Search Results

Search found 4270 results on 171 pages for 'mark dawson'.

Page 36/171 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

  • D-Link DNS-323 NAS firmware update

    - by Mark Beaton
    Hi all, I've got a D-Link DNS-323 NAS enclosure holding a bunch of multimedia files that I've (possibly stupidly) just updated the firmware on, from 1.03 to 1.08. The updater indicated it applied the firmware patch successfully, but after rebooting it I can no longer get into it via the web interface, either via the static IP I had assigned it before the update, or by any of the DHCP-assigned addresses that I can see are currently assigned by my router. The unit just sits there, with the drives (2x512 set up as RAID-1) thrashing away seemingly forever... So, my question - has anyone had a similar experience with one of these units? Any advice etc? I've googled the hell out of it, and can't find anything useful.

    Read the article

  • How to increase the disk cache of Windows 7

    - by Mark Christiaens
    Under Windows 7 (64 bit), I'm reading through 9000 moderately sized files. In total, there is more than 200 MB of data. Using Java (JDK 1.6.21) I'm iterating over the files. The first 1400 or so go at full speed but then speed drops off to 4ms per file. It turns out that the main cost is incurred simply by opening the files. I'm opening the files using new FileInputStream (and of course closing them in time to avoid file leaks). After some investigating, I see that Windows' disk cache is using only 100 MB or so of RAM although I have 8 GiB available. I've tried increasing the cache size using the CacheSet tool but any values I provide are considered out of range. I've also tried enabling the LargeSystemCache registry key but (after rebooting) the CacheSet tool still indicates I'm using 100 MB of cache (and doesn't increase during the test run). Does anybody have any suggestions to "encourage" Windows 7 to cache my 9000 files?

    Read the article

  • Amazon Elastic Terms and Conditions

    - by PP
    WARNING: Have you really read Amazon's Terms and Conditions? Would anybody seriously agree to this term on Amazon's Elastic services sign up page? 6.2. Restrictions with Respect to Use of Marks. Your use of any trademarks, service marks, service or trade names, logos, and other designations of AWS and its affiliates or licensors, hereinafter "Marks", shall strictly comply with the following provisions. You may use the Marks in conjunction with the display of the AWS Content and for the purpose of indicating that your Application was created using the Services. You may use the Marks only in the form in which we make them available to you and not in any manner that disparages Amazon, its affiliates or its licensors, or that otherwise dilutes any Mark. Other than your limited right to use the Marks as provided in this Agreement, we and our licensors retain all right, title, and interest in and to the Marks. You will not at any time now or in the future challenge or assist others to challenge the validity of the Marks, or attempt to register confusingly similar trademarks, trade names, service marks or logos. You agree to follow our the Trademark Use Guidelines posted on the Amazon Web Services™ Trademark Guidelines page (the "Trademark Guidelines") as those guidelines may change from time to time. The Trademark Guidelines are incorporated herein by reference. You must immediately discontinue use of any Mark as specified by us at any time in writing. We may modify any Marks provided to you at any time, and upon notice, you will use only the modified Marks and not the old Marks. Other than as specified in this Agreement, you may not use any trademark, service mark, trade name or other business identifier of Amazon or its affiliates unless you obtain Amazon's or its affiliates' prior written consent. The foregoing prohibition includes the use of "amazon," any other trademark of AWS, Amazon or its affiliates, or variations or misspellings of any of them, in the name of an Application or in a URL to the left of the top-level domain name (e.g., ".com", ".net", "co.uk", etc.)-for example, a URL such as "amazon.mydomain.com", "amaozn.com" or "amazonauctions.net" are expressly prohibited. Any use you make of the Marks shall inure to our benefit and you hereby irrevocably assign to us all right, title and interest in the same. In addition, you agree not to misrepresent or embellish the relationship between us and you, for example by implying that we support, sponsor, endorse, or contribute money to you or your business endeavors. If you are a large company and you want to use Amazon's services you must agree that: you may not use the word "amazon" in any domain name you control (even if you are a forestry company) you may not use any word Amazon choose to trademark in any domain you control (regardless of whether the name has a different meaning/purpose in your industry) from now until forever you will never dispute any claim Amazon makes on any word you or anybody else uses Seriously, who would sign such a thing?

    Read the article

  • Search audio file for pattern?

    - by Mark
    I want to split a very large audio file at certain points. At certain points a radio announcer comes on and says something like "deux radio" and it always sounds exactly the same (it's a recorded clip). So how can I find that bit of repeated audio through out the entire mp3? It would be nice if I could split at that point, but even if it spits out the times, I can split it with another program.

    Read the article

  • How to view status of software RAID 1 resynching?

    - by tputkonen
    I have two 500 GB disks and yesterday I mirrored first drive to the second one using software RAID 1. PC has now been on for 30 hours. Both disks say "Resynching", but there is no progress indicator. In addition, there is a small yellow exclamation mark on both disks. My questions are: How long could the synch take for 500 GB drive with about 150 GB of data? PC has 4 GBs of RAM and AMD dual core 4000+ Is there a way to monitor status of the synching? How can I check what the exclamation mark means?

    Read the article

  • Virtual Machine Network Architecture, Isolating Public and Private Networks

    - by Mark
    I'm looking for some insight into best practices for network traffic isolation within a virtual environment, specifically under VMWARE ESXi. Currently I have (in testing) 1 hardware server running ESXi but i expect to expand this to multiple pieces of hardware. The current setup is as follows: 1 pfsense VM, this VM accepts all outside (WAN/internet) traffic and performs firewall/port forwarding/NAT functionality. I have multiple public IP addresses sent to the this VM that are used for access to individual servers (via per incoming IP port forwarding rules). This VM is attached to the private (virtual) network that all other VMs are on. It also manages a VPN link into the private network with some access restrictions. This isn't the perimeter firewall but rather the firewall for this virtual pool only. I have 3 VMs that communicate with each other, as well as have some public access requirements: 1 LAMP server running an eCommerce site, public internet accessible 1 accounting server, access via windows server 2008 RDS services for remote access by users 1 inventory/warehouse management server, VPN to client terminals in warehouses These servers constantly talk with each other for data synchronization. Currently all the servers are on the same subnet/virtual network and connected to the internet through the pfsense VM. The pfsense firewall uses port forwarding and NAT to allow outside access to the servers for services and for server access to the internet. My main question is this: Is there a security benefit to adding a second virtual network adapter to each server and controlling traffic such that all server to server communication is on one separate virtual network, while any access to the outside world is routed through the other network adapter, through the firewall, and on the the internet. This is the type of architecture i would use if these were all physical servers, but i'm unsure if the networks being virtual changes the way i should approach locking down this system. Thank you for any thoughts or direction to any appropriate literature.

    Read the article

  • Deletion of SQL Profiler Trace files (.trc)

    - by Mark
    We've noticed a lot of .trc files in our SQL data folder (\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data) on our server. The date range for these files spans over one day and the total file size of all files together is about 21 gigs. I'd like to free up this space but I'm not sure if I can just delete the files manually through Windows Explorer or if I need to do anything in SQL, like run a command or script. Any ideas?

    Read the article

  • IIS login / logout interferes with media player

    - by Mark Sowul
    So I'm listening to music with Windows Media Player, going insane because the music randomly stops playback every so often. I finally notice that it correlates with instances of csrss, winlogon, and logonui repeatedly starting and quitting. I finally tracked that down to IIS repeatedly logging on and off due to WebDAV requests going through my user account (my laptop syncing up with OneNote over WebDAV). I see tons of spam in my security event log for the logins. I am surprised that IIS needs to log in this much. This has only been happening for a couple of months. I'm not sure where the actual problem lies - with IIS, or Media Player, or what, so I figured I'd try and find out if the IIS login behavior is actually abnormal. Is it normal for IIS to log in this much? And is it normal for that to keep spawning winlogon, csrss, and logonui every second or so? I see a constant stream of logon events in the event log every few seconds presumably while OneNote is syncing. Logon (id = 1, source = laptop), Special Logon (id = 1, sets up privileges), Special Logon (id = 1, seems to set up the same privileges), Logon (id = 2, same laptop), Logoff (id = 2), Logoff (id = 1) The DefaultAppPool (only one apparently in use) has its idle timeout set to 20 minutes, and load user profile set to false. Not sure what other settings (if any) might be relevant.

    Read the article

  • Fast Bookmarking In Firefox

    - by Kije
    Making bookmarks in Firefox has become tedious. Can any one point me to a bookmarking extension that works as follows... Decide you want to bookmark a page Left click your way to the target bookmark folder Right the target bookmark folder to get a "Bookmark this page here" option. (It is this "Bookmark this page here" add on that I am looking for) (Edit the book mark title tags etc) Click done Currently you have to: Decide you want to bookmark a page Click on the bookmarks menu pulldown Click on "bookmark this page" Click on the "folder" pulldown Click on "Bookmarks tool bar" or "Bookmarks menu" Left click your way to the target bookmark folder (in a teeny window that that doesn't move the focus as you expand folders) (Edit the book mark title tags etc) Click "Done" That would be four (or five) steps to replace the seven (or eight) steps to make a bookmark in an existing folder. @Chris I assume you are referring me to "Read It Later" http://www.ideashower.com/ideas/launched/read-it-later/ I'll take a look.

    Read the article

  • Overwrite text in Windows Notepad

    - by Mark Miller
    I would like to be able to overwrite text in Windows Notepad. I am using Windows 7 Professional. Ideally I would like to be able to position the cursor next to a string of text and erase that text by pressing the spacebar until the cursor has passed over every character in the string without adding additional spaces to the document. Is that possible? I have tried pressing the 'Insert' key, but that does not help. Nor does using 'Num Lock' and pressing the 'Ins' or '0' key. Unfortunately, I have not been able to find a solution elsewhere on the internet. I do not think I am using notepad++. The application is listed as 'notepad.exe' under 'Properties'. Thank you for any suggestions.

    Read the article

  • WiFi & GbE Slow while Both Active.

    - by Mark Tomlin
    I'm having a problem with my WiFi network connection when I use my wired GbE connection concurrently on my Laptop. I'm using my WiFi for Internet access, and general web surfing and I'm using my GbE connection to connect to my PlayStation so I can stream media. The WiFi connection is via a Linksys 610N connected to my Cable Modem. Where as the GbE connection is a direct connection from my Ethernet port to the Ethernet port of the PS3 via a Cat-5 cable (no router in between this connection). As soon as I connect the cable from the PS3 to my Ethernet port on my Laptop the WiFi connection slows to a halt, but then allows for a connection to the web as normal but at much slower speeds for the things like BitTorrent that stops completely. It seems to me that Windows can't handle both connections at once. It will have both active but it can only accept and send packets on one device at one time. I can get WiFi connections to work to go to websites and the like, but once I use my GbE connection to share media between my Laptop and my PS3 the Wifi connection dies out and I no longer have access to the internet. I setup my connection on the PS3 and the Laptop following the insturctions posted here: http://forums.finalgear.com/problems/s14e01-ps3-size-problem-40642/#post1188132 And the following is the results of my ipconfig. Windows IP Configuration Host Name . . . . . . . . . . . . : dygear Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter WiFi: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) PRO/Wireless 3945ABG Network Connection Physical Address. . . . . . . . . : 00-19-**-**-**-** Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.111 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 167.206.254.2 167.206.254.1 Lease Obtained. . . . . . . . . . : Wednesday, May 19, 2010 08:55:30 Lease Expires . . . . . . . . . . : Thursday, May 20, 2010 08:55:30 Ethernet adapter LAN: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet Physical Address. . . . . . . . . : 00-16-**-**-**-** Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.1.50 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Any ideas?

    Read the article

  • Reliability of S.M.A.R.T.?

    - by Mark
    I've been using ActiveSmart to monitor my hard-drives health for a few weeks now, and its telling me my brand new 1.5 TB hard-drive is half-dead already. About on-par with one of my hard-drives which I know is at least half dead because I've been having some read errors and heard ticking noises. Now I haven't actually noticed any problems with my 1.5 TB drive; should I be concerned that it's going to crap out on me too? Or could ActiveSmart be giving a mis-diagnosis because I use it a lot or something (I've used up 795 GB in the 2 and a half weeks I've had it). The events that ActiveSmart has been catching is "Hardware ECC recovered". Maybe these new fangled super big hard-drives somehow rely on ECCs to squeeze out the extra space, but this isn't actually a cause for concern?

    Read the article

  • Login on VMWare XP guest machine keeps locking user AD account

    - by mark
    Environment: Windows 2003 AD Host: Windows 7 Pro VMWare Guest: Windows XP I use a normal user but I also have AD Admin rights (via another user). I use my AD account to login on the host as well on the aforementioned guest system. They don't share their profiles, so no problems here. I had reason to change my user (AD) password. When I did this, the guest was suspended but my user was logged in. A few days after my password change I resumed the guest. I was able to work but couldn't access networked mapped drives. I logged out and tried to log in again. At this point I realized that I initially was logged in with a user from a point before I changed my password. I logged in again with the new password, but then things went bad. I was able to successfully log in to my XP guest, however once that was completed, my AD user account got locked. This now also affected my user on the host. I was able to unlock the account, but there is still this problem: I log in via my new password into the guest and then my AD account gets locked. I'm successfully logged into the guest, but I can't access network shares from the AD server. If I don't unlock my account on the AD server, I will get further problems with my AD user. I tried multiple things, none worked: removed XP guest from AD, deleted all users, even my XP AD user profile on the guest, added machine to the AD, logged in - log in successful, account locked I resumed an older state of my guest (sometimes from the last year even) but the problem still persists. I tried this with disabled networking when the old machine state is resumed and so on, but no luck. It seems to me, although only my account is locked, this is somehow connected to the guest machine itself. I really want to avoid re-installation. This guest image was my old workstation which I virtualized once I moved to W7 pro and thus is still very valueable or me. I can work locally on the guest once logged in, but I can't access any network shares which is a problem. thanks

    Read the article

  • mysql client fails to start on command line

    - by Mark Basmayor
    Hi, I have been using the mysql command line client a lot before but I suddenly start getting this error when I try to launch it. mysql: relocation error: mysql: symbol strmov_overlapp, version libmysqlclient_16 not defined in file libmysqlclient.so.16 with link time reference The only significant event that comes into my mind is updating from Ubuntu 9.10 to 10.4. I'm not sure if there's anything else that I did to mess it up. I tried uninstalling both the mysql server and mysql client like so but to no avail. sudo aptitude purge mysql-server-5.1 Any help will be much appreciated, thanks.

    Read the article

  • Capture STDOUT/STDERR of Windows Applictation

    - by Mark Roddy
    I am using an open source application (conkeror) which is configured via a file containing javascript. Any issues with the javascript is printed to the console. This is fine under Linux as all the information is shown as long as the it is started from a shell. However, under Windows none of the information is show even when started from a shell. Is there a way to make this information displayed in the shell or to capture it in say a file?

    Read the article

  • Jan 2010 Microsoft update trashed my Win XP (64bit) PC

    - by Mark Pawelek
    I waited until this morning to install these 5 updates. My ancient Win XP (32 bit) PC has no problems but my Win XP 64 bit will not start. From the startup menu none of the 5 options given (e.g. safe mode, last known good configuration, etc) work. After selecting an option, the Windows Logo screen appears. About 9 seconds later a blue screen of death flashes [I can't read the error messages because it's there for about 100 ms] then it cycles through the reboot again. PS: This is a pretty cheap mobo (Ge Force) with an AMD 3 GH chip - but until today it did actually work. What should I do? Reinstall the O/S?

    Read the article

  • How to get Atheros ar242x wireless adapter working under Debian Linux?

    - by Mark
    Does anybody know how to get the Atheros ar242x wireless adapter working under Debian Linux (5.0.2 and/or 5.0.3)? My Debian live CDs and install CDs both don't like this card at all. Curisouly, it seems to work on other, Debian-based, Linuxes. Is this a free/non-free Driver issue? I know Debian gets mardy about that. Although for what it's worth, the Live CD doesn't seem to detect my wired LAN connection either... Specifically this is on a Samsung R610 laptop (some version of which seem to have an intel wireless adapter - this one definitely doesn't!) I've tried all sorts of things but obviously on a live CD installing software is limited. I've also tinkerering with network config files and kernel modules etc but to no avail.

    Read the article

  • Create Virtual Image of Laptop before Formatting

    - by Simon Mark Smith
    I have a 3 year old laptop running Windows XP that I used for business. Although I have not used the laptop in over a year, I now want to re-commission it with Windows 7 and a fresh install. Before I do the fresh install I want to create a Virtual Image of the laptop that I can keep and potentially run on my desktop machine should I ever need to access any of the old files/projects that it contains currently. I know that most people will say just copy the files over to your desktop, but my concern is the configuration of the laptop. I used to use it for development and it has older versions of Visual Studio, SQL Server, Active X controls etc, etc than I currently use so I really want to preserve the environment not just the files. So really I am asking what is the best tool-set/method to achieve this? I understand there are free VM tools available but I have never done this before and would appreciate any help.

    Read the article

  • 2d & 3d CAD software on the MAC [closed]

    - by Mark Smith
    Hey I was wondering what 2d & 3d CAD softwares people use on the mac? There are a couple of other questions like this on the site but they're over a year old and knowing how fast paced the software game is I thought i'd repost! I use MacDraft for my 2d drafting and the same companies Interiors Pro for my 3d work, have done for a while. I used Rhino 4.0 at uni but being a student I had to find software that wasn't thousands of £$£$!! thus stumbling onto the Microspot products. Anybody using the software or found any other bargains out there?

    Read the article

  • How to authenticate users in nested groups in Apache LDAP?

    - by mark
    I've working LDAP authentication with the following setup AuthName "whatever" AuthType Basic AuthBasicProvider ldap AuthLDAPUrl "ldap://server/OU=SBSUsers,OU=Users,OU=MyBusiness,DC=company,DC=local?sAMAccountName?sub?(objectClass=*)" Require ldap-group CN=MySpecificGroup,OU=Security Groups,OU=MyBusiness,DC=company,DC=local This works, however I've to put all users I want to authenticate into MySpecificGroup. But on LDAP server I've configured that MySpecificGroup also contains the group MyOtherGroup with another list of users. But those users in MyOtherGroup are not authenticated, I've to manually add them all to MySpecificGroup and basically can't use the nested grouping. I'm using Windows SBS 2003. Is there a way to configure Apache LDAP to do this? Or is there a problem with possible infinite recursion and thus not allowed?

    Read the article

  • Question about Linux Device Drivers.

    - by smwikipedia
    I have just installed the Xubuntu. My box runs quite slower than before when installed with a Win7. I am wondering if I am missing some device drivers. I can use gnome-device-manager to list my devices. In the device list view, I saw several blue question mark on the left side of devices. Based on my windows experience, the question mark should indicate the device is not properly configured. Is it the same with gnome-device-manager? And most importantly, how could I know for sure whether or not the corresponding device drivers have been installed? Many thanks.

    Read the article

  • What is the optimum way to secure a company wide wiki?

    - by Mark Robinson
    We have a wiki which is used by over half our company. Generally it has been very positively received. However, there is a concern over security - not letting confidential information fall into the wrong hands (i.e. competitors). The default answer is to create a complicated security matrix defining who can read what document (wiki page) based on who created it. Personally I think this mainly solves the wrong problem because it creates barriers within the company instead of a barrier to the external world. But some are concerned that people at a customer site might share information with a customer which then goes to the competitor. The administration of such a matrix is a nightmare because (1) the matrix is based on department and not projects (this is a matrix organisation), and (2) because in a wiki all pages are by definition dynamic so what is confidential today might not be confidential tomorrow (but the history is always readable!). Apart from the security matrix, we've considered restricting content on the wiki to non super secret stuff, but off course that needs to be monitored. Another solution (the current) is to monitor views and report anything suspicious (e.g. one person at a customer site having 2000 views in two days was reported). Again - this is not ideal because this does not directly imply a wrong motive. Does anyone have a better solution? How can a company wide wiki be made secure and yet keep its low threshold USP? BTW we use MediaWiki with Lockdown to exclude some administrative staff.

    Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >