Search Results

Search found 18209 results on 729 pages for 'loop device'.

Page 354/729 | < Previous Page | 350 351 352 353 354 355 356 357 358 359 360 361  | Next Page >

• Simpler Times

  - by Simon Moon

  Does anyone else out there long for the simpler days where you needed to move a jumper in the jumper block to set your modem card to use IRQ7 so it would not conflict with the interrupts used by other boards in your PC and your modem card came with a 78 page manual telling you everything you would need to know to write your own driver for the board including a full schematic along with the board layout showing every chip, capacitor, and resistor?  Ahhhhh, the simplicity!I am wrestling with UserPnp issues for a USB software licensing dongle that is needed by some third party software in one of our production applications. Of course, every machine in production is virtual, so it could be anything in the chain of the software application library to the device driver running on the VM to the configuration of the simulated USB port to the implementation of the USB connection and transport in the virtual host to the physical electrical connections in the USB port on the hypervisor.If only there were the virtual analog to a set of needle-nose pliers to move a virtual jumper.Come to think of it, I always used to drop those damn things such that they would land in an irretrievable position under the motherboard anyway.

  Read the article

• Is there a size limit when using UICollectionView as tiled map for iOS game?

  - by Alexander Winn

  I'm working on a turn-based strategy game for iOS, (picture Civilization 2 as an example), and I'm considering using a UICollectionView as my game map. Each cell would be a tile, and I could use the "didSelectCell" method to handle player interaction with each tile. Here's my question: I know that UICollectionViewCells are dequeued and reused by the OS, so does that mean that the map could support an effectively infinitely-large map, so long as only a few cells are onscreen at a time? However many cells were onscreen would be held in memory, and obviously the data source would take up some memory, but would my offscreen map be limited to a certain size or could it be enormous so long as the number of cells visible at any one time wasn't too much for the device to handle? Basically, is there any memory weight to offscreen cells, or do only visible cells have any impact?

  Read the article

• Efficient way of detecting a touched object in a game?

  - by Pin

  Imagine a Sims-like 2D game for a touch based mobile phone where one can interact with virtually any object in the scene. How can I efficiently detect which object is being touched by the player? In my short experience, looping through all the visible objects in the scene and checking if they're touched has so far done the job, but when there may be many many moving objects in the screen that sounds kind of inefficient isn't it? Keeping the visible moving objects list can consume time in itself as one may have to loop through all of them each frame. Other solutions I've thought are: Spatial hashing. Divide the screen as a grid and place the visible objects in the corresponding bucket. Detection of the clicked object is fast but there's additional overhead for placing the objects in the correct bucket each frame. Maintaining a quad-tree. Moving objects have to be rearranged all the time, the previous solution looks better. What is usually done in this case?

  Read the article

• Windows Not Sleeping All Night

  - by John Paul Cook

  Having a computer wake up when you don’t want it to wastes electricity and drains the battery on mobile devices. My desktop had been waking up at night, so I assumed it was some network traffic on my home network. I unchecked Allow this device to wake the computer on my network adapters . Figure 1. Network adapter Power Management tab. That didn’t solve the problem. I included the screen capture in Figure 1 because it could be part of the solution for someone else. To identify the root cause instead...(read more)

  Read the article

• Ensuring ethernet is configured before continuing init scripts.

  - by Pete Ashdown

  Is there a better way to ensure that an ethernet port is configured before continuing through startup init scripts? When 802.3ad bonded ethernet is configured on Ubuntu, it takes some time before it finishes protocol negotiation and starts passing packets, because the networking script just configures, but does not verify that traffic is being passed. As a result, this can throw off some of the other network dependent scripts, like the init for drbd. Right now, I just have a loop that pings the gateway in a startup script, but this seems less than optimal: GATEWAYIP=10.0.0.1 while ( ! ping -c 1 $GATEWAYIP ); do echo gateway not up done

  Read the article

• How will the launcher/button work on a touch panel?

  - by burli

  I'm not sure if Unity has a design problem. If the Launcher is hidden you can bring it to front by moving the mouse over the home button or hit the Super Key. So far, so good. But what is on Tablet Devices with touch panel? Intuitively I would "click" in the corner to show the launcher, but a click will open the Dash. How should that work on a touch device? Do I have to "drag" my finger into the corner? Will touch devices have a "menu button"? Will there be a gesture to show the launcher?

  Read the article

• Implementing a JS templating engine with current PHP project

  - by SeanWM

  I'm currently working on a PHP project and quickly realizing how useful a templating engine would help me. I have a few tables whose table rows are looped out via a PHP loop. Is it possible to use just a JS templating engine (like Handlebarsjs) to also work with these tables? For example: $arr = array('red', 'green', 'blue'); echo '<table>'; foreach($arr as $value) { echo '<tr><td>' . $value . '</td></tr>'; } echo '</table>'; Now I want to add a column via an ajax call using a JS templating engine. Is this possible? Or do I have to use a templating engine for both server side and client side?

  Read the article

• Best tool to understand source

  - by cache

  I have a source code for a project. I am working on porting it to another device as the current source code is for a linux environment. I am having some error on the newly ported code. So i was thinking it would be best to once again understand the whole source code and this will help me localise the errors. Now the problem is that i tried using 'gdb' for linux to debug the code but it does not help. So is there any tool that I can use to trace the program line by line ? By doing so i can understand the program flow. Please Help !

  Read the article

• Disabled WiFi but it keeps re-enabling itself; want it to stay disabled

  - by Mike Uresti

  I have an Alienware X51 desktop with a wireless card, I have it connected via ethernet and want to permanently disable WiFi from ever using itself. When running Windows, I go to device manager and rightclick-disable the Wireless card and that takes care of my problem. Is there a similar method using Ubuntu 14.04? For now, I click on the network icon in the system tray and uncheck 'Enable wifi' but it seems to turn itself back on as I use my computer, I think I have the incident isolated to something with Steam. It seems like after I start the Steam client it always is re-enabled. Hopeful answer: Just disable/remove/block wireless card from ever working.

  Read the article

• My Dog Ate My Surface

  - by Richard Jones

  Working for a Microsoft partner I was very fortunate enough to be given clearance to order a Microsoft Surface RT tablet. Justification, show new device to a customer event this Thursday. All good, time to develop an App. Surface arrived last Wednesday. Overnight, Coco our much loved one year old puppy Larba-Doodle pulled the power chord out of my bag and bit right through the cable (at the power-brick end). A quick re-order to Microsoft saved the day. Demo went great. Surface is fab, Coco; much loved too Laptop bag now placed a bit higher up in our house.

  Read the article

• Skynet Big Data Demo Using Hexbug Spider Robot, Raspberry Pi, and Java SE Embedded (Part 4)

  - by hinkmond

  Here's the first sign of life of a Hexbug Spider Robot converted to become a Skynet Big Data model T-1. Yes, this is T-1 the precursor to the Cyberdyne Systems T-101 (and you know where that will lead to...) It is demonstrating a heartbeat using a simple Java SE Embedded program to drive it. See: Skynet Model T-1 Heartbeat It's alive!!! Well, almost alive. At least there's a pulse. We'll program more to its actions next, and then finally connect it to Skynet Big Data to do more advanced stuff, like hunt for Sara Connor. Java SE Embedded programming makes it simple to create the first model in the long line of T-XXX robots to take on the world. Raspberry Pi makes connecting it all together on one simple device, easy. Next post, I'll show how the wires are connected to drive the T-1 robot. Hinkmond

  Read the article

• How can I enable audio system on Envy 15t-3200

  - by Dean Howell

  I just received my HP Envy 15 (June 2012 model) and I cannot get my audio system to fully function. This laptop has 6 speakers. 1.) 2 speakers on the front of the laptop (Stereo). 2.) 2 speakers above the keyboard, just before the LCD hinges. 3.) 2 Subwoofer speakers underneath the battery cover facing downward. Only the 2 speakers in the front are working. This is a "Beats" audio system. There have been many beats audio laptops before this one, so maybe if someone has experience with those, it might translate to this device.

