Search Results

Search found 19703 results on 789 pages for 'virtual ip'.

Page 353/789 | < Previous Page | 349 350 351 352 353 354 355 356 357 358 359 360  | Next Page >

• Host is unreacheble with static networking configuration via /etc/network/interfaces while GUI NetworkManager is ok

  - by Riccardo

  I have some trouble setting-up the network interface using the static IP configuration. I run ubuntu 12.04 kernel 3.11.0-22 with the back-ports enabled. I followed these instructions from help.ubuntu.com but there seems to exist some conflict between the GUI approach (NetworkManager) and the command line approach. $ sudo nano /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.1.1.50 gateway 10.1.1.10 netmask 255.255.255.0 dns-nameservers 192.168.3.45 192.168.8.10 $ sudo /etc/init.d/networking restart I than try to ping for example google.com ping -c 3 www.google.com the response is that the host is unreachable. The icon on the top right of the desktop says: wired network disconnected. If I work using the GUI approach (Edit Connections and so on...) all works great. Can same one explain to me where I wrong? $ ifconfig eth0 eth0 Link encap:Ethernet HWaddr 90:e6:ba:07:4a:77 inet addr:10.1.1.50 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::92e6:baff:fe07:4a77/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:39619 errors:0 dropped:0 overruns:0 frame:0 TX packets:18520 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:19030895 (19.0 MB) TX bytes:2768769 (2.7 MB) $ netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0

  Read the article

• Apache (XAMPP 1.8.0) access.log/Intrusion Detection Concern

  - by Andy Holaday

  [I originally posted on SO but it earned me a Tumbleweed badge. This looks like a better venue for the question.] I have Apache (XAMPP 1.8.0) running on Vista Pro x64. A couple times now I have seen a pattern like the example below in access.log. Concerning is the "attack" seems to somehow shift from a public IP to a valid private IP on my network (happens to be the WAN address of one of my routers). Two questions: How is this possible, and what happens if the "attacker" stumbles on a valid request? I've googled this to no avail. 177.0.X.X - - [03/Jun/2012:08:19:34 -0400] "GET /phpMyAdmin-2.5.4/index.php HTTP/1.1" 403 177.0.X.X - - [03/Jun/2012:08:19:34 -0400] "GET /phpMyAdmin-2.5.5-rc1/index.php HTTP/1.1" 403 177.0.X.X - - [03/Jun/2012:08:19:34 -0400] "GET /phpMyAdmin-2.2.6/index.php HTTP/1.1" 403 177.0.X.X - - [03/Jun/2012:08:19:34 -0400] "GET /phpMyAdmin-2.5.5-rc2/index.php HTTP/1.1" 403 192.168.15.3 - - [03/Jun/2012:08:19:56 -0400] "GET /phpMyAdmin-2.5.6-rc2/index.php HTTP/1.1" 403 177.0.X.X - - [03/Jun/2012:08:19:56 -0400] "GET /phpMyAdmin-2.5.6-rc1/index.php HTTP/1.1" 403 177.0.X.X - - [03/Jun/2012:08:19:56 -0400] "GET /phpMyAdmin-2.5.5-pl1/index.php HTTP/1.1" 403 192.168.15.3 - - [03/Jun/2012:08:19:59 -0400] "GET /phpMyAdmin-2.5.7/index.php HTTP/1.1" 403 192.168.15.3 - - [03/Jun/2012:08:20:01 -0400] "GET /phpMyAdmin-2.5.7-pl1/index.php HTTP/1.1" 403 192.168.15.3 - - [03/Jun/2012:08:20:02 -0400] "GET HTTP/1.1" 400 1060 "-" "-"

  Read the article

• Backtick (Grave accent) button sticking

  - by Scott Lemmon

  I have Ubuntu 12.04 running in a Virtual Box virtual machine, on my Windows 7 32bit system. It has been working great, except that the backtick/tilde button sticks(not physically). When I hit the backtick button it keeps repeating until another input button is pressed. So if I press the spacebar while the backtick is repeating, it stops, but if I press the shift while it is repeating, the backtick turns into a tilde, and the tilde keeps repeating until I release the shift key (at which point it's a backtick again and keeps repeating). This sticking behavior only happens with the backtick key, and only in my Ubuntu virtualization, never in windows. I've tried both my laptop's keyboard and an external USB keyboard and the problem happens on both. Both keyboards I've tried are Japanese 106/109 key layout, but I'm using them with a English(US) 101 profile. When I refer to the backtick key above, I mean where it is on the US layout. If I use the Japanese profile, the key in that location (the US backtick location) still sticks, but its no longer mapped as the backtick key. Any thoughts as to what might be causing this and possible solutions? I've searched a lot, but have not found any help so far. Any help is greatly appreciated.

  Read the article

• Site in subdomain (MaraDNS + Nginx)

  - by Grzegorz

  Welcome, Actually I'm doing some experiments on my VPS with Ubuntu. I've installed MaraDNS with Nginx. At this moment I've correctly launch static site which is available from Internet (maindomain.com). In next step I want to add new site which will be available in subdomain, for example dev.maindomain.com. I've tried to db.maindomain.com file (used by MaraDNS): maindomain.com. xxx.xxx.xxx.xxx www.maindomain.com. CNAME maindomain.com. dev.maindomain.com. xxx.xxx.xxx.xxx Where xxx.xxx.xxx.xxx is VPS IP address. In nginx.conf I have: server { listen 80; server_name maindomain.com; access_log /var/log/nginx/maindomain.com.log location / { root /var/www/maindomain.com; index index.html; } } server { listen 80; server_name dev.maindomain.com; access_log /var/log/nginx/dev.maindomain.com.log location / { root /var/www/dev.maindomain.com; index index.html; } } With this configuration maindomain.com works properly, but dev.maindomain.com isn't available. When I try: ping dev.maindomain.com then I get my xxx.xxx.xxx.xxx IP. Do you have any suggestions how can I resolve this problem?

  Read the article

• WebLogic Application Server: free for developers! by Bruno Borges

  - by JuergenKress

  Great news! Oracle WebLogic Server is now free for developers! What does this mean for you? That you as a developer are permitted to: "[...] deploy the programs only on your single developer desktop computer (of any type, including physical, virtual or remote virtual), to be used and accessed by only (1) named developer." But the most interesting part of the license change is this one: "You may continue to develop, test, prototype and demonstrate your application with the programs under this license after you have deployed the application for any internal data processing, commercial or production purposes" (Read the full license agreement here). If you want to take advantage of this licensing change and start developing Java EE applications with the #1 Application Server in the world, read now the previous post, How To Install WebLogic Zip on Linux! WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. BlogTwitterLinkedInMixForumWiki Technorati Tags: WebLogic free,WebLogic for developers,WebLogic license,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• Apache HTTPS ProxyPass certificate location

  - by oz1cz

  I'm trying to set up an Apache server that uses ProxyPass to pass HTTPS requests on to another server. Let's call the proxy server ALPHA and the target server BETA. ALPHA does not run HTTPS, but BETA does. I first tried using this virtual host specification on ALPHA: <VirtualHost *:443> ServerName mysite.com ProxyPass / https://192.168.1.105/ # BETA's IP address ProxyPassReverse / https://192.168.1.105/ # BETA's IP address ProxyPreserveHost On ProxyTimeout 600 SSLProxyEngine On RequestHeader set Front-End-Https "On" CacheDisable * </VirtualHost> But when I tried this, Apache complained saying, "[error] Server should be SSL-aware but has no certificate configured [Hint: SSLCertificateFile]". I had to copy the SSL certificate from BETA to ALPHA and add these lines to the host specification on ALPHA: SSLEngine on SSLCertificateKeyFile /usr/local/ssl/private/BETA_private.key SSLCertificateFile /usr/local/ssl/crt/BETA_public.crt SSLCertificateChainFile /usr/local/ssl/crt/BETA_intermediate.crt Now the system works. But I have a feeling that I have done something wrong or unnecessary. I have the web site's private key and certificate lying on both ALPHA and BETA. Is that necessary? Should I have done it differently?

