Search Results

Search found 1167 results on 47 pages for 'modem'.

Page 36/47 | < Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >

• Cannot Access Server from External IP (Router)

  - by mindoftea

  We have an Ubuntu 10.04 LAMP server running on site (Apache is on port 80). It is running fine through the LAN, but I cannot access it using its external IP address through the Netopia 3000 Series modem by which it is connected to the internet. I have tried using what Netopia calls "Pinholes" (Port Forwarding) to make the server accessible, but a telnet to the external address just gives me "connect to address x.x.x.x: Operation timed out." I have also tried enabling "Services" and "IP Passthrough" on the router, but it gives the same result as above. How can I enable the server to be accessed through its external IP address? Because it connects fine locally, it would seem to be a problem with the Netopia router. Update: Booting the server in GUI mode instead of text mode solved the problem instantly. Any ideas why?

  Read the article

• How can I connect Ubuntu Server 10.04 virtualbox without router from my local computer?

  - by kjaja70

  I installed vbox I installed ubuntu server 10.04 on my vbox I want to connect from my win 7 desktop with putty to my server. On the settings in my vm vbos I choose - network. enable network - bridged adapter. I fount in ifconfig the ip address. Putty cant connect to the server. Why? How can I connect Ubuntu Server 10.04 virtualbox from my local computer? p.s. I dont have router - I have modem. Thanks a lot.

  Read the article

• find wireless-repeater ip (router)

  - by Brtrnd

  Really long time ago I set up my dd-wrt router up as a repeater. It works well; in the summer I place it near the garden and I have wifi in the garden. I would like to revisit te settings and see if it would be a good idea to install openvpn. The problem is: I don't remember the ip of the router. I probably followed the setup instructions on the dd wrt wiki. it doesn't show up on the management-console of my main router (a docsis3 modem); it doesn't show up if I do an IP scan of the whole class B; it doesn't show as the gateway when i connect to it (wired or wireless). Any ideas on how I could find the web-interface?

  Read the article

• Interconnection between 2 computers in different networks.

  - by cripox

  Hi, What I want is to connect 2 computers (work and personal) primary for using a software KVM (Input Director or Synergy). Transferring files between them would be a plus. The main issue is that the work computer is in a secured enterprise network, and my personal computer is using a 3G+ modem for Internet access. On the work computer I do not have Internet access (only local network). I want to somehow connect them without to mess up either networks. I want my personal computer to not be seen in the work network. Is it possible? Suggestions: - use a simple UTP cable to connect the 2 computers with each other. Can they each be in both 2 networks without issues? - use some kind of usb cable, if exists

  Read the article

• Social Media event Bandwidth requirements

  - by Bob G

  I have an one day event in July 2012, hosting 250 attendees for a social media event. We will be uploading live video to a website, allowing the press to access the web, and some vendors will be showing off their web sites for clients and visitors. The staff will need access for uploading files and information as needed. We had the event last year and tried a cable modem brought in with 2x2 megs just for the streaming video which worked well. I had 4 wireless hot spots, rented from a company 1.5 mbps x 780 kbps, which was were a complete failure. I was assured the 4 hot spots would be enough, but they did not work. What would be the proper way to get the bandwidth required to make the one day event successful? The setting is a Private Country Club where running cables everywhere is very tough.

  Read the article

• What happens internally in a router when LAN is configured? [closed]

  - by vindhya

  This week I was trying to setup LAN to my home. I couldn't login to the router webpage even though I tried all the username and password like admin etc... I want to ask: Why username and password is required to access modem/router webpage because its always usually admin and admin? What exactly happens inside router when you type correct username and password. Does the router store it internally or does it ask some ISP servers about it? Could someone explain what exactly happens internally in the router right from the configuration phase?

  Read the article

• starting command automaticaly [closed]

  - by aaa

  playing with Debian on raspberry pi. I have a 3g dongle modem on the system and there is a software called sakis3g to connect to internet. I want system to connect to internet automatically every time it starts. It takes about 30-40 seconds to get connected. copied sakis3g to /sbin folder. This command has to be run as root: sakis3g connect parameters blah blah blah I tried to put it in the /etc/rc.local and rebooted system, but no luck. I tried to put it in the crontab as: @reboot sakis3g connect parameters blah blah blah What am I missing here?