  Read the article

• Macbook Pro late 2011 screen brightness issue

  - by buchzumlesen

  The keys to set the screen brightness work properly but everytime I reboot, the screen brightness is reverted to 100%, which is very annoying. I've already tried to add the following lines to /etc/rc.local but with no success (only the keyboard backlight stays off): #!/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. echo '1' > /sys/devices/platform/applesmc.768/leds/smc::kbd_backlight/brightness echo '6' > /sys/class/backlight/acpi_video0/brightness rfkill block bluetooth exit 0` This worked for me when I was using Ubuntu 12.04 and also did after the upgrade to 12.10 but then after rebooting the screen brightness always reverted to 100%. Would be nice if anyone knows how to fix this. My device: Macbook Pro 13" Late 2011 Thanks in advance!

  Read the article

• Ubuntu 12.04 wont install on Macbook

  - by user92325

  I've installed Ubuntu on my Macbook before but something went wrong with the updater. So, I had to backup my HDD and format it and reinstall OS X Lion. But here's the thing: Ever since I re-installed my OS I've been trying to get Ubuntu back on the HDD. I partitioned it to 40 GB and set the file system to Ext4. I also recently created a swap partition too and it seems to install correctly. After i installed rEFIt it just has this cute little penguin sitting there. I rebooted and tried to go back to Ubuntu and the penguin still shows up but this time a black screen pops up and it asks me to insert a bootable device and press any key. I'm not sure why this is happening. This is probably the 5th time I've tried to install it. I've even used a different Ubuntu ISO but it still won't boot after the installation.

  Read the article

• Logitech Microphone (AK5370) inaudible volume

  - by Iain Lane

  I bought this microphone from Amazon last week. It's detected just fine in 12.10. I can see it in the sound preferences. The problem is that the volume is so low as to be inaudible, even when turned up to maximum in this dialog. It is working, as I can see that the meter responds to noise, but it's just too low. alsamixer's control is the same, so that doesn't help. I tried messing around in pulseaudio too, but to no avail. In lsusb it's Bus 002 Device 004: ID 0556:0001 Asahi Kasei Microsystems Co., Ltd AK5370 I/F A/D Converter.

  Read the article

• Sound coming out of headphone when running Ubuntu, but not window 7

  - by MrSimon

  I've downloaded Ubuntu yesterday, and I thought that everything went smoothly, until I found out a problem today. When I am running the Ubuntu OS on my laptop, the Samsung RC420, the speaker and the headphone works fine. However, when I am running the Window 7 OS, the speaker works fine, but my headphone will not emit any sound although the laptop has detected that 'a device has been plugged into the audio jack'. The same problem persist when I connect my X-minis as well. I tried updating my sound card drivers, check if they are hidden/disabled/disconnected and everything else. Nothing works :(

  Read the article

• How to use unused space in ubuntu

  - by Ravi.Kumar

  I installed ubuntu on my machine with only 80 GB of memory anticipating that I will remove it later but now I want to keep it forever (until I am frustrated with linux). I have 500 GB in my machine and now I want to use that raw 420 GB of space. How I can I do that ? with "space/memory" I am referring to secondary memory not Ram. Here is output of : sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000dcb77 Device Boot Start End Blocks Id System /dev/sda1 * 2048 136718335 68358144 83 Linux

  Read the article

• How to fix Bluetooth Sound in Ubuntu 11.10

  - by Cerin

  Bluetooth sound worked perfectly for me in Ubuntu 10.04. I recently upgraded to 11.10, and although sound in general works fine, Bluetooth sound almost never works. My headset is paired, and Sound Settings shows it's selected as the output device, but no sound is being output. I've tested the headset with other devices, and confirmed it still works, so the issue is definitely with 11.10. I'm not seeing any explicit errors and I can't find any similar issues with 11.10 through Google. I tried restarting the bluetooth service, but that had no effect. What can I do to fix this?

  Read the article

• No mention of ARM versions of Lubuntu .. on the main website?

  - by Mike

  Just a question for the Lubuntu team really - I am a huge fan of Lubuntu - thank you and congratulations on creating a great distribution. I am just surprised to notice that, the main website doesn't mention that there are ARM versions - or provide any links to download. Is that because they are 'unofficial' in some sense ? I am running Lubuntu 11.10 on an Allwinner A10 device (the MK802) and it works a treat. Don't "hide your light" guys - tell the world Lubuntu is a cracking OS for ARM systems.

