Search Results

Search found 15923 results on 637 pages for 'static reflection'.

Page 358/637 | < Previous Page | 354 355 356 357 358 359 360 361 362 363 364 365  | Next Page >

• USB Device first mounted as root, then by user

  - by Petr Marek

  When I connect my Kindle, it shows up as an usb0 media, which I can read but not write (owner = root). However, if I do sudo umount /media/usb0, usb0 gets unmounted and a Kindle media gets mounted properly (is writable etc.). What can cause such strange behavior? It's not only with Kindle, but with Flash drives etc. as well. My /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda2 during installation UUID=595815c2-d882-4ec8-a2cd-cce70471167c / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda6 during installation #UUID=1340a336-66ca-4743-a6e4-41a307af2dda /boot ext4 defaults 0 3 # swap was on /dev/sda5 during installation UUID=afa49f1d-d505-4166-82a2-2f44548a48c6 none swap sw 0 0 UUID=deb86039-528a-45f3-b5f9-ce528740c94e /data_hdd ext4 defaults 0 2 My groups: petr@sova:~$ groups petr petr : petr adm cdrom sudo dip plugdev fuse lpadmin sambashare bumblebee

  Read the article

• 3CX behind UT7.1 using a callcentric.com SIP account

  - by Corey

  Has anyone had any luck with getting 3CX working behind UT7.1 with a SIP account from callcentric.com? I am willing to reset my current UT box back to defaults, and start from there. I have a static public IP assigned to the external interface. My internal addressing is 192.168.76.0 . My 3CX box has 192.168.76.17 . Would anyone be willing to give me a step by step of changes to make in UT / 3CX. I currently have my UT box unplugged, and have replaced it with a Linksys unit. I have port forwarding setup for… TCP/UDP 5060 to 192.168.76.17 UDP 9000-9049 to 192.168.76.17 … and everything works great. I also have additional external IPs available if that helps.

  Read the article

• Coarse Collision Detection in highly dynamic environment

  - by Millianz

  I'm currently working a 3D space game with A LOT of dynamic objects that are all moving (there is pretty much no static environment). I have the collision detection and resolution working just fine, but I am now trying to optimize the collision detection (which is currently O(N^2) -- linear search). I thought about multiple options, a bounding volume hierarchy, a Binary Spatial Partitioning tree, an Octree or a Grid. I however need some help with deciding what's best for my situation. A grid seems unfeasible simply due to the space requirements and cache coherence problems. Since everything is so dynamic however, it seems to be that trees aren't ideal either, since they would have to be completely rebuilt every frame. I must admit I never implemented a physics engine that required spatial partitioning, do I indeed need to rebuild the tree every frame (assuming that everything is constantly moving) or can I update the trees after integrating? Advice is much appreciated - to give some more background: You're flying a space ship in an asteroid field, and there are lots and lots of asteroids and some enemy ships, all of which shoot bullets. EDIT: I came across the "Sweep an Prune" algorithm, which seems like the right thing for my purposes. It appears like the right mixture of fast building of the data structures involved and detailed enough partitioning. This is the best resource I can find: http://www.codercorner.com/SAP.pdf If anyone has any suggestions whether or not I'm going in the right direction, please let me know.

  Read the article

• How to make IIS7 stop adding etag to response headers?

  - by user20028

  For performance reasons, I'm using expire headers for static files (adding long expiration periods like 50 years or so). Now I'm trying to get rid of etag headers which are automatically added by IIS7. I've done some searching but it seems harder than what I thought (there doesn't seem to be a straight forward way). I found some workarounds but they all use httpmodules (which I'm keeping as a last resort). I strongly prefer to not get the etag header added in the first place. Did anyone manage to do this? Thanks

  Read the article

• How I use RegExp in my Java program? [migrated]

  - by MIH1406

  I have the following string examples: 00001 1 12 123 00002 3 7 321 00003 99 23 332 00004 192 50 912 In a separate text file. Numbers are separated by tabs not spaces. I tried to read the file and print each line if it matches a given RegExp, but I could not find the suitable RegExp for these lines. private static void readFile() { String fileName = "processes.lst"; FileReader file = null; String result = ""; try { file = new FileReader(fileName); BufferedReader reader = new BufferedReader(file); String line = null; String regEx = "[0-9]\t[0-9]\t[0-9]\t[0-9]"; while((line = reader.readLine()) != null) { if(line.matches(regEx)) { result += "\n" + line; } } } catch(Exception e) { System.out.println(e.getMessage()); } finally { if(file != null) try { file.close(); } catch(Exception e) { System.out.println(e.getMessage()); } } System.out.println(result); } I ended up without any string being printed!!

  Read the article

• Commercial version of Freenet6

  - by grnbeagle

  I've been using Freenet6 from gogoNET to make my mobile device publicly accessible via IPv6. It works quite well except that the service is not as stable because it's non-commercial usage only as their servers are hosted for free by different operators around the world. Apparently gogoNET sells hardware called gogoSERVER which allows one to build a service similar to Freenet6. I've inquired their sales team, but they were unable to tell me which companies have a commercial, production-quality implementation of Freenet6. Specifically I'm looking for the following features in IPv6 service provider: Client-based IPv6 connectivity for mobile devices: gogoCLIENT (gw6c) is ideal for mobile devices since it allows a device to go online regardless of the device's location. API for account maintenance: so that we can create device accounts from our software Static IPv6 address: (or maybe I mean IPv4 address) by this I mean, just like gogoNET6 service (username.broker.freenet6.net), we want to provide our users with a permanent URL for their device Any info on commercial IPv6 service provider utilizing gogoSERVER is appreciated. Thanks.

  Read the article

• Mercurial mirror: abort: No such file or directory: http://[...]/00manifest.i

  - by Sridhar Ratnakumar

  I am trying to setup a daily mirror of a mercurial repository - code.python.org in particular - within our local network, and serve that via Apache HTTPD. On the remote host that hosts apache, I did this: $ cd /var/www $ hg clone http://code.python.org/hg/trunk/ On my macbook, I ran: $ hg -v clone http://remote/trunk/ (falling back to static-http) abort: No such file or directory: http://remote/trunk/.hg/store/00manifest.i Google does not show any relevant result for this particular error. I remember back in those days being able to setup Bazaar mirrors by a simple clone. Doesn't Mercurial work like that? How do I setup a mirror that must further act like a clone URL?

  Read the article

• Refactoring Part 1 : Intuitive Investments

  - by Wes McClure

  Fear, it’s what turns maintaining applications into a nightmare.  Technology moves on, teams move on, someone is left to operate the application, what was green is now perceived brown.  Eventually the business will evolve and changes will need to be made.  The approach to those changes often dictates the long term viability of the application.  Fear of change, lack of passion and a lack of interest in understanding the domain often leads to a paranoia to do anything that doesn’t involve duct tape and bailing twine.  Don’t get me wrong, those have a place in the short term viability of a project but they don’t have a place in the long term.  Add to it “us versus them” in regards to the original team and those that maintain it, internal politics and other factors and you have a recipe for disaster.  This results in code that quickly becomes unmanageable.  Even the most clever of designs will eventually become sub optimal and debt will amount that exponentially makes changes difficult.  This is where refactoring comes in, and it’s something I’m very passionate about.  Refactoring is about improving the process whereby we make change, it’s an exponential investment in the process of change. Without it we will incur exponential complexity that halts productivity. Investments, especially in the long term, require intuition and reflection.  How can we tackle new development effectively via evolving the original design and paying off debt that has been incurred? The longer we wait to ask and answer this question, the more it will cost us.  Small requests don’t warrant big changes, but realizing when changes now will pay off in the long term, and especially in the short term, is valuable. I have done my fair share of maintaining applications and continuously refactoring as needed, but recently I’ve begun work on a project that hasn’t had much debt, if any, paid down in years.  This is the first in a series of blog posts to try to capture the process which is largely driven by intuition of smaller refactorings from other projects. Signs that refactoring could help: Testability How can decreasing test time not pay dividends? One of the first things I found was that a very important piece often takes 30+ minutes to test.  I can only imagine how much time this has cost historically, but more importantly the time it might cost in the coming weeks: I estimate at least 10-20 hours per person!  This is simply unacceptable for almost any situation.  As it turns out, about 6 hours of working with this part of the application and I was able to cut the time down to under 30 seconds!  In less than the lost time of one week, I was able to fix the problem for all future weeks! If we can’t test fast then we can’t change fast, nor with confidence. Code is used by end users and it’s also used by developers, consider your own needs in terms of the code base.  Adding logic to enable/disable features during testing can help decouple parts of an application and lead to massive improvements.  What exactly is so wrong about test code in real code?  Often, these become features for operators and sometimes end users.  If you cannot run an integration test within a test runner in your IDE, it’s time to refactor. Readability Are variables named meaningfully via a ubiquitous language? Is the code segmented functionally or behaviorally so as to minimize the complexity of any one area? Are aspects properly segmented to avoid confusion (security, logging, transactions, translations, dependency management etc) Is the code declarative (what) or imperative (how)?  What matters, not how.  LINQ is a great abstraction of the what, not how, of collection manipulation.  The Reactive framework is a great example of the what, not how, of managing streams of data. Are constants abstracted and named, or are they just inline? Do people constantly bitch about the code/design? If the code is hard to understand, it will be hard to change with confidence.  It’s a large undertaking if the original designers didn’t pay much attention to readability and as such will never be done to “completion.”  Make sure not to go over board, instead use this as you change an application, not in lieu of changes (like with testability). Complexity Simplicity will never be achieved, it’s highly subjective.  That said, a lot of code can be significantly simplified, tidy it up as you go.  Refactoring will often converge upon a simplification step after enough time, keep an eye out for this. Understandability In the process of changing code, one often gains a better understanding of it.  Refactoring code is a good way to learn how it works.  However, it’s usually best in combination with other reasons, in effect killing two birds with one stone.  Often this is done when readability is poor, in which case understandability is usually poor as well.  In the large undertaking we are making with this legacy application, we will be replacing it.  Therefore, understanding all of its features is important and this refactoring technique will come in very handy. Unused code How can deleting things not help? This is a freebie in refactoring, it’s very easy to detect with modern tools, especially in statically typed languages.  We have VCS for a reason, if in doubt, delete it out (ok that was cheesy)! If you don’t know where to start when refactoring, this is an excellent starting point! Duplication Do not pray and sacrifice to the anti-duplication gods, there are excellent examples where consolidated code is a horrible idea, usually with divergent domains.  That said, mediocre developers live by copy/paste.  Other times features converge and aren’t combined.  Tools for finding similar code are great in the example of copy/paste problems.  Knowledge of the domain helps identify convergent concepts that often lead to convergent solutions and will give intuition for where to look for conceptual repetition. 80/20 and the Boy Scouts It’s often said that 80% of the time 20% of the application is used most.  These tend to be the parts that are changed.  There are also parts of the code where 80% of the time is spent changing 20% (probably for all the refactoring smells above).  I focus on these areas any time I make a change and follow the philosophy of the Boy Scout in cleaning up more than I messed up.  If I spend 2 hours changing an application, in the 20%, I’ll always spend at least 15 minutes cleaning it or nearby areas. This gives a huge productivity edge on developers that don’t. Ironically after a short period of time the 20% shrinks enough that we don’t have to spend 80% of our time there and can move on to other areas.   Refactoring is highly subjective, never attempt to refactor to completion!  Learn to be comfortable with leaving one part of the application in a better state than others.  It’s an evolution, not a revolution.  These are some simple areas to look into when making changes and can help get one started in the process.  I’ve often found that refactoring is a convergent process towards simplicity that sometimes spans a few hours but often can lead to massive simplifications over the timespan of weeks and months of regular development.

  Read the article

• Outlook 2007 GAL Phone List

  - by s15199d

  I just spent a lot of time populating Phone Numbers and Fax Numbers in our GAL/Active Directory. The goal of which was to replace our static *.xlsx file that we use as a corporate phone directory. I know I can see the GAL by clicking on the To... button, and I can see more specific info for a particular user, by adding them as a recipient and double-clicking their name in the To: field. Is there any way (inside Outlook) to have a laundry-list view of all users and phone/fax/mobile/address similar to the phone list view for contacts? Are there any other tools that might provide this functionality. I've used a GAL web interface before, but that cost $ and as I recall was challenging to manage.

  Read the article

• Reset / Remove - Google Keywords

  - by Herr Kaleun

  Summary: My site is ranking for filthy keywords and i would like to remove them from google ranking/keywords. Background: My server was hacked using the timthumb exploit/security vulnerability, apparently i was the last person on earth to read the news about the exploit, several months after it appeared. Anyway, the "hacker" was so friendly to modify the index.php file in such a fashion, that it generated random sexual oriented keywords if the website is fetched as google-bot. So if you would fetch it as google bot/it gets indexed, you would get randomly generated keywords like: sex videos teenager teen sex adult sex preteen A LINK TO A RANDOM CONTENT OF MY WEBPAGE anime sex videos a rough list something similar to that, about 180-200 per page. I've discovered it far too late, so that google had me indexed for the words "sex" and certain adult oriented keywords, about roughly 2000. I've removed all the content, toke the site down, replaced the index.php with a static HTML and added a "ERROR 410" title to the website so that the content is no longer here and removed permanently. I've also applied for a manual review of my website, about 1.5 months ago but still, the keywords are there, and very strange, some of the keyword rankings actually "improve" over time. Here are some screenshots from webmasters tools: Question: How can i remove this filthy keywords and re-rank my website as a "normal" website on the fastest way? I want to "REMOVE" the keywords if possible. Please help me or point me into a direction. Thank you

  Read the article

• Win7 Prof. Computer won't wake on lan via Magic Packet from outside network

  - by Michael

  Hi all. I just purchased a new computer running Windows 7 Professional x64. I'd like to save power by having it sleep after an hour, but I would also like to be able to Remote Desktop into it at my leisure. I set up a static IP and have port forwarding set up on the router. If the computer is awake, the RDP connection works just fine. I downloaded and installed Wake-On-Lan thanks to this article If I put my new computer to sleep and send the magic packet from my old computer inside of my home network it wakes up. If I do the same thing, however, from my work computer outside the network it does not. I figured the Firewall was blocking the incoming traffic, but nothing in the Windows Firewall logs points to this happening. I'm wondering if anyone has any suggestions or any tests I can run through in order to narrow down what the problem might be. Thanks in advance for any help you might be able to offer.

  Read the article

• [SOLVED]Need help with remote dekstop - Limit the computers you can access server from

  - by stirredo

  I have a windows server 2003 computer that is accessed by remote desktop connection. To access the server all you need to know is the IP address of the computer. I want to limit the computers that can access the windows server computer to authorized computers only. The authorized computers won't have static IPs, so I cannot limit them on basis of IP address. Can I limit them on basis of MAC id perhaps? I won't mind using third party solution like Teamviewer or Logmein etc. So How can I solve this problem? EDIT: Found a possible solution in team viewer. Team viewer creates a unique partner ID for the computer it is installed on. It has an option for allowing only authorized partner IDs to access the computer. Problem solved.

  Read the article

• Netsh commands not working on remote computer

  - by Mike Christiansen

  Hello, At work, we are in the process of migrating over 200 computers from static IPs to DHCP. The DHCP server is configured. My biggest hurdle is physically going to every single computer in the area and configuring them all for DHCP. I am trying to use netsh to accomplish this. However, I cannot even seem to set one computer to DHCP remotely. The command I am trying is: netsh -r COMPUTERNAME interface ip set address name="Local Area Connection" source=dhcp netsh -r COMPUTERNAME interface ip set dns name="Local Area Connection" source=dhcp This results in the error The following command was not found: interface ip set address "name=Local Area Connection" source=dhcp. Any ideas?

  Read the article

• can ping, but not SSH

  - by Matt

  So I have NetworkManager, connected to an AP on wlan1. I have wlan0 connected to a AdHoc network. I have Firestarter sharing my inet on the Adhoc. I have my ipod connected to wlan0, IP 10.42.43.101. wlan0 Link encap:Ethernet HWaddr ac:xx:12:81:7f:xx inet addr:10.42.43.1 Bcast:10.255.255.255 Mask:255.0.0.0 wlan1 Link encap:Ethernet HWaddr 00:xx:b3:98:f2:xx inet addr:10.0.1.61 Bcast:10.0.1.255 Mask:255.255.255.0 Now, I can ping my Jailbroken, SSH-enabled and running ipod touch: matt: ~ $ ping 10.42.43.101 PING 10.42.43.101 (10.42.43.101) 56(84) bytes of data. 64 bytes from 10.42.43.101: icmp_req=1 ttl=64 time=168 ms 64 bytes from 10.42.43.101: icmp_req=2 ttl=64 time=256 ms 64 bytes from 10.42.43.101: icmp_req=3 ttl=64 time=151 ms ^C --- 10.42.43.101 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 151.465/191.979/256.316/46.003 But I cannot SSH it: $ ssh [email protected] -vv OpenSSH_5.8p1 Debian-1ubuntu3, OpenSSL 0.9.8o 01 Jun 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 10.42.43.101 [10.42.43.101] port 22. It just stays there till I ^C it.. Here's my routing: $ ip route show 10.0.1.0/24 dev wlan1 proto kernel scope link src 10.0.1.61 metric 2 10.0.1.0/24 dev wlan1 proto kernel scope link src 10.0.1.61 metric 319 169.254.0.0/16 dev vboxnet0 proto kernel scope link src 169.254.128.223 metric 204 10.0.0.0/8 dev wlan0 proto kernel scope link src 10.42.43.1 default via 10.0.1.1 dev wlan1 proto static default via 10.0.1.1 dev wlan1 metric 319

  Read the article

• How to run the pixel shader effcet??

  - by Yashwinder

  Below stated is the code for my pixel shader which I am rendering after the vertex shader. I have set the wordViewProjection matrix in my program but I don't know to set the progress variable i.e in my pixel shader file which will make the image displayed by the help of a quad to give out transition effect. Here is the code for my pixel shader program::: As my pixel shader is giving a static effect and now I want to use it to give some effect. So for this I have to add a progress variable in my pixel shader and initialize to the Constant table function i.e constantTable.SetValue(D3DDevice,"progress",progress ); I am having the problem in using this function for progress in my program. Anybody know how to set this variable in my program. And my new pixel Shader code is float progress : register(C0); sampler2D implicitInput : register(s0); sampler2D oldInput : register(s1); struct VS_OUTPUT { float4 Position : POSITION; float4 Color : COLOR0; float2 UV : TEXCOORD 0; }; float4 Blinds(float2 uv) { if(frac(uv.y * 5) < progress) { return tex2D(implicitInput, uv); } else { return tex2D(oldInput, uv); } } // Pixel Shader { return Blinds(input.UV); }

  Read the article

• Scale a game object to Bounds

  - by Spikeh

  I'm trying to scale a lot of dynamically created game objects in Unity3D to the bounds of a sphere collider, based on the size of their current mesh. Each object has a different scale and mesh size. Some are bigger than the AABB of the collider, and some are smaller. Here's the script I've written so far: private void ScaleToCollider(GameObject objectToScale, SphereCollider sphere) { var currentScale = objectToScale.transform.localScale; var currentSize = objectToScale.GetMeshHierarchyBounds().size; var targetSize = (sphere.radius * 2); var newScale = new Vector3 { x = targetSize * currentScale.x / currentSize.x, y = targetSize * currentScale.y / currentSize.y, z = targetSize * currentScale.z / currentSize.z }; Debug.Log("{0} Current scale: {1}, targetSize: {2}, currentSize: {3}, newScale: {4}, currentScale.x: {5}, currentSize.x: {6}", objectToScale.name, currentScale, targetSize, currentSize, newScale, currentScale.x, currentSize.x); //DoorDevice_meshBase Current scale: (0.1, 4.0, 3.0), targetSize: 5, currentSize: (2.9, 4.0, 1.1), newScale: (0.2, 5.0, 13.4), currentScale.x: 0.125, currentSize.x: 2.869114 //RedControlPanelForAirlock_meshBase Current scale: (1.0, 1.0, 1.0), targetSize: 5, currentSize: (0.0, 0.3, 0.2), newScale: (147.1, 16.7, 25.0), currentScale.x: 1, currentSize.x: 0.03400017 objectToScale.transform.localScale = newScale; } And the supporting extension method: public static Bounds GetMeshHierarchyBounds(this GameObject go) { var bounds = new Bounds(); // Not used, but a struct needs to be instantiated if (go.renderer != null) { bounds = go.renderer.bounds; // Make sure the parent is included Debug.Log("Found parent bounds: " + bounds); //bounds.Encapsulate(go.renderer.bounds); } foreach (var c in go.GetComponentsInChildren<MeshRenderer>()) { Debug.Log("Found {0} bounds are {1}", c.name, c.bounds); if (bounds.size == Vector3.zero) { bounds = c.bounds; } else { bounds.Encapsulate(c.bounds); } } return bounds; } After the re-scale, there doesn't seem to be any consistency to the results - some objects with completely uniform scales (x,y,z) seem to resize correctly, but others don't :| Its one of those things I've been trying to fix for so long I've lost all grasp on any of the logic :| Any help would be appreciated!

  Read the article

• Reviewing firewall rules

  - by chmeee

  I need to review firewall rules of a CheckPoint firewall for a customer (with 200+ rules). I have used FWDoc in the past to extract the rules and convert them to other formats but there was some errors with exclusions. I then analyze them manually to produce an improved version of the rules (usually in OOo Calc) with comments. I know there are several visualization techniques but they all go down to analyzing the traffic and I want static analysis. So I was wondering, what process do you follow to analyze firewall rules? What tools do you use (not only for Checkpoint)?

  Read the article

• Partial recalculation of visibility on a 2D uniform grid

  - by Martin Källman

  Problem Imagine that we have a 2D uniform grid of dimensions N x N. For this grid we have also pre-computed a visibility look-up table, e.g. with DDA, which answers the boolean query is cell X visible from cell Y? The look-up table is a complete graph KN of the cells V in the grid, with each edge E being a binary value denoting the visibility between its vertices. Question If any given cell has its visibility modified, is it possible to extract the subset Edelta of edges which must have their visibility recomputed due to the change, so as to avoid a full-on recomputation for the entire grid? (Which is N(N-1) / 2 or N2 depending on the implementation) Update If is not possible to solve thi in closed form, then maintaining a separate mapping of each cell and every cell pair who's line intersects said cell might also be an option. This obviously consumes more memory, but the data is static. The increased memory requirement could be reduced by introducing a hierarchy, subdividing the grid into smaller parts, and by doing so the above mapping can be reused for each sub-grid. This would come at a cost in terms of increased computation relative to the number of subdivisions; also requiring a resumable ray-casting algorithm.

  Read the article

• Can't Mount Phone, "according to mtab, /dev/sdb1 is already mounted on /"

  - by RPG Master

  My myTouch Slide wasn't mounting, so I decided to open Disk Utility. My phone shows up but when I click "Mount" it gives me this error: Error mounting: mount exited with exit code 1: helper failed with: mount: according to mtab, /dev/sdb1 is already mounted on / mount failed Here's my mtab: /dev/sdb1 / ext4 rw,errors=remount-ro,commit=0 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 none /sys sysfs rw,noexec,nosuid,nodev 0 0 fusectl /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 none /dev devtmpfs rw,mode=0755 0 0 none /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 none /dev/shm tmpfs rw,nosuid,nodev 0 0 none /var/run tmpfs rw,nosuid,mode=0755 0 0 none /var/lock tmpfs rw,noexec,nosuid,nodev 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0 gvfs-fuse-daemon /home/matthew/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=matthew 0 0 /dev/sdg1 /media/Seagate\040GoFlex ext4 rw,nosuid,nodev,uhelper=udisks 0 0 EDIT: Here's my fstab: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/sda1 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=3b0db205-2bdb-4c98-a506-6bdd3520d540 none swap sw 0 0

  Read the article

• Create 301 Redirection in Amazon Route 53 for Wildcard Subdomains

  - by Eric Yin

  My domain name hosted on Route 53 DNS. Amazon has a guide to do 301 redirection for www. To naked domain by point www. version to a S3 static website with 301 setted up. My question is, how can I have *.domain.com all have 301 redirec to naked domain name. I guess either: Some way to get all wildcard subdomains end up into one S3 bucket, how? Or: Use CloudFront on the www. version S3 site and put wildcard subdomains on the CloudFront, but how? Or: There's some hidden settings just lies on Router 53, then where? Or: use EC2, better not suggest me this, too costing for this task. Please advice.

  Read the article

• Junit test bluej [closed]

  - by user1721929

  Can someone make a junit test of this? public class PersonName { int NumberNames(String wholename) { // store the name passed in to the method String testname=wholename; // initialize number of names found int numnames=0; // on each iteration remove one name while(testname.length()>numnames) { // take the "white space" from the beginning and end testname = testname.trim(); // determine the position of the first blank // .. end of the first word int posBlank= testname.indexOf(' '); // cut off word /** * it continues to the stop sign because that is where you commanded it to end */ testname=testname.substring(posBlank+1,testname.length()); // System.out.println(numnames); // System.out.println(testname); numnames++; System.out.println(testname); } return numnames; } public static void main(String args[]) { PersonName One= new PersonName(); System.out.println(One.NumberNames("Bobby")); System.out.println(One.NumberNames("Bobby Smith")); System.out.println(One.NumberNames("Bobby L. Smith")); System.out.println(One.NumberNames(" Bobby Paul Smith Jr. ")); } }

  Read the article

• Monitor network connectivity in WP7 apps

  - by Daniel Moth

  Most interesting Windows Phone apps rely on some network service for their functionality. So at some point in your app you may need to know programmatically if there is network connection available or not. For example, the Translator by Moth app relies on the Bing Translation service for translations. When a request for translation (text or voice) is made, the network call may fail. The failure reason is not evident from any of the return results, so I check the connection to see if it is present. Dependent on that, a different message is shown to the user. Before the translation phase is even reached, at the app start up time the Bing service is queried for its list of  languages; in that case I don't want to show the user a message and instead want to be notified when the network is available in order to send the query out again. So for those two requirements (which I imagine are common in other apps) I wrote a simple wrapper MyNetwork static class to the framework APIs: Call once MyNetwork.MonitorNetworkAvailability() method so it monitors the network change At any time check the MyNetwork.IsConnected property to check for network presence Subscribe to its MyNetwork.ConnectionEstablished event Optionally, during debugging use its MyNetwork.ChangeStatus method to simulate a change in network status As usual, there may be better ways to achieve this, but this class works perfectly for my scenarios. You can download the code here: MyNetworks.cs. Comments about this post welcome at the original blog.

  Read the article

• Supporting copy 'n paste in your Windows Phone app

  - by Daniel Moth

  Some Windows Phone 7 owners already have the NoDo update, and others are getting it soon. This update brings, among other things, copy & paste support for text boxes. The user taps on a piece of text (and can drag in either direction to select more/less words), a popup icon appears that when tapped copies the text to the clipboard, and then at any app that shows the soft input panel there is an icon option to paste the copied text into the associated textbox. For more read this 'how to'. Note that there is no programmatic access to the clipboard, only the end user experience I just summarized, so there is nothing you need to do for your app's textboxes to support copy & paste: it just works. The only issue may be if in your app you use static TextBlock controls, for which the copy support will not appear, of course. That was the case with my Translator by Moth app where the translated text appears in a TextBlock. So, I wanted the user to be able to copy directly from the translated text (without offering an editable TextBox for an area where user input does not make sense). Take a look at a screenshot of my app before I made any changes to it. I then made changes to it preserving the look and feel, yet with additional copy support (see screenshot on the right)! So how did I achieve that? Simply by using my co-author's template (thanks Peter!): Copyable TextBlock for Windows Phone.   (aside: in my app even without this change there is a workaround, the user could use the "swap" feature to swap the source and target, so they can copy from the text box) Comments about this post welcome at the original blog.

  Read the article

• How to implement fast search on Azure Blob?

  - by Vicky

  I am done with writing the code to upload files (text files) to azure blob storage. Now I want to provide search based on text files content. For ex. If I search for "Hello" then the name of files that contains "Hello" words should appear in search result. Here my code to search class BlobSearch { static void Main(string[] args) { string searchText = "Hello"; CloudStorageAccount account = CloudStorageAccount.Parse(azureConString); CloudBlobClient blobClient = account.CreateCloudBlobClient(); CloudBlobContainer blobContainer = blobClient.GetContainerReference("MyBlobContainer"); blobContainer.FetchAttributes(); var blobItemList = blobContainer.ListBlobs(); foreach (var item in blobItemList) { string line = string.Empty; CloudBlockBlob blockBlob = blobContainer.GetBlockBlobReference(item.Uri.ToString()); if(blockBlob.Name.Contains(".txt")) { int lineno = 1; using (var stream = blockBlob.OpenRead()) { using (StreamReader reader = new StreamReader(stream)) { while ((line = reader.ReadLine()) != null) { if (line.IndexOf(searchText) != -1) { Console.WriteLine("Line : " + lineno +" => "+ blockBlob.Name); } lineno++; } } } } } Console.WriteLine("SEARCH COMPLETE"); Console.ReadLine(); } } Above code is working but it is too slow. Is there any way to do it faster or Can improve above code.

  Read the article

• Internet connection very slow after Linksys configuration

  - by NLV

  Hello We have this network setup Server1 - DHCP server, Domain Controller, AD Lease line for Internet connection From lease line to Linksys router (we dont use wireless though) From linksys to Netgear (24 port Switch) and vonage (VoIP) Netgear to all our machines We configured Linsys with the static IP and DNS server addresses our ISP gave and we have routed it correctly. All our work machines are configured with Get IP automatically DNS server addresses our ISP gave The problem is that none of the sites are getting opened promptly. It is taking around 5 minutes to load google.com. But we are able to ping all the sites. What could be the problem?

  Read the article

< Previous Page | 354 355 356 357 358 359 360 361 362 363 364 365  | Next Page >