  Read the article

• General website publishing questions involving domain forwarding issue

  - by Gorgeousyousuf

  Even though I have been having a certain level of knowledge and experience about web development I have never interested in obtaining a domain and publishing a website from my own server. Since today I have been struggling with getting my own domain and configuring it utilizing web sources. I started with learning the outline of web publishing process including web server installation, deploying a website for testing purpose,router port forwarding, getting a domain and forwarding domain to my router which will also forward http requests to my web server I am confused about some parts and so far could not get the web site accessed from outside of the network. All I try to do is just for learning purpose so I do not pay much attention to security issues for now. I have Server 2008 and IIS 7.5 installed. I use a laptop and have access to the modem over wireless and my modem is Zoom x6 5590. Well I will continue explaining what I have done so far and what I think will be after each action I did, I have successfully had access to my website on any local computer entering the internal ip address and port pair of the host machine in a browser. Next, I forwarded port 80 of my host machine creating a virtual server like 10.0.0.x(internal ip(static) of the host) - tcp - start port : 80 - end port : 80 in router options. Now I suppose every request that will come to the public Ip on port 80 will be forwarded to my host machine(10.0.0.x) over port 80. So If everyhing went as desired, the website listening on port 80 will accept the request and process the issue and finally respond bla bla bla... I suppose to access my website from outside of the network by entering http://MyPublicIp:80 in a browser but I couldn't accomplish this task by now despite using godady's domain forwarding tool,I see a small view of my website when I click the "preview" button that checks whether the address(http://publicip/Index.aspx) I entered where my domain will be forwarded is available or not. I am sure that configuring domain does not play a role in solving such a problem since using public ip and port matching does not help. So here is the first question, What is the fact that I face this problem? After that, I have couple of question regarding domain forwarding using godaddy tool. Can I forward my domain to a any port for example port 8080 other than default http port 80? Additionally, can I use a sub-domain to forward to a different port of the host? What I want to design is if the client enters www.mydomain.com, website1 will respond over a specified port and after when a client enters info.mydomain.com, another website which listens on different port will respond. I tried to add a sub-domain and forward it to a address like http://www.mydomain.com:8080/Index.aspx with no success. Can I really do that? Finally, what if I have a ftp site listening on the default port 21 and I create a domain like ftp.mydomain.com that will forward to that ftp site address. Is it possible to use sub-domains for ftp site access? I know I am more than confused but no matter whatever and however you reply to me, you will help me have a more clear view on this subject. Thank you very much from now.

  Read the article

• PPTP server stuck at "GRE: Bad checksum from pppd"

  - by user92516

  I am a network engineer having quite limited experience with Ubuntu. I have been following up these online instructions to set up a pptp server but without much luck to get it to work. My server is a vm running an Apple Xserve behind a Cisco firewall. I made sure tcp 1723 and GRE are opened for the box. Below is the syslog output, looks like I always got stuck at GRE: Bad checksum from pppd. I'm running Ubuntu 10.04. Sep 24 13:21:53 ubuntu pptpd[1231]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Sep 24 13:21:53 ubuntu pptpd[1231]: CTRL: Reaping child PPP[1232] Sep 24 13:21:53 ubuntu pptpd[1231]: CTRL: Client 166.137.85.165 control connection finished Sep 24 13:22:41 ubuntu pptpd[1276]: MGR: connections limit (100) reached, extra IP addresses ignored Sep 24 13:22:41 ubuntu pptpd[1277]: MGR: Manager process started Sep 24 13:22:41 ubuntu pptpd[1277]: MGR: Maximum of 100 connections available Sep 24 13:22:50 ubuntu pptpd[1278]: CTRL: Client 166.137.85.165 control connection started Sep 24 13:22:51 ubuntu pptpd[1278]: CTRL: Starting call (launching pppd, opening GRE) Sep 24 13:22:51 ubuntu pppd[1279]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Sep 24 13:22:51 ubuntu pppd[1279]: pppd 2.4.5 started by root, uid 0 Sep 24 13:22:51 ubuntu pppd[1279]: Using interface ppp0 Sep 24 13:22:51 ubuntu pppd[1279]: Connect: ppp0 <--> /dev/pts/1 Sep 24 13:22:51 ubuntu pptpd[1278]: GRE: Bad checksum from pppd. Sep 24 13:23:21 ubuntu pppd[1279]: LCP: timeout sending Config-Requests Sep 24 13:23:21 ubuntu pppd[1279]: Connection terminated. Sep 24 13:23:21 ubuntu pppd[1279]: Modem hangup Sep 24 13:23:21 ubuntu pppd[1279]: Exit. Sep 24 13:23:21 ubuntu pptpd[1278]: GRE: read(fd=6,buffer=805a540,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Sep 24 13:23:21 ubuntu pptpd[1278]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Sep 24 13:23:21 ubuntu pptpd[1278]: CTRL: Reaping child PPP[1279] Sep 24 13:23:21 ubuntu pptpd[1278]: CTRL: Client 166.137.85.165 control connection finished

  Read the article

• How do I get this Cisco VPN client to connect?

  - by WebWeasel

  I've got Ubuntu 10.10 64 bit and installed network-manager-vpnc and configured the connection but I keep getting this: NetworkManager[1217]: <info> Starting VPN service 'org.freedesktop.NetworkManager.vpnc'... NetworkManager[1217]: <info> VPN service 'org.freedesktop.NetworkManager.vpnc' started (org.freedesktop.NetworkManager.vpnc), PID 4420 NetworkManager[1217]: <info> VPN service 'org.freedesktop.NetworkManager.vpnc' appeared, activating connections NetworkManager[1217]: <info> VPN plugin state changed: 1 NetworkManager[1217]: <info> VPN plugin state changed: 3 NetworkManager[1217]: <info> VPN connection 'CSI' (Connect) reply received. modem-manager: (net/tun0): could not get port's parent device NetworkManager[1217]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/tun0, iface: tun0) NetworkManager[1217]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/tun0, iface: tun0): no ifupdown configuration found. kernel: [ 2281.723506] tun0: Disabled Privacy Extensions avahi-daemon[1109]: Withdrawing workstation service for tun0. NetworkManager[1217]: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/tun0, iface: tun0) NetworkManager[1217]: <warn> VPN plugin failed: 1 NetworkManager[1217]: <info> VPN plugin state changed: 6 NetworkManager[1217]: <info> VPN plugin state change reason: 0 NetworkManager[1217]: <warn> error disconnecting VPN: Could not process the request because no VPN connection was active. NetworkManager[1217]: <info> Policy set 'Auto eth0' (eth0) as default for IPv4 routing and DNS. NetworkManager[1217]: <info> Starting VPN service 'org.freedesktop.NetworkManager.vpnc'... NetworkManager[1217]: <info> VPN service 'org.freedesktop.NetworkManager.vpnc' started (org.freedesktop.NetworkManager.vpnc), PID 4547 NetworkManager[1217]: <info> VPN service 'org.freedesktop.NetworkManager.vpnc' appeared, activating connections NetworkManager[1217]: <info> VPN plugin state changed: 1 NetworkManager[1217]: <info> VPN plugin state changed: 3 I've seen a couple of bugs on Launchpad that could be the same thing or have I done something wrong?

  Read the article

• System can't sleep, can't shutdown (might be networking related)

  - by Kevin Q

  I speculate it's networking related since I could only shut down my system if I do /etc/init.d/networking stop first. If I tried to put the system to sleep, it disconnect the network then reconnect it automatically, never goes to sleep. I uninstalled the network manager, then /etc/init.d/networking stop will not help shutdown the system anymore. When I boot into the OS, there were some warning about Unknown job:S20acpid,S20network-interface, S20network-manager . I got some advices to do update-rc.d -f to remove all those script, which I am not certain if it's right thing to do. The messages are gone but the problem remains. When I tried to restart, I used to get this message It doesn't seem to be the modem manager since I later removed it. Once upon a time, the fronze shutting down/restarting can be restarted when I presses Ctrl+Alt+Delete, and it says something like networking is stopped externally. If I log in single user mode, and shutdown or reboot, it show this screen I also tried GRUB_CMDLINE_LINUX_DEFAULT = "acpi=force" This is a Ubuntu 12.04 running on Thinkpad T520, not new installation, no such problems occurred before.

  Read the article

• Connecting to MSP430 via /dev/ttyACM0

  - by speciousfool

  I'd like some suggestions about how to fix garbled serial output from a device connected on /dev/ttyACM0. Lately I've been working on a development project making use of TI's MSP430 microcontroller (specifically the eZ430-RF2560). Over on this thread you can see we've been testing some code and have found that the output of the microcontroller over serial is garbled. The btstack provides simple counter test program. When we run the program and look at the serial port output using PuTTY on Windows 7 we see: rfcomm_send_internal cid 117 doesn't exist! BTstack counter 26230 rfcomm_send_internal cid 117 doesn't exist! BTstack counter 26231 However if we connect from various Ubuntu clients we get something like: Stt.R. BTacn 0 BTacn 002BTacn 0 BTcct 04BTtacoe 5BTacun My current belief is that this is because the device is being detected by cdc_acm as a generic USB ACM device. Another thread about a similar microcontroller suggests that the device should use a specific usb serial driver. We've verified that the module is compiled on our system and did a "modprobe ti_usb_3410_5052" but this had no effect on cdc_acm. Here is the relevant section of the kernel's debug log: [ 2735.092987] usb 2-1.2: new full speed USB device number 5 using ehci_hcd [ 2735.213655] cdc_acm 2-1.2:1.0: This device cannot do calls on its own. It is not a modem. [ 2735.213669] cdc_acm 2-1.2:1.0: No union descriptor, testing for castrated device [ 2735.213720] cdc_acm 2-1.2:1.0: ttyACM0: USB ACM device [ 2745.241996] generic-usb 0003:0451:F432.0003: usb_submit_urb(ctrl) failed [ 2745.242023] generic-usb 0003:0451:F432.0003: timeout initializing reports [ 2745.242401] generic-usb 0003:0451:F432.0003: hiddev0,hidraw0: USB HID v1.01 Device [Texas Instruments Texas Instruments MSP-FET430UIF] on usb-0000:00:1d.0-1.2/input1 So, in summary, we'd like to figure out how to properly connect to this device. Also of use may be the appropriate place to file a bug report.

  Read the article

• Unable to connect to wireless internet(wifi) through KDE plasma desktop

  - by Mohammed Arafat Kamaal

  I installed the KDE plasma desktop through Ubuntu software center. I am on Ubuntu Lucid Lynx. After the install, Im unable to connect to my wifi connection in the KDE session. But I can connect to my wifi perfectly through GNOME session. I've tried a lot without much success. Also KDE doesn't store my password correctly and keeps prompting for authorization again and again. Some of the things that I noticed. Network is detected, Network name and strength is also displayed. Other characteristics also appear properly. When the credentials are supplied, it accepts them and continually displays the message "Setting network address". However this process never succeeds. At this stage the password is repeatedly asked many times but the connection is never established. Some of the other things that I did, I have also tried other things like restarting my modem and the computer. That didn't work. I tried to restart nm-applet and KNetworkManager. That didn't work either. ifconfig display all my interfaces and Mac addresses correctly. Since its working fine GNOME the drivers are fine. This is sure a KDE specific issue. Other threads related to this on the interwebs don't offer much information either. Please share a solution for this.

  Read the article

• Preventing battery from charging

  - by intuited

  I'm running on UPS power and would like to prevent the laptop's battery from charging, to increase the amount of power available to other devices. Is there a way to do this? update The machine is a Dell Latitude D400. If people want more details, just ask. Also, I'm gathering that I need to explain my desired setup a little better. I've gotten a bunch of suggestions about taking the battery out. I'm not sure if people are suggesting to take the battery out while the machine is running — this, as I understand, is not a good idea with most laptops — or to just remove the battery altogether. The latter option is not optimal, because ideally I'd like to use the 30-60 minutes of power in the laptop battery and then switch over to UPS power. The details of the switch-over may constitute a separate question, but if I can't find a way to keep the laptop battery from charging, then removing the battery from the machine altogether may be the best way to do this. I'm not sure yet if this machine will run without a battery, but I'll check that out. Other than the laptop, the UPS is just supporting a cable modem and router and a USB hub. Again in the idealized version of this setup, all the power management changes would be automated, i.e. not require replugging anything or pressing Fn-keys. I'd like the machine to start using laptop battery power when apcupsd indicates that the UPS A/C is out, and then start using UPS power, but not charging the battery, when the battery is almost depleted.

  Read the article

• Setting up shared connection

  - by Calvin Froedge

  I have a network that is connected to the internet via a switch connected to a router. I have it setup like this so I can work on the new network without causing problems on the old. Anyway, I'm trying to enable internet connection sharing. Internet comes to server like this: Modem - Router - Switch - Ubuntu 11.10 (Eth0) I want to share the connection through Eth1 (Eth1 - Managed Switch - Clients). Here is my config for /etc/network/interfaces: I have a DHCP server running on Eth1. Here is my config: ddns-update-style none; option domain-name "myserver.local"; option domain-name-servers 192.168.1.2, 8.8.8.8; default-lease-time 600; max-lease-time 7200; authoritative; subnet 192.168.1.0 netmask 255.255.255.0 { interface eth1; range 192.168.1.3 192.168.1.254; option routers 192.168.1.1; option subnet-mask 255.255.255.0; option broadcast-address 192.168.1.255; } Here is /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp #Used for internal network auto eth1 iface eth1 inet static address 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255 network 192.168.1.0 Here is /etc/hosts: 127.0.0.1 localhost 127.0.1.1 myserver.isp.com server 192.168.1.2 server.myserver.local server myserver.local In /etc/sysctl.conf, I've set the following: net.ipv4.ip_forward=1 Finally, in /etc/rc.local, I've set the following: /sbin/iptables -P FORWARD ACCEPT /sbin/iptables --table nat -A POSTROUTING -o eth1 -j MASQUERADE When I ping 8.8.8.8 (google's DNS) from a client that is authenticated with my DHCP server (they have been assigned a local ip, like 192.168.1.10), I get a timeout. How can I debug this further to figure out where my problem is?

  Read the article

• Running 12.04 as a gateway - resolvconf, dhclient and dnsmasq integration

  - by Adam

  I have a gateway server which is set up originally with Ubuntu desktop 12.04 - perhaps a mistake, I don't know, something to bear in mind. I ripped out network-manager and now want to get resolvconf, dhclient and dnsmasq to play well together. dhclient gets the gateway's eth0 WAN ip address and the ISP DNS name server from the modem. dnsmasq needs to serve dhcp to the rest of the lan on eth1 and acts as a DNS cache both for the lan and for the gateway machine. I also set up iptables as a firewall. Right now, the gateway's /etc/resolv.conf shows only name server = 127.0.0.1 which is correct AFAIK. However I don't think that dhclient is giving dnsmasq the ISP DNS name server nor is dnsmasq picking up the OpenDNS and Google name servers I specified in /etc/network/interfaces - at the moment look-ups, i.e. ping or surfing, don't work unless I manually edit /etc/resolv.conf to put in an upstream name server like 8.8.8.8 So I removed the resolvconf package. Now I'm not getting dhcp on my lan and I'm not able to do DNS look-ups on the host itself - I can surf and ping on the net, but not 127.0.0.1. Where do I go from here? This setup with the config for dhclient and dnsmasq, and the same resolv.conf and hosts files worked on my old debian box.

  Read the article

• Is C and Python enough?

  - by gruszczy

  I am very proficient in Python (including Django), which I use for most tasks. I am also quite confident with C; I am maintaining small file system in userspace written in C. Yet when I am browsing job offers I see everywhere Java/C# and sometimes C++. I have coded profesionally in C++ for half a year in a gaming company, but I don't consider myself a pro. Also I simply despise Java and C#, which I would prefer not to touch ever. But it seems to me, that I am at very unfavorable position, when it comes to career. I am browsing careers.stackoverflow.com and I don't see and pure python or C offers. I would like to find a new job abroad in about 6 months. If I find some python offer, it means doing web development (not my favorite job). Does it mean, that I have to quickly start improving my C++ skills, if I wish to find a satisfying job? What would you suggest me? EDIT Learning new technologies is not an issue. Company I am working in is an integrator. Basically every new project requires learning new technologies, sometimes custom made. During last two years I was writing SQLs by hand, using LDAP, writing GUI in Qt, working on large scale DBMS prototype, making our internal help desk system use gsm modem or writing own report system. In previous job I had to learn from basics everything what I could about games development, because I knew nothing and chose this job only because of the challene it posed. I am all about embracing new technologies. I have used Java in the past and simply didn't like it. It's dull and boring. Doesn't let me do anything cool. I have recently seen some C# in action and seems similar. I don't like it. It's like German. I don't like speaking German.

