Search Results

Search found 10215 results on 409 pages for 'ram usage'.

Page 356/409 | < Previous Page | 352 353 354 355 356 357 358 359 360 361 362 363  | Next Page >

  • PostgreSQL, Foreign Keys, Insert speed & Django

    - by Miles
    A few days ago, I ran into an unexpected performance problem with a pretty standard Django setup. For an upcoming feature, we have to regenerate a table hourly, containing about 100k rows of data, 9M on the disk, 10M indexes according to pgAdmin. The problem is that inserting them by whatever method literally takes ages, up to 3 minutes of 100% disk busy time. That's not something you want on a production site. It doesn't matter if the inserts were in a transaction, issued via plain insert, multi-row insert, COPY FROM or even INSERT INTO t1 SELECT * FROM t2. After noticing this isn't Django's fault, I followed a trial and error route, and hey, the problem disappeared after dropping all foreign keys! Instead of 3 minutes, the INSERT INTO SELECT FROM took less than a second to execute, which isn't too surprising for a table <= 20M on the disk. What is weird is that PostgreSQL manages to slow down inserts by 180x just by using 3 foreign keys. Oh, disk activity was pure writing, as everything is cached in RAM; only writes go to the disks. It looks like PostgreSQL is working very hard to touch every row in the referred tables, as 3MB/sec * 180s is way more data than the 20MB this new table takes on disk. No WAL for the 180s case, I was testing in psql directly, in Django, add ~50% overhead for WAL logging. Tried @commit_on_success, same slowness, I had even implemented multi row insert and COPY FROM with psycopg2. That's another weird thing, how can 10M worth of inserts generate 10x 16M log segments? Table layout: id serial primary, a bunch of int32, 3 foreign keys to small table, 198 rows, 16k on disk large table, 1.2M rows, 59 data + 89 index MB on disk large table, 2.2M rows, 198 + 210MB So, am I doomed to either drop the foreign keys manually or use the table in a very un-Django way by defining saving bla_id x3 and skip using models.ForeignKey? I'd love to hear about some magical antidote / pg setting to fix this.

    Read the article

  • How to bundle extension methods requiring configuration in a library

    - by Greg
    Hi, I would like to develop a library that I can re-use to add various methods involved in navigating/searching through a graph (nodes/relationships, or if you like vertexs/edges). The generic requirements would be: There are existing classes in the main project that already implement the equivalent of the graph class (which contains the lists of nodes / relationships), node class and relationship class (which links nodes together) - the main project likely already has persistence mechanisms for the info (e.g. these classes might be built using Entity Framework for persistance) Methods would need to be added to each of these 3 classes: (a) graph class - methods like "search all nodes", (b) node class - methods such as "find all children to depth i", c) relationship class - methods like "return relationship type", "get parent node", "get child node". I assume there would be a need to inform the library with the extending methods the class names for the graph/node/relationships table (as different project might use different names). To some extent it would need to be like how a generics collection works (where you pass the classes to the collection so it knows what they are). Need to be a way to inform the library of which node property to use for equality checks perhaps (e.g. if it were a graph of webpages the equality field to use might be the URI path) I'm assuming that using abstract base classes wouldn't really work as this would tie usage down to have to use the same persistence approach, and same class names etc. Whereas really I want to be able to, for a project that has "graph-like" characteristics, the ability to add graph searching/walking methods to it.

    Read the article

  • Special technology needed for browser based chat?

    - by orokusaki
    On this post, I read about the usage of XMPP. Is this sort of thing necessary, and more importantly, my main question expanded: Can a chat server and client be built efficiently using only standard HTTP and browser technologies (such as PHP and JS, or RoR and JS, etc)? Or, is it best to stick with old protocols like XMPP find a way to integrate them with my application? I looked into CampFire via LiveHTTPHeaders and Firebug for about 5 minutes, and it appears to use Ajax to send a request which is never answered until another chat happens. Is this just CampFire opening a new thread on the server to listen for an update and then returning a response to the request when the thread hears an update? I noticed that they're requesting on a specific port (8043 if memory serves me) which makes me think that they're doing something more complex than just what I mentioned. Also, the URL requested started with /tcp/ which I found interesting. Note: I don't expect to ever have more than 150 users live-chatting in all the rooms combined at the same time. I understand that if I was building a hosted pay for chat service like CampFire with thousands of concurrent users, it would behoove me to invest time in researching special technologies vs trying to reinvent the wheel in a simple way in my app. Also, if you're going to do it with server polling, how often would you personally poll to maximize response without slamming the server?

    Read the article

  • Should a setter return immediately if assigned the same value?

    - by Andrei Rinea
    In classes that implement INotifyPropertyChanged I often see this pattern : public string FirstName { get { return _customer.FirstName; } set { if (value == _customer.FirstName) return; _customer.FirstName = value; base.OnPropertyChanged("FirstName"); } } Precisely the lines if (value == _customer.FirstName) return; are bothering me. I've often did this but I am not that sure it's needed nor good. After all if a caller assigns the very same value I don't want to reassign the field and, especially, notify my subscribers that the property has changed when, semantically it didn't. Except saving some CPU/RAM/etc by freeing the UI from updating something that will probably look the same on the screen/whatever_medium what do we obtain? Could some people force a refresh by reassigning the same value on a property (NOT THAT THIS WOULD BE A GOOD PRACTICE HOWEVER)? 1. Should we do it or shouldn't we? 2. Why?

    Read the article

  • MsSql Server high Resource Waits and Head Blocker

    - by MartinHN
    Hi I have a MS SQL Server 2008 Standard installation running a database for a webshop. The current size of the database is 2.5 GB. Running on Windows 2008 Standard. Dual Intel Xeon X5355 @ 2.00 GHz. 4 GB RAM. When I open the Activity Monitor, I see that I have a Wait Time (ms/sec) of 5000 in the "Other" category. In the Processes list, all connections from the webshop, the Head Blocker value is 1. I see every day that when I try to access the website, it can take 20-30 secs before it even starts to "work". I know that it is not network latency. (I have a 301 redirect from the same server that is executed instantly). When the first request has been served, it seems as if it's not a sleep anymore and every subsequent request is served instantly with the speed of light. The problem was worse two weeks ago, until I changed every query to include WITH (NOLOCK). But I still experience the problem, and the Wait times in the Activity Monitor is about the same. The largest table (Images) has 32764 rows (448576 KB). Some tables exceed 300000 rows, thought they're much smaller in size than the Images table. I have the default clustered index for every primary key column, only. Any ideas?

    Read the article

  • Java Random Slowdowns on Mac OS cont'd

    - by javajustice
    I asked this question a few weeks ago, but I'm still having the problem and I have some new hints. The original question is here: http://stackoverflow.com/questions/1651887/java-random-slowdowns-on-mac-os Basically, I have a java application that splits a job into independent pieces and runs them in separate threads. The threads have no synchronization or shared memory items. The only resources they do share are data files on the hard disk, with each thread having an open file channel. Most of the time it runs very fast, but occasionally it will run very slow for no apparent reason. If I attach a CPU profiler to it, then it will start running quickly again. If I take a CPU snapshot, it says its spending most of its time in "self time" in a function that doesn't do anything except check a few (unshared unsynchronized) booleans. I don't know how this could be accurate because 1, it makes no sense, and 2, attaching the profiler seems to knock the threads out of whatever mode they're in and fix the problem. Also, regardless of whether it runs fast or slow, it always finishes and gives the same output, and it never dips in total cpu usage (in this case ~1500%), implying that the threads aren't getting blocked. I have tried different garbage collectors, different sizings the parts of the memory space, writing data output to non-raid drives, and putting all data output in threads separate the main worker threads. Does anyone have any idea what kind of problem this could be? Could it be the operating system (OS X 10.6.2) ? I have not been able to duplicate it on a windows machine, but I don't have one with a similar hardware configuration.

    Read the article

  • Using SVN post-commit hook to update only files that have been commited

    - by fondie
    I am using an SVN repository for my web development work. I have a development site set up which holds a checkout of the repository. I have set up an SVN post-commit hook so that whenever a commit is made to the repository the development site is updated: cd /home/www/dev_ssl /usr/bin/svn up This works fine but due to the size of the repository the updates take a long time (approx. 3 minutes) which is rather frustrating when making regular commits. What I'd like is to change the post-commit hook to only update those files/directories that have been committed but I don't know how to go about doing this. Updating the "lowest common directory" would probably be the best solution, e.g. If committing the follow files: /branches/feature_x/images/logo.jpg /branches/feature_x/css/screen.css It would update the directory: /branches/feature_x/ Can anyone help me create a solution that achieves this please? Thanks! Update: The repository and development site are located on the same server so network issues shouldn't be involved. CPU usage is very low, and I/O should be ok (it's running on hi-spec dedicated server) The development site is approx. 7.5GB in size and contains approx. 600,000 items, this is mainly due to having multiple branches/tags

    Read the article

  • drop down and post data to data base

    - by DAFFODIL
    This is a form which retrieves data from db and displays them in table. At the beginning of each row there will be a check box. If there are 10 rows fetched, I ii check 5 rows and insert them in to diff db but here when, I click drop down box data is getting in to db automatically,bcoz I use onchange event. Any alternative to prevent this to happen. Data should be inserted only when, I click submit button. Any help will be appreciated <?php $con = mysql_connect("localhost","root",""); if (!$con) { die('Could not connect: ' . mysql_error()); } mysql_select_db("form1", $con); error_reporting(E_ALL ^ E_NOTICE); $nam=$_REQUEST['select1']; $row=mysql_query("select * from inv where name='$nam'"); while($row1=mysql_fetch_array($row)) { $Name=$row1['Name']; $Address =$row1['Address']; $City=$row1['City']; $Pincode=$row1['Pincode']; $No=$row1['No']; $Date=$row1['Date']; $DCNo=$row1['DCNo']; $DcDate=$row1['DcDate']; $YourOrderNo=$row1['YourOrderNo']; $OrderDate=$row1['OrderDate']; $VendorCode=$row1['VendorCode']; $SNo=$row1['SNo']; $descofgoods=$row1['descofgoods']; $Qty=$row1['Qty']; $Rate=$row1['Rate']; $Amount=$row1['Amount']; } ?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /> <title>Untitled Document</title> <script type="text/javascript"> function ram(id) { var q=document.getElementById('qty_'+id).value; var r=document.getElementById('rate_'+id).value; document.getElementById('amt_'+id).value=q*r; } </script> </head> <body> <form id="form1" name="form1" method="post" action=""> <table width="1315" border="0"> <script type="text/javascript"> function g() { form1.submit(); } </script> <tr> <th>Name</th> <th align="left"><select name="select1" onchange="g();"> <option value="" selected="selected">select</option> <?php $row=mysql_query("select Name from inv "); while($row1=mysql_fetch_array($row)) { ?> <option value="<?php echo $row1['Name'];?>"><?php echo $row1['Name'];?></option> <?php } ?> </select></th> </tr> <tr> <th>Address</th> <th align="left"><textarea name="Address"><?php echo $Address;?></textarea></th> </tr> <tr> <th>City</th> <th align="left"><input type="text" name="City" value='<?php echo $City;?>' /></th> </tr> <tr> <th>Pincode</th> <th align="left"><input type="text" name="Pincode" value='<?php echo $Pincode;?>'></th> </tr> <tr> <th>No</th> <th align="left"><input type="text" name="No2" value='<?php echo $No;?>' readonly="" /></th> </tr> <tr> <th>Date</th> <th align="left"><input type="text" name="Date" value='<?php echo $Date;?>' /></th> </tr> <tr> <th>DCNo</th> <th align="left"><input type="text" name="DCNo" value='<?php echo $DCNo;?>' readonly="" /></th> </tr> <tr> <th>DcDate:</th> <th align="left"><input type="text" name="DcDate" value='<?php echo $DcDate;?>' /></th> </tr> <tr> <th>YourOrderNo</th> <th align="left"><input type="text" name="YourOrderNo" value='<?php echo $YourOrderNo;?>' readonly="" /></th> </tr> <tr> <th>OrderDate</th> <th align="left"><input type="text" name="OrderDate" value='<?php echo $OrderDate;?>' /></th> </tr> <tr> <th width="80">VendorCode</th> <th width="1225" align="left"><input type="text" name="VendorCode" value='<?php echo $VendorCode;?>' readonly="" /></th> </tr> </table> <table width="1313" border="0"> <tr> <td width="44">&nbsp;</td> <td width="71">SNO</td> <td width="527">DESCRIPTION</td> <td width="214">QUANTITY</td> <td width="214">RATE/UNIT</td> <td width="217">AMOUNT</td> </tr> <?php $i=1; $row=mysql_query("select * from inv where Name='$nam'"); while($row1=mysql_fetch_array($row)) { $SNo=$row1['SNo']; $descofgoods=$row1['descofgoods']; $Qty=$row1['Qty']; $Rate=$row1['Rate']; $Amount=$row1['Amount']; ?> <tr> <td><input type="checkbox" name="checkbox" value="checkbox" checked="checked"/></td> <td><input type="text" name="No[<?php echo $i?>]" value='<?php echo $SNo;?>' readonly=""/></td> <td><input type="text" name="descofgoods[<?php echo $i?>]" value='<?php echo $descofgoods;?>' /></td> <td><input type="text" name="qty[<?php echo $i?>]" maxlength="50000000" id="qty_<?PHP echo($i) ?>"/></td> <td><input type="text" name="Rate[<?php echo $i?>]" value='<?php echo $Rate;?>' id="rate_<?PHP echo($i) ?>" onclick="ram('<?PHP echo($i) ?>')";></td> <td><input type="text" name="Amount[<?php echo $i?>]" id="amt_<?PHP echo($i) ?>"/></td> </tr> <?php $i++;} ?> <tr> <td><input type="submit" value="submit" header("location:values to be brought for print page.php");/></td> </tr> </table> <label></label> </form> </body> </html> <?php /*error_reporting(E_ALL ^ E_NOTICE); $con = mysql_connect("localhost","root",""); if (!$con) { die('Could not connect: ' . mysql_error()); } mysql_select_db("form1", $con); /*if(checked=checkbox) { mysql_query="INSERT INTO invo (Name, Address, City, Pincode, No, Date, DCNo, DcDate, YourOrderNo, OrderDate, VendorCode, SNo, descofgoods, Qty, Rate, Amount) VALUES ('$_POST[Name]','$_POST[Address]','$_POST[City]','$_POST[Pincode]','$_POST[No]','$_POST[Date]','$_POST[DCNo]','$_POST[DcDate]','$_POST[YourOrderNo]','$_POST[OrderDate]','$_POST[VendorCode]','$_POST[SNo]','$_POST[descofgoods]','$_POST[qty]','$_POST[Rate]','$_POST[Amount]')"; } else { header("location:values to be brought for print page.php"); }*/ header("ins.php"); ?>

    Read the article

  • Jquery - xml parsing

    - by lmkk
    I have the following xml: <?xml version="1.0" encoding="utf-8"?> <Area xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <Scenes> <Scene Index="1" Name="Scene1" /> <Scene Index="2" Name="Scene2" /> </Scenes> </Area> Which i am trying to parse with jquery: <script> $(document).ready(function(){ $.ajax({ type: "GET", url: "list.xml", dataType: "xml", success: function(xml) { $(xml).find('scenes').each(function(){ $(this).find('scene').each(function(){ var name = $(this).attr('name'); $('<div class="items" ></div>').html('<p>'+name+'</p>').appendTo('#page-wrap'); }); }); } }); }); </script> Why is this not working? Help!! first attempt at javascript/jquery This is based on a example I found, but have so far been unable to adapt it to my usage. / Lars

    Read the article

  • Native functions throw UnsatisfiedLinkError in custom view, despite working in main activity

    - by Mark Ingram
    For some reason I can only call native functions from my main activity and not any custom views that I've created. Here is an example file (I followed a tutorial, but renamed the classes http://mindtherobot.com/blog/452/android-beginners-ndk-setup-step-by-step/) See the usage of the native function "getNewString". package com.example.native; import android.app.Activity; import android.app.AlertDialog; import android.content.Context; import android.graphics.Bitmap; import android.graphics.Canvas; import android.os.Bundle; import android.view.View; public class NativeTestActivity extends Activity { static { System.loadLibrary("nativeTest"); } private native String getNewString(); @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); this.setContentView(new BitmapView(this)); String hello = getNewString(); // This line works fine new AlertDialog.Builder(this).setMessage(hello).show(); } } class BitmapView extends View { static { System.loadLibrary("nativeTest"); } private native String getNewString(); public BitmapView(Context context) { super(context); String hello = getNewString(); // This line throws the UnsatisfiedLinkError new AlertDialog.Builder(this.getContext()).setMessage(hello).show(); } } How can I call native functions in my custom views? I've built the application as an Android 2.2 app. I'm running the application on my HTC Desire. I have the latest SDK (9) and latest NDK (r5).

    Read the article

  • java - powermock whenNew doesnt seem to work, calls the actual constructor

    - by user1331243
    I have two final classes that are used in my unit test. I am trying to use whenNew on the constructor of a final class, but I see that it calls the actual constructor. The code is @PrepareForTest({A.class, B.class, Provider.class}) @Test public void testGetStatus() throws Exception { B b = mock(B.class); when(b.getStatus()).thenReturn(1); whenNew(B.class).withArguments(anyString()).thenReturn(b); Provider p = new Provider(); int val = p.getStatus(); assertTrue((val == 1)); } public class Provider { public int getStatus() { B b = new B("test"); return b.getStatus(); } } public final class A { private void init() { // ...do soemthing } private static A a; private A() { } public static A getInstance() { if (a == null) { a = new A(); a.init(); } return a; } } public final class B { public B() { } public B(String s) { this(A.getInstance(), s); } public B(A a, String s) { } public int getStatus() { return 0; } } On debug, I find that its the actual class B instance created and not the mock instance that is returned for new usage and assertion fails. Any pointers on how to get this working. Thanks

    Read the article

  • What would you write in a consitution (law book) for a programmers' country?

    - by Developer Art
    After we have got our great place to talk about professional matters and sozialize online - on SO, I believe the next logical step would be to found our own country! I invite you all to participate and bring together your available resources. We will buy an island, better even a group of island so that we could establish states like .NET territories, Java land, Linux republic etc. We will build a society of programmers (girls - we need you too). To the organizational side, we're going to need some constitution or a law book. I suggest we write it together. I make it a wiki as it should be a cooperative effort. I'll open the work. Section 1. Programmers' rights. Every citizen has a right to an Internet connection 24/7. Every citizen can freely choose the field of interest Section 2. Programmers' obligations. Every citizen must embrace the changing nature of the profession and constanly educate himself Section 3. Law enforcement. Code duplication when can be avoided is punished by limiting the bandwith speed to 64Kbit for a period of one week. Using ugly hacks instead of refactoring code is punished by cutting the Internet connection for a period of one month. Usage of technologies older than 5/10 years is punished by restricting the web access to the sites last updated 5/10 years ago for a period of one month. Please feel free to modify and extend the list. We'll need to have it ready before we proceed formally with the country foundation. A purchase fund will be established shortly. Everyone is invited to participate.

    Read the article

  • JAVASCRIPT ENABLED [closed]

    - by kirchoffs415
    HI, I hope somebody can help, i keep getting the following message when i log on-- Your Javascript is disabled. Limited functionality is available. it will stay for maybe a day sometimes two.I have uninstalled javascript and reinstalled but still the same. Iam using chrome. any help would be gratefull many thanks Dominic p.s. my system spec is as follows System InformationOS Name Microsoft® Windows Vista™ Home Premium Version 6.0.6002 Service Pack 2 Build 6002 Other OS Description Not Available OS Manufacturer Microsoft Corporation System Name DOM-PC System Manufacturer Dell Inc. System Model Inspiron 1545 System Type X86-based PC Processor Pentium(R) Dual-Core CPU T4200 @ 2.00GHz, 2000 Mhz, 2 Core(s), 2 Logical Processor(s) BIOS Version/Date Dell Inc. A05, 25/02/2009 SMBIOS Version 2.4 Windows Directory C:\Windows System Directory C:\Windows\system32 Boot Device \Device\HarddiskVolume3 Locale United Kingdom Hardware Abstraction Layer Version = "6.0.6002.18005" User Name DOM-PC\DOM Time Zone GMT Standard Time Installed Physical Memory (RAM) 3.00 GB Total Physical Memory 2.96 GB Available Physical Memory 1.38 GB Total Virtual Memory 5.89 GB Available Virtual Memory 4.25 GB Page File Space 3.00 GB Page File C:\pagefile.sys My System Specs

    Read the article

  • Sending and receiving IM messages via controller in Rails

    - by Grnbeagle
    Hi, I need a way to handle XMPP communication in my Rails app. My requirements are: Keep an instance of XMPP client running and logged in as one specific user (my bot user) Trigger an event from a controller to send a message and wait for a reply. The message is sent to another machine equipped with a bot so that the reply is supposed to be returned quickly. I installed xmpp4r and backgrounDrb similar to what's described here, but backgrounDrb seems to have evolved and I couldn't get it to wait for a reply. If it has to happen asynchronously, I am willing to use a server-push technology to notify the browser when the reply arrives. To give you a better idea, here are snippets of my code: (In controller) class ServicesController < ApplicationController layout 'simple' def index render :text => "index" end def show @my_service = Service.find(params[:id]) worker = MiddleMan.worker(:jabber_agent_worker) worker.send_request(:arg => {:jid => "someuser@someserver", :cmd => "help"}) render :text => "testing" end end (In worker script) require 'xmpp4r' require 'logger' class JabberAgentWorker < BackgrounDRb::MetaWorker set_worker_name :jabber_agent_worker def create(args = nil) jid = Jabber::JID.new('myagent@myserver') @client = Jabber::Client.new(jid) @client.connect @client.auth('pass') @client.send(Jabber::Presence.new.set_show(:chat).set_status('BackgrounDRb')) @client.add_message_callback do |message| logger.info("**** messaged received: #{message}") # never reaches here end end def send_request(args = nil) to_jid = Jabber::JID.new(args[:jid]) message = Jabber::Message::new(to_jid, args[:cmd]).set_type(:normal).set_id('1') @client.send(message) end end If anyone can tell me any of the following, I'd much appreciate it: issue with my backgrounDrb usage other background process alternatives appropriate for XMPP interactions other ways of achieving this Thanks in advance.

    Read the article

  • Modify XML existing content in C#

    - by Nano HE
    Purpose: I plan to Create a XML file with XmlTextWriter and Modify/Update some Existing Content with XmlNode SelectSingleNode(), node.ChildNode[?].InnerText = someting, etc. After I created the XML file with XmlTextWriter as below. XmlTextWriter textWriter = new XmlTextWriter("D:\\learning\\cs\\myTest.xml", System.Text.Encoding.UTF8); I practiced the code below. But failed to save my XML file. XmlDocument doc = new XmlDocument(); doc.Load("D:\\learning\\cs\\myTest.xml"); XmlNode root = doc.DocumentElement; XmlNode myNode; myNode= root.SelectSingleNode("descendant::books"); .... textWriter.Close(); doc.Save("D:\\learning\\cs\\myTest.xml"); I found it is not good to produce like my way. Is there any suggestion about it? I am not clear about the concepts and usage of both XmlTextWriter and XmlNode in the same project. Thank you for reading and replies.

    Read the article

  • Looking for a fast, compact, streamable, multi-language, strongly typed serialization format

    - by sanity
    I'm currently using JSON (compressed via gzip) in my Java project, in which I need to store a large number of objects (hundreds of millions) on disk. I have one JSON object per line, and disallow linebreaks within the JSON object. This way I can stream the data off disk line-by-line without having to read the entire file at once. It turns out that parsing the JSON code (using http://www.json.org/java/) is a bigger overhead than either pulling the raw data off disk, or decompressing it (which I do on the fly). Ideally what I'd like is a strongly-typed serialization format, where I can specify "this object field is a list of strings" (for example), and because the system knows what to expect, it can deserialize it quickly. I can also specify the format just by giving someone else its "type". It would also need to be cross-platform. I use Java, but work with people using PHP, Python, and other languages. So, to recap, it should be: Strongly typed Streamable (ie. read a file bit by bit without having to load it all into RAM at once) Cross platform (including Java and PHP) Fast Free (as in speech) Any pointers?

    Read the article

  • C# / XNA - Load objects to the memory - how it works?

    - by carl
    Hello I'm starting with C# and XNA. In the "Update" method of the "Game" class I have this code: t = Texture2D.FromFile( [...] ); //t is a 'Texture2D t;' which loads small image. "Update" method is working like a loop, so this code is called many times in a second. Now, when I run my game, it takes 95MB of RAM and it goes slowly to about 130MB (due to the code I've posted, without this code it remains at 95MB), then goes immediately to about 100MB (garbare colletion?) and again goes slowly to 130MB, then immediately to 100MB and so on. So my first question: Can You explain why (how) it works like that? I've found, that if I change the code to: t.Dispose() t = Texture2D.FromFile( [...] ); it works like that: first it takes 95MB and then goes slowly to about 101MB (due to the code) and remains at this level. I don't understand why it takes this 6MB (101-95)... ? I want to make it works like that: load image, release from memory, load image, release from memory and so on, so the program should always takes 95MB (it takes 95MB when image is loaded only once in previous method). Whats instructions should I use? If it is important, the size of the image is about 10KB. Thank You!

    Read the article

  • Programming style question on how to code functions

    - by shawnjan
    Hey all! So, I was just coding a bit today, and I realized that I don't have much consistency when it comes to a coding style when programming functions. One of my main concerns is whether or not its proper to code it so that you check that the input of the user is valid OUTSIDE of the function, or just throw the values passed by the user into the function and check if the values are valid in there. Let me sketch an example: I have a function that lists hosts based on an environment, and I want to be able to split the environment into chunks of hosts. So an example of the usage is this: listhosts -e testenv -s 2 1 This will get all the hosts from the "testenv", split it up into two parts, and it is displaying part one. In my code, I have a function that you pass it in a list, and it returns a list of lists based on you parameters for splitting. BUT, before I pass it a list, I first verify the parameters in my MAIN during the getops process, so in the main I check to make sure there are no negatives passed by the user, I make sure the user didnt request to split into say, 4 parts, but asking to display part 5 (which would not be valid), etc. tl;dr: Would you check the validity of a users input the flow of you're MAIN class, or would you do a check in your function itself, and either return a valid response in the case of valid input, or return NULL in the case of invalid input? Obviously both methods work, I'm just interested to hear from experts as to which approach is better :) Thanks for any comments and suggestions you guys have!

    Read the article

  • What Javascript graphing package will let me plot points against a user-selected coordinate system?

    - by wes
    My customer has some specific requirements for a graph to show in our web app. We use HighCharts elsewhere in the app for more traditional graphing, but it doesn't seem to work for this situation. Their requirements: Allow the user to select a background image, set the scale and origin of the coordinate system. We'll graph our points against the user-defined coordinates. Points can be color coded Mouse-over boxes show more detail about the points Support for zooming and panning, scaling the background appropriately Less importantly: Support for drawing vectors off the points Some of this seems basic, but looking around at different graph packages, I was unable to find any with an example of this kind of usage. I've entertained the thought of just hacking it together in canvas myself, but I've never worked with canvas before so I don't think it would be cost effective. The basics of plotting points with a scaled coordinate system against an image background wouldn't be too hard, but the mouse-over details, zooming and panning sound much more daunting to me. More info: Right now we use jQuery, HighCharts, and ExtJS for our app. We tried flot in the past but switched to HighCharts after flot didn't meet our needs.

    Read the article

  • Winsock WSAAsyncSelect sending without an infinite buffer

    - by Xexr
    Hi, This is more of a design question than a specific code question, I'm sure I am missing the obvious, I just need another set of eyes. I am writing a multi-client server based on WSAAsyncSelect, each connection is made into an object of a connection class I have written which contains associated settings and buffers etc. My question concerns FD_WRITE, I understand how it operates: One FD_WRITE is sent immediately after a connection is established. Thereafter, you should send until WSAEWOULDBLOCK is received at which point you store what is left to send in a buffer, and wait to be told that it is ok to send again. This is where I have a problem, how large do I make this holding buffer within each connections object? The amount of time until a new FD_WRITE is received is unknown, I could be attempting to send a lot of stuff during this period, all the time adding to my outgoing buffer. If I make the buffer dynamic, memory usage could spiral out of control if for whatever reason, I am unable to send() and reduce the buffer. So my question is how do you generally handle this situation? Note I am not talking about the network buffer itself which winsock uses, but one of my own creation used to "queue" up sends. Hope I explained that well enough, thanks all!

    Read the article

  • Problem using Lazy<T> from within a generic abstract class

    - by James Black
    I have a generic class that all my DAO classes derive from, which is defined below. I also have a base class for all my entities, but that is not generic. The method GetIdOrSave is going to be a different type than how I defined SabaAbstractDAO, as I am trying to get the primary key to fulfill the foreign key relationships, so this function goes out to either get the primary key or save the entity and then get the primary key. The last code snippet has a solution on how it will work if I get rid of the generic part, so I think this can be solved by using variance, but I can't figure out how to write an interface that will compile. public abstract class SabaAbstractDAO<T> { ... public K GetIdOrSave<K>(K item, Lazy<SabaAbstractDAO<BaseModel>> lazyitemdao) where K : BaseModel { if (item != null && item.Id.IsNull()) { var itemdao = lazyitemdao.Value; item.Id = itemdao.retrieveID(item); if (item.Id.IsNull()) { return itemdao.SaveData(item); } } return item; } } I am getting this error, when I try to compile: Argument 2: cannot convert from 'System.Lazy<ORNL.HRD.LMS.Dao.SabaCourseDAO>' to 'System.Lazy<ORNL.HRD.LMS.Dao.SabaAbstractDAO<ORNL.HRD.LMS.Models.BaseModel>>' I am trying to call it this way: GetIdOrSave(input.OfferingTemplate, new Lazy<SabaCourseDAO>( () => { return new SabaCourseDAO() { Dao = Dao }; }) ); If I change the definition to this, it works. public K GetIdOrSave<K>(K item, Lazy<SabaCourseDAO> lazyitemdao) where K : BaseModel { So, how can I get this to compile using variance (if needed) and generics, so I can have a very general method that will only work with BaseModel and AbstractDAO<BaseModel>? I expect I should only need to make the change in the method and perhaps abstract class definition, the usage should be fine.

    Read the article

  • Is it right that Strophe.addHandler reads only first node from response?

    - by markcial
    I'm starting to learn strophe library usage and when i use addHandler to parse response it seems to read only first node of xml response so when i receive a xml like that : <body xmlns='http://jabber.org/protocol/httpbind'> <presence xmlns='jabber:client' from='test2@localhost' to='test2@localhost' type='avaliable' id='5593:sendIQ'> <status/> </presence> <presence xmlns='jabber:client' from='test@localhost' to='test2@localhost' xml:lang='en'> <status /> </presence> <iq xmlns='jabber:client' from='test2@localhost' to='test2@localhost' type='result'> <query xmlns='jabber:iq:roster'> <item subscription='both' name='test' jid='test@localhost'> <group>test group</group> </item> </query> </iq> </body> With the handler testHandler used like that : connection.addHandler(testHandler,null,"presence"); function testHandler(stanza){ console.log(stanza); } It only logs : <presence xmlns='jabber:client' from='test2@localhost' to='test2@localhost' type='avaliable' id='5593:sendIQ'> <status/> </presence> What i am missing? is it a right behaviour? Should i add more handlers to get the other stanzas? Thanks for advance

    Read the article

  • querying huge database table takes too much of time in mysql

    - by Vijay
    Hi all, I am running sql queries on a mysql db table that has 110Mn+ unique records for whole day. Problem: Whenever I run any query with "where" clause it takes at least 30-40 mins. Since I want to generate most of data on the next day, I need access to whole db table. Could you please guide me to optimize / restructure the deployment model? Site description: mysql Ver 14.12 Distrib 5.0.24, for pc-linux-gnu (i686) using readline 5.0 4 GB RAM, Dual Core dual CPU 3GHz RHEL 3 my.cnf contents : [root@reports root]# cat /etc/my.cnf [mysqld] datadir=/data/mysql/data/ socket=/tmp/mysql.sock sort_buffer_size = 2000000 table_cache = 1024 key_buffer = 128M myisam_sort_buffer_size = 64M # Default to using old password format for compatibility with mysql 3.x # clients (those using the mysqlclient10 compatibility package). old_passwords=1 [mysql.server] user=mysql basedir=/data/mysql/data/ [mysqld_safe] err-log=/data/mysql/data/mysqld.log pid-file=/data/mysql/data/mysqld.pid [root@reports root]# DB table details: CREATE TABLE `RAW_LOG_20100504` ( `DT` date default NULL, `GATEWAY` varchar(15) default NULL, `USER` bigint(12) default NULL, `CACHE` varchar(12) default NULL, `TIMESTAMP` varchar(30) default NULL, `URL` varchar(60) default NULL, `VERSION` varchar(6) default NULL, `PROTOCOL` varchar(6) default NULL, `WEB_STATUS` int(5) default NULL, `BYTES_RETURNED` int(10) default NULL, `RTT` int(5) default NULL, `UA` varchar(100) default NULL, `REQ_SIZE` int(6) default NULL, `CONTENT_TYPE` varchar(50) default NULL, `CUST_TYPE` int(1) default NULL, `DEL_STATUS_DEVICE` int(1) default NULL, `IP` varchar(16) default NULL, `CP_FLAG` int(1) default NULL, `USER_LOCATE` bigint(15) default NULL ) ENGINE=MyISAM DEFAULT CHARSET=latin1 MAX_ROWS=200000000; Thanks in advance! Regards,

    Read the article

  • Failure remediation strategy for File I/O

    - by Brett
    I'm doing buffered IO into a file, both read and write. I'm using fopen(), fseeko(), standard ANSI C file I/O functions. In all cases, I'm writing to a standard local file on a disk. How often do these file I/O operations fail, and what should the strategy be for failures? I'm not exactly looking for stats, but I'm looking for a general purpose statement on how far I should go to handle error conditions. For instance, I think everyone recognizes that malloc() could and probably will fail someday on some user's machine and the developer should check for a NULL being returned, but there is no great remediation strategy since it probably means the system is out of memory. At least, this seems to be the approach taken with malloc() on desktop systems, embedded systems are different. Likewise, is it worth reattempting a file I/O operation, or should I just consider a failure to be basically unrecoverable, etc. I would appreciate some code samples demonstrating proper usage, or a library guide reference that indicates how this is to be handled. Any other data is, of course, welcome.

    Read the article

  • Using PHP as template language

    - by Kunal
    I wrote up this quick class to do templating via PHP -- I was wondering if this is easily exploitable if I were ever to open up templating to users (not the immediate plan, but thinking down the road). class Template { private $allowed_methods = array( 'if', 'switch', 'foreach', 'for', 'while' ); private function secure_code($template_code) { $php_section_pattern = '/\<\?(.*?)\?\>/'; $php_method_pattern = '/([a-zA-Z0-9_]+)[\s]*\(/'; preg_match_all($php_section_pattern, $template_code, $matches); foreach (array_unique($matches[1]) as $index => $code_chunk) { preg_match_all($php_method_pattern, $code_chunk, $sub_matches); $code_allowed = true; foreach ($sub_matches[1] as $method_name) { if (!in_array($method_name, $this->allowed_methods)) { $code_allowed = false; break; } } if (!$code_allowed) { $template_code = str_replace($matches[0][$index], '', $template_code); } } return $template_code; } public function render($template_code, $params) { extract($params); ob_start(); eval('?>'.$this->secure_code($template_code).'<?php '); $result = ob_get_contents(); ob_end_clean(); return $result; } } Example usage: $template_code = '<?= $title ?><? foreach ($photos as $photo): ?><img src="<?= $photo ?>"><? endforeach ?>'; $params = array('title' => 'My Title', 'photos' => array('img1.jpg', 'img2.jpg')); $template = new Template; echo $template->render($template_code, $params); The idea here is that I'd store the templates (PHP code) in the database, and then run it through the class which uses regular expressions to only allow permitted methods (if, for, etc.). Anyone see an obvious way to exploit this and run arbitrary PHP? If so, I'll probably go the more standard route of a templating language such as Smarty...

    Read the article

< Previous Page | 352 353 354 355 356 357 358 359 360 361 362 363  | Next Page >