Search Results

Search found 1733 results on 70 pages for 'isc dhcp'.

Page 36/70 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

  • Protecting DNS entries from duplicate hostnames entering network

    - by Aszurom
    Given a Windows domain, with DNS provided by a server on that domain, I am curious about what happens if a guest joins the network attempting to use the same hostname as an existing server, and then tries to register that hostname in DNS with its DHCP address. Can this potentially be disruptive to the server, or is Windows DNS smart enough to spot a duplicate hostname and deny an auto-register request from that host? What actions can be taken to ensure that DNS for a hostname cannot be altered?

    Read the article

  • Router/Security question: Am I hacked?

    - by IVR Avenger
    Hi, all. I've noticed that my home broadband speed seems to be a bit slow in recent days. I noticed, last night, that my Wireless Router had given a DHCP lease to a public IP address with an odd formation; something like 111.10.11.110. Should I consider these warning sings of my ZyXEL router being compromised in some way? Thanks, IVR Avenger

    Read the article

  • Accessing guests on virtual network when connected to host via PPTP

    - by Viktor Elofsson
    I'm setting up a development machine which runs Ubuntu 12.04 and KVM for virtualization. I have a guest running Ubuntu 12.04 which can be accessed from the host via its IP address which is assigned by libvirt. The guest can also access the internet, no problem there. However, now I want to setup PPTP so I can connect to the host (from my workstation running Windows 7) and directly access guests without relying on SSH port forwarding. I can connect from my W7-machine to the host (PPTP), but I cannot access any virtual machines (which are accessable from the host directly). Relevant configuration files cat /etc/network/interfaces auto lo iface lo inet loopback # device: eth0 auto eth0 iface eth0 inet static address x.x.x.x broadcast x.x.x.x netmask x.x.x.x gateway x.x.x.x # default route to access subnet up route add -net x.x.x.x netmask x.x.x.x gw x.x.x.x eth0 virsh net-edit default <network> <name>default</name> <uuid>xxxxxxxx-72ce-3c20-af0f-d3a010f1bef0</uuid> <forward mode='nat'/> <bridge name='virbr0' stp='on' delay='0' /> <mac address='52:54:00:xx:xx:xx'/> <ip address='192.168.122.1' netmask='255.255.255.0'> <dhcp> <range start='192.168.122.2' end='192.168.122.254' /> <host mac='52:54:00:yy:yy:yy' name='web1' ip='192.168.122.11' /> </dhcp> </ip> </network> cat /etc/pptpd.conf (commented lines removed) # TAG: option # Specifies the location of the PPP options file. # By default PPP looks in '/etc/ppp/options' # option /etc/ppp/pptpd-options # TAG: logwtmp # Use wtmp(5) to record client connections and disconnections. # logwtmp #(Recommended) localip 192.168.122.1 remoteip 192.168.122.234-238,192.168.122.245 cat /etc/ppp/chap-secrets* # Secrets for authentication using CHAP # client server secret IP addresses xxxxx * yyyyyyyyyy 192.168.122.100 I get the correct IP address when connecting my W7-machine, but when I try to ping the virtual machine at 192.168.122.11 I get Reply from 192.168.122.1: Destination port unreachable. It's probably something trivial I'm missing but I can't for the life of me figure out what it is. So I'm turning to you, serverfault.