  Read the article

• Missing Wireless access point

  - by nvcnvn

  I have an: Ubuntu 12.04 with proprietary Boardcom STA Wireless driver installed BCM43224 802.11a/b/g/n wireless card TP-LINK TD-W8101G 54Mbps Wireless ADSL2+ Modem Router Yesterday before I went to sleep, I still connect to my wireless access point, this morning when I start my laptop I don't see it in the list - there are some neighbors listed but not mine. The WLAN is green, with my old Nokia E72, I still see my access point with 100% signal. I have tried to restart my laptop and turn the firmware off/on by the switch but no help. I have read the WirelessTroubleShootingGuide but I can do anything. Here is some of my card info: *-network description: Wireless interface product: BCM43224 802.11a/b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: eth1 version: 01 serial: c0:cb:38:06:5d:53 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11abgn resources: irq:17 memory:f0500000-f0503fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 03 serial: f0:4d:a2:42:ab:e4 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168d-1.fw ip=192.168.1.3 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:42 ioport:5000(size=256) memory:f0404000-f0404fff memory:f0400000-f0403fff memory:f0420000-f043ffff

  Read the article

• How can I hard reset a USB device?

  - by Cory

  I have a USB device (a modem) that is really finicky. Sometimes it works fine, but other times it refuses to connect. The only solution I have found to fix it once it gets into a bad state is to physically unplug the device and plug it back in. However, I don't always have physical access to the machine it is plugged in on, so I'm looking for a way to do this through the command line. This post suggests running: sudo modprobe -w -r usb_storage; sudo modprobe usb_storage However I get an "unknown option -w" output. This slightly modified command: sudo modprobe -r usb_storage Fails with the message FATAL: Module usb_storage is in use. If I try to kill -9 the processes marked [usb-storage] before running they refuse to die (I think because they are deeply tied to the kernel). Anyone know of a way to do this? NOTE: I cross-posted this on superuser.com as I didn't know which was more appropriate. I will delete and/or link whichever one is answered first.

  Read the article

• I just moved, have no internet on my laptop or ipod, but everyone else who lives here does

  - by Kay

  I just moved to Thunder Bay and my laptop as well as my ipod cannot connect to the internet. My laptop allows me to write the password for the wifi, but I still have no internet connection. When I try to use the cable, the computer tells me I have a perfect connection, even the icon shows that it's working, but I can't open any web pages or use any internet functions. When I try to use MSN it sends me to a troubleshooting option and informs me that there's some kind of problem with the "gateway". I have unplugged the modem and the router and plugged them back in, this did not help. I am living in a home where all the people are using wifi on the same system as me, and no one has ever had any problems. Back home both my laptop and my ipod worked without a problem both in my home, as well as on campus. Since this problem seems to be limited only to me, it would indicate that there's a problem on my end -- with my laptop. However, in that case my ipod would be working. It has never failed to connect before. Any suggestions would be much appreciated.

  Read the article

• Suddely internet is not accessible

  - by user189708

  I am going crazy here. One day everything was working fine. I turned pc off and went to sleep. Next day turn pc on and cannot access internet (from any browser). The situation is: I cannot open any webpage from browser (tried Firefox and Epiphany) and cannot receive emails in thunderbird. BUT if I run firefox from console as sudo, I can use it as usual. I can access Skype and pretty much any other network stuff (like installing software with apt-get etc.), also if I use Astrill VPN software I can access webpages even running without sudo. I haven't install any software or anything like that for several days = I have not a clue what could cause this. Just by the way, other Win PC in our home has no issue. Here is what I have tried to fix this: I have tried to restart my pc, router, modem - multiple times I have tried to change permissions to my firefox profile I have tried to completely re-install firefox and start with blank profile, thus no addons I have tried to change /etc/resolv.conf to an IP of my router (it was 127.0.1.1) I have tried to change my hostname (from tomino-NB to tominoNB) I think I might try even more stuff. None of it works. Can someone please try to help me. Thank you UPDATE 1: I have tried this: Removing resolv.conf - Didn't help Also "ping" and "dig" commands cannot resolve host UPDATE 2: I have tried to edit nameservers in resolv.conf but still no effect. I can ping router as well as I can ping outside IP. So definitely just some DNS issue. Is it possible that something is rewriting path to resolv.conf and using different file? UPDATE 3: I have just restarted PC and everything works now... resolv.conf went back to nameserver 127.0.1.1 . I have no clue what happened that it works again...

  Read the article

• Is there any way to kill a zombie process without reboot?

  - by Pedram

  Is there any way to kill a zombie process without reboot?Here is how it happens: I wanted to download a 12GB torrent.After adding the .torrent file, transmission turned into a zombie process.I tried ktorrent too.Same behavior.Finally I could download the file using µTorrent but after closing the program, it turns into a zombie as well. I tried using kill skill and pkill with different options and -9 signal but no success. In some answers in web I found out killing the parent can kill the zombie, but killing wine didn't help either. Is there another way? Edit: ps -o pid,ppid,stat,comm PID PPID STAT COMMAND 7121 2692 Ss bash 7317 7121 R+ ps pstree output: init---GoogleTalkPlugi---4*[{GoogleTalkPlug}] +-NetworkManager---dhclient ¦ +-{NetworkManager} +-acpid +-apache2---5*[apache2] +-atd +-avahi-daemon---avahi-daemon +-bonobo-activati---{bonobo-activat} +-clock-applet +-console-kit-dae---63*[{console-kit-da}] +-cron +-cupsd +-2*[dbus-daemon] +-2*[dbus-launch] +-desktopcouch-se---desktopcouch-se +-explorer.exe +-firefox---run-mozilla.sh---firefox-bin---plugin-containe---8*[{plugin-contain}] ¦ +-14*[{firefox-bin}] +-gconfd-2 +-gdm-binary---gdm-simple-slav---Xorg ¦ ¦ +-gdm-session-wor---gnome-session---bluetooth-apple ¦ ¦ ¦ ¦ +-fusion-icon---compiz---sh---gtk-window-deco ¦ ¦ ¦ ¦ +-gdu-notificatio ¦ ¦ ¦ ¦ +-gnome-panel ¦ ¦ ¦ ¦ +-gnome-power-man ¦ ¦ ¦ ¦ +-gpg-agent ¦ ¦ ¦ ¦ +-nautilus---bash ¦ ¦ ¦ ¦ ¦ +-{nautilus} ¦ ¦ ¦ ¦ +-nm-applet ¦ ¦ ¦ ¦ +-polkit-gnome-au ¦ ¦ ¦ ¦ +-2*[python] ¦ ¦ ¦ ¦ +-qstardict---{qstardict} ¦ ¦ ¦ ¦ +-ssh-agent ¦ ¦ ¦ ¦ +-tracker-applet ¦ ¦ ¦ ¦ +-trackerd ¦ ¦ ¦ ¦ +-wakoopa---wakoopa ¦ ¦ ¦ ¦ ¦ +-3*[{wakoopa}] ¦ ¦ ¦ ¦ +-{gnome-session} ¦ ¦ ¦ +-{gdm-session-wo} ¦ ¦ +-{gdm-simple-sla} ¦ +-{gdm-binary} +-6*[getty] +-gnome-keyring-d---2*[{gnome-keyring-}] +-gnome-screensav +-gnome-settings- +-gnome-system-mo---{gnome-system-m} +-gnome-terminal---bash---ssh ¦ +-bash---pstree ¦ +-gnome-pty-helpe ¦ +-{gnome-terminal} +-gvfs-afc-volume---{gvfs-afc-volum} +-gvfs-fuse-daemo---3*[{gvfs-fuse-daem}] +-gvfs-gdu-volume +-gvfsd +-gvfsd-burn +-gvfsd-http +-gvfsd-metadata +-gvfsd-trash +-hald---hald-runner---hald-addon-acpi ¦ ¦ +-hald-addon-cpuf ¦ ¦ +-hald-addon-inpu ¦ ¦ +-hald-addon-stor ¦ +-{hald} +-hotot---xdg-open ¦ +-3*[{hotot}] +-indicator-apple +-indicator-me-se +-indicator-sessi +-irqbalance +-kded4 +-kdeinit4---kio_http_cache_ ¦ +-klauncher +-kglobalaccel +-knotify4 +-modem-manager +-multiload-apple +-mysqld---10*[{mysqld}] +-named---10*[{named}] +-nmbd +-notification-ar +-notify-osd +-pidgin---{pidgin} +-polkitd +-pulseaudio---gconf-helper ¦ +-2*[{pulseaudio}] +-rsyslogd---2*[{rsyslogd}] +-rtkit-daemon---2*[{rtkit-daemon}] +-services.exe---plugplay.exe---2*[{plugplay.exe}] ¦ +-winedevice.exe---3*[{winedevice.exe}] ¦ +-3*[{services.exe}] +-smbd---smbd +-snmpd +-sshd +-timidity +-trashapplet +-udevd---2*[udevd] +-udisks-daemon---udisks-daemon ¦ +-{udisks-daemon} +-upowerd +-upstart-udev-br +-utorrent.exe---8*[winemenubuilder] ¦ +-{utorrent.exe} +-vnstatd +-winbindd---2*[winbindd] +-2*[winemenubuilder] +-wineserver +-wnck-applet +-wpa_supplicant +-xinetd System monitor and top screenshots which show the zombie process is using resources:

  Read the article

• Problem connecting to isp server using xl2tpd as client. Ubuntu server 13.04

  - by Deon Pretorius

  I have followed guides found on google and ubuntu support pages and can get xl2tpd connection up but only under the following conditions: 1 - ADSL model must be configured and connected to the ISP or 2 - ADSL modem in bridge mode I must have an existing PPPoe connection established. If neither of the above are active xl2tpd wont trigger pppd and connect to the isp and thus tunnel connection fails to connect to the L2TP server of the ISP. Am I doing something wrong; /etc/ppp/options.l2tpd.axxess ipcp-accept-local ipcp-accept-remote refuse-eap refuse-chap require-pap noccp noauth idle 1800 mtu 1200 mru 1200 defaultroute usepeerdns debug lock connect-delay 5000 name (name used for ppp connection) /etc/ppp/pap-secrets # * password (name used for ppp connection as above) * (ppp password supplied by isp) /etc/xl2tpd/xl2tpd.conf [global] ; Global parameters: auth file = /etc/xl2tpd/l2tp-secrets ; * Where our challenge secrets are access control = yes ; * Refuse connections without IP match debug tunnel = yes [lac axxess] lns = 196.30.121.50 ; * Who is our LNS? redial = yes ; * Redial if disconnected? redial timeout = 5 ; * Wait n seconds between redials max redials = 5 ; * Give up after n consecutive failures hidden bit = yes ; * User hidden AVP's? length bit = yes ; * Use length bit in payload? require pap = yes ; * Require PAP auth. by peer require chap = no ; * Require CHAP auth. by peer refuse chap = yes ; * Refuse CHAP authentication require authentication = yes ; * Require peer to authenticate name = BLA85003@axxess ; * Report this as our hostname ppp debug = yes ; * Turn on PPP debugging pppoptfile = /etc/ppp/options.l2tpd.axxess ; * ppp options file for this lac /etc/xl2tpd/l2tp-secrets # Secrets for authenticating l2tp tunnels # us them secret # * marko blah2 # zeus marko blah # * * interop * vzb_l2tp (*** secret supplied by isp) ^ isp server host name Any help will be greatly appreciated

  Read the article

• Can't change settings for Mobile Broadband Dongle - Button is greyed out

  - by Ross LIndsey

  I was with VirginBroadband.com.au (Australia). My huawai 3G Dongle was working great on Ubuntu, However I have changed ISP's. I unlocked the modem, and put in the new SIM. I have tested this in my Windows PC and it connects to the new (Optus) Network A-OK and it all works. When I put this dongle (the same one that was working fine in Ubuntu) into that same Ubuntu Netbook it simply won't connect. When I try to go into the dialog to try and add or change settings the button to change or update settings is greyed out, I can't select it. Apparently since this dongle was already recognized the Broadband Setup Wizard won't start, and I have no idea how to get it to start (presuming it has the ability to configure an already recognized dongle). What do I have to do to either enable the ability to change the configuration for this setup, or to blow away the one that is set up so the Broadband Wizard will re-start and let me configure a new one. Can anyone provide simple instructions for doing this? I'm using Ubuntu with the Cinnamon Desktop

  Read the article

• pppoe connection to dsl model

  - by VJo

  Hello, I am connecting to the internet through a pppoe connection, but for some reason I can not connect to my modem (it's address is 192.168.1.1). Before I set my pppoe connection, I could connect. So, is there a way? EDIT The output of ifconfig is : r@PlaviZec:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:13:d4:f7:02:d4 inet6 addr: fe80::213:d4ff:fef7:2d4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2811 errors:0 dropped:0 overruns:0 frame:0 TX packets:2801 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2538831 (2.5 MB) TX bytes:448591 (448.5 KB) Interrupt:21 Base address:0xa000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:28 errors:0 dropped:0 overruns:0 frame:0 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1600 (1.6 KB) TX bytes:1600 (1.6 KB) ppp0 Link encap:Point-to-Point Protocol inet addr:92.229.42.177 P-t-P:213.191.64.59 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 RX packets:2794 errors:0 dropped:0 overruns:0 frame:0 TX packets:2741 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:2476277 (2.4 MB) TX bytes:381240 (381.2 KB)

  Read the article

< Previous Page | 32 33 34 35 36 37 38 39 40 41 42 43  | Next Page >