Search Results

Search found 11318 results on 453 pages for 'josh close'.

Page 358/453 | < Previous Page | 354 355 356 357 358 359 360 361 362 363 364 365 | Next Page >

Upload using python script takes very long on one laptop as compared to another

- by Engr Am

I have a python 2.7 code which uses STORBINARY function for uploading files to an ftp server and RETRBINARY for downloading from this server. However, the issue is the upload is taking a very long time on three laptops from different brands as compared to a Dell laptop. The strange part is when I manually upload any file, it takes the same time on all the systems. The manual upload rate and upload rate with the python script is the same on the Dell Laptop. However, on every other brand of laptop (I have tried with IBM, Toshiba, Fujitsu-Siemens) the python script has a very low upload rate than the manual attempt. Also, on all these other laptops, the upload rate using the python script is the same (1Mbit/s) while the manual upload rate is approx. 8 Mbit/s. I have tried to vary the filesize for the upload to no avail. TCP Optimizer improved the download rate on all the systems but had no effect on the upload rate. Download rate using this script on all the systems is fine and same as the manual download rate. I have checked the server and it has more than 90% free space. The network connection is the same for all the laptops, and I try uploading only with one laptop at a time. All the laptops have almost the same system configurations, same operating system and approximately the same free drive space. If anything the Dell laptop is a little less in terms of processing power and RAM than 2 of the others, but I suppose this has no effect as I have checked many times to see how much was the CPU usage and network usage during these uploads and downloads, and I am sure that no other virus or program has been eating up my bandwidth. Here is the code ('ftp' and 'file_path' are inputs to the function): path,filename=os.path.split(file_path) filesize=os.path.getsize(file_path) deffilesize=(filesize/1024)/1024 f = open(file_path, "rb") upstart = time.clock() print ftp.storbinary("STOR "+filename, f) upende = time.clock()-upstart outname="Upload " f.close() return upende, deffilesize, outname

Read the article
Confused about UIView frame property

- by slowfungus

I'm building a prototype iPad app that draws diagrams. I have the following view hierarchy: UIView UIScrollView DiagramView : UIView TabBar NavigationBar And a UIViewController subclass holding all that together. Before drawing the diagram the first time I calculate the dimensions of the diagram, and set the DiagramView frame to that size, and the content size of the scrollview as well. -(void)recalculateBounds { [renderer diagram:diagram shouldDraw:NO]; SQXRect diagramRect = SQXMakeRect(0.0,0.0,[diagram bounds].size.width,[diagram bounds].size.height); self.frame = diagramRect; [(UIScrollView*)[self superview] setContentSize:diagramRect.size]; } I should disclose that the frame is being set to about 1500 x 3500 which i know is ridiculous. I just want to focus on some other parts of the app before I get into optimizing the render code. This works beautifully, except that the rect being passed to drawRect is not the size that I set, and my drawing is getting clipped at the bottom. Its close the size i set, but bigger in width, and shorter in height. Also of note, is the fact that if I force the frame to be much bigger than what I know the diagram needs, then the drawRect:rect is big enough, and no clipping occurs. Of course this has me wondering if the frame size needs to take into account some other screen real estate like the toolbars but my reading of the docs tells me the frame is in superview coordinates, which would be the scrollview so I reckon I need to worry about such things. Any idea what is causing this discrepancy?

Read the article
So many technologies to choose from. Where does the beginner start?

- by Sahat

WPF Silverlight Windows phone 7 w/ Silverlight iPhone OS w/ Objective-C Cocoa w/ Objective-C ASP.NET Android Facebook FBML HTML5 I will be graduating with B.S. in Computer Science soon and have to decide what do I want to learn from this list. I believe it's better to focus on one thing, master it and build up a portfolio to enhance my resume. Bachelor's Degree with no experience, no portfolio won't do me any good. It won't get me a job by itself. I need to have something that will greatly boost my resume. What would it be? iPhone development? ASP.NET web development? Facebook development? Or completely something else that I haven't listed? I understand it's natural for silverlight developers to say "Learn Silverlight", and iPhone developers say "Learn iPhone SDK and Objective-C". So please try to give a constructive, non-biased, non-objective opinion on which technology should I focus on. Please don't close the topic for "subjective/argumentative" reasons. I am just looking for some guidance.

Read the article
Rendering of graphics different depending on DisplayObject position

- by jedierikb

When drawing vertical lines with a non-integer x-value (e.g., 1.75) to a sprite, the lines are drawn differently based on the non-integer x-value of the sprite. In the picture below are two pairs of very close together vertical lines. As you can see, they look very different. This is frustrating, especially when animating the sprite. Any ideas how ensure that sprites-with-non-integer-positions' graphics will visually display the same way regardless of the sprite position? package { import flash.display.Sprite; import flash.display.StageAlign; import flash.display.StageScaleMode; import flash.events.Event; public class tmp extends Sprite { private var _sp1:Sprite; private var _sp2:Sprite; public function tmp( ):void { stage.align = StageAlign.TOP_LEFT; stage.scaleMode = StageScaleMode.NO_SCALE; _sp1 = new Sprite( ); drawButt( _sp1 ); _sp1.x = 100; _sp1.y = 100; _sp2 = new Sprite( ); drawButt( _sp2 ); _sp2.x = 100; _sp2.y = 200; addChild( _sp1 ); addChild( _sp2 ); addEventListener( Event.ENTER_FRAME, efCb, false, 0, true ); } private function efCb( evt:Event ):void { var nx:Number = _sp2.x + .1; if (nx > 400) { nx = 100; } _sp2.x = nx; } private function drawButt( sp:Sprite ):void { sp.graphics.clear( ); sp.graphics.lineStyle( 1, 0, 1, true ); sp.graphics.moveTo( 1, 1 ); sp.graphics.lineTo( 1, 100 ); sp.graphics.lineStyle( 1, 0, 1, true ); sp.graphics.moveTo( 1.75, 1 ); sp.graphics.lineTo( 1.75, 100 ); } } }

Read the article
Login problem with php

- by shinod

I want to prevent multiple log in with same log in credentials simultaneously. So I made a column login_status and set it to 1 when some one logging in and change to 0 when logging out besides I set session after successful logged in. If user won't click on log out(in case of user close tab or because of some network problem) it doesn't update database and then one can't use that log in credentials again. So I use a ajax call to set current time stamp in database with related log in credentials and it is updated in each 2 minutes if user not navigate from that page. Then if some one attempts to log in with same log in credentials, it will check these time stamp if column login_status is 1, then if the time stamp is older than 3 minutes it allows the log in.Then it solving that problem. But the new problem is if user closes the tab or browser window and after 3 minutes one can log in with same log in credentials from somewhere and if the previous user open that page automatically it will log in as session is already set. How can I prevent this.

Read the article
Sample twitter application

- by Jack

I have installed WAMP and running PHP scripts on localhost. I have enabled cURL. Here is my code. <?php function updateTwitter($status) { // Twitter login information $username = 'xxxxx'; $password = 'xxxxx'; // The url of the update function $url = 'http://twitter.com/statuses/update.xml'; // Arguments we are posting to Twitter $postargs = 'status='.urlencode($status); // Will store the response we get from Twitter $responseInfo=array(); // Initialize CURL $ch = curl_init($url); // Tell CURL we are doing a POST curl_setopt($ch, CURLOPT_PROXY,"localhost:80"); curl_setopt ($ch, CURLOPT_POST, true); // Give CURL the arguments in the POST curl_setopt ($ch, CURLOPT_POSTFIELDS, $postargs); // Set the username and password in the CURL call curl_setopt($ch, CURLOPT_USERPWD, $username.':'.$password); // Set some cur flags (not too important) curl_setopt($ch, CURLOPT_VERBOSE, 1); curl_setopt($ch, CURLOPT_NOBODY, 0); curl_setopt($ch, CURLOPT_HEADER, 0); curl_setopt($ch, CURLOPT_FOLLOWLOCATION,1); curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1); // execute the CURL call $response = curl_exec($ch); if($response === false) { echo 'Curl error: ' . curl_error($ch); } else { echo 'Operation completed without any errors<br/>'; } // Get information about the response $responseInfo=curl_getinfo($ch); // Close the CURL connection curl_close($ch); // Make sure we received a response from Twitter if(intval($responseInfo['http_code'])==200){ // Display the response from Twitter echo $response; }else{ // Something went wrong echo "Error: " . $responseInfo['http_code']; } curl_close($ch); } updateTwitter("Just finished a sweet tutorial on http://brandontreb.com"); ?> Here's my output Operation completed without any errors Error: 404 Here's what error 404 means 404 Not Found: The URI requested is invalid or the resource requested, such as a user, does not exists. Please help.

Read the article
WCF REST adding data using POST or PUT 400 Bad Request

- by user55474

HI How do i add data using wcf rest architecture. I dont want to use the channelfactory to call my method. Something similar to the webrequest and webresponse used for GET. Something similar to the ajax WebServiceProxy restInvoke Or do i always have to use the Webchannelfactory implementation I am getting a 400 BAD request by using the following Dim url As String = "http://localhost:4475/Service.svc/Entity/Add" Dim req As WebRequest = WebRequest.Create(url) req.Method = "POST" req.ContentType = "application/xml; charset=utf-8" req.Timeout = 30000 req.Headers.Add("SOAPAction", url) Dim xEle As XElement xEle = <Entity xmlns:i="http://www.w3.org/2001/XMLSchema-instance"> <Name>Entity1</Name> </Entity> Dim sXML As String = xEle .Value req.ContentLength = sXML.Length Dim sw As New System.IO.StreamWriter(req.GetRequestStream()) sw.Write(sXML) sw.Close() Dim res as HttpWebResponse = req.GetResponse() Sercice Contract is as follows <OperationContract()> _ <WebInvoke(Method:="PUT", UriTemplate:="Entity/Add")> _ Function AddEntity(ByVal e1 As Entity) DataContract is as follows <Serializable()> _ <DataContract()> _ Public Class Entity private m_Name as String <DataMember()> _ Public Property Name() As String Get Return m_Name End Get Set(ByVal value As String) m_Name = value End Set End Property End Class thanks

Read the article
Insert array to mysql database php

- by ganjan

Hi. I want to add an array to my db. I have set up a function that checks if a value in the db (ex. health and money) has changed. If the value is diffrent from the original I add the new value to the $db array. Like this $db['money'] = $money_input + $money_db;. function modify_user_info($conn, $money_input, $health_input){ (...) if ($result = $conn->query($query)) { while ($user = $result->fetch_assoc()) { $money_db = $user["money"]; $health_db = $user["health"]; } $result->close(); //lag array til db med kolonnene som skal fylles ut som keys i array if ($user["money"] != $money_input){ $db['money'] = $money_input + $money_db; //0 - 20 if (!preg_match("/^[[0-9]{0,20}$/i", $db['money'])){ echo "error"; return false; } } if ($user["health"] != $health_input){ $db['health'] = $health_input + $health_db; //0 - 4 if (!preg_match("/^[[0-9]{0,4}$/i", $db['health'])){ echo "error"; return false; } if (($db['health'] < 1) or ($db['health'] > 1000)) { echo "error"; return false; } } The keys in $db represent colums in my database. Now I want to make a function that takes the keys in the array $db and insert them in the db. Something like this ? $query = "INSERT INTO `main_log` ( `id` , "; foreach(range(0, x) as $num) { $query .= array_key.", "; } $query = substr($query, 0, -3); $query .= " VALUES ('', "; foreach(range(0, x) as $num) { $query .= array_value.", "; } $query = substr($query, 0, -3); $query .= ")";

Read the article
Apply PHP regex replace on a multi-line repeted pattern

- by Hussain

Let's say I have this input: I can haz a listz0rs! # 42 # 126 I can haz another list plox? # Hello, world! # Welcome! I want to split it so that each set of hash-started lines becomes a list: I can haz a listz0rs! <ul> <li>42</li> <li>126</li> </ul> I can haz another list plox? <ul> <li>Hello, world!</li> <li>Welcome!</li> </ul> If I run the input against the regex "/(?:(?:(?<=^# )(.*)$)+)/m", I get the following result: Array ( [0] => Array ( [0] => 42 ) Array ( [0] => 126 ) Array ( [0] => Hello, world! ) Array ( [0] => Welcome! ) ) This is fine and dandy, but it doesn't distinguish between the two different lists. I need a way to either make the quantifier return a concatenated string of all the occurrences, or, ideally, an array of all the occurrences. Idealy, this should be my output: Array ( [0] = Array ( [0] = 42 [1] = 126 ) Array ( [0] = Hello, world! [1] = Welcome! ) ) Is there any way of achieving this, and if not, is there a close alternative? Thanks in advance!

Read the article
Reading/Writing DataTables to and from an OleDb Database LINQ

- by jsmith

My current project is to take information from an OleDbDatabase and .CSV files and place it all into a larger OleDbDatabase. I have currently read in all the information I need from both .CSV files, and the OleDbDatabase into DataTables.... Where it is getting hairy is writing all of the information back to another OleDbDatabase. Right now my current method is to do something like this: OleDbTransaction myTransaction = null; try { OleDbConnection conn = new OleDbConnection("PROVIDER=Microsoft.Jet.OLEDB.4.0;" + "Data Source=" + Database); conn.Open(); OleDbCommand command = conn.CreateCommand(); string strSQL; command.Transaction = myTransaction; strSQL = "Insert into TABLE " + "(FirstName, LastName) values ('" + FirstName + "', '" + LastName + "')"; command.CommandType = CommandType.Text; command.CommandText = strSQL; command.ExecuteNonQuery(); conn.close(); catch (Exception) { // IF invalid data is entered, rolls back the database myTransaction.Rollback(); } Of course, this is very basic and I'm using an SQL command to commit my transactions to a connection. My problem is I could do this, but I have about 200 fields that need inserted over several tables. I'm willing to do the leg work if that's the only way to go. But I feel like there is an easier method. Is there anything in LINQ that could help me out with this?

Read the article
C# async callback on disposed form

- by Rodney Burton

Quick question: One of my forms in my winform app (c#) makes an async call to a WCF service to get some data. If the form happens to close before the callback happens, it crashes with an error about accessing a disposed object. What's the correct way to check/handle this situation? The error happens on the Invoke call to the method to update my form, but I can't drill down to the inner exception because it says the code has been optimized. The Code: public void RequestUserPhoto(int userID) { WCF.Service.BeginGetUserPhoto(userID, new AsyncCallback(GetUserPhotoCB), userID); } public void GetUserPhotoCB(IAsyncResult result) { var photo = WCF.Service.EndGetUserPhoto(result); int userID = (int)result.AsyncState; UpdateUserPhoto(userID, photo); } public delegate void UpdateUserPhotoDelegate(int userID, Binary photo); public void UpdateUserPhoto(int userID, Binary photo) { if (InvokeRequired) { var d = new UpdateUserPhotoDelegate(UpdateUserPhoto); Invoke(d, new object[] { userID, photo }); } else { if (photo != null) { var ms = new MemoryStream(photo.ToArray()); var bmp = new System.Drawing.Bitmap(ms); if (userID == theForm.AuthUserID) { pbMyPhoto.BackgroundImage = bmp; } else { pbPhoto.BackgroundImage = bmp; } } } }

Read the article
Getting registry information using Python

- by Willy

I am trying to pull registry info from many servers and put them all into one txt file. I got the code working fine in a .bat file. I hear that there is a way simpler way to do this in Python. I am intrigued and delighted to hear this. Can anyone help finish my code: My working bat file: echo rfsqlcl01app >> foo.txt reg query "\\rfsqlcl01app\HKEY_LOCAL_MACHINE\SOFTWARE\Network Associates\TVD\Shared Components\On Access Scanner\McShield\Configuration\Default" >> foo.txt echo GLADGSQL01 >> foo.txt reg query "\\GLADGSQL01\HKEY_LOCAL_MACHINE\SOFTWARE\Network Associates\TVD\Shared Components\On Access Scanner\McShield\Configuration\Default" >> foo.txt echo GLADGWEB01 >> foo.txt reg query "\\GLADGWEB01\HKEY_LOCAL_MACHINE\SOFTWARE\Network Associates\TVD\Shared Components\On Access Scanner\McShield\Configuration\Default" >> foo.txt echo PAPERVISION >> foo.txt My python code structure: >>> server_list = open('server_test.txt', 'r') >>> for line in server_list: print r'reg query \\%s\blah\blah\blah' % line.strip() reg query \\foo\blah\blah\blah reg query \\moo\blah\blah\blah reg query \\boo\blah\blah\blah >>> server_list.close()

Read the article
wcf class implementing multiple service contracts

- by Archie

Hello, I have a class TestService which implements two service contracts called IService1 and IService2. But I'm facing a difficulty in implementation. My Code looks as follows: Uri baseAddress = new Uri("http://localhost:8000/ServiceModel/Service"); Uri baseAddress1 = new Uri("http://localhost:8080/ServiceModel/Service1"); ServiceHost selfHost = new ServiceHost(typeof(TestService)); selfHost.AddServiceEndpoint(typeof(IService1), new WSHttpBinding(), baseAddress); selfHost.AddServiceEndpoint(typeof(IService2), new WSHttpBinding(), baseAddress1); ServiceMetadataBehavior smb = new ServiceMetadataBehavior(); smb.HttpGetEnabled = true; selfHost.Description.Behaviors.Add(smb); selfHost.Open(); Console.WriteLine("The service is ready."); Console.WriteLine("Press <ENTER> to terminate service."); Console.WriteLine(); Console.ReadLine(); selfHost.Close(); I'm getting a run time error as: The HttpGetEnabled property of ServiceMetadataBehavior is set to true and the HttpGetUrl property is a relative address, but there is no http base address. Either supply an http base address or set HttpGetUrl to an absolute address. What shall i do about it? Do I realy need two separate endpoints? Thanks.

Read the article
Some clarification needed about synchronous versus asynchronous asio operations

- by Old newbie

As far as I know, the main difference between synchronous and asynchronous operations. I.e. write() or read() vs async_write() and async_read() is that the former, don't return until the operation finish -or error-, and the last ones, returns inmediately. Due the fact that the asynchronous operations are controlled by an io_service.run() that does not finish until the controlled operations has finalized. It seems to me that in sequencial operations as those involved in TCP/IP connections with protocols such as POP3, in which the operaton is a sequence such as: C: <connect> S: Ok. C: User... S: Ok. C: Password S: Ok. C: Command S: answer C: Command S: answer ... C: bye S: <close> The difference between synchronous/asynchronous opperatons does not make much sense. Of course, in both operations there is allways the risk that the program flow stops indefinitely by some circunstance -there the use of timers-, but I would like know some more authorized opinions in this matter. I must admit that the question is rather ill-defined, but I like hear some advices about when use one or other, because I've problems in debugging with MS Visual Studio, asynchronous SSL operations in a POP3 client in wich I'm working now -about some of who surely I would write here soon-, and sometimes think that perhaps is a bad idea use asynchronous in this. Not to say that I'm an absolute newbie with this librarys, that additionally to the difficult with the idioma, and some obscure concepts in the STL, must suffer the brevity of the asio documentation.

Read the article
PropertyPlaceholderConfigurer vs Filters -- Spring Beans

- by John

Hi there. I've got a question regarding the difference between PropertyPlaceholderConfigurer (org.springframework.beans.factory.config.PropertyPlaceholderConfigurer) and normal filters defined in my pom.xml. I've been looking at examples, and it seems that even though filters are defined and marked to be active by default in the pom.xml they still make use of PropertyPlaceholderConfigurer in Spring's applicationContext.xml. This means that the pom.xml has a reference to a filter-LOCAL.properties while applicationContext.xml has a reference to application.properties and they both contain the same settings. Why is that? Is that how it is supposed to be done? I'm able to run the goal mvn jetty:run without the application.properties present, but if I add settings to the application.properties that differ from the filter-LOCAL.properties they don't seem to override. Here's an example of what I mean: pom.xml <profiles <profile <idLOCAL <activation <activeByDefaulttrue </activation <properties <envLOCAL </properties </profile </profiles applicationContext.xml <bean id="propertyConfigurer" class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer" <property name="locations" <list <valueclasspath:application.properties </list </property <property name="ignoreResourceNotFound" value="true"/ </bean <bean id="dataSource" class="org.apache.commons.dbcp.BasicDataSource" destroy-method="close" <property name="driverClassName" value="${jdbc.driver}"/ <property name="url" value="${jdbc.url}"/ <property name="username" value="${jdbc.username}"/ <property name="password" value="${jdbc.password}"/ </bean an example of the content of application.properties and filters-LOCAL.properties jdbc.driver=org.postgresql.Driver jdbc.url=jdbc:postgresql://localhost/shoutbox_dev jdbc.username=tester jdbc.password=tester Can I remove the propertyConfigurer from the applicationContext, create a PROD filter and disregard the application.properties file, or will that give me issues when deploying to the production server?

Read the article
Regular input in ASP.NET

- by coffeeaddict

Here's an example of a regular standard HTML input for my radiobuttonlist: <label><input type="radio" name="rbRSelectionGroup" checked value="0" />None</label> <asp:Repeater ID="rptRsOptions" runat="server"> <ItemTemplate> <div> <label><input type="radio" name="rbRSelectionGroup" value='<%# ((RItem)Container.DataItem).Id %>' /><%# ((RItem)Container.DataItem).Name %></label> </div> </ItemTemplate> </asp:Repeater> I removed some stuff for this thread, one being I put an r for some name that I do not want to expose here so just an fyi. Now, I would assume that this would or should happen: Page loads the first time, the None radio button is checked / defaulted I go and select a different radiobutton in this radiobutton list I do an F5 refresh in my browser The None radio button is pre-selected again after it has come back from the refresh but #4 is not happening. It's retaining the radiobutton that I selected in #2 and I don't know why. I mean in regular HTML it's stateless. So what could be holding this value? I want this to act like a normal input button. I know the question of "why not use an ASP.NET control" will come up. Well there are 2 reasons: The stupid radiobuttonlist bug that everyone knows about I just want to brush up more on standard input tags We are not moving to MVC so this is as close as I'll get and it's ok, because the rest of the team is on par with having mixed ASP.NET controls with standard HTML controls in our pages Anyway my main question here is I'm surprised that it's retaining the change in selection after postback.

Read the article
Lucene setboost doesn't work

- by Keven

Hi all, OUr team just upgrade lucene from 2.3 to 3.0 and we are confused about the setboost and getboost of document. What we want is just set a boost for each document when add them into index, then when search it the documents in the response should have different order according to the boost I set. But it seems the order is not changed at all, even the boost of each document in the search response is still 1.0. Could some one give me some hit? Following is our code: String[] a = new String[] { "schindler", "spielberg", "shawshank", "solace", "sorcerer", "stone", "soap", "salesman", "save" }; List strings = Arrays.asList(a); AutoCompleteIndex index = new Index(); IndexWriter writer = new IndexWriter(index.getDirectory(), AnalyzerFactory.createAnalyzer("en_US"), true, MaxFieldLength.LIMITED); float i = 1f; for (String string : strings) { Document doc = new Document(); Field f = new Field(AutoCompleteIndexFactory.QUERYTEXTFIELD, string, Field.Store.YES, Field.Index.NOT_ANALYZED); doc.setBoost(i); doc.add(f); writer.addDocument(doc); i += 2f; } writer.close(); IndexReader reader2 = IndexReader.open(index.getDirectory()); for (int j = 0; j < reader2.maxDoc(); j++) { if (reader2.isDeleted(j)) { continue; } Document doc = reader2.document(j); Field f = doc.getField(AutoCompleteIndexFactory.QUERYTEXTFIELD); System.out.println(f.stringValue() + ":" + f.getBoost() + ", docBoost:" + doc.getBoost()); doc.setBoost(j); }

Read the article
ADO.NET Multiple simultaneous reads from an open database.

- by Deverill

Answer not needed - my logic was wrong and this question is invalid. Charles helped me see where I went off-tracks. Thanks I have a utility that moves data from one source to another. In the process of writing the record I check to see if it exists and do an update/insert as necessary. The difficulty I have is that as I'm writing the main record info there is a 2nd table for "custom data" that I have to check to see if it exists and do an update/insert for that as well. Example: I may be loading a pencil sharpener that may or may not exist. While I'm writing it into destination it has characteristics such as style, color, etc. and each of them may or may not exist. As written I seem to need to have 2 DataReaders open, one for the sharpener and one to check for and update color. I am new to ADO.NET, but not to programming and it's more complicated than I listed but for sanity's sake I didn't put all the details. My question is: What am I missing? You can't have 2 readers open at the same time on a connection, yet I can't close the first if I'm stepping through all products. It seems inefficient to have 2 connections, readers, etc. for this. Is there a feature of ADO.NET DBs that I'm missing? How would you do it? Thanks!

Read the article
Android Compass orientation on unreliable (Low pass filter)

- by madsleejensen

Hi all Im creating an application where i need to position a ImageView depending on the Orientation of the device. I use the values from a MagneticField and Accelerometer Sensors to calculate the device orientation with SensorManager.getRotationMatrix(rotationMatrix, null, accelerometerValues, magneticFieldValues) SensorManager.getOrientation(rotationMatrix, values); double degrees = Math.toDegrees(values[0]); My problem is that the positioning of the ImageView is very sensitive to changes in the orientation. Making the imageview constantly jumping around the screen. (because the degrees change) I read that this can be because my device is close to things that can affect the magneticfield readings. But this is not the only reason it seems. I tried downloading some applications and found that the "3D compass" application remains extremely steady in its readings, i would like the same behavior in my application. I read that i can tweak the "noise" of my readings by adding a "Low pass filter", but i have no idea how to implement this (because of my lack of Math). Im hoping someone can help me creating a more steady reading on my device, Where a little movement to the device wont affect the current orientation. Right now i do a small if (Math.abs(lastReadingDegrees - newReadingDegrees) > 1) { updatePosition() } To filter abit of the noise. But its not working very well :)

Read the article
Good tools for keeping the content in test/staging/live environments synchronized

- by David Stratton

I'm looking for recommendations on automated folder synchronization tools to keep the content in our three environments synchronized automatically. Specifically, we have several applications where a user can upload content (via a File Upload page or a similar mechanism), such as images, pdf files, word documents, etc. In the past, we had the user doing this to our live server, and as a result, our test and staging servers had to be manually synchronized. Going forward, we will have them upload content to the staging server, and we would like some software to automatically copy the files off to the test and live servers EITHER on a scheduled basis OR as the files get uploaded. I was planning on writing my own component, and either set it up as a scheduled task, or use a FileSystemWatcher, but it occurred to me that this has probably already been done, and I might be better off with some sort of synchronization tool that already exists. On our web site, there are a limited number of folders that we want to keep synchronized. In these folders, it is an all or nothing - we want to make sure the folders are EXACT duplicates. This should make it fairly straightforward, and I would think that any software that can synchronize folders would be OK, except that we also would like the software to log changes. (This rules out simple BATCH files.) So I'm curious, if you have a similar environment, how did you solve the challenge of keeping everything synchronized. Are you aware of a tool that is reliable, and will meet our needs? If not, do you have a recommendation for something that will come close, or better yet, an open source solution where we can get the code and modify it as needed? (preferably .NET). Added Also, I DID google this first, but there are so many options, I am interested mostly in knowing what actually works well vs what they SAY works, which is why I'm asking here.

Read the article
How do I change the base class at runtime in C#?

- by MatthewMartin

I may be working on mission impossible here, but I seem to be getting close. I want to extend a ASP.NET control, and I want my code to be unit testable. Also, I'd like to be able to fake behaviors of a real Label (namely things like ID generation, etc), which a real Label can't do in an nUnit host. Here a working example that makes assertions on something that depends on a real base class and something that doesn't-- in a more realistic unit test, the test would depend on both --i.e. an ID existing and some custom behavior. Anyhow the code says it better than I can: public class LabelWrapper : Label //Runtime //public class LabelWrapper : FakeLabel //Unit Test time { private readonly LabelLogic logic= new LabelLogic(); public override string Text { get { return logic.ProcessGetText(base.Text); } set { base.Text=logic.ProcessSetText(value); } } } //Ugh, now I have to test FakeLabelWrapper public class FakeLabelWrapper : FakeLabel //Unit Test time { private readonly LabelLogic logic= new LabelLogic(); public override string Text { get { return logic.ProcessGetText(base.Text); } set { base.Text=logic.ProcessSetText(value); } } } [TestFixture] public class UnitTest { [Test] public void Test() { //Wish this was LabelWrapper label = new LabelWrapper(new FakeBase()) LabelWrapper label = new LabelWrapper(); //FakeLabelWrapper label = new FakeLabelWrapper(); label.Text = "ToUpper"; Assert.AreEqual("TOUPPER",label.Text); StringWriter stringWriter = new StringWriter(); HtmlTextWriter writer = new HtmlTextWriter(stringWriter); label.RenderControl(writer); Assert.AreEqual(1,label.ID); Assert.AreEqual("<span>TOUPPER</span>", stringWriter.ToString()); } } public class FakeLabel { virtual public string Text { get; set; } public void RenderControl(TextWriter writer) { writer.Write("<span>" + Text + "</span>"); } } //System Under Test internal class LabelLogic { internal string ProcessGetText(string value) { return value.ToUpper(); } internal string ProcessSetText(string value) { return value.ToUpper(); } }

Read the article
Help with PHP simplehtmldom - Modifiying a form.

- by onemyndseye

Ive gotten some great help here and I am so close to solving my problem that I can taste it. But I seem to be stuck. I need to scrape a simple form from a local webserver and only return the lines that match a users local email (i.e. onemyndseye@localhost). simplehtmldom makes easy work of extracting the correct form element: foreach($html->find('form[action*="delete"]') as $form) echo $form; Returns: <form action="/delete" method="post"> <input type="checkbox" id="D1" name="D1" /><a href="http://www.linux.com/rss/feeds.php"> http://www.linux.com/rss/feeds.php </a> [email: onemyndseye@localhost (Default) ]<br /> <input type="checkbox" id="D2" name="D2" /><a href="http://www.ubuntu.com/rss.xml"> http://www.ubuntu.com/rss.xml </a> [email: onemyndseye@localhost (Default) ]<br /> However I am having trouble making the next step. Which is returning lines that contain 'onemyndseye@localhost' and removing it so that only the following is returned: <input type="checkbox" id="D1" name="D1" /><a href="http://www.linux.com/rss/feeds.php">http://www.linux.com/rss/feeds.php</a> <br /> <input type="checkbox" id="D2" name="D2" /><a href="http://www.ubuntu.com/rss.xml">http://www.ubuntu.com/rss.xml</a> <br /> Thanks to the wonderful users of this site Ive gotten this far and can even return just the links but I am having trouble getting the rest... Its important that the complete <input> tags are returned EXACTLY as shown above as the id and name values will need to be passed back to the original form in post data later on. Thanks in advance!

Read the article
Closing InfoWindow with Google Maps API V3

- by Oscar Godson

I've seen the other posts, but they dont have the markers being looped through dynamically like mine. How do I create an event that will close the infowindow when another marker is clicked on using the following code? $(function(){ var latlng = new google.maps.LatLng(45.522015,-122.683811); var settings = { zoom: 10, center: latlng, disableDefaultUI:false, mapTypeId: google.maps.MapTypeId.SATELLITE }; var map = new google.maps.Map(document.getElementById("map_canvas"), settings); $.getJSON('api',function(json){ for (var property in json) { if (json.hasOwnProperty(property)) { var json_data = json[property]; var the_marker = new google.maps.Marker({ title:json_data.item.headline, map:map, clickable:true, position:new google.maps.LatLng( parseFloat(json_data.item.geoarray[0].latitude), parseFloat(json_data.item.geoarray[0].longitude) ) }); function buildHandler(map, marker, content) { return function() { var infowindow = new google.maps.InfoWindow({ content: '<div class="marker"><h1>'+content.headline+'</h1><p>'+content.full_content+'</p></div>' }); infowindow.open(map, marker); }; } new google.maps.event.addListener(the_marker, 'click',buildHandler(map, the_marker, {'headline':json_data.item.headline,'full_content':json_data.item.full_content})); } } }); });

Read the article
Why does this MySQL function return null?

- by Shore

Description: the query actually run have 4 results returned,as can be see from below, what I did is just concate the items then return, but unexpectedly,it's null. I think the code is self-explanatory: DELIMITER | DROP FUNCTION IF EXISTS get_idiscussion_ask| CREATE FUNCTION get_idiscussion_ask(iask_id INT UNSIGNED) RETURNS TEXT DETERMINISTIC BEGIN DECLARE done INT DEFAULT 0; DECLARE body varchar(600); DECLARE created DATETIME; DECLARE anonymous TINYINT(1); DECLARE screen_name varchar(64); DECLARE result TEXT; DECLARE cur1 CURSOR FOR SELECT body,created,anonymous,screen_name from idiscussion left join users on idiscussion.uid=users.id where idiscussion.iask_id=iask_id; DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1; SET result = ''; OPEN cur1; REPEAT FETCH cur1 INTO body, created, anonymous, screen_name; SET result = CONCAT(result,'<comment><body><![CDATA[',body,']]></body>','<replier>',if(screen_name is not null and !anonymous,screen_name,''),'</replier>','<created>',created,'</created></comment>'); UNTIL done END REPEAT; CLOSE cur1; RETURN result; END | DELIMITER ; mysql> DELIMITER ; mysql> select get_idiscussion_ask(1); +------------------------+ | get_idiscussion_ask(1) | +------------------------+ | NULL | +------------------------+ 1 row in set (0.01 sec) mysql> SELECT body,created,anonymous,screen_name from idiscussion left join users on idiscussion.uid=users.id where idiscussion.iask_id=1; +------+---------------------+-----------+-------------+ | body | created | anonymous | screen_name | +------+---------------------+-----------+-------------+ | haha | 2009-05-27 04:57:51 | 0 | NULL | | haha | 2009-05-27 04:57:52 | 0 | NULL | | haha | 2009-05-27 04:57:52 | 0 | NULL | | haha | 2009-05-27 04:57:53 | 0 | NULL | +------+---------------------+-----------+-------------+ 4 rows in set (0.00 sec) For those who don't think the code is self-explanatory: Why the function returns NULL?

Read the article
C++ destructos causing crash's

- by larsonator

ok, so i got a some what intricate program that simulates the uni systems of students, units, and students enrolling in units. Students are stored in a binary search tree, Units are stored in a standard list. Student has a list of Unit Pointers, to store which units he/she is enrolled in Unit has a list of Student pointers, to store students which are enrolled in that unit. The unit collections (storing units in a list) as made as a static variable where the main function is, as is the Binary search tree of students. when its finaly time to close the program, i call the destructors of each. but at some stage, during the destructors on the unit side, Unhandled exception at 0x002e4200 in ClassAllocation.exe: 0xC0000005: Access violation reading location 0x00000000. UnitCollection destructor: UnitCol::~UnitCol() { list<Unit>::iterator itr; for(itr = UnitCollection.begin(); itr != UnitCollection.end();) { UnitCollection.pop_front(); itr = UnitCollection.begin(); } } Unit Destructor Unit::~Unit() { } now i got the same sorta problem on the student side of things BST destructors void StudentCol::Destructor(const BTreeNode * r) { if(r!= 0) { Destructor(r->getLChild()); Destructor(r->getRChild()); delete r; } } StudentCol::~StudentCol() { Destructor(root); } Student Destructor Student::~Student() { } so yeah any help would be greatly appreciated

Read the article

< Previous Page | 354 355 356 357 358 359 360 361 362 363 364 365 | Next Page >