Search Results

Search found 11208 results on 449 pages for '200 success'.

Page 36/449 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

• Can't connect to samba using openVPN

  - by Arthur

  I'm fairly new to using VPN. For a home project I'm running a OpenVPN server. This server runs within a network 192.168.2.0 and subnet 255.255.255.0 I can connect to this net work using the ip range 5.5.0.0 I guess the subnet is 255.255.255.192, but I'm not really sure about that. When connecting to my VPN network I can access the server via 5.5.0.1 and I can see the samba shares created on that machine. However I'm not allowed to connect to the samba share. When I look at the samba log of the computer which tries to connect I can see these messages: lib/access.c:338(allow_access) Denied connection from 5.5.0.132 (5.5.0.132) These are the share definition in /etc/samba/smb.conf interfaces = 192.168.2.0/32 5.5.0.0/24 security = user # wins-support = no # wins-server = w.x.y.z. // A LOT OF MORE SETTINGS AND COMMENTS hosts allow = 127.0.0.1 192.168.2.0/24 5.5.0.132/24 hosts deny = 0.0.0.0/0 browseable = yes path = [path to share] directory mask = 0755 force create mode = 0755 valid users = [a valid user, which i use to login with] writeable = yes force group = [the group i force to write with] force user = [the user i force to write with] This is the output of the ifconfig command as0t0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:5.5.0.1 P-t-P:5.5.0.1 Mask:255.255.255.192 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:200 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) as0t1 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:5.5.0.65 P-t-P:5.5.0.65 Mask:255.255.255.192 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:200 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) as0t2 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:5.5.0.129 P-t-P:5.5.0.129 Mask:255.255.255.192 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:xxxx errors:0 dropped:0 overruns:0 frame:0 TX packets:xxxx errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:200 RX bytes:xxxx (xxxx MB) TX bytes:12403514 (xxxx MB) as0t3 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:5.5.0.193 P-t-P:5.5.0.193 Mask:255.255.255.192 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:7041 errors:0 dropped:0 overruns:0 frame:0 TX packets:9797 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:200 RX bytes:xxxx (xxxx KB) TX bytes:xxxx (xxxx MB) eth1 Link encap:Ethernet HWaddr 00:0e:2e:61:78:21 inet addr:192.168.2.100 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: xxxx:xxxx:xxxx:xxxx:7821/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:xxxx errors:0 dropped:0 overruns:0 frame:0 TX packets:xxxx errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:xxxx (xxxx MB) TX bytes:xxxx (xxxx MB) Interrupt:16 Base address:0x6000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:xxxx errors:0 dropped:0 overruns:0 frame:0 TX packets:xxxx errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:xxxx (xxxx MB) TX bytes:xxxx (xxxx MB) Can anyone tell me what is going wrong? My server is running Ubuntu 12.04 LTS

  Read the article

• What's wrong with this vcl config for varnish-cache as load balancer?

  - by dabito

  I have the current configurations active on my default.vcl varnish file on the machine that balances the load for other two machines (the other two machines also have varnish active). My intention is to have this server do only the load balancing and the other machines do the processing and also their own caching. My problem is that even with the config testing (not even a stress test or anything, just a few requests a minute) I get the guru meditation error and have to restart varnish. This is the default.vcl for the load balancing server: backend vader { .host = "app1.server.com"; .probe = { .url = "/"; .interval = 10s; .timeout = 4s; .window = 5; .threshold = 3; } } backend malgus { .host = "app2.server.com"; .probe = { .url = "/"; .interval = 10s; .timeout = 4s; .window = 5; .threshold = 3; } } director dooku round-robin { { .backend = vader; } { .backend = malgus; } } sub vcl_recv { if (req.http.host ~ "^balancer.server.com$") { set req.backend = dooku; } } Am I doing something wrong or missing something? EDIT: This is varnishlog's output: 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1345839995 1.0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1345839998 1.0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1345840001 1.0 0 Backend_health - malgus Still sick 4--X--- 0 3 5 0.000000 3.846876 0 Backend_health - vader Still sick 4--X--- 0 3 5 0.000000 3.839194 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1345840004 1.0 14 SessionOpen c 10.150.7.151 38272 :80 14 ReqStart c 10.150.7.151 38272 458200540 14 RxRequest c GET 14 RxURL c / 14 RxProtocol c HTTP/1.1 14 RxHeader c Host: dooku-dev.excelsior.com 14 RxHeader c Connection: keep-alive 14 RxHeader c User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11 14 RxHeader c Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 14 RxHeader c Accept-Encoding: gzip,deflate,sdch 14 RxHeader c Accept-Language: en-US,en;q=0.8,es-419;q=0.6,es;q=0.4 14 RxHeader c Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 14 RxHeader c Cookie: SESSa87d6c6da0c61037a9169122dc5e4a19=HR_0Srhgc-uDArT3aJFzOBy31FtzneTXg38byr1eGMU; __atuvc=4%7C33 14 VCL_call c recv pass 14 VCL_call c hash 14 Hash c / 14 Hash c dooku-dev.excelsior.com 14 VCL_return c hash 14 VCL_call c pass pass 14 FetchError c no backend connection 14 VCL_call c error deliver 14 VCL_call c deliver deliver 14 TxProtocol c HTTP/1.1 14 TxStatus c 503 14 TxResponse c Service Unavailable 14 TxHeader c Server: Varnish 14 TxHeader c Content-Type: text/html; charset=utf-8 14 TxHeader c Retry-After: 5 14 TxHeader c Content-Length: 418 14 TxHeader c Accept-Ranges: bytes 14 TxHeader c Date: Fri, 24 Aug 2012 20:26:44 GMT 14 TxHeader c X-Varnish: 458200540 14 TxHeader c Age: 0 14 TxHeader c Via: 1.1 varnish 14 TxHeader c Connection: close 14 Length c 418 14 ReqEnd c 458200540 1345840004.916415691 1345840004.965190172 0.020933390 0.048741817 0.000032663 14 SessionClose c error 14 StatSess c 10.150.7.151 38272 0 1 1 0 1 0 256 418 14 SessionOpen c 10.150.7.151 38273 :80 14 ReqStart c 10.150.7.151 38273 458200541 14 RxRequest c GET 14 RxURL c /favicon.ico 14 RxProtocol c HTTP/1.1 14 RxHeader c Host: dooku-dev.excelsior.com 14 RxHeader c Connection: keep-alive 14 RxHeader c Accept: */* 14 RxHeader c User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11 14 RxHeader c Accept-Encoding: gzip,deflate,sdch 14 RxHeader c Accept-Language: en-US,en;q=0.8,es-419;q=0.6,es;q=0.4 14 RxHeader c Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 14 RxHeader c Cookie: SESSa87d6c6da0c61037a9169122dc5e4a19=HR_0Srhgc-uDArT3aJFzOBy31FtzneTXg38byr1eGMU; __atuvc=4%7C33 14 VCL_call c recv pass 14 VCL_call c hash 14 Hash c /favicon.ico 14 Hash c dooku-dev.excelsior.com 14 VCL_return c hash 14 VCL_call c pass pass 14 FetchError c no backend connection 14 VCL_call c error deliver 14 VCL_call c deliver deliver 14 TxProtocol c HTTP/1.1 14 TxStatus c 503 14 TxResponse c Service Unavailable 14 TxHeader c Server: Varnish 14 TxHeader c Content-Type: text/html; charset=utf-8 14 TxHeader c Retry-After: 5 14 TxHeader c Content-Length: 418 14 TxHeader c Accept-Ranges: bytes 14 TxHeader c Date: Fri, 24 Aug 2012 20:26:45 GMT 14 TxHeader c X-Varnish: 458200541 14 TxHeader c Age: 0 14 TxHeader c Via: 1.1 varnish 14 TxHeader c Connection: close 14 Length c 418 14 ReqEnd c 458200541 1345840005.226389885 1345840005.226457834 0.000026941 0.000043154 0.000024796 14 SessionClose c error 14 StatSess c 10.150.7.151 38273 0 1 1 0 1 0 256 418

  Read the article

• UITableViewCell selected subview ghosts

  - by Jonathan Cohen

  Hi all, I'm learning about the iPhone SDK and have an interesting exception with UITableViewCell subview management when a finger is pressed on some rows. The table is used to assign sounds to hand gestures -- swiping the phone in one of 3 directions triggers the sound to play. Selecting a row displays an action sheet with 4 options for sound assignment: left, down, right, and cancel. Sounds can be mapped to one, two, or three directions so any cell can have one of seven states: left, down, right, left and down, left and right, down and right, or left down and right. If a row is mapped to any of these seven states, a corresponding arrow or arrows are displayed within the bounds of the row as a subview. Arrows come and go as they should in a given screen and when scrolling around. However, after scrolling to a new batch of rows, only when I press my finger down on some (but not all) rows, does an arrow magically appear in the selected state background. When I lift my finger off the row, and the action sheet appears, the arrow disappears. After pressing any of the four buttons, I can't replicate this anymore. But it's really disorienting and confusing to see this arrow flash on screen because the selected row isn't assigned to anything. What haven't I thought to look into here? All my table code is pasted below and this is a screencast of the problem: http://www.screencast.com/users/JonathanGCohen/folders/Jing/media/d483fe31-05b5-4c24-ab4d-70de4ff3a0bf Am I managing my subviews wrong or is there a selected state property I'm missing? Something else? Should I have included any more information in this post to make things clearer? Thank you!! #pragma mark - #pragma mark Table - (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView { return ([categories count] > 0) ? [categories count] : 1; } - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { if ([categories count] == 0) return 0; NSMutableString *key = [categories objectAtIndex:section]; NSMutableArray *nameSection = [categoriesSounds objectForKey:key]; return [nameSection count]; } - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { NSUInteger section = [indexPath section]; NSUInteger row = [indexPath row]; NSString *key = [categories objectAtIndex:section]; NSArray *nameSection = [categoriesSounds objectForKey:key]; static NSString *SectionsTableIdentifier = @"SectionsTableIdentifier"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier: SectionsTableIdentifier]; NSArray *sound = [categoriesSounds objectForKey:key]; NSString *soundName = [[sound objectAtIndex: row] objectAtIndex: 0]; NSString *soundOfType = [[sound objectAtIndex: row] objectAtIndex: 1]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:SectionsTableIdentifier] autorelease]; } cell.textLabel.text = [[nameSection objectAtIndex:row] objectAtIndex: 0]; NSUInteger soundSection = [[[sound objectAtIndex: row] objectAtIndex: 2] integerValue]; NSUInteger soundRow = [[[sound objectAtIndex: row] objectAtIndex: 3] integerValue]; NSUInteger leftRow = [leftOldIndexPath row]; NSUInteger leftSection = [leftOldIndexPath section]; if (soundRow == leftRow && soundSection == leftSection && leftOldIndexPath !=nil){ [selectedSoundLeftAndDown removeFromSuperview]; [selectedSoundLeftAndRight removeFromSuperview]; [cell.contentView addSubview: selectedSoundLeft]; selectedSoundLeft.frame = CGRectMake(200,8,30,30); } else { [cell.contentView sendSubviewToBack: selectedSoundLeft]; } NSUInteger downRow = [downOldIndexPath row]; NSUInteger downSection = [downOldIndexPath section]; if (soundRow == downRow && soundSection == downSection && downOldIndexPath !=nil){ [selectedSoundLeftAndDown removeFromSuperview]; [selectedSoundDownAndRight removeFromSuperview]; [cell.contentView addSubview: selectedSoundDown]; selectedSoundDown.frame = CGRectMake(200,8,30,30); } else { [cell.contentView sendSubviewToBack: selectedSoundDown]; } NSUInteger rightRow = [rightOldIndexPath row]; NSUInteger rightSection = [rightOldIndexPath section]; if (soundRow == rightRow && soundSection == rightSection && rightOldIndexPath !=nil){ [selectedSoundDownAndRight removeFromSuperview]; [selectedSoundLeftAndRight removeFromSuperview]; [cell.contentView addSubview: selectedSoundRight]; selectedSoundRight.frame = CGRectMake(200,8,30,30); } else { [cell.contentView sendSubviewToBack: selectedSoundRight]; } // combos if (soundRow == leftRow && soundRow == downRow && soundSection == leftSection && soundSection == downSection){ [selectedSoundLeft removeFromSuperview]; [selectedSoundDown removeFromSuperview]; [selectedSoundLeftAndDownAndRight removeFromSuperview]; [cell.contentView addSubview: selectedSoundLeftAndDown]; selectedSoundLeftAndDown.frame = CGRectMake(200,8,30,30); } else { [cell.contentView sendSubviewToBack: selectedSoundLeftAndDown]; } if (soundRow == leftRow && soundRow == rightRow && soundSection == leftSection && soundSection == rightSection){ [selectedSoundLeft removeFromSuperview]; [selectedSoundRight removeFromSuperview]; [selectedSoundLeftAndDownAndRight removeFromSuperview]; [cell.contentView addSubview: selectedSoundLeftAndRight]; selectedSoundLeftAndRight.frame = CGRectMake(200,8,30,30); } else { [cell.contentView sendSubviewToBack: selectedSoundLeftAndRight]; } if (soundRow == downRow && soundRow == rightRow && soundSection == downSection && soundSection == rightSection){ [selectedSoundDown removeFromSuperview]; [selectedSoundRight removeFromSuperview]; [selectedSoundLeftAndDownAndRight removeFromSuperview]; [cell.contentView addSubview: selectedSoundDownAndRight]; selectedSoundDownAndRight.frame = CGRectMake(200,8,30,30); } else { [cell.contentView sendSubviewToBack: selectedSoundDownAndRight]; } if (soundRow == leftRow && soundRow == downRow && soundRow == rightRow && soundSection == leftSection && soundSection == downSection && soundSection == rightSection){ [selectedSoundLeftAndDown removeFromSuperview]; [selectedSoundLeftAndRight removeFromSuperview]; [selectedSoundDownAndRight removeFromSuperview]; [selectedSoundLeft removeFromSuperview]; [selectedSoundDown removeFromSuperview]; [selectedSoundRight removeFromSuperview]; [cell.contentView addSubview: selectedSoundLeftAndDownAndRight]; selectedSoundLeftAndDownAndRight.frame = CGRectMake(200,8,30,30); } else { [cell.contentView sendSubviewToBack: selectedSoundLeftAndDownAndRight]; } [indexPath retain]; return cell; } - (NSMutableString *)tableView:(UITableView *)tableView titleForHeaderInSection:(NSInteger)section { if ([categories count] == 0) return nil; NSMutableString *key = [categories objectAtIndex:section]; if (key == UITableViewIndexSearch) return nil; return key; } - (NSMutableArray *)sectionIndexTitlesForTableView:(UITableView *)tableView { if (isSearching) return nil; return categories; } - (NSIndexPath *)tableView:(UITableView *)tableView willSelectRowAtIndexPath:(NSIndexPath *)indexPath { [table reloadData]; [selectedSoundLeft removeFromSuperview]; [selectedSoundDown removeFromSuperview]; [selectedSoundRight removeFromSuperview]; [selectedSoundLeftAndDown removeFromSuperview]; [selectedSoundLeftAndRight removeFromSuperview]; [selectedSoundDownAndRight removeFromSuperview]; [selectedSoundLeftAndDownAndRight removeFromSuperview]; [search resignFirstResponder]; if (isSearching == YES && [search.text length] != 0 ){ searched = YES; } search.text = @""; isSearching = NO; [tableView reloadData]; [indexPath retain]; [indexPath retain]; return indexPath; } - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { [table reloadData]; selectedIndexPath = indexPath; [table reloadData]; NSInteger section = [indexPath section]; NSInteger row = [indexPath row]; NSString *key = [categories objectAtIndex:section]; NSArray *sound = [categoriesSounds objectForKey:key]; NSString *soundName = [[sound objectAtIndex: row] objectAtIndex: 0]; [indexPath retain]; [indexPath retain]; NSMutableString *title = [NSMutableString stringWithString: @"Assign Gesture for "]; NSMutableString *soundFeedback = [NSMutableString stringWithString: (@"%@", soundName)]; [title appendString: soundFeedback]; UIActionSheet *action = [[UIActionSheet alloc] initWithTitle:(@"%@", title) delegate:self cancelButtonTitle:@"Cancel" destructiveButtonTitle: nil otherButtonTitles:@"Left",@"Down",@"Right",nil]; action.actionSheetStyle = UIActionSheetStyleDefault; [action showInView:self.view]; [action release]; } - (void)actionSheet:(UIActionSheet *)actionSheet clickedButtonAtIndex:(NSInteger)buttonIndex{ NSInteger section = [selectedIndexPath section]; NSInteger row = [selectedIndexPath row]; NSString *key = [categories objectAtIndex:section]; NSArray *sound = [categoriesSounds objectForKey:key]; NSString *soundName = [[sound objectAtIndex: row] objectAtIndex: 0]; NSString *soundOfType = [[sound objectAtIndex: row] objectAtIndex: 1]; NSUInteger soundSection = [[[sound objectAtIndex: row] objectAtIndex: 2] integerValue]; NSUInteger soundRow = [[[sound objectAtIndex: row] objectAtIndex: 3] integerValue]; NSLog(@"sound row is %i", soundRow); NSLog(@"sound section is row is %i", soundSection); typedef enum { kLeftButton = 0, kDownButton, kRightButton, kCancelButton } gesture; switch (buttonIndex) { //Left case kLeftButton: showLeft.text = soundName; left = [[NSBundle mainBundle] pathForResource:(@"%@", soundName) ofType:(@"%@", soundOfType)]; AudioServicesCreateSystemSoundID((CFURLRef)[NSURL fileURLWithPath:left], &soundNegZ); AudioServicesPlaySystemSound (soundNegZ); [table deselectRowAtIndexPath:selectedIndexPath animated:YES]; leftIndexSection = [NSNumber numberWithInteger:section]; leftIndexRow = [NSNumber numberWithInteger:row]; NSInteger leftSection = [leftIndexSection integerValue]; NSInteger leftRow = [leftIndexRow integerValue]; NSString *leftKey = [categories objectAtIndex: leftSection]; NSArray *leftSound = [categoriesSounds objectForKey:leftKey]; NSInteger leftSoundSection = [[[leftSound objectAtIndex: leftRow] objectAtIndex: 2] integerValue]; NSInteger leftSoundRow = [[[leftSound objectAtIndex: leftRow] objectAtIndex: 3] integerValue]; leftOldIndexPath = [NSIndexPath indexPathForRow:leftSoundRow inSection:leftSoundSection]; break; //Down case kDownButton: showDown.text = soundName; down = [[NSBundle mainBundle] pathForResource:(@"%@", soundName) ofType:(@"%@", soundOfType)]; AudioServicesCreateSystemSoundID((CFURLRef)[NSURL fileURLWithPath:down], &soundNegX); AudioServicesPlaySystemSound (soundNegX); [table deselectRowAtIndexPath:selectedIndexPath animated:YES]; downIndexSection = [NSNumber numberWithInteger:section]; downIndexRow = [NSNumber numberWithInteger:row]; NSInteger downSection = [downIndexSection integerValue]; NSInteger downRow = [downIndexRow integerValue]; NSString *downKey = [categories objectAtIndex: downSection]; NSArray *downSound = [categoriesSounds objectForKey:downKey]; NSInteger downSoundSection = [[[downSound objectAtIndex: downRow] objectAtIndex: 2] integerValue]; NSInteger downSoundRow = [[[downSound objectAtIndex: downRow] objectAtIndex: 3] integerValue]; downOldIndexPath = [NSIndexPath indexPathForRow:downSoundRow inSection:downSoundSection]; break; //Right case kRightButton: showRight.text = soundName; right = [[NSBundle mainBundle] pathForResource:(@"%@", soundName) ofType:(@"%@", soundOfType)]; AudioServicesCreateSystemSoundID((CFURLRef)[NSURL fileURLWithPath:right], &soundPosX); AudioServicesPlaySystemSound (soundPosX); [table deselectRowAtIndexPath:selectedIndexPath animated:YES]; rightIndexSection = [NSNumber numberWithInteger:section]; rightIndexRow = [NSNumber numberWithInteger:row]; NSInteger rightSection = [rightIndexSection integerValue]; NSInteger rightRow = [rightIndexRow integerValue]; NSString *rightKey = [categories objectAtIndex: rightSection]; NSArray *rightSound = [categoriesSounds objectForKey:rightKey]; NSInteger rightSoundSection = [[[rightSound objectAtIndex: rightRow] objectAtIndex: 2] integerValue]; NSInteger rightSoundRow = [[[rightSound objectAtIndex: rightRow] objectAtIndex: 3] integerValue]; rightOldIndexPath = [NSIndexPath indexPathForRow:rightSoundRow inSection:rightSoundSection]; break; case kCancelButton: [table deselectRowAtIndexPath:selectedIndexPath animated:YES]; break; default: break; } UITableViewCell *viewCell = [table cellForRowAtIndexPath: selectedIndexPath]; NSArray *subviews = viewCell.subviews; for (UIView *cellView in subviews){ cellView.alpha = 1; } [table reloadData]; } - (NSInteger)tableView:(UITableView *)tableView sectionForSectionIndexTitle:(NSMutableString *)title atIndex:(NSInteger)index { NSMutableString *category = [categories objectAtIndex:index]; if (category == UITableViewIndexSearch) { [tableView setContentOffset:CGPointZero animated:NO]; return NSNotFound; } else return index; }

  Read the article

• Varnish "FetchError no backend connection" error

  - by clueless-anon

  Varnishlog: 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829925 1.0 12 SessionOpen c 79.124.74.11 3063 :80 12 SessionClose c EOF 12 StatSess c 79.124.74.11 3063 0 1 0 0 0 0 0 0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829928 1.0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829931 1.0 12 SessionOpen c 108.62.115.226 46211 :80 12 ReqStart c 108.62.115.226 46211 467185881 12 RxRequest c GET 12 RxURL c / 12 RxProtocol c HTTP/1.0 12 RxHeader c User-Agent: Pingdom.com_bot_version_1.4_(http://www.pingdom.com/) 12 RxHeader c Host: www.mysite.com 12 VCL_call c recv lookup 12 VCL_call c hash 12 Hash c / 12 Hash c www.mysite.com 12 VCL_return c hash 12 VCL_call c miss fetch 12 FetchError c no backend connection 12 VCL_call c error deliver 12 VCL_call c deliver deliver 12 TxProtocol c HTTP/1.1 12 TxStatus c 503 12 TxResponse c Service Unavailable 12 TxHeader c Server: Varnish 12 TxHeader c Content-Type: text/html; charset=utf-8 12 TxHeader c Retry-After: 5 12 TxHeader c Content-Length: 418 12 TxHeader c Accept-Ranges: bytes 12 TxHeader c Date: Wed, 27 Jun 2012 20:45:31 GMT 12 TxHeader c X-Varnish: 467185881 12 TxHeader c Age: 1 12 TxHeader c Via: 1.1 varnish 12 TxHeader c Connection: close 12 Length c 418 12 ReqEnd c 467185881 1340829931.192433119 1340829931.891024113 0.000051022 0.698516846 0.000074035 12 SessionClose c error 12 StatSess c 108.62.115.226 46211 1 1 1 0 0 0 256 418 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829934 1.0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829937 1.0 netstat -tlnp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 3086/nginx tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1915/varnishd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1279/sshd tcp 0 0 127.0.0.2:25 0.0.0.0:* LISTEN 3195/sendmail: MTA: tcp 0 0 127.0.0.2:6082 0.0.0.0:* LISTEN 1914/varnishd tcp 0 0 127.0.0.2:9000 0.0.0.0:* LISTEN 1317/php-fpm.conf) tcp 0 0 127.0.0.2:3306 0.0.0.0:* LISTEN 1192/mysqld tcp 0 0 127.0.0.2:587 0.0.0.0:* LISTEN 3195/sendmail: MTA: tcp 0 0 127.0.0.2:11211 0.0.0.0:* LISTEN 3072/memcached tcp6 0 0 :::8080 :::* LISTEN 3086/nginx tcp6 0 0 :::80 :::* LISTEN 1915/varnishd tcp6 0 0 :::22 :::* LISTEN 1279/sshd /etc/nginx/site-enabled/default server { listen 8080; ## listen for ipv4; this line is default and implied listen [::]:8080 default ipv6only=on; ## listen for ipv6 root /usr/share/nginx/www; index index.html index.htm index.php; # Make site accessible from http://localhost/ server_name localhost; location / { # First attempt to serve request as file, then # as directory, then fall back to index.html try_files $uri $uri/ /index.html; } location /doc { root /usr/share; autoindex on; allow 127.0.0.2; deny all; } location /images { root /usr/share; autoindex off; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # #error_page 500 502 503 504 /50x.html; #location = /50x.html { # root /usr/share/nginx/www; #} # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { fastcgi_pass 127.0.0.2:9000; fastcgi_index index.php; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } /etc/nginx/sites-enabled/www.mysite.com.vhost server { listen 8080; server_name www.mysite.com mysite.com.net; root /var/www/www.mysite.com/web; if ($http_host != "www.mysite.com") { rewrite ^ http://www.mysite.com$request_uri permanent; } index index.php index.html; location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { allow all; log_not_found off; access_log off; } # Deny all attempts to access hidden files such as .htaccess, .htpasswd, .DS_Store (Mac). location ~ /\. { deny all; access_log off; log_not_found off; } location / { try_files $uri $uri/ /index.php?$args; } # Add trailing slash to */wp-admin requests. rewrite /wp-admin$ $scheme://$host$uri/ permanent; location ~* \.(jpg|jpeg|png|gif|css|js|ico)$ { expires max; log_not_found off; } location ~ \.php$ { try_files $uri =404; include /etc/nginx/fastcgi_params; fastcgi_pass 127.0.0.2:9000; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } include /var/www/www.mysite.com/web/nginx.conf; location ~ /nginx.conf { deny all; access_log off; log_not_found off; } } /etc/varnish/default.vcl # This is a basic VCL configuration file for varnish. See the vcl(7) # man page for details on VCL syntax and semantics. # # Default backend definition. Set this to point to your content # server. # backend default { .host = "127.0.0.2"; .port = "8080"; # .connect_timeout = 600s; #.first_byte_timeout = 600s; # .between_bytes_timeout = 600s; # .max_connections = 800; Note: uncommenting the last four options at default.vcl made no difference. cat /etc/default/varnish # Configuration file for varnish # # /etc/init.d/varnish expects the variables $DAEMON_OPTS, $NFILES and $MEMLOCK # to be set from this shell script fragment. # # Should we start varnishd at boot? Set to "yes" to enable. START=yes # Maximum number of open files (for ulimit -n) NFILES=131072 # Maximum locked memory size (for ulimit -l) # Used for locking the shared memory log in memory. If you increase log size, # you need to increase this number as well MEMLOCK=82000 # Default varnish instance name is the local nodename. Can be overridden with # the -n switch, to have more instances on a single server. INSTANCE=$(uname -n) # This file contains 4 alternatives, please use only one. ## Alternative 1, Minimal configuration, no VCL # # Listen on port 6081, administration on localhost:6082, and forward to # content server on localhost:8080. Use a 1GB fixed-size cache file. # # DAEMON_OPTS="-a :6081 \ # -T localhost:6082 \ # -b localhost:8080 \ # -u varnish -g varnish \ # -S /etc/varnish/secret \ # -s file,/var/lib/varnish/$INSTANCE/varnish_storage.bin,1G" ## Alternative 2, Configuration with VCL # # Listen on port 6081, administration on localhost:6082, and forward to # one content server selected by the vcl file, based on the request. Use a 1GB # fixed-size cache file. # DAEMON_OPTS="-a :80 \ -T 127.0.0.2:6082 \ -f /etc/varnish/default.vcl \ -S /etc/varnish/secret \ -s file,/var/lib/varnish/$INSTANCE/varnish_storage.bin,1G" If you need any other info let me know. I am all out of clue as to whats the problem.

  Read the article

• What's up with LDoms: Part 2 - Creating a first, simple guest

  - by Stefan Hinker

  Welcome back! In the first part, we discussed the basic concepts of LDoms and how to configure a simple control domain.  We saw how resources were put aside for guest systems and what infrastructure we need for them.  With that, we are now ready to create a first, very simple guest domain.  In this first example, we'll keep things very simple.  Later on, we'll have a detailed look at things like sizing, IO redundancy, other types of IO as well as security. For now,let's start with this very simple guest.  It'll have one core's worth of CPU, one crypto unit, 8GB of RAM, a single boot disk and one network port.  CPU and RAM are easy.  The network port we'll create by attaching a virtual network port to the vswitch we created in the primary domain.  This is very much like plugging a cable into a computer system on one end and a network switch on the other.  For the boot disk, we'll need two things: A physical piece of storage to hold the data - this is called the backend device in LDoms speak.  And then a mapping between that storage and the guest domain, giving it access to that virtual disk.  For this example, we'll use a ZFS volume for the backend.  We'll discuss what other options there are for this and how to chose the right one in a later article.  Here we go: root@sun # ldm create mars root@sun # ldm set-vcpu 8 mars root@sun # ldm set-mau 1 mars root@sun # ldm set-memory 8g mars root@sun # zfs create rpool/guests root@sun # zfs create -V 32g rpool/guests/mars.bootdisk root@sun # ldm add-vdsdev /dev/zvol/dsk/rpool/guests/mars.bootdisk \ mars.root@primary-vds root@sun # ldm add-vdisk root mars.root@primary-vds mars root@sun # ldm add-vnet net0 switch-primary mars That's all, mars is now ready to power on.  There are just three commands between us and the OK prompt of mars:  We have to "bind" the domain, start it and connect to its console.  Binding is the process where the hypervisor actually puts all the pieces that we've configured together.  If we made a mistake, binding is where we'll be told (starting in version 2.1, a lot of sanity checking has been put into the config commands themselves, but binding will catch everything else).  Once bound, we can start (and of course later stop) the domain, which will trigger the boot process of OBP.  By default, the domain will then try to boot right away.  If we don't want that, we can set "auto-boot?" to false.  Finally, we'll use telnet to connect to the console of our newly created guest.  The output of "ldm list" shows us what port has been assigned to mars.  By default, the console service only listens on the loopback interface, so using telnet is not a large security concern here. root@sun # ldm set-variable auto-boot\?=false mars root@sun # ldm bind mars root@sun # ldm start mars root@sun # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- UART 8 7680M 0.5% 1d 4h 30m mars active -t---- 5000 8 8G 12% 1s root@sun # telnet localhost 5000 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. ~Connecting to console "mars" in group "mars" .... Press ~? for control options .. {0} ok banner SPARC T3-4, No Keyboard Copyright (c) 1998, 2011, Oracle and/or its affiliates. All rights reserved. OpenBoot 4.33.1, 8192 MB memory available, Serial # 87203131. Ethernet address 0:21:28:24:1b:50, Host ID: 85241b50. {0} ok We're done, mars is ready to install Solaris, preferably using AI, of course ;-)  But before we do that, let's have a little look at the OBP environment to see how our virtual devices show up here: {0} ok printenv auto-boot? auto-boot? = false {0} ok printenv boot-device boot-device = disk net {0} ok devalias root /virtual-devices@100/channel-devices@200/disk@0 net0 /virtual-devices@100/channel-devices@200/network@0 net /virtual-devices@100/channel-devices@200/network@0 disk /virtual-devices@100/channel-devices@200/disk@0 virtual-console /virtual-devices/console@1 name aliases We can see that setting the OBP variable "auto-boot?" to false with the ldm command worked.  Of course, we'd normally set this to "true" to allow Solaris to boot right away once the LDom guest is started.  The setting for "boot-device" is the default "disk net", which means OBP would try to boot off the devices pointed to by the aliases "disk" and "net" in that order, which usually means "disk" once Solaris is installed on the disk image.  The actual devices these aliases point to are shown with the command "devalias".  Here, we have one line for both "disk" and "net".  The device paths speak for themselves.  Note that each of these devices has a second alias: "net0" for the network device and "root" for the disk device.  These are the very same names we've given these devices in the control domain with the commands "ldm add-vnet" and "ldm add-vdisk".  Remember this, as it is very useful once you have several dozen disk devices... To wrap this up, in this part we've created a simple guest domain, complete with CPU, memory, boot disk and network connectivity.  This should be enough to get you going.  I will cover all the more advanced features and a little more theoretical background in several follow-on articles.  For some background reading, I'd recommend the following links: LDoms 2.2 Admin Guide: Setting up Guest Domains Virtual Console Server: vntsd manpage - This includes the control sequences and commands available to control the console session. OpenBoot 4.x command reference - All the things you can do at the ok prompt

  Read the article

• xml file save/read error (making a highscore system for XNA game)

  - by Eddy

  i get an error after i write player name to the file for second or third time (An unhandled exception of type 'System.InvalidOperationException' occurred in System.Xml.dll Additional information: There is an error in XML document (18, 17).) (in highscores load method In data = (HighScoreData)serializer.Deserialize(stream); it stops) the problem is that some how it adds additional "" at the end of my .dat file could anyone tell me how to fix this? the file before save looks: <?xml version="1.0"?> <HighScoreData xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <PlayerName> <string>neil</string> <string>shawn</string> <string>mark</string> <string>cindy</string> <string>sam</string> </PlayerName> <Score> <int>200</int> <int>180</int> <int>150</int> <int>100</int> <int>50</int> </Score> <Count>5</Count> </HighScoreData> the file after save looks: <?xml version="1.0"?> <HighScoreData xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <PlayerName> <string>Nick</string> <string>Nick</string> <string>neil</string> <string>shawn</string> <string>mark</string> </PlayerName> <Score> <int>210</int> <int>210</int> <int>200</int> <int>180</int> <int>150</int> </Score> <Count>5</Count> </HighScoreData>> the part of my code that does all of save load to xml is: DECLARATIONS PART [Serializable] public struct HighScoreData { public string[] PlayerName; public int[] Score; public int Count; public HighScoreData(int count) { PlayerName = new string[count]; Score = new int[count]; Count = count; } } IAsyncResult result = null; bool inputName; HighScoreData data; int Score = 0; public string NAME; public string HighScoresFilename = "highscores.dat"; Game1 constructor public Game1() { graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; Width = graphics.PreferredBackBufferWidth = 960; Height = graphics.PreferredBackBufferHeight =640; GamerServicesComponent GSC = new GamerServicesComponent(this); Components.Add(GSC); } Inicialize function (end of it) protected override void Initialize() { //other game code base.Initialize(); string fullpath =Path.Combine(HighScoresFilename); if (!File.Exists(fullpath)) { //If the file doesn't exist, make a fake one... // Create the data to save data = new HighScoreData(5); data.PlayerName[0] = "neil"; data.Score[0] = 200; data.PlayerName[1] = "shawn"; data.Score[1] = 180; data.PlayerName[2] = "mark"; data.Score[2] = 150; data.PlayerName[3] = "cindy"; data.Score[3] = 100; data.PlayerName[4] = "sam"; data.Score[4] = 50; SaveHighScores(data, HighScoresFilename); } } all methods for loading saving and output public static void SaveHighScores(HighScoreData data, string filename) { // Get the path of the save game string fullpath = Path.Combine("highscores.dat"); // Open the file, creating it if necessary FileStream stream = File.Open(fullpath, FileMode.OpenOrCreate); try { // Convert the object to XML data and put it in the stream XmlSerializer serializer = new XmlSerializer(typeof(HighScoreData)); serializer.Serialize(stream, data); } finally { // Close the file stream.Close(); } } /* Load highscores */ public static HighScoreData LoadHighScores(string filename) { HighScoreData data; // Get the path of the save game string fullpath = Path.Combine("highscores.dat"); // Open the file FileStream stream = File.Open(fullpath, FileMode.OpenOrCreate, FileAccess.Read); try { // Read the data from the file XmlSerializer serializer = new XmlSerializer(typeof(HighScoreData)); data = (HighScoreData)serializer.Deserialize(stream);//this is the line // where program gives an error } finally { // Close the file stream.Close(); } return (data); } /* Save player highscore when game ends */ private void SaveHighScore() { // Create the data to saved HighScoreData data = LoadHighScores(HighScoresFilename); int scoreIndex = -1; for (int i = 0; i < data.Count ; i++) { if (Score > data.Score[i]) { scoreIndex = i; break; } } if (scoreIndex > -1) { //New high score found ... do swaps for (int i = data.Count - 1; i > scoreIndex; i--) { data.PlayerName[i] = data.PlayerName[i - 1]; data.Score[i] = data.Score[i - 1]; } data.PlayerName[scoreIndex] = NAME; //Retrieve User Name Here data.Score[scoreIndex] = Score; // Retrieve score here SaveHighScores(data, HighScoresFilename); } } /* Iterate through data if highscore is called and make the string to be saved*/ public string makeHighScoreString() { // Create the data to save HighScoreData data2 = LoadHighScores(HighScoresFilename); // Create scoreBoardString string scoreBoardString = "Highscores:\n\n"; for (int i = 0; i<5;i++) { scoreBoardString = scoreBoardString + data2.PlayerName[i] + "-" + data2.Score[i] + "\n"; } return scoreBoardString; } when ill make this work i will start this code when i call game over (now i start it when i press some buttons, so i could test it faster) public void InputYourName() { if (result == null && !Guide.IsVisible) { string title = "Name"; string description = "Write your name in order to save your Score"; string defaultText = "Nick"; PlayerIndex playerIndex = new PlayerIndex(); result= Guide.BeginShowKeyboardInput(playerIndex, title, description, defaultText, null, null); // NAME = result.ToString(); } if (result != null && result.IsCompleted) { NAME = Guide.EndShowKeyboardInput(result); result = null; inputName = false; SaveHighScore(); } } this where i call output to the screen (ill call this in highscores meniu section when i am done with debugging) spriteBatch.DrawString(Font1, "" + makeHighScoreString(),new Vector2(500,200), Color.White); }

  Read the article

• Programming pattern to flatten deeply nested ajax callbacks?

  - by chiborg

  I've inherited JavaScript code where the success callback of an Ajax handler initiates another Ajax call where the success callback may or may not initiate another Ajax call. This leads to deeply nested anonymous functions. Maybe there is a clever programming pattern that avoids the deep-nesting and is more DRY. jQuery.extend(Application.Model.prototype, { process: function() { jQuery.ajax({ url:myurl1, dataType:'json', success:function(data) { // process data, then send it back jQuery.ajax({ url:myurl2, dataType:'json', success:function(data) { if(!data.ok) { jQuery.ajax({ url:myurl2, dataType:'json', success:mycallback }); } else { mycallback(data); } } }); } }); } });

  Read the article

• Unable to sign in. How to debug?

  - by Dmitriy Budnik

  I had to reboot system with reset button. After reboot I can't sign in. When I enter my password It seems like X-server just restarts. I can sing in as guest and also I can sign in in text TTY. Here is first 150 lines of my lightdm.log: [+0.04s] DEBUG: Logging to /var/log/lightdm/lightdm.log [+0.04s] DEBUG: Starting Light Display Manager 1.2.1, UID=0 PID=1070 [+0.04s] DEBUG: Loaded configuration from /etc/lightdm/lightdm.conf [+0.04s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager [+0.04s] DEBUG: Registered seat module xlocal [+0.04s] DEBUG: Registered seat module xremote [+0.04s] DEBUG: Adding default seat [+0.04s] DEBUG: Starting seat [+0.04s] DEBUG: Starting new display for automatic login as user dmytro [+0.04s] DEBUG: Starting local X display [+3.64s] DEBUG: X server :0 will replace Plymouth [+3.66s] DEBUG: Using VT 7 [+3.66s] DEBUG: Activating VT 7 [+3.66s] DEBUG: Logging to /var/log/lightdm/x-0.log [+3.66s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0 [+3.66s] DEBUG: Launching X Server [+3.66s] DEBUG: Launching process 1154: /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none [+3.66s] DEBUG: Waiting for ready signal from X server :0 [+3.66s] DEBUG: Acquired bus name org.freedesktop.DisplayManager [+3.66s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0 [+10.78s] DEBUG: Got signal 10 from process 1154 [+10.78s] DEBUG: Got signal from X server :0 [+10.78s] DEBUG: Stopping Plymouth, X server is ready [+10.80s] DEBUG: Connecting to XServer :0 [+10.80s] DEBUG: Automatically logging in user dmytro [+10.80s] DEBUG: Started session 1303 with service 'lightdm-autologin', username 'dmytro' [+13.22s] DEBUG: Session 1303 authentication complete with return value 0: Success [+13.26s] DEBUG: Autologin user dmytro authorized [+13.27s] DEBUG: Autologin using session ubuntu [+14.44s] DEBUG: Dropping privileges to uid 1000 [+14.48s] DEBUG: Restoring privileges [+14.49s] DEBUG: Dropping privileges to uid 1000 [+14.49s] DEBUG: Writing /home/dmytro/.dmrc [+14.61s] DEBUG: Restoring privileges [+14.81s] DEBUG: Starting session ubuntu as user dmytro [+14.81s] DEBUG: Session 1303 running command /usr/sbin/lightdm-session gnome-session --session=ubuntu [+15.76s] DEBUG: New display ready, switching to it [+15.76s] DEBUG: Activating VT 7 [+15.76s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session0 [+16.63s] DEBUG: Session 1303 exited with return value 0 [+16.63s] DEBUG: User session quit [+16.63s] DEBUG: Stopping display [+16.63s] DEBUG: Sending signal 15 to process 1154 [+17.19s] DEBUG: Process 1154 exited with return value 0 [+17.19s] DEBUG: X server stopped [+17.19s] DEBUG: Removing X server authority /var/run/lightdm/root/:0 [+17.19s] DEBUG: Releasing VT 7 [+17.19s] DEBUG: Display server stopped [+17.19s] DEBUG: Display stopped [+17.19s] DEBUG: Active display stopped, switching to greeter [+17.19s] DEBUG: Switching to greeter [+17.19s] DEBUG: Starting new display for greeter [+17.19s] DEBUG: Starting local X display [+17.19s] DEBUG: Using VT 7 [+17.19s] DEBUG: Logging to /var/log/lightdm/x-0.log [+17.19s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0 [+17.19s] DEBUG: Launching X Server [+17.19s] DEBUG: Launching process 1563: /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch [+17.19s] DEBUG: Waiting for ready signal from X server :0 [+17.48s] DEBUG: Got signal 10 from process 1563 [+17.48s] DEBUG: Got signal from X server :0 [+17.48s] DEBUG: Connecting to XServer :0 [+17.48s] DEBUG: Starting greeter [+17.48s] DEBUG: Started session 1575 with service 'lightdm', username 'lightdm' [+17.61s] DEBUG: Session 1575 authentication complete with return value 0: Success [+17.61s] DEBUG: Greeter authorized [+17.61s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log [+17.68s] DEBUG: Session 1575 running command /usr/lib/lightdm/lightdm-greeter-session /usr/sbin/unity-greeter [+20.86s] DEBUG: Greeter connected version=1.2.1 [+20.86s] DEBUG: Greeter connected, display is ready [+20.86s] DEBUG: New display ready, switching to it [+20.86s] DEBUG: Activating VT 7 [+20.86s] DEBUG: Stopping greeter display being switched from [+24.90s] DEBUG: Greeter start authentication for dmytro [+24.90s] DEBUG: Started session 1746 with service 'lightdm', username 'dmytro' [+25.10s] DEBUG: Session 1746 got 1 message(s) from PAM [+25.10s] DEBUG: Prompt greeter with 1 message(s) [+31.87s] DEBUG: Continue authentication [+33.75s] DEBUG: Session 1746 authentication complete with return value 7: Authentication failure [+33.75s] DEBUG: Authenticate result for user dmytro: Authentication failure [+33.75s] DEBUG: Greeter start authentication for dmytro [+33.75s] DEBUG: Session 1746: Sending SIGTERM [+33.75s] DEBUG: Started session 2264 with service 'lightdm', username 'dmytro' [+33.75s] DEBUG: Session 2264 got 1 message(s) from PAM [+33.75s] DEBUG: Prompt greeter with 1 message(s) [+36.41s] DEBUG: Continue authentication [+36.53s] DEBUG: Session 2264 authentication complete with return value 0: Success [+36.53s] DEBUG: Authenticate result for user dmytro: Success [+36.54s] DEBUG: User dmytro authorized [+36.54s] DEBUG: Greeter requests session ubuntu [+36.54s] DEBUG: Using session ubuntu [+36.54s] DEBUG: Stopping greeter [+36.54s] DEBUG: Session 1575: Sending SIGTERM [+37.41s] DEBUG: Greeter closed communication channel [+37.41s] DEBUG: Session 1575 exited with return value 0 [+37.41s] DEBUG: Greeter quit [+37.42s] DEBUG: Dropping privileges to uid 1000 [+37.42s] DEBUG: Restoring privileges [+37.43s] DEBUG: Dropping privileges to uid 1000 [+37.43s] DEBUG: Writing /home/dmytro/.dmrc [+38.35s] DEBUG: Restoring privileges [+40.37s] DEBUG: Starting session ubuntu as user dmytro [+40.37s] DEBUG: Session 2264 running command /usr/sbin/lightdm-session gnome-session --session=ubuntu [+40.39s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session1 [+50.78s] DEBUG: Session 2264 exited with return value 0 [+50.78s] DEBUG: User session quit [+50.78s] DEBUG: Stopping display [+50.78s] DEBUG: Sending signal 15 to process 1563 [+51.53s] DEBUG: Process 1563 exited with return value 0 [+51.53s] DEBUG: X server stopped [+51.53s] DEBUG: Removing X server authority /var/run/lightdm/root/:0 [+51.53s] DEBUG: Releasing VT 7 [+51.53s] DEBUG: Display server stopped [+51.53s] DEBUG: Display stopped [+51.53s] DEBUG: Active display stopped, switching to greeter [+51.53s] DEBUG: Switching to greeter [+51.53s] DEBUG: Starting new display for greeter [+51.53s] DEBUG: Starting local X display [+51.53s] DEBUG: Using VT 7 [+51.53s] DEBUG: Logging to /var/log/lightdm/x-0.log [+51.53s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0 [+51.53s] DEBUG: Launching X Server [+51.53s] DEBUG: Launching process 2894: /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch [+51.53s] DEBUG: Waiting for ready signal from X server :0 [+51.75s] DEBUG: Got signal 10 from process 2894 [+51.75s] DEBUG: Got signal from X server :0 [+51.75s] DEBUG: Connecting to XServer :0 [+51.75s] DEBUG: Starting greeter [+51.75s] DEBUG: Started session 2898 with service 'lightdm', username 'lightdm' [+51.76s] DEBUG: Session 2898 authentication complete with return value 0: Success [+51.76s] DEBUG: Greeter authorized [+51.76s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log [+51.76s] DEBUG: Session 2898 running command /usr/lib/lightdm/lightdm-greeter-session /usr/sbin/unity-greeter [+53.26s] DEBUG: Greeter connected version=1.2.1 [+53.26s] DEBUG: Greeter connected, display is ready [+53.26s] DEBUG: New display ready, switching to it [+53.26s] DEBUG: Activating VT 7 [+53.26s] DEBUG: Stopping greeter display being switched from [+54.17s] DEBUG: Greeter start authentication for dmytro [+54.17s] DEBUG: Started session 3152 with service 'lightdm', username 'dmytro' [+54.18s] DEBUG: Session 3152 got 1 message(s) from PAM [+54.18s] DEBUG: Prompt greeter with 1 message(s) [+58.61s] DEBUG: Continue authentication [+58.65s] DEBUG: Session 3152 authentication complete with return value 0: Success [+58.65s] DEBUG: Authenticate result for user dmytro: Success [+58.66s] DEBUG: User dmytro authorized [+58.66s] DEBUG: Greeter requests session ubuntu [+58.66s] DEBUG: Using session ubuntu [+58.66s] DEBUG: Stopping greeter [+58.66s] DEBUG: Session 2898: Sending SIGTERM How can I fix it? What other .log files could possibly give me a clue? Update: Possibly it's duplicate of Desktop login fails, terminal works

  Read the article

• HttpPost works in Java project, not in Android

  - by dave.c

  I've written some code for my Android device to login to a web site over https and parse some data out of the resulting pages. An HttpGet happens first to get some info needed for login, then an HttpPost to do the actual login process. The code below works great in a Java project within Eclipse which has the following Jar files on the build path: httpcore-4.1-beta2.jar, httpclient-4.1-alpha2.jar, httpmime-4.1-alpha2.jar, commons-logging-1.1.1.jar. public static MyBean gatherData(String username, String password) { MyBean myBean = new MyBean(); try { HttpResponse response = doHttpGet(URL_PAGE_LOGIN, null, null); System.out.println("Got login page"); String content = EntityUtils.toString(response.getEntity()); String token = ContentParser.getToken(content); String cookie = getCookie(response); System.out.println("Performing login"); System.out.println("token = "+token +" || cookie = "+cookie); response = doLoginPost(username,password,cookie, token); int respCode = response.getStatusLine().getStatusCode(); if (respCode != 302) { System.out.println("ERROR: not a 302 redirect!: code is \""+ respCode+"\""); if (respCode == 200) { System.out.println(getHeaders(response)); System.out.println(EntityUtils.toString(response.getEntity()).substring(0, 500)); } } else { System.out.println("Logged in OK, loading account home"); // redirect handler and rest of parse removed } }catch (Exception e) { System.out.println("ERROR in gatherdata: "+e.toString()); e.printStackTrace(); } return myBean; } private static HttpResponse doHttpGet(String url, String cookie, String referrer) { try { HttpClient client = new DefaultHttpClient(); client.getParams().setParameter(CoreProtocolPNames.PROTOCOL_VERSION, HttpVersion.HTTP_1_1); client.getParams().setParameter(CoreProtocolPNames.HTTP_CONTENT_CHARSET, "UTF-8"); HttpGet httpGet = new HttpGet(url); httpGet.getParams().setParameter(CoreProtocolPNames.PROTOCOL_VERSION, HttpVersion.HTTP_1_1); httpGet.setHeader(HEADER_USER_AGENT,HEADER_USER_AGENT_VALUE); if (referrer != null && !referrer.equals("")) httpGet.setHeader(HEADER_REFERER,referrer); if (cookie != null && !cookie.equals("")) httpGet.setHeader(HEADER_COOKIE,cookie); return client.execute(httpGet); } catch (Exception e) { e.printStackTrace(); throw new ConnectException("Failed to read content from response"); } } private static HttpResponse doLoginPost(String username, String password, String cookie, String token) throws ClientProtocolException, IOException { try { HttpClient client = new DefaultHttpClient(); client.getParams().setParameter(CoreProtocolPNames.PROTOCOL_VERSION, HttpVersion.HTTP_1_1); client.getParams().setParameter(CoreProtocolPNames.HTTP_CONTENT_CHARSET, "UTF-8"); HttpPost post = new HttpPost(URL_LOGIN_SUBMIT); post.getParams().setParameter(CoreProtocolPNames.PROTOCOL_VERSION, HttpVersion.HTTP_1_1); post.setHeader(HEADER_USER_AGENT,HEADER_USER_AGENT_VALUE); post.setHeader(HEADER_REFERER, URL_PAGE_LOGIN); post.setHeader(HEADER_COOKIE, cookie); post.setHeader("Content-Type","application/x-www-form-urlencoded"); List<NameValuePair> formParams = new ArrayList<NameValuePair>(); formParams.add(new BasicNameValuePair("org.apache.struts.taglib.html.TOKEN", token)); formParams.add(new BasicNameValuePair("showLogin", "true")); formParams.add(new BasicNameValuePair("upgrade", "")); formParams.add(new BasicNameValuePair("username", username)); formParams.add(new BasicNameValuePair("password", password)); formParams.add(new BasicNameValuePair("submit", "Secure+Log+in")); UrlEncodedFormEntity entity = new UrlEncodedFormEntity(formParams,HTTP.UTF_8); post.setEntity(entity); return client.execute(post); } catch (Exception e) { e.printStackTrace(); throw new ConnectException("ERROR in doLoginPost(): "+e.getMessage()); } } The server (which is not under my control) returns a 302 redirect when the login was successful, and 200 if it fails and re-loads the login page. When run with the above Jar files I get the 302 redirect, however if I run the exact same code from an Android project with the 1.6 Android Jar file on the build path I get the 200 response from the server. I get the same 200 response when running the code on my 2.2 device. My android application has internet permissions, and the HttpGet works fine. I'm assuming that the problem lies in the fact that HttpPost (or some other class) is different in some significant way between the Android Jar version and the newer Apache versions. I've tried adding the Apache libraries to the build path of the Android project, but due to the duplicate classes I get messages like: INFO/dalvikvm(390): DexOpt: not resolving ambiguous class 'Lorg/apache/http/impl/client/DefaultHttpClient;' in the log. I've also tried using a MultipartEntity instead of the UrlEncodedFormEntity but I get the same 200 result. So, I have a few questions: - Can I force the code running under android to use the newer Apache libraries in preference to the Android versions? - If not, does anyone have any ideas how can I alter my code so that it works with the Android Jar? - Are there any other, totally different approaches to doing an HttpPost in Android? - Any other ideas? I've read a lot of posts and code but I'm not getting anywhere. I've been stuck on this for a couple of days and I'm at a loss how to get the thing to work, so I'll try anything at this point. Thanks in advance.

  Read the article

• Cobol: science and fiction

  - by user847

  There are a few threads about the relevance of the Cobol programming language on this forum, e.g. this thread links to a collection of them. What I am interested in here is a frequently repeated claim based on a study by Gartner from 1997: that there were around 200 billion lines of code in active use at that time! I would like to ask some questions to verify or falsify a couple of related points. My goal is to understand if this statement has any truth to it or if it is totally unrealistic. I apologize in advance for being a little verbose in presenting my line of thought and my own opinion on the things I am not sure about, but I think it might help to put things in context and thus highlight any wrong assumptions and conclusions I have made. Sometimes, the "200 billion lines" number is accompanied by the added claim that this corresponded to 80% of all programming code in any language in active use. Other times, the 80% merely refer to so-called "business code" (or some other vague phrase hinting that the reader is not to count mainstream software, embedded systems or anything else where Cobol is practically non-existent). In the following I assume that the code does not include double-counting of multiple installations of the same software (since that is cheating!). In particular in the time prior to the y2k problem, it has been noted that a lot of Cobol code is already 20 to 30 years old. That would mean it was written in the late 60ies and 70ies. At that time, the market leader was IBM with the IBM/370 mainframe. IBM has put up a historical announcement on his website quoting prices and availability. According to the sheet, prices are about one million dollars for machines with up to half a megabyte of memory. Question 1: How many mainframes have actually been sold? I have not found any numbers for those times; the latest numbers are for the year 2000, again by Gartner. :^( I would guess that the actual number is in the hundreds or the low thousands; if the market size was 50 billion in 2000 and the market has grown exponentially like any other technology, it might have been merely a few billions back in 1970. Since the IBM/370 was sold for twenty years, twenty times a few thousand will result in a couple of ten-thousands of machines (and that is pretty optimistic)! Question 2: How large were the programs in lines of code? I don't know how many bytes of machine code result from one line of source code on that architecture. But since the IBM/370 was a 32-bit machine, any address access must have used 4 bytes plus instruction (2, maybe 3 bytes for that?). If you count in operating system and data for the program, how many lines of code would have fit into the main memory of half a megabyte? Question 3: Was there no standard software? Did every single machine sold run a unique hand-coded system without any standard software? Seriously, even if every machine was programmed from scratch without any reuse of legacy code (wait ... didn't that violate one of the claims we started from to begin with???) we might have O(50,000 l.o.c./machine) * O(20,000 machines) = O(1,000,000,000 l.o.c.). That is still far, far, far away from 200 billion! Am I missing something obvious here? Question 4: How many programmers did we need to write 200 billion lines of code? I am really not sure about this one, but if we take an average of 10 l.o.c. per day, we would need 55 million man-years to achieve this! In the time-frame of 20 to 30 years this would mean that there must have existed two to three million programmers constantly writing, testing, debugging and documenting code. That would be about as many programmers as we have in China today, wouldn't it? Question 5: What about the competition? So far, I have come up with two things here: 1) IBM had their own programming language, PL/I. Above I have assumed that the majority of code has been written exclusively using Cobol. However, all other things being equal I wonder if IBM marketing had really pushed their own development off the market in favor of Cobol on their machines. Was there really no relevant code base of PL/I? 2) Sometimes (also on this board in the thread quoted above) I come across the claim that the "200 billion lines of code" are simply invisible to anybody outside of "governments, banks ..." (and whatnot). Actually, the DoD had funded their own language in order to increase cost effectiveness and reduce the proliferation of programming language. This lead to their use of Ada. Would they really worry about having so many different programming languages if they had predominantly used Cobol? If there was any language running on "government and military" systems outside the perception of mainstream computing, wouldn't that language be Ada? I hope someone can point out any flaws in my assumptions and/or conclusions and shed some light on whether the above claim has any truth to it or not.

  Read the article

• JTabbedPane: only first tab is drawn, the second is always empty (newbie Q)

  - by paul

  I created a very simple JTabbedPane by first creating an empty JTabbedPane object, then 2 JPanels that I later add. Each JPanel is holding a object that extends JButton and implements MouseListener. Each of these holds a different image loaded from a file; the image is held locally as a buffered image and as an image icon, etc., all of which works great. The point of all that is to allow resizing of the image when the button is resized (using getscaledinstance()), because the panel is resized, because the JTabbedPane is resized, etc., within the JFrame that holds everything. I override paintComponent() to accomplish this in the class that extends JButton. I am using MigLayout Manager, and all is well on that front controlling layout constraints, growing, filling, initial sizes, preferred sizes, etc. The images the buttons hold are of different sizes and proportions, but this caused no trouble before. Up until 2 days ago everything worked fairly well. I made some changes trying to tweak some resizing issues as I was picking up MigLayout manager. At the time I was playing around with setting various min, max, and preferred sizes using the methods provided for by the components, not the layout manager. I also fooled a bit with pack(), validate(), visible(), opaque() etc., and yes I read the article about Swing and AWT painting here: http://java.sun.com/products/jfc/tsc/articles/painting/ , and I switched to relying more and more on MigLayout. On an unrelated note, it appears JFrame's do not honor maxsize? Somehow, today, with and without using any of these methods provided by swing, with or without using MigLayout manager to handle some of these matters instead, I now have a JTabbedPane that correctly displays the FIRST JPanel I add, but NOT THE SECOND JPanel--which, while present as a tab--does not show when selected. I have switched the order of which panel is added first, and this still holds true regardless of which JPanel I add first, telling me the JPanels are ok, and the problem is most likely in the JTabbedPane. I click on the second tab, the JTabbedPane switches, but I have what appears to be a blank button in the JPanel. A few console system-out statements reveal the following: a) that the second panel and its button are constructed b) no mouse events are being captured when I click on where the second panel and button should reside, as if it didn't exist at that point; c) when I switch to the second tab, the overrided paintComponent() method of the button within that second JPanel is never called, so it is in fact never being painted despite the tab in which it resides becoming visible; d) the JTabbpedPane getComponentCount() returns a correct value of 2 after adding the 2nd panel; e) MigLayout manager actually rocks, but I digress... I cannot now revert to my older code, and despite my best efforts to undo whatever changes caused this, I cannot fix my new problem. I've commented out everything but the most essential calls: constructors for each object--with MigLayout; add() for placing the buttons on the panels using string-arguments appropriate for MigLayout; add() for placing the panels on the JTabbedPane, also with MigLayout string arguments; setting the default op on close for the JFrame; and setting the JFrame visible. This means I do not fiddle with optimization settings, double buffering settings, opaque settings, but leave them as default, and still, no fix; the second panel will not show itself. Each panel, I should add, when it is the first to be loaded, works fine, again re-affirming that the panels and buttons are themselves ok. Here is part of what I am doing: //Note: BuildaButton is a class that merely constructs my instances File f = new File("/foo.jpg"); button1 = new BuildaButton().BuildaButton(f).buildfoo1Button(); f = new File("/foo2.jpg"); button2 = new BuildaButton().BuildaButton(f).buildfoo2Button(); MigLayout ml = new MigLayout("wrap 1", "[fill, grow]0[fill, grow]", "[fill, grow]0[fill, grow]"); MigLayout ml2 = new MigLayout("wrap 2", "[fill, grow]5[fill, grow]", "[fill, grow]0[fill, grow]"); foo1panel = new JPanel(ml); foo1panel.add(button1, "w 234:945:, h 200:807:"); foo2panel = new JPanel(ml); foo2panel.add(button2, "w 186:752:, h 200:807:"); tabs.add("foo1", foo1panel); tabs.add("foo2", foo2panel); System.out.println("contents of tabs: " + tabs.getComponentCount() + " elements"); mainframe.setLayout(ml2); mainframe.setMinimumSize(new Dimension(850,800)); mainframe.add(tabs, "w 600:800:, h 780:780:"); //controlpanel is a still blank jpanel that holds nothing--it is a space holder for now & will be utilized mainframe.add(controlpanel, "w 200:200:200, h 780:780:"); mainframe.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); mainframe.setVisible(true); Thank you in advance for any help you can give.

  Read the article

• jQuery jqXHR - cancel chained calls, trigger error chain

  - by m0sa

  I am creating a ajax utility for interfacing with my server methods. I would like to leverage jQuery 1.5+ deferred methods from the object returned from the jQuery.ajax() call. The situation is following. The serverside method always returns a JSON object: { success: true|false, data: ... } The client-side utility initiates the ajax call like this var jqxhr = $.ajax({ ... }); And the problem area: jqxhr.success(function(data, textStatus, xhr) { if(!data || !data.success) { ???? // abort processing, trigger error } }); return jqxhr; // return to caller so he can attach his own handlers So the question is how to cancel invocation of all the callers appended success callbacks an trigger his error handler in the place mentioned with ???? ? The documentation says the deferred function invocation lists are FIFO, so my success handler is definitely the first one.

  Read the article

• How to do elif statments more elegantly if appending to array in python

  - by user1741339

  I am trying to do a more elegant version of this code. This just basically appends a string to categorynumber depending on the number. Would appreciate any help. number = [100,150,200,500] categoryNumber = [] for i in range (0,len(number)): if (number [i] >=1000): categoryNumber.append('number > 1000') elif (number [i] >=200): categoryNumber.append('200 < number < 300') elif (number [i] >=100): categoryNumber.append('100 < number < 200') elif (number [i] >=50): categoryNumber.append('50 < number < 100') elif (number [i] < 50): categoryNumber.append('number < 50') for i in range(0,len(categoryNumber)): print i

  Read the article

• Best way to notify several java applets/applications of a change on a server

  - by Dustin

  I need to know the best (fastest) way to have a server (preferably a php based one, but a jsp/servlet one could be set up as well using google app engine) notify several java applets/applications that a change has occurred to the data. The way i am picturing this to work will be very similar to that of the way i think an online java game (like Runescape) works User 1: Changes data on server. Server: returns success to User 1, notifies connected computers of change. Connected Computer 1: processes change, returns success to server. Connected Computer 2: processes change, returns success to server. Connected Computer 3: processes change, returns success to server. Connected Computer 4: processes change, returns success to server. I am hoping to have this entire process complete in half a second, and not involve polling as there will be long durations of nothing, followed by a sudden moment where 4 events happen in succession.

  Read the article

• javascript / jQuery variable problem (possibly caching issue)

  - by waitinforatrain

  Standard AJAX query with jQuery: var globalTitle = ""; var pages = ["a", "b", "c"]; for (var i = 0; i < pages.length; i++) { createpage(pages[i]); } function createpage(title) { globalTitle=title; console.log (globalTitle); //All looks good here $.ajax({ url: "createpage.php?id=" + title, context: document.body, success: success }); } The success() function uses globaltitle which is why I had to declare it global. In the success() function though console.log (globalTitle); constantly gives me "a". It's like the variable is assigned but is then cached every time success() is called. Happens in FF 4 and Chrome 8. Any thoughts?

  Read the article

• A View from the Top – Jan Ackerman (VP APAC Recruiting)

  - by user769227

  This week, Headhunt Magazine in Singapore, took the opportunity to publish an interview with Jan Ackerman who is Vice President for Recruitment for Asia Pacific here at Oracle. The link to the online interview can be found here. Below is the interview in full that was published in Headhunt Magazine.  A View from the Top – Jan Ackerman Written by HeadHunt on August 16, 2012 · Leave a Comment By Susheela Menon Jan Ackerman is the Vice President for Recruiting in Asia Pacific and Japan at Oracle. Which particular personal trait do you attribute your professional success to? Perseverance has been the most important trait that has attributed to my professional success. Endurance and perseverance combined to win in the end has always been a great credo. I find that this trait carries through in my professional as well as my personal life. I enjoy sport fishing and find that perseverance with a great deal of patience in this hobby is critical to the overall enjoyment and success in this sporting activity. In the same way, this doggedness – steadfastness with persistence – and tenacity toward an unyielding course of action has served me well in reaching goals and thus greater success. What’s the biggest challenge you have faced in your career so far? I have to constantly keep pace with ever changing technology in my career. The industry changes rapidly and requires me to stay on top of the latest trends and advancements. Outside of work, I like to develop software as a hobby and in order to ensure that what I am developing will meet what the business needs, I have to continually innovate and stay current on the latest trends in the industry to deliver a solution that will delight the end- user. Best career advice you have ever received. Always be forthright and honest with your customers and peers; mixed with a “Can Do” attitude, a great and fulfilling career can be yours to have and hold. What makes Oracle a great place to be in? The freedom to innovate and pave new avenues of success is one of the greatest things about working here at Oracle. We are always looking to grow and improve our business for our customers and we are always adapting to present and future industry demands. This means we are always looking to change, to perform better and to do things differently. All these create a culture and spirit of innovation and success. What motivates you to be in the HR sector? I really like working with and helping people. HR is all about “the people” in the organisation, and staying focused every day on making things better for the Oracle team gives me a great deal of happiness. Describe your leadership style. I am very direct and goal- oriented. I provide ideas and guidance and then give the team all the freedom they need to reach a successful outcome. I can also be a very “roll up your sleeves” kind of manager when the task needs a bit of a push. What’s the biggest business challenge you see in your industry right now? The ability to keep pace with all the convergence in the industry and to continue to stay focused on delivering top talent to serve Oracle’s customers well. Our unique Recruiting Model has served us well in meeting these needs. We are well-placed in this goal and look forward to maintain Oracle’s leadership role in the industry.

  Read the article

• SPARC T5-4 LDoms for RAC and WebLogic Clusters

  - by Jeff Taylor-Oracle

  I wanted to use two Oracle SPARC T5-4 servers to simultaneously host both Oracle RAC and a WebLogic Server Cluster. I chose to use Oracle VM Server for SPARC to create a cluster like this: There are plenty of trade offs and decisions that need to be made, for example: Rather than configuring the system by hand, you might want to use an Oracle SuperCluster T5-8 My configuration is similar to jsavit's: Availability Best Practices - Example configuring a T5-8 but I chose to ignore some of the advice. Maybe I should have included an  alternate service domain, but I decided that I already had enough redundancy Both Oracle SPARC T5-4 servers were to be configured like this: Cntl 0.25  4  64GB                     App LDom                    2.75 CPU's                                        44 cores                                          704 GB              DB LDom      One CPU         16 cores         256 GB   The systems started with everything in the primary domain: # ldm list NAME             STATE      FLAGS   CONS    VCPU  MEMORY   UTIL  NORM  UPTIME primary          active     -n-c--  UART    512   1023G    0.0%  0.0%  11m # ldm list-spconfig factory-default [current] primary # ldm list -o core,memory,physio NAME              primary           CORE     CID    CPUSET     0      (0, 1, 2, 3, 4, 5, 6, 7)     1      (8, 9, 10, 11, 12, 13, 14, 15)     2      (16, 17, 18, 19, 20, 21, 22, 23) -- SNIP     62     (496, 497, 498, 499, 500, 501, 502, 503)     63     (504, 505, 506, 507, 508, 509, 510, 511) MEMORY     RA               PA               SIZE                 0x30000000       0x30000000       255G     0x80000000000    0x80000000000    256G     0x100000000000   0x100000000000   256G     0x180000000000   0x180000000000   256G # Give this memory block to the DB LDom IO     DEVICE                           PSEUDONYM        OPTIONS     pci@300                          pci_0                pci@340                          pci_1                pci@380                          pci_2                pci@3c0                          pci_3                pci@400                          pci_4                pci@440                          pci_5                pci@480                          pci_6                pci@4c0                          pci_7                pci@300/pci@1/pci@0/pci@6        /SYS/RCSA/PCIE1     pci@300/pci@1/pci@0/pci@c        /SYS/RCSA/PCIE2     pci@300/pci@1/pci@0/pci@4/pci@0/pci@c /SYS/MB/SASHBA0     pci@300/pci@1/pci@0/pci@4/pci@0/pci@8 /SYS/RIO/NET0        pci@340/pci@1/pci@0/pci@6        /SYS/RCSA/PCIE3     pci@340/pci@1/pci@0/pci@c        /SYS/RCSA/PCIE4     pci@380/pci@1/pci@0/pci@a        /SYS/RCSA/PCIE9     pci@380/pci@1/pci@0/pci@4        /SYS/RCSA/PCIE10     pci@3c0/pci@1/pci@0/pci@e        /SYS/RCSA/PCIE11     pci@3c0/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE12     pci@400/pci@1/pci@0/pci@e        /SYS/RCSA/PCIE5     pci@400/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE6     pci@440/pci@1/pci@0/pci@e        /SYS/RCSA/PCIE7     pci@440/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE8     pci@480/pci@1/pci@0/pci@a        /SYS/RCSA/PCIE13     pci@480/pci@1/pci@0/pci@4        /SYS/RCSA/PCIE14     pci@4c0/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE15     pci@4c0/pci@1/pci@0/pci@4        /SYS/RCSA/PCIE16     pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c /SYS/MB/SASHBA1     pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4 /SYS/RIO/NET2    Added an additional service processor configuration: # ldm add-spconfig split # ldm list-spconfig factory-default primary split [current] And removed many of the resources from the primary domain: # ldm start-reconf primary # ldm set-core 4 primary # ldm set-memory 32G primary # ldm rm-io pci@340 primary # ldm rm-io pci@380 primary # ldm rm-io pci@3c0 primary # ldm rm-io pci@400 primary # ldm rm-io pci@440 primary # ldm rm-io pci@480 primary # ldm rm-io pci@4c0 primary # init 6 Needed to add resources to the guest domains: # ldm add-domain db # ldm set-core cid=`seq -s"," 48 63` db # ldm add-memory mblock=0x180000000000:256G db # ldm add-io pci@480 db # ldm add-io pci@4c0 db # ldm add-domain app # ldm set-core 44 app # ldm set-memory 704G  app # ldm add-io pci@340 app # ldm add-io pci@380 app # ldm add-io pci@3c0 app # ldm add-io pci@400 app # ldm add-io pci@440 app Needed to set up services: # ldm add-vds primary-vds0 primary # ldm add-vcc port-range=5000-5100 primary-vcc0 primary Needed to add a virtual network port for the WebLogic application domain: # ipadm NAME              CLASS/TYPE STATE        UNDER      ADDR lo0               loopback   ok           --         --    lo0/v4         static     ok           --         ...    lo0/v6         static     ok           --         ... net0              ip         ok           --         ...    net0/v4        static     ok           --         xxx.xxx.xxx.xxx/24    net0/v6        addrconf   ok           --         ....    net0/v6        addrconf   ok           --         ... net8              ip         ok           --         --    net8/v4        static     ok           --         ... # dladm show-phys LINK              MEDIA                STATE      SPEED  DUPLEX    DEVICE net1              Ethernet             unknown    0      unknown   ixgbe1 net0              Ethernet             up         1000   full      ixgbe0 net8              Ethernet             up         10     full      usbecm2 # ldm add-vsw net-dev=net0 primary-vsw0 primary # ldm add-vnet vnet1 primary-vsw0 app Needed to add a virtual disk to the WebLogic application domain: # format Searching for disks...done AVAILABLE DISK SELECTIONS:        0. c0t5000CCA02505F874d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB>           /scsi_vhci/disk@g5000cca02505f874           /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD0/disk        1. c0t5000CCA02506C468d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB>           /scsi_vhci/disk@g5000cca02506c468           /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD1/disk        2. c0t5000CCA025067E5Cd0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB>           /scsi_vhci/disk@g5000cca025067e5c           /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD2/disk        3. c0t5000CCA02506C258d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB>           /scsi_vhci/disk@g5000cca02506c258           /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD3/disk Specify disk (enter its number): ^C # ldm add-vdsdev /dev/dsk/c0t5000CCA02506C468d0s2 HDD1@primary-vds0 # ldm add-vdisk HDD1 HDD1@primary-vds0 app Add some additional spice to the pot: # ldm set-variable auto-boot\\?=false db # ldm set-variable auto-boot\\?=false app # ldm set-var boot-device=HDD1 app Bind the logical domains: # ldm bind db # ldm bind app At the end of the process, the system is set up like this: # ldm list -o core,memory,physio NAME             primary          CORE     CID    CPUSET     0      (0, 1, 2, 3, 4, 5, 6, 7)     1      (8, 9, 10, 11, 12, 13, 14, 15)     2      (16, 17, 18, 19, 20, 21, 22, 23)     3      (24, 25, 26, 27, 28, 29, 30, 31) MEMORY     RA               PA               SIZE                0x30000000       0x30000000       32G IO     DEVICE                           PSEUDONYM        OPTIONS     pci@300                          pci_0               pci@300/pci@1/pci@0/pci@6        /SYS/RCSA/PCIE1     pci@300/pci@1/pci@0/pci@c        /SYS/RCSA/PCIE2     pci@300/pci@1/pci@0/pci@4/pci@0/pci@c /SYS/MB/SASHBA0     pci@300/pci@1/pci@0/pci@4/pci@0/pci@8 /SYS/RIO/NET0   ------------------------------------------------------------------------------ NAME             app              CORE     CID    CPUSET     4      (32, 33, 34, 35, 36, 37, 38, 39)     5      (40, 41, 42, 43, 44, 45, 46, 47)     6      (48, 49, 50, 51, 52, 53, 54, 55)     7      (56, 57, 58, 59, 60, 61, 62, 63)     8      (64, 65, 66, 67, 68, 69, 70, 71)     9      (72, 73, 74, 75, 76, 77, 78, 79)     10     (80, 81, 82, 83, 84, 85, 86, 87)     11     (88, 89, 90, 91, 92, 93, 94, 95)     12     (96, 97, 98, 99, 100, 101, 102, 103)     13     (104, 105, 106, 107, 108, 109, 110, 111)     14     (112, 113, 114, 115, 116, 117, 118, 119)     15     (120, 121, 122, 123, 124, 125, 126, 127)     16     (128, 129, 130, 131, 132, 133, 134, 135)     17     (136, 137, 138, 139, 140, 141, 142, 143)     18     (144, 145, 146, 147, 148, 149, 150, 151)     19     (152, 153, 154, 155, 156, 157, 158, 159)     20     (160, 161, 162, 163, 164, 165, 166, 167)     21     (168, 169, 170, 171, 172, 173, 174, 175)     22     (176, 177, 178, 179, 180, 181, 182, 183)     23     (184, 185, 186, 187, 188, 189, 190, 191)     24     (192, 193, 194, 195, 196, 197, 198, 199)     25     (200, 201, 202, 203, 204, 205, 206, 207)     26     (208, 209, 210, 211, 212, 213, 214, 215)     27     (216, 217, 218, 219, 220, 221, 222, 223)     28     (224, 225, 226, 227, 228, 229, 230, 231)     29     (232, 233, 234, 235, 236, 237, 238, 239)     30     (240, 241, 242, 243, 244, 245, 246, 247)     31     (248, 249, 250, 251, 252, 253, 254, 255)     32     (256, 257, 258, 259, 260, 261, 262, 263)     33     (264, 265, 266, 267, 268, 269, 270, 271)     34     (272, 273, 274, 275, 276, 277, 278, 279)     35     (280, 281, 282, 283, 284, 285, 286, 287)     36     (288, 289, 290, 291, 292, 293, 294, 295)     37     (296, 297, 298, 299, 300, 301, 302, 303)     38     (304, 305, 306, 307, 308, 309, 310, 311)     39     (312, 313, 314, 315, 316, 317, 318, 319)     40     (320, 321, 322, 323, 324, 325, 326, 327)     41     (328, 329, 330, 331, 332, 333, 334, 335)     42     (336, 337, 338, 339, 340, 341, 342, 343)     43     (344, 345, 346, 347, 348, 349, 350, 351)     44     (352, 353, 354, 355, 356, 357, 358, 359)     45     (360, 361, 362, 363, 364, 365, 366, 367)     46     (368, 369, 370, 371, 372, 373, 374, 375)     47     (376, 377, 378, 379, 380, 381, 382, 383) MEMORY     RA               PA               SIZE                0x30000000       0x830000000      192G     0x4000000000     0x80000000000    256G     0x8080000000     0x100000000000   256G IO     DEVICE                           PSEUDONYM        OPTIONS     pci@340                          pci_1               pci@380                          pci_2               pci@3c0                          pci_3               pci@400                          pci_4               pci@440                          pci_5               pci@340/pci@1/pci@0/pci@6        /SYS/RCSA/PCIE3     pci@340/pci@1/pci@0/pci@c        /SYS/RCSA/PCIE4     pci@380/pci@1/pci@0/pci@a        /SYS/RCSA/PCIE9     pci@380/pci@1/pci@0/pci@4        /SYS/RCSA/PCIE10     pci@3c0/pci@1/pci@0/pci@e        /SYS/RCSA/PCIE11     pci@3c0/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE12     pci@400/pci@1/pci@0/pci@e        /SYS/RCSA/PCIE5     pci@400/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE6     pci@440/pci@1/pci@0/pci@e        /SYS/RCSA/PCIE7     pci@440/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE8 ------------------------------------------------------------------------------ NAME             db               CORE     CID    CPUSET     48     (384, 385, 386, 387, 388, 389, 390, 391)     49     (392, 393, 394, 395, 396, 397, 398, 399)     50     (400, 401, 402, 403, 404, 405, 406, 407)     51     (408, 409, 410, 411, 412, 413, 414, 415)     52     (416, 417, 418, 419, 420, 421, 422, 423)     53     (424, 425, 426, 427, 428, 429, 430, 431)     54     (432, 433, 434, 435, 436, 437, 438, 439)     55     (440, 441, 442, 443, 444, 445, 446, 447)     56     (448, 449, 450, 451, 452, 453, 454, 455)     57     (456, 457, 458, 459, 460, 461, 462, 463)     58     (464, 465, 466, 467, 468, 469, 470, 471)     59     (472, 473, 474, 475, 476, 477, 478, 479)     60     (480, 481, 482, 483, 484, 485, 486, 487)     61     (488, 489, 490, 491, 492, 493, 494, 495)     62     (496, 497, 498, 499, 500, 501, 502, 503)     63     (504, 505, 506, 507, 508, 509, 510, 511) MEMORY     RA               PA               SIZE                0x80000000       0x180000000000   256G IO     DEVICE                           PSEUDONYM        OPTIONS     pci@480                          pci_6               pci@4c0                          pci_7               pci@480/pci@1/pci@0/pci@a        /SYS/RCSA/PCIE13     pci@480/pci@1/pci@0/pci@4        /SYS/RCSA/PCIE14     pci@4c0/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE15     pci@4c0/pci@1/pci@0/pci@4        /SYS/RCSA/PCIE16     pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c /SYS/MB/SASHBA1     pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4 /SYS/RIO/NET2   Start the domains: # ldm start app LDom app started # ldm start db LDom db started Make sure to start the vntsd service that was created, above. # svcs -a | grep ldo disabled        8:38:38 svc:/ldoms/vntsd:default online          8:38:58 svc:/ldoms/agents:default online          8:39:25 svc:/ldoms/ldmd:default # svcadm enable vntsd Now use the MAC address to configure the Solaris 11 Automated Installation. Database Logical Domain # telnet localhost 5000 {0} ok devalias screen                   /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@7/display@0 disk7                    /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p3 disk6                    /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p2 disk5                    /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p1 disk4                    /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p0 scsi1                    /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0 net3                     /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0,1 net2                     /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0 virtual-console          /virtual-devices/console@1 name                     aliases {0} ok boot net2 Boot device: /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0  File and args: 1000 Mbps full duplex Link up Requesting Internet Address for xx:xx:xx:xx:xx:xx Requesting Internet Address for xx:xx:xx:xx:xx:xx WLS Logical Domain # telnet localhost 5001 {0} ok devalias hdd1                     /virtual-devices@100/channel-devices@200/disk@0 vnet1                    /virtual-devices@100/channel-devices@200/network@0 net                      /virtual-devices@100/channel-devices@200/network@0 disk                     /virtual-devices@100/channel-devices@200/disk@0 virtual-console          /virtual-devices/console@1 name                     aliases {0} ok boot net Boot device: /virtual-devices@100/channel-devices@200/network@0  File and args: Requesting Internet Address for xx:xx:xx:xx:xx:xx Requesting Internet Address for xx:xx:xx:xx:xx:xx Repeat the process for the second SPARC T5-4, install Solaris, RAC and WebLogic Cluster, and you are ready to go. Maybe buying a SuperCluster would have been easier.

  Read the article

• Nominations now open for the Oracle FMW Excellence Awards 2014

  - by Greg Jensen

  2014 Oracle Excellence Award NominationsWho Is the Innovative Leader for Identity Management? •    Is your organization leveraging one of Oracle’s Identity and Access Management solutions in your production environment?•    Are you a leading edge organization that has adopted a forward thinking approach to Identity and Access Management processes across the organization?•    Are you ready to promote and highlight the success of your deployment to your peers? •    Would you a chance to win FREE registration to Oracle OpenWorld 2014? Oracle is pleased to announce the call for nominations for the 2014 Oracle Excellence Awards: Oracle Fusion Middleware Innovation.  The Oracle Excellence Awards for Oracle Fusion Middleware Innovation honor organizations using Oracle Fusion Middleware to deliver unique business value.  This year, the awards will recognize customers across nine distinct categories, including Identity and Access Management.  Oracle customers, who feel they are pioneers in their implementation of at least one of the Oracle Identity and Access Management offerings in a production environment or active deployment, should submit a nomination.  If submitted by June 20th, 2014, you will have a chance to win a FREE registration to Oracle OpenWorld 2014 (September 28 - October 2) in San Francisco, CA.  Top customers will be showcased at Oracle OpenWorld and featured in Oracle publications.   The  Identity and Access Management Nomination Form Additional benefits to nomineesNominating your organization opens additional opportunities to partner with Oracle such as:•    Promotion of your Customer Success StoriesProvides a platform for you to share the success of your initiatives and programs to peer groups raising the overall visibility of your team and your organization as a leader in security•    Social Media promotion (Video, Blog & Podcast)Reach the masses of Oracle’s customers through sharing of success stories, or customer created blog content that highlights the advanced thought leadership role in security with co-authored articles on Oracle Blog page that reaches close to 100,000 subscribers. There are numerous options to promote activities on Facebook, Twitter and co-branded activities using Video and Audio. •    Live speaking opportunities to your peersAs a technology leader within your organization, you can represent your organization at Oracle sponsored events (online, in person or webcasts) to help share the success of your organizations efforts building out your team/organization brand and success. •    Invitation to the IDM Architect ForumOracle is able to invite the right customers into the IDM Architect Forum which is an invite only group of customers that meet monthly to hear technology driven presentations from their own peers (not from Oracle) on today’s trends.  If you want to hear privately what some of the most successful companies in every industry are doing about security, this is the forum to be in. All presentations are private and remain within the forum, and only members can see take advantage of the lessons gained from these meetings.  To date, there are 125 members. There are many more advantages to partnering with Oracle, however, it can start with the simple nomination form for Identity and Access Management category of the 2014 Oracle Excellence Award Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;}

  Read the article

• SQL SERVER – Curious Case of Disappearing Rows – ON UPDATE CASCADE and ON DELETE CASCADE – T-SQL Example – Part 2 of 2

  - by pinaldave

  Yesterday I wrote a real world story of how a friend who thought they have an issue with intrusion or virus whereas the issue was really in the code. I strongly suggest you read my earlier blog post Curious Case of Disappearing Rows – ON UPDATE CASCADE and ON DELETE CASCADE – Part 1 of 2 before continuing this blog post as this is second part of the first blog post. Let me reproduce the simple scenario in T-SQL. Building Sample Data USE [TestDB] GO -- Creating Table Products CREATE TABLE [dbo].[Products]( [ProductID] [int] NOT NULL, [ProductDesc] [varchar](50) NOT NULL, CONSTRAINT [PK_Products] PRIMARY KEY CLUSTERED ( [ProductID] ASC )) ON [PRIMARY] GO -- Creating Table ProductDetails CREATE TABLE [dbo].[ProductDetails]( [ProductDetailID] [int] NOT NULL, [ProductID] [int] NOT NULL, [Total] [int] NOT NULL, CONSTRAINT [PK_ProductDetails] PRIMARY KEY CLUSTERED ( [ProductDetailID] ASC )) ON [PRIMARY] GO ALTER TABLE [dbo].[ProductDetails] WITH CHECK ADD CONSTRAINT [FK_ProductDetails_Products] FOREIGN KEY([ProductID]) REFERENCES [dbo].[Products] ([ProductID]) ON UPDATE CASCADE ON DELETE CASCADE GO -- Insert Data into Table USE TestDB GO INSERT INTO Products (ProductID, ProductDesc) SELECT 1, 'Bike' UNION ALL SELECT 2, 'Car' UNION ALL SELECT 3, 'Books' GO INSERT INTO ProductDetails ([ProductDetailID],[ProductID],[Total]) SELECT 1, 1, 200 UNION ALL SELECT 2, 1, 100 UNION ALL SELECT 3, 1, 111 UNION ALL SELECT 4, 2, 200 UNION ALL SELECT 5, 3, 100 UNION ALL SELECT 6, 3, 100 UNION ALL SELECT 7, 3, 200 GO Select Data from Tables -- Selecting Data SELECT * FROM Products SELECT * FROM ProductDetails GO Delete Data from Products Table -- Deleting Data DELETE FROM Products WHERE ProductID = 1 GO Select Data from Tables Again -- Selecting Data SELECT * FROM Products SELECT * FROM ProductDetails GO Clean up Data -- Clean up DROP TABLE ProductDetails DROP TABLE Products GO My friend was confused as there was no delete was firing over ProductsDetails Table still there was a delete happening. The reason was because there is a foreign key created between Products and ProductsDetails Table with the keywords ON DELETE CASCADE. Due to ON DELETE CASCADE whenever is specified when the data from Table A is deleted and if it is referenced in another table using foreign key it will be deleted as well. Workaround 1: Design Changes – 3 Tables Change the design to have more than two tables. Create One Product Mater Table with all the products. It should historically store all the products list in it. No products should be ever removed from it. Add another table called Current Product and it should contain only the table which should be visible in the product catalogue. Another table should be called as ProductHistory table. There should be no use of CASCADE keyword among them. Workaround 2: Design Changes - Column IsVisible You can keep the same two tables. 1) Products and 2) ProductsDetails. Add a column with BIT datatype to it and name it as a IsVisible. Now change your application code to display the catalogue based on this column. There should be no need to delete anything. Workaround 3: Bad Advices (Bad advises begins here) The reason I have said bad advices because these are going to be bad advices for sure. You should make necessary design changes and not use poor workarounds which can damage the system and database integrity further. Here are the examples 1) Do not delete the data – well, this is not a real solution but can give time to implement design changes. 2) Do not have ON CASCADE DELETE – in this case, you will have entry in productsdetails which will have no corresponding product id and later on there will be lots of confusion. 3) Duplicate Data – you can have all the data of the product table move to the product details table and repeat them at each row. Now remove CASCADE code. This will let you delete the product table rows without any issue. There are so many things wrong this suggestion, that I will not even start here. (Bad advises ends here)  Well, did I miss anything? Please help me with your suggestions. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• The Minimalist Approach to Content Governance - Request Phase

  - by Kellsey Ruppel

  Originally posted by John Brunswick. For each project, regardless of size, it is critical to understand the required ownership, business purpose, prerequisite education / resources needed to execute and success criteria around it. Without doing this, there is no way to get a handle on the content life-cyle, resulting in a mass of orphaned material. This lowers the quality of end user experiences.     The good news is that by using a simple process in this request phase - we will not have to revisit this phase unless something drastic changes in the project. For each of the elements mentioned above in this stage, the why, how (technically focused) and impact are outlined with the intent of providing the most value to a small team. 1. Ownership Why - Without ownership information it will not be possible to track and manage any of the content and take advantage of many features of enterprise content management technology. To hedge against this, we need to ensure that both a individual and their group or department within the organization are associated with the content. How - Apply metadata that indicates the owner and department or group that has responsibility for the content. Impact - It is possible to keep the content system optimized by running native reports against the meta-data and acting on them based on what has been outlined for success criteria. This will maximize end user experience, as content will be faster to locate and more relevant to the user by virtue of working through a smaller collection. 2. Business Purpose Why - This simple step will weed out requests that have tepid justification, as users will most likely not spend the effort to request resources if they do not have a real need. How - Use a simple online form to collect and workflow the request to management native to the content system. Impact - Minimizes the amount user generated content that is of low value to the organization. 3. Prerequisite Education Resources Needed Why - If a project cannot be properly staffed the probability of its success is going to be low. By outlining the resources needed - in both skill set and duration - it will cause the requesting party to think critically about the commitment needed to complete their project and what gap must be closed with regard to education of those resources. How - In the simple request form outlined above, resources and a commitment to fulfilling any needed education should be included with a brief acceptance clause that outlines the requesting party's commitment. Impact - This stage acts as a formal commitment to ensuring that resources are able to execute on the vision for the project. 4. Success Criteria Why - Similar to the business purpose, this is a key element in helping to determine if the project and its respective content should continue to exist if it does not meet its intended goal. How - Set a review point for the project content that will check the progress against the originally outlined success criteria and then determine the fate of the content. This can even include logic that will tell the content system to remove items that have not been opened by any users in X amount of time. Impact - This ensures that projects and their contents do not live past their useful lifespans. Just as with orphaned content, non-relevant information will slow user's access to relevant materials for the jobs. Request Phase Summary With a simple form that outlines the ownership of a project and its content, business purpose, education and resources, along with success criteria, we can ensure that an enterprise content management system will stay clean and relevant to end users - allowing it to deliver the most value possible. The key here is to make it straightforward to make the request and let the content management technology manage as much as possible through metadata, retention policies and workflow. Doing these basic steps will allow project content to get off to a great start in the enterprise! Stay tuned for the next installment - the "Create Phase" - covering security access and workflow involved in content creation, enabling a practical layer of governance over our enterprise content repository.

  Read the article

• Simple Navigation In Windows Phone 7

  - by PeterTweed

  Take the Slalom Challenge at www.slalomchallenge.com! When moving to the mobile platform all applications need to be able to provide different views.  Navigating around views in Windows Phone 7 is a very easy thing to do.  This post will introduce you to the simplest technique for navigation in Windows Phone 7 apps. Steps: 1.     Create a new Windows Phone Application project. 2.     In the MainPage.xaml file copy the following xaml into the ContentGrid Grid:             <StackPanel Orientation="Vertical" VerticalAlignment="Center"  >                 <TextBox Name="ValueTextBox" Width="200" ></TextBox>                 <Button Width="200" Height="30" Content="Next Page" Click="Button_Click"></Button>             </StackPanel> This gives a text box for the user to enter text and a button to navigate to the next page. 3.     Copy the following event handler code to the MainPage.xaml.cs file:         private void Button_Click(object sender, RoutedEventArgs e)         {             NavigationService.Navigate(new Uri( string.Format("/SecondPage.xaml?val={0}", ValueTextBox.Text), UriKind.Relative));         }   The event handler uses the NavigationService.Navigate() function.  This is what makes the navigation to another page happen.  The function takes a Uri parameter with the name of the page to navigate to and the indication that it is a relative Uri to the current page.  Note also the querystring is formatted with the value entered in the ValueTextBox control – in a similar manner to a standard web querystring. 4.     Add a new Windows Phone Portrait Page to the project named SecondPage.xaml. 5.     Paste the following XAML in the ContentGrid Grid in SecondPage.xaml:             <Button Name="GoBackButton" Width="200" Height="30" Content="Go Back" Click="Button_Click"></Button>   This provides a button to navigate back to the first page. 6.     Copy the following event handler code to the SecondPage.xaml.cs file:         private void Button_Click(object sender, RoutedEventArgs e)         {             NavigationService.GoBack();         } This tells the application to go back to the previously displayed page. 7.     Add the following code to the constructor in SecondPage.xaml.cs:             this.Loaded += new RoutedEventHandler(SecondPage_Loaded); 8.     Add the following loaded event handler to the SecondPage.xaml.cs file:         void SecondPage_Loaded(object sender, RoutedEventArgs e)         {             if (NavigationContext.QueryString["val"].Length > 0)                 MessageBox.Show(NavigationContext.QueryString["val"], "Data Passed", MessageBoxButton.OK);             else                 MessageBox.Show("{Empty}!", "Data Passed", MessageBoxButton.OK);         }   This code pops up a message box displaying either the text entered on the first page or the message “{Empty}!” if no text was entered. 9.     Run the application, enter some text in the text box and click on the next page button to see the application in action:   Congratulations!  You have created a new Windows Phone 7 application with page navigation.

  Read the article

• jqGrid (Delete row) - How to send additional POST data???

  - by ronanray

  Hi experts, I'm having problem with jqGrid delete mechanism as it only send "oper" and "id" parameters in form of POST data (id is the primary key of the table). The problem is, I need to delete a row based on the id and another column value, let's say user_id. How to add this user_id to the POST data??? I can summarize the issue as the following: How to get the cell value (user_id) of the selected row? AND, how to add that user_id to the POST data so it can be retrieved from the code behind where the actual delete process takes place. Sample codes: jQuery("#tags").jqGrid({ url: "subgrid.process.php, editurl: "subgrid.process.php?, datatype: "json", mtype: "POST", colNames:['id','user_id','status_type_id'], colModel:[{name:'id', index:'id', width:100, editable:true}, {name:'user_id', index:'user_id', width:200, editable:true}, {name:'status_type_id', index:'status_type_id', width:200} ], pager: '#pagernav2', rowNum:10, rowList:[10,20,30,40,50,100], sortname: 'id', sortorder: "asc", caption: "Test", height: 200 }); jQuery("#tags").jqGrid('navGrid','#pagernav2', {add:true,edit:false,del:true,search:false}, {}, {mtype:"POST",closeAfterAdd:true,reloadAfterSubmit:true}, // add options {mtype:"POST",reloadAfterSubmit:true}, // del options {} // search options ); Help....

  Read the article

• Empty responseText from XMLHttpRequest

  - by PurplePilot

  I have written an XMLHttpRequest which runs fine but returns an empty responseText. The javascript is as follows: var anUrl = "http://api.xxx.com/rates/csv/rates.txt"; var myRequest = new XMLHttpRequest(); callAjax(anUrl); function callAjax(url) { myRequest.open("GET", url, true); myRequest.onreadystatechange = responseAjax; myRequest.setRequestHeader("Cache-Control", "no-cache"); myRequest.send(null); } function responseAjax() { if(myRequest.readyState == 4) { if(myRequest.status == 200) { result = myRequest.responseText; alert(result); alert("we made it"); } else { alert( " An error has occurred: " + myRequest.statusText); } } } The code runs fine. I can walk through and I get the readyState == 4 and a status == 200 but the responseText is always blank. I am getting a log error (in Safari debug) of Error dispatching: getProperties which I cannot seem to find reference to. I have run the code in Safari and Firefox both locally and on a remote server. The URL when put into a browser will return the string and give a status code of 200. I wrote similar code to the same URL in a Mac Widget which runs fine, but the same code in a browser never returns a result.

  Read the article

• Extended SurfaceView's onDraw() method never called

  - by Gab Royer

  Hi, I'm trying to modify the SurfaceView I use for doing a camera preview in order to display an overlaying square. However, the onDraw method of the extended SurfaceView is never called. Here is the source : public class CameraPreviewView extends SurfaceView { protected final Paint rectanglePaint = new Paint(); public CameraPreviewView(Context context, AttributeSet attrs) { super(context, attrs); rectanglePaint.setARGB(255, 200, 0, 0); rectanglePaint.setStyle(Paint.Style.FILL); rectanglePaint.setStrokeWidth(2); } @Override protected void onDraw(Canvas canvas){ canvas.drawRect(new Rect(10,10,200,200), rectanglePaint); Log.w(this.getClass().getName(), "On Draw Called"); } } public class CameraPreview extends Activity implements SurfaceHolder.Callback{ private SurfaceHolder holder; private Camera camera; @Override protected void onCreate(Bundle savedInstanceState){ super.onCreate(savedInstanceState); // We remove the status bar, title bar and make the application fullscreen requestWindowFeature(Window.FEATURE_NO_TITLE); getWindow().setFlags(WindowManager.LayoutParams.FLAG_FULLSCREEN, WindowManager.LayoutParams.FLAG_FULLSCREEN); // We set the content view to be the layout we made setContentView(R.layout.camera_preview); // We register the activity to handle the callbacks of the SurfaceView CameraPreviewView surfaceView = (CameraPreviewView) findViewById(R.id.camera_surface); holder = surfaceView.getHolder(); holder.addCallback(this); holder.setType(SurfaceHolder.SURFACE_TYPE_PUSH_BUFFERS); } public void surfaceChanged(SurfaceHolder holder, int format, int width, int height) { Camera.Parameters params = camera.getParameters(); params.setPreviewSize(width, height); camera.setParameters(params); try { camera.setPreviewDisplay(holder); } catch (IOException e) { e.printStackTrace(); } camera.startPreview(); } public void surfaceCreated(SurfaceHolder holder) { camera = Camera.open(); } public void surfaceDestroyed(SurfaceHolder holder) { camera.stopPreview(); camera.release(); } }

  Read the article

• jQuery.ajax call to Twitter succeeds but returns null for Firefox

  - by Zhami

  I've got code that makes a simple get request to Twitter (search) using jQuery's ajax method. The code works fine on Safari, but fails on Firefox (3.6.3). In the Firefox case, my jQuery.ajax parameters 'success' method is invoked, but the supplied data is null. (In Safari, I receive a boatload of JSON data). My ajax call is: $.ajax({ url: 'http://search.twitter.com/search.json?q='+searchTerm, dataType: 'json', async: true, beforeSend: function(request) { window.console.log('starting AJAX request to get Twitter data'); }, success: function(data, textStatus, request) { window.console.log('AJAX request to get Twitter succeeded: status=' + textStatus); callback(data); }, error: function(request, status, error) { window.console.log('AJAX request to get user data --> Error: ' + status); errback(request, status, error); } }); Firebug shows Response headers: Date Sun, 11 Apr 2010 22:30:26 GMT Server hi Status 200 OK X-Served-From b021 X-Runtime 0.23841 Content-Type application/json; charset=utf-8 X-Served-By sjc1o024.prod.twitter.com X-Timeline-Cache-Hit Miss Cache-Control max-age=15, must-revalidate, max-age=300 Expires Sun, 11 Apr 2010 22:35:26 GMT Vary Accept-Encoding X-Varnish 1827846877 Age 0 Via 1.1 varnish X-Cache-Svr sjc1o024.prod.twitter.com X-Cache MISS Content-Encoding gzip Content-Length 2126 Connection close The HTTP status is OK (200), the Conetnt-Type is properly application/json, and the Content-Length of 2126 (gzip'd) implies data came back. Yet Firebug shows the Response to be empty, and a test of the supplied data shows it o be 'null.' I am aware of a similar post on Stack Overflow: http://stackoverflow.com/questions/1188976/jquery-get-function-succeeds-with-200-but-returns-no-content-in-firefox and from that would assume this problem is possibly related to cross-domain security, but... I know there are many JS widgets and whatnots that ajax get data from Twitter. Is there something I need to enable to allow this?

  Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >