.20 RPC Continuation 1093 24.924216 192.168.250.10 192.168.250.20 RPC Continuation 1094 24.924225 192.168.250.10 192.168.250.20 RPC Continuation 1095 24.924555 192.168.250.20 192.168.250.10 TCP nfs > iclcnet_svinfo [ACK] Seq=6893 Ack=1118613 Win=32625 Len=0 TSV=432892 TSER=769986 1096 24.924626 192.168.250.10 192.168.250.20 RPC Continuation 1097 24.924635 192.168.250.10 192.168.250.20 RPC Continuation 1098 24.924643 192.168.250.10 192.168.250.20 RPC Continuation 1099 24.924649 192.168.250.10 192.168.250.20 RPC Continuation 1100 24.924653 192.168.250.10 192.168.250.20 RPC Continuation 2nd Update 2011-07-06: There seems to be some influence from TCP window sizes. I was not able to reproduce this problem using FreeNAS (based on FreeBSD) as a NFS server. The wireshark captures showed TCP window updates to 29127 bytes in regular intervals. I did not see them with OpenIndiana, which uses larger window sizes by default. I can no longer reproduce this problem if I set the following options in OpenIndiana and restart the NFS server: ndd -set /dev/tcp tcp_recv_hiwat 8192 # default is 128000 ndd -set /dev/tcp tcp_max_buf 1048575 # default is 1048576 But this kills performance: Writing from /dev/zero to a file with dd_rescue goes from 170MB/s to 80MB/s. Update 2011-07-07: I've uploaded this tcpdump capture (can be analyzed with wireshark). In this case 192.168.250.2 is the NFS server (OpenIndiana b148) and 192.168.250.10 is the ESXi host. Things I've tested during this capture: Started "ioping -w 5 -i 0.2 ." at time 30, 5 second hang in setup, completed at time 40. Started "ioping -w 5 -i 0.2 ." at time 60, 5 second hang in setup, completed at time 70. Started "fsync-tester" at time 90, with the following output, stopped at time 120: fsync time: 0.0248 fsync time: 5.0197 fsync time: 5.0287 fsync time: 5.0242 fsync time: 5.0225 fsync time: 0.0209 2nd Update 2011-07-07: Tested another NFS server VM, this time NexentaStor 3.0.5 community edition: Shows the same problems. Update 2011-07-31: I can also reproduce this problem on the new ESXi build 4.1.0.433742.

    Read the article

  • KMS host setup: Windows 8 and Server 2012 support

    - by Chadddada
    As our client computer team is in the process of creating some Windows 8 images I have been charged with the setup of the KMS host to support this OS. I do currently run a 2003 KMS host that serves Office 2010, Server 2008, and Windows 7. However from looking at this Technet page it would seem that I cannot install Windows 8 or Server 2012 KMS host services on Server 2003. Am I reading that correctly?

    Read the article

  • How to know when the kernel was last compiled?

    - by Mehmet Tuncal
    I have installed a linux distro and I "think" it is vulnerable to kernel exploits. I have to update kernel but I need to know if it is really compiled in year 2003? How can I know if additional updates are made to the kernel? Linux gandalf 2.4.21-4.ELsmp #1 SMP Fri Oct 3 17:52:56 EDT 2003 i686 i686 i386 GNU/Linux Does also "smp" mean that it is safe from latest threats or something? Thank you.

    Read the article

  • RHEL 6.x on Rackspace Cloud and Dedicated hardware experiencing Redis Timeouts

    - by zhallett
    I just recently set up a mixture of RHEL 6.1 Rackspace cloud hosts and RHEL 6.2 dedicated hosts using Rackconnect. I am experiencing intermittent Redis timeouts from within our Rails 3.2.8 app with Redis 2.4.16 running on the RHEL 6.2 dedicated hosts. There is no network latency or packet loss. Also there are no errors on any interfaces on our cloud or dedicated servers or on the managed firewall from Rackspace. When Redis timesout, there is nothing logged within redis even though it is set up to do debug logging. The only error we receive is from Airbrake saying there was a Redis timeout. Network topology: RHEL 6.1 cloud hosts <--> Alert logic IDS <--> Cisco ASA 5510 <--> RHEL 6.2 dedicated hosts (web nodes) (two way NAT) (db hosts running redis) Ping from db host to web host: 64 bytes from 10.181.230.180: icmp_seq=998 ttl=64 time=0.520 ms 64 bytes from 10.181.230.180: icmp_seq=999 ttl=64 time=0.579 ms 64 bytes from 10.181.230.180: icmp_seq=1000 ttl=64 time=0.482 ms --- web1.xxxxxx.com ping statistics --- 1000 packets transmitted, 1000 received, 0% packet loss, time 999007ms rtt min/avg/max/mdev = 0.359/0.535/5.684/0.200 ms Ping from web host to db host: 64 bytes from 192.168.100.26: icmp_seq=998 ttl=64 time=0.544 ms 64 bytes from 192.168.100.26: icmp_seq=999 ttl=64 time=0.452 ms 64 bytes from 192.168.100.26: icmp_seq=1000 ttl=64 time=0.529 ms --- data1.xxxxxx.com ping statistics --- 1000 packets transmitted, 1000 received, 0% packet loss, time 999017ms rtt min/avg/max/mdev = 0.358/0.499/6.120/0.201 ms Redis config: daemonize yes pidfile /var/run/redis/6379/redis_6379.pid port 6379 timeout 0 loglevel debug logfile /var/lib/redis/log syslog-enabled yes syslog-ident redis-6379 syslog-facility local0 databases 16 save 900 1 save 300 10 save 60 10000 rdbcompression yes dbfilename dump-6379.rdb dir /var/lib/redis maxclients 10000 maxmemory-policy volatile-lru maxmemory-samples 3 appendfilename appendonly-6379.aof appendfsync everysec no-appendfsync-on-rewrite no auto-aof-rewrite-percentage 100 auto-aof-rewrite-min-size 64mb slowlog-log-slower-than 10000 slowlog-max-len 1024 vm-enabled no vm-swap-file /tmp/redis.swap vm-max-memory 0 vm-page-size 32 vm-pages 134217728 vm-max-threads 4 hash-max-zipmap-entries 512 hash-max-zipmap-value 64 list-max-ziplist-entries 512 list-max-ziplist-value 64 set-max-intset-entries 512 zset-max-ziplist-entries 128 zset-max-ziplist-value 64 activerehashing yes Redis-cli info: redis-cli info redis_version:2.4.16 redis_git_sha1:00000000 redis_git_dirty:0 arch_bits:64 multiplexing_api:epoll gcc_version:4.4.6 process_id:4174 uptime_in_seconds:79346 uptime_in_days:0 lru_clock:1064644 used_cpu_sys:13.08 used_cpu_user:19.81 used_cpu_sys_children:1.56 used_cpu_user_children:7.69 connected_clients:167 connected_slaves:0 client_longest_output_list:0 client_biggest_input_buf:0 blocked_clients:6 used_memory:15060312 used_memory_human:14.36M used_memory_rss:22061056 used_memory_peak:15265928 used_memory_peak_human:14.56M mem_fragmentation_ratio:1.46 mem_allocator:jemalloc-3.0.0 loading:0 aof_enabled:0 changes_since_last_save:166 bgsave_in_progress:0 last_save_time:1352823542 bgrewriteaof_in_progress:0 total_connections_received:286 total_commands_processed:507254 expired_keys:0 evicted_keys:0 keyspace_hits:1509 keyspace_misses:65167 pubsub_channels:0 pubsub_patterns:0 latest_fork_usec:690 vm_enabled:0 role:master db0:keys=6,expires=0 edit 1: add redis-cli info output

    Read the article

  • Server 2008, 2 NICs, 2 fixed IPs - big delays using internet

    - by user46055
    Hi geniuses I have an all in one Windows 2008 server, configured with AD/DHCP/DNS/RRAS - all set up with wizards and no specific tweaking. The server has 2 network adapters : one of which ("MyWAN") is plugged into our office's internet connection, the other ("MyLAN") is plugged into a local switch, which is also where all our desktops are connected. So this one server is doing everything. When first set up, MyLAN had a fixed IP of 192.168.2.1 and served the desktops with DHCP scope 192.168.2.50-99. It also told them to use 192.168.2.1 as DNS and gateway. MyWAN was setup to take its IP etc from DHCP, being handled by the building's router and ADSL modem etc. All desktops were setup to use DHCP. This all worked perfectly fine, until I recently changed MyWAN to have a static IP (I wanted to access it from home, and needed to give it a static IP to port map in the building's router). Things still work, but there is now a long delay when accessing the internet. The actual speed is as before when downloading, but there is a pause of 3-6 secs when connecting to new hosts (for example if I browse to slashdot from either a desktop or the server itself, it'll hang on connecting to slashdot.org, hang again on connecting to *.fsdn, *.google-analytics.com and all the other hosts referenced from the main page). If I ping slashdot.org from the server, I get the following : Pinging slashdot.org [216.34.181.45] with 32 bytes of data: Reply from 192.168.2.1: Destination host unreachable. Reply from 216.34.181.45: bytes=32 time=99ms TTL=239 Reply from 216.34.181.45: bytes=32 time=100ms TTL=239 Reply from 216.34.181.45: bytes=32 time=101ms TTL=239 Pinging anywhere external always seems to hit 192.168.2.1 first, which doesn't seem right. Trying tracert from the server gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 MYSERVER01.intranet [192.168.2.1] reports: Destination host unreachable Trying tracert from a desktop gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 <1 ms * <1 ms MYSERVER [192.168.2.1] 2 * * * Request timed out. 3 6 ms 6 ms 6 ms dsl-gw1.ge.mer.uk.webtapestry.net [217.151.111.17] 4 38 ms 239 ms 251 ms gw-router.ge.mer.uk.webtapestry.net [217.151.111.13] ...and then all is fine after that. I think that DNS is working fine because the domain names are getting translated to correct IPs immediately. DHCP seems to be okay? So perhaps it's something up with my RRAS setup - although I can't see any option during the setup wizard which I would have filled in differently. I've also tried changing the binding order of the two network connections, to prioritise MyWAN, but that doesn't seem to have done anything. Any idea what's up? Many thanks - Rob

    Read the article

  • Batch script for unattended install of a software

    - by Spidfire
    Ive got a few programms i need to install every time i reinstall a computer office 2003 Pro office 2007 compatibility pack Adobe acrobat Adobe flash but i hate to do this every time on every computer ive already made a batch script when i boot xp the first time after reinstall like @echo off "I:\installs\adobe reader\setup.exe" pause "I:\installs\office 2003\setup.exe" pause "I:\installs\office compatibilitiy\setup.exe" but it doesnt install automatic, is that possible?

    Read the article

  • Ubuntu 10.04 Windows2003 adding a route for GPO assignment

    - by David Carvalho
    I want the PC's that receive IP from my Ubuntu DHCP3-server to be able to retrieve the GPOs that are on my windows 2003 server. I'm using virtualbox and 3 virtual machines: 1 windows 2003 server 192.168.0.2 with 1 NIC (internal network). 1 ubuntu server 10.04 lts 192.168.0.1 with 1 NIC (internal network) and 3 aliases 192.168.21.0, 192.168.22.0, 192.168.100.0 1 Windows XP machine with 3 NIC's (internal network).

    Read the article

  • Save Word document to clipboard

    - by uwe
    I often come into the following situation: Get an email with attachment in MS Outlook Open that attachment in MS Word Starting to edit the document in MS Word Start replying to the email in MS Outlook Getting the edited document into my reply I have to save that file to disk and then drag it as attachment. I would think of a short way to get that document as attachement in the newly generated email. Is there a way to implement a save location as clipboard or just a copy to clipboard (the document, not the content)?

    Read the article

  • power point show

    - by doug
    I've edited a pps file which was made with the 2003 version and saved also as compatible with Power Point 97-2003 but a friend a mine can't see the last version of the file. The original file can be seen by my computer friend. What can I do to make the new version of the pps file to be viewable on the computer of my friend? Any tips? Where/what else do I have to check/do ?

    Read the article

  • seaudit report detail

    - by user1014130
    I've just started using selinux in the last 6 months and am getting to grips with it. However, using sealert on a new CENTOS 6 server, Im not getting the level of detail I was with CENTOS 5. To illustrate: Running sealert -a /var/log/audit/audit.log On CENTOS 5 I get: Summary: SELinux is preventing postdrop (postfix_postdrop_t) "getattr" to /var/log/httpd/error_log (httpd_log_t). Detailed Description: SELinux denied access requested by postdrop. It is not expected that this access is required by postdrop and this access may signal an intrusion attempt. It is also possible that the specific version or configuration of the application is causing it to require additional access. Allowing Access: Sometimes labeling problems can cause SELinux denials. You could try to restore the default system file context for /var/log/httpd/error_log, restorecon -v '/var/log/httpd/error_log' If this does not work, there is currently no automatic way to allow this access. Instead, you can generate a local policy module to allow this access - see FAQ (http://fedora.redhat.com/docs/selinux-faq-fc5/#id2961385) Or you can disable SELinux protection altogether. Disabling SELinux protection is not recommended. Please file a bug report (http://bugzilla.redhat.com/bugzilla/enter_bug.cgi) against this package. Additional Information: Source Context root:system_r:postfix_postdrop_t Target Context system_u:object_r:httpd_log_t Target Objects /var/log/httpd/error_log [ file ] Source postdrop Source Path /usr/sbin/postdrop Port Host Source RPM Packages postfix-2.3.3-2.1.el5_2 Target RPM Packages Policy RPM selinux-policy-2.4.6-279.el5_5.1 Selinux Enabled True Policy Type targeted MLS Enabled True Enforcing Mode Enforcing Plugin Name catchall_file Host Name server109-228-26-144.live-servers.net Platform Linux server109-228-26-144.live-servers.net 2.6.18-194.8.1.el5 #1 SMP Thu Jul 1 19:04:48 EDT 2010 x86_64 x86_64 Alert Count 1 First Seen Wed Jun 13 11:43:55 2012 Last Seen Wed Jun 13 11:43:55 2012 but on CENTOS 6 I just get: Summary: SELinux is preventing postdrop (postfix_postdrop_t) "getattr" to /var/log/httpd/error_log (httpd_log_t). Detailed Description: SELinux denied access requested by postdrop. It is not expected that this access is required by postdrop and this access may signal an intrusion attempt. It is also possible that the specific version or configuration of the application is causing it to require additional access. Allowing Access: Sometimes labeling problems can cause SELinux denials. You could try to restore the default system file context for /var/log/httpd/error_log, restorecon -v '/var/log/httpd/error_log' If this does not work, there is currently no automatic way to allow this access. Instead, you can generate a local policy module to allow this access - see FAQ (http://fedora.redhat.com/docs/selinux-faq-fc5/#id2961385) Or you can disable SELinux protection altogether. Disabling SELinux protection is not recommended. Please file a bug report (http://bugzilla.redhat.com/bugzilla/enter_bug.cgi) against this package. Im running exactly the same command. Does anyone have any idea why Im not getting the "Additional information" that I do with CENTOS 5? Thanks in advance Dylan

    Read the article

< Previous Page | 348 349 350 351 352 353 354 355 356 357 358 359  | Next Page >