    Read the article

  • No Internet connectivity to linux container on Debian

    - by kirankumar
    I have created a linux container with debian-wheezy template. I am not able to have internet connectivity from the container. Below is my network configuration. Could some one please help me in figuring out the issue ? I can ping to the eth0 ip address in the container from the host. Similarly, i can ping from container to br0 ip address on the host. /etc/network/interfaces on host =============================== # The loopback network interface auto lo iface lo inet loopback # The primary network interface #allow-hotplug eth0 auto eth0 iface eth0 inet dhcp # bridge configuration auto br0 iface br0 inet dhcp bridge_ports eth0 vethCE2 bridge_fd 0 bridge_stp off bridge_maxwait 0 ifconfig -a output on host ========================== ifconfig -a br0 Link encap:Ethernet HWaddr 08:00:27:bd:61:5e inet addr:10.0.0.11 Bcast:10.0.0.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:febd:615e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:422 errors:0 dropped:0 overruns:0 frame:0 TX packets:266 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:174110 (170.0 KiB) TX bytes:31582 (30.8 KiB) eth0 Link encap:Ethernet HWaddr 08:00:27:bd:61:5e UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13017 errors:0 dropped:0 overruns:0 frame:0 TX packets:6210 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7944745 (7.5 MiB) TX bytes:1368421 (1.3 MiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:835 errors:0 dropped:0 overruns:0 frame:0 TX packets:835 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:91148 (89.0 KiB) TX bytes:91148 (89.0 KiB) vethCE2 Link encap:Ethernet HWaddr fe:3a:43:52:14:49 inet6 addr: fe80::fc3a:43ff:fe52:1449/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:52 errors:0 dropped:0 overruns:0 frame:0 TX packets:205 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2660 (2.5 KiB) TX bytes:31133 (30.4 KiB) brctl show output on host ========================== bridge name bridge id STP enabled interfaces br0 8000.080027bd615e no eth0 vethCE2 /etc/network/interfaces on container ======================================= auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.0.0.99 netmask 255.255.255.0 network 10.0.0.0 ifconfig -a output on container =============================== root@CE2:~# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:11:22:33:44:00 inet addr:10.0.0.99 Bcast:10.0.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:22ff:fe33:4400/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:198 errors:0 dropped:0 overruns:0 frame:0 TX packets:52 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:30121 (29.4 KiB) TX bytes:2660 (2.5 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:26 errors:0 dropped:0 overruns:0 frame:0 TX packets:26 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2366 (2.3 KiB) TX bytes:2366 (2.3 KiB) Networking content of /var/lib/lxc/CE2/config ============================================== # networking lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 lxc.network.name = eth0 lxc.network.veth.pair = vethCE2 # It is fine to be commented out #lxc.network.ipv4 = 192.168.10.21/24 # Change this lxc.network.hwaddr = 00:11:22:33:44:00 Let me know if you need any other details. Thanks, Kiran Kumar

    Read the article

  • Change Fedora 12 Hostname through gui

    - by drozzy
    How can I change fedora 12 hostname using gui tools (network connections) only, without editing config files? All I can see right now if I select "Manual" in IPv4 settings is "DNS servers" or DHCP client ID, neither of which sounds like "domain/hostname" combination. Tips?

    Read the article

  • Change Fedora 12 Hostname through gui

    - by drozzy
    How can I change fedora 12 hostname using gui tools (network connections) only, without editing config files? All I can see right now if I select "Manual" in IPv4 settings is "DNS servers" or DHCP client ID, neither of which sounds like "domain/hostname" combination. Tips?

    Read the article

  • 6TO4 Windows 2003 DNS

    - by OptimAdam
    This is puzzling me a bit. We are running server 2003 DNS/DHCP and normally we disable IPV6 on the client end. But I have just noticed with windows 7 and server 2008 R2 if I disable IPv6 then it registers an 6TO4 address in DNS not its Standard IP address. If I enable IPv6 it registers its ip. Can anyone explain why this is? Regards Adam

    Read the article

  • Changing IP on Domain Controller?

    - by Beuy
    I'm considering changing the IP on a 2008 Domain Controller, anything that I should be aware of to look out for? Will be doing this on a Saturday night to, leases renew every 24 hours so by Monday morning all the machines will have valid DHCP leases with correct DNS servers. Have a list of all machines on static IP so I know to update them while I'm at it.

    Read the article

  • Home Network Speed Control

    - by DanSpd
    I have a home network installed in following way: Internet<-server<-switch<-computers,etc Server has DHCP server installed and I would like to be able to limit download&upload speed for each client connected to server via switch. Anyone can suggest good free software to do that? Thanks

    Read the article

  • What resources are best for staying current about information security?

