Search Results

Search found 1130 results on 46 pages for 'encode'.

Page 36/46 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

  • Encoding / Error Correction Challenge

    - by emi1faber
    Is it mathematically feasible to encode and initial 4 byte message into 8 bytes and if one of the 8 bytes is completely dropped and another is wrong to reconstruct the initial 4 byte message? There would be no way to retransmit nor would the location of the dropped byte be known. If one uses Reed Solomon error correction with 4 "parity" bytes tacked on to the end of the 4 "data" bytes, such as DDDDPPPP, and you end up with DDDEPPP (where E is an error) and a parity byte has been dropped, I don't believe there's a way to reconstruct the initial message (although correct me if I am wrong)... What about multiplying (or performing another mathematical operation) the initial 4 byte message by a constant, then utilizing properties of an inverse mathematical operation to determine what byte was dropped. Or, impose some constraints on the structure of the message so every other byte needs to be odd and the others need to be even. Alternatively, instead of bytes, it could also be 4 decimal digits encoded in some fashion into 8 decimal digits where errors could be detected & corrected under the same circumstances mentioned above - no retransmission and the location of the dropped byte is not known. I'm looking for any crazy ideas anyone might have... Any ideas out there?

    Read the article

  • what is the best way to stream a audio file to website users/listners

    - by Naveen Chamikara Gamage
    I'm developing a music site which will stream audio files stored in a server to users, audio files will be played through flash player placed in a webpage.. As I heard I need to use a streaming media server for streaming audio files ( like 2mb to 3mb in size).. Do I need to use one? I found some streaming media server softwares like http://www.icecast.org - but as in their documentation, It is used for streaming radio stations and live streaming purposes, but I just need to stream audio files faster and in low size (low bandwidth) with good quality.. I heard I need to encode the audio files first and then send them to listeners and in their end audio files need to be decoded again. Is that true? How can I do that? if I need to use a special web server, where should I host my files? Any good hosting providers? if I host audio files in a normal web server, they will use HTTP or TCP to deliver my audio files to users/ listners but I found that HTTP and TCP are not good ways to use for multi media purposes like streaming audio and video files, and they are used for delivering HTML and stuff. I found I should use RSTP or UDP for streaming audio files.. What should I use? I know that .MP3 files has much better quality than the other formats but it also gives huge size to the audio files.. which format should I use for audio files? Most of the best quality audio files are more than 7mb so I'm planning to convert them my self using a software so I could get low size files with some level of good quality. If I'm converting my audio files what is the good BITRATE I should use for my files? Any known best softwares for converting audio files while keeping quality in a good level? Note** - I know that I will not need complex requirements at the beginning of the site but I wanted to what are the best ways like they are using for soundcloud.com

    Read the article

  • Encryption in Java & Flex

    - by Jef
    I want tp encrypt and decrypt string, with defined salt. But the result must be same if the code run in java and adobe flex. The main goal is: the app in adobe flex will be generate a string that can be decrypt in server using java. I use this flex library http://crypto.hurlant.com/demo/ Try to 'Secret Key' Tab. I want to use AES Encryption, 'CBC' or 'PKCS5'. var k:String = "1234567890123456"; var kdata:ByteArray = Hex.toArray(k); var txt:String = "hello"; var data:ByteArray = Hex.toArray(Hex.fromString(txt));; var name:String = "simple-aes-cbc"; var pad:IPad =new PKCS5(); var mode:ICipher = Crypto.getCipher(name, kdata, pad); pad.setBlockSize(mode.getBlockSize()); mode.encrypt(data); encrypted.text=Hex.fromArray(data); trace(Hex.fromArray(data)); And here is the code in java String plaintext = "hello"; String key = "1234567890123456"; SecretKey keyspec = new SecretKeySpec(key.getBytes(), "AES"); Cipher cipher = Cipher.getInstance("AES/CBC/PKCS5Padding"); cipher.init(Cipher.ENCRYPT_MODE,keyspec); byte[] encrypted = cipher.doFinal(plaintext.getBytes()); BASE64Encoder base64 = new BASE64Encoder(); String encodedString = base64.encode(encrypted); System.out.println(encodedString); Why the result is not same? Can you guys provide the sample with the same result both of java and flex (encrypt and decrypt)? And if I want to change the paramater, for example, from cbc to ebc, which line that need to be changed? Thanks!