  Read the article

• Dual LAN Printing

  - by Christopher

  I want to use Ubuntu 10.10 Server in a classroom, a computer lab whose bandwidth is provided by a local cable ISP. That's no problem, though the school network has an IP printer that I want to use. I cannot reach the printer through the cable Internet. But, I have two network cards. How is it possible to use both networks at once? eth0 (static 192.168.1.254) is plugged into a four-port router, 192.168.1.1. On the public side of the four-port router is Internet provided by the cable company. I also have the classroom workstations plugged into a switch. The switch is plugged into the four-port router. The whole classroom is wired into the cable Internet. The other NIC, eth1, could it be plugged into an Ethernet jack in the wall? It uses the school network, and I might receive by DHCP an IP address like 10.140.10.100, with the printer on maybe 10.120.50.10. I was thinking about installing the printer on the server so that it could be shared with the workstations. But how does this work? Can I just plug eth1 into the school network and access both LANs? Thanks for any insight, Chris

  Read the article

• Bizarre image loading problem from apache2

  - by NateDSaint

  Users have complained a few times about seeing a bizarre set of pink or green stripes on our webpage. At first I thought there were a rash of video card outages, but then someone sent me a screenshot from their browser (IE8). I later saw the same thing, but with slightly different colors on Chrome. Users have experienced this on their iPads and iPhones (iOS Safari). Because I've optimized the site to cache images, the bad image stays around until you clear your cache, so once you do, it resolves itself. My assumption is that the transmission of the image is being cut off mid-stream and then staying that way, but I can't for the life of me figure out why. Here's what I've checked: Header length is being sent, and transmission looks okay (wget sample below): wget http://www.superiorlivestock.com/templates/sla2/images/wallbg2.jpg --2012-04-05 08:46:00-- http://www.superiorlivestock.com/templates/sla2/images/wallbg2.jpg Resolving www.superiorlivestock.com (www.superiorlivestock.com)... [ip redacted] Connecting to www.superiorlivestock.com (www.superiorlivestock.com)|[ip redacted]|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 45926 (45K) [image/jpeg] Saving to: `wallbg2.jpg' Images are not being served gzipped (apache conf below): SetOutputFilter DEFLATE SetEnvIfNoCase Request_URI \.(?:gif|jpe?g|png)$ no-gzip dont-vary The site is www.superiorlivestock.com, and here's a sample of the bad page load: Is there something obvious I'm missing? Am I saving my images in the wrong format somehow?

  Read the article

• Keyboard layout - certain keys work with AltGr, other doesn't

  - by user23122

  I run Ubuntu 12.04 in VirtualBox 4.3.14 on Windows 7 with a Swedish keyboard layout. In Windows everything works fine but in Ubuntu some keys/characters (the most important for a programmer) doesn't work. This is the result from pressing the keys in the top row 1234567890+´ (Unmodified top row on keyboard) @£$€ {[]}\ (Windows with AltGr) ¡ £$€¥ ± (Ubuntu with "AltGr") More characters are broken (pipe | is a notable example) but the top row is the biggest problem. I can workaround this by enabling "direct connection" from my USB keyboard to VirtualBox but then I have to manually disable that every time I switch out of VirtualBox. I have tried different keyboard layout, sometimes @ et al works but then other characters are broken. I also tried sudo dpkg-reconfigure keyboard-configuration with default values, but it didn't change anything. I have guest additions installed (from the built in virtual CD). I got my VB disk image from a colleague who does not have this problem, however, he does not have guest additions installed (and hence can't use a higher resolution than 1024x768, and I need to run Ecplipse...). He also have different installation of Virtual Box and Windows. For example, the key for 2 should, in Ubuntu, produce four different characters, 2"²@. The first three works fine, including superscript 2 that requires AltGr-Shift-2, it is just plain AltGr-2 to get @ that does not work on this key (and all the other keys I have problem with). Any ideas for a fix?

  Read the article

• firefox raided?

  - by dschinn1001

  ubuntu 12.10 with firefox 17.0 firefox is now suddenly not starting any more ? (since I tried something with virtualbox and win7 firefox seems to be raided somehow ? - then after next boot virtualbox with win7 did not work any more and had message like here: Premature end of data in tag VirtualBox line 8. Location: '/home/$user/VirtualBox VMs/V12/V12.vbox', line 86 (8), column 2. /home/vbox/vbox-4.2.4/src/VBox/Main/src-server/MachineImpl.cpp[724] (nsresult Machine::registeredInit()). Fehlercode: NS_ERROR_FAILURE (0x80004005) Komponente: Machine Interface: IMachine {22781af3-1c96-4126-9edf-67a020e0e858} ) this happened all - after win7 made an update and virtual hard-disk with size of normally 25 Gibi exceeded to 26.8 Gibi I plugged (when I created virtualbox with win7) usb-hard-disk with 500 Gibi, but somehow win7 was not installed on disk with 500 Gibi - instead only virtual-harddisk with default 25 Gibi was created - and smaller harddisk with maximum of 120 Gibi was restless stuffed out. This created then the problem with "raided" firefox and firefox cannot start any more. After I delelted virtualbox with win7 - there are 12 Gibi free space back on the smaller harddisk - but firefox remains after reboot out-of-function and does not start.

  Read the article

• Camera field of view: 3D projections & trigonometry

  - by Thomas O

  Okay, here goes. I have a camera at (Xc, Yc, Zc.) The Xc and Yc coordinates are latitude/longitude, and the Zc coordinate is an altitude in metres. I have a point at (Xp, Yp, Zp) and a field of view on the camera (Th1, Th2) - where Th1 is horizontal FOV and Th2 is vertical FOV. Given this information, I'd like to: test if the point is visible (i.e. in the camera's FOV) project the point as the camera would see it I've figured out already that the camera's horizontal view at any given distance is tan(Th1) * distance, but I don't know how to test if the point is visible. Accuracy is not critical. I would prefer a simple solution over a complicated solution, if it works well enough. The computations will be performed by a small microcontroller, which isn't very fast at things like trig functions. P.S. this is not homework, I'm doing this for some game development. It will be integrated with the real world, hence the latitude/longitude/altitude. It involves flying real RC planes through virtual hoops (or chasing virtual targets), so I have to project the positions of these hoops on a display.

  Read the article

• Adsense click bot is click bombing my site

  - by Graham

  I have a site that get's roughly 7,000 - 10,000 page views per day right now. Starting around 1 AM on 7/1/12 I noticed the CTR was rising dramatically. These clicks would be credited then de-credited soon after. So, they were obviously fraudulent clicks. The next day I had about 200 clicks in account with about 100 of them being fraudulent. It's about 3 - 8 per hour evenly dispersed for each of the three ads 24 hours a day. This leads me to believe that it's some sort of Adsense click bot. Also, I removed the ads last evening then put them back up around 3AM and the invalid clicks started within 10 minutes. I signed up for statcounter.com to analyze the exit links on the Adsense. Then I conditionally blocked ads for the IP address of the person / bot I suspected doing this. But, I think that the bot has several proxies to choose from and can refresh IP addresses. I've notified Google through the invalid click form / email 4 times over the past two days in order to let them know I'm aware of the situation and am working on a solution. I've also temporally removed all ads on that site. How can I block a bot like this? Thank you.

  Read the article

• Recommendations for managing DNS issues when hosting customer sites.

  - by Thomas

  I'm working at a company which primarily provides SaaS products but also will host some of our customers corporate websites. My question relates to recommendations for managing DNS for client's domain names. My objectives: Not restrict my ability to change the server's IP address such as might happen when I move my servers to a new host. Not have to contact the customer to change their domain's DNS if I need to change the server's IP address. Often times, customers lose this information or have to track down the one person with any knowledge of the domain settings. Map both .clientdomain.com and www.clientdomain.com to the proper IIS site. However, I'm running into a couple of common problems: Sometimes, the DNS console provided by the client's hosting company does not allow for CNAME records. Sometimes, the DNS console provided by the client's hosting company will not let me create a CNAME entry for .spiffydomain.com because the given hosting company has created a SOA record for that entry or simply requires that .spiffydomain.com be an A record. I believe one solution to #2 is to use a wildcard for a CNAME entry (i.e. *.spiffydomain.com). Is that correct? How do other folks that are hosting many customer's site manage change of DNS entries on their servers?

  Read the article

• My processor is not detected intel core 2 duo

  - by walid

  My processor is not detected intel core 2 duo When I type $uname -m -p I get this i686 unknown I have Ubuntu 10.10 netbook remix but the cat /proc/cpuinfo gives right identification of two processors as below processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping : 6 cpu MHz : 1826.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts tpr_shadow bogomips : 3657.99 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping : 6 cpu MHz : 1826.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts tpr_shadow bogomips : 3657.53 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: The problem is with programs that uses more than one core like virtualbox and bitcoin which refuses to use more than one core Is there anythign wrong or anything that I can do? My installation is from a live usb iso on a USB

  Read the article

• ArchBeat Link-o-Rama for October 22, 2013

  - by OTN ArchBeat

  The road ahead for WebLogic 12c | Edwin Biemond Oracle ACE Edwin Biemond shares his thoughts on announced new features in Oracle WebLogic 12.1.3 & 12.1.4 and compares those upcoming releases to Oracle WebLogic 12.1.2. Oracle BI Apps 11.1.1.7.1 – GoldenGate Integration - Part 2: Setup and Configuration | Michael Rainey Michael Rainey continues his series with another technical article for you GoldenGate fans. There's A Virtual Developer Day in Your Future Have you experienced OTN VDD? Relax, it's not something that requires medical attention. But an OTN Virtual Developer Day event will enlarge your brain with hands-on information on Oracle technologies. Upcoming events will cover Oracle WebLogic and Coherence (Nov 5) and Oracle ADF (Nov 19). My Summary of Oracle Open World 2013 | Luis Weir SOA/Middleware specialist Luis Weir's first trip to Oracle OpenWorld was what you might call a total immersion experience. His blog post includes details about what kept him very, very busy during his OOW13 experience. Live Blog: Book Review of Building Modular Cloud Apps with OSGi by Bert Ertman and Paul Bakker | Lucas Jellema This interesting post from Oracle ACE Director Lucas Jellema is a work in progress. He's updating as he goes. Check it out. Thought for the Day padding-left: 20px; padding-right: 20px;"> "In the information age, you don't teach philosophy as they did after feudalism. You perform it. If Aristotle were alive today he'd have a talk show." — Timothy Leary, American psychologist and writer (October 22, 1920 – May 31, 1996) Source: brainyquote.com

  Read the article

• How to partition Seagate FreeAgent GoFlex 2TB hard disk?

  - by balki

  Hi I bought a new Seagate 2TB external hard disk. I opened the drive's application in my virtual windows, did product registration using the application present in it. I have few questions on how best to use it. The drive by default has some files and folders - setup.exe, System Volume Information, USB 3.0 PC Card Adapter etc,. I copied all the files to my laptop. Is it safe to delete these files? It has a dash board for windows which allows to tune power options, test the drive etc. Will I be able to use the dash board if I put back all these files and mount on windows again? I want to partition and format the hard disk. Data I like to store is Around 10 to 20 GB Files - Virtual box images. Around 4GB Files - Dvd images. Other Movies and personal Files. What is the best filesystem to store very huge files like 10 to 20GB files. So that they are written and accessed fast also best uses the drive's capacity. If I leave one of the partition as ntfs and others to different files systems, will it be able to mount on windows and Will I be able to use the device's dash board? Note: I dont need any encryption for my data. Any other advice on using the hard disk is also welcome.

  Read the article

• Can not access Internet (DNS names do not resolve) after update today

  - by Aras

  I have been using Precise for a few weeks now for work with no problem. Today, I am not able to access any website using either wired or wireless connections. I installed the updates today which included nautilus, xserver, and a new kernel (3.2.0-24). After restarting I no longer was able to browse the Internet using firefox or chrome. Trying to ping google in terminal gives ping: unknown host google.ca I have tried: Connecting to wireless or wired networks (both working on other machines) Restart the machine and boot with previous Kernel Manually configure opendns on my wired connection Restart the network and the laptop and the wireless card Without any success so far. I am not sure where to go next. Please let me know the cause of the issue or help me troubleshoot it. Note that the laptop does receive an ip address, and it can ping ip address of google.ca (74.125.127.94) but not the domain name, or any domain name for that matter. This system was upgraded from 11.10 to 12.04 more two weeks ago.

  Read the article

• iFrame content pageviews not matching parent page pageviews

  - by surfbird0713

  I have a page with content hosted in an iFrame, both using the same GA account ID. When I look at the pages report, the parent page has about 9000 unique views, but the iFrame content only has 3700. Anyone have an idea what could cause that kind of discrepancy? My only guess is that it would be caused by people moving on before the iFrame content has a chance to load, but the average time on page for the host page is 56 seconds, so that doesn't seem possible. This is the page in question: http://cookware.lecreuset.com/cookware/content_le-creuset-lid_10151_-1_20002 The flipbook is hosted in the iFrame on a separate domain. I have each page of the flipbook triggering a virtual pageview to try to evaluate engagement with the book - when the flipbook loads, it fires a pageview for the page it is on, so that is the page I'm using for the 3700 number. I also looked at the source of the iFrame in the pages report, and that number just about matches the virtual pageviews so that piece is consistent. Any ideas on this are much appreciated. Thanks!

  Read the article

• Ubuntu and racadm

  - by lmqcn

  I recently purchased a used poweredge 1850 server and it came with a DRAC card. After wiping the HDD and installing ubuntu server 12.04.3 LTS amd64 on it, I am now trying to gain access to the DRAC which I believe is version 4. I have properly configured the DRAC to use it's own IP on my LAN and when I point my browser to the IP address, I am greeted with the DRAC login page (it has the dell logo and everything). However, after trying the credentials of root/calvin, I was denied access. So I think that the previous owners had set their own password. After doing some reading, it appears that I can reset the credentials to the default using racadm config -g cfgUserAdmin -o cfgUserAdminPassword -i 1 newpassword but upon entering the command, I get this error: bash: /usr/sbin/racadm: No such file or directory This holds true even if I run sudo su prior to running the racadm command. If, however, I run sudo racadm config -g cfgUserAdmin -o cfgUserAdminPassword -i 1 newpassword there are no errors. Yet, when I try to log into the DRAC via the web interface using the credentials of root/newpassword I am still not granted access. I installed the dell utilities via the guide at https://wiki.ubuntu.com/HardwareSupportMachinesServersDellNotes. I first tried to install the 64 bit version that is on the dell repositories, but after that was unsuccessful, I just followed the guide verbatim. No errors were produced in either case. I even followed the information at the bottom of the guide by executing sudo pppd /dev/ttyS1 1382400 crtscts noipdefault noauth lock persist connect 'chat -v "" CLIENT CLIENTSERVER "\\c"' but obviously, replacing the /dev/ttyS1 with the correct information for my system. ls -l /usr/sbin/ | grep racadm yields -rwxr-xr-x 1 root root 87930 Sep 16 04:03 racadm I have tried these credentials after each attempt of changing the password: root/calvin root/newpassword admin/calvin admin/newpassword All have been unsuccessful. What is the next course of action that I should take?

  Read the article

• Changing frontend cache

  - by Utsav

  Our architecture consists of a front-end cache that most read only users obtain their data from directly. The front-end cache sits in front of a farm of webservers that serve pages written in PHP. We need to be able to detect certain conditions at the front-end cache level and pass those values through to the back-end via HTTP headers. For example we would like to manually tag the carrier network based on the IP address. So, for incoming traffic if the user is say coming from an IP address in the range of "41.202.192.0"/19 we would tag them as being a Orange Cameroon user by setting the appropriate HTTP request header, e.g., X-Carrier = "Orange Cameroon". Based on the setting of this header we would like to vary the cache and serve a different banner to the end user. How would you go about doing this? Keep in mind that we don't want to pollute the cache and we also don't want to create too many small cache segments. Assumptions: You can assume that the X-Carrier has already been detected in our cache. So, for the purposes of your test you can just set this value manually in your example script.

  Read the article

• Get Trained on Oracle VM Server for x86 in your timezone or location

  - by Antoinette O'Sullivan

  Register now to get trained on Oracle VM Server for x86 in your location or timezone - and frequently in your local language. You have a choice between the 3 day course, Oracle VM Administration: Oracle VM Server for x86, providing you with a wide range of hands-on exercises or a 1 day seminar, Oracle VM with Oracle VM Server for x86 Seminar. And you have a choice of attending these instructor-led courses Live from your desk through Oracle Universities Live Virtual Classes. For these virtual events there are hundreds of scheduled events across many timezones and there is no need to travel! Schedule details available on the Oracle University portal and visit the Virtualization space. In a classroom with a subset of scheduled events shown below:  Where  When  Delivery Language  3 day Hands-On Course      Dusseldorf, Germany  6 August 2012  German  Munich, Germany  9 July 2012  German  Paris, France  17 October 2012  French  Sydney, Australia  3 September 2012  English  Denver, United States  30 July 2012  English  Roseville, United States  25 June 2012  English  1 day Seminar      Paris, France  4 September 2012  French  Roseville, United States  15 June 2012  English  Mexico City, Mexico  20 June 2012  Spanish To find additional classes, go to the Oracle University portal and visit the Virtualization space. Should you not find an event on the schedule that suits you, register your interest for a specific event/date.

  Read the article

• Configuration tools for multiple monitors for X / Linux

  - by richard

  I have Ubuntu 10.04 running gnome and two monitors. I am wondering if a can get a better multi-monitor configuration tool. The one I have, gnome-display-properties, has too many problems, including: When I swapped my monitors over, the narrower (external) one now on the left. There is a width calculation error, such that I have a virtual monitor the width of the wide-monitor on the narrow-monitor and part of the wide monitor. And a virtual narrow-monitor on the remainder of the wide-monitor. Also the visible mouse pointer does is not aligned with the active spot, an x offset of one monitor width. I would like, in approximate order of importance: nobugs. to be able to select which is primary monitor. to have multiple configurations. configurations to be automatically selected based on which monitors are attached. configurations to be cycled (reliably) when display mode key is pressed. when a display is deactivated, for windows to migrate to remaining monitors. option to not change display resolution when mirroring, but to use side/top blanking bars to pad out screen.

  Read the article

• Implementing a multilanguage AI contest platform

  - by Alejandro Piad

  This is a followup to this question. To sum: I'm implementing an AI contest site, where each user may submit several AI implementations for different games. Think about Google AI Challenge but instead of just having a big event once a year, I would like it more on a league fashion, with all virtual players playing with each other every some close period of time. I want to support as many programming languages as possible. I've seen that contest sites (like codeforces) ask you to submit a source code and interact through stdin and stdout. The first question is: what is the best way of supporting multiple languages? As I see it, I can either ask people to upload some binary/script, and interact either through stdin/*stdout*, or sockets, or the file system; or ask people to submit source code, and wrap it with whatever is necessary for the interaction. I would like to skip the need to compile the code by myself (in the server, I mean), but I am willing to do it if its the "best" choice. I need to comunicate virtual players with each other, or even better, with some intermediary arbiter. The second question is regarding security. If I'm going to be running user code in my server, I want to ensure strict security conditions, like no file system access, no networking, etc. Otherwise it would be a safe heaven for hackers. I will be implementing the engine/arbiter in .NET. I would like to support at least C#, C++, Java and Python for the user's implementations. I'm willing to write interfaces for each of these languages to simplify the user interaction with the system. Thanks in advance.

  Read the article

• Linux Journal Best Virtualization Solution Readers' Choice 2012

  - by Chris Kawalek

  I'm proud to report that in the latest issue of Linux Journal their readers named Oracle VM VirtualBox the "Best Virtualization Solution" for 2012. We're excited to receive this honor and want to thank Linux Journal and their readers for recognizing us!  This is the latest award won by Oracle VM VirtualBox, following a 2011 Bossie Award (best open source software) from InfoWorld, a 2012 Readers' Choice award from Virtualization Review, and several others. These awards help us know that people are using Oracle VM VirtualBox in their day to day work and that it's really useful to them. We truly appreciate their (your!) support. If you already use Oracle VM VirtualBox, you will know all this. But, just in case you haven't tried it yet, here's a few reasons you should download it: Free for personal use and open source. You can download it in minutes and start running multiple operating systems on your Windows PC, Mac, Oracle Solaris system, or Linux PC. It's fast and powerful, and easy to install and use. It has in-depth support for client technologies like USB, virtual CD/DVD, virtual display adapters with various flavors of 2D and 3D acceleration, and much more. If you've ever found yourself in a situation where you were concerned about installing a piece of software because it might be too buggy, or wanted to have a dedicated system to test things on, or wanted to run Windows on a Mac or Oracle Solaris on a PC (or hundreds of other combinations!), or didn't want to install your company's VPN software directly on your home system, then you should definitely give Oracle VM VirtualBox a try. Once you install it, you'll find a myriad of other uses, too. Thanks again to the readers of Linux Journal for selecting Oracle VM VirtualBox as the Best Virtualization Solution for 2012. If you'd like to read the whole article, you can purchase this month's issue over at the Linux Journal website. -Chris

  Read the article

• samba share not on network after upgrading to Ubuntu 12.04LTS.

  - by Sylvain Huard

  I just upgraded an old Ubuntu box to 12.04LTS (machine named A-Ubuntu). This is an upgrade not a format re-install. All the accounts and config were preserved. The basic setup is a local network with 2 Ubuntu machines (let say A-Ubuntu, B-Ubuntu) and a MAC (C-MAC). Before the upgrade, all of them could see each other by their names not only the IP address. The local network has a D-Link Router where everybody is connected with RJ-45 wired etherenet (not wi-fi). Since the A-Ubuntu upgrade, we can't see this machine name on the Network and its name is not on machine list in the D-Link router anymore. We can see it's IP address only. I can't access A-Ubuntu from the other two by its name but I can ping it with its address (192.168.0.109). From A-Ubuntu, I can connect and see the shared samba folders on B-Ubuntu and C-MAC. But from B-Ubuntu and C-MAc, I can't connect to A-Ubuntu. Correct me if I'm wrong but this tells me that Samba should be fine and the real problem is that A-Ubuntu does not advertise its name on the Network so the D-Link does not have it in its table so nobody else finds it. After a lot of googling, I see that it is the job of avahi and mdns to do so. Those packages are running, I checked multiple config files for samba, avahi, mdns to see as if it is like the examples on the WEB and also similar to what I find on the working B-Ubuntu machine. This is the same. I did multiple service restart with samba, avahi, remove the firewall to make sure it does not block the hostname broadcast. I rebooted multiple time to make sure the update I was making were effective. Still, Can't see the A-Ubuntu name on the network. Any idea what it can be?, Where to look next?

  Read the article

< Previous Page | 349 350 351 352 353 354 355 356 357 358 359 360  | Next Page >