Search Results

Search found 12283 results on 492 pages for 'tcp port'.

Page 352/492 | < Previous Page | 348 349 350 351 352 353 354 355 356 357 358 359  | Next Page >

• Cisco WLAN Controller not pushing out DHCP addresses, what else could it be?

  - by Name

  On our Cisco WLAN Controller web interfaces, in Controller Interfaces, I have made a new interface with these settings: VLAN Identifier 202 IP Address 172.16.202.1 Netmask 255.255.255.0 Gateway 172.16.202.254 Primary DHCP Server 172.16.100.3 Secondary DHCP Server 172.16.100.2 Port: LAG I've also made a new WLAN and assigned it to the above interface. I have saved changes. But our wireless devices, although they seem to authenticate with the WLAN fine, they always get stuck on "obtaining DHCP address", so it seems the WLAN Controller isn't pushing out DHCP addresses to our devices. We do have a DHCP scope for the above in Windows Server 2008 R2 and everything there seems fine. If I connect a device with a static address (e.g. 172.16.202.10), it will connect. Stuck on what to do :(

  Read the article

• Help: My SSL Certificate expired but I can't renew this weekend, is there a way I can disable SSL through IIS?

  - by shogun

  Or perhaps force redirect to HTTP when they request HTTPS? I tried removing the SSL port settings under 'Advanced' but it broke the login page. I don't want to do a deploy/recompile right now but I am able to edit the VIEWS. However I am thinking there may be a way for IIS to do this, but then again I think the .NET code tries to force SSL. Crap. This is bull crap because I was bugging people about getting the new certificate since December and they were like oh we will take care of it... I think it may have even gotten to the point where they were getting annoyed with me hassling them about it! (rant over.) And yes, the key is that more support tickets will be caused by the browser giving a security error than if SSL was removed entirely for one day. Becaues they wouldn't very very likely not notice it being gone.

  Read the article

• xenserver: xe command never returns?

  - by ethrbunny

  I'm trying to port a xen server 6.2 pool to a new IP address range. I've got three servers total: 2 currently at their new IP but no longer in the pool and one remaining. I'm trying to set IP address information on the two disconnected ones using the xe command and all of its variants. Oddly enough, it never returns with any values. xe host-list It just sits there until I ctrl-c it. The server is still awake and responding though. I can enter other commands (EG ifconfig) and they work fine. If I enter this same command on the remaining server in the pool it works ok. I've tried restarting the toolstack and even rebooting. No change. What am I doing wrong?

  Read the article

• How to disable screens turn off Windows 8.1

  - by Warpzit

  So recently my computer started turning my screen monitors off after a while without activity, if I move the mouse or hit the keyboard they turn back on. I just want them to stay on. My System is windows 8.1 64 bit, I have 2 screens with mini display port and 1 television with hdmi which often is in regular television mode when this issue happens. Now before you jump to conclusions this is what I've tryed: Disabled screen saver Power saving settings to high with following set: Turn of the display: Never Put the computer to sleep: Never Turn off hard disk after: Settings: Never Sleep: Sleep after: Settings: Never Display: Turn off display after: Settings: Never Display: Enable adaptive brightness: Settings: Off Multimedia settings: When sharing media: Settings: Prevent idling to sleep. Any pointers that get me in the right direction will be greatly appreciated.

  Read the article

• Activating ssl on tomcat

  - by toom

  I want to encrypt the http traffic on a tomcat instance via ssl. Therefore I followed the most simplistic approach described on various webpages. But anyway it simply does not work. Here is what I did: "keytool -genkey -alias tomcat -keyalg RSA" and I enterd "changeit" as the password (since this is the defaut chosen by tomcat) Altering $CATALINA_HOME/conf/servers.xml by uncommenting the following line Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS"/ Restarting tomcat Entering https://localhost:8443 does not work. However, I can still access the page via normal http like http://localhost:8080 The logfile does not contain any suspicious information. What is going wrong here?

  Read the article

• Site on IIS 7.5 accessible via SSL on server, but not from local network

  - by bnieland

  I have a site set up on IIS 7.5. I added the following binding... type: https Host Name: [Blank] Port: 443 IP Address: 192.168.1.6 Binding Information: [Blank] I can access the site via https://192.168.1.6 from the server itself. When I try to access the site from another machine (193.168.1.4) on the same sub-net via https://192.168.1.6 I get no response. http://192.168.1.6 returns the site as expected. I have used wireshark to examine the packets on the server, the first of which I have included as an image. There were two other packets, very similar to this. There was no response from the server. Any Ideas?

  Read the article

• USB 3.0 hub; what can it power?

  - by pouzzler

  I own an Asus UX31A laptop, equipped with 2 USB 3.0 ports. I would like to connect several USB devices to one of these ports, using a USB 3.0 hub. 1) Am I correct in assuming the Asus "USB Charger+" commercial blurb corresponds to the USB 3.0 standard "Battery Charging Specification 1.2", and furthermore inferring that the laptop can deliver 1.5A through a USB port? 2) Does a powered external USB 3.0 hard drive draw on the USB power lines? 3) I would like to connect the aforementionned drive, an android phone, and a 200mA rated optical mouse to an unpowered USB 3.0 hub, itself plugged into the laptop. Should my above assumptions be false, would this setup be able to power all three devices? Thanks to the usb guru who'll settle my fears to rest. Best regards, Sébastien

  Read the article

• How can I access blocked sites while in China?

  - by Samuurai

  I have some colleagues who need to go to China for work, however while they're there, they can't access a lot of sites. One of which is GMail (Google Apps), which they need for work. We have a UK based Ubuntu server, which I have root access for. What can I do for them? I thought about a Squid proxy, but it might rely on their hotel having port 8080 open, so, not ideal. Are there any workarounds or other solutions?

  Read the article

• CentOS not allowing remote MySQL connections

  - by nd8ad

  When assigning a user from a remote IP to connect to a database it is saying that it's failing to connect. It is also failing to connect with root so something is wrong. Bind IP is off and I have also tried disabling iptables, still no dice. Port 3306 is forwarded. I'm running on Centos 5.6, using phpmyadmin, but I have also tried to assign the user via the commandline and create a new database, still not working. Been googling and troubleshooting for hours now, no dice.

  Read the article

• MS 2008 R2 Drops Remote Desktop Sessions in 10 seconds or less every time

  - by mike42

  I'm adding a new 64-bit server to our domain. Everything seems fine except when accessing the machine using remote desktop, after a few seconds the connection is lost. The error message is "This computer can't connect to the remote computer." "Try connecting again. If the problem continues, contact the owner of the remote computer or your network administrator." A similar result with Telnet on port 3389. I am able to connect but if I hit a key the connection to host lost. The event log shows the successful login. No errors. Any ideas?

  Read the article

• Wifi and eth behavior

  - by r00ster

  I have a wireless router 150M Wireless Lite N Router Model No. TL-WR740N / TL-WR740ND. Normally, when I'm connected to the local network using eth0 I can ping other machines by issuing ping name. When I'm connected through wifi I have to issue ping name.domain.com. The machine is only visible in intranet. How to achieve the same behavior with wifi? The second problem is, that I can not connect to some external sites through wifi but through eth everything is ok. I guess that is related to some port forwarding, but I'm not sure. How can I resolve this issue? EDIT: I'm using Linux Mint.

  Read the article

• Wifi and eth behavior

  - by r00ster

  I have a wireless router 150M Wireless Lite N Router Model No. TL-WR740N / TL-WR740ND. Normally, when I'm connected to the local network using eth0 I can ping other machines by issuing ping name. When I'm connected through wifi I have to issue ping name.domain.com. The machine is only visible in intranet. How to achieve the same behavior with wifi? The second problem is, that I can not connect to some external sites through wifi but through eth everything is ok. I guess that is related to some port forwarding, but I'm not sure. How can I resolve this issue? EDIT: I'm using Linux Mint.

  Read the article

• vSwitch configuration with 12 uplinks

  - by Joshua

  I have been doing a lot of research on vSwitch configurations, but I think I am more confused now after all of the reading that I have done. So here is my situation 3 ESX Hosts (12 nics each), 1 iSCSI SAN, 2 Force 10 switches. Should I create individual vSwitches for MGMT, vMotion, VM, and SCSI traffic? or do I need to group anything together in the same vSwitch? I am going to have 4 vLANS total, one for each of those items, do I need to do any trunking on the physical switch or just assign the correct vLAN to each physical switch port?

  Read the article

• Regarding the functioning of the HTTP server

  - by Luv

  As all of us uses the HTTP protocol for accessing the web, and request at the port number 80 of the server, now suppose i want to browse or download a file then i will request to the HTTP server by specifying the complete URL. If the server is having file, it would return it if it is not having the file then what will it do? I think it will make the request to the appropriate server which would be having this file and get the file and return to us. In this way does the HTTP server acts as an intermediate between the client and the server? Please correct me if i am wrong here. Many many thanx in advance

  Read the article

• Setup Apache in Amazon AWS

  - by hudarsono

  Hi, I tried to setup apache 2.2 in amazon aws using amazon ami. i did installed httpd and php and congirue http.conf to use /var/www/html. Then put file index.html on that folder. But when i tried to use browser to browse my domain which is ec2-122-248-255-181.ap-southeast-1.compute.amazonaws.com, nothing was loaded. I did start httpd by running apachectl start, and i can see it listening on port 80. Does anybody know what is wrong?

  Read the article

• Intel Network Connection: This device cannot start. (Code 10)

  - by harryuser

  I have a Intel® Desktop Board DP55KG (see http://www.intel.com/products/desktop/motherboards/DP55KG/DP55KG-overview.htm), which has a Intel 82578DC Gigabit Network Connection on board. Additionally, I have a Intel PRO/1000 PT Dual Port Server Adapter in a PCI express slot and I am running Windows 7 Professional 32-bit. Also I am running with Intels latest network driver, in the 82578DC questions this means 11.6.92.0 with driver date 2010.04.12. The problem I am having is that the Intel 82578DC Gigabit Network Connection will not start on boot with the following message: "This device cannot start. (Code 10)". Disabling and then enabling the device after boot makes the network connection work again without any problems, but as soon as I reboot the problem occurs again. Any suggestion how to fix this? I have seen this problem on another Intel S3420GP board as well in Windows 7 that is.

  Read the article

• How to stop windows 7 from asking to format a disk?

  - by clinux

  Hey guys, I have this USB flash drive with a Linux partition that I use inside VirtualBox. Each time I insert it into the USB port, windows keeps asking if it should format it. Is there anyway to disable Windows from asking that? Thanks. EDIT: Disabling auto-run has not resolved the problem unfortunately. Windows will still check if the disk contains a partition it knows about, and ask to format if it doesn't know it. Really nice try though, any other ideas?

  Read the article

• EC2: map multiple applications to different domains

  - by EsseTi

  i'm playing with EC2 and i've been able to create my instance that has a django appliacation on port 80, and a tomcat on 8080. now, with elastic IP i can manage to redirect my domain to django application. now i would like to map subdomains to each tomact applications. for example django app (ec2...:80) --> mydomain.com tomcat (ec2...:8080) --> tomcat.mydomain.com webbapp1 (ec2...:8080/webapp1/) --> webapp1.mydomain.com is this possible with the free account? ciao

  Read the article

• Unable to connect to vrde virtualbox VM remotely

  - by b1ackjosh

  So I've remotely created my first headless using ssh. Now I'm attempting to connect to this VM using RDP so I can install Ubuntu Server, but I cannot get connected at all. When starting the VM everything appears fine: $ vboxheadless -s WebTesting Oracle VM VirtualBox Headless Interface 4.0.16 (C) 2008-2012 Oracle Corporation All rights reserved. VRDE server is listening on port 4455. And showvminfo shows: VRDE: enabled (Address 0.0.0.0, Ports 4455, MultiConn: off, ReuseSingleConn: off, Authentication type: null) However I'm still prompted with the "enter your credentials" screen every time I attempt to connect. From reading the documentation null shouldn't prompt me with this screen at all... Any help with this is greatly appreciated. P.S. I am using ssh tunneling in putty to tunnel in to my network.

  Read the article

• Need to configure multiple default gateways for four seperate physical network ports for a FreeBSD Webserver

  - by user20010

  I need to configure default gateways for four separate physical network interfaces for a FreeBSD Webserver. Basically, this is a web server that needs to be accessed by multiple WANS. I've been using various online resources, and a combination of setfib, pf, and ipfw. This web server will be deployed in multiple sites where access to next hop router info is not available, so we can't use static routes. We've used setfib to successfully create multiple routing tables and can ping beyond every default gateway we've created. Using setfib # ping ip.addr.what.ever we can ping anything available on a wan and beyond the router. The problem is we can't get Apache web server (port 80) traffic to route out when external users access the server(box). Multiple people have examples of binding setfib to ipfw commands, but none of them seem to work.

  Read the article

• Will the VMs on the ESXi cluster be running after disconnection from the network?

  - by John

  What will happen if I disconnect the ESXi cluster configured with HA from the switch(I need to change the power source on the main switch) and there is no management port redundancy? I'm going to disable the host monitoring and VM monitoring within HA settings, and connect to the switch after it boots up. Will the virtual machines be running if I disconnect the hosts from the network so they will not see any other ESXi host? I hope everything will work fine and the hosts will join the cluster after they connect to the network again, but I would like to be sure ..

  Read the article

• wamp server does not start: Windows 7, 64Bit

  - by Ram

  I am trying to install wamp server (following is the exact setup name) on windows 7, 64Bit OS. But it never starts, icon stays in orange color meaning some services did not start. wampserver2.2e-php5.3.13-httpd2.2.22-mysql5.5.24-x64 I have been searching from last 3hours but did not find any solution. Port 80 is not in use. In windows services, when I try to start wampapache service manually, it throws following error: Windows could not start the wampapache service on Local Computer. Error 1053: The service did not respond ot the start or control request in a timely fashion. apache_error.log is empty. Things use to work fine in windows XP. May be this is a repeated thread, but I did go through similar posts. But nothing worked! Please help!!

  Read the article

• Recommended laptops for system admins?

  - by 80skeys

  Hey all - I'm in the market for a new laptop and wanted to get some recommendations. I'm a Linux sysadmin and this laptop is primarily for work related use, working from home, after hours, occasional trips to the data center, etc. We all know the drill. My typical setup includes various utilities and tools plus multiple partitions for booting different OS's including VMware. Need serial port of course, DVD-RW, and all the usual stuff we use in our daily routine. I'm kinda thinking a Thinkpad T510 but open to other suggestions! Brief explanation of why you suggest some particular brand and configuration is appreciated.

  Read the article

• ipfw is blocking access to a script

  - by user225551

  I need to figure out how to troubleshoot why ipfw is blocking my script. This script parses out some rss feeds over the net. I have about 10 different feed urls. About 5 or 6 of these urls are returning xml, the others are timing out. If I turn the firewall off, they will all work. The issue I'm having is that I have no idea what port I need to open for the urls that are timing out. Is there a command that will show me this?

  Read the article

• Deploy multiple django instances on one Host [migrated]

  - by tvn

  I am trying to setup multiple Django instances on one Host with lighttpd. My problem is to get Djangos FCGI working on subdirectories served by my Webserver. So my aim is the following: www.myhost.org/django0 - django1.fcgi on localhost:3000 www.myhost.org/django1 - django2.fcgi on localhost:3001 www.myhost.org/django2 - django3.fcgi on localhost:3002 Unfortunately the following configuration doesn't even work for one: $HTTP["url"] =~ "^/django0/static($|/)" { server.document-root = "/home/django0/django/static/" } $HTTP["url"] =~ "^/django0/media($|/)" { server.document-root = "/usr/lib/python2.7/dist-packages/django/contrib/admin/media/" } $HTTP["url"] =~ "^/django0($|/)" { proxy.server = ( "" => ( ( "host" => "127.0.0.1", "port" => "3001", "check-local" => "disable", ) ) ) } The only response I get is an 404 and even this takes a long time till I get this. I found nothing suspicious neither in the access.log nor in the error.log.

  Read the article

< Previous Page | 348 349 350 351 352 353 354 355 356 357 358 359  | Next Page >