    - by dr.pooter
    What types of sites do you visit, on a regular basis, to stay current on information security issues? Some examples from my list include: http://isc.sans.org/ http://www.kaspersky.com/viruswatch3 http://www.schneier.com/blog/ http://blog.fireeye.com/research/ As well as following the security heavyweights on twitter. I'm curious to hear what resources you recommend for daily monitoring. Anything specific to particular operating systems or other software. Are mailing lists still considered valuable. My goal would be to trim the cruft of all the things I'm currently subscribed to and focus on the essentials.

    Read the article

  • Can Linux report IP conflicts?

    - by James
    If a Red Hat or other Linux host has a conflict with an IP address, is there a way to have it display a warning message on the console or in a log, like Windows and MacOS do? i.e. my computer has an IP address configured (or received from a DHCP server) but finds another device on the network using the assigned address. Will it log the conflict?

    Read the article

  • Vmware - How do i config a host-only network

    - by nXqd
    The understanding about Host-only: I use VMware 7, Vmnet1 is the host-only adapter for host and it's IP is 192.168.209.1 . I'm really confused about this , does it connect to Vmnet 1 switch and Vmnet has DHCP also, it provieds IP range: Why it has virtual host adapter ( Vmnet 1) has IP which isn't in range while it's just an adapter in virtual network, it connects through switch Vmnet like the guest adapter Waiting for your answers , thanks in advance :)

    Read the article

  • Reverse lookup SERVFAIL

    - by Quan Tran
    I just set up a DNS server and a web server using Virtualbox. The IP address of the DNS server is 192.168.56.101 and the web server 192.168.56.102. Here are my configuration files for the DNS server: named.conf: // // named.conf // // Provided by Red Hat bind package to configure the ISC BIND named(8) DNS // server as a caching only nameserver (as a localhost DNS resolver only). // // See /usr/share/doc/bind*/sample/ for example named configuration files. // options { directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; //query-source address * port 53; //forward first; forwarders { 8.8.8.8; 8.8.4.4; }; listen-on port 53 { 127.0.0.1; 192.168.56.0/24; }; allow-query { localhost; 192.168.56.0/24; }; recursion yes; dnssec-enable yes; dnssec-validation yes; dnssec-lookaside auto; /* Path to ISC DLV key */ bindkeys-file "/etc/named.iscdlv.key"; managed-keys-directory "/var/named/dynamic"; }; logging { channel default_debug { file "data/named.run"; severity debug 10; print-category yes; print-time yes; print-severity yes; }; }; zone "quantran.com" in { type master; file "named.quantran.com"; }; zone "56.168.192.in-addr.arpa" in { type master; file "named.192.168.56"; allow-update { none; }; }; include "/etc/named.rfc1912.zones"; include "/etc/named.root.key"; named.quantran.com: $TTL 86400 quantran.com. IN SOA dns1.quantran.com. root.quantran.com. ( 100 ; serial 3600 ; refresh 600 ; retry 604800 ; expire 86400 ) IN NS dns1.quantran.com. dns1.quantran.com. IN A 192.168.56.101 www.quantran.com. IN A 192.168.56.102 named.192.168.56: $TTL 86400 $ORIGIN 56.168.192.in-addr.arpa. @ IN SOA dns1.quantran.com. root.quantran.com. ( 100 ; serial 3600 ; refresh 600 ; retry 604800 ; expire 86400 ) ; minimum IN NS dns1.quantran.com. 101.56.168.192.in-addr.arpa. IN PTR dns1.quantran.com. 102 IN PTR www.quantran.com. When I try a normal lookup from the host (I configured so that the only nameserver the host uses is the DNS server 192.168.56.101): quan@quantran:~$ host www.quantran.com www.quantran.com has address 192.168.56.102 quan@quantran:~$ host dns1.quantran.com dns1.quantran.com has address 192.168.56.101 But when I try a reverse lookup: quan@quantran:~$ host -v 192.168.56.101 192.168.56.101 Trying "101.56.168.192.in-addr.arpa" Using domain server: Name: 192.168.56.101 Address: 192.168.56.101#53 Aliases: Host 101.56.168.192.in-addr.arpa not found: 2(SERVFAIL) Received 45 bytes from 192.168.56.101#53 in 0 ms quan@quantran:~$ host -v 192.168.56.102 192.168.56.101 Trying "102.56.168.192.in-addr.arpa" Using domain server: Name: 192.168.56.101 Address: 192.168.56.101#53 Aliases: Host 102.56.168.192.in-addr.arpa not found: 2(SERVFAIL) Received 45 bytes from 192.168.56.101#53 in 0 ms So why can't I perform a reverse lookup? Anything wrong with the zone configuration files? Thanks in advance :) Oh, here is the output from the log file /var/named/data/named.run when I perform the reverse lookup: quan@quantran:~$ host 192.168.56.102 192.168.56.101 Using domain server: Name: 192.168.56.101 Address: 192.168.56.101#53 Aliases: Host 102.56.168.192.in-addr.arpa not found: 2(SERVFAIL) /var/named/data/named.run: 02-Jun-2014 15:18:11.950 client: debug 3: client 192.168.56.1#51786: UDP request 02-Jun-2014 15:18:11.950 client: debug 5: client 192.168.56.1#51786: using view '_default' 02-Jun-2014 15:18:11.950 security: debug 3: client 192.168.56.1#51786: request is not signed 02-Jun-2014 15:18:11.950 security: debug 3: client 192.168.56.1#51786: recursion available 02-Jun-2014 15:18:11.950 client: debug 3: client 192.168.56.1#51786: query 02-Jun-2014 15:18:11.950 client: debug 10: client 192.168.56.1#51786: ns_client_attach: ref = 1 02-Jun-2014 15:18:11.950 query-errors: debug 1: client 192.168.56.1#51786: query failed (SERVFAIL) for 102.56.168.192.in-addr.arpa/IN/PTR at query.c:5428 02-Jun-2014 15:18:11.950 client: debug 3: client 192.168.56.1#51786: error 02-Jun-2014 15:18:11.950 client: debug 3: client 192.168.56.1#51786: send 02-Jun-2014 15:18:11.950 client: debug 3: client 192.168.56.1#51786: sendto 02-Jun-2014 15:18:11.951 client: debug 3: client 192.168.56.1#51786: senddone 02-Jun-2014 15:18:11.951 client: debug 3: client 192.168.56.1#51786: next 02-Jun-2014 15:18:11.951 client: debug 10: client 192.168.56.1#51786: ns_client_detach: ref = 0 02-Jun-2014 15:18:11.951 client: debug 3: client 192.168.56.1#51786: endrequest 02-Jun-2014 15:18:11.951 client: debug 3: client @0xb537e008: udprecv Also, I made some changes to the log section in named.conf.

    Read the article

  • Macintosh computers cannot connect to router unless we re-start the modem and router

    - by dwwilson66
    We have a small office network with DSL and a Netgear WNR-2000 wireless router acting as a DHCP server. There are nine devices connected to the router, wirelessly and wired. Whenever a Mac computer tries to connect, it's unsuccessful until we restart the router. Each of the possible devices that can connect to the network is listed in a table to assign certain IP addresses to certain MAC addresses. I am running WPA-PSK security. I can view the router status and see that the Mac's MAC address is visible to the router, but with a 169.* IP address, even though I'm assigning its MAC address to an IP address within my subnet. All non-Mac devices attached to the network connect properly, and can access the network properly even AFTER the Mac has not successfully connected. The network includes Windows devices, Roku boxes, printers and internet ready TVs. This to me, would point to a DHCP issue with how Mac communicates with my network. One interesting thing to note is that if a Mac connects and is prevented from sleeping, it will stay connected indefinitely; reissuing the security cert from the router works fine. I'm not sure if that's supposed to sever & re-establish a connection with the updated credentials or not, but I do stay connected. If the Mac sleeps and is awakened while the security cert is still valid, it connects fine. If the security certificate expires while the Mac is asleep, we need to restart the router. Restarting the router will ALWAYS assigns the proper IP addresses to the Mac equipment. I have heard anecdotally that Mac doesn't play well with 802.11n; I have not tested any other Wireless protocols. There's a couple issues here: First, I found this on Stack, Mac laptop crashing wireless router, but it's not rally applicable since the router isn't crashing. But, it does give some clues about Mac's accessing the network. I did change my encryption from WEP to WPA-PSK, but after about a week, we're still experiencing the issue. I'm not really sure if there's anything else useful in that question. Second, I'm considering getting a 802.11c router and hooking it up to the wireless N router. the 802.11c router would handle all the Mac traffic, and would be set up as a Mac-only subnet. Everything else would remain as is. However, I'm not sure if this is doable on a technology level...do I need a bridge or is this some way to do this with regular consumer gear?

    Read the article

  • Windows 2008 running as KVM guest networking issue

    - by Evolver
    I have a strange networking problem with Windows 2008 server R2, running as guest under KVM-Qemu host. Host is CentOS 6.3 x86_64. It's network settings: # cat /etc/sysconfig/network-scripts/ifcfg-br0 DEVICE=br0 BOOTPROTO=static BROADCAST=xx.xx.xx.63 IPADDR=xx.xx.xx.4 NETMASK=255.255.255.192 NETWORK=xx.xx.xx.0 ONBOOT=yes TYPE=Bridge # cat /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 HWADDR=xx:xx:xx:xx:xx:xx ONBOOT=yes BRIDGE=br0 IPV6INIT=yes IPV6_AUTOCONF=yes # cat /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=no HOSTNAME=my.hostname GATEWAY=xx.xx.xx.1 # cat /etc/sysctl net.ipv4.ip_forward = 1 # tried to set it to 0 without any changes net.ipv4.conf.default.rp_filter = 1 # tried to set it to 0 without any changes net.ipv4.conf.default.accept_source_route = 0 # tried to set it to 1 without any changes kernel.sysrq = 0 kernel.core_uses_pid = 1 net.ipv4.tcp_syncookies = 1 net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-arptables = 0 kernel.msgmnb = 65536 kernel.msgmax = 65536 kernel.shmmax = 68719476736 kernel.shmall = 4294967296 # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface xx.xx.xx.0 0.0.0.0 255.255.255.192 U 0 0 0 br0 169.254.0.0 0.0.0.0 255.255.0.0 U 1004 0 0 br0 0.0.0.0 xx.xx.xx.1 0.0.0.0 UG 0 0 0 br0 Node IP is xx.xx.xx.4, guest IP is xx.xx.xx.24, both host and guest is in the same network (/26). There are several linux guest running fine on the node (centos, debian, ubuntu, arch), and even Windows 2003 x86 also running fine. But Win2008 does not. I wonder, what's the difference. From Win2008 guest I can ping nothing: neither gateway, nor any other IP, even they are in the same subnet. From outside I also cannot ping guest. Almost. If I ping it from another server in same subnet, it's barely pinging, losing more than 90% packets. Firewall on the guest is completely off. Tried to set up network manually as well as via DHCP without success (BTW, DHCP set up network settings correctly). I suspect that is a kind of routing problem, but I spent whole day and still cannot figure it out. I would be appreciate for any help.

    Read the article

  • Windows XP "automatic" services not starting

    - by Mala
    Hi I have a fresh install of WinXP. The main problem is that every time I start it up, I have to go into Administrative Tools and start the needed services, such as DCOM, RTP, DHCP, etc etc. The only services that start automatically are: plug and play remote procedure server windows audio workstation All of the rest have to be started manually, in spite of the fact that they're listed as "automatic". Why won't they start on their own like they should? Thanks, Mala

    Read the article

  • pfSense gateway rules by IP ranges

    - by lpfavreau
    Hello, I have pfSense (1.2.3) with a WAN (gateway 10.10.20.1/24) and an OPT1 (gateway 10.10.21.1/24). I also have a LAN (static 10.10.12.1/24, DHCP 10.10.12.128-199/24). I want to create rules so that traffic coming from LAN go through WAN if the source IP address is below 10.10.12.128/24 and through OPT1 otherwise. I would I go and make that happen? Thanks!

    Read the article

  • LXC container can only access host via bridge

    - by vitaut
    I have an LXC container with i686 Ubuntu 12.04 running on a x86_64 Ubuntu 12.04 host. I've set up a bridge using instructions here. However the ping from the container only goes through to the host and not to other machines on the local network. Similarly only the host and not the other machines see the container OS. The host's /etc/network/interfaces file looks as follows: auto lo iface lo inet loopback iface eth0 inet manual auto br0 iface br0 inet dhcp bridge_ports eth0 bridge_fd 0 bridge_maxwait 0 The container's /etc/network/interfaces file looks as follows: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp And here's the relevant part of the container's config: lxc.network.type=veth lxc.network.link=br0 lxc.network.flags=up Any ideas what I'm doing wrong? Additional info: The output of iptables-save on host: $ sudo iptables-save # Generated by iptables-save v1.4.12 on Sat Oct 26 06:06:48 2013 *filter :INPUT ACCEPT [6854:721708] :FORWARD ACCEPT [4067:538895] :OUTPUT ACCEPT [4967:522405] COMMIT # Completed on Sat Oct 26 06:06:48 2013 # Generated by iptables-save v1.4.12 on Sat Oct 26 06:06:48 2013 *nat :PREROUTING ACCEPT [82235:21547307] :INPUT ACCEPT [16:1070] :OUTPUT ACCEPT [9386:583359] :POSTROUTING ACCEPT [14693:1291952] -A POSTROUTING -s 10.0.3.0/24 ! -d 10.0.3.0/24 -j MASQUERADE COMMIT # Completed on Sat Oct 26 06:06:48 2013 The output of brctl show on host: $ brctl show bridge name bridge id STP enabled interfaces br0 8000.080027409684 no eth0 vethBkwWyV The output of ifconfig br0 on host: $ ifconfig br0 br0 Link encap:Ethernet HWaddr 08:00:27:40:96:84 inet addr:192.168.1.11 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fe40:9684/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:232863 errors:0 dropped:0 overruns:0 frame:0 TX packets:59518 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:34437354 (34.4 MB) TX bytes:198492871 (198.4 MB) The output of ifconfig eth0 on host: $ ifconfig eth0 eth0 Link encap:Ethernet HWaddr 08:00:27:40:96:84 inet6 addr: fe80::a00:27ff:fe40:9684/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:299419 errors:0 dropped:0 overruns:0 frame:0 TX packets:203569 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:59077446 (59.0 MB) TX bytes:372056540 (372.0 MB) The output of ifconfig eth0 on container: $ ifconfig eth0 eth0 Link encap:Ethernet HWaddr 00:16:3e:74:08:2b inet addr:192.168.1.12 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::216:3eff:fe74:82b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:81 errors:0 dropped:0 overruns:0 frame:0 TX packets:113 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8506 (8.5 KB) TX bytes:9021 (9.0 KB)

    Read the article

  • How to Edit Domain Password Complexity?

    - by Milad K. Awawdeh
    Hi All, :) My Domain Environment is 2 Domain Controller ( Main & Secondary ) DHCP Mail Server Internet Server & ISA Server 2 DNS Server Primary & Secondary My problem i tried to Remove Password Complexity in my 2 domain Controller but i still receive error message that the password doesn't meet password complexity and i tried to run gpupdate /force after i disabled password complexity and check other condition any one know why I use windows server 2003 Stand alone

    Read the article

  • How to configure 2 LAN Cards

    - by PatDiazJr
    How do we configure two (2) LAN cards on one computer. One LAN card is connected to the internet via the DSL through a router, configured as DHCP. The other LAN card is to be connected via our office's IP/VPN (for email and other office online processes). I know it could be done, but I do not know how. By the way, the operating system is Windows XP.

    Read the article

  • How to have your DNS servers forward queries for internet names

    - by Xavier Hutchinson
    I have 2 Domain Controllers / DNS servers on Windows 2012, their IPs are 10.0.1.10 and 10.0.1.11 Another server acts as the DHCP server for clients, and sets their primary and secondary DNS to the IP addresses of the previously mentioned domain controllers / DNS servers. However I cannot resolve internet domain names, presumably as they are not hosted on the DNS servers. So my question is what do I have to do on my setup to resolve external domains? Thank you! Xavier.

    Read the article

  • Microsoft VirtualPC Networking Issue

    - by Joda Maki
    I am using Microsoft VPC running the supplied microsoft images to test IE6/7. The ip addresses that get assigned to these images are via dhcp and get valid ip addresses in my subnet. They can access the external internet just fine. However, they cannot ping my host machine, nor can my host machine ping them (using internal ip addresses). Thus, they can't access my webserver to test with. How is this possible and how do I fix it?

    Read the article

  • TTL for PTR records on Windows 2003 Server DNS

    - by Kyle Brandt
    When I look at the TTL (Time to Live) for PTR records (Reverse Lookup Zone) on one of our Windows 2003 DNS servers I see some are at 15 minutes, others are at 20. They have "Delete this record when it becomes stale" checked. These PTR records are for workstations that get IPs from Windows DHCP, so I think that creates the PTR records dynamically? How is TTL for these records set?

    Read the article

  • Command-line connect to wired network for Ubuntu

    - by Tim
    I like to know how to use command-line to connect to a wired network in general for Ubuntu 8.10? In my case, I connect a cable to my laptop but it doesn't work with my WICD. So I like to try command-line method. Here is the ifconfig of my network adapters: $ ifconfig eth0 Link encap:Ethernet HWaddr 00:c0:9f:8d:23:74 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:19 Base address:0x1800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4457 errors:0 dropped:0 overruns:0 frame:0 TX packets:4457 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:493002 (493.0 KB) TX bytes:493002 (493.0 KB) wlan0 Link encap:Ethernet HWaddr 00:0e:9b:ab:56:19 UP BROADCAST NOTRAILERS PROMISC ALLMULTI MTU:576 Metric:1 RX packets:1508929 errors:0 dropped:0 overruns:0 frame:0 TX packets:768144 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:806027375 (806.0 MB) TX bytes:78834873 (78.8 MB) wlan0:avahi Link encap:Ethernet HWaddr 00:0e:9b:ab:56:19 inet addr:169.254.5.92 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST NOTRAILERS PROMISC ALLMULTI MTU:576 Metric:1 wmaster0 Link encap:UNSPEC HWaddr 00-0E-9B-AB-56-19-00-00-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Thanks and regards! UPDATE: Tried what oyvindio suggested. Here is the failing message: $ sudo dhclient3 eth0 There is already a pid file /var/run/dhclient.pid with pid 18279 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ mon0: unknown hardware address type 803 wmaster0: unknown hardware address type 801 mon0: unknown hardware address type 803 wmaster0: unknown hardware address type 801 Listening on LPF/eth0/00:c0:9f:8d:23:74 Sending on LPF/eth0/00:c0:9f:8d:23:74 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 No DHCPOFFERS received. No working leases in persistent database - sleeping.

    Read the article

  • Disable WLan if Wired/Cable Network is available

    - by ifischer
    The question says it all. All i want is that my W-Lan connection should be disabled whenever a wired connection is available. What would be the easiest way to do that in Ubuntu/Gnome? In all guides (for instance some about guessnet) i found i had to configure my whole network configuration (WPA keys, DHCP, ...), but i find that a bit too complicated for such a simple use case. I just want to disable wlan0 when eth0 is connected.

    Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >