Search Results

Search found 4224 results on 169 pages for 'dual gpu'.

Page 36/169 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

  • HP ENVY TouchSmart 15t-j000 Quad Edition + custom mSata Plextor M5M 64GB SSD

    - by Akash Ramani
    The ssd did not come along with the laptop, so i bought one myself and physically installed it. I've booted into Ubuntu from a USB drive and my goal is to install / and /home in the SSD. (because most of the actual media exists on the HDD) The only problem is i'm unable to detect the SSD while configuring the partitions. I know the SSD is not the problem because it recognizes in a different laptop. I've followed the instructions shown in https://help.ubuntu.com/community/UEFI but that still doesn't help in identifying the SSD partition. Any help would be appreciated. (p.s: I'm wondering if i have to prepare the SSD through windows or something like that)

    Read the article

  • Unable to access ubuntu through windows boot manager

    - by Arvind
    I am having an ASUS K55VM....it came with DOS....to this Windows 7 was installed...now i am planned to add another OS ie Ubuntu...my computer had 4 partitions of 240GB 230GB 230GB and 230GB....i changed this to 5 parts....243GB 230GB 230GB 150GB and an 80GB...i installed Ubuntu 12.04 to the 80GB partition through a USB flash drive....it installed fine...however the problem is during the Boot option in Windows Boot manager when i choose Ubuntu...this what is displayed... Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: 1.Insert your Windows installation disc and restart your computer. 2.Choose your language settings, and then click "Next." 3.Click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance. File: \ubuntu\winboot\wubildr.mbr Status: 0xc000000e Info: The selected entry could not be loaded because the application is missing or corrupt. I tried to change the boot option for the OS and made Ubuntu as my first option....It worked...however windows 7 does not show up in GRUB....in this fear i did the following: Restarted my pc changed boot option 1 to windows. Formatted the drive to which Ubuntu was installed(80GB one)through windows. Restarted again. The problem persists....Windows boot manager shows Ubuntu still and when i choose this it gives two lines one like: grub rescue....but my windows 7 is working perfectly fine. Now want a solution to remove Ubuntu from the windows boot option and reinstall completely...

    Read the article

  • Windows 8 + Ubuntu dualboot problem - ubuntu does not load after windows updates

    - by Michal Biros
    I have installed Windows 8 64-bit and Ubuntu 14.04 64-bit in dualboot with EFI mode. Everything worked great. I could run Ubuntu or Windows without any problems. Only one little issue was that Windows locked NTFS partitions when I shut it down. When I clicked on restart button in Windows and started Ubuntu, partitions mounted successfully. But today ... I opened windows and downloaded all available updates. When I wanted to come back to Ubuntu I noticed that grub did not count down seconds to automatic start. After choosing Ubuntu option manually, the OS did not load. Just black screen with white underscore in the upper left corner. Windows is accessible always without such issues. Last time I solved it by reinstalling ubuntu but I dont want to do it each time windows downloads some updates. Have you ever meet such problem, or do you know how to solve it? EDIT Ubuntu boots, but it won't start. It ends on loading screen.

    Read the article

  • Error mounting: mount exited with exit code 13

    - by Mike Williamson
    I keep a windows partition on my laptop for the occaisional bit of Photoshop work. A while ago I noticed that Windows had disappeared from my grub boot menu and when I try to mount the windows partion, my system hangs for a bit and then I get this: Unable to mount 105 GB Filesystem Error mounting: mount exited with exit code 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Failed to calculate free MFT records: Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. It seems that chkdsk is a windows command but since I can't boot into windows (since its the windows partition that is the problem) I'm not sure what to do. Here is the output of fdisk to give you the lay of the land: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x98000000 Device Boot Start End Blocks Id System /dev/sda1 1 10199 81923436 83 Linux /dev/sda2 * 10200 22947 102398310 7 HPFS/NTFS /dev/sda3 22948 29164 49938052+ 83 Linux /dev/sda4 29165 30401 9936202+ 5 Extended /dev/sda5 29165 30401 9936171 82 Linux swap / Solaris Any guidance would be appreciated!

    Read the article

  • grub problem after grub-repair

    - by alireza
    I had two OS,win 7 and Ubuntu, I was working with win and went out of the room and when came back I saw Grub Rescue!!! I booted live and did grub_repaire and it still says multiple active partitions.operating system not found I feel that it can not find the ubuntu hard drive at all! ! ubuntu@ubuntu:/dev$ sudo fdisk -l Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xde771741 Device Boot Start End Blocks Id System /dev/sda1 * 61 61 0 0 Empty /dev/sda2 2048 30146559 15072256 27 Hidden NTFS WinRE /dev/sda3 * 30146560 30351359 102400 7 HPFS/NTFS/exFAT /dev/sda4 30351360 334483299 152065970 7 HPFS/NTFS/exFAT ubuntu@ubuntu:/dev$ ls autofs dvdrw loop4 ppp ram5 shm tty15 tty29 tty42 tty56 ttyS10 ttyS24 uinput vcsa1 block ecryptfs loop5 psaux ram6 snapshot tty16 tty3 tty43 tty57 ttyS11 ttyS25 urandom vcsa2 bsg fb0 loop6 ptmx ram7 snd tty17 tty30 tty44 tty58 ttyS12 ttyS26 usbmon0 vcsa3 btrfs-control fd loop7 pts ram8 sr0 tty18 tty31 tty45 tty59 ttyS13 ttyS27 usbmon1 vcsa4 bus full loop-control ram0 ram9 stderr tty19 tty32 tty46 tty6 ttyS14 ttyS28 usbmon2 vcsa5 cdrom fuse mapper ram1 random stdin tty2 tty33 tty47 tty60 ttyS15 ttyS29 v4l vcsa6 cdrw fw0 mcelog ram10 rfkill stdout tty20 tty34 tty48 tty61 ttyS16 ttyS3 vcs vcsa7 char hpet mei ram11 rtc tty tty21 tty35 tty49 tty62 ttyS17 ttyS30 vcs1 vga_arbiter console input mem ram12 rtc0 tty0 tty22 tty36 tty5 tty63 ttyS18 ttyS31 vcs2 video0 core kmsg net ram13 sda tty1 tty23 tty37 tty50 tty7 ttyS19 ttyS4 vcs3 zero cpu log network_latency ram14 sda2 tty10 tty24 tty38 tty51 tty8 ttyS2 ttyS5 vcs4 cpu_dma_latency loop0 network_throughput ram15 sda3 tty11 tty25 tty39 tty52 tty9 ttyS20 ttyS6 vcs5 disk loop1 null ram2 sda4 tty12 tty26 tty4 tty53 ttyprintk ttyS21 ttyS7 vcs6 dri loop2 oldmem ram3 sg0 tty13 tty27 tty40 tty54 ttyS0 ttyS22 ttyS8 vcs7 dvd loop3 port ram4 sg1 tty14 tty28 tty41 tty55 ttyS1 ttyS23 ttyS9 vcsa ubuntu@ubuntu:/dev$ someone said { Remove the boot flag from sda1, by typing in a terminal: sudo fdisk /dev/sda1 Then press the 'a' key, and 'Enter'. Then press the '1' key, and 'Enter'. Then press the 'w' key, and 'Enter'. } but after grub-repair I got this log: http://paste.ubuntu.com/1371297/ then I try sudo fdisk /dev/sda1 and But It says unable to open /dev/sda1! which is right as sda1 is not in dev folder (look at the picture!) Can anybody help me? I need to work on my windows for the rest of the semester and don't care of my ubuntu. thank you

    Read the article

  • Ubuntu 12.04-2 does not install with UEFI

    - by Rodrigo
    I'm in trouble to instal Ubuntu in Insipiron 14z. I've already created this question (that was wrongly marked as duplicated): First question But, the error seems to be with UEFI. If I disable UEFI on BIOS Setup, I can get into installation process of Ubuntu normally. But, I didn't finish the installation process because I think that will screw Windows 8 installation. So my questions is: Ubuntu installation should work with UEFI. So, why it didn't? Knowing that the error is with UEFI. I can forget the errors listed here?

    Read the article

  • Windows XP with Ubuntu 14.04 on 2 separate hard drives

    - by maplenet2
    I am new to Ubuntu. I have Windows XP Professional 32-bit on one 300GB IDE hard drive and Ubuntu 14.04 running on another 61GB IDE hard drive, and I cannot get my Windows XP to boot with Grub! When I select Windows XP from the boot menu, Grub just restarts my computer. The computer I have with those two hard drives is a Dell Optiplex GX240, so the hardware is old, and its BIOS won't let me change the boot priority on the two IDE hard drives. What can I do now? Is there a step I missed when installing Ubuntu? Can I edit Grub to boot Windows XP without messing with the BIOS? Do I have to downgrade to an older release of Ubuntu to make it work? I am willing to reinstall Ubuntu, if that's what it takes.

    Read the article

  • How to make Windows boot first?

    - by Rani.Shemer
    I want to know how to make Windows the default boot OS in Ubuntu 11.10, how to make Windows boot first on GRUB2, specifically for Windows 7, which is my current version. I know that are some tutorials about this, but it seems that I made a mistake, so I'm asking. Luckily nothing serious happened. I didn't lose my data. The difference between my question and the tutorials is that the tutorials are from older version. Sorry for any disturbs and redundancy of the question. I'll love it better for a GUI app that making easy the boot. P.S: I forgot to say the version of my OS's I am running Windows 7 Home Premium X64 bit Ubuntu 11.10 X64 bit I hope this will make understand better because I now saw it a tutorial that for 64 bit versions Startup-Manager doesn't work.

    Read the article

  • Apache 'You don't have permission to access / on this server'

    - by Dying
    I just install apache2 on ubuntu,the default www directory is /var/www/ ,I use ln to link it to '/media/Software/Program Files/wamp/www/' at the windows directory,but the apache shows 'You don't have permission to access / on this server',Then I use 'sudo chmod -R 777 /media/Software/Program\ Files/wamp/www/' to set the permission,but it didn't work,and nothing changed when I saw the permission in the preporties of the '.../wamp/www' folder.So I want to know How can I change the www directory to '.../wamp/www' as I also need to access this diretory in windows.

    Read the article

  • grub2 loopback booting ubuntu server iso

    - by Thermionix
    I've got usb-keys setup to multi-boot different linux images using grub2 loopback. The standard ubuntu release isos boot fine, however when attempting to use the server iso it will fail to install saying 'unable to detect cd-media for installation'. the grub.cfg entry; menuentry "ubuntu-12.04-server-amd64" { set isofile="/boot/ubuntu-12.04-server-amd64.iso" loopback loop $isofile linux (loop)/install/vmlinuz file=$isofile/preseed/ubuntu-server.seed ro noprompt noeject -- initrd (loop)/install/initrd.gz } I've attempted to add the following parameters as the fromiso works for debian images on the key iso-scan/filename=/boot/ubuntu-12.04-server-amd64.iso iso-scan/filename=/dev/disk/by-uuid/2859-44B7/boot/ubuntu-12.04-server-amd64.iso fromiso=/dev/disk/by-uuid/2859-44B7/boot/ubuntu-12.04-server-amd64.iso

    Read the article

  • After re-installing ubuntu 13.10, stuck at GRUB Rescue, Boot-Repair didn't work!

    - by user205691
    Because i could not get the WiFi login work, i thought i will reinstall ubuntu, with internet connection to have updated drivers for wireless & graphics etc. I have deleted earlier linux partitions usings gparted and re-installed ubuntu 13.10, exactly following the same steps as i did earlier, making a 100GB /home on dev/sda and pointing root to /dev/sdb (SSD) and swap on dev/sda/ . Installing boot on /dev/sdb. But, somehow i think the grub is either corrupted or removed because i am unable to boot the laptop to any OS now. I get the following message: "no such device" xxxxx followed by huge HEX number GRUB rescue when i type ls on Grub rescue prompt, i can see hd0 & hd1, but thats about it. i tried Boot-repair but it is unable to fix the problem. The following log is generated via boot-repair create log: Boot-repair log I am unable to boot into windows or linux at the moment and need help to fix the grub so i can boot !!

    Read the article

  • Ubuntu 12.04.3 alongside Windows 8.1

    - by user208329
    I brought a new Notebook which has pre-installed Windows 8.1 with an uefi* (-Bios) and secure boot*. (* can switch or turn so off, still no success) When i try to install Ubuntu 12.04.3, the installer doesn't recognize Windows 8.1. There were options, to delete the whole disk or do something else. The second option, shows a few partitions (NTFS) but no Windows. The Ubuntu 13.10 version even did start on my notebook, it gets frozen during start up. (I thought. maybe the newer one will recognize Windows.) I'm not very confident in manipulating grub, I hope there is an easy way or an easy description. Gparted shows: Device Type Size Used /dev/sda freespace 1MB /dev/sda ntfs 1073MB 408MB /dev/sda2 efi 104MB 52MB /dev/sda3 ntfs 134MB 45MB /dev/sda4 ntfs 988465MB 23947MB /dev/sda5 ntfs 10424MB 9483MB free space 0MB /dev/sdb1 fat32 16929MB 9412MB (USB-drive Ubuntu-image)

    Read the article

  • How to restore Windows 7 MBR without a CD

    - by Brandon Bertelsen
    I have been playing with Ubuntu for a few weeks now, and I'd like to revert my computer back to it's original - factory - defaults. On the computer I have a recovery partition (it's a netbook). I went through the process of recovery and everything seemed fine. However, when I restart the computer I'm presented with grub rescue > Now, my understanding is that when I installed Ubuntu "side by side" it replaced the MBR or something like it, with GRUB. I've read on a slew of forums, that I need to use a Windows Recovery Disk. Here are my issues: a) I don't have a recovery disk, I have a recovery partition - it's a netbook. b) I don't have an external cd drive. What I do have is a USB key that has about 1gb of space on it. Thanks in advance.

    Read the article

  • Dock with dual external DVI monitors with Intel + Nvidia Optimus?

    - by Ryan
    I have a Dell Latitude E6420 laptop plugged into a docking station, and the dock has 2 monitors (connected with DVI). Also note that I've installed Ubuntu alongside (dual-boot) Windows 7. I can't get the dual monitors to work both on Ubuntu (either 11.10 or 12.04) and Windows 7. When I run lspci | grep VGA, I get: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation GF108 [Quadro NVS 4200M] (rev a1) If I then reboot and uncheck Optimus setting in the BIOS during reboot, I'm able to get the dual monitors to work in Ubuntu 12.04 (but I need to configure them every boot in Nvidia Settings). When I run lspci | grep VGA, I get: 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [Quadro NVS 4200M] (rev a1) But then if I reboot into Windows (leaving the Optimus unchecked), Windows can't detect external monitors, and the resolution is unacceptably low. I've seen on many forum posts that this particular graphics card setup causes lots of headaches. I haven't been able to resolve my problem yet. How can I use my external display on my laptop with intel and nvidia video cards? How to use external displays with Intel driver on a NVidia/Intel hybrid system nVidia Optimus , Unity 3D and Dual Monitors "Just use VGA instead of DVI" isn't an option because my dock has only 1 VGA port (and 2 DVI). Switching the BIOS setting on every reboot and then reconfiguring the display settings every time is tedious, time-consuming, and impractical. Do you know how to make this work smoothly? Thanks for your help! P.S. see also: http://superuser.com/questions/434358/dell-latitude-e6420-dual-boot-ubuntu-windows-7-optimus-graphics-problems

    Read the article

  • I Installed Ubuntu 12.04 on a dell Inspiron 1501 along side windows vista using the windows installer but it wont boot into Ubuntu

    - by Nicholas
    I Installed Ubuntu 12.04 on a dell Inspiron 1501 with an AMD 64 along side windows vista using the windows installer but it wont boot into Ubuntu. It shows that Ubuntu is on the system when my computer boots up but when I select it to load it goes into a black screen and displays some error messages and tells me that the is no operating system installed. this is the error that i get: Try (hdo, 0):FAT16:no WUBILDR try (hdo, 1)NTFS: error: "Prefix" is not set. symbol not found:'grub_file_get_device_name' Aborted. Broadcom UNDI PXE-2.1 V2-1.0 copyright (c) 2000-2006 Broadcom corporation copyright (c) 1997-2000 Intel corporation All rights reserved PXE-EC8:PXE structure was not found in UNDI driver code segment. PXE-M0F Broadcom PXE Rom Operating system not found How can I fix this? I have tryed re-installing it but i get the same error.

    Read the article

  • Add Windows 7 to boot menu

    - by Cumatru
    Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS - system restore /dev/sda2 13 4674 37436416 7 HPFS/NTFS - Windows 7 /dev/sda3 4674 58843 435116032 7 HPFS/NTFS - data storage /dev/sda4 58843 60802 15728640 83 Linux - Ubuntu 10.10 Initially i´ve installed StartUpManager. This ( i think ) added another 4 instances of Linux + memtest to my boot menu list. Altough, i din´t see any boot menu. It boots into Ubuntu after a few seconds. I´ve tried to add windows 7, but i did not succeed. This is a part of my menu.lst file. title Ubuntu 10.10, kernel 2.6.35-24-generic uuid 1c9748e2-2f11-4a6c-91c0-7310d48c4a7a kernel /boot/vmlinuz-2.6.35-24-generic root=UUID=1c9748e2-2f11-4a6c-91c0-7310d48c4a7a ro quiet splash initrd /boot/initrd.img-2.6.35-24-generic title Chainload into GRUB 2 root 1c9748e2-2f11-4a6c-91c0-7310d48c4a7a kernel /boot/grub/core.img title Ubuntu 10.10, memtest86+ uuid 1c9748e2-2f11-4a6c-91c0-7310d48c4a7a kernel /boot/memtest86+.bin menuentry “Windows 7? { set root=(hd0,2) chainloader +1 } And this is after a upgrade-grub Searching for GRUB installation directory ... found: /boot/grub Searching for default file ... found: /boot/grub/default Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst Searching for splash image ... none found, skipping ... Found kernel: /boot/vmlinuz-2.6.35-24-generic Found kernel: /boot/vmlinuz-2.6.35-22-generic Found GRUB 2: /boot/grub/core.img Found kernel: /boot/memtest86+.bin Updating /boot/grub/menu.lst ... done Later Edit: Ive added the following in 40_custom from /etc/grub.d/ and ive decommented hidden menu line from menu.lst, but i still cant see any boot menu. Ive also tried to press ESC and SHIFT. menuentry "Windows 7 (loader) (on /dev/sda1)" { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' chainloader +1 } menuentry "Windows 7 (loader) (on /dev/sda1)" { insmod part_msdos insmod ntfs set root='(hd0,msdos0)' chainloader +1 } menuentry "Windows 7 (loader) (on /dev/sda1)" { set root= hd(0,0) chainloader +1 } menuentry "!Windows 7 (loader) (on /dev/sda1)" { set root= hd(0,1) chainloader +1 } menuentry "!!Windows 7 (loader) (on /dev/sda1)" { set root= hd(0,2) chainloader +1 }

    Read the article

  • Can't boot Windows Xp after intalling Ubuntu 12.04

    - by Omul Neted
    Here's the situation. I installed Ubuntu using the along side option. Everything went ok. When I restarted I went strait to Ubuntu and it worked beautifully. When I restarted and tried to enter windows, the loading screen appeared, and after 3 -4 seconds it restarted again. No error, no cursor waiting, no nothing. I looked on the internet for help and found several resources. I tried first lilo since it seemes that many people had they're issues solved with it. After lilo neither ubuntu nor Windows would start. I installed and used bootinfoscript. The RESULTS.txt can be seen below https://www.dropbox.com/sh/r3luoa672qe73uq/Mob13HhNiB After that I looked at Boot-Repair I did as instructed here Can't boot XP after Ubuntu Installation, how to fix? ,meaning I redid the mbr of my Ubuntu install using a generic mbr. with no success. The results of boot-repair are in the first link. Now when I restart my computer I don't even get the windows loading screen, just Missing operating system Missing operation system Operating system not found that's it. I did not use the fixboot or fixmbr option because I don't have a windows cd cabable of seeing my hdd drivers. The usual XP windows setup tells me that I have no hdd. Please help, I don't know what to to next. This is my first time with Ubuntu or any Linux OS.

    Read the article

  • Wubi shows error

    - by Quirk
    I tried installing Ubuntu 12.04 using Wubi and it just doesn't work, every time, without fail. I had the following scenarios: 1. I downloaded only wubi.exe and ran it. The wubi installer started downloading the amd64.iso using torrent. But when there were just about 40 secs left to download, it shows an error 404: File not found. 2. I downloaded the iso file seperately and put it in the same folder as the wubi.exe. Now there are two cases: a. Offline: wubi says it could not download the metalinks file and hence cannot download the iso. So I download the meta files separately and place them in the same directory. wubi shows the same error again. b. Online: wubi works in same way as in case 1. and the same problem occurs as in case 1. In short wubi doesn't recognize the already downloaded iso in the directory at all. 3. I burn the iso into a Cd and run it. The same thing occurs as in Case 2. Just in case that you know, I installed SP3 for win XP just before using wubi. While Windows is running alright, is it possible that its causing conflicts for wubi?

    Read the article

  • Booting sequence. Ubuntu 12.04 installation and cohabitation with former OSes

    - by Stephane Rolland
    I am on the brink of installing Ubuntu 12.04 Precise Pengolin on the first primary partition of my hard-drive. (A day in History for me since I had always kept a MS windows at this first place). But I have some fears: This is my last computer available (In the past I used to have 2 or even 3 machines so I could always un/plug HDs for recovery operations and rescue) The current booting sequence is not straight forard. So as to explain the boot sequence let me briefly sum-up the history of this laptop computer. It was a dedicated Windows Vista computer. 1st and only Primary partition. Then I added Windows 7 (on the 2nd primary partition) letting the Windows Vista Boot Loader manage the boot sequence. Then I added Ubuntu 10.04 Lucid Lynx on the 1st sub-partition of the Extended Partitionm asking Grub to be the boot loader. But when I ask Grub to launch windows it launches the Vista BootLoader that manages the choice betzeen Vista and 7. So in theory Grub is on the MasterBootRecord - though I understand where the Vista BootLoader remains. Now, I will no longer use the Ubuntu 10.04 ( on extended partition) and also the Windows vista (on the first primary partition). I will install Ubuntu 12.04 on the First Primary, asking it to install a new bootloader. I want to keep the Windows 7 that is already on the Second Primary partition. And I want it to be loaded by the Ubuntu Boot loader(I don4t knoz zhich is included in this version)... And I am afraid the last point will not work.

    Read the article

  • How do create an encrypted system with multiple Linux distributions?

    - by niels
    A few weeks ago I created a completely encrypted system on a notebook and must say I like the idea. It's a little bit annoying to enter the password on every boot, but it's nice to know even if I loose the computer I don't give my data to other people. With the alternate-cd it's easy to do. Now I have to setup a new system where I want to combine the new idea with my usual usage strategy. There I have more partitions: 3 system, Home, Different Data-Partitions for vm-data, photo-data and mp3-data. The background is that I prefer not to update a system. I prefer to install the new version parallel to the old system. So I can easily test it. Obviously the Data-Partitions are used for both systems. My questions is, how can I easily combine both my strategy and the crypto-approach? Or is it impossible. The way to do the crypted stuff by hand is in my eyes to complicated.

    Read the article

  • grub/burg listing a lot of os's

    - by Matthew
    I guess I've got more than one ubuntu installation (either two or three) along with a windows 7 installation. Each of the ubuntu installations also list something extra (maybe like a safe mode?) within grub. Firstly, how do I remove the ubuntu installations I don't use? (how do I first identify the one I do use? I log into it after booting it, but how do I delete the others) Also, how do I leave just a Windows 7 option and an Ubuntu option?

    Read the article

  • Cannot get past "Installation type" screen after choosing "Install Ubuntu inside Windows 7"

    - by Greg
    After getting to the screen that states: "This computer currently has Windows 7 on it. What would you like to do?" I am not able to continue with the installation process after selecting "Install Ubuntu inside Windows 7". I am running Ubuntu off a USB drive after using UNetBootin and then selecting the "Install Ubuntu 12.04 LTS" shortcut. Everything included on the online guides worked perfectly up to this point. Very new to Linux, please help?

    Read the article

  • Can't boot in Ubuntu after windows upgrade

    - by VanceAnce
    After my lastest update for Ubuntu and Windows XP, I got a Grub error on booting the next day. ls lists the following (without () ): sd0 sd1, msdos sd2 sd5 sd6 When I tried to get into one with (sd0,xy)/ it doesn't detect system or unknown file system error. I tried to boot to a live session with a Knoppix live CD and found out that all data exists. I also tried to recover with TestDisk and it finds all systems. Here is the test disk result: Start End Size in sectors 1 * HPFS - NTFS 0 1 1 7079 254 63 113740137 2 E extended LBA 7080 0 1 12161 254 63 81642330 5 L HPFS - NTFS 7080 1 1 10266 254 63 51199092 [Schule] X extended 12031 30 1 12161 254 63 2102625 6 L Linux Swap 12031 31 33 12161 254 63 2102530 I've 1 winxp-home, 1x Ubuntu (ext3+swap) and 1 winxp prof and then I wrote on mbr with TestDisk but I always get the same errors with Grub. What should I do? I need both XP and Ubuntu. Help me please. more infos in answers below - sry for thos confusing style but im working on diff live system and browsers and have to reboot always the boot info script output is also down below maybe an advanced user can correct my fail posting - after i can solve my issuse i will register here thanx and pls help me with those weired issues ! as i still cant just comment my own answer or those on top i again has to put it here as a sepperate answer..... (or even edit - maybe an browser failur using the live cds ... cause this posti can edit) here the bootinfo script output - but the result is the same as with TestDisk ... but it looks worse - cause it also doesnt detect my old ubuntu ... but there wasnt a eares process or overwrite process visibile ending the last working session output: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== = Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sda. sda1: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows XP Boot files: /boot.ini /ntldr /NTDETECT.COM sda2: __________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: According to the info in the boot sector, sda5 starts at sector 63. Operating System: Windows XP Boot files: sda6: __________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _______________________________________ Disk /dev/sda: 100.0 GB, 100030242816 bytes 255 heads, 63 sectors/track, 12161 cylinders, total 195371568 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 63 113,740,199 113,740,137 7 NTFS / exFAT / HPFS /dev/sda2 113,740,200 195,382,529 81,642,330 f W95 Extended (LBA) /dev/sda5 113,740,263 164,939,354 51,199,092 7 NTFS / exFAT / HPFS /dev/sda6 193,280,000 195,382,529 2,102,530 82 Linux swap / Solaris /dev/sda2 ends after the last sector of /dev/sda /dev/sda6 ends after the last sector of /dev/sda "blkid" output: ____________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 6596D86768011128 ntfs /dev/sda5 1300D3B7744EC141 ntfs Schule /dev/sda6 5b95f2a1-4145-43a5-ac51-41d7dd32b213 swap ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sr0 /cdrom iso9660 (ro,noatime) ================================ sda1/boot.ini: ================================ [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /fastdetect /NoExecute=OptOut multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Professional" /fastdetect [spybotsd] timeout.old=30 the last part shows that i now use the windows boot loader so that i can acces at least one OS but shouldnt i also get acces to my ubuntu partitions with live-linux-cds ? or do i have to boot with grub to get to those files only ??

    Read the article

  • 2 windows loaders after grub2 repair

    - by adi
    I have recently reinstalled w7 and had ubuntu 12.04 lts installed on it,w7 installation deleted the grub2 loader,after that i found solution to use boot-repair from live-cd session, BUT......now i have 2 windows 7(loader)in grub loader,and only 1 windows 7 installation,how can i remove it?One is on on /dev/sda1(which should be w7 sistem reserved partition) and second is on on /dev/sda2(which is w7 installment partition) it says and both log on same w7.All i need is to remove it without brake the grub2 again and if someone is willing to guide me to add windows on primary selection, cause my girlfriends doesnt get along with linux :D.

    Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >