2 HP Procurve 4000M switches and Comcast SMC Gateway

Posted by Cole Tierney on Server Fault See other posts from Server Fault or by Cole Tierney
Published on 2012-03-29T17:09:22Z Indexed on 2012/03/29 17:32 UTC
Read the original article Hit count: 417

Filed under:

hp

|

procurve

|

stp

We've got 2 HP Procurve 4000M switches joined by a trunk. Switch 1 is connected to a Cisco 2600 router which is connected to a T1. Internet traffic for hosts on switch 2 must pass through the trunk to switch 1. We're now switching to Comcast who's given us 4 port SMC router.

I would like to connect each switch to the comcast router to reduce traffic on the trunk, but I don't want to create a loop. The switches support spanning tree protocol, but I don't know how this would work with the comcast router.

Would a triangle network like this work?

Thanks for any tips.

© Server Fault or respective owner

Related posts about hp

/usr/lib/cups/backend/hp has failed with an HP LaserJet p3005

as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
Ever since 10.04, I can't print to an HP laserjet p3005. I'm even using an entirely different computer now with a fresh install of 10.10. I've tried with and without the latest hplip. Recently, sometimes I can get it to print a few things, but eventually it always fails (usually when printing a… >>> More
/usr/lib/cups/backend/hp has failed with an HP LaserJet p3005

as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
Ever since 10.04, I can't print to an HP laserjet p3005. I'm even using an entirely different computer now with a fresh install of 10.10. I've tried with and without the latest hplip. Recently, sometimes I can get it to print a few things, but eventually it always fails (usually when printing a… >>> More
HP PDX Laptop and blu-ray region, HP MediaSmart problem

as seen on Super User - Search for 'Super User'
I have a laptop here, a HP HDX 16 EO1000 with a Blu-Ray drive. Installed on the machine is a software package called HP MediaSmart, which presumably can play Blu-Ray movies. However, when inserting a BD disk and starting HP MediaSmart, it comes up with a warning screen and the following message: … >>> More
Ubuntu 14.04:LTS , HPLIP loses USB connection to HP laserjet

as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
This is my first post, so please let me know if i have inadvertanly broken any rules. Problem There seems to be a problem with HPLIP and USB connections in ubuntu 14.04LTS. After upgrading i managed to get the printing to work but today it has broken. Initial Issue (Solved) After upgrading to… >>> More
Getting hp-snmp-agents on HP ProLiant DL360 on Lenny working

as seen on Server Fault - Search for 'Server Fault'
After receiving our HP ProLiant DL360 I'd like to integrate the machine into our Munin system and thus enable ProLiant specific information to be exposed via SNMP. I'm running Debian Lenny with kernel 2.6.26-2-vserver-amd64 . I've followed http://downloads.linux.hp.com/SDR/getting_started.html and… >>> More

Related posts about procurve

HP ProCurve GVRP Setup

as seen on Server Fault - Search for 'Server Fault'
I'm trying to setup GVRP on my 4 ProCurve switches. Currently I have a Layer 3 3500yl-24G (J8692A) which is connected to 3 Layer 2 2510G-48 (J9280A). I have three trunk ports setup on the 3500 connected to the 3 switches and currently everything seems to be working, the devices are talking to eachother… >>> More
Load-balancing between a Procurve switch and a server

as seen on Server Fault - Search for 'Server Fault'
Hello I've been searching around the web for this problem i've been having. It's similar in a way to this question: How exactly & specifically does layer 3 LACP destination address hashing work? My setup is as follows: I have a central switch, a Procurve 2510G-24, image version Y.11.16. It's… >>> More
Autonegotiate errors between HP and Cisco hardware?

as seen on Server Fault - Search for 'Server Fault'
This is a bit of a specific extension to this question. I've got two ASA's that feed into a Procurve switch, and then into an IPS. All is well except that the procurve absolutely refuses to autonegotiate with the ASA's...The asa's run 100full, and the procurve autonegotiates to 100half. It does it… >>> More
Is it possible to change the voltage on a single port on an HP ProCurve 2910al POE switch and how?

as seen on Server Fault - Search for 'Server Fault'
I have a couple of HP ProCurve 2910al POE+ switches at my company that we are primarily using to power our VOIP phones that run on 48V DC. However, I have one wireless access point that I need to run off of POE, but it has to be 24V DC. I'm afraid to plug it into the POE ProCurve because I'm not… >>> More
iSCSI SAN Implementation with several ESXi hosts and two Equallogic SANs

as seen on Server Fault - Search for 'Server Fault'
I work for a small state college. We currently have 4 ESXi hosts (all made by Dell), 2 EqualLogic SANs (PS4000 and PS4100) and a bunch of old HP Procurve switches. The current setup is very far from being redundant and fast so we want to improve it. I read several threads but get even more confused… >>> More