scripting interface - Page 356

How do I determine if my controller is in IDE or AHCI mode in Linux?

- by philcolbourn

I have an old MacBook Pro 4,1 (early 2008) - but I suspect an answer would apply to many MacBook Pros. It has an Intel IDE/SATA controller (ICH8M/ICH8M-E). I have installed a patched MBR that is supposed to put my controller into AHCI mode. It does this by setting some controller port value that I don't understand. This seems to work as I get this from lspci: 00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) 00:1f.2 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03) Now most, perhaps all, sites that provide a solution (enabling AHCI) suggest that after a sleep/wake cycle that a controller will revert to IDE mode due to how Apple support Windows. They recommend disabling sleep. From author of patchedcode.bin I think Enabling AHCI for Windows on MacBooks NB: I do not have bootcamp installed and I do not have Windows installed. Is there a way to prove that my controller is in IDE or AHCI mode? Background Data Using patchedcode.bin MBR I get this in syslog: Jun 12 22:33:22 max kernel: [ 1.860955] ahci 0000:00:1f.2: version 3.0 Jun 12 22:33:22 max kernel: [ 1.861052] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X Jun 12 22:33:22 max kernel: [ 1.861117] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode Jun 12 22:33:22 max kernel: [ 1.861120] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems Jun 12 22:33:22 max kernel: [ 1.861130] ahci 0000:00:1f.2: setting latency timer to 64 Jun 12 22:33:22 max kernel: [ 1.880880] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Jun 12 22:33:22 max kernel: [ 1.880983] scsi2 : ahci Jun 12 22:33:22 max kernel: [ 1.884552] scsi3 : ahci Jun 12 22:33:22 max kernel: [ 1.886932] scsi4 : ahci Jun 12 22:33:22 max kernel: [ 1.886998] ata3: SATA max UDMA/133 abar m2048@0xdb504000 port 0xdb504100 irq 45 Jun 12 22:33:22 max kernel: [ 1.887000] ata4: DUMMY Jun 12 22:33:22 max kernel: [ 1.887002] ata5: DUMMY Jun 12 22:33:22 max kernel: [ 2.204103] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jun 12 22:33:22 max kernel: [ 2.204656] ata3.00: ATA-8: FUJITSU MHY2200BH, 0081000D, max UDMA/100 Jun 12 22:33:22 max kernel: [ 2.204662] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32), AA Jun 12 22:33:22 max kernel: [ 2.205324] ata3.00: configured for UDMA/100 Jun 12 22:33:22 max kernel: [ 2.205554] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHY2200B 0081 PQ: 0 ANSI: 5 Using my original MBR I get this from syslog: Jun 13 18:07:13 max kernel: [ 0.622861] ata_piix 0000:00:1f.1: version 2.13 Jun 13 18:07:13 max kernel: [ 0.622869] ata_piix 0000:00:1f.1: power state changed by ACPI to D0 Jun 13 18:07:13 max kernel: [ 0.622924] ata_piix 0000:00:1f.1: setting latency timer to 64 Jun 13 18:07:13 max kernel: [ 0.623339] scsi0 : ata_piix Jun 13 18:07:13 max kernel: [ 0.623730] scsi1 : ata_piix Jun 13 18:07:13 max kernel: [ 0.623765] ata1: PATA max UDMA/100 cmd 0x8108 ctl 0x811c bmdma 0x80e0 irq 21 Jun 13 18:07:13 max kernel: [ 0.623767] ata2: PATA max UDMA/100 cmd 0x8100 ctl 0x8118 bmdma 0x80e8 irq 21 Jun 13 18:07:13 max kernel: [ 0.623810] ata_piix 0000:00:1f.2: MAP [ Jun 13 18:07:13 max kernel: [ 0.623811] P0 -- -- -- ] Jun 13 18:07:13 max kernel: [ 0.623866] ata_piix 0000:00:1f.2: setting latency timer to 64 Jun 13 18:07:13 max kernel: [ 0.624241] scsi2 : ata_piix Jun 13 18:07:13 max kernel: [ 0.624558] scsi3 : ata_piix Jun 13 18:07:13 max kernel: [ 0.624862] ata3: SATA max UDMA/133 cmd 0x80f8 ctl 0x8114 bmdma 0x8020 irq 18 Jun 13 18:07:13 max kernel: [ 0.624865] ata4: SATA max UDMA/133 cmd 0x80f0 ctl 0x8110 bmdma 0x8028 irq 18 Jun 13 18:07:13 max kernel: [ 1.208879] ata3.00: ATA-8: FUJITSU MHY2200BH, 0081000D, max UDMA/100 Jun 13 18:07:13 max kernel: [ 1.208882] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32) Jun 13 18:07:13 max kernel: [ 1.208961] ata1.01: ATAPI: MATSHITA DVD+/-RW UJ-867S, 1.00, max UDMA/33 Jun 13 18:07:13 max kernel: [ 1.216186] ata3.00: configured for UDMA/100 Jun 13 18:07:13 max kernel: [ 1.224396] ata1.01: configured for UDMA/33

Read the article

Managing access to multiple linux system

- by Swartz

A searched for answers but have found nothing on here... Long story short: a non-profit organization is in dire need of modernizing its infrastructure. First thing is to find an alternatives to managing user accounts on a number of Linux hosts. We have 12 servers (both physical and virtual) and about 50 workstations. We have 500 potential users for these systems. The individual who built and maintained the systems over the years has retired. He wrote his own scripts to manage it all. It still works. No complaints there. However, a lot of the stuff is very manual and error-prone. Code is messy and after updates often needs to be tweaked. Worst part is there is little to no docs written. There are just a few ReadMe's and random notes which may or may not be relevant anymore. So maintenance has become a difficult task. Currently accounts are managed via /etc/passwd on each system. Updates are distributed via cron scripts to correct systems as accounts are added on the "main" server. Some users have to have access to all systems (like a sysadmin account), others need access to shared servers, while others may need access to workstations or only a subset of those. Is there a tool that can help us manage accounts that meets the following requirements? Preferably open source (i.e. free as budget is VERY limited) mainstream (i.e. maintained) preferably has LDAP integration or could be made to interface with LDAP or AD service for user authentication (will be needed in the near future to integrate accounts with other offices) user management (adding, expiring, removing, lockout, etc) allows to manage what systems (or group of systems) each user has access to - not all users are allowed on all systems support for user accounts that could have different homedirs and mounts available depending on what system they are logged into. For example sysadmin logged into "main" server has main://home/sysadmin/ as homedir and has all shared mounts sysadmin logged into staff workstations would have nas://user/s/sysadmin as homedir(different from above) and potentially limited set of mounts, a logged in client would have his/her homedir at different location and no shared mounts. If there is an easy management interface that would be awesome. And if this tool is cross-platform (Linux / MacOS / *nix), that will be a miracle! I have searched the web and so have found nothing suitable. We are open to any suggestions. Thank you. EDIT: This question has been incorrectly marked as a duplicate. The linked to answer only talks about having same homedirs on all systems, whereas we need to have different homedirs based on what system user is currently logged into(MULTIPLE homedirs). Also access needs to be granted only to some machinees not the whole lot. Mods, please understand the full extent of the problem instead of merely marking it as duplicate for points...

Read the article

How to deploy custom MBean to Tomcat?

- by Christian

Hi, I'm trying to deploy a custom mbean to a tomcat. This mbean is not part of a webapp. It should be instantiated when tomcat starts. My problem is, I can't find any complete documentation about how to deploy such a mbean. I'm getting different exceptions, depending on my configuration. Has anyone hints, a complete documentation or has implemented a mbean by himself and can post an example? I configured tomcat to read a configuration from his conf directory: <Engine name="Catalina" defaultHost="localhost" mbeansFile="${catalina.base}/conf/mbeans-descriptors.xml"> The content is as follows: <?xml version="1.0"?>   <mbeans-descriptors> <mbean name="Performance" description="Caculate JVM throughput" type="Performance"> <attribute name="throughput" description="calculated throughput (ratio between gc times and uptime of JVM)" type="double" writeable="false"/> </mbean> </mbeans-descriptors> When name in the xml file and class name match, I get this excption: SEVERE: Error creating mbean Performance javax.management.MalformedObjectNameException: Key properties cannot be empty at javax.management.ObjectName.construct(ObjectName.java:467) at javax.management.ObjectName.<init>(ObjectName.java:1403) at org.apache.tomcat.util.modeler.modules.MbeansSource.execute(MbeansSource.java:202) at org.apache.tomcat.util.modeler.modules.MbeansSource.load(MbeansSource.java:137) at org.apache.catalina.core.StandardEngine.readEngineMbeans(StandardEngine.java:517) at org.apache.catalina.core.StandardEngine.init(StandardEngine.java:321) at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:411) at org.apache.catalina.core.StandardService.start(StandardService.java:519) at org.apache.catalina.core.StandardServer.start(StandardServer.java:710) at org.apache.catalina.startup.Catalina.start(Catalina.java:581) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:289) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.commons.daemon.support.DaemonLoader.start(DaemonLoader.java:177) When changing the name attribute in the xml file to test.example:type=Performance, I get this exception: SEVERE: Error creating mbean test.example:type=Performance javax.management.NotCompliantMBeanException: MBean class must have public constructor at com.sun.jmx.mbeanserver.Introspector.testCreation(Introspector.java:127) at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.createMBean(DefaultMBeanServerInterceptor.java:284) at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.createMBean(DefaultMBeanServerInterceptor.java:199) at com.sun.jmx.mbeanserver.JmxMBeanServer.createMBean(JmxMBeanServer.java:393) at org.apache.tomcat.util.modeler.modules.MbeansSource.execute(MbeansSource.java:207) at org.apache.tomcat.util.modeler.modules.MbeansSource.load(MbeansSource.java:137) at org.apache.catalina.core.StandardEngine.readEngineMbeans(StandardEngine.java:517) at org.apache.catalina.core.StandardEngine.init(StandardEngine.java:321) at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:411) at org.apache.catalina.core.StandardService.start(StandardService.java:519) at org.apache.catalina.core.StandardServer.start(StandardServer.java:710) at org.apache.catalina.startup.Catalina.start(Catalina.java:581) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:289) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.commons.daemon.support.DaemonLoader.start(DaemonLoader.java:177) The documentation from apache is not really helpful, as it just explains a small part. I'm aware of this question but it doesn't help me. The answer I gave worked just for a short time, after that I got some other exceptions. For additional info, the java interface public interface PerformanceMBean { public double getThroughput(); } and implementing class /* some import statements */ public class Performance implements PerformanceMBean { public double getThroughput() { ... } }

Read the article

how to make bridge networking with KVM work in Fedora19

- by netllama

I'm attempting to get several virtual machines setup on a Fedora-19 host system, with the traditional bridge network devices (br0, br1, etc). I've done this many times before with older versions of Fedora (16, 14, etc), and it just works. However, for reasons that I cannot figure out, the bridge doesn't seem to be working in Fedora19. While I can successfully connect to the outside world (local network + internet) from inside a VM, nothing can communicate with the VM from outside (local network). I'm referring to something as trivial as pinging. From inside the VM, I can ping anything successfully (0% packet loss). However, from outside the VM (on the host, or any other system on the same network), I see 100% packet loss when pinging the IP address of the VM. My first question is simply, does anyone else have this working successfully in F19? And if so, what steps did you need to follow? I'm not using NetworkManager at all, its all the network service. There are no firewalls involved anywhere (iptables & firewall services are currently disabled). Here's the current host configuration: # brctl show bridge name bridge id STP enabled interfaces br0 8000.38eaa792efe5 no em2 vnet1 br1 8000.38eaa792efe6 no em3 br2 8000.38eaa792efe7 no em4 vnet0 virbr0 8000.525400db3ebf yes virbr0-nic # more /etc/sysconfig/network-scripts/ifcfg-em2 TYPE=Ethernet BRIDGE="br0" NAME=em2 DEVICE="em2" UUID=aeaa839e-c89c-4d6e-9daa-79b6a1b919bd ONBOOT=yes HWADDR=38:EA:A7:92:EF:E5 NM_CONTROLLED="no" # more /etc/sysconfig/network-scripts/ifcfg-br0 TYPE=Bridge NM_CONTROLLED="no" BOOTPROTO=dhcp NAME=br0 DEVICE="br0" ONBOOT=yes # ifconfig em2 ;ifconfig br0 em2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::3aea:a7ff:fe92:efe5 prefixlen 64 scopeid 0x20<link> ether 38:ea:a7:92:ef:e5 txqueuelen 1000 (Ethernet) RX packets 100093 bytes 52354831 (49.9 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 25321 bytes 15791341 (15.0 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device memory 0xf7d00000-f7e00000 br0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 10.31.99.226 netmask 255.255.252.0 broadcast 10.31.99.255 inet6 fe80::3aea:a7ff:fe92:efe5 prefixlen 64 scopeid 0x20<link> ether 38:ea:a7:92:ef:e5 txqueuelen 0 (Ethernet) RX packets 19619 bytes 1963328 (1.8 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 11 bytes 1074 (1.0 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 Relevant section from /etc/libvirt/qemu/foo.xml (one of the VMs with this problem): <interface type='bridge'> <mac address='52:54:00:26:22:9d'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> # ps -ef | grep qemu qemu 1491 1 82 13:25 ? 00:42:09 /usr/bin/qemu-system-x86_64 -machine accel=kvm -name cuda-linux64-build5 -S -machine pc-0.13,accel=kvm,usb=off -cpu SandyBridge,+pdpe1gb,+osxsave,+dca,+pcid,+pdcm,+xtpr,+tm2,+est,+smx,+vmx,+ds_cpl,+monitor,+dtes64,+pbe,+tm,+ht,+ss,+acpi,+ds,+vme -m 16384 -smp 6,sockets=6,cores=1,threads=1 -uuid 6e930234-bdfd-044d-2787-22d4bbbe30b1 -no-user-config -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/cuda-linux64-build5.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=localtime -no-shutdown -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -drive file=/var/lib/libvirt/images/cuda-linux64-build5.img,if=none,id=drive-virtio-disk0,format=raw,cache=writeback -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 -netdev tap,fd=25,id=hostnet0,vhost=on,vhostfd=26 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:26:22:9d,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -vnc 127.0.0.1:1 -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5 I can provide additional information, if requested. thanks!

Read the article

Cannot read status the monit daemon, even with allowed group

- by jefflunt

I cannot seem to get monit status or other CLI commands to work. I've built monit v5.8 to run on a Raspberry Pi. I'm able to add services to be monitored, and the web interface can be accessed just fine, as I've set it up for public read-only access (it's a test server, not my final production setup, so not a big deal right now). Problem is, when I run monit status while logged in as root I get: # monit status monit: cannot read status from the monit daemon I also have monit started on boot via this /etc/inittab file entry: mo:2345:respawn:/usr/local/bin/monit -Ic /etc/monitrc I've verified that monit is running, and I'm getting email alerts anytime I either kill the monit process manually, or reboot my raspberry pi. So, next I check my monitrc file permissions to see which group is allowed access. # ls -al /etc/monitrc -rw------- 1 root root 2359 Aug 24 14:48 /etc/monitrc Here's my relevant allow section of the control file. set httpd port 80 allow [omitted] readonly allow @root allow localhost allow 0.0.0.0/0.0.0.0 Also tried setting permissions on this file to 640 to allow group read permissions, but no matter what I try I either get the same error as noted above, or when the permissions are set to 640 I get: # monit status monit: The control file '/etc/monitrc' must have permissions no more than -rwx------ (0700); right now permissions are -rw-r----- (0640). What am I missing here? I know that the httpd must be enabled, as that's the interface that the CLI uses to get information (or so I've read), so I've done that. And in terms of monit doing its monitoring job and sending email alerts, that's all working as well. Here's my entire monitrc file - again, this is version v5.8, and it was build with both PAM and SSL support. The process runs under the root user: # Global settings set daemon 300 with start delay 5 set logfile /var/log/monit.log set pidfile /var/run/monit.pid set idfile /var/run/.monit.id set statefile /var/run/.monit.state # Mail alerts ## Set the list of mail servers for alert delivery. Multiple servers may be ## specified using a comma separator. If the first mail server fails, Monit # will use the second mail server in the list and so on. By default Monit uses # port 25 - it is possible to override this with the PORT option. # set mailserver smtp.gmail.com port 587 username [omitted] password [omitted] using tlsv1 ## Send status and events to M/Monit (for more informations about M/Monit ## see http://mmonit.com/). By default Monit registers credentials with ## M/Monit so M/Monit can smoothly communicate back to Monit and you don't ## have to register Monit credentials manually in M/Monit. It is possible to ## disable credential registration using the commented out option below. ## Though, if safety is a concern we recommend instead using https when ## communicating with M/Monit and send credentials encrypted. # # set mmonit http://monit:[email protected]:8080/collector # # and register without credentials # Don't register credentials # # ## Monit by default uses the following format for alerts if the the mail-format ## statement is missing:: set mail-format { from: [email protected] subject: $SERVICE $DESCRIPTION message: $EVENT Service: $SERVICE Date: $DATE Action: $ACTION Host: $HOST Description: $DESCRIPTION Monit instance provided by chicagomeshnet.com } # Web status page set httpd port 80 allow [omitted] readonly allow @root allow localhost allow 0.0.0.0/0.0.0.0 ## You can set alert recipients whom will receive alerts if/when a ## service defined in this file has errors. Alerts may be restricted on ## events by using a filter as in the second example below.

Read the article

Issue in setting up VPN connection (IKEv1) using android (ICS vpn client) with Strongswan 4.5.0 server

- by Kushagra Bhatnagar

I am facing issues in setting up VPN connection(IKEv1) using android (ICS vpn client) and Strongswan 4.5.0 server. Below is the set up: Strongswan server is running on ubuntu linux machine which is connected to some wifi hotspot. Using the steps in this guide link, I generated CA, server and client certificate. Once certificates are generated, following (clientCert.p12 and caCert.pem) are sent to mobile via mail and installed on android device. Below are the ip addresses assigned to various interfaces Linux server wlan0 interface ip where server is running: 192.168.43.212, android device eth0 interface ip address: 192.168.43.62; Android device is also attached with the same wifi hotspot. On the Android device, I uses IPsec Xauth RSA option for setting up VPN authentication configuration. I am using the following ipsec.conf configuration: # basic configuration config setup plutodebug=all # crlcheckinterval=600 # strictcrlpolicy=yes # cachecrls=yes nat_traversal=yes # charonstart=yes plutostart=yes # Add connections here. # Sample VPN connections conn ios1 keyexchange=ikev1 authby=xauthrsasig xauth=server left=%defaultroute leftsubnet=0.0.0.0/0 leftfirewall=yes leftcert=serverCert.pem right=192.168.43.62 rightsubnet=10.0.0.0/24 rightsourceip=10.0.0.2 rightcert=clientCert.pem pfs=no auto=add With the above configurations when I enable VPN on android device, VPN connection is not successful and it gets timed out in Authentication phase. I ran wireshark on both the android device and strongswan server, from the tcpdump below are the observations. Initially Identity Protection (Main mode) exchanges happens between device and server and all are successful. After all successful Identity Protection (Main mode) exchanges server is sending Transaction (Config mode) to device. In reply android device is sending Informational message instead of Transaction (Config mode) message. Further server is keep on sending Transaction (Config mode) message and device is again sending Identity Protection (Main mode) messages. Finally timeout happens and connection fails. I also capture Strongswan server logs and below are the snippets from the server logs which also verifies the same(described above). Apr 27 21:09:40 Linux pluto[12105]: | **parse ISAKMP Message: Apr 27 21:09:40 Linux pluto[12105]: | initiator cookie: Apr 27 21:09:40 Linux pluto[12105]: | 06 fd 61 b8 86 82 df ed Apr 27 21:09:40 Linux pluto[12105]: | responder cookie: Apr 27 21:09:40 Linux pluto[12105]: | 73 7a af 76 74 f0 39 8b Apr 27 21:09:40 Linux pluto[12105]: | next payload type: ISAKMP_NEXT_HASH Apr 27 21:09:40 Linux pluto[12105]: | ISAKMP version: ISAKMP Version 1.0 Apr 27 21:09:40 Linux pluto[12105]: | exchange type: ISAKMP_XCHG_INFO Apr 27 21:09:40 Linux pluto[12105]: | flags: ISAKMP_FLAG_ENCRYPTION Apr 27 21:09:40 Linux pluto[12105]: | message ID: a2 80 ad 82 Apr 27 21:09:40 Linux pluto[12105]: | length: 92 Apr 27 21:09:40 Linux pluto[12105]: | ICOOKIE: 06 fd 61 b8 86 82 df ed Apr 27 21:09:40 Linux pluto[12105]: | RCOOKIE: 73 7a af 76 74 f0 39 8b Apr 27 21:09:40 Linux pluto[12105]: | peer: c0 a8 2b 3e Apr 27 21:09:40 Linux pluto[12105]: | state hash entry 25 Apr 27 21:09:40 Linux pluto[12105]: | state object not found Apr 27 21:09:40 Linux pluto[12105]: packet from 192.168.43.62:500: Informational Exchange is for an unknown (expired?) SA Apr 27 21:09:40 Linux pluto[12105]: | next event EVENT_RETRANSMIT in 10 seconds for #9 Can anyone please provide update on this issue. Why the VPN connection gets timed out and why the ISAKMP exchanges are not proper between Android and strongswan server.

Read the article

Tuning performance of Ubuntu 10.04 on Compaq Evo W4000.

- by Fantomas

Hi, I got this computer free and installed Ubuntu 10.04 on it + updates, plus followed the following tutorial all the way: http://www.unixmen.com/linux-tutorials/937-things-to-do-after-installing-ubuntu-1004-lts-lucid-lynx I love the Docky which comes with it, but the computer has been running rather slowly. The System: kernel 2.6.32-22-generic Gnome 2.30.0 (I like Gnome!) Memory: 1GB Processor: Intel (R) Pentium (R) 4 CPU 1700 MHz (needless to say, it is 32 bit). I think I dedicated 128 Mb to video memory while installing, but cannot find this setting now. I did also install an NVidia driver for the 3D card, so I probably want to reclaim that memory back. I want to trim the fat but I also want to keep some of the sex appeal of Ubuntu 10.04. I will gift this computer to a friend, who will use it for Internet, music, videos, word processing, Skype and instant messaging - he is non-technical, so this hardware and Linux should work for him; I just need to speed it up while keeping the good software and having a nice UI. I sort of know my way around Linux, but not that well. Feel free to ask me to run particular commands if you want more info. For starters, here are the services below. Which ones can I kill and how? What else can go? There is no need to run ssh or ftp or http or ntp servers. As I said before, this computer is for non-technical person. There is also absolutely no bluetooth or wireless networking needed - it will feed off a regular ethernet cable. What I do not want to do is reinstall some other distro or recompile a kernel. I want to make it 80% perfect spending 20% of the energy :) Thanks! $ service --status-all [ ? ] acpi-support [ ? ] acpid [ ? ] alsa-mixer-save [ ? ] anacron [ - ] apparmor [ ? ] apport [ ? ] atd [ ? ] avahi-daemon [ ? ] binfmt-support [ - ] bluetooth [ - ] bootlogd [ - ] brltty [ ? ] console-setup [ ? ] cron [ + ] cups [ ? ] dbus [ ? ] dmesg [ ? ] dns-clean [ ? ] failsafe-x [ - ] fancontrol [ ? ] gdm [ - ] grub-common [ ? ] hostname [ ? ] hwclock [ ? ] hwclock-save [ ? ] irqbalance [ - ] kerneloops [ ? ] killprocs [ - ] lm-sensors [ ? ] module-init-tools [ ? ] network-interface [ ? ] network-interface-security [ ? ] network-manager [ ? ] networking [ ? ] ondemand [ ? ] pcmciautils [ ? ] plymouth [ ? ] plymouth-log [ ? ] plymouth-splash [ ? ] plymouth-stop [ ? ] pppd-dns [ ? ] procps [ + ] pulseaudio [ ? ] rc.local [ - ] rsync [ ? ] rsyslog [ - ] saned [ ? ] screen-cleanup [ ? ] sendsigs [ ? ] speech-dispatcher [ ? ] stop-bootlogd [ ? ] stop-bootlogd-single [ ? ] udev [ ? ] udev-finish [ ? ] udevmonitor [ ? ] udevtrigger [ ? ] ufw [ ? ] umountfs [ ? ] umountnfs.sh [ ? ] umountroot [ ? ] unattended-upgrades [ - ] urandom [ + ] winbind [ ? ] wpa-ifupdown [ - ] x11-common

Read the article

Cisco VPNClient from Mac won't connect using iPhone Tethering

- by Dan Short

I just set up iPhone tethering from my Snow Leopard Macbook Pro to my iPhone 3GS with the Datapro 4GB plan from AT&T. When attempting to connect to my corporate VPN from the MacBook Pro with Cisco VPNClient 4.9.01 (0100) I get the following log information: Cisco Systems VPN Client Version 4.9.01 (0100) Copyright (C) 1998-2006 Cisco Systems, Inc. All Rights Reserved. Client Type(s): Mac OS X Running on: Darwin 10.6.0 Darwin Kernel Version 10.6.0: Wed Nov 10 18:13:17 PST 2010; root:xnu-1504.9.26~3/RELEASE_I386 i386 Config file directory: /etc/opt/cisco-vpnclient 1 13:02:50.791 02/22/2011 Sev=Info/4 CM/0x43100002 Begin connection process 2 13:02:50.791 02/22/2011 Sev=Warning/2 CVPND/0x83400011 Error -28 sending packet. Dst Addr: 0x0AD337FF, Src Addr: 0x0AD33702 (DRVIFACE:1158). 3 13:02:50.791 02/22/2011 Sev=Warning/2 CVPND/0x83400011 Error -28 sending packet. Dst Addr: 0x0A2581FF, Src Addr: 0x0A258102 (DRVIFACE:1158). 4 13:02:50.792 02/22/2011 Sev=Info/4 CM/0x43100004 Establish secure connection using Ethernet 5 13:02:50.792 02/22/2011 Sev=Info/4 CM/0x43100024 Attempt connection with server "209.235.253.115" 6 13:02:50.792 02/22/2011 Sev=Info/4 CVPND/0x43400019 Privilege Separation: binding to port: (500). 7 13:02:50.793 02/22/2011 Sev=Info/4 CVPND/0x43400019 Privilege Separation: binding to port: (4500). 8 13:02:50.793 02/22/2011 Sev=Info/6 IKE/0x4300003B Attempting to establish a connection with 209.235.253.115. 9 13:02:51.293 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 10 13:02:51.894 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 11 13:02:52.495 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 12 13:02:53.096 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 13 13:02:53.698 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 14 13:02:54.299 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 15 13:02:54.299 02/22/2011 Sev=Info/4 IKE/0x43000075 Unable to acquire local IP address after 5 attempts (over 5 seconds), probably due to network socket failure. 16 13:02:54.299 02/22/2011 Sev=Warning/2 IKE/0xC300009A Failed to set up connection data 17 13:02:54.299 02/22/2011 Sev=Info/4 CM/0x4310001C Unable to contact server "209.235.253.115" 18 13:02:54.299 02/22/2011 Sev=Info/5 CM/0x43100025 Initializing CVPNDrv 19 13:02:54.300 02/22/2011 Sev=Info/4 CVPND/0x4340001F Privilege Separation: restoring MTU on primary interface. 20 13:02:54.300 02/22/2011 Sev=Info/4 IKE/0x43000001 IKE received signal to terminate VPN connection 21 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x43700008 IPSec driver successfully started 22 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x43700014 Deleted all keys 23 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x4370000D Key(s) deleted by Interface (192.168.0.171) 24 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x43700014 Deleted all keys 25 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x43700014 Deleted all keys 26 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x43700014 Deleted all keys 27 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x4370000A IPSec driver successfully stopped The key line is 15: 15 13:02:54.299 02/22/2011 Sev=Info/4 IKE/0x43000075 Unable to acquire local IP address after 5 attempts (over 5 seconds), probably due to network socket failure. I can't find anything online about this. I found a single entry for the error message in Google, and it was a swedish (or some other nordic language site) that didn't have an answer to the question. I've tried connecting through both USB and Bluetooth tethering to the iPhone, and they both return the exact same results. I don't have direct control over the firewall, but if changes are necessary to make it work, I may be able to get the powers-that-be to make adjustments. A solution that doesn't require reconfiguring the firewall would be far better of course... Does anyone know what I can do to make this behave? Thanks, Dan

Read the article

Facing issues in setting up VPN connection(IKEv1) using iphone (Defult Cisco VPN client) and Strongswan 4.5.0 server

- by Kushagra Bhatnagar

I am facing issues in setting up VPN connection(IKEv1) using iPhone (Defult Cisco VPN client) and Strongswan 4.5.0 server. The Strongswan server is running on Ubuntu Linux, which is connected to some wifi hotspot. This is the guide which was used. I generated CA, server and client certificate, with the only difference mentioned below. “While generating server certificate, as per link CN=vpn.strongswan.org instead of this I changed CN name to CN=192.168.43.212.” Once certificates are generated, following (clientCert.p12 and caCert.pem) are sent to mobile via mail and installed on iphone. After installation I notice that certificates are considered as trusted also. Below are the ip addresses assigned to various interfaces Linux server wlan0 interface ip where server is running: 192.168.43.212 Iphone eth0 interface ip address: 192.168.43.72. iphone is also attached with the same wifi hotspot. Below is the snapshot of client configurations. Description Strong swan Server 192.168.43.212 Account ipsecvpn Password ***** Use certificate ON Certificate client The above username and password are in sync with the ipsec.secrets file. I am using the following ipsec.conf configuration: # basic configuration config setup plutodebug=all # crlcheckinterval=600 # strictcrlpolicy=yes # cachecrls=yes nat_traversal=yes # charonstart=yes plutostart=yes # Add connections here. # Sample VPN connections conn ios1 keyexchange=ikev1 authby=xauthrsasig xauth=server left=%defaultroute leftsubnet=0.0.0.0/0 leftfirewall=yes leftcert=serverCert.pem right=192.168.43.72 rightsubnet=10.0.0.0/24 rightsourceip=10.0.0.2 rightcert=clientCert.pem pfs=no auto=add With the above configurations when I enable VPN on iphone, it says Could not able to verify server certificate. I ran Wireshark on a Linux server and observe that initially some ISAKMP message exchanges happens between client and server, which are successful but before authorization, client is sending some informational message and soon after this client is showing error as popup Could not able to verify server certificate. Capture logs on Strongswan server and in server logs below errors are observed: From auth.log Apr 25 20:16:08 Linux pluto[4025]: | ISAKMP version: ISAKMP Version 1.0 Apr 25 20:16:08 Linux pluto[4025]: | exchange type: ISAKMP_XCHG_INFO Apr 25 20:16:08 Linux pluto[4025]: | flags: ISAKMP_FLAG_ENCRYPTION Apr 25 20:16:08 Linux pluto[4025]: | message ID: 9d 1a ea 4d Apr 25 20:16:08 Linux pluto[4025]: | length: 76 Apr 25 20:16:08 Linux pluto[4025]: | ICOOKIE: f6 b7 06 b2 b1 84 5b 93 Apr 25 20:16:08 Linux pluto[4025]: | RCOOKIE: 86 92 a0 c2 a6 2f ac be Apr 25 20:16:08 Linux pluto[4025]: | peer: c0 a8 2b 48 Apr 25 20:16:08 Linux pluto[4025]: | state hash entry 8 Apr 25 20:16:08 Linux pluto[4025]: | state object not found Apr 25 20:16:08 Linux pluto[4025]: **packet from 192.168.43.72:500: Informational Exchange is for an unknown (expired?) SA** Apr 25 20:16:08 Linux pluto[4025]: | next event EVENT_RETRANSMIT in 8 seconds for #8 Apr 25 20:16:16 Linux pluto[4025]: | Apr 25 20:16:16 Linux pluto[4025]: | *time to handle event Apr 25 20:16:16 Linux pluto[4025]: | event after this is EVENT_RETRANSMIT in 2 seconds Apr 25 20:16:16 Linux pluto[4025]: | handling event EVENT_RETRANSMIT for 192.168.43.72 "ios1" #8 Apr 25 20:16:16 Linux pluto[4025]: | sending 76 bytes for EVENT_RETRANSMIT through wlan0 to 192.168.43.72:500: Apr 25 20:16:16 Linux pluto[4025]: | a6 a5 86 41 4b fb ff 99 c9 18 34 61 01 7b f1 d9 Apr 25 20:16:16 Linux pluto[4025]: | 08 10 06 01 e9 1c ea 60 00 00 00 4c ba 7d c8 08 Apr 25 20:16:16 Linux pluto[4025]: | 13 47 95 18 19 31 45 30 2e 22 f9 4d 85 2c 27 bc Apr 25 20:16:16 Linux pluto[4025]: | 9e 9b e1 ae 1e 35 51 6f ab 80 f5 73 3c 15 8d 20 Apr 25 20:16:16 Linux pluto[4025]: | 4b 46 47 86 50 24 3f 13 15 7d d5 17 Apr 25 20:16:16 Linux pluto[4025]: | inserting event EVENT_RETRANSMIT, timeout in 40 seconds for #8 Apr 25 20:16:16 Linux pluto[4025]: | next event EVENT_RETRANSMIT in 2 seconds for #10 Apr 25 20:16:16 Linux pluto[4025]: | rejected packet: Apr 25 20:16:16 Linux pluto[4025]: | Apr 25 20:16:16 Linux pluto[4025]: | control: Apr 25 20:16:16 Linux pluto[4025]: | 30 00 00 00 00 00 00 00 00 00 00 00 0b 00 00 00 Apr 25 20:16:16 Linux pluto[4025]: | 6f 00 00 00 02 03 03 00 00 00 00 00 00 00 00 00 Apr 25 20:16:16 Linux pluto[4025]: | 02 00 00 00 c0 a8 2b 48 00 00 00 00 00 00 00 00 Apr 25 20:16:16 Linux pluto[4025]: | name: Apr 25 20:16:16 Linux pluto[4025]: | 02 00 01 f4 c0 a8 2b 48 00 00 00 00 00 00 00 00 Apr 25 20:16:16 Linux pluto[4025]: **ERROR: asynchronous network error report on wlan0 for message to 192.168.43.72 port 500, complainant 192.168.43.72: Connection refused [errno 111, origin ICMP type 3 code 3 (not authenticated)]** Anybody please provide some update about this error and how to solve this issue.

Read the article

Neighbour table overflow on Linux hosts related to bridging and ipv6

- by tim

Note: I already have a workaround for this problem (as described below) so this is only a "want-to-know" question. I have a productive setup with around 50 hosts including blades running xen 4 and equallogics providing iscsi. All xen dom0s are almost plain Debian 5. The setup includes several bridges on every dom0 to support xen bridged networking. In total there are between 5 and 12 bridges on each dom0 servicing one vlan each. None of the hosts has routing enabled. At one point in time we moved one of the machines to a new hardware including a raid controller and so we installed an upstream 3.0.22/x86_64 kernel with xen patches. All other machines run debian xen-dom0-kernel. Since then we noticed on all hosts in the setup the following errors every ~2 minutes: [55888.881994] __ratelimit: 908 callbacks suppressed [55888.882221] Neighbour table overflow. [55888.882476] Neighbour table overflow. [55888.882732] Neighbour table overflow. [55888.883050] Neighbour table overflow. [55888.883307] Neighbour table overflow. [55888.883562] Neighbour table overflow. [55888.883859] Neighbour table overflow. [55888.884118] Neighbour table overflow. [55888.884373] Neighbour table overflow. [55888.884666] Neighbour table overflow. The arp table (arp -n) never showed more than around 20 entries on every machine. We tried the obvious tweaks and raised the /proc/sys/net/ipv4/neigh/default/gc_thresh* values. FInally to 16384 entries but no effect. Not even the interval of ~2 minutes changed which lead me to the conclusion that this is totally unrelated. tcpdump showed no uncommon ipv4 traffic on any interface. The only interesting finding from tcpdump were ipv6 packets bursting in like: 14:33:13.137668 IP6 fe80::216:3eff:fe1d:9d01 > ff02::1:ff1d:9d01: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff1d:9d01, length 24 14:33:13.138061 IP6 fe80::216:3eff:fe1d:a8c1 > ff02::1:ff1d:a8c1: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff1d:a8c1, length 24 14:33:13.138619 IP6 fe80::216:3eff:fe1d:bf81 > ff02::1:ff1d:bf81: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff1d:bf81, length 24 14:33:13.138974 IP6 fe80::216:3eff:fe1d:eb41 > ff02::1:ff1d:eb41: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff1d:eb41, length 24 which placed the idea in my mind that the problem maybe related to ipv6, since we have no ipv6 services in this setup. The only other hint was the coincidence of the host upgrade with the beginning of the problems. I powered down the host in question and the errors were gone. Then I subsequently took down the bridges on the host and when i took down (ifconfig down) one particularly bridge: br-vlan2159 Link encap:Ethernet HWaddr 00:26:b9:fb:16:2c inet6 addr: fe80::226:b9ff:fefb:162c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:120 errors:0 dropped:0 overruns:0 frame:0 TX packets:9 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5286 (5.1 KiB) TX bytes:726 (726.0 B) eth0.2159 Link encap:Ethernet HWaddr 00:26:b9:fb:16:2c inet6 addr: fe80::226:b9ff:fefb:162c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1801 errors:0 dropped:0 overruns:0 frame:0 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:126228 (123.2 KiB) TX bytes:1464 (1.4 KiB) bridge name bridge id STP enabled interfaces ... br-vlan2158 8000.0026b9fb162c no eth0.2158 br-vlan2159 8000.0026b9fb162c no eth0.2159 The errors went away again. As you can see the bridge holds no ipv4 address and it's only member is eth0.2159 so no traffic should cross it. Bridge and interface .2159 / .2157 / .2158 which are in all aspects identical apart from the vlan they are connected to had no effect when taken down. Now I disabled ipv6 on the entire host via sysctl net.ipv6.conf.all.disable_ipv6 and rebooted. After this even with bridge br-vlan2159 enabled no errors occur. Any ideas are welcome.

Read the article

ubuntu 10.04; kvm bridged networking not working with public ip addresses

- by senorsmile

I have a dedicated hosted server box with ubuntu 10.04 64 bit installed. I would like to run kvm with ubuntu 8.04 installed for some php 5.2 compatible apps(they don't work right with php 5.3, the default in ubuntu 10.04). I installed KVM as instructed at https://help.ubuntu.com/community/KVM/Installation . I installed the vm using virt-manager. I never could figure out how use virt-install or any of those automated installers. I just installed it using the disc. I set up bridged networking as per https://help.ubuntu.com/community/KVM/Networking . However, the bridged connection doesn't work. Here's my /etc/network/interfaces on the host, running ubuntu 10.04. (with specific public ip blanked) auto lo iface lo inet loopback auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address xx.xx.xx.xx netmask 255.255.255.248 gateway xx.xx.xx.xa bridge_ports eth0 bridge_stp on bridge_fd 0 bridge_maxwait 10 ` Here's my /etc/network/interfaces on the guest, running ubuntu 8.04. auto lo iface lo inet loopback auto eth0 iface eth0 inet static address xx.xx.xx.xy netmask 255.255.255.248 gateway xx.xx.xx.xa The two vm's can communicate to each other. But, the guest vm can't access anyone in the real world. Here's my /etc/libvirt/qemu/store_804.xml <domain type='kvm'> <name>store_804</name> <uuid>27acfb75-4f90-a34c-9a0b-70a6927ae84c</uuid> <memory>2097152</memory> <currentMemory>2097152</currentMemory> <vcpu>2</vcpu> <os> <type arch='x86_64' machine='pc-0.12'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/store_804.img'/> <target dev='hda' bus='ide'/> </disk> <disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hdc' bus='ide'/> <readonly/> </disk> <interface type='bridge'> <mac address='52:54:00:26:0b:c6'/> <source bridge='br0'/> <model type='virtio'/> </interface> <console type='pty'> <target port='0'/> </console> <console type='pty'> <target port='0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes'/> <sound model='es1370'/> <video> <model type='cirrus' vram='9216' heads='1'/> </video> </devices> </domain> Any idea where I've gone wrong?

Read the article

Outlook 2007 Does Not Accept Login Credentials, OWA Webmail Does. Troubleshooting Advice?

- by Chris

I am trying to connect Outlook 2007 to Exchange (Hosted Exchange from Rackspace). Soon, I will need to roll this out for our entire office. With the Exchange account added to Outlook, Outlook starts up and asks for the user's username and password. Unfortunately, it doesn't like the password I use for it. I can confirm this username (email address) and password combo works by using Outlook WebMail, and another user (in another network/office) confirmed the Exchange account does work within his Outlook client. In my network/office, I can confirm that an Outlook 2007 client (under Windows 7) can connect to the Hosted Exchange server from Rackspace. However, I have not been able to get Outlook 2007 (under Windows XP SP3) to connect to the very same Exchange server Outlook 2007 (under Windows 7) can connect to. Outlook continuously prompts me for the username and password and does not accept the correct combination. Now, regarding the Outlook client that cannot connect/login to Exchange: The user has full admin rights on the workstation We do not run a domain controller/LDAP The firewall on the workstation has been disabled Real time file scanning in Microsoft Security Essentials has been disabled There are no virus scanning applications that would interface with Outlook or an email server. The Exchange account is setup to run on a newly created Outlook profile The network firewall does not log any blocked attempts A packet capture at the router reveals communication between the workstation and the Exchange server or proxy (though, this is SSL encrypted, so I don't know what the computers are saying) I have applied a fix (Added DWORD value of 0 for DefConnectOpts under HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Outlook\RPC) that was recommended to make RPC function when the workstation does not have a default gateway set. Workstation is configured as DHCP. This fix did nothing, and it may be worth noting the RPC subkey was not present until I added it. RPC service is running on the workstation The program is not running under any compatibility mode. Side note: Outlook 2007 installs with compatibility mode for XP enabled by default in windows 7. Outlook 2007 will not even try to connect to exchange if this compatibility mode is checked. In windows xp, I tried checking compatibility mode for windows 2000, and was unable to connect to exchange as well. Here is the specific configuration I've used in a blank outlook profile: Microsoft Exchange Server: ##MASKED##-MBX-C18.mex07a.mlsrvr.com Username: (Full Email Address: [email protected]) Password: ##MASKED## Outlook Anywhere: Connect to Microsoft Exchange using HTTP Exchange Proxy Settings: Proxy Server: mex07a.emailsrvr.com Check "Connect using SSL only" Under "Only connect to proxy servers...", enter: msstd:mex07a.emailsrvr.com Check "On fast networks, connect using HTTP first, then connect using TCP/IP" Check "On slow networks, connect using HTTP first, then connect using TCP/IP" Proxy authentication settings: Basic Authentication Notes: mex07a.mlsrvr.com and mex07a.emailsrvr.com may look incorrect at first glance, but this is not a typo - these instructions were handed down from rackspace and are confirmed to be working, just not on this workstation. I have tried to use the RpcPing utility but must have been using it wrong. I got as far as "Bad Interface Descriptor". It would seem to me getting Outlook and Exchange to work together would be a breeze, especially since everything is done over port 80 with web services. Unfortunately, the user is stuck with WebMail access only, because Outlook won't accept the Exchange credentials. Do you have any ideas of other things I could try to debug this issue further? Any and all help is greatly appreciated. Thank you! -Chris

Read the article

I need to understand why my server turned off

- by Dema

Our organization was robbed and definitely it was inside job. I was set up. I work as a manager and as system administrator in this organization and everything goes against me. The only clue I have is that someone accidentally or intentionally turned of a server that is in the office indicating that some one was inside at the time that no one should be. This is the only evidence I have that can justify me. I looked the log files and they show that the Power button was pressed. Can you help me to find out that that was not a bug or systems overheat? I will post the log files and if you will ask more I will gladly provide the information. Messages: Dec 24 21:43:14 jamx shutdown[27883]: shutting down for system halt Dec 24 21:43:15 jamx init: Switching to runlevel: 0 Dec 24 21:43:15 jamx smartd[3047]: smartd received signal 15: Terminated Dec 24 21:43:15 jamx smartd[3047]: smartd is exiting (exit status 0) Dec 24 21:43:15 jamx avahi-daemon[3015]: Got SIGTERM, quitting. Dec 24 21:43:15 jamx avahi-daemon[3015]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::221:85ff:fe11:8221. Dec 24 21:43:15 jamx avahi-daemon[3015]: Leaving mDNS multicast group on interface eth0.IPv4 with address 82.207.41.239. Dec 24 21:43:15 jamx shutdown[27962]: shutting down for system halt Dec 24 21:43:15 jamx saslauthd[2983]: server_exit : master exited: 2983 Dec 24 21:43:29 jamx nmbd[2921]: [2010/12/24 21:43:29, 0] nmbd/nmbd.c:terminate(58) Dec 24 21:43:29 jamx nmbd[2921]: Got SIGTERM: going down... Dec 24 21:43:31 jamx clamd[2526]: Pid file removed. Dec 24 21:43:31 jamx clamd[2526]: --- Stopped at Fri Dec 24 21:43:31 2010 Dec 24 21:43:31 jamx clamd[2526]: Socket file removed. Dec 24 21:43:31 jamx mydns[2645]: jamx.org.ua up 9h44m48s (35088s) 117 questions (0/s) NOERROR=117 SERVFAIL=0 NXDOMAIN=0 NOTIMP=0 REFUSED=0 (100% TCP, 117 queries) Dec 24 21:43:31 jamx mydns[2645]: terminated Dec 24 21:43:34 jamx ntpd[2512]: ntpd exiting on signal 15 Dec 24 21:43:34 jamx hcid[2265]: Got disconnected from the system message bus Dec 24 21:43:35 jamx rpc.statd[2167]: Caught signal 15, un-registering and exiting. Dec 24 21:43:35 jamx portmap[28473]: connect from 127.0.0.1 to unset(status): request from unprivileged port Dec 24 21:43:35 jamx auditd[2021]: The audit daemon is exiting. Dec 24 21:43:35 jamx kernel: audit(1293219815.505:4044): audit_pid=0 old=2021 by auid=4294967295 Dec 24 21:43:35 jamx pcscd: pcscdaemon.c:572:signal_trap() Preparing for suicide Dec 24 21:43:36 jamx pcscd: hotplug_libusb.c:376:HPRescanUsbBus() Hotplug stopped Dec 24 21:43:36 jamx pcscd: readerfactory.c:1379:RFCleanupReaders() entering cleaning function Dec 24 21:43:36 jamx pcscd: pcscdaemon.c:532:at_exit() cleaning /var/run Dec 24 21:43:36 jamx kernel: Kernel logging (proc) stopped. Dec 24 21:43:36 jamx kernel: Kernel log daemon terminating. Dec 24 21:43:37 jamx exiting on signal 15 Acpid: [Fri Dec 24 21:43:14 2010] received event "button/power PWRF 00000080 00000001" [Fri Dec 24 21:43:14 2010] notifying client 2382[68:68] [Fri Dec 24 21:43:14 2010] executing action "/bin/ps awwux | /bin/grep gnome-power-manager | /bin/grep -qv grep || /sbin/shutdown -h now" [Fri Dec 24 21:43:14 2010] BEGIN HANDLER MESSAGES [Fri Dec 24 21:43:15 2010] END HANDLER MESSAGES [Fri Dec 24 21:43:15 2010] action exited with status 0 [Fri Dec 24 21:43:15 2010] completed event "button/power PWRF 00000080 00000001" [Fri Dec 24 21:43:15 2010] received event "button/power PWRF 00000080 00000002" [Fri Dec 24 21:43:15 2010] notifying client 2382[68:68] [Fri Dec 24 21:43:15 2010] executing action "/bin/ps awwux | /bin/grep gnome-power-manager | /bin/grep -qv grep || /sbin/shutdown -h now" [Fri Dec 24 21:43:15 2010] BEGIN HANDLER MESSAGES [Fri Dec 24 21:43:15 2010] END HANDLER MESSAGES [Fri Dec 24 21:43:15 2010] action exited with status 0 [Fri Dec 24 21:43:15 2010] completed event "button/power PWRF 00000080 00000002" [Fri Dec 24 21:43:34 2010] exiting

Read the article

vlans on openvz, centos 6

- by arheops

i have centos 6 with openvz installed on it, switch with vlan support. I need following setup: 1) eth0 on openvz have be tagged multiple vlans. 2) each virtualhost have to be in single vlan. yes,i already read wiki on openvz, but it is just not work. I have on main server interface eth0.108 and able ping address on that interface(using nootbook on untagged port vlan 108), but i not able ping address inside container. Main node: [root@box1 conf]# ifconfig eth0 Link encap:Ethernet HWaddr D0:67:E5:F4:11:60 inet6 addr: fe80::d267:e5ff:fef4:1160/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:506 errors:0 dropped:0 overruns:0 frame:0 TX packets:25 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:68939 (67.3 KiB) TX bytes:1780 (1.7 KiB) Interrupt:16 Memory:c0000000-c0012800 eth0.108 Link encap:Ethernet HWaddr D0:67:E5:F4:11:60 inet addr:10.11.108.3 Bcast:10.11.111.255 Mask:255.255.252.0 inet6 addr: fe80::d267:e5ff:fef4:1160/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:238 errors:0 dropped:0 overruns:0 frame:0 TX packets:19 errors:0 dropped:12 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:25890 (25.2 KiB) TX bytes:926 (926.0 b) eth1 Link encap:Ethernet HWaddr D0:67:E5:F4:11:61 inet addr:192.168.23.233 Bcast:192.168.23.255 Mask:255.255.255.0 inet6 addr: fe80::d267:e5ff:fef4:1161/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1967 errors:0 dropped:0 overruns:0 frame:0 TX packets:356 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:365298 (356.7 KiB) TX bytes:115007 (112.3 KiB) Interrupt:17 Memory:c2000000-c2012800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:7 errors:0 dropped:0 overruns:0 frame:0 TX packets:7 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:784 (784.0 b) TX bytes:784 (784.0 b) venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet6 addr: fe80::1/128 Scope:Link UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:3 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) veth108.0 Link encap:Ethernet HWaddr 00:18:51:DA:94:D5 inet6 addr: fe80::218:51ff:feda:94d5/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:639 errors:0 dropped:0 overruns:0 frame:0 TX packets:5 errors:0 dropped:1 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:17996 (17.5 KiB) TX bytes:308 (308.0 b) virtual node [root@pbx108 /]# ifconfig eth0.108 Link encap:Ethernet HWaddr 00:18:51:CA:B5:C5 inet addr:10.11.108.1 Bcast:10.11.111.255 Mask:255.255.252.0 inet6 addr: fe80::218:51ff:feca:b5c5/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5 errors:0 dropped:0 overruns:0 frame:0 TX packets:685 errors:0 dropped:2 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:308 (308.0 b) TX bytes:19284 (18.8 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:683 errors:0 dropped:0 overruns:0 frame:0 TX packets:683 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:76288 (74.5 KiB) TX bytes:76288 (74.5 KiB) /etc/vz/conf/108.conf # RAM PHYSPAGES="0:4000M" # Swap SWAPPAGES="0:512M" # Disk quota parameters (in form of softlimit:hardlimit) DISKSPACE="200G:200G" DISKINODES="20000000:22000000" QUOTATIME="0" # CPU fair scheduler parameter CPUUNITS="4000" VE_ROOT="/vz/root/$VEID" VE_PRIVATE="/vz/private/$VEID" OSTEMPLATE="centos-6-x86_64" ORIGIN_SAMPLE="vswap-256m" NETIF="ifname=eth0.108,mac=00:18:51:CA:B5:C5,host_ifname=veth108.0,host_mac=00:18:51:DA:94:D5" NAMESERVER="8.8.8.8" HOSTNAME="pbx108.localhost" IP_ADDRESS=""

Read the article

pptpd not working externally on Ubuntu Server 11.10

- by Brendan

I am trying to set up a pptpd vpn on our newly installed Ubuntu 11.10 64 bit server, but am not having success having a client connect via an iPhone to the VPN. Note that no clients have been able to connect to this VPN from outside of the network. The system is up to date with patches. Here is the output of /var/log/syslog. Please note that 222.153.x.y is my remote IP address. Mar 30 22:07:47 server pptpd[9546]: CTRL: Client 222.153.x.y control connection started Mar 30 22:07:47 server pptpd[9546]: CTRL: Starting call (launching pppd, opening GRE) Mar 30 22:07:47 server pppd[9555]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Mar 30 22:07:47 server pppd[9555]: pppd 2.4.5 started by root, uid 0 Mar 30 22:07:47 server pppd[9555]: Using interface ppp0 Mar 30 22:07:47 server pppd[9555]: Connect: ppp0 <--> /dev/pts/3 Mar 30 22:07:47 server pptpd[9546]: GRE: Bad checksum from pppd. Mar 30 22:08:17 server pppd[9555]: LCP: timeout sending Config-Requests Mar 30 22:08:17 server pppd[9555]: Connection terminated. Mar 30 22:08:17 server pppd[9555]: Modem hangup Mar 30 22:08:17 server pppd[9555]: Exit. Mar 30 22:08:17 server pptpd[9546]: GRE: read(fd=6,buffer=6075a0,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Mar 30 22:08:17 server pptpd[9546]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Mar 30 22:08:17 server pptpd[9546]: CTRL: Reaping child PPP[9555] Mar 30 22:08:17 server pptpd[9546]: CTRL: Client 222.153.x.y control connection finished As you can see, the problem seems to be the connection timing out after 30 seconds ("Mar 30 22:08:17 server pppd[9555]: LCP: timeout sending Config-Requests". Over Wifi however (inside the local network) there are no issues: Mar 30 22:12:33 unreal-server pptpd[12406]: CTRL: Client 192.168.0.100 control connection started Mar 30 22:12:33 unreal-server pptpd[12406]: CTRL: Starting call (launching pppd, opening GRE) Mar 30 22:12:33 unreal-server pppd[12407]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Mar 30 22:12:33 unreal-server pppd[12407]: pppd 2.4.5 started by root, uid 0 Mar 30 22:12:33 unreal-server pppd[12407]: Using interface ppp0 Mar 30 22:12:33 unreal-server pppd[12407]: Connect: ppp0 <--> /dev/pts/3 Mar 30 22:12:33 unreal-server pptpd[12406]: GRE: Bad checksum from pppd. Mar 30 22:12:36 unreal-server pppd[12407]: peer from calling number 192.168.0.100 authorized Mar 30 22:12:36 unreal-server pppd[12407]: MPPE 128-bit stateless compression enabled Mar 30 22:12:36 unreal-server pppd[12407]: Cannot determine ethernet address for proxy ARP Mar 30 22:12:36 unreal-server pppd[12407]: local IP address 192.168.0.10 Mar 30 22:12:36 unreal-server pppd[12407]: remote IP address 192.168.1.1 I have set up an iptables config for the server; to check this isn't the problem I allowed all traffic temporarily, but this does NOT change the symptoms in the first example. Here is the output from /etc/iptables.rules.save *filter :FORWARD ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] COMMIT Even with these rules applied, the output from /var/log/syslog is LINE FOR LINE what I saw in the the first block of code. Please note that before running this Ubuntu server; an old SME Server box was running in place of it, that had a pptpd server on it just like we are using, and we experienced no issues.

Read the article

Cisco 678 Will Not Work using PPPoE - Possibly Because I Configured it Incorrectly..?

- by Brian Stinar

I am attempting to configure a Cisco 678 because I am totally sick on my Actiontec. However, I am running into some problems. It seems as though the Cisco is able to train the line, but I am unable to ping out. I am all right at programming, but still learning a lot when it comes to being a system administrator. I apologize in advance if I did something ridiculous, or am attempting to configure this device to do something it was not designed to do. It is almost like I am not correctly configuring the device to grab it's IP using PPPoA (like my Actiontec.) The output from "show running" (below) makes me think this too. Below are the commands I ran in order to configure this: # en # set nvram erase # write # reboot # en # set nat enable # set dhcp server enable # set PPP wan0-0 ipcp 0.0.0.0 # set ppp wan0-0 dns 0.0.0.0 # set PPP wan0-0 login xxxxx // My actual login # set PPP wan0-0 password yyyyy // My actual password # set PPP restart enabled # set int wan0-0 close # set int wan0-0 vpi 0 # set int wan0-0 vci 32 # set int wan0-0 open # write # reboot Here is the output from a few commands I thought could provide some useful information: cbos#ping 74.125.224.113 Sending 1 8 byte ping(s) to 74.125.224.113 every 2 second(s) Request timed out cbos#show version Cisco Broadband Operating System CBOS (tm) 678 Software (C678-I-M), Version v2.4.9 - Release Software Copyright (c) 1986-2001 by cisco Systems, Inc. Compiled Nov 17 2004 15:26:29 DMT FULL firmware version G96 NVRAM image at 0x1030f000 cbos#show errors - Current Error Messages - ## Ticks Module Level Message 0 000:00:00:00 PPP Info IPCP Open Event on wan0-0 1 000:00:00:14 ATM Info Wan0 Up 2 000:00:00:14 PPP Info PPP Up Event on wan0-0 3 000:00:01:54 PPP Info PPP Down Event on wan0-0 Total Number of Error Messages: 4 cbos#show interface wan0 wan0 ADSL Physical Port Line Trained Actual Configuration: Overhead Framing: 3 Trellis Coding: Enabled Standard Compliance: T1.413 Downstream Data Rate: 1184 Kbps Upstream Data Rate: 928 Kbps Interleave S Downstream: 4 Interleave D Downstream: 16 Interleave R Downstream: 16 Interleave S Upstream: 4 Interleave D Upstream: 8 Interleave R Upstream: 16 Modem Microcode: G96 DSP version: 0 Operating State: Showtime/Data Mode Configured: Echo Cancellation: Disabled Overhead Framing: 3 Coding Gain: Auto TX Power Attenuation: 0dB Trellis Coding: Enabled Bit Swapping: Disabled Standard Compliance: T1.413 Remote Standard Compliance: T1.413 Tx Start Bin: 0x6 Tx End Bin: 0x1f Data Interface: Utopia L1 Status: Local SNR Margin: 19.0dB Local Coding Gain: 7.5dB Local Transmit Power: 12.5dB Local Attenuation: 46.0dB Remote Attenuation: 31.0dB Local Counters: Interleaved RS Corrected Bytes: 0 Interleaved Symbols with CRC Errors: 2 No Cell Delineation Interleaved: 0 Out of Cell Delineation Interleaved: 0 Header Error Check Counter Interleaved: 0 Count of Severely Errored Frames: 0 Count of Loss of Signal Frames: 0 Remote Counters: Interleaved RS Corrected Bytes: 0 Interleaved Symbols with CRC Errors: 1 No Cell Delineation Interleaved: 0 Header Error Check Counter Interleaved: 0 Count of Severely Errored Frames: 0 Count of Loss of Signal Frames: 0 cbos#show int wan0-0 WAN0-0 ATM Logical Port PVC (VPI 0, VCI 32) is configured. ScalaRate set to Auto AAL 5 UBR Traffic IP Port Enabled cbos#show running Warning: traffic may pause while NVRAM is being accessed [[ CBOS = Section Start ]] NSOS MD5 Enable Password = XXXX NSOS MD5 Root Password = XXXX NSOS MD5 Commander Password = XXXX [[ PPP Device Driver = Section Start ]] PPP Port User Name = 00, "XXXX" PPP Port User Password = 00, XXXX PPP Port Option = 00, IPCP,IP Address,3,Auto,Negotiation Not Required,Negotiable ,IP,0.0.0.0 PPP Port Option = 00, IPCP,Primary DNS Server,129,Auto,Negotiation Not Required, Negotiable,IP,0.0.0.0 PPP Port Option = 00, IPCP,Secondary DNS Server,131,Auto,Negotiation Not Require d,Negotiable,IP,0.0.0.0 [[ ATM WAN Device Driver = Section Start ]] ATM WAN Virtual Connection Parms = 00, 0, 32, 0 [[ DHCP = Section Start ]] DHCP Server = enabled [[ IP Routing = Section Start ]] IP NAT = enabled [[ WEB = Section Start ]] WEB = enabled cbos# wtf...? Thank you all very much for taking the time to read this, and the help.

Read the article

WNDR3700 Router + Cisco SG200-08 + LACP + Dual Uplink

- by kobaltz

Background I have a storage server that has several virtual machine images stored on them. I would store them locally, but I have limited space on my desktop (using SSD storage). I would like to increase the bandwidth between the desktop and the storage server by using two NICs on each computer. My original configuration allowed about 55MBps between the desktop and storage server. This storage server also has several TBs of documents, pictures, movies, vms, and ISO/programs. The storage server has 8 1.5TB hard drives in a RAID 10 configuration with a hardware RAID controller. The benchmarks on the RAID 10 are about 300MBps. Configuration In short, I am trying to bridge my switch and router. The switch is a small 8 port Cisco smart switch that supports 802.3ad LACP. I have two computers plugged into the switch, each with 2 Intel Gigabit NICs. The first computer is a Windows 7 machine that has the Intel ANS software installed. I have LACP configured with the computer and now show 3 NICs (2 Physical + 1 TEAM Virtual @ 2Gbps). It looks like this computer is configured correctly. I trunked the two ports that this computer is plugged into with the switch's web interface. The second computer is a homebrew storage box running debian. I also have the bonding enabled on this machine and the switch configured with LACP. Without having the WNDR3700 router in the picture yet, I am able to communicate between the Windows 7 machine and the debian box since they both have static IP addresses. With LACP enabled on both machines I am getting about 106-108MBps speeds. Issue I plug in a network cable from the switch into the router and enable DHCP on the desktop. I saw no need to have a static address on the desktop. My transfer rates are still from 106MBps-108MBps. While this is still a boost, I am trying to figure out how to get about 140-180MBps. I am thinking that I need to increase the bandwidth from the router to the switch. My switch allows 4 groups for port trunking. I plugged in a second network cable from the router to the switch. My question is, what is the proper way to fix this issue. Should I port trunk the two ports that are going from the switch to the router? Keep in mind that the router is a WNDR3700 and is unsure whether or not it supports LACP. I do have OpenWRT installed on the router, but it still wasn't clear in any documentation that I found if it supported 802.3ad LACP standards. I am also wondering if there needs to be anything changed within the Cisco settings. [Edit] - Corrected some numbers, wasn't really paying attention. It looks like the speeds though at least two NICs are bonded with LACP is still reaching the max bandwidth of one port. Is there a way to configure the switch so that I can increase this bandwidth? Also, on the storage server, I had a couple of extra NICs laying around and threw them on there as well. Another EDIT and More Findings I happened to look at the traffic of each individual NIC and think that I see the problem. I tested with a simple transfer for a 4GB file. I noticed that only one of the NICs was taking the load of the traffic. I then copied the file back to the Storage Server and noticed that the other NIC was sending out the traffic. I have 802.3ad LACP enabled on the two NICs and I see that it gets enabled dynamically on the switch's interface. Should I be using Static Link Aggregation?

Read the article

AutoMapper MappingFunction from Source Type of NameValueCollection

- by REA_ANDREW

I have had a situation arise today where I need to construct a complex type from a source of a NameValueCollection. A little while back I submitted a patch for the Agatha Project to include REST (JSON and XML) support for the service contract. I realized today that as useful as it is, it did not actually support true REST conformance, as REST should support GET so that you can use JSONP from JavaScript directly meaning you can query cross domain services. My original implementation for POX and JSON used the POST method and this immediately rules out JSONP as from reading, JSONP only works with GET Requests. This then raised another issue. The current operation contract of Agatha and one of its main benefits is that you can supply an array of Request objects in a single request, limiting the about of server requests you need to make. Now, at the present time I am thinking that this will not be the case for the REST imlementation but will yield the benefits of the fact that : The same Request objects can be used for SOAP and RST (POX, JSON) The construct of the JavaScript functions will be simpler and more readable It will enable the use of JSONP for cross domain REST Services The current contract for the Agatha WcfRequestProcessor is at time of writing the following: [ServiceContract] public interface IWcfRequestProcessor { [OperationContract(Name = "ProcessRequests")] [ServiceKnownType("GetKnownTypes", typeof(KnownTypeProvider))] [TransactionFlow(TransactionFlowOption.Allowed)] Response[] Process(params Request[] requests); [OperationContract(Name = "ProcessOneWayRequests", IsOneWay = true)] [ServiceKnownType("GetKnownTypes", typeof(KnownTypeProvider))] void ProcessOneWayRequests(params OneWayRequest[] requests); } My current proposed solution, and at the very early stages of my concept is as follows: [ServiceContract] public interface IWcfRestJsonRequestProcessor { [OperationContract(Name="process")] [ServiceKnownType("GetKnownTypes", typeof(KnownTypeProvider))] [TransactionFlow(TransactionFlowOption.Allowed)] [WebGet(UriTemplate = "process/{name}/{*parameters}", BodyStyle = WebMessageBodyStyle.WrappedResponse, ResponseFormat = WebMessageFormat.Json)] Response[] Process(string name, NameValueCollection parameters); [OperationContract(Name="processoneway",IsOneWay = true)] [ServiceKnownType("GetKnownTypes", typeof(KnownTypeProvider))] [WebGet(UriTemplate = "process-one-way/{name}/{*parameters}", BodyStyle = WebMessageBodyStyle.WrappedResponse, ResponseFormat = WebMessageFormat.Json)] void ProcessOneWayRequests(string name, NameValueCollection parameters); } Now this part I have not yet implemented, it is the preliminart step which I have developed which will allow me to take the name of the Request Type and the NameValueCollection and construct the complex type which is that of the Request which I can then supply to a nested instance of the original IWcfRequestProcessor and work as it should normally. To give an example of some of the urls which you I envisage with this method are: http://www.url.com/service.svc/json/process/getweather/?location=london http://www.url.com/service.svc/json/process/getproductsbycategory/?categoryid=1 http://www.url.om/service.svc/json/process/sayhello/?name=andy Another reason why my direction has gone to a single request for the REST implementation is because of restrictions which are imposed by browsers on the length of the url. From what I have read this is on average 2000 characters. I think that this is a very acceptable usage limit in the context of using 1 request, but I do not think this is acceptable for accommodating multiple requests chained together. I would love to be corrected on that one, I really would but unfortunately from what I have read I have come to the conclusion that this is not the case. The mapping function So, as I say this is just the first pass I have made at this, and I am not overly happy with the try catch for detecting types without default constructors. I know there is a better way but for the minute, it escapes me. I would also like to know the correct way for adding mapping functions and not using the anonymous way that I have used. To achieve this I have used recursion which I am sure is what other mapping function use. As you do have to go as deep as the complex type is. public static object RecurseType(NameValueCollection collection, Type type, string prefix) { try { var returnObject = Activator.CreateInstance(type); foreach (var property in type.GetProperties()) { foreach (var key in collection.AllKeys) { if (String.IsNullOrEmpty(prefix) || key.Length > prefix.Length) { var propertyNameToMatch = String.IsNullOrEmpty(prefix) ? key : key.Substring(property.Name.IndexOf(prefix) + prefix.Length + 1); if (property.Name == propertyNameToMatch) { property.SetValue(returnObject, Convert.ChangeType(collection.Get(key), property.PropertyType), null); } else if(property.GetValue(returnObject,null) == null) { property.SetValue(returnObject, RecurseType(collection, property.PropertyType, String.Concat(prefix, property.PropertyType.Name)), null); } } } } return returnObject; } catch (MissingMethodException) { //Quite a blunt way of dealing with Types without default constructor return null; } } Another thing is performance, I have not measured this in anyway, it is as I say the first pass, so I hope this can be the start of a more perfected implementation. I tested this out with a complex type of three levels, there is no intended logical meaning to the properties, they are simply for the purposes of example. You could call this a spiking session, as from here on in, now I know what I am building I would take a more TDD approach. OK, purists, why did I not do this from the start, well I didn’t, this was a brain dump and now I know what I am building I can. The console test and how I used with AutoMapper is as follows: static void Main(string[] args) { var collection = new NameValueCollection(); collection.Add("Name", "Andrew Rea"); collection.Add("Number", "1"); collection.Add("AddressLine1", "123 Street"); collection.Add("AddressNumber", "2"); collection.Add("AddressPostCodeCountry", "United Kingdom"); collection.Add("AddressPostCodeNumber", "3"); AutoMapper.Mapper.CreateMap<NameValueCollection, Person>() .ConvertUsing(x => { return(Person) RecurseType(x, typeof(Person), null); }); var person = AutoMapper.Mapper.Map<NameValueCollection, Person>(collection); Console.WriteLine(person.Name); Console.WriteLine(person.Number); Console.WriteLine(person.Address.Line1); Console.WriteLine(person.Address.Number); Console.WriteLine(person.Address.PostCode.Country); Console.WriteLine(person.Address.PostCode.Number); Console.ReadLine(); } Notice the convention that I am using and that this method requires you do use. Each property is prefixed with the constructed name of its parents combined. This is the convention used by AutoMapper and it makes sense. I can also think of other uses for this including using with ASP.NET MVC ModelBinders for creating a complex type from the QueryString which is itself is a NameValueCollection. Hope this is of some help to people and I would welcome any code reviews you could give me. References: Agatha : http://code.google.com/p/agatha-rrsl/ AutoMapper : http://automapper.codeplex.com/ Cheers for now, Andrew P.S. I will have the proposed solution for a more complete REST implementation for AGATHA very soon.

Read the article

Creating an ASP.NET report using Visual Studio 2010 - Part 1

- by rajbk

This tutorial walks you through creating an report based on the Northwind sample database. You will add a client report definition file (RDLC), create a dataset for the RDLC, define queries using LINQ to Entities, design the report and add a ReportViewer web control to render the report in a ASP.NET web page. The report will have a chart control. Different results will be generated by changing filter criteria. At the end of the walkthrough, you should have a UI like the following. From the UI below, a user is able to view the product list and can see a chart with the sum of Unit price for a given category. They can filter by Category and Supplier. The drop downs will auto post back when the selection is changed. This demo uses Visual Studio 2010 RTM. This post is split into three parts. The last part has the sample code attached. Creating an ASP.NET report using Visual Studio 2010 - Part 2 Creating an ASP.NET report using Visual Studio 2010 - Part 3 Lets start by creating a new ASP.NET empty web application called “NorthwindReports” Creating the Data Access Layer (DAL) Add a web form called index.aspx to the root directory. You do this by right clicking on the NorthwindReports web project and selecting “Add item..” . Create a folder called “DAL”. We will store all our data access methods and any data transfer objects in here. Right click on the DAL folder and add a ADO.NET Entity data model called Northwind. Select “Generate from database” and click Next. Create a connection to your database containing the Northwind sample database and click Next. From the table list, select Categories, Products and Suppliers and click next. Our Entity data model gets created and looks like this: Adding data transfer objects Right click on the DAL folder and add a ProductViewModel. Add the following code. This class contains properties we need to render our report. public class ProductViewModel { public int? ProductID { get; set; } public string ProductName { get; set; } public System.Nullable<decimal> UnitPrice { get; set; } public string CategoryName { get; set; } public int? CategoryID { get; set; } public int? SupplierID { get; set; } public bool Discontinued { get; set; } } Add a SupplierViewModel class. This will be used to render the supplier DropDownlist. public class SupplierViewModel { public string CompanyName { get; set; } public int SupplierID { get; set; } } Add a CategoryViewModel class. public class CategoryViewModel { public string CategoryName { get; set; } public int CategoryID { get; set; } } Create an IProductRepository interface. This will contain the signatures of all the methods we need when accessing the entity model. This step is not needed but follows the repository pattern. interface IProductRepository { IQueryable<Product> GetProducts(); IQueryable<ProductViewModel> GetProductsProjected(int? supplierID, int? categoryID); IQueryable<SupplierViewModel> GetSuppliers(); IQueryable<CategoryViewModel> GetCategories(); } Create a ProductRepository class that implements the IProductReposity above. The methods available in this class are as follows: GetProducts – returns an IQueryable of all products. GetProductsProjected – returns an IQueryable of ProductViewModel. The method filters all the products based on SupplierId and CategoryId if any. It then projects the result into the ProductViewModel. GetSuppliers() – returns an IQueryable of all suppliers projected into a SupplierViewModel GetCategories() – returns an IQueryable of all categories projected into a CategoryViewModel public class ProductRepository : IProductRepository { /// <summary> /// IQueryable of all Products /// </summary> /// <returns></returns> public IQueryable<Product> GetProducts() { var dataContext = new NorthwindEntities(); var products = from p in dataContext.Products select p; return products; } /// <summary> /// IQueryable of Projects projected /// into the ProductViewModel class /// </summary> /// <returns></returns> public IQueryable<ProductViewModel> GetProductsProjected(int? supplierID, int? categoryID) { var projectedProducts = from p in GetProducts() select new ProductViewModel { ProductID = p.ProductID, ProductName = p.ProductName, UnitPrice = p.UnitPrice, CategoryName = p.Category.CategoryName, CategoryID = p.CategoryID, SupplierID = p.SupplierID, Discontinued = p.Discontinued }; // Filter on SupplierID if (supplierID.HasValue) { projectedProducts = projectedProducts.Where(a => a.SupplierID == supplierID); } // Filter on CategoryID if (categoryID.HasValue) { projectedProducts = projectedProducts.Where(a => a.CategoryID == categoryID); } return projectedProducts; } public IQueryable<SupplierViewModel> GetSuppliers() { var dataContext = new NorthwindEntities(); var suppliers = from s in dataContext.Suppliers select new SupplierViewModel { SupplierID = s.SupplierID, CompanyName = s.CompanyName }; return suppliers; } public IQueryable<CategoryViewModel> GetCategories() { var dataContext = new NorthwindEntities(); var categories = from c in dataContext.Categories select new CategoryViewModel { CategoryID = c.CategoryID, CategoryName = c.CategoryName }; return categories; } } Your solution explorer should look like the following. Build your project and make sure you don’t get any errors. In the next part, we will see how to create the client report definition file using the Report Wizard. Creating an ASP.NET report using Visual Studio 2010 - Part 2

Read the article

Introducing Oracle VM Server for SPARC

- by Honglin Su

As you are watching Oracle's Virtualization Strategy Webcast and exploring the great virtualization offerings of Oracle VM product line, I'd like to introduce Oracle VM Server for SPARC -- highly efficient, enterprise-class virtualization solution for Sun SPARC Enterprise Systems with Chip Multithreading (CMT) technology. Oracle VM Server for SPARC, previously called Sun Logical Domains, leverages the built-in SPARC hypervisor to subdivide supported platforms' resources (CPUs, memory, network, and storage) by creating partitions called logical (or virtual) domains. Each logical domain can run an independent operating system. Oracle VM Server for SPARC provides the flexibility to deploy multiple Oracle Solaris operating systems simultaneously on a single platform. Oracle VM Server also allows you to create up to 128 virtual servers on one system to take advantage of the massive thread scale offered by the CMT architecture. Oracle VM Server for SPARC integrates both the industry-leading CMT capability of the UltraSPARC T1, T2 and T2 Plus processors and the Oracle Solaris operating system. This combination helps to increase flexibility, isolate workload processing, and improve the potential for maximum server utilization. Oracle VM Server for SPARC delivers the following: Leading Price/Performance - The low-overhead architecture provides scalable performance under increasing workloads without additional license cost. This enables you to meet the most aggressive price/performance requirement Advanced RAS - Each logical domain is an entirely independent virtual machine with its own OS. It supports virtual disk mutipathing and failover as well as faster network failover with link-based IP multipathing (IPMP) support. Moreover, it's fully integrated with Solaris FMA (Fault Management Architecture), which enables predictive self healing. CPU Dynamic Resource Management (DRM) - Enable your resource management policy and domain workload to trigger the automatic addition and removal of CPUs. This ability helps you to better align with your IT and business priorities. Enhanced Domain Migrations - Perform domain migrations interactively and non-interactively to bring more flexibility to the management of your virtualized environment. Improve active domain migration performance by compressing memory transfers and taking advantage of cryptographic acceleration hardware. These methods provide faster migration for load balancing, power saving, and planned maintenance. Dynamic Crypto Control - Dynamically add and remove cryptographic units (aka MAU) to and from active domains. Also, migrate active domains that have cryptographic units. Physical-to-virtual (P2V) Conversion - Quickly convert an existing SPARC server running the Oracle Solaris 8, 9 or 10 OS into a virtualized Oracle Solaris 10 image. Use this image to facilitate OS migration into the virtualized environment. Virtual I/O Dynamic Reconfiguration (DR) - Add and remove virtual I/O services and devices without needing to reboot the system. CPU Power Management - Implement power saving by disabling each core on a Sun UltraSPARC T2 or T2 Plus processor that has all of its CPU threads idle. Advanced Network Configuration - Configure the following network features to obtain more flexible network configurations, higher performance, and scalability: Jumbo frames, VLANs, virtual switches for link aggregations, and network interface unit (NIU) hybrid I/O. Official Certification Based On Real-World Testing - Use Oracle VM Server for SPARC with the most sophisticated enterprise workloads under real-world conditions, including Oracle Real Application Clusters (RAC). Affordable, Full-Stack Enterprise Class Support - Obtain worldwide support from Oracle for the entire virtualization environment and workloads together. The support covers hardware, firmware, OS, virtualization, and the software stack. SPARC Server Virtualization Oracle offers a full portfolio of virtualization solutions to address your needs. SPARC is the leading platform to have the hard partitioning capability that provides the physical isolation needed to run independent operating systems. Many customers have already used Oracle Solaris Containers for application isolation. Oracle VM Server for SPARC provides another important feature with OS isolation. This gives you the flexibility to deploy multiple operating systems simultaneously on a single Sun SPARC T-Series server with finer granularity for computing resources. For SPARC CMT processors, the natural level of granularity is an execution thread, not a time-sliced microsecond of execution resources. Each CPU thread can be treated as an independent virtual processor. The scheduler is naturally built into the CPU for lower overhead and higher performance. Your organizations can couple Oracle Solaris Containers and Oracle VM Server for SPARC with the breakthrough space and energy savings afforded by Sun SPARC Enterprise systems with CMT technology to deliver a more agile, responsive, and low-cost environment. Management with Oracle Enterprise Manager Ops Center The Oracle Enterprise Manager Ops Center Virtualization Management Pack provides full lifecycle management of virtual guests, including Oracle VM Server for SPARC and Oracle Solaris Containers. It helps you streamline operations and reduce downtime. Together, the Virtualization Management Pack and the Ops Center Provisioning and Patch Automation Pack provide an end-to-end management solution for physical and virtual systems through a single web-based console. This solution automates the lifecycle management of physical and virtual systems and is the most effective systems management solution for Oracle's Sun infrastructure. Ease of Deployment with Configuration Assistant The Oracle VM Server for SPARC Configuration Assistant can help you easily create logical domains. After gathering the configuration data, the Configuration Assistant determines the best way to create a deployment to suit your requirements. The Configuration Assistant is available as both a graphical user interface (GUI) and terminal-based tool. Oracle Solaris Cluster HA Support The Oracle Solaris Cluster HA for Oracle VM Server for SPARC data service provides a mechanism for orderly startup and shutdown, fault monitoring and automatic failover of the Oracle VM Server guest domain service. In addition, applications that run on a logical domain, as well as its resources and dependencies can be controlled and managed independently. These are managed as if they were running in a classical Solaris Cluster hardware node. Supported Systems Oracle VM Server for SPARC is supported on all Sun SPARC Enterprise Systems with CMT technology. UltraSPARC T2 Plus Systems · Sun SPARC Enterprise T5140 Server · Sun SPARC Enterprise T5240 Server · Sun SPARC Enterprise T5440 Server · Sun Netra T5440 Server · Sun Blade T6340 Server Module · Sun Netra T6340 Server Module UltraSPARC T2 Systems · Sun SPARC Enterprise T5120 Server · Sun SPARC Enterprise T5220 Server · Sun Netra T5220 Server · Sun Blade T6320 Server Module · Sun Netra CP3260 ATCA Blade Server Note that UltraSPARC T1 systems are supported on earlier versions of the software.Sun SPARC Enterprise Systems with CMT technology come with the right to use (RTU) of Oracle VM Server, and the software is pre-installed. If you have the systems under warranty or with support, you can download the software and system firmware as well as their updates. Oracle Premier Support for Systems provides fully-integrated support for your server hardware, firmware, OS, and virtualization software. Visit oracle.com/support for information about Oracle's support offerings for Sun systems. For more information about Oracle's virtualization offerings, visit oracle.com/virtualization.

Read the article

MvcExtensions – Bootstrapping

- by kazimanzurrashid

When you create a new ASP.NET MVC application you will find that the global.asax contains the following lines: namespace MvcApplication1 { // Note: For instructions on enabling IIS6 or IIS7 classic mode, // visit http://go.microsoft.com/?LinkId=9394801 public class MvcApplication : System.Web.HttpApplication { public static void RegisterRoutes(RouteCollection routes) { routes.IgnoreRoute("{resource}.axd/{*pathInfo}"); routes.MapRoute( "Default", // Route name "{controller}/{action}/{id}", // URL with parameters new { controller = "Home", action = "Index", id = UrlParameter.Optional } // Parameter defaults ); } protected void Application_Start() { AreaRegistration.RegisterAllAreas(); RegisterRoutes(RouteTable.Routes); } } } As the application grows, there are quite a lot of plumbing code gets into the global.asax which quickly becomes a design smell. Lets take a quick look at the code of one of the open source project that I recently visited: public static void RegisterRoutes(RouteCollection routes) { routes.IgnoreRoute("{resource}.axd/{*pathInfo}"); routes.MapRoute("Default","{controller}/{action}/{id}", new { controller = "Home", action = "Index", id = "" }); } protected override void OnApplicationStarted() { Error += OnError; EndRequest += OnEndRequest; var settings = new SparkSettings() .AddNamespace("System") .AddNamespace("System.Collections.Generic") .AddNamespace("System.Web.Mvc") .AddNamespace("System.Web.Mvc.Html") .AddNamespace("MvcContrib.FluentHtml") .AddNamespace("********") .AddNamespace("********.Web") .SetPageBaseType("ApplicationViewPage") .SetAutomaticEncoding(true); #if DEBUG settings.SetDebug(true); #endif var viewFactory = new SparkViewFactory(settings); ViewEngines.Engines.Add(viewFactory); #if !DEBUG PrecompileViews(viewFactory); #endif RegisterAllControllersIn("********.Web"); log4net.Config.XmlConfigurator.Configure(); RegisterRoutes(RouteTable.Routes); Factory.Load(new Components.WebDependencies()); ModelBinders.Binders.DefaultBinder = new Binders.GenericBinderResolver(Factory.TryGet<IModelBinder>); ValidatorConfiguration.Initialize("********"); HtmlValidationExtensions.Initialize(ValidatorConfiguration.Rules); } private void OnEndRequest(object sender, System.EventArgs e) { if (((HttpApplication)sender).Context.Handler is MvcHandler) { CreateKernel().Get<ISessionSource>().Close(); } } private void OnError(object sender, System.EventArgs e) { CreateKernel().Get<ISessionSource>().Close(); } protected override IKernel CreateKernel() { return Factory.Kernel; } private static void PrecompileViews(SparkViewFactory viewFactory) { var batch = new SparkBatchDescriptor(); batch.For<HomeController>().For<ManageController>(); viewFactory.Precompile(batch); } As you can see there are quite a few of things going on in the above code, Registering the ViewEngine, Compiling the Views, Registering the Routes/Controllers/Model Binders, Settings up Logger, Validations and as you can imagine the more it becomes complex the more things will get added in the application start. One of the goal of the MVCExtensions is to reduce the above design smell. Instead of writing all the plumbing code in the application start, it contains BootstrapperTask to register individual services. Out of the box, it contains BootstrapperTask to register Controllers, Controller Factory, Action Invoker, Action Filters, Model Binders, Model Metadata/Validation Providers, ValueProvideraFactory, ViewEngines etc and it is intelligent enough to automatically detect the above types and register into the ASP.NET MVC Framework. Other than the built-in tasks you can create your own custom task which will be automatically executed when the application starts. When the BootstrapperTasks are in action you will find the global.asax pretty much clean like the following: public class MvcApplication : UnityMvcApplication { public void ErrorLog_Filtering(object sender, ExceptionFilterEventArgs e) { Check.Argument.IsNotNull(e, "e"); HttpException exception = e.Exception.GetBaseException() as HttpException; if ((exception != null) && (exception.GetHttpCode() == (int)HttpStatusCode.NotFound)) { e.Dismiss(); } } } The above code is taken from my another open source project Shrinkr, as you can see the global.asax is longer cluttered with any plumbing code. One special thing you have noticed that it is inherited from the UnityMvcApplication rather than regular HttpApplication. There are separate version of this class for each IoC Container like NinjectMvcApplication, StructureMapMvcApplication etc. Other than executing the built-in tasks, the Shrinkr also has few custom tasks which gets executed when the application starts. For example, when the application starts, we want to ensure that the default users (which is specified in the web.config) are created. The following is the custom task that is used to create those default users: public class CreateDefaultUsers : BootstrapperTask { protected override TaskContinuation ExecuteCore(IServiceLocator serviceLocator) { IUserRepository userRepository = serviceLocator.GetInstance<IUserRepository>(); IUnitOfWork unitOfWork = serviceLocator.GetInstance<IUnitOfWork>(); IEnumerable<User> users = serviceLocator.GetInstance<Settings>().DefaultUsers; bool shouldCommit = false; foreach (User user in users) { if (userRepository.GetByName(user.Name) == null) { user.AllowApiAccess(ApiSetting.InfiniteLimit); userRepository.Add(user); shouldCommit = true; } } if (shouldCommit) { unitOfWork.Commit(); } return TaskContinuation.Continue; } } There are several other Tasks in the Shrinkr that we are also using which you will find in that project. To create a custom bootstrapping task you have create a new class which either implements the IBootstrapperTask interface or inherits from the abstract BootstrapperTask class, I would recommend to start with the BootstrapperTask as it already has the required code that you have to write in case if you choose the IBootstrapperTask interface. As you can see in the above code we are overriding the ExecuteCore to create the default users, the MVCExtensions is responsible for populating the ServiceLocator prior calling this method and in this method we are using the service locator to get the dependencies that are required to create the users (I will cover the custom dependencies registration in the next post). Once the users are created, we are returning a special enum, TaskContinuation as the return value, the TaskContinuation can have three values Continue (default), Skip and Break. The reason behind of having this enum is, in some special cases you might want to skip the next task in the chain or break the complete chain depending upon the currently running task, in those cases you will use the other two values instead of the Continue. The last thing I want to cover in the bootstrapping task is the Order. By default all the built-in tasks as well as newly created task order is set to the DefaultOrder(a static property), in some special cases you might want to execute it before/after all the other tasks, in those cases you will assign the Order in the Task constructor. For Example, in Shrinkr, we want to run few background services when the all the tasks are executed, so we assigned the order as DefaultOrder + 1. Here is the code of that Task: public class ConfigureBackgroundServices : BootstrapperTask { private IEnumerable<IBackgroundService> backgroundServices; public ConfigureBackgroundServices() { Order = DefaultOrder + 1; } protected override TaskContinuation ExecuteCore(IServiceLocator serviceLocator) { backgroundServices = serviceLocator.GetAllInstances<IBackgroundService>().ToList(); backgroundServices.Each(service => service.Start()); return TaskContinuation.Continue; } protected override void DisposeCore() { backgroundServices.Each(service => service.Stop()); } } That’s it for today, in the next post I will cover the custom service registration, so stay tuned.

Read the article

Install Ubuntu Netbook Edition with Wubi Installer

- by Matthew Guay

Ubuntu is one of the most popular versions of Linux, and their Netbook Remix edition is especially attractive for netbook owners. Here we’ll look at how you can easily try out Ubuntu on your netbook without a CD/DVD drive. Netbooks, along with the growing number of thin, full powered laptops, lack a CD/DVD drive. Installing software isn’t much of a problem since most programs, whether free or for-pay, are available for download. Operating systems, however, are usually installed from a disk. You can easily install Windows 7 from a flash drive with our tutorial, but installing Ubuntu from a USB flash drive is more complicated. However, using Wubi, a Windows installer for Ubuntu, you can easily install it directly on your netbook and even uninstall it with only a few clicks. Getting Started Download and run the Wubi installer for Ubuntu (link below). In the installer, select the drive you where you wish to install Ubuntu, the size of the installation (this is the amount dedicated to Ubuntu; under 20Gb should be fine), language, username, and desired password. Also, from the Desktop environment menu, select Ubuntu Netbook to install the netbook edition. Click Install when your settings are correct. Wubi will automatically download the selected version of Ubuntu and install it on your computer. Windows Firewall may ask if you want to unblock Wubi; select your network and click Allow access. The download will take around an hour on broadband, depending on your internet connection speed. Once the download is completed, it will automatically install to your computer. If you’d prefer to have everything downloaded before you start the install, download the ISO of Ubuntu Netbook edition (link below) and save it in the same folder as Wubi. Then, when you run Wubi, select the netbook edition as before and click Install. Wubi will verify that your download is valid, and will then proceed to install from the downloaded ISO. This install will only take about 10 minutes. Once the install is finished you will be asked to reboot your computer. Save anything else you’re working on, and then reboot to finish setting up Ubuntu on your netbook. When your computer reboots, select Ubuntu at the boot screen. Wubi leaves the default OS as Windows 7, so if you don’t select anything it will boot into Windows 7 after a few seconds. Ubuntu will automatically finish the install when you boot into it the first time. This took about 12 minutes in our test. When the setup is finished, your netbook will reboot one more time. Remember again to select Ubuntu at the boot screen. You’ll then see a second boot screen; press your Enter key to select the default. Ubuntu only took less than a minute to boot in our test. When you see the login screen, select your name and enter your password you setup in Wubi. Now you’re ready to start exploring Ubuntu Netbook Remix. Using Ubuntu Netbook Remix Ubuntu Netbook Remix offers a simple, full-screen interface to take the best advantage of netbooks’ small screens. Pre-installed applications are displayed in the application launcher, and are organized by category. Click once to open an application. The first screen on the application launcher shows your favorite programs. If you’d like to add another application to the favorites pane, click the plus sign beside its icon. Your files from Windows are still accessible from Ubuntu Netbook Remix. From the home screen, select Files & Folders on the left menu, and then click the icon that says something like 100GB Filesystem under the Volumes section. Now you’ll be able to see all of your files from Windows. Your user files such as documents, music, and pictures should be located in Documents and Settings in a folder with your user name. You can also easily install a variety of free applications via the Software Installer. Connecting to the internet is also easy, as Ubuntu Netbook Remix automatically recognized the WiFi adaptor on our test netbook, a Samsung N150. To connect to a wireless network, click the wireless icon on the top right of the screen and select the network’s name from the list. And, if you’d like to customize your screen, right-click on the application launcher and select Change desktop background. Choose a background picture you’d like. Now you’ll see it through your application launcher. Nice! Most applications are opened full-screen. You can close them by clicking the x on the right of the program’s name. You can also switch to other applications from their icons on the top left. Open the home screen by clicking the Ubuntu logo in the far left. Changing Boot Options By default, Wubi will leave Windows as the default operating system, and will give you 10 seconds at boot to choose to boot into Ubuntu. To change this, boot into Windows and enter Advanced system settings in your start menu search. In this dialog, click Settings under Startup and Recovery. From this dialog, you can select the default operating system and the time to display list of operating systems. You can enter a lower number to make the boot screen appear for less time. And if you’d rather make Ubuntu the default operating system, select it from the drop-down list. Uninstalling Ubuntu Netbook Remix If you decide you don’t want to keep Ubuntu Netbook Remix on your computer, you can uninstall it just like you uninstall any normal application. Boot your computer into Windows, open Control Panel, click Uninstall a Program, and enter ubuntu in the search box. Select it, and click Uninstall. Click Uninstall at the prompt. Ubuntu uninstalls very quickly, and removes the entry from the bootloader as well, so your computer is just like it was before you installed it. Conclusion Ubuntu Netbook Remix offers an attractive Linux interface for netbooks. We enjoyed trying it out, and found it much more user-friendly than most Linux distros. And with the Wubi installer, you can install it risk-free and try it out on your netbook. Or, if you’d like to try out another alternate netbook operating system, check out our article on Jolicloud, another new OS for netbooks. Links Download Wubi Installer for Windows Download Ubuntu Netbook Edition Similar Articles Productive Geek Tips Easily Install Ubuntu Linux with Windows Using the Wubi InstallerInstall VMware Tools on Ubuntu Edgy EftHow to install Spotify in Ubuntu 9.10 using WineInstalling PHP5 and Apache on UbuntuInstalling PHP4 and Apache on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins Cool Looking Skins for Windows Media Player 12 Move the Mouse Pointer With Your Face Movement Using eViacam Boot Windows Faster With Boot Performance Diagnostics

Read the article

Validation in Silverlight

- by Timmy Kokke

Getting started with the basics Validation in Silverlight can get very complex pretty easy. The DataGrid control is the only control that does data validation automatically, but often you want to validate your own entry form. Values a user may enter in this form can be restricted by the customer and have to fit an exact fit to a list of requirements or you just want to prevent problems when saving the data to the database. Showing a message to the user when a value is entered is pretty straight forward as I’ll show you in the following example. This (default) Silverlight textbox is data-bound to a simple data class. It has to be bound in “Two-way” mode to be sure the source value is updated when the target value changes. The INotifyPropertyChanged interface must be implemented by the data class to get the notification system to work. When the property changes a simple check is performed and when it doesn’t match some criteria an ValidationException is thrown. The ValidatesOnExceptions binding attribute is set to True to tell the textbox it should handle the thrown ValidationException. Let’s have a look at some code now. The xaml should contain something like below. The most important part is inside the binding. In this case the Text property is bound to the “Name” property in TwoWay mode. It is also told to validate on exceptions. This property is false by default. <StackPanel Orientation="Horizontal"> <TextBox Width="150" x:Name="Name" Text="{Binding Path=Name, Mode=TwoWay, ValidatesOnExceptions=True}"/> <TextBlock Text="Name"/> </StackPanel> The data class in this first example is a very simplified person class with only one property: string Name. The INotifyPropertyChanged interface is implemented and the PropertyChanged event is fired when the Name property changes. When the property changes a check is performed to see if the new string is null or empty. If this is the case a ValidationException is thrown explaining that the entered value is invalid. public class PersonData:INotifyPropertyChanged { private string _name; public string Name { get { return _name; } set { if (_name != value) { if(string.IsNullOrEmpty(value)) throw new ValidationException("Name is required"); _name = value; if (PropertyChanged != null) PropertyChanged(this, new PropertyChangedEventArgs("Name")); } } } public event PropertyChangedEventHandler PropertyChanged=delegate { }; } The last thing that has to be done is letting binding an instance of the PersonData class to the DataContext of the control. This is done in the code behind file. public partial class Demo1 : UserControl { public Demo1() { InitializeComponent(); this.DataContext = new PersonData() {Name = "Johnny Walker"}; } } Error Summary In many cases you would have more than one entry control. A summary of errors would be nice in such case. With a few changes to the xaml an error summary, like below, can be added. First, add a namespace to the xaml so the control can be used. Add the following line to the header of the .xaml file. xmlns:Controls="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls.Data.Input" Next, add the control to the layout. To get the result as in the image showed earlier, add the control right above the StackPanel from the first example. It’s got a small margin to separate it from the textbox a little. <Controls:ValidationSummary Margin="8"/> The ValidationSummary control has to be notified that an ValidationException occurred. This can be done with a small change to the xaml too. Add the NotifyOnValidationError to the binding expression. By default this value is set to false, so nothing would be notified. Set the property to true to get it to work. <TextBox Width="150" x:Name="Name" Text="{Binding Name, Mode=TwoWay, ValidatesOnExceptions=True, NotifyOnValidationError=True}"/> Data annotation Validating data in the setter is one option, but not my personal favorite. It’s the easiest way if you have a single required value you want to check, but often you want to validate more. Besides, I don’t consider it best practice to write logic in setters. The way used by frameworks like WCF Ria Services is the use of attributes on the properties. Instead of throwing exceptions you have to call the static method ValidateProperty on the Validator class. This call stays always the same for a particular property, not even when you change the attributes on the property. To mark a property “Required” you can use the RequiredAttribute. This is what the Name property is going to look like: [Required] public string Name { get { return _name; } set { if (_name != value) { Validator.ValidateProperty(value, new ValidationContext(this, null, null){ MemberName = "Name" }); _name = value; if (PropertyChanged != null) PropertyChanged(this, new PropertyChangedEventArgs("Name")); } } } The ValidateProperty method takes the new value for the property and an instance of ValidationContext. The properties passed to the constructor of the ValidationContextclass are very straight forward. This part is the same every time. The only thing that changes is the MemberName property of the ValidationContext. Property has to hold the name of the property you want to validate. It’s the same value you provide the PropertyChangedEventArgs with. The System.ComponentModel.DataAnnotation contains eight different validation attributes including a base class to create your own. They are: RequiredAttribute Specifies that a value must be provided. RangeAttribute The provide value must fall in the specified range. RegularExpressionAttribute Validates is the value matches the regular expression. StringLengthAttribute Checks if the number of characters in a string falls between a minimum and maximum amount. CustomValidationAttribute Use a custom method to validate the value. DataTypeAttribute Specify a data type using an enum or a custom data type. EnumDataTypeAttribute Makes sure the value is found in a enum. ValidationAttribute A base class for custom validation attributes All of these will ensure that an validation exception is thrown, except the DataTypeAttribute. This attribute is used to provide some additional information about the property. You can use this information in your own code. [Required] [Range(0,125,ErrorMessage = "Value is not a valid age")] public int Age { It’s no problem to stack different validation attributes together. For example, when an Age is required and must fall in the range from 0 to 125: [Required, StringLength(255,MinimumLength = 3)] public string Name { Or in one row like this, for a required Name with at least 3 characters and a maximum of 255: Delayed validation Having properties marked as required can be very useful. The only downside to the technique described earlier is that you have to change the value in order to get it validated. What if you start out with empty an empty entry form? All fields are empty and thus won’t be validated. With this small trick you can validate at the moment the user click the submit button. <TextBox Width="150" x:Name="NameField" Text="{Binding Name, Mode=TwoWay, ValidatesOnExceptions=True, NotifyOnValidationError=True, UpdateSourceTrigger=Explicit}"/> By default, when a TwoWay bound control looses focus the value is updated. When you added validation like I’ve shown you earlier, the value is validated. To overcome this, you have to tell the binding update explicitly by setting the UpdateSourceTrigger binding property to Explicit: private void SubmitButtonClick(object sender, RoutedEventArgs e) { NameField.GetBindingExpression(TextBox.TextProperty).UpdateSource(); } This way, the binding is in two direction but the source is only updated, thus validated, when you tell it to. In the code behind you have to call the UpdateSource method on the binding expression, which you can get from the TextBox. Conclusion Data validation is something you’ll probably want on almost every entry form. I always thought it was hard to do, but it wasn’t. If you can throw an exception you can do validation. If you want to know anything more in depth about something I talked about in this article let me know. I might write an entire post to that.

Read the article

Getting Started with Media Browser for Windows Media Center

- by DigitalGeekery

If you are a Windows Media Center user, you’ll really want to check out Media Browser. The Media Browser plug-in for Windows Media Center takes your digital media files and displays them in a visually appealing, user friendly interface, complete with images and metadata. Requirements Windows 7 or Vista Microsoft .Net 3.5 Framework Preparing your Media Files For Media Browser to be able to automatically download images and metadata for your media libraries, your files will have to be correctly named. For example, if you have an mp4 file of the movie Batman Begins, it needs to be named Batman Begins.mp4. It cannot be Batmanbegins.mp4 or Batman-begins.mp4. Otherwise, it’s unlikely that Media Browser will display images and metadata. If you find some of your files aren’t pulling cover art or metadata, double-check the official title of the media on a site like IMBD.com. TV Show files TV show files are handled a bit differently. Every TV series in your collection must have a main folder with the show’s name and individual subfolders for each season. Here is an example of folder structure and supported naming conventions. TV Shows\South Park\Season 1\s01e01 – episode 1.mp4 TV Shows\South Park\Season 1\South Park 1×01 – episode 1.mp4 TV Shows\South Park\Season 1\101 – episode 1.mp4 Note: You need to always have a Season 1 folder even if the show only has only one season. If you have several seasons of a particular show, but don’t happen to have Season 1, simply create a blank season 1 folder. Without a season 1 folder, other seasons will not display properly. Installation and Configuration Download and run the latest Media Browser .msi file by taking the defaults. (Download link below) When you reach the final window, leave the “Configure initial settings” box checked, and click “Finish.” You may get a pop up window informing you that folder permissions are not set correctly for Media Browser. Click “Yes.” Adding Your Media The Browser Configuration Tool should have opened automatically. If not, you can open it by going to Start > All Programs > Media Browser > Media Browser Configuration Wizard. To begin adding media files, click “Add.” Browse for a folder that contains media files and click “OK.” Here we are adding a folder with a group of movie files. You can add multiple folders to each media library. For example, if you have movie files stored in 4 or 5 different folders, you can add them all under a single library in Media Browser. To add additional folders, click the “Add” button on the right side under your currently added folder. The “Add” button to the left will add an additional Media Library, such as one for TV Shows. When you are finished, close out of the Media Browser Configuration Tool. Open Windows Media Center. You will see Media Browser tile on the main interface. Click to open it. When you initially open Media Browser, you will be prompted to run the initial configuration. Click “OK.” You will see a few general configuration options. The important option is the Metadata. Leave this option checked (it is by default) if you wish to pull images & other metadata for your media. When finished, click “Continue,” and then “OK” to restart Media Browser. When you re-enter Media Browser you’ll see your Media Categories listed below, and recently added files in the main display. Click on a Media Library to view the files. Click “View” at the top to check out some of the different display options to choose from. Below you see can “Detail.” This presents your videos in a list to the left. When you hover over a title, the synopsis and cover art is displayed to the right. “Cover Flow” displays your titles in a right to left format with mirror cover art. “Thumb Strip” displays your titles in a strip along the bottom with a synopsis, image, and movie data above. Configurations Settings and options can be changed through the Media Browser Configuration Tool, or directly in Media Browser by clicking on the “Wrench” at the bottom right of the main Media Browser page. Certain settings may only be available in one location or the other. Some will be available in both places. Plug-ins and Themes Media Browser features a variety of Plug-ins and Themes that can add optional customization and slick visual appeal. To install plug-ins or themes, open the Media Browser Configuration Tool. Click on the “plug-ins” tab, and then the “More Plug-ins…” button. Note: Clicking on “Advanced” at the top will reveal several additional configuration tabs. Browse the list of plug-ins on the left. When you find want you like, select it and then click “Install.” When the install is complete, you’ll see them listed under “Installed Plug-ins.” To activate any installed theme, click on the “Display” tab. Select it from the Visual Theme drop down list. Close out of the Media Browser Configuration Tool when finished. Some themes, such as the “Diamond” theme shown below, include optional views and settings which can be accessed through a configuration button at the top of the screen. Clicking on the movie gives you additional images and information such as a synopsis, runtime, IMDB rating… … and even actors and character names. All that’s left is to hit “Play” when you’re ready to watch. Conclusion Media Browser is a fantastic plug-in that brings an entirely different level of media management and aesthetics to Windows Media Center. There are numerous additional customizations and configurations we have not covered here such as adding film trailers, music support, and integrating Recorded TV. Media Browser will run on both Windows 7 and Vista. Extenders are also supported but may require additional configuration. Download Media Browser Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Schedule Updates for Windows Media CenterIntegrate Hulu Desktop and Windows Media Center in Windows 7Add Color Coding to Windows 7 Media Center Program GuideIntegrate Boxee with Media Center in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 If it were only this easy SyncToy syncs Files and Folders across Computers on a Network (or partitions on the same drive) Classic Cinema Online offers 100’s of OnDemand Movies OutSync will Sync Photos of your Friends on Facebook and Outlook Windows 7 Easter Theme YoWindoW, a real time weather screensaver

Read the article

Michael Crump’s notes for 70-563 PRO – Designing and Developing Windows Applications usi

- by mbcrump

TIME TO GO PRO! This is my notes for 70-563 PRO – Designing and Developing Windows Applications using .NET Framework 3.5 I created it using several resources (various certification web sites, msdn, official ms 70-548 book). The reason that I created this review is because a) I am taking the exam. b) MS did not create a book for this exam. Use the(MS 70-548)book. c) To make sure I am familiar with each before the exam. I hope that it provides a good start for your own notes. I hope that someone finds this useful. At least, it will give you a starting point of what to expect to know on the PRO exam. Also, for those wondering, the PRO exam does contains very little code. It is basically all theory. 1. Validation Controls – How to prevent users from entering invalid data on forms. (MaskedTextBox control and RegEx) 2. ServiceController – used to start and control the behavior of existing services. 3. User Feedback (know winforms Status Bar, Tool Tips, Color, Error Provider, Context-Sensitive and Accessibility) 4. Specific (derived) exceptions must be handled before general (base class) exceptions. By moving the exception handling for the base type Exception to after exception handling of ArgumentNullException, all ArgumentNullException thrown by the Helper method will be caught and logged correctly. 5. A heartbeat method is a method exposed by a Web service that allows external applications to check on the status of the service. 6. New users must master key tasks quickly. Giving these tasks context and appropriate detail will help. However, advanced users will demand quicker paths. Shortcuts, accelerators, or toolbar buttons will speed things along for the advanced user. 7. MSBuild uses project files to instruct the build engine what to build and how to build it. MSBuild project files are XML files that adhere to the MSBuild XML schema. The MSBuild project files contain complete file, build action, and dependency information for each individual projects. 8. Evaluating whether or not to fix a bug involves a triage process. You must identify the bug's impact, set the priority, categorize it, and assign a developer. Many times the person doing the triage work will assign the bug to a developer for further investigation. In fact, the workflow for the bug work item inside of Team System supports this step. Developers are often asked to assess the impact of a given bug. This assessment helps the person doing the triage make a decision on how to proceed. When assessing the impact of a bug, you should consider time and resources to fix it, bug risk, and impacts of the bug. 9. In large projects it is generally impossible and unfeasible to fix all bugs because of the impact on schedule and budget. 10. Code reviews should be conducted by a technical lead or a technical peer. 11. Testing Applications 12. WCF Services – application state 13. SQL Server 2005 / 2008 Express Edition – reliable storage of data / Microsoft SQL Server 3.5 Compact Database– used for client computers to retrieve and save data from a shared location. 14. SQL Server 2008 Compact Edition – used for minimum possible memory and can synchronize data with a corporate SQL Server 2008 Database. Supports offline user and minimum dependency on external components. 15. MDI and SDI Forms (specifically IsMDIContainer) 16. GUID – in the case of data warehousing, it is important to define unique keys. 17. Encrypting / Security Data 18. Understanding of Isolated Storage/Proper location to store items 19. LINQ to SQL 20. Multithreaded access 21. ADO.NET Entity Framework model 22. Marshal.ReleaseComObject 23. Common User Interface Layout (ComboBox, ListBox, Listview, MaskedTextBox, TextBox, RichTextBox, SplitContainer, TableLayoutPanel, TabControl) 24. DataSets Class - http://msdn.microsoft.com/en-us/library/system.data.dataset%28VS.71%29.aspx 25. SQL Server 2008 Reporting Services (SSRS) 26. SystemIcons.Shield (Vista UAC) 27. Leverging stored procedures to perform data manipulation for a database schema that can change. 28. DataContext 29. Microsoft Windows Installer Packages, ClickOnce(bootstrapping features), XCopy. 30. Client Application Services – will authenticate users by using the same data source as a ASP.NET web application. 31. SQL Server 2008 Caching 32. StringBuilder 33. Accessibility Guidelines for Windows Applications http://msdn.microsoft.com/en-us/library/ms228004.aspx 34. Logging erros 35. Testing performance related issues. 36. Role Based Security, GenericIdentity and GenericPrincipal 37. System.Net.CookieContainer will store session data for webapps (see isolated storage for winforms) 38. .NET CLR Profiler tool will identify objects that cause performance issues. 39. ADO.NET Synchronization (SyncGroup) 40. Globalization - CultureInfo 41. IDisposable Interface- reports on several questions relating to this. 42. Adding timestamps to determine whether data has changed or not. 43. Converting applications to .NET Framework 3.5 44. MicrosoftReportViewer 45. Composite Controls 46. Windows Vista KNOWN folders. 47. Microsoft Sync Framework 48. TypeConverter -Provides a unified way of converting types of values to other types, as well as for accessing standard values and sub properties. http://msdn.microsoft.com/en-us/library/system.componentmodel.typeconverter.aspx 49. Concurrency control mechanisms The main categories of concurrency control mechanisms are: Optimistic - Delay the checking of whether a transaction meets the isolation rules (e.g., serializability and recoverability) until its end, without blocking any of its (read, write) operations, and then abort a transaction, if the desired rules are violated. Pessimistic - Block operations of a transaction, if they may cause violation of the rules. Semi-optimistic - Block operations in some situations, and do not block in other situations, while delaying rules checking to transaction's end, as done with optimistic. 50. AutoResetEvent 51. Microsoft Messaging Queue (MSMQ) 4.0 52. Bulk imports 53. KeyDown event of controls 54. WPF UI components 55. UI process layer 56. GAC (installing, removing and queuing) 57. Use a local database cache to reduce the network bandwidth used by applications. 58. Sound can easily be annoying and distracting to users, so use it judiciously. Always give users the option to turn sound off. Because a user might have sound off, never convey important information through sound alone.

Search Results

Search found 15139 results on 606 pages for 'scripting interface'.

Page 356/606 | < Previous Page | 352 353 354 355 356 357 358 359 360 361 362 363 | Next Page >

- by philcolbourn

- by Swartz

- by Christian

- by netllama

- by jefflunt

- by Kushagra Bhatnagar

- by Fantomas

- by Dan Short

- by Kushagra Bhatnagar

- by tim

- by senorsmile

- by Chris

- by Dema

- by arheops

- by Brendan

- by Brian Stinar

- by kobaltz

- by REA_ANDREW

- by rajbk

- by Honglin Su

- by kazimanzurrashid

- by Matthew Guay

- by Timmy Kokke

- by DigitalGeekery

- by mbcrump

< Previous Page | 352 353 354 355 356 357 358 359 360 361 362 363 | Next Page >