Search Results

Search found 13467 results on 539 pages for 'port mapping'.

Page 352/539 | < Previous Page | 348 349 350 351 352 353 354 355 356 357 358 359  | Next Page >

• Why is my FTP output file blank?

  - by Nathan Long

  From the Windows command prompt, I have FTPd to a Windows web server. I can get a file, and I can see a directory listing with dir, but I want to save that list locally. I tried dir > c:\somefile.txt, and the file is created, but it's blank. Same thing if I do ls > c:\somefile.txt. The result is the same when I FTP from a Linux box. FTP sends back the following: 200 PORT command successful 150 Opening ASCII mode data connection for /bin/ls 226 Transfer complete

  Read the article

• Straight cable or cross over cable?

  - by om sai

  I have pppoe internet connection. My ISP provides connections like this: ISP->media converter(fiber)->8 port switch(TP Link TL-SF1008D)->to individual internet connection account holders (like me) Now the connection between the media converter and the switch is done using 4 pair cross over cat5 cable and I would like to connect the cable running from the switch to the router and through router to my PC. So what type of cable should I use to make the connection between the switch and the router (straight thru cable or cross over cable)? The point I am trying to make is I am able to connect to the internet using straight through cable between the switch and my PC but when I connect the same cable between the switch and the router and from router to my PC I am not able to connect to the internet. Also, if I am using the 2 pair cable (instead of 4) between the switch and the router I am able to connect to the internet but same is not true in case of 4 pair cat5 cable.

  Read the article

• SATA Backward compatibility? [closed]

  - by Fladur

  Possible Duplicate: Can I connect a SATA-II hard drive to a SATA-I connection? Hello everyone One of my system is really old, but I still use it, right now, the HDD is and old IDE drive that is starting to fail (I got to many damaged sectors) and I'm planing to replace it. The motherboard supports Serial ATA 1 and I have a real nice offer on a SATA 2 drive, can I use that drive on a SATA 1 interface (obviously with reduced speed) just like a USB 2.0 device on a 1.0 port? Thanks in advance.

  Read the article

• Administer postgres from PGAdmin on remote mac using ssh tunnel

  - by Aidan Ewen

  I've got PostgreSQL installed on a Ubuntu server and I'm trying to connect to that server using PGAdmin on a remote macbook. I've created an ssh tunnel - macbook:~postgres$ ssh -L 5423:localhost:5432 [email protected] And I can connect using psql on the macbook as expected - macbook:~ me$ psql -U postgres -p 5423 -h localhost ... postgres=# In the 'New Server Registration' window on PGAdminIII I'm entering the following credentials - Name - MyServer Host - localhost Port - 5423 Maintenance DB - postgres Username - postgres Password - <remote_postgres_password> However the connection fails - Error connecting to the server: FATAL: password authentication failed for user "postgres" Not sure what's going on here, these seem to be the same credentials I've used for psql.

  Read the article

• Configuring Server with no monitor

  - by Scandalist

  Sitting in front of me is an HP DL 380 Generation 4 with no monitor. I'd like to install an OS on the thing but for reasons obvious, I can't. I got excited when I found the ILO port on the back but unless you have a subscription it has limited functionality. I was thinking maybe there was some software out there that booted into some kind of remote access server? When I tested it with a monitor (A friends) I set the BIOS to boot from USB so anything I can load onto a stick should boot. Ideas? Hacks?

  Read the article

• self-issued exchange certificate for dyndns-url

  - by Sam

  I've got an exchange server behind behind a port to address translation firewall. The server is reachable from the internet using a dyndns-url. Now I want to sync windows phones to exchange mailboxes. To achieve this, I need to install the exchange certificate on the windows phone (send it to the phone by mail, double click). So far so good. But, as far as I can see this does only work if the certificate on my exchange server matches the dyndns-url? So I'd like to know: how do I create a self signed certificate for my dyndns-url and install it on exchange?

  Read the article

• Server 2008 Web Edition IIS6 SMTP conflict

  - by user219313

  I'm using IIS6 Manager to setup the SMTP service on Windows Server 2008 Web Edition. There seems to be a conflict (port 25?) which means that I cannot start and stop the Default SMTP server within IIS6. I can start and stop it with the services.msc snap in and this is reflected in state of the SMTP server in IIS6 manager. I'm worried that none of the settings I want to get at within IIS6 (logging, authentication etc..) are having any effect. None of these settings are available within IIS7 in Web Edition.

  Read the article

• Security question pertaining web application deployment

  - by orokusaki

  I am about to deploy a web application (in a couple months) with the following set-up (perhaps anyways): Ubuntu Lucid Lynx with: IP Tables firewall (white-list style with only 3 ports open) Custom SSH port (like 31847 or something) No "root" SSH access Long, random username (not just "admin" or something) with a long password (65 chars) PostgreSQL which only listens to localhost 256 bit SSL Cert Reverse proxy from NGINX to my application server (UWSGI) Assume that my colo is secure (Physical access isn't my concern for the time being) Application-level security (SQL injection, XSS, Directory Traversal, CSRF, etc) Perhaps IP masquerading (but I don't really understand this yet) Does this sound like a secure setup? I hear about people's web apps getting hacked all the time, and part of me thinks, "maybe they're just neglecting something", but the other part of me thinks, "maybe there's nothing you can do to protect your server, and those things are just measures to make it a little harder for script kiddies to get in". If I told you all of this, gave you my IP address, and told you what ports were available, would it be possible for you to get in (assuming you have a penetration testing tool), or is this really protected well.

  Read the article

• Does Juniper Networks provide keyloggers with their software?

  - by orokusaki

  I noticed that I had a "USB Mass Storage Device" plugged in when there wasn't in fact anything plugged in to any USB port. I turned it off via Windows (XP), but it's quite concerning. This was after installing Juniper Networks' software for VPN access to an IT guy's stuff. I also notice there is a service called "dsNcService.exe" which apparently is sending information over the internet (even when I'm not in VPN access). The process restarts itself when I end it. Should I be worried that this software is tracking my keystrokes and broadcasting them to my IT guy?

  Read the article

• not able to mount media to ESX 4.0

  - by jack8138

  Hi, I have ESX 4.0 running on NEC Express 5800 R-120a model. I have 2 VMs running windows XP. I am not able to mount any media to it. When I try connecting the local media to the VM, the error message comes mentioning "a connection to the host could not be established.: I have checked and there is no network issue. ESX is accessible fine. Any help would be greatly appreciated. Besides, I have opened almost all the ports in the firewall just to make sure there is no port conflict.

  Read the article

• What could cause my LAN Pings be greater than 100ms?

  - by James Holland

  I have 2 servers (Both: Windows Server 2008, Dual Xeon 2.8Ghz, 32GB RAM, 8 x 15k SAS Drives). One of them is a DC / Web server / Exchange Server, the other is a SQL Server (2008). I have a 48 port Netgear GS748T Gigabit switch. When I ping from server to server, I get ping times <1ms, great, but when I ping from a PC, I get varying pings from the occasional <1ms to 500ms!! If I log into either server and look at Task Manager, CPU usage peaks at 20%, memory usage is 100%, but I am led to believe this is normal as Exchange will just use as much as you have, and release it when requested. Network usage peaks at 1%. I really don't understand how the ping can vary that much. I know I am giving very little info, but this is all I know, I apologise, but can anyone help? In response to question, I have pinged by both IP address and hostname, no difference in ping times.

  Read the article

• Are there any negative impact running all services on a single static IP?

  - by Jake

  I need to setup a VPN trunk (with remote branch office location), Video Conference and Web Server on-premise in the office. I am used to ISP providing blocks of 8 or 16 IPs. But I have a new ISP which says they only can provide a single IP. Are there any issues with running all services on a single IP? I don't think this has any thing to do with bandwidth..? I'm not using SSL certificates... I can do port forwarding to different machines... What else...? Disclaimer: I am a programmer by training. Sorry for noob question.

  Read the article

• How do you enable syslogd to accept incoming connections on Snow Leopard from remote loggers?

  - by Emmel

  How do I get syslogd to accept incoming connections from remote hosts on Snow Leopard? I'd like to centralize logging such that various devices and systems send logs to Snow Leopard's syslogd, which normally hangs out on UDP 514. However, I'm unable to get them to successfully be accepted by good ole syslogd. I tcpdumped on the Snow Leopard box to verify that packets are being spouted to port 514 -- they are. I checked that syslogd is listening on 514 -- it's not. Googling around told me that, on older versions of OSX (don't you love the way things change so rapidly on OSX), one just had to add a flag to the syslogd daemon to allow remote; one did this in com.apple.syslogd.plist. However the syslogd daemon has no flags (at least in its man page) that suggests any remote anything. What's the solution to this? Secondary, less import but relevant question: What's 'newsyslog'? I see a plist file but it's not running (apparently). Thanks

  Read the article

• Why did cherokee-admin-launcher crash?

  - by DarenW

  I'm trying out the Cherokee http server on a seemingly fine machine. Following simple set-up instructions, I tried running cherokee-admin-launcher but it printed error messages and hung up. Ctrl-C did not kill it; I had to kill -9 it from another xterm. OTOH, cherokee-admin ran fine (or at least got a lot further). What is the problem with python and cherokee-admin-launcher, and how to fix it? [root@iron rc.d]# cherokee-admin-launcher Checking TCP port 9090 availability.. OK Launching: LD_LIBRARY_PATH=/usr/lib /usr/sbin/cherokee-admin Exception in thread Thread-1: Traceback (most recent call last): File "/usr/lib/python2.7/threading.py", line 530, in __bootstrap_inner self.run() File "/usr/bin/cherokee-admin-launcher", line 209, in run return self._run_guts() File "/usr/bin/cherokee-admin-launcher", line 217, in _run_guts env=self.environ, close_fds=True) File "/usr/lib/python2.7/subprocess.py", line 672, in __init__ errread, errwrite) File "/usr/lib/python2.7/subprocess.py", line 1202, in _execute_child raise child_exception OSError: [Errno 2] No such file or directory ^C ^C

  Read the article

• Nginx + Haproxy + Thin + Rails - 503 Service Unavailable -

  - by Luca G. Soave

  I don't know how troubleshoot this. I get "503 Service Unavailable" http error for all "nginx upstreams" proxy passing calls to haproxy fast_thin and slow_thin ( server 127.0.0.1:3100 and server 127.0.0.1:3200 ), which loadbalance on 6 Thin servers ( 127.0.0.1:3000 .. 3005 ). Static files like /blog are currently fine. The falldown is: nginx on port 80 - haproxy on 3100 and 3200 - thin on 3000 .. 3005 and then Rails. Here it is /etc/nginx/nginx.conf : user nginx; worker_processes 2; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; sendfile on; tcp_nopush on; keepalive_timeout 65; tcp_nodelay on; include /etc/nginx/conf.d/*.conf; } then /etc/nginx/conf.d/default.conf upstream fast_thin { server 127.0.0.1:3100; } upstream slow_thin { server 127.0.0.1:3200; } server { listen 80; server_name www.gitwatcher.com; rewrite ^/(.*) http://gitwatcher.com/$1 permanent; } server { listen 80; server_name gitwatcher.com; access_log /var/www/gitwatcher/log/access.log; error_log /var/www/gitwatcher/log/error.log; root /var/www/gitwatcher/public; # index index.html; location /about { proxy_pass http://fast_thin; break; } location /trends { proxy_pass http://slow_thin; break; } location /categories { proxy_pass http://slow_thin; break; } location /signout { proxy_pass http://slow_thin; break; } location /auth/github { proxy_pass http://slow_thin; break; } location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; if (-f $request_filename/index.html) { rewrite (.*) $1/index.html break; } if (-f $request_filename.html) { rewrite (.*) $1.html break; } if (!-f $request_filename) { proxy_pass http://slow_thin; break; } } } then haproxy config file /etc/haproxy/haproxy.cfg : global log 127.0.0.1 local0 log 127.0.0.1 local1 notice #log loghost local0 info maxconn 4096 #chroot /usr/share/haproxy user haproxy group haproxy daemon #debug #quiet nbproc 1 # number of processing cores defaults log global retries 3 maxconn 2000 contimeout 5000 mode http clitimeout 60000 # maximum inactivity time on the client side srvtimeout 30000 # maximum inactivity time on the server side timeout connect 4000 # maximum time to wait for a connection attempt to a server to succeed option httplog option dontlognull option redispatch option httpclose # disable keepalive (HAProxy does not yet support the HTTP keep-alive mode) option abortonclose # enable early dropping of aborted requests from pending queue option httpchk # enable HTTP protocol to check on servers health option forwardfor # enable insert of X-Forwarded-For headers balance roundrobin # each server is used in turns, according to assigned weight stats enable # enable web-stats at /haproxy?stats stats auth haproxy:pr0xystats # force HTTP Auth to view stats stats refresh 5s # refresh rate of stats page listen rails_proxy 127.0.0.1:3100 # - equal weights on all servers # - maxconn will queue requests at HAProxy if limit is reached # - minconn dynamically scales the connection concurrency (bound my maxconn) depending on size of HAProxy queue # - check health every 20000 microseconds server web1 127.0.0.1:3000 weight 1 minconn 3 maxconn 6 check inter 20000 server web1 127.0.0.1:3001 weight 1 minconn 3 maxconn 6 check inter 20000 server web1 127.0.0.1:3002 weight 1 minconn 3 maxconn 6 check inter 20000 listen slow_proxy 127.0.0.1:3200 # cluster for slow requests, lower the queues, check less frequently server slow1 127.0.0.1:3003 weight 1 minconn 1 maxconn 3 check inter 40000 server slow2 127.0.0.1:3004 weight 1 minconn 1 maxconn 3 check inter 40000 server slow3 127.0.0.1:3005 weight 1 minconn 1 maxconn 3 check inter 40000 and the Thin config file /etc/thin/gitwatcher.yml : --- chdir: /var/www/gitwatcher environment: production address: 0.0.0.0 port: 3000 timeout: 30 log: log/thin.log pid: tmp/pids/thin.pid max_conns: 1024 max_persistent_conns: 100 require: [] wait: 30 servers: 6 daemonize: true if I look into open listen ports, I got the following : root@fullness:/var/www/gitwatcher# lsof | grep TCP | egrep "nginx|haproxy|thin" nginx 834 root 8u IPv4 921 0t0 TCP *:http (LISTEN) nginx 835 nginx 8u IPv4 921 0t0 TCP *:http (LISTEN) nginx 837 nginx 8u IPv4 921 0t0 TCP *:http (LISTEN) haproxy 1908 haproxy 4u IPv4 11699 0t0 TCP localhost:3100 (LISTEN) haproxy 1908 haproxy 6u IPv4 11701 0t0 TCP localhost:3200 (LISTEN) root@fullness:/var/www/gitwatcher# iptables -L get me the following : Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp dpt:22222 ACCEPT tcp -- anywhere anywhere tcp dpt:http ACCEPT tcp -- anywhere anywhere tcp dpt:https ACCEPT all -- anywhere anywhere DROP all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere Any help ?

  Read the article

• Troubleshooting MySQL : can connect to localhost but not to 127.0.0.1 or IP

  - by mireille raad

  Hello, I'd appreciate some help on this, it is bit tricky to find the correct keywords to google :) Using PHP i am able to connect using the following connection string : $link = mysql_connect('localhost', 'wlek' , 'wlek'); but when i use 127.0.0.1 or 10.10.40.15 (self-IP), i am getting connection failed Could not connect: Can't connect to MySQL server on '10.10.40.15' (13) I used yum install mysql , yum install php yum install php-mysql 1 - is there anything more i should install for php ? 2 - any troubleshooting tips ? 3 - what keywords, links do u recommend | % | mir | xdb | | 10.10.40.15 | mir | xdb | | localhost | mir | xdb | [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql port=3306 bind-address=0.0.0.0 old_passwords=1 [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid ~ appreciate it :)

  Read the article

• Sending mail in localhost:25 with Ssmtp

  - by Juan

  I already have Ssmtp installed and working in a Centos 5.7 machine with Gmail configured. I can send mails in th shell without problems. Now i want to use the ssmtp to allow a web app (installed in the same machine) to send mails but for do this i have to find a way to ssmtp "hears" in the port 25 (or any other). There is a way to do this? There is another simple alternative to ssmtp who allows to send mail using localhost:25? Thanks.

  Read the article

• Connected 2 routers, but they won't talk

  - by ekolis

  I'm trying to set up a second WLAN at home (since the Nintendo DS firmware won't connect to my WPA-encrypted main WLAN), but when I connect my second router's WAN port to one of my main router's LAN ports, the routers won't talk, and I can't connect wirelessly to the second router. I can still see the second router's WLAN - I am just unable to connect to it. And it seems that even the main router can't see the second router, despite being plugged directly into it - I went to the main router's admin console and pinged the second router (which is receiving an IP address), but it was unable to reach it! Does anyone know what might be wrong? Thanks!

  Read the article

• Hostname Problem On WHM / cPanel Installation

  - by Eray

  My CentOS 5.6 server's hostname was "centos" . And then i change it to my domain : hostname domain.com And i started to installing WHM / cPanel as explained in here : http://etwiki.cpanel.net/twiki/bin/view/AllDocumentation/InstallationGuide/InstallingCpanel It's installed very well. And the i reboot my server. After rebooting, i was execute this command for open WHM's 2087 port : iptables -I RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 2087 -j ACCEPT Now i'm trying to browse domain.com:2087 i'm getting Server (centos) not found .I noticed it's forwarding to my old hostname (centos) . And then execute this command to verify me hostname hostname it's returned "centos" again. I'm not sure, why it's returned to old hostname. (I think it returned to old hostname after rebooting) . I'm changed it one more time : hostname domain.com Finally, now my hostname is domain.com . BUt still i'm getting centos server not found error. This is result of iptables -L command. P.S. : domain.com/cpanel is working

  Read the article

• IIS 7 Request routing

  - by Abraham Durairaj

  Not sure the title is right. I have my site configured in IIS7 and I have another partner site which runs on a different port eg. http:// localhost:1234 /mysite. Can I have my parent site to have a virtual site http:// localhost /mysite to route requests to the partner site http://localhost:1234 /mysite. I should not redirect but I should basically proxy the requests. Any help here is appreciable. Thanks in advance.

  Read the article

• Can't connect to sql server 2008 named instance

  - by hcsrpm

  I have sql server 2005 and 2008 running on a server on my local (and very straightforward) network. Using sql management studio 2008 and visual studio 2008, I can connect over the network to the 2005 instance which is the default instance. I can't connect to the 08 instance (named MC08). I can connect to both when logged in to the server. Remote connections have been enabled for MC08 and dynamic ports is turned off (assigned to port 1045). The sql browser service is running as well. This used to work so I'm not sure what has changed. I can't connect using the IP address either. Nothing unusual in the event log either. Any ideas?

  Read the article

• ubuntu 12.04 server and tftp access violation issue on put command

  - by SMYERS

  I installed tftp as per this document: http://icesquare.com/wordpress/solvedtftp-error-code-2-access-violation/ I followed this to the letter 3 times and every time I put a file I get: root@CiscoCFG:~# tftp localhost tftp put test Error code 2: Access violation tftp root@CiscoCFG:~# tftp localhost tftp put test Error code 2: Access violation If I touch the file name chmod 777 the file then do a put it works perfectly fine. My config is as follows: service tftp { protocol = udp port = 69 socket_type = dgram wait = yes user = nobody server = /usr/sbin/in.tftpd server_args = -s /svr/tftp disable = no } the directory /svr/tftp permissions are 777: drwxrwxrwx 3 nobody nobody 4096 Nov 14 10:32 svr This thing should have full permissions as would anyone who wanted to write or read from that directory. I see nothing in the logs im really stumped on this. If the file is already in the directory I can read it all day long, I just cant make NEW files, can not put them, but I can do get's, I can only put to an existing file with permissions @777. Thanks

  Read the article

• How do I send mail from Tripwire using SMTP?

  - by ThomasG33K

  I have just installed tripwire using Ubuntu repos and have gone into the configuration files and changed everything to what I want. When in comes to the options for SMTP mail method and the server and port to use, I am stumped. When I run the test email I get this error message. /usr/sbin/tripwire --test --email blah@nowhere Sending a test message to: blah@nowhere ### Error: The SMTP connection could not be established. ### Server: localhost ### Exiting... Email test failed. I have made appropriate changes to the firewall. I don't have an smtp server installed. Do I need to? Any other ways I could use without installing an SMTP server due to security issues?

  Read the article

• VMXNET3 nic loses the ability to update ARP table after N hours

  - by Peter

  I have a fedora 18 VM that stops updating the arp table on eth1 after running for a number of hours to days. There are other VMs on the same hypervisor that can access all of the same networks without issue. A tcpdump of the offending NIC shows only ARP broadcasts but no responses. None of the other VMs on the vDS see the ARP broadcasts from the offending NIC. The only way I can currently solve the problem is to reboot the VM and then everything works for a while. I've tried changing the port on the vDS and even flipping the network configurations after I lose eth1's ARP table, but the ARP problem follows eth1 but I can access the machines that were originally on eth1. If I statically add the arp entries for machines on the same subnet I have no problems with connectivity. The Hypervisor is an HP BL49X series with flex-10 network modules. Has anyone seen anything like this before?

  Read the article

• Can't perform ODBC connection to MySQL server on local network

  - by Emmanuel

  I have a wamp server running on LAN ip address 192.168.1.101 . From the browser on my PC which is on the LAN I can access the webserver and have as well set the phpmyadmin.conf file to be able to access the phpmyadmin interface. This works smoothly. On the wamp server I have a database which I'd need to access from any PC on the LAN using the MySQL Connector/ODBC. The problem is that I do not manage to setup the connection correctly. Here are the paramenters I use: Data Source Name: test_connection Description: test conenction Server: 192.168.1.101 Port: 3306 User: root Password: Database: The error message I get is the following: Connection Failed: [HY000][MySQL][ODBC 5.1 Driver]Can's connect to MySql server on '192.168.1.101' (10060) Would anybody have a hint to set up correctly the connection?

  Read the article

< Previous Page | 348 349 350 351 352 353 354 355 356 357 358 359  | Next Page >