    Read the article

  • How to serialize a Bundle?

    - by hermo
    I'd like to serialize a Bundle object, but can't seem to find a simple way of doing it. Using Parcel doesn't seem like an option, since I want to store the serialized data to file. Any ideas on ways to do this? The reason I want this is to save and restore the state of my activity, also when it's killed by the user. I already create a Bundle with the state I want to save in onSaveInstanceState. But android only keeps this Bundle when the activity is killed by the SYSTEM. When the user kills the activity, I need to store it myself. Hence i'd like to serialize and store it to file. Of course, if you have any other way of accomplishing the same thing, i'd be thankful for that too. Edit: I decided to encode my state as a JSONObject instead of a Bundle. The JSON object can then be put in a Bundle as a Serializable, or stored to file. Probably not the most efficient way, but it's simple, and it seems to work ok.

    Read the article

  • How do I detect whether the sample supplied by VideoSink.OnSample() is right-side up?

    - by Ken Smith
    We're currently using the Silverlight VideoSink to capture video from users' local webcams, kinda like so: protected override void OnSample(long sampleTime, long frameDuration, byte[] sampleData) { if (FrameShouldBeSubmitted()) { byte[] resampledData = ResizeFrame(sampleData); mediaController.SetVideoFrame(resampledData); } } Now, on most of the machines that we've tested, the video sample provided in the byte[] sampleData parameter is upside-down, i.e., if you try to take the RGBA data and turn it into, say, a WriteableBitmap, the bitmap will be upside-down. That's odd, but fairly easy to correct, of course -- you just have to reverse the array as you encode it. The problem is that at least on some machines (e.g., the single Macintosh in our test environment), the video sample provided is no longer upside-down, but right-side up, and hence, flipping the image actually results in an image that's received upside-down on the far side. I reported this to MS as a bug, but their (terse) response was that it was "As Designed". Further attempts at clarification have so far been ignored. Now, I'll grant that it's kinda entertaining to imagine the discussions behind this design decision: "OK, just to make it interesting, let's play the video rightside up on a Mac, but let's turn it upside down for Windows!" "Great idea!" "Yeah, that'll keep those developers guessing!" But beyond that, I can't find this, umm, "feature" documented anywhere, nor can I find any documentation on how one is supposed to be able to tell that a given video sample is upside down or rightside up. Any thoughts on how to tell this?

    Read the article

  • MVC View Model Intellisense / Compile error

    - by Marty Trenouth
    I have one Library with my ORM and am working with a MVC Application. I have a problem where the pages won't compile because the Views can't see the Model's properties (which are inherited from lower level base classes). They system throws a compile error saying that 'object' does not contain a definition for 'ID' and no extension method 'ID' accepting a first argument of type 'object' could be found (are you missing a using directive or an assembly reference?) implying that the View is not seeing the model. In the Controller I have full access to the Model and have check the Inherits from portion of the view to validate the correct type is being passed. Controller: return View(new TeraViral_Blog()); View: <%@ Page Title="" Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage<com.models.TeraViral_Blog>" %> <asp:Content ID="Content1" ContentPlaceHolderID="TitleContent" runat="server"> Index2 </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <h2>Index2</h2> <fieldset> <legend>Fields</legend> <p> ID: <%= Html.Encode(Model.ID) %> </p> </fieldset> </asp:Content>

    Read the article

  • How to localize an app on Google App Engine?

    - by Petri Pennanen
    What options are there for localizing an app on Google App Engine? How do you do it using Webapp, Django, web2py or [insert framework here]. 1. Readable URLs and entity key names Readable URLs are good for usability and search engine optimization (Stack Overflow is a good example on how to do it). On Google App Engine, key based queries are recommended for performance reasons. It follows that it is good practice to use the entity key name in the URL, so that the entity can be fetched from the datastore as quickly as possible. Currently I use the function below to create key names: import re import unicodedata def urlify(unicode_string): """Translates latin1 unicode strings to url friendly ASCII. Converts accented latin1 characters to their non-accented ASCII counterparts, converts to lowercase, converts spaces to hyphens and removes all characters that are not alphanumeric ASCII. Arguments unicode_string: Unicode encoded string. Returns String consisting of alphanumeric (ASCII) characters and hyphens. """ str = unicodedata.normalize('NFKD', unicode_string).encode('ASCII', 'ignore') str = re.sub('[^\w\s-]', '', str).strip().lower() return re.sub('[-\s]+', '-', str) This works fine for English and Swedish, however it will fail for non-western scripts and remove letters from some western ones (like Norwegian and Danish with their œ and ø). Can anyone suggest a method that works with more languages? 2. Translating templates Does Django internationalization and localization work on Google App Engine? Are there any extra steps that must be performed? Is it possible to use Django i18n and l10n for Django templates while using Webapp? The Jinja2 template language provides integration with Babel. How well does this work, in your experience? What options are avilable for your chosen template language? 3. Translated datastore content When serving content from (or storing it to) the datastore: Is there a better way than getting the *accept_language* parameter from the HTTP request and matching this with a language property that you have set with each entity?

    Read the article

  • Normalizing (webdav) unicode paths

    - by Evert
    Hi guys, I'm working on a WebDAV implementation for PHP. In order to make it easier for Windows and other operating systems to work together, I need jump through some character encoding hoops. Windows uses ISO-8859-1 in it's HTTP request, while most other clients encode anything beyond ascii as UTF-8. My first approach was to ignore this altogether, but I quickly ran into issues when returning urls. I then figured it's probably best to normalize all urls. Using u¨ as an example. This will get sent over the wire by OS/X as u%CC%88 (this is codepoint U+0308) Windows sents this as: %FC (latin1) But, doing a utf8_encode on %FC, I get : %C3%BC (this is codepoint U+00FC) Should I treat %C3%BC and u%CC%88 as the same thing? If so.. how? Not touching it seems to work OK for windows. It somehow understands that it's a unicode character, but updating the same file throws an error (for no particular reason). I'd be happy to provide more information.

    Read the article

  • Retrieve Flash file post in ASP.NET

    - by Quandary
    Question: In ASP.NET, I retrieve a JPEG-file as Flash post data like this Sub ProcessRequest(ByVal context As HttpContext) Implements IHttpHandler.ProcessRequest context.Response.ContentType = "text/plain" ' Retrieve a bytearray from the post buffer Dim myBuffer As Byte() = context.Request.BinaryRead(Convert.ToInt32(context.Request.InputStream.Length)) System.IO.File.WriteAllBytes("c:\temp\test.jpg", myBuffer) End Sub In Flash, I send it to an asp.net handler like this var jpgSource:BitmapData = cPrint.TakeSnapshot(MovieClip(cGlobals.ccPlanZoomView)); var bmpThisBitmap:Bitmap = new Bitmap(jpgSource); var nQuality:Number = 100; var jpgEncoder:JPGEncoder = new JPGEncoder(nQuality); var jpgStream:ByteArray = jpgEncoder.encode(jpgSource); var header:URLRequestHeader = new URLRequestHeader ("Content-type", "application/octet-stream"); // Make sure to use the correct path to jpg_encoder_download.php var strFileName:String="test.jpg"; var jpgURLRequest:URLRequest = new URLRequest("http://localhost/raumplaner_new/raumplaner_new/cgi-bin/SavePDF.ashx"); //var scriptVars:URLVariables = new URLVariables(); //scriptVars.fn = strFileName; //var myarr:Array= new Array(); //myarr.push(jpgStream); //scriptVars.Files = myarr; jpgURLRequest.requestHeaders.push(header); jpgURLRequest.method = URLRequestMethod.POST; //jpgURLRequest.data = scriptVars; jpgURLRequest.data = jpgStream; var loader:URLLoader = new URLLoader(); loader.dataFormat = URLLoaderDataFormat.BINARY; loader.load(jpgURLRequest); It works but I want to send a few additional variables along, via scriptVars (commented out here). How do I retrieve the JPEG file in that case ? Because if I use parameters, there is no more BinaryRead... Aspecially, how would I read an array of jpeg files (several files) ?

    Read the article

  • DjangoUnicodeDecodeError while storing pickle'd data.

    - by Jack M.
    I've got a simple dict object I'm trying to store in the database after it has been run through pickle. It seems that Django doesn't like trying to encode this error. I've checked with MySQL, and the query isn't even getting there before it is throwing the error, so I don't believe that is the problem. The dict I'm storing looks like this: { 'ordered': [ { 'value': u'First\xd1ame Last\xd1ame', 'label': u'Full Name' }, { 'value': u'123-456-7890', 'label': u'Phone Number' }, { 'value': u'[email protected]', 'label': u'Email Address' } ], 'cleaned_data': { u'Phone Number': u'123-456-7890', u'Full Name': u'First\xd1ame Last\xd1ame', u'Email Address': u'[email protected]' }, 'post_data': <QueryDict: { u'Phone Number': [u'1234567890'], u'Full Name_1': [u'Last\xd1ame'], u'Full Name_0': [u'First\xd1ame'], u'Email Address': [u'[email protected]'] }>, 'user': <User: itis> } The error that gets thrown is: 'utf8' codec can't decode bytes in position 52-53: invalid data. Position 52-53 is the first instance of \xd1 (Ñ) in the pickled data. So far, I've dug around StackOverflow and found a few questions where the database encoding for the objects was wrong. This doesn't help me because there is no MySQL query yet. This is happening before the database. Google also didn't help much when searching for unicode errors on pickled data. It is probably worth mentioning that if I don't use the Ñ, this code works fine.

    Read the article

  • [C#] Improving method to read signed 8-bit integers from hexadecimal.

    - by JYelton
    Scenario: I have a string of hexadecimal characters which encode 8-bit signed integers. Each two characters represent a byte which employ the leftmost (MSB) bit as the sign (rather than two's complement). I am converting these to signed ints within a loop and wondered if there's a better way to do it. There are too many conversions and I am sure there's a more efficient method that I am missing. Current Code: string strData = "FFC000407F"; // example input data, encodes: -127, -64, 0, 64, 127 int v; for (int x = 0; x < strData.Length/2; x++) { v = HexToInt(strData.Substring(x * 2, 2)); Console.WriteLine(v); // do stuff with v } private int HexToInt(string _hexData) { string strBinary = Convert.ToString(Convert.ToInt32(_hexData, 16), 2).PadLeft(_hexData.Length * 4, '0'); int i = Convert.ToInt32(strBinary.Substring(1, 7), 2); i = (strBinary.Substring(0, 1) == "0" ? i : -i); return i; } Question: Is there a more streamlined and direct approach to reading two hex characters and converting them to an int when they represent a signed int (-127 to 127) using the leftmost bit as the sign?

    Read the article

  • Django | Python creating a JSON response

    - by MMRUser
    Hi, I'm trying to convert a server side AJAX response script in to an Django HttpResponse, but apparently it's not working. This is the server-side script /* RECEIVE VALUE */ $validateValue=$_POST['validateValue']; $validateId=$_POST['validateId']; $validateError=$_POST['validateError']; /* RETURN VALUE */ $arrayToJs = array(); $arrayToJs[0] = $validateId; $arrayToJs[1] = $validateError; if($validateValue =="Testuser"){ // validate?? $arrayToJs[2] = "true"; // RETURN TRUE echo '{"jsonValidateReturn":'.json_encode($arrayToJs).'}'; // RETURN ARRAY WITH success }else{ for($x=0;$x<1000000;$x++){ if($x == 990000){ $arrayToJs[2] = "false"; echo '{"jsonValidateReturn":'.json_encode($arrayToJs).'}'; // RETURN ARRAY WITH ERROR } } } And this is the converted code def validate_user(request): if request.method == 'POST': vld_value = request.POST.get('validateValue') vld_id = request.POST.get('validateId') vld_error = request.POST.get('validateError') array_to_js = [vld_id, vld_error, False] if vld_value == "TestUser": array_to_js[2] = True x = simplejson.dumps(array_to_js) return HttpResponse(x) else: array_to_js[2] = False x = simplejson.dumps(array_to_js) test = 'Error' return render_to_response('index.html',{'error':error},context_instance=RequestContext(request)) return render_to_response('index.html',context_instance=RequestContext(request)) I'm using simplejson to encode the Python list (so it will return a json array).Coudn't figure out the problem yet.But I think that I did something wrong about the 'echo'. Anyway I'm expecting an good answer it will help me a lot. Thanks.

    Read the article

  • MD5 Hashing Given a Key in C#

    - by Jared
    I've been looking for a way to hash a given string in C# that uses a predetermined key. On my adventures through the internet trying to find an example i have seen lots of MD5CryptoServiceProvider examples which seem to use a default key for the machine, but none of them that apply a specific key. I need to have a specific key to encode data as to synchronize it to someone else's server. I hand them a hashed string and an ID number and they use that analyze the data and return a similar set to me. So is there anyway to get md5 to hash via a specific key that would be consistent to both. I would prefer this to be done in C#, but if its not possible with the libraries can you do so with some web languages like php or asp? Edit: Misunderstood the scenario I was thrown into and after a little sitting and thinking about why they would have me use a key it appears they want a key appended to the end of the string and hashed. That way the server can appended the key it has along with the data passed to ensure its a valid accessing computer. Anyways... thanks all ^_^ Edit2: As my comment below says, it was the term 'salting' I was oblivious to. Oh the joys of getting thrown into something new with no directions.

    Read the article

  • Is there a standard mapping between JSON and Protocol Buffers?

    - by Daniel Earwicker
    From a comment on the announcement blog post: Regarding JSON: JSON is structured similarly to Protocol Buffers, but protocol buffer binary format is still smaller and faster to encode. JSON makes a great text encoding for protocol buffers, though -- it's trivial to write an encoder/decoder that converts arbitrary protocol messages to and from JSON, using protobuf reflection. This is a good way to communicate with AJAX apps, since making the user download a full protobuf decoder when they visit your page might be too much. It may be trivial to cook up a mapping, but is there a single "obvious" mapping between the two that any two separate dev teams would naturally settle on? If two products supported PB data and could interoperate because they shared the same .proto spec, I wonder if they would still be able to interoperate if they independently introduced a JSON reflection of the same spec. There might be some arbitrary decisions to be made, e.g. should enum values be represented by a string (to be human-readable a la typical JSON) or by their integer value? So is there an established mapping, and any open source implementations for generating JSON encoder/decoders from .proto specs?

    Read the article

  • Improving method to read signed 8-bit integers from hexadecimal.

    - by JYelton
    Scenario: I have a string of hexadecimal characters which encode 8-bit signed integers. Each two characters represent a byte which employ the leftmost (MSB) bit as the sign (rather than two's complement). I am converting these to signed ints within a loop and wondered if there's a better way to do it. There are too many conversions and I am sure there's a more efficient method that I am missing. Current Code: string strData = "FFC000407F"; // example input data, encodes: -127, -64, 0, 64, 127 int v; for (int x = 0; x < strData.Length/2; x++) { v = HexToInt(strData.Substring(x * 2, 2)); Console.WriteLine(v); // do stuff with v } private int HexToInt(string _hexData) { string strBinary = Convert.ToString(Convert.ToInt32(_hexData, 16), 2).PadLeft(_hexData.Length * 4, '0'); int i = Convert.ToInt32(strBinary.Substring(1, 7), 2); i = (strBinary.Substring(0, 1) == "0" ? i : -i); return i; } Question: Is there a more streamlined and direct approach to reading two hex characters and converting them to an int when they represent a signed int (-127 to 127) using the leftmost bit as the sign?

    Read the article

  • Selenium RC: how to capture/handle error?

    - by KenBurnsFan1
    Hi, My test uses Selenium to loop through a CSV list of URLs via an HTTP proxy (working script below). As I watch the script run I can see about 10% of the calls produce "Proxy error: 502" ("Bad_Gateway"); however, the errors are not captured by my catch-all "except Exception" clause -- ie: instead of writing 'error' in the appropriate row of the "output.csv", they get passed to the else clause and produce a short piece of html that starts: "Proxy error: 502 Read from server failed: Unknown error." Also, if I collect all the URLs which returned 502s and re-run the script, they all pass, which leads me to believe that this is a sporadic network path issue. Question: Can the script be made to recognize the the 502 errors, sleep a minute, and then retry the URL instead of moving on to the next URL in the list? The only alternative that I can think of is to apply re.search("Proxy error: 502") after "get_html_source" as a way to catch the bad calls. Then, if the RE matches, put the script to sleep for a minute and then retry 'sel.open(row[0]' on the URL which produced the 502. Any advice would be much appreciated. Thanks! #python 2.6 from selenium import selenium import unittest, time, re, csv, logging class Untitled(unittest.TestCase): def setUp(self): self.verificationErrors = [] self.selenium = selenium("localhost", 4444, "*firefox", "http://baseDomain.com") self.selenium.start() self.selenium.set_timeout("60000") def test_untitled(self): sel = self.selenium spamReader = csv.reader(open('ListOfSubDomains.csv', 'rb')) for row in spamReader: try: sel.open(row[0]) except Exception: ofile = open('output.csv', 'ab') ofile.write("error" + '\n') ofile.close() else: time.sleep(5) html = sel.get_html_source() ofile = open('output.csv', 'ab') ofile.write(html.encode('utf-8') + '\n') ofile.close() def tearDown(self): self.selenium.stop() self.assertEqual([], self.verificationErrors) if __name__ == "__main__": unittest.main()

    Read the article

  • Viewstate in a .ashx Handler?

    - by Matt Dawdy
    I've got a handler (list.ashx for example) that has a method that retrieves a large dataset, then grabs only the records that will be shown on any given "page" of data. We are allowing the users to do sorting on these results. So, on any given page run, I will be retrieving a dataset that I just got a few seconds/minutes ago, but reordering them, or showing the next page of data, etc. My point is that my dataset really hasn't changed. Normally, the dataset would be stuck into the viewstate of a page, but since I'm using a handler, I don't have that convenience. At least I don't think so. So, what is a common way to store the viewstate associated with a current user's given page when using a handler? Is there a way to take the dataset, encode it somehow and send that back to the user, and then on the next call, pass it back and then rehydrate a dataset from those bits? I don't think Session would be a good place to store it since we might have 1000 users all viewing different datasets of different data, and that could bring the server to its knees. At least I think so. Does anyone have any experience with this kind of situation, and can you give me any advice?

    Read the article

  • Fast JSON serialization (and comparison with Pickle) for cluster computing in Python?

    - by user248237
    I have a set of data points, each described by a dictionary. The processing of each data point is independent and I submit each one as a separate job to a cluster. Each data point has a unique name, and my cluster submission wrapper simply calls a script that takes a data point's name and a file describing all the data points. That script then accesses the data point from the file and performs the computation. Since each job has to load the set of all points only to retrieve the point to be run, I wanted to optimize this step by serializing the file describing the set of points into an easily retrievable format. I tried using JSONpickle, using the following method, to serialize a dictionary describing all the data points to file: def json_serialize(obj, filename, use_jsonpickle=True): f = open(filename, 'w') if use_jsonpickle: import jsonpickle json_obj = jsonpickle.encode(obj) f.write(json_obj) else: simplejson.dump(obj, f, indent=1) f.close() The dictionary contains very simple objects (lists, strings, floats, etc.) and has a total of 54,000 keys. The json file is ~20 Megabytes in size. It takes ~20 seconds to load this file into memory, which seems very slow to me. I switched to using pickle with the same exact object, and found that it generates a file that's about 7.8 megabytes in size, and can be loaded in ~1-2 seconds. This is a significant improvement, but it still seems like loading of a small object (less than 100,000 entries) should be faster. Aside from that, pickle is not human readable, which was the big advantage of JSON for me. Is there a way to use JSON to get similar or better speed ups? If not, do you have other ideas on structuring this? (Is the right solution to simply "slice" the file describing each event into a separate file and pass that on to the script that runs a data point in a cluster job? It seems like that could lead to a proliferation of files). thanks.

    Read the article

  • [Asp.Net MVC] Encoding a character

    - by Trimack
    Hi, I am experiencing some weird encoding behaviour in my ASP.NET MVC project. In my Site.Master there is <div class="logo"> <a href="<%=Url.Action("Index", "Win7")%>"><%= Html.Encode("Windows 7 Tutoriál") %></a></div> which translates to the resulting page as <div class="logo"> <a href="/">Windows 7 TutoriA?l</a></div> However, in the Index.aspx there is <h1> Windows 7 Tutoriál</h1> which translates correctly on the same resulting page. I do have <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> as my first line in <head>. Locally, both files are saved in UTF-8 encoding. Any ideas why is this happening and how to fix it? Thanks in advance.

    Read the article

  • Reading UTF-8 XML and writing it to a file with Python

    - by Harri
    I'm trying to parse UTF-8 XML file and save some parts of it to another file. Problem is, that this is my first Python script ever and I'm totally confused about the character encoding problems I'm finding. My script fails immediately when it tries to write non-ascii character to a file, but it can print it to command prompt (at least in some level) Here's the XML (from the parts that matter at least, it's a *.resx file which contains UI strings) <?xml version="1.0" encoding="utf-8"?> <root> <resheader name="foo"> <value>bar</value> </resheader> <data name="lorem" xml:space="preserve"> <value>ipsum öä</value> </data> </root> And here's my python script from xml.dom.minidom import parse names = [] values = [] def getStrings(path): dom = parse(path) data = dom.getElementsByTagName("data") for i in range(len(data)): name = data[i].getAttribute("name") names.append(name) value = data[i].getElementsByTagName("value") values.append(value[0].firstChild.nodeValue.encode("utf-8")) def writeToFile(): with open("uiStrings-fi.py", "w") as f: for i in range(len(names)): line = names[i] + '="'+ values[i] + '"' #varName='varValue' f.write(line) f.write("\n") getStrings("ResourceFile.fi-FI.resx") writeToFile() And here's the traceback: Traceback (most recent call last): File "GenerateLanguageFiles.py", line 24, in writeToFile() File "GenerateLanguageFiles.py", line 19, in writeToFile line = names[i] + '="'+ values[i] + '"' #varName='varValue' UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 2: ordinal not in ran ge(128) How should I fix my script so it would read and write UTF-8 characters properly? The files I'm trying to generate would be used in test automation with Robots Framework.

    Read the article

  • I want to find the span tag beween the LI tag and its attributes but no luck.

    - by Mahesh
    I want to find the span tag beween the LI tag and its attributes. Trying with beautful soap but no luck. Details of my code. Is any one point me right methodlogy In this this code, my getId function should return me id = "0_False-2" Any one know right method? from BeautifulSoup import BeautifulSoup as bs import re html = '<ul>\ <li class="line">&nbsp;</li>\ <li class="folder-open-last" id="0">\ <img style="float: left;" class="trigger" src="/media/images/spacer.gif" border="0">\ <span class="text" id="0_False">NOC</span><ul style="display: block;"><li class="line">&nbsp;</li><li class="doc" id="1"><span class="active text" id="0_False-1">PNQAIPMS1</span></li><li class="line">&nbsp;</li><li class="doc-last" id="2"><span class="text" id="0_False-2">PNQAIPMS2</span></li><li class="line-last"></li></ul></li><li class="line-last"></li>\ </ul>' def getId(html, txt): soup = bs(html) soup.findAll('ul',recursive=False) head = soup.contents[0] temp = head elements = {} while True: # It temp is None that means no HTML tags are available if temp == None: break #print temp if re.search('li', str( temp)) != None: attr = str(temp.attrs).encode('ascii','ignore') attr = attr.replace(' ', '') attr = attr.replace('[', '') attr = attr.replace(']', '') attr = attr.replace(')', '') attr = attr.replace('(', '') attr = attr.replace('u\'', '') attr = attr.replace('\'', '') attr = attr.split(',') span = str(temp.text) if span == txt: return attr[3] temp = temp.next else: temp = temp.next id = getId(html,"PNQAIPMS2") print "ID = " + id

    Read the article

  • Sudden issues reading uncompressed video using opencv

    - by JohnSavage
    I have been using a particular pipeline to process video using opencv to encode uncompressed video (fourcc = 0), and opencv python bindings to then open and work on these files. This has been working fine for me on OpenCV 2.3.1a on Ubuntu 11.10 until just a few days ago. For some reason it currently is only allowing me to read the first frame of a given file the first time I open that file. Further frames are not read, and once I touch the file once with my program, it then cannot even read the first frame. More detail: I created the uncompressed video files as follows: out_video.open(out_vid_name, 0, // FOURCC = 0 means record raw fps, Size(640, 480)) Again, these videos worked fine for me until about a week ago. Now, when I try to open one of these I get the following message (from what I think is ffmpeg): Processing video.avi Using network protocols without global network initialization. Please use avformat_network_init(), this will become mandatory later. [avi @ 0x29251e0] parser not found for codec rawvideo, packets or times may be invalid. It reads and displays the first frame fine, but then fails to read the next frame. Then, when I try to run my code on the same video, the capture still opens with the same message as above. However, it cannot even read the very first frame. Here is the code to open the capture: self.capture = cv2.VideoCapture(filename) if not self.capture.isOpened() print "Error: could not open capture" sys.exit() Again, this part is passed without any issue, but then the break happens at: success, rgb = self.capture.read() if not success: print "error: could not read frame" return False This part breaks at the second frame on the first run of the video file, and then on the first frame on subsequent runs. I really don't know where to even begin debugging this. Please help!

    Read the article

  • Encoding h.264 with libavcodec/x264

    - by Leviathan
    I am attempting to encode video using libavcodec/libavformat. I'm trying to change the standard output-example.c from ffmpeg source. The AVI file is created on the disk, but the only sound is encoded. I tried adding a lot of options for x264 from here. All the other codecs works fine, mpeg2, mpeg4, mjpeg, xvid. In addition to specifying the parameters x264, I also set the codec to AVOutputFormat structure. That's all I've done. AVOutputFormat *pOutFormat; // in header file av_register_all(); AVCodec *codec = avcodec_find_encoder_by_name("libx264"); pOutFormat = guess_format("avi", NULL, NULL); pOutFormat->video_codec = codec->id; The debug output of my application: Output #0, mp4, to 'D:\1.avi': Stream #0.0: Video: libx264, yuv420p, 320x240, q=10-51, 500 kb/s, 90k tbn, 25 tbc Stream #0.1: Audio: aac, 44100 Hz, 1 channels, s16, 128 kb/s [libx264 @ 0x694010]using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 [libx264 @ 0x694010]bitrate tolerance too small, using .01 [libx264 @ 0x694010]profile Main, level 2.0 [libx264 @ 0x694010]frame I:150 Avg QP:14.76 size: 2534 [libx264 @ 0x694010]mb I I16..4: 75.9% 0.0% 24.1% [libx264 @ 0x694010]final ratefactor: 17.57 [libx264 @ 0x694010]coded y,uvDC,uvAC intra: 42.7% 92.4% 47.4% [libx264 @ 0x694010]i16 v,h,dc,p: 11% 14% 2% 73% [libx264 @ 0x694010]i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 21% 18% 29% 5% 8% 10% 3% 3% 2% [libx264 @ 0x694010]kb/s:506.79

    Read the article

  • problem in json response from server to client using jquery

    - by user1400
    hello i try to use ajax and zend framework in my application , i could pass variable to server but i can not get data from server , it does not return values, it return all html code page, where is my mistake? or should i config other thing? $('#myForm').submit(function($e){ $e.preventDefault(); var $paramToServer=$("#myForm").serialize(); $.ajax({ type:'POST', url:'test', data:$paramToServer , success:function(re){ var res = $.evalJSON(re); console.log(res.id); // to see in firebog }, dataType:'json' }); }); public function testAction() { $this->_helper->getHelper('viewRenderer')->setNoRender(); //disable layout Zend_Layout::getMvcInstance()->disableLayout(); $name=$this->getRequest()->getParam ( 'name' ); //pass $name to server $return = array( 'id' => '5', 'family' => 'hello ', ); $return = Zend_Json::encode( $return); // Response $this->getResponse()->setBody($return); } thanks

    Read the article

  • QueryString malformed after URLDecode

    - by pdavis
    I'm trying to pass in a Base64 string into a C#.Net web application via the QueryString. When the string arrives the "+" (plus) sign is being replaced by a space. It appears that the automatic URLDecode process is doing this. I have no control over what is being passed via the QueryString. Is there any way to handle this server side? Example: http://localhost:3399/Base64.aspx?VLTrap=VkxUcmFwIHNldCB0byAiRkRTQT8+PE0iIHBsdXMgb3IgbWludXMgNSBwZXJjZW50Lg== Produces: VkxUcmFwIHNldCB0byAiRkRTQT8 PE0iIHBsdXMgb3IgbWludXMgNSBwZXJjZW50Lg== People have suggested URLEncoding the querystring: System.Web.HttpUtility.UrlEncode(yourString) I can't do that as I have no control over the calling routine (which is working fine with other languages). There was also the suggestion of replacing spaces with a plus sign: Request.QueryString["VLTrap"].Replace(" ", "+"); I had though of this but my concern with it, and I should have mentioned this to start, is that I don't know what other characters might be malformed in addition to the plus sign. My main goal is to intercept the QueryString before it is run through the decoder. To this end I tried looking at Request.QueryString.toString() but this contained the same malformed information. Is there any way to look at the raw QueryString before it is URLDecoded? After further testing it appears that .Net expects everything coming in from the QuerString to be URL encoded but the browser does not automatically URL encode GET requests.

    Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >