Search Results

Search found 6898 results on 276 pages for 'messages'.

Page 36/276 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

• rsyslogd not monitoring all files

  - by Tom O'Connor

  So.. I've installed Logstash, and instead of using the logstash shipper (because it needs the JVM and is generally massive), I'm using rsyslogd with the following configuration. # Use traditional timestamp format $ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat $IncludeConfig /etc/rsyslog.d/*.conf # Provides kernel logging support (previously done by rklogd) $ModLoad imklog # Provides support for local system logging (e.g. via logger command) $ModLoad imuxsock # Log all kernel messages to the console. # Logging much else clutters up the screen. #kern.* /dev/console # Log anything (except mail) of level info or higher. # Don't log private authentication messages! *.info;mail.none;authpriv.none;cron.none;local6.none /var/log/messages # The authpriv file has restricted access. authpriv.* /var/log/secure # Log all the mail messages in one place. mail.* -/var/log/maillog # Log cron stuff cron.* /var/log/cron # Everybody gets emergency messages *.emerg * # Save news errors of level crit and higher in a special file. uucp,news.crit /var/log/spooler # Save boot messages also to boot.log local7.* /var/log/boot.log In /etc/rsyslog.d/logstash.conf there are 28 file monitor blocks using imfile $ModLoad imfile # Load the imfile input module $ModLoad imklog # for reading kernel log messages $ModLoad imuxsock # for reading local syslog messages $InputFileName /var/log/rabbitmq/startup_err $InputFileTag rmq-err: $InputFileStateFile state-rmq-err $InputFileFacility local6 $InputRunFileMonitor .... $InputFileName /var/log/some.other.custom.log $InputFileTag cust-log: $InputFileStateFile state-cust-log $InputFileFacility local6 $InputRunFileMonitor .... *.* @@10.90.0.110:5514 There are 28 InputFileMonitor blocks, each monitoring a different custom application logfile.. If I run [root@secret-gm02 ~]# lsof|grep rsyslog rsyslogd 5380 root cwd DIR 253,0 4096 2 / rsyslogd 5380 root rtd DIR 253,0 4096 2 / rsyslogd 5380 root txt REG 253,0 278976 1015955 /sbin/rsyslogd rsyslogd 5380 root mem REG 253,0 58400 1868123 /lib64/libgcc_s-4.1.2-20080825.so.1 rsyslogd 5380 root mem REG 253,0 144776 1867778 /lib64/ld-2.5.so rsyslogd 5380 root mem REG 253,0 1718232 1867780 /lib64/libc-2.5.so rsyslogd 5380 root mem REG 253,0 23360 1867787 /lib64/libdl-2.5.so rsyslogd 5380 root mem REG 253,0 145872 1867797 /lib64/libpthread-2.5.so rsyslogd 5380 root mem REG 253,0 85544 1867815 /lib64/libz.so.1.2.3 rsyslogd 5380 root mem REG 253,0 53448 1867801 /lib64/librt-2.5.so rsyslogd 5380 root mem REG 253,0 92816 1868016 /lib64/libresolv-2.5.so rsyslogd 5380 root mem REG 253,0 20384 1867990 /lib64/rsyslog/lmnsd_ptcp.so rsyslogd 5380 root mem REG 253,0 53880 1867802 /lib64/libnss_files-2.5.so rsyslogd 5380 root mem REG 253,0 23736 1867800 /lib64/libnss_dns-2.5.so rsyslogd 5380 root mem REG 253,0 20768 1867988 /lib64/rsyslog/lmnet.so rsyslogd 5380 root mem REG 253,0 11488 1867982 /lib64/rsyslog/imfile.so rsyslogd 5380 root mem REG 253,0 24040 1867983 /lib64/rsyslog/imklog.so rsyslogd 5380 root mem REG 253,0 11536 1867987 /lib64/rsyslog/imuxsock.so rsyslogd 5380 root mem REG 253,0 13152 1867989 /lib64/rsyslog/lmnetstrms.so rsyslogd 5380 root mem REG 253,0 8400 1867992 /lib64/rsyslog/lmtcpclt.so rsyslogd 5380 root 0r REG 0,3 0 4026531848 /proc/kmsg rsyslogd 5380 root 1u IPv4 1200589517 0t0 TCP 10.10.10.90 t:40629->10.10.10.90:5514 (ESTABLISHED) rsyslogd 5380 root 2u IPv4 1200589527 0t0 UDP *:45801 rsyslogd 5380 root 3w REG 253,3 17999744 2621483 /var/log/messages rsyslogd 5380 root 4w REG 253,3 13383 2621484 /var/log/secure rsyslogd 5380 root 5w REG 253,3 7180 2621493 /var/log/maillog rsyslogd 5380 root 6w REG 253,3 43321 2621529 /var/log/cron rsyslogd 5380 root 7w REG 253,3 0 2621494 /var/log/spooler rsyslogd 5380 root 8w REG 253,3 0 2621495 /var/log/boot.log rsyslogd 5380 root 9r REG 253,3 1064271998 2621464 /var/log/custom-application.monolog.log rsyslogd 5380 root 10u unix 0xffff81081fad2e40 0t0 1200589511 /dev/log You can see that there are nowhere near 28 logfiles actually being read. I really had to get one file monitored, so I moved it to the top, and it picked it up, but I'd like to be able to monitor all 28+ files, and not have to worry. OS is Centos 5.5 Kernel 2.6.18-308.el5 rsyslogd 3.22.1, compiled with: FEATURE_REGEXP: Yes FEATURE_LARGEFILE: Yes FEATURE_NETZIP (message compression): Yes GSSAPI Kerberos 5 support: Yes FEATURE_DEBUG (debug build, slow code): No Atomic operations supported: Yes Runtime Instrumentation (slow code): No Questions: Why is rsyslogd only monitoring a very small subset of the files? How can I fix this so that all the files are monitored?

  Read the article

• ClickOnce manifest problem

  - by TWith2Sugars

  We are currently deploying a WPF 4 app via click once and there is a scenario when the installation fails. If the user does not have .Net 4.0 Full install and attempts to install our app the framework installs fine but the app fails to install. If we re-run the installation again the app installs fine. Here is a copy of the log: PLATFORM VERSION INFO Windows : 6.1.7600.0 (Win32NT) Common Language Runtime : 2.0.50727.4927 System.Deployment.dll : 2.0.50727.4927 (NetFXspW7.050727-4900) mscorwks.dll : 2.0.50727.4927 (NetFXspW7.050727-4900) dfdll.dll : 2.0.50727.4927 (NetFXspW7.050727-4900) dfshim.dll : 4.0.31106.0 (Main.031106-0000) SOURCES Deployment url : [URL REMOVED] Server : Apache/2.0.54 Application url : [URL REMOVED] Server : Apache/2.0.54 IDENTITIES Deployment Identity : Graphicly.App.application, Version=0.3.2.0, Culture=neutral, PublicKeyToken=c982228345371fbc, processorArchitecture=msil Application Identity : Graphicly.App.exe, Version=0.3.2.0, Culture=neutral, PublicKeyToken=c982228345371fbc, processorArchitecture=msil, type=win32 APPLICATION SUMMARY * Installable application. ERROR SUMMARY Below is a summary of the errors, details of these errors are listed later in the log. * Dependency Graphicly.WCFClient.dll cannot be processed for patching. Following failure messages were detected: + Exception occurred loading manifest from file Graphicly.WCFClient.dll: the manifest may not be valid or the file could not be opened. + Cannot load internal manifest from component file. * Dependency Microsoft.Surface.Presentation.Design.dll cannot be processed for patching. Following failure messages were detected: + Exception occurred loading manifest from file Microsoft.Surface.Presentation.Design.dll: the manifest may not be valid or the file could not be opened. + Cannot load internal manifest from component file. * Dependency GalaSoft.MvvmLight.WPF4.dll cannot be processed for patching. Following failure messages were detected: + Exception occurred loading manifest from file GalaSoft.MvvmLight.WPF4.dll: the manifest may not be valid or the file could not be opened. + Cannot load internal manifest from component file. * Dependency Graphicly.Infrastructure.dll cannot be processed for patching. Following failure messages were detected: + Exception occurred loading manifest from file Graphicly.Infrastructure.dll: the manifest may not be valid or the file could not be opened. + Cannot load internal manifest from component file. * Dependency Graphicly.AutoUpdater.dll cannot be processed for patching. Following failure messages were detected: + Exception occurred loading manifest from file Graphicly.AutoUpdater.dll: the manifest may not be valid or the file could not be opened. + Cannot load internal manifest from component file. * Dependency System.Windows.Interactivity.dll cannot be processed for patching. Following failure messages were detected: + Exception occurred loading manifest from file System.Windows.Interactivity.dll: the manifest may not be valid or the file could not be opened. + Cannot load internal manifest from component file. * Dependency Microsoft.Surface.Presentation.dll cannot be processed for patching. Following failure messages were detected: + Exception occurred loading manifest from file Microsoft.Surface.Presentation.dll: the manifest may not be valid or the file could not be opened. + Cannot load internal manifest from component file. * Dependency Graphicly.Fonts.dll cannot be processed for patching. Following failure messages were detected: + Exception occurred loading manifest from file Graphicly.Fonts.dll: the manifest may not be valid or the file could not be opened. + Cannot load internal manifest from component file. * Dependency Graphicly.Reader.dll cannot be processed for patching. Following failure messages were detected: + Exception occurred loading manifest from file Graphicly.Reader.dll: the manifest may not be valid or the file could not be opened. + Cannot load internal manifest from component file. * Dependency Microsoft.Surface.Presentation.Generic.dll cannot be processed for patching. Following failure messages were detected: + Exception occurred loading manifest from file Microsoft.Surface.Presentation.Generic.dll: the manifest may not be valid or the file could not be opened. + Cannot load internal manifest from component file. * Dependency Graphicly.Controls.dll cannot be processed for patching. Following failure messages were detected: + Exception occurred loading manifest from file Graphicly.Controls.dll: the manifest may not be valid or the file could not be opened. + Cannot load internal manifest from component file. * Dependency Graphicly.SocialNetwork.dll cannot be processed for patching. Following failure messages were detected: + Exception occurred loading manifest from file Graphicly.SocialNetwork.dll: the manifest may not be valid or the file could not be opened. + Cannot load internal manifest from component file. * Dependency Graphicly.Archive.dll cannot be processed for patching. Following failure messages were detected: + Exception occurred loading manifest from file Graphicly.Archive.dll: the manifest may not be valid or the file could not be opened. + Cannot load internal manifest from component file. * Dependency Graphicly.App.exe cannot be processed for patching. Following failure messages were detected: + Exception occurred loading manifest from file Graphicly.App.exe: the manifest may not be valid or the file could not be opened. + Cannot load internal manifest from component file. * Dependency GalaSoft.MvvmLight.Extras.WPF4.dll cannot be processed for patching. Following failure messages were detected: + Exception occurred loading manifest from file GalaSoft.MvvmLight.Extras.WPF4.dll: the manifest may not be valid or the file could not be opened. + Cannot load internal manifest from component file. * Activation of [URL REMOVED] resulted in exception. Following failure messages were detected: + Exception occurred loading manifest from file GalaSoft.MvvmLight.Extras.WPF4.dll: the manifest may not be valid or the file could not be opened. + Cannot load internal manifest from component file. COMPONENT STORE TRANSACTION FAILURE SUMMARY No transaction error was detected. WARNINGS * The file named Microsoft.Windows.Design.Extensibility.dll does not have a hash specified in the manifest. Hash validation will be ignored. * The file named Ionic.Zip.Reduced.dll does not have a hash specified in the manifest. Hash validation will be ignored. * The file named Newtonsoft.Json.dll does not have a hash specified in the manifest. Hash validation will be ignored. * The file named Microsoft.WindowsAzure.StorageClient.dll does not have a hash specified in the manifest. Hash validation will be ignored. * The file named Dimebrain.TweetSharp.dll does not have a hash specified in the manifest. Hash validation will be ignored. * The file named Microsoft.Windows.Design.Interaction.dll does not have a hash specified in the manifest. Hash validation will be ignored. * The file named HtmlAgilityPack.dll does not have a hash specified in the manifest. Hash validation will be ignored. * The file named Facebook.dll does not have a hash specified in the manifest. Hash validation will be ignored. OPERATION PROGRESS STATUS * [20/05/2010 09:17:33] : Activation of [URL REMOVED] has started. * [20/05/2010 09:17:38] : Processing of deployment manifest has successfully completed. * [20/05/2010 09:17:38] : Installation of the application has started. * [20/05/2010 09:17:39] : Processing of application manifest has successfully completed. * [20/05/2010 09:17:40] : Request of trust and detection of platform is complete. ERROR DETAILS Following errors were detected during this operation. * [20/05/2010 09:17:40] System.Deployment.Application.InvalidDeploymentException (ManifestLoad) - Exception occurred loading manifest from file Graphicly.WCFClient.dll: the manifest may not be valid or the file could not be opened. - Source: System.Deployment - Stack trace: at System.Deployment.Application.Manifest.AssemblyManifest.ManifestLoadExceptionHelper(Exception exception, String filePath) at System.Deployment.Application.Manifest.AssemblyManifest.LoadFromInternalManifestFile(String filePath) at System.Deployment.Application.FileDownloader.AddFilesInHashtable(Hashtable hashtable, AssemblyManifest applicationManifest, String applicationFolder) --- Inner Exception --- System.Deployment.Application.DeploymentException (InvalidManifest) - Cannot load internal manifest from component file. - Source: - Stack trace: * [20/05/2010 09:17:40] System.Deployment.Application.InvalidDeploymentException (ManifestLoad) - Exception occurred loading manifest from file Microsoft.Surface.Presentation.Design.dll: the manifest may not be valid or the file could not be opened. - Source: System.Deployment - Stack trace: at System.Deployment.Application.Manifest.AssemblyManifest.ManifestLoadExceptionHelper(Exception exception, String filePath) at System.Deployment.Application.Manifest.AssemblyManifest.LoadFromInternalManifestFile(String filePath) at System.Deployment.Application.FileDownloader.AddFilesInHashtable(Hashtable hashtable, AssemblyManifest applicationManifest, String applicationFolder) --- Inner Exception --- System.Deployment.Application.DeploymentException (InvalidManifest) - Cannot load internal manifest from component file. - Source: - Stack trace: * [20/05/2010 09:17:40] System.Deployment.Application.InvalidDeploymentException (ManifestLoad) - Exception occurred loading manifest from file GalaSoft.MvvmLight.WPF4.dll: the manifest may not be valid or the file could not be opened. - Source: System.Deployment - Stack trace: at System.Deployment.Application.Manifest.AssemblyManifest.ManifestLoadExceptionHelper(Exception exception, String filePath) at System.Deployment.Application.Manifest.AssemblyManifest.LoadFromInternalManifestFile(String filePath) at System.Deployment.Application.FileDownloader.AddFilesInHashtable(Hashtable hashtable, AssemblyManifest applicationManifest, String applicationFolder) --- Inner Exception --- System.Deployment.Application.DeploymentException (InvalidManifest) - Cannot load internal manifest from component file. - Source: - Stack trace: * [20/05/2010 09:17:40] System.Deployment.Application.InvalidDeploymentException (ManifestLoad) - Exception occurred loading manifest from file Graphicly.Infrastructure.dll: the manifest may not be valid or the file could not be opened. - Source: System.Deployment - Stack trace: at System.Deployment.Application.Manifest.AssemblyManifest.ManifestLoadExceptionHelper(Exception exception, String filePath) at System.Deployment.Application.Manifest.AssemblyManifest.LoadFromInternalManifestFile(String filePath) at System.Deployment.Application.FileDownloader.AddFilesInHashtable(Hashtable hashtable, AssemblyManifest applicationManifest, String applicationFolder) --- Inner Exception --- System.Deployment.Application.DeploymentException (InvalidManifest) - Cannot load internal manifest from component file. - Source: - Stack trace: * [20/05/2010 09:17:40] System.Deployment.Application.InvalidDeploymentException (ManifestLoad) - Exception occurred loading manifest from file Graphicly.AutoUpdater.dll: the manifest may not be valid or the file could not be opened. - Source: System.Deployment - Stack trace: at System.Deployment.Application.Manifest.AssemblyManifest.ManifestLoadExceptionHelper(Exception exception, String filePath) at System.Deployment.Application.Manifest.AssemblyManifest.LoadFromInternalManifestFile(String filePath) at System.Deployment.Application.FileDownloader.AddFilesInHashtable(Hashtable hashtable, AssemblyManifest applicationManifest, String applicationFolder) --- Inner Exception --- System.Deployment.Application.DeploymentException (InvalidManifest) - Cannot load internal manifest from component file. - Source: - Stack trace: * [20/05/2010 09:17:40] System.Deployment.Application.InvalidDeploymentException (ManifestLoad) - Exception occurred loading manifest from file System.Windows.Interactivity.dll: the manifest may not be valid or the file could not be opened. - Source: System.Deployment - Stack trace: at System.Deployment.Application.Manifest.AssemblyManifest.ManifestLoadExceptionHelper(Exception exception, String filePath) at System.Deployment.Application.Manifest.AssemblyManifest.LoadFromInternalManifestFile(String filePath) at System.Deployment.Application.FileDownloader.AddFilesInHashtable(Hashtable hashtable, AssemblyManifest applicationManifest, String applicationFolder) --- Inner Exception --- System.Deployment.Application.DeploymentException (InvalidManifest) - Cannot load internal manifest from component file. - Source: - Stack trace: * [20/05/2010 09:17:40] System.Deployment.Application.InvalidDeploymentException (ManifestLoad) - Exception occurred loading manifest from file Microsoft.Surface.Presentation.dll: the manifest may not be valid or the file could not be opened. - Source: System.Deployment - Stack trace: at System.Deployment.Application.Manifest.AssemblyManifest.ManifestLoadExceptionHelper(Exception exception, String filePath) at System.Deployment.Application.Manifest.AssemblyManifest.LoadFromInternalManifestFile(String filePath) at System.Deployment.Application.FileDownloader.AddFilesInHashtable(Hashtable hashtable, AssemblyManifest applicationManifest, String applicationFolder) --- Inner Exception --- System.Deployment.Application.DeploymentException (InvalidManifest) - Cannot load internal manifest from component file. - Source: - Stack trace: * [20/05/2010 09:17:40] System.Deployment.Application.InvalidDeploymentException (ManifestLoad) - Exception occurred loading manifest from file Graphicly.Fonts.dll: the manifest may not be valid or the file could not be opened. - Source: System.Deployment - Stack trace: at System.Deployment.Application.Manifest.AssemblyManifest.ManifestLoadExceptionHelper(Exception exception, String filePath) at System.Deployment.Application.Manifest.AssemblyManifest.LoadFromInternalManifestFile(String filePath) at System.Deployment.Application.FileDownloader.AddFilesInHashtable(Hashtable hashtable, AssemblyManifest applicationManifest, String applicationFolder) --- Inner Exception --- System.Deployment.Application.DeploymentException (InvalidManifest) - Cannot load internal manifest from component file. - Source: - Stack trace: * [20/05/2010 09:17:40] System.Deployment.Application.InvalidDeploymentException (ManifestLoad) - Exception occurred loading manifest from file Graphicly.Reader.dll: the manifest may not be valid or the file could not be opened. - Source: System.Deployment - Stack trace: at System.Deployment.Application.Manifest.AssemblyManifest.ManifestLoadExceptionHelper(Exception exception, String filePath) at System.Deployment.Application.Manifest.AssemblyManifest.LoadFromInternalManifestFile(String filePath) at System.Deployment.Application.FileDownloader.AddFilesInHashtable(Hashtable hashtable, AssemblyManifest applicationManifest, String applicationFolder) --- Inner Exception --- System.Deployment.Application.DeploymentException (InvalidManifest) - Cannot load internal manifest from component file. - Source: - Stack trace: * [20/05/2010 09:17:40] System.Deployment.Application.InvalidDeploymentException (ManifestLoad) - Exception occurred loading manifest from file Microsoft.Surface.Presentation.Generic.dll: the manifest may not be valid or the file could not be opened. - Source: System.Deployment - Stack trace: at System.Deployment.Application.Manifest.AssemblyManifest.ManifestLoadExceptionHelper(Exception exception, String filePath) at System.Deployment.Application.Manifest.AssemblyManifest.LoadFromInternalManifestFile(String filePath) at System.Deployment.Application.FileDownloader.AddFilesInHashtable(Hashtable hashtable, AssemblyManifest applicationManifest, String applicationFolder) --- Inner Exception --- System.Deployment.Application.DeploymentException (InvalidManifest) - Cannot load internal manifest from component file. - Source: - Stack trace: * [20/05/2010 09:17:41] System.Deployment.Application.InvalidDeploymentException (ManifestLoad) - Exception occurred loading manifest from file Graphicly.Controls.dll: the manifest may not be valid or the file could not be opened. - Source: System.Deployment - Stack trace: at System.Deployment.Application.Manifest.AssemblyManifest.ManifestLoadExceptionHelper(Exception exception, String filePath) at System.Deployment.Application.Manifest.AssemblyManifest.LoadFromInternalManifestFile(String filePath) at System.Deployment.Application.FileDownloader.AddFilesInHashtable(Hashtable hashtable, AssemblyManifest applicationManifest, String applicationFolder) --- Inner Exception --- System.Deployment.Application.DeploymentException (InvalidManifest) - Cannot load internal manifest from component file. - Source: - Stack trace: * [20/05/2010 09:17:41] System.Deployment.Application.InvalidDeploymentException (ManifestLoad) - Exception occurred loading manifest from file Graphicly.SocialNetwork.dll: the manifest may not be valid or the file could not be opened. - Source: System.Deployment - Stack trace: at System.Deployment.Application.Manifest.AssemblyManifest.ManifestLoadExceptionHelper(Exception exception, String filePath) at System.Deployment.Application.Manifest.AssemblyManifest.LoadFromInternalManifestFile(String filePath) at System.Deployment.Application.FileDownloader.AddFilesInHashtable(Hashtable hashtable, AssemblyManifest applicationManifest, String applicationFolder) --- Inner Exception --- System.Deployment.Application.DeploymentException (InvalidManifest) - Cannot load internal manifest from component file. - Source: - Stack trace: * [20/05/2010 09:17:41] System.Deployment.Application.InvalidDeploymentException (ManifestLoad) - Exception occurred loading manifest from file Graphicly.Archive.dll: the manifest may not be valid or the file could not be opened. - Source: System.Deployment - Stack trace: at System.Deployment.Application.Manifest.AssemblyManifest.ManifestLoadExceptionHelper(Exception exception, String filePath) at System.Deployment.Application.Manifest.AssemblyManifest.LoadFromInternalManifestFile(String filePath) at System.Deployment.Application.FileDownloader.AddFilesInHashtable(Hashtable hashtable, AssemblyManifest applicationManifest, String applicationFolder) --- Inner Exception --- System.Deployment.Application.DeploymentException (InvalidManifest) - Cannot load internal manifest from component file. - Source: - Stack trace: * [20/05/2010 09:17:41] System.Deployment.Application.InvalidDeploymentException (ManifestLoad) - Exception occurred loading manifest from file Graphicly.App.exe: the manifest may not be valid or the file could not be opened. - Source: System.Deployment - Stack trace: at System.Deployment.Application.Manifest.AssemblyManifest.ManifestLoadExceptionHelper(Exception exception, String filePath) at System.Deployment.Application.Manifest.AssemblyManifest.LoadFromInternalManifestFile(String filePath) at System.Deployment.Application.FileDownloader.AddFilesInHashtable(Hashtable hashtable, AssemblyManifest applicationManifest, String applicationFolder) --- Inner Exception --- System.Deployment.Application.DeploymentException (InvalidManifest) - Cannot load internal manifest from component file. - Source: - Stack trace: * [20/05/2010 09:17:41] System.Deployment.Application.InvalidDeploymentException (ManifestLoad) - Exception occurred loading manifest from file GalaSoft.MvvmLight.Extras.WPF4.dll: the manifest may not be valid or the file could not be opened. - Source: System.Deployment - Stack trace: at System.Deployment.Application.Manifest.AssemblyManifest.ManifestLoadExceptionHelper(Exception exception, String filePath) at System.Deployment.Application.Manifest.AssemblyManifest.LoadFromInternalManifestFile(String filePath) at System.Deployment.Application.FileDownloader.AddFilesInHashtable(Hashtable hashtable, AssemblyManifest applicationManifest, String applicationFolder) --- Inner Exception --- System.Deployment.Application.DeploymentException (InvalidManifest) - Cannot load internal manifest from component file. - Source: - Stack trace: * [20/05/2010 09:17:41] System.Deployment.Application.InvalidDeploymentException (ManifestLoad) - Exception occurred loading manifest from file GalaSoft.MvvmLight.Extras.WPF4.dll: the manifest may not be valid or the file could not be opened. - Source: System.Deployment - Stack trace: at System.Deployment.Application.Manifest.AssemblyManifest.ManifestLoadExceptionHelper(Exception exception, String filePath) at System.Deployment.Application.Manifest.AssemblyManifest.LoadFromInternalManifestFile(String filePath) at System.Deployment.Application.DownloadManager.ProcessDownloadedFile(Object sender, DownloadEventArgs e) at System.Deployment.Application.FileDownloader.DownloadModifiedEventHandler.Invoke(Object sender, DownloadEventArgs e) at System.Deployment.Application.FileDownloader.PatchSingleFile(DownloadQueueItem item, Hashtable dependencyTable) at System.Deployment.Application.FileDownloader.PatchFiles(SubscriptionState subState) at System.Deployment.Application.FileDownloader.Download(SubscriptionState subState) at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification notification, DownloadOptions options) at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp) at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc) at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl) at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state) --- Inner Exception --- System.Deployment.Application.DeploymentException (InvalidManifest) - Cannot load internal manifest from component file. - Source: - Stack trace: COMPONENT STORE TRANSACTION DETAILS No transaction information is available. I'm baffled. Any ideas what this could be? Cheers Tony

  Read the article

• HTG Explains: What The Windows Event Viewer Is and How You Can Use It

  - by Chris Hoffman

  The Windows Event Viewer shows a log of application and system messages – errors, information messages, and warnings. Scammers have used the Event Viewer to deceive people – event a properly functioning system will have error messages here. In one infamous scam, a person claiming to be from Microsoft phones someone up and instructs them to open the Event Viewer. The person is sure to see error messages here, and the scammer will ask for the person’s credit card number to fix them. As a rule of thumb, you can generally ignore all of the errors and warnings that appear in the Event Viewer – assuming your computer is working properly. HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows?

  Read the article

• Java Hint in NetBeans for Identifying JOptionPanes

  - by Geertjan

  I tend to have "JOptionPane.showMessageDialogs" scattered through my code, for debugging purposes. Now I have a way to identify all of them and remove them one by one, since some of them are there for users of the application so shouldn't be removed, via the Refactoring window: Identifying instances of code that I'm interested in is really trivial: import org.netbeans.spi.editor.hints.ErrorDescription; import org.netbeans.spi.java.hints.ConstraintVariableType; import org.netbeans.spi.java.hints.ErrorDescriptionFactory; import org.netbeans.spi.java.hints.Hint; import org.netbeans.spi.java.hints.HintContext; import org.netbeans.spi.java.hints.TriggerPattern; import org.openide.util.NbBundle.Messages; @Hint( displayName = "#DN_ShowMessageDialogChecker", description = "#DESC_ShowMessageDialogChecker", category = "general") @Messages({ "DN_ShowMessageDialogChecker=Found \"ShowMessageDialog\"", "DESC_ShowMessageDialogChecker=Checks for JOptionPane.showMes" }) public class ShowMessageDialogChecker { @TriggerPattern(value = "$1.showMessageDialog", constraints = @ConstraintVariableType(variable = "$1", type = "javax.swing.JOptionPane")) @Messages("ERR_ShowMessageDialogChecker=Are you sure you need this statement?") public static ErrorDescription computeWarning(HintContext ctx) { return ErrorDescriptionFactory.forName( ctx, ctx.getPath(), Bundle.ERR_ShowMessageDialogChecker()); } } Stick the above class, which seriously isn't much code at all, in a module and run it, with this result: Bit trickier to do the fix, i.e., add a bit of code to let the user remove the statement, but I looked in the NetBeans sources and used the System.out fix, which does the same thing:  import com.sun.source.tree.BlockTree; import com.sun.source.tree.StatementTree; import com.sun.source.util.TreePath; import java.util.ArrayList; import java.util.Iterator; import java.util.List; import org.netbeans.api.java.source.CompilationInfo; import org.netbeans.api.java.source.WorkingCopy; import org.netbeans.spi.editor.hints.ErrorDescription; import org.netbeans.spi.editor.hints.Fix; import org.netbeans.spi.java.hints.ConstraintVariableType; import org.netbeans.spi.java.hints.ErrorDescriptionFactory; import org.netbeans.spi.java.hints.Hint; import org.netbeans.spi.java.hints.HintContext; import org.netbeans.spi.java.hints.JavaFix; import org.netbeans.spi.java.hints.TriggerPattern; import org.openide.util.NbBundle.Messages; @Hint( displayName = "#DN_ShowMessageDialogChecker", description = "#DESC_ShowMessageDialogChecker", category = "general") @Messages({ "DN_ShowMessageDialogChecker=Found \"ShowMessageDialog\"", "DESC_ShowMessageDialogChecker=Checks for JOptionPane.showMes" }) public class ShowMessageDialogChecker { @TriggerPattern(value = "$1.showMessageDialog", constraints = @ConstraintVariableType(variable = "$1", type = "javax.swing.JOptionPane")) @Messages("ERR_ShowMessageDialogChecker=Are you sure you need this statement?") public static ErrorDescription computeWarning(HintContext ctx) { Fix fix = new FixImpl(ctx.getInfo(), ctx.getPath()).toEditorFix(); return ErrorDescriptionFactory.forName( ctx, ctx.getPath(), Bundle.ERR_ShowMessageDialogChecker(), fix); } private static final class FixImpl extends JavaFix { public FixImpl(CompilationInfo info, TreePath tp) { super(info, tp); } @Override @Messages("FIX_ShowMessageDialogChecker=Remove the statement") protected String getText() { return Bundle.FIX_ShowMessageDialogChecker(); } @Override protected void performRewrite(TransformationContext tc) throws Exception { WorkingCopy wc = tc.getWorkingCopy(); TreePath statementPath = tc.getPath(); TreePath blockPath = tc.getPath().getParentPath(); while (!(blockPath.getLeaf() instanceof BlockTree)) { statementPath = blockPath; blockPath = blockPath.getParentPath(); if (blockPath == null) { return; } } BlockTree blockTree = (BlockTree) blockPath.getLeaf(); List<? extends StatementTree> statements = blockTree.getStatements(); List<StatementTree> newStatements = new ArrayList<StatementTree>(); for (Iterator<? extends StatementTree> it = statements.iterator(); it.hasNext();) { StatementTree statement = it.next(); if (statement != statementPath.getLeaf()) { newStatements.add(statement); } } BlockTree newBlockTree = wc.getTreeMaker().Block(newStatements, blockTree.isStatic()); wc.rewrite(blockTree, newBlockTree); } } } Aside from now being able to use "Inspect & Refactor" to identify and fix all instances of JOptionPane.showMessageDialog at the same time, you can also do the fixes per instance within the editor:

  Read the article

• Yahoo! Messenger

  Yahoo's chat solution for exchanging instant messages with your friends

  Read the article

• Introducing NFakeMail

  - by João Angelo

  Ever had to resort to custom code to control emails sent by an application during integration and/or system testing? If you answered yes then you should definitely continue reading. NFakeMail makes it easier for developers to do integration/system testing on software that sends emails by providing a fake SMTP server. You’ll no longer have to manually validate the email sending process. It’s developed in C# and IronPython and targets the .NET 4.0 framework. With NFakeMail you can easily automate the testing of components that rely on sending mails while doing its job. Let’s take a look at some sample code, we start with a simple class containing a method that sends emails. class Notifier { public void Notify() { using (var smtpClient = new SmtpClient("localhost", 10025)) { smtpClient.Send("[email protected]", "[email protected]", "S1", "."); smtpClient.Send("[email protected]", "[email protected]", "S2", ".."); } } } Then to automate the tests for this method we only need to the following: [Test] public void Notify_T001() { using (var server = new FakeSmtpServer(10025)) { new Notifier().Notify(); // Verifies two messages are received in the next five seconds var messages = server.WaitForMessages(count: 2, timeout: 5000); // Verifies the message sender Debug.Assert(messages.All(m => m.From.Address == "[email protected]")); } } The created FakeSmtpServer instance will act as a simple SMTP server and intercept the messages sent by the Notifier class. It’s even possible to verify some fields of each intercepted message and by default all intercepted messages are saved to the file system in MIME format.

  Read the article

• Really Simple Log Writer

  Code to write messages to a log file, in a very simple way

  Read the article

• WebSocket API 1.1 released!

  - by Pavel Bucek

  Its my please to announce that JSR 356 – Java API for WebSocket maintenance release ballot vote finished with majority of “yes” votes (actually, only one eligible voter did not vote, all other votes were “yeses”). New release is maintenance release and it addresses only one issue:  WEBSOCKET_SPEC-226. What changed in the 1.1? Version 1.1 is fully backwards compatible with version 1.0, there are only two methods added to javax.websocket.Session: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 /** * Register to handle to incoming messages in this conversation. A maximum of one message handler per * native websocket message type (text, binary, pong) may be added to each Session. I.e. a maximum * of one message handler to handle incoming text messages a maximum of one message handler for * handling incoming binary messages, and a maximum of one for handling incoming pong * messages. For further details of which message handlers handle which of the native websocket * message types please see {@link MessageHandler.Whole} and {@link MessageHandler.Partial}. * Adding more than one of any one type will result in a runtime exception. * * @param clazz   type of the message processed by message handler to be registered. * @param handler whole message handler to be added. * @throws IllegalStateException if there is already a MessageHandler registered for the same native *                               websocket message type as this handler. */ public void addMessageHandler(Class<T> clazz, MessageHandler.Whole<T> handler); /** * Register to handle to incoming messages in this conversation. A maximum of one message handler per * native websocket message type (text, binary, pong) may be added to each Session. I.e. a maximum * of one message handler to handle incoming text messages a maximum of one message handler for * handling incoming binary messages, and a maximum of one for handling incoming pong * messages. For further details of which message handlers handle which of the native websocket * message types please see {@link MessageHandler.Whole} and {@link MessageHandler.Partial}. * Adding more than one of any one type will result in a runtime exception. * * * @param clazz   type of the message processed by message handler to be registered. * @param handler partial message handler to be added. * @throws IllegalStateException if there is already a MessageHandler registered for the same native *                               websocket message type as this handler. */ public void addMessageHandler(Class<T> clazz, MessageHandler.Partial<T> handler); Why do we need to add those methods? Short and not precise version: to support Lambda expressions as MessageHandlers. Longer and slightly more precise explanation: old Session#addMessageHandler method (which is still there and works as it worked till now) does rely on getting the generic parameter during the runtime, which is not (always) possible. The unfortunate part is that it works for some common cases and the expert group did not catch this issue before 1.0 release because of that. The issue is really clearly visible when Lambdas are used as message handlers: 1 2 3 session.addMessageHandler(message -> { System.out.println("### Received: " + message); }); There is no way for the JSR 356 implementation to get the type of the used Lambda expression, thus this call will always result in an exception. Since all modern IDEs do recommend to use Lambda expressions when possible and MessageHandler interfaces are single method interfaces, it basically just scream “use Lambdas” all over the place but when you do that, the application will fail during runtime. Only solution we currently have is to explicitly provide the type of registered MessageHandler. (There might be another sometime in the future when generic type reification is introduced, but that is not going to happen soon enough). So the example above will then be: 1 2 3 session.addMessageHandler(String.class, message -> { System.out.println("### Received: " + message); }); and voila, it works. There are some limitations – you cannot do 1 List<String>.class , so you will need to encapsulate these types when you want to use them in MessageHandler implementation (something like “class MyType extends ArrayList<String>”). There is no better way how to solve this issue, because Java currently does not provide good way how to describe generic types. The api itself is available on maven central, look for javax.websocket:javax.websocket-api:1.1. The reference implementation is project Tyrus, which implements WebSocket API 1.1 from version 1.8.

  Read the article

• How can I rebuild the index in Thunderbird 3.0?

  - by Martin

  Hello, I have just deleted a lot of old messages (about 3,000) from my Thunderbird 3.0 profile. When I now use the new search feature (search all messages), TB still finds the deleted ones. I deleted them this way: I moved the messages to an own "archive" folder (not the built-in archive feature). Then I stopped TB and moved the archive files and folders to a different place on my file system. Then restarted TB. I archive my messages this way for years now. So, it seems that Thunderbird does not notice the deletion of my messages, thus the index is not updated. How can I tell TB to instantly rebuild the index?

  Read the article

• BizTalk 2009 - How do I do t"HAT"?

  - by StuartBrierley

  In my previous life working with BizTalk Server 2004, I came to view HAT (the Health and Activity Tracking tool) as one of my first ports of call in the case of problems with any of our BizTalk solutions.  When you move to BizTalk Server 2009 it is quickly apparent that HAT is no longer with us. HAT was useful in BizTalk 2004 mainly as it provided developers and administrators with a number of useful queries and views of what was going on inside BizTalk at runtime; when and what type of messages were received and sent, what messages had been suspended, what orchestration were running or suspended, you could even follow the process flow of a message or orchestration to see what was going on. With BizTalk Server 2009 much of the functionality of HAT can now be found in the BizTalk Administration console.  Select a BizTalk Group and you will be shown the Group Hub Overview page.  This provides a number of default queries that replicate some of those found in the old HAT. You can also use the Group Hub page to create new queries.  These can then be saved and loaded in other Group Hub instances - useful for creating queries in development for later use in Test, Psuedo-Live and Live environments. In the next few posts I am going to look at some of the common queries that we might miss from HAT and recreate them (or something close) using the new query option. Messages - last 100 received Messages - last 100 sent Messages - last 50 suspended Service instances - last 100 I have yet to try the updated Admin-HAT-Console in anger, and after using old-HAT for so long it may take some getting uesd to, but so far I would say that moving the HAT functionality into the BizTalk Administration console was probably the correct way to go.  Having one tool as the place to look for the combined functionality on offer certainly seems to be the sensible option.

  Read the article

• MS-Outlook add-on to move a new message to the same folder as the rest of the thread

  - by Guss

  I'm forced to use MS-Outlook in my job, while I very much like the feature that shows all the messages of a discussion thread (that are stored in different folders) in the inbox when a new message is received for that thread, if the previous messages are in a different data file (which I'm forced to have as the MS-Exchange server quota is very very small) then the message list only shows the name of the data file and not the name of the folder where the messages are stored. As a result, because I file my message by context (i.e. all the emails for project A go into a "Project A" folder, etc), and its important for me to have all the messages in a single thread in the same folder, it is sometimes hard to figure out into which folder should I file the new message. It would be great help if there was some add-on or VBA script that I could add to my setup that will offer a shortcut key or a button to "file this message to the same folder as the previous messages in the conversation thread".

  Read the article

• Data Mining Email with Thunderbird

  - by user554629

  Oracle has many formal, searchable locations:  Service Requests, BugIDs, Technical Documents. These contain the results of an investigation for a customer crash situation;  they're created after the intense work of resolution is over, and typically contain the "root cause" of the failure ... but not the methods for identifying that cause. Email is still the standby for interacting with quickly formed groups of specialists, focusing on a particular incident.Customer BI, Network and System specialists;  Oracle Tech Support, Development, Consultants; OEM Database, OS technical support.   It is a chaotic, time-oriented set of configuration, call stacks, changes, techniques to discover and repair the failure. I needed to organize that information into something cohesive to prepare the blog entry on Teradata.  My corporate email client of choice is Thunderbird.   My original (flawed) search technique: R-Click on Inbox in Thunderbird left pane, and choose Search Messages Subject:  [ teradata ] Results: A new window titled "Search Messages"Single pane of selected messagesColumn headings:  Subject  From  Date  LocationNo preview window for messages There are 673 email entries in the result ( too many )  R-click icon just above the vertical scroll bar on the rightCheck [x] Tags Click on the Tags header to sort by "Important" View contents of message by double-clickingOpens in the Thunderbird Main Window in a new Tab Not what I was looking for, close the tab and try again. There has to be a better way.  ( and there is ) I need to be more productive, eliminating duplicate-chained messages, for example.   Even the Tag "Important" that was added during the investigation phase, is "not so much" for my current task. In the "Search Messages" window, click [ Save as Search Folder ] [ teradata ]  Appears as a new folder in my Inbox. Focus on that folder and the results appear with a list of messages like every other folder in the Inbox.Only the results of the search are shown A preview window is now available for each message Sort, Select message, Cursor Down ... navigates quickly through the messages. But wait, there's more ... Click Find ( Ctrl-F) Enter a search term for the message body, like.[ LIBPATH ] The search is "sticky" ... each message you cycle through wil focus ( and highlight) the LIBPATH search term. And still more .... Reset the Tag"Important" message.   Press "1" and the tag is removed Press "4" and a new Tag "ToDo" is applied After applying all of the tags, sort by Tag for a new message order Adjust the search criteria ... R-click on the [ teradata ] search folder, and choose Properties Add additional criteria to narrow the search Some of the information I'm looking for did not contain "teradata" in the subject line. + Body  [ contains ] [ Best Practices ] That's it.  Much more efficient search.   Thank you Thunderbird.

  Read the article

• Thunderbird message sorting - wrong dates

  - by Unsigned

  Thunderbird 3 is having a problem with one of my IMAP accounts. When sorted by date, it displays 10-15 messages at the top (newest) when in fact they are very old message. (pre-2010, over a year old, some up to 6-7 years old) It's not game-breaking, but it is annoying, as I have to look past those to check for "new" messages. Is there any way to fix this? I'd considered re-downloading all the messages via IMAP, but that would take weeks (50,000 messages). When I open it, it displays the correct date, also when I use "View Source" the Date: header has the correct date (2009, 2006, etc). Is there any way to make Thunderbird realize that it should be sorted down with the rest of the 2006/2009 messages? None of my other IMAP accounts (many with the same host server) have this issue.

  Read the article

• Help with Silverlight Sockets and Message delivery

  - by pixel3cs

  There are 4 months since I stopped developing my Silverlight Multiplayer Chess game. The problem was a bug wich I couldn't reproduce. Sice I got some free time this week I managed to discover the problem and I am now able to reproduce the bug. It seems that if I send 10 messages from client, one after another, with no delay between them, just like in the below example // when I press Enter, the client will 10 messages with no delay between them private void textBox_KeyDown(object sender, KeyEventArgs e) { if (e.Key == Key.Enter && textBox.Text.Length > 0) { for (int i = 0; i < 10; i++) { MessageBuilder mb = new MessageBuilder(); mb.Writer.Write((byte)GameCommands.NewChatMessageInTable); mb.Writer.Write(string.Format("{0}{2}: {1}", ClientVars.PlayerNickname, textBox.Text, i)); SendChatMessageEvent(mb.GetMessage()); //System.Threading.Thread.Sleep(100); } textBox.Text = string.Empty; } } // the method used by client to send a message to server public void SendData(Message message) { if (socket.Connected) { SocketAsyncEventArgs myMsg = new SocketAsyncEventArgs(); myMsg.RemoteEndPoint = socket.RemoteEndPoint; byte[] buffer = message.Buffer; myMsg.SetBuffer(buffer, 0, buffer.Length); socket.SendAsync(myMsg); } else { string err = "Server does not respond. You are disconnected."; socket.Close(); uiContext.Post(this.uiClient.ProcessOnErrorData, err); } } // the method used by server to receive data from client private void OnDataReceived(IAsyncResult async) { ClientSocketPacket client = async.AsyncState as ClientSocketPacket; int count = 0; try { if (client.Socket.Connected) count = client.Socket.EndReceive(async); // THE PROBLEM IS HERE // IF SERVER WAS RECEIVE ALL MESSAGES SEPARATELY, ONE BY ONE, THE COUNT // WAS ALWAYS 15, BUT BECAUSE THE SERVER RECEIVE 3 MESSAGES IN 1, THE COUNT // IS SOMETIME 45 } catch { HandleException(client); } client.MessageStream.Write(client.Buffer, 0, count); Message message; while (client.MessageStream.Read(out message)) { message.Tag = client; ThreadPool.QueueUserWorkItem(new WaitCallback(this.processingThreadEvent.ServerGotData), message); totalReceivedBytes += message.Buffer.Length; } try { if (client.Socket.Connected) client.Socket.BeginReceive(client.Buffer, 0, client.Buffer.Length, 0, new AsyncCallback(OnDataReceived), client); } catch { HandleException(client); } } there are sent only 3 big messages, and every big message contain 3 or 4 small messages. This is not the behavior I want. If I put a 100 milliseconds delay between message delivery, everything is work fine, but in a real world scenario users can send messages to server even at 1 millisecond between them. Are there any settings to be done in order to make the client send only one message at a time, or Even if I receive 3 messages in 1, are they full messages all the time (I dont't want to receive 2.5 messages in one big message) ? because if they are, I can read them and treat this new situation

  Read the article

• PHP gettext function only returns orignal untranslated string

  - by Camsoft

  I'm trying to use gettext add localisation support to my website. I've followed various guides on how to setup gettext and have done the following: I've created the following files and directories in the root of my project dir: test.php locale/ de_DE LC_MESSAGES messages.mo messages.po en_GB LC_MESSAGES messages.mo messages.po I've used Poedit to create the above .po and mo files. I've made sue it use Unix line endings, UTF-8 and set the language and country accordingly. I've then created a PHP script called test.php which has the following code: <?php define('LOCALE', 'de_DE'); // Set up environmental variables putenv("LC_ALL=" . LOCALE); setlocale(LC_ALL, LOCALE); bindtextdomain("messages", "./locale"); bind_textdomain_codeset("messages", LOCALE .".utf8"); textdomain("messages"); die(gettext('This is a test.')); ?> I've imported the text "This is a test." to Poedit and supplied the translation and saved it. But for some reason the test.php script will only output the original text untranslated. It refuses to load the version for the translation files. It's worth noting that the server is running Linux (Ubuntu), Apache 2.2.11 and PHP 5.2.6-3ubuntu4.5. I've checked phpinfo() and gettext is enabled. Can someone help me? Thanks.

  Read the article

• nServiceBus - No all commands being received by handler

  - by SimonB

  In a test project based of the nServiceBus pub/sub sample, I've replace the bus.publish with bus.send in the server. The server sends 50 messages with a 1sec wait after each 5 (ie 10 burst of 5 messages). The client does not get all the messages. The soln has 3 projects - Server, Client, and common messages. The server and client are hosted via the nServiceBus generic host. Only a single bus is defined. Both client and server are configured to use StructureMap builder and BinarySerialisation. Server Endpoint: public class EndPointConfig : AsA_Publisher, IConfigureThisEndpoint, IWantCustomInitialization { public void Init() { NServiceBus.Configure.With() .StructureMapBuilder() .BinarySerializer(); } } Server Code : for (var nextId = 1; nextId <= 50; nextId++) { Console.WriteLine("Sending {0}", nextId); IDataMsg msg = new DataMsg { Id = nextId, Body = string.Format("Batch Msg #{0}", nextId) }; _bus.SendLocal(msg); Console.WriteLine(" ...sent {0}", nextId); if ((nextId % 5) == 0) Thread.Sleep(1000); } Client Endpoint: public class EndPointConfig : AsA_Client, IConfigureThisEndpoint, IWantCustomInitialization { public void Init() { NServiceBus.Configure.With() .StructureMapBuilder() .BinarySerializer(); } } Client Clode: public class DataMsgHandler : IMessageHandler<IDataMsg> { public void Handle(IDataMsg msg) { Console.WriteLine("DataMsgHandler.Handle({0}, {1}) - ({2})", msg.Id, msg.Body, Thread.CurrentThread.ManagedThreadId); } } Client and Server App.Config: <MsmqTransportConfig InputQueue="nsbt02a" ErrorQueue="error" NumberOfWorkerThreads="1" MaxRetries="5" /> <UnicastBusConfig DistributorControlAddress="" DistributorDataAddress=""> <MessageEndpointMappings> <add Messages="Test02.Messages" Endpoint="nsbt02a" /> </MessageEndpointMappings> </UnicastBusConfig> All run via VisualStudio 2008. All 50 messages are sent - but after the 1st or 2nd batch. only 1 msg per batch is sent? Any ideas? I'm assuming config or misuse but ....?

  Read the article

• Message queue proxy in Python + Twisted

  - by gasper_k

  Hi, I want to implement a lightweight Message Queue proxy. It's job is to receive messages from a web application (PHP) and send them to the Message Queue server asynchronously. The reason for this proxy is that the MQ isn't always avaliable and is sometimes lagging, or even down, but I want to make sure the messages are delivered, and the web application returns immediately. So, PHP would send the message to the MQ proxy running on the same host. That proxy would save the messages to SQLite for persistence, in case of crashes. At the same time it would send the messages from SQLite to the MQ in batches when the connection is available, and delete them from SQLite. Now, the way I understand, there are these components in this service: message listener (listens to the messages from PHP and writes them to a Incoming Queue) DB flusher (reads messages from the Incoming Queue and saves them to a database; due to SQLite single-threadedness) MQ connection handler (keeps the connection to the MQ server online by reconnecting) message sender (collects messages from SQlite db and sends them to the MQ server, then removes them from db) I was thinking of using Twisted for #1 (TCPServer), but I'm having problem with integrating it with other points, which aren't event-driven. Intuition tells me that each of these points should be running in a separate thread, because all are IO-bound and independent of each other, but I could easily put them in a single thread. Even though, I couldn't find any good and clear (to me) examples on how to implement this worker thread aside of Twisted's main loop. The example I've started with is the chatserver.py, which uses service.Application and internet.TCPServer objects. If I start my own thread prior to creating TCPServer service, it runs a few times, but the it stops and never runs again. I'm not sure, why this is happening, but it's probably because I don't use threads with Twisted correctly. Any suggestions on how to implement a separate worker thread and keep Twisted? Do you have any alternative architectures in mind?

  Read the article

• nServiceBus - Not all commands being received by handler

  - by SimonB

  In a test project based of the nServiceBus pub/sub sample, I've replace the bus.publish with bus.send in the server. The server sends 50 messages with a 1sec wait after each 5 (ie 10 burst of 5 messages). The client does not get all the messages. The soln has 3 projects - Server, Client, and common messages. The server and client are hosted via the nServiceBus generic host. Only a single bus is defined. Both client and server are configured to use StructureMap builder and BinarySerialisation. Server Endpoint: public class EndPointConfig : AsA_Publisher, IConfigureThisEndpoint, IWantCustomInitialization { public void Init() { NServiceBus.Configure.With() .StructureMapBuilder() .BinarySerializer(); } } Server Code : for (var nextId = 1; nextId <= 50; nextId++) { Console.WriteLine("Sending {0}", nextId); IDataMsg msg = new DataMsg { Id = nextId, Body = string.Format("Batch Msg #{0}", nextId) }; _bus.SendLocal(msg); Console.WriteLine(" ...sent {0}", nextId); if ((nextId % 5) == 0) Thread.Sleep(1000); } Client Endpoint: public class EndPointConfig : AsA_Client, IConfigureThisEndpoint, IWantCustomInitialization { public void Init() { NServiceBus.Configure.With() .StructureMapBuilder() .BinarySerializer(); } } Client Clode: public class DataMsgHandler : IMessageHandler<IDataMsg> { public void Handle(IDataMsg msg) { Console.WriteLine("DataMsgHandler.Handle({0}, {1}) - ({2})", msg.Id, msg.Body, Thread.CurrentThread.ManagedThreadId); } } Client and Server App.Config: <MsmqTransportConfig InputQueue="nsbt02a" ErrorQueue="error" NumberOfWorkerThreads="1" MaxRetries="5" /> <UnicastBusConfig DistributorControlAddress="" DistributorDataAddress=""> <MessageEndpointMappings> <add Messages="Test02.Messages" Endpoint="nsbt02a" /> </MessageEndpointMappings> </UnicastBusConfig> All run via VisualStudio 2008. All 50 messages are sent - but after the 1st or 2nd batch. only 1 msg per batch is sent? Any ideas? I'm assuming config or misuse but ....?

  Read the article

• VB dataset issue

  - by Gabriel

  Hi. The idea was to create a message box that stores my user name, message, and post datetime into the database as messages are sent. Soon came to realise, what if the user changed his name? So I decided to use the user id (icn) to identify the message poster instead. However, my chunk of codes keep giving me the same error. Says that there are no rows in the dataset ds2. I've tried my Query on my SQL and it works perfectly so I really really need help to spot the error in my chunk of codes here. Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Dim name As String Dim icn As String Dim message As String Dim time As String Dim tags As String = "" Dim strConn As System.Configuration.ConnectionStringSettings strConn = ConfigurationManager.ConnectionStrings("ufadb") Dim conn As SqlConnection = New SqlConnection(strConn.ToString()) Dim cmd As New SqlCommand("Select * From Message", conn) Dim daMessages As SqlDataAdapter = New SqlDataAdapter(cmd) Dim ds As New DataSet cmd.Connection.Open() daMessages.Fill(ds, "Messages") cmd.Connection.Close() If ds.Tables("Messages").Rows.Count > 0 Then Dim n As Integer = ds.Tables("Messages").Rows.Count Dim i As Integer For i = 0 To n - 1 icn = ds.Tables("Messages").Rows(i).Item("icn") Dim cmd2 As New SqlCommand("SELECT name FROM Member inner join Message ON Member.icn = Message.icn WHERE message.icn = @icn", conn) cmd2.Parameters.AddWithValue("@icn", icn) Dim daName As SqlDataAdapter = New SqlDataAdapter(cmd2) Dim ds2 As New DataSet cmd2.Connection.Open() daName.Fill(ds2, "PosterName") cmd2.Connection.Close() name = ds2.Tables("PosterName").Rows(0).Item("name") message = ds.Tables("Messages").Rows(i).Item("message") time = ds.Tables("Messages").Rows(i).Item("timePosted") tags = time + vbCrLf + name + ": " + vbCrLf + message + vbCrLf + tags Next txtBoard.Text = tags Else txtBoard.Text = "nothing to display" End If End Sub Help will be very much appreciated as I have been on this simple problem for 2 days.

  Read the article

• Symfony 1.3: Any opinion about this code? Coud be shorter or better?

  - by user248959

  Hi, I need your opinion about this code below. I have a list of messages: each message has a link that change the state of the message (read - non read). In the partial "_message" i have this: <div class="switching_link" id="switching_link_<?php echo $message ?>"> echo include_partial('link_switch_state', array('message' => $message)) </div> In the partial "_link_switch_state" i have this: if((int)$message->getState() == 1) { $string_state_message="non read"; } else { $string_state_message="read"; } echo link_to_remote('Mark as '.$string_state_message, array( 'url' => 'message/switchState?id='.$message->getId(), 'update' => 'switching_link_'.$message, "complete" => "switchClassMessage('$message');", )); And in message/actions/actions.class.php i have this: public function executeSwitchState(sfWebRequest $request) { // searching the message we want to change its state. $this->messages = Doctrine::getTable('Message')->findById($request->getParameter('id')); // changing the state of the message. if($this->messages[0]->getState() == 1) { $this->messages[0]->setState(0); } else { $this->messages[0]->setState(1); } $this->messages[0]->save(); // rendering the partial that shows the link ("Mark as read/non read"). return $this->renderPartial('mensaje/link_switch_state', array( 'message' => $this->messages[0])); } Regards Javi

  Read the article

• What do I need to do to set my computer as Default Gateway?

  - by Vaibhav

  We are trying to put together a box with dual LAN cards (let's say Outer and Inner), where the Inner LAN card is supposed to act as a default gateway on the network it is connected to. This box is running Ubuntu. The basic purpose for this box is to take messages generated on the inner network, do some work with them and forward them out the Outer LAN card to a server. The inner network is completely isolated with simply a regular switch connecting the Inner LAN Card with two other boxes. These other boxes either throw out multi-cast messages (which the Inner LAN Card is listening to), or send out unicast messages meant for the server which is not on this inner network. So, we need the Inner LAN Card to act as a default gateway, where these unicast messages will then be sent, and the code on the dual-LAN Card box can then intercept and forward these messages to the server. Question: 1. How do we setup the LAN Card to be default gateway (does it need some configuration on Ubuntu)? 2. Once we have this setup, is it a simple matter of listening to the interface to intercept the incoming messages? Any help (pointers in the right direction) is appreciated. Thanks.

  Read the article

• Move 53,800+ files into 54 separate folders with ~1000 files each?

  - by ane

  Trying to import 53,800+ individual files (messages) using Gmail's POP fetcher. Gmail understandably refuses, giving the error: "Too many messages to download. There are too many messages on the other server." The folder in question looks like similar to: /usr/home/customer/Maildir/cur/1203672790.V57I586f04M867101.mail.net:2,S /usr/home/customer/Maildir/cur/1203676329.V57I586f22M520117.mail.net:2,S /usr/home/customer/Maildir/cur/1203677194.V57I586f26M688004.mail.net:2,S /usr/home/customer/Maildir/cur/1203679158.V57I586f2bM182864.mail.net:2,S /usr/home/customer/Maildir/cur/1203680493.V57I586f33M740378.mail.net:2,S /usr/home/customer/Maildir/cur/1203685837.V57I586f0bM835200.mail.net:2,S /usr/home/customer/Maildir/cur/1203687920.V57I586f65M995884.mail.net:2,S ... Using the shell (tcsh, sh, etc. on FreeBSD), what one-line command can I type to split this directory full of files into separate folders so Gmail only sees 1000 messages at a time? Something with find or ls | xargs mv maybe. Whatever is fastest. The desired output directory would now look something like: /usr/home/customer/Maildir/cur/1203672790.V57I586f04M867101.mail.net:2,S /usr/home/customer/Maildir/cur/1203676329.V57I586f22M520117.mail.net:2,S ... /usr/home/customer/set1/ (contains messages 1-1000) /usr/home/customer/set2/ (contains messages 1001-2000) /usr/home/customer/set3/ (etc.) Ideally, cron could run another command to automatically reverse the process in 1000 message increments every hour. So Gmail only sees & downloads 1000 at a time.

  Read the article

• Linq, double left join and double count

  - by Fabian Vilers

  Hi! I'm looking to translate this SQL statement to a well working & performant LINQ command. I've managed to have the first count working using the grouping count and key members, but don't know how to get the second count. select main.title, count(details.id) as details, count(messages.id) as messages from main left outer join details on main.id = details.mainid left outer join messages on details.id = messages.detailid group by main.title Any advice is welcome! Fabian

  Read the article

• Lots of questions about file I/O (reading/writing message strings)

  - by Nazgulled

  Hi, For this university project I'm doing (for which I've made a couple of posts in the past), which is some sort of social network, it's required the ability for the users to exchange messages. At first, I designed my data structures to hold ALL messages in a linked list, limiting the message size to 256 chars. However, I think my instructors will prefer if I save the messages on disk and read them only when I need them. Of course, they won't say what they prefer, I need to make a choice and justify the best I can why I went that route. One thing to keep in mind is that I only need to save the latest 20 messages from each user, no more. Right now I have an Hash Table that will act as inbox, this will be inside the user profile. This Hash Table will be indexed by name (the user that sent the message). The value for each element will be a data structure holding an array of size_t with 20 elements (20 messages like I said above). The idea is to keep track of the disk file offsets and bytes written. Then, when I need to read a message, I just need to use fseek() and read the necessary bytes. I think this could work nicely... I could use just one single file to hold all messages from all users in the network. I'm saying one single file because a colleague asked an instructor about saving the messages from each user independently which he replied that it might not be the best approach cause the file system has it's limits. That's why I'm thinking of going the single file route. However, this presents a problem... Since I only need to save the latest 20 messages, I need to discard the older ones when I reach this limit. I have no idea how to do this... All I know is about fread() and fwrite() to read/write bytes from/to files. How can I go to a file offset and say "hey, delete the following X bytes"? Even if I could do that, there's another problem... All offsets below that one will be completely different and I would have to process all users mailboxes to fix the problem. Which would be a pain... So, any suggestions to solve my problems? What do you suggest?

  Read the article

• send and receive SMS and developing a SMS panel

  - by Ali Foroughi

  i am working on a SMS panel based on .net framework.i just send some messages to my contacts and received their replies.i want to know witch received message is a reply of witch sent message. ex : if i send A and B messages to 1 contact and then it sends back to me X and Y messages as its reply ,now how i can find out X is a answer for witch one A or B messages.in other hand,what about Y message?!! I need some ideas or personal experiences about send and receive SMS and generating a SMS panel. thanks

  Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >