Search Results

Search found 13249 results on 530 pages for 'virtualized performance'.

Page 357/530 | < Previous Page | 353 354 355 356 357 358 359 360 361 362 363 364  | Next Page >

• Dell PowerEdge 6850 Degraded HDD

  - by Matt

  Good Morning, We have a dell power edge 6850 with a degraded drive in the RAID array. I have never had to recover such an issue, so any help or advice would be welcome. Basically it hasn't affected the server at an operating system level, but has slowed down performance, I have a replacement drive in hand but as this is our main database server I want to proceed with extreme caution. My options as I see them are - Can I just hot swap the degraded drive with the new one and the data will automatically re-sync and we are all back to normal presumably this is dependant on the current raid configuration? reading various comments on-line I may need to re-configure the RAID array and re-build the broken drive? This screams disaster to me with the main worry being that I wipe any other data. Option 1 would of course make my day. Thanks in advance

  Read the article

• BES 5.0 and MAPI calls to exchange system

  - by nysingh

  We have been using BES 4.1(5) for a while now and it has been a resource hog on exchange due to high number of MAPI calls. I have heard that BES 5.0 is even worse. the comparison i heard is that BES 4.1 is makes MAPI calls equal to 5 outlook clients per BB user and BES 5.0 makes MAPI calls equal to 10 outlook clients per BB user. can someone confirm if it is true? is BES 5.0 is really that bad in MAPI calls and for exchange performance. ? thanks

  Read the article

• misaligned raid partition in Ubuntu 10.04

  - by Linux Jedi

  I attached two identical hard drives to my linux machine. Then using gparted I formated the first 1024 mb at the beginning of each drive as linux swap space. Then I went into system-administration-disk utility. In there I went to file-create-RAID array. I selected the remaining space in each of the two identical hard drives and created a striped raid array. After the array was created, a warning message appeared. It said "The partition is misaligned by 522240 bytes. This may result in very poor performance. Repartitioning is suggested." What do I do now? As far as I can tell, the partitions are identical.

  Read the article

• using munin-plugins-rails to monitor rails app perfromance

  - by user2099762

  I have been trying to configure munin-plugins-rails to monitor the performance of our rails apps from Munin. The graphs appear, but no data is shown in the graphs. The log files show Error output from : 2013/06/27-15:39:06 [5540] Request-log-analyzer, by Willem van Bergen and $ 2013/06/27-15:39:06 [5540] Website: http://railsdoctors.com I have tried running Request-log-analyzer manually and pointing it at the production log file, and this reports as % for every item. There is data in the log file. I have tried changing the version of the gems installed, and also the type of the log file, but no luck. Any ideas anyone? Thanks

  Read the article

• What are my X client options for MS Windows?

  - by Nick Bolton

  I need to connect to a headless X Windows server (running on Ubuntu) from my MS Windows 7 computer over a 100 Mbit network. I could use VNC (or any other remote viewer) but the 3D graphics performance would be lousy I imagine. I used to have it hooked up to a monitor, but that's broken now and I can't afford a new one. A friend advised that I could try and use an X client, and that the 3D graphics wont suffer too much over 100 Mbit. Cygwin seems to be an option, but I was wondering if there were any more lightweight options.

  Read the article

• Apache worker is crashing after 3.000 users

  - by user1618606

  I activated Apache Worker on my VPS and I'm having problems, 'cause the website is crashing when 3000 users are accessing the website. I'm using http://whos.amung.us/stats/2jzwlvbhvpft/ as counter. My Apache Worker configuration: KeepAlive On MaxKeepAliveRequests 0 KeepAliveTimeout 1 <IfModule mpm_worker_module> ServerLimit 20000 StartServer 8000 MinSpareThreads 10400 MaxSpareThreads 14200 ThreadLimit 5 ThreadsPerChild 5 MaxClients 20000 MaxRequestsPerChild 0 </IfModule> The VPS have the SO: Debian 64 LAMP, memory: 14gb and CPU: 24ghz What I could to do to give a best performance?

  Read the article

• Evaluate a vendor laptop before deployment to user?

  - by NetWarrior

  I get numerous requests from executives and users for new smaller laptops for travel purposes. Most of my evaluation is based upon whether or not it can run certain applications. Mainly lotus notes, office, and video. Most of the laptops include windows 7 OS, and are fully loaded with ram, a high-end processor and a integrated graphics card. My boss whats me to document the usefulness of the laptop and performance. I'm just a little confused on how to setup a document that can be used by members of the IT department for future evaluations.

  Read the article

• Few questions on giga tweaker

  - by user23950

  I better consult first the people here before I do anything unnecessary using this app called giga tweaker. I don't really understand what this increase the performance of your CPU thing. It is under Customization-Memory Management-ram & disk cache of giga tweaker. What will happen if I change the level cache size of l2 cache into the highest possible value which is 8Mb. What are the negative effects of doing it? The file system caching memory, still under Customization-Memory Management-ram & disk cache. What effects will it have on my system which has 2Gb of Ram and 2.50 Ghz of Dual Core CPU. Please enlighten me.

  Read the article

• Debian, CentOS, Slackware, FreeBSD, OpenSolaris and Ubuntu Server Edition: Which one to use for an http web server?

  - by Ako

  I am going to install and administrate a virtual server for a small university. The server should run inside a virtual machine (VirtualBox OSE). It is only used in the university network and is invisible to the outside world. It should run Apache web server for PHP, MySQL and probably a mail server. I don't know which OS to use. Main criteria for choosing include ease of administration and updating, package management and performance. I wonder if anyone has any suggestions? And candidate OSs are: Debian, Ubuntu, CentOS, Slackware, FreeBSD, OpenSolaris. Add any other OS if you know any better alternatives.

  Read the article

• How to check if redis master is OK?

  - by e-satis

  On the documentation, they advice the monitor command. But it has a 50% performance penalty for the whole system, and how should I do that ? Whatching the ouput using SSH until I don't see anything ? Let's say I have 3 servers: 1 with a redis master, 1 with a redis slave, and one with my website querying the redis master. How can I, from my website server, make cleany the decision to fallback to the slave by sending the SLAVEOF NO ONE command ? My first step would be to put some kind of timeout check with a simple ping, just to be sure the server is online. But for redis specifically, I have no clue.

  Read the article

• Restricting permissions to individual documents on SharePoint

  - by wahle509

  Here's what I'm trying to do: I would like to create a list of documents on a site in my company's SharePoint site. Each document should have specific user's permissions to view and edit it. For example: The list is for performance reports. John has his out there called "John_PR_09.docx". Only him and his supervisor should have permissions to view, edit, or do anything to it. And then another employee has hers out there with permissions for only her and her supervisor, and so on... I have tested this out with a document that I removed the groups and users from (since they inherit permissions from it's parent) and only gave my user account permissions to. I then asked someone else to try and open and she could, she even wrote "TEST" on the document and saved it. What am I doing wrong? I thought I stopped it from inheriting permissions from it's parent and only gave myself rights to edit it.

  Read the article

• What's faster for web-server virtualization ? (virtualbox or KVM)

  - by marc

  I have question, does anyone try to set up a webserver (debian) using virtualbox (x64) ? Right now i have few servers in KVM (x64) but i think it work slowly... Can i get something more (faster, performance) using virtualbox (x64)? On my home installation it looks very fast. Should i move to vbox against kvm ? I'm looking for answer from someone who have in virtualbox (x64) real server (can be headless) (debian/ubuntu) not windows xp or other home using things ;) I also got xp, 2k3, ubuntu in virtualbox (x86) and for me looking faster than kvm(x64). But it's hard to say anything without real tests done by multiple users not just one.

  Read the article

• Bigger ProjectServer farm is performing worse

  - by MSPS DBA

  I am using Project Server 2007 sp3 with SharePoint 2007 sp3 and SQL Server 2008 r2. I have recently moved my farm from 2 servers (1 DB and 1 App/Web) to a very big farm having Many Servers, Clustered Database, Load Balancer, Powerful processors and Large RAM. This Farm has more than one Web Servers, Project App Servers, SharePoint App Servers and a separate Index Server. But the performance of Project Server in the new Farm has been downgraded. Views are taking even more time to load data and Project publishing time has also been increased. I am also facing deadlock problems which are causing the project server queue jobs to fail. Could anyone inform me that what would be the reason of this problem and what should be the starting point to look into the issue? Is it mainly because now the application server needs to communicate with other application servers which were not needed in the previous farm? Thanks!

  Read the article

• Intel hybrid graphics stuck in power save mode

  - by OZZIE

  I have an Asus UL30V with Intel hybrid graphics. When I bought it it used to switch to turn of the better graphics card to save power and run on a more power effecient one. When I connected the laptop to a power source again I could go to the intel graphics icon on the task bar and click on "switch to enhanced performance mode" or something similar. But like 2-3 months ago it suddenly vanished. I cannot switch modes anymore, it's gotten stuck in power save mode. I can change the windows power setting but that doesn't enable the better graphics card :( What should I do? I've tried restarting the computer and that does not work. I really hope I don't have to reinstall the drivers! It seems like other people have had the same issue: http://en.community.dell.com/support-forums/laptop/f/3518/p/19422695/19994601.aspx , he hasn't even got the same computer as me. I have windows 7 Home Premium x64 Any ideas?

  Read the article

• Apache CPU usage stays at 100% even when there are no requests

  - by Leirith

  Hi, I've been running the Apache HTTP server benchmarking tool (ab) on my new Apache server to test performance. I noticed that with a command like the following: ab -n 100000 -c 1000 http://www.mysite.com/ The CPU is used 100% by the apache2 processes during the testing. When the test concludes, usually with the following error just before the last requests are made: apr_poll: The timeout specified has expired (70007) Total of 99960 requests completed the CPU usage remains at 100%, and it's all being consumed by apache. I am using the worker MPM with and running PHP with mod_fcgid. Any advice as to why this is or what can be done to stop it would be appreciated.

  Read the article

• How do I lower idle cpu usage in ubuntu linux? Gnome or KDE Variants

  - by Jasen

  My question comes from a kde desktop currently, but it also happens with the gnome instance. When just sitting there, with only the cpu monitor widget running. no open windows, no background processes other than the desktop, my cpu is at ~20%. I wanna know how to fix this, and possibly get better performance out of it. When running my windows side, the cpu will sit at zero, and i generally load new programs about 400ms faster. With windows 7 being as slow as it is, this is not acceptable. and the widget is only set to check every 500ms, so im almost completely sure its not the widget. My system is a Gateway nv 53 amd 2.0 ghz turion with 4 gb of installed ram, and 500 gb hd. both linux and windows are 64 bit. average ram use on either system is about 1.4 gb for just the os

  Read the article

• When is it time to buy a new hard drive, and what considerations go into buying a new hard drive?

  - by user1125620

  I've had my current hard drive for about 4-5 years now, and I've never had a problem with it before, but now it's making whirring noises. It's done this before and, last time, the noise did go away the next day, but I have accumulated quite a bit of information that I wouldn't want to lose on the drive. HD Tune Pro and Berlac Advisor both said the drive was healthy, and I wouldn't want to get a new one unless it was absolutely necessary or was going to show drastic performance improvements. My only knock against the drive would be that Visual Studio takes longer to load than I'd like it to. HD Tune Pro says the average read speed is 54.3MB/s. I'm not sure if that's good or bad, but it seems about average compared to similar drives on http://www.hdtune.com/testresults.html. Model #: WDC WD5000AAJS-22YFA0 So, should hard drives be replaced after a certain amount of time? Has mine reached that point? Would a new hard drive be any faster?

  Read the article

• Very slow Windows 7 on Thinkpad T61

  - by bogdanf

  I have a very strange problem with my fresh install of Windows 7 Profesional, 64bits on my Lenovo Thinkpad T61 : The overal performance is very slow, the disk is constantly spinning, even without any program running (after boot, no other programs installed). The boot process is very slow itself (4-5 minutes). I mention that the laptop was fine on XP until the upgrade. Thanks ! Additional info (as requested by the comments) : 2GB RAM Yes, I added all the manufacturer (Lenovo) drivers and updates (using the utility provided by Lenovo) Tried with both 32 and 64 bits editions. The 32 bits one is performing a little better, but not very usable either. The hdd has enough space (20 GB or so) The problem is still present on a fresh install, so no recycle bin emptying or unistall programs (there aren't any except plain 7) would help. I'm not a newbie, so no obvious causes are left unchecked

  Read the article

• Any limitations for putting an SSD in a Mini? How fast would an external HDD be via Firewire? Is Ser

  - by Cyrcle

  I'm considering getting a Mini for web programming. I do a lot of text searches so I want to put a SSD in it. Does the Mini have any limitations that might effect the performance of a SSD? I'm trying to decide if I should get a Mini Server. I'd like to be able to have two internal drives so one can be SSD for OS and the code I'm working on, and the other can be my storage drive. However, I'm not sure if I'll be using the extra functionality of the server edition OSX or not, so I'm reluctant to pay the $200 premium. In a "regular" Mini I could put the SSD internal and use an external big drive, but would the external drive be fast enough via Firewire? Thanks in advance for any info.

  Read the article

• CPU clock scales down so computer is unusable after switching to battery

  - by Ryan

  When I am plugged in my laptop runs great however when I unplug it and I'm on battery power my CPU clock speed scales down pretty much all the way. I know this is happening by monitoring the clock speed. When plugged in it will usually stay between 1000MHz and 3000MHz but when I unplug it it quickly scales down to less than 500MHz and will get as low as 100MHz and it will NEVER scale up at all on battery power. After I plug the power back in it will then begin operating normally in about a minute. I have tried setting the MIN and MAX CPU performance in power options to 100% and have tried messing around with cooling settings which seemed to be a problem with HP laptops. I have a Toshiba Satellite M500-ST6444 running Windows 7. The BIOS is up to date. I have tried two versions.

  Read the article

• What type of security problems are mitigated by this .NET architecture?

  - by Jonno

  Given the following physical layout for a .NET web application: DB (sql server, windows) - No public route (no table access, only stored procs) Web Service DAL (iis, windows) - No public route (can be accessed by web server via port 80 and 443) Web Server (iis, windows) - Public route (only via port 80 and 443) What type(s) / examples of attack could be used to compromise the public web server but would be blocked by the Web Service DAL? i.e. can you think of concrete attack types that the DAL stops? Please note, I am interested only in the security aspect, not scaling / fault tolerance / performance / etc. In my mind if the web server has been compromised using an attack over port 80/443, then the same attack would work over port 80/443 to the Web Service DAL box.

  Read the article

• Graphic Setup tune-up checklist

  - by Click Ok

  I was trying to play the game Warzone 2100 and the games runs fine, with nice speed, but the screen stays with a horizontal lines "flickering"... My PC have a integrated GeForce Go 6100 vga. Ok, not a powerfull vga, but it's not the end of the world to run a "simple" game like this (compared with another games that ask you send your eyes to purchase a expensive vga). So, I think that the problem can be of the configuration of my machine. I use it in first instance for programming jobs, so I underpay attention to video setup. I would like about a checklist to know if my PC is "ready" to games. By example, I know that I need: Lastest vga drivers Updated DirectX and OpenGL What you suggest? There is too some good programs to test performance and suggests improvements in the system? Thank you! PS: I'm using Windows 7

  Read the article

• smartOS HPC config suggestion

  - by Andrew B.

  I'm configuring a brand new HPC server and am interested in using SmartOS because of it's virtualization control and zfs features. Does this configuration make sense for a SmartOS HPC, or would you recommend an alternative? System Specs: 2x 8-core xeon 384 GB RAM 30 TB HDs with 2x512GB SSDs Uses: - zfs for serving data to different vms, and over the network; 1 SSD for L2ARC and 1 for ZIL - typically 1-2 ubuntu instances running R and custom C/C++ code My biggest concerns as a newbie to SmartOS and ZFS are: (1) will I get near-metal performance from ubuntu running on SmartOS if it is the only active vm? (2) how do I serve data from the global zfs pool to the containers and other network devices?

  Read the article

• Why are there so few Wireless N Dual Band adapter PCI cards, only USB adapters instead?

  - by daiphoenix

  There has been several Wireless N Dual Band routers/APs out in the market for quite some time now, and there are several Wireless N Dual Band USB adapters out there. But as for PCI/PCI-X card adapters, there seems to be only one (the Linksys WMP600N). Why is that? I find it very strange. Is it because the USB adapters are easier to install, and can be used on multiple computers? But if so, why isn't it the same case with single band (2.4 Ghz) wireless N adapters? Because for these ones there as many PCI card adapters as there are USB adapters. Also, can the USB adapters, despite the lack of external antenna, offer the same level of performance as a card with external antennas?

  Read the article

• critical swap nagios

  - by Toby Joiner

  I installed nagios a very long time ago, and have started trying to use it now. I am getting this error: Current Status: CRITICAL (for 231d 16h 52m 49s) Status Information: SWAP CRITICAL - 100% free (0 MB out of 0 MB) Performance Data: swap=0MB;0;0;0;0 Current Attempt: 4/4 (HARD state) Last Check Time: 01-09-2011 13:26:34 Check Type: ACTIVE Check Latency / Duration: 0.125 / 0.004 seconds Next Scheduled Check: 01-09-2011 13:31:34 Last State Change: 05-22-2010 21:36:47 Last Notification: 01-09-2011 13:01:42 (notification 5521) Is This Service Flapping? NO (0.00% state change) In Scheduled Downtime? NO Last Update: 01-09-2011 13:29:32 ( 0d 0h 0m 4s ago) Is this normal? Should I be concerned? If more info is needed please let me know.

  Read the article

< Previous Page | 353 354 355 356 357 358 359 360 361 362 363 364  | Next Page >