  Read the article

• ManagementObjectSearcher error [migrated]

  - by Piotrek

  Some of our customers inform us that in some cases following error appears: System.Management.ManagementException: Blad dostawcy. at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode) at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext() The error is generated while trying to loop through a colection returned by Get() method of the System.Mamangment.ManagementObjectSearcher object. This is the code of my method: private bool PrinterExists(string printerName) { bool retVal = false; SelectQuery q = new SelectQuery("select caption from win32_printer"); using (ManagementObjectSearcher searcher = new ManagementObjectSearcher(q)) { foreach (ManagementObject printer in searcher.Get()) { if(printer["Caption"].ToString() == printerName) { retVal = true; break; } } } return retVal; } It seems that the problem appears only on Windows XP. The only workaround I know is reconstruction of WMI database. It sometimes helps, but unfortunatelly not always. Can anyone tell me what is the reason of this error and how can I fix it?

  Read the article

• ISO Live Session from an External Hard Drive?

  - by amemus

  Is it possible to use an external hard drive to start a live Ubuntu session? Is having an ISO file as the whole content of the first partition of the device enough? Thank you for reading...! EDIT upon reading the first comment to my original question: If I remember correctly, I COULD run a live session of Oneiric Ocelot somehow. It was not from a CD because I failed to burn one, so it must have been from an ISO file. Still very very confused....

  Read the article

• Mounting filesystem with special user id set

  - by qbi

  I want to mount the device /dev/sda3 to the directory /foo/bar/baz. After mounting the directory should have the uid of user johndoe. So I did: sudo -u johndoe mkdir /foo/bar/baz stat -c %U /foo/bar/baz johndoe and added the following line to my /etc/fstab: /dev/sda3 /foo/bar/baz ext4 noexec,noatime,auto,owner,nodev,nosuid,user 0 1 When I do now sudo -u johndoe mount /dev/sda3 the command stat -c %U /foo/bar/baz results in root rather than johndoe. What is the best way to mount this ext4-filesystem with uid johndoe set?

  Read the article

• A real noob question

  - by Jaymz

  I have a Hp mini netbook that has been wiped clean, there is nothing other than the bios on it, it has no DVD and I don't have an external DVD. I can change the boot order to boot from a usb device. I have downloaded ubuntu-12.04.1-desktop-i386 I have one of these http://www.kikatek.com/P100600/34609-IOMEGA-250gb-Select-Portable-HDD-2-5-USB?source=froogle currently formatted to NTFS but I can format to exFAT I have tried Linuxlive USB creator, all that managed to do was dual boot the desktop pc that I'm working off, and when booting on the wiped clean netbook, just left me with a black screen with a blinking cursor I have also tried Unetbootin, this managed to change my 'My Computer' icon to Install Ubuntu (C:) and now again, my desktop pc dual boots with the Wubi software, the Unetbootin, wouldn't let me select my external drive to write to Please I'm a complete idiot, i need a super idiots guide to doing this Regards Jaymz

  Read the article

• Does it makes sense to backup the whole partition as opposed to their files?

  - by maaartinus

  I know that on Windows it's quite futile to try to backup the "C:" partition file-wise and that's why a full partition backup is needed. Is it OK to backup a the root Linux partition file-wise? Are there any downsides? Clarification Here, I don't care about advantages of partial backups. I'm going to do additional separate backups of /home, etc. What I'm interested in here is the comparison of backup of all files from / vs. backup of the whole partition as device What are the advantages of something like dd if=/dev/sda1 ...?

  Read the article

• hPalm and a web-centric strategy

  The acquisition battle has come and gone, and it’s HP that’s become Palm’s new owner. In general this news has been greeted withgladcries,despite (or maybe because) it was so unexpected. In general everybody assumes that the marriage of Palm software and HP hardware will be a good one, and that HP will also release a webOS-based tablet device.However, there’s an interesting dissenting opinion on VisionMobile (a blog I highly recommend, by the way). Guest author Michael Valukenko sees few synergies...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

< Previous Page | 350 351 352 353 354 355 356 357 358 359 360 361  | Next Page >